Joint 18th International Heat Pipe Conference and 12th - IHPC-IHPS

Transcription

www.heatpipe.or.kr
Joint 18th IHPC and 12th IHPS
Joint 18th International
Heat Pipe Conference and
12th International Heat Pipe Symposium
June 12(Sun.) ▶ 16(Thu.), 2016
Ramada Plaza Jeju Hotel, Jeju, Korea
Supported by
Organized by
CI_삼진테크
Sponsored by
CI 영문
1. 영문로고
JAPAN ASSOCIATION
for HEAT PIPE
Table of
Contents
Joint 18th International Heat Pipe Conference and
Welcome Message Organizing Committee
… 5
Conference Information
… 8
… 8
… 9
… 10
… 13
International Committee
Local Organizing Committee
Conference Venue
Registration
Social Events
General Information
Program Information
Conference Topic
Program at a Glance
Session Time Table
Keynote Lecture
Technical Program
Oral Session
Poster Session
Keynote Lecture
Oral Session
June 13, Monday
June 14, Tuesday
June 15, Wednesday
June 16, Thursday
Poster Session
June 13, Monday
June 15, Wednesday
June 16, Thursday
Abstracts
Author Index
… 6
… 6
… 7
… 17
… 17
… 18
… 19
… 22
… 23
… 23
… 32
… 37
… 37
… 41
… 43
… 58
… 71
… 82
… 91
… 93
… 107
… 119
… 130
Organized by
Supported by
JAPAN ASSOCIATION
for HEAT PIPE
CI_삼진테크
Sponsored by
CI 영문
1. 영문로고
CI 한글
주
4
Welcome Message
It is my great pleasure to announce that the 18th
International Heat Pipe Conference and the 12th
International Heat Pipe Symposium (Joint 18th IHPC and
12th IHPS) is held as the first-time joint event in Jeju, Korea
during June 12 to 16, 2016.
Following up its successful organization of the IHPC and
the IHPS series, this joint conference focuses on topics
Professor
Joon Hong Boo
related to heat pipe and thermosyphon developments, and
Conference Chair
provides a forum for exchange of up-to-date information
and experiences among scientists and engineers from
around the world. The Conference is the most valuable
opportunity for all participants from industry and academia
to share their professional knowledge and to promote
friendship with experts.
Welcome to Jeju for this unique and historic gathering in
the midst of enchanting environment of the World Natural
Heritage.
5
Organizing Committee
International Committee
Honorary Chairman
Prof. M. Groll (Stuttgart, Germany)
Chairman
Prof. Yu. F. Maydanik (Ekaterinburg, Russia)
Members
Prof. A. Akbarzadeh (Melbourne, Australia)
Prof. J. M. Ochterbeck (Clemson, USA)
Prof. J. Bonjour (Lyon, France)
Prof. K. S. Ong (Kuala Lumpur, Malaysia)
Prof. J. H. Boo (Seoul, Korea)
Prof. W. Qu (Beijing, China)
Prof. C. A. Busse (Leggiuno, Italy)
Prof. P. Stephan (Darmstadt, Germany)
Prof. S. W. Kang (Taipei, Taiwan)
Mr. W. Supper (Noordwijk, The Netherlands)
Prof. M. Katsuta (Tokyo, Japan)
Prof. P. Terdtoon (Chiang Mai, Thailand)
Prof. S. Khandekar (Kanpur, India)
Prof. L. L. Vasiliev (Minsk, Belarus)
Prof. M. Mantelli (Florianopolis, Brazil)
6
Local Organizing Committee
Chair
Prof. J. H. Boo (Korea Aerospace Univ.)
Co-chair for Industry
Dr. K. S. Kim (Apack, Inc.)
Dr. Y. S. Lee (KIER)
Secretary General
Prof. S. H. Rhi (Chungbuk Nat’l Univ.)
Members
Prof. W. G. Chun (Jeju Nat’l Univ.)
Dr. S. H. Moon (ETRI)
Dr. W. Joung (KRISS)
Prof. D. H. Cho (Daejin Univ.)
Prof. J. S. Kim (Pukyung Nat’l Univ.)
Prof. C. Byon (Yeungnam Univ.)
Prof. J. S. Seo (GyeongSang Nat’l Univ.)
Mr. C. Y. Choi (Samjin Tech Co., Ltd.)
Mr. S. S. Kim (Daehong Enterprise Co., Ltd.)
Dr. Y. P. Lee (KITECH)
Prof. S. J. Kim (KAIST)
Prof. M. S. Kim (Chung-Ang Univ.)
Dr. K. W. Lee (KIER)
Dr. W. B. Chung (Daehong Enterprise Co., Ltd.)
Dr. W. H. Lee (KIER)
Prof. Y. C. Park (Jeju Nat’l Univ.)
7
Conference Information
Conference Venue
Ramada Plaza Jeju Hotel is a top-notch deluxe hotel which is located within five minutes’ ride from both Jeju
harbor and Jeju International Airport. It can be reached within an hour wherever you are on the Jeju Island.
Various types of 380 guest rooms which command a magnificent view of mountains and the sea are in place
awaiting their guests. Besides, attached facilities such as the convention center which can accommodate up
to 1,200 people, small and medium-sized seminar rooms, health club, indoor and outdoor swimming pools,
and hot spa, etc. guarantee successful business transactions and comfortable amenities to its guests.
Floor Plan
8
Registration
Participants can register on-site during the conference. And registration desk is set up on the 2nd floor of
Ramada Plaza Jeju Hotel during the conference.
Registration is divided into ‘Full’ registration and ‘One-day Pass’ registration.
Categories
Full Registration Fee
Regular Registrant
$850
Student
$500
Accompanying Person
$350
One-day Pass Registration Fee
$400
Regular Registrants:
• ‌All authors and co-authors are expected to register as ‘Regular registrants’, unless they can be
categorized as students (please see below).
• ‌Participants from industry, private and governmental research and development laboratories,
independent consultants and technical managers, etc. are also expected to register as ‘Regular
registrants’.
• ‌Registration fee of the ‘Regular registrants’ includes admission to all technical sessions, exhibition,
coffee breaks, lunches, welcome reception, banquet, conference tour, and a conference kit including a
program book.
Students:
• ‌‘Students’ normally mean graduate students and interns/temporary employees of universities/research
organizations. Students should be able to present a valid student ID/certificate during registration.
• ‌Registration fee of the ‘Student registrants’ includes admission to all technical sessions, exhibition,
coffee breaks, lunches, welcome reception, banquet, conference tour, and a conference kit including a
program book.
Accompanying Persons:
• ‌Accompanying persons denote family members and friends of regular registrants, whose name should
be identified at the time of registration. Authors and co-authors may not be regarded as accompanying
persons.
• ‌Registration fee of the accompanying person includes admission to welcome reception, exhibition,
banquet, conference tour, a family program with lunches, and a conference kit for the accompanying
person.
One-day Pass Registrator:
• ‌Registration fees of the One-day Pass include admissions to technical sessions, exhibition, coffee
breaks, and lunches, only for the specified participating day. A program book will be provided.
Extended participation will be allowed if the difference with the Full registration is paid.
9
Social Events
Welcome Reception
Welcome Reception is held at the Ballroom1 (2F) from 18:00 to 20:00 on Sunday June 12. Beer will be
provided along with snacks and light food for greetings and free talking in an informal environment. All
participants are welcome.
Opening Ceremony
Opening Ceremony is held at the Ballroom2 (2F) from 08:20 to 09:00 on Monday June 13.
Conference Tour & Jeju Dinner
On Tuesday, June 14, exiting Conference Tour is waiting for you. We provide every participant with a halfday tour around the most typical spots to enjoy the nature of Jeju island. The tour consists of two course
options: East Jeju and West Jeju. There will be courtesy bus service for participants of the tour. The bus
will be set out at 12:40 on front of Ramada Plaza Jeju Hotel. You can check more details at registration
desk. Jeju Dinner will be provided as the last event of the Conference Tour. Participants can enjoy local
food with special flavor in local restaurant (Jinju sik-dang). In terms of participants who want to attend Jeju
dinner without participating for the Conference Tour, we recommend you take taxi to get the restaurant. It
will take about 20 min. from our conference venue Ramada Plaza Jeju Hotel by taxi. Please note that Jeju
Dinner will start from 19:00.
West Course
East Course
Choenjiyeon Waterfall
Seongsan Ilchullbong
Oedolgae Rock
Bijarim Forest
Hyeonjae Beach
Sangumburi
Yongduam
Yongduam
(Seaside)
(Trekking)
Jeju Dinner
10
Information of venue of Jeju Dinner
Name : Jinju sik-dang (진주식당)
Address : Medical Center, 1543 Yeon-dong, Jeju-si (제주시 연동 1543 메디컬 센터)
Tel. : +82-64-747-5158 (064-747-5158)
▼ Jinju sik-dang (진주식당)
11
Conference Banquet
Conference Banquet is held at the Ballroom1 (2F) of Ramada Plaza Jeju Hotel from 18:00 to 20:00 on
Wednesday June 15. A formal ceremony will be hosted by the International Conference Committee. Invited
guests, regular participants and accompanying persons are cordially invited to the full dinner event. A
cultural performance will be provided by the Local Organizing Committee for entertainment. The Conference
award will be given during the banquet. It is a tradition of the heat pipe society that every participating
country presents her own performance.
