Brochure - Infinity Asset Solutions

Large Truck Box &
Trailer Manufacturer
430, rue Cantin Victoriaville (Quebec), Canada
2008
2010
Air Blow Mist Tooling
AMADA EMK3610NT CNC Turret Punch
Twin Spindle
NAKAMURA-TOME SC300 CNC Lathe
OVER $1M STORES INVENTORY • HUGE QUANTITY RAW MATERIAL • 2,000+ LOTS
460 Ton x 20'
CYBLEC CNC
AMADA PROMECAM Press Brake
2001
10' x ½"
HACO HSLX 3013, Hydraulic Shear
DAY 1: Wednesday Oct 29, 10:00 AM (ET) (Machine Tools & Production Equipment)
DAY 2: Thursday Oct 30, 10:00 AM (ET) (Stores Inventory, Raw Material, Rolling Stock & Vehicles)
Inspection: Tuesday October 28, 9 AM to 4 PM
Bid Live Onsite & Online Via
A U C T I O N S • L I Q U I D AT I O N S
FINANCING • APPRAISALS
905.669.8893
infinityassets.com
Like us at: facebook.com/
Infinity-Asset-Solutions-Inc
Follow us at: twitter.com/
InfinityAssets
DAY 1 – AMADA CNC TURRET PUNCH
2008
Air Blow Mist Tooling
Low Hours
AMADA TURRET
FANUC 180i-PB CNC
Bid Live ONSITE or ONLINE at
2008 AMADA EMK3610NT CNC Turret Punch With FANUC
180i-PB CNC Control, 33 Ton Capacity, Travels: X-98.43”,
Y-60.03”, (58) Station Turret With (2) 4-1/2” & (2) 1-1/4”
Auto-Index Stations, Brush Table, 60” x 100”/196.85”
Maximum Sheet Size (Without/With Repositioning), 0.187”,
Maximum Sheet Thickness, 330 Lbs. Maximum Sheet
Weight, 1.465” Maximum Ram Stroke, 30 R.P.M. Turret,
328/262 F.P.M., AIRBLOW V-EX Mist Tooling, Parts
Conveyor, 22HP, 200/200 Volts, 3 Phase s/n 36102203
2008 AMADA TOGU III
Turret Punch Tool
Sharpener And Grinder
With Full Enclosure,
6-1/2" 3-Jaw Chuck,
Coolant, s/n 30230938
QTY of AMADA MATE, Z-TOOLING, AIR BLOW, WILSON (Station A, B, C, D & Multi-Tool)
Tooling for Turret Punch
DAY 1 – LATE MODEL, LOW HOUR CNC LATHES
2010
Twin Spindle
2010 NAKAMURA - TOME
SC300 twin spindle CNC
lathe with FANUC 18iB
CNC Control (Upgraded
10.4” Color Screen),
13.78” Max Turning Dia.,
31.89” Distance Between
Opposed Spindles, Travels:
X-8.76”, Z-25”, B-19.66”
(Sub Spindle), 2.80” Bar
Cap., 12” Main Spindle
Chuck With 3,500 Rpm,
8” Opposed Sub Spindle
Chuck With 3,500 Rpm,
12 Station Turret With Live
Tooling, Tool Presetter,
Parts Catcher, Chip Conveyor, KISAGE Coating On
Slides, (Only 1,580 Hrs.,
Great Condition) s/n
S311005
Only 1,580 Hrs
NAKAMURA-TOME TMC-35 CNC
Lathe With FANUC CNC Control,
25.69” Swing, 49.8” Between Centers,
10 Station Turret, 10” Chuck, 2.52”
Bar Cap., Tool Presetter, Chip Conveyor
s/n 0119
This brochure is meant merely as
a guide. Infinity Asset Solutions
makes no guarantee, expressed
or implied, as to the accuracy of
the information in this brochure.
Buyers should inspect the goods
beforehand to satisfy themselves.
25.69" x 49.8" Cap.
