Christmas Ornaments - Priscilla`s Crochet

Transcription

C HAPTER 1
Christmas
Ornaments
C HRISTMAS O RNAMENTS S ECTION 1
Chenille Bear Christmas
Ornament
For a "baby's first Christmas" ornament, add the baby's
name and year on an alphabet bead garland for the bear to
hold!
C HENILLE B EAR C HRISTMAS O RNAMENT Materials:
About 1/2 ounce Lion Brand Chenille Sensations brown or tan for teddy bear or white for polar bear (limp worsted weight yarn can be substituted)
Crochet hook size E (or D if you crochet loosely)
Yarn needle
Small amount of fiberfill
2 small black beads
1’ of 1/4” ribbon
Black embroidery floss
12” fishing line
Designed by Priscilla Hewitt
Copyright © 2000 Priscilla’s Crochet
Finished size: About 4” high
To work sc dec (over 2 sts): Insert hook in first indicated
stitch and pull up a loop, insert hook in next indicated st and
pull up a loop; yo and pull through all 3 remaining loops on
hook.
Body 2
Ch 4, join with a sl st to the first ch to form a ring. Head Round 1: Work 6 sc in the ring; do not join rounds...instead
use a marker to mark the first stitch of each round. (6 sc) Rounds 1-4: Work the same as rounds 1-4 of the body. (24 sc
at the end of round 4) Round 2: Work 2 sc in each sc around. (12 sc) Rounds 5-7: Sc in each sc around. (24 sc) Round 3: (Sc in the next sc, 2 sc in the next sc) 6 times. (18
sc) Round 8: Work as round 11 of the body. (18 sc) Round 9: Work as round 13 of the body. (12 sc) Round 4: (Sc in each of the next 2 sc, 2 sc in the next sc) 6
times. (24 sc)
Round 5: Working in the back loop only, sc in each sc
around. (24 sc)
Round 10: (Sc dec over the next 2 stitches) 6 times. (6 sc)
Fasten off. Stuff head with fiberfill and sew to body with body
yarn tail.
Rounds 6-10: Sc in each sc around. (24 sc) Muzzle Round 11: (Sc in each of the next 2 sc, sc dec over the next 2
sc) 6 times. (18 sc) Round 1: Work the same as round 1 of the body. (6 sc) Round 12: Sc in each sc around. (18 sc) Rounds 2-3: Sc in each sc around. (6 sc) Fasten off, leaving a
12” yarn tail for sewing. Sew muzzle around round 3 to the
lower “face” side of the head.
Round 13: (Sc in the next dc, sc dec over the next 2 sc) 6
times. (12 sc) Round 14: Sc in each sc around. (12 sc) Fasten off, leaving a
12-15” yarn tail for sewing. Stuff body with fiberfill.
Ears (make 2) Ch 2.
Row 1: Work 4 sc in the 2nd ch from hook; ch 1, turn. (4 sc) 3
Row 2: Sc in each sc across. (4 sc) Fasten off, leaving a 12”
yarn tail for sewing. Sew each ear to the head as in the photo.
angle for mouth. Tie ribbon around neck with a bow in the
front. Sew a loop of fishing line to the top of the head to hang.
Arms (make 2) Rounds 1-2: Work as for rounds 1-2 of the body. (12 sc at the
end of round 2)
Happy Crocheting!
Rounds 3-7: Sc in each sc around. (12 sc) Fasten off, leaving
a 12’ yarn tail for sewing. Stuff arm. Sew arm to body around
round 7 with yarn tail.
Legs (make 2) Rounds 1-3: Work as for rounds 1-3 of the body. (18 sc at the
end of round 3)
Round 4: Working in the back loop only, sc in each of the
next 6 sc, (sc dec over the next 2 sc) 3 times to form the “toes”,
sc in each of the last 6 sc. (15 sts)
Rounds 5-8: Sc in each sc around. (15 sc) Fasten off, leaving
a 12” yarn tail for sewing. Stuff leg with fiberfill. Sew to body
around round 8 with the yarn tail (“toes” pointing upward.) Finishing
Sew beads to either side of the upper muzzle for eyes. With
black floss, embroider a small inverted triangle on the upper
muzzle for nose, then embroider an inverted “Y” below the tri-
4
Christmas Wreath
Materials:
Dark green crochet cotton thread size 10
2" ring
Red or burgundy 1/4" ribbon
Steel crochet hook size 10
Size: about 3"
Round 1: Work 81 sc around ring. Join with a sl st to first sc.
(81 sc)
Round 2: Ch 1, sc in same st as joining; (ch 4, skip next sc, sc
in next sc) 39 times; ch 1, dc in first sc to form last loop. (40
loops)
C HRISTMAS W REATH
(Ornament, Fridgie or Napkin Ring) Designed by Priscilla Hewitt
