The legendary café racer is back, with the attitude

The legendary café racer is back, with the attitude, handling and 1200cc power and performance to match
its iconic name.
2016 THRUXTON RANGE
THRUXTON 1200
£10,700.00
Single bullet seat set­up
Switchable ABS
Ride By Wire
Switchable traction control
Torque­Assist Clutch
3 Riding modes
LED DRL Headlight
LED rear light
USB charging socket
Immobiliser
17" front wheel
Clip on bars
Adjustable suspension
Unique fuel tank with flip up
'Monza' cap
Lightweight aluminium bar­end
mirrors, ​wheel rims and swinging
arm
THRUXTON 1200 R
£12,000.00
Single bullet seat set­up with
painted seat cowl
Higher specification brakes and
suspension
Twin floating Brembo discs
Brembo Monobloc radial calipers
Brembo master cylinder
Race bred, fully­adjustable Showa
​big piston forks
Fully adjustable Öhlins twin rear
shocks
Pirelli Diablo Rosso Corsa tyres
More high quality details and
finishes ​with a polished top yoke,
stainless steel tank ​strap, clear
anodized aluminium ​swinging arm
THRUXTON 1200
LUGGAGE
Waxed Cotton Pannier LHS ­ Olive
(A9518097)
RRP £230.00
A durable, water­repellent pannier crafted from genuine leather and olive waxed cotton. This
accessory will enhance the traditional, heritage feel of your Triumph. Featuring antique brass
hardware. It provides 13.8 litres of storage capacity and comes complete with the correct
mounting harness. A Rain Cover (A9950009) is available for purchase separately. Also
available in black or as a pair.
Front Latch Tank Bag
A Front Latch Tank Bag which is required to fit a tank bag to the Thruxton model when no tank
strap is installed.
POA
Waxed Cotton Pannier RHS ­ Black
(A9518098)
RRP £230.00
A durable, water­repellent pannier crafted from genuine leather and black waxed cotton. This
accessory will enhance the traditional, heritage feel of your Triumph. Featuring brushed
gunmetal hardware. It provides 13.8 litres of storage capacity and comes complete with the
correct mounting harness. A Rain Cover (A9950009) is available for purchase separately.
Also available in olive or as a pair.
Waxed Cotton Pannier LHS ­ Black
(A9518099)
RRP £230.00
A durable, water­repellent pannier crafted from genuine leather and black waxed cotton. This
accessory will enhance the traditional, heritage feel of your Triumph. Featuring brushed
gunmetal hardware. It provides 13.8 litres of storage capacity and comes complete with the
correct mounting harness. A Rain Cover (A9950009) is available for purchase separately.
Also available in olive or as a pair.
Waxed Cotton Panniers ­ Olive
(A9518093)
A pair of durable, water­repellent panniers crafted from genuine leather and olive waxed
cotton. They are sure to enhance the traditional, heritage feel of your Triumph. Featuring
RRP £460.00
antique brass hardware. They provide 27.6 litres of storage capacity, 13.8 litres per bag, and
come complete with the correct mounting harness. They can be mounted individually (to the
left or right­hand side) or as a pair. A Rain Cover (A9950009) is available for purchase
separately. Also available in black.
Tank Bag Rain Cover and Pouch
(A9510228)
RRP £15.00
A Rain Cover to keep your tank bag and its contents dry in the event of a heavy downpour. It
includes a branded pouch for compact storage of the cover when not in use, which fits within
the tank bag itself. Designed to feature a transparent window for use with the tank bag's map
pocket.
Waxed Cotton Panniers ­ Black
(A9518092)
RRP £460.00
A pair of durable, water­repellent panniers crafted from genuine leather and black waxed
cotton. They are sure to enhance the traditional, heritage feel of your Triumph. Featuring
brushed gunmetal hardware. They provide 27.6 litres of storage capacity, 13.8 litres per bag,
and come complete with the correct mounting harness. They can be mounted individually (to
the left or right­hand side) or as a pair. A Rain Cover (A9950009) is available for purchase
separately. Also available in olive.
Waxed Cotton Pannier RHS ­ Olive
(A9518096)
RRP £230.00
A durable, water­repellent pannier crafted from genuine leather and olive waxed cotton. This
accessory will enhance the traditional, heritage feel of your Triumph. Featuring antique brass
hardware. It provides 13.8 litres of storage capacity and comes complete with the correct
mounting harness. A Rain Cover (A9950009) is available for purchase separately. Also
available in black or as a pair.
Waxed Cotton Tank Bag ­ Black
(A9518095)
A Tank Bag constructed from durable genuine leather for increased water repellency and
olive waxed cotton for that traditional heritage look. Featuring non­slip base material and felt­
RRP £155.00
backed webbing to protect your fuel tank. Offers 8.5 litres of storage capacity. A separate
waterproof cover is available for more extreme riding conditions. Thruxton 1200 (not Thruxton
1200R) requires the Front Latch Kit (A9798016) to be fitted. Finished in antique brass
hardware. Also available in olive.
Waxed Cotton Tank Bag ­ Olive
(A9518094)
RRP £155.00
A Tank Bag constructed from durable genuine leather for increased water repellency and
olive waxed cotton for that traditional heritage look. Featuring a non­slip base material and
felt­backed webbing to protect your fuel tank. Offers 8.5 litres of storage capacity. A separate
waterproof cover is available for more extreme riding conditions. Thruxton 1200 (not Thruxton
1200R) requires the Front Latch Kit (A9798016) to be fitted. Finished in antique brass
hardware. Also available in black.
Nylon Tank Bag
(A9510142)
A Nylon Tank Bag featuring a non­slip base and felt­backed webbing to protect your fuel tank.
Its lightweight design offers 8.2 litres of storage capacity. Thruxton 1200 (not Thruxton
RRP £85.00
1200R) requires the Front Latch Kit (A9798016) to be fitted. Rain Cover sold separately
(A9510228).
Nylon Panniers
A pair of showerproof Nylon Panniers featuring a quick­release system for your convenience.
(A9518150)
RRP £205.00
They provide 30 litres of storage capacity in total, with each pannier capable of holding 15
litres. The panniers include an internal drawstring divider and zipped pockets in the pannier
lid for those smaller items. Featuring subtle Triumph branding. Comes complete with a Rain
Cover for riding in harsher conditions and all necessary mounting hardware.
COMFORT
Heated Grip Kit
A set of bespoke slimline heated grips that feature integrated dual temperature controls in
(A9638139)
RRP £185.00
the left­hand grip and display your chosen grip setting on the instrument's LCD. They can be
internally wired through your handlebars for a neat installation. The Heated Grip Kit comes
complete with all the mounting hardware and wiring you will need.
Comfort Dual Seat ­ Brown
(A2304964)
Featuring integral 3D Net inserts for optimum weight distribution, the Comfort Dual seat is
designed to improve your riding experience by enhancing your level of comfort. Finished in
RRP £205.00
premium dual fabrics with stitch detailing and an embroidered Triumph logo. Also available
in black.
Handlebar Grips ­ Diamond Knurl ­ Black ­
25.4mm
(A2041441)
A set of moulded rubber grips in a diamond knurl design. Featuring the iconic Triumph logo
in black.
RRP £25.00
Low Handlebar Kit
A set of clip­on style forged aluminium fork leg clamps designed to utilise the original
(A9638129)
RRP £60.00
handlebar tubes and provide a more authentic/sportier bar position. Reduces handlebar
height by 70mm compared to the original equipment handlebars.
Handlebar Grips ­ Diamond Knurl ­ Grey ­
25.4mm
A set of moulded rubber grips in a diamond knurl design. Featuring the iconic Triumph logo
in grey.
(A2041442)
RRP £25.00
Low Rider Seat
(A2304639)
A quilted low rider seat that includes an integral 3D Net insert for optimum weight distribution
to enhance your level of comfort. Designed to offer a lower riding position compared to the
RRP £205.00
standard equipment. Features stitch detailing and embroidered Triumph branding.
Passenger Footpegs ­ Classic
A set of Passenger Footpegs with opposing grip design for optimum performance.
(A9778025)
RRP £45.00
Classically styled with a polished finish to match Thruxton rider footrests.
