The Selection

Transcription

The Selection

05
YOUR INDUSTRIAL SUPPLY DISTRIBUTION COMPAGNY
HORS SERIE
MEMBER
From september the 1st to december 31th 2015
Jusqu’à épuisement des stocks
GREASES AND AEROSOLS P.19
L’éditorial
Following the publication of two special issues (MILWAUKEE and MOLYDAL)
in 2015, LA SELECTION is renewing this fall with the format responsible for
the success of its first four editions.
With issue no. 5 of THE SELECTION, all the companies of the FICODIS group
are confirming their commitment to offering you not only the quality of their
front office and of their technical expertise, but also their attractive offers
and products sure to meet your expectations and requirements.
It is with the manufacturer’s help that we select the best products on
HORS SERIE
the market as well as those likely to truly make a difference. It is in this
perspective that we concluded an exclusive CANADA partnership with
MOLYDAL, a manufacturer of industrial lubricants. Recognized since 1958 in
the area of lubrication, MOLYDAL offers, in addition to the usual products,
CABLE REEL
SELECTION GUIDE
a comprehensive lineup of eco-friendly and efficient lubrication products!
P.14
A selection of the most popular products is presented on page 19. Our sales
personnel are at your service any time should you wish to be presented this
exclusive product lineup!
Since our last exchange, the FICODIS group has secured new competencies
by acquiring Company PIQ (Pièces Industrielles de Québec), a firm based
in Lévis and specializing in the distribution, design and repair of hydraulic,
mechanical, pneumatic, and electrical parts. You can find additional detail on
their know-how by turning to pages 16 & 17.
Our experts have prepared for you a guide for the selection of reels so that
you may safely optimize your pneumatic performances.
SEE P.12
In this new issue, we are presenting two local manufacturers: Dynamic
Safety, with a whole lineup of innovative goggles; and Vulcan, the only
Canadian manufacturer of electric hoists that can offer you customized
products in just one week of production.
Once again, this issue of Selection was prepared with the greatest care by
HOIST - PALAN
our professional teams. We hope that it will fully meet your expectations.
Best regards,
QUÉBEC
Despite the care that has been dedicated to
the preparation of THE SELECTION, errors
could have occured. In case of disparity
between the prices of the showcased items in
the magazine and those displayed in store, the
latest will prevail.
Christophe Bévi llard
Président
ENTREPRISE DU GROUPE
SOREL-TRACY
DRUMMONDVILLE
La compagnie de distribution de fournitures industrielles
MONTRÉAL
GRANBY
OTTAWA
P. 2 l Valid until DECEMBRER 31th 2015 - This offer is only valid while stocks last. Non contractual photographs.
Cutting disc Gemini Rightcut Type 1
Unit price, sold in packs of 25
Good, versatile choice for steel
and ferrous metals.
199 $
4-1/2 x .045 x 7/8
214 $
5 x .045 x 7/8
228 $
5 x .045 x 7/8
250 $
6 x .045 x 7/8
233 $
6 x .045 x 7/8
269 $
66252823602
FI-05-007
66252823603
FI-05-008
66252823604
FI-05-009
66252842026
FI-05-013
66252842036
FI-05-014
66252842202
FI-05-015
Prix unitaire, vendu en paquet de 250
S
ILlle
SE
4-1/2 x .045 x 7/8
180 $
4-1/2 x .045 x 7/8
191 $
5 x .045 x 7/8
208 $
5 x .045 x 7/8
225 $
6 x .045 x 7/8
2
6 x .045 x 7/8
246 $
66252841213
FI-05-010
R NOS
PA
CON
LIVRAISON
66252841214
FI-05-011
EXPERT
ande
mm
66253370067
FI-05-018
Blue Fire Fast Cut
Type 27 Grinding Wheel
d
by our
Rec
o
66253370066
FI-05-017
18 $
Gemini XXL Type 27
Grinding Polishing Wheel
s
66253370065
FI-05-016
LIVRAISON
66252841215
FI-05-012
expert
Good, versatile choice for steel
and ferrous metals.
Better choice for stainless steel,
carbon steel, alloys and gray iron.
6 x 1/4 x 7/8
429 $
6 x 1/4 x 7/8
650 $
7 x 1/4 x 7/8
663 $
7 x 1/4 x 7/8
746 $
66252843788
FI-05-019
66252843790
FI-05-020
66252843203
FI-05-023
66252843236
FI-05-024
4-1/2 x 1/4 x 7/8
202 $
5 x 1/4 x 7/8
345 $
6x1x1
66254400253
FI-05-027
593 $
G:60
66254400254
FI-05-028
2131 $
G:80
66254400255
FI-05-029
5 x 7/8
G:40
2463 $
743 $
G:60
ande
mm
d
66254400264
FI-05-031
G:80
66254400265
FI-05-032
LIVRAISON
Valid until DECEMBRER 31th 2015 l P. 3
by our
This offer is only valid while stocks last. Non contractual photographs. -
ILlle
SE
66254400262
FI-05-030
R NOS
PA
LIVRAISON
Coarse 36/46 07660788260
FI-05-053
Medium 60/80 07660788255
FI-05-054
Fine 100/120 07660788250
FI-05-055
509 $
4-1/2 x 7/8
G:40
CON
Coarse 36/46 07660788245
FI-05-050
Medium 60/80 07660788240
FI-05-051
Fine 100/120 07660788235
FI-05-052
Best / highest productivity for
stainless steel, titanium, and super alloys.
