View the Fan Distributors 2010 Catalog

Transcription

FAN DISTRIBUTORS
Specialists In Air Moving Equipment
Stock Catalog
$3.00
JUNE 2010
FANS – BLOWERS - ACCESSORIES
INDEX
FANS
All Items in
Stock
For Same Day
Ship or pick-up
-PricesSubject to
Change Without
Notice
-FreightF.O.B.
Cambridge, MA
Page
Attic…………………………..1,3
Bathroom……………………5,6,7,8,9
Belt Drive Prop……………..2,3,10,29
Ceiling……………………….7,9
Commercial Kitchen………17,24,27,28
Direct Drive Prop…………..1,4
Duct and Inline……………..5,7,10,21,22
Kitchen………………………5,6
Roof (Axial)…………………4,29
Roof & Sidewall Mounted:
Centrifugal Down-blast…..6,25,26
Centrifugal Up-blast………27,28
Supply……………………….2,5,7,21,22,24
Vent-Axia……………………4
Whole House……………….3
Motors, Pulleys & Belts…..32,33
Terminology, Hood Velocities.34
BLOWERS
Page
Acid, Chemical……………11,12,13,17,19,20
Backward Curve………….17
Inline………………………..21,22
Forward Curve:
Belt Drive…………………..15,22
Direct Drive………………..7,11
Duct, Inline………………...7,21,22
Material Handling…………12,13,14
Pressure……………………13,14
Supply Air…………………..21,22,24
MISCELLANEOUS
Motor controls…………….23
Roof Curbs………………...30
Shutters & Dampers……...31
Special Motors…………….16
Technical Info……………..1,32
Vibration Isolators………..23
Baldor - Cincinnati - Delhi – Fantech - FloAire
Marathon - Masterdrive – Panasonic - Peerless
Reversomatic – A.O. Smith - Triangle - Vent-Axia
55 REGENT ST ● CAMBRIDGE, MA 02140
TEL. 617-868-1310 ● FAX 617-864-3138
Email fandistr@verizon.net
Website www.fandistr.com
FloAire SHUTTER MOUNTED EXHAUST FAN
DIRECT DRIVE SERIES
AVAILABLE IN 12” THROUGH 24” BLADE DIAMETER.
CONTINUOUS DUTY MOTORS.
OSHA APPROVED BACKGUARD
STATICALLY & DYNAMICALLY BALANCED.
TOTALLY ENCLOSED MOTORS.
UL LISTED IN COMPLIANCE WITH UL 705.
.025”
CFM AGAINST STATIC PRESSURE
.05” .075” .10” .125” .15” .175”
815
763
708
653
587
501
419
1525
1525
1216
1120
1033
953
881
765
1/15
1075
1876
1684
1554
1323
949
751
636
509
1/4
1075
3212
2876
2675
2444
2198
2015
1832
1649
MODEL
NO.
HP
RPM
0”
SM12
1/30
1550
SM16
1/20
SM18
SM24
115/1/60
.20”
.25”
317
1444
1027
1
SPEED
•VARI.
SPEED
$348.
$378.
520.
550.
580.
610.
728.
758.
●With speed control (Do not slow fan so that shutter blades close more than half way).
Dimensions
Model
No.
A
B
C
D
E
F
G
H
J WO WT.
SM12
15-1/8 8
8
8
2-3/8 12 13
12#
SM16
19-1/8 12 3-9/16 9/16 3-9/16 12
9
2-3/8 16 17
15#
SM18
21-1/8 14 3-9/16 9/16 3-9/16 14 11-7/8
3
18 18-1/2 19#
SM24
27-1/8 20 3-9/16 9/16 3-9/16 20 12-5/8
3
24 25
3-9/16 9/16 3-9/16
60#
__________________________________________________________________________________________
Building & Room Air Change Rates
1
FloAire WPC FANS
BELT DRIVE
•
STANDARD GRAY ACRYLIC EPOXY FINISH
•
NON OVERLOADING PROPELLER
•
L50 BALL BEARINGS 200,000 HOUR LIFE
•
PRECISION BALANCED
•
AMCA CERTIFIED FOR BOTH SOUND & AIR PERFORMANCE
The WPC sidewall fans are ideal for general purpose exhaust applications
including garages, factories, warehouses, gymnasiums or any commercial - industrial area.
When ordering: Specify Model – Voltage – Phase – Accessories
Model
No.
C
WPC24 D
E
C
WPC30 D
E
F
D
WPC36 E
F
E
WCP42 F
F
WPC48 G
Bade
Size HP CFM
5500
1/3 6000
24” 1/2 6500
3/4 7000
7500
8000
8000
1/3 9000
30” 1/2 10000
3/4 11000
1.0 12000
11250
1/2 12500
36” 3/4 13750
1.0 15000
3/4 15000
42” 1.0 16500
18000
19500
1.0 20500
48” 1.5 21500
22500
23500
683/0.28
740/0.36
796/0.44
853/0.55
911/0.66
Static pressure in inches W.G.
.10”
.15”
.20”
.25”
.30”
.35”
RPM/BHP
719/0.33 757/0.38 799/0.45 841/0.52 882/0.60 922/.69
772/0.40 805/0.46 842/0.52 881/0.60 919/0.68
825/0.49 856/0.55 888/0.62 923/0.69
880/0.60 908/0.66 937/0.73
936/0.72
530/0.34
589/0.47
649/0.63
709/0.82
561/0.41
616/0.54
673/0.70
731/0.90
0”
.05”
649/0.24
708/0.31
767/0.40
826/0.49
885/0.61
943/0.74
500/0.29
562/0.41
625/0.56
687/0.75
749/.097
473/.042
526/0.57
578/0.76
631/0.98
400/0.56
440/0.75
480/0.97
344/0.80
362/0.93
379/1.07
397/1.22
415/1.39
595/0.49 629/0.57 663/0.67 696/0.78 728/0.89
645/0.62 675/0.71 706/0.81 736/0.92
698/0.78 725/0.88 752/0.98
753/0.98
497/0.48 521/0.55 545/0.63 569/0.72 595/0.83
548/0.64 569/0.72 590/0.81 612/0.90
598/0.84 618/0.93
421/0.66 443/0.76 465/0.88
459/0.85 478/0.96
362/0.93 380/1.08 393/1.19 404/1.28
379/1.06 397/1.22 410/1.35 420/1.45
396/1.21 413/1.37
413/1.37
Totally Enclosed and Two Speed Motors available see page 16. Model WPC54 available please inquire.
Dimensions
Model
A
B
D
*WO
WPC24
WPC30
WPC36
WPC42
WPC48
28
34
40
46
54
16.5
16.5
15.5
16.5
16.5
1
1
1
1
1.5
28.75
34.75
40.75
48.75
54.75
SINGLE SPEED Wall
1
3
Shutter
PHASE PHASE
$970.
1090.
1140.
1110.
1120.
1130.
1070.
1190.
1250.
1380.
1210.
1220.
1230.
1240.
1290.
1350.
1470.
1610.
1730.
1280.
1310.
1320.
1570.
1580.
190.
1830.
1940.
1680.
1710.
262.
$112.
120.
228.
Wall Sleeve With
Inlet Guard
WPC24
WCP30
WCP36
WCP42
WCP48
- $686.
- 760.
- 978.
- 1250.
- 1266.
*Wall Opening using wall sleeve.
FAN DISTRIBUTORS 617-868-1310
2
COMFORT COOLER WHOLE HOUSE FANS
A whole house fan which creates a cooling breeze throughout a home, with only one small
energy-efficient motor, will give comfortable cooling at a tremendous savings over air
conditioning. It is recommended to use a whole house fan when the temperature is 85º or
below, and your air conditioner on days above 85º, this reduce electric costs by as much
as 90%.
Ceiling Model
Wall Model
DIMENSIONS
A
B†
•C
115/1/60
2 SPEED
SHUTTERS
CEILING WALL
REQUIRED
NO JOIST CUT
CEILING SHUTTER EXHAUST AREA
MODEL
CEILING WALL
CC2422
V242
HP
1/4
RPM*
560
CFM
3700
30
4
15
$834.
$156.
$112.
#CSS24
$196.
8 SQ. FT.
CC3023
V302
1/2
460
6900
34
4
15
1030.
180.
120.
#CSS30
230.
10 SQ. FT.
CC3623
V362
1/2
415
10600
40
4
15
1070.
242.
188.
#CSS36
240.
12 SQ. FT.
CC4223
V422
1/2
410
12000
46
4
15
1080.
274.
230.
NOT AVAILABLE
16 SQ. FT.
*High speed. Low speed is 60% of high. †2” on wall fan. •13-1/2” wall fan and propeller extends 2.75” beyond “C” dimension.
