2006 laserlyte catalog

CATALOG #06-01
SUPER HI-PRECISION UNIVERSAL LASER BORE SIGHTING SYSTEM
.22 to .50 Caliber
Laser System Specifications
WEIGHT ............................................ 2.25 ounces
LENGTH ........................................... 6.5 inches
LASER MODULE ............................... 635nm
POWER OUTPUT ............................... 5mw
BATTERIES . ..................................... (3) A-76 Included
BATTERY LIFE .................................. Over 1.5 Hrs.
BEAM SIZE . ..................................... 2-3 in. @ 100 yds.
P L B - 0 0 0 1-14 0
Due to the precision of the Hi-Precision Laser Bore Sighting
System, LaserLyte also offers a Double Set designed for
checking barrel regulation on double rifles.
P L B - 0 0 0 2-14 0
Brass Tapered
Rotating Bushing
Stainless Steel Arbor
Calibration
Adjustment Screws
Rotating Switch
& Battery Cup
Set of Adapter Screws
Delrin® Cal. Adapters with Brass Bushings
The Most Accurate Way to Bore Sight Your Firearm
The Super Hi-Precision laser bore sighting tool features a 635nm laser module that projects a beam that diverges to approximately 2.5 inches at 100
yards—when the laser dot is projected on a target, it is used as the point-of-aim for adjusting the riflescope reticle or iron sights. This system is
designed to be simple, fast and effective, and allows bore sighting accuracy of any firearm, from .22 to .50 Caliber. For increased versatility, an optional
bore adapter for 12 to 20 gauge slug guns and shotguns is also available (see page 5). LaserLyte engineers have developed a unique calibration system
that offers perfect alignment of the laser to the central axis of the bore for near-perfect bore sighting accuracy—even before firing the first shot. The
result is not only faster, easier sight-in sessions—but also reduced ammunition consumption during the process. Bore sighting can be done indoors or
outdoors—even in broad daylight—at distances from 25 feet to 30 yards. Powered by (3) A-76 batteries (included), the tool has a total power life of
1.5 plus hours of continuous run time with an output of 5mw. CNC-machined of aircraft aluminum with a stainless steel arbor and brass tapered rotating
bushing, the system includes four Delrin® caliber adapters with brass bushings that allow for a precise fit to the bore. Each unit measures 6.5 inches in
length and weighs just 2.25 ounces. In addition to the bore tool, caliber adapters with all necessary fitting screws and a daylight target, the LaserLyte
system also includes a calibration adjustment wrench and plastic molded carrying case with complete instructions.
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT <5mw
WAVELENGTH 630-670nm
CLASS IIIa PRODUCT
Universal STANDARD & Super-Bright Laser Bore Alignment Kit
LBS-0006-140 Universal Super-Bright Laser Bore Alignment Kit
BAK-55NC-140 Universal Laser Bore Sighter Kit
Both kits come complete with 4 adapters (covering any
caliber from .22 cal. to .50 cal.), carrying pouch, batteries
and instructions.
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT <5mw
WAVELENGTH 630-670nm
CLASS IIIa PRODUCT
.22 caliber rifle barrel with laser bore tool installed.
12–20 GAUGE BORE ADAPTER
• The patented (U.S. Patent No. 6,421,947) one-piece
design Laser Bore Tool is precision CNC machined from
aircraft aluminum and hardened with a very durable
finish to maintain the precision surfaces. Each unit
is calibrated at the factory, utilizing high-precision
alignment tooling.
• Length is 6 inches and .625 diameter at head, weighing
only 1.2 ounces. It can easily be packed and taken to
camp for a quick check of sights. It operates on (3)
inexpensive A-76 type batteries, which power the laser
for over 1.5 hours of continuous use.
DLT-0006-000
For use with any LaserLyte Bore Sighter, the Daylight Laser Target is made from a special reflective material that allows you to see
the Laser dot even in direct bright sunlight. The target has a pressure-sensitive adhesive back that allows it to be applied to a hard
fixed surface or directly to the back of the supplied data sheet. Using the data sheet, the position of the Laser dot can be recorded
for multiple firearms and/or ammunition, after they have been sighted in at the range. Knowing where the exact location of the dot
is after final sighting-in gives you the ability to check your sights anywhere at any time without firing your gun. It’s printed with a
1-inch bull and 1-inch grid, and when used with the data sheet, it can be rolled up and carried along with your laser bore sighter.