Floor Plan
Closing Ceremony
Closing Ceremony is held at the Ballroom2 (2F) from 16:00 to 16:40 on Thursday June 16.
12
General Information
Certificate of Participation
Certificate of Participation is included in the name tag set. In case you happen to lose it, you can request
it by e-mail after the conference (hp2016@heatpipe.or.kr).
Chairpersons and Speakers Meeting
Each day all chairpersons and speakers (oral presentation only) are required to participate in the meeting
from 07:40 to 08:10 on the day the specific oral session is scheduled.
Meeting rooms are as follow:
Session Title
Meeting
Room
June 13
June 14
June 15
June 16
Mara (2F)
PHP-1, LHP-1, GHP-1
PHP-2, TSL-1
GHP-3, LHP-3
VC, PHP-4
Biyang (2F)
SHP-1, GHP-2
PHP-3, LHP-2
LHP-4, SHP-2
GHP/LHP
Oral Presentation
Keynote Lectures are allotted 50 min. for presentation.
Oral Presentations are allotted 20 min. for presentation and discussion under the supervision of the
chairpersons.
Poster Presentation
1. ‌Authors are kindly asked to put up their posters on the provided poster boards during the lunch time or
tea break on the day the specific poster session is scheduled.
2. ‌Please note that the session chair and review panel will be monitoring all poster no shows, therefore for
the papers to be reviewed for journal publications at least one of the authors of the paper is required to
be present by their poster during the session.
3. ‌Any materials left on the poster board at the end of the session will be removed and discarded. It is
authors’ responsibility to remove and preserve the poster in time. Local Organizing Committee will not
be responsible for the remaining posters at the end of session.
Session
Poster Session 1
Poster Session 2
Poster Session 3
Poster Session 4
Day
June 13, Mon.
June 15, Wed.
June 16, Thu.
Time
13:20~14:20
18:00~18:40
15:00~16:00
13:20~14:40
Location
Exhibition Area (2F)
Award
Several awards are given during the conference banquet including the George Grover Medal, the Donald M.
Ernst Award and Best Student Paper Award.
• ‌George Grover Medal
The Committee on International Heat Pipe Conferences has established the George Grover Medal
to honor individuals for their outstanding contributions to the development of Heat Pipe Science and
13
Technology. The medal is named in honor of Dr. George Grover, who, with his first external publication
in 1963 on heat pipes, laid the foundation for all heat pipe research and development. The medal
has been given since the 14th IHPC in 2007. This award is given in two categories: Young Scientist
Award (recognizing promising young individuals typically working in the field less than 10 years) and
Distinguished Scientist Award (recognizing significant and sustained contributions in the field).
• ‌Donald M. Ernst Award
This Best Papers Award category was established in memory of Donald M. Ernst by his friends
and colleagues to honor his achievements in the fields of Heat Pipe physics, research, application,
innovation, product development and commercialization. It has been awarded since the 16th IHPC in
2012. The selection will be done by the International Heat Pipe Conference Committee from amongst
the papers presented during the conference. The award includes a cash prize and a certificate.
The award is given in two categories: (i) for fundamental research and, (ii) for technical/technology
applications.
• ‌Best Student Paper Award
Best Student Paper Award will be given to Oral/Poster presenters who are students. ‘Students’ normally
mean graduate students and interns/temporary employees of universities/research organizations. The
selection will be done by the Local Organizing Committee from amongst the papers presented during the
conference.
Lunch
Lunches are served between 12:20 and 13:20 at Black Stones (1F) of Ramada Plaza Jeju Hotel on June
13, 15 and 16. On June 14, lunch and water will be provided to participants of Conference Tour on the bus.
- ‌Menu
Day
June 13, 15, 16
June 14
- ‌Map of Restaurant
14
Menu
Short Rib Soup, Wild Vegetable Bibimbap, Bulgogi with Mushrooms
Sandwich and Beverage
Tea Break
Tea Breaks take place in the lobby (2F) during the conference.
- ‌Tea Break Time
Day
June 13
Time
Location
10:40~11:00
16:00~16:20
June 14
10:20~10:40
June 15
10:20~10:40
June 16
10:20~10:40
Lobby (2F)
Wireless Internet
Wireless internet is available for the conference participants in the conference venue.
Taxi
In Korea there two types of taxis, the regular and the Mobum (black color with yellow taxi cap on the roof).
Usually Mobum taxi runs with bigger and nicer cars but it charges more than the regular taxi. You can
easily find taxis everywhere in Jeju.
Credit Cards
Major international credit cards are commonly accepted at most hotels, department stores, restaurants,
and shops. Restaurants and shops generally display signs indicating what cards they accept.
Electricity
In Korea, outlets for 220 volts 60 Herz are dominat. Always check the power supply before using your
equipment.
Emergency Phone Number
- 119 : Fire, Rescue & Hospital Services
- 112 : Police
- 129 : First Aid Services
- 1330 : Korea Travel Phone
15
Common Expressions in Korean Language
English
16
Korean [Pronunciation]
Hello!
안녕하세요. [an-nyeong-ha-se-yo.]
Bye!
안녕히가세요. [an-nyeong-hi-ga-se-yo.]
See you later
또 봐요. [tto-bwa-yo.]
Yes
예. [ye.]
No
아니오. [a-ni-o.]
Thank you!
고마워요. [go-ma-wo-yo.]
I'm sorry
미안합니다. [Meean-hamnida.]
Please give me some more of this
이것 더 주세요. [Yigut du juseyo.]
The check, please
계산서 주세요. [Gye-saanseo juseyo.]
You're welcome!
천만에요. [cheon-man-e-yo.]
Excuse me
실례합니다. [sil-rye-ham-ni-da.]
How much is it?
얼마인가요? [eol-ma-in-ga-yo?]
Where is the restroom?
화장실이 어딘가요? [hwa-jang-sil-i-eo-din-ga-yo?]
Program Information
Conference Topic
◆ ‌Fundamental studies on thermal-fluid phenomena associated with heat pipes and closed two-phase
thermosyphons.
◆ ‌Theoretical and experimental studies of on heat pipes and thermosyphons, including capillary pumped
loop (CPL), loop heat pipe (LHP), oscillating (or pulsating) heat pipes, mini/micro-heat pipes, etc.
◆ ‌Electronics cooling applications, including thermal control of microelectronics and power electronics,
cooling of CPU, LED system.
◆ ‌Heat pipe and thermosyphon applications in energy industry, including heat exchangers, heat
regenerators, new and renewable energy systems, etc.
◆ ‌Aerospace applications of heat pipes, including spacecraft thermal control, space power systems, aircraft
thermal control, avionics cooling, etc.
◆ ‌Heat pipes for special applications, including biomedical instruments, precision metrology, agricultural
facilities, environmental systems, etc.
◆ ‌Manufacturing process and material processing associated with heat pipes and thermosyphons, including
new developments of wicks, working fluids, materials, modeling of corrosion and life tests.
◆ ‌State-of-the-art heat pipe development and applications, novel ideas of heat pipe development.
17
Program at a Glance
Date
June 12. (Sun.)
Time
June 13. (Mon.)
07:40-08:00
June 14. (Tue.)
June 15. (Wed.)
June 16. (Thu.)
Chairpersons and Speakers Meeting (Oral presentation only)
08:00-08:10
08:10-08:20
08:20-08:40
Keynote Lecture 3
(08:10-09:00)
Prof. Miao, J.
Keynote Lecture 4
(08:10-09:00)
Prof. Nagano, H.
S3-A [GHP-3]
S4-A [VC]
Tea Break
Tea Break
Tea Break
S2-C [PHP-3] S2-D [LHP-2]
S3-B [LHP-3]
S4-B [PHP-4]
Lunch
Lunch
S3-C [LHP-4]
Poster 4
[PHP/MHP/VC]
Opening Ceremony
08:40-09:00
09:00-09:20
09:20-09:40
Keynote Lecture 1 (09:00-09:50)
Prof. Lee, S.Y.
Keynote Lecture 2 (09:50-10:40)
Prof. Kaviany, M.
09:40-10:00 `
10:00-10:20
10:20-10:40 10:40-11:00
S2-A [PHP-2]
S2-B [TSL-1]
Tea Break
11:00-11:20
11:20-11:40
S1-A [PHP-1]
11:40-12:00
12:00-12:20
12:20-12:40
12:40-13:00
Lunch
13:00-13:20
13:20-13:40
13:40-14:00
Poster 1 [GHP]
14:00-14:20
14:20-14:40
14:40-15:00
15:00-15:20
15:20-15:40
15:40-16:00
Registration Open
(Personal tour
information booth
available)
16:00-16:20
S1-B [LHP-1]
S1-C [GHP-1]
Conference Tour
Poster 3
[TSL/SHP]
Break
Tea Break
Closing Ceremony
16:20-16:40
16:40-17:00
S3-D [SHP-2]
17:00-17:20
S1-D [SHP-1]
S1-E [GHP-2]
17:20-17:40
17:40-18:00
Break
18:00-18:20
Poster 2 [LHP]
18:20-18:40
18:40-19:00
19:00-19:20
19:20-19:40
19:40-20:00
20:00-21:00
18
S4-C
[GHP/LHP]
Welcome Reception
Conference Banquet
International Committee Meeting
(Committee members only)
Jeju Dinner
Session Time Table
June 12. (Sun.)