CEILING SHUTTER DIMENSIONS
NO JOIST CUT SHUTTER DIMENSIONS
MODEL
FAN
SIZE
OUTSIDE
DIMESION
INSIDE
DIMENSION
FAN
MODEL SIZE
OUTSIDE
INSIDE
DIMENSION DIMENSION
AS10
24”
26” x 26”
24” x 24”
CSS24
24”
24” x 32”
22” x 30”
AS11
30”
32” x 32”
30” x 30”
CSS30
30”
32” x 35”
30” x 33”
AS16
36”
34” x 45”
32” x 43”
ICSS36
36”
32” x 43”
30” x 40”
AS18
42”
36” x 48”
34” x 46”
N/A
42”
____________________
Installs centered on joist with 16” or 24” centers.
FAN DISTRIBUTORS CALL 617-868-1310
3
Vent-Axia T
®
Series
VENTILATING FANS
Five Models Each In Four Sizes.
Window Model – Designed for single pane or insulated glass, most types of glass and
Material up 1-5/16” thick.
Roof Model – Low profile cowl suitable for horizontal, angled and vertical mounting positions.
Wall Model – Designed to fit most wall thicknesses using telescopic liners supplied with the unit.
Panel Model – Ideal for installing into partitions and ceilings. Can be connected to round duct.
Darkroom Model – Exhausts without letting in light.
Window Blade
Dia.
Model
6WW 6
7WW 7½
9WW 9
12WW 12
Rough
CFM
Watts Sones
Opening Low Med. High (Med.) (Med.)
7¼
8¾
10¼
13¼
Roof Blade Rough
Model Dia. Opening
6RF
6
7¼
7RF
7½
8¾
9RF
9
10¼
13¼
12RF 12
Darkroom Blade Rough
Dia. Opening
Model
6DR
6
7¼
7DR
7½
8¾
9DR
9
10¼
12
13¼
12DR
145
178
275
645
184
233
403
833
210 55
284 60
467 95
950 130
Low
CFM
Watts Sones
Med. High (Med.) (Med.)
116
178
275
593
147
233
403
767
172 55
284 60
467 95
873 130
Low
CFM
Med.
Watts
High (High)
118
194
268
512
141
244
371
612
156 55
312 60
427 95
622 130
Window Model
2.7
1.9
2.8
4.1
2.7
1.9
2.8
4.1
Sones
(Low)
2
1
2
3
Price
$794.
984.
1286.
1700.
Price
$884.
1130.
1430.
1900.
Price
$1030.
1318.
1644.
2162.
Wall Blade
Dia.
Model
6WL
6
7WL 7½
9WL
9
12WL 12
Rough
Opening Low
11¾x10⅛
13⅜x11¾
14⅞x13⅜
18 x 16½
Panel Blade Rough
Dia. Opening
Model
6PL
6 9⅛ x 9⅝
7PL 7½ 10⅝x11⅛
9 12⅛x12⅞
9PL
12PL 12 15¼x15¾
CFM
Watts Sones
Med. High (Med.) (med.)
158
196
302
697
205 233 55
257 313 60
443 513 95
900 1027 130
Low
CFM
Med. High
174
216
333
748
2.7
1.9
2.8
4.1
Watts Sones
(Med.) (med.)
225 257 55
282 344 60
488 565 95
967 1108 130
2.7
1.9
2.8
4.1
Price
$1098.
1310.
1636.
2100.
Price
$856.
1046.
1350.
1806.
Controls
3 Speed surface mount (also reverses air flow)---------$230.
3 Speed flush mount (also reverses air flow)--------------270.
De-humidistat---------------------------------------------------------104.
Cooling thermostat (90ºf to 50ºf)--------------------------------- 60.
5 core wire, color coded (used with 3 speed control)-------4.10/ft.
Wall Model
Roof Model
Panel Model
Darkroom Model
4
FANTECH DIRECT DRIVE IN-LINE BLOWERS
All Fantech fans are used for heating or air conditioning boosting, remote mounted
bathroom and shower exhaust, kitchen range hood exhaust and general ventilation
or air supply applications.
FR Series Features
UV PROTECTED THERMOPLASTIC HOUSING
UL LISTED FOR OUTDOOR USE OR WET LOCATIONS
CAN BE USED IN TEMPERATURES UP TO 140ºF
Fan
Model
RPM
115V Duct
Amps Size
FR110
FR140
FR150
FR160
FR225
FR250
2761
2850
2411
2539
2964
2817
.67
.53
.78
1.09
1.28
2.08
4”
6”
6”
6”
8”
10”
0”
.2”
167
214
243
289
429
563
150
190
220
260
400
530
CFM vs Static Pressure
.4”
.6”
.8”
1.0”
133
162
196
233
366
493
113
132
170
206
332
456
88
99
142
179
297
419
63
46
114
154
260
381
1.5”
•Vari
(2)
MGE
Fan Speed Damper Clamps Grille
89
168
294
$308. $348.
316. 356.
316. 356.
400. 440.
518. 558.
590. 630.
$34.
44.
44.
44.
64.
84.
$34.
42.
42.
42.
46.
54.
• Fan with speed control.
#DB 10 DRYER BOOSTING SWITCH - $138.
Model
A1
A2
C
D
E
F
FR110
FR140
FR150
FR160
FR225
FR250
3⅞
5⅞
5⅞
5⅞
7⅞
-
5
6¼
6¼
6¼
10
10
9½
11¾
11¾
11¾
13¼
13¼
6⅛
5⅞
5⅞
6⅜
6¼
6¼
⅞
1
1
1
1½
1½
⅞
⅞
⅞
⅞
1½
-
For Fan #’s FR110, FG4XL & RVF4. Positive pressure
switch turns fan on for ten minute cycle.
FG Series Features
GALVANIZED STEEL HOUSING
UL LISTED UNDER STANDARDS 507 AND 705 FOR
CONDITIONED AIRSTREAMS OF UP TO 140˚F
USED EXTENSIVELY FOR RANGE HOOD EXHAUST
Fan
Model
RPM
115V Duct
Amps Size
FG4XL
FG5XL
FG6XL
FG8XL
FG10XL
2750
2700
2900
2950
3100
.66
.68
1.48
1.45
1.96
4”
5”
6”
8”
10”
●Fan with speed control.
Model
A
C
FG4XL
FG5XL
FX6XL
FX8XL
FX10XL
9¾
4
9¾
5
13⅛ 6
13⅜ 8
13⅜ 10
D
0”
170
220
483
502
589
0.1”
0.2”
0.4”
0.6”
0.8”
1.0”
1¼”
1½”
Fan
•Vari
Speed
160
205
466
486
574
150
190
450
470
560
134
160
409
428
531
63
66
243
266
400
40
41
201
218
355
$292.
296.
400.
490.
560.
$332.
336.
440.
530.
600.
119
135
369
388
503
103
112
329
351
472
For accessories see FR series.
E
7
1
6
1
6⅝ 1
6 1⅛
5⅞ 1⅛
F
1
1
1
1⅛
1
FAN DISTRIBUTORS 617 868-1310
5
86
91
289
313
441
$38.
54.
54.
54.
72.
-
FANTECH ROOF FANS
DIRECT DRIVE
RE Series Features
CAN BE MOUNTED ON THE ROOF OR WALL
PAINTABLE, BAKED POWDER COATED FINISH
PERMANENTLY LUBRICATED SEALED BALL BEARINGS
Fan
Model
0”
1/8” 1/4”
3/8” 1/2” 3/4” 1.0” 1½”
2.0”
227
409
753
213
382
738
184
331
705
43
467
115V Duct
RPM Amps Size
RE 6
2700
RE 8XL 2850
RE 10XL 3250
.80
1.36
3.61
6”
8”
10”
199
356
721
169
307
690
134
259
656
•Fan with speed control
106 51
212 130
622 548
2½
Fan
•Vari
Speed
383
$400.
576.
946.
$440.
616.
986.
See FR series for dampers and grilles
Dimensions
Model
A
RE 6
RE8XL
B
C
D
6 15½
13-3/16
6½
8
20
15¾
6
RE10XL 10 20
19¾
11¾
RVF Wall Series Features
BAKED, POWDER COATED FINISH
SUITABLE FOR AIRSTREAM TEMERATURE UP TO 140ºF
MOUNTS NEATLY ON EXTERIOR WALLS
115V Duct
Amps Size
0”
RVF 4XL 2700
.84
4”
193 180 172
154
136
118
91
RVF 6XL 3000
1.46
6”
381 360 346
315
285
258
213
RVF 8XL 2900
1.42
8”
435 410 392
348
312
282
235
Fan
Model
RPM
.1”
.2” .4” .6” .8”
1.0”
•Fan with speed control.
Fan
•Vari
Speed
$344.
$384.
64
476.
516.
102
540.
580.
1.5”
Refer to FR Series for dampers and grilles.