Rider Footrests ­ Pair
A pair of forged and CNC machined aluminium Rider Footrests that provide exceptional grip
(A9770142)
RRP £60.00
and accentuate the rugged appearance of your Triumph. Finished in anodised gunmetal
grey.
Comfort Rider Seat ­ Brown
(A2304638)
A quilted rider seat with integral 3D Net inserts for optimum weight distribution to enhance
your level of comfort. Featuring stitch detailing and embroidered Triumph branding. Also
RRP £205.00
available in black.
Handlebar Grips ­ Barrel ­ Brown ­ 25mm
(A2041444)
RRP £25.00
A set of moulded rubber barrel­style Handlebar Grips in brown featuring subtle Triumph logo
branding.
Comfort Dual Seat
Featuring integral 3D Net inserts for optimum weight distribution, the Comfort Dual seat is
(A2304076)
RRP £205.00
designed to improve your riding experience by enhancing your level of comfort. Finished in
premium dual fabrics with stitch detailing and an embroidered Triumph logo.
Handlebar Grips ­ Barrel ­ Black ­ 25mm
(A2041443)
A set of moulded rubber barrel­style Handlebar Grips in black featuring subtle Triumph logo
branding.
RRP £25.00
Passenger Footpegs ­ Sport
(A9778035)
A set of alternative Passenger Footrests slimmer in profile to provide a sportier look and feel.
Comes with a polished finish to match Thruxton R rider footrests.
RRP £45.00
Passenger Footrests
A set of forged and machined Passenger Footrests that provide exceptional grip whilst
(A9778041)
RRP £60.00
enhancing the rugged appearance of your Triumph. Finished in anodised gunmetal grey.
Comfort Rider Seat
A quilted rider seat with integral 3D Net inserts for optimum weight distribution to enhance
(T2304363)
RRP £205.00
your level of comfort. Featuring stitch detailing and embroidered Triumph branding. Also
available in brown.
ELECTRICAL
Auxiliary Power Socket
An Auxiliary Power Socket that enables the following to be used: ­ Triumph Battery Optimiser ­
(A9828015)
RRP £25.00
Triumph Heated Clothing Optimate Adapter
(A9930415)
An Optimate Adaptor that comes in handy when used in conjunction with the Triumph
Auxiliary Power Socket (A9938048).
RRP £10.20
Front LED Indicator Kit ­ Medium Stem
(A9838041)
A set of bullet­style Front LED Indicators featuring a turned aluminium bezel, gloss black
body and clear LED lens. Available in a number of different lengths to fit your motorcycle. EU
RRP £60.00
homologated.
Front LED Indicator Kit ­ Short Stem
A set of bullet­style Front LED Indicators featuring a turned aluminium bezel, gloss black
(A9838023)
RRP £60.00
body and clear LED lens. Available in a number of different lengths to fit your motorcycle. EU
homologated.
Phone Holder Kit ­ 70x130mm
A convenient quick­release mobile phone holder that features a multi­adjustable bracket so it
(A9510325)
RRP £50.00
can be mounted on the yoke. The Phone Holder Kit comes complete with an anti­glare visor,
touch­screen compatible window and cable port. It has a splash­resistant design and
includes an additional rain cover. Designed to accommodate devices up to 70 by 130 mm.
Rear LED Indicator Kit ­ Short Stem
(A9838039)
A set of bullet­style Rear LED Indicators featuring a turned aluminium bezel, gloss black
body and clear LED lens. Available in a number of different lengths to fit your motorcycle. EU
RRP £60.00
homologated.
Clear Indicator Lens Kit
A complete injection­moulded lens and bulb kit that enables you to convert your amber
(A2709046)
RRP £25.00
lenses to clear.
Phone Holder Kit ­ 140x90mm
A convenient quick­release mobile phone holder that features a multi­adjustable bracket so it
(A9510323)
RRP £50.00
can be mounted on the yoke. The Phone Holder Kit comes complete with an anti­glare visor,
touch­screen compatible window and cable port. It has a splash­resistant design and
includes an additional rain cover. Designed to accommodate devices up to 140 by 90 mm.
Triumph Battery Optimiser
(A9930410)
Automatic Battery Optimiser for lead acid batteries.
RRP £55.00
UK Model
Phone Holder Kit ­ 160x100mm
(A9510324)
A convenient quick­release mobile phone holder that features a multi­adjustable bracket so it
can be mounted on the yoke. The Phone Holder Kit comes complete with an anti­glare visor,
RRP £50.00
touch­screen compatible window and cable port. It has a splash­resistant design and
includes an additional rain cover. Designed to accommodate devices up to 160 by 90 mm.
PERFORMANCE
Finned Header Rings ­ Vapour Blasted
(A9600753)
Cast aluminium Finned Header Rings that enhance the authentic look of your Triumph.
Vapour blasted finished.
RRP £60.00
Chrome Stainless Steel Slip­ons ­ EU
A pair of stainless steel chrome plated silencers manufactured by exhausts specialists
(A9600533)
RRP £610.00
Vance & Hines. Designed to be shorter and lighter than the original equipment exhaust.
Fixed dB killers. EU Homologated.
Black Ceramic Slip­ons ­ US
A pair of stainless steel silencers in a black ceramic coating manufactured by exhausts
(A9600506)
RRP £610.00
specialists Vance & Hines. Designed to be shorter and lighter than the original equipment
exhaust, and engineered to offer a larger tailpipe diameter. Removable dB killers. US
Homologated (EPA/CARB).
Finned Header Rings ­ Black
(A9600610)
Cast aluminium Finned Header Rings that enhance the authentic look of your Triumph.
Finished in black.
RRP £60.00
Chrome Stainless Steel Slip­ons ­ US
(A9600521)
RRP £560.00
A pair of stainless steel chrome plated silencers manufactured by exhausts specialists
Vance & Hines. Designed to be shorter and lighter than the original equipment exhaust.
Removable dB killers. US Homologated (EPA/CARB).
Black Ceramic Slip­ons ­ EU
A pair of stainless steel silencers in a black ceramic coating manufactured by exhausts
(A9600512)
RRP £665.00
specialists Vance & Hines. Designed to be shorter and lighter than the original equipment
exhaust. Fixed dB killers. EU Homologated.
Black Ceramic Exhaust Headers, Pair
(A9600650)
A pair of stainless steel exhaust headers styled to complement your accessory silencer
option. Black ceramic coating.
RRP £255.00
PROTECTION
Knee Pads
(A9798017)
A set of self­adhesive, durable rubber knee pads featuring the Triumph logo. The pads not
only protect the side of the tank from rubbing, but also increase your comfort and grip.
RRP £55.00
CNC Machined Fork Protectors
A set of CNC Machined Fork Protectors that feature anodised aluminium spacers with laser­
(A9640107)
RRP £40.00
etched detailing and acetyl sliders. Designed to protect fork legs in the event of a fall.
270mm U Lock
(A9810023)
A high Quality, 270mm U lock for the ultimate bike security. Manufactured in the EU. SRA
Approved/Sold Secure.
RRP £110.00
Alarm Kit ­ Thatcham Approved
A Thatcham approved (Category 2­1) bespoke alarm upgrade developed with Datatool. It is
(A9808119)
RRP £300.00
designed to be installed on the motorcycle whilst ensuring the integrity of the wiring harness.
The kit features resin filled water and vibration resistant construction.
Aluminium Chain Guard ­ Silver
A hard­wearing fabricated aluminium Chain Guard with a clear anodised finish. Also
(A2054007)
RRP £70.00
available in black anodised and anodised gunmetal grey.
Aluminium Chain Guard ­ Black
(A2054009)
RRP £70.00
Styled aluminium Chain Guard with a black anodised finish. Also available in clear anodised
and anodised gunmetal grey.
U Lock Kit ­ 320mm
(A9810024)
High Quality, 320mm U lock for the ultimate bike security. Manufactured in the EU. SRA
Approved/Sold Secure.
RRP £130.00
Aluminium Sump Plate ­ Clear Anodised
A brushed alloy Aluminium Sump Plate that not only adds to that heritage race feel but also
(A9708340)
RRP £100.00
protects your motorbike from stone chips. With a clear finish but also available in black
anodised.
U Lock Mounting Kit
(A9819005)
A fabricated mounting bracket for stowing your Triumph U Lock when not in use.