13:00-18:00
Registration Open
(Personal tour information booth available)
18:00-20:00
Welcome Reception
(Ballroom 1)
June 13. (Mon.)
Time\Session Room
07:40-08:10
08:20-09:00
09:00-09:50
09:50-10:40
10:40-11:00
Session
11:00-11:20
11:20-11:40
11:40-12:00
12:00-12:20
Ballroom 2
Ballroom 4
(Oral presentations only) [Mara, Biyang(2F)]
Opening Ceremony
Keynote Lecture 1
Prof. Lee, Sang Yong
Keynote Lecture 2
Prof. Kaviany, Massoud
Tea Break
S1-A [PHP-1]
140070
140050
140051
140041
12:20-13:20
Lunch
[Black Stones (1F)]
Session
Poster 1 [GHP]
[Exhibition Area (2F)]
13:20-14:20
Session
140017, 140031, 140053, 140056, 140104, 140147, 140150, 140198,
140211, 140218, 140223, 140251, 140272, 140213
S1-B [LHP-1]
S1-3 [GHP-1]
140006
140181
140005
140012
140022
140048
140023
140010
140038
140011
Tea Break
S1-D [SHP-1]
S1-E [GHP-2]
140019
140184
140025
140201
140066
140212
140067
140250
140102
Poster 2 [LHP]
18:00-18:40
140016, 140018, 140035, 140047, 140129, 140148, 140155, 140167,
140186, 140222, 140258
19:00-20:00
International Committee Meeting
Session
14:20-14:40
14:40-15:00
15:00-15:20
15:20-15:40
15:40-16:00
16:00-16:20
Session
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
19
June 14. (Tue.)
Time\Session Room
07:40-08:10
Session
08:20-08:40
08:40-09:00
09:00-09:20
09:20-09:40
09:40-10:00
10:00-10:20
10:20-10:40
Session
10:40-11:00
11:00-11:20
11:20-11:40
11:40-12:00
12:00-12:20
12:40-18:30
19:00-20:00
Time\Session Room
07:40-08:10
08:10-09:00
Session
09:00-09:20
09:20-09:40
09:40-10:00
10:00-10:20
10:20-10:40
Session
10:40-11:00
11:00-11:20
11:20-11:40
11:40-12:00
12:00-12:20
12:20-13:20
Session
13:20-13:40
13:40-14:00
14:00-14:20
14:20-14:40
14:40-15:00
Session
15:00-16:00
Session
16:00-16:20
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
18:00-20:00
20
Ballroom 2
Ballroom 4
S2-A [PHP-2]
S2-B [TSL-1]
140158
140043
140151
140130
140106
140153
140103
140216
140098
140248
140137
140260
Tea Break
S2-C [PHP-3]
S2-D [LHP-2]
140170
140044
140227
140055
140242
140065
140244
140071
140099
140077
Conference Tour
Jeju Dinner (Jinju sik-dang)
June 15. (Wed.)
Ballroom 2
Keynote Lecture 3 Prof. Miao, Jian Yin
S3-A [GHP-3]
140256
140100
140243
140214
Tea Break
S3-B [LHP-3]
140087
140188
140159
140165
140228
Lunch
[Black Stones (1F)]
S3-C [LHP-4]
140171
140156
140220
140172
140240
Poster 3 [TSL/SHP] [Exhibition Area (2F)]
140004, 140034, 140036, 140049, 140058, 140074, 140076, 140095,
140121, 140123, 140125, 140127, 140143, 140144, 140163, 140194,
140234, 140246, 140257, 140276
S3-D [SHP-2]
140179
140134
140202
140164
140115
Break
Conference Banquet (Ballroom 1)
June 16. (Thu.)
Time\Session Room
Ballroom 2
07:40-08:10
Keynote Lecture 4
Prof. Nagano, Hosei
S4-A [VC]
140045
140080
140108
140177
Tea Break
S4-B [PHP-4]
140169
140162
140252
140090
140119
Lunch
[Black Stones (1F)]
08:10-09:00
Session
09:00-09:20
09:20-09:40
09:40-10:00
10:00-10:20
10:20-10:40
Session
10:40-11:00
11:00-11:20
11:20-11:40
11:40-12:00
12:00-12:20
12:20-13:20
Session
Poster 4 [PHP/MHP/VC]
13:20-14:40
140009, 140032, 140062, 140075, 140078, 140082, 140085, 140094,
140110, 140112, 140116, 140117, 140135, 140136, 140141, 140154,
140175, 140182, 140207
Session
S4-C [GHP/LHP]
14:40-15:00
15:00-15:20
15:20-15:40
15:40-16:00
16:00-16:40
140191
140208
140239
Break
Closing Ceremony
* Introductory Remarks
GHP: General Aspects of Heat Pipes/Conventional Heat Pipes
LHP : Loop Heat Pipes/Capillary Pumped Loops
MHP: Micro Heat Pipes
PHP : Pulsating Heat Pipes/Oscillating Heat Pipes
SHP : Special Heat Pipes/Novel Design of Heat Pipes
TSL : Two-phase Thermosyphons/Loop Thermosyphons/Separate-type Heat Pipes
VC : Vapor Chambers/Flat Heat Pipes
21
Keynote Lecture
“Two-phase Flow Research in Mini/Micro Channels Relevant to Heat Pipe
Applications”
Professor Lee, Sang Yong
Department of Mechanical Engineering, KAIST
Korea
Monday, June 13 / 09:00-09:50, Ballroom 2
“Multiscale, Distributed Wicks”
Professor Kaviany, Massoud
Department of Mechanical Engineering, University of Michigan
USA
Monday, June 13 / 09:50-10:40, Ballroom 2
“Application of Phase Change Technology in China’s Lunar Probe”
Professor Miao, Jian Yin
Beijing Key Laboratory of Space Thermal Control Technology, China Academy of
Space Technology
China
Wednesday, June 15 / 08:10-09:00, Ballroom 2
“Challenges in Expanding the Range of Application of Loop Heat Pipe to
both Smaller Scale and Larger Scale”
Professor Nagano, Hosei
Department of Aerospace Engineering, Nagoya University
Japan
Thursday, June 16 / 08:10-09:00, Ballroom 2
22
Technical Program
Oral Session
Monday, June 13, 2016
07:40-08:10
Chairpersons and Speakers Meeting (Oral presentations only) 08:20-09:00
Opening Ceremony
[Mara, Biyang]
[Ballroom 2]
Speaker: Secretary General, Prof. Rhi, Seok Ho
09:00-10:40Keynote Lectures 1 and 2
Session Chairs: Prof.