• Quickly sight in any rifle or pistol from .22 to .50
caliber with this single universal kit (12 to 20 gauge
shotgun adapter also available). It comes complete with
4 adapters to adjust across all these caliber ranges.
Simple and very easy to use, this Laser Bore Alignment
Kit allows the adjustment of any scope or iron sights to
within a couple of inches of bull at up to 100 yards.
• Available in Standard 650nm and Super-Bright 635nm
models, the internal laser module utilizes a special lens
system to produce the smallest, brightest and most
concise dot for extremely accurate adjustment.
DAYLIGHT LASER TARGET
BAK-1220-300
NEW
NEW LASER
SCOPE LEVELER
SLA-0001-140
See back page for more details.
12–20 Gauge Adapter and expansion plug, which
threads onto the back of the laser bore tools.
• This adapter works with the Universal Super-Bright Bore Alignment Kit, the Hi-Precision
Universal Laser Bore Sighter and the Universal Laser Bore Sighter to allow the quick and easy
sighting-in of any 12–20 gauge shotgun.
• Made from CNC machined Dupont Delrin®, the adapter holds the same accuracy as the laser
bore tools and will not mar your shotgun bore. Comes complete with instructions.
.17­ –.22 Caliber LASER BORE SIGHTER
• Here’s a LaserLyte Laser Bore Sighting Kit designed to work with the new and very popular .17 caliber firearms. Each kit includes 2 adapters to
work with any caliber from .17 to .22, including .204, etc.
• This unit is CNC machined from aircraft aluminum and Class 1 hard anodized for strength. It is 4.75 inches long and .625 in diameter at the
head, weighing less than 1 ounce. It operates on (3) inexpensive A-76 type batteries, which power the laser for over 1.5 hours of continuous use.
L B S -172 2-14 0
Each kit includes a laser bore tool, 2 adapters,
batteries, carry pouch, and instructions.
UNIVERSAL RAIL-MOUNT LASER SYSTEM
Laser System Specifications
Pistols:
Fits most pistols with an integrated Picatinny or Weavertype rail system. This laser sight will also fit all adapters for
pistols that provide a Picatinny or Weaver-based rail system.
Long Guns:
Fits all rifles, carbines and shot guns with a Picatinny or
Weaver-based rail system.
Available in matte black finish, the system,
including laser, is less than 2-1/4 inches long, and
weighs just 1.2 ounces with batteries.
WEIGHT ............................................ 1.2 ounces with batteries
LENGTH ........................................... less than 2-3/4 inches
POWER OUTPUT ............................... <5mw continuous
MODULE (Standard) ....................... 650nm module
MODULE (Super-Bright) ................. 635nm module
RANGE (Standard) .......................... Up to 500 yards at night
RANGE (Super-Bright) . .................. Up to 1000 yards at night
BATTERIES . ..................................... (3) A-76 type (included)
BATTERY LIFE .................................. Over 1.5 hours continuous
BEAM SIZE . ..................................... Approx. 3 inches @ 100 yds.
ADJUSTMENT ..................................10 foot movement for windage
and elevation @ 100 yards
Laser Rail-Mount System
with Straight Cord Switch
Laser Rail-Mount System
shown with slide switch
L aser Rail-Mount System
with Curly Cord Switch
LRS-0650-SSWLaser Rail-Mount System
with Slide Switch
• LaserLyte’s Laser Rail-Mount Systems have been designed to fit virtually all Weaver/Picatinny type handgun rails and mounting
bases. They are being offered in several configurations, including a wireless ambidextrous slide switch, a 6-inch straight cord
with pressure switch, and an extendable curly cord with pressure switch. The laser sights in these systems are available with our
Standard 650nm laser module and our Super-Bright 635nm laser module.
