Hi Performance Crate Engines From GM

Transcription

Hi Performance Crate Engines From GM Performance Parts
350/290HP Base Engine
Different Levels of Engine Assemblies
Classic Industries offers three distinct levels of GM Crate Engines, covering the
gamut from long blocks to complete turn-key engines. This variety gives classic
car builders the opportunity to customize an engine as much or as little as they need
to, to meet their expectations. For additional engine choices and more information
about GM Performance engines, visit us online at http://www.classicindustries.com!
Base/Base+ Engines
The base engine assembly
typically includes, block,
crank, pistons, cam, heads and
valve covers, but allows the
builder to pick the carburetor/
injection system and intake
manifold they desire. Base+
engines include an intake
manifold, and on select
models, a distributor also.
Deluxe Engines
The deluxe crate engines
are essentially ready to
fire up, as they ship with
the distributor installed,
harmonic balancer bolted
on and the carburetor in the
crate. All you need to do is
put the parts together and go!
K
Engines & Components
Turn-Key Engines
We told our engineers
to have some fun and
assemble engines the
way they think it should
be done … we then
took their combinations,
built them up and put
them in a crate that ships
right to your dealer. The
turn-key engines represent an
outstanding value, and they are
perfect for enthusiasts who have
built a chassis and need reliable power to get it down the road.
Warranty Information
GM Performance Parts Crate Engines feature a 24-month or 50,000-mile limited
warranty. GM Components include a 12-month or 12,000-mile limited warranty.
GM Performance Parts Racing Crate Engines are excluded from limited warranty.
GM Parts Engines offer a 36-month or 100,000-mile limited warranty when the
engine is installed in a recommended application.
Important: Designed for pre-1979 street vehicles or any off-road vehicle. Not intended for marine applications.
Some applications may affect engine warranty. Some applications may not be emission legal; check state and local
ordinances. GM Performance Parts does not utilize any used or remanufactured parts in this crate engine.
408
GMPP Crate Engines
The best value
crate engine
in the GM
Performance
Parts lineup!
The 350/290
is an answer
to those car
crafters who demand maximum
return on their money. However, just
because it’s affordable, don’t think
that it’s a stone. The 350/290 delivers
290 hp @ 5100 rpm and a solid 326
lb.-ft. of torque at 3750 rpm.
G13014
Specifications:
Engine Type: Chevrolet small block V8
Displacement: 350 cubic inch
Bore x Stroke: 4.00" x 3.48"
G3509
Camshaft Specs:
Lift: .450" int/.460" exh
Duration: 222° int/222° exh @ .050"
Valve Size: 1.94" intake/1.50" exhaust
Compression Ratio: 8.5:1
Rocker Arm Ratio: 1.5:1
Recommended Fuel: 87 octane
Timing: Base 10° BTDC, 32° Total
Maximum Recommended RPM: 5100
Balanced: Internal
Installation Notes
• Use internally balanced flexplate P/N G9289 for
automatic transmission or flywheel P/N G7138 for
manual transmission (not included).
• Power ratings based on Holley 670-cfm carburetor
(not included).
• Does not accept GM Performance Parts roller
lifter assemblies.
• Recommended use in vehicles 6000lb GVW or less.
Note: Special order, prepaid only. Shipped
truck freight. No further discounts apply.
G13013 ........................ 2274.99 ea
ZZ383/425HP Base Engine
Big block power
from a small
block engine!
For the
ultimate GM
Performance
Parts small
block crate
engine, choose
the ZZ383, a combination of Fast
Burn aluminum performance heads
and a 383 stroker small block that
adds up to 425 horsepower and 449
lb.-ft. of torque. The ZZ383 has a
specially machined engine block
and 3.80"-stroke crankshaft, which
produce 383 cubic inches of pure
performance.
Specifications:
Engine Type: Chevy small block V8
Camshaft Specs:
Balanced: External
Installation Notes
• Comes with 12.75" automatic transmission
flexplate. Requires 1986-99 350 style externally
balanced flywheel for manual transmission
G13022 ........................ 6119.99 ea
G13015
350 HO/330HP Engine
The 350 HO is based on a tough,
Chevy four-bolt block. The high-lift
camshaft is based on the 1965-67
Corvette 327 engines, but it has even
more lift and duration. The Turn-Key
engine is complete from top to bottom,
with the intake manifold, carburetor,
water pump, and distributor. You get
everything you need for a complete,
running engine right out of the crate.
We even ship it with an accessory drive
package, fuel pump, starter, and spark
plug wires. One level down is the 350
HO Deluxe which comes only with the
intake, carburetor, water pump, and
distributor. Finally, the base model gives
you all of the same internal components
as the Deluxe and Turn-Key including
chrome valve covers and timing
cover, but it comes without the intake
manifold, carburetor, water pump,
balancer, distributor, and dampener.
Specifications:
Camshaft Specs:
Lift: .435" intake/.460" exhaust
Duration: 212° int / 222° exh @.050"
Maximum Recommended PRM: 5500
Balanced: External
Installation Notes
• Counterweighted flexplate for auto transmission.
• Change to externally balanced flywheel for manual
transmission applications.
• Right-side oil dipstick.
G13014 Turn-Key ........ 5409.99 ea
G3509 Deluxe ............ 4349.99 ea
G13015 Base Engine .... 3259.99 ea
Toll Free Order Line 800.854.1280
Hi Performance Crate Engines From
GMl EEngine
Performance
Parts
RRam Jet
J 350 DDeluxe
i
24-month/50,000-mile limited warranty.
G13201
5.3L E-Rod Engine
G13016
G7166
ZZ4 350/355HP Engine
An aluminum-headed 350 that makes
355 horsepower and 405 lb.-ft. of
torque! The ZZ4 350 Turn-Key crate
engine is one of the most popular
high performance crate engines ever
produced. The ZZ4’s Corvette-derived
high-performance heads feature high
velocity intake runners and D-shaped
exhaust ports to promote efficient
and unobstructed flow through the
engine—providing strong power and
torque at all rpm levels. The Base
ZZ4 350 engine is delivered with an
aluminum dual-plane intake manifold,
HEI distributor, cast iron water pump,
dampener, and flexplate. Our Turn-Key
ZZ4 350 crate engine also ships with
all the parts you need to get it running.
That includes an accessory drive
package, fuel pump, chrome air cleaner
kit, Holley 770-cfm carburetor, starter,
and spark plug wires. With its high
level of performance and durability,
it could very well be the perfect crate
engine. Your choice of base engine or
Turn-Key engine.
Specifications:
Engine Type: Chevrolet small block V8
Camshaft Specs:
Installation Notes
• Comes with 12.75" externally balanced automatic
transmission flexplate.
• Change to externally balanced flywheel for manual
transmission applications.
• Requires fuel line from fuel pump to carburetor.
• Fuel pump pressure is pre-set, fuel pressure
regulator not required.
• Some assembly and engine tuning may be
required.
Specifications:
Engine Type: LS-series Gen IV small
block V8
Displacement: 327 (5.3L)
Bore x Stroke: 3.780"x 3.620" (96 x 92 mm)
G13201 automatic ........ 6959.99 ea
G13202 manual ............ 6959.99 ea
6.2L LS3 E-Rod Engine
Based on the Corvette's 430 HP 6.2L
all-aluminum LS3 engine. All engines
include the necessary engine controller
with specific calibrations for MT or
AT configurations. Other components
supplied include: Engine wiring
harness, Exhaust manifolds, catalytic
converters, O2 sensors/sensor bosses,
Accelerator pedal (for LS3 electronic
throttle), air filter and instruction
manual. In addition each engine requires
a front accessory drive/transmission
control system suited to your build.
For more detailed information about
E-Rod engines, visit our website.
Specifications:
Engine Type: LS-Series Gen IV Small
block V8
Displacement: 376 cubic inch (6.2L)
Camshaft Specs:
Balanced: Internal
G13016 Turn-Key ........ 5779.99 ea
G13293 Base engine .... 6242.99 ea
G13203 automatic ........ 8719.99 ea
G13204 manual ............ 8719.99 ea
G3434
Specifications:
Camshaft Specs:
Balanced: External
Installation Notes
• Comes with ext balanced, manual trans flywheel.
• Change to ext balanced flexplate for auto trans.
Camshaft Specs:
Balanced: Internal
24-month/50,000-mile limited warranty.
G3508
........................ 6389.99 ea
454 HO Base+ Engine
Musclecar power at
a low-buck
price! We
started with
a brand
new Gen VI
four-bolt big
block, and cast
iron cylinder heads deliver a pumpgas friendly 8.75:1 compression
ratio. Horsepower comes in at 425
with 500 lb.-ft. of big-block torque.
The 454 HO is delivered to you
complete with water pump, balancer,
intake manifold, and 14" automatic
transmission flexplate.
Specifications:
Engine Type: Chevy big block V8
Camshaft Specs:
Balanced: External
Installation Notes
• Clutch linkage boss is cast into block, but must be
drilled and tapped.
• When using cast iron exhaust manifolds, lower
head bolts may need to be replaced with bolts with
shorter heads for clearance.
• Comes with a 14" automatic transmission flexplate;
use flywheel P/N 14096987 and 11" clutch assembly
for manual transmission.
G3433
ZZ502/502HP Engine
One horse per cube has long been
a mark of great engines. Today, the
standard is met in the ZZ502, an engine
that is not just bigger, but better than
the competition. The base engine is a
convenient partial engine assembly.
You get the big block V8, four-bolt
main muscle and just enough of the
“finish work” to take the headache out of
choosing parts—without missing out on
the fun stuff! For those of you who want
your ZZ502/502 already assembled,
the ZZ502/502 Deluxe crate engine
includes the entire engine, from carb
to oil pan, and comes assembled from
the factory. It includes a Holley 870cfm four barrel carburetor, dual-plane
intake manifold CNC-port matched to
the oval-port heads, starter, distributor,
plug wires, and water pump. The
ZZ502/502 Deluxe crate engine offers
you a GM Performance Parts tested and
validated 502 horsepower/567 lb.-ft. of
torque. The ZZ502/502 comes with our
aluminum oval-port, big-valve street
heads that flow enough air to satisfy
the demands of the hungry 4.47" bores
and 4.00" stroke crankshaft.
Specifications:
Camshaft Specs:
Duration: 224° int/234° exht @ .050"
Balanced: External
Installation Notes
• Clutch linkage boss is cast into block, but must be
drilled and tapped.
• When using cast iron exhaust manifolds, lower
head bolts may need to be replaced with bolts with
shorter heads for clearance.
• Requires electric fuel pump because the Gen VI
block has no mechanical pump boss.
• Comes with a 14" auto transmission flexplate.
G7167
........................ 6359.99 ea
G3434
G3433
Deluxe ............ 9689.99 ea
Base engine .... 8399.99 ea
GMPP Crate Engines
409
Engines & Components K
Duration: 208° int/221° exh @.050"
Compression Ratio: 10:1
Balanced: External
The E-Rod 5.3L is rated at 315 HP
and 335lb/ft TQ. All engines include
the necessary engine controller with
specific calibrations for automatic
or manual transmissions. Other
components include: Engine Wiring
Harness, Exhaust Manifolds, Catalytic
Converters, O2 sensors/sensor bosses,
fuel tank evaporative emissions
canister, mass air flow sensor and sensor
boss, Accelerator pedal (for use with
GMPP electronic throttle), air filter
and instruction manual. In addition
each engine requires a front accessory
drive/transmission control system
suited to your build. For more detailed
information about E-Rod engines, visit
our website.
Evoking the
nostalgic
look of the
early fuel
injection
systems,
but
instead of
a mechanical
injection system, the
Ram Jet 350 is fed by a state-of-theart, electronically controlled port fuel
injection system. The engine comes
with the necessary wiring harness and
detailed installation instructions.
Remanufactured Engines
All of ATK’s manufacturing facilities have achieved both QS9000 and ISO 9001 certification levels, one of the few engine
remanufacturers in the world to have done so. In addition, ATK’s
parent company VEGE Motoren has also achieved ISO 9001
certification. This is particularly significant as it represents both
an engineering and a manufacturing certification.
There are over 150 processes involved in remanufacturing an ATK
engine. Featured procedures include:
Engine blocks magnafluxed, bored, precision-honed and mains line-honed
Camshaft bearings line-bored for accurate center-to-center clearance
Engine blocks and cylinder heads precision surfaced.
Cylinder heads magnafluxed and machined for three-angle valve seats
Crankshafts stress-relieved, precision ground and micro-polished
Camshafts precision ground or replaced with new
Each engine tested (most hot-run tested) for compression, oil pressure, oil
leaks, engine noise and general operating condition before shipment.
ATK Remanufactured Engine Warranty Information:
K
At Classic Industries®, we know that supplying a great product is only part of
the job. The staff at ATK is made up of dedicated professionals whose
only job is to support you, the Classic Industries® customer. From the
moment you call on ATK, whether to request technical assistance, or
inquire about their warranty, they are dedicated to providing solutions
and support. That’s the ATK promise. Classic Industries® and ATK
have always been leaders in innovation, offering products, warranties
and programs that have redefined the industry. That leadership is
evident in our products and our support. ATK warrants to the original
purchaser that each engine sold by Classic Industries® shall be free of
defects in material and workmanship under normal use and with periodical
maintenance as set forth by the original manufacturer subject to the following terms and conditions.
Definitions:
Engine: As used in this warranty refers to the remanufactured assembly (basic block, cylinder head and internal components)
as supplied by ATK.
Term: Standard Warranty: This warranty shall exist for 3 years and Unlimited miles. Warranty term begins on date of installation.
The Standard Warranty applies to all ATK products with the following exceptions:
Diesel Engines carry a warranty term of 12 months or 12,000 miles whichever occurs first.
Trucks Over 11,000 GVW (Gross Vehicle Weight) carry a warranty term of 12 months or 12,000 miles whichever occurs first.
Motorhomes: Class A or Motorhomes over 11,000 GVW are NOT COVERED by the ATK warranty. ATK expressly does not
offer engines for these applications. Please be aware that only engines designed expressly for large motorhomes should ever be
used in such an application. ATK does not catalog nor prepare engines for these applications and therefore takes no responsibility
when an ATK engine is used in this manner.
Product Replaced Under Warranty:
Product replaced under warranty carries the remainder product’s warranty term.
Standards:
Subject to the limitations listed herein. ATK, at its option, shall repair or replace a product within the warranty term after
determination by ATK that the product is defective. All products are to be returned to ATK for inspection. Products not returned
to ATK will not be warranted. All repairs and/or replacements covered by this warranty must be authorized by ATK. Unauthorized
repairs will not be paid.
Limitations:
This warranty applies to products originally supplied by ATK. This warranty does not apply to or include any of the following:
A. Damage as a result of OVERHEATING, LACK OF LUBRICATION or CONTAMINATION.
B. Damage resulting from PRE-IGNITION or DETONATION. This includes but is not limited to: melted or broken pistons,
broken piston rings, damaged cylinder heads, leaking head gaskets, etc. For more information regarding pre-ignition and detonation
please contact our Customer Service Department.
C. Repair or replacement required as a result of any accident or misuse.
D. Repair or replacement of any accessory or service item, including specifically but not limited to: all components of the cooling,
fuel, electrical and ignition systems in addition to all belts, hoses, and filters.
E. Any product used for competition racing or related purposes.
F. Any product to which a device or accessory not conforming to original manufacturer’s specifications has been installed.
G. Any product on which periodic maintenance services required by the original manufacturer have not been performed.
Limited Liability:
ATK’s liability under this warranty is limited solely to the repair or replacement of defective product. ATK shall not be liable
for any incidental, special, consequential or exemplary damages, including but not limited to rental cars, towing fees or for any
service not expressly provided for herein, relating to or arising from the ATK product.
Limited Warranty:
This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, or fitness
for a particular purpose, on the part of ATK or the dealer installing the engine. No dealer nor any agent or employee thereof, is
authorized to extend or modify this warranty.
Labor Payments:
ATK authorized repairs will be compensated at a rate not to exceed 100% of the applicable flat rate schedule as published by
Chilton, Mitchell or Motors Repair Manuals. Hourly rates for all authorized labor claims will be paid in accordance with the
original installation rate, not to exceed $42.00 per flat rate hour. Do-it-yourself repairs, and repairs performed by unlicensed repair
facilities, will be paid at a rate not to exceed $15.00 per flat rate hour.
Additional Owner/User Obligations:
Initial Startup: Valves must be readjusted to manufacturer’s specifications. Due to various component designs, cylinder head
re-torque may or may not be required in your particular application. Refer to factory shop manual for the proper procedure for
your engine type. If for any reason you are unsure what action to take please contact our Customer Service Department via our
Toll Free telephone number.
First Service Between 600-1000 Miles After Installation: Oil and oil filter must be changed, valves readjusted and cylinder
heads re-torqued (refer to initial startup instructions). Failure to perform these basic operations may result in a voided warranty.
410
ATK Remanufactured Engines
Introducing
ATK’s No Fault Gold Warranty Program.
An added protection program that covers car rental, towing, an increased labor
rate and fluids on all approved claims.
The No Fault Gold Warranty Program Includes:
Rental Car up to $150!
Rental car expense reimbursed for 5 days/ $30 per day up to $150
Towing Up to $100!
Towing reimbursed on approved claims up to $100 per occurrence.
Increased Labor Rate Up to $95 per hour
Increase labor rates to cover approved repairs up to $95 per hour
Fluids Up to $25!
Cost of fluids is reimbursed on approved claims up to $25
ATK now offers the No Fault Gold Warranty Program for you to purchase in
addition to the Industry Leading standard ATK warranty already included with our
remanufactured engines. This added protection policy covers expenses not included
in ATK’s standard warranty. Coverage is based on hourly rates established by
Chilton, Motor and Mitchell manuals.
ATK No Fault Gold Warranty Program is an additional $225.00
Rental Towing Max. Hourly Labor Rate
NO Fault
Gold Warranty Program
YES
YES
Up to $95
Standard ATK Warranty NO
NO
Up to $50
How
does the core charge work?
Upon ordering, you will be charged the retail price of the engine plus the core charge.
When your engine arrives, you will save the crating that it is shipped in, so that you
can use it to package your core. Once the core is ready to ship, you will call ATK
for core pickup. ATK will then inspect the core to make sure it meets the following
criteria. Providing the core meets all of the criteria, you will be refunded the core price.
Core Policy:
All fluids must be drained prior to core return.
Cores must be complete and in rebuildable condition.
Core returned must be identical to the engine purchased in size and application.
ATK reserves the right to refuse any core that has been modified or altered.
Note: Core prices can fluctuate according to supply, demand and availability. If you plan to
return a core for credit, please confirm the core price with your salesperson prior to ordering.
No further discounts apply.
Classic Industries® & ATK Team Up To Bring You
The Best Remanufactured Engine In The Industry!
ATK is dedicated to continual improvement in the processes
and procedures for every engine that they manufacture. This
insures our ability to offer the very latest products and the highest
quality remanufactured units in the industry. Their manufacturing
techniques have been perfected to the point where they now
offer us increased capacity, thus resulting in lower pricing on
many applications. With an industry leading warranty, ATK is
Part # Years C.I.D./L
82-84
85-86
87
88-89
90-92
93-95
77-81
76-79
76-79
78-85
78-85
86
86
86
87-88
87-88
87-94
87-95
87-95
87-95
87-95
73-77
78-80
78-80
78-80
78-80
78-85
78-85
86
86
87-95
87-95
89-92
93-94
94-95
95
96
96-97
73-76
75-79
75-79
76-79
1977-79
1977-79
All
V.I.N Code
without valve covers, timing cover and oil pan unless otherwise noted. Shipped anywhere in
the Continental United States for $50.00. Note: No further discounts apply.
Description
173 2.8 V6 1
block #068, 889, 818, carbureted only
173 2.8 V6 S
block #061, FI only
173 2.8 V6 S
block #457, 695, crank #817, FI
173 2.8 V6 S
block #457, 695, crank #526, 481, FI
191 3.1 V6 T
FI, cast iron heads, block #457, 695, crank #981, for use w/distributor type ignition, passenger side starter
207 3.4 V6 S
block #608, cast iron heads #884, crank #981, with crank & cam sensor
301 4.9 V8 Y
no smog, non turbo
305 5.0 V8 G,H,Q,U
driver side dipstick, 7 exhaust manifold bolts on both heads
305 5.0 V8 G,H,Q,U
same as DC04 (above) except with valve covers, timing cover and oil pan
305 5.0 V8 G,H,F,S
passenger side dipstick, 7 exhaust manifold bolts on both heads
305 5.0 V8 G,H,F,S
305 5.0 V8 F,G,H
carb or FI, block #551, head #416, 301, 601, full circle rear main seal
305 5.0 V8 F,G,H
305 5.0 V8 F,G,H
FI, non-roller, block #766, valve cover bolts around edge of cover
305 5.0 V8 G,H
carb, non-roller, block #627, 058, head #081, 187, center valve cover bolts
305 5.0 V8 G,H
same as DCB3 (above) except with valve covers, timing cover and oil pan
305 5.0 V8 F
TPI, FI, HO roller cam, block #627, 058, head # 081, 187, center valve cover bolts
305 5.0 V8 E
EFI, roller cam, block #627, 058, head #081, 187, center valve cover bolts
305 5.0 V8 E
305 5.0 V8 H
FI, non-roller, block #627, 058, head #081, 187, center valve cover bolts
305 5.0 V8 H
same as DCA9 (above) except with valve covers, timing cover and oil pan
350 5.7 V8
smog holes head, specify head # 2-3/4" crank centering ring, splash shield to #2 & #4 main
350 5.7 V8 H,J,K,L,X,4,8 2 bolt main, driver side dipstick, 7 exhaust manifold bolts on passenger side head
350 5.7 V8 H,J,K,L,X,4,8 same as DC13 (above) except with valve covers, timing cover and oil pan
350 5.7 V8 H,J,K,L,X,4,8 4 bolt main, driver side dipstick, 7 exhaust manifold bolts on passenger side head
350 5.7 V8 H,J,K,L,X,4,8 same as DC15 (above) except with valve covers, timing cover and oil pan
350 5.7 V8 L,M,P,6,8
2 bolt main, passenger side dipstick, 7 exhaust manifold bolts on passenger side head
350 5.7 V8 L,M,P,6,8
350 5.7 V8 K,L,M,6,8
2 bolt main, non-roller, block #548
350 5.7 V8 K,L,M,6,8
350 5.7 V8 7
EFI, 2 bolt main, roller cam, block #638, 548, 148, center valve cover bolts, will not fit 1993 & up LT-1
350 5.7 V8 7
same as DCA3 (above) except with valve covers, timing cover and oil pan
350 5.7 V8 8
TPI, HO, roller cam, 2 bolt main, block #148, 548, 638, head #083, 217, will not fit aluminum head Corvette
350 5.7 V8 P
SFI, Gen II, LT-1, roller cam, aluminum heads, block #327, head #649, for 1993-94 Firebird
350 5.7 V8 P
FI, LT-1, roller cam, cast iron heads, block #327, head #320
350 5.7 V8 P
SFI, Gen II, LT-1, HO, roller cam, aluminum heads, block #327, head #374, for 1995 Firebird
350 5.7 V8 P
LT-1, roller, cast iron heads, block #327, head #290
350 5.7 V8 P
FI, LT-1, roller cam, aluminum head, block #327, head #649, for 1996-98 Firebird
400 6.6 V8 R,S,Z
no smog, block #988, 557. head #4x, 6x, 5c, 2-3/4" crank centering ring
400 6.6 V8 R,S,Z
smog, specify head #, 2-1/2" crank centering ring, 5 motor mount on left 4 on right side
400 6.6 V8 R S,Z
no smog, specify head #, 2-1/2" crank centering ring, 5 motor mount on left 4 on right
400 6.6 V8 R,S,Z
smog, block #557, 934, head #4x, 6x, 5c, 2-1/2" crank centering ring
403 6.6 V8 K
AT, without smog holes in each head over the exhaust ports, block casting numbers 5572654B and 5544990
403 6.6 V8 K
AT, with smog holes in each head over the exhaust ports, block casting numbers 5572654B and 5544990
No Fault Gold Warranty Program added protection program additional to the ATK 3 Year/Unlimited Milage Standard Warranty
+ Core
Price
260
260
260
260
285
285
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
310
385
385
410
410
385
385
310
310
310
310
410
510
310
510
310
510
310
310
310
310
285
285
1709.99 ea
1709.99 ea
1709.99 ea
1709.99 ea
1889.99 ea
2034.99 ea
2174.99 ea
1524.99 ea
1629.99 ea
1524.99 ea
1614.99 ea
1659.99 ea
1759.99 ea
1709.99 ea
1709.99 ea
1814.99 ea
1864.99 ea
1759.99 ea
1864.99 ea
1709.99 ea
1814.99 ea
2359.99 ea
1689.99 ea
1794.99 ea
1713.99 ea
1819.99 ea
1709.99 ea
1814.99 ea
1809.99 ea
1914.99 ea
1824.99 ea
1924.99 ea
2014.99 ea
2634.99 ea
2434.99 ea
2684.99 ea
2434.99 ea
2634.99 ea
2244.99 ea
2244.99 ea
2444.99 ea
2244.99 ea
2164.99 ea
2164.99 ea
225.00 ea
ATK Remanufactured Engines
411
DC38
DC088
DCAl
DCA7
DCB7
DCC9
DP06
DC04
VC04
DC05
VC05
DC095
VC95
DCA5
DCB3
VCB3
DCM7
DC036
VC36
DCA9
VCA9
DP28
DC013
VC13
DC15
VC15
DC011
VC11
DC096
VC96
DCA3
VCA3
DCN7
DCM3
DCF8
DCR9
DCT1
DCT2
DP11
DP10
DP12
DP67
DO02
DO12
NFWG
now our top engine supplier. We are dedicated to distributing
the highest quality engines in the market. We’re also dedicated
to setting the industry standard in customer service. We believe
that once you’ve experienced the quality of ATK products, you’ll
agree there is no better engine source than ATK from Classic
Industries®. Call today for complete details. Important: All engines come
Hi Performance Crate Engines from ATK
ATK has been building engines for over 75 years and has assembled a line of dyno-proven crate
engine packages to power up your car. Classic Industries’ dedication to bringing the highest quality
products on the market, combined with ATK’s industry-leading warranty make these Chevy ATK
crate engines an obvious choice. Available in various configurations including a complete, ready-torun package for those who want to bolt their engine into their GM muscle car and hit the road. For the
ultimate in Chevy crate engines, there's no better source than ATK from Classic Industries®.
Important: Not for use in pollution controlled vehicles. Computer controlled vehicles may need updated chips or other modifications
Note: Special order, prepaid only. Not eligible for No Fault Gold Warranty Program. No further discounts apply.
Features a 24-Month/Unlimited-Mile Warranty!
Three Stages of
Performance!
From Tried-and-True . . .
Stage 1:
The ATK Stage 1 package is the basic
building block of performance. Each
Stage 1 motor comes with oil pump,
oil pan, timing cover, and valve covers
installed. Choose your own intake, fuel
system, and ignition components.
Stage 2:
Stage 1 Performance Engines
350/292HP TBI
383/320HP TBI Stroker
383/379HP Vortec Stroker
The 350 ci TBI engine produces 292
hp and 373 lbs of torque in a late
style hydraulic roller block. Includes
oil pump, black painted oil pan and
chrome timing cover and valve covers
installed. Just add your own fuel and
ignition components.
Specifications
HP: 292
Torque: 373
Displacement: 350 ci
Block: 4 bolt main
Crankshaft: OE 1 piece seal
Bore/Stroke: up to 4.030 x 3.480
Rods: powder metal
Pistons: hypereutectic
Rings: moly
Camshaft Type: HYD roller
Camshaft Lift: .435 in x .462 ex
Duration @ .50: 198 in x 210 ex
Cylinder Heads: OE cast iron TBI
Chamber Size: 67 cc
Valve Size: 1.94 in x 1.50 ex
Intake Runner Volume: OE
Rocker Arms: 1.5:1 stamped steel
Ign. Timing: 36 degrees total advance
Max RPM: 5800
HP31
350/292HP..... 2499.99 ea
This 383 ci
TBI stroker
engine
produces 320
hp and 395 lbs
of torque with
an upgraded
hydraulic roller
cam. Includes
oil pump, black painted oil pan
and chrome timing cover and valve
covers installed. Just add your own
fuel and ignition components.
Specifications
HP: 320
Torque: 395
Block: 4 bolt main
Crankshaft: nodular steel 1 piece seal
Bore/Stroke: 4.030 x 3.750
Rods: 4340 I-beam
Rings: moly
Cylinder Heads: OE cast iron TBI
Chamber Size: 67 cc
Max RPM: 5800
HP05
383/320HP..... 3499.99 ea
This 383 ci Vortec stroker performance
engine produces 379 hp and 461 lbs of
torque when used with a performance
carburetor and manifold combination.
Includes oil pump, black painted oil
pan and chrome timing cover and valve
covers installed. Just add your own fuel
and ignition components.
Specifications
HP: 379
Torque: 461
Block: 4 bolt main/roller
Crankshaft: Scat nodular steel 1 piece seal
Rods: Scat 4340 I-beam
Rings: moly
Cylinder Heads: OE cast iron Vortec
Chamber Size: 64 cc
Max RPM: 5800
HP33
383/379HP..... 3799.99 ea
350/351HP
Vortec
The ATK Stage 2 package builds
on the basics of the Stage 1, adding
the distributor, a performance intake
manifold, water pump, flexplate, and
harmonic balancer. Add the carburetor
and spark plugs and ignition wires of
your choice.
K
. . . To Tire-Melting!
Stage 3:
The ATK Stage 3 package is high
performance in a crate, with oil pan and
pump, spark plugs and wires, timing and
valve covers, distributor, performance
intake manifold, carburetor, fuel pump,
water pump, flaxplate, and balancer all
pre-installed.
412
ATK Engines
The 350ci
Vortec engine
produces 351
hp and 400 lbs
of torque when
used with a performance carburetor
and manifold combination. Includes
oil pump, black painted oil pan
and chrome timing cover and valve
covers installed. Just add your own
fuel and ignition components.
Important: Not intended for EFI.
Specifications
HP: 351
Torque: 400
Rods: powder metal
Rings: moly
Cylinder Heads: OE cast iron Vortec
Chamber Size: 64 cc
Max RPM: 5800
HP32
350/351HP..... 2599.99 ea
350/375HP w/Alum. Heads
Produces 375 hp and 415 lbs of torque
with the help of Pro-Filer aluminum
heads and a hydraulic roller cam lifter
combo. Includes oil pump, black
painted oil pan and chrome timing cover
and valve covers installed. Just add
your own fuel and ignition components.
Specifications
HP: 375
Torque: 415
Rods: powder metal
Rings: moly
Cylinder Heads: Pro-Filer aluminum
Chamber Size: 64 cc
Intake Runner Volume: 195 cc
Rocker Arms: 1.6:1 steel
Max RPM: 5800
HP89
350/375HP..... 3249.99 ea
454/415HP Big Block
The 454 ci
performance
engine
produces
415 hp and
497 lbs of
torque for your
hot rod. Includes
oil pump, black
painted oil pan and chrome timing
cover and valve covers installed.
Just add your own fuel and ignition
components.
Specifications
HP: 415
Torque: 497
Block: 2 bolt early style
Rods: OE
Rings: moly
Camshaft Type: HYD flat tappet
Cylinder Heads: OE cast
Chamber Size: 118 cc
Max RPM: 5800
HP40
454/415HP..... 3290.99 ea
Hi Performance Crate Engines from ATK
Stage 3
350/408HP w/Alum. Heads
383/429HP Alum. Head Stroker
454/500HP Big Block
383/480HP Stroker
This 350 ci
engine produces
408 hp and 414
lbs of torque on
pump gas with
the help of an
Edelbrock Performer
intake manifold and
aluminum heads. Includes
an oil pan, valve covers, timing
cover, distributor, intake manifold,
water pump, flexplate, and balancer
installed.
Specifications
HP: 408
Torque: 414
Rings: moly
Heads: Edelbrock aluminum
Chamber Size: 70 cc
Rocker Arms: 1.6:1 roller tip
Max RPM: 5800
HP34M 350/408HP..... 4799.99 ea
This 383 ci stroker
engine produces
429 hp and 459
lbs of torque
on pump gas
with the help
of an Edelbrock
Performer manifold
aluminum heads.
Includes an oil pan, valve covers,
timing cover, distributor, intake
manifold, water pump, flexplate, and
balancer installed.
Specifications
HP: 429
Torque: 459
Pistons: KB forged
Rings: moly
Heads: Edelrock RPM aluminum
Chamber Size: 70 cc
Max RPM: 5800
HP36M 383/429HP..... 4799.99 ea
This 454 ci
engine with
performance
aluminum heads
produces 500
hp and 545 lbs
of torque on pump
gas. Includes an
oil pan, valve covers,
timing cover, distributor,
performance intake manifold,
installed.
Specifications
HP: 500
Torque: 545
Crankshaft: OE
Rods: OE
Rings: moly
Camshaft Type: HYD flat tappet
Cylinder Heads: oval port aluminum
Rocker Arms: 1.7:1 full roller
Ignition Timing: 36 degrees total advance
Max RPM: 5800
HP45M 454/500HP..... 5599.99 ea
This 383 ci street/
strip stroker engine
with 480+ hp and
470+ lbs of torque
in a ready-to-run
pump gas package.
Includes oil pan, timing
cover, valve covers,
distributor with spark
plugs and wires, a performance intake
manifold, performance carburetor,
fuel pump, water pump, flexplate, and
balancer all pre-installed.
Specifications
HP: 480+
Torque: 470+
Crankshaft: Scat 4340 forged
Rods: Scat 4340 H-beam
Pistons: forged
Rings: moly
Camshaft Lift: custom
Duration @ .50: custom
Cylinder Heads: Pro-Filer aluminum
Chamber Size: 64 cc
Induction: carbureted
Max RPM: 5800
HP55C 383/480HP..... 7199.99 ea
Supercharged 350/500HP
489/565HP Stroker
496/600HP Stroker
This ATK monster Stage
Three 540 ci Dart
Big "M" engine
produces over 600
hp and 600 lbs of
torque in a dynotested and tuned
package. All Stage Three motors are
dyno proven, built from top quality
parts and come with oil pan, timing
cover, valve covers, distributor with
spark plugs and wires, a performance
intake manifold, performance
carburetor, fuel pump, water pump,
flexplate, and balancer all-pre installed.
Specifications
HP: 600+
Torque: 600+
Engine Type: Dart Big "M" Block V8
Block: Dart 9.8" deck height
Crankshaft: Scat 4340 forged steel
Rods: Scat H-beam
Pistons: forged
Rings: moly
Heads: Dart Pro Series 1
Max RPM: 5800
HP42C 540/600HP... 11,599.99 ea
This 350ci
supercharged
engine produces
500+ hp and 494
lbs of torque in
a ready-to-run
package. Includes
oil pan, timing
cover, valve covers,
distributor with spark plugs and
wires, a performance intake manifold,
performance carburetor, fuel pump,
water pump, flex plate, and balancer
all pre-installed.
Specifications
HP: 500+
Torque: 494
Crankshaft: 4340 forged steel
Rods: H-beam
Pistons: forged
Rings: moly
Cylinder Heads: aluminum
Chamber Size: 70 cc
Induction: Weiand 177 supercharger/carb
Max RPM: 5800
HP38C 350/500HP..... 9099.99 ea
This 489 ci
stroker big
block offers
565 hp and 595
lbs of torque
in ready-torun package.
Includes oil pan,
timing cover,
valve covers, distributor with spark
plugs and wires, a performance intake
manifold, performance carburetor,
fuel pump, water pump, flexplate,
and balancer all pre-installed.
Specifications
HP: 565
Torque: 595
Crankshaft: Scat nodular steel
Pistons: forged
Rings: moly
Heads: Edelbrock aluminum oval port
Max RPM: 5800
HP41C 489/565HP..... 7899.99 ea
This 496 ci
street/strip
stroker engine
produces 600
hp and 605
lbs of torque.
Includes oil pan,
timing cover,
valve covers,
distributor with spark plugs and
wires, a performance intake manifold,
performance carburetor, fuel pump,
all pre-installed.
Specifications
HP: 600
Torque: 605
Crankshaft: 4340 forged steel
Rods: 4340 H-beam
Pistons: forged
Rings: moly
Heads: aluminum "R" port
Max RPM: 5800
HP63C 496/600HP..... 9599.99 ea
Each Engine Features a 24-Month/Unlimited-Mile Warranty!
ATK Engines
413
540/600HP Dart Big Block
Performance Products
Elite Autoscanner Pro
1993-02 JET Performance Modules
JET Performance modules offer the most horsepower
available for your car when using a donor engine and
computer system from a crate engine! Add up to 23
horsepower instantly with simple, plug-in installation!
Only JET Performance programming provides
exclusive, full range dynamic spectrum tuning of
the air/fuel ratio, ignition advance, transmission and
various other parameters. Each program is track and
dyno tested to ensure the most possible horsepower and
drivability from each application. 50 state smog legal!
1999-02 LS1 Performance Programmer
K
Stage 1
Is for stock or mildly modified vehicles. Fuel and
timing curves are modified for optimal performance
and mileage using less expensive, lower octane fuels.
Programming is designed to burn fuel at peak efficiency,
which results in improved performance and mileage.
Daily drivers can use lower cost regular fuel for
potential mileage gains, but for optimal performance
gains use of mid-grade or better is recommended.
5.7L - LT1
JT19314
1993
AT ..................... 154.99 ea
JT19315
1993
MT .................... 154.99 ea
JT19414
1994
AT ..................... 244.99 ea
JT19415
1994
MT .................... 244.99 ea
JT19514
1995
AT ..................... 244.99 ea
JT19515
1995
MT .................... 244.99 ea
JT19614
1996
AT ..................... 244.99 ea
JT19615
1996
MT .................... 244.99 ea
JT19714
1997
AT ..................... 244.99 ea
JT19715
1997
MT .................... 244.99 ea
5.7L - LS1
JT19814
1998
AT ..................... 244.99 ea
JT19815
1998
MT .................... 244.99 ea
JT19914
1999
AT ..................... 244.99 ea
JT19915
1999
MT .................... 244.99 ea
JT10014
2000
AT ..................... 244.99 ea
JT10015
2000-02 MT .................... 244.99 ea
JT10114
2001-02 AT ..................... 244.99 ea
Stage 2
Is designed for the performance enthusiast, the Stage
2 features more aggressive programming to make the
most horsepower and torque available. Fuel and timing
curves are extensively modified for peak performance
and drivability. Requires use of 91 octane fuel, 180
degree thermostat and free flow exhaust. Also works
well with aftermarket intake systems, mass air sensors,
TBI spacers, etc.
5.7L - LT1
JT19314S 1993
AT ..................... 159.99 ea
JT19315S 1993
MT .................... 159.99 ea
JT19414S 1994
AT ..................... 249.99 ea
JT19415S 1994
MT .................... 249.99 ea
JT19514S 1995
AT ..................... 249.99 ea
JT19515S 1995
MT .................... 249.99 ea
JT19614S 1996
AT ..................... 249.99 ea
JT19615S 1996
MT .................... 249.99 ea
JT19714S 1997
AT ..................... 249.99 ea
JT19715S 1997
MT .................... 249.99 ea
5.7L - LS1
JT19814S 1998
AT ..................... 249.99 ea
JT19815S 1998
MT .................... 249.99 ea
JT19914S 1999
AT ..................... 249.99 ea
JT19915S 1999
MT .................... 249.99 ea
JT10014S 2000
AT ..................... 249.99 ea
JT10015S 2000-02 MT .................... 249.99 ea
JT10114S 2001-02 AT ..................... 249.99 ea
414
The JET Performance Programmer lets you take
control and program your own vehicle computer just
the way you like it. Modify air and fuel ratios, ignition
timing, shift points, shift firmness, speed limiter, and
rev limiter settings. Exclusive JET Tri-Power tuning
technology lets you tune for economy using lower cost
regular fuel, or tune for performance using midgrade
or premium fuels. All three modes are designed to
operate the engine at peak efficiency to maximize
horsepower and mileage for the given octane level.
The programmer will also correct your speedometer
and turn off the ABS system trouble light if you change
tire size or gear ratios, modify the temperature that
the cooling fan turns on and bypasses the skip shift
mechanism on manual transmissions. A built in scan
tool reads and clears diagnostic codes when your
check engine light comes on, saving you a trip to the
dealer. The programmer simply plugs into the vehicle’s
diagnostic port under the dash and allows you to make
your changes by answering simple yes or no questions.
Take the next step in performance tuning with the JET
Performance Programmer!
JT15029 1999-02 AT or MT ............ 339.99 ea
This battery powered OBD I
and OBD II enhanced scan tool
features a large, backlit LCD and
offers hobbyists and technicians
the ability to read and erase
generic and manufacturerspecific DTCs (Diagnostic
Trouble Codes), display
and reset MIL (Malfunction
Indicator Lamp) status, record &
playback live sensor data, read
and display I/M (Inspection/
Maintenance) monitors and
more! Read domestic enhanced
codes, graph engine data, record
stored vehicle information, and
connect to a PC to print data and
download updates. CAN compliant and compatible
with ALL 1996 and newer OBD II compliant
vehicles as well as certain pre-1996 GM, Ford and
Chrysler vehicles.
Note: No further discounts apply.
AC9190
.............................................. 334.99 ea
OBD II / ABS AutoScanner
w/Code Connect
This OBD II scanner not
only displays the diagnostic
trouble codes, but also offers
the most probable solutions
for your specific vehicle
when troubleshooting details
are available thanks to the
CodeConnect database of 3
million verified fixes. Read and
erase DTCs (Diagnostic Trouble
Codes), display and reset MIL
(Malfunction Indicator Lamp)
status, read, record & playback
live sensor data, read and display I/M (Inspection/
Maintenance) monitors. Other features include an
OBD II emissions check and drive cycle mode, ABS
code read/erase capability for most 1996 and newer
GM, Ford, and Chrysler vehicles, a large, backlit
LCD, a USB port for updates, and the capability of
printing data via PC. Compatible with OBD II and
CAN vehicles 1996 and newer.
Note: Troubleshooting data in English only.
AC9580 ............................................... 209.99 ea
1981-93 Hypertech Power Chips
Hypertech power chips increase performance and,
in most cases, increase fuel efficiency in stock,
unmodified vehicles. Simply replace the stock chip
with the Hypertech Power Chip. Street Runner chips
are designed to maximize street performance.Thermo
Power chips are designed for high heat environments
and hard competition driving.
Important: All Hypertech power chips require premium
unleaded fuel of 91 octane or higher. Not legal for
emissions controlled vehicles. Check local laws and
regulations before ordering.
Note: Thermo Master chips require a low temperature
thermostat (160o or 180o recommended) . Special order
only. 8th digit of VIN required when ordering. No further
discounts apply.
Street Runner AT/MT
PC212 1981-92 except TPI and LT1 ..
PC213 1985-92 TPI and LT1 .............
Thermo Master AT/MT
PC214 1981-92 except TPI and LT1 ..
PC215 1985-93 TPI and LT1 .............
119.99 ea
189.99 ea
129.99 ea
199.99 ea
OBD II PocketScan Plus
PocketScan® Plus is the most advanced compact code
reader available! Besides automatically reading DTCs
(Diagnostic Trouble Codes), this scan tool provides
freeze frame data, VIN info and performs I/M-readiness
(Inspection Maintenance) testing. Displays over 4,000
OBDII generic code definitions and is compatible
with all 1996 and newer vehicles (OBD II & CAN).
Note: No further discounts apply
AC9550 ...............................................
79.99 ea
Engine Mounts
1970-73 455 Motor Mount Bolts
T82254
T83121
1967-02 Motor Mounts
1967-69 Firebird V8 Engine Frame Mounts
If your vehicle has 50,000 miles or more, the motor
mounts have been damaged or soaked with oil over a
period of time, chances are they have grown weak and
are in need of replacement. Damaged or broken mounts
can cause a dangerous condition. These reproduction
motor mounts are an inexpensive cure.
6 Cylinder Motor Mounts
Left or Right Hand Interchangeable
T82284 1968-72 250 4.1,1 mount bolt 14.99 ea
T83099 1973-76 250 4.1 .................... 7.99 ea
TT83208 1982-89 173 2.8 .................... 19.99 ea
T83208 1990-92 189 3.1 .................... 19.99 ea
T83208 1993-95 207 3.4 .................... 19.99 ea
Left Hand Side
83066
1976
231 3.8 ..................... 15.99 ea
T82383 1977-81 231 3.8 .................... 19.99 ea
T83208 1995-02 231 3.8 .................... 19.99 ea
Right Hand Side
T83174 1976-81 231 3.8 .................... 15.99 ea
T82627 1989
231 3.8, 20th ann ..... 19.99 ea
T82878 1995-02 231 3.8 .................... 20.99 ea
8 Cylinder Motor Mounts
Left or Right Hand Interchangeable
T82254 1967-69 400 6.6 .................... 12.99 ea
T83168 1975-76 455 7.5 .................... 19.99 ea
T83168 1975-77 350 5.7, VIN P & M 19.99 ea
T83168 1975-79 400 6.6 .................... 19.99 ea
T83032 1977
350-R 5.7 ................. 15.99 ea
T83168 1977-79 403 6.6 .................... 19.99 ea
T83168 1977-81 301 4.9 .................... 19.99 ea
T83099 1977-92 305 5.0 .................... 7.99 ea
T83168 1978-79 350 5.7 .................... 19.99 ea
T83099 1980-81 265 4.3 .................... 7.99 ea
T83099 1981
267 4.4 .................... 7.99 ea
T83099 1987-92 350 5.7 .................... 7.99 ea
Left Hand Side
T82256 1967
326 5.3 ..................... 9.99 ea
T83120 1969-74 350 5.7 ..................... 19.99 ea
T83120 1970-74 400 6.6 ..................... 19.99 ea
T83120 1971-74 455 7.5 ..................... 19.99 ea
Right Hand Side
T82255 1967
326 5.3 ..................... 9.99 ea
T83121 1969-74 350 5.7 .................... 19.99 ea
T83121 1970-74 400 6.6 .................... 19.99 ea
T83121 1971-74 455 7.5 .................... 19.99 ea
Correct replacement engine frame mount brackets for
all 1967-69 V8 equipped Firebird models. These frame
mount brackets are stamped in steel and are ready to
install. Sold in sets.
K576
1967-69 LH & RH ................. 74.99 set
1975-92 Motor Mount Bolt
1977-79 Motor Mount to Frame Bracket Bolts
332648
1978-81 Motor Mount Brackets
Correct original replacement bracket for 1978-81
Firebird models with small block engines. LH and
RH brackets are interchangeable.
Note: *Export and Canada only.
332648 1978-79 305, 350-L ............... 21.99 ea
332648 1980-81 305-H....................... 21.99 ea
332648* 1981
267 ........................... 21.99 ea
1967-69 Engine Conversion Brackets
This set facilitates the use of a 1970-81 Pontiac engine
in a 1967-69 Pontiac F-body chassis. Due to a 3-bolt
mounting configuration on 1970-81 Pontiac engine
blocks, adapter brackets becomes necessary for proper
engine positioning. This 2 piece engine conversion
bracket set converts 3-hole motor mount pad on block
to a 2-hole mount.
C269514 1967-69 1970-81 Pontiac ...... 54.99 set
Made of superior Hyper-Flex performance polyurethane
material. This material is impervious to vehicle
chemicals, road salt and oils. The redesigned GM “clam
shell” style insert configuration allows you to insert these
performance mounts into your existing metal shells.
Note: Specify color when ordering. Add suffix G = black,
R = red.
31116 1973-92
31127 1993-97
31116 1993-97
zinc finish ................. 24.99 ea
zinc finish LH........... 29.99 ea
zinc finish RH .......... 24.99 ea
1977-79 Trans Am Motor Mount to Block Bolts
Reproduction motor mount bolts for 1977-79 Firebird
Trans Am models with Oldsmobile 403 engine. These
bolts hold engine motor mount to engine block and
feature correct 3-A head marking as original. 8-piece
bolt set.
TA4002 1977-79 8 piece set ................ 16.99 set
1977-79 Motor-to-Frame Mounting Bolt Set
to frame
Reproduction motor mount to frame mounting bolt set
for 1977-79 Trans Am models with Oldsmobile 403
engine. This 24-piece set includes factory correct bolts,
washers and nuts with TR head marking.
TA4003 1977-79 24 piece set .............. 24.99 set
to engine
This set facilitates the use of a 1964-69 Pontiac engine
in a 1970-81 Pontiac F-body chassis. Due to a 2-bolt
mounting configuration on 1964-69 Pontiac engine
blocks, adapter brackets becomes necessary for proper
engine positioning. Using this set will also allow Trans
Am owners to use Shaker Hood systems. This 4 piece
engine conversion bracket set requires 2 motor mounts
sold separately under item# T83168.
Note: This set does not include mounting hardware.
C269513
1970-81 ................................ 144.99 set
to frame
1973-97 Poly Clam Shell Motor Mount Inserts
Reproduction motor mount bolts for 1977-79 Firebird
Trans Am models with Oldsmobile 403 engine. These
bolts hold the engine motor mount to the A-Frame
bracket and features correct tapered end.
TA4001 1977-79 4 piece set ................ 13.99 set
to engine
These mounting brackets will allow a correct
reinstallation of the Olds 350 or 403 engine into a
1977-79 Pontiac F-body. This set will also retrofit
1970-76 or 1980-81 Pontiac F-body models. This 4
piece engine conversion bracket set requires 2 motor
mounts sold separately under item # T83168.
Note: This set does not include mounting hardware.
C269503 1970-81 Olds 350-403 ......... 144.99 ea
Motor Mount Bolt Sets
Secure any engine with complete confidence with
ARP’s rugged motor mount bolts. You can choose
between black oxide finished 8740 chrome moly or
corrosion-resistant stainless steel; choice of hex or
12-point head. Sets come complete with flat washers.
Chevrolet Engine
Mount to Block
AR13312 black oxide hex head ......... 12.99 set
AR13311 black oxide 12-point ......... 12.99 set
AR43312 stainless
hex head ......... 17.99 set
AR43311 stainless
12-point ......... 17.99 set
Mount to Frame
AR43315 stainless
hex head ......... 17.99 set
Pontiac Engine
Mount to Block
AR19311 black oxide 12-point ......... 14.99 set
AR49312 stainless
hex head ......... 24.99 set
AR49311 stainless
12-point ......... 24.99 set
Engine Mounts & Brackets
415
Original GM motor mount to frame mount bolts. Installs
directly in the center of the motor mount bracket and
attaches to the frame mount.
G7279 1975-92 7/16"-14 x 5-1/8"..... 2.99 ea
Replacement engine motor mount to frame bracket
bolts for 1970-73 Firebird and T/A models with 455ci
engine. This long, specialized hex-head bolt features
a round head marking for an authentic appearance.
1253530 1970-73 2 piece ..................... 14.99 pr
Specialty Engine Tools
66789
Cam Bearing Installation Tool
Push Rod Tool
66794
small block ......... 74.99 set
Use this tool to check the length of push
rods on small block Chevrolet engines.
66789 w/3/8" studs ........ 9.99 ea
66790 w/7/16" studs ...... 9.99 ea
66787
Camshaft Installation Handle
66787
Oil Pressure Switch Socket
This socket designed with extra recess
to accommodate most oil pressure
switches and many brake lamp switches.
This 3/8" drive socket features a 1-1/16"
hex opening and a durable black
oxide coating.
X3923 ............................ 5.99 ea
Installing a camshaft just got easier by
using the right tool. Perfect tool for all
Chevrolet V6 and V8 engines.
66897 V6 & V8 ............. 24.99 ea
Degree Wheels
Note: *With degree wheel attachment
66787 degree wheel kit.. 109.99 set
66791 9" degree wheel .. 14.99 ea
Crankshaft Turning Sockets
67491* small block ......... 24.99 ea
Crankshaft Turning Socket
Two separate sockets for
turning the crankshaft.
For use with small block
Chevrolet and Pontiac
applications as
66900
listed below.
66901 small block ......... 15.99 ea
66900 Pontiac V8 .......... 17.99 ea
HD Piston Ring Compressor
Install pistons
2-1/8" to 5" (54
mm to 127 mm)
in diameter.
Positive
lock action
provides positive
compression and
fingertip release. Slip tool over piston
and tighten with L shaped wrench
to compress piston ring into piston
grooves. Insert piston into cylinder
and tap with hammer to install.
Enlarged crimped edge prevents
compressor from entering cylinder.
X2284 ............................ 10.99 ea
Engine Rotation Adapter
Crankshaft rotation adapter for
Chevrolet V8 engines allows the use
of a 1/2" drive breaker bar or a 1"
socket and breaker bar to rotate the
crankshaft when turning the engine with
the balancer already installed.
66782 ............................ 19.99 ea
X2957
Beam Type Torque Wrenches
Directly measure a variety of torque
values in English and metric when
tightening fasteners with this nonratcheting torque wrench. Pointer
moves clockwise or counterclockwise.
Easily calibrated by bending pointer to
zero before use.
X2955 1/4" fixed, inch/lbs 54.99 ea
X2956 3/8" fixed, inch/lbs 71.99 ea
X2957 1/2" fixed, foot/lbs 65.99 ea
Top Dead Center Locator
66792
14mm threads .....
1964-79 Engine Lift Hook
7.99 ea
Flywheel Turner
Valve Spring Compressor
This tool hooks into the flywheel teeth to
rotate the crankshaft. Use when working
on clutches., transmissions, installing
rings, or other jobs which require the
crankshaft to be in a specific position.
Spring tension aids tool engagement
on the flywheel.
X2270 ............................ 30.99 ea
K
Oil Pump Primer
Chevrolet Engine Lift Brackets
Unique
formula dissolves in
oil. Can be applied
to ring lands in
order to prevent
micro welding
during initial break-in. Combine
with the Joe Gibbs BR break-in oil
(P/N's BR106 or BR107) for proven
protection during break-in.
AG728 1 pound can ........ 21.99 ea
AG732 1 oz tube ............. 2.99 ea
416
Lift brackets were installed on the intake
manifold for quick assembly ease on the
production line. Installing these engine
lift brackets will help make removing
and installing the engine easier by
providing strong lift points. Available
for small block (SB) Chevrolet V8
engines. One pair required per engine.
HC70
universal SB .... 26.99 pr
1256601 1976-79 SB .... 29.99 pr
Y16750 compressor........ 41.99 ea
Y16910 bolt .................... 1.99 ea
with bushing ....... 21.99 ea
Engine Assembly
Grease
Engine Tools
This original style lift hook is designed
for 1964-79 Pontiac V8 engines. The
hook mounts to the front of the timing
chain cover on the right hand upper
bolt. Manufactured from heavy gauge
silver zinc plated steel.
A8700177 1964-79 ........ 7.99 ea
HC70
Faster than conventional compressors
because there is no need to readjust the
tool after each spring.
Note: When space prohibits use of cam
handle, replace the handle with a bolt and
turn the socket.