S
6 x 3/4 x 1
18
24 $
Rec
o
Coarse 36/46 66252836132
FI-05-047
Medium 60/80 66252836131
FI-05-048
Fine 100/120 66252836133
FI-05-049
5 x 1/4 x 7/8
66252843218
FI-05-026
LIVRAISON
s
6 x 1/2 x 1
429 $
Blaze Quick Trim Flapdisc Type 27 Plastic Plat
Gemini Alundum Bench Wheel
«Brown aluminum oxide:
Good choice for all general-purpose
bench and pedestal applications.
4-1/2 x 1/4 x 7/8
66252843214
FI-05-025
expert
66252843786
FI-05-022
EXPERT
66252843784
FI-05-021
LIVRAISON
4-1/2 x .045 x 7/8
ABRASIFS
Good choice for steel and ferrous metals
as well as specialty applications
in aluminum foundries.
Cutting disc Gemini Rightcut Type 27
Shop Rolls K227
50 Verges
1 po x 50 Yards
1-1/2 po x 50 Yards
G:80
66261109255
FI-05-040
G:80
66261109180
FI-05-033
2263 $
G:100
po66261058721
2185 $
FI-05-034
G:120
66261109170
FI-05-035
G:150
LIVRAISON
66261058720
FI-05-036
G:180
G:100
3197 $
66261058719
FI-05-041
G:120
66261109160
FI-05-037
66261109245
FI-05-042
G:280
G:150
66261109150
FI-05-038
3313 $
66261058717
FI-05-043
G:180
66261109235
FI-05-044
G:280
66261109225
FI-05-045
G:320
G:320
66261109140
FI-05-039
66261109215
FI-05-046
99 $
Dial Caliper 6’’
3202-6
61467
LIVRAISON
Electronic Caliper
798A-6/150
20798
Electronic Caliper
Without Data Output
8’’ / 200mm
265 $
798A-8/200
20799
ABRASIF / MÉTROLOGY
Without Data Output
6’’ / 150mm
199 $
LIVRAISON
LIVRAISON
Electronic Caliper
395 $
Thickness Gage 0.0015 to 0.025
798A-12/300
20800
Without Data Output
8’’ / 200mm
5-66T
50315
Lightweight, knurled steel handle
for a positive grip and easy handling.
125mm (5 in) Length, 14 mm 9/16 in Dia.
LIVRAISON
4150 $
6-18A
50120
Automatic Center Punch
with Adjustable Stroke
Lightweight, knurled steel handle
for a positive grip and easy handling.
125mm (5 in) Length, 16 mm 5/8 in Dia.
LIVRAISON
895 $
OLF 5003
FI-03-139
LIVRAISON
3750 $
7-818
53048
LIVRAISON
Replacement Blades 18 mm (50)
Pack of 50 blades
2595 $
OLF 5016
FI-03-141
MÉTROLOGY / HAND TOOLS
18 mm Heavy-Duty Utility Knives
with Ratchet Lock L-1
LIVRAISON
Automatic Center Punch
with Adjustable Stroke
69 $
LIVRAISON
LIVRAISON
Did you know that......
We have our own
welding center
bandsaw blades,
right here in Québec!
24 At 48 hours we can produce
Until all your blade width 1-1/4 po
With a large inventory of products.
HAND TOOLS
10 blades bought = 1 free
15 blades bought = 2 free
welding center bandsaw blades
11195 $
The real Vise-Grip
10 WR
CRE CTK148MP
FI-04-030
VSG 0502L3
FI-01-076
999 $
LIVRAISON
The real Vise-Grip
5 WR
LUF PHV1316
FI-04-033
335 $
1328 $
VSG 0902L3
FI-01-077
LIVRAISON
LIVRAISON
Ball Bearing
LIVRAISON
Measuring tape
3/4 po x 16 pi
1399 $
The real Vise-Grip
11 R
6203LLBC3
FI-03-016
1999 $
VSG 19
FI-01-077
Bore: 17 mm
Outside Dia.: 40 mm
Width: 12 mm
660 $
6205LLBC3
FI-03-017
Bore: 25 mm
Outside Dia.: 52 mm
Width: 15 mm
LIVRAISON
LIVRAISON
POWER TRANSMISSION / HAND TOOLS
148-piece English/Metric ratchet set
with 1/4”, 3/8” and 1/2” drive
FROM
8
25 $
Safety Glasses OTG Extra
• EX-ON unique adjustable branch system
• Can be worn over your prescription glasses
• The adjustable nose support is more flexible
and comfortable than any other on the market
4A (anti-fog, anti-static, anti-UV, and anti-scratch)
Warrior Safety Glasses
FLEXI-FIT nose support can be pivoted and adjusted
Black / Amber
EP100BA
FI-05-064
Clear
EP750C
FI-05-063
EP100BC
FI-05-065
S
CON
Black / Clear
ILlle
SE
R NOS
PA
Black / Smoke
EP100BS
FI-05-066
EXPERT
EP100MGC
FI-05-067
ande
mm
Rec
o
s
by our
LIVRAISON
Grey / Clear
d
LIVRAISON
Grey / Smoke
EP100MGS
FI-05-068
expert
775 $
FROM