‌
Jocelyn Bonjour, INSA de Lyon, France
Dr. Calin Tarau, Advanced Cooling Technologies, USA
09:00-09:50
09:50-10:40
[Ballroom 2]
Keynote Lecture 1
Two-phase Flow Research in Mini/Micro Channels Relevant to Heat Pipe Applications
Prof. Lee, Sang Yong (KAIST) / 39
Keynote Lecture 2
Multiscale, Distributed Wicks
Prof. Kaviany, Massoud (University of Michigan) / 39
10:40-11:00 Tea Break
[Lobby (2F)]
11:00-12:20Session 1-A [PHP-1]: Pulsating Heat Pipes/Oscillating Heat Pipes
[Ballroom 2]
Session Chairs: ‌Prof. Jocelyn Bonjour, INSA de Lyon, France
Dr. Calin Tarau, Advanced Cooling Technologies, USA
11:00-11:20(140070) Modeling and Experimental Investigation of a Thermally Driven Self-oscillating
Pump
Marijn P. Zwier, Wessel W. Wits (University of Twente), Henk Jan van Gerner (Netherlands
Aerospace Centre) / 43
11:20-11:40 (140050) Oscillation of an Isolated Liquid Plug Inside a Dry Capillary
Vyas Srinivasan (Indian Institute of Technology Kanpur), Siddhartha Kumar (PDPM Indian
Institute of Information Technology, Design and Manufacturing), Md. Asfer, Sameer
Khandekar (Indian Institute of Technology Kanpur) / 43
11:40-12:00 (140051) A Pulsating Heat Pipe Cooler for Integrated High Power LEDs
L ucang Lv (University of Chinese Academy of Sciences), Ji Li (University of Chinese
Academy of Sciences), Guohui Zhou (University of Chinese Academy of Sciences) / 44
12:00-12:20(140041) Experimental Study on a Hydrogen Pulsating Heat Pipe with Different Adiabatic
Lengths
Haoren Deng, Xiao Sun, Dongyang Han, Shunhao Wang (Zhejiang University), Bo Jiao
(Harbin University of Science and Technology), J.M. Pfotenhauer (University of Wisconson
Madison), Zhihua Gan (Zhejiang University) / 45
12:20-13:20
Lunch
[Black Stones (1F)]
23
13:20-14:20 Poster Session 1 [GHP]: General Aspects of Heat Pipes/Conventional Heat Pipes
14:20-16:00Session 1-B [LHP-1]: Loop Heat Pipes/Capillary Pumped Loops
[Ballroom 2]
Session Chairs: ‌Prof. Leonard L. Vasiliev, National Academy of Sciences of Belarus
Prof. Jong-Soo Kim, Pukyong National University, Korea
14:20-14:40 (140006) A Novel “Multi-stages” Loop Heat Pipe for Cooling Multiple Heat Sources
hristophe Figus, Louis Dandaleix, J. Hill (Airbus Defence and Space), L. Barremaecker
C
(Euro Heat Pipe) / 45
14:40-15:00 (140005) Effect of Meniscus on the Permeability of Sintered Particle Wicks
Sora Jeon, Chan Byon (Yeungnam University) / 46
15:00-15:20(140022) Development and On-orbit Operation of Loop Heat Pipes System on the Chinese Circumlunar Return and Reentry Spacecraft
Zhang Hongxing, Mi Min, Miao Jianyin, Wang Lu, Chen Yang, Ding Ting, Ning Xianwen, Huo
Yuhua (China Academy of Space Technology) / 46
15:20-15:40(140023) Design and Experimental Investigation of a Neon Cryogenic Loop Heat Pipe
He Jiang, Guo Yuandong, Zhang Hongxing, Miao Jianyin, Wang Lu (Beijing Institute of
Spacecraft System Engineering), Lin Guiping (Beihang University) / 47
15:40-16:00(140038) The Operation Mode Study of an Integrated System with Double Pulse Tube
Coolers and Double Cryogenic Loop Heat Pipes
Wang Lu, Miao Jianyin, Zhang Hongxing, Mo Qing, He Jing, Guo Yuandong (China Academy
of Space Technology) / 48
14:20-16:00Session 1-C [GHP-1]: General Aspects of Heat Pipes/Conventional Heat Pipes[Ballroom 4]
Shung Wen Kang, Tamkang University, Taiwan
‌
Dr. Kwang Soo Kim, APACK, Korea
14:20-14:40(140181) Development of Advanced High Porosity Wicks for the High Temperature Heat
Pipes of Concentrating Solar Power
Sergii Khairnasov (National Technical University of Ukraine), Charles E. Andraka (Sandia
National Laboratories), Volodymyr Baturkin, Vladlen Zaripov, Oleksandr Nishchyk (National
Technical University of Ukraine) / 48
14:40-15:00(140012) Experimental Performance and Parametric Analysis of Heat Pipe Heat Exchanger
for Air Conditioning Application Integrated with Evaporative Cooling
Tushar S. Jadhav (National Institute of Construction, Management and Research), Mandar
M. Lele (MAEER’s MIT College of Engineering) / 49
15:00-15:20(140048) High Power Heat Removal by Heat Pipes&Two Phase Heat Transfer for Electric
Vehicle
Masataka Mochizuki, Yuji Saito, Koichi Mashiko, Thang Nguyen, Randeep Singh, Thomas
van Raay (Fujikura Ltd.) / 50
15:20-15:40(140010) Experimental Study on Different Control Modes of CSHP
Jingyu Cao, Gang Pei, Jiao Dongsheng (University of Science and Technology of China),
Zhao Pinghui (University of Science and Technology of China), li Jing (University of Science
and Technology of China), Wang Yunyun (Shenzhen University) / 50
15:40-16:00(140011) Preparation and Testing of Nickel-based Superalloy/Sodium Heat Pipes
Longfei Hu, Qin Lu, Haitao Han, Siyuan Chen, Bangcheng Ai, Zhihu Xue (China Academy of
Aerospace Aerodynamics) / 51
16:00-16:20
24
Tea Break
[Lobby (2F)]
16:20-18:00 Session 1-D [SHP-1]: Special Heat Pipes/Novel Design of Heat Pipes
Session Chairs: ‌Dr. Christophe Figus, Airbus Defence and Space, France
Prof. Sung Jin Kim, KAIST, Korea
[Ballroom 2]
16:20-16:40(140019) Hybrid Variable and Constant Conductance Heat Pipes for Lunar and Martian
Environments and High Heat Flux Space Applications
Mohammed T. Ababneh, Calin Tarau, William G. Anderson (Advanced Cooling Technologies,
Inc.) / 51
16:40-17:00(140025) Thermo-Mechanical Characterization of Flexible Heat Pipes
Tanmay Jaipurkar, Sameer Khandekar, Pushpit Kant, Bishakh Bhattacharya (Indian Institute
of Technology Kanpur), Siddharth Paralikar (Golden Star Technical Services Pvt. Ltd.) / 52
17:00-17:20(140066) Heat Pipes with Variable Thermal Conductance Property Developed for Space
Applications
V. Kravets, Ye. Alekseik, O. Alekseik, S. Khairnasov (National Technical University of Ukraine),
V. Baturkin (DLR Institut für Raumfahrsysteme), T. Ho, L. Celotti (Active Space Technologies
GmbH) / 53
17:20-17:40 (140067) Modeling of a Revolving Heat Pipe for Cooling of Grinding Wheels
Jiajia Chen, Yucan Fu, Houfa Shen (Nanjing University of Aeronautics and Astronautics), Dan
Ewing, Chan Y. Ching (McMaster University) / 53
17:40-18:00(140102) Design of a Thermosyphon-based Thermal Valve for Controlled High Temperature
Heat Extraction
Christopher Oshman, Corey Hardin, Jonathan Rea (Colorado School of Mines), Michele L.
Olsen (National Renewable Energy Laboratory), Nathan Siegel (Bucknell University), Phil
Parilla, David Ginley (National Renewable Energy Laboratory), Eric S. Toberer (Colorado
School of Mines) / 54
16:20-17:40Session 1-E [GHP-2]: General Aspects of Heat Pipes/Conventional Heat Pipes[Ballroom 4]
Session Chairs: ‌Prof. Masafumi Katsuta, Waseda University, Japan
Prof. Jeong-Se Seo, Gyeongsang National University, Korea
16:20-16:40(140184) Experimental Investigation for the Optimization of Heat Pipe Performance in Latent
Heat Thermal Storage
Chandrakishor L. Ladekar, S. K. Chaudhary, S. S. Khandare (RTM Nagpur University) / 55
16:40-17:00(140201) Cooling of LED Headlamp in Automotive by Heat Pipes
Randeep Singh, Masataka Mochizuki, Yuji Saito, Tadao Yamada, Tien Nguyen, Thang
Nguyen (Fujikura Ltd.) / 55
17:00-17:20(140212) Modelling and Performance of Heat Pipes With a Long Evaporator Sections
Wessel W. Wits (University of Twente), Gert Jan Te Riele (Thales Netherlands) / 56
17:20-17:40(140250) Permeability Model of Sintered Porous Media: Analitycal and Experimental
Juan Pablo Flórez M., Maria E. Chiamulera, Marcia B. H. Mantelli (Federal University of Santa
Catarina - Labtucal) / 57
18:00-18:40 Poster Session 2 [LHP]: Loop Heat Pipes/Capillary Pumped Loops
19:00-21:00
International Committee Meeting (Committee members only)
25
Tuesday, June 14, 2016
07:40-08:10 Chairpersons and Speakers Meeting (Oral presentations only)