RRP £20.00
Engine Protector Kit
A set of hard­wearing glass filled Nylon Engine Covers that will protect the lower section of
(A9618149)
RRP £50.00
the engine in the event of a drop. They are engineered to comply with race regulations for
track use. Their subtle styling ensure they are as inconspicuous as possible.
Aluminium Sump Plate ­ Black Anodised
(A9708380)
RRP £100.00
A brushed alloy Aluminium Sump Plate that not only adds to that heritage race feel but also
protects your motorbike from stone chips. In a durable black anodised finish, but also
available in clear.
Aluminium Chain Guard ­ Gunmetal
(A2054008)
A hard­wearing fabricated aluminium Chain Guard with a gunmetal grey anodised finish.
Also available in black anodised and clear anodised.
RRP £70.00
Triumph Disc Lock
High quality, forged Disc Lock and carry pouch. Manufactured in the EU. SRA Approved/Sold
(A9810022)
RRP £80.00
Secure.
Brushed Clutch Badge
(A9610256)
RRP £35.00
A cast aluminium Clutch Badge with minimalistic Triumph branding to subtly enhance your
motorcycle's style. It can be attached to your Triumph in place of the original part. Brushed
finish, but other finishes and styles are available.
STYLING
Black Clutch Badge
A cast aluminium Clutch Badge with minimalistic Triumph branding to subtly enhance your
(A9610257)
RRP £35.00
motorcycle's style. It can be attached to your Triumph in place of the original part. Dark finish,
but other finishes and styles are available.
Café Racer Fairing
(A9708301)
A four­piece injection moulded Café Racer Fairing that comes complete with a hard coated
screen and fabricated aluminium subframe. Ideal for that classic authentic racer look.
RRP £665.00
Includes Clip­on Low Handlebar Kit.
Stealth Sprocket ­ 42T
(A2018942)
This 2­piece replacement Sprocket is manufactured using the finest grade aluminium. It is
designed to be 11% lighter than the original equipment part and is finished in black.
RRP £65.00
Dimensions: Ø125 PCD 42T 525
Clutch Cable Guide ­ Gunmetal
A CNC machined aluminium Clutch Cable Guide bracket designed to replace the original
(A9610302)
RRP £30.00
part. Featuring laser­etched Triumph logo branding and a gunmetal grey anodised finish.
Also available in black and clear.
Camshaft Cover Kit ­ Black
A hard­wearing Camshaft Cover Kit designed as an alternative to the original equipment part.
(A9618197)
RRP £80.00
Finished in powder coat black.
Valve Caps ­ Laser Etched Chrome
(A2009006)
A pair of Chrome plated Valve Caps featuring laser­etched Triumph logo detailing in chrome.
A resin logo option is also available.
RRP £10.00
Black Wheels
(A9648041)
A replacement wheel set that creates a more contemporary custom look for your motorcycle.
Finished in gloss black.
RRP £1,020.00
Available from September 2016
Dresser Bar ­ Graphite
(A9788023)
A set of fabricated Dresser Bars that add to the classical style of your Triumph. Featuring a
powder coated graphite grey finish, but also available in chrome and black.
RRP £115.00
Headbolt Covers ­ Silver
(A9610277)
A set of four CNC machined Headbolt Covers featuring subtle Triumph branding. Finished in
anodised clear, but also available in black and gunmetal grey.
RRP £35.00
Leather Tank Strap ­ Black
A genuine Leather Tank Strap with a brushed and drilled stainless steel band. Also available
(A9798010)
RRP £60.00
in brown
Bar End Mirror ­ Black Anodised
(A9630205)
A Bar End Mirror kit featuring tinted mirror glass and laser­etched Triumph branding. This
accessory is sold individually and can be fitted on either side of the handlebars. Black
RRP £85.00
anodised finish, but also available in clear anodised.
Clutch Cable Guide ­ Clear Anodised
(A9610303)
RRP £30.00
A CNC machined aluminium Clutch Cable Guide bracket designed to replace the original
part. Featuring laser­etched Triumph logo branding and a clear anodised finish. Also
available in black and gunmetal grey.
Dresser Bar ­ Black
A set of fabricated classically styled Dresser Bars finished in powder coat black.
(A9788022)
RRP £115.00
Cover Fasteners ­ Black
(A9618190)
A replacement set of Cover Fasteners for use on both left and right­hand engine covers.
Coated in black.
RRP £30.00
Adjustable Lever Kit ­ Long
(A9628053)
A set of CNC machined, billet aluminium brake and clutch levers that replace the standard
equipment items. The Adjustable Lever Kit features laser­etched Triumph branding and an
RRP £155.00
anodised black and red finish.
Chrome TPS Cover
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610247)
RRP £35.00
equipment part. It features a contemporary design with Triumph branding in a chrome finish.
Other finishes and styles also available.
Clear Fly Screen
A short scratch­resistant Clear Fly Screen that transmits 100% of the light. It requires the
(A9708303)
RRP £70.00
Flyscreen Mounting Kit to be fitted. Height: 188 mm Width: 245 mm
Bar End Mirror ­ Clear Anodised
(A9630206)
A Bar End Mirror kit featuring tinted mirror glass and laser­etched Triumph branding. This
accessory is sold individually and can be fitted on either side of the handlebars. Clear
RRP £85.00
anodised finish, but also available in black anodised.
Black ACG Badge
(A9610265)
A cast aluminium ACG Badge with minimalistic Triumph branding to subtly enhance your
motorcycle's style. It can be attached to your Triumph in place of the original part. Dark finish,
RRP £25.00
but other finishes and styles are available.
Engine Cover Kit ­ Chrome
A complete set of side Engine Covers designed to replace the original equipment item.
(A9618185)
RRP £280.00
Finished in high quality chrome, but also available in black and brushed.
Black Intake Cover
An Intake Cover that serves as a direct replacement for the original equipment part. Featuring
(A9618183)
RRP £35.00
a gloss black powder coat finish to achieve a stealthier look
Leather Tank Strap ­ Brown
(A9798011)
A genuine Leather Tank Strap with a brushed and drilled stainless steel band. Also available
in black
RRP £60.00
Engine Cover Kit ­ Black
A complete set of side Engine Covers designed to replace the original equipment item.
(A9618184)
RRP £255.00
Finished in textured black, but also available in brushed and chrome.
Brushed TPS Cover
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610248)
RRP £35.00
equipment part. It features a contemporary design with Triumph branding in a brushed finish.
Other finishes and styles also available.
Bar End Mirror Black Anodised
(A9638133)
A bar end mounted round mirror that can be mounted to either side of the handlebar. Sold
individually. In a black anodised finished.
RRP £70.00
Black ACG Badge ­ Ribbed
(A9610261)
A cast aluminium ACG Badge that subtly enhances your motorcycle's style. It can be attached
to your Triumph in place of the original part. Features Triumph branding on a glossy black
RRP £30.00
backing and a dark finish with ribbed detailing. Other finishes and styles are available.
Brushed ACG Badge ­ Ribbed
A cast aluminium ACG Badge that subtly enhances your motorcycle's style. It can be attached
(A9610260)
RRP £30.00
to your Triumph in place of the original part. Features Triumph branding on a glossy black
backing and a brushed finish with ribbed detailing. Other finishes and styles are available.
Rear Wheel Adjuster Kit ­ Black
A machined and anodised Rear Wheel Adjuster Kit to replace the original equipment part.
(A9648036)
RRP £25.00
Finished in black, but also available in grey.
Machined Oil Filler Cap ­ Clear Anodised
(A9610241)
A CNC machined aluminium Oil Filler Cap that features laser­etched branding with vertical
knurling to aid removal. Finished in anodised clear, but also available in black and gunmetal
RRP £15.00
grey.
Bar End Finishers­ Black
(A9630437)
RRP £25.00
A pair of turned aluminium Bar End Finishers finished in black. Also available in alternative
colours to complement your choice of Bar End Mirrors. Required to be fitted with an
Accessory Bar End Mirror.
Chrome TPS Cover ­ Ribbed
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610347)
RRP £40.00
equipment part. It features a classic, ribbed design with Triumph branding in a chrome
finish. Other finishes and styles also available.