66896
Pontiac Engine Lift Bracket Set
These engine lift brackets are designed
to bolt to the ends of each cylinder head
to remove the engine from the vehicle.
Brackets are made from .020" thick steel
and have an .88" x 1.00" hook slot. Each
is painted with epoxy coating and use
either 3/8" or 7/16" mounting bolts.
Grade 5 or higher bolts recommended.
G9429 ............................ 15.99 set
66778
Valve Lash Wrench Sets
The Engine Tilter
Choose from a variety of different
wrench sets for valve lash adjustments.
w/1/8" Allen
66779 7/16" wrench......... 21.99 set
w/3/16" & 1/8" Allen
66778 1/2" wrench........... 21.99 set
w/3/16" & 7/32" Allen
66780 9/16" wrench......... 24.99 set
66781 5/8" wrench........... 21.99 set
Works with standard engine hoists to
provide an additional axis to maneuveradjust the angle of the engine with a
turn of the handle! The Engine Tilter
is rated for 1200 pounds, made from
steel, weighs only 14 pounds, and comes
fully assembled. Includes an upper lap
link and four 20" chains. Made in USA.
MN2087 ....................... 149.99 ea
Rocker Stud Tool
Designed for not only removing rocker
studs, but aligning as well.
66783 ............................ 15.99 ea
Specialty Engine Tools
AC7528
Mechanic’s Stethoscope
Locates the source of engine noise
quickly. Listen for trouble by tracing
the sound of flowing water, oil, gas or
steam. Identify piston slap, worn gears,
faulty valves, water pump failure and
more! The handle is completely shock
resistant. Disassembles for storage.
AC7528
AC7529
Note: Keep this tool away from moving,
rotating and electrical components.
X835
............................ 18.99 ea
Actron Advance Timing Light
This Advance Timing Light features an
all metal inductive pickup, bright Xenon
flash, and one-touch control. Available
with a degree dialed knob for easy timing
adjustments or a digitally-controlled
LED display and tachometer functions.
AutoAnalyzer Digital Multimeter
Remote Starter Switch
Performs standard electrical tests on
the car and workbench to locate faulty
wiring, test electrical components,
engine sensors, ignition and fuel
systems and starting/charging system
voltage. Features 19 ranges and
automatic zero adjustment for volts,
amps, and battery tests, as well as an
easy to read backlit LCD. Includes color
coded detachable test leads, alligator
clips, and a comprehensive user manual.
Allows one person to start or crank the
engine from under the hood. Ideal for
compression test or bumping engine
onto TDC (top dead center) timing
marks for valve, distributor or camshaft
adjustment. Power tool type trigger
switch for regular use with medium
currents. Heavy duty Neoprene leads.
10-Amp, medium current clips open to
1/2". Protective rubber boots prevent
electrical shorts. Ergonomic handle.
One year warranty. Made in USA.
AC7665
......................... 31.99 ea
AC7853
.........................
9.99 ea
AC7528 adjustable knob . 69.99 ea
AC7529 LED display ...... 94.99 ea
Thermometer w/Laser Pointer
AC7828
Compression Testers
Compression tester detects worn rings,
burnt valves and blown head gaskets.
Features external pressure release valve,
full 2-1/2" easy-to-read face. U.S. and
metric scales. 14" high pressure flexible
oil and grease resistant hose. 14mm
and 18mm ends fit most spark plug
openings. Professional kit features a
detachable hose and includes adapters
for all standard spark plug threads,
a repair kit with valves and rubber
O-rings.
TD700101
AC7876
AC7854
......................... 34.99 ea
......................... 59.99 ea
Inch Thread Identifiers
6-32, 8-32, 10-24, 10-32, 1/4-20,
1/4-28, 5/16-18, 5/16-24, 3/8-16,
3/8-24, 7/16-14, 7/16-20, 1/2-13,
1/2-20.
AC Delco 6V Inspection Camera
Metric Thread Identifiers
M4x0.7, M5x0.8, M6x1.0, M8x1.0,
M8x1.25, M10x1.0, M10x1.25,
M10x1.50, M12x1.25, M12x1.5,
M12x1.75.
Thread Detective
This precise, easy-to-use thread
identification tool is well suited for
distinguishing between similar inch and
metric threads on both nuts and bolts.
Available in a heavy duty plastic box or
attached to a wire lanyard. Comes with
both metric and inch nut and bolt sizes.
TD700101 in plastic box .. 49.99 set
TD700102 wire lanyard .... 34.99 set
Actron AutoTroubleshooter
This ingenious tool features automatic
reverse polarity indication, automatic
zero adjustment for volts and amps for
accurate measurements and overload
protection on all ranges. Performs all
standard electrical tests for on-car and
bench troubleshooting. Locate faulty
wiring, test electrical components,
engine sensors, ignition and fuel systems
and your starting/charging system.
AC7677
......................... 49.99 ea
Thanks to advanced digital imaging
technology, you can now see areas
that were out of view and unreachable
with inspection mirrors. Features a 3"
high-resolution color LCD display and
small 8mm (0.32") camera head. The
camera features a two-setting 180˚ view
flip, 12-setting adjustable zoom (up to
250%), and 5-setting LED brightness
control, and a video-out port for viewing
on full size monitors. The waterproof
camera head and flex-cable allows you
to explore virtually any environment.
Important: Requires 4 AA batteries (not
included).
AC100101 ....................... 147.99 ea
Engine Tools
417
Synthetic lubricant designed
for use in reassembling
repaired equipment.
It utilizes durable
synthetic molecules
that adhere to metal
surfaces and create
an extremely strong
barrier minimizing the
possibility of metalto-metal contact while
providing excellent
protection against rust
and corrosion to both ferrous and
nonferrous metals. Formulated with
Royal Purple’s proprietary Synslide
additive technology.
RP01335 8 oz. bottle....... 19.99 ea
RP12335 case of 12 ........ 215.99 cs
Remote Starter Switch
Start and crank engine from under the
hood or from either side of the vehicle.
Ideal for compression test or bumping
engine onto TDC (top dead center)
timing marks for valve, distributor or
camshaft adjustment. Heavy-duty push
button trigger switch, 5-foot heavy-duty
leads, 12 gauge conductors. 20-Amp,
high current clips open to an extra wide
5/8” for easy hook-up. Made in USA.
TD700102
AC7826 tester only ........ 24.99 ea
AC7828 professional kit 39.99 ea
Royal Purple
Max Tuff Assembly Lube
Aim this IR thermometer at the target,
press a button, and read the temperature
display. Verify the temperature in your
AC system or find an overcharge in
your electrical systems. System-OnChip technology creates a compact,
lightweight design with a measurement
range of -58ºF to +932ºF (-50ºC to
+500ºC). Includes two AAA batteries
and belt holster.
LS Conversion Components
Supercharged!
HP
TQ
Bore/Stroke
Cam Type
Cam Lift
Duration @ .050
Valve Size
Compression Ratio
Rocker Ratio
Recommended Fuel
Balancing
Max RPM
638
604
4.065" x 3.622"
hydraulic roller
.562" x .558"
211º int./230º exh.
2.16" int./1.59" exh.
9.1:1
1.7:1
92 octane
internal
6600
LSA & LS9 Intercooler Fluid Pump
This factory-engineered mechanical pump circulates
coolant between the intercooler on top of the
supercharger and heat exchanger for 6.2L LSA and 7.0L
LS9 engines. It can also be installed with any forced
induction system that uses a liquid to air intercooler.
Note: Special order, prepaid only.
G25015
LSA/LS9 ........................................................................... 264.99 ea
LS9 6.2L/638HP
The Corvette ZR1 LS9 6.2L engine in a fully-dressed crate engine package! The LS9's
lightweightreciprocatingmass,sixthgenerationsuperchargerandhighflowcylinderheads
combine to provide 638 horsepower at 6500 rpm with a neck-breaking 604 ft-lbs of torque.
Includes a 14" manual transmission flywheel and an intercooler pump. Requires
an external oil tank for the dry sump oiling system. Requires a water tank for the
charge cooler. Requires a heat exchanger for the charge cooling system. Does not
include ECU or wire harness. Accessory drive system not included. Crankshaft has
a unique 9 bolt flywheel mounting pattern. May require an adapter for use with some
transmissions. This engine is intended for installation in pre 1976 non pollution
controlled vehicles or for off road use.
G25012
Note: Special order, prepaid only. Shipped truck freight. No further discounts apply.
G25010
LS9/6.2L ..................................................................... 24,784.99 ea
Supercharged!
HP
TQ
Bore/Stroke
Cam Type
Cam Lift
Duration @ .050
Valve Size
Compression Ratio
Rocker Ratio
Recommended Fuel
Balancing
Max RPM
556
551
4.065" x 3.622"
hydraulic roller
.492"int./.480" exh.
198º int./216º exh.
2.16" int./1.59" exh.
9.1:1
1.7:1
92 octane
internal
6600
LSA 6.2L Accessory Drive System
Front engine accessory drive system for the 6.2L CTS-V LSA engine without AC. The
drive system assembly comes with alternator, power steering pump, brackets, bolts,
tensioners, pulleys, and belts. Includes instructions. AC add-on kit sold separately
and includes mounting bracket, belt, AC compressor, hardware and instructions.
Note: Special order, prepaid only. No further discounts apply.
G25012
G25013
LSA accessory drive set.................................................... 949.99 set
LSA AC add on kit............................................................ 299.99 set
LSA 6.2L/556HP
The supercharged 6.2L LSA engine from the Cadillac CTS-V and Camaro ZL-1 in
a fully dressed crate engine package! This cousin of the Corvette LS9 produces 556
horsepower at 6100 rpm with 551 lbs of torque at 3800 rpm. It's a rare engine that
offers smooth and well-balanced performance. Includes a 14" dual mass manual
transmission flywheel and an intercooler pump. Does not include ECU, wire harness,
or accessory drive system. Requires a water tank for the charge cooler and a heat
exchanger for the charge cooling system. May require an adapter for use with some
transmissions. This engine is intended for installation in pre 1976 non pollution
controlled vehicles or for off road use.
Note: Special order, prepaid only. Shipped truck freight. No further discounts apply.
G25011
LSA/6.2L .................................................................... 15,005.99 ea
Important: This kit includes an alternator bracket which is pre-installed and bolted behind
the water pump on crate engines.
G25017
LSA Supercharger Kit
K
LS9 6.2L Accessory Drive System
Front engine accessory drive system for the 6.2L LS9 engine. The drive system assembly
comes with alternator power steering pump, power steering reservoir and ac compressor
along with all brackets, bolts, tensioners, pulleys, belts. Includes instructions.
LS9 accessory drive set .................................................. 1894.99 set
Add horsepower to any LS
engine with rectangular port
L92-style heads! This is
the same 1.9L supercharger
found on the 6.2L LSA
engine with a slightly different
intercooler cover. A pair of Eaton
four lobe high helix rotors makes
G25016
this unit extremely efficient at low
G25018
rpm but sustains the output into high
rpm. On a 6.2L engine it produces about 9 lbs of boost but boost pressure may
vary with engine displacement and compression ratio. This kit includes intake,
fuel injectors, cast cover, intercooler, front pulley, throttle body, and gasket set.
Installation requires proper tuning of the vehicle computer system along and
a high pressure, high volume fuel pump. Intercooler requires a liquid cooling
system consisting of a heat exchanger, a coolant tank and a coolant pump. The
ZL1 fuel pump module delivers 66 gph at 65 psi, a significantly greater volume
than a standard pump. This module is perfect for custom tanks and motors up to
600 hp.
The LSA and LS9 V8s are some of the most advanced crate motors available,
and if you're installing one of these supercharged 6.2 liter beasts, you'll need the
electronics to keep these formidable engines under control. These sets come with the
hardware needed to wire and run LSA and LS9 crate engines. Each set comes with
an engine-specific ECM, wiring harness and fuse box, as well as MAF sensor with
mounting boss, a pair of oxygen sensors with weld-in sensor bungs, an electronic
accelerator assembly, and instructions.
Important: This product may not be legal for highway use in all 50 states.
Note: Special order, prepaid only. Shipped double oversized.
Important: This engine controller is a stand-alone retrofit system for pre1976 vehicles. Not for use with pollution controlled vehicles.
OS2
G25018
G25016
LSA supercharger kit ..................................................... 7347.99 set
ZL1 fuel pump module .................................................. 294.99 ea
418
LS Conversion
LSA & LS9 Engine Controller Sets
G25014
G19299
G25014
LSA ................................................................................ 1529.99 set
LS9.................................................................................. 1630.99 set
1060256
3061856
1967-69 Firebird LS Conversion Sets
This unique conversion system takes the guesswork out of installing an LS engine
into a 1967-69 Firebird. These sets are designed to use the LH8 oil pan, positioning
the engine and transmission with room for most accessory drives, heater boxes,
power steering and brakes, and exhaust systems. The motor mounts and transmission
crossmember bolt directly to the factory mounting locations. Sets are available for
T56, 4L60E, and 4L80E transmissions with your choice of red or black urethane
transmission and motor mounts. Each set includes a transmission crossmember,
engine and frame mounts, detailed instructions and mounting hardware. Exhaust
headers designed for these sets are available separately. All mounts are protected
by a manufacturers lifetime replacement warranty. Made in USA.
Important: Transmission tunnel modification may be required for T56 applications.
Notching the frame is required when using 1998-02 F-Body accessory drive with low mount
AC compressor. Some modification may be required.
Conversion With T-56 Transmission Mount
1060256
1967-69 conversion w/black mounts ...........................
1061856
1967-69 conversion w/red mounts ...............................
Conversion With 4L60E Transmission Mount
1060260
1061860
1060280
1061880
AC Frame Notch Kit
1064000
1967-92 frame notch kit ...............................................
499.99 set
499.99 set
499.99 set
499.99 set
499.99 set
499.99 set
25.99 ea
into a 1982-92 Firebird. These sets are designed to use the 1998-02 F-Body oil pan,
positioning the engine and transmission with room for most accessory drives, heater
boxes, power steering and brakes, and exhaust systems. The motor mounts and
transmission crossmember bolt directly to the factory mounting locations. Sets are
available for T56 and 4L60E transmissions with your choice of red or black urethane
Important: Non-V8 cars may require drilling new frame bracket mount locations.Notching
of the frame is required when using a 1998-02 F-Body accessory drive system with low
mount AC compressor. Some modification may be required.
3060256
3061856
3060260
3061860
1982.92 conversion w/red mounts ...............................
AC Frame Notch Kit
1064000
1967-92 frame notch kit ...............................................
489.99 set
489.99 set
489.99 set
489.99 set
25.99 ea
LS Conversion Headers
2061860
454061
Important: Some modification may be
necessary when used with 4L80E transmissions or column shifters.
Not legal on pollution controlled vehicles.
into a 1970-81 Firebird. These sets are designed to use the CTS-V or 1998-02 F-Body
oil pan, positioning the engine and transmission with room for most accessory drives,
heater boxes, power steering and brakes, and exhaust systems. The motor mounts and
transmission crossmember bolt directly to the factory mounting locations. Sets are
available for T-56 and 4L60E transmissions with your choice of red or black urethane
Important: Notching the frame is required when using 1998-02 F-Body accessory drive with
low mount AC compressor. Some modification may be required.
499.99 set
499.99 set
499.99 set
499.99 set
25.99 ea
Mid Length Headers
453661
1967-69 1-3/4" primary tubes ......................................
451261
1970-81 1-3/4" primary tubes ......................................
457261
1982-92 1-3/4" primary tubes ......................................
Long Tube Headers
453761
1967-69 1-3/4" primary tubes ......................................
453961
1967-69 1-7/8" primary tubes ......................................
454161
1967-69 2" primary tubes ............................................
451361
1970-81 1-3/4" primary tubes ......................................
451561
1970-81 1-7/8" primary tubes ......................................
451761
1970-81 2" primary tubes ............................................
457361
1982-92 1-3/4" primary tubes ......................................
457561
1982-92 1-7/8" primary tubes ......................................
457761
1982-92 2" primary tubes ............................................
Stepped Long Tube Headers
453861
1967-69 1-3/4 to 1-7/8" primary tubes ........................
454061
1967-69 1-7/8" to 2" primary tubes .............................
451461
1970-81 1-3/4" to 1-7/8" primary tubes .......................
451661
1970-81 1-7/8" to 2" primary tubes .............................
457461
1982-92 1-3/4" to 1-7/8" primary tubes .......................
457661
1982-92 1-7/8" to 2" primary tubes .............................
LS Conversion
629.99 set
629.99 set
629.99 set
839.99
839.99
939.99
839.99
839.99
939.99
839.99
839.99
939.99
set
set
set
set
set
set
set
set
set
939.99
939.99
939.99
939.99
939.99
939.99
set
set
set
set
set
set
419
2060256
2061856
2060260
2061860
AC Frame Notch Kit
1064000
1967-92 frame notch kit ...............................................
These headers are designed for Muscle
Rods LS engine mounting kits and
are available in a variety of sizes
and styles for 4.8L, 5.3L and 6.0L
LS engines. A silver ceramic coating
keeps temperatures under control
and provides a great long-lasting
appearance. Each set is designed
to clear the factory AC box, power
steering, power brakes, crossmember,
and oil pan when installed with a
Muscle Rod LS conversion kit. Limited
lifetime manufacturer's warranty. Made
in USA.
Low Mount Serpentine
Belt Drive Complete Set
Our set is complete and ready
to bolt on. Includes; pulley set,
idler kit, power steering kit, GM
internal 140 amp alternator, 508
Sanden compressor and front
cover, aluminum alternator fan,
all mounting bolts, gaskets
and belt.
SP3003
Note: *Shipped overweight.
view on engine
SP3001* alt, air, no PS, polished .....................................................
SP3002* alt, air, no PS, chrome .......................................................
SP3003* low p/side alt, low d/side PS, polished .............................
SP3004* low p/side alt, low d/side PS, chrome ...............................
SP3005* low d/side alt, low p/side AC w/hi mnt PS polished .........
SP3006* low d/side alt, low p/side AC w/hi mnt PS chrome ..........
SP3007
SP3008
1739.99
1971.99
1589.99
1809.99
2109.99
2389.99
low p/side alt only, polished.............................................. 1039.99
low p/side alt only, chrome ............................................... 1169.99
set
set
set
set
set
set
set
set
High Mount Serpentine
Belt Drive Complete Set
This set locates alternator
and AC up high. The
perfect solution when
cross members and
steering gear limit
clearance for low mount
accessories. The set includes:
powers steering set, GM 140 amp
alternator complete with aluminum fan
and pulley, 508 Sanden compressor with
front cover, idler, serpentine belt, all necessary
brackets, and hardware.
Vintage Air Front Runner Drive
Vintage Air's Front Runner Drive features include a block mounted truss CNC
machined from T-6061 billet aluminum available in a bright finish with machined
finished truss or black hardcoat finish. The black hardcoat sets include black hardcoated
pulleys and black anodized bracket, clutch and tensioner covers. Exclusive Front
Runner spring tensioner provides continuous SAE-spec static and dynamic belt
tensioning for OEM quality belt life. Hardcoated aluminum pulleys are precision
machined, reduce weight and wear like steel. Pulley sizes are engineered and matched
for optimum component speeds. This is a very compact package that does not have
any of the accessories hanging way past the engine. Each drive uses the compact
GM Type II power steering pump (if applicable), Hi-performance water pump and
GM 140 amp alternator. The Vintage Air TiteFit Line/compact compressor package
is perfect for that nice tight and clean look
Important: Not compatible with any LT1 engine.
Note: Shipped oversize. No further discounts apply.
SP3042
view on engine
Note: Shipped overweight. No further discounts apply.
K
174014
With Power Steering
SP3042 LS1/LS6 Vette, alt, AC & PS polished..............................
SP3043 LS1/LS6 Vette, alt, AC & PS chrome ...............................
SP3044 LS2 Vette alt, AC & PS polished ......................................
SP3045 LS2/LS6 Vette, alt, AC & PS chrome ...............................
SP3046 LS1 IROC/TA alt, AC & PS polished ...............................
SP3047 LS1 IROC/TA alt, AC & PS chrome.................................
SP3048 4.8, 5.3 6.0 Alt, AC & PS polished ...................................
SP3049 4.8, 5.3 6.0 Alt, AC & PS chrome .....................................
SP3050 LS1, LS6, LS2, LS7 Alt & PS only polished ....................
SP3051 LS1, LS6, LS2, LS7 Alt & PS only chrome .....................
SP3052 IROC/TA Alt & PS only polished .....................................
SP3053 IROC/TA Alt & PS only chrome.......................................
SP3054 4.8, 5.3, 6.0 Alt & PS only polished .................................
SP3055 4.8, 5.3, 6.0 Alt & PS only chrome ...................................
Without Power Steering
SP3056 LS1/LS6 Vette, alt, AC polished .......................................
SP3057 LS1/LS6 Vette, alt, AC chrome.........................................
SP3058 LS2/LS6 Vette alt, AC & PS polished...............................
SP3059 LS2/LS6 Vette, alt, AC chrome.........................................
SP3060 LS1 IROC/TA alt, AC polished.........................................
SP3061 LS1 IROC/TA alt, AC chrome ..........................................
SP3062 4.8, 5.3 6.0 alt, AC polished..............................................
SP3063 4.8, 5.3 6.0 alt, AC chrome ...............................................
1974.99
2254.99
1974.99
2254.99
1974.99
2254.99
1999.99
2279.99
1479.99
1679.99
1479.99
1679.99
1489.99
1689.99
set
set
set
set
set
set
set
set
set
set
set
set
set
set
1479.99
1689.99
1479.99
1689.99
1539.99
1689.99
1504.99
1714.99
set
set
set
set
set
set
set
set
OS1
Bright Front Runner Drive
LS1 & LS2
174014
with power steering (includes pump) ...........................
174016
with power steering (without pump) ............................
174015
without power steering .................................................
LS7
174012
174019
175012
L92 LS Front Runner Spacer Set
176005
L92 LS ..........................................................................
Black Hardcoat Front Runner Drive
LS1 & LS2
174011
174017
175011
LS7
174013
174018
175013
L92 LS Front Runner Spacer Set
176005
L92 LS ..........................................................................
SP3026C9
2729.99 set
2569.99 set
2141.99 set
2729.99 set
2569.99 set
2474.99 set
244.99 set
2694.99 set
2499.99 set
2399.99 set
2694.99 set
2499.99 set
2399.99 set
244.99 set
SP3026C
LS Series Engine Covers
SP3025
1967-69 LS1 Headers
Street & Performance headers have stainless steel head and collector flanges for
optimum gasket sealing. Headers are complete with specially designed gaskets, to
further ensure a worry-free seal and pre-installed O2 sensor bungs. Available in raw
steel or a with a satin silver thermal coating inside and out.
Note: Shipped double oversize. No further discounts apply.
SP3024
SP3025
1967-69
1967-69
420
LS Conversion
OS2
plain ................................................................ 499.99 ea
coated .............................................................. 619.99 ea
Give your LS-series engine a cool custom look with these smooth-top covers. These
engine covers are manufactured to your specifications in your choice of black, red,
blue or white (if painted) or real carbon fiber; custom-fit to your specific LS engine
and accessory drive pulley set-up and the option of a pre-cut oil filler hole.
Note: Specify color, vehicle year/model, type of LS engine and accessory belt drive setup and
specify pre-cut oil filler hole option and desired color. Special order.
LSx Ignition Coil Covers
SP3026
painted ............................................................................ 344.99 pr
SP3026C
carbon fiber ..................................................................... 431.99 pr
LS9 Engine Cover
SP3026C9 carbon fiber ..................................................................... 449.99 ea
LS Coil Covers - Big-Block-Style
E7118
Edelbrock Performer RPM LS1
Looking to install a carburetor on an 1997-02 LS1?
Edelbrock has you covered. This performer RPM
manifold set comes with the major components needed
to install a 600-800 cfm carburetor on a modern LS1,
LS6, LM7, LR4 and LQ4, maximizing maximum
horsepower and torque from 1500 to 6500 rpm. The
system includes a 4 barrel non-EGR manifold, MAP
sensor, wiring harness and MSD ignition controller for
LS1 24X ignition systems (offers choice of 6 timing
curves), along with throttle and trans cable brackets.
Note: 600-800 cfm carburetor recommended. Not legal for
pollution controlled vehicles. Ships Overweight. No further
discounts apply.
E7118
E71187
manifold w/ignition control .. 754.99 set
manifold only non-EGR ........ 289.99 ea
These coil covers from Holley Performance give
modern LS engines a classic big block appearance.
Made from a lightweight, durable composite that can
be painted to match any color scheme and designed to
fit on LS2, LS3 and LS7 and other LS-family engines
using LS3 style valve covers and coils. Set includes
covers, OE style ball mount snap on studs, oil cap,
oil fill adaptor and detailed installation instructions.
Important: Covers are a universal fit and require trimming
for proper installation. No further discounts apply.
H2421
LS coil covers........................ 134.99 set
Note: Requires the use of LS3 dipstick and dipstick tube. No
further discounts apply.
H3021
Now you can have late model muscle with a classic look
with dual quads on a LS1 engine. This dual carburetor
set up is designed to maximize performance in the
1500 to 6500 rpm range. Available with or without
carburetors and individually in your choice of natural
finish or with an elegant Endurashine finish.
Important: Not legal for pollution controlled vehicles.
Ships overweight. No further discounts apply.
FB1110P
1967-69 LS- Engine Plates
LS- engine adapter plates for 1967-69 Firebird models.
The introduction of the LS- engine halted the ease of
interchangeability between muscle and modern cars. By
flipping the engine mounts upside down, the LS- sits
lower in the chassis and as far back against the firewall
as possible giving you good weight distribution and
improved center of gravity. These LS- engine plates are
CNC machined from 6061-T6 aluminum and allows the
simple installation of an LS- style engine using standard
small block motor mounts in your 1967-69 Firebird.
AT1003 1967-69 LS- engine plates ... 139.99 pr
E7518* natural finish ......................... 879.99 set
E75184* Endurashine finish ................. 999.99 set
Manifold Only
Non-EGR dual-quad manifold in natural finish.
E75187
natural finish .......................... 379.99 ea
1026100
1026102*
1026300
1026200
1026000
LH8 oil pan ...........................
LH8 oil pan ...........................
CTS-V oil pan .......................
1998-2002 F-body oil pan.....
oil pick up tube girdle ...........
269.99
289.99
409.99
409.99
26.99
set
set
set
set
ea
85010
LS Cast Iron Exhaust Manifolds
E2068
E20684
Note: *500 cfm Thunder AVS carburetors recommended.
No further discounts apply,
LS Oil Pans For Conversion Kits
These OE pan kits include the gasket, windage tray,
oil pick up tube, and mounting hardware. An optional
oil pump pick up tube girdle corrects the fit and seal
of the pick up tube in the oil pump with an extra bolt
to clamp it in place.
Important: *Machined for bypass valve.
Note: Must be used in conjunction with LS conversion sets.
Note: Shipped overweight. No further discounts apply,
natural finish ......................... 1769.99 set
Endurashine finish ................ 1949.99 set
Without Carburetors
Already have a pair of 500 cfm carburetors? These
sets include the non-EGR dual quad manifold, the
MSD ignition controller, wiring harness, MAP sensor,
gaskets and brackets.
1026100
4592
LS1/LS6/Vortec Engine Mount Plates
These engine mount plates are needed when installing
a LS1, LS6 or Vortec engine into a vehicle that
was originally equipped with a small block engine.
Available in a 4 piece set that includes the plates and
motor mount pads or the plates can be purchased
separately. Includes grade 8 hardware.
4592
2 plates with 2 pads .................. 71.99 set
4572
2 plates only ............................. 55.99 set
These Hooker cast iron exhaust manifolds are designed
to hug the engine block closely so they will work with
a variety of LS engine swaps or as a replacement. The
contoured shape increases flow and performance over
stock manifolds with a traditional look. Fits all LS engines
up to 500 horsepower except LS7 and LS9 and have
been proven to fit 1970-81 F-Body vehicles. Made from
hi-silicon ductile iron for years of durability and corrosion
resistance. Available in a range of different finishes.
Note: Not C.A.R.B. certified and may not be legal for use
in some states on pollution controlled vehicles. No further
discounts apply.
85010
85013
85011
85014
85015
raw finish ................................
black ceramic finish ...............
silver ceramic finish ...............
titanium ceramic finish ...........
cast iron gray ceramic finish ..
LS Conversion
284.99
379.99
379.99
379.99
379.99
pr
pr
pr
pr
pr
421
With Carburetors
These complete systems include a non-EGR dual
quad manifold with tuned and matched Thunder
AVS carburetors, an MSD ignition controller that
works with the LS1, LS6, LM7, LR4 and LQ4 with
24X ignition systems, wiring harness, MAP sensor,
fuel inlet, progressive linkage, gaskets and brackets.
1955-87 LS engines ............ 344.99 set
1967-81 Firebird Billet LSx Engine Mounts
Enhance the underhood appearance of your Firebird by
replacing the OEM engine mounts with these universalstyle billet LSX engine mounts. Comes with all required
hardware and bushings for a complete installation.
Available in a variety of finishes to suit your tastes.
FB1110N 1967-81 natural ................... 254.99 set
FB1110P 1967-81 polished ................ 289.99 set
FB1110B 1967-81 black ..................... 289.99 set
FB1110C 1967-81 chrome .................. 324.99 set
E7518
Edelbrock Air-Gap Dual Quad LS1
1955-87 Holley Retrofit LS Oil Pan
Holley's Retro LS oil pan is designed for maximum
chassis and ground clearance on 1955-87 GM rear
wheel drive V8 applications originally equipped with
a rear sump oil pan. Each pan is made from machined
cast aluminum and uses an original style oil filter and
gasket. Features provisions for a factory style oil cooler
and attachment points for the factory bellhousing. Set
includes sump baffle, pick-up tube, sump plug, oil filter
stud, and oil passage cover.
G9361
1997-06 Crankshaft Balancers
S9501
MSD Atomic EFI LS Set
This EFI system makes installing and tuning an LS
engine easy! A power module, an ECU, and most of
the wiring is built into the fuel rails to keep installation
simple. A handheld tuner enables quick setup and custom
programming. Available for LS2/LS3, L92, LS7 as well
as Gen III and Gen IV truck engines. Installation kits
for LS1/LS6 engines available separately. Supports
up to 1,000 hp.
You’ll need to know what balancer you have to be able
to order the right belt system. Corvette is the thinnest
while truck balancers are the thickest.
Corvette-LS1, LS6
G9361 1997-05 .................................. 132.99 ea
IROC/TA
G3888 1998-02 .................................. 73.99 ea
C/K Truck
G9363 2003-06 .................................. 169.99 ea
1699.99
1699.99
1699.99
1999.99
set
set
set
set
174.99 set
SP3040
SP3041
1997-03
1997-03
1997-03
2004-up
2004-up
2004-up
360º swivel/15º neck
straight neck ............
straight neck ............
119.99
119.99
84.99
104.99
104.99
99.99
set
set
set
set
set
set
SP3013
LS Crank Cover
Complete the look, our crank cover gives your motor
that “finished” look.
Note: Use blue locktite on the cover bolts.
Polished
SP3013
SP3018
SP3020
SP3022
Chrome
SP3019
SP3017
SP3021
SP3023
LS-1 IROC/TA .........................
LS-1 IROC/TA .........................
LS-2 Vette.................................
LS-7 Vette.................................
82.99
84.99
84.99
84.99
ea
ea
ea
ea
LS-1 Vette.................................
LS-1 IROC/TA .........................
LS-2 Vette.................................
LS-7 Vette.................................
99.99
99.99
99.99
99.99
ea
ea
ea
ea
Conversion Adapters For Gauges
This oil pressure tree will relocate your oil pressure
sensor to above the oil filter. The 12mm coolant adaptor
taps to the rear of the passenger side head
for VDO and Dakota Digital gauges.
SP3014
SP3040
SP3041
SP3066
Depending on your engine and application you
will need one of these water necks to simplify your
conversion. With three available, all you need to do is
verify which will work for you.
All water necks are polished.
SP3064
SP3065
SP3066
SP3067
SP3068
SP3069
Note: Fuel pump not included. Special order, must be
prepaid. No further discounts apply.
Important:* Gen III 1999 to mid 07. Gen IV late 2007-13.
** Use with 29501.
Atomic EFI Sets
29571* Gen III LS ............................
29581* Gen IV LS ............................
29501
LS2/LS3 & L92 ....................
29601
LS7 .......................................
Installation Sets
29551** LS1/LS6 install kit ...............
SP3064
LS1 Water Neck and Thermostat
oil pressure tree ........................ 29.99 ea
12mm coolant sensor adaptor .. 24.99 ea
Alternator Adapter Plugs
Joe Gibbs LS30 Synthetic Oil
This LS30 synthetic 5W-30 oil is specifically
formulated for high performance LS-series engines
such the 6.2L LS3 found in the 5th generation Camaro
SS or the 6.2L supercharged LSA under the hood
of the new ZL1. Using advanced synthetic-based
oils, LS30 delivers high temperature and high shear
protection, making it ideal for high performance LS
engines, especially those that have been turbocharged
or supercharged.
JG1320 5W30
quart....................... 10.99 ea
JG1321 5W30
case of 12 quarts .... 131.99 cs
These handy plugs will make your life much easier.
They provide direct fit connections without the trouble
of splicing wires.
K
CS 130 & 144
SP3014 gauge #12102921 .................... 29.99 ea
SP3015 light #12083462 ...................... 29.99 ea
SI Conversion
SP3016 ext. to int. reg .......................... 17.99 ea
LS1 Single Fuel Line Filter/Regulator Set
This handy set will allow you to maintain a single
fuel line running to the engine, making for a “clean”
installation. By localizing the filter and regulator
for the return of excess fuel to the tank, it cleans up
and simplifies this critical portion of the conversion.
Includes a 3/8" and a 5/16" stainless
steel fitting.
1998-02 LS1 Alternator Mounting Set
Eliminate excess belt length and tensioners. This set
mounts the alternator with a shorter, manually adjusted
belt. To use smaller pulleys, simply change belts. Black
anodized aluminum construction. Includes hardware.
For use with electric water pump without
PS or AC.
SP3029
BX50004
422
filter kit ................................... 184.99 ea
LS Conversion
1998-02 .............................. 149.99 set
March Performance Pulleys
Three Idler Pulleys For No-Slip Operation!
Three Idler Pulleys Ensure
No-Slip Operation!
13140
13225
Pontiac Style Track Serpentine Conversion
Pontiac Sport Track Serpentine Conversion
Upgrade your V-belt pulleys to a more efficient
serpentine system from March Performance and get
style with no-slip operation. Each set features a stout
one-piece combination alternator and A/C bracket
and an oversize crank pulley to improve low-speed
cooling and charging. Choose from the Sport Track
sets with black or silver powder coated bracket and
black powder coated pulleys, or upgrade to Ultra Sport
Track with clear powder coated brackets, pulleys,
and pulley covers. Includes all applicable mounting
hardware. Sets are available for Pontiac 326, 350, 389,
400, 421, 428, and 455ci V8 engines. Made in USA.
Important: Sets require a 1968 or newer 4 bolt balancer
without v-groove and a 1969 or newer 11 bolt timing cover.
1970 and newer models require an electric fuel pump.
Note: Sets with Type 2 power steering pumps do not include
hoses or remote reservoir. No further discounts apply.
Sets Include
• Tuff Stuff Chrome 105 Amp Alternator
• Alternator Pulley And Fan
• Chrome Sanden AC Compressor
• Edelbrock Water Pump And Pulley
• Alternator/AC Bracket
• Crank Pulley
• 3 Idler Pulleys For Better Belt Wrap
• Belt Tensioning Tool
• Billet Pulley Cover Caps (Ultra Sets Only)
Sets With Power Steering Also Include
• Tuff Stuff GM Type 2 Power Steering Pump
• Power Steering Pulley
• Billet Pulley Cover Cap (Ultra Sets Only)
• Power Steering Bracket
Note: Sets require a 71" 6 rib serpentine belt.
Sport Track
1320508 black powder coat ............. 1779.99 set
1320509 silver powder coat ............. 1779.99 set
Ultra Sport Track
13225
clear powder coat .............. 2109.99 set
1970+ w/AC and Type 2 PS Pump
Note: Sets require a 69.5" 6 rib serpentine belt.
Sport Track
Ultra Sport Track
13230
w/AC w/o Power Steering
Sport Track
Ultra Sport Track
13220
Note: Sets do not include power steering hoses or remote
reservoir. No further discounts apply.
Sets Include
• Chrome Or Billet 105 Amp Alternator
• Alternator Pulley w/Fan And Nose Cover
• Edelbrock Water pump and pulley
• Crank pulley
• 3 Idler Pulleys (2 On 13145 & 13150 Series Sets)
• Mounting Hardware
• Power Steering Pulley w/Nose Cover
• Brackets
• GM Type 2 Or Chrome Canister and Billet Canister
Power Steering Pumps
1967-69 w/AC And Type 2 PS Pump
Note: Sets require a 71" 6 rib serpentine belt
1314006
13140
1314007
1314008
1970+
chrome .............................. 2329.99
clear powder coat.............. 1959.99
black onyx powder coat .... 2139.99
black powder coat ............. 1965.99
w/AC And Type 2 PS Pump
set
set
set
set
1313506
13135
1313507
1313508
chrome .............................. 2329.99
clear powder coat.............. 1849.99
black onyx powder coat .... 2019.99
black powder coat ............. 1849.99
set
set
set
set
13130
clear powder coat.............. 1599.99 set
1313008
black powder coat ............. 1599.99 set
w/o AC w/Chrome PS Pump
1314506
chrome .............................. 2329.99 set
13145
1314508
w/o AC w/Billet Alt And PS Pump
13170
Pontiac Revolver Serpentine Conversion
This serpentine belt conversion for Pontiac 326-455ci
V8 engines customizes your engine bay and provides
rigid support for the alternator and AC compressor with
an optional separate bracket that allows for models
with power steering. Three separate idlers maintain
belt to pulley contact for “no slip” operation once belt
tension has been set with the convenient adjustment
tool. Includes mounting hardware and instructions.
Available in chrome or your choice of maintenancefree powder coating in clear, black onyx, or black.
Made in USA.
Note: Sets do not include power steering hoses or remote
reservoir. No further discounts apply.
Sets Include
• Chrome 105 Amp Alternator
• Alternator Pulley w/Fan And Nose Cover
• Edelbrock Water pump and pulley
• Crank pulley
• 3 Idler Pulleys For Better Belt Wrap
• Power Steering Pulley w/Nose Cover
• Brackets
• GM Type 2 Power Steering Pump
Note: Sets require a 71" 6 rib serpentine belt
1317006 chrome ............................... 2329.99
13170
clear powder coat............... 1901.99
1317007 black onyx powder coat ..... 2099.99
1317008 black powder coat .............. 1901.99
1970+ w/AC And Type 2 PS Pump
1316506
13165
1316507
1316508
chrome ............................... 2329.99
clear powder coat............... 1849.99
black onyx powder coat ..... 2099.99
black powder coat .............. 1849.99
13150
1315008
13160
1316008
set
set
set
set
set
set
set
set
clear powder coat............... 1599.99 set
black powder coat .............. 1599.99 set
423
This serpentine belt conversion for Pontiac 326-455ci
V8 engines customizes your engine bay and provides
rigid support for the alternator and AC compressor with
an optional bracket for models with power steering.
Three separate idlers maintain belt to pulley contact
for “no slip” operation once belt tension has been set
with the convenient adjustment tool. Includes mounting
hardware and instructions. Available in chrome or your
choice of maintenance-free powder coating in clear,
black onyx, or black. Made in USA.
Pontiac V-8 Serpentine Conversion
1967-Up 326, 350, 389, 400, 455 C.I.
Customize your engine compartment and virtually eliminate
the risk of thrown belts with this one-belt serpentine system.
Each part is machined from solid 6061-T6 aluminum and
finished with a maintenance-free clear powder
coat to eliminate the need for polishing.
Features stainless steel rods with chrome moly
ends to keep belt tension perfect. Made in USA.
Important: Sets requires a 1968 or newer balancer
(without v-groove), and a 1969 or newer standard
rotation water pump (4-1/2") and an 11 bolt timing
cover. Keyway type Saginaw p/s pumps were used on 197174 Firebirds, press fit type Saginaw p/s pumps were used on
1975-79 Firebirds.
Note: Serpentine belt not included. No further discounts apply.
Alternator Only Sets Include:
• Crank pulley
• Water pump pulley and nose cover
• Alternator pulley with fan and nose cover
• Alternator bracket with stainless steel tensioner
Power Steering Sets Include:
• Power steering bracket and pulley
• Power steering front and rear mounting brackets
Power Steering Pump Requirements
• Idler pulley with cover
Air Conditioning Sets Include:
• AC clutch cover
• AC front and rear mounting brackets
NO
YES
• Stainless steel tensioning rod
• Dual idlers with covers
• All necessary hardware
All Inclusive Sets Include:
Power
steering
Power
steering
pump
with
• Chrome Tuff Stuff or billet alternator
pump without
bolt hole or stud located
• Chrome Tuff Stuff AC compressor.
hole or stud will
here is required for kits that
• Natural finish Edelbrock water pump.
NOT work.
include power steering.
• Chrome Tuff Stuff or billet PS pump
Alternator Only Set
Note: Set requires a 49" 6 rib serpentine belt.
13100
......................................................................................................................................
Alternator With Power Steering Sets
439.99 set
13105
13110
with keyway type PS pulley ......................................................................................... 689.99 set
with press-fit type PS pulley ......................................................................................... 689.99 set
Alternator With Power Steering And AC Sets
Note: Set requires a 94.5" 6 rib serpentine belt.
13120
13125
with keyway type PS pulley ......................................................................................... 1079.99 set
with press fit type PS pulley ......................................................................................... 1079.99 set
All Inclusive Sets With Alternator And Power Steering
A8700200
A8700201
A8700202
clear powder coated brackets w/chrome accessories.................................................... 986.99 set
clear powder coated brackets w/billet accessories ....................................................... 1181.99 set
black powder coated brackets w/billet accessories....................................................... 1181.99 set
All Inclusive Sets With Alternator Power Steering And AC
Pontiac V-Groove Pulleys
Performance Series pulleys increase horsepower by
reducing accessory drag. 12.5-15 additional h.p. at
the rear wheels is typical. Designed for normal street
driving, these CNC machined pulleys run perfectly
true which eliminates belt throwing. Made of 6061-T6
aluminum for extra strength and wear resistance. Crank
and water pump pulleys measure 6-1/8" in diameter
and alternator pulleys measure 2-11/16" in diameter.
Finished with a “No Polishing” clear powdercoat.
Important: Set requires 1968 or newer dampener, 1969
or newer water pump (4-1/2" long) and an 11 bolt timing
cover. Optional p/s pulley, overdrive crank pulley and
alternator fan sold separately.
Single groove applications
13011 1-groove crank pulley ..............
13012 1-groove water pump pulley....
137
1-groove alt pulley w/cover .....
13010 3-piece pulley set .....................
Double groove applications
137
13030 3-piece pulley set .....................
Triple groove applications
137
13050 3-piece pulley set .....................
Overdrive Crank Pulley
13041 3-groove 8" ..............................
Power Steering Pulley
540
1 groove 6", keyway style .......
Alternator Fan
221
billet .........................................
84.99
99.99
49.99
224.99
ea
ea
ea
set
89.99
99.99
49.99
239.99
ea
ea
ea
set
94.99
99.99
49.99
239.99
ea
ea
ea
set
109.99 ea
72.99 ea
49.99 ea
Note: Set requires a 94.5" 6 rib serpentine belt.
K
A8700203
A8700204
A8700205
clear powder coated brackets w/chrome accessories.................................................... 1894.99 set
clear powder coated brackets w/billet accessories ....................................................... 2075.99 set
black powder coated brackets w/billet accessories....................................................... 2075.99 set
MP3244
1965-00 Braided Power Steering Hoses
MP4182
Sanden AC Compressor Manifold
Custom AC compressor manifold for March
Performance pulley sets with 7176 compressors.
It reroutes the compressor lines downward where
they are less visible and less vulnerable to exhaust
heat. Manifolds are available unfinished, polished,
chrome, or black.
MP4180
MP4181
MP4182
MP4183
424
raw finish..............................
polished ................................
chrome..................................
black .....................................
109.99
124.99
124.99
109.99
ea
ea
ea
ea
These braided stainless steel power steering hose sets
are designed for March Performance pulley sets that
use GM type 2 power steering pumps with a remote
reservoir. Includes three hoses that connect the pump
and reservoir to the steering box. Cut to desired length.
Billet Remote Reservoir
Note: For March pulley sets using GM type 2 steering
pumps only. No further discounts apply.
This billet aluminum power steering reservoir is
designed for March Performance pulley sets that use
GM type 2 power steering pumps. Includes cap and
billet aluminum mounting bracket.
MP450
billet remote reservoir ............ 195.99 ea
Rack & Pinion Steering
MP3211 1974-78 Mustang II .............
MP3244 1979-95 Mustang .................
GM steering Box
MP3222 1965-78 SAE inverted flare .
MP3233 1979-00 metric o-ringed ......
229.99 set
229.99 set
229.99 set
229.99 set
March “Ultra Drive” Front Mount Serpentine Sets
This system has been designed to mount
accessories below the valve covers and
between the width of the heads on small
block Chevrolet engines. Precision CNC
machined from 6061-T6 aluminum
for strength and perfect fit,
hardcoated on high wear areas
and clearcoated to eliminate
polishing in those hard
to reach places to look
great for years to come.
Set is designed to fit
Ram Jet, TPI, Single
and multi carb engines
and includes an oversize
crank pulley that aids in
driving your alternator,
AC and water pump at idle,
where it counts.
Shown With Optional
MP4182 A/C Manifold
Note: Serpentine belts are not
included in any of the sets, however
the belt length is included below for
information purposes. All sets include short reverse water pump.
Power steering hoses and reservoir not included. Shipped overweight.
Available Finishes
black powdercoat finish
chrome finish
Sets Include
• AC Compressor
• 140 Amp Alternator
• Aluminum Reverse Rotation Water Pump
• Spring Loaded Tensioner
• AC, Alternator & Power Steering Brackets
• Crankshaft Pulley
clear powdercoat finish
March “Revolver” Serpentine Sets for Short Water Pump
This serpentine conversion offers the same combination of style and low price as
the popular Style Track alternator, AC and power steering set, but cool Revolver
styling. The styled one piece bracket provides a rigid support for the alternator
and AC compressor; a separate bracket allows the option of power steering or no
power steering. The Revolver uses a unique, easy to use belt tension adjustment
tool. Once the belt tension has been set, the adjustment tool is easily removed and
stowed away until the next time the belt requires adjustment. The Revolver offers
a much cleaner appearance as a result. Includes instructions and hardware. Features
maintenance-free clear, black or black onyx powdercoat or chromed .
Important: No cylinder head accessory holes needed for mounting. Serpentine belt is not
included with any set. Lengths of belts are listed below and are also listed in the instructions.
Power steering hoses and reservoir not included.
• Water Pump Pulley
• Alternator Pulley w/Fan
• Wing Cross Emblem
• A/C Line Fittings
• Grade 8 Mounting Hardware
Serpentine Belt Custom Sets
Non-polished AC compressor and Alternator. Alternator pulley with standard steel
bladed fan.
Chevrolet Small Block Custom Sets
Alternator and AC Only - 61" Serpentine Belt
MP202751
clear powder coat......................................................... 1579.99 set
MP202754
black powder coat ........................................................ 1602.99 set
Alternator, AC and Power Steering Pump - 62" Serpentine Belt
MP202851
MP202854
Serpentine Belt Deluxe Sets
Serpentine Belt Ultra Sets
Chrome AC compressor and Alternator. Tensioner and brackets include the housing
covers. Water pump, alternator and power steering pulleys with nose covers. Alternator
pulley with machined fan includes nose cover.
Chevrolet Small Block Ultra Sets
MP202501
MP202502
chrome ......................................................................... 2559.99 set
MP202504
MP202601
MP202602
chrome ......................................................................... 2924.99 set
MP202604
black onyx
powdercoat finish
black
powdercoat finish
chrome finish
clear
powdercoat finish
Sets Include
• Chrome AC Compressor
• GM Type 2 Power Steering Pump or Chrome
Saginaw Power Steering Pump
• AC, Alternator & Power Steering Brackets
• Power Steering Pulley w/Cover
• Alternator Pulley w/Machined Fan & Nose Cover
Chevrolet Small Block Revolver Serpentine Sets
Alternator and AC Only
w/o Power Steering for 59" Serpentine Belts.
MP211101
clear powder coat......................................................... 1484.99
MP211102
chrome ......................................................................... 1959.99
MP211103
black onyx powder coat .............................................. 1634.99
MP211104
black powder coat ........................................................ 1484.99
Keyway Saginaw Pump & Canister
w/Power Steering for 64" Serpentine Belts.
MP211651
MP211652
chrome ......................................................................... 2259.99
MP211653
black onyx powder coat ............................................... 1949.99
MP211654
Type 2 Power Steering Pump
w/Power Steering for 62" Serpentine Belts.
MP211601
MP211602
chrome ......................................................................... 2294.99
MP211603
black onyx powder coat ............................................... 1949.99
MP211604
set
set
set
set
set
set
set
set
set
set
set
set
425
Chrome A/C compressor and Alternator. Tensioner and brackets include the housing
covers. Alternator pulley with aluminum fan.
Chevrolet Small Block Deluxe Sets
MP202701
MP202704
MP202801
MP202804
Available Finishes
March “Mid Mount” Alternator and Power Steering Serpentine
Conversion Ultra Sets for Long Water Pump
Simple yet exceptionally styled, this
new “Mid Mount” Alternator and
Power Steering serpentine set
for small block Chevrolet
engines offers an exciting
new look! A new higher
mounted power steering
pump bracket helps clear
the steering gear box in
some vehicles. Retains your
standard rotation water pump.
Available with performance pulleys
which increase horsepower or high
water flow ratios pulleys for increased
cooling. CNC machined from solid billet
6061-T6 aluminum for a spectacular machined
finish with perfect fit and extra high strength.
Designed for a great appearance from any angle, these brackets are even machined
on the engine facing side. All billet pulleys and brackets have a “No Polishing”
maintenance-free clear powder coating. Also available black powder coated.
Note: Serpentine Belts are not included with sets. Length of belt is listed below and also
listed in the instructions. All alternator belts are 6 rib. Alternators, power steering pump and
water pump not included. No further discounts apply.
Performance Sets Include
• Crank Shaft Pulley
• Water Pump Pulley w/Cover
• Alternator Pulley w/Fan & Cover
• Alternator Bracket w/Relocation Arm
• Alternator Bracket Adjustment Tool
• Stainless Steel Tensioning Rod
High Water Flow Sets Include
• Chrome Moly Rod Ends
• Power Steering Bracket
Available Finishes
clear powdercoat finish
black powdercoat finish
Small Block Chevrolet Performance Serpentine Ultra Sets
Ultra Set w/o Power Steering
Note: Sets require a 42.5" alternator belt
MP220131
MP220134
clear powder coat............................................................ 399.99 set
black powder coat ........................................................... 399.99 set
Ultra Set w/Power Steering
K
Note: Sets require 42.5" alt belt & 33.5" 5-rib ps belt.
1966-74 Keyway Saginaw Pump & Canister
MP220231 clear powder coat............................................................
MP220234 black powder coat ...........................................................
1978-87 Press Fit Saginaw Pump with Canister
1978-87 Press Fit Saginaw Metric Pump
584.99 set
584.99 set
584.99 set
584.99 set
Ultra Set w/o Power Steering
Note: Sets require a 42.5" alternator belt
clear powder coat............................................................ 399.99 set
black powder coat ........................................................... 399.99 set
Ultra Set w/Power Steering
Note: Sets require 42.5" alternator belt & 33.5" 5-rib power steering belt.
1966-74 Keyway Saginaw Pump & Canister
1978-87 Press Fit Saginaw Pump with Canister
1978-87 Press Fit Saginaw Metric Pump
426
March Performance’s new billet
aluminum Pro-Track serpentine
system for small block
Chevrolet engines features a
1" thick one-piece alternator
and air conditioning
bracket. A separate bracket
allows the option of remote
or canister style power
steering. Adjustment tool is
removable and included. Available
powdercoated in clear, black, black
onyx or chromed.
Note: Serpentine belt is not included with
any set, however length of belt is listed
below and included in the instructions. Power
steering hoses and reservoir not included. Shipped
overweight. No further discounts apply
Sets Include
• Chrome AC Compressor
• AC, Alt. & Power Steering Brackets
• AC Compressor Cover
• Alternator Pulley
w/Machined Fan & Cover
• Power Steering Pulley & Cover
Small Block Chevrolet Pro-Track Serpentine Sets
w/o Power Steering
Serpentine Sets For 59" Belts
MP211151 clear powder coat........................................................... 1584.99
MP211152 chrome ........................................................................... 2084.99
MP211153 black onyx powder coat ................................................. 1734.99
MP211154 black powder coat .......................................................... 1584.99
w/Power Steering
Remote Type Reservoir Power Steering - 62" Belts
MP211202 chrome ........................................................................... 2394.99
MP211204 black powder coat ......................................................... 1894.99
Saginaw Type Reservoir Power Steering - 64" Belts
MP211252 chrome ........................................................................... 2459.99
MP211254 black powder coat .......................................................... 1994.99
set
set
set
set
set
set
set
set
set
set
set
set
Small Block Chevrolet V-Belt Pulley Sets
Performance pulleys can free up to an
additional 12-15 horsepower at the rear wheels
by reducing accessory drag and eliminate beltthrowing. The High Water Flow Ratio V-Belt
pulley sets are designed for daily street driving,
they aid cooling by increasing water flow and fan
MP6090
speed. Both sets are precision CNC machined from 6061T6 aluminum to run perfectly true. Designed for extra strength and finished with
a “No Polishing” clear powder coat. All sets include a crank pulley, water pump
pulley and single groove alternator pulley.
584.99 set
584.99 set
Small Block Chevrolet High Water Flow Serpentine Ultra Sets
MP220431
MP220434
March “Pro-Track” Serpentine Systems
584.99 set
584.99 set
584.99 set
584.99 set
584.99 set
584.99 set
Performance - Short Water Pump
MP6010
1V crank, 1V water pump...............................................
MP6015
MP6030
MP5090
Performance - Long Water Pumps
MP6050
MP6070
MP6090
MP6095
High Flow - Short Water Pumps
MP6110
MP6120
MP6130
MP6140
High Flow - Long Water Pumps
MP6160
MP6170
MP6190
199.99
214.99
224.99
239.99
set
set
set
set
214.99
219.99
224.99
244.99
set
set
set
set
209.99
224.99
229.99
242.99
set
set
set
set
231.99 set
234.99 set
239.99 set
Balancers/Crankshaft Pulleys
1977-92 Replacement
Harmonic Balancers
Replace your worn, damaged
or missing harmonic balancer
with a Genuine GM service
part or a quality reproduction.