3
DAY 1 – LARGE CAPACITY CNC PRESS BRAKES
460 Ton x 20'
CYBLEC CNC
1987 AMADA PROMECAM STPC406 CNC hydraulic press brake with 460 ton x 20ft 4in capacity, CYBLEC CNC 7000 control, 12.60”
stroke, 18ft 4” between housings, 25” throat (upgrade), 071 MS stopping time, SICK V4000 laser curtains s/n 60-0103
2000
110 Ton x 10'
Autobend 5 CNC
1988 AMADA PROMECAM IT2 100-30 CNC Hydraulic
Press Brake With 110Ton X 10ft Capacity, HURCO Autobend 5C CNC Control, 16” Throat, 102” Between Housings, 4.13” Stroke, SICK V4000 Light Curtains, 575V
3 Phase s/n 0449 70
4
55 Ton x 78.8"
Autobend 7 CNC Flat Die
2000 AMADA RG-50 CNC Hydraulic Press
Brake With 55 Ton X 78.8” Capacity, HURCO
Autobend 7 CNC Control, 59.9” Between
Housings, 3.94” Stroke, 14.58” Open Height,
15.75” Throat, SICK V4000 Light Curtains,
460V, 3 Phase s/n 509758
55 Ton x 78.8"
1998 AMADA PROMECAM RG-50-20
Hydraulic Press Brake With 55 Ton X 78.8”
Capacity, 66.75” Between Housings,
15.75”, 12" Open Height, Flat Die, s/n 114
AMADA Press
Brake Tooling
DAY 1 – HYDMECH BANDSAWS & SHEAR
2003
Hydraulic Bundling
2003 HYDMECH H-18A Automatic Horizontal Bandsaw With E200 Digital Control,
18" X 18" Cap., 10 HP Blade Motor, 50-350 FPM, Hydraulic Bundling, Clamping
s/n B07031265
2001
1997 HYDMECH S-20A SERIES II, Automatic
Horizontal Bandsaw, Plc100 Control, 13" X 18"
Capacity, 1-1/4" Blade, 5 HP Blade Drive Motor,
75-400 Fpm, Hydraulic Bundling, Clamping s/n
810972
10' x 1/2" Cap.
1991 HYDMECH S-20A Automatic Horizontal
2001 HACO HSLX 3013, Hydraulic Shear With 10ft X 1/2" Cap., SC7 Front Operated Bandsaw With 13” X 18” Capacity, 1-1/4"
Blade, 5 HP Blade Drive Motor, 75-400 FPM,
Power Back Gauge, 39 ¼” Squaring Arm, Roller Supports, 575V s/n 69501
Clamping, s/n 10991558
5
DAY 1 – VERTICAL CNC MACHINING MILLS
1998
MATSUURA MC-1000VS CNC Vertical Machining
Center With FANUC CNC Control, 19.5” X 55"
Table, Travels: X-41.38”, Y-19.63”, Z-22", CAT 50,
35 ATC, 3600 RPM, 25 HP Spindle Motor (Rebuilt
2011) 220V, 3 Phase s/n 85024403
1998 MATSUURA MC-800VG CNC Vertical Machining Center With Yasnac CNC Control,
20” X 45” Table, Travels: X-31.5", Y-20", Z-20", Bt-40 Taper, 24 ATC, Chip Conveyor,
10/15 HP, 200/220 V, 3 Phase s/n 980313360
1997
HURON Style
TOS Vertical Mill With 15.75” X 55” Table, 1,800
RPM, Power Feeds, With DRO
$175K Replacement
6
29.5" x 154" Table
1997 KIHEUG KMB-U-H7 Universal Mill With HEIDENHAIN DRO, 29.5” x 154” Table,
1989 JAROCIN FWF 32J universal mill with
Travels: X-126”, Y-39.37”, Z-31.5”, 8800Lbs Table load, Ball Screw XYZ, Weighs
12.5” x 51” table, ACU-RITE MILLVISION readout
33,000 Lbs, 50 Taper, Vertical Head, 18-1,300 RPM, 15HP, 220V 3 Phase s/n
s/n 0119
7090501
DAY 1 – BORING MILL & LATHES
4" Spindle
UNION BFT90-3 table Type
Horizontal Boring Mill With 4"
Spindle, 50 Taper, Facing Head,
55" X 49" Built In Rotary Table,
Travels: X-63", Y-49", Z-63",
1,600 RPM, 15 HP, Facing Head,
ACURITE DRO, Pendant Control
s/n 0287
Bid Live ONSITE or ONLINE at
3 Axis DRO
2008
29" x 122" Cap.