Firebird Safety Glasses
295 $
FROM
Techno Safety Glasses
FLEXI-FIT souple and anti-slip silicone nose support
Universal comfortable rigid nose support
3A (anti-fog, anti-static, and anti-UV)
Amber
Amber
EP800A
FI-05-069
EP850A
FI-05-074
Tinted blue
Tinted blue
Clear
Clear
Mirror
indoor
and outdoor
Mirror
indoor
and outdoor
EP800BT
FI-05-070
EP850BT
FI-05-075
EP800C
FI-05-071
EP800IO
FI-05-072
LIVRAISON
395 $
EP850C
FI-05-076
LIVRAISON
Smoke
EP850IO
FI-05-077
Fumée
EP800S
FI-05-073
EP850S
FI-05-078
FROM
First aid kit
Available for all the provinces
3250 $
FAKONT1BO ONTARIO
FI-02-024
Split Leather Glove
with 3M Thinsulate Lining
ONLY 10 PAIRS
560 $
Large
SEC TGG-512-L
FI-04-059
X-large
SAFETY PRODUCTS
SEC TGG-512-XL
FI-02-020
LIVRAISON
4495 $
LIVRAISON
FAKQU285BP QUEBEC
FI-02-024
Particulate Respirators
8210 N95
1397 $
1680 $
10 respirators per box
MMM 8511
FI-02-025
20 respirators per box
MMM 8210
FI-03-033
LIVRAISON
LIVRAISON
1100 Foam Ear Plugs
1828 $
Nitrile coated Polyester safety gloves
1090 $
Large
Price per box of 10
• Uncorded
• Qty/Box: 200
• Individually packaged for convenience
MMM 1100
FI-03-034
SEC 751185/JQP/Large
FI-05-080
LIVRAISON
RONCO NE5 Nitrile Examination Glove
(5 mil) Green
995 $
SENTRON Nitrile Examination Glove
(6 mil) Black
1195 $
Medium
Medium
975
FI-03-159
962M
FI-03-164
Large
Large
985
FI-03-160
962L
FI-03-165
XL
XL
995
FI-03-161
962XL
FI-03-166
XXL
XXL
995XX
FI-03-162
962XX
FI-03-167
LIVRAISON
SAFETY PRODUCTS
LIVRAISON
LIVRAISON
Particulate Respirators
with valve 8511 N95
M18 FUEL™ LITHIUM-ION 2
Tool Combo Kit
42900 $
The 2797-22 M18 FUEL™ Cordless 2-Tool Combo Kit includes the M18 FUEL™
1/2in Hammer Drill/Driver (2604-20) an M18 FUEL™ 1/4in
Hex Impact Driver (2653-20), M18™ REDLITHIUM™ XC 4.0
Extended Capacity Battery (48-11-1840), M18™ & M12™ Multi-Voltage
Charger (48-59-1812) and Carrying Case
Lithium-Ion standards.
2797-22
FI-03-006
LIVRAISON
M18 FUEL™ 1/2in Hammer
Drill/Driver Kit
33900 $
HORS SerIE
The M18 FUEL™ Hammer Drill/Driver is the most powerful 18-volt cordless
hammer drill/driver in its class.
Kit contains: M18 FUEL™ 1/2in Hammer Drill/Driver (2604-20),
M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840),
M18™ & M12™ Multi-Voltage Charger (48-59-1812),
Carrying Case.
Peak Torque 725 in-lbs
2604-22
FI-03-007
LIVRAISON
M18 FUEL™ LITHIUM-ION 4
-Tool Combo Kit
69999 $
HORS SerIE
Kit contains : M18 FUEL™ 1/2in Hammer Drill/Driver (2604-20),
M18 FUEL™ 1/4in Hex Impact Driver (2653-20),
M18 FUEL™ SAWZALL® Reciprocating Saw (2720-20),
M18™ LED Work Light (2735-20), M18™ REDLITHIUM™ XC 4.0
Extended Capacity Battery Pack (48-11-1840), M18™
& M12™ Multi-Voltage Charger (48-59-1812), Belt Clip,
Contractor Bag, Reciprocating Blade
2796-24
FI-03-009
LIVRAISON
M18 FUEL™ 1/4in Hex Impact
Driver Kit
33500 $
LIVRAISON
M18 FUEL™ 1/2in High Torque Impact
Wrench with Friction Ring Kit
46200 $
HORS SerIE
The M18 FUEL™ 1/2in High Torque Impact Wrench with Friction Ring Kit
features the most powerful cordless wrench in its class, delivering up to
700 ft-lbs of maximum fastening torque, 1,100 ft-lbs of nut-busting
torque and up to 2X more runtime.
What’s Included : M18 FUEL™ 1/2in High Torque Impact Wrench with Friction
Ring (2763-20), M18™ REDLITHIUM ™ XC 4.0 Extended Capacity
Battery Pack (48-11-1840), M18™ & M12™ Multi-Voltage Charger
(48-59-1812), Carrying Case
Torque: 100 ft-lbs (Mode 1) and 700 ft-lbs (Mode 2)
2763-22
FI-03-010
LIVRAISON
1/2in Hammer Drill
12900 $
HORS SerIE
LIVRAISON
The most powerful single-speed hammer drill on the market,
with up to 2X more durability.