1967 Pontiac Harmonic Balancer
This original style two piece balancer replaces all 1967
Pontiac 5-1/2" six bolt V8 balancers. Features dual
timing marks and includes a reinforcement plate, 6
grade eight bolts with washers and a new woodruff key.
N585
1967 2 piece balancer ......... 179.99 ea
1968-79 Harmonic Balancer
Harmonic balancers for
1968-79 Pontiac V8 engines.
Balancers are available in
stock and heavy duty versions.
Heavy duty balancers were
slightly lighter than the stock
version and commonly used
on RA II, RA IV and
A8700168
HO models.
A8700168 stock balancer 7.90 lb ......... 164.99 ea
A8700169 heavy duty balancer 7.65 lb 235.99 ea
SFI Balancers
SFI specification harmonic
balancers are a must for high
RPM engines and required on
most tracks. These small block
Chevrolet balancers have been
38681
tested for two hours at 12,000 RPM to meet or
exceed all SFI specifications. All balancers feature
laser etched degree marks for timing adjustments.
Note: *Has removable weights and works with internally
or externally balanced engines
Internal Balance
38681 6-5/8" x 1-1/2" 283-350 ci ......
38701 6-5/8" x 1-1/2" 350 ci..............
Internal/External Balance
38691* 6-3/4" x 1-3/8" 400 ci..............
38711* 8" x 1-3/8"
400 ci..............
132.99 ea
147.99 ea
132.99 ea
147.99 ea
Harmonic Balancer Covers
Add a custom high
performance look to
your harmonic balancer
by installing this
aftermarket cover. Your
choice of blue, black,
billet, chrome or red.
Available for 6-3/4" and
8" small block Chevrolet
balancers.
Chevrolet Small Block V8
G2127 1977-80 305, 350-L ............. 111.99
G2127 1981-87 5.0 .......................... 111.99
G2127 1988-92 5.0-E ...................... 111.99
Internal Balance
66509* 350ci, 6-3/4" dia. ....................... 64.99
66510 350ci, 6-3/4" dia. ....................... 61.99
66511
small block, 8" dia. ................... 69.99
External Balance
66513 400ci, 8" dia. ............................. 74.99
ea
ea
ea
ea
ea
ea
ea
1977-85 Chrome Crankshaft Pulleys
Dress up your engine with
a chrome crankshaft pulley
from Classic Industries. These
beautiful chrome aftermarket
pulleys are manufactured with
great attention to detail and
are highly polished for a show
quality shine. Applications are
available for small block Chevrolet
engines with long water pump.
T9606
Single Groove Crankshaft Pulley
T9606
1977-85 6.9" dia. ................... 34.99 ea
Double Groove Crankshaft Pulley
T9607
1977-85 6.9" dia. ................... 64.99 ea
Triple Groove Crankshaft Pulley
T9608
1977-85 7.8" dia. ................... 69.99 ea
1985-97 JET Underdrive Pulley Set
The JET Underdrive Pulley Set
reclaims lost horsepower and
mileage by reducing
the drag placed on
the engine to drive
the accessories such
JT90140
as the air conditioning,
power steering and water pump. Kits include pulleys,
hardware, complete instructions and part number
for new serpentine belt (most kits will require use of
smaller size belt).
Important: Belt is not included with kit. Number and type
of pulleys will vary per application.
Note:* Includes 2 pulleys.
JT90106* 1985-87 350 TPI.................. 159.99 set
JT90108* 1985-95 3.4L ...................... 129.99 set
JT90107* 1988-92 350 TPI.................. 169.99 set
JT90140* 1993-97 350 LT1 ................. 304.99 set
chrome
blue
6-3/4" diameter......................... 29.99 ea
8" diameter ............................... 29.99 ea
66514
Harmonic Balancer Tools
Harmonic balancer tools for Chevrolet, Ford and
Chrysler engines. Choose from a heavy duty tool
with roller thrust bearings and 7/16"-20, 5/8"-18, and
3/4"-16 adapters and various removal hardware. or a
standard duty tool for easy installation and removal
of the harmonic balancer.
66515 standard, install only ................. 29.99 ea
66514 professional, removal/install ..... 79.99 set
1967-81 Crankshaft
Balancer Hardware
A8700170
Reproduction and original GM hardware for
mounting the crankshaft pulley & harmonic balancer.
Crankshaft Pulley Bolt Set
TA4023
1977-79 Olds 403 .................. 6.99 set
A8700172 1967-79 Pontiac V8 ............... 8.99 set
Crankshaft Pulley Reinforcement/Spacer
TA4022
1977-79 Olds 403 .................. 9.99 ea
A8700171 1967-72 Pontiac V8 ............... 7.99 ea
Crankshaft Keys
G9283
1977-81 Chevy SB, 3/16"x3/4" .99 ea
TA4025
1977-79 Olds 403 .................. 5.99 ea
Harmonic Balancer Bolt
G5886
1977-81 Chevy SB ................. 3.99 ea
Harmonic Balancer Washer
G9287
1977-81 Chevy SB ................. 4.99 ea
Harmonic Balancer Bolt & Washer Set
TA4024
1977-79 Olds 403 .................. 14.99 ea
A8700170 1967-79 Pontiac V8 ............... 11.99 set
F12364
1969-86 Reproduction Crankshaft Pulleys
Replace the damaged or missing original crankshaft
pulley on your small block or Pontiac engine with one
of our fine reproductions. Our reproduction pulleys
are manufactured with great attention to detail and
feature correct markings as original. Applications are
available for small block Chevy and Pontiac engines.
Note: *Except 63A or 80A alternator. K1055 is a
reconditioned GM pulley.
Chevrolet Engines
Double Groove w/o AC, 6-7/8" Diameter
K1055
1976-78 305, 350-L, .......... 94.99
K1055*
1979
305, 350-L ........... 94.99
K1055
1981
267, 305-H, ......... 94.99
K1055
1982-85 305-H w/42A alt.. 94.99
Triple Groove w/AC, 7-11/16" Diameter
3972180
1977-86 ............................. 79.99
Pontiac V8 Engines
Single Groove w/o AC/PS, 7-1/4" Diameter
GM# 9790947YD
F12364
1969-70 exc. RA5 ............. 74.99
Single Groove w/AC 7-1/16" Diameter
GM# 480509XS
A8700120 1970-75 ............................. 39.99
Double Groove w/o AC w/PS, 7-1/4" Diameter
GM# 9790846YA
A8700121 1968-70 350-400 ............... 59.99
Double Groove w/AC, 7-3/16" Diameter
GM# 480508XR
A8700122 1970
............................. 69.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
G7193
1977-02 GM Crankshaft Pulleys
Replace the damaged or missing original crankshaft
pulley on your small block Chevy engine with a
Genuine GM service part.
Triple Groove Crankshaft Pulley
G7193 1977-86 small block ................ 47.99 ea
Serpentine Belt Pulley
G3567 1987-92 w/o turbo............... 59.99 ea
G3567 1993-95 3.4-L .................... 59.99 ea
G3878 1995-96 3.8-L w/MT .......... 232.99 ea
G3878 1995-97 3.8-L w/AT............ 232.99 ea
G3569 1988-92 V8 w/serp belt ...... 41.99 ea
G3887 1993-97 V8 ......................... 277.99 ea
G3888 1998-02 V8 ......................... 73.99 ea
Warning Concerning Crankshaft Pulleys
Stock replacement, aftermarket stamped steel or
cast iron pulleys are not designed to exceed 400
horsepower or 6000 RPM. Using reproduction
pulleys on engines in excess of these limits may result
in catastophic disintegration of the pulley causing
severe damage to the engine, cooling system and
body parts. Classic Industries® assumes no liability
for damages caused by improper usage of pulleys.
Please be sure to install the pulley properly to avoid
damages that could occur from improper installation
or exceeding the recommended RPM limitations.
Harmonic Balancers/Crankshaft Pulleys
427
Note: Please specify color when ordering.
66517
66518
G2127
Note: *Center timing mark
Engine Timing Components
1977-95 Accu-Drive®
Camshaft Gear Drives
The Accu-Drive® camshaft
gear drive kit replaces a
stock timing chain with
a precision gear drive
system. The gear drive can
be easily installed. Just
replace the stock crank and
camshaft sprockets with
Accu-Drive® gears and
slip in the idler assembly.
Most Accu-drives require
no modifications to the engine
block, although some fitting
of the axles and front cover may
be required. The Accu-Drive® gear
system transmits power from the crankshaft gear
to a full floating main idler gear which drives the
camshaft gear. A unique feature of the Edelbrock
Accu-Drive® system is the ability of the main idler
gear to float to an optimum position between the
crankshaft and camshaft gears.
G8314
1977-92 GM Camshaft Timing Gears
1977-86 SB Chevy Timing Cover
OEM factory small block Chevy replacement camshaft
timing gears. Excellent GM replacements for use
when rebuilding an existing engine or replacing a
broken original!
36-Tooth Iron Camshaft Timing Gears
G8314 1977-86 350 - early link ........ 71.99 ea
G8314 1977-81 305h ......................... 71.99 ea
38-Tooth Iron Camshaft Timing Gears
G8317 1990-92 350HO ZZ1 2nd des 78.99 ea
The sturdy two piece billet timing cover allows the
camshaft to be serviced without disturbing the oil pan
seal. The cover is machined from high grade billet
aluminum and is compatible with almost all water pumps
and gear drives. Includes roller cam button, cam plate,
shims, a timing pointer, hardware and instructions.
Important: Not for use on stock Chevy hydraulic rollerlifter cam equipped engines. Accu-Drive® gears are not
recommended for use above 7000 RPM or on computer
controlled vehicles with knock sensors. On some late model
small block engines, it will be necessary to check clearance
behind the cam gear at the engine block at the 12 o’clock
position. Make sure gear clears oil galley bosses on block
when in the most rearward position. Grind or machine
block for clearance.
E7890
1977-95 Chevy small block .. 191.99 set
21101
1977-86 SB timing cover set .. 269.99 set
E4240
1977-86 Aluminum Timing Covers
1977-80 Timing Chain and Gear Sets
A complete, single-row, link-type timing chain and
gear set to fully replace your originals. Includes a
new timing chain, camshaft gear and crankshaft gear.
TC499S 1977-80 Chevy small block . 19.99 set
G8325
Edelbrock die-cast polished timing covers come with
pan seal, allen head bolts, gaskets, and washers. These
timing covers are a great way to dress up any Chevy
engine. Complete the look with Edelbrock valve
covers, and air cleaners.
E4240
1977-86 Chevy small block ... 89.99 ea
K
1977-02 Chevrolet Timing Chains
When it comes to quality, you can’t beat genuine GM
parts. The timing chains offered here are original GM all
the way! If you’re restoring a Firebird, or simply need
to replace your timing chain, make sure the replacement
is manufactured with the quality your Firebird deserves.
These timing chain listings are for Chevrolet engines that
were factory installed in Firebird models, or replacement
engines of the same designation.
Chevy Engines
G8325 1980
229 V6 ..................... 68.99 ea
G8325 1977-81 267, 305, 350-L ....... 68.99 ea
G8325 1982
305-H, 5.0-7 ............ 68.99 ea
G8325 1983
5.0-S, 305-H ............ 68.99 ea
G8325 1984
305-G, 305-H .......... 68.99 ea
G8325 1985-86 305-G, 305-H, 5.0-F 68.99 ea
G8325 1987
305-H, 5.0-F, 5.7-8 .. 68.99 ea
G8325 1988-92 5.0-E, 5.0-F, 5.7-8 ... 68.99 ea
LT1 Chevy
G8327 1993-97 5.7-P ........................ 53.99 ea
LS1 Chevy
G8327 1998-02 5.7-G........................ 53.99 ea
1977-92 GM Crankshaft Timing Gear
Genuine GM crankshaft timing gears. Get it right the
first time when rebuilding your existing engine or
replacing damaged originals with these high quality
crankshaft timing gears.
18-Tooth Small Block Chevy Timing Gears
G8318 1977-86 350 ........................... 48.99 ea
G8318 1977-81 305 ........................... 48.99 ea
G8318 1990-92 350HO, ZZ1 2nd des 48.99 ea
428
51100
Small Block Chevy Timing Belt System
Get more performance out of your small block with
these Magnum timing belt systems! These systems
absorb crankshaft harmonics. The Magnum belt drive
system is ideal for street performance and budget-minded
race applications.
Note: Minor block modification may
be required. No further discounts apply.
Dry Timing Belt System
This system is more durable and more accurate than
traditional timing chains or aftermarket gear drive
systems, especially at high RPM. Make quick timing
modifications at the track without the hassle of removing
a timing chain cover! Includes main plate, gears, belt,
shims, mounting hardware, and instructions.
61100
dry timing belt system ............ 574.99 set
61100B replacement timing belt .......... 59.99 set
Wet Timing Belt System
This system keeps the timing accurate with virtually
no fluctuation. It is also more durable than traditional
timing chains or aftermarket gear drive systems,
especially at high RPM. Designed to work with billet
timing cover #21101 but works with most late model
flat covers. Includes upper and lower timing gears, belt,
cam timing bushings, shims, cam button, mounting
hardware and instructions.
51100
wet timing belt system ........... 409.99 set
51100B replacement timing belt .......... 74.99 ea
Chevy Engine Timing Components
1969-79 Pontiac Timing Cover
Reproduction of the timing cover which will replace
the original cover for the applications below. These
cast aluminum covers are what the factory designed
to cover the timing chain. The water pump is also
connected to the front of this unit.
N538
1969-74 V8 w/o 307 ............ 189.99 ea
N538
1975
V8 w/cast mark ..... 189.99 ea
N538
1976-77 350P, 400, 455 ....... 189.99 ea
N538
1978-79 400 WC, X7........... 189.99 ea
G5742
1985-02 Timing Cover
Correct replacement for the original front crankcase
cover. Be sure to replace the cover gasket when
purchasing the timing cover.
G5742 1985-86 5.0-F ...................... 53.99 ea
G5742 1987-92 V8 .......................... 53.99 ea
G12914 1998-02 5.7L, LS1 & LS6 ... 99.99 ea
Timing Components
1969-79 Timing Cover Alignment Sleeves
Reproduction of the original timimg chain cover sleeves
for use on 1969-79 Pontiac models. These sleeves are
used to align the timing chain cover to block positioning
and crankshaft seal alignment.
F190
1969-79 .................................... 7.99 pr
Timing Cover Gasket Sets
Correct replacements for 305-350 small block Chevrolet
applications. Sets include the timing cover seals
T4364
Chevy small block ..................
9.99 set
1977-79 Trans Am Timing Chain Cover Bolt
Oldsmobile 403 engine water pump and timing chain
cover bolt set. Used to hold on the timing chain cover,
water pump and timing mark bracket.
TA4009 1977-79 Olds 403 .................. 27.99 set
1256653
A- Arrowhead
C- Flames
B- GT logo
1978-97 Timing Cover Bolt Sets
Dress up your Firebird with these one-of-a kind dressup bolt sets. The Pontiac Arrowhead, GT or flames logo
is stamped directly onto the head of the bolts. They
are available in decorative chrome plated or polished
stainless steel versions. What better way to make a
statement than with these unique bolts?
1256654
1977-82 OE Style Reproduction Timing Tabs
1964-79 Timing Cover Lock And Bolt
This fastener set connects the intake manifold to the
timing chain cover on 1964-79 Pontiac V8 engines.
These bolts feature correct markings and black zinc
finish on the bolt and include special lock washer with
the correct silver zinc finish.
A8700173 1964-79 ................................ 7.99 set
Help to keep your engines timing at the correct mark
by utilizing these reproductions of the original timing
tabs. For Chevrolet small block applications.
Reproduction
1256653 1977-80 8" balancer .............. 9.99 ea
1256654 1977-82 350 w/o hi perf. ....... 8.99 ea
GM
G8332 1977-82 350 w/o hi perf. ....... 5.99 ea
Note: Must specify logo prefix A-Arrowhead, B-GT logo,
C-Flames.
Chrome
56464C 1978-87
56400C 1993-97
Stainless Steel
56464S 1978-87
56400S 1993-97
Chevy small block ... 19.99 set
LT-1 ........................ 19.99 set
Chevy small block ... 9.99 set
LT-1 ........................ 19.99 set
AR4151
T4960
1989-02 Camshaft Gear Dowel Pin
Factory original replacement camshaft gear dowel pin.
Fits 1989-02 5.0-5.7 liter engines.
G8323 1989-92 5.0-E, 5.0-F, 5.7-8 ....... 4.99 ea
G8323 1993-97 5.7-P............................ 4.99 ea
G8323 1998-02 5.7-G ........................... 4.99 ea
Timing Cover Bolt Sets
Chrome Timing Tabs
These aftermarket tabs are a great replacement
because they’re chrome! Install timing tabs and add
detail to your restoration. For Chevrolet small block
applications.
T4960
small block 6"-7"-8"................. 4.99 ea
T9178
small block w/pointer 7" .......... 7.99 ea
T9179
small block w/pointer 8" .......... 7.99 ea
1987-97 Camshaft Gear Bolt
Factory original replacement camshaft gear bolt.
5/16"-18 x 3/4"
G8324 1987
305-H, 5.0-F (export)... 2.99 ea
G8324 1990-92 5.0-F, 5.7-8................... 2.99 ea
G8324 1993-97 5.7-P............................. 2.99 ea
1977-79 Trans Am Timing Mark Bracket
Engine crank timing mark bracket for 1977-79 Pontiac
Trans Am models with 403ci Oldsmobile V8 engine.
Features all correct mounting points as original.
TA4010 1977-79 ................................... 16.99 ea
A8700174
1964-79 Timing Chain Cover Bolts
Correct timing chain fasteners for 1964-79 Pontiac
engines. Bolts feature correct markings and finish and
include washers. Stud sets include washers and nuts.
A8700174
1964-79 upper bolts ....... 11.99 set
A8700175
1964-79 lower bolts ....... 11.99 set
A8700176
1967-79 studs ................. 14.99 set
1977-79 Trans Am Engine Oil Slinger
Chrome Timing Tabs
Reproduction timing chain gear oil slinger for the
1977-79 Trans Am's Oldsmobile 403 engine.
TA4004 1977-79 Olds 403 .................. 21.99 ea
Officially licensed chrome timing tabs for use on
Chevrolet small block applications.
D141202
small block w/8" balancer .... 5.99 ea
Timing Components
429
ARP’s timing cover bolts are available in both polished
stainless steel or black oxide finish chrome moly. You
can choose between standard hex head bolts or compact
12-point fasteners.
Chevrolet Engine
AR2152 black oxide hex head ............ 11.99 set
AR2151 black oxide 12-point ............ 11.99 set
AR4152 stainless
hex head ............ 18.99 set
AR4151 stainless
12-point ............ 18.99 set
Pontiac Engine
AR19151 black oxide 12-point ............ 29.99 set
AR49152 stainless
hex head ............ 51.99 set
AR49151 stainless
12-point ............ 54.99 set
T9178
Shaker Hood/Ram Air Parts
F12345
A8700137
1967-68 Firebird Ram Air System
Correct reproduction of the factory Ram Air induction
system. This six piece kit includes the major
components needed to install a Ram Air system on
1967-68 models with a Ram Air Firebird 400 hood.
• Upper Hood Pan
• Upper Foam Seal
• Lower Carburetor Pan
• Lower Foam Seal
• Die Cast Ram Air Scoops • Air Cleaner Lid
F12336
1967-69 Ram Air Hood Pan
1970-76 T/A Shaker Hood Scoop
Reproduction of the Ram Air hood pan for 1969 Firebird
models. This pan is manufactured from E-coated die
stamped steel or fiberglass. This pan mounts to the
hood. For models with Ram Air
Steel
F12336 1967-68 ................................ 279.99 ea
F12337 1969
upper ....................... 493.99 ea
F12345 1969
lower ....................... 349.99 ea
Fiberglass
EB6533 1967-68 ................................ 201.99 ea
EB6534 1969
upper ....................... 201.99 ea
Reproduction hood scoop assembly for 1970-76
Pontiac Trans Am models with the optional Shaker
intake. Manufactured from fiberglass as original and
includes the flapper and all necessary components for
a functional Shaker system.
F10198 1970-76 complete ............... 299.99 ea
A8700137 1967-68 Ram Air system ... 839.99 kit
F10191
1969 Firebird Ram Air System
1977-81 T/A Shaker Hood Scoop/Base
Correct reproduction Ram Air induction system for
1969 Firebird models. This 18-piece kit includes the
major components required to install a Ram Air system
on models with Firebird 400 hood.
F12348
Note: Will not fit Trans Am models.
•
•
•
•
•
•
•
•
Upper Ram Air Pan
Pan Heat Actuators
Ram Air Flapper Door
Upper Cable
Connector Block
Connector Bracket
Lower Cable & Knob
Lower Cable Bracket
•
•
•
•
•
•
•
•
Cable Bracket Decal
Die Cast Hood Scoops
Foam Pan Seals
Lower Air Pan
Spark Arrestor Screen
Filter Retaining Ring
Air Filter
Pan Stud kit
A8700138 1969 Ram Air system ..... 1964.99 kit
1967-69 Hood Pan Seals
Correct reproduction seals which seal the Ram Air
system. For use on 1967-69 models with Ram Air.
Upper Rubber
F12338 1967-68 .................................. 66.99 ea
F12348 1969 ........................................ 62.99 ea
Lower Foam
F12339 1967-68 .................................. 44.99 ea
F12340 1969 ........................................ 66.99 ea
Reproduction hood scoop and base for 1977-81 Pontiac
Trans Am models with the optional Shaker intake. The
scoop is manufactured from fiberglass, as original,
while the base is manufactured from steel. Will work
with 301, 400 and 403 Pontiac engines. Bases include
attaching ring. Scoop to hood seal sold separately.
F10191 1977-81 scoop ...................... 199.99 ea
F10192 1977-81 301 base ................. 99.99 ea
F10193 1977-81 400 base ................. 99.99 ea
F10194 1977-81 403 base ................. 99.99 ea
F10195 1977-81 scoop & 301 base .. 269.99 set
F10196 1977-81 scoop & 400 base .. 269.99 set
F10197 1977-81 scoop & 403 base .. 269.99 set
1969 Trans Am Ram Air System
Install a Ram Air system on your 1969 Trans Am!
This was a rare option for Trans Am and parts were
almost impossible to find, until now. This kit includes
the major components required to install the rare Trans
Am Ram Air system on your vehicle.
•
•
•
•
Upper Ram Air Pan
Pan Heat Actuators
Lower Carburetor Pan
Upper Foam Seal Upper
Carburetor Pan Foam Seal
underside
PP100
• Upper Pan Filter
Retaining Ring
• Air Filter
• Spark Arrestor Screen
• Pan Stud Kit
F12349
K
1973-81 Functional Shaker Conversion
F12325
A8700139 1969 TA Ram Air System 1424.99 ea
1969-75 Ram Air Pan Actuator Assembly
EB6853
Reproduction of the Ram Air actuator assemblies for
use on models with Ram Air. These actuators rivet to
the underside of the Ram Air pan and vacuum lines
attach close to eliminate outside air to the carburetor.
Complete Assembly
F12349 1969
LH ............................ 112.99 ea
F12350 1969
RH ............................ 112.99 ea
Diaphragm and Bracket
F12325 1969
T/A w/Ram Air......... 23.99 ea
F12325 1970-75 Formula air cleaners . 23.99 ea
1967-68 Ram Air Carburetor Pan
Replacement of the Ram Air Carburetor Pan. Originally
installed on 1967-68 Firebird models with Ram Air.
Available with either an E-coated die stamped steel
or fiberglass base
Steel
F12344 base only ............................... 275.99 ea
Fiberglass
EB6853 base and lid ........................... 219.99 set
430
1970-81 Shaker Flap Seal
Reproduction shaker flap seal for 1970-81 models. This
rubber item seals the flap on the shaker hood scoop.
Designed to replace the original exactly.
E201
1970-81 scoop edge ............... 6.99 ea
Functional shaker hood scoops were only available
on 1970-72 Trans Am models. These highly desirable
scoops open to allow air in for improved performance,
and close to keep the outside elements out. This is an
easy do-it-yourself conversion kit that wires directly
to your fuse box so the flap opens when the engine
is started. The 1973-76 shaker kit closely resembles
the early 1970-72 factory components. Actual hood
scoop not included with kit.
Note: Please provide year and engine size when ordering.
(Pontiac 400, Olds 403, 4.9 or 5.0). Some of the 4.9 shakers
may need additional modification for this kit to fit. All 1973 and
1974 Trans Ams with TH400 trans do not need the kickdown
switches. To ensure correctness for 1977, measure hood scoop
from top to base, 3"-short or 3.5"-tall.
* tall scoop, ** short scoop.
Standard Kit (w/o throttle switch)
PP100
1973-76 400/455 Pontiac ...... 169.99
PP101** 1977
400 Pontiac ............. 169.99
PP102** 1977
403 Olds ................. 169.99
PP103* 1977-81 400 Pontiac ............. 169.99
PP104* 1977-81 403 Olds ................. 169.99
PP105* 1977-81 4.9 Pontiac .............. 169.99
PP106* 1977-81 5.0 Chevrolet .......... 169.99
ea
ea
ea
ea
ea
ea
ea
1969 Cable Connector Bracket
1977-81 T/A Shaker Scoop Drain Hose
Reproduction hood scoop drain hose for 1977-81
Pontiac Trans Am models with the optional Shaker
hood intake. Manufactured with correct molded bends
as original, this hose runs from the base of the scoop
down in front of the water pump to drain moisture.
Hose clamp included.
15241
1977-81 ................................... 14.99 ea
This bracket connects the upper and lower cables
together in the Ram Air pan. Works on 400 hoods
with Ram Air I.
F12354 1969......................................... 15.99 ea
F12343
1969 Trans Am Ram Air Hood Tubes
Reproduction of the Ram Air hood tubes for use on
1969 Trans Am models with Ram Air. These tubes
mount on the underside of the hood and go from the
Ram Air scoops to the Ram Air pan which direct air
into the lower pan.
Note: *Does not fit reproduction hoods.
1970-72 Shaker Scoop Throttle Solenoid
F12343 1969
EB6540* 1969
Ram Air hood tubes .... 166.99 pr
RH heavy duty ............ 197.99 ea
1969 Upper Air Filter Retaining Ring
Reproduction of the upper air filter retaining ring for
use on 1969 models with Ram Air. Most people don’t
realize the air filter mounts up in the hood pan. This
is the retaining ring that screws the upper pan to hold
the air filter up to the pan.
F12346 1969......................................... 42.99 ea
Correct reproduction of the original shaker scoop
solenoid assembly which allows the hood valve assembly
to open and shut when the accelerator is depressed.
C685
1970-72 ................................... 38.99 ea
F12352
1969 Ram Air Cables
K7970
1970-72 Trans Am Throttle Switch
Reproduction throttle switch assembly for 1970-72
Trans Am models. The throttle switch assembly mounts
on the carburetor. It signals the flapper door on the
Trans Am scoop to open and close.
KW176 1970-72 switch only ............ 21.99 ea
K7970
1970-72 switch w/brackets .. 104.99 ea
A9700101 1970-72 switch retainer ....... 3.99 ea
Reproduction of the upper Ram Air cable for use on
1969 models with 400 hood. The upper cable goes
from the flapper door to the Ram Air pans. The lower
cable goes from the Ram Air pan to the inside of the
car and connects to to the cable support bracket and
features a chrome knob.
F12351 1969
upper ........................ 36.99 ea
F12352 1969
lower ........................ 41.99 ea
FL120
F70765
1970-75 Ram Air Rubber Boots
These are correct reproductions of the rubber boots
that go from the air cleaner to the hood on all 1970-75
Formula Firebird models with Ram Air. The boots were
retained to the underside of the hood with a specialized
retainer plate. One pair of each required per vehicle.
FL120
1970-75 rubber boots ........... 64.99 pr
F70765 1970-75 retainer ................... 29.99 ea
1969 Inner Cable Support Bracket
F12342
1976-79 Shaker Scoop Retainer Ring
Ring that secures the shaker scoop to the air cleaner
assembly. This reproduction ring will replace the
original exactly. For use on all 1976-79 models with
shaker hoods.
10004184 1976-79 ............................. 39.99 ea
1969 Ram Air Decal
This decal is located under the
dash and mounts to the inner cable
support bracket.
F12356 1969
Ram Air decal ..........
4.99 ea
1969 Spark Arrestor Screen
Correct flame spark arrestor
for 1969 Firebird and
Trans Am models
equipped with Ram Air
III or Ram Air IV. Sits on
top of the carburetor to
keep debris out of the carb
when the hood is up, and help
prevent an underhood fire in the
event of a backfire.
F12394
1969 ......................................
1969 Cable Connector Block
84.99 ea
Replace your missing or damaged connector block
with this quality reproduction. This block connects
the upper and lower Ram Air cables together. Works
on 400 hoods with Ram Air I.
F12353 1969
connector block ....... 15.99 ea
1977-81 Shaker Scoop to Hood Seal
Correct reproduction rubber seal which seals the scoop
to the underside of the hood. Comes complete with
attaching clips.
10012875 1977-81 scoop to hood ......... 39.99 ea
431
1967-69 Ram Air Pan Air Filter
Replacement air filter for use on 1967-69 models with
Ram Air. This is the correct size air filter that fits in
the Ram Air pan.
F12341 1967-69 lower ..................... 13.99 ea
F12342 1967-69 upper ..................... 23.99 ea
This bracket mounts to the lower dash and positions
the cable in location to actuate Ram Air. Works on
400 hoods with Ram Air I.
F12355 1969
support bracket ........ 74.99 ea
Replacement Air Cleaners
T2286
1967-81 Open Element Air Cleaner
PY4202
1967 Chrome Louvered Air Cleaner
This style of air cleaner was part of the chrome dress
option for 1967 Firebird 400 models. These assemblies
include a low profile chrome louvered lid, a pancake
style filter element, and a baseplate. Available for
both Quadrajet and AFB carburetor models. Lids and
baseplates are also available separately.
1970-73 Ram Air IV Air Cleaner
Reproduction dual snorkel air cleaner with one heat
stove diaphragm valve for 1970-73 Trans Am with
Ram Air IV, HO 400 or 455 engine. Features correct
domed air cleaner lid. Air filter element is not included.
F12380 1970-73 Ram Air IV............... 317.99 ea
F12380 1970-73 HO 400/455.............. 317.99 ea
Replacement 6" tall air cleaner assembly which
includes the base, element, and chrome plated lid.
Excellent replacement for open element type air
cleaner. Includes knockout provided for smog tube.
Great inexpensive replacement with super looks!
Although this air cleaner is not original, it gives a
custom look many enthusiasts desire.
Note: Fits 5-1/8" neck. This air cleaner assembly is not for
use with Ram-Air.
T2286
T2287
1967-81 14" dia ..................... 44.99 ea
1967-81 14" x 6" element ...... 18.99 ea
Note: *Will not work with Edelbrock carburetors.
Assemblies
PY4201* 1967 AFB assembly ............. 174.99 ea
PY4202 1967 Quadrajet assembly ..... 174.99 ea
Individual Components
PY4213 1967 louvered lid ................. 109.99 ea
PY4214* 1967 AFB baseplate ............. 59.99 ea
PY4215 1967 Quadrajet baseplate ..... 59.99 ea
F70752
1970-75 Formula Dual Snorkel Air Cleaner
This quality reproduction dual snorkel air cleaner is
just what you need to bring your 1970-75 Formula
engine compartment back to its original appearance.
This air cleaner housing is designed to function with
all 1970-75 Formula dual scoop hoods.
F70752 1970-75 Formula ................. 429.99 ea
CB1007 1970-75 rubber seal ............. 14.99 ea
Chrome Air Cleaner
Replacement air cleaner including chrome lid. This
9" air cleaner fits all with 5-1/8" necks. For 4-7/32"
necks must use 66315 adapter.
66815
9" dia ........................................ 14.99 ea
66315
4-7/32" neck adapter ................ 7.99 ea
1970 Ram Air III Air Cleaner
K
Reproduction single snorkel air cleaner for 1970
Trans Am with Ram Air III 400 engine. A one year
only air cleaner set up to accept the functional hood
scoop. Features correct domed air cleaner lid. Air filter
element is not included.
F12378 1970 Ram Air III .............. 317.99 ea
KW462
66801
KW461
1967-74 Dual Snorkel Air Cleaner Lid
A reproduction of the hard to find 17" 4 bbl. dual
snorkel air cleaner lid in chrome or black finish. Each
lid is manufactured using the correct configuration for a
show quality appearance! These lids are sure to please
even the most discriminating restorer or show judge!
This lid also includes a correct lid to base rubber seal
which is pre-attached to the lid.
KW462 1967-74 black ........................ 42.99 ea
KW461 1967-74 chrome ..................... 54.99 ea
66802
Deluxe Chrome Tri-Star Air Cleaners
Each air cleaner is open element style and includes a
tri-star wing nut on top. Available in 4 separate sizes.
Includes quality chrome plating for an authentic
appearance and long lasting dependability.
Air Cleaner for 5-1/8" and 4-7/32" Necks
66801
14" dia, w/Tri-star nut .............. 29.99 ea
66802
10" dia, w/Tri-star nut .............. 19.99 ea
66803
6-3/8" dia, w/Tri-star nut .......... 16.99 ea
Air Cleaner for 2", 2-5/16" and 2-5/8" Necks
66816
4" dia, w/Tri-star nut ................ 14.99 ea
Element
T2110
element for 66801 .................... 10.99 ea
1970-73 Ram Air III Air Cleaner
Reproduction dual snorkel air cleaner with one heat
stove diaphragm valve for 1970-73 Trans Am with
Ram Air III, HO 400 or 455 engine. Features correct
domed air cleaner lid. Air filter element is not included.
F12379 1970-73 Ram Air III .......... 317.99 ea
F12379 1970-73 HO 400/455......... 317.99 ea
432
1970-76 Shaker Air Cleaner Lid
Low Profile Chrome Air Cleaner
Reproduction "Shaker" domed air cleaner lid for
1970-76 Pontiac Trans-Am models. Features correct
dome. Filter element not included and sold separately.
F12386 1970-76 14" dia ..................... 43.99 ea
Aftermarket replacement air cleaner designed for
anyone who wants a low profile appearance. Includes a
triple chrome plated lid. Open element style air cleaner.
66804
14" dia, fits 5-1/8" neck............ 34.99 ea
53391
158241
154241
141691
141690
Super-Light 14" Air Cleaners
Save critical front-end pounds! In a black or clear
anodized finish, plus a 3" tall genuine AC filter, a colormatched, super-deep aluminum base for maximum
hood clearance when using optional, extra-tall air
filter elements. Supplied with necessary mounting
hardware and center nuts.
141690 black aluminum ........................ 69.99 ea
141691 clear anodized aluminum ......... 69.99 ea
153241
158240
52391
Aluminum Street Scoops
154240
153240
Streamline Series Air Cleaners
These billet aluminum air cleaners are machined for
style, featuring a mirror polished billet strip on top with
integrated wing nut. Designed to fit standard four barrel
carburetors, each air cleaner includes stainless steel
hardware and detailed instructions. Choose from three
designs, available in your choice of satin black powder
coat or bead blasted and ready for paint. Made in USA.
215650
Note: Not for use with Dominator carburetors. No further
discounts apply.
215840
Ribbed Billet Air Cleaners
These precision machined air cleaners are a product of
progression and styling. Manufactured from machined
billet aluminum with a mirror polished finish, each
air cleaner includes a K&N filter, stainless steel
mounting hardware and detailed instructions. Available
in a 14" round version or a dual quad configuration
with adjustable base plate to allow for variations in
carburetor spacing. Made in USA.
Ready To Finish
158241 14" air cleaner ........................
154241 large oval air cleaner ..............
153241 small oval air cleaner .............
Black
158240 14" round air cleaner ..............
154240 large oval air cleaner ..............
153240 small oval air cleaner .............
249.99 ea
199.99 ea
179.99 ea
249.99 ea
199.99 ea
179.99 ea
52331
Full Sized Street Scoops
These full sized aluminum street scoops add an
aggressive performance look to any custom street or
show car engine. These finned and polished scoops
measure 20" long by 5" tall and are available for both
dual or single quad applications, fitting carburetors with
a 5-1/8" neck. Scoops include all necessary mounting
hardware and 6-3/8" x 2-1/2" paper element air filters.
52351
single quad scoop ................... 168.99 ea
52331
dual quad scoop ...................... 163.99 ea
Note: Not for use with Dominator
carburetors. No further discounts apply.
215840
215650
These aluminum street scoops add an old-school
performance look to almost any engine, especially if
it has a tunnel ram or dual carburetors. Each 20" scoop
is made from polished cast aluminum with three fullyfunctional reversible round butterflies. Designed for
carburetors with a 5-1/8" neck and comes with both dual
and single carburetor mounting plates, 6-3/8" x 2-1/2"
paper element air filters, hardware and instructions.
53391
smooth housing scoop ............ 263.99 set
52391
ribbed housing scoop ............. 257.99 set
14" dia round air cleaner ........ 649.99 ea
oval dual quad air cleaner ...... 279.99 ea
E1207
E1223
E41173
E4117
Edelbrock Classic Series Air Cleaners
Available in either classic polished aluminum or
durable black powder coat finish and includes a 3"
medical grade, pre-oiled cotton gauze element for
excellent filtration. These air cleaners work with all
popular 5-1/8" necks, for all carburetors or throttle
bodies. Overall height is 3.9".
E4117
E41173
polished finished .................... 199.99 ea
black finish ............................. 144.99 ea
Top off your engine with a good looking Pro-Flo air
cleaner. The Edelbrock signature and styling coordinate
beautifully with Edelbrock Signature Series valve
covers. These air cleaners are stamped from 18 gauge
steel and triple chrome plated for a high quality finish
and good looks. They’ll work with all popular 5-1/8"
diameter carburetor necks. Important: Use E1121 with
all Edelbrock square bore carburetors and Q-jets.
Round 14" diameter w/3" element
E1207 chrome w/logo ...........................
E1121 chrome w/logo, low profile ........
E1223 black w/logo, low profile ...........
E1208 chrome with logo .......................
E1203 black powder coat w/logo ..........
Triangular w/2-1/2" washable element
52451
52461
29.99 ea
31.99 ea
31.99 ea
21.99 ea
24.99 ea
29.99 ea
99.99 ea
Mini Street Scoops
Give any engine the look of sheer horsepower with
these beautiful aluminum mini street scoops. Designed
for single quad carburetors with a 5-1/8" neck. These
aluminum scoops measure 13-1/2" long and 4-1/2"
tall, and are available with finned or smooth polished
finishes. Ready to bolt on with all necessary hardware
and a 6-3/8" x 2-1/2" paper element air filter.
52451
smooth scoop......................... 114.99 ea
52461
finned scoop .......................... 124.99 ea
433
Signature Series Air Cleaners
PERFORMANCE FILTERS
Air Filter Element For OEM Air Cleaner
601290
K&N 14" Low Profile Chrome Air Cleaner
This air cleaner provides a low profile fit by dropping the
filter 7/8" or 1-1/4" below the carburetor flange. 5-1/8"
flange fits all popular 4-barrel carburetors. Your choice
of 4 element heights are offered to fit a wide variety of
applications. Note that the 7/8" drop will fit carburetors
with electric choke mechanisms. Optional vent kit,
item # 851190 is available and sold separately. Total
height listed below is the minimum clearance needed
above the carburetor flange. Important: *Items marked
with asterisk will not fit Edelbrock carbs with electric choke.
7/8" Drop Complete Assembly, without Vent Kit
601430 3" element, 3.12" total ht ....... 109.99 ea
1-1/4" Drop Complete Assembly, without Vent Kit
601300* 5" element, 4.75" total ht ....... 119.99 ea
601310* 6" element, 5.75" total ht ....... 119.99 ea
K&N 11" Stainless Steel Air Cleaner
This air cleaner is perfect when high performance is
desired but space is at a premium. 5-1/8" flange fits all
popular 4-barrel carburetors. Your choice of 4 element
heights are offered to fit a wide variety of applications.
3/4" vent kit is included. Total height listed below is
the minimum clearance needed above the carburetor
flange. Top is made of long lasting polished stainless
steel while bottom is an attractive chrome finish.
11" Diameter Complete Assembly, with Vent Kit
601170
2-1/8" element, 3.12" total ht . 129.99 ea
601180
3-1/2" element, 4.75" total ht . 109.99 ea
601210 6" element 7.00" total ht ........ 119.99 ea
13971
13973
Custom Air Cleaner Assemblies
601290
14" Raised Profile Chrome Air Cleaner
K
This air cleaner raises the element 9/16" above the
carburetor flange. 5-1/8" flange fits all popular 4barrel carburetors. Your choice of 4 element heights
are offered to fit a wide variety of applications. Will
clear HEI distributors. Vent kit is included. Total height
listed below is the minimum clearance needed above
the carburetor flange.
9/16" Raised Profile Complete Assembly, w/vent kit
601263 2-1/4" element, 3.87" total ht . 114.99 ea
K&N 14" Triangular Chrome Air Cleaner
Breathe a little life into your engine compartment!
This triangular air cleaner will set your underhood
area apart from the norm. The 5-1/8" flange fits all
popular 4-barrel carburetors. Element height is 3"
while 3.62" is the minimum clearance needed above
the carburetor flange.
14" Triangular Complete Assembly, with Vent Kit
434
You’ve got billet spokes on your wheels, now
get precision machined billet spokes in your
engine compartment! K&N, renowned for superior
performance, durability, and styling in their filters,
combines serious air flow with gorgeous looks in these
round, 14" billet aluminum air cleaners with either a 5
spoke or 10 spoke lid. Both styles include a carbon fiber
insert and a 3" tall K&N element. They are designed
to fit 5-1/8" carburetor flanges, and are available with
either a 1-1/4" drop base or a standard 9/16" raised base.
13971 5 spoke w/1-1/4" drop base.... 261.99 ea
13972 5 spoke w/9/16" raised base ... 261.99 ea
13973 10 spoke w/1-1/4" drop base.... 261.99 ea
13974 10 spoke w/9/16" raised base ... 261.99 ea
13975 5 spoke lid only ...................... 159.99 ea
13976 10 spoke lid only ...................... 159.99 ea
K&N Air Filter Oil & Clean/
Degreaser Kit!
K&N Air Filter Oil and
Cleaner/Degreaser is
the only oil and cleaner/
degreaser specially
formulated to work in
combination with the
cotton fabric in the
K&N filter. The use of
any other could void
the filter’s warranty and
potentially harm the air
filter’s cotton material. The cleaner/
degreaser works to dissolve the dirt build up and old
oil filter oil and can be washed away with water. It is
environmentally friendly, and when used as directed,
is safe on paint, chrome, cast aluminum, plastic,
rubber and vinyl. Each kit includes oil, cleaner/
degreaser, and service decal. Your choice of 6-1/2 oz.
aerosol spray or 8 oz. squeeze oil bottle is offered.
995000 kit w/6-1/2 oz. aerosol oil ....... 14.99 set
995050 kit with 8 oz. squeeze oil ...... 9.99 set
K&N Performance Filters
E1220
E1220
E1220
E1650
E1220
E1650
E1070
E1650
E1650
E1590
E1650
E1650
E1650
E1590
E1650
E1650
E1590
E1650
E1650
E1070
E1650
E1590
E1450
E1450
E1500
E1450
E1590
E1450
E1590
E1650
E1450
E1450
E1450
E1500
E1410
E1500
E1450
E1410
E1430
E1410
E1500
E1015
E1117
E1030
E1450
E1015
E0890
E0890
E0890
E0890
E0890
E1450
E0890
E0870
E1450
E0890
E0890
E1450
332042
332042
332042
332035
332118
332118
1968
1968
1968-70
1968
1968
1968
1969-76
1969
1969-70
1970
1971
1971
1971-76
1972-79
1972-79
1972-76
1972-76
1972-74
1975-77
1977-78
1977-78
1977-78
1977
1978-79
1978-79
1973
1979
1979-80
1979
1979
1979-80
1980
1980
1980
1980
1980
1981
1981
1981
1981
1981
1982-83
1982-83
1982-84
1982-87
1984-86
1985-86
1985-86
1987
1987-92
1987-89
1988
1988-89
1989
1989-90
1990-92
1990-92
1991-92
1993-95
1993-97
1995-97
1996-97
1998-02
1998-02
250 1 bbl ...................
250 4 bbl ...................
350 2 bbl ...................
350 4 bbl ...................
400 2 bbl ...................
400 4 bbl ...................
250 1 bbl ..................
350 4 bbl w/o Ram Air
400 4 bbl w/Ram Air ...
455 4 bbl ..................
400 4 bbl ...................
350 2 bbl ..................
400 2 bbl ..................
350 4 bbl ..................
231 2 bbl ..................
301 2 bbl ...................
305 2 bbl ...................
350 4 bbl ...................
301 2 bbl ...................
403 4 bbl w/Trans Am .
403 4 bbl w/o Trans Am
231 2 bbl ...................
265 2 bbl ...................
301 4 bbl w/Turbo.......
305 4 bbl w/Trans Am .
305 4 bbl w/o Trans Am
3.8L 2 bbl w/Trans Am
4.3L 2 bbl .................
4.9L 4 bbl w/Turbo .....
4.9L 4 bbl w/o Turbo...
5.0L 4 bbl .................
2.5L TBI ....................
5.0L TBI 2 required.....
2.8L 2 bbl ..................
5.0L 4 bbl ..................
2.5L FI .......................
5.0L FI .......................
2.8L FI .......................
2.8L MFI ...................
5.0L TPI ....................
5.7L TPI ....................
5.0L FI .......................
2.8L FI .......................
3.8L FI w/Turbo ..........
5.0L EFI ....................
3.1L FI .......................
5.7L FI .......................
5.0L TBI ....................
3.4L FI .......................
5.7L FI w/o Ram Air....
3.8L FI .......................
5.7L FI w/Ram Air ......
3.8L FI .......................
5.7L FI .......................
51.99
51.99
51.99
49.99
51.99
49.99
47.99
49.99
49.99
54.99
49.99
49.99
49.99
54.99
49.99
49.99
54.99
49.99
49.99
47.99
49.99
54.99
46.99
46.99
45.99
46.99
54.99
46.99
54.99
49.99
46.99
46.99
46.99
45.99
54.99
45.99
46.99
54.99
51.99
54.99
45.99
42.99
44.99
49.99
46.99
42.99
41.99
41.99
41.99
41.99
41.99
46.99
41.99
39.99
46.99
41.99
41.99
46.99
44.99
44.99
44.99
85.99
64.99
64.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
Air Filter Sealing Grease
K&N Air Filter Sealing Grease seals the air cleaner
assembly, eliminating the possibility of dirt, dust and
other particles from entering your carburetor from
between the air filter element and air cleaner assembly.
This is especially important if you will be operating
your vehicle off road or in extremely dusty conditions
such as construction sites, etc. K&N Air Filter Sealing
Grease resists heat and will not melt or run off.
990704 6 ounce tube ............................. 11.99 ea
PERFORMANCE FILTERS
663060
complete assembly
K&N Air Cleaner Assemblies
A K&N Air Filter Element can be washed up to 25
times before it is considered no longer serviceable.
Even though the filter may not show outward signs of
deterioration, it should be replaced after 25 washings.
Excessive washings will deplete the tiny cotton hairs
that crisscross the openings. The resulting damage will
allow tiny dust particles to pass through. The elements
listed below are designed for use with our K&N chrome
and stainless steel air cleaner assemblies.
14" Round Elements
E1650
3" height, 14" diameter ............ 49.99 ea
E3750
E3760
E3770
11" Round Elements
KE1200 2-1/8" height, 11" diameter ..... 57.99 ea
E1250
3-1/2" height, 11" diameter ...... 55.99 ea
E3680
5" height, 11" diameter............. 62.99 ea
E3690
6" height, 11" diameter............. 66.99 ea
14" Triangular Element
E3737
3" height, 14" triangular ........... 62.99 ea
K&N PreCharger®
The K&N PreCharger® is a specially designed filter
wrap made to extend the length of time between
cleanings. A great idea when operating off road or
in very dusty conditions. They are made from a
durable polyester material containing uniform micron
openings. The PreCharger® will stop small particles,
yet add little restriction to the airflow of the filter.
The PreCharger® is designed to be run dry and can
be cleaned with K&N Filter Cleaner. Double stitched
elastic openings keep the PreCharger® securely in
place. Each comes silk screened with the K&N logo.
Choose from black, blue, red or yellow.
red rim
blue rim
polished rim
XStream Air Flow Top and Assembly
If your engine still has its stock style filter element and
air cleaner assembly, it most likely is not realizing its full
horsepower potential. Restrictive elements combined
with the turbulence inside a stock filter housing tend to
choke off critical airflow. Put an end to this dilemma
with K&N’s XStream® Air Flow Top or the XStream®
Air Flow Assembly and feed your engine all the air
it can use. The result will be maximum horsepower!
Choose from the complete assembly or just add the top
to your existing round filter. Either way, you’ll enjoy
the benefits of a high flow element that cuts turbulence.
Cleanable and reusable just like our other filters. Total
height listed below is the minimum clearance needed
above the carburetor flange.
XStream Air Flow Top (Top Only)
661401
14" black rim ........................ 69.99 ea
661401XP 14" polished rim ................... 79.99 ea
661401XB 14" blue rim .......................... 79.99 ea
661401XR 14" red rim ............................ 79.99 ea
XStream Air Flow Assembly 7/8" Drop (For 5-1/8"
Neck Flange)
663050
3" element (3-1/8" height) .... 169.99 ea
XStream Air Flow Assembly 1-1/4" Drop (For 5-1/8"
Neck Flange)
663040
663060
663070
XStream Air Flow Assembly Raised 9/16" Base (For
5-1/8" Neck Flange)
663010
663020
663030
blue
red
11" Diameter PreCharger®
E1250P 3-1/2" height ...........................
E3680P 5" height ..................................
E3690P 6" height ..................................
14" Diameter PreCharger®
E1650P 3" height .................................
E3750P 4" height ..................................
E3760P 5" height ..................................
E3770P 6" height ..................................
19.99 ea
19.99 ea
19.99 ea
24.99
24.99
24.99
24.99
blue
red
yellow
K&N PreCharger®
yellow
ea
ea
ea
ea
K&N Carburetor Cover
Damage to pistons, rings
and other components can
be caused by accidently
dropping something into
your carb while the air
cleaner assembly is off.
The K&N Carburetor Cover
is used on 5-1/8" carburetors eliminating the risk
of dropping bolts, nuts, screws or other items down
the throat and into the intake manifold. Also works
well in keeping dirt, dust and other elements out of
your carb during times you must store your engine
or vehicle with the air cleaner assembly removed.
Choose from black, red or orange.
5-1/8" Carburetor Cover
858913C specify black, red or orange ..... 31.99 ea
The K&N PreCharger® is a specially designed filter
wrap made to extend the length of time between
cleanings. A great idea when operating off road or
in very dusty conditions. They are made from a
durable polyester material containing uniform micron
openings. The PreCharger® will stop small particles,
yet add little restriction to the airflow of the filter. The
PreCharger® is designed to be run dry and can be cleaned
with K&N Filter Cleaner. Each comes silk screened
with the K&N logo. Choose from black, blue, red or
yellow, please specify color when ordering.
14" Diameter XStream® Top PreChargers
221430
with 3" element...................... 39.99 ea
221440
with 4" element...................... 39.99 ea
221450
with 5" element...................... 44.99 ea
In the K&N tradition of engineering power, the K&N
Filtercharger Injection Performance Kit (FIPK)
dramatically reduces intake restrictions as it smooths and
straightens air flow. This allows your vehicle’s engine to
inhale a larger volume of air then in the OEM air filter
assembly. More air means more usable power and torque
throughout the engines RPM range, with even greater
power gains in turbo-charged and supercharged engines.
Fuel Injection Performance Kits are available for many
popular performance vehicles, and are designed to replace
the original air filter case without jeopardizing important
emission standards. Exempted by the California Air
Resource Board, Fuel Injection Performance Kits make it
possible to experience the rapid acceleration of advanced
air flow while meeting the tough emissions standards
of C.A.R.B. These Fuel Injection Performance Kits are
washable, reusable and backed by K&N’s unique 10
year Million Mile Limited Warranty.
5730101 1993-95 3.4L F/I.................. 254.99 ea
5730101 1993-97 5.7L w/oRA or TC 254.99 ea
5730222 1998-02 5.7L w/o Ram Air . 399.99 ea
K&N Performance Filters
435
black
The K&N Airforce Pre-Cleaner is a specially designed
foam filter wrap made to extend the service interval
of your K&N Air Filter. It is especially helpful when
operating in very dusty conditions such as off-road or
in construction sites. Manufactured from large open
cell foam, the Airforce Pre-Cleaners are available
as a custom fit application for 14" round elements
or as a universal “cut to fit” application. “Cut to fit”
applications come with velcro straps to secure the
foam to your air cleaner.
14" Diameter Custom Fit Airforce Pre-Cleaners
253750 with 4" high element ................ 24.99 ea
Universal “Cut To Fit” Airforce Pre-Cleaners
253900 7" high x 48" long .................... 24.99 ea
253918 18" high x 48" long .................. 49.99 ea
253924 24" high x 48" long .................. 59.99 ea
253930 30" high x 48" long .................. 75.99 ea
1993-02 K&N Fuel Injection Kits
black
Please specify color when placing your order
universal fit pre-cleaner
K&N Airforce Pre-Cleaner
PRECHARGERS
Important: Please specify black, blue, red or yellow when
you place your order.
Four Colors To Choose From!
custom fit pre-cleaner
AR801451
AirAid Universal 14" Air Filter
E4222
Elite Series Air Cleaners
Designed to match the Elite Series valve covers and
breathers. All Elite series air cleaners have polished
aluminum finned tops a with black matte background.
Available with the Edelbrock logo. All include a black
anodized knurled nut and PCV adapter. For use on
5-1/8" carburetor necks. Important: Use E4221 with all
Edelbrock square bore carburetors and Q-jets.
E4207
with logo ................................. 79.99
E4221
with logo ................................. 79.99
E4210
with logo ................................. 69.99
Triangular w/2-1/2" washable element
E4222
with logo ................................. 124.99
ea
ea
AirAid's Concept II filter features a beautiful
lightweight aluminum lid that's perfect for user
customization. The curved top enhances air flow and
provides additional clearance for the carburetor float
bowl vents. . The new element features SynthaMax
material, a 100% synthetic, non-oiled, color fast, classic
red media. Billet tool & key fob included. Available
in 3", 4" and 5" size.
AR801451 3" element ........................ 159.99 ea
AR801455 4" element ........................ 164.99 ea
AR801461 5" element ........................ 169.99 ea
Rubber Air Cleaner Base Gasket
This buna rubber air cleaner base gasket forms a
positive seal between the air cleaner and the top
of carburetors with a 5-1/8" neck. Designed for air
cleaners with a straight lip, the gasket has a groove
that fits over the lip for a superior seal against dust and
debris. It can also be flipped and used on air cleaners
with a rolled lip.