Round 3: Ch 1, sc in last loop (around dc); *ch 1, skip next
loop [trc, ch 3, sc in the top of the last trc for picot (4 times),
trc, ch 1] in next loop; skip next loop; sc in next loop* Repeat
from * to * 8 times; ch 1, skip next loop (trc, ch 3, sc in the top
of the last trc for picot) 4 times, trc, ch 1, join with a sl st to
first sc. (10 shells) Finish off.
Finishing: Weave ribbon through round 2, going over and
under 2 stitches at a time. Add a small bow.
5
To make an ornament: Add a loop of ribbon for hanging.
To make a magnet: Glue a magnet to the back.
My favorite: Use as is for a napkin ring.
Happy Crocheting!
6
Crocheter’s Christmas
Ornament
Materials:
One ounce worsted weight Christmas yarn
Crochet hook size D
1 1/2” styrofoam ball
Tacky glue
Straight pins
Ribbon
Wind yarn around the styrofoam ball until completely covered. (It should resemble a ball of yarn.) Secure with a straight
pin. Measure an additional 3 yards of yarn from the spot
where the yarn is pinned to the ball. Cut yarn.
Attach end of the cut yarn to the hook; ch 9.
Row 1: Sc in the 2nd ch from hook and in each ch remaining
across; ch 1, turn. (8 sc)
C ROCHETER ’ S C HRISTMAS O RNAMENT
Rows 2-4: Sc in each sc across; ch 1, turn. (8 sc)
Row 5: Sc in each sc across. Remove hook from last st. Insert
hook through yarn- covered styrofoam ball, then pick up the
last stitch on row 5. Wind any excess yarn around ball and secure with a straight pin. Pull stitch tightly around hook and
7
glue in place. Randomly insert a few straight pins through the
yarn-covered styrofoam ball to secure yarn to ball. Glue hook
in place on the ball. Allow glue to dry. Tie ribbon bow around
hook. Thread yarn needle with fishing line. Insert needle
through the styrofoam ball and pull through fishing line. Tie
fishing line to form a hanging loop. Glue bow in place.
Happy Crocheting!
8
N-Hook Christmas Ball
Covers
Materials:
Small amount of any of the following yarns:
Lion Brand Chenille Thick & Quick
Lion Brand Terryspun
Lion Brand Wool Ease Thick & Quick
Crochet hook size N (9.00 mm)
2 1/4” ball ornament
Round 1: Ch 2, work 6 sc in the 2nd ch from hook. (6 sc) Do
not join rounds.
Round 2: Work 2 sc in each sc around. (12 sc)
Round 3: (Sc in the next sc, 2 sc in the next sc) 6 times. (18
sc) Rounds 4-7: Sc in each sc around. (18 sc) N-H OOK C HRISTMAS B ALL C OVERS
Round 8: Insert ball in cover, (sc in the next sc, skip 2 sc) 6
times. Fasten off. Weave in ends. Decorate balls with ribbon,
flowers, pearls, etc., as desired.
9
Happy Crocheting!
10
Picot Snowflake Ornament
Materials:
Small amount of size 10 crochet cotton thread (Knit CroSheen)
Fabric stiffener
Small ziplock bag
Stainless steel straight pins or wooden toothpicks
Waxed paper
Sheet of flat styrofoam
Fishing line
P ICOT S NOWFLAKE O RNAMENT Pattern note: There should be an unworked ch between
each picot.
To make dc picot: Ch 5, dc in the 4th ch from hook. To make cluster picot: Ch 5, yo insert hook in the 4th ch
from hook and pull up a loop, yo and pull through 2 loops on
hook, yo, insert hook in same ch and pull up a loop, yo and
pull through 2 loops on hook, yo and pull through all 3 remaining loops on hook, sl st in the same ch.
Work tightly for best results. If you tend to crochet loosely,
use a smaller size hook.
11
Ch 6; join with a sl st to the first ch to form ring.
Round 1: Ch 3 to count as the first dc, work 11 more dc in the
ring; join with a sl st to the top of the beginning ch 3. (12 dc) Round 2: Ch 1, sc in the same st as joining, (2 dc, ch 3, 2 dc)
in the next dc, *sc in the next dc, (2 dc, ch 3, 2 dc) in the next
dc* Repeat from * to * 4 times; join with a sl st to the first sc.
(6 "points")
from bag and wring out any excess stiffener. Shape snowflake
on waxed paper and tack in place with pins or toothpicks. Allow to dry completely. Remove pins. Add a loop of fishing line
to the snowflake to hang.
Happy Crocheting!
