Stock Program - THG USA website

Transcription

Stock Program
Stock Program
THG USA 6601 Lyons Road - Coconut Creek - FL 33073 - USA
Tel: 954 425 8225 - Fax: 954 425 8301 - Email: info@thgusa.com - www.thgusa.com
Stock Program
Summary
Introduction4
THG Environmental Policy
5
Project references
6
Art Déco
11
Tradition with lever handles
23
Beluga with lever handles
35
Basin12
Bath & Shower
14
Accessories20
Basin24
Bath & Shower
26
Accessories32
Basin36
Bath & Shower
38
Accessories44
Pure47
Basin48
Bath & Shower
50
Accessories56
Faubourg with lever handles
59
A unique Know-How
70
THG Warranty
71
Basin60
Bath & Shower
62
Accessories68
3
Introduction
Solid brass
Proof of quality, efficiency and longevity, all our
fittings are made in brass.
Quick-ship delivery
In order to improve our Customer Service
we have noted the concern with regard
to improving delivery times without
compromising the quality of our products.
US code compliance
Our products sold in the US market are made in compliance
with the requirements of applicable standards. They are
regularly tested by independent laboratories so as to
guarantee our customers ongoing compliance. THG works
with the NSF and IAPMO labs to ensure compliance with
standards NSF 61s9, ASME A112.18.1-2005/CSA B125.1-05
and CA law AB 1953.
Standardization characteristics
To guarantee that our products comply with applicable US
standards, they are tested for a number of criteria: water
flow, comfort, wear and compliance in terms of drinking
water distribution.
Water flow
This is the maximum flow rate for running water. This
characteristic is measured by calculating the water flow
per minute. This measurement is expressed in gallons per
minute (gpm). For washbasin and sink faucets, the default
standard corresponds to 2.2 gpm and for showerheads,
it is 2.5 gpm. On request, THG can also supply products
compliant with water saving standards as defined by the
WaterSense label which calls for a maximum flow rate of
1.5 gpm.
Compliance in terms of drinking water distribution
So as to comply with CA law AB 1953 applicable in the State
of California, which regulates the use of lead, we use leadfree brass to make our faucets destined for the Californian
market. To further our quest for compliance, we have
decided to eliminate the use of lead in all of our faucets
destined for the US market.
So as to guarantee our customers that our products are made
in line with applicable standards, we have set up a Department
within THG to ensure ongoing compliance with these standards.
Finishing only in chrome or nickel
All the products illustrated in this catalogue are offered in chrome (A02)
or nickel (B01), except for Pure range only available in chrome. All the lines
shown in this brochure are available in other finishes-18 standard colors.
For any further information regarding our various finishes, please have a
look at the general THG catalogue. However, please note that because of the
variety of its plating finishes, the manufacturing leadtime may on occasions
be extended by a few weeks.
4
A02
Polished
Chrome
B01
Polished
Nickel
THG Environmental Policy
Bath & Art de Vivre
Fashion, Craftsmanship, Innovation and
Responsible Manufacturing.
THG is world renown for creating some
of the most exquisite examples of bathroom
fixtures and hardware ever imagined. Our passion
for meticulously crafting the finest materials into
works of art carries over into everything we do.
Bath & Art de Vivre, “art to live,” has deep meaning and
conviction beyond the end product that we produce; we
consider it our responsibility to take action in order to reduce
the environmental impact our activities might have.
Environmental Management System:
Over 10 years ago, THG began the processes of updating
our manufacturing facilities and management guidelines while
implementing and applying the following environmental policies:
- Observe prevailing environmental laws
- Stay focused on the action of reducing the environmental
impact of the company’s activities in everything that we do
- Maintain an ecological approach to the conception of new
product development and expansion
Our factory and facilities reflect
THG’s commitment today
and well into the future:
- New facility adding 35,000 sq. ft. constructed in accordance
with RT 2500 standards (Thermal Regulation) utilizing
architectural designs, engineering and materials to minimize
energy consumption.
- High efficiency lighting installed in 48,000 sq. ft. of facility
and power grid management system allows for a reduction
of more than 50 percent of electric consumption via Gradual
Power Supply Technology.
- Solar Energy and a 19,000 sq.ft. photovoltaic
plant add to THG’s list of sustainable
development actions taken to harness
renewable resources. This is achieved by
taking advantage of the building’s elongated
roof surfaces. The production of electricity is
achieved in a silent, autonomous manner that is
greenhouse-gas-emission free and non-polluting.
THG has entered into a partnership agreement on
energy consumption reduction with ADEME, an agency for
sustainable energy and environmental development located
in France.