297331 .................................................. 6.99 ea
ea
ea
D141332
D141327
Air Cleaner Adaptor Carb Neck
Hi-Tech Air Cleaner Wing Nuts
Adapter to fit 5-1/8" air cleaners to 4-7/32" carburetor
necks.
66315
.................................................. 7.99 ea
Available in both large and small sizes! The large size
is recommended for 10" or 14" air cleaner kits and the
small for 6-3/4" or 4-7/16" air cleaners. Each air cleaner
spinner is die cast showing the logo, coated with clear
epoxy. They fit both 1/4" - 20 and 5/16" - 18 studs.
D141332
small ...................................... 9.99 ea
D141327
large....................................... 12.99 ea
SP98801
66200
E8092
K
SP98891
66201
Edelbrock Air Cleaner Spacers
These 5-1/8" diameter plastic spacers from Edelbrock
get you the clearance you need between the carburetor
and air cleaner base. Available in 1/2" and 3/4" sizes.
Made in USA.
E8093
E8092
1/2" tall spacer.......................... 14.99 ea
3/4" tall spacer.......................... 6.99 ea
Tri-Star Chrome Air Cleaner Wing Nut
Air cleaner Tri-Star nut offers a unique, performance
appearance and will fit virtually any air cleaner.
Available in large or small format.
66201
small ......................................... 1.99 ea
66200
large .......................................... 2.99 ea
SP98851
K0073
Spectre Low Profile Oval Inlet Air Cleaner
Looking to add a high tech look to your engine
compartment? Check out these Spectre ProFab low
profile oval inlet polished air cleaners. Available in
single, or 90º dual styles. Fits all carburetors or TBI
with 5-1/8" neck. Includes Spectre's HPR air filter.
SP98801 single .................................... 199.99 ea
SP98891 90º dual ................................ 199.99 ea
436
1967-81 Carburetor to Air Cleaner Stud
Replacement carburetor stud for all 1967-81 models
equipped with Rochester and Carter carburetors. Cut
to required length.
Important: Hood damage may occur if stud is not trimmed
to fit.
3851738
1967-81
1/4"-20 x 9" ............. 6.99 ea
A13258
1967-81 Standard Air Cleaner Wing Nut
Correct wing nut used with all 1/4" carburetor studs.
After years of use your original air cleaner can become
rusted or broken. These wing nuts are the perfect
replacement for a rusty or damaged original.
219281 1967-81 chrome ...................... 4.99 ea
A13258 1967-81 standard .................... 1.99 ea
Air Cleaner Products
G1313
Chrome Air Cleaner Shroud
Keep dirt out of your air cleaner without losing
breathing capacity. Fits 14" air cleaners with 3"
elements. This shroud will dress your engine
compartment and compliment your chrome air cleaner.
T2337
.................................................. 9.99 ea
1998-02 Air Temperature Sensor
1980-81 Air Cleaner Sensor Units
Original AC Delco air sensors install in the air cleaner
snorkel which allows the flapper door located in the
snorkel to open allowing cooler air to enter.
G10044 1980
301 w/perf. option . 68.99 ea
G1313 1980-81 305 ......................... 100.99 ea
G10044 1980-81 4.9L........................ 68.99 ea
G10044 1981
301 all .................... 68.99 ea
Original AC Delco sensor mounts on the duct between
the mass air flow sensor and the throttle body.
G4263 1998-02 .................................... 17.99 ea
1998-02 Air Cleaner Housing
1973-79 Air Intake Duct Hose
Original GM air cleaner housing for the air filter on
all 1998-02 Firebird models.
G4260 1998-02 all ........................... 158.99 ea
This reproduction duct hose for 1973-79 Firebird
models delivers fresh cool air from the fender to the air
cleaner. Manufactured from 4" wire reinforced plastic
skinned flexible tubing, this duct hose includes correct
factory style clamps riveted to the wire reinforcement.
Note: Not for use with 1977-81 Pontiac 301 ci engines.
162912
G4264
1973-79 ................................... 34.99 ea
G4262
1999-02 Air Cleaner Resonator
TA4039
G4256
G4267
1993-02 Intake Air Ducts
TA4040
1977-79 Trans Am Air Cleaner Elbow
The only intake that draws cool air from
outside the HOT engine compartment!
1998-02 Volant Cool Air Intake
1994-97 JET Inlet Air Temp Relocator
1973-81 Air Cleaner Duct Housing Adapter
Reproduction of the ABS plastic air cleaner duct
housing adapter used on 1973-81 Trans Am models.
This part mounts on the air cleaner and converts the
2" x 6" oval hole on the air cleaner the 4" round air
duct hose on the fender air scoop.
14401
1973-81 .................................... 52.99 ea
The JET IAT Relocator kit repositions the Inlet Air
Temperature sensor to a cooler location in the air
intake system to provide a lower air temperature
reading to the computer. By doing this throttle response
and horsepower are increased along with improved
drivability. No other vehicle modifications are required,
but the kit is compatible with other aftermarket
upgrades such as computer upgrades, cold air intakes,
free flow exhaust systems, etc.
JT61630 1994-97 350 LT1................... 44.99 ea
Volant Cool Air Intakes are all about providing
performance while adding a look of style and attitude
to your fuel injected Firebird. This is the only intake
that draws cool air from outside the HOT engine
compartment! This is accomplished by concealing
the high flow gauze cone filter inside a roto-molded
cool air box, forcing the intake to draw air through
the fender and grill areas. This provides the coolest
air charge to your fuel injection and creates the most
horsepower possible. By isolating the air filter, it
prevents excessive engine noise while still providing
the optimum performance. Volant manufactures each
cool air box with a stylish look and connects the
components using high performance silicone couplers.
V15958 1998-02 5.7 .......................... 321.99 ea
Air Cleaner Products
437
Reproduction Oldsmobile 403 engine air cleaner to
vent pipe rubber elbow for 1977-79 Trans Am models.
This elbow connects the breather pipe to the air cleaner
and valve cover breather.
TA4039 1977-79 long .......................... 8.99 ea
TA4040 1977-79 short ......................... 7.99 ea
Original GM air duct that connects the mass air flow
sensor to the intake manifold.
Front Air Duct
G4264 1998-02 8 cyl. ....................... 65.99 ea
Rear Air Duct
G4254 1993-94 8 cyl. w/AC ............. 276.99 ea
G4255 1993-94 8 cyl. w/o AC ........... 76.99 ea
G4257 1995
8 cyl. w/o AC ........... 156.99 ea
G4256 1996-97 8 cyl. w/AC.............. 198.99 ea
G4267 1998-02 8 cyl. ....................... 51.99 ea
Original GM resonator that connect to the front of the
air cleaner cover.
G4262 1999-02 6 cyl. ...................... 118.99 ea
G4266 2000-02 8 cyl. ...................... 63.99 ea
Performance Intakes
SP70228A
SP70771A
SP74762A
blue
SP70168A
SP70188B
SP70771C
SP70764C
SP70778D
SP70741A
blue
SP70761A
blue
SP70796D
K
blue
black
red
Universal Dual Plenum Air Intakes
These air intake systems use a dual plenum design
available with two 45˚ intake tubes or two 6" straight
tubes both with two filters to get the most power from
your engine! Includes intake tubes, filters, boots,
clamps, and hardware. Choose from blue, black, red,
or white filters. Fits standard 5-1/8" carb neck.
Note: *Requires 3-1/2" clearance between the top of the
carburetor and the hood. **Requires 3-3/4" clearance
between the top of the carburetor and the hood.
45˚ Tubes
SP70761A* blue filters......................... 199.99
SP70761B* black filters ....................... 199.99
SP70761C* red filters .......................... 199.99
SP70761D* white filters....................... 199.99
6" Straight Through Tubes
SP70796A** blue filters......................... 199.99
SP70796B** black filters ....................... 199.99
SP70796C** red filters .......................... 199.99
SP70796D** white filters....................... 199.99
438
black
red
ea
ea
ea
ea
ea
ea
ea
ea
Spectre Performance
Get the most power from your engine with these sheet
metal aluminum plenum designs, offering extremely
low profile dimensions for tight hood clearance
applications. Available with two 45˚ tubes or two
45˚/90˚ tubes. Fits all carburetors and TBI throttle
bodies with 5-1/8" neck. Includes intake tubes, filters,
boots, clamps, and hardware. Choose from blue, black,
red, or white filters.
Note: *Requires 2-1/2" clearance between the top of the
carburetor and the hood. **Requires 2" clearance between
the top of the carburetor and the hood.
Dual Plenum Air Intakes
SP70771A* blue filters......................... 249.99
SP70771B* black filters ....................... 249.99
SP70771C* red filters .......................... 249.99
SP70771D* white filters....................... 249.99
Dual Plenum Sheet Metal Intakes
Intake with Two 45˚/90˚ tubes
SP70764C** red filters .......................... 269.99
SP70764D** white filters....................... 269.99
Intake with Two 45˚ Tubes
SP70778B** black filters ....................... 229.99
SP70778C** red filters .......................... 229.99
SP70778D** white filters....................... 229.99
black
SP70752D
red
white
Universal 90˚/45˚ Single Plenum Air Intake
white
Low Profile Dual Plenum Air Intakes
white
white
red
These muscle car air cleaners combine a modern
appearance with the classic style of the past. Washable
and reusable, these lifetime filters provide more power
and performance by allowing more air flow into your
engine than ordinary paper filters. Includes the top,
base, and Spectre HPR® air filter in your choice of
red, blue, black or white.
3" Tall Filter
SP74762A blue ..................................... 99.99 ea
SP74762B black.................................... 99.99 ea
SP74762C red ....................................... 99.99 ea
SP74762D white ................................... 99.99 ea
4" Tall Filter
SP74763A blue ..................................... 119.99 ea
SP74763B black.................................... 119.99 ea
SP74763C red ....................................... 119.99 ea
SP74763D white ................................... 119.99 ea
Universal 14" or 16" Air Boxes
Direct cool air into your engine with these universal
air boxes. Includes components and hardware for
installation in most vehicles. 180˚, 150˚, 135˚, and
120˚ versions are available. Choose from 14" or 16"
housing with either black or chrome ducting. Fits
standard 5-1/8" carb neck.
14" Universal Air Box
SP70228A black duct
180˚ ............ 149.99 ea
SP70228B chrome duct 180˚ ............ 229.99 ea
SP70318A black duct
150˚ ............ 149.99 ea
SP70328A black duct
135˚ ............ 149.99 ea
SP70338A black duct
120˚ ............ 149.99 ea
16" Universal Air Box
SP70168A black duct
180˚ ............ 199.99 ea
SP70188A black duct
150˚ ............ 249.99 ea
SP70138A black duct
135˚ ............ 249.99 ea
SP70118A black duct
120˚ ............ 199.99 ea
black
Extraflow 14" Air Cleaners
SP70771B
SP70338B
ea
ea
ea
ea
ea
ea
ea
ea
ea
These air intake systems use a single plenum design
with 45˚/90˚ tube to get the most power from your
engine! Available for driver or passenger side in
standard height or low profile configuration. Includes
intake tubes, filters, boots, clamps, and hardware.
Choose from blue, black, red, or white filters. Fits
Note: Standard height air intakes require 3-1/2" clearance
between the top of the carburetor and the hood. Low-profile
air intakes require 2-1/2" clearance between the top of the
carburetor and the hood.
Standard Height Air Intakes
SP70741A blue filter passenger side .
SP70741B black filter passenger side .
SP70741C red filter
passenger side .
SP70741D white filter passenger side .
SP70742A blue filter driver side........
SP70742B black filter driver side........
driver side........
SP70742D white filter driver side........
Low-Profile Air Intakes
SP70751A blue filter passenger side .
SP70751B black filter passenger side .
passenger side .
SP70751D white filter passenger side .
SP70752A blue filter driver side........
SP70752B black filter driver side........
driver side........
SP70752D white filter driver side........
149.99
149.99
149.99
149.99
149.99
149.99
149.99
149.99
ea
ea
ea
ea
ea
ea
ea
ea
149.99
149.99
149.99
149.99
149.99
149.99
149.99
149.99
ea
ea
ea
ea
ea
ea
ea
ea
Performance Intakes
SP70793C
SP70792B
SP71015B
SP71014A
SP70757C
blue
SP70747B
black
red
white
Universal DTM Plenum Air Intakes
SP71018A
These air intake systems use a DTM (Down The
Middle) plenum design with either a 90˚ or Y-tube
tube to get the most power from your engine! Includes
intake tubes, filters, boots, clamps, and hardware.
Choose from blue, black, red, or white filters. Fits
Note: Each DTM intake requires 2-1/4" clearance between
the top of the carburetor and the hood.
90˚ Tube
SP70792A
SP70792B
SP70792C
SP70792D
Y-Tube
SP70793A
SP70793B
SP70793C
SP70793D
SP70758C
299.99
299.99
299.99
299.99
ea
ea
ea
ea
blue filter ............................
black filter ..........................
red filter..............................
white filter ..........................
339.99
339.99
339.99
339.99
ea
ea
ea
ea
SP71013D
SP71010A
black
red
white
Universal Single Plenum Air Intakes
These air intake systems use a single plenum design
with 90˚ tube to get the most power from your
engine! Available in standard height or low profile
configuration. Includes intake tubes, filters, boots,
clamps, and hardware. Choose from blue, black, red,
or white filters. Fits standard 5-1/8" carb neck.
Standard Height - 90° Tube
SP70747A blue filter ...........................
SP70747B black filter .........................
SP70747C red filter .............................
SP70747D white filter .........................
Low Profile - 90° Tube
SP70757A blue filter ...........................
SP70757B black filter .........................
SP70757C red filter .............................
SP70757D white filter .........................
Standard Height - Y-Tube
SP70748A blue filters..........................
SP70748B black filters ........................
SP70748C red filters ...........................
SP70748D white filters........................
Low Profile - Y-Tube
SP70758A blue filters..........................
SP70758B black filters ........................
SP70758C red filters ...........................
SP70758D white filters........................
149.99
149.99
149.99
149.99
ea
ea
ea
ea
149.99
149.99
149.99
149.99
ea
ea
ea
ea
199.99
199.99
199.99
199.99
ea
ea
ea
ea
199.99
199.99
199.99
199.99
ea
ea
ea
ea
black
red
white
black
red
white
®
Spectre HPR Cone Air Filters
®
These Spectre HPR air filters are the most versatile of
their kind on the market! Designed to fit 3", 3-1/2", and
4" tubes. Washable and reusable, these lifetime filters
provide more power and performance by allowing more
air flow into your engine than ordinary paper filters.
Note: *Will only fit 3" inlet tubes. Also features all-rubber
construction, no chrome finish.
3.7" Tall Filter
SP71011A blue.....................................
SP71011B black ...................................
SP71011C red ......................................
SP71011D white...................................
6.5" Tall Filter
SP71010A* blue.....................................
SP71010B* black ...................................
SP71010C* red ......................................
SP71010D* white...................................
6.7" Tall Filter
SP71012A blue.....................................
SP71012B black ...................................
SP71012C red ......................................
SP71012D white...................................
10.5" Tall Filter
SP71013A blue.....................................
SP71013B black ...................................
SP71013C red ......................................
SP71013D white...................................
19.99
19.99
19.99
19.99
ea
ea
ea
ea
19.99
19.99
19.99
19.99
ea
ea
ea
ea
29.99
29.99
29.99
29.99
ea
ea
ea
ea
39.99
39.99
39.99
39.99
ea
ea
ea
ea
Spectre HPR Air Filters
Speed By Spectre HPR® (high performance racing)
air filters - the world's fastest air filters! Washable and
reusable, these lifetime filters are designed to provide
you with more horsepower and quicker acceleration by
allowing more air flow into your engine than ordinary
paper filters.
Round Filter - 14" x 4"
SP71014A blue ..................................... 39.99 ea
SP71014B black ................................... 39.99 ea
SP71014C red ....................................... 39.99 ea
SP71014D white ................................... 39.99 ea
Round Filter - 14" x 5"
SP71015A blue ..................................... 59.99 ea
SP71015B black ................................... 59.99 ea
SP71015C red ....................................... 59.99 ea
SP71015D white ................................... 59.99 ea
Oval Filter - 11-1/2" x 8" x 2"
SP71016A blue ..................................... 29.99 ea
SP71016B black ................................... 29.99 ea
SP71016C red ....................................... 29.99 ea
SP71016D white ................................... 29.99 ea
Oval Filter - 15" x 8" x 2"
SP71017A blue ..................................... 39.99 ea
SP71017B black ................................... 39.99 ea
SP71017C red ....................................... 39.99 ea
SP71017D white ................................... 39.99 ea
Triangle Filter - 14" x 3"
SP71018A blue ..................................... 49.99 ea
SP71018B black ................................... 49.99 ea
SP71018C red ....................................... 49.99 ea
SP71018D white ................................... 49.99 ea
Spectre Accucharge
Precision Air Filter
Oiling System
The Accucharge
precision oiling system
applies the correct
amount of oil for
optimal performance
- no more, no less.
Designed specifically
for cleaning and oiling
of Spectre HPR®
filters. As simple to
use as a measuring
cup! Includes 12 oz. of
cleaner and 8 oz. of oil.
SP704820 .............................................. 12.99 ea
Spectre Performance
439
Note: Standard height air intakes require 3-1/2" clearance
between the top of the carburetor and the hood. Low-profile
air intakes require 2-1/2" clearance between the top of the
carburetor and the hood.
blue
blue
®
blue filter ............................
black filter ..........................
red filter..............................
white filter ..........................
SP70748A
blue
SP71017B
Valve Covers
G7211
T9461
G7210
1977-86 Clear Vue SB Chevy Valve Covers
Clear Vue valve covers show off your valve train to
make any custom motor unique. These covers are
manufactured from a heat resistant clear material that
will not warp, haze, or become yellow over time. Oil
sheets off after high RPM in about 30 seconds. These
valve covers are NHRA certified for Sportsman Gas
Class vehicles. Sets include two clear valve covers,
two stainless steel deflector plates and two chrome
breather caps with grommets. Made in USA.
N9460
301-455 Low Profile Chrome Valve Covers
Dress up your engine compartment with these
aftermarket and OEM style valve covers for 1967-81
Pontiac models with 301-455 V8 (except turbo). These
triple chrome plated valve covers feature a low profile
design and are available in double ribbed form or with
a smooth design. Ribbed valve covers are designed for
push-in oil caps. Smooth valve covers are designed for a
twist-on oil cap on the left side with a breather opening
on the right and are available with drippers to get the
oil where it needs to be to reduce wear on your engine.
T9461
ribbed w/o drippers ......... 59.99 pr
A8700118 smooth w/o drippers ......... 109.99 pr
N9460
smooth w/drippers ............ 135.99 pr
G7206
Important: Spreader bars recommended for installation. Not
for use on menthanol supercharged engines.
10110
1977-86 ................................... 289.99 set
G7209
1977-92 Chevy Small Block Valve Covers
Direct replacements for damaged original valve covers
for 1977-92 Firebird equipped with Chevrolet V8 small
block engines. These valve covers are designed to replace
originals which may have suffered dents or other signs
of neglect. Features original GM black finish.
Note: Valve covers do not include grommets which may be
purchased separately.
1962-79 301-455 Valve Covers
Aftermarket style chrome valve covers for all Pontiacs
with 301-455 V8. This chrome valve cover is a high
profile cover featuring triple chrome plating. Dress
up your engine compartment with this aftermarket
chrome valve cover. Pontiac engines only.
Left Hand Side
G7206 1977-86
G7209 1987-88
G7209 1989
G7210 1990-92
G7209 1990-92
Right Hand Side
G7208 1987-88
G7208 1989
G7208 1990-92
G7209 1990-92
G7211
1990-92
V8 ............................
5.0-E/F/H & 5.7-8 .....
5.0-E/F & 5.7-8 .......
5.0-E ........................
5.0-F 5.7-8 ...............
79.99
71.99
71.99
73.99
71.99
ea
ea
ea
ea
ea
5.0-E/F/H & 5.7-8 ......
5.0-E/F & 5.7-8 .......
5.0-E ........................
5.0-F & 5.7-8 ...........
5.0-F & 5.7-8 ...........
68.99
68.99
68.99
71.99
68.99
ea
ea
ea
ea
ea
Note: Not for use on cars w/AC.
T9300
1962-79 .................................... 69.99 pr
141915
1977-86 Chevy SB Aluminum Valve Covers
Now you can easily check your valve train while the
engine is running. The diagonal cut of the top section
ensures no mess. Each valve cover features oversize
bolts for fast removal, a top and bottom section, and a
retained gasket for a tight seal. Will clear roller rockers
and stud girdles. Comes with required allen wrench. Fits
Chevrolet small block 1977-86 engines. Removable
OEM style baffle. Valve covers come equipped with
baffle and grommets. Sold in pairs.
141915 1977-86 valve covers ............ 209.99 pr
141916 1977-86 gasket set ................ 16.99 set
K
VC4007
TA4036
1977-79 Trans Am Valve Covers
Valve cover for 1977-79 Trans Am models with
Oldsmobile 403 engines. These Oldsmobile factory
correct notched valve covers feature correct baffle
design and factory spot welds and valve covers are
chrome plated for corrosion resistance and long
lasting good looks. Available in either paint to match
or chrome finish.
Note: Due to variations in cylinder heads only five bolts
may be required to securely mount valve covers.
TA4036 1977-79 chrome ................... 233.99 pr
TA4035 1977-79 paint to match ........ 181.99 pr
440
Valve Covers
952240
VC5002
Small Block Chevrolet Valve Covers
Streamline Series Valve Covers
Die cast finned aluminum valve covers for small
block Chevrolet motors are available in either a highly
polished or beautiful black powder coat finish and
include two chrome breather caps.
Get a fresh new look for your small block Chevy
engine! These tall valve covers are manufactured from
cast aluminum with polished two-piece billet accents.
Available with a satin black powder coat or bead blasted
and ready to paint. Includes stainless steel hardware
and baffles. A great complement to Streamline series
air cleaners! Made in USA.
Note: * Breather caps not included
Polished Aluminum
VC4002
350...................................... 224.99 pr
VC4007* finned, no holes .................. 224.99 pr
Powder Coated Black
VC5002
350...................................... 199.99 pr
952240
952241
black ................................... 199.99 pr
ready to finish..................... 199.99 pr
Valve Covers
1993-97 Aluminum LT1 Valve Covers
These premium valve covers are designed specifically
for 1993-97 GM LT1 engines. Manufactured from cast
aluminum and polished to a high luster. Valve covers
include new bolts, baffles and grommets.
Pontiac Aluminum Valve Covers
Note: Gaskets not included.
6045
1993-97
LT1 valve covers ... 129.99 pr
E4130
1962-79 Edelbrock Aluminum Valve Covers
Die cast finned aluminum Pontiac valve covers. These
top quality valve covers feature a bright polished finish
and include two chrome breather caps and grommets.
Fits Pontiac 301-455 engines.
VC8001 Pontiac................................... 299.99 pr
Edelbrock made these valve covers in the late 50s,
and they’re still classy today. Made of heavy gauge,
sand cast aluminum, they have enough height to clear
the rockers.
Pontiac 301-455
E4130
1962-79 polished finish .......
E41303 1962-79 black finish ............
Chevrolet Small Block
E4145
polished ...............................
E4144
polished with oil fill hole .....
E41453 black
...............................
E41443 black
with oil fill hole .....
95475
95460
Billet Aluminum LS Valve Covers
249.99 pr
231.99 pr
209.99
209.99
224.99
239.99
pr
pr
pr
pr
Give your LS engine a clean, classic look with these
billet valve covers! Their modular design incorporates
billet tops to cover the ignition coils and the oil cap to
provide the appearance of traditional ribbed aluminum
valve covers. Available in black anodized or mirror
polished finish for LS1 and LS3 engines. Includes
billet oil cap, polished ARP stainless steel hardware,
and installation instructions. Made in USA.
Pontiac Engine Dress Up Set
Dress up your Firebird with this great set which includes
chrome valve covers, hold down tabs for valve covers,
chrome breather, breather grommet, PCV grommet.
Fits Pontiac 301-455 V8 engines. This unique set
will completely dress your engine compartment and
includes virtually every chrome component you’ll
need to impress even the most hard core Pontiac
enthusiast! We offer this chrome dress up set with
baffled valve covers.
Important: Must be used with engine
model specific OEM GM ignition coils.
95460
95465
95470
95475
LS1
LS1
LS3
LS3
polished ....................
black .........................
polished ....................
black .........................
1094.99
1249.99
1094.99
1249.99
pr
pr
pr
pr
E4485
Note: This set will fit all Pontiacs except 389 and 403
models. Not for use on vehicles originally equipped with
air conditioning.
T3100
3-1/2" high .............................. 121.99 set
1967-86 Signature Series Valve Covers
H24183
Holley M/T Valve Covers
Each die–cast valve cover is precision manufactured
with knock–out plugs for stock PCV (smog control)
and oil fill installations. Available for small block
Chevy engines in either polished or krinkle black finish.
H24182 SBC polished ...................... 134.99 pr
H24183 SBC krinkle black............... 124.99 pr
Engineered for function and good looks, triple chrome
plated Signature Series valve covers have stock-style
breather baffles that prevent oil passage to the PCV
valve. These quality valve covers accept all emissions
equipment including PCV valve. Rubber grommets for
the breather and PCV holes are included. Matching
breathers are sold separately.
Pontiac 301-455
E4456
1967-79 no baffle ...................
350 & 403 Olds
E4485
1967-80 5 & 10 bolt heads ....
E4449
1977-86 low profile, chrome .
E4443
1977-86 low profile, black .....
E4649
1977-86 tall profile, chrome ..
E4246
Elite Series Valve Covers
These heavy gauge die-cast aluminum valve covers
come with a handsome polished finish for a custom
look. The raised fins are accented by a black matte
background, then detailed with allen head bolts that
create a two piece look.
54.99 pr
Important: E4246 with left breather hole fits 198792 Chevy passenger cars and 1986-91 Corvettes with
aluminum heads. Not for LT-1 or LT-4.
39.99 pr
39.99 pr
49.99 pr
Pontiac 301-455
E4256 1967-79 ................................... 139.99 pr
Centerbolt Covers
E4246 1987-95 w/LH side breather .... 149.99 pr
51.99 pr
Valve Covers
441
E4456
H24182
PCV Valves & Components
G9095
PCV82
1971-92 Valve Cover Grommets
PCV68
1967-02 PCV Valves
A PCV valve is a vacuum-controlled metering device
that regulates the flow of crankcase fumes in the
positive crankcase ventilation system by allowing
more flow at high speed than at low speed, and acts as
a system shutoff in case of engine backfire to prevent
an explosion in the crankcase. It is recommended to
replace your PCV valves every tune-up. Fits 1967-02
6 and 8 cylinder Firebird models.
6 Cylinder
PCV100 1970-73 250 .......................... 3.99 ea
PCV77 1974-76 250 .......................... 3.99 ea
PCV100 1977-81 231 .......................... 3.99 ea
PCV89 1978
231 AT (exc. CA) ... 2.99 ea
PCV117 1982
2.8L......................... 3.99 ea
PCV82 1983-84 2.8L......................... 3.99 ea
PCV68 1985-89 2.8L......................... 4.99 ea
PCV100 1989
3.8L......................... 3.99 ea
PCV68 1990-92 3.1L......................... 4.99 ea
PCV82 1993-95 3.4L......................... 3.99 ea
PCV68 1995-02 3.8L......................... 4.99 ea
8 Cylinder
PCV20 1967-76 all ............................ 2.99 ea
PCV100 1976
350 w/2bbl , AT ...... 3.99 ea
PCV80 1977
301 .......................... 3.99 ea
PCV76 1977-89 305 .......................... 2.99 ea
PCV20 1977
350, 400, 403 .......... 2.99 ea
PCV76 1978-79 350 .......................... 2.99 ea
PCV20 1977-79 400, 403 .................. 2.99 ea
PCV80 1979-80 301 w/o turbo & HP 3.99 ea
PCV103 1980-81 301 w/HP exc. turbo 3.99 ea
PCV80 1980-81 301 w/turbo ............ 3.99 ea
PCV108 1981
265 .......................... 3.99 ea
PCV76 1981
267 .......................... 2.99 ea
PCV108 1981
301 w/o HP ............. 3.99 ea
PCV76 1987-89 5.7L......................... 2.99 ea
PCV82 1990-92 5.0L-F ..................... 3.99 ea
PCV76 1990-92 5.0L-E..................... 2.99 ea
PCV82 1990-92 5.7L......................... 3.99 ea
PCV145 1993-97 5.7L......................... 3.99 ea
PCV224 2000-02 5.7L......................... 3.99 ea
Keep Your Oil Cleaner With An
Adjustable PCV Valve!
T6068
Aluminum PCV Valve
This aluminum housed PCV valve is just what you
need to finish your engine bay detailing project.
Manufactured with a 3/4" neck for 3/4" ID grommets.
Note: Rubber grommet not included.
T6068
T6067
polished PCV valve................ 19.99 ea
chrome PCV valve ................. 23.99 ea
We offer a full line of replacement valve cover
grommets. These are the correct grommets which insert
into the valve cover where the PCV or air cleaner to
valve cover elbow is inserted. Choose from a wide
variety of 6 cylinder or 8 cylinder grommets depending
on your year and model.
T4998
1971-75 250 ............................ 1.99 ea
T4998
1976
V8 (with A.C.) .......... 1.99 ea
G9095 1977-79 305, 350-L ................ 2.99 ea
T4998
1977-79 400, 403 .................... 1.99 ea
G9097 1978
350-X........................ 4.99 ea
G9097 1981
231-A........................ 4.99 ea
G9097 1989
3.8-7 ......................... 4.99 ea
D141615 1967-79 V8 ............................ 4.99 pr
G9095 1980-92 V8 ............................. 2.99 ea
FAC6801
FAC6901
A8700105
FAC7001
1967-69 OEM PCV Valve Hose
Excellent quality reproduction, thick walled hose with
90 degree bend as original. Clamps included. For use
with all applications.
K0058
1967-69 .................................. 13.99 ea
A8700106
1968-76 Air Cleaner Vent Tubes
Reproduction vent tubes designed to fit on the RH
valve cover. Available for 1968-76 models. Check the
listings below for correct tubes for your year and model.
FAC6801 1968-74 w/o Ram Air .......... 29.99 ea
A8700105 1969
TA w/Ram Air ....... 29.99 ea
FAC6901 1969-70 Ram Air ................. 25.99 ea
FAC7001 1971-72 Ram Air ................. 25.99 ea
A8700106 1971-76 TA w/shaker scoop 29.99 ea
1967-69 PCV Valve Hose Clamp
K
For use with PCV valve hose and power brake valve
hose. Correct style black pinch clamp.
K0051
1967-69 ..................................
.99 ea
DF1700
DF1701
Dual Flow Adjustable PCV Valve
Stock PCV valves are not designed to work with
modified high performance engines due to their altered
vacuum profiles. A mismatched PCV valve can cause
oil to push out of your breathers, cause oil leaks, or
contaminate your oil with piston blow-by gasses. Now
you can manage your crankcase pressure with this
fully adjustable 6061-T6 billet aluminum dual-flow
PCV valve. Once adjusted, the valve will provide
sufficient crankcase ventilation during both idle and
cruise. Valve fits 3/4" ID valve cover grommets and
3/8" ID PCV lines. An available adapter allows for
installation on 3/8" ID inline applications. PCV valve
set includes valve, vacuum gauge fitting, allen wrench,
and detailed instructions. Made in USA.
Note: Not intended for use on pollution-controlled vehicles.
DF1700
DF1701
DF1702
442
adjustable PCV valve ........... 128.99 ea
billet inline adapter .............. 21.99 ea
PCV valve rebuild kit........... 14.99 kit
T9358
G7229
Universal Crankcase Evacuation System
Specialty Grommets
This is a rubber oil baffle and breather grommet all in
one! The angled slots on the bottom and foam insert
stop oil seepage and act as a baffle. Installs on all
steel valve covers with 1.25" diameter breather holes.
Utility plug manufactured in rubber for valve covers
with 1.25" diameter holes. Will plug up the opening
hole when not using PCV or oil filler cap applications.
T9358
rubber baffle, each .................... 1.99 ea
T9359
rubber baffle, pair ..................... 2.99 pr
G7229 utility plug ................................ 1.99 ea
PCV Valves & Components
This universal crankcase evacuation system is designed
for high performance and racing applications. It
replaces the standard PCV to air cleaner system by
connecting to the exhaust system allowing exhaust
pressure to pull the gasses from the crankcase. Includes
two simple pipes with one-way valves that weld to
the header collectors and are connected to dual valve
cover breathers.
Note: Not for use on pollution controlled vehicles. For
valve covers with 1-1/4" holes. Hoses are not included.
20501
crankcase evacuation set ......
34.99 set
Oil/Breather Caps
66008
66014
96963
Chrome Valve Cover Breathers
Your choice of any of these aftermarket style valve cover
breathers. Each chrome breather and filler cap includes
the highest quality chrome available for each application.
Choose from “push-in”, “push-on” or “twist-on” styles
and breathers with or without 1/2" PCV tubes.
Circular Valve Cover Breathers
Without PCV Tube
66008 push-in, 3" dia., fits 1" i.d. ............ 4.99 ea
66035 push-in, 3" dia., fits 3/4" i.d.......... 6.99 ea
66009 push-on, 3" dia.............................. 5.99 ea
66010 twist-on, 3" dia. ............................ 5.99 ea
With PCV Tube
66017 push-in, w/1/2" PCV tube, 3" dia.,
for 7/8" i.d. grommet .................... 5.99 ea
T9242 push-in, w/1/2" PCV 2-3/4" dia.,
for 7/8" i.d. grommet ................... 7.99 ea
66012 twist-on, w/1/2" PCV , 3" dia. ...... 5.99 ea
Rectangular Valve Cover Breathers
66014 push-in with 7/8" i.d. grommet .... 7.99 ea
E4204
E4405
Edelbrock Valve Cover Breathers
Elite Series
Elite series breathers are die-cast aluminum with a
foam element. 3 styles are available. The side mount
and top mount breathers require drilling to install.
E4204
E4214
E4201
E4202
push-in style w/logo ................. 24.99 ea
push-in style w/o logo .............. 24.99 ea
90º side mount w/logo.............. 24.99 ea
30º top mount w/logo ............... 29.99 ea
Signature Series
Signature Series inscribed breathers come with rubber
grommets and match the Signature Series chrome valve
covers. Fit any 1-1/4" hole.
E4403
E4405
E4410
black powdercoat w/o nipple ...
chrome w/o nipple ....................
chrome w/90º nipple ................
Whether your oil cap is lost or broken or the engine
compartment just needs something to spice it up, these
oil caps are perfect. Fits most 1987-02 GM valve covers
with a screw in style cap. Available in chrome plated
plastic or polished and chrome plated billet aluminum.
96961
chrome plated plastic ............... 3.99 ea
96962
polished billet aluminum .......... 14.99 ea
96963
chrome plated billet aluminum 14.99 ea
1977-79 Trans Am Oil Filler Cap
Reproduction oil filler cap for 1977-79 Trans Am
models with 403ci Olds V8 engines.
TA4061 1977-79 Olds 403 .................. 16.99 ea
T4871
1977-79 Trans Am Valve Cover Breather
Reproduction valve cover breather for 1977-79 Trans
Am models with Oldsmobile 403 engine. This breather
element fits into a valve cover rubber grommet.
TA4041 1977-79 .................................... 12.99 ea
9.99 ea
9.99 ea
9.99 ea
1987-02 Screw In Oil Caps
Push In Chrome Breather Cap
Chrome plated oil breather caps in a variety of styles.
ST10061 - bottom
1967 OE Style Oil Breather Cap
ST10077
ST10099
1968-79 Replacement AC Oil Caps
Factory-correct reproduction AC oil fill caps. Chrome
cap features 3-spot welds and AC in center as original.
1253505 1968-79 chrome ..................... 34.99 ea
1253506 1968-79 FC2, paint to match . 34.99 ea
High quality Stant service replacement oil caps in a
variety of styles for small block engines.
Push-In Style for 1.25" Hole
ST10072 OIL ......................................... 1.99 ea
Twist-on Style with Tabs
ST10066 with ears .................................. 2.99 ea
ST10077 ENGINE OIL FILL ....................... 1.99 ea
1996-02 Plastic 1-17/32" Cam Twist
ST10099 with o-ring............................... 4.99 ea
1989-92 Plastic 1-9/32" Threaded
ST10105 ................................................. 3.99 ea
G7220
1967-02 Oil Filler Cap
1967 Chrome Oil Breather Cap
This is an exact reproduction of the original style valve
cover breather cap. This cap is chrome and has the
correct double dimples with the embossed AC-OIL
on top. This is a twist-on cap.
F654
1967
chrome ..................... 32.99 ea
AC Delco replacement oil filler cap for use with all
1967-02 Firebird models with closed emission engines.
This is a factory service replacement part which may
very in appearance from the original. Twist on style.
G7220 1967-69 ................................. 10.99 ea
G7220 1977-79 ................................. 10.99 ea
G7220 1982-84 305-H....................... 10.99 ea
G7220 1983
305-7 ....................... 10.99 ea
G9103 1985-86 2.5 ............................ 12.99 ea
G7220 1987-92 5.0, 5.7, 305-H ........ 10.99 ea
G11513 1998-02 5.7 LS1 .................... 7.99 ea
66018
66632
D141631
Chrome Oil Cap
Aftermarket chrome oil caps. Push-in style fits 1.25"
holes.
66018
push-in OIL....................... 3.99 ea
66632
twist-on no logo ................. 7.99 ea
D141631
twist-on GM....................... 14.99 ea
Oil/Breather Caps
443
This OE style oil cap is designed to fit 1967 6 and 8
cylinder applications. Available for models with or
without air. Choose from the twist-on or push-on styles.
Without California Emissions
ST10061 1967 6 cyl
push on .... 3.99 ea
ST10064 1967 326 & 400 twist on .... 3.99 ea
With California Emissions
ST10070 1967 6 cyl
push on .... 4.99 ea
ST10070 1967 326 & 400 push on .... 4.99 ea
ST10066
Replacement Oil Caps
1253505
ST10061 - top
ST10072
Comes with grommet to fit valve covers with 1.25"
hole. T9242 has 5/8" dia. PCV tube.
T4871
without PCV tube ..................... 6.99 ea
T9242
with PCV tube .......................... 7.99 ea
Valve Cover Gaskets/Hardware
VCS3001
1970-76 L6 Valve Cover Gasket
VCS3002
Aluminum Valve Cover Spacers
Aluminum valve cover spacers are used with any
Pontiac or small block Chevrolet valve cover to give
an additional 1" of rocker arm clearance.
Pontiac 301-455
VCS3001 polished aluminum ............. 110.99 pr
VCS3002 black ................................... 99.99 pr
VCS2001 polished aluminum ............. 89.99 pr
VCS2002 black ................................... 89.99 pr
66292R
Valve Cover Hold Downs & Wire Looms
These innovative valve cover hold downs are ideal to
prevent leakage for stamped small block Chevy valve
covers. They are easy to install and by applying even
pressure on the entire mounting flange, they’ll eliminate
the possibility of leaks. Hold downs with wire looms
also offer the advantage of attached spark plug wire
looms for an ultra-clean engine compartment. Your
choice of with or without looms in a variety of colors.
With Spark Plug Wire Looms
66292C chrome ...................................... 54.99 pr
66292B blue ........................................... 54.99 pr
66292K black ......................................... 54.99 pr
66292R red............................................. 54.99 pr
Without Spark Plug Wire Looms
66291C chrome ...................................... 34.99 pr
66291B blue ........................................... 34.99 pr
66291K black ......................................... 34.99 pr
Original GM replacement L6 gasket for use on the
1970-76 Firebird models with the power efficient engine.
G8380 1970-76 L6 ........................... 10.99 ea
Valve Cover Bolt Sets
F6510
Valve Cover Bolt Set
These reproduction valve cover bolts are for use on all
Pontiac engines. Available in chrome or zinc finish.
F6510 5/16"-18 x 9/16" chrome, 8 bolts 16.99 set
F6511 5/16"-18 x 21/32" zinc, 8 bolts ... 16.99 set
T9423 5/16"-18 x 1" chrome, 4 bolts..... 3.99 set
K
Chevrolet Valve Cover Gaskets
444
Valve Cover Gaskets
Valve Cover Hold Down Nuts
Various styles of chrome hold down bolts sold in sets
of 4 pieces.
T-Bar Wing Nuts
66005
3-1/2" tall, 1/4"-20 studs .......... 9.99 set
T4936
5" tall, 1/4"-20 studs................. 12.99 set
Chrome Wing Nuts
41371
3-1/2" tall, 1/4"-20 ................... 8.99 set
41381
3-1/2" tall, 5-16"-18 ................. 8.99 set
Deluxe Wing Nuts
66006
4" tall, 1/4"-20 studs................. 9.99 set
66036
4" tall, 5/16"-18 studs............... 13.99 set
Mini Nuts
66038
1/4"-20 studs ............................ 8.99 set
66650
stainless steel washers, 1/4"-20 9.99 set
T9641
T9067
G9240
Regulates the pressure on the valve cover and prevents
leakage. Available in mini-tab form, which is excellent
for use in tight clearance locations.
T9641
4 piece, 4-1/2" wide ................. 9.99 set
T9067
4 piece, mini-tab hold downs ... 5.99 set
G9240 6 cylinder, 6 required ............... 3.99 ea
56466SA
Original GM valve cover retaining hardware for
Firebird models with small block Chevrolet engines.
G8374 1977-86 1/4"-20 x 9/16" bolt ...
.99 ea
G8376 1977-86 spreader bar ................ 8.99 ea
G8377 1977-86 1/4"-20 x 1-1/4" stud .. 3.99 ea
G1649 1977-86 1/4"-20 nut w/washer . 4.99 ea
G8379
Center Hold Down Valve Cover Bolts
Valve cover gaskets are now available in your choice
of original cork material or a variety of aftermarket
materials.
Small Block 305-350 ci
G7221 1977-86 cork (GM) 2 req ........ 23.99 ea
T4323 1977-86 reproduction.............. 12.99 pr
80608 1987-92 rubber (OER) 2 req ... 19.99 ea
66650
G8374
141133
T4323
66038
Valve Cover Hold Downs
1977-86 Valve Cover Bolts
Pontiac 301-455 Valve Cover Gasket
66006
AR1757
These 8 piece bolt sets are offered for
Chevrolet small block engines in a
choice of chrome moly steel with
a black oxide finish or corrosionproof polished stainless steel. Choose between
conventional hex head bolts and washers or compact,
easy access 12-point designs. The heads feature a
wide base for better load distribution and sealing
(helps prevent those pesky gasket leaks), while the
compact head is easily accessed. All sets are shipped
with the required flat washers and come with 1/4"-20
bolts except for the center bolted valve covers.
For Cast Aluminum Covers
AR1753 black oxide 12-point ............. 11.99 set
AR4757 stainless
hex head ............ 19.99 set
AR4753 stainless
12-point ............. 22.99 set
For Stamped Steel Covers
AR4755 stainless
hex head ............ 18.99 set
AR4751 stainless
12-point ............. 21.99 set
For 350 Chevy Center Bolted Covers
AR4759 stainless
hex head ............ 29.99 set
AR4760 stainless
12-point ............. 29.99 set
G8377
These replacement valve cover gaskets are for use
with 301-455 V8 engines. Although these are not an
original GM gaskets, they will replace your original
exactly and offer years of use. Not for use with Super
Duty or Ram Air models.
T4334
.................................................. 19.99 pr
T4936
head detail
1967-97 Valve Cover Bolt Set
The Pontiac Arrowhead logo is stamped directly onto
the head of the bolts. They are available in decorative
chrome plated or polished stainless steel versions.
Pontiac
Chrome
56466CA 1967-79 5/16"-18 x 9/16" ...... 14.99 set
56463CA 1978-87 1/4"-20 x 1/2" .......... 9.99 set
Stainless Steel
56466SA 1978-87 1/4"-20 x 7/8" .......... 6.99 set
LT-1 engine
Stainless Steel
56403SA 1993-97 1/4"-20 x 3.5" .......... 19.99 set
Purchase a replacement set or individual bolt and
washer for center hold-down valve covers.
Note: All bolts and sets include washer.
Bolts w/Washer
141133 1987-97
G9101 1987
G9101 1988-92
G8378 1988-92
G9101 1993-97
Washers
G8379 1986-87
bolt set, repro ................ 14.99
...................................... 2.99
5.0-E.............................. 2.99
5.0-F (LB9), 5.7-8 (L98) 3.25
LT1 ................................ 2.99
set
ea
ea
ea
ea
5.0-F, 5.7 ....................... 4.89 ea
1977-79 Trans Am Valve Cover Bolts
Reproduction valve cover bolts for 1977-79 Trans Am
with 403ci Oldsmobile engine.
Note: Due to variations in Oldsmobile cylinder heads only
five bolts per valve cover may be required.
TA4034 1977-79
20 piece ................... 21.99 set
Performance Intake Manifolds
We offer several different styles of Edelbrock aluminum intake manifolds to fit a
variety of applications. Each style of manifold has characteristics that make it ideal
for the application for which it was intended. Years of design and testing in the area
of induction technology have given valuable insights into which characteristics
E2156
work best under what conditions. Whether you’re building a daily driver, ultra
high-performance street machine, or race car an Edelbrock intake manifold will
provide the power right where you want it.
E71564
E3711
1967-85 Pontiac/Olds Performer Intake Manifolds
1967-85 Pontiac/Olds Performer RPM Intake Manifolds
Performer manifolds are dual-plane, low-rise intake manifolds with a 180˚ firing order and
patented runner design that you won’t find on other brands. This patented design greatly
improves torque over a wide RPM range, especially off-idle through the mid-range. Throttle
response is excellent. Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles, and
RVs. There are EGR and non-EGR versions available for most GM V8s. Most performer intakes
are 50-State street legal when used with the correct carburetor and in the correct application.
Important: For Trans Am use stock carburetor for shaker hood clearance.
Performer RPM manifolds are dual-plane, high-rise intake manifolds with a 180˚ firing order
to produce incredible top end horsepower while retaining good throttle response. Their larger
plenums and runners match the free-flowing exhaust, and high lift cams and other modifications
of a high output engine. They are intended for high-performance street or competition engines
that run up to 6500 RPM. Not intended for emissions controlled vehicles. A Performer RPM
will give you the ultimate in street high-performance. Available with EnduraShine™ finish!
Important: Modifications necessary for vehicles with Trans Am Shaker Hood.
Performer Manifolds 1967-79 Pontiac 326-455 V8
Designed for 1967-79 326-455 Pontiac V-8s. (except Ram Air IV). Will not fit 265
or 301 Pontiac engines. Provides great throttle response and torque for performance
you can feel. E2156 is a stock replacement/street legal part for 1962-72 326, 350,
389, 400, and 455 with 4 bbl carburetors and without stock EGR. E3756 is a stock
replacement for 1973-79 326, 350, 389, 400 and 455 with 4 bbl carb and stock
EGR. This manifold will clear H.E.I. distributors. Use stock or replacement spread
bore carburetors only.
E2156
1967-79
non-EGR ............................................................ 274.99 ea
E3756
1967-79
w/EGR port........................................................ 309.99 ea
E8559
1967-79
intake manifold bolt set ..................................... 15.99 set
Performer Manifold 1967-85 Olds 350 & 403
Designed for street 1967-85 350 and 403 Oldsmobile V8s. This manifold is a stock
replacement/street legal part for 1967-72 350 and 403 V8s with 4 bbl and without
stock EGR or 1972-85 350 and 403 with stock EGR except 1976 with back pressure
EGRs. Includes EGR block-off plate for non-EGR applications. This manifold will
clear H.E.I. distributors. Use stock or replacement spread bore carburetors only.
E3711
1967-85
EGR/non-EGR ................................................ 294.99 ea
E8514
1967-79
intake manifold bolt set .................................. 24.99 set
Performer RPM Manifold 1967-79 Pontiac 326-455 V8
Designed for 1967-79 326-455 Pontiac V8s (except Ram Air IV). Will not fit 265
or 301 Pontiac engines. Provides maximum high RPM power while maintaining
good throttle response for street applications. Recommended for high performance
street or strip. This manifold will clear H.E.I. distributors. Carburetor pad will accept
square bore or spread bore carbs without an adapter.
E7156
1967-79
non-EGR, natural finish .................................. 269.99 ea
E71564 1967-79
non-EGR, EnduraShine™ finish ...................... 414.99 ea
E8559
1967-79
Performer RPM Manifold 1967-85 Olds 350 & 403
Designed for street 1967-85 350 and 403 Oldsmobile V8s. The Performer RPM
Olds manifold is a high-rise dual plane design with 180º firing order engineered
for maximum top-end horsepower while maintaining excellent throttle response.
Port flange has extra material above the runner for use with Olds 455 heads. This
manifold will clear H.E.I. distributors. Carburetor pad will accept square bore or
spread bore carbs without an adapter.
E7111
1967-85
non-EGR ......................................................... 304.99 ea
E8514
1967-79
This Performer RPM manifold and carburetor set for 389-455 Pontiacs makes it
easy to upgrade your induction system with the best combination of Edelbrock
performance in one simple box. The RPM Performer delivers the ultimate street
performance from 1500 to 6000 RPM. This set features show quality Edelbrock
manifold with Endurashine finished, Edelbrock Thunder AVS 800 CFM carburetor
with Endurashine finished, a chrome fuel inlet, high-quality intake gasket set,
Gasgacinch gasket sealer, intake bolt set and carburetor stud set.
Important: Modifications necessary for vehicles with Trans Am Shaker Hood.
E20564
EnduraShine finish.......................................................... 1124.99 set
Pontiac P-65 Dual-Quad Manifold
Designed for 1965-79 326-455 Pontiac V8s. (except Ram Air V) These P-65 dual
quad manifolds are a direct reproduction of the original Edelbrock Pontiac P-65
manifold, delivering classic edelbrock performance from off-idle to 5,500 rpm.
Bosses at the rear of the manifold accommodate brake booster, accessory brackets,
and throttle linkage. The flanges match the ports on the Edelbrock Performer RPM
Pontiac cylinder heads for proven performance.
E5450
Pontiac P-65 non-EGR ..................................................... 381.99 ea
E54501
Pontiac P-65 non-EGR, polished ...................................... 584.99 ea
445
E5450
389-455 Pontiac Performer RPM Manifold
Intake Manifolds
E27014
E2104
Edelbrock Performer
Dual-plane, low-rise intake manifolds with a 180˚ firing
order and patented runner design. Improves torque over
a wide RPM range, especially from off-idle through
the mid-range. There are EGR and non-EGR versions
available for most GM V8s, and most intakes are 50-state
street legal when used with the correct carburetor and
on the correct application.
Edelbrock Performer EPS
E75014
Runner design that is tuned for peak power around
3500 RPM on a Chevrolet 350 V8, and has a solid
power range off idle to 5500 RPM.
Important: Not for 1987 and later cast iron Chevrolet Bow
Tie cylinder heads. Will fit 1987 and later stock aluminum
cylinder heads.
Natural Finish
E2701
non-EGR ................................. 144.99 ea
Endurashine Finish
E27014 non-EGR ................................. 274.99 ea
1977-86 Chevrolet Small Block
Natural Finish
E2101
non-EGR ................................. 174.99 ea
E3701
with EGR................................. 219.99 ea
1987-95 Small Block w/Cast Iron Heads
Natural Finish
E2116
non-EGR ................................. 219.99 ea
Endurashine Finish
E21164 non-EGR ................................. 369.99 ea
Important: Will also fit Edelbrock E-Tec heads.
Important: Not for 1987 and later stock aluminum cylinder
heads. Will not fit Chevrolet Bow Tie or LT1 cylinder heads.
This award winning design incorporates the same race
winning technology that’s been used by Edelbrock
competition intakes for years. The air-gap design features
an open air space that separates the runners from hot
engine oil, resulting in a cooler, denser intake charge
that delivers more power. RPM Air-Gap manifolds are
modeled after Performer RPM intakes for street power
from 1500 to 6500 RPM.
Natural Finish
E7501
non-EGR ................................. 261.99 ea
Endurashine Finish
E75014 non-EGR ................................. 394.99 ea
1996-up Small Block w/Iron Vortec Heads
Important: Will also fit 1987 and later stock aluminum cylinder
heads. Will not fit Chevrolet Bow Tie cast iron cyl. heads
Natural Finish
E2104
non-EGR ................................. 219.99 ea
E3706
with EGR................................. 259.99 ea
Edelbrock Performer RPM Air-Gap
Natural Finish
E7516
non-EGR ................................. 299.99 ea
Endurashine Finish
E75164 non-EGR ................................. 424.99 ea
E27161
Performer EPS Vortec Manifold
Available for small-block Chevrolet with Vortec or
Edelbrock E-Tec cylinder heads, the performer EPS
dual-plane manifold is optimized to deliver superior
performance with Edelbrock square-bore Performer
Series or Thunder Series AVS carburetors. The runner
design is “tuned” for peak torque around 3500 rpm on
a 350-inch engine and it’s ideal for off-idle through
5500 rpm. Dyno tests showed gains averaging 5+
ft/lbs. of torque from 3000 to 4500 rpm for more
performance where you need it most. Match with
a dependable Edelbrock square-bore carburetor for
maximum performance gains.
E20684
Natural Finish
E27161 Vortec, natural finish ............... 229.99 ea
Endurashine Finish
E27164 Vortec w/EnduraShine finish ... 354.99 ea
E7101
K
Edelbrock Performer RPM
Dual-plane, high-rise intake manifolds with a 180˚
firing order to produce incredible top end horsepower
while retaining good throttle response. Their larger
plenums and runners match free-flowing exhaust, and
high lift cams and other modifications of a high output
engine. They are intended for high-performance street
or competition engines that run up to 6500 RPM. Not
for emissions controlled vehicles.
Important: Will fit cast iron Chevrolet Bow Tie cylinder
heads, but will not fit 1987 and later cast iron cylinder heads.
Natural Finish
E7101
non-EGR
square bore ........ 199.99 ea
E7104
non-EGR
spread bore ........ 221.99 ea
Endurashine Finish
E71014 non-EGR
square bore ........ 341.99 ea
Natural Finish
E7116
non-EGR
Endurashine Finish
E71164 non-EGR
446
.......................... 229.99 ea
.......................... 371.99 ea
RPM Air-Gap manifolds are ideal for street
performance from idle to 5500 rpm. The full set up
provides everything you need to run dual quads,
including an RPM Air Gap Dual Quad intake manifold
for oval port heads, (2) 500 CFM Thunder Series
AVS carburetors (one manual choke, one electric
choke), throttle linkage, fuel line and intake gasket
set for a complete installation. Manifold also available
separately. Choose from satin cast finish or chrome-like
Endurashine finish.
Note: Complete set-ups are shipped
overweight. No further discounts apply.