LRS-0635-SSWBright Laser Rail-Mount
System with Slide Switch
LRS-0650-CCWLaser Rail-Mount System
with Curly Cord Switch
• This Lasersight utilizes a unique claw-type system that securely attaches the laser sight to the pistol’s mounting rails. To install,
just slide the mount on the mounting rails and tighten with included hex wrench.
LRS-0635-CCWBright Laser Rail-Mount
System with Curly Cord Switch
• LaserLyte’s new Universal Rail-Mount is precision CNC machined from aircraft-grade aluminum for maximum strength and durability.
With laser, it measures less than 2-3/4 inches long with the Rail-Mount and weighs only 1.2 ounces, including batteries.
LRS-0650-SCS
Laser Rail-Mount System with
Straight Cord Switch
LRS-0635-SCSBright Laser Rail-Mount System
with Straight Cord Switch
• The laser features a two-screw windage and elevation adjustment for easy zeroing. The laser module produces the maximum power
output for a class IIIa product and utilizes a special lens system to produce a very small, precise and extremely bright dot.
Simply slide mount on pistol rail and tighten mounting screws.
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT <5mw
WAVELENGTH 630-670nm
CLASS IIIa PRODUCT
QD LASER SYSTEM For GLOCK, BERETTA,
HK P2000, Taurus PT 24/7, S.A. and
SMITH & WESSON SW99 Pistols With Mounting Rails
• LaserLyte’s Quick Detachable Laser System attaches quickly and securely to Glock, Beretta, Springfield Armory, Taurus, HK and Smith
& Wesson SW99 pistols with rails.
• The QD mount utilizes two cross locking pins to securely attach the laser sight to the pistol’s mounting rails. The two cross locking
pins are operated by two buttons; when depressed they release the lasersight for quick removal. To install, depress buttons, slide the
mount on the mounting rails and release buttons.
• Precision CNC machined from Dupont Delrin® (a high wear resistance polymer), the QD mount allows for great repeatability and will
not mar the finish of any firearm.
QDL-65GB-730: Standard Laser Fits Glock,
Beretta, Springfield Armory & HK P2000
QDL-63GB-730: Super-Bright Laser Fits Glock,
Beretta, Springfield Armory & HK P2000
QDL-65SW-730: Standard Laser Fits
Smith & Wesson SW99 & Taurus PT 24/7
QDL-63SW-730: Super-Bright Laser Fits
Smith & Wesson SW99 & Taurus PT 24/7
• This mount includes our universal laser module (in Standard or Super-Bright models) with an ambidextrous end cap slide switch. When
installed, the position of the switch is directly in front of the trigger guard allowing for easy one-handed operation. The mount with
laser weighs only 1.8 ounces.
HK P2 000
Laser System Specifications
WEIGHT ....................................... 1.8 ounces including batteries
POWER OUTPUT .......................... <5mw continuous
MODULE (Standard) .................. 650nm diode
MODULE (Super-Bright) ............ 635nm diode
RANGE (Standard) ..................... Up to 500 yards at night
RANGE (Super-Bright) . ............. Up to 1000 yards at night
BATTERIES . ................................ (3) A-76 batteries (included)
BATTERY LIFE ............................. Over 1.5 hours continuous
BEAM SIZE . ................................ Approximately 3 inches at
100 yards
ADJUSTMENT ............................. 10 foot movement for windage
and elevation at 100 yards
TAURU S PT 24/ 7
GLOC K 19
SPRIN GFIELD ARMORY X-D
BERETTA 92 FS
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
Includes laser module with batteries and all
tools and mounting hardware needed.
Simply depress the button on side of mount
to attach to rail.
POWER OUTPUT <5mw
WAVELENGTH 630-670nm
CLASS IIIa PRODUCT
SMIT H & W ESSON S W99
UNIVERSAL PISTOL
LASER STANDARD &
SUPER-BRIGHT WITH
REMOTE SWITCH
Universal Rifle & Shotgun Laser System
UNIVERSAL PISTOL
LASER STANDARD &
SUPER-BRIGHT WITH
WIRELESS SWITCH
The Universal Rifle and Shotgun Laser System is offered in both our Standard 650nm laser and the Super-Bright 635nm laser.