- Reclamation and Non-Hazardous Industrial Waste is achieved
with the latest techniques and treatment procedures such
as: the plating of finishes with zero water waste; relying on
a drastic reduction of chemical product consumption while
maximizing water recycling. (This process reduces water
consumption by 80 percent). Air quality is maintained by
capturing carbon emissions and “cleaning” of emitted gases
created during manufacturing. In addition, once industrial
water is used, it is collected and treated in our own plant and
recycled back into the closed loop circulation system.
- Recycling is achieved across all levels of operation at THG. In
the manufacturing process, recycling is done in conjunction
with our metal suppliers. Brass is the quintessential recyclable
material and allows a 100 percent full cycle program. We
work extremely close with our vendors to be sure that the
raw material that we are working with meets our stringent
standards in terms of the perfect alloy compositions required
for our foundry and machining. THG also recycles all of its
other metals, including inox, aluminum, copper and others.
A full recycling program is in place throughout all facilities
to include generalized waste sorting of consumables,
plastics, cardboard, and organic matter. Waste collected is
transformed into other products through a third party.
- THG brings luxury, quality and peace of mind to our clients.
In doing so, we use lead-free brass in all of our products.
Water conservation is a standard amenity on all THG lav
faucets, shower heads and handshowers. These products are
equipped with code approved water restrictors that do not
hinder their performance.
5
Project references
1
2
3
4
5
1. Sofitel (Chicago) - 2. Bellagio (Las Vegas) - 3. Wynn (Las Vegas) - 4. Pan Gu (Beijing) - 5. Samsung Tower (Seoul)
6
Project references
Prestigious references everywhere in the world...
1
2
1. Burj Al Arab (Dubaï) - 2. Emirates Palace (Abu Dhabi)
7
1 2
5 6
3 4
1. Monte Carlo Bay (Monaco) - 2. Four Seasons (Firenze)
3. Le Scribe (Paris) - 4. Le Ritz (Paris) - 5. Le Fouquet’s (Paris) - 6. Intercontinental (Paris)
8
Project references
1 2
3 4
Everywhere where beauty
and refinement combine daily,
THG provide people with the keys
of a rediscovered paradise.
1. Dukes Hotel (London) - 2. Amnesia - 3. Squall - 4. SS Delphine
9
Art Déco
11
Art Déco
12
Basin
References available in chrome (A02) and nickel (B01)
Art Déco
2 1/4
1
O 2 3/8
3/4"
3/4"
3/4"
3 1/4
3 3/8
Basin
5 1/2
O 2 3/8
1/2"
1/2"
0°
11 3/4
hose length
O 2 1/8
O 1 1/4
Ref. A54.151/US
Widespread lavatory
set with drain
3/4"
O 2 3/8
3/4"
3/4"
1/2"
5 5/8
4 1/4
3 3/8
4 1/2
1"1/4
5 7/8
O 2 3/8
1/2"
hose length
11 3/4
flexible Lg
schlauch länge
flexo lg
O 2 1/8
12°
O 1 1/4
Ref. A54.152/US
Widespread lavatory set,
high spout with drain
1"1/4
4 3/8
2
4 3/8
2 1/2
O 2 1/2
9
3 3/8
O 2 3/8
Ref. A54.20SGAUS
Wall mounted lavatory
set less drain with
super goliath spout
13
Art Déco
Bath & Shower
O 2 3/8
1"
2 1 5/8
O 2 3/8
3/4"
1"
3 7/8
3 3/8
5 5/8
8 5/8
O 2 3/4
1"
3/4"NPT
3/4"NPT
O 1 1/8