Brushed TPS Cover ­ Ribbed
(A9610348)
A decorative cast aluminium Throttle Body Finisher designed to replace the original
equipment part. It features a classic, ribbed design with Triumph branding in a brushed
RRP £40.00
finish. Other finishes and styles also available.
Painted Seat Cowl
(A9708333)
A Painted Seat Cowl, colour co­ordinated to complement your Thruxton's style and provide
that classic racer image. Featuring hidden fixings for a clean look. Cannot be installed with
RRP £100.00
the Grab Rails, Luggage Rack or Twin Seat options.
Inspection Cover
An Inspection Cover designed as a direct replacement for the original equipment part.
(A9618194)
RRP £10.00
Featuring a ribbed design and finished in black.
CNC Machined Reservoir Cap
A CNC Machined Reservoir Cap that is designed to replace the original equipment part.
(A2026055)
RRP £35.00
Featuring 3D etched Triumph logo branding and finished in anodised black and raw
machine aluminium.
Chrome ACG Badge
(A9610263)
A cast aluminium ACG Badge with minimalistic Triumph branding to subtly enhance your
motorcycle's style. It can be attached to your Triumph in place of the original part. Chromed
RRP £25.00
finish, but other finishes and styles are available.
Valve Caps ­ Bubble Badge Black
(A2009037)
RRP £10.00
A pair of Aluminium Valve Caps featuring a resin logo badge in black. A Laser­etched option
is also available.
Bar End Finishers ­ Red
Turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar
(A9630439)
RRP £25.00
End Mirror Options. Sold as a pair. Required to be fitted with an Accessory Bar End Mirror.
Black TPS Cover ­ Ribbed
(A9610349)
A decorative cast aluminium Throttle Body Finisher designed to replace the original
equipment part. It features a classic, ribbed design with Triumph branding in a black finish.
RRP £40.00
Other finishes and styles also available.
Valve Caps ­ Bubble Badge Chrome
(A2009007)
A pair of Brass Valve Caps featuring a resin logo badge in chrome. A Laser­etched option is
also available.
RRP £10.00
Clutch Cable Guide ­ Black
A CNC machined aluminium Clutch Cable Guide bracket designed to replace the original
(A9610301)
RRP £30.00
part. Featuring laser­etched Triumph logo branding and a black anodised finish. Also
available in gunmetal grey and clear.
Dresser Bar ­ Chrome
A set of fabricated Dresser Bars that add to the classical style of your Triumph. Featuring a
(A9788015)
RRP £130.00
high gloss chrome finish, but also available in black and graphite grey.
Chrome Clutch Badge ­ Ribbed
(A9610251)
A cast aluminium Clutch Badge that subtly enhances your motorcycle's style. It can be
attached to your Triumph in place of the original part. Features Triumph branding on a glossy
RRP £40.00
black backing and a chromed finish with ribbed detailing. Other finishes and styles are
available.
Machined Oil Filler Cap ­ Black Anodised
(A9610239)
A CNC machined aluminium Oil Filler Cap that features laser­etched branding with vertical
knurling to aid removal. Finished in anodised black, but also available in gunmetal grey and
RRP £15.00
clear.
Machined Oil Filler Cap ­ Gunmetal Anodised
A CNC machined aluminium Oil Filler Cap that features laser­etched branding with vertical
(A9610240)
RRP £15.00
knurling to aid removal. Finished in anodised gunmetal, but also available in black and clear.
Flyscreen Mounting Kit
(A9708131)
A minimalist Mounting Kit to facilitate the fitment of accessory flyscreens blades.
RRP £30.00
Headbolt Covers ­ Black
(A9610275)
A set of four CNC machined Headbolt Covers featuring subtle Triumph branding. Finished in
anodised black, but also available in gunmetal grey and clear.
RRP £35.00
Black TPS Cover
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610249)
RRP £35.00
equipment part. It features a contemporary design with Triumph branding in a black finish.
Other finishes and styles also available.
Rear Wheel Adjuster Kit ­ Grey
(A9648037)
A machined and anodised Rear Wheel Adjuster Kit to replace the original equipment part.
Finished in grey, but also available in black.
RRP £25.00
Black Clutch Badge ­ Ribbed
(A9610253)
A cast aluminium Clutch Badge that subtly enhances your motorcycle's style. It can be
attached to your Triumph in place of the original part. Features Triumph branding on a glossy
RRP £40.00
black backing and a dark finish with ribbed detailing. Other finishes and styles are available.
Dark Tinted Flyscreen
A short scratch­resistant Dark Tinted flyscreen that transmits 25% of the light. It requires the
(A9708151)
RRP £70.00
Flyscreen Mounting Kit to be fitted. Height: 188 mm Width: 245 mm
Camshaft Cover Kit ­ Chrome
A Camshaft Cover Kit designed as an alternative to the original equipment part. Finished in
(A9618150)
RRP £120.00
high gloss chrome.
Bar End Finishers ­ Clear Anodised
(A9630438)
A pair of turned aluminium Bar End Finishers with a clear anodised finish. Also available in
alternative colours to complement your choice of Bar End Mirrors. Required to be fitted with
RRP £25.00
an Accessory Bar End Mirror.
Brushed ACG Badge
A cast aluminium ACG Badge with minimalistic Triumph branding to subtly enhance your
(A9610264)
RRP £25.00
motorcycle's style. It can be attached to your Triumph in place of the original part. Brushed
finish, but other finishes and styles are available.
Valve Caps ­ Laser Etched Black
A pair of Aluminium Valve Caps featuring laser­etched Triumph logo detailing in black. A
(A2009036)
RRP £10.00
resin logo option is also available.
Black Headlight Bezel
(A9838240)
A Headlight Bezel designed as a direct replacement for the original equipment. Finished in
black. Complete the look by combining it with the Black Headlight Bowl.
RRP £40.00
Clear Touring Screen
(A9708408)
A scratch­resistant Clear Longhaul Screen that provides increased wind protection. It
transmits 100% of the light. Requires Flyscreen Mounting Kit to be fitted. Height: 249 mm
RRP £70.00
Width: 262 mm
Bar End Finishers ­ Grey
A pair of turned aluminium Bar End Finishers finished in grey. Also available in alternative
(A9630440)
RRP £25.00
colours to complement your choice of Bar End Mirrors. Required to be fitted with an
Accessory Bar End Mirror.
Chrome Clutch Badge
A cast aluminium Clutch Badge with minimalistic Triumph branding to subtly enhance your
(A9610255)
RRP £35.00
motorcycle's style. It can be attached to your Triumph in place of the original part. Chromed
finish, but other finishes and styles are available.
Sprocket Cover ­ Chrome
(A9618195)
A high quality chrome Sprocket Cover designed to replace the standard equipment on
Thruxton models.
RRP £85.00
Headbolt Covers ­ Gunmetal
(A9610276)
RRP £35.00
A set of four CNC machined Headbolt Covers featuring subtle Triumph branding. Finished in
anodised gunmetal grey, but also available in clear and black.
Chrome ACG Badge ­ Ribbed
A cast aluminium ACG Badge that subtly enhances your motorcycle's style. It can be attached
(A9610259)
RRP £30.00
to your Triumph in place of the original part. Features Triumph branding on a glossy black
backing and a chromed finish with ribbed detailing. Other finishes and styles are available.
Front Fork Brace
(A2041204)
An aluminium Fork Brace that gives your motorcycle that competition look. Featuring CNC
machined detailing with the iconic Triumph logo. There is no need to remove the front forks
RRP £70.00
to install the Brace.
Fender Removal Kit
(A9708352)
A Fender Removal Kit designed to radically alter the rear end of the bike. It comes complete
with a forged aluminium mount, license plate mount, compact LED tail and number plate
RRP £155.00
lights. EU Homologated.
Short Tinted Flyscreen
A short light Tinted Flyscreen that transmits 75% of the light. It requires the Flyscreen
(A9708407)
RRP £70.00
Mounting Kit to be fitted. Height: 188 mm Width: 245 mm
Paddock Stand Bobbins ­ Black
A set of turned aluminium Paddock Stand Bobbins finished in anodised black.
(A9640048)
RRP £15.00
Colour­coordinated Flyscreen
A short flyscreen that provides an additional styling feature to your bike. Colour co­ordinated.