This practical 8-amp, ½in dual-mode Hammer Drill offers power and versatility
for a variety of tough jobs, with an impressive 0-2,800 RPMs and 0-48.000 BPMs.
Superior engineering, an all-metal gear case and a heavy-duty metal chuck make this twice
as durable as the leading competitor while maintaining outstanding performance.
The compact 11.5in profile lets you work in tight spaces, and the two modes accommodate
drilling in wood, steel and plastic or hammer drilling in concrete.
What’s Included : 1/2in
Hammer Drill (5376-20), Side Handle
5376-20
FI-03-011
Kit contains: (1) M18 FUEL™ 1/4in Hex Impact Driver (2653-20),
M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840),
M18™& M12™ Multi-Voltage Charger (48-59-1812), Belt Clip,
Carrying Case. Peak Torque
1,600 in-lbs
2653-22
FI-03-008
CON
S
Rec
o
s
expert
110V, 14 PPM, 10’ lifting
L1A14
FI-05-081
ande
mm
by our
Electric chain hoist 0.5t
ELECTRIC HOIST
d
167527 $
VULCAN ELECTRIC PRODUCTS
EXPERT
1
ILlle
SE
R NOS
PA
Electric chain hoist
1690 $
Electric chain hoist 1 t
L2A07
FI-05-082
187980 $
L2F14
FI-05-083
1760
20 $
L2V14
FI-05-084
222993 $
Electric chain hoist 1,5 t
LIFTING AND HANDLING
L3F13
FI-05-085
215973 $
Two year warranTy
Large selection of lifting speeds
Fix or swivel suspension mount
Low headroom lug
Chain container
Special humidity/acidity
motor treatment
Push-button control
TEFC (totally enclosed fan cooled)
motor for increased working time
and motor protection
Great degree of parts
interchangeability (optional)
L4V15
FI-05-086
2340 $
L6V15
FI-05-087
roBUST ConSTrUCTIon
-
LIVRAISON
4 à 5 jours
HOIST PALAN
The built-in safety
is provided by the double-braking
system: an electro mechanical disc brake and a
Price displayed for lifting a length of 10 ‘. For a different length ofunidirectional
lifting, contactdouble
us.
worm gear drive. This non
Electric trolley and winch available. Vulcan hoist is the only Canadian
manufacturer
hoists,
reversible worm gearofdrive
provides positive load-braking
trolleys and electric winches. Robust, reliable and custom-made since
1947.loads to be lowered only under motor power.
permitting
The parts of this transmission are made of heat-treated
and
gearsphotographs.
are made of a special aluminum
P. 12 l Valid until DECEMBRER 31th 2015 - This offer is only valid while steel,
stocks last.
Nonthe
contractual
bronze alloy offering high resistance to wear. The entire
transmission case is sealed in high quality oil, ensuring
optimal lubrication of all components.
Nova gear trolley Nova
Nova push trolley
0.5t, 10’ handbag chain
Flange width : 2-1/2 à 6 po
Headroom : 4-7/16 po»
NGT0.5T-10 FI-05-108
147 $
194
Headroom : 5-1/8 po»
NGT01T-10 FI-05-109
1.5t, 10’ handbag chain
210 $
Flange width : 3-1/8 à 6-5/8 po
Headroom : 5-3/4 po
NGT01.5T-10 FI-05-110
226 $
Headroom : 6 po
NGT02T-10 FI-05-111
3t, 10’ handbag chain
Headroom : 7-1/4 po
NGT03T-10 FI-05-112
Headroom : 8-5/8 po
NGT05T-10 FI-05-113
10t, 10’ de handbag chain
459
$
772 $
Headroom : 10-3/4 po
NGT10T-10 FI-05-114
Nova Ratchet Puller
4420 $
Headroom : 5-1/8 po
NPT01T FI-05-102
Headroom : 8-5/8 po
NPT05T FI-05-106
6045 $
NPT10T FI-05-107
8190 $
648 $
1t
Handle : 11-7/8 po, 5’ lift
113 $
2t
137 $
Headroom : 15 po
174
NPU0.75T-05
FI-05-097
NPU01.5T-05
FI-05-098
$
Headroom : 19 po
259 $
Handle : 16-1/2 po, 5’
432 $
NPU03T-05
FI-05-099
lift
NPU06T-05
FI-05-100
55 $
Flange width : 1.75 à 7.5 po
Headroom : 4.87 à 5.5 po
NBC01T FI-05-115
Nova universal clamp
58 $
NBC02T FI-05-116
3t
97 $
Flange width : 2 à 12 po
NBC03T FI-05-117
5t
108 $
Flange width : 2 à 12 po
NBC05T FI-05-118
LIVRAISON
10t
NBC10T FI-05-119
235 $
HOIST - PALAN
Nova manual hoist
0.5t, Lift height : 10 ft
0.8t
Opening: 0 à 0.6 po
Eye Dia. :1.19 po
NUC0,8T FI-05-120
1t
Eye Dia. : 1.90 po
NUC1T FI-05-121
62 $
88 $
2t
138 $
3t
207 $
Eye Dia. : 2.37 po
NUC2T FI-05-122
LIVRAISON
392 $
10t
1.5t
Headroom : 5-3/4 po
NPT01.5T FI-05-103
240 $
5t
1t
80 $
NPU0.5T-05
FI-05-096
HOIST - PALAN
Headroom : 7-1/2 po
NPT03T FI-05-105
po
Headroom : 10-1/4
NPU0.25T-05
FI-05-095
LIVRAISON
NPT0.5T FI-05-101
Nova beam clamp
Displayed price for lifting a length of 10 ‘.