Ref. A54.112BSGUS
Roman tub set with
divertor spout and
handshower, ¾˝
deluge valves
2
O 2 1/2
8 3/8
3/4" NPTF
Ref. A54.22SG/US
Wall mounted
roman tub spout
1 1/2
2 1/2
3 Maxi
3 3/8
M 24 x 100
O 2 3/8
9
5/8 mini
Ref. A54.30B/C
Trim for cold wall
valve without head
2 1/2
3 Maxi
3 3/8
M 24 x 100
O 2 3/8
5/8 mini
14
Ref. A54.30B/H
Trim for hot wall
valve without head
Art Déco
Bath & Shower
3 Maxi
3 3/8
M 24 x 100
O 2 3/8
2 1/2
5/8 mini
Ref. A54.30B/N
Neutral trim for wall
valve without head
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30CUSA
½˝ wall valve ceramic
cartridge without trim
1/2" NPTF
2 7/8
3/4"
NPTF
3/4"
M24x100
2 7/8
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
Ref. G00.32CUSA
¾˝ wall valve ceramic
cartridge without trim
15
Art Déco
Bath & Shower
O 6 1/8
5/8
3 1/2
Ref. A54.320B
Trim for pressure
balance valve
3 7/8
3 3/8
1/2 NPT
1/2 NPT
3
4 1/8
1/2 NPT
1/2 NPT
5
O 2 1/4
4
6 1/8
16
Ref. G00.320A
½˝ pressure balance valve
Art Déco
Bath & Shower
4 3/4
7 7/8
R
15
/8
1/4
2 1/2
3 5/8
O 2 5/8
Ref. A54.5100B
Trim for Thg thermostat,
Refs. 5100A/US
& 5200A/US
3 1/8
4 3/8
2 3/4
1
1/2" NPTF
1/2" NPTF
5 7/8
1/2" NPTF
Ref. G00.5100A/US
½˝ thg thermostat 11 gpm
including wax cartridge and
flushing cap without trim
1/2" NPTF
5 7/8
3 1/8
2 3/4
1
3/4" NPTF
3/4"
NPTF
Ref. G00.5200A/US
¾˝ thg thermostat
15 gpm including wax
cartridge and flushing
cap without trim
3/4"
NPTF
2 1/4
2 1/8
3/4" NPTF
3 1/8
O2
6 1/2
O1
O 2 3/8
O 5/8
O 2 3/8
1/2"
NPTF
2 5/8
Lg: 59
Ref. A54.52/US
Shower set
with handshower
and fixed hook
17
Art Déco
Bath & Shower
O1
4 7/8
O 3/4
1 1/2
O 2 3/8
1 7/8
1/2" NPTF
1/2"
45°
Ref. A54.82/US
Horizontal shower arm,
45° bend, 4 ⅞˝ long
1
10
45°
O 2 3/8
O 3/4
O1
1 1/8
1/2" NPTF
1/2"
Ref. A54.84/US
45° bend, 10˝ long
O 2 3/8
1
14
O 3/4
O1
2 3/8
1/2" NPTF
1/2"
Ref. A54.84BC/US
2 3/8
6 3/4
1 1/2
1/2"
NPTF
1/2"
18
Ref. G00.85/US
Cast shower arm, 6 ¾˝ long
Art Déco
O 4 3/4
Bath & Shower
3 5/8
1/2
Ref. G00.688/US
Shower head, small
can, 4 ⅞˝ diameter
3 5/8
1/2"
Ref. G00.286/US
Shower head,
7 ⅞˝ diameter
O 7 7/8
1 3/4
4 1/4
1/2"
Ref. G00.288L/US
Shower head, adjustable,
2 ¾˝ diameter with hard
water protection
O 2 3/8
O 2 3/4
O1
2 3/8
1
1/2" NPTF
O 1 1/8
Ref. A54.290/BUS
Body spray ½˝ with
hard water protection
19
Art Déco
Accessories
3
1 3/4
Ref. A54.504N
Towel ring, 7 ⅛˝ diameter
O 7 1/8
3 3/4
3 1/8
O1
1 3/4
25 3/4
2 1/2
Ref. A54.526/60
Towel bar, 25 ¾˝ long
5 7/8
10 1/4
9
77
/8
2
Ref. G00.2626
Soap basket, wall mounted
20
Ref. G00.3626
Large corner soap
basket, wall mounted
Art Déco
1
Accessories
1 3/4
3 1/8
Ref. A54.517
Robe hook
7 3/4
3 1/8
1 3/4
5
Ref. A54.543M
Paper roll holder
21
Tr adition
with le ver handles
23
24
Basin
3/4"
O 2 3/8
3/4"
1/2"
O 2 3/8
1
3 1/4
3 3/8
3/4"
2 1/4
Basin
5 1/2
1/2"
0°
11 3/4
hose length
O 2 1/8
O 1 1/4
Ref. A58.151/US
Widespread lavatory
set with drain
3/4"
O 2 3/8
3/4"
O 2 3/8
5 5/8
4 1/4
4 1/2
3 3/8
1"1/4
5 7/8
1/2"
11 3/4
hose length
O 2 1/8
12°
O 1 1/4
Ref. A58.152/US
Widespread lavatory set,
high spout with drain
1"1/4
4 3/8
2
4 3/8
2 7/8
O 2 3/8
9
3 3/8
O 2 1/2