E2601
Complete Set Up
Edelbrock Performer Air-Gap
This award winning design incorporates the same race
winning technology that’s been used by Edelbrock
competition intakes for years. The air-gap design
features an open air space that separates the runners
from hot engine oil, resulting in a cooler, denser intake
charge that delivers more power. Performer Air-Gap
manifolds are ideal for street performance from idle
to 5500 RPM.
Natural Finish
E2601
non-EGR ................................. 251.99 ea
Endurashine Finish
E26014 non-EGR ................................. 384.99 ea
Edelbrock RPM Dual-Quad Air Gap
1977-86 Small Block
E2025
265-400 natural .................. 1219.99 set
E20254 265-400 Endurashine ......... 1544.99 set
E2026
E20264
262-400 natural .................. 1231.99
265-400 Endurashine ......... 1574.99
Manifold Only
E7525
265-400 natural .................. 331.99
E75254 265-400 Endurashine ......... 499.99
set
set
ea
ea
E7526
E75264
265-400 natural ..................
265-400 Endurashine .........
331.99 ea
499.99 ea
Intake Manifolds
1969-71 Ram Air Intake Crossover
14420
1969 Ram Air Intake Manifold Set
This intake manifold set features a reproduction of the
factory aluminum intake manifold that came on 1969
Firebird / Trans Am cars with 400 Ram Air IV engine.
It will also work on all 1965-79 Pontiacs with a 326,
350, 389, 400, 428 and 455 engines, but is correct
for 1969. It has cast number of 9796614 and has the
correct “W” snowflake logo which was used by Winters
foundry. Set includes one aluminum intake manifold,
one cast iron exhaust crossover and the correct factory
two-piece crossover heat shield which insulates the
intake manifold from heat produced by the crossover.
1969-70 400 Ram Air IV Intake Manifold
This is a reproduction of the factory aluminum intake
manifold that came on 1969-70 Firebird / Trans Am cars
with 400 Ram Air IV engine. It will also work on all
1965-79 Pontiacs with a 326, 350, 389, 400, 428 and
455 engines. It has a cast number and the correct “W”
snowflake logo which was used by Winters foundry.
Reproduction Ram Air intake crossover used on
1969-71 Pontiac models equipped with the optional
Ram Air package. This air intake crossover mounts
between the heads and under the intake to provide
heat for the carburetor choke thermostat coil. This
cast iron crossover is used on all Ram Air aluminum
or H/O intakes.
14403
1969-71 ................................... 156.99 ea
Note: Use intake manifold gasket # 1233.
14420
14421
1969
1970
cast # 9796614 ........... 359.99 ea
cast # 9799084 ........... 359.99 ea
14424
1969 ....................................... 569.99 set
1969-71 Ram Air and H/O Crossover Cover
This is a reproduction of the cover that fits all Pontiac
400 or 455 motors with aluminum intake and a cast iron
crossover. This cover surrounds the intake crossover
and directs heat away from the intake manifold.
F871
1969-71 ................................... 109.99 set
14422
1970 Ram Air Intake Manifold Set
This intake manifold set features a reproduction of
the factory aluminum intake manifold that came on
1970 Firebird / Trans Am cars with 400 Ram Air IV
engine. It will also work on all 1965-79 Pontiac 326,
350, 389, 400, 428 and 455 engines, but is correct
for 1970. It has cast number of 9799084 and has the
correct “W” snowflake logo which was used by Winters
foundry. Set includes one aluminum intake manifold,
one cast iron exhaust crossover and the correct factory
two-piece crossover heat shield which insulates the
intake manifold from heat produced by the crossover.
14425
1970 ....................................... 569.99 set
14423
1971-72 455 H/O Intake Manifold
This is a reproduction of the factory aluminum intake
manifold that came on 1971-72 Firebird / Trans Am cars
with 455 H/O engine. It will also work on all 1965-79
Pontiac 326, 350, 389, 400, 428 and 455 engines. It
has a cast number and has the correct “W” snowflake
logo which was used by Winters foundry.
14422
14423
1971
1972
cast # 483674 ............. 359.99 ea
cast # 485640 ............. 359.99 ea
1967-79 Intake Manifold Gaskets
This is a reproduction of the original intake manifold
gasket Pontiac used on V8 engines from 1967-79. This
gasket can be used on 326-455 engines.
1233
1967-79 V8 ............................ 24.99 set
1971 H/O Intake Manifold Set
This intake manifold set features a reproduction of the
factory aluminum intake manifold that came on 1971
Firebird / Trans Am cars with 455 H/O engine. It will
also work on all 1965-79 Pontiac 326, 350, 389, 400,
428 and 455 engines, but is correct for 1971. It has cast
number of 483674 and has the correct “W” snowflake
logo which was used by Winters foundry. Set includes
one aluminum intake manifold, one cast iron exhaust
crossover and the correct factory two-piece crossover
heat shield which insulates the intake manifold from
heat produced by the crossover.
14426
1971 ....................................... 569.99 set
1997-04 BBK LS1 & LS6 Intake Manifold
Boost horsepower and low end torque with this intake
manifold from BBK. Designed for LS1 and LS6
engines, this intake improves the Z06 Corvette intake
design with an 85mm straight through throttle inlet
with rounded low-restriction intake runners to allow
an 18-24 horsepower increase on a base LS1 engine.
Features a titanium powder coat finish and is available
in sets with BBK Power Plus series 80mm throttle
bodies with cable or electronic throttle controls. Uses
factory rubber o-ring gaskets and includes mounting
hardware and instructions.
BK5004 1997-04 manifold only .......... 499.99 ea
BK5005 1997-04 w/cable throttle body 799.99 set
BK5006 1997-04 w/elec. throttle body . 799.99 set
43230
1977-97 Intake Manifold Gaskets
High-quality intake manifold gaskets for V6 and small
block engines. Produced by OE manufacturers from
premium non-asbestos materials to meet or exceed
original specifications.
Note: For Chevrolet/GM corporate engines only.
V6 Models
43150 1982-86 2.8L
41520 1985-95 2.8-3.4L
Small Block Models
43221 1977-86 305-350 ci
43226 1985-92 305-350 ci
43230 1987-92 305-350 ci
43670 1993-97 350 ci LT1
Carb ........ 11.99 set
FI ............ 12.99 set
................
TPI..........
TBI .........
................
Reproduction Intake Manifolds
11.99
28.99
14.99
15.99
set
set
set
set
447
BK5005
Intake Manifold Components
1967-81 Firebird Vacuum Check Valve
PY375
PY376
1968-71 Thermostatic Vacuum Switch
Reproduction thermostatic vacuum switch for various
1968-71 Firebird models with ported vacuum emissions
system. This switch opens and closes vacuum ports at
specific coolant temperatures to control the distributor's
vacuum advance and retard systems and controls the
vacuum operated shift modulator on some automatic
transmission models.
5 Port Vacuum Switch
PY375 1968 AT/MT 4bbl................. 64.99 ea
PY375 1969 AT................................ 64.99 ea
PY375 1971 AT/MT HO .................. 64.99 ea
3 Port Vacuum Switch
PY376 1969 switch MT ................... 61.99 ea
Reproduction vacuum
check valve for 1967-81
Firebird and Trans Am
models equipped with AC.
Check valve mounts on the
vacuum tree on the intake manifold.
TA4067 1967-81 .................................... 13.99 ea
1970-78 Trans Am Engine Check Valve
Reproduction engine
check valve for 1970-78
Trans Am models. This
valve prevents vacuum from
escaping the booster when the
engine shuts off, allowing you to
stop safely in the event of an unexpected stall.
1253508 1970-78 .................................... 11.99 ea
1967-77 Vacuum Plugs
Vacuum plugs for 1967-77
Pontiac models. Available in
3/16" and 1/8".
TA4063 1967-77 4 piece 3/16"............
TA4064 1967-77 4 piece 1/8"..............
3.99 set
3.99 set
1969-70 RA IV And HO Crossover Bolts
These bolts replace missing or damaged crossover bolts
on 1969-70 RA IV and HO Pontiac engines. Bolt sets
come complete with the correct markings on the bolts
and the correct 1/4" thick washers.
A8700189 1969-70 ................................ 17.99 set
1970-72 Ram Air IV And HO Intake Bolt Set
Correct bolt set for aluminum intake manifolds installed
on 1970-72 Pontiac RA IV and HO models. This
set contains the correct style hardware with factory
markings for mounting the intake manifold the cast
iron crossover tube.
A8700188 1970-72 ................................ 37.99 set
1968-81 Valley Pan PCV Grommet
A8100100
1968-71 Manifold Vacuum Switch Hoses
These manifold vacuum switch hose sets are designed
for ported vacuum emissions systems. These hoses
feature correct colored stripe markings to provide
an authentic replacement for worn or missing hoses.
Includes installation instructions.
A8700100 1968 4 bbl V8 AT/MT ..... 49.99 set
A8700101 1969 HO V8 AT/MT ........ 35.99 set
A8700101 1971 HO V8 AT/MT ........ 35.99 set
The valley pan PCV grommet
for 1968-81 Pontiac engines was
discontinued by GM long ago.
Aftermarket grommets were often
incorrectly sized and made from
the wrong type of rubber. This
new reproduction is available in
the correct size and the correct rubber that won't
disintegrate, soften, or swell.
A8700195 1968-81 ................................ 4.99 ea
K
1976 Intake Vacuum Hose Set
1253524
Trans Am Super Duty valley
pan plug. This black plug is
required to close-off the hole
in the valley pan of Trans Am
Super Duty engines.
1253512
1973-74 ................................ 21.99 ea
Reproduction
intake manifold
plugs for 1977-79
Trans Am with
403ci Oldsmobile
engine.
TA4029 1977-79 4 piece set ................
8.99 set
1977-79 Trans Am Engine Lift Bracket
Reproduction engine lift bracket
installed on the assembly line
on the 403ci engine of all
1977-79 Trans Am models
to help maneuver the engine
into position while building the car.
TA4030 1977-79 .................................... 17.99 ea
448
1977-79 Trans Am Intake Manifold Bolts
Reproduction intake manifold bolt set for 1977-79
Trans Am models with 403ci Oldsmobile V8 engine.
This 24-piece set will mount your intake as original.
TA4015 1977-79 24 piece set .............. 41.99 set
1967-79 Valley Pan Bolts
These bolts secure the valley pan to the engine block
on 1967-79 Pontiac engines. Bolts feature the correct
head markings and colors. Sets include flat washers.
A8700196 1967-79 ................................ 8.99 set
1978-97 Intake Manifold Bolt Sets
1253519
1967-72 Intake Manifold Fitting
Intake manifold to air cleaner vacuum fitting for Pontiac
models. This fitting mounts on the front of the manifold
and allows the air cleaner vacuum pod to open under
vacuum to allow warm air into the air cleaner to warm
up the engine faster and to close at no vacuum.
1253524 1967
all ............................. 8.99 ea
1253519 1968-72 V8, all ...................... 14.99 ea
This manifold bolt set contains the correct bolts, nuts
and washers to mount the manifold and accessory
brackets on 1970-79 Pontiac engines. All bolts feature
correct factory style markings.
A8700190 manifold bolt set .................. 25.99 set
A8700191 studded manifold bolt w/nut 3.99 ea
1973-74 Super Duty Valley Pan Plug
1977-79 Trans Am Intake Manifold Plugs
This vacuum hose set fits all Pontiac V8 engines with
a 4 barrel carburetor and includes all the hoses for the
intake and the carburetor. They are pre-cut to the proper
length and color striped as original.
PYE76 1976 .......................................... 84.99 set
A8700190
1970-79 Intake Manifold Bolt Set
1969 Ram Air IV Intake Manifold Bolt Set
Factory-correct Firebird Ram Air IV intake manifold
stud/nut set. Ram Air vehicles with the aluminum
intake and the cast iron crossover used large washer
and flat head bolt to bolt the crossover in.
1253534
1969 Ram Air IV .............. 26.99 set
Intake Manifold Components
These bolts have a Pontiac Arrowhead logo stamped
directly onto the head of the them. Available in decorative
chrome plated or polished stainless steel versions.
Chrome
56469CA 1978-87 Chevy small block... 21.99 set
56402CA 1993-97 LT-1 engine ............. 24.99 set
Stainless Steel
56469SA 1978-87 Chevy small block... 14.99 set
56402SA 1993-97 LT-1 engine ............. 19.99 set
Cylinder Heads
E60759
1977-86 Small Block Performer Heads
E60579
1967-79 Pontiac V8 Performer RPM Heads
Patterned after the 1969-70 Ram Air IV Pontiac cylinder head. Produces outstanding
horsepower with excellent low speed torque and throttle response. 87cc combustion
chambers are designed to maximize performance with low octane fuel and streetable
compression ratios. The 72cc version is for higher compression engines. 5/8" deck
for durability and head gasket retention.
Important: Bolt set # E8556 fits Edelbrock heads manufactured before 3/15/02, #E8549 fits
Edelbrock heads manufactured after 3/15/02.
*50-state legal (E.O. #D-215-33)
E60579* 1967-79 389-455, 87cc ...................................................... 2089.99 pr
E60599 1967-79 389-455, 72cc ...................................................... 2089.99 pr
E8556 1967-79 Pontiac head bolt set (for Edelbrock heads only) 121.99 set
E8549 1967-79 Pontiac head bolt set (for Edelbrock heads only) 129.99 set
Designed for 1977-86 small block Chevys, these heads have the same powerful
design and combustion chambers as the straight plug Performer RPM heads plus
an exhaust crossover passage for emissions equipment compatibility. These are
50-state street legal heads. Performer heads with 64cc combustion chambers improve
performance and retain stock compression ratio on 1970 and earlier small blocks.
Hardened pushrods required.
Important: When using hot air choke carburetors and Performer manifolds with these heads,
choke kit E1932 is required. When using stock rockers on these heads .100" longer pushrods
are required. These heads may not be used on engines with less than 4" bore except with
cams having less than .450" valve lift.
60759
E60759
60909
E60909
E1932
E8550
1977-86
1977-86
1977-86
1977-86
1977-86
1977-86
70cc chambers ..................................................... 739.99
70cc chambers ..................................................... 1379.99
64cc chambers ..................................................... 739.99
64cc chambers ..................................................... 1389.99
choke kit .............................................................. 54.99
SB head bolt set (for Edelbrock heads only) ....... 119.99
ea
pr
ea
pr
set
set
E60519
E60719
1967-79 Oldsmobile V8 Performer RPM Heads
Designed for non-emission high performance Olds V8. The 77cc combustion
chambers increase the quench area for a more efficient burn, outstanding horsepower,
and torque. Heads are assembled with stainless steel valves, hardened ductile iron
valve seats, phosphor bronze guides. The valvetrain has been upgraded from the
factory pedestal mount system to an ARP 7/16” screw in stud and 3/8” guideplates
for increased valvetrain stability. High-velocity, factory location ports feature 188cc
intake ports and 106cc raised-floor exhaust ports for more flow. Requires Edelbrock
E7111 intake manifold. Port matching required.
Important: Aftermarket 7/16" stud rocker arms and 3/8"
hardened pushrods are required.
E60519 1967-79 350-403, 77cc ..................................................... 1804.99 pr
E8558 1967-79 Oldsmobile head bolt set (Edelbrock heads only) 124.99 set
1977-86 SB Performer RPM Heads
Designed for non-emissions 1977-86 small block Chevys. Performer RPM heads with
64cc combustion chambers improve performance and retain stock compression ratio
on 1970 and earlier small blocks. Available in straight plug configuration to clear all
types of exhaust headers or in angled plug configuration. Hardened pushrods required.
Important: When using stock rockers on these heads .100" longer pushrods are required.
These heads may not be used on engines with less than
4" bore except with cams having less than .450" valve lift.
60739
E60739
60899
E60899
60719
E60719
60999
E60999
E8550
1977-86
1977-86
1977-86
1977-86
1977-86
1977-86
1977-86
1977-86
1977-86
70cc chambers/straight plugs .............................. 719.99
70cc chambers/angled plugs ................................ 719.99
SB head bolt set (for Edelbrock heads only) ........ 119.99
ea
pr
ea
pr
ea
pr
ea
pr
set
Designed for 1967-79 389, 400, 421, 428 and 455 cid V8 Pontiac engines with a
4.060" or larger bore. Available in three dual quench combustion chamber sizes,
including 65cc, 72cc, and 87cc; the 72cc combustion chambers provide a 9.5:1
compression ratio when used in conjunction with flat-top pistons. Features: 2.11"
intake and 1.66" Exhaust valve sizes, 1.77" valve will fit in the exhaust seat insert.
Fully CNC Ported 72cc or 87cc Combustion Chamber, or As-Cast 65cc Chamber.
Heads sold individually.
Important: These heads are for 4.060" and larger bore sizes; 350 c.i.d. engine may require
notching the block for valve clearance. Three head bolt bosses are raised higher than the
standard D-port heights and will require head bolt kit #E8561 to install these heads. The
E61539 heads are available as bare heads only.
E61539
E61599
E61579
E8561
1967-79
1967-79
1967-79
1967-79
65cc bare head only .............................................
72cc complete head .............................................
87cc complete head .............................................
Pontiac head bolt set (for Edelbrock heads only)
899.99
1199.99
1199.99
124.99
ea
ea
ea
set
60859
1987-95 SB Performer Centerbolt Heads
Designed for 1987-95 5.7L Chevy engines (except LT-1, LT-4, and LT-5) originally
equipped with centerbolt valve covers and the 1987 and later intake manifold bolt
pattern. The high velocity intake runner is designed to work with either T.B.I. or
T.P.I. systems. The 60cc combustion chambers maintain stock compression ratio
when used with the recommended gaskets. These are 50-state street legal heads.
Hardened pushrods required Available in straight plug configuration only.
Important: When using stock rockers on these heads .100" longer pushrods are required.
These heads may not be used on engines with less than
4" bore except with cams having less than .450" valve lift.
60859 1987-85 60cc chambers ..................................................... 771.99 ea
E60859 1987-85 60cc chambers ..................................................... 1424.99 pr
E8550 1987-85 SB head bolt set (for Edelbrock heads only) ....... 119.99 set
Edelbrock Cylinder Heads
449
E61599
1967-79 Performer Heads w/D-Port Exhaust
Comp Cams for Pontiac Engines
High Energy™ Cams for Your Daily Driver!
All High Energy™ designs are totally streetable cams. They will produce 10 to 30% more
power than a stock cam throughout the RPM range. Each cam has a particular RPM range
in which it works best. By selecting the cam that best suits your driving needs, exceptional
power increases can be expected.
High Energy™ Cams work great for everyday driving without the “bad” side effects
normally found with other cams. High Energy™ cams produce more power, are more
efficient, and do not affect the engine’s idle characteristics to the point of making your
car undriveable.
High Energy™ Cams will not affect any vacuum or power accessories such as power
brakes, air conditioning or steering.
Important: Mild Street™ & Highway Hauler™ cams may be used with stock valve springs and lifters.
However these components must be in good operating condition.
In order to prevent engine damage, the Hot Street Performance™ cam must be used with matching set
of valve springs from COMP CAMS®. In order to protect your camshaft warranty and for maximum
performance benefit, we recommend replacing stock valve springs and lifters with a matched set
manufactured by COMP CAMS®.
Note: High Energy™ cams are legal only for off-highway use (except in California or states that have
adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/
motor vehicle engines (pre-1966 domestic vehicles certified to California standards, pre-1968 domestic
vehicles certified to federal standards). No further discounts apply.
complete set
Mild Street™ 301-400ci
Highway Hauler™ 455ci
Hot Street™ Performance
Ideal for 301-400ci small block engines that require
good low speed torque. A great “all around” cam for the
daily driver. This is the best cam for the 301ci engine.
Works with most stock valve train components. OK
to use in applications with overdrive transmissions
and high gear ratios. Operating range between 800
to 4800 RPM. Features .425 valve lift, 252° duration.
Camshaft only
222060A ............................................... 129.99 ea
Cam & lifters-includes camshaft, lifters, instructions
& decals.
222060B ............................................... 204.99 set
Small set-includes camshaft, lifters, timing chain and
gear set, instructions, assembly lube, & decals.
222060C ............................................... 234.99 set
This cam provides exceptional power and a gas mileage
increase, especially on the highway. Good idle and
strong mid-range torque coupled with an excellent
throttle response make this cam a good choice for the
highway driven 455. Good power for the 326-400 as
well. Operating range between 1200 to 5200 RPM.
Features .440 valve lift, 260° duration.
Camshaft only
222061A ............................................... 129.99 ea
& decals.
222061B ............................................... 204.99 set
gear set, instructions, assembly lube & decals.
222061C ............................................... 234.99 set
Complete set-includes camshaft, lifters, chain set, valve
springs, valve spring retainers, valve locks, valve stem
seals, assembly lube, instructions & decals.
222061D ............................................... 349.99 set
Our most versatile cam, it is a great high performance
cam for 326-455ci engine. With its noticeable idle
and great all around power, it is ideal for daily driven
performance vehicles. Provides major power increases
with stock converter. Operating range between 1500
to 5500 RPM. Features .454 valve lift, 268° duration.
Camshaft only
222062A ............................................... 129.99 ea
& decals.
222062B ............................................... 204.99 set
gear set, instructions, assembly lube & decals.
222062C ............................................... 234.99 set
222062D ............................................... 399.99 set
222060D ............................................... 349.99 set
K
Magnum™ Cams For Your High-Performance Driven Street Machine!
The Magnum™ cam is a great cam for high performance driving in street
machines. Provides 30-70% more horsepower and a rough and ready to rumble
idle. This is the largest cam you can use with a stock torque converter. The
Magnum™ will not affect power accessories, but should be used with headers
and a 4 BBL. carburetor. This is the perfect cam for cruising. In order to
protect your camshaft warranty and for maximum performance benefit, we
recommend replacing lifters with a matched set manufactured by COMP
CAMS®. Important: Valve springs must be replaced with the set recommended for the cam.
The use of stock or incorrect springs could cause severe engine damage!
Note: Magnum™ cams are legal only for off-highway use (except in California or states that have
adopted California emission standards), racing use or for use on pre-emission controlled motor
vehicles/motor vehicle engines (pre-1966 domestic vehicles certified to California standards,
pre-1968 domestic vehicles certified to federal standards).*May require machining of cylinder
heads. No further discounts apply.
Pro Street™ Pontiac
Magnum™ cams are specifically designed for the street enthusiast looking for more power with that pro-street sound. For 326-455ci engines. Hydraulic flat tappet cam has an
operating range of between 1800 to 5800 RPM. For use with lower gear ratios. Provides a mild rough idle and good mid range torque. Features .470 valve lift, 270° duration.
Camshaft only
222063A
........................................................................................ 139.99 ea
Cam & lifters-includes camshaft, lifters, instructions & decals.
222063B
........................................................................................ 211.99 set
450
Comp Cams®
Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly
lube & decals.
222063C
........................................................................................ 259.99 set
Complete set-includes camshaft, lifters, chain set, valve springs, valve spring retainers,
valve locks, valve stem seals, assembly lube, instructions & decals.
222063D* ........................................................................................ 414.99 set
Xtreme Energy™ for Street or Strip!
Xtreme Energy™ cams are
COMP CAMS® newest
series of hydraulic cams.
They are designed to take
advantage of the latest
improvements in valve
train components and the
newest developments in
camshaft design. Xtreme
Cams can be used in
any street or street/
strip application where
both throttle response
and top end horsepower
are desired. Increases
horsepower from 20-70%
over stock.
Factory Muscle!
During the heyday of the factory muscle car, Pontiac
produced what they thought would be the perfect
muscle cars. Model/engine designations like Formula
400, Ram Air, and Trans Am represented the ultimate
in trim and performance. But, Pontiac also knew
that not everyone could afford one of these factory
prepared monsters. Consequently, 80% of the muscle
cars offered were equipped with more practical and
economical powerplants. You can give your stocker a
dose of factory muscle with a Muscle Car™ cam from
COMP CAMS®. Designed to replicate the original
GM cams of the era, The Muscle Car™ cams produce
the power and performance your car missed out on.
Important: Because these cams
use aggressive lobe designs, it
is imperative that valve springs,
valve locks, retainers, pushrods,
lifters, rockers and other related
components are matched to the
camshaft. We do not recommend
the use of stock valve train
components with Xtreme
small set
Energy™ cams.
Note: Xtreme Energy™ cams are
legal only for off-highway use
(except in California or states
that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor
vehicle engines (pre-1966 domestic vehicles certified to California standards, pre-1968 domestic vehicles certified to federal
standards). No further discounts apply.
Street/Strip™ Pontiac
Xtreme Energy™ cams can be used in any street or strip application where both throttle response and top end
horsepower are desired. For 326-455ci engines. Hydraulic flat tappet cam has an operating range of between
1300 to 5500 RPM. Good mid-range with noticeable idle. Features .462 intake valve lift, .470 exhaust valve lift,
262° intake duration, 270° exhaust duration.
Camshaft only
222064A
........................................................................................................................................ 139.99 ea
Xtreme Street/Strip™ Pontiac
Xtreme Energy™ cams can be used in any street or strip application where both throttle response and top end
horsepower are desired. For 326-455ci engines. Hydraulic flat tappet cam has an operating range of between
1600 to 5800 RPM. Great cam for street machines. Largest cam for stock torque converter. Features .477 intake
valve lift, .480 exhaust valve lift, 268° intake duration, 280° exhaust duration.
Camshaft only
222065A
........................................................................................................................................ 139.99 ea
222065B
........................................................................................................................................ 211.99 set
Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly lube & decals.
222065C
........................................................................................................................................ 259.99 set
Complete set-includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem
222065D
........................................................................................................................................ 419.99 set
Factory 400 or 455ci
Known to GM as part# 9794041, this is COMP CAMS®
version of the hydraulic cam that provided 366HP to
the 400 in 1968. It was also used in the 400ci in 1969,
providing 345/370HP and the 1970 455/370HP. Fits
326-455ci engines. Features .516 lift with 230° intake
& 240° exhaust duration. Important: Valve springs must
be replaced with the set recommended for the cam. The use of
stock or incorrect springs could cause severe engine damage!
Note: Depending upon the cylinder heads that you are using,
some minor machining may be necessary to fit the dual valve
springs & valve stem seals to the cylinder head. No further
discounts apply.
Camshaft only
222070A ................................................ 129.99 ea
& decals.
222070B ................................................ 204.99 set
Small set-includes camshaft, lifters, double roller
timing chain and gear set, instructions, assembly
lube & decals.
222070C ................................................ 237.99 kit
222070D ................................................ 431.99 kit
Comp Cams®
451
222064B
........................................................................................................................................ 214.99 set
Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly lube & decals.
222064C
........................................................................................................................................ 244.99 set
Complete set-includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem
222064D
........................................................................................................................................ 359.99 set
Your Choice of Four Convenient Sets to Meet Your Small Block Chevrolet Engine Needs!
Important: On Chevrolet small block applications, High Energy™ Cams may be used with stock
valve springs and lifters. However these components must be in good operating condition. In
order to protect your camshaft warranty and for maximum performance benefit, we recommend
replacing stock valve springs and lifters with a high performance set from Classic Industries.
A - Camshaft Only
B - Cam and Lifters
C - Small Set
D - Complete Set
The camshaft only set includes camshaft.
instructions, assembly lube and decals
Order the cam and lifter set to add a
matched set of lifters to your camshaft
Order the small set for cam and
lifter set plus timing chain and gear
Complete set includes cam, lifters,
timing chain & gear valve springs and
retainers, valve locks, valve stem seals
High Energy™ Cams for Your Daily Driver!
All High Energy™ designs are totally streetable cams. They will produce 10 to 30%
more power than a stock cam throughout the RPM range. Each cam has a particular
RPM range in which it works best. By selecting the cam that best suits your driving
needs, exceptional power increases can be expected. High Energy™ Cams work
great for everyday driving without the “bad” side effects normally found with other
Item #
222002
222003
222004
Application
305-350 ci
305-350 ci
305-350 ci
RPM Range
800-4800
1200-5200
1500-5500
Adv Dur
252˚/252˚
260˚/260˚
268˚/268˚
Lift
.425"
.440"
.454"
cams. High Energy™ cams produce more power, are more efficient, and do not affect
the engine’s idle characteristics to the point of making your car undriveable. High
Energy™ Cams will not affect any vacuum or power accessories such as power
brakes, air conditioning or steering.
A - Camshaft
119.99 ea
119.99 ea
119.99 ea
B - Cam & Lifters
184.99 set
184.99 set
184.99 set
C - Small Set
219.99 set
219.99 set
219.99 set
D - Complete Set
319.99 set
319.99 set
334.99 set
COMP CAMS for your High Performance Street Machine!
K
Factory Muscle Cams Replicate Original GM Cams of the Era!
Give your stocker a dose of factory muscle with a Muscle Car™ cam from COMP
CAMS®. Designed to replicate the original GM cams of the era, The Muscle Car
Cams™ produce the power and performance your car missed out on. Each set
includes camshaft, lifters, assembly lube, instructions & decals.
300hp/350ci Factory Muscle Car Cam
Known to GM as part# 3896929, this is the hydraulic cam that provided 275/300HP
to the 327 from 1965-68. It was also used from 1967-69 in the 350ci providing
295HP. Then in 1970, it was the cam used in the 300HP 350ci Super Sport
Item #
Description GM Item # Adv Dur
Lift
Price
222050B Cam & Lifters 3896929
195˚/202˚ .390"/.410"
199.99 set
222050D Complete set 3896929
195˚/202˚ .390"/.410"
332.99 set
300hp/327ci Factory Muscle Car Cam
Referred to by GM as part# 3863151, this is Comp Cams’ version of the hydraulic
cam that provided 350HP to the 327 from 1965-68.
Item #
Lift
Price
222051A Camshaft
3863151
222˚
.447"
129.99 ea
222051B Cam & Lifters 3863151
222˚
.447"
199.99 set
222˚
.447"
350.99 set
Z28 Solid Lifter Factory Muscle Car Cam
This is the solid lifter cam that GM installed in the 67-69 Z28 Camaro’s 302,
providing it with 290HP. In 1964-65, it provided the Corvette 327 with 365-375 HP.
Item #
Lift
Price
222052A Camshaft
3849346
254˚
.485"
129.99 ea
222052B Cam & Lifters 3849346
254˚
.485"
229.99 set
254˚
.485"
378.99 set
452
Comp Cams®
The Magnum™ Cam is a great cam
for high performance driving in street
machines. Provides 30-70% more
horsepower and a rough and ready
to rumble idle in small block Chevy
applications. The Magnum™ will not
affect power accessories, but should be
used with headers. This is the perfect
cam for cruising.
Xtreme Energy™ Cams are Comp
Cams® newest series of hydraulic
cams. They are designed to take
advantage of the latest improvements
in valve train components and the
newest developments in camshaft
design. Xtreme Cams can be used in
any street or street/strip application
where both throttle response and top end horsepower are desired. Increases
horsepower from 20-70% over stock. Note: No further discounts apply.
Complete set - includes camshaft, lifters, chain set, valve springs, valve spring
retainers, valve locks, valve stem seals, assembly lube, instructions & decals.
Magnum™ Cams
Item #
222005D
Application
305-350 ci
RPM Range Adv Dur
1800-5800
270˚/270˚
Lift
.470"
Price
334.99 set
Xtreme Energy Cams
™
Item #
222006D
222007D
Application
305.350 ci
305-350 ci
RPM Range Adv Dur
Lift
1300-5600
262˚/270˚ .462"/.469"
1600-5800
268˚/280˚ .477"/.480"
Price
294.90 set
329.99 set
For Computer Controlled Engines!
If you have a late model computer controlled engine, you have to be
VERY CAREFUL when selecting a high performance aftermarket
cam! The wrong cam could “throw off” the computer, spelling real
trouble for your vehicle’s driveability and performance.
Comp Cams® has engineered this line of camshafts specifically for
these engines, ensuring that you get a camshaft that works WITH
your computer, providing exceptional performance and driveability
out of your late model Chevy engine!
Edelbrock Performer Plus Camshaft Kits
Designed for optimum torque from the low-end to the mid-range, Performer®-Plus
camshaft packages match with Performer® manifolds for vehicles operating from
idle to 5500 RPM. All camshafts come with hydraulic lifters, assembly lube and
instructions. Most Performer® cams are 50 state street legal.
Performer Plus Kits for Chevrolet Engines
Item #
Year
Application
Duration
Lift
Price
E3702* 1987-95 305/350 TBI
194˚/214˚
.398"/.442" 171.99 set
204˚/214˚
.420"/.442" 161.99 set
E2102* 1977-86 305-350
*Note: These cams are 50 state legal.
Item #
E2157
Item #
E3712
Camshaft Only
Cam and Lifters
The camshaft only set includes camshaft.
instructions, assembly lube and decals
Order the cam and lifter set to add a
matched set of lifters to your camshaft
Complete Set
Complete set includes cam, lifters,
timing chain & gear valve springs
and retainers, valve locks, valve
stem seals
COMP CAMS for your TBI/Crossfire or Carbureted Late Model!
Designed for use with throttle body, or crossfire injected and carbureted 305 ci
engines. Your choice of 3 kits to suit your specific needs, Camshaft only, Cam
and lifters or complete set. The complete set includes camshaft, lifters, chain set,
valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube,
instructions & decals. Note: No further discounts apply.
Item #
Description RPM Range Adv Dur
Lift
Price
222008A Camshaft
1000-5000
252˚/260˚ .425"/.440" 139.99 ea
222008B Cam & lifters 1000-5000
252˚/260˚ .425"/.440" 208.99 set
222008D Complete set 1000-5000
252˚/260˚ .425"/.440" 369.99 set
COMP CAMS for your 1987-98 Tuned Port Injection Engine!
Important: This cam will not work with stock valve train components. To retain your camshaft
warranty and prevent damage to your engine, you must replace the stock components with a
matched set from COMP CAMS®.
STOCK COMPUTER
Item #
Description
222009A Camshaft
222009B Cam & lifters
222009D Complete set
RPM Range Adv Dur
Lift
1000-5000
262˚/264˚ .450"/.480"
1000-5000
262˚/264˚ .450"/.480"
1000-5000
262˚/264˚ .450"/.480"
Price
284.99 ea
474.99 set
709.99 set
MODIFIED COMPUTER
Item #
Description RPM Range Adv Dur
Lift
222010A Camshaft
1200-5200
264˚/274˚ .480"/.480"
222010B Cam & lifters 1200-5200
264˚/274˚ .480"/.480"
222010D Complete set 1200-5200
264˚/274˚ .480"/.480"
Price
284.99 ea
474.99 set
709.99 set
E2208
Edelbrock Performer RPM Camshaft Kits
Designed for street high-performance applications, Performer® RPM cams provide
power from 1500 to 6500 RPM. These hydraulic lifter camshafts are dyno-matched to
Performer® RPM manifolds for high RPM horsepower while maintaining acceptable
low-end torque. With 10-12 inches of manifold vacuum at idle, Performer® RPM cams
have more lift and duration than most street camshafts. Note: No further discounts apply.
Performer RPM Kits for Chevrolet Engines
Item #
Year
Application
Duration
Lift
Price
E7102 1977-86 305-350
234˚/244˚
.488"/.510" 204.99 ea
Performer RPM Kits for Pontiac Engines
Item #
Year
Application
Duration
Lift
Price
E7157 1965-79 326-455
231º/240º
.470"/.470" 249.99 set
Performer RPM Kits for Oldsmobile Engines
Item #
Year
Application
Duration
Lift
Price
E7112 1967-84 350/403
224º/234º
.496"/.520" 259.99 set
Edelbrock Rollin' Thunder Performer Plus Chevrolet Camshafts
Designed for street high-performance applications, Performer® Plus cams provide
power from off-idle to 5500 RPM. These hydraulic roller lifter camshafts reduce
friction, virtually eliminate break-in problems and permit higher valve velocities for
increased performance. Intended for use with OEM or Edelbrock hydraulic roller
lifters sold separately. Note: No further discounts apply.
Rollin' Thunder Performer Plus Camshafts
Item #
Year
Application
Duration
Lift
Price
E2208 1977-86 305-350
212˚/222˚
.462"/.479" 371.99 ea
E2209 1987-99 305-350
212˚/222˚
.462"/.479" 351.99 ea
Edelbrock Rollin' Thunder Performer RPM Chevrolet Camshafts
Designed for street high-performance applications, Performer® RPM cams provide
power from 1500 to 6500 RPM. These hydraulic roller lifter camshafts reduce
friction, virtually eliminate break-in problems and permit higher valve velocities
for increased performance. Intended for use with OEM or Edelbrock hydraulic
roller lifters sold separately. Note: No further discounts apply.
Rollin' Thunder Performer RPM Camshafts
Item #
Year
Application
Duration
Lift
Price
E2201 1977-86 305-350
234˚/238˚
.539"/.548" 264.99 ea
E2210 1977-86 305-350**
234˚/238˚
.539"/.548" 321.99 ea
E2204 1987-99 305-350*
234˚/238˚
.539"/.548" 254.99 ea
E2205 1987-99 305-350**
234˚/238˚
.539"/.548" 309.99 ea
*Note: Non-LT1, Non-GEN III. **Wide center EFI.
Comp Cams®
453
Designed for use with TPI 305, 350ci engines (Except LT1 & LT4), This cam is
designed for 1987-98 engines originally equipped with hydraulic roller camshaft.
Your choice of 3 kits to suit your specific needs, Camshaft only, Cam and lifters or
complete set. The complete set includes camshaft, lifters, chain set, valve springs,
valve spring retainers, valve locks, valve stem seals, assembly lube, instructions &
decals. Applications are available for use with stock computer or modified computer.
Performer Plus Kits for Pontiac Engines
Year
Application
Duration
Lift
Price
1965-79 326-455
204º/214º
.420"/.422" 249.99 set
Performer Plus Kits for Oldsmobile Engines
Year
Application
Duration
Lift
Price
1967-84 350/403
204º/214º
.448"/.472" 259.99 set
Chevy Engine Components
Aluminum Stud Girdles
AR5981
Each Set Contains 12 Groups of Fasteners:
•
•
•
•
•
•
intake manifold bolts
valve cover bolts
thermostat housing bolts
alternator bracket bolts
distributor bracket bolts
motor mount bolts
•
•
•
•
•
•
oil pan bolts
coil bracket bolts
header bolts
front cover bolts
water pump bolts
fuel pump bolts.
Aluminum stud girdles are designed to reduce flexing
of the rocker arm studs and help reduce part breakage
under high stress. Increased valvetrain rigidity helps
minimize energy loss. For use on small block Chevy
engines through 1986 with full-roller rockers. Includes
2 girdles and 16 specially designed poly locks.
66950
for 3/8" studs .......................... 114.99 set
66951
for 7/16" studs ........................ 114.99 set
1977-95 Engine & Accessory Fasteners
It’s easy to assemble a show-quality engine when
you use ARP’s handy engine & accessory fastener
set. Virtually everything you need comes organized
in one convenient package! More importantly, each
and every fastener is superior in strength to the OEM
bolts. Choose from heat treated 8740 chrome moly
steel with black oxide finish or corrosion resistant
polished stainless steel. Both materials are rated at
170,000 psi tensile strength and come in both hex
and 12-point heads.
Note: Sets are designed for carbureted engines. 1987
& newer EFI applications may require the purchase of
additional fasteners.
K
AR5981 black oxide hex head ............. 108.99 set
AR5971 black oxide 12-point .............. 108.99 set
AR5961 stainless
hex head ............. 129.99 set
AR5951 stainless
12-point .............. 131.99 set
1987-95 Chevrolet SB w/Headers exc. LS1 & LS6
AR5962 stainless
hex head ............. 194.99 set
AR5952 stainless
12-point .............. 209.99 set
Chevrolet Small Block LT1/LT4 w/Headers
AR5963 stainless
hex head ............. 224.99 set
AR5953 stainless
12-point .............. 234.99 set
1996-02 Vortec w/Headers exc. LS1 & LS6
AR5964 stainless
hex head ............. 194.99 set
AR5954 stainless
12-point .............. 204.99 set
Pontiac 350-400-455
AR5996 stainless
hex head ............. 159.99 set
AR5995 stainless
12-point .............. 159.99 set
66905
Stamped Rocker Arm Sets
Stamped steel rocker arms featuring long slots for use
with cams that have lift specs higher than stock for
additional clearance at the rocker stud. Easy installation
requiring no special tools and will fit under stock
valve covers. Fits small blocks through 1986 with
stock 1.5:1 pivot ratio and 3/8" rocker studs. Set of
16 rockers with pivot balls and nuts, or, add a set of
16 stock-length, high-performance 5/16" push rods
with welded ball ends and save.
Note: Check for pushrod clearance and alignment, spring
coil bind, piston-to-valve clearance and valve timing when
modifying the valvetrain to exceed factory specs.
1.5:1 ratio for 3/8" Stud
66905
................................................. 54.99 set
66923C with push rods ......................... 84.99 set
Poly Locks for Roller Rockers
Poly locks are designed for use specifically with full
roller rockers featuring a set-screw locking device
to ensure they remain secure. Set of 16.
66935
for 3/8" studs ........................... 19.99 set
66936
for 7/16" studs ......................... 21.99 set
These lifters will fit 1977-92
small block Chevrolet engines
and are offered in your choice of hydraulic or
mechanical depending on your particular application.
TVL817 hydraulic ................................. 4.49 ea
TVL43
mechanical .............................. 6.99 ea
454
Self Aligning Sets
66926C 1.5:1 ratio ............................... 129.99 set
Aluminum Roller Rockers
The needle bearing fulcrum
and roller tip design
unleashes power while
lengthening valve train life
and reducing valve stem
tip wear. Small block sets are
available for engines with stock
1.5:1 ratio arms, or performance enhancing 1.6:1
arms. For small blocks through 1986, a combination
of (8) 1.5:1 arms and (8) 1.6:1 arms is available to
allow greater air flow on either the intake or exhaust
ports. Sets include 16 rockers with poly locks.
Early Small Block Sets for 3/8" Stud
66907C 1.5:1 ....................................... 144.99
66908C 1.6:1 ....................................... 144.99
66920C 1.5:1/1.6:1 .............................. 174.99
Early Small Block Sets for 7/16" Stud
66909C 1.5:1 ....................................... 144.99
Late Small Block Sets for 3/8" Stud
66914C* 1.5:1 ....................................... 189.99
66915C* 1.6:1 ....................................... 189.99
set
set
set
set
set
set
Early HD Roller Rockers
66906C
Replacement Lifters
Note: * 87 and later. Check pushrod clearance and
alignment, spring coil bind, piston-to-valve clearance and
valve timing when modifying the valve train.
Small Block Push Rods
Heat treated 5/16" diameter push rods with welded ball
ends for small block Chevrolet applications through
1986. Includes 16 push rods in a clamshell package.
66890C stock length ............................. 29.99 set
66889C +.100"...................................... 26.99 set
Cast Roller Tip Rocker Sets
Cast chrome-moly steel rocker arms feature roller tips
for reduced friction, and long slots for use with cams
that have lift specs higher than stock for additional
clearance at the rocker stud. Available for small
block Chevrolet engines in your choice of standard
sets or self aligning sets in the stock 1.5:1 pivot ratio
or a performance enhancing 1.6:1 ratio for increased
horsepower and torque. Easy installation requiring no
special tools and will fit under stock valve covers. Fits
small blocks through 1986 with 3/8" rocker studs. Set
of 16 rockers with pivot balls and nuts.
Stamped Roller Rocker Sets
Stamped steel rocker arms feature roller tips for reduced
friction, and long slots for use with cams that have lift
specs higher than stock for additional clearance at the
rocker stud. Available in the stock 1.5:1 pivot ratio,
or, a performance enhancing 1.6:1 ratio for increased
horsepower and torque. Easy installation requiring no
special tools and will fit under stock valve covers. Fits
small block Chevrolet engines through 1986 with 3/8"
rocker studs. Set of 16 rockers with pivot balls and nuts.
66906C
66922C
Chevy Engine Components
1.5:1 ratio ................................ 79.99 set
1.6:1 ratio ................................ 84.99 set
Set of 16 full-roller
rockers designed for up
to 10,000 RPM. This
heavy duty design features
an oversized body and
fulcrum with a triangulated
profile for additional rigidity
and strength. Will accommodate
most oversized valve springs. American-made roller
bearings are in self contained bearing-cups for extra
low friction wear. Available in the stock 1.5:1 pivot
ratio, or, 1.6:1 ratio for increased horsepower and
torque. Fits small blocks through 1986 with 3/8" or
7/16" rocker studs.
modifying the valve train to exceed factory specs.
Small Block Sets for 3/8" Stud
66928C 1.5:1 ....................................... 189.99
66929C 1.6:1 ....................................... 189.99
Small Block Sets for 7/16" Stud
66930C 1.5:1 ....................................... 189.99
66931C 1.6:1 ....................................... 174.99
set
set
set
set
Gaskets & Engine Hardware
Mr Gasket Performance
Head Gaskets for Chevrolet Engines
Mr. Gasket head gaskets are one of the most advanced,
tested and proven in the performance market today
and earned the respect of many professional engine
builders. A variety of gasket materials are available
to meet your specific needs.
08661
Super Silicone Sealant
Excellent for use with all types of gaskets. A rapid curing
adhesive/sealant can also be used as a sealant between
flanges, hose connectors, and similar close fitting parts.
08661
clear, 3 oz. tube ........................ 9.99 ea
08662
black, 3 oz. tube ....................... 9.99 ea
1977-79 Trans Am Engine Block Plugs
Reproduction engine block plugs for 1977-79 Trans
Am models with Oldsmobile 403ci V8 engine. 2 plugs
feature the hole to squirt oil on the timing chain.
TA4006 1977-79 4 piece set ................ 16.99 set
73144
Mr. Gasket Ultra-Seal
The Ultra-Seal head gasket has a five layer composite
construction and is coated with high temperature
silicone to ensure seal of engine fluids. It’s graphite core
has excellent thermo-conductivity; transfers heat away
from hot spots in head to coolant passages, preventing
gasket burn-out. The Ultra-Seal head gasket provides
excellent stability, compressibility, high temperature
endurance and will not Brinell (indent) aluminum
cylinder heads.
.028" Comp. Thickness
71134 1977-91 305-350, 4.130" bore ... 39.99 ea
.051" LH, Driver Side
75713 1997-03 346 LS1, 4.000" bore... 36.99 ea
Mr. Gasket MLS (Multi-Layered Steel)
The MLS head gasket is manufactured from Viton
rubber coated stainless steel layers and is stress formed
embossments seal extreme cylinder pressure. The MLS
head gasket provides excellent stability and reduces
cylinder bore distortion. Ideal for supercharged, turbo
charged, nitrous and extreme compression ratios.
73130 1977-91 305-350, 4.060" bore ... 94.99 ea
73131 1977-91 305-350, 4.125" bore ... 94.99 ea
73132 1977-91 305-350, 4.165" bore ... 94.99 ea
73133 1977-91 305-350, 4.200" bore ... 94.99 ea
73140 1992-97 350 LT1, 4.040" bore ... 94.99 ea
73141 1992-97 350 LT1, 4.100" bore ... 94.99 ea
73143 1997-03 346 LS1, 4.125" bore... 94.99 ea
73144 1997-03 346 LS1, 4.160" bore... 94.99 ea
Mr. Gasket Steel Shim
The Steel Shim head gasket is manufactured from .020"
steel shim stock and is stress formed embossments
seal extreme cylinder pressure. Made thinner than
OE head gasket, increases engine compression and
coated with high temperature silicone to ensure seal
of engine fluids.
1977-79 Trans Am Engine Block Plugs
Engine block plugs for 1977-79 Trans Am models with
403ci Oldsmobile V8 engine. Sold as a 4-piece set.
TA4008 1977-79 4 piece set ................ 9.99 set
S80022
S81160
S81878
Permatex® Gasket Maker
Makes reliable formed in place gaskets that resist
cracking, shrinking and migrating. Coats pre-cut
gaskets to increase reliability. Resists auto and shop
fluids. Great for use on valve covers, intake manifold
end seals, timing covers, water pumps, and thermostat
housings. 3 oz. tube.
S80022 blue #6B ................................... 3.99 ea
S81160 red #26B ................................... 4.99 ea
S81878 copper #101B ........................... 5.99 ea
Form-A-Gasket Sealant
Slow drying, non-hardening sealant designed for
sealing cut gaskets and stamped parts. Allows for
easy disassembly if required. Temperature range of
-65ºF to 400ºF. Use where sealing is more important
than adhesion. Resists shop fluids and fuels. Great for
valve cover gaskets and oil pan gaskets. Comes in 3
oz. tube in your choice of standard or hi-temp formula.
S80016 3 oz. standard ........................ 3.99 ea.
Note: Do not use with lightweight 305 heads.
Note: Do not use with lightweight 305 heads.
71052 1977-91 305-350, 4.140" bore ... 49.99 ea
Mr. Gasket Solicor
The Solicor head gasket has a solid steel core that
provides radial strength for combustion flange.
The steel wire ring inside stainless steel flange
concentrates sealing load around the combustion
chamber. The Solicor head gasket provides excellent
stability and reduces cylinder bore distortion. Ideal
for supercharged, turbo charged, nitrous and extreme
compression ratios.
75727 1977-96 305-350, 4.190" bore .. . 49.99 ea
.042" Vortec
75727 1996-01 350, 4.190" bore .......... 49.99 ea
G9158
Freeze Plugs
Avoid the chance of rusted leaking freeze plugs with
these brass freeze plug sets. Intended for high corrosion
marine applications, they are perfect for vehicles that sit
for long periods and are a superior material for the every
day driver. Available for small block Chevy engines.
64812
small block set .......................... 24.99 set
G9239
1967-70 Pontiac Rocker Arm Hardware
Original replacement rocker arm hardware for 1967-70
Firebird models.
G9158 1969-70 w/Ram Air IV, 16 nuts req 1.99 ea
G9239 1967-70 8 bolts req...................... 2.99 ea
A8700129
1968-75 Reproduction Head Bolts
1977-79 Trans Am Engine Block Locating Pins
Reproduction locating pins for the cylinder heads
and timing cover for 1977-79 Trans Am models with
Oldsmobile 403ci V8 engine.
TA4011 1977-79 .................................... 9.99 set
Original style Pontiac cylinder head bolts for 1968-75
Ram Air II, III, IV, 455 HO and Super Duty models.
Each 20 piece set features correct markings and includes
original specification bolts, including accessory mount
bolts with stud style heads. Available for Round Port
and D Port cylinder heads.
A8700129 1968-74 Round Port ........ 118.99 set
A8700130 1969-75 D Port ............... 99.99 set
Gaskets & Engine Hardware
455
71130 1977-91 305-350, 4.100" bore ... 19.99 ea
Mr. Gasket Copper (Dead Soft)
The Copper head gasket is manufactured from dead soft
solid copper. Provides excellent stability and reduces
cylinder bore distortion and can be used with or without
stainless steel o-rings. The Copper head gasket is ideal
for supercharged, turbo charged, nitrous and extreme
compression ratios.
1977-79 Trans Am Engine Freeze Plugs
Freeze plugs for the 403ci Oldsmobile V8 engine fitted
in 1977-79 Trans Am models. This 8-piece set contains
all necessary freeze plugs for a complete replacement.
TA4007 1977-79 8 piece set ................ 16.99 set
Oil Pumps and Components
WE140
PS133
Oil Pressure Switch Socket
Easily remove oil pressure sending units! This socket
designed with extra recess to accommodate most oil
pressure switches and many brake lamp switches. This
3/8" drive socket features a 1-1/16" hex opening and
a durable black oxide coating.
X3923
.................................................. 5.99 ea
G6042
PS220
1977-02 Original Oil Pumps
Replace your small block Chevrolet oil pump with
an original GM replacement. Oil pumps that are not
in proper working order can cause major problems
including the possibility of seizing your engine.
G6042 1977-92 small block................. 149.99 ea
G9408 1993-94 1st des.742 dia tube ... 148.99 ea
G6042 1993-94 2nd des .620 dia tube . 149.99 ea
G9408 1995-97 LT1............................. 148.99 ea
G9409 1998-02 LS1............................. 141.99 ea
10540
10541
1967-02 High Performance Oil Pumps
These Melling Select oil pumps are heavy duty cast
pumps that feature steel billet gears for optimum
performance. These pumps are available for Pontiac
Firebirds from 1967-81 with 301-455 engines, 1993-97
models with LT1 engines and 1998-02 models with
LS1 engines. These top quality performance pumps
are available with a higher than stock oil flow for use
on higher horsepower or race motors.
K
Note: *Includes pickup screen.
1967-81 301-455
10540* high pressure ...........................
1967-81 301-355
10541* 30% higher pressure than 10540
1993-97 LT1-350
10553 std volume ...............................
10550 std volume + 25% over std vol.
10551 25% higher volume, 3/4" inlet
1998-02 LS1-350
10295 10% higher pressure than stock
10296 18% higher volume than stock
119.99 ea
119.99 ea
99.99 ea
104.99 ea
104.99 ea
134.99 ea
179.99 ea
TA4037
1977-79 Trans Am Oil Pressure Line
Engine block-to-oil pressure sender oil pressure line
for 1977-79 Trans Am models with an Oldsmobile 403
engine. Available in your choice of OEM or stainless
steel material.
TA4037 1977-79 OEM ........................ 8.99 ea
TA4038 1977-79 stainless steel ........... 10.99 ea
456
Oil Pumps
PS115
1967-02 Oil Pressure Sending Units
An oil pressure sending unit is an electrical or
mechanical sensing device that sends information to the
pressure gauge or light. Fits 1967-02 Firebird models.