Dimensions
A
Model
RVF 4XL 13
B
C
D
E
F
G
H
J
10¼
2⅞
6
5¼
5
1
2½
4
RVF 6XL 17
14¼
2⅞
6
7¼
7
1
2½
6
RVF 8XL 17
14¼
2⅞
6
7¼
7
1
2½
8
6
FloAire CEILING & INLINE FAN
ADJUSTABLE AIR FLOW
DECORATOR DELUXE GRILLE IS STANDARD
ECONOMICAL – EXCELLENT VALUE
EASY TO INSTALL AND MAINTAIN
LOW SOUND LEVEL - INSULATED CABINETS
DISCHARGE CAN BE CHANGED IN THE FIELD - 90º or 180º
Model
CFA100
Max 120v
Watts Amps RPM
88
SP
650 CFM
Sones
1.0
0”
.125”
138
0.7
112
1.0
.250”
.375”
.500”
98
1.3
80
1.8
67
2.0
.625”
.750”
46
2.8
Fan
Price
Speed
Control
$234.
$32.
Inline
Wall Sloped
Adapter Cap Roof Cap
#961L
$46.
CFA150 100
1.2
1550
CFM
Sones
179
1.4
160
1.6
149
2.0
142
2.5
133
3.0
122
3.3
105
3.6
250.
32.
CFA200 124
1.6
1050
CFM
Sones
224
1.5
207
2.0
197
2.3
187
2.7
179
3.4
167
4.0
144
4.5
306.
32.
CFA300 204
2.6
1050 CFM
Sones
319
2.6
313
3.0
306
3.4
299
3.6
288
3.9
274
4.4
251
4.7
334.
32.
CFA400 137
1.3
1550
CFM
Sones
480
2.0
434
2.3
388
2.8
344
3.3
299
3.8
229
4.5
114
4.8
520.
32.
CFA500 207
2.0
1050
CFM
Sones
538
3.0
514
3.3
491
3.6
463
4.0
434
4.4
389
5.0
339
5.7
580.
32.
#641
88.
#634
#981L
46.
CFA700 298
2.7
1050
CFM
Sones
722
4.5
701
4.7
667
4.8
640
5.0
607
5.2
571
5.6
534
6.2
628.
32.
CFA900 261
2.5
1550
CFM
Sones
918
3.8
901
4.1
877
4.0
842
4.2
793
4.3
725
4.4
636
4.9
736.
32.
#643
$60.
116.
#982L
66.
#613
#437
118.
214.
#983L
72.
CFA100 – 300 have plastic grilles. CFA400 – 900 have metal grilles.
CFA100 – 300
CFA400 - 900
B
A
A
DIA.
C
C
D
E
E
Dimensions
Model
B
Housing
A
B
C
D
Outlet
E F
G
CFA100-150 12¼ 12¼ 11¾
14
14
6” DIA.
CFA200-300 12¼ 12¼ 11¾
14
14
8” DIA.
23¼
14 18½
12
CFA400,
500, 700
& 900
21½ 12¼ 11¾
G
4½
8
E
7
Ceiling & Inline Fan Accessories
Roof & Wall Caps
Inline Adapters
FAN DISTRIBUTORS – 617-868-1310
8
Panasonic WhisperCeiling Fans
WhisperCeiling ENERGY STAR® rated exhaust fans
feature totally enclosed AC condenser motors for long-life, energy efficiency and quiet
operation. All models are super quiet, energy efficiency and easy to install for intermittent or
continuous run ventilation and comply with Green building IAQ standards.
Ceiling Fan
MODEL SONES
FV-05VQ3 <0.3
WATTS
12.9
AMPS
0.11
RPM
817
CFM
50
DUCT
SIZE PRICE
4”
$240.
FV-08VQ3
0.3
22.8
0.19
716
80
4”
256.
FV-11VQ3
0.8
30.7
0.26
810
110
4”
288.
FV-15VQ3
0.6
31.4
0.29
673
150
6”
384.
Housings are 7⅞” high
Ceiling Fan With Light
MODEL
FV-08VFL2
SONES
0.3
WATTS
25.2
AMPS
0.21
RPM
775
CFM
80
DUCT
SIZE PRICE
4”
$384.
FV-11VFL2
1.0
35.9
0.30
894
110
4”
424.
FV-15VFL2
1.2
35.7
0.30
790
150
6”
498.
Housings are 7⅞” high
9
CINCINNATI
TUBE-AXIAL FANS
BELT DRIVE
NON SPARKING CAST ALUMINUM BLADES FOR THE ELIMINATION
OF HAZARDOUS FUMES SUCH AS PAINT, CHEMICAL AND OTHER
VOLATILE ODORS.
SEALED BALL BEARINGS.
CAN BE MOUNTED IN ANY POSITION.
175º MAXIMUM OPERATING TEMPERATURE.
AIR TIGHT DRIVE COMPARTMENT.
TEFC & EXPLOSION PROOF MOTORS AVAILABLE.
INTEGRAL ROLLED FLANGES.
ADJUSTABLE MOTOR BASES.
USED EXTESIVELY FOR PAINT SPRAY BOOTHS.
TUBEAXIAL FANS ARE NOT SUITABLE FOR QUIET APPLICATIONS.
SPECIFY VOLTAGE AND PHASE WHEN ORDERING.
MODEL
NO.
B12C
B12D
B12E
B12F
B15C
B15D
B15E
B15F
B15G
B18D
B18E
B18F
B18G
B18H
B24E
B24F
B24G
B24H
B24J
B30G
B30H
B30J
B30K
B34G
B34H
B34J
B34K
HP
1/3
1/2
3/4
1
1/3
1/2
3/4
1
1.5
1/2
3/4
1
1.5
2
3/4
1
1.5
2
3
1.5
2
3
5
1.5
2
3
5
RPM
2195
2553
2988
3317
1875
2172
2500
2775
3215
1830
2115
2363
2722
3023
1240
1392
1631
1823
2074
959
1071
1230
1476
953
1061
1228
1472
1/8
1345
1600
1900
2120
2260
2710
3170
3550
4150
3375
3990
4515
5270
5900
6130
7025
8395
9485
10900
9995
11335
13225
16105
12745
14375
16855
20525
1/4
1170
1480
1820
2060
2050
2530
3015
2410
4035
3000
3700
4280
5065
5715
5555
6505
7945
9085
10545
9140
10585
12585
15575
11710
13510
16195
19960
3/8
1260
1695
1970
1710
2350
2860
3275
3915
2325
3345
3975
4850
5525
4815
5960
7510
8690
10190
7985
9810
11915
15040
10380
12480
15370
19390
1/2
5/8
3/4
2450
2990
3670
2765
3550
3005
4285
5175
1935
3865
4825
7885
9500
7345
9160
13915
13310
17985
17210
1865
2040
2700
3130
3795
1250
2700
3610
4575
5315
5200
7055
8295
9845
11240
14480
5525
11045
11580
18710
MODEL
NO.
A
B12
B15
B18
B24
B30
B34
12
15
18
24
30
34
DIMENSIONS
B
C
13-1/8
16-1/8
19-1/8
25-13/16
31-3/4
35-11/16
14-1/16
17-1/16
20-1/16
26-11/16
32-11/16
37-1/4
OPEN DRIPPROOF EXPLOSION PROOF
LIST PRICE
LIST PRICE
1 PHASE 3 PHASE 1 PHASE 3 PHASE
$1770.
$1920.
$2370.
$2340.
1900.
1880.
2410.
2370
1960.
1920.
2540.
2490.
1980.
1980.
2450.
2540.
1930.
2080.
2530.
2510.
2060.
2040.
2570.
2540.
2120.
2080.
2710.
2660.
2260.
2100.
2820.
2750.
2280.
2200.
2760.
2650.
2620.
2140.
2130.
2790.
2740.
2210.
2160.
2900.
2820.
2340.
2180.
2910.
2450.
2200.
3040.
2500.
2250.
2840.
2800.
3420.
3370.
2970.
2810.
3540.
3460.
3090.
2830.
3550.
3130.
2880.
3640.
2950.
3770.
4280.
4040.
3750.
4330.
4080.
4870.
4150.
4940.
4250.
5240.
5100.
4640.
4390.
5230.
4680.
4430.
5300.
4500.
5590.
4600.
See page 16 for TEFC motors.
D
BLADE
DIAM.
12
12
12
16
16
16
11
14
17
23
29
33
Standard: Cast Aluminum fixed pitch
props.
10
PEERLESS
DIRECT DRIVE UTILITY BLOWERS
FORWARD CURVE WHEELS
USED EXTENSIVELY FOR GENERAL VENTILATION OF DUCTED SYSTEMS.
BOILER ROOMS, RESTAURANTS, SMALL HOODS & RESTROOMS.
HOUSINGS & BASES ARE 16 GAUGE STEEL FINISHED IN BAKED ENAMEL.