Contact us for a different length of lifting.
Lifting height: 5 pi
3t
0.5t
Eye Dia. : 2.57
NUC3T FI-05-123
HOIST - PALAN
Many other products available. Services offered :
• Location • Test and certification • Repair & Maintenance
LIVRAISON
HOIST - PALAN
Valid until
NB0.5T-10
FI-05-088
1t, Lift height : 10 ft
NB01T-10
FI-05-089
1.5t, Lift height : 10 ft
NB01.5T-10
FI-05-090
NB02T-10
FI-05-091
NB03T-10
FI-05-092
5t Lift height : 10 ft
NB05T-10
FI-05-093
NB10T-10
FI-05-094
102 $
115 $
146 $
165 $
203 $
307 $
658 $
DECEMBRER 31th 2015 l P. 13
LIFTING AND HANDLING
HOIST - PALAN
324
141 $
LIVRAISON
LIVRAISON
$
Headroom : 6 po
NPT02T FI-05-104
HOIST - PALAN
2t
$
1t, 10’ de handbag chain
HOW TO SELECT THE PROPER HOSE REEL ?
DID YOU KNOW?
USE A HOSE REEL, WHENEVER
POSSIBLE.
THEY MAKE HOSE HANDLING
MORE EFFICIENT AND SAFER:
Hose reels
Hose reels
Hose reels
Hose reels
reduce wear on hoses
position hoses where the workers need them
improve efficiency
reduce the risk of accidents
6 STEPS IN ORDER TO SELECT THE PROPER HOSE REEL FOR YOUR APPLICATION
STEP
1
RETRACTION METHOD
• Automatic rewind - Spring driven requiring no power source. Operator guides the
hose as it retracts itself around the drum. Automatic rewind easily wraps, stores
and protects hoses
• Manual rewind - Hand crank. Operator must manually crank the reel and guide
the hose evenly as it wraps around the drum
STEP
2
HOSE REEL CONSTRUCTION
The environment in which the hose reel will be used is a critical element in selection
the proper hose reel.
• Steel open or enclosed models. Enclosed models shield out the elements to protect
and extend the life of the reel, the hose and the components inside
• Composite enclosed models for lighter weight and wash down environments
STEP
3
TYPE OF HOSE
• Select the right hose type for the application, based on the environment, conditions
and the way in which the hose is to be used
• Consider the maximum pressure (PSI) of the hose
• Consider operating temperature and pressure requirements
4
HOSE DIAMETER
• Select a hose with the larger possible diameter
• Hoses with smaller inside diameters (I.D.) require an increase in compressed air
pressure and thus increase operating costs
STEP
5
HOSE LENGTH
• Keep the hose as short as possible for the application
STEP
FLUID REQUIREMENT
• Will the hose reel be used with compressed air? Water?
ILlle
SE
S
6
CON
• Each unused foot/meter increases pressure drops and costs
R NOS
PA
EXPERT
P. 14 l Valid until DECEMBRER 31th 2015 - This offer is only valid while stocks last. Noncontractual photographs.
ande
mm
d
co
PRODDUITS OF AIR AND WATER
STEP
b
Industrial heavy duty hose reel TOPREEL HD
29785 $
Professional hose reel MAXREEL
3/8 x 50’ x 1/4
(M) NPT Large
3/8 x 50’ x 1/4
(M) NPT Lrg
79.504 FI-05-126
79.334 FI-05-130
24783 $
19690 $
3/8 x 33’ x 1/4
(M) NPT Lrg
1/2 x 50’ x 3/8
(M) NPT XLrg
79.503 FI-05-127
79.336 FI-05-131
11175 $
1/2 x 33’ x 3/8
(M) NPT XLrg
1/4 x 100’ x 1/4
(M) NPT
79.508 FI-05-128
404
18 $
79.040 FI-05-132
LIVRAISON
1/2 x 50’ x 3/8
(M) NPT XLrg
79.509 FI-05-129
Professional compact hose reel
FLEXREEL with Flexhybrid hose
13500 $
3/8’’ dia. x 50’
x 1/4’’ (M) NPT
79.805 FI-05-133
Safety blow gun TOPpro
with reinforced scratchproof nozzle
1690 $
60.315 FI-05-134
LIVRAISON
AIRFLO 300 integrated filter /
regulator 1/4 semi-auto
LIVRAISON
37767 $
LIVRAISON
17221 $
6163 $
51.35 FI-05-135
MAXPRO rubber air hose red
- with rubber guard
3/8’’ dia. x 25’
x 1/4’’ (M) NPT
71.375 FI-05-137
4723 $
3/8’’ dia. x 50’
x 1/4’’ (M) NPT
LIVRAISON
71.379 FI-05-138
TOPQUICK SC Connector
For INDUSTRIAL and ULTRAFLO hoses
Available in 1/4’’, 3/8’’, 1/2’’
LIVRAISON
3115 $
20.847 FI-05-136
LIVRAISON
This offer is only valid while stocks last. Noncontractual photographs. -
2569 $
THE LATEST FROM FICODIS
Your industrial supply distribution company
In a constant concern for performance and quality customer service,
Ficodis is broadening its competencies in the Québec City area with the
acquisition of PIQ, a company specializing in the distribution, design and repair
of hydraulic, mechanical, pneumatic, and electric parts.