For Vehicles Originally Equipped w/Gauges
PS136
1967-81 all.............................. 19.99 ea
WE140 1982
2.8-1 w/60 PSI ......... 19.99 ea
PS133
1982-84 2.8-1 w/80 PSI ......... 19.99 ea
PS133
1982-85 5.0-H w/80 PSI......... 19.99 ea
WE140 1982-87 5.0-H w/60 PSI......... 19.99 ea
PS327
1982-83 5.0-7 w/60 PSI ......... 57.99 ea
PS389
1982-83 2.5-F, 2.5L-2............. 54.99 ea
PS327
1983
5.0-S w/60 PSI ......... 57.99 ea
PS327
1983-84 5.0-H w/60 PSI......... 57.99 ea
PS327
1984
5.0-G w/60 PSI......... 57.99 ea
PS133
1984-85 5.0-G w/80 PSI......... 19.99 ea
WE140 1984-86 5.0-G w/60 PSI......... 19.99 ea
PS133
1985
5.0-F w/80 PSI ......... 19.99 ea
PS133
1985-87 2.8-S w/80 PSI ......... 19.99 ea
WE140 1985-88 5.0-F w/60 PSI ......... 19.99 ea
PS223
1986
2.5-2 ......................... 63.99 ea
WE140 1987-88 5.7-8 w/60 PSI ......... 19.99 ea
WE140 1988
5.0-E w/60 PSI ......... 19.99 ea
PS212
1988
2.3-S ......................... 24.99 ea
PS168
1989
2.8, 3.8...................... 24.99 ea
PS207
1989-92 5.0, 5.7, 1 prong ....... 24.99 ea
PS168
1990-91 3.1, 1 prong .............. 24.99 ea
PS220
1993-94 3.4-S, w/o ground..... 29.99 ea
PS220
1993-94 5.7-P ......................... 29.99 ea
PS240
1994-95 3.4-S, 2nd des........... 31.99 ea
PS168
1994-97 5.7-P, 2nd design ...... 24.99 ea
PS227
1995-96 3.8-K, 4 prong .......... 21.99 ea
PS352
1998
5.7-G ........................ 44.99 ea
PS240
1997-02 3.8-K ........................ 31.99 ea
PS391
1999-02 5.7-G ........................ 51.99 ea
For Vehicles Originally Equipped w/Lights
PS117
1967-76 8 cyl. all.................... 4.99 ea
10045707 1968-76 6 cyl. all.................... 6.99 ea
PS118
1977
231-C........................ 7.99 ea
10045707 1977
350-R, 403-K ........... 6.99 ea
PS117
1977
301-Y ....................... 4.99 ea
10045707 1978
305-U, 350-L............ 6.99 ea
10045707 1978-79 403-K ....................... 6.99 ea
PS113
1978-81 231-A........................ 8.99 ea
10045707 1979
305-G, 350-L............ 6.99 ea
PS117
1979
301-Y, 301-W ........... 4.99 ea
PS115
1980
301-T, 301-W, 305-H 5.99 ea
PS115
1981
4.4-J.......................... 5.99 ea
PS115
1981
5.0-H ........................ 5.99 ea
PS114
1981
265-S ........................ 8.99 ea
PS118
1982-83 2.5-F ......................... 7.99 ea
PS117
1982-84 2.8-1, 1 terminal ....... 4.99 ea
PS114
1982-84 2.8-1, 2 terminal ....... 8.99 ea
PS118
1982-86 2.5-2 ......................... 7.99 ea
10045707 1982-86 5.0-H, 1 terminal ...... 6.99 ea
PS114
1985-86 5.0-F, 5.0-G .............. 8.99 ea
PS117
1985-87 2.8-S, 1 terminal....... 4.99 ea
PS114
1985-87 2.8-S, 2 terminal....... 8.99 ea
PS154
1987-88 5.0-F, 5.7-8 ............... 11.99 ea
PS154
1988
5.0-E ......................... 11.99 ea
PS167
1988
2.8-S, 2 terminal....... 17.99 ea
PS207
1989-92 5.0-E, 5.0-F, 5.7-8 .... 24.99 ea
PS168
1989
2.8-S, 3.8-7 .............. 24.99 ea
PS118
1989
3.8-7 (switch) ........... 7.99 ea
PS168
1990-91 3.1-T (fuel pmp swtch) 24.99 ea
PS188
1992
3.8-T ......................... 7.99 ea
1967-72 Oil Pressure Lead
Oil pressure sending unit wire lead brass elbow. Needed
on cars with gauges to connect to the wiring harness.
1253514 1967-72 ................................. 5.99 ea
F31003
GT440
G7300
1967-97 Oil Filter Adapters
Replacement oil filter adapters for 1967-79 Pontiac
engines and 1977-97 Chevrolet small block engines.
Note: *"Must Have" bypass valve and spring designed to
GM specs of 12-16 PSI.
Pontiac
GT440 1967-69
F31003* 1970-79
Chevrolet
G7300 1977-97
G9413 1987-96
Pontiac ..................... 54.99 ea
Pontiac ..................... 84.99 ea
SB w/o oil cooler..... 49.99 ea
SB w/oil cooler........ 26.99 ea
1977-79 Trans Am Oil Filter Housing Gasket
Oil filter housing to engine block gasket for 1977-79
Trans Am with 403ci Oldsmobile engine. This gasket
mounts between the oil filter housing and engine block.
TA4027 1977-79 Olds 403 .................. 4.99 ea
1977-79 Trans Am Oil Filter Housing Bolts
Oil filter housing to engine block for 1977-79 Trans
Am with 403ci Oldsmobile V8 engine. These bolts
hold the oil filter housing to engine block and feature
correct TR head markings. Sold as a 3-piece set.
TA4028 1977-79 Olds 403 .................. 6.99 set
Oil Pans and Components
30355
1982-02 Original GM Oil Pans
1955-85 Milodon Pontiac Oil Pan Gaskets
Production Pontiac V8 engines were redesigned in
1986 with a leak resistant one piece rear seal. This
change required a revised oil pan design to fit a new
rear seal retainer which is bolted to the back of the
engine block. As a result of these changes, oil pans and
gaskets are not interchangeable between 1955-85 and
1986-up engines. If you have installed a crankshaft
seal adapter on a block which is machined for a one
piece rear seal, you must use an oil pan and gasket
designed for 1986 and newer engines.
Note: Gaskets not included with oil pans and must be
purchased separately.
G9079
G12915
G12916
G12917
1982-85
1987-92
1993-97
1998-02
2.5 ............................ 135.99
5.0-F, 5.7-8, 305-H .. 193.99
5.7L .......................... 134.99
5.7L .......................... 324.99
ea
ea
ea
ea
Milodon “Crush Proof” Gasket/Seal Sets
40900
1955-85 Pontiac V8 ............... 21.99 set
18425
A Low Profile Pan Suited for Strip or Street!
This pan features oil control baffles designed to provide
consistent oil pressure by subduing unwanted, power
robbing oil movement. Fits Pontiac 326, 350, 389,
400, 421, 428 and 455. Pan capacity is 7 quarts plus
filter. Sump is 8” deep. Use with Milodon Hi-volume/
Hi-pressure oil pump and correct oil pickup screen
as listed below. Sold separately is Milodon’s “crush
proof” gasket seal set, item# 40900.
32240
1967-81 Chrome Replacement Oil Pans
Pontiac V8 Low Profile Oil Pan
30355
Pontiac V8 oil pan ................ 269.99
40900
Pontiac V8 oil pan gasket ..... 21.99
Pontiac V8 Windage Tray
32240
windage tray ............................ 66.99
81151
windage tray installation kit .... 59.99
Pontiac V8 Oil Pump Pickup Screen
18425
for 18850 pump ....................... 59.99
ea
set
ea
set
ea
OEM quality look complete with baffle. Each pan is
designed to fit as original and holds 4 quarts. Add 1
quart when changing filter. This oil pan is triple chrome
plated. Also includes the drain plug! Fits 301-455.
Windage trays separate oil from the crankshaft as it
spins, preventing excess drag and allowing increased
horsepower for both street and strip. On a 400
horsepower street engine, a louvered tray can add
12-15 horsepower. Installation kit sold separately.
Solid Louvered Windage Tray
32240
350-455 Pontiac V8.................. 66.99 ea
Windage Tray Install Set
81151
350-455 Pontiac V8.................. 59.99 set
Note: Not for Oldsmobile engine.
T9337
81151
Milodon Windage Tray Components
1967-81 .................................. 119.99 ea
40100
30770
G7286
1977-02 Oil Pump Pickups
18670
326-455ci Pontiac
30770 Milodon oil pan ......................... 154.99 ea
18670 Milodon oil pump pickup tube.. 29.99 ea
40900 Pontiac V8 oil pan gasket.......... 21.99 set
41000
Milodon Oil Pan Gaskets & Seals
If you're ordering a Milodon pan, you'll need a Milodon
gasket and seal to go with it. Choose from a steel
reinforced reusable molded design or a multi-piece
crushproof version made of virtually indestructible
materials. A variety of applications and configurations
are available.
A screened oil pump pickup protects the oil pump
gears against damage from metal fragments which
may have found there way into the oil pan. These small
block Chevy oil pickups also inhibits the formation of
a vortex in the oil sump.
G7286 1977-92 small block ............. 21.99 ea
G7286 1993-94 2nd design .............. 21.99 ea
G9411
1995-97 LT1 ......................... 20.99 ea
G9412 1998-02 LS1 ......................... 53.99 ea
1976-79 One Piece Small Block
41000
1 piece molded gasket ..............
41010
1 piece molded stroker gasket ..
1976-85 Crushproof Small Block
40100
5 piece gasket/seal set ..............
41105
4 piece stroker gasket/seal set ..
1986-up One Piece Small Block
41001
1 piece molded gasket ..............
31.99 ea
41.99 ea
19.99 set
21.99 set
34.99 ea
Oil Pan Battery Cable Clip
This clip is installed between an oil pan bolt and the oil
pan to provide a guide for the battery cable to the starter.
C2555
................................................ 6.99 ea
Oil Pans
457
Leaky or Rusted Oil Pan? Go for the Gold!
These stock replacement oil pans feature a distinctive
gold plating that is not only cosmetic, but also provides
long lasting protection against corrosion, inside and out.
Every pan is 100% leak checked and block checked
to assure the high standard of quality that Milodon is
famous for. Flat, unwarped pan rails and proper bolt
hole alignment provide for a fit and function that is
unmatched in the industry. All pans are specifically
designed for use only with Milodon gaskets. Sold
separately is Milodon’s “crush proof” gasket seal set,
item# 40900 for 326-455ci Pontiac engines. For use
with original stock oil pickup screen or Milodon stock
type replacement #18670 sold separately.
Oil Pan Hardware
1977-81 Chevrolet SB Oil Pan Bolt Set
Reproduction of the original style oil pan bolts used
on all early Chevrolet small block engines. Zinc
plated with the “L” head markings as original, with
external tooth lock washers. (14) 1/4"-20 x 1/2" and
(4) 5/16"-18 x 5/8".
1256657 1977-81 .................................. 16.99 set
A- Arrowhead B- GT logo C- Flames
1967-81 Oil Pan Bolts
Reproduction of the oil pan bolts used on 1967-81
Pontiac models. These are exactly like the original
bolts to give you the look you desire.
F780
1967-81 .................................... 24.99 set
1977-79 Trans Am Oil Pan Bolts
Reproduction oil pan bolts for 1977-79 Trans Am
models with 403ci Oldsmobile engine. This 20-piece
set comes complete with all bolts necessary to mount
the oil pan.
TA4014 1977-79 20 piece set .............. 22.99 set
1978-97 Logo Oil Pan Bolt Sets
No-Mess Drain Plug
Dress up your Firebird with these one-of-a kind dressup bolt sets. The Pontiac Arrowhead, GT or flames logo
is stamped directly onto the head of the bolts. They
are available in decorative chrome plated or polished
stainless steel versions. What better way to make a
statement than with these unique bolts?
Replacement oil pan drain plug designed to help
eliminate the messy aspects of draining your oil.
Includes a special gasket on the end of the plug to help
keep the oil where it belongs while draining.
66960
1/2"-20..................................... 4.99 ea
Note: Must specify logo suffix after part number,
A-Arrowhead, B-GT logo, C-Flames.
Chrome
56465C 1978-87
56497C 1993-97
Stainless Steel
56465S 1978-87
56497S 1993-97
Chevrolet small block 31.99 set
LT-1 engine ............... 34.99 set
Chevrolet small block 19.99 set
LT-1 engine ............... 29.99 set
A magnetic drain plug is cheap insurance for a high
performance engine. This plug will catch and hold small
pieces of metal before they cause damage.
G8756 1967-81 non-magnetic 1/2"- 20 ..... 5.99 ea
G7301 1976
magnetic 1/2"- 20............. 22.99 ea
G9405 1979-95 M12 x 1.75 ....................... 4.99 ea
G8756 1988-96 1/2" - 20............................ 5.99 ea
G3739 1995-02 non-magnetic M12 x 1.75 . 5.99 ea
head detail
81320
1977-81 Oil Pan Bolt Sets
When replacing your oil pan, replace your original
greasy, worn out bolts with a set of chrome plated
bolts to dress up your engine. 18 bolt set for Chevrolet
small block. (14) 1/4"-20 x 1/2" & (4) 5/16"-18 x 1/2"
T9271
1977-81 .................................... 9.99 set
G7301
1967-02 Oil Pan Drain Plug
Milodon Oil Pan Hardware Set
Forget about cleaning up your old outdated hardware.
This complete hardware set contains everything you
need for a quick and accurate installation of your oil
pan. Designed especially to firmly hold oil pans in
place, without loosening up. Bolts feature a built-in
serrated washer face that eliminates the need for lock
washers. Construction is such that they can be used
time and time again.
1970-81 Oil Pressure Regulator Hole Plug
Original plug designed to fill the regulator hole. Plug
is designed for all 1970-81 6 cyl. Firebirds.
G9084
1970-81 .................................. 4.49 ea
K
Oil Pan Hardware Sets for Pontiac Engine
85020
plated bolt set ........................... 9.99 set
81320
stud & nut kit............................ 31.99 set
AR43482
1992-02 Oil Level Sensor O-Ring
Oil Pan Bolt Sets
ARP’s premium grade pan bolts combine sealing
efficiency with good looks. They are available in
black oxide finished chrome moly steel or rust-proof
stainless steel. Also, take your pick from conventional
hex bolt heads and a space-saving 12-point design.
Includes washers.
AR23482 black oxide hex head .............. 29.99 set
AR23481 black oxide 12-point............... 29.99 set
AR43482 stainless
hex head .............. 39.99 set
AR43481 stainless
12-point............... 39.99 set
Pontiac Engine
AR20182 black oxide hex head .............. 29.99 set
AR20181 black oxide 12-point............... 29.99 set
AR40182 stainless
hex head .............. 41.99 set
AR40181 stainless
12-point............... 44.99 set
458
Oil Pan Hardware
Original replacement oil level sensor o-ring creates a
seal between the sensor and the oil pan.
G8428 1992-02 o-ring (all) .............. 4.99 ea
AK123A
head detail
Oil Pan Bolt Sets
Polished and chromed, or polished stainless steel oil
pan bolts will add a custom look to your oil pan while
assuring high quality. Includes all necessary flat and
internal tooth lock washers. Chevrolet Small block (14) 1/4"-20 x 1/2" and (4) 5/16"-18 x 5/8".
AK124A polished chrome .................... 41.99 set
AK124B polished stainless ................... 82.99 set
G8757
1967-02 Oil Pan Drain Plug Gasket
This is a correct replacement gasket which is used to seal
the oil pan drain plug and keep it from leaking. Be sure
to replace the gasket whenever replacing the drain plug.
G8757 1967-97 ................................. 3.99 ea
G9404 1998-02 o-ring ....................... 2.99 ea
Oiling Components
F191
G8429
1992 Dip Stick Tube Nut
1967-69 Upper Dipstick Tube with AC
G3899
The dip stick tube nut for use with 1992 Firebirds.
G8429 1992 3.1T (8mm-1.25 x 6.55) .. 1.25 ea
G8430 1992 3.1T (8mm-1.25 x 7.5) .... 3.99 ea
Reproduction of the upper dipstick tube for 1967-69
Firebird with air conditioning. This is stainless steel
constructed with a TIG welded bracket to overcome
issues with broken spot welds. The bracket correctly
attaches to the front valve cover bolt as original.
Note: Very late 1969 models had a tube that did not attach
to the valve cover. Use G9075 dipstick tube.
G3916
F199
1967-69 ......................................... 33.99 ea
1967-02 Oil Level Upper Dipstick Tubes
1977-79 Flexible Engine Oil Dip Sticks
Each dipstick tube will replace your original exactly.
We offer dipstick tubes for all generation models.
Pontiac
F191
1967-72 V8 ........................... 30.99 ea
G9075 1970-79 upper with AC ........ 36.99 ea
F191
1971-72 with 455 HO ........... 30.99 ea
F191
1976-79 V8 upper ................. 30.99 ea
Small Block
G8426 1988-92 5.0, 5.7 .................... 67.99 ea
G3899 1995-97 8 cyl ........................ 19.99 ea
G3916 1998-02 8 cyl ........................ 13.99 ea
These flexible engine oil dip sticks are designed to
bolt to the block between the headers and the block.
They feature an aluminum handle, braided housing
and stainless steel dipstick. Available for small block
Chevrolet engines.
50021 1977-79 small block .................. 24.99 ea
1972-79 Lower Dipstick Tube with Bracket
1253542
Reproduction of the lower dipstick tube for use on
1972-79 models. This dipstick will replace your
original exactly.
490768 1972-74 exc. 307 .................... 29.99 ea
490768 1975
.................................. 29.99 ea
490768 1976
350, 400, 455 ............ 29.99 ea
490768 1977
350, 400 .................... 29.99 ea
490768 1978-79 400 ............................ 29.99 ea
Flexible Engine Dip Sticks
1253543
1967-73 Pontiac V8 Lower Dipstick Tubes
G9068
Reproduction lower dipstick tubes for 1967-73 models
with Pontiac V8 engines. 1967-68 dipstick tube features
correct original 39 degree angle. 1969-73 dipstick tube
features correct original 52 degree angle.
G3895
Note: Pan must be removed from engine to install tube.
1253542 1967-68 39º angle .................. 18.99 ea
1253543 1969-73 52º angle .................. 18.99 ea
Flexible engine dip stick designed with billet aluminum
handle to coordinate with Lokar’s flexible transmission
dip sticks. Slim design allows mounting between header
tubes, they can also be used with factory or Sanderson
cast manifolds. Easy to read flexible inner dipstick
measuring cable for accurate measure of engine oil.
14705
1979 & earlier rear sump ......... 64.99 ea
14706
1980 & later rear sump ............ 64.99 ea
14708
all Vortec ................................ 64.99 ea
14707
1997-02 LS1 ......................... 64.99 ea
G3897
1967-79 Chrome Oil Pan Dipstick and Tube
Aftermarket chrome oil dipstick set for use on 1967-79
Pontiac V8 engines without air conditioning, except
389 and 403. Features the highest quality triple chrome
plating available.
Note: Will not replace 2-piece tube. Compare length and
markings against original stick and tube before installing.
T9405
1967-79 ....................................
8.99 ea
1968-02 GM Oil Level Dipsticks
Original GM dipsticks will replace bent or missing
originals exactly. We offer a larger variety of these
dipsticks to choose from including some 3rd generation
models!
G9068 1968-79 350, 400, 455 w/o AC .. 15.99 ea
G3895 1993-94 8 cyl. ............................ 20.99 ea
G3896 1995-97 8 cyl. ............................ 20.99 ea
G3897 1998-02 8 cyl. ............................ 20.99 ea
Billet Aluminum Push-In Engine Dipstick
Billet aluminum handle with a stainless steel dipstick
for pre-1980 small block Chevrolet engines. Installs
straight into the engine block, no tube necessary. Seals
at the bottom of the handle with two O-rings. Billet
aluminum handle designed to coordinate with Lokar’s
flexible transmission dipsticks.
14711 1979 & earlier rear sump .............. 31.99 ea
Oiling Components
459
G3896
Oiling Components
Swivoil Filter Wrench
25051
Made of high-quality steel, each wrench has a zincplated yoke and blackened band for resistance to rust
and corrosion. The plastic dipped handle will not slide
off in use. Hard to reach oil filters will come off easily
with this swivel handle oil filter wrench. Swivel tension
is adjusted easily using the nut and bolt on the handle.
X3082 range 3-1/2" to 3-7/8"............... 9.99 ea
15502
One Pour Boy Fits All These Containers!
25131
Oil Catch Tanks
An oil catch tank works as a filter for the PCV system.
It connects between an engine's crankcase vent and
the induction system, filtering oil and moisture before
they can enter the intake manifold, reducing emissions
and carbon buildup. These fabricated aluminum tanks
come complete with mounting tabs, barbed inlet/outlet
fittings, a drain plug, and a sight glass to let you know
when it's full.
25031 round 34oz sealed tank ............... 56.99 ea
25051 round 17oz tank w/breather filter 56.99 ea
25131 rectangular 68oz sealed tank ...... 111.99 ea
15503
1993-02 Derale Engine Oil Coolers
Our high capacity 6-pass cooler features heavy duty
tube and fin, 1/2" seamless copper tubes expanded into
3/4" aluminum extraction, plastic edge guard protectors
and an attractive black powder coated finish. Cooler
size 7-1/2" x 17" x 3/4"
15502
all
4, 6 cyl ................... 99.99 ea
15502
1993-02 V8 .......................... 99.99 ea
15503
1955-92 Chevrolet V8 ......... 99.99 ea
1976-92 Engine Saver
Prefilter Screen
Add life to your engine with a
prefilter screen for your oil filter.
This stainless steel screen installs on
top of conventional spin-on oil filters
and traps debris down to the 280 micron
range without restriction or loss in oil pressure,
letting you examine particles from failing bearings
that would normally be trapped in a filter, unseen.
223845 1976-92 SB Chevrolet ........... 15.99 ea
K
1976-92 Oil Bypass Eliminator
An oil
bypass
valve lets oil bypass the
filter if pressure gets
too high or the filter
becomes plugged. For
performance engines
that often see increased oil
pressure at high RPM, this
can cause more damage than it
prevents, due to the frequent circulation of unfiltered
oil. This anodized billet aluminum adaptor eliminates
the bypass valve, preserving your expensive engine.
For small block applications.
223775
1976-92 ................................... 34.99 ea
1976-92 Oil Return Screen Set
This oil return
screen set is
inexpensive
insurance on
any modified
small block Chevy
engine. The screens
install in and over the
oil drain holes in the
lifter valley, trapping
debris from valve train
failure, keeping it out of the oil pan. Includes galley
plugs, screens, and a special epoxy for installation.
225000
1976-92 ................................... 24.99 set
460
Oil Products
Pour Boy All Purpose Filler Spout
Pour Boy all purpose filler spout takes the place of
funnels. With its unique multiple thread design, Pour
Boy fits a variety of containers from oil bottles to
antifreeze, windshield washer fluid to gas treatments,
all with an airtight seal! Flow of the fluid is easily
controlled by simply bending the spout. No more mess!
No more fuss... and... no more funnels! 3 per package.
RM1003 ............................................... 7.99 kit
FL3954
Flex-a-Lite Heavy Duty Engine Oil Coolers
This high performance engine oil cooler features a
heavy duty 7" x 21" x 1-1/2" core with 5/8" tubes
for higher horsepower applications. Comes complete
with all hardware.
FL3953 4 cyl.- 6cyl............................. 224.99 ea
FL3954 V8 .......................................... 239.99 ea
FRA300
FSS375
FilterMag
FilterMag’s powerful rare-earth magnets trap and hold
wear inducing metal particles smaller than 40-microns
down to 1-micron that the filter cannot stop. The superstrong magnetic force holds FilterMag to the cannister.
FilterMags are reusable and will reduce maintenance
costs by extending the life of your oil. Fits steel oil filter
cannisters from 2.9" to 5.5" in diameter. The heavy
duty/racing FilterMags have a larger curve surface
that allows for a stronger magnetic field and a stronger
magnetic pull force, designed for more demanding
situations. Flat style FilterMags are also available for
automatic transmission pans and differential covers.
Standard Applications
FSS300 2.90"-3.20" 1.90" tall............. 49.99 ea
FSS365 3.50"-3.80" 2.20" tall............. 54.99 ea
FSS375 3.50"-3.80" 2.50" tall............. 59.99 ea
Heavy Duty/Racing Applications
FRA300 2.90"-3.20" 2.62" tall............. 79.99 ea
14961
A8700119
14962
1989 Turbo Trans Am Oil Drain Tube
Reproduction oil drain tube for 1989 Trans Am with
turbo engine. This tube connects the turbo to the engine
block so the turbo has fresh, cool oil to lubricate its
bearings. Drain tube block adapter fitting and gasket
are sold separately.
14961
1989 turbo oil drain tube ...... 73.99 ea
14962
1989 gasket .......................... 4.99 ea
A8700119 1989 adapter fitting .............. 18.99 ea
Oil & Oil Filters
Hot Rod Vintage Car Oil
Royal Purple® Engine Break In Oil
From the leader in racing lubricants,
now comes a lubricant designed
specifically for hot rods, street
rods, and vintage cars. Joe
Gibbs Driven Hot Rod Oil
builds on the formulation that
is used by thousands of racers
while adding critical additives
to protect engines. What can
you do? Check your oil bottles
for the API donut. If the oil you
currently use carries an API
donut, it probably lacks the
amount and type of formulated
anti-wear chemistry that historic
or racing engines need. Joe
Gibbs Driven Hot Rod Oil features high levels of
zinc for wear protection as well as US Military grade
rust and corrosion inhibitors for storage protection.
HR1506 10W30 quart........................ 10.99 ea
HR1507 10W30 case of 12 quarts ..... 131.99 cs
HR1606 15W50 quart........................ 10.99 ea
HR1607 15W50 case of 12 quarts ..... 131.99 cs
Engine builders have
grown increasingly
concerned that many
modern motor oils do not provide
adequate wear protection for new
engines, particularly those using
flat-tappet cams. Royal Purple
Break-in Oil is formulated to
allow optimal ring seal and protect
rotating assembly components such
as the camshaft and valve train from
initial start up wear. Royal Purple
combines highly refined mineral oil, preferred for
engine break-in, with advanced additives containing
high levels of zinc and phosphorus to optimize
protection in flat-tappet and roller engines. Fully
formulated and does not require the use of any other
chemical additives. Royal Purple recommends using
their high performance motor oils after the engine is
broken in for maximum engine performance.
RP11487 quart ...................................... 9.99 ea
RP11497 case of 12 .............................. 113.99 cs
Break-In Oil
1967-81 OEM Style Oil Filters
BR is used by Joe Gibbs
Racing to break-in and dyno all
their NASCAR Nextel Cup and
Nationwide Series engines. This
petroleum based oil provides
superior break-in properties for
flat-tappet engines. The special
additive package promotes ring
seal and provides maximum
protection for cams and lifters
during initial break-in. BR can
also be used to break in roller
cam engines, and as a general
purpose dyno oil.
BR106 15W50 quart........................ 8.99 ea
BR107 15W50 case of 12 quarts ..... 107.99 cs
BR114 15W50 2.5 gallon pail ......... 85.99 ea
Genuine AC Delco oil filters
for Chevrolet and Pontiac
L6 and V8 engines. These
replacement filters may not
be cosmetically correct to the
original filter depending on the
year of the vehicle. Each filter
fits correctly and is larger to
allow an additional 1/2 quart
of oil.
Royal Purple® Synthetic Oil
1967-69
1967-76
1977-79
1970-76
1978-81
1977
1977-81
1979-81
L6 models.....................
V8 models ....................
(w/o 301, 77 Olds 403)
L6 models (short) .........
V8 305, 350 (short) ......
V8 301 .........................
V6.................................
365, 301 Pontiac V8 .....
4.99
4.99
4.99
4.99
4.99
4.99
4.99
4.99
ea
ea
ea
ea
ea
ea
ea
ea
Triple Chrome Plating
for A Durable Shine!
Chrome Oil Filter Cover
Add protection to your
filter while achieving a high
performance look! This chrome
plated cover installs quickly and
looks great. Just slip the cover
over your oil filter and tighten
the set screw to just snug. Each
cover includes triple chrome plating for an extrabright finish. 3-11/16" I.D. x 5-3/16" tall.
T1067
.................................................. 9.99 ea
OE Style White
PF24 Oil Filter
Reproduction of the original
style white AC PF24 oil filter.
This filter is a brand new
PF24 Delco repainted classic
white and screen printed
with original blue and red
markings to provide a periodcorrect replacement.
Note: *Except 301 ci engines.
A8700117 1967-69 L6 ........................ 19.99 ea
A8700117 1967-76 V8........................ 19.99 ea
A8700117* 1977-79 V8 (77 Olds 403) 19.99 ea
The K&N Performance Gold® Oil Filter has been
constructed from the ground up to satisfy the vehicle
owner who wants the very best oil filter available.
The heavy duty construction provides up to 550 PSI
hydrostatic burst, and helps reduce the risk of rock
or stone damage. But the real quality isn’t just on the
outside, the inner filter element traps contaminants as
small as 10 to 20 microns in size. Metal top end caps are
used instead of paper to ensure that no unfiltered oil can
get back into the system. High volume positive oil flow
with low restriction coupled with exacting engineering
standards results in the right balance between engine
protection and low oil pump drag. Simply put, the K&N
oil filter is the very best filter money can buy.
HP2003 1968
250 ........................... 14.99 ea
HP2003 1968
400 ........................... 14.99 ea
HP2003 1968-69 350 ........................... 14.99 ea
HP2003 1969
250 w/1 bbl. ............. 14.99 ea
HP2003 1969-70 400 w/4 bbl. ............. 14.99 ea
HP2002 1970-76 250 w/1 bbl. ............. 14.99 ea
HP2003 1970-76 350 w/2 bbl. ............. 14.99 ea
HP2003 1971-79 400 w/4 bbl. ............. 14.99 ea
HP2003 1971-76 455 w/4 bbl. ............. 14.99 ea
HP2003 1972-74 400 w/2 bbl. ............. 14.99 ea
HP2003 1975-77 350 w/4 bbl. ............. 14.99 ea
HP2003 1977
403 w/4 bbl. ............. 14.99 ea
HP2002 1977
301 w/2 bbl. ............. 14.99 ea
HP1001 1977-80 231 w/2 bbl. ............. 14.99 ea
HP2006 1978-79 403 w/4 bbl. ............. 14.99 ea
HP2002 1978-79 350 w/4 bbl. ............. 14.99 ea
HP2002 1978-79 305 w/2 bbl. ............. 14.99 ea
HP1001 1979
301 w/2 bbl. ............. 14.99 ea
HP1001 1979-80 301 w/4 bbl. ............. 14.99 ea
HP2002 1980
305 w/4 bbl. ............. 14.99 ea
HP2002 1981-87 5.0L w/4 bbl. ........... 14.99 ea
HP1001 1981
4.9L w/4 bbl. ........... 14.99 ea
HP1001 1981
4.3L w/2 bbl. ........... 14.99 ea
HP1001 1981
3.8L w/2 bbl. ........... 14.99 ea
HP2002 1982-83 5.0L w/TBI .............. 14.99 ea
HP1001 1982-84 2.8L w/2 bbl. ........... 14.99 ea
HP1001 1982-83 2.5L w/TBI .............. 14.99 ea
HP1001 1984-86 2.5L w/FI ................. 14.99 ea
HP2002 1985-86 5.0L w/FI ................. 14.99 ea
HP1001 1985-86 2.8L w/FI ................. 14.99 ea
HP2002 1987-89 5.7L w/TPI............... 14.99 ea
HP2002 1987-89 5.0L w/TPI............... 14.99 ea
HP1001 1987
2.8L w/MFI ............. 14.99 ea
HP2002 1988
5.0L w/FI ................. 14.99 ea
HP2001 1988-89 2.8L w/FI ................. 14.99 ea
HP2002 1989-90 5.0L w/EFI............... 14.99 ea
HP3002 1989
3.8L w/FI ................. 14.99 ea
HP2002 1990-97 5.7L w/FI ................. 14.99 ea
HP2001 1990-92 3.1L w/FI ................. 14.99 ea
HP2002 1991-92 5.0L w/TPI............... 14.99 ea
HP2002 1991-92 5.0L w/TBI .............. 14.99 ea
HP1001 1993-95 3.4L w/FI ................. 14.99 ea
HP1001 1995-02 3.8L w/FI ................. 14.99 ea
HP1007 1998-02 5.7L w/FI ................. 14.99 ea
Oil Products
461
Royal Purple Motor Oil delivers superior
protection and improves performance in
four-cycle gasoline and diesel engines.
It increases horsepower and
torque, saves fuels and reduces
heat, wear and emissions. It has
unsurpassed oxidation stability
that allows for extended oil
drains and fewer oil changes,
which saves you time and money
and reduces the impact on the
environment. Royal Purple’s
motor oils for passenger cars and
trucks are API licensed. Royal
Purple’s performance advantages
come from a blend of synthetic
oils plus Royal Purple’s proprietary Synerlec
technology. Royal Purple Motor Oil is compatible
with other mineral and synthetic motor oils.
Quarts
RP01030 SAE30 quart........................ 11.99 ea
RP01520 5W20
quart........................ 9.99 ea
RP01530 5W30
quart........................ 9.99 ea
RP01130 10W30 quart........................ 9.99 ea
RP01140 10W40 quart........................ 9.99 ea
RP01250 20W50 quart........................ 9.99 ea
Gallons
RP04250 10W50 gallon ...................... 37.99 ea
Cases
RP12030 SAE30 case of 12 quarts ..... 129.99 cs
RP12520 5W20
case of 12 quarts ..... 107.99 cs
RP12530 5W30
case of 12 quarts ..... 107.99 cs
RP12130 10W30 case of 12 quarts ..... 107.99 cs
RP44250 20W50 case of 4 gallons ..... 136.99 cs
K&N Oil Filters
Note: Some filters may vary
cosmetically from the original application.
Each filter will fit as original and function properly.
PF24
PF24
PF24
PF454
PF454
PF44
PF47
PF47
Provides Up To 550Psi Hydrostatic Burst
And Traps Contaminants As Small
As 10 To 20 Microns!
Ignition Products
Street Fire HEI Distributor
8381
83651
1967-02 MSD Pro-Billet Distributors
These distributors feature a flawless lightweight CNCmachined 6061-T-6 billet aluminum housing and a
polished steel shaft that receives a QPQ, or Tuftride
coating. To accurately guide this shaft, MSD uses a
sealed ball bearing located at the top of the housing.
At the bottom of the housing, an extra long sintered
bushing controls the shaft. This combination keeps
the shaft spinning smooth and accurately throughout
10,000+ rpm. Other features include an iron drive
gear, Rynite® distributor cap with brass terminals and
a high output magnetic pickup to trigger the ignition.
Choose from the “standard” Pro-Billet distributors
that utilize the MSD 6, 7, 8 or 10 series ignition contol
box or from our “ready-to-run” distributors that are
internally controlled. “Ready-to-Run” distributors
do not require an external controller and are the
“plug-n-play” alternative to more expensive computer
controlled systems.
Street Fire value-line brand
components will offer a quality
designed alternative to the
bottom bargain parts that are
springing up all over. We’re
so assured with the
quality of our new Street
Fire HEI Distributor
that we provide a one year
warranty with it! We know the
importance of a centrifugal advance
in a distributor so our engineers
made sure that the Street Fire
received an advance assembly with
coated weights and welded weight
pins (not just pressed in like other
8362
models). Another area that you can
not afford to scrimp on is with a distributor gear.
The Street Fire is fit with the same gear that is used
on our Pro-Billet models. The metallurgy of this
gear has been refined for years to perform through
the harshest conditions. Inside, the ignition module
and coil work together to produce a stout spark to
light the fuel mixture for great performance. The
high voltage is transferred through a new rotor to the
brass terminals of the distributor cap and out to the
plugs. The Street Fire Distributor is the first product
to come from our new value branded ignition line.
8362
Street Fire HEI ........................ 149.99
8411
cap ........................................... 31.99
8410
rotor ......................................... 6.99
8402
coil cover ................................. 19.99
ea
ea
ea
ea
K
“Standard” Pro-Billet Distributors
For use with MSD 6, 7, 8 or 10 series ignition.
1967-02 Pontiac 326-455 ci
8563 ..................................................... 329.99 ea
8361 with vacuum advance .................. 259.99 ea
85551 with mechanical advance ............ 279.99 ea
84891 w/low profile flat-top crab cap .... 389.99 ea
85701 small diameter ............................. 309.99 ea
“Ready-to Run” Pro-Billet Distributors
Ready-to-run distributors are designed as a plug-n-play
distributor. No external ignition control box is needed.
1967-02 Pontiac 326-455 ci
8528 ..................................................... 399.99 ea
8360 w/optional vacuum advance ........ 339.99 ea
83651 HEI w/hi-energy module & coil.. 429.99 ea
8394 Digital E-Curve w/adj. timing..... 459.99 ea
1987-93 Chevrolet V6 and V8
83661 V8 w/dual connector coil ............ 329.99 ea
1993-97 Chevrolet LT-1 Engines
8381 1993-94 ....................................... 509.99 ea
83811 1995-97 ....................................... 509.99 ea
Replacement Parts For MSD Distributors
1967-02 Pontiac 326-455 ci
8433 dist. cap for 8563, 8528............... 39.99 ea
8467 rotor for 8563, 8528 .................... 9.99 ea
8433 cap for 8360, 8361, 85551 .......... 39.99 ea
84111 cap for HEI dist. 83651 ............... 44.99 ea
8433 cap for 8394 w/male term ........... 39.99 ea
8437 cap for 8394 w/female term ........ 24.99 ea
8431 cap for 85701 small dia. dist. ...... 39.99 ea
8541 cap for Flat-Top crab cap dist. .... 54.99 ea
8467 rotor for 8360, 8361, 8394, 85551 9.99 ea
8467 rotor for 85701 small dia. dist. .... 9.99 ea
84101 rotor for 83651 ............................ 15.99 ea
8531 dist. drive gear ............................... 31.99 ea
1987-93 Chevrolet V6 and V8
8406 V8, cap & rotor for 83661........... 29.99 set
84301 V6, cap & rotor for 83671........... 24.99 set
1993-97 Chevrolet LT-1 Engines
8481 cap & rotor for 8381 ................... 154.99 ea
84811 cap & rotor for 83811.................. 151.99 ea
462
Ignition Products
MSD Noise Filter
If you experience radio noise after installing the MSD
Ignition, you may need to install an MSD Noise Filter.
Electro Magnetic Interference (EMI) is occasionally
generated from the MSD power cables and can be
easily eliminated by installing the Noise Filter on the
heavy power supply wires coming from the MSD.
It is recommended that the Noise Filter be used on
installations with the MSD 7 and 8 Series Ignitions to
prevent this interference. Includes noise filter cover.
8200
Blaster Performance Coil
With a stock points style ignition, a ballast resistor
must be placed in-line with the positive terminal of the
coil. The following Blaster Coils are supplied with a
0.8 ohm ballast resistor plus a terminal and boot to fit
most applications. Mallory Unilite applications also
require the ballast resistor. Available in chrome or red
Important: The ballast is not necessary if an MSD 6 or 7
series ignition control is being used with
the points distributor.
8200
8203
Blaster 2 chrome ..................... 49.99 set
Blaster 2 red ............................ 54.99 set
Blaster SS Coil
Don’t let the compact size
of the Blaster SS Coil fool
you because it is packed with
performance. The efficient
E-core windings are designed
to produce high amounts of
current without sacrificing the
voltage output. In fact, when
used with an MSD 6 Series Ignition, the Blaster SS
produces 300 milliamps with a maximum voltage
output of 40,000 volts. The secondary windings are
wound on a segmented bobbin which reduces the
chance of voltage breakdown between the primary
and secondary windings. For more protection, these
windings are encased in a polyurethane compound
for complete protection against vibration. The Blaster
SS features brass terminals and a sturdy Rynite
housing. It is supplied with a 90º boot, terminal and
vibration mounts. A great addition to CD Ignitions
and some stock applications.
8207
Blaster SS Coil ......................... 54.99 ea
8830
MSD noise filter w/cover ........ 44.99 ea
6425
MSD 6A / 6AL Ignition Control
The following Blaster Coils share the same special
windings and high voltage output as the other Blaster
2 coils, but do not include a ballast resistor. When
you are using an MSD Ignition Control, the ignition
is responsible for delivering the voltage to the coil so
a ballast is not necessary. The Blaster 3 Coil features
an extra tall tower design to improve the coil wire
attachment and spark isolation and is supplied with a
90º terminal and boot.
MSD's new Digital 6A is the base model of the capacitive
discharge multiple spark 6 Series design. Features the
same footprint as the traditional 6A and 6AL, but with
a lower profile for a sleek look. Like all MSD 6 Series
Ignitions, the 6A will work with virtually any vehicle
as long as it has a 12-18 volt electrical system. It can
be triggered using breaker points, a magnetic pickup
or the output of an electronic amplifier. All necessary
parts and wiring instructions are included. Will work
on 4, 6 and 8 cylinder engines. The new Digital 6AL
shares the same proven circuitry of the Digital 6A
with the addition of a built-in adjustable rev limiter
with two top mounted rotary dials. The combination
of powerful sparks with the safety of a rev control is
what makes the Digital 6AL the most popular ignition
control in the world.
8202
8223
6201
6425
8202
8223
MSD Ignition System Coils
Blaster 2 .................................. 49.99 ea
Blaster 3 .................................. 49.99 ea
all V8 without rev limiter ........ 209.99 ea
all V8 with rev limiter ............. 259.99 ea
Ignition Products
Spark Guard
MSD’s Spark Guard is a dielectric
grease that solves many common
ignition troubles. It stops voltage
leaks, eases boot removal,
prevents moisture buildup
inside the spark plug wire
boots, and even helps protect
against radio noise (EMI). It
also simplifies the installation
of MSD Universal Spark
Plug Wire Sets. Spark Guard
will not dry up or harden so it
will retain its spark isolating
capabilities indefinitely.
Universal Super Conductor wires
shown with multi-angle boots
8804
.................................................. 19.99 ea
If you make
numbers
of plug
wires or do
a lot of custom
wiring, the new Pro-Crimp tool is a must for your
toolbox. The Pro-Crimp features interchangeable
jaws allowing for a variety of different style crimps
with one heavy duty tool. The Pro-Crimp features
a hardened steel frame with comfortable molded
hand grips. The slick ratchet action provides secure,
factory quality crimps every time. The Tool is
supplied with precision crimping/ stripping jaws for
MSD’s spark plug wire terminals.
35051
Multi-angle boots
90º boot
installed view
Pro-Crimp Tool
Pro-Crimp tool II ...................... 81.99 ea
Pro-Crimp Dies
These dies are for use with
MSD’s Pro-Crimp crimping
Tool #35051. A variety of
interchangeable dies are
available for a variety of jobs.
2-In-1 Universal Wire Sets
These universal spark plug wires sets are made from
MSDs Super Conductor performance wire. Universal
wire sets have only the spark plug boot and terminal
installed. These boots and terminals are available in
your choice of a 90º boot or a multi-angle boot. The
distributor end boots and terminals are supplied, but
not crimped on. Both sets include terminals for engines
with either the early style (socket) and late style (HEI)
distributor caps. The wires are extra long so they can
be cut to fit any application. Each set includes a MSD
Mini-Stripper crimper for easy installation. Available
with wires in either black or red.
90º Angle
31233
black .........................................
31239
red.............................................
Multi Angle
31193
black .........................................
31199
red.............................................
8843
................................................. 21.99 set
99.99 set
99.99 set
99.99 set
99.99 set
8920
3508
Amp pin terminal dies ..............
Amp lug terminal dies ..............
Plug wire terminal dies ............
Weathertight terminal dies .......
Deutsch terminal dies ...............
The MSD Pro-Clamp will keep the plug wires in a
tidy order and away from engine heat sources. Each
Separator features secure grooves for each wire and
a top bracket snaps in place to sandwich the wires in
place. Each base has a hole for a retaining screw if
desired and a tab that will help hold it in position. The
kit is supplied with two 4-wire separators, two 3- wire
separators and four 2-wire separators.
3506
3507
3508
3509
3510
Pro-Clamp Spark Plug Wire Separators
31.99
31.99
29.99
41.99
41.99
MSD Tachometer Adapter
ea
ea
ea
ea
ea
31363
8.5mm Super Conductor Spark Plug Wires
If you’re changing a coil or cap to a new design, you
could find yourself searching for different terminals
for the coil wire. MSD offers these two style coil
wires to make the change easy. Also, remember that
the coil wire sees eight times the use of each plug wire
so changing the coil wire as a maintenance through
the race season is recommended.
Important: *18” long, straight female socket coil
terminal and boot on one side with a straight female
socket distributor cap socket terminal and boot on the
other. **18” long, 90º male coil terminals and boots are
installed on both sides to connect to an HEI style terminal.
A terminal adapter is also supplied to adapt to a female
socket style distributor cap.
84049* 8.5mm Super Conductor .......... 15.99 ea
84039** 8.5mm Super Conductor, red ... 14.99 ea
84033** 8.5mm Super Conductor, black 15.99 ea
Important: *With wires over valve covers.
**Without turbo.
Red Wires
Pontiac
31369** 1975-92 260, 265, 301, 350 .. 89.99
31409
1981-02 267, 305 .................. 99.99
31359* 1977-82 ................................ 84.99
31409
1978-82 w/HEI ..................... 99.99
32149
1993-97 LT1 ......................... 129.99
32819
1998-02 LS1 ......................... 71.99
Black Wires
Pontiac
31363** 1975-92 260, 265, 301, 350 .. 89.99
31353* 1977-82 w/HEI ..................... 84.99
32043
1993-97 LT1 ......................... 129.99
32813
1998-02 LS1 ......................... 71.99
Important: *For use on non-current limiting ignitions,
originally equipped with a ballast resistor. **For use on
current limiting ignitions, not originally equipped with a
ballast resistor.
8910*
points or amplifier .................... 51.99 ea
8910E** points or amplifier .................... 54.99 ea
8920
magnetic pickup ....................... 69.99 ea
set
set
set
set
set
set
set
set
set
set
MSD 6 Series Vibration Mounts
In performance applications such as off-road, racing,
and marine applications, strong vibrations can be
transmitted through the chassis to the MSD unit.
To protect the MSD from excessive vibration, we
recommend this vibration mount set.
8823
.................................................. 14.99 set
Ignition Products
463
84039
Coil Wires
These wires have extremely low resistance combined
with the ability to suppress electro magnetic
interference. The Super Conductor uses a copper alloy
conductor resulting in less than 50 ohms per foot of
wire. This ensures that the most energy possible makes
it to the spark plug. This combination is encased in
a heavy duty sleeve that will withstand abrasion and
high temperatures.
MSD tach adapters will correct the operation of most
voltage triggered tachometers or fuel injection systems
that do not work directly off the tach output terminal of
the MSD ignition unit. If you are triggering an MSD
Blaster, 5, 6, SCI, or 7 series ignition with its white
wire or points terminal, you will need item # 8910 or
8910E. For applications using green and violet wires
for magnetic pickup input, use item # 8920
Mallory Ignition Products
25042X
400
4748201
309
3748201
2091M
2748201
2658001
Dual Point Ignition
Economical Dual Point Ignition distributors have
heavy duty dual points for increased RPM range and
coil output. Choose from our mechanical advance
or vacuum advance models. Also available for those
running a mechanical tach is a mechanical advance
model with mechanical tach drive output.
Pontiac V8
2558001 w/mechanical advance ..........
2658001 w/mech. adv. & tach drive ....
2758001 w/vacuum advance ...............
2548201 w/mechanical advance ..........
2748201 w/vacuum advance ...............
349.99 ea
494.99 ea
409.99 ea
219.99 ea
234.99 ea
Unilite Electronic Ignition
Unilite Electronic Ignition distributors use Mallory’s
Unilite module and can trigger either a HyFire
capacitive discharge ignition or be run with just a
coil. Each distributor features an easy 3-wire hookup.
Choose from our mechanical advance or vacuum
advance models. Also available for those running a
mechanical tach is a Unilite mechanical advance model
with mechanical tach drive output.
Mechanical Advance Distributors
Pontiac V8
3758001 301-455 ................................. 319.99 ea
3748201 all .......................................... 284.99 ea
Mechanical Advance With Tach Drive
3848201 all .......................................... 469.99 ea
Vacuum Advance Distributors
Pontiac V8
4758001 301-455 ................................. 329.99 ea
209M
Tune-up parts for Mallory breaker point distributors.
Performance Points
25042X all series ...................................
Condensor
400
all series (except 27) ................
401
27 series ...................................
Distributor Cap
209M
all 8 cyl. series ..........................
270
all 6 cyl. series ..........................
Distributor Rotor
309
all series (except 27) ................
310
27 series....................................
Distributor Cap & Rotor
2091M all 8 cyl. series ..........................
Vacuum Advance
29332
27 series....................................
K
605
5748201
Magnetic Breakerless Ignition
Magnetic Breakerless Ignition distributor uses Mallory’s
MBI (Magnetic Breakerless Ignition) triggering system
and can trigger either a HyFire capacitive discharge
ignition or be run with just a coil. Each distributor features
an easy 3-wire hookup. Choose from our mechanical
advance or vacuum advance models.
Pontiac V8
5758001 w/vacuum advance ............... 429.99 ea
5048201 w/mechanical advance .......... 359.99 ea
5748201 w/vacuum advance ............... 374.99 ea
464
1987-93 Fuel Injection HEI/FI Dist.
7.99 ea
8.99 ea
21.99 ea
24.99 ea
6.99 ea
6.99 ea
24.99 set
34.99 ea
29349
Mallory Breakerless Distributor Parts
HEI/FI 80 series distributors are designed to work
with factory fuel injection systems used on popular
GM V8 engines. High output magnetic trigger
for stronger signal throughout the RPM range.
Precision CNC-machined billet aluminum housing.
Exclusive Mallory distributor cap with added crossfire
protection. Unique ball bearing/bushing-supported
oversized hardened shaft for maximum timing
stability. Direct plug-in replacement for factory
distributor. The output of the distributor works the
factory computer system making it the ideal plugand-play upgrade on these engines.
8048204 1987-93 V8 w/FI exc. LT-1 .. 319.99 ea
Mallory Performance Ignition
19.99 ea
209M
310
5048201
29332
Mallory Breaker Point Distributor Parts
Tune-up parts for Mallory breakerless distributors.
Module
605
all series (except 50 & 57) ......
Distributor Cap
209M
all 8 cyl. series .........................
270
all 6 cyl. series .........................
Distributor Rotor
335
37 & 38 series .........................
322
47 series 8 cyl. .........................
309
50 series...................................
310
57 series...................................
Harness
29349
all series...................................
89.99 ea
21.99 ea
24.99 ea
12.99
14.99
6.99
6.99
ea
ea
ea
ea
14.99 ea
Mallory Ignition Products
947
202M
303M
29212
8mm Universal Fit Spark Plug Wire Sets
Mallory top-of-the-line spiral core Pro Sidewinder
spark plug wire sets feature a low resistance spiral core
that delivers high energy output for maximum spark
at the plug. Great RFI suppression meets the demands
of today’s on-board electronics, such as electronic
ignition, sound systems, and computer controls. 8MM
ozone-resistant red silicone jacket repels water, oil,
grease and fuel. Withstands temperatures up to 500
degrees. Universal applications.
401
Important: Wires are not terminated at cap end.
947
45º spark plug boots ................. 74.99 set
607
29210
M612
29217
1967-93 GM Distributor Tune-Up Parts
If your vehicle is equipped with a V8 engine and a GM
factory distributor, upgrade to Mallory components
during your next tune-up. You’ll enjoy increased
performance, longer life and maximum dependability.
Distributor Cap
202M
1967-74 V8 breaker point. .
261
1974-90 V8 HEI. ................
265M
1987-93 V8 w/FI exc. LT-1
Rotor Cap
303M
1967-74 V8.........................
362
1974-90 V8 HEI. ................
366
1987-93 V8 w/FI exc. LT-1
Distributor Cap & Rotor Set
525
1974-90 V8 HEI. ................
520
1987-93 V8 w/FI exc. LT-1
Distributor Condensor
401
1967-74 V8.........................
Ignition Control Module
607
1974-87 V8 HEI., 4 prong..
M612
1987-93 V8 w/FI exc. LT-1
Pick Up
29789
1987-93 FI Distributor........
25.99 ea
34.99 ea
29.99 ea
13.99 ea
14.99 ea
9.99 ea
1967-93 Mallory Performance Coils
Replace your stock coil with a Mallory high
performance coil for increased performance, longer life
and maximum dependability. A variety of applications
are available for your Classic Chevrolet engine.
Ignition Coil for Breaker Point Ignition
29217
1967-74 V8 chrome............ 49.99 ea
In-Cap Ignition Coil for HEI Ignition
29212
1974-90 V8 HEI. ................ 71.99 ea
External Ignition Coil for HEI Ignition
29210
1987-93 V8 w/FI exc. LT-1 59.99 ea
29101
High Temperature Wire Divider Kits
Each kit contains two 4-hole brackets, two 3-hole
brackets, and two 2-hole brackets.
29101
29102
red............................................. 34.99 set
black ......................................... 34.99 set
59.99 set
49.99 set
8.99 ea
31.99 ea
71.99 ea
54.99 ea
774
1967-74 Mallory E-Spark Conversion Set
This self-contained conversion kit fits neatly within
a stock GM or Mallory distributor cap, so it looks
like original from the outside. Thanks to specialized
electronic circuitry and an infrared signal, you’ll never
again have moving parts to wear out, and you gain
better performance, drivablity, and throttle response,
plus improved fuel efficiency!
Delco Distributor
61001M 1967-74 all w/window cap .... 65.99 set
Unilite Conversion For GM Distributors
Unilite conversion kits for point distributors put an
end to high maintenance point ignition systems by
installing a proven Mallory Unilite ignition conversion
kit. Features include more accurate ignition timing than
any other type of system, improves performance and
fuel efficiency, easy to install with simple hand tools,
reduced maintenance (never change points again) and
latest thermal-clad-based surface mount construction
for maximum dependability and long life.
501
1967-74
8 cyl..................... 129.99 set
Important: Wires are not terminated at cap end.
Pro Wire Black
775
90º spark plug boots .................
774
straight spark plug boots ..........
703
Sprint Wire Yellow
766
Mallory Performance Ignition
49.99 set
54.99 set
59.99 set
44.99 set
465
8MM Silicone Jacketed Spark Plug Wires
Pro Wire and Sprint Wire 8MM silicone jacketed
wire sets feature high tech CIF (Carbon Impregnated
Fiber) core for great energy delivery at an affordable
price. CIF core provides RFI suppression for even the
most sensitive on-board electronics, such as electronic
ignition, sound system or computer controls. 8MM
ozone-resistant silicone jacket repels water, oil, grease
and fuel. Withstands temperature up to 500 degrees.
Universal applications.
Performance Ignition
HEI In-Cap Coil Low Ohms Contact Brush
The standard OE carbon brush in GM’s HEI in-cap coil
distributor has a very high (5k to 10k Ohms) resistance.
When an aftermarket capacitive discharge ignition
system, such as an ACCEL, Mallory, Crane, Holley or
MSD unit is installed, this high resistance can create
enough heat to melt the distributor cap. ACCEL’s low
Ohm contact brush solves this problem because it passes
virtually all the energy to the rotor without causing
excessive heat build up.
ACCEL Tachometer Adapter
8140
8140C
8145C
8145
120900
.................................................. 14.99 ea
Important: If you are using the output signal directly
from the magnetic pickup inside the distributor to trigger
the ACCEL 275+ or 300+ CD ignition control, and your
tachometer is not functioning properly,then you will need a
different tach adapter, such as Mallory p/n 29078.
140001
8140HV
If your tachometer fails to operate after installing either
of the ACCEL 275+ or 300+ CD ignition controls, you
may need a tach adapter. The green lead in the wire
harness from the ACCEL 275+ or 300+ ignition control
produces a 12 volt square wave signal. This can be used
with most tachometers. If the tachometer still does not
function properly you will need a tach adapter. If your
tachometer was triggered from the coil negative terminal
(voltage trigger) and you are using the white lead via
either points, electronic ignition amplifier output or
OE module to trigger the ACCEL 275+ or 300+ CD
ignition control, then you need this ACCEL tach adapter.