Round 3: Ch 1, sc in the same st as joining, (dc picot, cluster
picot, dc picot), ch 1, sl st in the same sc, ch 1, 2 dc in the next
ch-3 sp, work 2 dc picots, work 3 cluster picots, working along
the other side, skip 3 cluster picots, sl st in the next unworked
ch, (ch 4, dc in the 4th ch from hook, skip next dc picot, sl st
in the next unworked ch) 2 times, 2 dc in the same ch-3 sp, ch
1, skip next 2 dc, *sc in the next sc, (dc picot, cluster picot, dc
picot), ch 1, sl st in the same sc, ch 1, 2 dc in the next ch-3 sp,
work 2 dc picots, work 3 cluster picots, working along the
other side, skip 3 cluster picots, sl st in the next unworked ch,
(ch 4, dc in the 3rd ch from hook, skip next dc picot, sl st in
the next unworked ch) 2 times, 2 dc in the same ch-3 sp, ch 1,
skip next 2 dc* Repeat from * to * 4 times; join with a sl st to
the first sc. Fasten off. Weave in ends.
Finishing: Place snowflake and fabric stiffener in a small
plastic zip lock bag. Work stiffener into the snowflake through
the closed bag, then let soak at least one hour. Place a sheet of
waxed paper on a flat sheet of styrofoam. Remove snowflake
12
Stuffed Gingerbread Man
This gingerbread man can be used as an ornament or
fridgie, or add a few to a wreath! I'm sewing several together at the hands to make a garland for my kitchen window. You can also make a larger one for a stuffed toy by using a larger hook.
Materials:
Limp worsted weight or sport weight yarn
About 1 ounce brown; small amount of white
Crochet hook size D
Fiber fill
Buttons, beads, etc. for trim
S TUFFED G INGERBREAD M AN
Finished size: About 5 1/2" tall
To work sc dec (over 2 sts): Insert hook into the first indicated st and pull up a loop, insert hook into the next indicated
st and pull up a loop; yo and pull through all 3 remaining
loops on hook.
Pattern note: Cut a 12” length of brown yarn before beginning each piece. This will be used for the second arm.
Make 2 of these pieces. 13
Head With brown, ch 4.
Pattern note: Before beginning row 11, attach the 12”
length of yarn with a sl st to the first sc on row 10; ch 7. Fasten
off 12” length of yarn.
Row 1: 2 sc in the 2nd ch from hook, sc in the next ch, 2 sc in
the last ch; ch 1, turn. (5 sc) Row 2: 2 sc in the first sc, sc in each of the next 3 sc, 2 sc in
the last sc; ch 1, turn. (7 sc)
Row 11: 2 sc in the 2nd ch from hook, sc in each of the next 6
ch’s, sc in each of the next 5 sc on the head, sc in each of the
next 6 ch’s on the attached length of yarn, 2 sc in the last ch;
ch 1, turn. (21 sc)
Row 3: 2 sc in the first sc, sc in each of the next 5 sc, 2 sc in
Row 15: Sc dec over the first 2 sc, sc in each of the next 19 sc,
sc dec over the last 2 sc; ch 1, turn. (21 sc)
Row 7: Sc dec over the first 2 sc, sc in each of the next 7 sc, sc
dec over the last 2 sc; ch 1, turn. (9 sts)
sc dec over the last 2 sc. Fasten off. Turn. (19 sc)
Body Row 8: Sc dec over the first 2 sc, sc in each of the next 5 sc, sc
Row 17: Skip the first 4 sc. Join yarn with a sc to the next sc,
sc in each of the next 10 sc; ch 1, turn, leaving remaining
stitches unworked. (11 sc)
Row 9: Sc dec over the first 2 sc, sc in each of the next 3 sc, sc
Row 18: sc in each sc across; ch 1, turn. (11 sc)
Row 10: Sc in each sc across; ch 8, turn. (5 sc)
Arms
14
2 sc in the last sc; ch 1, turn. (7 sc)
First Leg Finishing Row 23: Sc in each of the first 7 sc, leaving the remaining
stitches unworked; ch 1, turn. (7 sc)
Round 1: Place one piece on the other piece, matching arms
and legs. With brown, sc both pieces together around the outside, leaving an opening for stuffing. Stuff, then sc the opening closed. Fasten off brown.
Rows 26-29: Work as for rows 26-29 of the first leg.
Row 25: 2 sc in the first sc, sc in each of the next 4 sc, sc dec
over the 1st 2 sc; ch 1, turn. (7 sc)
Round 2: Join white with a sl st to the front loop only of any
sc on round 1, ch 1, (sl st in the front loop only of the next sc,