SERVICES AND KNOW-HOW
HYDRAULIC
• Distribution of hydraulic parts,
hoses and couplings
• Engineering of hydraulic hoses
• Design and fabrication of power units
• Mobile and industrial hydraulics
• Repair of hydraulic pumps and actuators
MECHANICAL
• Distribution of mechanical parts, bearings
and power transfer devices
• Sale and repair of motor reduction units
• Design and fabrication of mechanical processes
PNEUMATIC
• Distribution of air control and feed
line products
• Repair of pneumatic actuators
• Design and fabrication of automated
pneumatic systems
ELECTRICAL
• Distribution of electrical variators
and motors
• Repair of electric variators and motors
264, Avenue Taniata local 100
Levis, (Québec) G6W 5M6
Tel.: 418 839-5111
www.piecesindustrielles.com
P. 16 l
17745 $
Mono bloc valve
SDM080/1-P(TGW3)/18L/PSA-SAE
FI-05-139
18945 $
Electric motor
1 hp ; 600vac ;
143T
MPC2W
FI-05-143
4 à 5 jours
LIVRAISON
4 à 5 jours
Gerotor motor
Cross over relief valve for motor
72445 $
Variable drive
1 hp ; 600vac
MC LTP B0008-603-4-00 MOVITRAC
FI-05-142
32945 $
Valve de sécurité double pour moteur
720 à 3050 psi
KPDR210A
FI-05-141
LIVRAISON
epair
LIVRAISON
4 à 5 jours
Moteur gerotor
315cc ; 4 boulons
MLHPQ315C4UE
FI-05-140
LIVRAISON
4 à 5 jours
LIVRAISON
4 à 5 jours
Carbide Cutter
For Stainless Steel
CCMT 21.51-UR Grade: T8330
6754227
FI-05-149
629 $
6754228
FI-05-150
6754229
FI-05-151
721 $
6754230
FI-05-152
CNMG 431-NF Grade: T8330
6834650
FI-05-153
857 $
CNMG 432-NF Grade: T8330
6834656
FI-05-154
TNMG 331-N Grade: T8330
6834707
FI-05-155
710 $
TNMG 332-NF Grade: T8330
6834713
FI-05-156
LIVRAISON
TNMG 432-NM Grade: T8330
6754209
FI-05-157
WNMG 432-NF Grade: T8330
6834743
FI-05-158
950 $
LIVRAISON
846 $
CCMT 21.51-FM Grade: T9315
6753709 FI-05-159
6753868 FI-05-160
6753711 FI-05-161
6753767 FI-05-162
CNMG 431-FM Grade: T9315
6753820 FI-05-163
CNMG 432-M Grade: T9325
6753778 FI-05-164
TNMG 331-M Grade: T9325
6754107 FI-05-165
6753847 FI-05-166
6753850 FI-05-167
WNMG 432-M Grade: T9325
6753859 FI-05-168
DCMT 21.51-FM Grade: T9315
6754056 FI-05-169
DCMT 32.52-FM Grade: T9325
6753785 FI-05-170
TCMT 21.51-FM Grade: T9315
6754076 FI-05-171
6754101 FI-05-172
6753844 FI-05-173
CCGT 32.52F-AL Grade: HF7
6751799 FI-05-174
TCGT 32.52F-AL Grade: HF7
6751804 FI-05-175
629 $
629 $
721 $
721 $
857 $
857 $
710 $
710 $
950 $
846 $
702 $
946 $
685 $
867 $
867 $
957 $
629 $
Carbide Cutter
For Stainless Steel
FROM
Turning Cutter Holder
MP-X solid carbide high performance drill 3xD
9020 $
XLCFN 2602 J 3.00 - XLCFN 2
6754227 FI-05-176
LIVRAISON
9400 $
XLCFN 3202 M 3.00 - XLCFN 3
6754228 FI-05-177
KV 5X70
6754229 FI-05-178
• 140 deg point • Multi-application • Short length
• Reinforced Shank
R458 FI-05-146
LIVRAISON
332 $
À PARTIR DE
4655 $
Hydra high performance drill 3xD HSS
H853 FI-05-144
• 140 deg point • Cylindrical shank
• Flat for multi-purpose tool holding
LIVRAISON
FROM
Hydra high performance drill 5xD HSS
• 140 deg point • Cylindrical shank
• Flat for multi-purpose tool holding»
28850 $
H855 FI-05-145
LIVRAISON
FROM
Benefits :
Hydra carbide drill head
• High productivity in a wide range of materials, including
carbon, carbon steel, stainless steel, nickel and cast iron.
• Two types of headers are available. The head was R960
developed specifically for performance in maxumum
stainless steel and cast iron. The R950 is recommended for head
steel.
• Quick and easy change of heads with minimal
production interruption. The heads can be changed
without removing the bit from the machine.
R950 FI-05-147
• 40 deg point
• Special Ti-phon coating for longer tool life
• For stainless steel, cast iron
& heat resistant materials»
FROM
Hydra carbide drill head
• The attachment of the drill head ensures best tool rigidity
and better tolerance of the hole.