(A9708381)
RRP £114.00
Requires Flyscreen Mounting Kit to be fitted. Height: 188 mm Width: 245 mm
Brushed Clutch Badge ­ Ribbed
(A9610252)
A cast aluminium Clutch Badge that subtly enhances your motorcycle's style. It can be
attached to your Triumph in place of the original part. Features Triumph branding on a glossy
RRP £40.00
black backing and a brushed finish with ribbed detailing. Other finishes and styles are
available.
Tall Tinted Flyscreen
(A9708409)
A tall light Tinted Flyscreen that provides increased wind protection. It transmits 75% of the
light. Height: 249 mm Width: 262 mm
RRP £70.00
THRUXTON 1200 R
LUGGAGE
Waxed Cotton Pannier LHS ­ Olive
A durable, water­repellent pannier crafted from genuine leather and olive waxed cotton. This
(A9518097)
accessory will enhance the traditional, heritage feel of your Triumph. Featuring antique brass
RRP £230.00
hardware. It provides 13.8 litres of storage capacity and comes complete with the correct
mounting harness. A Rain Cover (A9950009) is available for purchase separately. Also
available in black or as a pair.
Waxed Cotton Pannier RHS ­ Black
A durable, water­repellent pannier crafted from genuine leather and black waxed cotton. This
(A9518098)
accessory will enhance the traditional, heritage feel of your Triumph. Featuring brushed
RRP £230.00
gunmetal hardware. It provides 13.8 litres of storage capacity and comes complete with the
correct mounting harness. A Rain Cover (A9950009) is available for purchase separately.
Also available in olive or as a pair.
Waxed Cotton Pannier LHS ­ Black
A durable, water­repellent pannier crafted from genuine leather and black waxed cotton. This
(A9518099)
accessory will enhance the traditional, heritage feel of your Triumph. Featuring brushed
RRP £230.00
gunmetal hardware. It provides 13.8 litres of storage capacity and comes complete with the
correct mounting harness. A Rain Cover (A9950009) is available for purchase separately.
Also available in olive or as a pair.
Waxed Cotton Panniers ­ Olive
A pair of durable, water­repellent panniers crafted from genuine leather and olive waxed
(A9518093)
cotton. They are sure to enhance the traditional, heritage feel of your Triumph. Featuring
RRP £460.00
antique brass hardware. They provide 27.6 litres of storage capacity, 13.8 litres per bag, and
come complete with the correct mounting harness. They can be mounted individually (to the
left or right­hand side) or as a pair. A Rain Cover (A9950009) is available for purchase
separately. Also available in black.
Tank Bag Rain Cover and Pouch
A Rain Cover to keep your tank bag and its contents dry in the event of a heavy downpour. It
(A9510228)
includes a branded pouch for compact storage of the cover when not in use, which fits within
RRP £15.00
the tank bag itself. Designed to feature a transparent window for use with the tank bag's map
pocket.
Waxed Cotton Panniers ­ Black
A pair of durable, water­repellent panniers crafted from genuine leather and black waxed
(A9518092)
cotton. They are sure to enhance the traditional, heritage feel of your Triumph. Featuring
RRP £460.00
brushed gunmetal hardware. They provide 27.6 litres of storage capacity, 13.8 litres per bag,
and come complete with the correct mounting harness. They can be mounted individually (to
the left or right­hand side) or as a pair. A Rain Cover (A9950009) is available for purchase
separately. Also available in olive.
Waxed Cotton Pannier RHS ­ Olive
A durable, water­repellent pannier crafted from genuine leather and olive waxed cotton. This
(A9518096)
RRP £230.00
accessory will enhance the traditional, heritage feel of your Triumph. Featuring antique brass
hardware. It provides 13.8 litres of storage capacity and comes complete with the correct
mounting harness. A Rain Cover (A9950009) is available for purchase separately. Also
available in black or as a pair.
Waxed Cotton Tank Bag ­ Black
(A9518095)
A Tank Bag constructed from durable genuine leather for increased water repellency and
olive waxed cotton for that traditional heritage look. Featuring non­slip base material and felt­
RRP £155.00
backed webbing to protect your fuel tank. Offers 8.5 litres of storage capacity. A separate
waterproof cover is available for more extreme riding conditions. Thruxton 1200 (not Thruxton
1200R) requires the Front Latch Kit (A9798016) to be fitted. Finished in antique brass
hardware. Also available in olive.
Waxed Cotton Tank Bag ­ Olive
A Tank Bag constructed from durable genuine leather for increased water repellency and
(A9518094)
olive waxed cotton for that traditional heritage look. Featuring a non­slip base material and
RRP £155.00
felt­backed webbing to protect your fuel tank. Offers 8.5 litres of storage capacity. A separate
waterproof cover is available for more extreme riding conditions. Thruxton 1200 (not Thruxton
1200R) requires the Front Latch Kit (A9798016) to be fitted. Finished in antique brass
hardware. Also available in black.
Nylon Tank Bag
A Nylon Tank Bag featuring a non­slip base and felt­backed webbing to protect your fuel tank.
(A9510142)
Its lightweight design offers 8.2 litres of storage capacity. Thruxton 1200 (not Thruxton
RRP £85.00
1200R) requires the Front Latch Kit (A9798016) to be fitted. Rain Cover sold separately
(A9510228).
Nylon Panniers
A pair of showerproof Nylon Panniers featuring a quick­release system for your convenience.
(A9518150)
They provide 30 litres of storage capacity in total, with each pannier capable of holding 15
RRP £205.00
litres. The panniers include an internal drawstring divider and zipped pockets in the pannier
lid for those smaller items. Featuring subtle Triumph branding. Comes complete with a Rain
Cover for riding in harsher conditions and all necessary mounting hardware.
COMFORT
Handlebar Grips ­ Barrel ­ Brown ­ 22mm
A set of moulded rubber barrel­style Handlebar Grips in brown featuring subtle Triumph logo
(A2041479)
branding.
RRP £25.00
Handlebar Grips ­ Barrel ­ Black ­ 22mm
A set of moulded rubber barrel­style Handlebar Grips in black featuring subtle Triumph logo
(A2041478)
branding.
RRP £25.00
Comfort Dual Seat ­ Brown
Featuring integral 3D Net inserts for optimum weight distribution, the Comfort Dual seat is
(A2304964)
RRP £205.00
designed to improve your riding experience by enhancing your level of comfort. Finished in
premium dual fabrics with stitch detailing and an embroidered Triumph logo. Also available
in black.
Low Handlebar Kit
A set of clip­on style forged aluminium fork leg clamps designed to utilise the original
(A9638108)
handlebar tubes and provide a more authentic/sportier bar position. Reduces handlebar
RRP £60.00
height by 70mm compared to the original equipment handlebars.
Low Rider Seat
(A2304639)
A quilted low rider seat that includes an integral 3D Net insert for optimum weight distribution
to enhance your level of comfort. Designed to offer a lower riding position compared to the
RRP £205.00
standard equipment. Features stitch detailing and embroidered Triumph branding.
Passenger Footpegs ­ Classic
A set of Passenger Footpegs with opposing grip design for optimum performance.
(A9778025)
Classically styled with a polished finish to match Thruxton rider footrests.
RRP £45.00
Rider Footrests ­ Pair
A pair of forged and CNC machined aluminium Rider Footrests that provide exceptional grip
(A9770142)
and accentuate the rugged appearance of your Triumph. Finished in anodised gunmetal
RRP £60.00
grey.
Comfort Rider Seat ­ Brown
A quilted rider seat with integral 3D Net inserts for optimum weight distribution to enhance
(A2304638)
your level of comfort. Featuring stitch detailing and embroidered Triumph branding. Also
RRP £205.00
available in black.
Comfort Dual Seat
Featuring integral 3D Net inserts for optimum weight distribution, the Comfort Dual seat is
(A2304076)
designed to improve your riding experience by enhancing your level of comfort. Finished in
RRP £205.00
premium dual fabrics with stitch detailing and an embroidered Triumph logo.
Passenger Footpegs ­ Sport
A set of alternative Passenger Footrests slimmer in profile to provide a sportier look and feel.
(A9778035)
Comes with a polished finish to match Thruxton R rider footrests.
RRP £45.00
Passenger Footrests
A set of forged and machined Passenger Footrests that provide exceptional grip whilst
(A9778041)
enhancing the rugged appearance of your Triumph. Finished in anodised gunmetal grey.