08:20-10:20Session 2-A [PHP-2]: Pulsating Heat Pipes, Oscillating Heat Pipes Session Chairs: ‌Prof. Marco Marengo, University of Brighton, UK
Prof. Yuwen Zhang, University of Missouri, USA
[Mara, Biyang]
[Ballroom 2]
08:20-08:40
(140158) In Situ Investigation of Liquid Films in PHP
L aura Fourgeaud (Université Grenoble Alpes), Vadim Nikolayev (Alternative Energies
and Atomic Energy Commission at Saclay), Eric Ercolani, Jérôme Duplat, Philippe Gully
(Université Grenoble Alpes) / 58
08:40-09:00 (140151) Experimental Studies of Surface Modified Oscillating Heat Pipes
Tzong-Shyng Leu, Cheng-Han Wu (National Cheng Kung University) / 58
09:00-09:20 (140106) Study on Thermal Cycle in Oscillating Heat Pipes by Numerical Analysis
Takurou Daimaru, Shuhei Yoshida, Hiroki Nagai (Tohoku University) / 59
09:20-09:40(140103) Innovative Thermal Design Satellite with Networked Variable Conductance
Oscillating Heat Pipes
Naoko Iwata, Hiyoruki Ogawa (Japan Aerospace Exploration Agency), Yoshiro Miyazaki
(Thermal Cotrol Laboratory Inc.), Hiroki Kawai, Seisuke Fukuda (Japan Aerospace
Exploration Agency) / 59
09:40-10:00(140098) Visualizations of the Flow Patterns in a Closed Loop Flat Plate PHP with Channel
Diameter above the Critical One and Tested under Microgravity
Vincent Ayel (Pprime Institut CNRS – ENSMA – Université de Poitiers), Lucio Araneo, Pietro
Marzorati (Politecnico di Milano), Cyril Romestant, Yves Bertin (Pprime Institut CNRS –
ENSMA – Université de Poitiers), Marco Marengo (University of Brighton) / 60
10:00-10:20(140137) Motion of Liquid Plugs between Vapor Bubbles in Capillary Tubes: A Comparison
between Fluids
Rémi Bertossi (Institut Polytechnique des Sciences Avancées), Vincent Ayel (Institut Pprime,
ENSMA), Balkrishna Mehta (Indian Institute of Technology Guwahati), Cyril Romestant, Yves
Bertin (Pprime Institut CNRS), Sameer Kandhekar (Indian Institute of Technology Kanpur) / 61
08:20-10:20Session 2-B [TSL-1]: Two-phase Thermosyphons/Loop Thermosyphons/Separatetype Heat Pipes
[Ballroom 4]
Session Chairs: ‌Prof. Yasushi Koito, Kumamoto University, Japan
Prof. Wessel Wits, University of Twente, Netherland
08:20-08:40(140043) Theoretical and Experimental Analysis of an Herbs Dryer Assisted by Two-phase
Thermosyphons
Luis H. R. Cisterna, Fernando H. Milanez, Marcia B. H. Mantelli (Federal University of Santa
Catarina) / 61
08:40-09:00 (140130) Effect of Heat Source Size on Cooling Performance of a JEST-Type Loop Heat Pipe
Ayaka Suzuki (Kumamoto University), Kaoru Sato (Panasonic Ecology Systems Co., Ltd.),
Yasushi Koito, Toshio Tomimura (Kumamoto University) / 62
09:00-09:20(140153) Simulation and Experimental Validation of a 400 m Vertical CO2 Heat Pipe for Geothermal Application
J.-Chr. Ebeling, S. Kabelac (Leibniz University of Hannover), S. Luckmann, H. Kruse (FKWResearch Center for Refrigeration Technology and Heat Pumps GmbH) / 62
09:20-09:40(140216) An Exhaust Heat Recovery System Utilising Thermoelectric Generators and Heat Pipes
Bradley G. Orr, Aliakbar Akbarzadeh, Petros Lappas (RMIT University) / 63
09:40-10:00(140248) Study of Thermal Characteristics in a Reverse Thermosyphon Loop
Meng-Chang Tsai (Institute of Nuclear Energy Research), Hung Wang (Tamkang University),
26
Fong-Hao Wu, How-Ming Lee (Institute of Nuclear Energy Research), Heng-Yi Li, ShungWen Kang (Tamkang University) / 63
10:00-10:20(140260) How a Wall Thermosyph on Can Enhance the Energy Saving of a Prefabricated
HouseinItaly
F. Fantozzi, S. Filippeschi, M. Mameli (University of Pisa), Marcia B. H. Mantelli, Fernando H.
Milanez (Federal University of Santa Catarina UFSC) / 64
10:20-10:40
Tea Break
[Lobby (2F)]
10:40-12:20Session 2-C [PHP-3]: Pulsating Heat Pipes/Oscillating Heat Pipes
[Ballroom 2]
Sameer Khandekar, Indian Institute of Technology Kanpur, India
‌
Dr. Young Soo Lee, KIER, Korea
10:40-11:00(140170) Hybrid Pulsating Heat Pipe for Space Applications with Non Uniform Heating
Patterns: Ground and Microgravity Experiments
D. Mangini (University of Bergamo), M. Mameli, D. Fioriti, S. Filippeschi (University of Pisa),
L. Araneo (Polytechnic of Milan), M. Marengo (University of Brighton) / 65
11:00-11:20(140227) An Experimental Investigation of Operating Limitinan Oscillating Heat Pipe
Yulong Ji, Qingzhen Zhang, Chao Chang (Dalian Maritime University), Hongbin Ma (University
of Missouri) / 65
11:20-11:40 (140242) Double Condenser Pulsating Heat Pipe Cooler
Daniele Torresin, Francesco Agostini, Bruno Agostini, Mathieu Habert (ABB Switzerland Ltd.) / 66
11:40-12:00(140244) Visualization and Thermal Resistance of Magnetic Nanofluid Pulsating Heat Pipe
Ying-Chang Liu, Yao-Chun Wang, Hung Wang, Shung-Wen Kang (Tamkang University) / 66
12:00-12:20(140099) Performances and Limits of a Multi-Source Pulsating Heat Pipe Tested Under High
Heat Flux Density
David Dufraisse (ENSMA - Pprime Institut), Vincent Ayel, Yves Bertin, Cyril Romestant
(Pprime Institut CNRS – ENSMA – Université de Poitiers) / 67
10:40-12:20Session 2-D [LHP-2]: Loop Heat Pipes/Capillary Pumped Loops
Session Chairs: ‌Dr. Donatas Mishkinis, IberEspacio, Spain
Dr. Wook Hyun Lee, KIER, Korea
[Ballroom 4]
10:40-11:00(140044) A Numerical Study on Heat Transfer Characteristics of a Loop Heat Pipe
Evaporator Using Three-Dimensional Pore Network Model
M asahito Nishikawara (Toyohashi University of Technology), Hosei Nagano (Nagoya
University), Marc Prat (Université de Toulouse) / 67
11:00-11:20(140055) Two Phase Loop SprayImpingement Cooling System
Thanh-Long Phan, Randeep Singh, Yuji Saito and Masataka Mochizuki (Electronics Business
Company Fujikura Ltd.) / 68
11:20-11:40(140065) Experimental Study and Analysis of Applying Thermoelectric Cooler to Improve
LHP Operation with Non-condensable Gas
Rui Yang, Guiping Lin, Jiang He, Lizhan Bai, Jianyin Miao (Kumamoto University) / 69
11:40-12:00(140071) Effect of Different Charge Ratioon Startup Performance of the Bifacial Evaporator
Loop Heat Pipe
Z hi Chun Liu, Song He, Wei Liu, Jin Guo Yang (HuaZhong University of Science and
Technology) / 69
12:00-12:20(140077) Loop Heat Pipe-based Hydraulic Temperature Control Technique
Wukchul Joung, Yong Gyoo Kim, Kee Sool Gam (Korea Research Institute of Standards and
Science) / 70
12:40-18:30
Conference Tour
19:00-20:00
Jeju Dinner
27
Wednesday, June 15, 2016
07:40-08:10
Chairpersons and Speakers Meeting (Oral presentations only)
[Mara, Biyang]
08:10-09:00Keynote Lecture 3
[Ballroom 2]
Session Chairs: ‌Mr. Wolfgang Supper, European Space Agency-ESTEC, Netherlands
Prof. Won Gi Chun, Jeju National University, Korea
08:10-09:00
Keynote Lecture 3
Application of Phase Change Technology in China’s Lunar Probe
Prof. Miao, Jian Yin (China Academy of Space Technology) / 40
09:00-10:20Session 3-A [GHP-3]: General Aspects of Heat Pipes/Conventional Heat Pipes [Ballroom 2]
Session Chairs: ‌Mr. Wolfgang Supper, European Space Agency-ESTEC, Netherlands
Prof. Won Gi Chun, Jeju National University, Korea
09:00-09:20 (140256) Transport Phenomena of Liquid Film in Wick of Heat Pipes
A. Nouri-Borujerdi (University of Technology) / 71
09:20-09:40(140100) An Evaluation of Hybrid Wick Design on High Performance Copper-Ethanol Heat
Pipes
Guanghan Huang, Ahmed Abdulshaheed, Wei Chang, Chen Li (University of South Carolina)
/ 71
09:40-10:00(140243) A Study on the Performanc e Characterisitics of Heat Pipes with Multiple Heat
Sources
Joon Hong Boo, Hyun Gon Kim (Korea Aerospace University) / 72
10:00-10:20(140214) Long Horizontal Vapor Dynamic Thermosyphons for Renewable Energy Sources
Leonard L.Vasiliev, A. S. Zhuravlyov, M. I. Rabetsky, L. P. Gracovich, Leonid L.Vassiliev Jr.