29074
8132
................................................. 44.99 ea
110128
140005
100108
140015
35361
140011
Mallory Tachometer Adapter
140017
35363
35362
140024
1967-95 GM Distributor Tune-Up Parts
1967-01 Accel High Performance Coils
If your vehicle is equipped with a V8 engine and a GM
factory distributor, upgrade to Accel components during
your next tune-up.
Replace your stock coil with an Accel high performance
coil for increased performance, longer life and
maximum dependability. A variety of applications are
available for breaker point and breakerless ignition.
K
Distributor Cap
120137 1987-93 V8 w/FI exc. LT-1.. 34.99
Rotor Cap
130120 1974-86 V8 HEI. ................. 14.99
130137 1987-93 V8 w/FI exc. LT-1.. 19.99
Distributor Cap & Rotor Set
8120
1967-74 V8 breaker point .... 29.99
8122
1974-86 V8 HEI. ................. 29.99
8131
1985-87 V8 5.7 w/in cap coil 29.99
8132
1987-93 V8 w/FI exc. LT-1.. 29.99
Distributor Condensor
100108 1967-74 V8 .......................... 14.99
Points
110127 1967-74 std. performance .... 24.99
110128 1967-74 high performance. .. 24.99
Ignition Control Module
35361
1974-87 HEI., 4 prong ......... 44.99
35363
1981-90 HEI., 7 prong ......... 55.99
35362
1986-90 GM dist# 1103749 . 54.99
35370E 1990-95 GM dist# 1103880 . 75.99
466
Some applications with a tachometer need a voltage
spike signal from the negative side of the coil before
they will operate properly. This signal changes when a
high inductive storage or capacitive discharge electronic
ignition control is installed. The tachometer adapter
develops a voltage spike that will run most voltage
triggered tachometers and current (series) triggered
tachometers. The tachometer adapter works with any
inductive storage or capacitive discharge electronic
ignition control triggered by points or electronic
amplifier trigger. For vehicles w/inductive or capacitive
discharge for factory style tach.
29078
..............................................
154.99 ea
ea
ea
ea
set
set
set
set
ea
ea
ea
ea
ea
ea
ea
Ignition Coil
42,000 Volt Coil - Breaker Point Ignition
8140C
1967-74 chrome. .................... 44.99 ea
8140
1967-74 yellow ...................... 44.99 ea
45,000 Volt Coil - Breaker Point or Breakerless Ignition
140001 1967-74 super coil ................. 84.99 ea
45,000 Volt Coil for Breakerless Ignition
8145C
1967-74 chrome. .................... 49.99 ea
8145
1967-74 yellow ...................... 44.99 ea
8140HV 1967-74 high vibration .......... 55.99 ea
45,000 Volt HEI In-Cap Super Coil with Cover
140003 1974-87 w/red & yellow wires 74.99 ea
140005 1974-87 w/red & white wires 74.99 ea
48,000 Volt HEI In-Cap Super Coil
140013 1974-87 w/red & yellow wires 79.99 ea
140015 1974-87 w/red & white wires 94.99 ea
Cover for 48,000 Volt HEI In-Cap Super Coil
48,000 Volt HEI Remote Mount Super Coil
140011 1984-95 ................................. 51.99 ea
140024 1996-01 ................................. 54.99 ea
45,000 Volt AC/Delco Style DIS Super Coil
140017 1986-01 ................................. 49.99 ea
Mallory 611M Power Cell
Improve performance, increase spark plug life, and
enjoy better fuel economy with this universal power
cell. This Mallory Ignition Power Cell maintains
a constant coil output voltage up to 6500 RPM on
stock electronic ignition systems. It delivers smoother
engine operation while improving the efficiency of
combustion with a more consistent spark. C.A.R.B.
approved and 50 state legal.
611M
Mallory Power Cell .................. 39.99 ea
SUPER STOCK
Fiberglass/
High Density,
High Durometer
Applications: Performance upgrade Kevlar
EPDM Insulation
Stranded
to OE-type/ replacement-type
Inner Core
Features: Silicone spark plug boots,
yellow, blue, red, & black silicone
wire, zinc-plated steel spark plug
terminals
Benefits: Efficient transmitter of
ignition energy, popular priced
performance, oversized upgrade
where OE is 7mm
Conductive High
Construction: 8mm, 450° F silicone Resistance Carbon Graphite
Suppression Material
& EPDM rubber construction with a
fiberglass braid
Core: Carbon/graphite conductive material, high resistance
suppression, fiberglass/Kevlar, 3000-7000 Ohms/foot resistance
8.0MM High Gloss
Yellow, Blue, Black
or Red 450°F
Silicone Jacket
8.8MM WIRE
Fiberglass Braid
4021
4040
4041
8mm
8mm
8mm
yellow (6 cyl. only) .............................................. 41.99 set
yellow, blue, black, red (specify color) (8 cyl) .... 39.99 set
yellow, blue, black, red (specify color) (8 cyl) .... 39.99 set
8MM
SUPER STOCK SPIRAL
Applications: Late model car &
Fiberglass/
Kevlar
Stranded
High Density,
High Temperature,
High Durometer
Fiberglass/
Kevlar
Stranded
Inner Core
8.0MM High Gloss
Yellow, Blue, Black
or Red 550°F
truck coverage
Inner Core Silicone Insulation Silicone Jacket
Features: Color-matched silicone
spark plug boots, high gloss blue,
black, red & yellow wire, stainless
steel spark plug terminals
Benefits: True performance upgrade,
Carbon
increased ignition energy due to
Graphite
lower resistance, oversized upgrade
Semi-Reactive
where OE is 7mm
Element
Fiberglass Braid
Heavy Gauge
Construction: 8mm, 550° F double
Stainless Steel
Alloy Conductor Conductive Coating
silicone construction with a fiberglass
braid
Core: Spiral wound stainless steel alloy conductor, magnetic suppression &
semi-reactive material, fiberglass/Kevlar core,
500 Ohms/foot resistance
Applications: Performance street/
strip
Features: 8.8mm oversized wire,
oversized 8.8mm silicone spark
plug boots, high gloss yellow wire,
stainless steel spark plug terminals
Benefits: True performance
upgrade, increased ignition energy
due to lower resistance
Construction: 8.8mm, 550° F
double silicone construction with a
fiberglass braid
Core: Spiral wound stainless
steel alloy conductor, magnetic
suppression, semi-reactive material,
fiberglass/Kevlar core, 500 Ohms
per foot resistance, also available
with carbon/graphite core
High Density,
High Temperature,
High Durometer
Silicone Insulation
Carbon
Graphite
Semi-Reactive
Element
Heavy Gauge
Stainless Steel
Alloy Conductor
High Density,
High Temperature,
High Durometer
Silicone Insulation
Fiberglass/
Kevlar
Stranded
Inner Core
Conductive
High Resistance
Carbon Graphite
Suppression
8.8MM High Gloss
Yellow 550°F
Silicone Jacket
Fiberglass Braid
Conductive Coating
8.8MM High Gloss
Yellow 550°F
Silicone Jacket
Fiberglass Braid
8031
8033
8036
8021
8022
8023
8026
8.8mm
8.8mm
8.8mm
8.8mm
8.8mm
8.8mm
8.8mm
spiral core - yellow ......................................................
carbon/graphite core - yellow ....................................
89.99 set
89.99 set
79.99 set
84.99 set
84.99 set
84.99 set
79.99 set
5040
5041
8mm
8mm
yellow, blue, black, red (specify color) .................... 59.99 set
yellow, blue, black, red (specify color) .................... 59.99 set
300+
RACE WIRE
Applications: Race engine
All Kevlar
Stranded
Inner Core
High Density,
High Temperature,
High Durometer
Silicone Insulation
8.0MM High
Gloss Black 600°F
Silicone Jacket
configurations
Features: Silicone spark plug boots,
black wire, stainless steel spark plug
terminals
Benefits: Maximum energy to spark
plug, heaviest gauge conductor
Ferrite
in the industry, 8.8mm oversized
EMI/RFI
racing wire, complete suppression
Suppression
of EMI/RFI (radio noise)
Fiberglass Braid
Heavy Gauge
Element
Stainless Steel
Construction: 8.8 mm, 600° F
Alloy Conductor Conductive Coating
double silicone construction with a
fiberglass braid
Core: HD gauge spiral wound copper/nickel alloy conductor, magnetic
suppression & fully reactive ferrite material, all Kevlar core,
150 Ohms/foot resistance
8.8mm
spiral core - black ....................................................... 99.99 set
All Kevlar
Stranded
Inner Core
High Density, High
Temperature
High Durometer
Silicone Insulation
8.8MM High Gloss
Black 600°F Silicone
Jacket
Increase ignition energy with
these incredibly low resistance
severe-duty spark plug wires!
These 8mm wires are designed
for forced induction, HD truck,
Ferrite
and racing applications. These
EMI/RFI
Suppression
wires can withstand up to 600° F
Fiberglass Braid
Heavy Gauge
Element
while offering a mere 500 ohm/ft
Copper-Nickel Alloy
Conductor
of resistance and complete EMI/
Conductive Coating
RFI suppression. The ceramic
plug boots and stainless steel
terminals withstand temperatures up to 2000° F. Compatible with both pre and
post HEI systems.
Important: Universal 8 cylinder sets can be used for 6 cylinder applications.
A8700197 8mm black with straight white ceramic boots .................. 101.99 set
A8700198 8mm black with 90° white ceramic boots ........................ 101.99 set
A8700199 8mm black with 45° white ceramic boots ........................ 101.99 set
Year
Engine, Model & Notes
SuperStock
SuperStock
Spiral
300+
Race
8.8mm
Spiral
8.8mm
C/G
1967-74
1967-74
1974-81
1975-76
1977-79
1977-86
1977-87
1978-81
1980-81
1982-92
1987-92
8 cyl. w/point ignition
6 cyl. w/point ignition
8 cyl. Pontiac eng. w/HEI, except turbo
6 cyl. w/HEI
8 cyl. Oldsmobile eng.
8 cyl. Chevrolet eng. (8) 90 boots
6 cyl. 3.8, 4.1
8 cyl. Buick eng.
8 cyl. 4.9 301 Turbo engine
6 cyl. 2.8, 3.1
8 cyl. Chevrolet eng. (8) 90 boots
4040,B,K,R
4021
4040,B,K,R
4021
4040,B,K,R
4041,B,K,R
4021
4040,B,K,R
•
4021
•
5040B,K,R,Y
5040B,K,R,Y
5040B,K,R,Y
5040B,K,R,Y
5040B,K,R,Y
5041B,K,R,Y
5040B,K,R,Y
5040B,K,R,Y
•
5040B,K,R,Y
•
7032
7032
7033
7033
7033
•
7033
7033
7033
7033
•
8033
8036
8033
8036
8033
8031
8036
8033
8033
8036
8031
8022
8026
8023
8026
8023
8021
8026
8023
•
8026
8021
Extreme
9000
A8700197
A8700197
A8700197
A8700197
A8700197
A8700198
A8700197
A8700197
•
A8700197
•
467
7032
EXTREME 9000
Ceramic Wires
Underhood Wiring Conduit
De-Clutter Your Engine Bay!
Take the ugly out of your electrical wiring with HAL
STUFF wiring conduit. All of the major components are
triple chrome plated or are polished 304 stainless steel.
Choose from a complete starter set with accessories, or
piece together your own custom application!
Complete Conduit Starter Set
Is your hood hiding a mess of wiring and vacuum lines?
De-clutter your engine bay with this conduit set! This set
includes 15 feet of 1/2" polished stainless steel flexible
conduit, enough for most applications, as well as six
chrome 1/2" conduit terminators, two 1.50" x 2" chromed
aluminum enclosures, chrome aluminum firewall pass
through, and twelve 1/2" nickel-plated mounting clips.
42565
............................................... 129.99 ea
42580
Flexible Stainless Steel Conduit
42563
Billet Choke Covers
K
These chrome-plated choke covers enhance the
appearance of dressed engines by covering the plastic
choke on Edelbrock, Demon, and Holley carburetors.
Each billet aluminum cover comes with a snap-in
louvered insert. Available as an individual cover or as
a kit with polished stainless steel conduit.
42567
choke cover ............................. 23.99 ea
42563
choke cover kit ........................ 44.99 ea
Customize your engine bay with this polished stainless
steel conduit! Flexible enough to be routed in virtually
any shape or direction, this conduit protects wiring
and vacuum lines while providing a clean, clutter-free
appearance under the hood.
42571 1/4" conduit 5 foot roll ............... 12.99 ea
42561 3/8" conduit 10 foot roll ............. 29.99 ea
42560 1/2" conduit 10 foot roll ............. 34.99 ea
42559
42558
Conduit Termination Accessories
Organize your stainless steel conduit with these chrome
plated terminators! These connectors and terminators
accent your engine bay while protecting wires and
hoses from engine heat, dirt, and debris. Available in
three diameters with a common thread size for each
to fit the end caps and tees.
42580 1/4" terminator ........................... 4.99 ea
42551 3/8" terminator ........................... 4.99 ea
42550 1/2" terminator ........................... 4.99 ea
42559 terminator end cap...................... 3.99 ea
42558 t-fitting ...................................... 7.99 ea
42557
Firewall Pass Through Enclosure
Compliment your stainless steel conduit with this
firewall pass-through! This chrome-plated aluminum
enclosure makes it easy to pass wires through to the
engine compartment. Machined with two holes for
terminators and fitted with a rubber grommet for
firm seal. Includes stainless mounting hardware and
cover gasket.
Note: Enclosure does not include conduit or terminators.
42564
468
...............................................
24.99 ea
42552
Universal Aluminum Enclosures
Clean up junction blocks and terminals with these
chrome-plated aluminum enclosures! These universal
enclosures feature a ball milled style cover and can be
used as junction or termination blocks for wiring when
incorporated with the flexible stainless steel conduit
termination fittings.
Note: Enclosures do not include holes for mounting or
conduit terminator installation.
42556
42557
small
large
1.50" x 2" ...................... 13.99 ea
2.062" x 2.562" ............. 16.99 ea
HAL Stuff Underhood Wiring Conduit
Conduit Mounting Clips And Brackets
These bright nickel plated clips secure your stainless
conduit to keep your installation looking clean and
professional. Use with the chrome plated universal
mounting brackets to allow spacing from fender wells,
fire walls or can even be used on the engine.
42552 3/8" mounting clips (12 pk) ....... 5.99 set
42553 1/2" mounting clips (12 pk) ....... 5.99 set
42555 universal mounting bracket ........ 5.99 ea
Ignition Wires
A9720017
Thunder Volt 50 Ignition Wires
A970101K
A970105B
Taylor Thunder Volt 10.4mm ignition wires are dyno
tested and proven with increases up to 5 horsepower and
7 pounds of torque. Designed with a Ferrite spiral-wound
core coated with a blend of copper/nickel bonded with a
conductive acrylic cover to provide low resistance at only
40 ohms per foot with optimum RFI and EMI suppression.
Features a tightly woven heat treated fiberglass braid and
a 3-layer 100% Zimplex silicone outer jacket for heat
protection up to 600 degrees with a 102,000 volt dielectric
strength. Available in black with gold lettering and low
profile color coordinated silicone boots. Universal wire
sets include both standard socket and HEI boots with
the appropriate terminals. Made in USA.
Universal Fit 8 Cylinder Sets
A9720010 90° boots .............................. 139.99 set
A9720011 135° boots ............................ 139.99 set
A9720012 180° boots ............................ 139.99 set
Custom Race Fit Over Valve Cover Sets
Small Block Chevy
A9720014 HEI & 90° boots .................. 129.99 set
Pontiac V8
A9720017 socket & 135° boots ............ 129.99 set
A9720018 HEI & 135° boots ................ 129.99 set
Custom Race Fit Under Header Wire
Small Block Chevy
A9720016 HEI & 90° boots .................. 129.99 set
Custom Fit Model Specific Sets
A9720021 1993-97 5.7L LT1 ............. 129.99 set
A9720022 1999-02 5.7L LS1 ............. 79.99 set
Thunder Volt 8.2 Ignition Wires
A9720025
1974-90 Taylor SST Shielded Ignition Wires
Taylor SST Shielded 8mm wires complement any engine
with chrome, polish, or braided lines. A spiral wound
conductor layered in two layers of a synthetic silicone
blend jacketed with a braided tin coated copper cover and
blue silicone boots offers protection up to 550 degrees.
Note: Installation requires the use of an included
grounding kit.
Small Block Chevy
Over Valve Cover Wires
A9720024 1974-80 HEI & 90° boots .....
A9720025 1974-90 HEI & 135° boots ...
A9720026 1978-86 HEI & 90/180° boot
Pontiac V8
Over Valve Cover Wires
A9720029 1964-75 socket & 135° boots
79.99 set
79.99 set
79.99 set
79.99 set
A970120B
Taylor 409 Pro Race Ignition Wires
Taylor 409 Pro Race 10.4mm high performance ignition
wires are designed for street and track performance.
Featuring tightly woven heat treated fiberglass
braid over a 100% silicone Spiro-Pro ignition wire
providing a 3-layer jacket these wires have a 102,000
volt dielectric strength and thermal protection to 600
degrees. The spiral wound core with 350 ohm resistance
per foot has excellent EMI and RFI suppression making
them perfect for extreme electronic ignition systems.
Available in black, red, and blue with low profile
silicone Pro Boot spark plug boots. Universal wire
sets include both standard socket and HEI boots with
the appropriate terminals. Made in USA.
A970112K black 90° boots ................. 114.99 set
A970112R red
90° boots ................. 114.99 set
A970112B blue
90° boots ................. 114.99 set
A970113K black 135° boots ............... 114.99 set
A970113R red
135° boots ............... 114.99 set
A970113B blue
135° boots ............... 114.99 set
A970114K black 180° boots ............... 114.99 set
A970114R red
180° boots ............... 114.99 set
A970114B blue
180° boots ............... 114.99 set
Custom Race Fit Over Valve CoverSets
Small Block Chevy
A970116R red
HEI & 90° boots ..... 114.99 set
A970116B blue
HEI & 90° boots ..... 114.99 set
Pontiac V8
A970119R red
socket & 135° boots 114.99 set
A970119B blue
socket & 135° boots 114.99 set
A970120R red
HEI & 135° boots ... 114.99 set
A970120B blue
HEI & 135° boots ... 114.99 set
Small Block Chevy
A970118R red
HEI & 90° boots ..... 114.99 set
A970118B blue
HEI & 90° boots ..... 114.99 set
Custom Fit Model Specific Sets
1993-97 Wire Sets
A970123R red 5.7L LT1 ................... 114.99 set
A970123B blue 5.7L LT1 ................... 114.99 set
1999-02 Wire Sets
A970124R red 5.7L LS1................... 69.99 set
A970124B blue 5.7L LS1................... 69.99 set
Ignition Wires
469
Taylor Thunder Volt 8.2mm ignition wires are dyno
tested and proven to increase horsepower and torque.
Designed with a Ferrite spiral-wound core coated with
a blend of copper/nickle bonded with a conductive
acrylic cover for only 40 ohms per foot of resistance
with optimum RFI and EMI suppression. A 2-layer
100% Zimplex silicone outer jacket for heat protection
up to 600 degrees. Available in black, red, or blue with
grey silicone spark plug boots. Universal wire sets
include both standard socket and HEI boots with the
appropriate terminals. Made in USA.
A970101K black 90° boots .................. 74.99 set
A970101R red
90° boots .................. 74.99 set
A970101B blue
90° boots .................. 74.99 set
A970102K black 135° boots ................ 74.99 set
A970102R red
135° boots ................ 74.99 set
A970102B blue
135° boots ................ 74.99 set
A970103K black 180° boots ................ 74.99 set
A970103R red
180° boots ................ 74.99 set
A970103B blue
180° boots ................ 74.99 set
Custom Race Fit Over Valve Cover Sets
Small Block Chevy
A970105K black HEI & 90° boots ...... 69.99 set
A970105R red
HEI & 90° boots ...... 69.99 set
A970105B blue
HEI & 90° boots ...... 69.99 set
Small Block Chevy
A970107K black HEI & 90° boots ...... 69.99 set
A970107R red
HEI & 90° boots ...... 69.99 set
A970107B blue
HEI & 90° boots ...... 69.99 set
A970114R
Ignition Wires
Oem Style Spark Plug Wire Kits Designed To Replace
The Original Wires For 1974-02 Firebird Models.
QW843
Includes correct coded production dates!
Available from 1967-74
Includes correct Packard
TV R Suppression markings
Officially licensed by General Motors
1967-74 Date Coded Spark Plug Wire Set
Classic Industries® stocks reproductions of the original
style Delco Packard plug wires used with 1967-74
Firebird models. Each wire includes the original style
lettering with the wording Packard TV R Suppression.
All wires are date coded based on the production
quarter of the vehicle. "1Q" indicates the first half of
the production model year and "3Q" indicates the 2nd
half of the production year. Wiring sets are produced
for Firebird models with original exhaust manifolds.
* w/o unitized distributor
K
Note: These are not for use with after market type headers
or after market manifolds. Wiring may be applicable for use
with other manifolds or headers but are not guaranteed to
fit. 3Q dated plug wires may be correct for use on vehicles
manufactured in the first months of the succeeding years
production.
2026663
2026671
2352663
2352671
2350663
2350671
2026673
2026681
2354673
2354681
2354681
2354681
2026683
2026691
2354683
2354691
2354683
2354691
36435
36436
2354693
2354701
36437
36438
2360703
2360711
2362703
2362711
36439
36440
2364713
2364721
36441
36442
2364723
2364731
36443
36444
2364733
2364741
470
1967
1967
1967
1967
1967
1967
1968
1968
1968
1968
1968
1968
1969
1969
1969
1969
1969
1969
1970
1970
1970
1970
1971
1971
1971
1971
1971
1971
1972
1972
1972*
1972*
1973
1973
1973*
1973*
1974
1974
1974*
1974*
L6-OHC
L6-OHC
V8 with AC
V8 with AC
V8 w/o AC
V8 w/o AC
L6-OHC
L6-OHC
V8 with AC
V8 with AC
V8 w/o AC
V8 w/o AC
L6-OHC
L6-OHC
V8 with AC
V8 with AC
V8 w/o AC
V8 w/o AC
L6
L6
V8
V8
L6
L6
V8, 455ci HO
V8, 455ci HO
V8, w/o 455
V8, w/o 455
L-6
L-6
V8
V8
L6
L6
V8
V8
L6
L6
V8
V8
3-Q-66 .....
1-Q-67 .....
3-Q-66 .....
1-Q-67 .....
3-Q-66 .....
1-Q-67 .....
3-Q-67 .....
1-Q-68 .....
3-Q-67 .....
1-Q-68 .....
3-Q-67 .....
1-Q-68 .....
3-Q-68 .....
1-Q-69 .....
3-Q-68 .....
1-Q-69 .....
3-Q-68 .....
1-Q-69 .....
3-Q-69 .....
1-Q-70 .....
3-Q-69 .....
1-Q-70 .....
3-Q-70 .....
1-Q-71 .....
3-Q-70 .....
1-Q-71 .....
3-Q-70 .....
1-Q-71 .....
3-Q-71 .....
1-Q-72 .....
3-Q-71 .....
1-Q-72 .....
3-Q-72 .....
1-Q-73 .....
3-Q-72 ....
1-Q-73 ....
3-Q-73 .....
1-Q-74 .....
3-Q-73 ....
1-Q-74 ....
Ignition Wires
75.99
75.99
78.99
78.99
78.99
78.99
75.99
75.99
78.99
78.99
78.99
78.99
75.99
75.99
78.99
78.99
78.99
78.99
55.99
55.99
78.99
78.99
55.99
55.99
78.99
78.99
78.99
78.99
55.99
55.99
78.99
78.99
55.99
55.99
78.99
78.99
55.99
55.99
78.99
78.99
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
1982-89 Delco Spark Plug Wire Sets
QW806
1974-02 Spark Plug Wires
Spark plug wires are a major component in the vehicles
ignition system. Electrical failure can be greatly
hastened by loose connections at the ignition coil(s),
distributor, or spark plugs causing telltale corrosion at
connectors. Over time this loosening can develop from
quality variations in the wires themselves, or through
normal engine vibration. Other causes include retainer
failure, fluid leakage onto the wires causing the wires
to swell and soften, or even poor original routing (too
close to exhaust components or components with sharp
edges). When these conditions exist, and they may or
may not cause a noticeable misfire, the wires must be
replaced immediately, or they will wreak havoc on other
components such as ignition coils and nearby electronics,
or exhaust system components such as oxygen sensors
and catalytic converters. These replacement wires are
tailored to fit your specific application.
6 Cylinder
QW801 1975-76 250-D........................ 21.99 set
QW821 1977-79 231 ............................ 28.99 set
QW833 1980-81 231-A........................ 28.99 set
QW849 1982-84 2.8-1, L ..................... 29.99 set
QW868 1985-89 2.8-S ......................... 28.99 set
QW886 1989
3.8-7 (turbo) ............. 29.99 set
QW923 1990-92 3.1-T ......................... 26.99 set
QW795 1993-95 3.4-S ......................... 24.99 set
QW1123 1995-99 3.8-K......................... 24.99 set
QW1375 2000-02 3.8-K......................... 29.99 set
8 Cylinder
QW806 1974-76 all .............................. 34.99 set
QW806 1977
350-R ........................ 34.99 set
QW823 1977-78 305-U........................ 31.99 set
QW815 1977
350-R ........................ 34.99 set
QW806 1976-79 400-Z ........................ 34.99 set
QW815 1977-79 403-K........................ 34.99 set
QW843 1978
305-U........................ 34.99 set
QW823 1978-79 350-L ........................ 31.99 set
QW806 1977-79 301-Y........................ 34.99 set
QW823 1979
305-G........................ 31.99 set
QW859 1980-81 301-T (w/hi perf) ...... 34.99 set
QW806 1979-80 301-W ....................... 34.99 set
QW925 1980
305-H........................ 19.99 set
QW806 1981
265-S ........................ 34.99 set
QW859 1981
301-T, W................... 34.99 set
QW843 1982-86 5.0 ............................. 34.99 set
QW893 1985-86 5.0-F ......................... 37.99 set
QW892 1987-88 5.0 and 5.7 ................ 37.99 set
QW895 1989-92 all .............................. 34.99 set
QW986 1993
5.7 ............................. 52.99 set
QW1066 1994-95 5.7 ............................. 68.99 set
QW1117 1996-97 5.7 ............................. 69.99 set
QW1219 1998-02 5.7 ............................. 51.99 set
The replacement Delco spark plug wires are a service
replacement product and do not include the original
style lettering or date codes. Each spark plug wire will
replace your original to help keep your car running
smoothly.
D650 1982-83 2.5-F (LQ8), -2 (LL1) 36.99 set
D651 1984-86 2.5-2 (LQ9) ................ 33.99 set
D652 1982-84 2.8-1 (LC1) ................ 48.99 set
D653 1982
5.0-7 (LV5) ................ 49.99 set
D654 1982-86 5.0-H (LG4) ............... 47.99 set
D654 1983-86 5.0-G (L69) ................ 47.99 set
D655 1987
5.0-F, H (LG4) ........... 45.99 set
D655 1987
5.7-8 ........................... 45.99 set
D656 1985-89 2.8-S (LB8) ................ 39.99 set
Limitede
Lifetim y
Warrant
PX706101
Custom Fit for Your Application!
7.0mm to Fit Original Wiring Looms!
Plain Black Wires w/o Script for a Stock Look!
Hi-Temp Silicone Jackets!
Flame Thrower 7mm Spark Plug Wires
These Flame Thrower high performance spark plug
wires were created with the classic car in mind. They
are manufactured in original 7mm size jackets to fit
stock wiring looms. With no markings or script of any
kind on the wire, they maintain a stock appearance yet
give you all the benefits of a high performance wire
set including: 2 current paths-spiral wound stainless
steel alloy winding and carbon impregnated fiberglass
center core, low 500 ohm per foot resistance, silicone
jackets to resist high temperatures, moisture, oil
and chemicals. They also have EPDM rubber inner
insulation for superior heat resistance and prevention
of arcing and voltage leaks. Fiberglass reinforcing
braid is added for strength and flexibility. Lifetime
Warranty-Made in USA.
PX706101 1967-74 6 cyl. all................. 41.99 set
PX708102 1967-74 Pontiac V8............. 44.99 set
Ignition Wire Accessories
Valve Cover Spark Plug Wire Retainers
1968-81 Wiring Harness Brackets
These brackets attach to the valve cover bolts on the
front and rear of the engine on vehicles with factory
AC. Designed to secure the engine wiring harness to
keep the engine bay uncluttered.
A8700108 1968-81 ................................ 9.99 pr
Reproduced exactly as original. The V8 set includes 4
insulated metal retainers which attach to valve covers
using the lower valve cover bolts and also the hard
plastic separators for other locations between the spark
plugs and the distributor. The 400 CID set includes
the correct retainers which attach to the valve covers,
as well as the spark plug to distributor clips. Each set
includes the correct amount of retainers.
K0087 1967-74 400 CID ..................... 11.99 set
Spark Plug Wire Separator Set
This set of spark plug wire separators is made from
high grade plastic which helps insulate the plug
wires and reduce shorts and crosstalk. Includes two
4 wire separators, two 3 wire separators, and two 2
wire separators.
MN2417
V8....................................... 2.49 set
PY123
Spark Plug Wire Support and Separator Set
42570
These high grade chrome plated plastic support
brackets attach to the valve cover bolts or studs to
route the plug wires neatly from the distributor, over
the valve covers, and to the plugs. Keeps wires away
from hot underhood parts, insulates the plug wires,
and reduces shorts and crosstalk. Includes four chrome
support brackets, two 3 wire separators, and four 2
wire separators, as shown above.
MN2418
V8......................................... 4.99 set
Custom Plug Wire Loom Set
Get a clean custom look while protecting your ignition
wires from chafing or contact with exhaust headers.
Designed to fit on most V8 engines. Includes polished
billet aluminum wire looms, 8 feet of 1/2" stainless
conduit, 16 chrome wire terminator end caps, and 16
wire protection sleeves.
42570
ball milled wire loom set ........ 129.99 set
42569
flamed wire loom set .............. 129.99 set
42573
plain wire loom set ................. 129.99 set
T9097
Chrome Wire Looms
PY126
1967-79 Spark Plug Retainer Sets
Reproduction spark plug retainer sets for 1967-79
Firebird models. These quality reproductions will
have your engine ignition wires organized just like
they came from the factory. These are designed for
specific applications for correct wire routing.
PY123 1967
without AC .............. 29.99 set
PY123A 1967
with AC ................... 44.99 set
PY124 1968-69 without AC .............. 78.99 set
PY124A 1968-69 with AC ................... 78.99 set
PY470F 1970
all ............................. 69.99 set
PY126 1975-79 HEI .......................... 54.99 set
A970125C
Beautifully chromed, heavy gauge steel with easy snap
in grommets eliminates the need for removing wires
for quick installation.
T9097
Hi Lift, 4 hole (2) 5-1/4" .......... 5.99 pr
T4009
standard, 4 hole (2) 3-3/4" ....... 4.99 pr
Clamp Style Wire Separators
This metal strip runs across the left side valve cover
on 1967-68 models with AC. It is designed to secure
engine wiring when its metal tabs are folded over.
A8700107 1967-68 ................................ 14.99 ea
A8700110
1967-74 Spark Plug Wire Separators
These plastic spark plug wire separators keep the
wires organized and prevent cross talk between wires.
Available individually or as a 4 piece set with two 2
wire separators and two 4 wire separators.
Note: Not for HEI applications.
1979 Trans Am Valve Cover Wiring Clip
Keep your wiring secured to the valve covers with
this wiring backet/strap clip.
TA4033 1979 .......................................... 7.99 ea
A8700109
A8700110
A8700111
A8700112
A8700113
1967
1967
1967-74
1967-74
1971-74
4 wire VC mount ...
3 wire triangle .......
2 wire ....................
4 wire ....................
4 piece set..............
2.99
2.99
1.49
.99
5.99
ea
ea
ea
ea
set
Organize your engine bay with Taylor clamp style wire
separators manufactured from nonconductive type
6/6 nylon that won't melt, distort, fade or crack. Sets
includes two 4 wire separators, two 3 wire separators,
and two 2 wire separators. Available in four different
colors. Stainless steel hardware included.
7-8.2mm Wire Separators
A970125C chrome................................ 7.99 set
A970125K black ................................... 11.99 set
A970125R red ...................................... 11.99 set
A970125B blue..................................... 11.99 set
10.4mm Wire Separators
A970126K black ................................... 13.99 set
A970126R red ...................................... 13.99 set
A970126B blue..................................... 13.99 set
Ignition Wire Accessories
471
A970126R
1967-68 Wire Loom Holder
Spark Plug Accessories
Spark Plug Wire Puller
1967-02 E3® Spark Plugs
8199
1967-92 Accel Spark Plugs!
Accel’s patented race proven spark plugs are now
available in a “shorty” configuration. The overall
length of each plug has been reduced 1/4” to 3/8”
(depending on the specific spark plug) to gain critical
air gap space between the spark plug boot and the
exhaust manifold or header tube. This helps eliminate
burning the spark plug boot or dimpling the header
tube. The shorter spark plug length also can make it
easier to install and remove the spark plugs in certain
applications where there is not a lot of room to work
with a socket or wrench. Set of 8.
Note: *Sold in sets of four. Two sets requires for 8 cylinder
applications.
K
Pontiac 8 Cylinder
8197
1967
326 ...........................
8197
1968-70 350 2bbl ...................
8197
1968-70 400 RA ....................
8197
1970
400 exc RA ..............
8199
1972-76 400 4bbl ...................
8199
1972-76 455 ...........................
8199
1975-76 350 4bbl ...................
8199
1977
350 (P) .....................
8199
1977-79 350 (L) .....................
8199
1977-79 400 (Z) .....................
8199
1978-79 301 4bbl (W) ...........
8199
1979-80 350 (X) ....................
8199
1980-81 265 (S) .....................
8199
1980-81 301 (T, W) ...............
8199
1981
267 (J)......................
Chevrolet 8 Cylinder
8199
1977-81 305 (7, G, H, S) .......
8198
1985
305 TPI (F) ..............
8198
1986
305 (G) ....................
8199
1986
305 (H) ....................
8198
1986-87 305 TPI (F) ..............
8198
1986-87 350 iron heads (8)....
04164S* 1986-87 350 alum heads (8) ..
8199
1988-92 305 (E, F) ................
8199
1988-92 350 (8) .....................
This handy tool is great for pulling spark plug wires
quickly and easily without damage to the wire or the
rubber boots.
Y51500
................................................ 4.99 ea
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
34.99
set
set
set
set
set
set
set
set
set
Want to unlock more power from your engine and
actually burn less gas? Through an intensive R&D
process, E3 has created a spectacular new spark plug
that creates the industry’s fastest spark growth and
fastest combustion pressure rise, meaning it burns fuel
more efficiently to give you more power and increased
fuel economy. E3’s patented design forces the spark
discharge from one sharpened edge to another, and
projects the spark forward into the combustion chamber,
unlike traditional spark plugs, for the most consistent,
powerful and efficient burn possible! Sold individually.
Pontiac 6 cylinder
E3346
1967
230 I6 ...................... 5.99 ea
E3346
1968-69 250 I6 ...................... 5.99 ea
E3342
1970-71 250 I6 ...................... 5.99 ea
E3341
1972-75 250 I6 ...................... 5.99 ea
E3342
1976
250 I6 ...................... 5.99 ea
E3342
1977-79 231 V6 ..................... 5.99 ea
Pontiac 8 Cylinder
E3352
1967
326 ........................... 5.99 ea
E3352
1968-70 350 ........................... 5.99 ea
E3352
1968-71 400 ........................... 5.99 ea
E3352
1971
350 2bbl ................... 5.99 ea
E3342
1971
350 4bbl ................... 5.99 ea
E3352
1971
455 ........................... 5.99 ea
E3342
1972-76 455 ........................... 5.99 ea
E3342
1972-79 350 ........................... 5.99 ea
E3342
1972-79 400 ........................... 5.99 ea
E3352
1977-79 403 Olds .................. 5.99 ea
E3342
1977-81 301 ........................... 5.99 ea
E3341
1982-89 2.8L V6 .................... 5.99 ea
E3341
1990-92 3.1L V6 .................... 5.99 ea
E3342
1993-95 3.4L V6 .................... 5.99 ea
E3344
1995-02 3.8L V6 .................... 5.99 ea
E3342
1977-84 305 ........................... 5.99 ea
E3341
1985
5.0L FI ..................... 5.99 ea
E3342
1985
5.0L carb.................. 5.99 ea
E3341
1986
5.0L.......................... 5.99 ea
E3341
1987
5.7L iron heads ........ 5.99 ea
E3348
1987
5.7L alum heads ...... 5.99 ea
E3342
1987-92 5.0L.......................... 5.99 ea
E3342
1988-92 5.7L.......................... 5.99 ea
E3362
1993
5.7L.......................... 5.99 ea
E3344
1994-97 5.7L.......................... 5.99 ea
E3354
1998-02 5.7L.......................... 5.99 ea
472
X2757
Calibrated Ignition Testers
Accurately check for spark in ignition systems without
removing the spark plugs from the engine. Testers
verify that energy from the spark plugs are efficient
to fire. Attach the spark plug wire to tester end, clamp
tester to engine as ground, then crank the engine and
test for spark. It’s easy and fast!
X2756 HEI ignition tester .................... 9.99 ea
X2757 standard ignition tester ............. 9.99 ea
Spark Plug Wire Puller
Removes spark plug wire boots from plugs with
minimal effort. Designed for use on most cars and
trucks.
Y51250 .................................................. 9.99 ea
Spark Plug Wire Tester
When you want to quickly locate faulty plug wires,
you need this tester. Now you can check spark plug
wires without piercing or ruining the wires. If the
light flashes, you have a sound and intact wire. If not
it's time to replace.
Y26900
................................................ 11.99 ea
Cool-It Plug Wire Sleeves
This unique spark plug and ignition wire protector
comes in four colors; red, blue, black and silver. These
dual-purpose sleeves enhance performance, reduce
misfires, extend plug wire life and will not react with
petroleum products. The double-wall construction
keeps the wire and boot cooler in a high-temperature
engine. Its universal size fits most boots, is easy to
install and - most importantly-is nonflammable. CoolIt Plug Wire Sleeves can be used in any temperature
environment from street vehicles to race cars.
4-Pack
TT14262 black ...................................... 39.99 set
TT14261 red ......................................... 39.99 set
TT14263 blue........................................ 31.99 set
TT14260 silver...................................... 39.99 set
X2756
Spark Plug Gappers
Gauges and gaps all types of spark plugs from 0.20"
to .100" (.50mm to 2.53mm) Includes tapered edge
for gauging spark plugs. Specially designed hole with
flange adjusts side wire of plug without pressuring
center electrode.
Y67870
................................................ 4.99 ea
Spark Plug Accessories
Spark Plug Terminal Pliers
Safely removes spark plug cables. Prevents damage
to cables when replacing. The handles and jaws are
coated with heavy plastic for a sure grip.
X135
................................................... 9.99 ea
Ignition Components
10012
Spark Plug Index Washers
These soft copper washers help increase horsepower
and reducing detonation. They allow the spark plugs
ground and electrode opening to be indexed in their
optimal position for better combustion and reduced hot
spots on the electrode. Available for both tapered and
flat sealed 14mm spark plugs in packages of 30. Each
set includes 10 washers in three different thicknesses.
10012
tapered indexing set ................. 29.99 set
10022
flat indexing set ........................ 29.99 set
Brass Non-Magnetic Feeler Gauges
Includes 6 brass blades, 0.006" to 0.016". This
nonmagnetic feeler gauge is designed to measure
the clearance on electronic ignition systems where
a nonmagnetic gauge is required. 1/2"W x 3-5/16"L.
X2223
................................................... 3.99 ea
1967-74 Chrome Ignition Coil
Replacement chrome ignition coil is just what
you’ll need to keep your electrical system operating
efficiently. This is a 60,000 volt coil.
T9324
1967-74 .................................... 64.99 ea
E276
1967-81 Coil Holder Bracket
Spark Plug Indexing Tool
This tool makes indexing spark plugs easier. Made
from gold anodized billet aluminum, it accepts both
tapered and flat sealed 14mm spark plugs. The tool
has knurled edges for hand held use or it can be locked
into a vice on its flat edges. Simply mark your desired
ground electrode position and place index washers on
the spark plug until the electrode lines up to the mark.
10052
indexing tool ............................ 22.99 ea
Spark Plug Gapper & Feeler Gauge Set
All-in-one tool comes with 6 spark plug gap wires, an
electrode bending tool, and 12 steel blades. Precision
wires and blades can measure both spark plug and
ignition system settings. Blades are approximately
1/2" wide by 3 1/2" long. Includes .025", .030", 034",
035", 040" and .045" gap wires, and 010", .012",
.015", .016", .017", .018", .019", .020", 022", 024",
025" and .026" blades.
Y67850 ................................................... 8.99 set
Chrome Coil Cover
Spark Plug Hole Thread Chaser
Deluxe Feeler Gauges
Feeler gauge set consists of 31 blades, including a
brass 0.010 blade for use on electronic ignitions.
Precision blades ensures accurate measurement. Blades
from 0.0015" to 0.035" (0.038mm to 0.889mm) are
approximately 1/2"W x 3-1/2"L.
Y68100 ................................................... 8.99 set
PR-i Points Replacement Ignition System
This points replacement ignition system offers easy
installation because you do not have to pull the
distributor out of the engine to install. Eliminates breaker
points maintenance, “points bounce” at high RPM and
electronic dwell control for maximum ignition energy
at high RPM with reduced current draw at low RPM.
Mounts in the exact place of your ignition points in
the distributor. The Hall effect sensor detects points
cam lobes and provides stable timing. No shutter or
magnetic wheel required. Features a two wire hookup
to the coil and includes a precise digitally set RPM
limiter (200 RPM steps from 5,200 to 7000 RPM) which
you can set by using a flat blade screwdriver! The unit
has encapsulated construction using surface mount
electronics; waterproof and highly resistant to vibration
and shock. Includes instructions and troubleshooting
guide. Compatible with most original equipment ignition
coils and is 50-state street legal. Made in the USA.
Pontiac V8 Engines
577410 1956-74 single points ........... 118.99 ea
Dress your engine with this all chrome coil cover. Fits
most early model coils. Includes cover and attaching
bracket. For use with small block engines.
66120
small block ............................ 5.99 ea
AR43232
Coil Bracket Bolt
Add a touch of class to your coil bracket installation
with an ARP bolt. Available in black oxide finished
chrome moly or rust-proof stainless steel, as well as
with a conventional hex head or compact 12-point
(great for use with those coils mounted in tight, hardto-reach places). Washers included.
AR13232 black oxide hex head .......... 4.99 ea
AR13231 black oxide 12-point ........... 4.99 ea
AR43232 stainless
hex head .......... 7.99 ea
AR43231 stainless
12-point ........... 6.99 ea
Ignition Components
473
Cleans and threads directly in the spark plug hole!
Double ended for both 14mm and 18mm threads. Use
with 13/16" spark plug socket.
Y20200
............................................... 7.99 ea
This coil holder bracket is available designed to fit
1967-81 models without HEI. Available zinc plated,
stainless steel, chrome or cadmium plated. Cinch
bolt included.
E276
1967-81 zinc plated.............. 14.99 ea
T9366
1967-81 chrome ................... 4.99 ea
F253
1968-71 V8, cad plated ........ 44.99 ea
Tune-Up Components
Gold Features Include:
Solid brass
rotor blades
with coating to
reduce radio
interference
Glass reinforced
molding
compound for
outstanding
dielectric strength
Solid brass or
copper inserts
for longer life
DR2015G
1985-95 Professional Gold Distributor Caps & Rotor Sets
Professional Gold Quality Ignition components for late model features solid brass
or copper inserts for longer life and maximum resistance to corrosion and electrical
pitting, high mineral content and glass reinforced molding compound for outstanding
dielectric strength, and a solid brass rotor blades with coating to reduce radio interference.
DR2012G 1985-95 6 cylinder ......................................................... 19.99 set
DR2009G 1985-86 8 cylinder ......................................................... 34.99 set
DR2015G 1987-92 8 cylinder ......................................................... 29.99 set
DR2001G
DR2004G
These OE Quality Ignition Components for Breaker
Point Ignition Systems Meet or Exceed OEM Specs.
1967-86 Professional Gold Cap & Rotor Sets
Professional Gold Quality Ignition Components features solid brass or copper inserts
for longer life and maximum resistance to corrosion and electrical pitting, high mineral
content and glass reinforced molding compound for outstanding dielectric strength
and a solid brass rotor blades with coating to reduce radio interference.
Breaker-Points Ignition System
DR2028G 1967-73 8 cylinder ......................................................... 19.99 set
HEI Systems
DR2004G 1978-86 6 cylinder w/HEI ............................................. 42.99 set
DR2001G 1974-86 8 cylinder w/HEI ............................................. 36.99 set
Q1002
1967-74 OE Quality Tune Up Components
K
DR2004
DR2012
1974-92 OE Quality Cap & Rotor Sets
Demand the best quality ignition components for your cherished vehicle and nothing
less! Some competitor’s caps & rotors are made of materials that do not even meet
OE specifications. Some competitor’s caps are made of PP (polypropylene) which
has a much lower melting point (350°F) than the material in which our caps are
made from and some are even made from incorrect molds. Because of this, the
competitor’s caps can have a slightly smaller inside diameter, creating potential fit
problems as well potential melting/warpage problems. Our caps exceed the OEM
specifications and are made from a blend of PBT (polybutylene terephthalate) and
PET (polyethylene terephthalate). This material has a higher melting point (500°
F) and also provides increased stiffness and resistance to warpage.
OE Quality Cap & Rotor Sets-HEI System
DR2003 1975-77
6 cylinder w/HEI ............................................. 24.99 set
DR2004 1978-86
DR2008 1982-84
DR2001 1974-86
OE Quality Cap & Rotor Sets-Late style
DR2012 1985-92
6 cylinder ......................................................... 16.99 set
DR2009 1985-86
8 cylinder ......................................................... 24.99 set
DR2015 1987-92
8 cylinder ......................................................... 29.99 set
474
Tune-Up Components
You can’t tell much about a distributor cap or rotor by just looking at it, because
most of them look pretty much the same on the outside. Even so, there can be
significant differences in the materials used in the manufacture of distributor caps
that affect the product’s performance on a vehicle. One competitor’s cap is made of
materials that do not even meet OE specifications. The competitor’s cap is made of
PP (polypropylene) which has a much lower melting point (350°F) than the material
in which our caps are made from and they are made from incorrect molds. Because
of this, the competitor’s cap had a slightly smaller inside diameter, creating potential
fit problems as well potential melting/warpage problems. Our caps exceed the OEM
specifications and are made from a blend of PBT (polybutylene terephthalate) and
PET (polyethylene terephthalate). This material has a higher melting point (500
degrees F) and also provides increased stiffness and resistance to warpage. You’ll
find that the same strict quality standards that make are Distributor caps the finest
in the industry apply to our point sets and condensers.
OE Quality Cap & Rotor Sets
DR2027
1967-74 6 cylinder ......................................................... 12.99 set
DR2028
1967-73 8 cylinder ......................................................... 19.99 set
OE Quality Point Sets
DR1077
1967-74 6 cylinder ......................................................... 9.99 set
DR1075
1967-73 8 cyl ................................................................. 9.99 set
DR1080
1967-74 8 cyl (uni-set) ................................................... 9.99 set
OE Quality Condensers
U1515
1967-74 6 cylinder ......................................................... 3.99 ea
U1511
1967-73 8 cylinder ......................................................... 4.99 ea
Buy The Complete Kit and SAVE!
Why replace just one component when you can buy peace of mind AND save money
at the same time! Our kits come complete with OE quality distributor cap & rotor,
OE quality points and OE quality condenser.
Buy The 6 Cylinder Kit and SAVE!
Q1001
1967-74 6 cylinder ......................................................... 24.99 kit
Buy The 8 Cylinder Kit and SAVE!
Q1002
1967-73 8 cyl ................................................................ 31.99 kit
Tune-Up Components
C834
G7240
R303
C819
1967-86 GM Tune Up Parts
Original AC Delco tune up parts for a variety of applications. These are genuine GM
service replacement parts which may differ cosmetically from the originally installed part.
Tune Up Kit - Points, Condenser, Rotor Cap
R303
1967-74 8 cylinder ......................................................... 35.99 kit
Distributor Caps
G7240
1967-74 8 cylinder ......................................................... 13.99 ea
G7241
1974-86 8 cylinder, HEI................................................. 13.99 ea
G7242
1985-86 5.0 w/AT .......................................................... 17.99 ea
Rotor Caps
G6010
1967-74 8 cylinder ......................................................... 4.99 ea
Points
D1060
1967-73 8 cylinder ......................................................... 22.99 ea
Condensers
G6043
1967-73 8 cylinder ......................................................... 6.99 ea
DR100
C1098
C846
DR124
C849
C1144
1967-02 Replacement Ignition Coils
DR140
DR178
1974-97 Control Modules for Electronic Ignition Vehicles.
Note: Because of the many applications of control modules, use the photo to identify the module,
or if you cannot identify by photo, call for more detailed application listings.
19.99
19.99
29.99
29.99
29.99
29.99
39.99
39.99
99.99
89.99
74.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
1967-74 Distributor Point
If you own a 6 cylinder Pontiac you may
want to replace your original points with
an authentic AC Delco points package.
We offer these OEM points for your 6
cylinder Pontiac engine.
G9138 1967-74 6 cyl....... 9.99 ea
1974-80 Control Module
This is an original AC Delco distributor
control module for the years and models
listed below.
G9137 1974-80 export .... 40.99 ea
Want Professional Quality? Go For The GOLD!
Classic Industries® is proud to offer this World-Class
PREMIUM line of ignition components. World-Class
manufacturing Technology, high performance design and
premium quality compounds make these ignition components
the ULTIMATE choice for longer life and trouble free service.
When you want ignition components that are one step above
OE quality, go for the GOLD!
• Oil-Filled Coils
• Increased number of wire windings for greater
output voltage
• Heavy duty insulator for longer life
• Double outer laminations create a stronger magnetic
field for higher output voltage and spark energy
C819G
1967-74 Premium Performance Gold Quality Coil
C819G
C819G
1967-74
1967-74
6 cylinder ......................................................... 29.99 ea
8 cylinder ......................................................... 29.99 ea
Tune-Up Components
475
OE Quality Control Modules
DR100
1974-80
8 cylinder .........................................................
DR100
1975-80
6 cylinder .........................................................
DR124
1980-81
6 cylinder .........................................................
DR124
1981-86
8 cylinder .........................................................
DR126
1982
4 cylinder .........................................................
DR126
1982-84
6 cylinder .........................................................
DR140
1985-92
6 cylinder .........................................................
DR140
1987-92
8 cylinder .........................................................
DR196
1993
8 cylinder .........................................................
DR174
1994-95
8 cylinder .........................................................
DR178
1996-97
8 cylinder .........................................................
OE quality coils featuring the same strict quality standards as our other ignition/
engine management components.
OE Quality Coil-Breaker Point Ignition System
C819
1967-74
6 cylinder ......................................................... 24.99 ea
C819
1967-74
8 cylinder ......................................................... 24.99 ea
OE Quality Coil-HEI System
C833
1974-86
w/red, white, blk wires .................................... 19.99 ea
C834
1977-86
w/red, yellow, blk wires..................................... 24.99 ea
OE Quality Coil-Late Style
C846
1985-92
6 cylinder ......................................................... 19.99 ea
C846
1987-95
8 cylinder ......................................................... 19.99 ea
C849
1993-02
6 cylinder (3 required) ..................................... 24.99 ea
C1098
1996-97
8 cylinder ......................................................... 34.99 ea
C1144
1998-02
8 cylinder (1 per cylinder) ............................... 57.99 ea
NEVER CHANGE
POINTS AGAIN!
Ignitor shown
here installed
Pertronix
30 Month
Limited
Warranty
Eliminates points and moving parts that wear out,
while delivering twice the voltage to the spark plugs
over stock to increase horsepower, fuel economy
and plug life! Optimal performance can be achieved
when used with the Flame Thrower 40,000 volt coil.
Ignitor is concealed entirely within the distributor so
you have no unsightly black box to clutter up your
engine compartment. Easily installs in minutes with no
complex wiring, is compatible with 12-volt negative
ground systems, and it’s smog legal in all 50 states and
Canada! Comes with a 30-month warranty.
6 Cylinder
PX1162A
1967-74 6 cyl ................... 81.99 set
8 Cylinder with Point-Lobe Style Sensor
PX1181LSC 1967-74 8 cyl ................... 81.99 set
8 Cylinder with Hall-Effect Style Sensor
PX1181
1967-74 8 cyl ................... 79.99 set
PX3002
PX3000
PX60130
Flame Thrower 50,000 Volt HEI Coils
Flame Thrower HV 60,000 Volt Coils
Pertronix Flame Thrower 50,000 volt E-Core coils
feature an optimized winding design to maximize spark
gap current and available voltage. When teamed with
the Flame Thrower module they produce 100% more
energy across the spark plug gap compared to the OEM
coil. Select the matching Flame Thrower module for
your application to create a proven performance combo!
The Flame Thrower HV (high voltage) coils have
an E-Core design which is rated at a sizzling 60,000
volts and operates with no degradation of energy
throughout the temperature ranges. Made from 6063
T5 aluminum, it efficiently transfers heat to optimize
energy output, and the housing is black anodized
for increased corrosion resistance. Available in 3
different resistances for compatibility with most points
and electronic ignition systems. Standard threaded
connections and mounting hardware are included.
PX60104 0.45 ohm ............................... 69.99 ea
PX60115 1.5 ohm ................................. 69.99 ea
PX60130 3.0 ohm ................................. 69.99 ea
Note: Replaces OEM coils with the same color wires listed.
HEI In-Cap Mounted Coil
PX3000 black/yellow/red wire ............... 44.99 ea
PX3001 black/white/red wire ................. 49.99 ea
HEI Remote Mounted Coil
PX3002 1985-95 .................................... 44.99 ea
Flame Thrower HC 60,000 Volt Coil
K
The Ignitor II electronic ignition goes an extra step
beyond for even more power and efficiency! It senses
levels of current in the coil, and uses a powerful micro
controller to adjust the dwell to maintain peak energy
throughout the entire RPM range. As engine RPM and
operating conditions change, dwell time is increased
or decreased to provide more energy at higher RPM,
reducing misfires while improving engine performance.
Ignitor II develops nearly 4 times more available energy
between 3000 and 5000 RPM, and double the available
plug voltage! The Ignitor II’s higher RPM performance
is maximized when used with the new Flame-Thrower
II super low resistance (0.6 ohms) 45,000 volt coil,
but the system is compatible with any induction coil.
It comes with a 30-month warranty and is emissions
legal in all 50 states and Canada!