RRP £60.00
Handlebar Grips ­ Diamond Knurl ­ Grey ­
A set of moulded rubber grips in a diamond knurl design. Featuring the iconic Triumph logo
22mm
(A2041477)
in grey.
RRP £25.00
Handlebar Grips ­ Diamond Knurl ­ Black ­
A set of moulded rubber grips in a diamond knurl design. Featuring the iconic Triumph logo
22mm
in black.
(A2041476)
RRP £25.00
Comfort Rider Seat
(T2304363)
A quilted rider seat with integral 3D Net inserts for optimum weight distribution to enhance
your level of comfort. Featuring stitch detailing and embroidered Triumph branding. Also
RRP £205.00
available in brown.
Heated Grip Kit
A set of bespoke slimline heated grips that feature integrated dual temperature controls in
(A9638135)
the left­hand grip and display your chosen grip setting on the instrument's LCD. They can be
RRP £185.00
internally wired through your handlebars for a neat installation. The Heated Grip Kit comes
complete with all the mounting hardware and wiring you will need.
ELECTRICAL
Auxiliary Power Socket
An Auxiliary Power Socket that enables the following to be used: ­ Triumph Battery Optimiser ­
(A9828015)
Triumph Heated Clothing RRP £25.00
Optimate Adapter
An Optimate Adaptor that comes in handy when used in conjunction with the Triumph
(A9930415)
Auxiliary Power Socket (A9938048).
RRP £10.20
Front LED Indicator Kit ­ Medium Stem
A set of bullet­style Front LED Indicators featuring a turned aluminium bezel, gloss black
(A9838041)
body and clear LED lens. Available in a number of different lengths to fit your motorcycle. EU
RRP £60.00
homologated.
Front LED Indicator Kit ­ Short Stem
A set of bullet­style Front LED Indicators featuring a turned aluminium bezel, gloss black
(A9838023)
body and clear LED lens. Available in a number of different lengths to fit your motorcycle. EU
RRP £60.00
homologated.
Phone Holder Kit ­ 70x130mm
A convenient quick­release mobile phone holder that features a multi­adjustable bracket so it
(A9510325)
can be mounted on the yoke. The Phone Holder Kit comes complete with an anti­glare visor,
RRP £50.00
touch­screen compatible window and cable port. It has a splash­resistant design and
includes an additional rain cover. Designed to accommodate devices up to 70 by 130 mm.
Rear LED Indicator Kit ­ Short Stem
A set of bullet­style Rear LED Indicators featuring a turned aluminium bezel, gloss black
(A9838039)
body and clear LED lens. Available in a number of different lengths to fit your motorcycle. EU
RRP £60.00
homologated.
Clear Indicator Lens Kit
A complete injection­moulded lens and bulb kit that enables you to convert your amber
(A2709046)
RRP £25.00
lenses to clear.
Phone Holder Kit ­ 140x90mm
A convenient quick­release mobile phone holder that features a multi­adjustable bracket so it
(A9510323)
can be mounted on the yoke. The Phone Holder Kit comes complete with an anti­glare visor,
RRP £50.00
touch­screen compatible window and cable port. It has a splash­resistant design and
includes an additional rain cover. Designed to accommodate devices up to 140 by 90 mm.
Triumph Battery Optimiser
Automatic Battery Optimiser for lead acid batteries.
(A9930410)
RRP £55.00
UK Model
Phone Holder Kit ­ 160x100mm
A convenient quick­release mobile phone holder that features a multi­adjustable bracket so it
(A9510324)
can be mounted on the yoke. The Phone Holder Kit comes complete with an anti­glare visor,
RRP £50.00
touch­screen compatible window and cable port. It has a splash­resistant design and
includes an additional rain cover. Designed to accommodate devices up to 160 by 90 mm.
PERFORMANCE
Finned Header Rings ­ Vapour Blasted
Cast aluminium Finned Header Rings that enhance the authentic look of your Triumph.
(A9600753)
Vapour blasted finished.
RRP £60.00
Brushed Stainless Steel Slip­ons ­ EU
A pair of stainless steel brushed plated silencers manufactured by exhausts specialists
(A9600536)
Vance & Hines. Designed to be shorter and lighter than the original equipment exhaust.
RRP £610.00
Fixed dB killers. EU Homologated.
Black Ceramic Slip­ons ­ US
A pair of stainless steel silencers in a black ceramic coating manufactured by exhausts
(A9600506)
specialists Vance & Hines. Designed to be shorter and lighter than the original equipment
RRP £610.00
exhaust, and engineered to offer a larger tailpipe diameter. Removable dB killers. US
Homologated (EPA/CARB).
Finned Header Rings ­ Black
Cast aluminium Finned Header Rings that enhance the authentic look of your Triumph.
(A9600610)
Finished in black.
RRP £60.00
Black Ceramic Slip­ons ­ EU
A pair of stainless steel silencers in a black ceramic coating manufactured by exhausts
(A9600512)
specialists Vance & Hines. Designed to be shorter and lighter than the original equipment
RRP £665.00
exhaust. Fixed dB killers. EU Homologated.
Black Ceramic Exhaust Headers, Pair
A pair of stainless steel exhaust headers styled to complement your accessory silencer
(A9600650)
option. Black ceramic coating.
RRP £255.00
Brushed Stainless Steel Slip­ons ­ US
(A9600524)
A pair of stainless steel brushed silencers manufactured by exhausts specialists Vance &
Hines. Designed to be shorter and lighter than the original equipment exhaust. Removable
RRP £560.00
dB killers. US Homologated (EPA/CARB).
Knee Pads
A set of self­adhesive, durable rubber knee pads featuring the Triumph logo. The pads not
(A9798017)
RRP £55.00
only protect the side of the tank from rubbing, but also increase your comfort and grip.
CNC Machined Fork Protectors
A set of CNC Machined Fork Protectors that feature anodised aluminium spacers with laser­
(A9640107)
etched detailing and acetyl sliders. Designed to protect fork legs in the event of a fall.
PROTECTION
RRP £40.00
270mm U Lock
A high Quality, 270mm U lock for the ultimate bike security. Manufactured in the EU. SRA
(A9810023)
Approved/Sold Secure.
RRP £110.00
Alarm Kit ­ Thatcham Approved
A Thatcham approved (Category 2­1) bespoke alarm upgrade developed with Datatool. It is
(A9808119)
designed to be installed on the motorcycle whilst ensuring the integrity of the wiring harness.
RRP £300.00
The kit features resin filled water and vibration resistant construction.
Aluminium Chain Guard ­ Silver
A hard­wearing fabricated aluminium Chain Guard with a clear anodised finish. Also
(A2054007)
available in black anodised and anodised gunmetal grey.
RRP £70.00
Aluminium Chain Guard ­ Black
Styled aluminium Chain Guard with a black anodised finish. Also available in clear anodised
(A2054009)
RRP £70.00
and anodised gunmetal grey.
U Lock Kit ­ 320mm
High Quality, 320mm U lock for the ultimate bike security. Manufactured in the EU. SRA
(A9810024)
Approved/Sold Secure.
RRP £130.00
Aluminium Sump Plate ­ Clear Anodised
A brushed alloy Aluminium Sump Plate that not only adds to that heritage race feel but also
(A9708340)
protects your motorbike from stone chips. With a clear finish but also available in black
RRP £100.00
anodised.
U Lock Mounting Kit
A fabricated mounting bracket for stowing your Triumph U Lock when not in use.
(A9819005)
RRP £20.00
Engine Protector Kit
A set of hard­wearing glass filled Nylon Engine Covers that will protect the lower section of
(A9618149)
the engine in the event of a drop. They are engineered to comply with race regulations for
RRP £50.00
track use. Their subtle styling ensure they are as inconspicuous as possible.
Aluminium Sump Plate ­ Black Anodised
A brushed alloy Aluminium Sump Plate that not only adds to that heritage race feel but also
(A9708380)
protects your motorbike from stone chips. In a durable black anodised finish, but also
RRP £100.00
available in clear.
Aluminium Chain Guard ­ Gunmetal
A hard­wearing fabricated aluminium Chain Guard with a gunmetal grey anodised finish.