(National Academy of Sciences), Alexander Shapovalov, Alexei Rodin (P. O. Sukhoi State
Technical University of Gomel) / 73
10:20-10:40
Tea Break 10:40-12:20Session 3-B [LHP-3]: Loop Heat Pipes/Capillary Pumped Loops
Session Chairs: ‌Mr. Konstantin Goncharov, Lavochkin Association, Russia
Dr. Wuk Chul Joung, KRISS, Korea
[Lobby (2F)]
[Ballroom 2]
10:40-11:00 (140087) Fabrication and Characterization of Efficient Wicks for Loop Heat Pipes
R. Giraudon, S. Lips, D. Fabrègue, L. Gremillardb, E. Maire, V. Sartre (Université de Lyon) / 73
11:00-11:20(140188) Development of 100W-class Loop Heat Pipes for Space Use and On-orbit
Experiment Test Plan
Atsushi Okamoto, Ryuta Hatakenaka, Takeshi Miyakita, Hiroyuki Sugita (Japan Aerospace
Exploration Agency) / 74
11:20-11:40(140159) Capillary Thermosyph on Loop for High Power Electronic Cooling by Natural
Convection
V. Dupont, T. Nicolle, C. Billet (CALYOS S.A.) / 74
11:40-12:00(140165) Advanced Control Capillary Heat Transfer Loop (ACL) Thermal Architecture with
Multiple Evaporators and Condensers
D. Mishkinis, A. Kulakov, P. Prado, A. Torres (IberEspacio Tecnologia Aeroespacial), S.
Lapensee (ESTEC) / 75
12:00-12:20(140228) Microscale Infrared Observation of Liquid-vapor Interface Behavior on the Surface
of Porous Media for Loop Heat Pipe
K imihide Odagiri (Nagoya University), Masahito Nishikawara (Toyohashi University of
Technology), Hosei Nagano (Nagoya University) / 75
28
12:20-13:20
Lunch
[Black Stones (1F)]
13:20-15:00Session 3-C [LHP-4]: Loop Heat Pipes/Capillary Pumped Loops
Session Chairs: ‌Dr. Masataka Mochizuki, Fujikura, Japan
Mr. Chi Young Choi, Samjin Tech, Korea
[Ballroom 2]
13:20-13:40
(140171) Loop Thermosyphon Model for Condensers with Non-condensable Gas Applied to
Distillation Units
Luis H. R. Cisterna, Kênia W. Milanez, Estevan G. Tavares, Marcia B. H. Mantelli, Tiago W.
Uhlmann, Fernando H. Milanezi (Federal University of Santa Catarina) / 76
13:40-14:00(140156) Analytical Model for the Dynamics of a Capillary Pumped Loop Subjected to High
Amplitude Heat Load Steps: Estimation of the Liquid Flow Rate Overshoot
Sebastien Dutour, Ahmed Kaled (University of Toulouse) / 76
14:00-14:20(140220) Operational Characteristics of 10m-class Long-distance Loop Heat Pipeunder
Anti-gravity Condition
Kazuya Nakamura, Kimihide Odagiri, Hosei Nagano (Nagoya University) / 77
14:20-14:40 (140172) Vapor Modulated Variable Conductance Loop Heat Pipes for Space Applications
Paula Prado-Montes, Donatas Mishkinis, Javier Corrochano, Alejandro Torres (IberEspacio
Tecnología Aeroespacial) / 77
14:40-15:00(140240) Cryogenic Loop Heat Pipe Characteristics Analysis Coupling Satellite Infrared
Detector and Cryogenic Radiator
Hyokjin Cho (Korea Aerospace Research Institute), Lingxue Jin (Korea Advanced Institute
of Science and Technology), Guee-Won Moon (Korea Aerospace Research Institute),
Sangkwon Jeong (Korea Advanced Institute of Science and Technology) / 78
15:00-16:00Poster Session 3 [TSL/SHP]: Two-phase Thermosyphons/Loop Thermosyphons/
Separate-type Heat Pipes
16:00-17:40Session 3-D [SHP-2]: Special Heat pipes/Novel Design of Heat Pipes
[Ballroom 2]
Session Chairs: ‌Prof. Hongxing Zhang, China Academy of Space Technology, China
Dr. Yoon Pyo Lee, KIST, Korea
16:00-16:20(140179) Hot Reservoir Stainless-Methanol Variable Conductance Heat Pipes for Constant
Evaporator Temperature in Varying Ambient Conditions
Jens Weyant, Darren Campo, Calin Tarau (Advanced Cooling Technologies, Inc.) / 78
16:20-16:40(140134) Preliminary Investigation on Operation Characteristics of a High Temperature
Special-shaped Heat Pipe Used in a Solar Thermochemical Reactor
Tingtinga Ma, Xiaoyuan Wang, Yuezhao Zhu, Jinling Zeng (Nanjing Tech University) / 79
16:40-17:00(140202) Gas-controlled Heat Pipes for Thermal Control System of Small Spacecraft
Konstantin A. Goncharov, Yuriy V. Panin, Kirill N. Korzhov (Heat Pipe Center of Lavochkin
Association), Adik R. Gutkin (Research Institute of Electromechanics) / 79
17:00-17:20(140164) Design and Numerical Simulation of a Flexible Heat Pipe for Human Cooling
Application
Gerardo Carbajal (Universidad del Turabo), Luis Tapia (University of Turabo) / 80
17:20-17:40(140115) AStudy on Circulation Flow of Oscillating Heat Pipe with Check Velves by
Visualization
Shuhei Yoshida, Takurou Daimaru, Hiroki Nagai (Tohoku University) / 81
17:40-18:00
Break
18:00-20:00
Conference Banquet
[Ballroom 1]
29
Thursday, June 16, 2016
07:40-08:10
Chairpersons and Speakers Meeting (Oral presentations only)
[Mara, Biyang]
08:10-09:00Keynote Lecture 4
[Ballroom 2]
Session Chairs: ‌Prof. Marcia Mantelli, Federal University of Santa Catarina, Brazil
Prof. Minsung Kim, Chung-Ang University, Korea
08:10-09:00 Keynote Lecture 4
Challenges in Expanding the Range of Application of Loop Heat Pipes to both Smaller Scale
and Larger Scale
Prof. Nagano, Hosei (Nagoya University) / 40
09:00-10:20Session 4-A [VC]: Vapor Chambers/Flat Heat Pipes
[Ballroom 2]
Session Chairs: ‌Prof. Marcia Mantelli, Federal University of Santa Catarina, Brazil
Prof. Minsung Kim, Chung-Ang University, Korea
09:00-09:20(140045) Characterization of a High Performance Ultra Thin Heat Pipe Cooling Module for
Mobile Hand Held Electronic Devices
Mohammad Shahed Ahamed, Yuji Saito, Koichi Mashiko, Masataka Mochizuki (Fujikura Ltd.)
/ 82
09:20-09:40(140080) Heat Transfer Characteristics of Flat Plate Pulsating Heat Pipe Using Self-rewetting
Fluids
Koki Yamagami, Koji Fumoto (Hirosaki University), Raffaele Savino (University of Naples
Federico II), Tsuyoshi Kawanami (Kobe University), Takao Inamura (Hirosaki University) / 82
09:40-10:00(140108) Development of Vapor Chamber Heat Spreader for Supercomputer Processor
Packaging Cooled by Liquid Cold Plate
Yuichi Yokoyama, Thanh-Long Phan, Yuji Saito, Koichi Mashiko, Masataka Mochizuki
(Fujikura Ltd.) / 83
10:00-10:20(140177) The Two-phase Spreading of High Heat Fluxes Density Dissipative Component for
Space and Non-space Applications
Mikaël Mohaupt, Stéphane Van Oost, Laurent Barremaecker (Euro Heat Pipes) / 84
10:20-10:40
Tea Break 10:40-12:20 Session 4-B [PHP-4]: Pulsating Heat pipes/Oscillating Heat Pipes
Session Chairs: Dr.