ch 1) around; join with a sl st to the first sl st. Fasten off. Decorate as desired with buttons, beads, etc.
sc dec over the last 2 sc; ch 1, turn. (5 sc)
Happy Crocheting!
Row 29: Sc dec over the first 2 sc, sc in the next sc, sc dec
over he last 2 sc. Fasten off. (3 sc)
Second Leg Row 23: Skip the next unworked sc on row 22, attach yarn
with a sc to the next unworked sc on row 22, sc in each of the
remaining 6 sc; ch 1, turn. (7 sc)
15
Stuffed-Star Photo
Ornament
Variation...to make stuffed star ornament without photo, just
make 2 back pieces; join and stuff.
Materials:
Small amount of worsted weight yarn (acrylic or cotton)
Crochet hook size D
2” lucite ring
Wallet-size photo
Glue
Fiber fill
Gauge: Rounds 1-2 of the back piece = about 2”
Finished size: About 4 1/2” from point to point
Preparation S TUFFED -S TAR P HOTO O RNAMENT Designed by Priscilla Hewitt
Center 2” ring over the photo so that it looks the way you want
it when framed. Trace around the outside of the 2” ring onto
the centered photo, then cut the photo along the traced circle.
Laminate photo, it desired.
Back Ch 5; join with a sl st to the first ch to form a ring.
16
Finishing Round 1: Ch 3 to count as the first dc, work 14 more dc in the
ring; join with a sl st to the top of the beginning ch 3. (15 dc) Glue the photo to the back of the crochet-covered ring of the
front piece, making sure the top of the photo aligns with one
of the points of the star, so the photo will be straight when
hung. Allow glue to dry. With wrong sides together, match the
points of the stars of the front and back pieces. Join yarn with
a sl st through any matching stitch of both pieces; (ch 1, sl st
in the next st) three-quarters of the way around, working (ch
1, sl st) twice in the center trc of the each point of the star.
Stuff with fiberfill, pushing the fiberfill into the corners of the
star. Continue crocheting closed. Fasten off. Join yarn with a
sl st in the ch-1 sp at the top point of the star; ch 10, sl st in the
same ch-1 sp for hanging loop. Fasten off. Weave in ends.
Round 2: Ch 3 to count as the first dc, dc in the same st as
joining, work 2 dc in each remaining dc around; join with a sl
st to the top of the beginning ch 3. (30 dc)
Round 3: Ch 1, sc in the same st as joining, hdc in the next st,
dc in the next st, 3 trc in the next st, dc in the next st, hdc in
the next st, (sc in the next st, hdc in the next st, dc in the next
st, 3 trc in the next st, dc in the next st, hdc in the next st) 4
times; join with a sl st in the first sc. (40 sts)
Round 4: (Sc in the next hdc, hdc in the next dc, dc in the
next trc, 5 trc in the next trc, dc in the next trc, hdc in the next
dc, sc in the next hdc, skip the next sc) 5 times; join with a sl
st in the first sc. (55 sts) Fasten off .
Happy Crocheting!
Front Round 1: Work 30 sc around the 2” ring; join with a sl st to
the first sc. (30 sc)
Round 2: Work the same as round 3 of piece A. (40 sts)
Round 3: Work the same as round 4 of piece A. (55 sts) Fasten off. Weave in ends.
17
Victorian Christmas Ball
Materials:
Ecru size 10 crochet thread Crochet hook size 9
2 5/8” clear glass ball ornament
1/4” satin ribbon
Ribbon roses, pearl strings (or anything you’d like to decorate)
Ball Cover Ch 10, join with a sl st to form ring.
Round 1: Ch 1, (sc, ch 5) in ring 9 times; sc in ring, ch 2, dc in
the first sc to join. (10 loops)
V ICTORIAN C HRISTMAS B ALL
Round 2: Ch 5, sc in the loop formed by the last dc, (ch 5, sc
in the next loop, ch 5, sc in the same loop) 9 times; ch 2, dc in
the dc to join. (20 loops)
Round 3: (Ch 5, sc in the next loop) 19 times; ch 2, dc in the
dc to join. (20 loops)
Rounds 4-7: Repeat round 3.
18
range the ruffle of the ball cover. Hot glue bows, roses, or
other decorations to the top of the ball.
Round 12: (Ch 7, sc in the next loop) 19 times; ch 3, trc in the
Happy Crocheting!
Round 13: (Ch 7, sc in the next loop) 19 times; ch 3, trc in the