• The chuck of the drill is similar to several tool holders.
• The discharge of the chips and the life of the tool is optimized
through internal lubrication and tool and lubricant pressure.
A choice of drilling depths, 3x diameter and 5 x diameter.
Drill set
Dormer tools taper length
drill bit sets 1/1
574317
1-60, Dormer tools taper
length drill bit sets A097
7350 $
R960 FI-05-148
• 40 deg point
• Special Ti-phon coating for longer tool life
• For stainless steel, cast iron
& heat resistant materials»
LIVRAISON
«»»Master»» drill set
with 3 flat shanks 29 pieces
DOR 0574324
FI-04-078
DOR 0574317
FI-01-034
7350 $
LIVRAISON
• High constant performance even after several
head changes.
CUTTING TOOLS
5150 $
9749 $
DOR MASTER
FI-02-203
11100 $
105
00 $
LIVRAISON
LIVRAISON
Ensemble de foret 29 pièces
135 degrés
5995 $
1/16 - 1/2 au 64e
Acier HSS
fini BLACK & GOLD’
VEGA 908
LUBRIFIANT POUR CHAINES
1492 $
Aerosol can sold individually or in packs of 12
• 650 ml • 21,66 fl.oz
VEGA 908
FI-05-185
SOW 105380
FI-03-091
DESCRIPTION
Sans étiquetage de sécurité. A base de matières premières
renouvelables, utilisé pour la
lubrification en ambiance humide. Onctueux et adhérent avec
de bonnes qualités anti usure. Fort pouvoir de pénétration
pour une répartition homogène du lubrifiant jusqu’au centre
des axes de chaînes.
UTILISATION
Pour chaînes de convoyeurs, chaînes de trempe, chaînes de
fours peinture ou sérigraphie.
Pour chaînes de transmission en industrie de la tapisserie,
teinturerie,…
LIVRAISON
VG CUT 77
WATER BASED LUBRICANT DRILLING - TAPPING
LIVRAISON
1714 $
RIE
HORS
KL SE
9H
1038 $
VOV FREE DEGREASING AGENT
Spray bottle sold individually or in packs of 12
• AFSSA • Temp. : 0°C / + 100°C • 200 L • 20 L / 5 L • 750 ml • 25 fl.oz
VG CUT 77
FI-05-186
KL 9 H
FI-05-187
DESCRIPTION
Water based fluid made of vegetal polymer.
Non flammable, VOC free and biodegradable,
no safety restrictions Can be used on any materials.
DESCRIPTION
Water-based cleaner from sustainable materials.
Free from VOC, petrol-based solvent,
and glycols. Comply with the AFSSA nomr n° 2007-SA-0028.
UTILISATION
Drilling, tapping.
UTILISATION
KL 90 easily eliminates grease,
oil, sludge and temporary oil
or wax protection.
LIVRAISON
S
LIVRAISON
ILlle
SE
R NOS
PA
CON
• 650 ml • 21,66 fl.oz
EXPERT
Rec
o
SERI
5 E
HORSTOP
s
5 FUNCTIONS: LUBRICANT – PENETRATING OIL ANTICORROSION – WATER REPELLENT - DEOXIDISING
• PROTECTION UNDER SHELTER : 1 YEAR
• EXTÉRIEUR : 6 MOIS • 650 ml • 21,66 fl.oz
TOP 5
FI-05-189
DESCRIPTION
MULTI TP is high performance and multi purpose grease.
The thickener gives to MULTI TP a good
mechanical stability at work and during storage.
The product has extreme pressure additives
to reduce wear under high load
and to give protection against corrosion
for all type of materials
MULTI TP is adhesive on all metals.
UTILISATION
For all type of bearings, joints, pins, swivels,
racks, agricultural machinery, cement-plants,
brickyards, sugar factories, quarries, mines,
road transport.
DESCRIPTION
5 - Function. Water repellent and lubrication fluid.
In addition to its protection and lubrication properties,
it also has water repellent characteristics.
UTILISATION
Storage of machined or cut-out parts. Protection
of moulds and foundry and glass-making tools.
Protection of sporting guns. Lubrication of chains
in moist and oxidising conditions.
Greasing of all locks, hinges, etc.
LIVRAISON
HORS SERIE
LIVRAISON
RIE until DECEMBRER 31th 2015 l P. 19
HORS SEValid
WORKSHOP EQUIPMENT
GRAISSE MULTI TP
FI-05-188
881 $
expert
Can of 16 kg sold individually
• Temp. : -20°C / +140°C • GRADE NLGI 2 • 180 Kg • 50 Kg • 1 Kg • 400 g • 16 Kg / 5 L
by our
MULTI PURPOSE GREASE NLGI2
699 $
d
SERIE Multi TP
HORSGraisse
ande
mm
950 $
Gear locker with 2 doors
490 $
6 door locker
12’’ wide x 18’’ deep x 72’’ high
12’’ wide x 18’’ deep x 72’’ high
9-3624-PLD-P
FI-05-124
9-3624-PLD-P
FI-05-125
• Engineered for police stations,
firehouses, military bases and athletic team organizations
who demand high performance equipment storage solutions.
• Designed to accommodate the storage of a wide variety
of gear and apparel while allowing maximum ventilation.