BENIGN Gap Bed Engine Lathe With 24” Swing, 86” Between Centers,
12” Chuck, 2,000 RPM, DRO, 3” Bore, s/n 0267 s/n 071
TOS SN71C/3000 Gap Bed Engine Lathe With 29” Swing, 122” Between Centers, 12”
Chuck, 1,000 RPM, 3” Bore, DRO, 2 Steady Rests
4" Bore
TOS SN 50 Gap Bed Engine Lathe With 21” Swing, 98” Between Centers, 16”
Chuck, 2” Bore, DRO, 2,000 rpm, Steady Rests
SIRCO PA20 Gap Bed Engine Lathe With 22” Swing, 68” Between Centers, 4” Bore,
1,500 RPM DRO
7
DAY 1 – ELECTRONIC DRIVESHAFT BALANCING MACHINE
DIA Tooling
DIA CE 502 VS Electronic Dynamic Balancing Machine With 450 RPM For Shafts And 900 RPM For Propeller Shafts And Rotors, Weld
Unit, Large Qty Of Attachments And Tooling s/n 10182
PLATE ROLLS & DEBURR
8' x 1/4" Cap.
2007
D-BUR-R Machine With 4 Rolls, 1.25” Track
2007 METALEX FPR-0806 Hydraulic Horizontal Initial Pinch Plate Rolls with Air Drop,
600V 3 Phase s/n 961001
2007 ATLAS COPCO
GA55VSD 75HP
Rotary Screw Air
Compressor With
18,366 Hrs., s/n
AP1574461
8
2001 ATLAS
COPCO GA37,
50HP Rotary
Screw Air
Compressor
With 16,350 Hrs.,
DAY 1 – LARGE QTY OF WELDERS AND SUPPORT EQUIP.
25+ Available
MILLER, HOBART, CANNOX Boom Welders With Wire Feeds
2001 INECO QB-76 VDE Tube Bender With Up To 3" Cap.,
With Dies s/n 76C330
8 Available
PLYMOVENT Welding Exhaust Units With Flexmax 12ft Arms And Blower,
50kg Cap., Self-Contained Units
KAO MING KMR-700DS Radial Drill With
1,500 RPM, Box Table
PROMECAM 25 ton horizontal
VERSAPRESS with 17” stroke,
31.5” x 23.5” work area
Varible Angle
JOSHUA HEAP Power Threader With Up To 3" Capacity s/n 965T TOS BPH 300 12" x 39.5” Surface Grinder, s/n 0211138
AMADA VERSA 206 Hydrolic Notcher With
1/4" Sheet Thickness, 8"x8" Knife
9
DAY 1 – MASSIVE 2,000 LOT SALE –
10
NOT TO BE MISSED! BID ONLINE OR ONSITE.
11
DAY 2 – OVER $1 MILLION
OF STORES INVENTORY
12
To Include TIMKEN, NTN, McGill, TORRINGTON Bearings, 10 New Gas Motors Up To 32 HP
(HONDA GX690, PERKINS And Various Brands, 3 & 4 Stroke) Bearings, Drive Train Components,
Chains, Slings, Fittings, Cylinders, Nuts, Bolts, Hoists, Carbide Tooling, New Tires And More.