EXPLOSION PROOF & TEFC MOTORS, ALSO SPARK RESISTANT WHEELS
ARE AVAILABLE. DISCHARGE CAN BE ADJUSTED TO EIGHT POSITIONS.
ALL UNITS ARE ASSEMBLED & TEST RUN.
See page 16 for Explosion Proof and TEFC Motor Additions
Model
No.
CFM
1/2”
RPM
0”
1/8”
1/4”
3/8”
D5A
1/4 1725
184
169
144
112
D6A
D6B
1/6 1140
1/4 1725
390
595
330
560
250
515
100
470
420
360
300
D8A
D8C
1/6 1140
1/3 1725
760
1150
680
1085
620
1050
535
1005
430
960
915
865
D9C
1/4 1140
1180
1160
1125
1090
1035
963
HP
5/8”
3/4”
1”
115V/1PH/60HZ
1 Speed 2 Speed
1-1/4”
750
3Ph.
1Spd
Ship
Wt.
$560.
$676.
$676.
25
810.
620.
740.
740.
30
850.
700.
860.
830.
40
1040.
-
1070.
65
1220.
85
580
3/4 1140
2060 1970 1870 1800
1710 1605 1500 1290 1020
D11E
1410.
SPEED CONTROL AVAILABLE FOR: D6AA, D8A & D9C, 115V. ADD $40. – SEE PAGE EXPLOSION PROOF MOTORS.
SEE OPTIONAL EQUIPMENT BELOW.
HIGH SPEED UTILITY BLOWERS
FOR USE IN HIGH STATIC PRESSURE SYSTEMS
Model
No.
HP RPM
1/2”
D9D
D9E
D9F
1/2 1725
3/4 1725
1 1725
X
X
895 810
X
X
X 1550
1720 1675 1620 1550
735
1445
1445
615
1290
1290
1100
1100
D11F
D11G
D11H
1
1.5
2
X
X
X
1465
1840
2415
1425
1730
2240
1280
1600
2130
1725
1725
1725
3/4”
1”
X
X
X
X
X
X
CFM
1-1/4” 1-1/2” 1-3/4”
X
1925
X
2”
2-1/4”
1120
1450
1990
2-1/2”
910
1280
1850
2-3/4”
Ship
Wt.
1 Phase
115/230V
3 Phase
230/460V
$960.
1030.
1160.
$920.
970.
972.
60
70
80
1190.
1150.
1340.
1000.
1020.
1060.
80
85
90
1040
1660
X will overload motor.
OPTIONAL EQUIPMENT
Mod. Drive Vib. Alum. Heat
Acid
NO. Cover Pads Wheel Slinger Resist
D5
D6
D8
D9
D11
Mod.
No.
$96.
96.
96.
96.
96.
$90.
100.
110.
130.
140.
$80.
80.
80.
80.
80.
$120.
120.
120.
130.
130.
Wheel
Size
A
B
OUTLET
x D
CC D
E
F
G
H
J
K
L
M*
N
O
INLET
P
D5
4.75 x 2.5
8⅜
7
5⅛ x 3⅜
3¾
6
1/2
3½
3⅛
3¾
4⅛
11½
3/8
2¾
4
4⅝
5¼
D6
6.25 x 3
9⅜
8
7⅜ x 4¼
4¼
7
1/2
5
4
6
5
11⅞
3/8
3⅛
6
7⅛
8½
D8
7¾ x 3-7/8 11
8
8¼ x 5⅜
5
7
1/2
6
4⅝
6¾
6⅞
12½
3/8
3¾
8
8
8½
D9•
9 x 4.5
12⅛
8
10¾ x 6½
5⅝
7
1/2
6¾
5⅝
7¾
7⅛
13
3/8
4⅜
9
9¼
9¼
9⅞
10-5/8x 5¼ 14¾
9
11¾ x 8
6⅞
7½
3/4
8
6¾
9⅛
8⅛
13⅞
3/8
5
10
10¾
11¾
D11•
*M DIMENSION WILL VARY WITH TYPE MOTOR USED.
11
$158.
158.
158.
160.
160.
R
X
•D9D WHEEL - 9x3, D11F WHEEL - 10-5/8x3, D11G WHEEL - 10-5/8x4
PEERLESS – RADIAL BLADE BLOWERS
DIRECT DRIVE
APPLICATION: Used on small kitchen hoods where filters may or may not
be installed; also used where air contains dirt, lint or foreign
material as wheel is self cleaning type.
FEATURES: 16 GAUGE STEEL CONSTRUCTION.
NON SPARKING CAST ALUMINUM SELF CLEANING WHEEL.
FINISHED IN BAKED ENAMEL.
EIGHT DISCHARGE POSITIONS AVAILABLE.
(SEE PAGE 15)
AMCA TESTED AND RATED.
MODEL
HP
NO.
RPM
0”
1/8”
1/4 ”
WHEN ORDERING: SPECIFY, MODEL – VOLTAGE – PHASE – ROTATION & DISCHARGE
CFM - AGAINST STATIC PRESSURE
Open Motor
EXP. PROOF
3/8” 1/2” 5/8” 3/4”
1”
1.25” 1.5” 1.75” 2” 2.25” 1 Phase 3 Phase 1 PH. 3PH.
KE-8
1/4
1725
550
510
470
425
365
275
KE-9
1/4
1725
880
825
765
705
635
565
480
200
KE-11
1/2
1725
1430
1380
1335
1275 1225 1165
1100
945
730
430
KE12
1
1745
2375
2300
2220
2140 2060 1975
1890 1700 1485
1185
750
350
KE14
2
1745
3420
3325
3230
3125 3025 2925
2820 2959 2350
2045
1620
1010
150
640
SEE PAGE
FEATURES:
General Construction – Housings and bases are 16-gauge
steel with welded joints. Wheels are cast aluminum, dynamically
balanced and are self cleaning to eliminate unbalance
or reduced airflow. Blowers are finished with baked enamel.
Custom Features – Weather proof drive covers to cover the
motor are available if unit is mounted outside. Also such
extras as vibration pads, discharge dampers, acid resisting
paint and other special features are available for special
requirements.
$500.
$660.
$980.
$1010.
520.
680.
990.
1030.
750.
820.
1310.
1280.
1270.
1090.
1900.
1860.
1530.
1250.
-
2100.
FOR OTHER SPECIAL MOTORS.
OPTIONS
Acid
2 SPEED MOTOR*
Model Motor Vib. Resis. 1 PHASE 3 PHASE
NO. Cover Pads Coat
KE-8
$100. $96. $120.
$120.
–
KE-9
110. 96.
130.
120.
–
KE-11
114. 96.
140.
180.
KE-12
130. 144. 160.
500.
530.
KE-14
130. 144. 180.
-680.
*1 PHASE – 1725/1140 RPM. 3 PHASE – 1800/900 RPM.
Rotation and Discharge
Standard units are clockwise rotation bottom horizontal
discharge as pictured in dimension diagram. However any
rotation or discharge will be furnished when so specified.
Housing and wheel rotation may be changed at time of
installation to any one of eight different discharge
directions.
BLOWER DIMENSIONS
MODEL
NO.
WHEEL
BORE
Outlet
A
B
11
Inlet
C
D
E
F
G
5-3/8
5
7
H
J
K
L
M*
KE-8
7¾ x 4
1/2
8
8¼
½
6
4-5/8 6¾
6-7/8
10¾
KE-9
9 x 5
1/2
12-1/8
8
10¾
6½ 5-5/8
½
6¾
5-5/8 7¾
7-1/8
11¾
KE-11 10-7/8x5-5/8
5/8
14¾
9
11¾
8
¾
8
6¾
9-1/8 8-1/8
13¼
KE-12
12½ x 7½
7/8
16-3/8 10½
8½
11½
KE-14
13½ x 8-1/8
7/8
17-5/8 10½ 14-5/8 10¼
13¼
7
6-7/8 7½
9-5/8 7-3/8 8¼
8
8¾
7/8 10-1/8
10½
7/8 11-1/8 9-3/8 125/8 11-3/8
N
O
P
R
3¾
8
14-5/8
8½
3/8
4-5/16
9
9¼
9-3/8
5-1/16
10
10¾
11¾
6-3/8
13¼
13¼
15-3/16 9/16
16¾
7
14½ 15-5/8
V
X
11-1/8
17
12¼
17
*M VARIES WITH MOTOR FRAME SIZE
12
PEERLESS
PRESSURE BLOWERS
DIRECT DRIVE
Pressure blowers are generally used on industrial
applications for small exhaust systems where air is
laden with dust or grit and also for supplying high
pressure air for conveying or cooling.