Ref. A58.20SGAUS
set less drain with
super goliath spout
25
Bath & Shower
3 3/4
5 5/8
3 3/8
O 2 3/8
3/4"
1"
O 2 3/4
O 2 3/8
1"
1"
1 3/41 5/8
8 5/8
2 7/8
3/4"NPT
3/4"NPT
O 1 1/8
Ref. A58.112BSGUS
Roman tub set with
divertor spout and
handshower, ¾˝
deluge valves
2
O 2 1/2
8 3/8
3/4" NPTF
Ref. A58.22SG/US
Wall mounted
roman tub spout
1 1/2
2 7/8
3 Maxi
3 3/8
M 24 x 100
2 1/4
9
5/8 mini
Ref. A58.30B
valve without head
26
Bath & Shower
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30CUSA
cartridge for cold
without trim
1/2" NPTF
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30HUSA
cartridge for hot
without trim
1/2" NPTF
2 7/8
3/4"
NPTF
M24x100
2 7/8
3/4"
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
Ref. G00.32CUSA
cartridge for cold
without trim
2 7/8
3/4"
NPTF
3/4"
M24x100
2 7/8
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
Ref. G00.32HUSA
cartridge for hot
without trim
27
Bath & Shower
O 6 1/8
5/8
3 1/2
Ref. A58.320B
Trim for pressure
balance valve
3 7/8
3 3/8
1/2 NPT
1/2 NPT
3
4 1/8
1/2 NPT
1/2 NPT
5
O 2 1/4
4
6 1/8
28
Ref. G00.320A
Bath & Shower
4 3/4
7 7/8
R
/8
15
Ref. A58.5100B
Refs. 5100A/US
& 5200A/US
1/4
2 7/8
3 5/8
O 2 5/8
3 1/8
4 3/8
2 3/4
1
1/2" NPTF
1/2" NPTF
5 7/8
1/2" NPTF
Ref. G00.5100A/US
1/2" NPTF
5 7/8
3 1/8
2 3/4
1
3/4" NPTF
3/4"
NPTF
Ref. G00.5200A/US
¾˝ thg thermostat
cap without trim
3/4"
NPTF
2 1/4
2 1/8
3/4" NPTF
3 1/8
O2
6 1/2
O1
O 2 3/8
O 5/8
O 2 3/8
1/2"
NPTF
2 5/8
Lg: 59
Ref. A58.52/US
Shower set
with handshower
and fixed hook
29
Bath & Shower
O1
4 7/8
O 3/4
1 1/2
O 2 3/8
1 7/8
1/2" NPTF
1/2"
45°
Ref. A58.82/US
45° bend, 4 ⅞˝ long
1
10
45°
O 2 3/8
O 3/4
O1
1 1/8
1/2" NPTF
1/2"
Ref. A58.84/US
O 2 3/8
1
14
O 3/4
O1
2 3/8
1/2" NPTF
1/2"
Ref. A58.84BC/US
2 3/8
6 3/4
1 1/2
1/2"
NPTF
1/2"
30
Ref. G00.85/US
O 4 3/4
Bath & Shower
3 5/8
1/2
Ref. G00.688/US
Shower head, small
can, 4 ¾˝ diameter
3 5/8
1/2"
Ref. G00.286/US
Shower head,
7 ⅞˝ diameter
O 7 7/8
1 3/4
4 1/4
1/2"
Ref. G00.288L/US
water protection
O 2 3/8
O 2 3/4
O1
2 3/8
1
1/2" NPTF
O 1 1/8
Ref. A58.290/BUS
31
Accessories
Ref. A58.504N
3
1 3/4
O 7 1/8
32
3 3/4
3 1/8
O1
1 3/4
25 3/4
Ref. A58.526/60
Towel bar, 25 ¾˝ long
1
Accessories
1 3/4
3 1/8
Ref. A58.517
Robe hook
7 3/4
3 1/8
1 3/4
5
2 1/2
Ref. A58.543M
Paper roll holder
5 7/8
10 1/4
9
77
/8
2
Ref. G00.2626
Ref. G00.3626
Large corner soap
33
B eluga
with le ver handles
35
36
Basin
q 55
3/4"
2 3/4
1 3/8
70
1/2"
3/4"
q 55
5 1/8
Basin
6 1/8
1/2"
1/2"
11 3/4
hose length
25°
O 2 1/8
O 1 1/4
1"1/4
4 3/8
2
4 3/8
Ref. G1U.151/US
Widespread lavatory
set with drain
3 1/4
2 3/8
9
2 7/8
2 1/8
Ref. G1U.20SGAUS
set less drain with
super goliath spout
37
Bath & Shower
3/4"NPT
4 1/2
q 2 1/8
1"
q3
1 3/4
q 2 1/8
1"
3/4"
1"
1 5/8
2 3/4
3 1/4
6
7 1/4
7 7/8
3/4"NPT
Ref. G1U.112BGUS
Roman tub set with
divertor spout and
handshower, ¾˝
1 5/8
5 1/4
2
q 2 1/8
O 1 1/8
5 5/8
3/4"
NPTF
Ref. G1U.22G/US
Bath spout, wall mounted
3 1/4
3 Maxi
2 7/8
M 24 x 100
q 2 1/8
5/8 mini
Ref. G1U.30B
valve without head
38
Bath & Shower
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30CUSA
cartridge for cold