Each system includes 2 sets of clamps, which allow the mounting of the Laser to any 1/2- to 1-inch barrel or magazine tube.
The Laser comes with a curly cord remote switch, extendable from 10 to 36 inches. The laser is only 2 inches long and with
the mount weighs less than 3 ounces. Each laser is easily adjusted for zero with both a windage and elevation screw. Each
system comes complete with laser, batteries, mounting hardware and instructions.
DANGER
Laser System Specifications
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
WEIGHT ....................................... 1.2 ounces with batteries
LENGTH ...................................... less than 2-3/4 inches
POWER OUTPUT .......................... <5mw continuous
MODULE (Standard) .................. 650nm module
MODULE (Super-Bright) ............ 635nm module
RANGE (Standard) ..................... Up to 500 yards at night
RANGE (Super-Bright) . ............. Up to 1000 yards at night
BATTERIES . ................................ (3) A-76 type (included)
BATTERY LIFE ............................. Over 1.5 hours continuous
BEAM SIZE . ................................ Approx. 3 inches @ 100 yds.
ADJUSTMENT ............................. 10 foot movement for windage
and elevation @ 100 yards
POWER OUTPUT <5mw
WAVELENGTH 630-670nm
CLASS IIIa PRODUCT
R LS - 0650 -140 & RLS - 0635 -140
• Each of our Universal Pistol Lasers features a two-screw windage and
elevation adjustment for easy zeroing. The laser module produces the
maximum power output for a class IIIa product and utilizes a special
lens system, to produce a very small, precise and extremely bright dot.
Laser Bow Mount System
BLS-0650-140 & BLS-0635-140
• The Universal Pistol Lasers with Remote Switch are available in both
black and silver finish.
• Each laser comes complete with 24 pre-shaped polymer inserts to fit
virtually all handguns. The remote pressure switch models come with a
self-adhesive mounting pad for placement of the switch. CNC machined
from aircraft aluminum, it measures less than 2-3/4 inches long with
the mount and weighs only 1.2 ounces.
PLR-0006-140 Black Remote – PLR-0006-090 Silver Remote
BLR-0007-140 Super-Bright Black Remote
BLR-0007-090 Super-Bright Silver Remote
PLW-0006-140 Black Wireless – PLW-0006-090 Silver Wireless
BLW-0007-140 Super-Bright Black Wireless
BLW-0007-090 Super-Bright Silver Wireless
This simple yet very effective Bow Laser System attaches to any stabilizer from 1/2- to 1-inch in diameter.
It is offered in both our Standard 650nm laser and the Super-Bright 635nm laser. Each laser comes with
a remote pressure switch attached to a 6-inch straight cord. This allows the placement of the switch to
the grip area of the riser for easy activation. The laser is easily adjusted for arrow impact at a specific
yardage with the windage and elevation screws. Each system comes complete with laser, batteries,
mounting hardware and instructions.
Mounts easily to bow stabilizers.
NEW LASER SCOPE LEVELER
SLA-0001-140
LaserLyte’s new Laser Scope Leveler provides the ultimate in scope mounting precision for the highest level of sight-in consistency. Designed to be used with
any LaserLyte Laser Bore Sighter, this unique accessory assures that the reticle is “square” before you tighten the scope in its mounts.
Simply attach the Laser Scope Leveler to a Laser Bore Sighter, insert in bore and you can match the horizontal crosshair to the projected horizontal laser beam.
Tighten scope mounts and then you’re ready for sight-in!
Scope’s windage and elevation adjustments
require the reticle crosshairs to be level–or
square–for exact sight-in accuracy.
The Line Generating Lens converts the bore sighter’s precise laser beam into an exact projected horizontal line
for aligning the reticle crosshairs.
The Laser Scope Leveler integrates a bubble
level to provide a benchmark for squaring
up your scope and rifle.
A Division of P&L Industries, Inc. • 101 Airpark Rd. • Cottonwood, AZ 86326 • Phone: (928) 649.3201 : Fax: (928) 649.3970 • www.LaserLyte.com