NON-SPARKING RADIAL BLADE ALUMINIM WHEEL
DYNAMICALLY BALANCED
ARC WELDED 16 GUAGE STEEL HOUSINGS
ODP, TEFC & EXPLOSION PROOF MOTORS AVAILABLE
AMCA TESTED AND RATED PERFORMANCE
WHEN ORDERING: SPECIFY, MODEL – VOLTAGE & PHASE - ROTATION & DISCHARGE
Model
No.
HP
RPM
1”
PW-8
1/3 3600
295
PW-9
1/3 3600
1½”
CFM – AGAINST STATIC PRESSURE
3”
3½”
4”
5”
6”
7”
8”
2”
2½”
265
230
200
165
125
525
495
470
440
405
380
330
200
800
770
740
705
680
640
600
500
400
300
860
780
9”
10”
PW-11
1
3600
PW-12
2
3600 1190 1160 1130 1100
1065 1030
1000 930
PW-14
5
3600 2280 2230 2180 2130
2070 2020
1960 1840 1720 1570 1400 1240 1080
690
575
11”
12”
410
880
670
OPEN MOTOR
1 Phase 3 Phase
$600.
$590.
620.
610.
880.
790.
1210.
1110.
-
1290.
OPTIONAL EQUIPMENT
Acid Explosion Proof
Model Motor Vib. Resist.
Motor
No.
Cover Pads Coat 1 Phase 3 Phase
PW-8 $100. $96.
$130. $300.
$ PW-9
110. 96.
130.
300.
PW-11 116. 96.
140.
800.
630.
PW-12 130. 144.
160.
960.
650.
PW-14 130. 144.
180.
950.
ROTATION AND DISCHARGE: Furnished for clockwise rotation, bottom horizontal discharge unless
otherwise specified. All models may be changed in
in the field for either rotation or any discharge
position.
Inlet
Outlet
13
PEERLESS HIGH PRESSURE BLOWERS
RADIAL BLADE – BELT DRIVE
ARRANGEMENT #10, COMPACT UNIT.
TYPE “M” WHEEL FOR SAWDUST & PARTICLE LADEN AIR.
300º OPERATING TEMPERATURE. UP TO 500º WITH HEAT SLINGER.
ADJUSTABLE PULLEY TO 10 HORSEPOWER .
PERFORMANCE RATINGS UP TO 20” STATIC PRESSURE.
MODEL HP
NO.
*RPM
F
G
M-09 H
J
K
1
1½
2
3
5
1761
1890
2020
2210
2560
1580
1840
2025
2380
1320
1585
1850
2200
1145
1410
1675
2025
F
G
M-11 H
J
K
1
1½
2
3
5
1850
1440
1515
1655
1885
1850
2235
2500
3025
3680
1570
1970
2235
2760
3420
1185
1580
1975
2500
3200
1320
1710
2235
3020
G
H
M-13 J
K
L
1½
2
3
5
7½
992
1210
1306
1470
1610
2750
3120
3680
4550
2210
2570
3305
4200
4960
1660
2210
2900
3850
4600
1830
2570
3490
4300
J
K
M-15 L
M
N
3
5
7½
10
15
1071 4400
1185
1300
1400
1570
3670
4890
5870
3200
4400
5380
6110
2690
3910
4890
5700
K
L
M-17 M
N
O
5
7½
10
15
20
985
1080
1155
1285
1400
5400
6700
7550
4750
6100
7000
8500
4200
5450
6500
7900
9200
L
M
M-19 N
O
P
7½
10
15
20
25
920
980
1090
1165
1240
7500
8630
10200
1”
3”
4”
5”
6”
8”
2”
986
1235
1500
1850
2465
700
1060
1400
1760
2300
1450
1975
2760
880
1230
1600
2200
1710
2630
2200
3200
4100
1750
2940
3700
3430
4600
5400
6600
2940
4160
5100
6360
3500
5030
6000
7540
8800
4400
5400
7100
8200
1320
1940
2235
6670 5890 5100 4400
7850 7100 6300 5890
9500 9050 8300 7850
11000 10300 9850 9300
11400 10990 10200
2210
3310
3420
4400
5650
4400
6350
7540
6670
8240
9420
See page 16 for special motors.
PRICE
DRIVE
10”
12”
1Ф
3Ф
COVER
$2980.
2950.
3170.
$2790.
2820.
2880.
3010.
3140.
3450.
3410.
3640.
3260.
3290.
3350.
3480.
3610.
4020.
4240.
2700
3890.
3960.
4150.
4210.
4490.
3500
5200
4400
4400
5210.
5270.
5550.
5830.
6610.
4400
5970
6010.
6290.
6650.
7200.
7860.
5900
7460
7530.
7890.
8440.
8950.
9360.
1760
1500
1835
5340
6800
5100
7060
8600
VIB.
PADS
Less Motor
And Drive
$290.
$144.
#R-1
BLACK
$2360.
350.
144.
#R-1
RED
$2840.
410.
168.
#R-2
BLACK
$3440.
520.
168.
#R-2
BLACK
$4500.
600.
168.
#R-2
BLACK
$5240.
720.
168.
#R-2
RED
$6470.
*@4.0” S.P. otherwise @ lowest S.P. shown.
Type “M” – Material Handling Wheel
Size
Wheel
Dia.
Shaft
Dia.
9
11
13
15
17
19
15⅝
19⅛
22⅝
26⅛
29⅝
33
1-7/16
1-11/16
1-15/16
2-3/16
2-3/16
2-7/16
A
B C D
E
F
17¼ 1 9 7½ 17⅝ 14½
21⅝ 1⅜ 11 91/16 17 19¾
21⅝ 1⅜ 13 10½ 17 19¾
25½ ⅞ 15 12⅛ 22½ 23¼
27 ⅞ 17 13¾ 22½ 24¾
29 ⅞ 19 15⅜ 24½ 26¾
G
H
J
K
135/16
16½
19½
22½
25½
28½
111/16
13¼
15⅝
18⅛
20⅝
22⅞
911/16
11¾
13⅞
161/16
185/16
205/16
123/16
14⅞
179/16
205/16
231/16
2511/16
L
M
N
1111/16 28½ 6⅞
13¾
30
7⅝
15⅞
31
8⅜
191/16 363/16 93/16
21⅜
37 111/16
23⅜ 41⅜ 1113/16
P
Q
R
S
9¼
11¼
13¼
15¼
17¼
19¼
9⅞
11⅝
13⅛
16¼
17⅞
20½
12¼
14¼
17¼
19¼
21¼
24¼
415/16
511/16
67/16
9⅜
103/16
11½
T
V
X
28½ 9/16 18⅞
31 9/16 22½
32½ 9/16 2211/16
40½ 11/16 25
42⅛ 11/16 28
46¾ 11/16 31
Y
Z
12
14
17
19
21
24
10½
121/16
14½
16⅛
17¾
20⅜
14
PEERLESS FORWARD CURVE BLOWERS
BELT DRIVE
BALL BEARING BLOWER AND MOTOR CONSTRUCTION
VARIABLE DRIVE SHEAVE – 1725 RPM MOTORS
AMCA CERTIFIED PERFORMANCE
LOW NOISE LEVEL OPERATION
FORWARD CURVE WHEEL DESIGN IS FOR USE IN CLEAN AIR SYSTEMS THAT HAVE
CONSTANT STATIC PRESSURE. STATIC FLUXUATION CAN RESULT IN MOTOR
OVERLOAD. A BACKWARD CURVED BLOWER IS RECOMMENDED FOR HIGH OR
INCONSISTANT STATIC PRESSURE.
Specify: Voltage – Phase – Rotation & Discharge Position.
MODEL
NO
HP
8A
1/4
8B
1/4
8C
1/3
8D
1/2
3/4
8E
INLET
DIA. *RPM
1200
1300
8”
1400
1600
1800
1 PHASE 3 PHASE
.25”
650
800
850
1000
1200
.5”
600
720
820
960
1140
.75”
560
680
770
920
1100
1.0”
500
650
740
890
1060
800
900
1100
1200
1400
830
1000
1090
1200
1400
770
930
1080
1180
1370
680
840
980
1120
1320
600
780
920
1110
1310
1.5”
540
650
820
980
1/4
1/4
1/3
1/2
3/4
11B
11C
11D
11E
11F
1/4
1/3
1/2
3/4
1
10”
700
800
900
1100
1200
1145
1275
1520
1750
1910
1020
1180
1400
1660
1890
954
1080
1350
1600
1785
827
1018
1270
1520
1700
12C
12D
12E
12F
12G
1/3
1/2
3/4
1
1.5
600
700
13¼” 800
900
1000
1700
1950
2300
2500
2920
1520
1850
2100
2400
2850
1350
1700
2000
2380
2740
1190
1530
1900
2200
2680
1640
1900
2420
15D
15E
15F
15G
15H
1/2
3/4
1 16⅛”
1.5
2
2550
3000
3300
3800
4200
2400
2820
3200
3750
4100
2170
2600
3000
3580
4000
1920
2440
2820
3400
3840
2040
2500
3200
3600
500
600
700
800
900
Price
CFM
9A
9B
9C
9D
9E
9”
*@ .25” Static Pressure
770
1000
1220
1080
1400
1600
2.0”
2.5”
Weather
Cover
3.0”
$880.