without trim
1/2" NPTF
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30HUSA
cartridge for hot
without trim
1/2" NPTF
2 7/8
3/4"
NPTF
M24x100
2 7/8
3/4"
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
Ref. G00.32CUSA
cartridge for cold
without trim
2 7/8
3/4"
NPTF
3/4"
M24x100
2 7/8
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
Ref. G00.32HUSA
cartridge for hot
without trim
39
Bath & Shower
3/4
3 3/4
3 1/4
q 4 3/4
Ref. G1U.320B
Trim for pressure
balance valve
3 7/8
3 3/8
1/2 NPT
1/2 NPT
3
4 1/8
1/2 NPT
1/2 NPT
5
O 2 1/4
4
6 1/8
Ref. G00.320A
40
Bath & Shower
4 3/4
7 7/8
1/4
2 1/2
3 5/8
O 2 5/8
3 1/8
Ref. G1U.5100B
Refs. 5100A/US
& 5200A/US
4 3/8
2 3/4
1
1/2" NPTF
1/2" NPTF
5 7/8
1/2" NPTF
Ref. G00.5100A/US
1/2" NPTF
5 7/8
3 1/8
2 3/4
1
3/4" NPTF
3/4"
NPTF
Ref. G00.5200A/US
¾˝ thg thermostat
cap without trim
3/4"
NPTF
2 1/4
2 1/8
3/4" NPTF
3 1/8
6 5/8
q2
O1
q 2 1/8
O 5/8
q 2 1/8
1/2"
NPTF
2 5/8
Lg: 59
Ref. G1U.52/US
Shower set
with handshower
and fixed hook
41
Bath & Shower
O1
5
O 3/4
1 1/2
q 2 1/8
1 7/8
1/2"
NPTF
45°
Ref. G1U.82/US
45° bend, 5˝ long
7/8
10
O1
1 1/8
1/2"
NPTF
O 3/4
45 °
q 2 1/8
1/2"
1/2"
Ref. G1U.84/US
O1
2 3/8
1/2"
NPTF
14 1/8
O 3/4
7/8
q 2 1/8
1/2"
Ref. G1U.84BC/US
90° bend, 14 ⅛˝ long
2 3/8
6 3/4
1 1/2
1/2"
NPTF
1/2"
42
Ref. G00.85/US
References available in chrom (A02) and nickel (B01)
Bath & Shower
3 5/8
1/2"
Ref. G00.286/US
Shower head,
7 ⅞˝ diameter
O 7 7/8
1 3/4
4 1/4
1/2"
Ref. G00.288L/US
water protection
q 2 1/8
O 2 3/4
O1
2 3/8
7/8
1/2" NPTF
O 1 1/8
Ref. G1U.290/BUS
43
Accessories
O 1 3/4
6 7/8
2 7/8
Ref. G1U.504N
O 7 1/8
19 1/2
2 7/8
O 1 3/4
O 1/2
2 1/2
O 1 3/4
Ref. G1U.514/50
Towel bar 19 ½˝ long
44
Accessories
2 7/8
1
O 1 3/4
Ref. G1U.517
Robe hook
O 1 3/4
O 1 3/4
5 5/8
3
4 7/8
2 1/2
Ref. G1U.543M
Paper roll holder
5 7/8
10 1/4
9
77
/8
2
Ref. G00.2626
Ref. G00.3626
Large corner soap
45
Pure
47
Pure
48
Basin
References available in chrome (A02) only
Pure
3/4"
q 2 1/8
1/2"
3/4"
1/2"
8 1/4
1
3 1/2
5 3/8
Basin
5 3/8
q 2 3/8
1/2"
20°
11 3/4
hose length
O 2 1/8
O 1 1/4
1"1/4
4 3/8
Ref. G04.151/US
Widespread lavatory
set with drain
4 3/8
3 1/4
1 3/4
7 3/4
2 3/4
q 2 1/8
Ref. G04.20GA/US
Wall mounted lavatory set
less drain with long spout
49
Pure
Bath & Shower
3/4"
3/4"NPT
5 7/8
1"
1"
2 1/4
1"
6
3 1/2
4 1/4
9
7
3/4"NPT
Ref. G04.1122/US
Deck mounted 2
valve roman tub set
with handspray and
mixing valve
2 1/8
3/8"
3/4"
NPTF
2
8 5/8
Ref. G04.22SG/US
Wall mounted
roman tub spout
9 1/2
q 2 1/8
2 3/4
M 24 x 100
3 1/4
3
1/2 mini
Ref. G04.30B
valve without head
50
Pure
Bath & Shower
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30CUSA
cartridge for cold
without trim
1/2" NPTF
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30HUSA
cartridge for hot
without trim
1/2" NPTF
2 7/8
3/4"
NPTF
M24x100
2 7/8
3/4"
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
Ref. G00.32CUSA
cartridge for cold
without trim
2 7/8
3/4"
NPTF
3/4"
M24x100
2 7/8
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
Ref. G00.32HUSA
cartridge for hot
without trim
51
Pure
Bath & Shower
3/4