13
DAY 2 – MATERIAL HANDLING & ROLLING STOCK
DREXEL SL43FSS 4000 Lbs. Cap. Swing Mast Forklift s/n 025
DREXEL SL66 7,000 Lbs. Swing Mast Forklift
TCM FRHB18-6 Electric Reach Truck s/n 78001694
2003 JLG 1932 E2 Platform Lift s/n 0200113115
TOYOTA 7,400 lbs. LPG Forklift, Side Shift
MASSEY FERGUSON 7,000 Lbs. Cap. Outdoor 4x4
Forklift And Attachments
2010
40,242 KMS
Motorized Track Mount Scissor Lift With 11ft 4” X 72” Lift Area
HARDY Material Roll Out Racks
2010 FORD Van/Truck, VIN NM0LS6ANAZAT033924
2009
As New As 2010
RAMEC Dump Trailer, 16ft x 6ft VIN 2E9US52E9AC072147
2011
Partial View Of Pickup Trucks
14
Also: Box Trailers, Shuttle Trailers And More
HUGE OFFERING OF RAW MATERIAL, WIP & SCRAP METAL
To Include Plate Sheet, Bar, Angles, Tube, Checker Plate, I-Beam Of Various Grades Of Steel And Aluminum,
Stainless, Wire Mesh, Various Steel Incomplete Projects Stored In Yard.
15
DAY 1 – CRIMPING DEPART. & SUPPORT EQUIP.
Complete Department To Include: (2) GATES POWER CRIMP 707, PARKER, DAYCO Crimpers, EATON SYNFLEX MARKV Coupling Swaging Machine, Huge Assortment Of Dies And Fittings Etc.
(2) ECO SR30V & PRO TEK Solvent Recyclers s/n 0251
CHEN Slotter With 25” Dia. Rotary
Table s/n 82058
TENCO 60"x30" Bailer
BAUTOR 110 Ton OBI Press, Air Clutch
View of 50+ MILLER,
ESAB, CANOX, HOBART,
MEMCO Welders
Shipping
Containers
TERMS OF SALE
DIRECTIONS: To 430, rue Cantin, Victoriaville (Quebec), G6P 7E6
Payment: All payments must be in Cash, Certified Funds, Wire Transfers, or
Company Checks, which must be accompanied with a bank letter guaranteeing
irrevocable payment to Infinity Asset Solutions Inc.
All Online bidders must register on Bidspotter by 5pm Tuesday October 28.
A 15% buyers premium will be added to all onsite purchases (18% Online).
A $500 refundable security deposit is required upon onsite registration ($2,000 Online).
A 25% deposit is required at time of purchase, balance due by 4pm Friday October
31st, 2014. NO EXCEPTIONS.
All goods are sold “As Is, Where Is”, ALL SALES ARE FINAL. All subject to prior sale.
Complete terms and conditions including removal procedures, are available on our
website, will be posted at the auction and will be provided at the time of registration.
From Québec City Jean Lesage International Airport: (Approx. 1 Hr 15 Mins)
Take Autoroute Duplessis/ Autoroute 540 S to QC-162 O/QC-263 S in SaintLouis-de-Blandford. Take exit 235 from Trans-Canada Hwy W, Follow QC-162 O
to Rue Cantin in Victoriaville. Destination will be on the Right.
From Montréal-Pierre Elliott Trudeau International Airport: (Approx. 1 Hr 40 Mins)
Take Autoroute Côte-de-Liesse/Autoroute 520 E to Trans-Canada Hwy to
Autoroute 955 S in Sainte-Eulalie. Take exit 210 from Trans-Canada Hwy.
Follow Autoroute 955 S and QC-122 E to Rue Cantin in Victoriaville.
Destination will be on the Right.
All items by Wednesday November 5, 2014. Hours: Monday – Friday between 8 am
– 4 pm. No items may be removed during auction. NO EXCEPTIONS.
This brochure is meant merely as a guide. Infinity Asset Solutions makes no
guarantee, expressed or implied, as to the accuracy of the information in this
brochure. Buyers should inspect the goods beforehand to satisfy themselves.
Member In Good Standing Of:
AUCTIONS • LIQUIDATIONS • FINANCING• APPRAISALS
infassets.com
63 Maplecrete Road, Concord, Ontario L4K 1A5 Canada
infinityassets.com • Tel: (905) 669-8893 • Fax: (905) 669-7512
Printed in Canada
REMOVAL TIMES