880.
920.
1030.
1090.
$1050.
1050.
1050.
1100.
1140.
$108.
$96.
950.
950.
990.
1100.
1160.
1120.
1120.
1120.
1170.
1210.
114.
96.
1250
1500
1000.
1040.
1150.
1210.
1340.
1170.
1170.
1220.
1260.
1270.
118.
96.
2000
2230
1520.
1570.
1610.
1620.
1630.
146.
144.
2000
1390.
1500.
1570.
1700.
1780.
1860.
1900.
1910.
1920.
1930.
176.
144.
3070
1790.
1850.
1990.
2000.
2170.
560
750
920
890
1130
2820
3330
650
850
780
1060
2800
Rotation and discharge position is determined from the motor side of the blower.
15
Vib.
Pads
OPTIONAL MOTORS & ACCESSORIES
MOTOR OPTIONS
ADD T0 LIST PRICE OF UNIT
OPTION
TWO
SPEED
HP►
1/6
1/4
1/3
1/2
3/4
1
2 WINDING
1725/1140 1Ф
-
$120.
$160.
$178.
$260.
$500.
1 WINDING
1800/900 3Ф
2 WINDING
1800/1200 3Ф
TOTALLY
ENCL.
FAN
COOLED
EXPL.
PROOF
1.5
2
3
5
7.5
10
700.
860.
530.
580.
680.
1200.
1230.
530.
700.
890.
1010. 1180. 1970. 2550.
*2750.
1725 & 3450
115/230/1Ф
260.
260.
260.
190.
200.
260.
280.
390.
1725 & 3450
•230/460 3Ф
90.
90.
140.
150.
150.
260.
260.
260.
290.
330.
320.
1725
115/230 1Ф
490.
490.
630.
630.
650.
690.
1650.
1725
•230/460 3Ф
410.
410.
540.
540.
600.
830.
830.
910.
970. 1220. 1370.
1260.
330.
•Can be used on 208 volts. *460 Volt only.
ACCESSORIES
BLOWER
SIZE
Spark
Resistant
8
Type B
9
$200. $200.
11
12
15
$200.
$360.
$400.
Acid Resistant Coating
200.
200.
200.
240.
270.
Discharge Damper
170.
170.
170.
170.
220.
DIMENSIONS
16
PEERLESS – NON-OVERLOADING BELT DRIVE
ULTRAFAN-PAK BLOWERS
ARRANGEMENT #10 SWSI CLASS 1
AMCA CERTIFIED PERFORMANCE TO 5” OF STATIC PRESSURE
BAKED EPOXY POWDER COAT STANDARD.
SELF-ALIGNING BALL BEARING PILLOW BLOCKS, 100,000 HRS.
GROUND & POLISHED SOLID STEEL SHAFT.
ALL WELDED HEAVY GUAGE HOUSINGS & FRAMES.
CW OR CCW ROTATION AVAILABLE IN 8 45º POSITIONS.
USED EXTENSIVELY FOR KITCHEN HOOD VENTILATION,
MODEL
NO.
HP
*RPM
@ .5”
C
105 D
E
F
D
122 E
F
G
D
135 E
F
G
E
150 F
G
H
F
165 G
H
J
F
182 G
H
J
G
200 H
J
K
G
222 H
J
K
G
H
245 J
K
L
1/3
1/2
3/4
1
1/2
3/4
1
1.5
1/2
3/4
1
1.5
3/4
1
1.5
2
1
1.5
2
3
1
1.5
2
3
1.5
2
3
5
1.5
2
3
5
1.5
2
3
5
7.5
2050
2400
2750
3078
1725
1975
2170
2500
1460
1680
1850
2120
1450
1650
1900
2100
1400
1580
1800
1998
1180
1350
1510
1710
1150
1290
1480
1700
955
1055
1200
1430
810
890
1030
1230
1387
H
270 J
K
L
H
300 J
K
L
J
330 K
L
M
2
3
5
7.5
2
3
5
7.5
3
5
7.5
10
925
1075
1250
1500
750
890
1050
1230
750
900
1000
1150
.25”
.5”
.75”
1”
1.5”
2”
2.5”
3”
1399
1650
1850
2100
2100
2450
2650
6030
6600
7700
1275
1600
1800
2035
1973
2300
2600
3050
2220
2640
2940
3450
3070
3550
4100
4600
3900
4600
5200
6100
4250
4940
5650
6500
5600
6400
7450
1208
1500
1760
2000
1850
2200
2500
2940
2010
2480
2800
3340
2800
3250
3950
4400
3590
4350
4950
5900
3970
4800
5400
6400
5340
6100
7100
1130
1400
1700
1915
1716
2100
2400
2890
1870
2310
2680
3200
2570
3050
3700
4200
3420
4060
4700
5650
3610
4400
5200
6200
5000
5800
6950
6900
7600
9000
6500
7350
8600
7850
8900
10000
7300
8250
9800
12000
2350
2760
3100
3550
3330
3700
4300
4200
4950
4540
5300
5750
5950 5450
6850 6400
8300 7850
10100 9900
6600 6000
7650 7200
9200 8850
11000 10500
9230 8500
8000
10850 10100 9700
12500 12000
14000
10500 9700 8800
12000 11400 10800
15000 14000 13500
17000 16600 16000
13800 12800 11900
16700 15700 15200
18700 18000
20800 20500
7500
9150
11500
13600
8000
10000
13000
15500
11200
14500
17000
19500
890
700
1335 1020
820
1540 1399 1250
1830 1660 1520
1430
1870 1600 1250
2190 1990 1720
2700 2500 2300
1470
2040 1600
2410 2120 1780
2960 2730 2500
2170
2650 2200
3330 3000 2650
3840 3570 3300
2810 2170
3650 3200 2660
4300 3900 3430
5200 4900 4600
3030
3970 3400
4560 4170 3610
5700 5300 4900
4300 3300
5100 4500 3700
6400 5900 5300
8000 7600 7250
4450
5600 4450
7000 6250 5370
9250 8500 7900
4490
5880
7700 6600
10000 9200 8500
12300 11600 10800
6280 5030
8000 7120 6200
10500 9600 8700
12700 12000 11500
8750 7700
11700 10700 9500
14470 13400 12400
12700 11400 10100
16000 14900 13500
18500 17000 16000
1050
1350
1390
2100
2200
2000
2900
3000
4150
4370
4600
6700
7000
7550
10000
3.5” (4” 4.5” 5”)
(UP TO 1500 $1320.
CFM @ 5”
1400.
800 2 HP MAX.)
1460.
1200
1600.
(UP TO 2000 1580.
CFM @ 5”
1640.
3 HP MAX.)
1780.
1820
1800.
(UP TO 2400 1760.
CFM @ 5”
1820.
3 HP MAX.)
1960.
1970.
(UP TO 3000 1940.
CFM @ 5”
2070.
5 HP MAX.) 2080.
2500
2220.
(UP TO 3500 2270.
CFM @ 5”
2280.
5 HP MAX.) 2420.
3800
(UP TO 4400 2290.
CFM @ 5”
2300.
5 HP MAX.)
2450.
3800
(UP TO 5000 2630.
CFM @ 4.5” 2820.
5 HP MAX.)
6150
(UP TO 6500 3290.
CFM @ 5”
3470.
7.5 HP MAX.)
6300
(UP TO 7950 3610.
CFM @ 5”
3800.
10 HP MAX.)
9300
$1420.
1470.
1510.
1520.
1650.
1690.
1590.
1600.
1830.
1870.
1770.
1790.
1980.
1990.
2000.
2010.
2080.
2100.
2140.
2300.
2110.
2130.
2170.
2330.
2510.
2540.
2700.
2820.
3150.
3190.
3320.
3440.
3480.
3520.
3710.
3770.
4050.
Less
Weather Vib. Motor &
Cover Pads Drive
$120.
$96. $970.
146.
144. 1160.
154.
144. 1340.
176.
144.
1450.
220.
144.
1650.
276.
168. 1680.
290.
168. 2050.
376.
168. 2670.
380.
168. 3020.
(UP TO 9200 4550.
4270.
CFM @ 5”
4370.
400.
168. 3730.
8100
7200 10 HP MAX.)
4490.
10500
9600
4770.
(UP TO 12000 5120.
4840.
CFM @ 5”
4940.
466.
168. 4310.
8500
15 HP MAX.)
5060.
11400 10700
5340.
(UP TO 14000
6120.
CFM @ 5”
6250.
580.
168. 5490.
12000 10700 15 HP MAX.)