Ref. G04.320B
Trim for pressure
balance valve
2 5/8
3 1/4
q 4 3/4
3 7/8
3 3/8
1/2 NPT
1/2 NPT
3
4 1/8
1/2 NPT
1/2 NPT
5
O 2 1/4
4
6 1/8
52
Ref. G00.320A
Pure
Bath & Shower
4 3/4
7 7/8
1/4
3 1/4
4
O 2 5/8
3 1/8
Ref. G04.5100B
Refs. 5100A/US
& 5200A/US
4 3/8
2 3/4
1
1/2" NPTF
1/2" NPTF
5 7/8
1/2" NPTF
Ref. G00.5100A/US
1/2" NPTF
5 7/8
3 1/8
2 3/4
1
3/4" NPTF
3/4"
NPTF
Ref. G00.5200A/US
¾˝ thg thermostat
cap without trim
3/4"
NPTF
2 1/4
2 1/8
3/4" NPTF
3 1/8
6 5/8
q2
O1
q 2 1/8
O 5/8
q 2 1/8
1/2"
NPTF
2 5/8
Lg: 59
Ref. G04.52/US
Shower set
with handshower
and fixed hook
53
Pure
Bath & Shower
O1
5
O 3/4
1 1/2
q 2 1/8
1 7/8
1/2"
NPTF
45°
Ref. G04.82/US
45° bend, 5˝ long
7/8
10
O1
1 1/8
1/2"
NPTF
O 3/4
45 °
q 2 1/8
1/2"
1/2"
Ref. G04.84/US
O1
2 3/8
1/2"
NPTF
14 1/8
O 3/4
7/8
q 2 1/8
1/2"
Ref. G04.84BC/US
2 3/8
6 3/4
1 1/2
1/2"
NPTF
1/2"
54
Ref. G00.85/US
Pure
Bath & Shower
3 5/8
1/2"
Ref. G00.286/US
Shower head,
7 ⅞˝ diameter
O 7 7/8
1 3/4
4 1/4
1/2"
Ref. G00.288L/US
water protection
q 2 1/8
O 2 3/4
O1
2 3/8
7/8
1/2" NPTF
O 1 1/8
Ref. G04.290/BUS
55
Pure
Accessories
2 3/4
6 7/8
q2
Ref. G04.504N
O 7 1/8
24 1/8
q2
O 5/8
2 3/4
q2
Ref. G04.514/60
Towel bar 24 ⅛˝ long
56
Pure
Accessories
q2
2 3/4
2 1/4
Ref. G04.517
Robe hook
4 1/2
2 3/4
3 3/4
q 2
Ref. G04.538AC
Paper roll holder, single
mount with cover
3 1/2
2 1/2
3 1/8
5 7/8
10 1/4
9
77
/8
2
Ref. G00.2626
Ref. G00.3626
Large corner soap
57
Faubourg
with le ver handles
59
60
Basin
3/4"
O 2 3/8
1 3/8
O 2 3/8
3/4"
1/2"
3
3 1/4
3/4"
2 3/8
Basin
5 1/2
1/2"
0°
O 2 1/8
O 1 1/4
1"1/4
Ref. G2U.151/US
Widespread lavatory
set with drain
4 3/8
4 3/8
3 1/4
O3
10
3 1/4
O 2 3/8
Ref. G2U.20SGA/US
set less drain with
super goliath spout
61
Bath & Shower
3/4"
6 1/8
3/4"
NPT
Ref. G2U.112BSGUS
Roman tub set with
divertor spout and
handshower,
¾ deluge valves
O 2 3/8
1"
1 5/8
3 1/4
4 3/4
1"
O 2 3/8
O 2 3/8
1"
1 3/4 2 7/8
8 5/8
3 1/4
3/4"
NPT
5/8
3 1/4
3 1/4
O 6 1/8
Ref. G2U.320B
Trim for pressure
balance valve
Ref. G00.320A
3 7/8
3 3/8
1/2 NPT
1/2 NPT
3
4 1/8
1/2 NPT
1/2 NPT
5
O 2 1/4
4
6 1/8
62
Bath & Shower
3/4"
NPTF
O3
9 3/8
O 1 1/8
1 1/8
Ref. G2U.22SG/US
Wall mounted
roman tub spout
10
3 1/4
3 Maxi
O 2 3/8
1/2 mini
3 1/8
Ref. G2U.30B/C
Trim for cold wall
valve without head
O 2 3/8
3 Maxi
3 1/4
1/2 mini
3 1/8
Ref. G2U.30B/H
Trim for hot wall
valve without head
O 2 3/8
3 1/8
3 Maxi
3 1/4
1/2 mini
Ref. G2U.30B/N
valve without head
63
Bath & Shower
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30CUSA
cartridge for cold
without trim
1/2" NPTF
5 1/4
1/2" NPTF
1 3/4
2 1/2
24 x 100
Ref. G00.30HUSA
cartridge for hot
without trim
1/2" NPTF
2 7/8
3/4"
NPTF
Ref. G00.32CUSA
cartridge for cold
without trim
M24x100
2 7/8
3/4"
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
2 7/8
3/4"
NPTF
64
Ref. G00.32HUSA
cartridge for hot
without trim
3/4"
M24x100
2 7/8
2 3/8 mini
4 5/8 Maxi
5/8
3/4"
NPTF
Bath & Shower
4 3/4
7 7/8
R
15
/8
1/4
3 1/4
Ref. G2U.5100B
Refs. 5100A/US
& 5200A/US
4 1/2
O 2 5/8
3 1/8
4 3/8
2 3/4
1
1/2" NPTF
1/2" NPTF
5 7/8
1/2" NPTF
Ref. G00.5100A/US
1/2" NPTF
5 7/8
3 1/8
2 3/4
1