trc to join. (20 loops)
Round 14: Repeat round 13.
trc to join. (20 loops)
Round 26: Ch 4 to count as the first dc and the first ch 1, (dc,
ch 1) 2 times in the same loop; (dc, ch 1) 5 times in each loop
around; (dc, ch 1) 2 times in the first loop; join with a sl st to
the 3rd ch of the beginning ch 4. (100 dc)
Round 27: Sl st into the first ch 1 sp, ch 1, sc in the same sp,
(ch 3, sc in the next ch 1 sp) around, ending with ch 3, join
with a sl st to the first sc. fasten off. Weave in ends.
Finishing Weave ribbon through round 22. Insert the glass ball, then
draw the ribbon closed around the “neck” of the ball and tie
tightly. Tie a loop of ribbon to the hanging loop of the ball. ar19
Victorian Rose Wreath
Ornament
Materials:
Size 10 ecru crochet thread
5 yds. 1/8” green satin ribbon
Bunch of 12 tiny ribbon roses
Wood curtain pole ring that fits a 7/8” diameter pole
About a yard of 1/4” gold ribbon or strung pearls
Crochet hook size E
Hot glue gun and glue stick
Pole ring
Round 1: With the green ribbon and size E hook, work 35 sc
around the pole ring, starting at the left of the eye hook and
working around; join with a sl st in front of the eye hook to the
first sc; fasten off, weave in ends. (35 sc)
V ICTORIAN R OSE W REATH O RNAMENT
Round 2: Using size 6 hook, join crochet thread with a sl st
to the first sc, ch 1, sc in the same st, ch 3, sc in the same st,
(ch 3, sc in the next sc, ch 3, sc in the same st) around; ch 3,
join with a sl st to the first sc. (70 ch 3 loops)
Round 3: Sl st into the first ch 3 loop, ch 4 to count as the
first dc and the first ch 1, (dc, ch 1) 4 more times in same loop;
20
(dc, ch 1) 5 times in each remaining ch 3 loop around; join
with a sl st to the 3rd ch of the beginning ch 4. (210 dc)
Round 4: Sl st into the first ch 1 sp, ch 1, sc in the same sp,
(ch 1, sc in the next ch 1 sp) around; ch 1, join with a sl st to
the first sc. Fasten off. Weave in ends. (210 ch 3 loops) Finishing: Cut roses from stem, being careful not to untwist
rose. Glue roses evenly around wreath, leaving a 1/2” space
for the bow in front of the eye hook. Weave the gold ribbon or
pearls serpentine-style through the roses, tacking with glue
as needed. Tie a small bow with the gold ribbon or pearls and
glue to the open space in front of the eye hook. Tie a length of
the gold ribbon or pearls to the eye hook to hang.
Happy Crocheting!
21
Yarn Christmas Ball Cover
Materials:
Small amount of any of the following yarns: worsted weight
“soft” yarn, sport weight yarn, Speed CroSheen or Luster
Sheen
Crochet hook size E
2 1/4” clear glass ball ornament
Decorations as desired
Ch 6, join with a sl st to form ring.
Round 1: Ch 1, sc in ring; (ch 5, sc in ring) 9 times; ch 2, join
with a dc to the first sc to form the last loop. (10 loops)
Y ARN C HRISTMAS B ALL C OVER Rounds 2-10: (Ch 4, sc in the next loop) 9 times; ch 2, dc in
the dc to form the last loop. (10 loops)
Round 11: (Ruffle) Ch 6, sc in the 3rd ch from hook, (trc, ch
3, sc in the top of the trc for picot) 2 times in the same loop;
*(trc, ch 3, sc in the top of the trc for picot) 5 times in the next
loop.* Repeat from * to * 8 times; (trc, ch 3, sc in the top of
the trc for picot) 2 times in the first loop; join with a sl st to
the 4th ch of the beginning ch 6. Fasten off. Weave in ends.
Finishing: Cut a 12” piece of yarn; weave in and out of round
22
10 loosely. Insert glass ball; pull yarn tightly around the
“neck” of the ball; knot securely and trim yarn. Arrange ruffle;
decorate as desired.
Happy Crocheting!
23

Christmas Ornaments - Priscilla`s Crochet

Transcription

Similar documents

Cotton Dappled Shells Throw

PiCniC BasKet DishCloth

FLAT PACK GRAPPLING HOOK

Baby Waves Blanket MATERIALS

lovely linen stitch cowl - Gaspereau Valley Fibres

alvida - Classic Elite Yarns

MEASUREMENTS PATONS GEMBROOK 100g BALLS NEEDLES

Kippah with Center Star - Women`s League for Conservative Judaism

Neck Scarf - mygrandmatime