6530.
14900 13600
6800.
See page 16 for two speed, TEFC & explosion proof motors.
17
Blower
1Ø
3Ø
PEERLESS ULTRA-FANPACK
ACCESSORIES
OPTION
SPARK
TYPE B
RESIST. TYPE C
ACID RESIST. COAT
DISCH. DAMPER
Blower size
105
122
135
150
165
182
200
222
245
270
300
330
$290.
$130.
360.
130.
380.
130.
400.
140.
470.
140.
520.
140.
730.
180.
910.
190.
910.
210.
1220.
370.
1350.
430.
1750.
500.
$200.
260.
260.
260.
300.
300.
300.
390.
390.
390.
450.
500.
$170.
170.
180.
210.
210.
260.
290.
320.
380.
400.
430.
470.
Spark Resistant – Type B: AMCA standards require the blower to have the wheel and ring about the opening through which the shaft passes of non-ferrous material. Blowers for this
condition are furnished with a non-ferrous wheel and rubbing plate around the shaft opening.
Spark Resistant – Type C: AMCA standards require the blower to be so constructed that a shift of the wheel or shaft will not permit two ferrous parts of the blower to rub or strike. Blowers
for this condition will be furnished with non-ferrous rubbing plate around shaft opening and a non-ferrous inlet cone.
See page 16 for two speed, totally enclosed & explosion proof motor additions.
DIMENSIONS
Note: Letters “C” and “D” are outside dimensions.
*”C” dimension on 105 extends 1-1/16 beyond center-line.
OUTLET
INLET
18
Acid and Chemical Resistant
Direct and Belt Drive Blowers
Available In PVC & Polypropylene
No Metal In The Air Stream
Corrosion Resistant
Fire Retardant (Polypropylene)
Field Proven Longevity Against Acids & Chemicals
19
PERFORMACE DATA & PRICING
MODEL
NO.
HP
CMV125 B 1/4
C 1/3
FPM *CFM
375
50
755 100
1130 150
1510 200
1890 250
2270 300
2645 350
.25
.50
1/4
1/3
1/2
3/4
1
1/4
1/3
1/2
3/4
1
1.5
2
1712/.019
1963/.027
2387/.046
1210/.010
1553/.019
1831/.028
2071/.039
2481/.062
2832/.089
3142/.117
3424/.148
1448/.020
1748/.031
2002/.043
2226/.056
2616/.084
2953/.114
3254/.147
3530/.183
1724/.037
1985/.051
2214/.068
2421/.081
2786/.113
3107/.148
3397/.186
2252/.081
2457/.098
2646/.116
2986/.153
3290/.193
3566/.234
2539/.121
2724/.142
2896/.163
3211/.205
3497/.250
2841/.176
3008/.199
3165/.223
3457/.272
2.0
2.5
1.5
G 1.5
H 2
CMV250 J 3
K 5
L 7.5
J 3
CMV280 K 5
L 7.5
K 5
CMV315 L 7.5
M 10
K 5
CMV400 L 7.5
M 10
N 15
3.0
3.5
4.0
1893/.065
2171/.093
2417/.123
2640/.156
2845/.191
3030/.227
3216/.266
1709/.072
2019/.108
2286/.146
2524/.186
2741/.228
2942/.273
3129/.319
3306/.367
1911/.122
2197/.169
2448/.218
2674/.269
2882/.323
3076/.378
3258/.434
3429/.492
2157/.196
2417/.255
2649/.316
2862/.379
3059/.444
3244/.510
3418/.577
3584/.647
2434/.302
2669/.374
2883/.447
3081/.522
3267/.598
3442/.676
3500/.793
2.0
2.5
3.0
4.0
5.0
730 200
1095 300
1460 400
1825 500
2190 600
2555 700
2920 800
3285 900
3650 1000
1108/ .037
1466/.072
1751/.111
1994/.153
2210/.199
2406/.247
2756/.350
3066/.462
1263/.065
1591/.112
1860/.162
2093/.215
2302/.271
2492/.329
2835/.453
3139/.584
1449/.109
1745/.168
1996/.230
2217/.294
2417/.361
2601/.430
2933/.575
3230/.728
1656/.173
1922/.244
2154/.318
2362/.395
2552/.473
2729/.554
3050/.722
3338/.896
1877/.262
2117/.346
2331/.432
2526/.521
2706/.612
2874/.704
3182/.895
3462/1.09
2109/.382
2326/.478
2524/.577
2705/.678
2875/.781
3035/.886
3330/1.10
3600/1.32
2545/.645
2728/.757
2898/.871
3057/.986
3209/1.10
3491/1.34
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1600
1800
2000
2200
2400
2400
2600
2800
3000
3200
3500
3750
4000
4250
4500
5000
5500
6000
6500
7000
7500
1470/.288
1822/.465
2124/.653
2393/.848
2637/1.05
2863/1.25
3073/1.46
3272/1.68
1561/.359
1892/.554
2181/.760
2440/.973
2678/1.19
2898/1.42
3104/1.65
3298/1.88
1657/.445
1970/.657
2245/.880
2495/1.11
2725/1.35
2940/1.59
3141/1.84
3331/1.09
1758/.545
2053/.774
2316/1.01
2557/1.26
2780/1.52
2988/1.78
3184/2.05
3371/2.35
2141/.908
2393/1.16
2624/1.43
2840/1.70
3042/1.99
3233/2.27
3415/2.56
2233/1.06
2474/1.33
2697/1.62
2905/1.91
3102/2.21
3288/2.51
3466/2.82
2330/1.23
2560/1.52
2774/1.82
2976/2.13
3166/2.45
3348/2.77
3521/3.10
2429/1.42
2650/1.73
2856/2.05
3051/2.38
3235/2.71
3412/3.05
3581/3.40
2532/1.64
2743/1.96
2941/2.30
3130/2.64
3309/3.00
2480/3.35
1453/.904
2637/1.88
1688/1.24
2839/2.24
1863/1.60
3030/2.57
2043/1.97
3212/2.93
2212/2.35
3386/3.30
2370/2.75
3553/3.68
2520/3.15
2663/3.57
1581/1.19
1778/1.56
1960/1.95
2130/2.35
2289/2.77
2440/3.20
2584/3.63
2721/4.09
1712/1.53
1895/1.50
2065/2.37
2224/2.81
2376/3.26
2519/3.72
2657/4.20
2789/4.68
1847/1.95
2016/2.40
2175/2.86
2326/3.33
2469/3.82
2606/4.31
2738/4.82
1984/2.44
2142/2.93
2291/3.42
2433/3.93
2570/4.60
2700/4.98
2826/5.53
1565/2.04
1725/2.53
1875/3.05
2016/3.58
2150/4.13
2278/4.69
1641/2.40
1793/2.93
1936/3.50
2072/4.05
2201/4.63
2325/5.23
2443/5.83
1720/2.86
1865/3.39
2001/4.00
2131/4.57
2256/5.19
2375/5.81
2490/6.50
1802/3.30
1939/3.90
2070/4.52
2195/5.15
2314/5.79
2430/6.45
2541/7.12
1885/3.84
1561/3.59
2016/4.47
1690/4.29
2141/5.11
1812/5.02
2261/5.78
1928/5.76
2377/6.50
2039/6.53
2488/7.15
2146/7.30
2249/8.10
1636/4.20
1758/4.94
1875/5.70
1986/6.50
2093/7.30
2196/8.12
2296/8.96
1712/4.88
1829/5.66
1940/6.47
2047/7.30
2150/8.14
2250/9.01
1790/5.64
1901/6.47
2008/7.31
2111/8.19
2210/9.07
1114/2.60
1285/3.65
1438/4.75
1578/5.88
1709/7.05
1831/8.24
1946/9.44
1199/3.32
1358/4.50
1503/5.65
1636/6.88
1761/8.15
1879/9.45
1990/10.7
1286/4.16
1435/5.39
1572/6.68
1699/8.01
1819/9.39
1932/10.7
2040/12.2
1376/5.17
1515/6.47
1645/7.86
1766/9.30
1881/10.7
1989/12.3
1598/7.73
1721/9.20
1836/10.7
1946/12.3
2015/14.0
2946/.532
3142/.617
3327/.705
3050/.642
3242/.738
3422/.836
3593/.936
1.0
2365
2660
2995
3250
3545
3845
4140
3030
3405
3785
4165
4540
3620
3920
4225
4525
4825
4170
4470
4770
5065
3325
3695
4065
4435
4805
5175
5545
1.5
2773/.854
2941/.977
3100/1.10
3251/1.23
3394/1.36
3006/1.10
3163/1.24
3312/1.38
3453/1.52
3589/1.66
2.0
3.0
4.0
5.0
1683/9.16
1799/10.7
1910/12.3
1770/10.8
1881/12.4
1986/14.1
6.0
$4090. $4020. $4340. $4380.