3/4" NPTF
3/4"
NPTF
Ref. G00.5200A/US
¾˝ thg thermostat
cap without trim
3/4"
NPTF
2 1/4
2 1/8
3/4" NPTF
3 1/8
O2
6 1/2
O1
O 2 3/8
O 5/8
O 2 3/8
1/2"
NPTF
2 5/8
Lg: 59
Ref. G2U.52/US
Shower set
with handshower
and fixed hook
65
Bath & Shower
O 2 3/8
5
O 3/4
O1
1 1/2
1 7/8
1/2"
NPTF
45°
Ref. G2U.82/US
45° bend, 5˝ long
O 2 3/8
10
O1
1 1/8
1/2"
NPTF
O 3/4
45°
7/8
1/2"
1/2"
Ref. G2U.84/US
O1
2 3/8
1/2"
NPTF
14 1/8
O 3/4
7/8
O 2 3/8
1/2"
Ref. G2U.84BC/US
2 3/8
6 3/4
1 1/2
1/2"
NPTF
1/2"
66
Ref. G00.85/US
O 4 3/4
Bath & Shower
3 5/8
1/2
Ref. G00.688/US
Shower head, small
can, 4 ¾˝ diameter
3 5/8
1/2"
Ref. G00.286/US
Shower head,
7 ⅞˝ diameter
O 7 7/8
1 3/4
4 1/4
1/2"
Ref. G00.288L/US
water protection
O 2 3/8
O 2 3/4
O1
2 3/8
7/8
1/2" NPTF
O 1 1/8
Ref. G2U.290/BUS
67
Accessories
2 5/8
6 7/8
O 2 3/8
Ref. G2U.504N
O 7 1/8
O 3/4
2 5/8
O 2 3/8
20 1/2
68
Ref. G2U.514/50
Towel bar 20 ½˝ long
Accessories
O 2 3/8
2 1/4
Ref. G2U.517
Robe hook
O 2 3/8
3 1/4
2 5/8
O 2 3/8
6 1/8
Ref. G2U.543M
Paper roll holder
2 1/2
4 7/8
5 7/8
10 1/4
9
77
/8
2
Ref. G00.2626
Ref. G00.3626
Large corner soap
69
A unique Know-How
1
2
3
4
The company is master of all trades,
with all of the know-how involved in the
manufacture of a valve or faucet or accessory.
Research, development and design Tooling
All our fittings and accessories are made
of 100% brass.
The best demonstration would be to hold a
THG product in one’s hand. Finish, assembly
and generosity of raw materials all speak
for themselves. Everything conspires to make
you believe that you are in the presence of an
exceptional product, and one that will remain
so through the years.
Foundry
The brass is cast around 900°C. The variety of the
equipment, both coring and moulding, makes possible
the creation of a large variety.
The quality of THG products is the result
of every aspect of THG company policy,
the essential points of which are as follows:
- More than 10 trades incorporated into the product.
Design, Research & Development, tooling, foundry,
machining, polishing, plating (environment friendly:
pollution-free), assembly…
- The alliance of a craft know-how with modern
equipment (polishing robots, N.C. drilling
and threading machines…)
- Unequalled depth of range of elegant bathroom fittings.
- THG’s know-how is recognised throughout the world.
Machining
THG is equipped with the latest generation of numerical
control centres, but has nevertheless retained the knowhow and the people capable of creating products which
can satisfy the very different needs of our market.
Polishing
Each part of the faucet is carefully polished.
Plating workshop
While complying with the most constraining
environmental standards, we finish our products
according to the desires of our customers.
The chosen finishing is settled by electrolysis
on the faucet (or by varnishing for lacquers).
Assembly
All faucet parts are UV-glued.
Shipping
After final inspection, customer orders
are packed and then shipped around the world
by every conceivable means of transport.
A rigorous control is made at each step
of the manufacturing.