‌ Sauro Filippeschi, University of Pisa, Italy
Prof. Suk Ho Rhi, Chunkbuk National University, Korea
[Lobby (2F)]
[Ballroom 2]
10:40-11:00(140169) Thermo-hydrodynamics of Phase-changeInduced Oscillation Taylor Bubble Flows
Vyas Srinivasan (Indian Institute of Technology Kanpur), Manoj Rao (Université de Lyon),
Sameer Khandekar (Indian Institute of Technology Kanpur), Frédéric Lefèvre, Jocelyn
Bonjour (Université de Lyon) / 84
11:00-11:20(140162) Ammonia Pulsating Heat Pipe: A New Full Visualization Experiment and the
Operating Mechanism Study
Z. H. Xue, L. Chen, M. H. Xie, W. Qu, W. Li (China Academy of Aerospace Aerodynamics) / 85
11:20-11:40(140252) Experimental Research on Start-up Characteristics Heat Transfer Performance of
Pulsating Heat Pipe with Rectangular Cross-section
Wang Xuehui, Hua Chao (Zhejiang University), Gao Xu (The State Key Laboratory of
Technologies in Space Cryogenic Propellants), Zheng Haoce, Han Xiaohong, Chen
Guangming (Zhejiang University) / 85
30
11:40-12:00(140090) Thermal Performance Comparison of Closed-loop Tube Oscillating Heat Pipes with
and without Internal Microgrooves
Jian Qu, Xiao Jun Li, Qian Wang, Qin Sun (Jiangsu University) / 86
12:00-12:20(140119) Experimental Investigation on Silicon-based Pulsating Heat Pipes with Different
Channel Geometry
Jungseok Lee, Sung Jin Kim (Korea Advanced Institute of Science and Technology) / 87
12:20-13:20
Lunch
[Black Stones (1F)]
13:20-14:40Poster Session 4 [PHP/MHP/VC]: Pulsating Heat Pipes/Micro Heat Pipes/Vapor chambers
14:40-15:40Session 4-C [GHP-3/LHP-5]: General Aspects/Conventional Heat Pipes/Loop Heat
Pipes/Capillary Pumped Loops
[Ballroom 2]
Session Chairs: ‌Prof. Wei Qu, China Academy of Aerospace Aerodynamics, China
Prof. Byon Chan, Yeungnam University, Korea
14:40-15:00(140191) Self-venting Arterial Heat Pipes for Spacecraft Applications
William G. Anderson, Derek Beard, Calin Tarau (Advanced Cooling Technologies, Inc.) / 87
15:00-15:20(140208) Designing and Research of Precise Thermal Control System with Loop Heat Pipe
V. Antonov, M. Balykin, A. Golikov, K. Goncharov, K. Korzhov (Heat Pipe Center of Lavochkin
Association), V. Buz (The Odessa National University) / 88
15:20-15:40 (140239) Direct Numerical Simulation of Evaporation in a Biporous Media
Bharat. B. Sharma, Sudip. K. Samanta (CSIR-Central Mechanical Engineering Research
Institute), Himadri Chattopadhyay (Jadavpur University), Gautam Biswas (Indian Institute of
Technology Guwahati) / 88
15:40-16:00
Break
16:00-16:40Closing Ceremony
Speaker: Secretary General, Prof. Rhi, Seok Ho
[Ballroom 1]
31
Poster Session
Monday, June 13, 2016
13:20-14:20Poster Session 1 [GHP]: General Aspects of Heat Pipes/Conventional Heat Pipes
Session Chairs: ‌Prof. Xiaodong Wang, Dalian University of Technology, China
Prof. Donghyun Cho, Daejin University, Korea
(140017) Heat Pipe System Development for Railway Application Working with Speed
Motion Convection
Thomas Albertin, Jérôme Coulloux (ATHERM) / 93
(140031) Examination of the Thermoelectric Inhomogeneity of Thermocouples in an Electric
Furnace with Heat Pipe Liner
Yonggyoo Kim, Wukchul Joung, Suyong Kwon (Korea Research Institute of Standards and
Science) / 93
(140053) Modelling of Heat Transfer in the Evaporation and Condenser of the Working Fluid
in the Heat Pipe
Richard Lenhard, Milan Malcho, Jozef Jandacka (University of Zilina) / 94
(140056) Operational Characteristics and Thermal Performance of a Rectangular Heat Pipe
Fabricated on a Plastic Board
Yasushi Koito, Hiroyuki Maehara, Daisuke Shimada, Toshio Tomimura (Kumamoto University)
/ 94
(140104) A Single Unit Cooling Fins Aluminum Heat Pipe for 100w Socket Type Cob Led
Lamp
S. H. Moon, Y. W. Park (ETRI), H.M Yang (Redix Co.) / 95
(140147) Modelling of a Single Rotating Heat Pipe for Heat Pipe Assisted Annealing Concept
Metin Celik (Delft University of Technology), Geert Paulussen, Pepijn Pronk (Tata Steel),
Laurent Sturnack (Project Development Drever International), Wiebren de Jong, Bendiks Jan
Boersma (Delft University of Technology) / 95
(140150) Thermoelectric System to Increase the Cooling Power of Natural Convection Heat
Pipes
Álvaro Martínez, David Astrain, Antonio Rodríguez, Patricia Aranguren, Miguel Araiz (Public
University of Navarra) / 96
(140198) Design and Startup of TZM High-temperature Heat Pipe
Qin. Lu, Longfei Hu, Siyuan Chen, Wei.Li (China Academy of Aerospace Aerodynamics) / 97
(140211) Heat Dissipation for High Power Semiconductor Lasers by Heat Pipe Cooling
System
Shu Shili, Hou Guanyu, Wu Hao, Wang Lijie, Tian Sicong (Chinese Academy of Sciences),
Leonid L. Vassiliev (National Academy of Sciences of Belarus), Tong Cunzhu (Chinese
Academy of Sciences) / 97
(140218) Comparison between CFD Simulation, Simple Calculation and Experiment Data for
Heat Pipe Maximum Heat Transfer, Equivalent Thermal Conductivity and Thermal Resistance
Chayatis Kirdnaimongkol, Masataka Mochizuki, Thang Nguyen, Yuji Saito, Yoji Kawahara,
Tien Nguyen, and Mohammad Shahed Ahamed (Fujikura Ltd.) / 98
(140223) Heat Pipe Heat Exchanger for Heat Recovery: How Much Working Fluid Should
We Charge?
L. C. Ding (RMIT University), Y. H. Yau (University of Malaya), M. F. Remeli (University
Teknologi Mara), B. G. Orr (RMIT University), B. Singh (University Teknologi Mara), A. Date,
32
A. Akbarzadeh (RMIT University) / 98
(140251) Experimental Analysis of Thermal Performance According to Heat Pipe Working
Fluids for Evacuated Tubular Solar Collector
Hongjin Joo, Heeyoul Kwak (Korea Institute of Energy Research) / 99
(140272) Nanofluid Performance as a Working Fluid in the Heat Pipe
Joohyun Lee, Kwonsu Yong , Wukchul Joung (Korea Research Institute of Standards and
Science) / 100
(140213) Hybrid Cooling System for High-power Laser Diodes
Leonid L. Vassiliev (National Academy of Sciences of Belarus), Leonid Grakovich (National
Academy of Sciences of Belarus), Shu Shili, Hou Guanyu, Wu Hao, Wang lijie, Tian Sicong,
Tong Cunzhu (Chinese Academy of Sciences) / 100
18:00-18:40Poster Session 2 [LHP]: Loop Heat Pipes/Capillary Pumped Loops [Exhibition Area (2F)]
Session Chairs: ‌Dr. Vincent Dupont, CALYOS S.A., Belgium
Dr. Gil Bong Lee, KIER, Korea
(140016) Analysis of Chaotic Flow in a 2D Multi-turn Closed-loop Pulsating Heat Pipe
Sam M. Pouryoussefi, Yuwen Zhang (University of Missouri) / 101
(140018) Development of a LHP for Power Avionics Application
Thomas Albertin, Jérôme Coulloux (ATHERM) / 101
(140035) Low-cost Manufacturing of Loop Heat Pipe for Commercial Applications
Bin-Juine Huang, Y. H. Chuan, P. E. Yang (National Taiwan University) / 102
(140047) Startup Characteristics of Pump-assisted Capillary Phase Change Loop
Jiang Chi, Liu Wei, Liu Zhichun, Yang Jinguo, Duan Bin, Luo Xiaobing (Huazhong University
of Science and Technology) / 102
(140129) Development of a Loop Heat Pipe with Sintered Nickel Wick Using Cold Isostatic
Press Method
Wonbok Chung, Seonhong Hwang, Cheolmin Park, Yoonsung Kim, Sangsik Kim (Daehong
Enterprise Co., LTD) / 103
(140148) Ground Test of Dual Loop Heat Pipe System
Yasuko Shibano, Naoko Iwata, Hiroyuki Ogawa (Japan Aerospace Exploration Agency) / 103
(140155) The Design of a Split Loop Thermosyphon Heat Exchanger for Use in HVAC
Applications
D aniel Reist, Mark C. Stevens, Peter M. Dussinger, Michael Ellis (Advanced Cooling
Technologies, Inc.) / 104
(140167) Transient Detailed and Reduced Models of a Two-phase Loop Thermosyphon
Serge H. Bodjona, Etienne Videcoq, Manuel Girault, Yves Bertin (ENSMA) / 104
(140186) Prototype of Thin Loop Heat Pipe with Glassfiber Wick for Compact Electronics
Cooling
Alexander A. Yakomaskin (Bauman Moscow State Technical University) / 105
(140222) Experimental Study on the Driven Mechanism of a Vapor-liquid Separated Flat
Loop Heat Pipe Evaporator
Shuo Zhao, Kai Zhu, Xueqiang Li, Mingzhu Zheng, Yabo Wang (Tianjin University), Jie Wei
(Fujitsu Advanced Technologies Limited) / 105
(140258) Development and Mass Production of Loop Heat Pipes
Yury F. Maydanik (Ural Branch of the Russian Academy of Sciences), Arkadiy V. Ivanov,
Mikhail Yu. Maidanik (Thercon-LHP, Ltd.) / 106
33
Wednesday, June 15, 2016