(A2054008)
Also available in black anodised and clear anodised.
RRP £70.00
Triumph Disc Lock
High quality, forged Disc Lock and carry pouch. Manufactured in the EU. SRA Approved/Sold
(A9810022)
RRP £80.00
Secure.
Brushed Clutch Badge
(A9610256)
A cast aluminium Clutch Badge with minimalistic Triumph branding to subtly enhance your
motorcycle's style. It can be attached to your Triumph in place of the original part. Brushed
RRP £35.00
finish, but other finishes and styles are available.
STYLING
Black Clutch Badge
A cast aluminium Clutch Badge with minimalistic Triumph branding to subtly enhance your
(A9610257)
motorcycle's style. It can be attached to your Triumph in place of the original part. Dark finish,
RRP £35.00
but other finishes and styles are available.
Café Racer Fairing
A four­piece injection moulded Café Racer Fairing that comes complete with a hard coated
(A9708412)
screen and fabricated aluminium subframe. Ideal for that classic authentic racer look.
RRP £665.00
Includes Clip­on Low Handlebar Kit.
Stealth Sprocket ­ 42T
This 2­piece replacement Sprocket is manufactured using the finest grade aluminium. It is
(A2018942)
designed to be 11% lighter than the original equipment part and is finished in black.
RRP £65.00
Dimensions: Ø125 PCD 42T 525
Clutch Cable Guide ­ Gunmetal
A CNC machined aluminium Clutch Cable Guide bracket designed to replace the original
(A9610302)
part. Featuring laser­etched Triumph logo branding and a gunmetal grey anodised finish.
RRP £30.00
Also available in black and clear.
Camshaft Cover Kit ­ Black
A hard­wearing Camshaft Cover Kit designed as an alternative to the original equipment part.
(A9618197)
Finished in powder coat black.
RRP £80.00
Valve Caps ­ Laser Etched Chrome
A pair of Chrome plated Valve Caps featuring laser­etched Triumph logo detailing in chrome.
(A2009006)
RRP £10.00
A resin logo option is also available.
Black Wheels
(A9648041)
A replacement wheel set that creates a more contemporary custom look for your motorcycle.
Finished in gloss black.
RRP £1,020.00
Available from September 2016
Dresser Bar ­ Graphite
A set of fabricated Dresser Bars that add to the classical style of your Triumph. Featuring a
(A9788023)
powder coated graphite grey finish, but also available in chrome and black.
RRP £115.00
Headbolt Covers ­ Silver
A set of four CNC machined Headbolt Covers featuring subtle Triumph branding. Finished in
(A9610277)
anodised clear, but also available in black and gunmetal grey.
RRP £35.00
Leather Tank Strap ­ Black
A genuine Leather Tank Strap with a brushed and drilled stainless steel band. Also available
(A9798010)
RRP £60.00
in brown
Bar End Mirror ­ Black Anodised
A Bar End Mirror kit featuring tinted mirror glass and laser­etched Triumph branding. This
(A9630205)
RRP £85.00
accessory is sold individually and can be fitted on either side of the handlebars. Black
anodised finish, but also available in clear anodised.
Clutch Cable Guide ­ Clear Anodised
(A9610303)
A CNC machined aluminium Clutch Cable Guide bracket designed to replace the original
part. Featuring laser­etched Triumph logo branding and a clear anodised finish. Also
RRP £30.00
available in black and gunmetal grey.
Dresser Bar ­ Black
A set of fabricated classically styled Dresser Bars finished in powder coat black.
(A9788022)
RRP £115.00
Cover Fasteners ­ Black
A replacement set of Cover Fasteners for use on both left and right­hand engine covers.
(A9618190)
Coated in black.
RRP £30.00
Chrome TPS Cover
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610247)
equipment part. It features a contemporary design with Triumph branding in a chrome finish.
RRP £35.00
Other finishes and styles also available.
Clear Fly Screen
A short scratch­resistant Clear Fly Screen that transmits 100% of the light. It requires the
(A9708303)
Flyscreen Mounting Kit to be fitted. Height: 188 mm Width: 245 mm
RRP £70.00
Bar End Mirror ­ Clear Anodised
A Bar End Mirror kit featuring tinted mirror glass and laser­etched Triumph branding. This
(A9630206)
accessory is sold individually and can be fitted on either side of the handlebars. Clear
RRP £85.00
anodised finish, but also available in black anodised.
Black ACG Badge
A cast aluminium ACG Badge with minimalistic Triumph branding to subtly enhance your
(A9610265)
RRP £25.00
motorcycle's style. It can be attached to your Triumph in place of the original part. Dark finish,
but other finishes and styles are available.
Engine Cover Kit ­ Chrome
A complete set of side Engine Covers designed to replace the original equipment item.
(A9618185)
RRP £280.00
Finished in high quality chrome, but also available in black and brushed.
Black Intake Cover
(A9618183)
An Intake Cover that serves as a direct replacement for the original equipment part. Featuring
a gloss black powder coat finish to achieve a stealthier look
RRP £35.00
Leather Tank Strap ­ Brown
A genuine Leather Tank Strap with a brushed and drilled stainless steel band. Also available
(A9798011)
in black
RRP £60.00
Engine Cover Kit ­ Black
A complete set of side Engine Covers designed to replace the original equipment item.
(A9618184)
Finished in textured black, but also available in brushed and chrome.
RRP £255.00
Brushed TPS Cover
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610248)
equipment part. It features a contemporary design with Triumph branding in a brushed finish.
RRP £35.00
Other finishes and styles also available.
Black ACG Badge ­ Ribbed
A cast aluminium ACG Badge that subtly enhances your motorcycle's style. It can be attached
(A9610261)
to your Triumph in place of the original part. Features Triumph branding on a glossy black
RRP £30.00
backing and a dark finish with ribbed detailing. Other finishes and styles are available.
Brushed ACG Badge ­ Ribbed
A cast aluminium ACG Badge that subtly enhances your motorcycle's style. It can be attached
(A9610260)
to your Triumph in place of the original part. Features Triumph branding on a glossy black
RRP £30.00
backing and a brushed finish with ribbed detailing. Other finishes and styles are available.
Rear Wheel Adjuster Kit ­ Black
A machined and anodised Rear Wheel Adjuster Kit to replace the original equipment part.
(A9648036)
Finished in black, but also available in grey.
RRP £25.00
Machined Oil Filler Cap ­ Clear Anodised
(A9610241)
A CNC machined aluminium Oil Filler Cap that features laser­etched branding with vertical
knurling to aid removal. Finished in anodised clear, but also available in black and gunmetal
RRP £15.00
grey.
Bar End Finishers­ Black
A pair of turned aluminium Bar End Finishers finished in black. Also available in alternative
(A9630437)
colours to complement your choice of Bar End Mirrors. Required to be fitted with an
RRP £25.00
Accessory Bar End Mirror.
Chrome TPS Cover ­ Ribbed
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610347)
RRP £40.00
equipment part. It features a classic, ribbed design with Triumph branding in a chrome
finish. Other finishes and styles also available.
Brushed TPS Cover ­ Ribbed
(A9610348)
A decorative cast aluminium Throttle Body Finisher designed to replace the original
equipment part. It features a classic, ribbed design with Triumph branding in a brushed
RRP £40.00
finish. Other finishes and styles also available.
Inspection Cover
(A9618194)
An Inspection Cover designed as a direct replacement for the original equipment part.
Featuring a ribbed design and finished in black.
RRP £10.00
Bar End Mirror Clear Anodised
A bar end mounted round mirror that can be mounted to either side of the handlebar. Sold
(A9638132)
individually. In a clear anodised finished.
RRP £70.00
Chrome ACG Badge
A cast aluminium ACG Badge with minimalistic Triumph branding to subtly enhance your
(A9610263)
RRP £25.00
motorcycle's style. It can be attached to your Triumph in place of the original part. Chromed
finish, but other finishes and styles are available.
Valve Caps ­ Bubble Badge Black
(A2009037)
A pair of Aluminium Valve Caps featuring a resin logo badge in black. A Laser­etched option
is also available.
RRP £10.00
Bar End Finishers ­ Red
(A9630439)
Turned aluminium Bar End Finishers offered in alternative colours to match accessory Bar
End Mirror Options. Sold as a pair. Required to be fitted with an Accessory Bar End Mirror.