70
1. Tooling
2. Foundry
3. Polishing
4. Quality control
THG Warranty
THG warrants to the purchaser or homeowner all plumbing
and accessory products sold by THG USA, to be free from
manufacturing defects in materials and workmanship. THG limits this warranty for a period of five years from the date of
delivery. THG warrants its products against mechanical failure
for a period of five years. Finishes are warranted for a period
of one year, with the exception of polished chrome, which is
warranted for five years. Any defects in finish will usually appear within the first weeks of use. Proof of purchase (original
sales receipt) from the original purchaser must accompany all
warranty claims.
REPAIR OR REPLACEMENT
If within the applicable warranty period the covered products
shall be proved to the satisfaction of THG to be defective,
THG will repair or replace such products, at its expense (provided that such repair or replacement shall not include installation costs). THG’s obligation shall be limited to such repair
and replacement and shall be conditioned upon THG’s receiving notice of any alleged defect within the applicable warranty
period. (Purchaser shall be responsible for all shipping charges
for returned products.)
LIMITATIONS ON WARRANTY COVERAGE
Warranties do not cover installation or any other labor charges,
and do not apply to:
• Products that have not been installed by a licensed plumbing
contractor;
• Products subject to normal wear and tear;
• Products which have been repaired, altered or modified in any
way by purchaser or any person, or not using THG service
parts;
• Products which have not been installed, used, maintained or
stored in accordance with the instructions provided to purchaser by THG USA;
• Products which have been used for purposes other than or in
a manner contrary to their intended and normal use; products that have been used outdoors;
• Products which have been damaged as a result of misuse,
negligence, freezing, accident or faulty installation or maintenance;
• Products damaged by the effects of dirt, foreign bodies carried by water (sand and debris), salt water air, hard water,
lime scale, or abrasive or aggressive cleaners;
• Products sold “as is” from dealer or showroom displays.
• Products purchased from any source other than a THG USA
authorized dealer/showroom, or purchased via the internet.
Care and Cleaning of Metal Faucets
and Fittings
THG recommends following the care and cleaning guidelines as
set forth by the DPHA (Decorative Plumbing & Hardware Association). Below is an overview of those guidelines; for complete instructions and product recommendations please refer
to the DPHA Care and Maintenance brochure.
For all finishes: to prevent water spots, wipe off water with
a clean, soft, damp cloth after each use. NEVER use an abrasive cleaning product, cleanser, ammonia-based cleaner, harsh
chemicals or bleach. Use a mild ph-neutral soap mixed with water for regular cleaning.
Uncoated polished finishes: includes polished chrome (A02),
polished nickel (B01), polished silver rhodium (F18), polished
luxbrass (D03), gold polished (F01), silver polished (D08), polished unlacquered brass (A01), polished black nickel (D24) a
mild metal polish can be used to remove light oxidation. Faucet
wax should be used after polishing to prevent oxidation.
Uncoated matt finishes: luxbrass matt (H16), luxbrass satin
(H12), luxbrass graveled (H13), nickel matt (C01), nickel satin
(C05), nickel graveled (C44), gold matt uncoated (F07), etc.
These finishes will oxidize and darken over time. To reduce oxidation, use a faucet wax on a regular basis.
Coated (lacquered) finishes: brass coated (C04), silver polished antique (H03), silver antique matt coated (H08), bronze
clear uncoated (D01), bronze matt coated (D05), red copper
polished coated (H01), red copper antique coated (H24), etc.
wax monthly with a faucet wax designed for use with lacquered
finishes.
Living finishes: bronze satiny (H27), oil rubbed bronze natural
(D21), oil rubbed bronze US (D10), etc. finishes will vary in
color and darkness, changing with time. “Renaissance Wax” can
be applied to uncoated oil rubbed bronze finishes to darken the
bronze and reduce wear on finish.
In addition, for a deep clean and to remove residual or corrosive markings we recommend a monthly application of the
following THG cleaning products:
Renov’rob: for use on chrome and nickel finishes. This wax and
organic soap based cleaner, applied and removed with a nonabrasive soft cloth, creates a protective wax-film which which
enables the fittings to be polished and produces a lasting brightness.
Brillor: for use on gold, luxbrass and satin finishes. This fattyacid soap and micro-granules of organic content, applied and
removed with a non-abrasive soft colth, creates a protective
wax film which enables the fittings to be polished and produces
a lasting brightness.
71
THG USA 6601 Lyons Road - Coconut Creek - FL 33073 - USA
Tel: 954 425 8225 - Fax: 954 425 8301 - Email: info@thgusa.com - www.thgusa.com
© Photos: Didier Grieu - Design: THG - Printed in EU - April 2011 edition
Text and pictures are not binding and can be modified without any previous notice

Stock Program - THG USA website

Transcription

Similar documents

ALBERTA • • - Gordon Food Service