LIVRAISON
LIVRAISON
LIVRAISON LIVRAISON
4 à 5 jours
LIVRAISON
SCOTT® High Capacity Hard Roll
Towels #02000, white
LIVRAISON 1073 $
5-Gallon Spill Kits - Universal
5995 $
LIVRAISON 8 x 950’ / 20.3 cm x 289.5 m, core 1,75
6 in a box
SEI160
FI-03-154
EMB 2900505
FI-03-119
LIVRAISON
LIVRAISON
WYPALL X60 Wipers
831 $
9.1 Width x 16.8 Length, White (126/box)
Caisse de 10 boîtes
EMB 2905033
FI-03-120
10-Gallon Eco-Friendly Truck Spill Kits
- Universal
LIVRAISON
WORKSHOP EQUIPMENT
SEI177
FI-03-153
LIVRAISON
Feuilles absorbantes
économiques - Huile seulement
4719 $
Dimensions : 15 lo x 17 la
Paquet de 100 feuilles
SEH942
FI-03-123
LIVRAISON
11995 $
QuickTite instant adhesive gel
for general use
595 $
Fast acting corrosion
Freeze & Release
0.14oz. bottle
13.52oz. Aerosol Can
39202
FI-05-179
996456
FI-05-180
LIVRAISON
1395 $
LIVRAISON
Metal Magic Steel epoxy
in stick form
1595 $
545™ Hydraulic/
Pneumatic purple thread sealant
4oz. Tube
50mL Bottle
98853
FI-05-181
54531
FI-05-182
LIVRAISON
Superflex RTV
silicone adhesive sealant
1095 $
Maximum Strength Headliner Adhesive
50mL tube
1675oz. Aerosol Can
193999
FI-05-182
37312
FI-05-185
À PARTIR DE
1395 $
LIVRAISON
pour l’achat de 12
Superflex RTV
silicone adhesive sealant
2250 $
Prix unitaire
1695 $
300mL tube
Clear
193999 FI-05-183
LIVRAISON
Tube de 300mL
White
193999 FI-05-184
ADHESIVE PRODUCTS - GREACE AND AEROSOLS
LIVRAISON
3695 $
Installation & Maintenance Tools
217 $
TT OPTICAL «frequency tension tester»
Contents:
• 4 units - Optikrik, Models: 0, I, II, III
• 1 V-belt and pulley groove gauge set
• 1 measuring tape (3 m)
• 1 ballpoint pen with silver refill
• Flashlight packed in a sturdy plastic box
995 $
The optibelt TT OPTICAL frequency tension tester uses vibration frequency
as a means of measuring belt tension accurately.
Range of measurement :
5-500 Hz
TT-Optical
FI-04-075
LIVRAISON
LIVRAISON
Laser Pointer II
549 $
The Optibelt laser pointer II facilitates the alignment of belt drives. The belt
pulleys are aligned to each other via the front and/or the lateral surfaces.
This professional handling will improve the operation of the belt and prolong its
service life considerably. Technical data: Laser: class ll M, Output power: ≤ 5 mW,
Wavelength: 635 nm, Measure < 0.5 mrad, accuracy: parallelism to magnet face,
Case: brass, nickeled, Power: 1.5 V AA-battery.
Laser Pointer II
FI-03-021
Optibelt HVAC POWER
S
ILlle
SE
d
while at the same time
cutting costs by up to 35 %.
expert
talking about :
up to 50 % more performance
s
that are really worth
by our
produces results
Optibelt HVAC POWER
ande
mm
Rec
o
The next
generation of
RED POWER 3
V-belts and kraftbands
R NOS
PA
CON
LIVRAISON
EXPERT
Service Box
FI-04-074
is designed to transmit
the power of a raw edge belt
without the issue of pulley groove
wear and belt noise.
In addition, the belt construction
practically eliminates belt stretch
and will operate
in extreme temperatures
(- 40°C / F to 100°C / 212° F).
Just ask for it!
Industrial Heavy-Duty Fibreglass
Stepladders (6900 Series)
Height: 6’, Highest Standing
Height: 45’’
6906
FI-03-149
6908
FI-03-150
14846 $
Height: 8’, Highest Standing
Height: 67’’
11856 $
LIVRAISON
NOTES
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
......................................................................................................
465 Saint-Jean, bureau 708, Montréal, H2Y 2R6
Tel : 514-360-4007
info@ficodis.ca / ficodis.ca
33, St-Jude Sud, Granby, J2J 2N1
Tel : 1 800-363-5688
info@delpar.qc.ca / delpar.co
1225, Marie-Victorin, Sorel-Tracy, J3R 1L8
Tel : 1 800-268-0431
info@vlindustriel.com / vlindustriel.com
ENTREPRISE DU GROUPE
1225, Marie-Victorin, Sorel-Tracy, J3R 1L8
Tel : 514-360-7770
info@versionb.ca / versionb.ca
2420 A, rue Letendre, Drummondville, J2C 7E9
Tel : 819-850-0555
info@dfidrummond.com / dfidrummond.com
830, industrial Avenue, Unit 1, Ottawa, K1G 4B8
Tel : 877-731-6161
info@indsol.ca / indsol.ca
264, Avenue Taniata local 100 Levis, G6W 5M6
Tel : 418 839-5111
www.piecesindustrielles.com

The Selection

Transcription

Similar documents

Koller Auktionen AG - The