RRP £25.00
Black TPS Cover ­ Ribbed
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610349)
equipment part. It features a classic, ribbed design with Triumph branding in a black finish.
RRP £40.00
Other finishes and styles also available.
Valve Caps ­ Bubble Badge Chrome
A pair of Brass Valve Caps featuring a resin logo badge in chrome. A Laser­etched option is
(A2009007)
RRP £10.00
also available.
Clutch Cable Guide ­ Black
(A9610301)
A CNC machined aluminium Clutch Cable Guide bracket designed to replace the original
part. Featuring laser­etched Triumph logo branding and a black anodised finish. Also
RRP £30.00
available in gunmetal grey and clear.
Dresser Bar ­ Chrome
(A9788015)
A set of fabricated Dresser Bars that add to the classical style of your Triumph. Featuring a
high gloss chrome finish, but also available in black and graphite grey.
RRP £130.00
CNC Machined Front Reservoir
A CNC Machined Front Brake Reservoir designed to replace the original equipment part.
(A9628041)
Featuring an ergonomic design with a knurled lid and integral sight glass. Laser­etched
POA
branding and an anodised black finish.
Chrome Clutch Badge ­ Ribbed
(A9610251)
A cast aluminium Clutch Badge that subtly enhances your motorcycle's style. It can be
attached to your Triumph in place of the original part. Features Triumph branding on a glossy
RRP £40.00
black backing and a chromed finish with ribbed detailing. Other finishes and styles are
available.
Machined Oil Filler Cap ­ Black Anodised
(A9610239)
A CNC machined aluminium Oil Filler Cap that features laser­etched branding with vertical
knurling to aid removal. Finished in anodised black, but also available in gunmetal grey and
RRP £15.00
clear.
Machined Oil Filler Cap ­ Gunmetal Anodised
(A9610240)
RRP £15.00
A CNC machined aluminium Oil Filler Cap that features laser­etched branding with vertical
knurling to aid removal. Finished in anodised gunmetal, but also available in black and clear.
Flyscreen Mounting Kit
A minimalist Mounting Kit to facilitate the fitment of accessory flyscreens blades.
(A9708131)
RRP £30.00
Headbolt Covers ­ Black
(A9610275)
RRP £35.00
A set of four CNC machined Headbolt Covers featuring subtle Triumph branding. Finished in
anodised black, but also available in gunmetal grey and clear.
Black TPS Cover
A decorative cast aluminium Throttle Body Finisher designed to replace the original
(A9610249)
RRP £35.00
equipment part. It features a contemporary design with Triumph branding in a black finish.
Other finishes and styles also available.
Rear Wheel Adjuster Kit ­ Grey
(A9648037)
RRP £25.00
A machined and anodised Rear Wheel Adjuster Kit to replace the original equipment part.
Finished in grey, but also available in black.
Black Clutch Badge ­ Ribbed
A cast aluminium Clutch Badge that subtly enhances your motorcycle's style. It can be
(A9610253)
RRP £40.00
attached to your Triumph in place of the original part. Features Triumph branding on a glossy
black backing and a dark finish with ribbed detailing. Other finishes and styles are available.
Dark Tinted Flyscreen
(A9708151)
RRP £70.00
A short scratch­resistant Dark Tinted flyscreen that transmits 25% of the light. It requires the
Flyscreen Mounting Kit to be fitted. Height: 188 mm Width: 245 mm
Camshaft Cover Kit ­ Chrome
(A9618150)
RRP £120.00
A Camshaft Cover Kit designed as an alternative to the original equipment part. Finished in
high gloss chrome.
Bar End Finishers ­ Clear Anodised
(A9630438)
RRP £25.00
A pair of turned aluminium Bar End Finishers with a clear anodised finish. Also available in
alternative colours to complement your choice of Bar End Mirrors. Required to be fitted with
an Accessory Bar End Mirror.
Brushed ACG Badge
(A9610264)
A cast aluminium ACG Badge with minimalistic Triumph branding to subtly enhance your
motorcycle's style. It can be attached to your Triumph in place of the original part. Brushed
RRP £25.00
finish, but other finishes and styles are available.
Valve Caps ­ Laser Etched Black
(A2009036)
A pair of Aluminium Valve Caps featuring laser­etched Triumph logo detailing in black. A
resin logo option is also available.
RRP £10.00
Black Headlight Bezel
A Headlight Bezel designed as a direct replacement for the original equipment. Finished in
(A9838240)
RRP £40.00
black. Complete the look by combining it with the Black Headlight Bowl.
Clear Touring Screen
(A9708408)
RRP £70.00
A scratch­resistant Clear Longhaul Screen that provides increased wind protection. It
transmits 100% of the light. Requires Flyscreen Mounting Kit to be fitted. Height: 249 mm
Width: 262 mm
Bar End Finishers ­ Grey
A pair of turned aluminium Bar End Finishers finished in grey. Also available in alternative
(A9630440)
RRP £25.00
colours to complement your choice of Bar End Mirrors. Required to be fitted with an
Accessory Bar End Mirror.
Chrome Clutch Badge
(A9610255)
A cast aluminium Clutch Badge with minimalistic Triumph branding to subtly enhance your
motorcycle's style. It can be attached to your Triumph in place of the original part. Chromed
RRP £35.00
finish, but other finishes and styles are available.
Sprocket Cover ­ Chrome
A high quality chrome Sprocket Cover designed to replace the standard equipment on
(A9618195)
Thruxton models.
RRP £85.00
Headbolt Covers ­ Gunmetal
A set of four CNC machined Headbolt Covers featuring subtle Triumph branding. Finished in
(A9610276)
RRP £35.00
anodised gunmetal grey, but also available in clear and black.
Chrome ACG Badge ­ Ribbed
(A9610259)
A cast aluminium ACG Badge that subtly enhances your motorcycle's style. It can be attached
to your Triumph in place of the original part. Features Triumph branding on a glossy black
RRP £30.00
backing and a chromed finish with ribbed detailing. Other finishes and styles are available.
Fender Removal Kit
(A9708352)
A Fender Removal Kit designed to radically alter the rear end of the bike. It comes complete
with a forged aluminium mount, license plate mount, compact LED tail and number plate
RRP £155.00
lights. EU Homologated.
Short Tinted Flyscreen
A short light Tinted Flyscreen that transmits 75% of the light. It requires the Flyscreen
(A9708407)
RRP £70.00
Mounting Kit to be fitted. Height: 188 mm Width: 245 mm
Paddock Stand Bobbins ­ Black
(A9640048)
A set of turned aluminium Paddock Stand Bobbins finished in anodised black.
RRP £15.00
Colour­coordinated Flyscreen
(A9708381)
A short flyscreen that provides an additional styling feature to your bike. Colour co­ordinated.
Requires Flyscreen Mounting Kit to be fitted. Height: 188 mm Width: 245 mm
RRP £114.00
Brushed Clutch Badge ­ Ribbed
(A9610252)
RRP £40.00
A cast aluminium Clutch Badge that subtly enhances your motorcycle's style. It can be
attached to your Triumph in place of the original part. Features Triumph branding on a glossy
black backing and a brushed finish with ribbed detailing. Other finishes and styles are
available.
Tall Tinted Flyscreen
(A9708409)
A tall light Tinted Flyscreen that provides increased wind protection. It transmits 75% of the
light. Height: 249 mm Width: 262 mm
RRP £70.00
2016 THRUXTON RANGE
CLOTHING
Our desire to get the most out of every
ride applies as much to our clothing as it
does to our bikes. Every piece of Triumph
clothing is designed to play a part with
technical innovations in materials and
design, focusing on style, safety and
comfort. Designed and tested by people
that ride to deliver a perfect fit.
FOR THE RIDE
We want to bring you even more of what's
going on in the fast­moving riding world
before it happens, so we’ve had a change
of gear. Our new For the Ride blog will be
home to regular updates capturing the
excitement, thrills and fascinating
characters that make motorcycling our
reason for getting up each day. It’s a
lifestyle thing, so we’ll also be turning the
spotlight on some of the people making
the riding world the exhilarating place it is.
fortheride.com
www.triumph.co.uk © 2013­2015 Triumph Motorcycles Terms and Conditions apply.