6 Cylinder
PX91162 1967-74 6 cyl ........................ 114.99 set
8 Cylinder with Hall-Effect Style Sensor
PX91181 1967-74 8 cyl ........................ 114.99 set
Ignition box performance without the box. The Ignitor
III is the most advanced points replacement set. It
is literally an ignition box inside your distributor. It
features multiple sparks throughout the entire RPM
range and a REV limiter accurate to +/- 50 RPM
which is set by you with an LED user feedback for rev
limit confirmation. The Ignitor III module generates 5
times more spark than points. This means more spark
energy creating more horsepower and better mileage.
The Ignitor III features include: adaptive dwell which
maintains peak energy throughout the entire RPM
range, reducing misfires while improving engine
performance. Peak current level is reached just prior to
spark for maximum energy without the heat build-up,
increasing coil performance and module reliability.
Legal in all 50 states and Canada. Fits GM V8 single
point type distributors.
Note: Not available for 6 cylinder.
PX71181
476
1967-74 ............................... 131.99 ea
PX40001
PX45011
PX44001
Flame Thrower Performance Coils
Complete your ignition upgrade with a Flame Thrower
high performance coil. Best when used with the Ignitor
Electronic Ignition Conversion, the Flame Thrower
Hi Performance Coil fits existing coil brackets for
a clean, factory look. Enables larger plug gaps for
greater fuel efficiency & more power. Available with
either a chrome or black finish. Choose from a variety
of voltages and primary resistance ratings.
40,000 Volt Coil - 1.5 & 3.0 ohm
These Flame Thrower coils are compatible with breaker
point ignition systems or vehicles equipped with the
original Ignitor system. Choice of 6 cyl or 8 cyl.
Chrome Oil Filled
PX40501 6 cyl 3.0 ohm .................... 35.99 ea
PX40001 8 cyl 1.5 ohm .................... 39.99 ea
Black Oil Filled
PX40511 6 cyl 3.0 ohm .................... 34.99 ea
PX40011 8 cyl 1.5 ohm .................... 34.99 ea
Black Epoxy Filled
PX40611 6 cyl 3.0 ohm .................... 41.99 ea
PX40111 8 cyl 1.5 ohm .................... 41.99 ea
45,000 Volt Coil - 0.6 ohm
The Flame Thrower II coils are for use on vehicles
equipped with the Ignitor II system.
Chrome Oil Filled
PX45001 4, 6 or 8 cyl ............................ 49.99 ea
Black Oil Filled
PX45011 4, 6 or 8 cyl ............................ 36.99 ea
Black Epoxy Filled
PX45111 4, 6 or 8 cyl ............................ 45.99 ea
45,000 Volt Coil - 0.32 ohm
The Flame Thrower III coils are for use on vehicles
equipped with the Ignitor III system.
Chrome Oil Filled
PX44001 8 cyl....................................... 44.99 ea
Black Oil Filled
PX44011 8 cyl....................................... 39.99 ea
The Flame Thrower HC (high current) coils have an
E-Core design which is rated at 60,000 volts with
an ultra low .32 primary resistance and has a High
Current design for a rapid charge rate. Made from
6063 T5 aluminum, it efficiently transfers heat to
optimize energy output. The housing is black anodized
for increased corrosion resistance and has a precision
machined male high tension terminal and brass primary
terminals. It is compatible with Ignitor II and Ignitor
III systems as well as most capacitive discharge
boxes. Standard threaded connections and mounting
hardware are included.
PX60103 0.32 ohm ............................... 69.99 ea
PX2000
PX20011
66944C
PX20021
Performance Ignition Modules
These performance ignition modules are direct
replacements for GM computer controlled distributors.
These modules provide enhanced high RPM
performance and increase spark plug voltage when
used with a corresponding Flame Thrower coil.
Pertronix Flame Thrower Modules
PX2000 1974-81 4 pin, 6.9 amp......... 49.99 ea
PX20011 1981-87 7 pin, 6.0 amp......... 54.99 ea
PX20021 1987-92 8 pin, 6.0 amp......... 51.99 ea
Proform Modules
66944C 1974-81 4 pin ....................... 19.99 ea
PX9010
Vacuum Advance Lockout
This vacuum advance lockout mounts to the distributor
and is used when switching from a vacuum advance
to a mechanical advance.
PX9010 clockwise dist ............................ 4.99 ea
PX9011 counterclockwise dist ................ 4.99 ea
HEI Wire
Harness and Capacitor
............................................... 19.99 ea
66946C
PX100700
PX100711
Flame Thrower Plug N Play Billet Distributor
HEI Adjustable Vacuum Advance
This adjustable vacuum advance canister allows you to
optimize ignition advance for maximum part-throttle
performance and cruise-speed efficiency.
66952C
............................................... 15.99 ea
66942B
66947RC
HEI High-Power Distributor Coil Set
Get this 50,000 volt high-power distributor set in your
choice of colored caps.
Complete Set
66942B
with blue cap ................... 49.99 set
66942BK
with black cap ................. 49.99 set
66942R
with red cap ..................... 49.99 set
Cap and Rotor Set
66947BC
blue .................................. 24.99 set
66947BKC
black ................................ 24.99 set
66947RC
red .................................... 24.99 set
Performance Advance Curve Set
Ignition File
This Performance Advance Curve Set features
precision machined chromoly weights and center plate
to eliminate erratic timing. Three sets of springs, guide
bushings, and complete installation instructions make
recurving your HEI distributor easy.
66948C
............................................... 5.99 ea
Files ignition points and other small objects. Thin
blade with fine grid on both sides is ideal for removing
carbon from points.
X2153
.................................................. 2.99 ea
Plug ‘n play billet distributors are designed for maximum
ignition performance and easy installation, all at a price
that you can afford. Replace your outdated points or
electronic distributor with this performance proven
distributor. These vacuum advance standard deck height
distributors feature the patented Ignitor II electronics
and a CNC machined 6061 T-6 billet housing. Fits
Chevrolet small block engines.
Black Cap
PX100700 female terminals ................ 239.99 ea
PX100710 male terminals ................... 244.99 ea
Red Cap
PX100701 female terminals ................ 239.99 ea
PX100711 male terminals ................... 244.99 ea
PX300810
PX300811
Magnetic Trigger Billet Distributor
These magnetic triggering billet distributors for SB
Chevy engines contain a precision magnetic pick up coil
and reluctor that produce a strong crisp signal even at
extremely low RPM. The over molded pick up coil has
excellent corrosion resistance and a standard tyco mate
plug for easy wiring. This distributor is compatible with
most capacitive discharge and magnetically triggered
ignition systems. Distributors have a mechanical
centrifugal advance. Available with black or red caps.
At last...
a coil and
module
engineered
to work
together!
Note: Must be used with an ignition box. Not legal for use
on pollution controlled vehicles.
Machined or
Cast Finish!
red
PX300810
PX300811
black cap .......................... 204.99 ea
red cap ............................. 204.99 ea
blue
HEI Electronic Distributor Tune-Up Set
These Performance Tune-Up Sets have everything
needed to perk up the performance of your stock
Chevrolet HEI distributor. These sets include a street/
strip 4-pin module and coil combination, premium
rotor and cap, coil cover, adjustable vacuum advance
canister, high performance advance kit, wire harness
with capacitor, and complete installation hardware.
Note: For use on Chevrolet V8 with a red/yellow coil wire.
Pertronix Flame Thrower Set
PX8000
black cap ............................
PX8001
red cap ...............................
PX8002
blue cap..............................
Proform Set
66945BKC black cap ............................
66945RC
red cap ...............................
66945BC
blue cap..............................
119.99 set
119.99 set
119.99 set
84.99 set
84.99 set
84.99 set
12 Month
Limited Warranty
black
Flame Thrower HEI Distributor
Experts agree that good HEI systems rely on a
good module and a good coil. We believe that the
combination of a great module and a great coil makes
the Flame Thrower distributor the best! Operates
without misfires beyond 7500 rpm.... that’s 3000 rpm
higher than most enthusiasts report with their stock
HEI. Produces 67% more energy in the coil, delivers
twice the energy across the spark gap allowing wider
plug gaps (.050-.055).
Note: Please specify red, blue or black cap when ordering.
Chevrolet Engines
PX101 machined distributor ................. 244.99 ea
PX102 cast distributor .......................... 224.99 ea
Pontiac Engines
PX103 cast distributor .......................... 241.99 ea
D105810
Flame Thrower Billet Slip-Collar Distributor
These Flame Thrower billet slip-collar distributors are
designed to give maximum ignition performance and
easy installation. Designed for small block Chevrolet
engines, these distributors provide all the features
and benefits that the complete line of Flame Thrower
distributors offer. The slip-collar design fits either
standard deck or tall deck applications.
D105810
black cap .......................... 291.99 ea
D105811
red cap ............................. 291.99 ea
477
PX8001
Distributors Components
D1692
D1895
Pontiac HEI Distributor
D1893
D1865
1967-97 Remanufactured Distributors
This HEI distributor offers calibrated advance curves
that are optimized for maximum combustion efficiency
and for the elimination of detonation damage and throttle
ping. Assembled from precision-made parts for advance
curve smoothness. Offers longer term durability and a
higher voltage spark that permits a bigger spark plug gap,
resulting in more power and reduced plug fouling. Each
unit includes a high-power coil, a premium dielectric
red cap with brass terminals and a rotor cap.
66953
................................................. 194.99 ea
Classic Industries® offers a full line of distributors
for your Firebird. If your Firebird is having problems
starting, has a rough idle or the performance is not
what it use to be, it could be time to change your
distributor. Each distributor is remanufactured and
tested to guarantee you get the best quality distributor
your money can buy.
66941BC
66941BKC
Chevy V8 HEI Electronic Distributor
Aftermarket distributors in your choice of any high
performance color. Each distributor includes a coil and
colored cap. For use with H.E.I. V8 engines.
66941BC
polished, blue cap .............. 129.99 ea
66941BKC polished, black cap ............ 129.99 ea
66941RC
polished, red cap ................ 129.99 ea
66941BKUC unpolished, black cap ........ 129.99 ea
66941TUC unpolished, tan cap ............ 129.99 ea
K
Note: Distributor cap and rotor not included.
6 Cylinder Engines
D1621 1967
230 w/sngl vac............. 49.99 ea
D1621 1968-69 250 w/sngl vac............. 49.99 ea
D1612 1970
250 .............................. 44.99 ea
D1637 1971-74 250 .............................. 59.99 ea
D1692 1975-76 250 ............................... 121.99 ea
D1693 1977
231 w/“Odd-Fire” dist. 129.99 ea
D1694 1977
231 w/even fire dist. .... 119.99 ea
D1694 1978-81 231 w/sngl vac............. 119.99 ea
D1671 1980-81 231 w/o vac ................. 119.99 ea
D1631 1982-84 2.8 exc. Canada ........... 99.99 ea
D1630 1982-84 2.8 Canada ................... 129.99 ea
D1631 1985-86 2.8 w/carb. (VIN X) .... 99.99 ea
D1633 1985-86 2.8 w/EFI (VIN,S,W,9) 129.99 ea
D1633 1987-89 2.8 ............................... 129.99 ea
D1633 1990-92 3.1 ............................... 129.99 ea
8 Cylinder Engines
D1851 1967
326, 400 w/sngl vac..... 69.99 ea
D1851 1968-74 350, 400 w/sngl vac..... 69.99 ea
D1851 1971
455 w/sngl vac............. 69.99 ea
D1861 1972-74 400, 455 w/unitiz ign... 109.99 ea
D1890 1974
400, 455 w/HEI ign ..... 129.99 ea
D1890 1975-76 all ................................. 129.99 ea
D1890 1977
301, 305 ...................... 129.99 ea
D1895 1977-78 350 VIN L (chev) ........ 125.99 ea
D1893 1977-78 350 VIN R (olds.) ........ 104.99 ea
D1890 1977
350 VIN P (pont.) ........ 129.99 ea
D1890 1977-79 400 .............................. 129.99 ea
D1893 1977-79 403 .............................. 104.99 ea
D1895 1978-79 305 .............................. 125.99 ea
D1896 1978
350 VIN X (Buick)...... 129.99 ea
D1890 1979-80 301 .............................. 129.99 ea
D1890 1980
265 .............................. 129.99 ea
D1874 1980
301 w/high perf.(W72) 149.99 ea
D1865 1980-81 305 w/o vac ................. 119.99 ea
D1895 1980-81 305 w/vac .................... 125.99 ea
D1871 1981
265, 301 ...................... 109.99 ea
D1865 1982-84 5.0 w/o vac .................. 119.99 ea
D1895 1982-84 5.0 w/vac ..................... 125.99 ea
D1867 1985-86 5.0 VIN code F ............ 139.99 ea
D1865 1985-86 5.0 VIN G, H exc. Can 119.99 ea
D1895 1985-86 5.0 VIN H Can ............ 125.99 ea
D1830 1987
5.0 VIN F, H exc. Can . 125.99 ea
D1895 1987
5.0 VIN code H Can .... 125.99 ea
D1830 1987-92 5.7 ............................... 125.99 ea
D1830 1988-92 5.0 ............................... 125.99 ea
D1832 1993-94 5.7 ............................... 219.99 ea
D1803 1995
5.7 ............................... 199.99 ea
D1833 1996-97 5.7 ............................... 249.99 ea
478
66938RC
66939BKC
ND1005
Chevy V8 Late Model Electronic Distributor
If your 1987 and later computer controlled Chevy
engine is having problems starting, has a rough idle
or the performance is not what it use to be, it could
be time to change your distributor. This aftermarket
distributor manufactured by Proform® is an all new
late model distributor.
66938RC
polished (red cap) ............... 184.99 ea
66939BKC unpolished (black cap) ........ 149.99 ea
G6000
ND1008
1977-97 New Distributors
Get consistent spark for maximum efficiency, accurate
timing, and peak performance at all RPM ranges!
Made from 100% new parts that meet and exceed OE
specifications, each distributor and it's components
have been tested assuring quality and endurance that
can be trusted. All distributors come complete with
an OE quality distributor cap and rotor. For use in
Chevrolet V8 engines.
ND1008 1977-78 5.7L HEI w/vac. adv. 89.99 ea
ND1008 1978-86 5.0L HEI w/vac. adv. 89.99 ea
ND1004 1987-92 5.0L & 5.7L .............. 74.99 ea
ND1022 1993-94 5.7L w/vented cap .... 127.99 ea
ND1005 1995-97 5.7L .......................... 114.99 ea
66940C
Chevy V8 HEI Electronic Distributor
If your HEI equipped Chevy V8 is having problems
starting, has a rough idle or the performance is not what
it use to be, it could be time to change your distributor.
This distributor is specifically designed for 5.7L high
output engines. This distributor may be used for most
high performance applications.
With Cap and Rotor
G6000
black cap - GM .................... 209.99 ea
66940C
brown cap - Proform............ 89.99 ea
Without Cap and Rotor
66940WO Proform ................................ 94.99 ea
Distributor Components
HEI Battery and Tach Pigtail
When installing an HEI distributor or repairing a broken
lead, use this positive locking ten inch HEI pigtail lead.
170072 HEI pigtail connector .............. 9.99 ea
1967-82 Vacuum Advance
The vacuum advance is a
mechanism attached to the
distributor which moves the
breaker point or pickup coil
DV1465
plate when it receives vacuum
generated by the engine. Replace the vacuum
advance in your 1967-82 Firebird model.
1967-74 Distributor Lead
*Note: Except high altitude.
DV1465
DV1465
DV1465
DV1465
DV1465
DV1811
DV1465
DV1465*
DV1465*
DV1811
DV1847
DV1846
DV1859
DV1836
DV1847
DV1874
DV1859
DV1836
DV1861
DV1859
1967-68
1968
1969-72
1971-72
1973
1973
1973
1973-74
1974
1974
1977
1977
1978
1978
1978-79
1979
1979
1979
1979
1982
400...........................
350, 400 w/Ram Air
350, 400 w/AT.........
455...........................
400, 455 w/AT.........
350...........................
350 w/AT.................
400 w/2 bbl. carb.....
455...........................
400, 455 w/2 bbl. ....
350-R ......................
301-Y ......................
305-U dist. 1103282
305-U dist. 1103281
403-K .....................
350-L .......................
305-G dist. 1103282
305-G dist. 1103281
301...........................
5.0L-H .....................
11.99
11.99
11.99
11.99
11.99
9.99
11.99
11.99
11.99
9.99
17.99
9.99
14.99
16.99
17.99
18.99
14.99
16.99
14.99
14.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
Chrome Vacuum Advance Cover
Chrome plated steel cover that slides over factory
vacuum advance units. Attaches with double sided tape.
T4973
.................................................. 5.49 ea
Distributor Timing Indicator
Designed to fit all stock and aftermarket Chevrolet V6
& V8 distributors. The .062" thick steel degree plate
attaches to the intake manifold under the distributor and
the pointer clamps to the distributor housing. Allows
quick, accurate timing changes without a timing light.
226100
................................................. 34.99 ea
Distributor Clamp Wrench
1970-76 Distributor Hold Down Clamp
Correct clamp designed to hold the distributor housing
assembly. For use with all 1970-76 L6 models.
G9425 1970-76 .................................... 7.99 ea
A8700301
1968-69 Distributor Vacuum Control Valve
1964-79 Pontiac Distributor Clamp
Replacement distributor hold down clamp for 196479 Pontiac V8 engines. Manufactured to factory
specifications from heavy gauge steel to provide an
identical replacement for lost or damaged clamps.
Note: For Pontiac engines only. Will not work with
Oldsmobile 403 engines.
A8700192 1964-79 .................................
9.99 ea
FDV6906S
1969 Distributor Vacuum Lines
Reproduction distributor vacuum lines for use with
1969 6 cylinder models with overhead cam.
FDV6906 1969 OEM material ........... 16.99 ea
FDV6906S 1969 stainless material ...... 19.99 ea
K0054
This original replacement 3 way tee is for use with
5/ 32" hoses and is for use with all 1974 V8 engines.
G5135 1974 .......................................... 2.99 ea
Distributor Stud
Vacuum Advance Metal Tube
Correct metal tube which fits onto the intake and
hose. For use with aluminum intakes only. Mounting
clips included.
K0054A
400, 455 only ........................ 21.99 ea
K0054
all except 400, 455................ 23.99 ea
TA4066
These premium grade studs, which are equipped with
vibration-resistant J-form threads, in your choice
of black oxide finished chrome moly or rust-proof
stainless steel. Select from conventional hex or spacesaving 12-point nuts. Washers included.
Chevrolet Engine
Black Oxide
AR13172 hex head ................................ 5.99 set
AR13171 12-point ................................ 5.99 set
Stainless
AR43172 hex head ................................ 8.99 set
AR43171 12-point ................................ 11.99 set
Pontiac Engine
Black Oxide
AR19172 hex head ................................ 4.99 ea
AR19171 12-point ................................ 3.99 ea
Stainless
AR49172 hex head ................................ 10.99 ea
AR49171 12-point ................................ 19.99 ea
G9426
1967-81 Distributor Gaskets
Distributor gaskets for 1967-81 Pontiac L6 and V8
models. Seals the engine block to the distributor base.
TA4066 1967-81 4BBL V8 ................. 3.99 ea
G9426 1970-76 L6 ............................ 1.99 ea
Distributor Washer
The distributor washer is an integral part in maintaining
proper clearance between the gear and housing assembly.
Helps keep the shaft from shifting when properly
installed. Recommended replacing when rebuilding.
G6009
all
8 cylinder models. ..... 21.99 ea
479
These vacuum control valves are part of the CCS
emissions system on 1968 V8 models and 1969 Ram
Air III models with manual transmission. These
valves control the distributor's vacuum retard and
advance timing.
Distributor Control Valve
A8700102 1968 V8 w/MT ................. 99.99 ea
A8700102 1969 Ram Air III w/MT ... 99.99 ea
Distributor Control Valve Cap
A8100301 1968 V8 w/manual ............ 9.99 ea
A8100301 1969 Ram Air III w/manual 9.99 ea
Reach around obstructions to turn distributor lock nut
with this double ended wrench. Fits 1/2" and 9/16"
lock nuts. Use adapter to join wrenches together or
attach to 3/8" ratchet or extension.
X104
................................................... 27.99 ea
1977-79 Trans Am Distributor Hold Down
Reproduction distributor hold down clamp for 1977-79
Trans Am models with Olds 403. Secures the distributor
to the engine block.
TA4046 1977-79 Olds 403 .................. 14.99 ea
1974 3 Way Distributor Vacuum Tee
A8700102
This is an original AC Delco replacement distributor
lead. Replace your electrical components with AC
Delco parts, you'll be glad you did!
12338662 1967-74 Pontiac V8............. 5.99 ea
Starters
3510S
K
1967-95 Remanufactured Starters
Replace your worn out starter with these quality
remanufactured starters. They are remanufactured to
original specifications and will install and function
as original.
6 Cylinder
3664S
1970-74 ................................. 64.99 ea
3664S
1975-76 w/MT....................... 64.99 ea
3508S
1975-76 w/AT........................ 64.99 ea
3664S
1977-81 ................................. 64.99 ea
3664S
1982-86 151........................... 64.99 ea
3510MS 1982
173 VIN 1................ 69.99 ea
3664S
1983
151 to mid 1983 ...... 64.99 ea
3664S
1983
151 mid 1983-on ..... 64.99 ea
3510MS 1983
173........................... 69.99 ea
3664S
1984-86 151........................... 64.99 ea
6313MS 1984-89 173........................... 72.99 ea
3664S
1989
231........................... 64.99 ea
6313MS 1990
................................. 72.99 ea
8 Cylinder
3696S
1967
326........................... 69.99 ea
3505S
1968-76 350 w/std ................. 64.99 ea
3696S
1968-76 350 w/opt. HD......... 69.99 ea
3696S
1967-79 400........................... 69.99 ea
3696S
1971-76 455........................... 69.99 ea
3505S
1977
301........................... 64.99 ea
3696S
1977
350 VIN P ............... 69.99 ea
3505S
1977
350 VIN R ............... 64.99 ea
3689S
1977-78 305 w/MT................ 94.99 ea
3508S
1977-78 305 w/AT................. 64.99 ea
3696S
1977-79 403........................... 69.99 ea
3689S
1978-79 350 Chev. engine w/MT 94.99 ea
3510S
1978-80 350 Chev. engine w/AT 67.99 ea
3504S
1979-81 265, 301................... 49.99 ea
3689S
1979
305 w/MT................ 94.99 ea
3508S
1979
305 w/AT................. 64.99 ea
3664S
1980
305........................... 64.99 ea
3689S
1981
305 w/MT................ 94.99 ea
3508S
1981
305 w/AT................. 64.99 ea
3689S
1982
305 VIN H w/MT.... 94.99 ea
3664S
1982
305 VIN H w/AT ..... 64.99 ea
3664S
1982
305 VIN 7................ 64.99 ea
3664S
1983
305 VIN H, S .......... 64.99 ea
3664S
1984
305 VIN H............... 64.99 ea
3664S
1984-85 305 VIN H w/MT.... 64.99 ea
3664S
1984-86 305 VIN H w/AT ..... 64.99 ea
3664S
1984-86 305 VIN G............... 64.99 ea
3664S
1985-90 305 VIN F w/MT .... 64.99 ea
3664S
1985-90 305 VIN F w/AT ..... 64.99 ea
3664S
1987
305 VIN H w/MT.... 64.99 ea
3664S
1987
305 VIN H w/AT ..... 64.99 ea
3664S
1988-90 305 VIN E w/MT .... 64.99 ea
3664S
1988-90 305 VIN E w/AT ..... 64.99 ea
3664S
1987-92 350........................... 64.99 ea
1993-01 Replacement Starters
Classic Industries® offers direct replacement brand
new starters for your Firebird. Designed to replace
your worn out or non-working starter these will install
and function just like original.
6 Cylinder - 231
N6431 1995-97 ................................... 129.99 ea
N6484 1998-01 ................................... 150.99 ea
V8 - 350
N6442 1993-94 w/Delco PG 250 Starter 123.99 ea
N6470 1995-97 w/Delco PG 260 Starter 123.99 ea
N6482 1998-01 ................................... 134.99 ea
480
FC2014
1967-81 Genuine GM Remanufactured Starters
Original AC Delco remanufactured starter motor.
Replace your original worn out starter with a AC Delco
starter. We offer these original style rebuilt starters for
1st or 2nd generation models. Maintain originality along
with the reliability of a factory replacement. Aftermarket
starters are good but they don't offer a cosmetically
correct appearance. Each starter is completely
remanufactured and tested before leaving the factory.
Note: *Pontiac V8 except 326-350.
No exchange required
G9130* 1967-69 Pontiac V8 .................
G9131 1967-68 Pontiac 326-350 ........
G9130 1970-71 Pontiac 350................
G9130 1970-75 Pontiac 400, 455........
G9131 1972-75 Pontiac 350................
G7245 1975-76 Chevrolet 250 w/AT ..
G9130 1976
Pontiac V8 .................
G7244 1977
350-L w/AT ..............
G9131 1977
301.............................
G9130 1977
350-P, 350-R, 400, 403
G7245 1978-79 305-U, 305-G w/AT ..
G7245 1980
305-H ........................
G7245 1981
267 Export, Canada...
74.99
83.99
74.99
74.99
83.99
109.99
74.99
109.99
83.99
74.99
109.99
109.99
109.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
1998-02 F-Body LS1, LS2 and LS6 Starters
Bench tested to meet or exceed stated specifications,
these high torque starters for use with LS1, LS2 and
LS6 engines feature a 1.9 HP motor to easily crank
high compression engines. Available in your choice
of chrome or gold zinc finish, these starters offer easy
bolt-in installation. Made in the USA with 100% new
components.
FC2014 1998-02 chrome ................... 171.99 ea
FC2015 1998-02 gold zinc ................ 129.99 ea
S3631
S3510A
1967-92 OEM High Torque Starters
Classic offers high torque starters that will replace
your original with upgraded performance and OEM
appearance. Mounting method described below.
Made in USA.
S3655 1967-79 1 long bolt ............... 143.99 ea
S3631 1970-81 1 long/1 short bolt ... 143.99 ea
S3510A 1977-78 staggered pad .......... 143.99 ea
S3631 1984-92 1 long/1 short bolt ... 143.99 ea
5095
5097
S9510
MSD DynaForce Starters
These MSD DynaForce starters are designed for
severe duty, high compression applications. The
3.4 hp motors use a 4.4:1 gear reduction to easily
start even an 18:1 engine with a lower current draw
than traditional starters. Features a red powder coat
finish and nickel plated solenoid with a three position
adjustable mounting block so they can be clocked for
easier installation. Small block Chevy models have a
straight mount bolt pattern and work with 153 and 168
tooth flywheels. Made in USA.
Note: LS1/LS7 starter not compatible with GTO LS
engines. No further discounts apply.
5095
5096
5097
Starters & Accessories
small block Chevy starter ........ 279.99 ea
LS1/LS7 starter........................ 294.99 ea
326, 455 ci Pontiac starter ....... 384.99 ea
S9502
1967-92 High Torque Performance Starters
High torque, light weight performance starters.
Performance starters feature up to 200 ft. lbs. of torque,
4.4:1 gear reduction, billet aluminum adapter blocks,
and only weigh 8 lbs! Made in USA.
Pontiac/Oldsmobile
S9510
166 tooth/200 ft. lbs .............. 233.99 ea
S9610
166 tooth/180 ft. lbs .............. 199.99 ea
Pontiac/Chevy
S9502
153 tooth/200 ft. lbs .............. 233.99 ea
Starters and Accessories
G7255
1967-74 Pontiac Starter Brace
Starter Heat Shield™ Set
In today’s high-heat environment, starters take in a
lot of damaging heat that destroys the windings of the
starter and solenoid. To combat this problem, we offer
a nonconductive strap-on heat shield with a highlyreflective mylar surface. The Starter Heat Shield™ will
reflect over 90% of radiant heat, adding life to the starter
and assuring reliable starts. The Starter Heat Shield™
is a universal set that fits all starters.
TT1002 kit with straps ........................... 25.99 set
1967-81 Starter Motor Attachment Bolts
Replacement bolts used on Firebird models
with Pontiac and Chevrolet engines and manual
transmissions. 3/8"-16 x 3-5/8".
Pontiac
TA4020 1967-72 2 piece....................... 9.99 set
Chevrolet
3733289 1978
305-U, 350-L w/M20 3.99 ea
3733289 1981
305 w/M24 ............... 3.99 ea
Reproduction starter brace for 1967-74 Firebird/Trans
Am models with Pontiac V8 engines. Make sure that
you have the correct Pontiac starter brace that helps
relieve the pressure that is put on the starter when
being engaged or while driving.
F12393 1967-74 326-455 ................... 21.99 ea
1970-77 Pontiac Starter Brace
1967-97 Starter Solenoid
The starter motor solenoid commonly needs replacing
due to heavy use and heat which is generated from the
engine and exhaust manifolds.
G7255 1967-81 GM .......................... 46.99 ea
SS304
1967-81 repro ........................ 19.99 ea
SS327
1982-90 ................................. 19.99 ea
WE404 1991-92 3.1, 5.0 ..................... 49.99 ea
SS327
1991-92 5.7 ............................ 19.99 ea
WE404 1993-95 3.4 ............................ 49.99 ea
SS906
1995-97 3.8,5.7 ...................... 49.99 ea
Reproduction starter brace for 1970-77 models.
This bolts to the end of the motor mount and the
back of the starter for additional support. Identical
to factory original.
1253520 1970-77 ................................... 18.99 ea
SS327G
1967-92 Gold Series Starter Solenoid
1970-77 Starter Wire Clamp
Reproduction of Pontiac coated starter wire clamp bolts to the end of the motor mount to keep the starter
wires away from the manifold on all Ram Air vehicles.
1253521 1970-77 ................................... 16.99 ea
The gold series solenoids are made of high-temperature
insulated wire for better heat resistance, nickel-plated
mounting bracket for better ground and increased
contact area on studs for higher electrical current
capacity and longer life.
SS304G 1967-81 ................................. 39.99 ea
SS327G 1982-90 ................................. 31.99 ea
SS327G 1991-92 5.7 ............................ 31.99 ea
1977-81 Starter Motor Braces
Over a period of years, the starter motor braces are
usually lost or discarded when the starter is replaced.
Without this brace, undue strain will occur to the
starter motor body causing wear or damage. When this
happens you will need to replace the starter.
G5111 1977-81 Chevy small block..... 5.99 ea
Starter Motor Replacement Brushes
When rebuilding your original starter motor, it is usually
necessary to replace the brushes. The brushes are the
most commonly worn out part of the starter which can
cause failure. These brushes have a 13/64" diameter hole.
4 required per starter motor. Each set includes 4 brushes.
RX6004 1967-81 .................................. 3.99 set
Remote Starter Solenoid
Allows you to position the starter solenoid any place
you need to in order to make maintenance easier. Comes
with of extra wire and connectors to do the job right.
1964-77 Starter Solenoid Heat Shield
Starter Motor Solenoid Heat Shield
This heat shield is used for all standard (non-metric)
solenoids on V8 model cars and trucks. Features easy
mounting and is produced in stainless steel.
DK1107
V8 non-metric ................... 17.99 ea
30203
1967-79 Starter Shims
.................................................. 79.99 ea
5-piece starter shim set for various Pontiac models.
(1) 1/16" shim, (2) 1/32" shims and (2) 1/64" shims.
Used to shim the starter to the engine block.
TA4021 1967-79 5 piece set ................ 8.99 set
Remote Control Starter Switch
Hot Shot Starter Solution
Use to bypass the ignition switch on any engine with
solenoid starter switch. Lets you crank the engine while
working in the engine compartment. Includes 44" long
leads. Connect from the positive terminal of battery
to energizing terminal of solenoid. Use for generator,
starter, electrical tests, setting ignition points, fuel
pump tests, adjusting tappets and compression tests.
Y20750 .................................................. 19.99 ea
The solution for vehicles with starters that are hard
to start when hot, or vehicles with old or worn out
electrical systems. The “Hot-Shot” Plus model includes
an engine bump switch which allows you to turn over
the engine while working in the engine compartment.
30201
30202
with engine bump switch ........ 64.99 ea
without bump switch ............... 34.99 ea
Starters & Accessories
481
Reproduction starter solenoid heat shield for various
1964-77 Pontiac models with 326-455 ci engines.
The two piece riveted steel waffle design provides
superior thermal protection for starter solenoids on
models without Ram Air exhaust manifolds. Designed
for starters that mount on the driver side.
A8700128 1964-77 ................................ 28.99 ea
Alternators
1967-89 Quality Remanufactured Alternators
Internal & External Regulator Alternator Indentification Guide
External Regulator Internal Regulator
"SI" Type
Connector
Socket
Connector
Socket
Internal Regulator
"CS" Type
Connector
Socket
We offer a huge selection of remanufactured
alternators, but sometimes it is more cost effective
on late model vehicles to replace with a brand
new unit. For this reason, we have chosen not
to list remanufactured units on these late model
vehicles. If your late model is not listed here,
check our listings for brand new alternators.
Remanufactured and Tested to OE Specifications!
No Core Charge!
Note: For proper identification, you may need to check your
VIN code on listings with suffixes after the engine size.
7127U3
6 Cylinder
Battery Terminal
1963-74
Battery Terminal
1969-85
Battery Terminal
1986-Present
Clocking Position Indentification Guide
adjusting ear
12 o’clock
terminal socket
3 o’clock
9 o’clock
pivot ear
K
6 o’clock
The Delco SI series alternator are manufactured so that the rear half of the alternator
case can be assembled to the front half of the case in any one of four positions. These
positions are referred to as the “clock” positions. Clock positions are determined by
viewing the alternator from the rear with the threaded mounting hole (adjusting ear)
straight up. With this view, the terminal socket for the two wire plug-in connector
will point to any one of the four available “clock” positions. Straight up is 12 o’clock,
to the right is 3 o’clock, straight down is 6 o’clock and to the left is 9 o’clock.
Having the different clock positions allows for the alternator to be mounted on the
left side or right side of the engine. It can also be mounted right side up or upside
down depending on the clock position. This allowed for the SI series alternator to
be used on many different applications.
Alternator Conversion Adaptors
Easy-to-use conversion plugs are designed to adapt your wire harness to upgrade
your charging system with a later model, internally regulated alternator.
CA27555 external regulator to 1985 & earlier “SI” type alternator ......... 19.99 ea
CA37787 external reg. harness to 1986 & later “CS130” type alternator ..... 24.99 ea
CA37796 1985 & earlier “SI” harness to “CS130” type alternator .......... 21.99 ea
482
Alternators
External Regulator
7122
1967
7122
1968-69
Internal Regulator
7127U6 1982
7137U6 1982
7127U6 1983-84
7273U6 1983-84
7273U6 1985
7273U9 1985
7273U6 1985
7273U9 1985
7290U6 1985
7273U9 1986
7290U6 1986
7860U11 1987-89
7860U11 1990-92
7127U3 1977
7127U3 1978-81
7127U3 1977-80
7127U12 1980
7137U12 1981
7805U5 1989
7127U9 1970-74
7135M 1971-74
7127U9 1975-76
External Regulator
7122
1967
7122
1968
7122
1969
7122
1967-68
Internal Regulator
7145U6 1980
7127U12 1980-81
7137U12 1980-81
7127U9 1977-79
7127U12 1980-81
7137U12 1980-81
7127U9 1977
7127U3 1978-79
7127U3 1980
7127U12 1980
7137U3 1981-82
7127U3 1981-84
7134U3 1982
7137U3 1982
7134U3 1982
7137U3 1983
7134U3 1983
7273U3 1983-84
7273U6 1985
7127U3 1985
7273U9 1985
7127U3 1985
7273U9 1985
7287U9 1985
7273U9 1985-86
7273U9 1985-86
7273U9 1986
7127U9 1969
7127U9 1970-76
7135M 1970-76
7127U9 1977
7127U3 1978-79
7127U9 1969-76
7135M 1969-76
7127U9 1977-79
7127U9 1977-79
7127U9 1971-76
7135M 1971-76
55A
55A
230
250
63A
70A
63A
78A
78A
78A
78A
78A
108A
78A
108A
100A
100A
63A
63A
63A
63A
70A
120A
63A
80A
63A
2.8/173
without AC .........................
2.8/173
with AC ..............................
2.8/173
without AC .........................
2.8/173
with AC or rear defrost ......
2.8/173
without AC, 1st design .......
2.8/173
without AC, 2nd design......
2.8/173
with rear defrost, 1st dsgn ..
2.8/173
with rear defrost, 2nd dsgn.
2.8/173
with AC ..............................
2.8/173
without AC or rear defrost .
2.8/173
2.8/173
all........................................
3.1/189-T all........................................
3.8/231
without AC .........................
3.8/231
without AC .........................
3.8/231
with AC ..............................
3.8/231
with AC and rear defrost ....
3.8/231
3.8/231-7 turbo ...................................
250
all........................................
250
HD option...........................
250
all........................................
8 Cylinder
all........................................ 69.99 ea
all........................................ 69.99 ea
55A
55A
55A
55A
326
350
350
400
63A
63A
70A
63A
63A
70A
63A
63A
63A
63A
70A
63A
85A
70A
85A
70A
85A
78A
78A
63A
78A
63A
78A
120A
78A
78A
78A
63A
63A
80A
63A
63A
63A
80A
63A
63A
63A
80A
4.3/265
4.3/265
4.3/265
4.9/301
4.9/301
4.9/301
5.0/305-U
5.0-U,G
5.0/305-H
5.0/305-H
5.0/305-H
5.0/305-H
5.0/305-H
5.0/305-7
5.0/305-7
5.0/305-S
5.0/305-S
5.0/305-H
5.0/305-G
5.0/305-G
5.0/305-G
5.0/305-H
5.0/305-H
5.0/305-H
5.0/305-H
5.0/305-H
5.0/305-G
5.7/350
5.7/350
5.7/350
5.7-P,R
5.7/350-L
6.6/400
6.6/400
6.6/400
6.6/403
7.5/455
7.5/455
74.99
89.99
74.99
99.99
99.99
99.99
99.99
99.99
118.99
99.99
118.99
107.99
107.99
74.99
74.99
74.99
74.99
89.99
129.99
74.99
104.99
74.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
all........................................
all........................................
all........................................
all........................................
69.99
69.99
69.99
69.99
ea
ea
ea
ea
with AC, optional 1st dsgn .
all........................................
with AC, optional 2nd dsgn
all........................................
all........................................
with HD option ..................
all........................................
all .......................................
all w/o elec trunk release....
with electric trunk release ..
4bbl, w/AC or rear defrost .
4bbl, without AC ...............
4bbl, with HD option ........
4bbl, all ..............................
4bbl, with HD option .........
FI, all ..................................
FI, with HD option ............
4bbl, with AC .....................
HO, w/o AC 1st design ......
HO, w/o AC 2nd design .....
HO, with rear defroster ......
4bbl, w/o AC, 1st design ....
4bbl, w/AC, 1st design .......
4bbl, w/HD option .............
4bbl, w/o AC, 2nd design...
4bbl, w/rear defrost ............
HO, without AC .................
all........................................
all........................................
with HD option ..................
all........................................
all .......................................
all........................................
with HD option ..................
all........................................
all........................................
all........................................
with HD option .................
51.99
74.99
89.99
74.99
74.99
89.99
74.99
74.99
74.99
74.99
89.99
74.99
89.99
89.99
89.99
89.99
89.99
99.99
99.99
74.99
99.99
74.99
99.99
118.99
99.99
99.99
99.99
74.99
74.99
104.99
74.99
74.99
74.99
104.99
74.99
74.99
74.99
104.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
Alternators
1983-02 OE Quality New Alternators
Direct replacements for your original alternator. These
brand new (NOT remanufactured) alternators will
install and function as original. We offer a wide
selection of different applications depending upon
your year and engine. Appearance may differ slightly
from original. If your earlier model Firebird is not
listed here, check our listings for remanufactured units.
Note: You may need to check your VIN code on listings with suffixes
after the engine size.
N8114U3
6 Cylinder
Internal Regulator
N7294U6 1983-84
N7294U6 1985
N7294U9 1985-86
N7860U11 1987-89
N7860U11 1990-92
N8114U3 1993-95
N7911U4 1989
N8200U11 1995-99
N8272U11 2000-02
94A
94A
94A
105A
105A
105A
120A
105A
105A
2.8/173
with HD option ............... 93.99 ea
2.8/173
without AC, 1st design .... 93.99 ea
2.8/173
without AC, 2nd design... 93.99 ea
2.8/173
all..................................... 93.99 ea
3.1/189-T all..................................... 93.99 ea
3.4/207
all..................................... 93.99 ea
3.8/231-7 turbo ................................ 134.99 ea
3.8/231
all..................................... 124.99 ea
3.8/231
all..................................... 139.99 ea
8 Cylinder
Internal Regulator
N7294U3 1983-84
N7294U3 1984
N7294U6 1985
N7294U9 1985-86
N7294U9 1985-86
N7294U9 1986
N7290U9 1985-86
N7858U11 1987
N7858U11 1987
N7917U11 1988-89
N7861U11 1990-92
N7858U11 1987
N7917U11 1988-89
N7861U11 1990-92
N8119
1993-94
N8172U7 1994-97
N8242U5 1998-02
94A
94A
94A
94A
94A
94A
108A
105A
105A
105A
105A
105A
105A
105A
124A
140A
102A
5.0/305-H
5.0/305-G
5.0/305-G
5.0/305-H
5.0/305-G
5.0/305-G
5.0/305-F
5.0/305-H
5.0/305-F
5.0-E,F
5.0-E,F
5.7/350-8
5.7/350-8
5.7/350-8
5.7/350-P
5.7/350-P
5.7/350-G
S7127
4bbl., with AC ................. 93.99 ea
HO, all ............................. 93.99 ea
HO, w/o AC .................... 93.99 ea
4bbl., all .......................... 93.99 ea
HO, w/AC ....................... 93.99 ea
HO, w/o AC .................... 93.99 ea
MFI, all ........................... 129.99 ea
4bbl., all .......................... 93.99 ea
4bbl., all .......................... 93.99 ea
EFI/MFI, all .................... 93.99 ea
EFI/MFI, all .................... 93.99 ea
all..................................... 93.99 ea
all..................................... 93.99 ea
all..................................... 93.99 ea
all, 1st design .................. 150.99 ea
all, 2nd design ................. 150.99 ea
all..................................... 129.99 ea
S17127
S17294
1970-86 1-Wire GM Alternator
Reproduction chrome alternators that match the original and offer the amperage
you need. Select from a variety of alternators listed below. Improve the overall
appearance of your engine compartment with a chrome alternator. Each alternator
is a 1-wire design, with an internal regulator in chrome or satin finish. Made in USA
Internal Regulator
S7127
1970-86
satin
70 amp ........................................... 121.99 ea
S17127
1970-86
chrome 70 amp ........................................... 148.99 ea
S17294
1970-86
chrome 100 amp ......................................... 153.99 ea
S37293
1970-86
chrome 140 amp ......................................... 196.99 ea
S82071
S182071
115 Amp Mini Alternator
This 115 amp mini alternator is a great addition for any modified or high performance
engines. Available in standard or chrome style. Includes internal regulator. Made
in USA.
Internal Regulator
S82071
standard............................................................................. 184.99 ea
S182071
chrome .............................................................................. 234.99 ea
S8002
1967-02 Performance Alternators
5362
MSD DynaForce Alternators
DynaForce blue-printed alternators cover your electrical needs whether it's a high
output Street Series unit for a high feature street rod, or a low output, low drag Track/
Racing unit for a purpose built race car. Street Series alternators are offered with
chrome, black, and natural finishes and are designed to fit most GM bracket systems
from the 1960's to the 80's with a simple one wire hook up. Racing alternators are
available in a 50 amp Denso style or 100 amp GM style and are compatible with 12
and 16 volt electrical systems thanks to an adjustable voltage regulator. They feature
the same one wire hook up and a red wrinkle finish. Every alternator assembly is
tested and is delivered with proof of performance. Made in USA.
Street Alternators
5321
120 amp
5361
160 amp
5322
120 amp
5362
160 amp
black finish......................................................
black finish......................................................
chrome finish ..................................................
chrome finish ..................................................
Alternators
254.99
299.99
274.99
319.99
ea
ea
ea
ea
483
Classic offers quality replacement alternators for 1967-02 Firebird models. We also
offer performance alternators that offer higher amp output than stock replacements.
Made in USA.
External Regulator
S7102
1967-69
60 amp
................................................. 127.99 ea
Internal Regulator
S7127
1970-82
60 amp
all............................................. 121.99 ea
S8002
1983-85
100 amp
all ............................................ 132.99 ea
S8002
1986
100 amp
5.0L ........................................ 132.99 ea
S7802
1987
105 amp
5.0L, 5.7L................................ 148.99 ea
S7860
1987-92
105 amp
2.8L, 3.1L................................ 148.99 ea
S7861
1988-92
105 amp
3.1, 5.7L ................................. 149.99 ea
S7864
1993-94
105 amp
5.7L ........................................ 292.99 ea
S8114
1993-97
105 amp
3.4L ........................................ 148.99 ea
S7805
1995-97
140 amp
5.7L LT-1 ................................. 292.99 ea
S48242 1998-02
150 amp
5.7L LS-1 ................................ 244.99 ea
Hi Amperage with Internal Regulator
S8002
1967-82
100 amp
all............................................. 132.99 ea
S47294 1983-85
140 amp
all............................................. 174.99 ea
S47294 1986
140 amp
5.0L ......................................... 174.99 ea
S47802 1987
140 amp
3.1, 5.7L .................................. 174.99 ea
S47860 1987-92
140 amp
3.1, 3.1L .................................. 174.99 ea
S47861 1988-92
140 amp
3.1, 5.7L .................................. 174.99 ea
S47864 1993-94
200 amp
5.7L ......................................... 386.99 ea
S48114 1993-97
140 amp
3.4L ......................................... 174.99 ea
S47805 1995-97
200 amp
5.7L LT-1 ................................ 386.99 ea
Alternator Components
WE209
l Remy"
"Delco
markings
S17102
1967-94 Chrome Alternators
High quality, triple chrome plated alternators will
enhance the look of your engine compartment.
Available to fit most Firebirds from 1967-94. These
alternators are high quality triple chrome plated
versions of the originals. Available for models with
or without air conditioning.
External Regulator
S17102 1967-69 70 amp 6 cyl & V8 .. 153.99 ea
Internal Regulator
S17127 1970-82 70 amp all ................ 148.99 ea
S17294 1983-86 100 amp 2.8L w/o AC 153.99 ea
S17294 1983-86 100 amp 305, TPI ...... 153.99 ea
S17290 1983-86 140 amp 2.8L w/AC . 217.99 ea
S17802 1987
105 amp 3.1, 5.7L ..... 196.99 ea
S17860 1987-92 105 amp 3.1, 3.1L...... 194.99 ea
S17861 1988-92 105 amp 3.1, 5.7L ..... 200.99 ea
S17864 1989
140 amp 3.8L Turbo .. 334.99 ea
S17864 1993-94 140 amp 5.7L............. 334.99 ea
1967-72 Reproduction Voltage Regulator
OER® reproduction OE style voltage regulator which
replaces the original units on 1967-72 models. This 63
amp regulator features the “Delco Remy” markings.
For use with external regulator models. Pre-packaged
in OER® box.
1119519 1967-72 63 amp.................. 69.99 ea
C19515
VR635C
VR723
1253554
Alternator Stud
ARP’s “bulletproof ” alternator studs are made from
a premium grade 8740 chrome moly steel alloy and
heat treated to a nominal 200,000 psi tensile strength.
They are very rigid and won’t bend under the stress,
eliminating problems with alternator pulley alignment.
Available in 5" and 5-1/4" lengths. Includes a 12-point
nut and flat washer. 1" coarse thread on one side and
1" fine thread on the other side.
AR351
7/16" 5" long ........................... 9.99 set
AR352
7/16" 5-1/4" long..................... 9.99 set
VR715
VR781
FC2006
K
1967-02 Alternator Pigtail
Usually burnt or corroded the alternator pigtail is a
very important item in keeping your vehicles charging
system operating correctly. Replace the alternator
pigtail in your 1967-02 Firebird model if it is burnt
or corroded with this fine reproduction.
WE209 1967-74 ................................... 2.99 ea
WE205 1970-88 ................................... 3.99 ea
494
1995-02 ................................... 26.99 ea
1967-72 Voltage Regulator
Replacement external voltage regulators for 1967-72
models. Available in black or chrome.
C19515
1967-72 black .................... 59.99 ea
VR635C 1967-72 chrome ................. 38.99 ea
FC2001
WE205
1967-97 Voltage Regulator
External regulators are normally located on the
fenderwall in the engine compartment. Internal
regulators are mounted in the alternator housing. Fits
1967-97 Firebird models.
VR715 1967-70 external regulator ...... 49.99 ea
VR723 1969-88 internal regulator ....... 11.99 ea
G7235 1967-70 63 amp GM ............... 67.99 ea
G7236 1971-81 62 amp GM ............... 19.99 ea
VR780 1986
2.5L-2, w/85 amp. alt 45.99 ea
VR723 1986
108 amp. alt............... 11.99 ea
VR723 1987
37,42,56,66,78,94 alt . 11.99 ea
VR781 1987
85,100,105,108 alt..... 42.99 ea
VR723 1988
78, 94 amp. alternator 11.99 ea
VR781 1987-97 all............................... 42.99 ea
1967-72 Alternator Housing Bolts
Reproduction alternator assembly bolts. These bolts
hold the two halves of the alternator housing/case
together. Available in 4 piece sets with phosphate or
silver zinc plating.
1253554 1967-72 phosphate plating .... 7.99 set
1253555 1967-72 silver zinc plating .... 7.99 set
1998-02 F-Body LS1 Alternators
Bench tested to meet or exceed stated specifications,
these alternators for 1998-02 LS1 engines are available
in stock 105 amp rating or high output 140 amp rating
in chrome, polished, black and cast finishes. A direct
bolt-in replacement for stock components. Made in
the USA with 100% new components.
FC2001 1998-02 105 amp, chrome ..... 179.99 ea
FC2002 1998-02 105 amp, polished.... 189.99 ea
FC2003 1998-02 105 amp, cast ........... 142.99 ea
FC2004 1998-02 140 amp, chrome ..... 199.99 ea
FC2005 1998-02 140 amp, polished.... 199.99 ea
FC2006 1998-02 140 amp, black ........ 179.99 ea
484
66440
1967-80 Alternator Bracket Spacer
Replacement GM alternator bracket spacer which was
used on all 1967-80 V8 Firebirds with 42, 55 and 61
amp alternators, and 1970-75 6 cylinder Firebirds. Cut
to length as required.
3825451 1967-80 .................................... 2.99 ea
1967-86 Chrome Alternator Case Set
Replace the alternator case with this alternator case set.
For use with external or internal regulators.
66440
1967-72 external .................... 39.99 set
66441
1973-86 internal..................... 64.99 set
14716
G4283
14717
Terminal Cap and Retainer
Alternator wire terminal cap and retainer used on most
all vehicles equipped with a GM threaded-post type
alternator. The retainer attaches behind the alternator
post lead and has the clip edge to accept the cap. These
protective pieces are made of injected molded plastic
and each retainer is color coded to match the cap.
14716
black cap and retainer .............. 14.99 set
14717
red cap and retainer .................. 14.99 set
1967-72 Rear Alternator Rubber Boot
Reproduction of the rubber boot which is located on
the wiring loom where it plugs into the rear of the
alternator. This is an excellent reproduction of the
original rubber boot.
K0105 1967-72 .................................... 2.99 ea
1969-70 Alternator Mounting Set
G4286
Complete mounting set includes mounting bracket,
bolt and spacer. Can be used with all Pontiac V8s
with 1969 and up style timing covers. Popular with
Ram Air and race cars. For use on Pontiacs without
power steering.
PY11
1969-70 ................................... 44.99 set
G4284
1998-02 Rear Alternator Brace
Original GM rear alternator brace is mounted on the
rear of the alternator for support.
G4283 1998
6 cyl. ........................ 9.99 ea
G4286 1998-02 8 cyl. ........................ 20.99 ea
G4284 1999-02 6 cyl. ........................ 9.99 ea
1977-86 Upper Bracket
This original bracket was factory installed on 1977-86
Firebird models with small block Chevrolet engines.
1977
305, 350-L
1978-79 305-G, 305-H, 305-U, 350-L
1979-81 305-G, 350-L
1982-86 305
14081227 1977-86 ................................. 24.99 ea
1970 Alternator Bracket Set
High quality reproduction alternator mounting bracket
set for 1970 Firebird/Trans Am. These brackets were
used on 350, 400 and 455 ci RA III and RA IV and
HO models with power steering. Designed to replace
GM part numbers 480515 and 480517.
A8700123 1970 bracket set............... 99.99 set
1967-70 Alternator Pivot Bracket
Reproduction of the alternator pivot mounting bracket
used on 1967-70 Firebirds with V8 engines and power
steering.
C869111 1967-70 ................................ 14.99 ea
Reproduction of the front alternator mounting brackets
used on 1967-69 Firebirds with V8 engines and power
steering.
C869121 1967-68 ................................ 21.99 ea
C963131 1969 ..................................... 21.99 ea
1988-92 Alternator Bracket
Replace your missing or broken alternator bracket with
this original GM unit. This is the correct alternator and
power steering pump bracket found on all 1988-92
Firebire models.
G5755 1988-92 V8 ........................... 70.99 ea
A8700186
A8700185
1966-74 Alternator Code Stamps
1967-69 Rear Alternator Mounting Bracket
1989-92 Alternator Bracket
Reproduction of the rear alternator mounting bracket
used on 1967-69 Firebirds with V8 engines and
power steering.
C869131 1967-69 ................................ 23.99 ea
Correct replacement alternator bracket found on all
1989-92 Firebird models with the 5.0E, 5.0F, and
5.7-8 engines.
G7265 1989-92 .................................... 4.99 ea
To guarantee that vehicles were correctly assembled,
parts were marked with specific codes to make them
easy to identify. Alternators were commonly stamped
with black or dark purple paints and inks. These
reproductions duplicate the alternator code stamps
used on 1966-74 Pontiac models.
A8700185 1966-70 XC 37 amp w/o AC 12.99 ea
A8700186 1966-70 XB 55 amp w/AC... 12.99 ea
A8700187 1971-74 SN 37 amp w/o AC 12.99 ea
485
C869121
1967-69 Front Alternator Mounting Bracket

Hi Performance Crate Engines From GM

Transcription

Similar documents

technician training

Dual Port, Four Barrel, Aluminium lnlet Manifold. Crane Cam and

Energy Saving and CO2 Reduction by MACH Gas Engine Series

oil flyer 22.qxp - Cen-Pe-Co

S-3 Oil Flyer - Cen-Pe-Co

Suzuki GSX R 600

nordhavn 62

Renovators Supply, Inc.© www.rensup.com

TROUbLESHOOTING - parts4heating.com