15:00-16:00Poster Session 3 [TSL/SHP]: Two-phase Thermosyphons/Loop Thermosyphons/
Session Chairs: ‌Dr. Natalia Savchenkova, National Research University, Russia
Dr. Seok Hwan Moon, ETRI, Korea
(140004) Thermal Behavior of Heat Pipe Assisted Alkali-metal Thermoelectric Converter
Jisu Lee (Chungbuk National University), Wookhyun Lee (Korea Institute of Energy Research),
Riguang Chi, Wonsik Chung, Seokho Rhi, Kyebock Lee, Seonyong Jeong, Jongchan Park
(Chungbuk National University), Youngsoo Lee (Korea Institute of Energy Research) / 107
(140034) Mechanism and Technology of High and Super High Temperature Heat Pipes
Wei Qu, Zhihu Xue, Jijun Yu (China Academy of Aerospace Aerodynamics) / 107
(140036) Study on Heat Pipe Asisted Thermoelectric Power Generation System from
Exhaust Gas
Riguang Chi, Jongchan Park, Wonsik Chung, Seokho Rhi, Keybock Lee (Chungbuk National
University) / 108
(140049) Experimental Investigate on Heat Transfer Performance of Flat Heat Pipe Receiver
in Solar Power Tower Plant
Lin Yang, Rui W. Zhou, Xiang Ling, Hao Peng (Nanjing Tech University) / 109
(140058) Influence of Charging Ratio, Annular Clearance and Enhanced Boiling Surface on
the Thermal Performance of Bubble Jet Loop Thermosyphon
Jongsoo Kim, Sungbok Kim, Sangjin Park, Junha Kim, Jaeyoung Bae, Eonhwa Hwang,
Dobin Kim, Intaek Oh (Pukyoung National University) / 109
(140074) A New Modified Model for Simulation of a Two-phase Closed Thermosyphon
Houfa Shen, Yucan Fu, Jiajia Chen (Nanjing University of Aeronautics and Astronautics) / 110
(140076) Heat Transfer Capacity of a Closed Loop Two-phase Ammonia-stainless Steel
Thermosyphon in Lunar Gravity
Ke Wu, Jian-Fu Zhao, Zhen-Dong Li (Chinese Academy of Science), Hong-Xing Zhang,
Jiang He, Jian-Yin Miao (China Academy of Space Technology) / 110
(140095) A Study on the Boiling Heat Transfer Performance of Evaporators with Metal Foam
of Loop Type Two-phase Thermosyphon
Donghyun Cho (Daejin University), Chanyong Gweon, Sanghun Yun (Sungsan Co., Ltd.) / 111
(140121) Experimental and Numerical Study on the Heat Transfer Performance of a Single
Thermosyphon in Working Fluid Filling Rate
S. H. Oh, S. I. Kim, J. W. Choi, K. J. Lee, W. P. Chun (Korea Institute of Energy Research) / 111
(140123) Numerical Investigation of a Co2 Loop Themosyphon for Free Cooling of Data
Centers
Hainan Zhang, Shuangquan Shao, Changqing Tian (Chinese Academy of Sciences) / 112
(140125) Boiling Heat Transfer Mechanism inside the Narrow Space of Double-Tube Heat
Pipe
Risa Suenaga, Masafumi Katsuta, Taro Kato (Waseda University) / 113
(140127) Modeling of Processes in the Waste Heat Boiler with Thermosyphon
Savchenkova Natalia, Kravtsov Dmitry (The Moscow Power Engineering Institute) / 113
(140143) Length Effect on the Entrainment Limitation of a Wickless Heat Pipe
Joseph Seo, Jae Young Lee (Handong Global University) / 114
(140144) Experimental Tests on Sodium Thermosyphons
Tiago W. Uhlmann, Marcia B. H. Mantelli (Federal University of Santa Catarina), Miriam
Manzoni, Marco Marengo (University of Brighton), Per Eskilson (Cleanergy) / 114
(140163) Numerical Modeling of Heat Transfer Performance of Two-phase Closed
Thermosyphon Charged with R245fa Based on Sinda/Fluint
Limin Ma, Xiaoying Yin, Linlin Shang, Zhongli Ji (China University of Petroleum-Beijing) / 115
34
(140194) Reverse Thermosyphon in Conjunction with a Ground Source Heat Pump
Heng-Yi Li, Meng-Chang Tsai, Wei-Chi Su, Wei-Chun Liao, Fong-Hao Wu (Taoyuan County)
/ 115
(140234) Transient Numerical Model for Thermal Performance Analysis of a Two-phase
Closed Thermosyphon
Zhongchao Zhao, Hao Hu, Xiao Zhang, Pengpeng Jiang (Jiangsu University of Science and
Technology) / 116
(140246) Energy Saving Potentials from the Application of Heat Pipes on Geothermal Heat
Pump Systems
Hyungjeong Lim, Minsung Kim (Chung-Ang University) / 117
(140257) Turbulent Film Condensation in Thermosyphons
A. Nouri-Borujerdi (Sharif University of Technology) / 117
(140276) A Two-phase Loop Cooling System with Capillary Evaporator Employing Bi-layer
Copper Wick
Yongchan An, H. Kang, B. Sung, K. Yim, D.-A. Borca-Tasciuc, J. Choi (Keumkang heavy
industry Co. Ltd.) / 118
Thursday, June 16, 2016
13:20-14:40Poster Session 4 [PHP/MHP/VC]: Two-phase Thermosyphons/Loop Thermosyphons/
Session Chairs: ‌Prof. Yulong Ji, Dalian Maritime University, China
Dr. Won Bok Chung, Daehong Enterprise Co., LTD., Korea
(140009) An Interfacial Transport Analysis of Micro Heat Pipe
Eui Guk Jung, Joon Hong Boo (LG Electronics Inc.) / 119
(140032) An Improved Correlation to Evaluate the Thermal Resistance of Pulsating Heat
Pipes
Jean-antoine Gruss, Damien Gloriod, Nadia Caney, Geneviève Geffraye, Alain Memponteil
(Univ. Grenoble Alpes) / 119
(140062) Combination of Thermal Storage and Heat Spreading for High Power Portable
Electronics Cooling
Zhiwei Li, Lvcang Lv, Ji Li (University of Chinese Academy of Sciences) / 120
(140075) A Study on Thermal Performance of Parallel Connected Pulsating Heat Pipe
Byeong-Chan Kim, Daejoong Kim, Longnan Li, Ji Hoon Kim (Sogang University) / 120
(140078) Experimental Investigation on the Thermal Performance of Pulsating Heat Pipes
with Asymmetric Channels
D ong Soo Jang, Dongwoo Kim, Dowon Cha, Hanseok Mun, Yongchan Kim (Korea
University) / 121
(140082) Some Important Factors Affect the Qmax Measurement of The Vapor Chamber
Wei-Keng Lin, J.K.Chen (National Tsing-Hua University) / 121
(140085) Fundamental Experiments of a Polymer-based Vapor Chamber (Effect of Inclination
Angle)
F umihiko Hideyama, Shuto Nonoshita, Yasushi Koito, Toshio Tomimura (Kumamoto
University) / 122
(140094) Discussion on the Solar Concentrating Thermoelectric Generation Using MicroChannel Heat Pipe Array (STEG-MCHP)
G uiqiang Li, Wei Feng, Song Lv, Yi Jin, Xiao Chen, Jie Ji (University of Science and
Technology of China) / 123
(140110) Electric Motor Thermal Management System Using L-Shaped Flat Heat Pipes
35
Nandy Putra, Bambang Ariantara (Universitas Indonesia) / 123
(140112) Development of an Aluminum Flat Heat Pipe with Carbon Wire Wick
Y. W. Park, S. H. Moon (ETRI), S. H. Rhi (Chungbuk University), K. S. Choi, J. H. Lee (ETRI) / 124
(140116) A Study of Root-Zone Heating System using Bubble Jet Loop Heat Pipe for
Horticulture
J ongsoo Kim, Sangjin Park, Junha Kim, Jaeyoung Bae, Eonhwa Hwang, Dobin Kim,
Sungbok Kim, Intaek Oh (Pukyoung National University) / 124
(140117) Development of Thin Heat Pipe for Thin and High Performance Note-book PC
Yoji Kawahara, Yuji Saito, Mohammad Shahed Ahamed, Yuichi Yokoyama (Fujikura Ltd.) / 125
(140135) Volume and Saturation Temperature Variation of an Expanding Taylor Bubble in a
Heated Capillary
Antoine Voirand, Adel M. Benselama, Yves Bertin (Institut PPrime) / 126
(140136) Experimental Study on the Effect of the Ratio of Adiabatic Section Length to
Condenser Length on the Thermal Performance of Pulsating Heat Pipes
Juno Kim, Sung Jin Kim (KAIST) / 126
(140141) Experimental Investigation of a Novel Solar Collector with Pulsating Heat Pipe
H. Kavoosi Balotaki, M.H. Saidi (Sharif University of Technology) / 127
(140154) Effect of Tube Heat Conduction on the PHP Start-up
Vadim Nikolayev, Iaroslav Nekrashevych (Université Paris-Saclay) / 127
(140175) Condenser Temperature Effects on the Transient Behavior of a Pulsating Heat Pipe
L. A. Betancur (Federal University of Santa Catarina), D. Mangini (University of Bergamo),
M. Mameli, S. Filippeschi (University of Pisa), L. K. Slongo, K. Paiva, M. Marengo (Federal
University of Santa Catarina), M. Mantelli (University of Brighton) / 128
(140182) Experimental Investigation of Oscillating Heat Pipes under Direct Current and
Pulse Width Modulation Heating Input Conditions
Brent S. Taft (United States Air Force Research Laboratory), Matthew Rhodes (Mississippi
State University) / 128
(140207) A New Encapsulation Method Using Low-melting-point Alloy to Seal Micro Heat
Pipe
Congming Li, Xiaodong Wang, Chuanpeng Zhou, Yi Luo, Zhixin Li, Sidi Li (Dalian University
of Technology) / 129
36

Joint 18th International Heat Pipe Conference and 12th - IHPC-IHPS

Transcription

Similar documents

KITURAMI TURBO OIL BOILER