4110. 4100. 4490. 4510.
4.5
1564/.040
2734/.448
Belt Drive
Explosion Proof
TEFC
1Ф
3Ф
1Ф
3Ф
2746/.068
100
200
300
400
500
600
700
460
920
1385
1845
2310
2770
3235
1.0
D 1/2
E 3/4
F 1
CMV200 G 1.5
H 2
J 3
K5
3
1416/.011
.50
B
C
D
CMV180 E
F
G
H
2.5
1035/.005
1.0
B
C
CMV160 D
E
F
Available in Belt and Direct Drive
STATIC PRESSURE - RPM/BHP
.75
1.0
1.5
2.0
7.0
4300.
4320.
4380.
4450.
4650.
4260.
4340.
4350.
4380.
4460.
4580
4730.
4810.
4960.
5080.
4620.
4750.
4780.
4900.
5040.
4470.
4490.
4550.
4610.
4820.
4830.
5110.
4430.
4510.
4520.
4550.
4630.
4650.
4670.
4740.
4900.
4970.
5120.
5250.
6440.
6450.
4780.
4910.
4940.
5080.
5210.
5220.
5350.
4880.
4940.
5150.
5140.
5150.
4850.
4880.
4960.
4980.
5000.
5110.
5250.
5300.
5450.
5580.
6770.
6780.
5270.
5400.
5540.
5550.
5680.
5790.
6100.
6110. 5950. 7750.
6410. 5980. 7760.
6170
6330.
6670.
6520.
6650.
6850.
7220.
7720.
6800.
6970.
7430.
7490.
7860.
8350.
7550.
7880.
8340.
8440.
8930.
9270.
9170.
9500.
9960.
11020.
10060.
10550.
10890.
12000.
8.0
2401/5.26
All blowers include housing drain, sleeve inlet and outlet and powder coated motor pedestal. *Lower performances for some sizes not shown, please
inquire. Direct drive blowers are available at lower prices. Choose blower with an approximate RPM of 1200, 1750 or 3500 in CFM range.
Accessories
Model
Inlet/Outlet
Flange
Blast Gate
Butterfly Damper
With Flange
Vibration Pads
Vibration
Hangers
125
160
180
200
250
280
315
400
$116.
$138.
$138.
$150.
$180.
$180.
$200.
$200.
420.
420.
490.
490.
540.
620.
620.
650.
600.
600.
650.
650.
740.
940.
940.
1200.
96.
96.
96.
96.
96.
96.
96.
96.
112.
112.
112.
112.
112.
112.
112.
112.
FAN DISTRIBTORS, INC. 617-868-1310
20
DELHI INDUSTRIES DSQ-B SERIES
Belt Drive
Backward Inclined Non-Overloading Inline Blowers.
Gasketed Leak Proof Access Panels.
Angle Iron Mounting Lugs can be relocated for Base or
Suspension mounting.
Motor Cover is supplied.
See page 16 for special motor additions.
MODEL
DSQ-B HP
B
C
10 D
E
F
1/4
1/3
1/2
3/4
1
C
D
13 E
F
G
H
1/3
1/2
3/4
1
1.5
2
D
E
16 F
G
H
J
1/2
3/4
1
1.5
2
3
FPM CFM
587
661
734
808
881
955
573
655
737
819
901
983
1064
1146
1228
884
952
1020
1088
1156
1224
1293
1361
1429
800
900
1000
1100
1200
1300
1400
1600
1800
2000
2200
2400
2600
2800
3000
3250
3500
3750
4000
4250
4500
4750
5000
5250
.25
.5
.75
RPM/BHP
1
1.5
2
1438/.14
1571/.18
1708/.23
1846/.28
1986/.35
2126/.43
1632/.20
1746/.25
1866/.30
1993/.37
2125/.44
2259/.53
1809/.28
1912/.33
2021/.39
2136/.46
2256/.54
2380/.63
1970/.36
2065/.42
2166/.48
2273/.55
2385/.64
2501/.73
2246/.54
2340/.61
2432/.68
2527/.77
2628/.86
2733/.96
2492/.73
2572/.81
2666/.90
1043/.18
1150/.24
1259/.31
1371/.40
1485/.50
1600/.62
1717/.76
1834/.93
1953/1.11
1191/.28
1284/.35
1383/.43
1486/.53
1592/.64
1701/.77
1811/.93
1923/1.10
2037/1.30
1327/.38
1408/.46
1497/.55
1593/.66
1692/.79
1794/.93
1900/1.10
2007/1.28
2116/1.49
1456/.50
1526/.59
1606/.68
1693/.80
1786/.94
1884/1.09
1984/1.27
2087/1.47
1703/.76
1751/.86
1812/.97
1884/1.10
1965/1.25
2052/1.42
1934/1.06
1964/1.16
2009/1.29
2066/1.44
2148/1.39
2166/1.50
1165/.61
1240/.73
1317/.86
1394/1.02
1472/1.19
1550/1.38
1628/1.59
1707/1.83
1786/2.09
1253/.79
1324/.93
1396/1.07
1469/1.24
1543/1.43
1618/1.63
1694/1.86
1770/2.11
1846/2.38
1335/.99
1402/1.13
1470/1.30
1540/1.47
1611/1.67
1683/1.89
1756/2.13
1830/2.39
1414/1.19
1477/1.35
1541/1.52
1608/1.71
1676/1.92
1745/2.15
1816/2.40
1887/2.68
1563/1.61
1618/1.79
1676/1.98
1737/2.20
1799/2.44
1864/2.70
1703/2.06
1752/2.26
1804/2.47
1859/2.71
1841/2.56
1881/2.76
2.5
Single Speed
Two Speed
1 Phase 3 Phase
1 Phase 3 Phase
2754/.94 $1650.
1660.
1710.
1780.
1880.
$1650. $1700.
1700. 1730.
1710. 1750.
1720. 2060.
1730. 2370.
$2220.
1740.
1810.
1870.
2010.
2020.
2160.
1830.
1840.
1850.
1860.
1870.
1880.
1860.
1880.
2190.
2500.
-
2350.
2420.
2560.
1980.
2040.
2170.
2140.
2320.
-
1940.
1990.
2000.
2010.
2050.
2210.
2050.
2360
2670.
-
2510
2590.
2720.
2800.
(4) Vibration Hangers - $112.
*DSQ-B-10 has extended length, sizes 13 & 16 are cubed.
21
DELHI DUCT BLOWERS
Forward curved blowers operate at
low RPM for low noise levels.
Used for exhaust or supply air
applications.
Can be installed in any position.
Optional filter section.
MODEL
1/4” SP
1/8” SP
1/2” SP
3/4” SP
1” SP
1.5” SP
2” SP
2.5” SP
NO.
HP CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
A
B
207 C
D
E
1/4
1/4
1/3
1/2
3/4
250
500
750
1000
1250
513
638
849
1073
1304
.01
.04
.10
.22
.39
719
769
937
1149
1369
.02
.05
.12
.25
.44
1018
1026
1107
1277
1484
.05
.09
.17
.30
.51
B
209 C
D
E
B
C
210 D
E
F
1/4
1/3
1/2
3/4
1/4
1/3
1/2
3/4
1
1250
1500
1750
2000
1500
1750
2000
2250
2500
633
739
847
957
553
627
702
780
859
.17
.28
.43
.64
.18
.27
.39
.55
.74
695
788
888
993
616
679
747
819
894
.19
.31
.47
.67
.21
.31
.44
.60
.80
840
899
977
.25 985 .32 1118 .40 1364 .57
.37 1023 .45 1145 .53 1367 .71
.54 1078 .62 1185 .71
760
795
843
902
967
.29 893
.38 922
.51 951
.69 992
.90 1044
.37
.48
.61
.78
.99
C
D
212 E
F
G
1/3
1/2
3/4
1
1.5
1750
2000
2250
2500
2750
3000
3250
3500
3250
3750
4250
4750
5250
5750
4000
4500
5000
5500
6000
6500
7000
7500
8000
445
487
533
581
630
680
730
781
399
453
508
564
620
676
302
328
355
384
412
442
471
501
531
.15
.21
.29
.39
.50
.64
.81
1.00
.43
.65
.94
1.30
1.74
2.28
.40
.54
.71
.92
1.17
1.47
1.81
2.21
2.66
528
559
594
634
676
720
767
815
432
478
528
581
635
690
350
371
394
419
445
471
499
527
555
.20
.26
.34
.44
.56
.70
.87
1.06
.48
.70
.98
1.35
1.79
2.33
.50
.64
.82
1.04
1.30
1.60
1.96
2.36
2.82
628
690
719
749
781
814
851
890
534
554
585
625
670
720
446
457
472
490
509
531
554
578
604
.29
.37
.46
.57
.70
.85
1.02
1.21
.66
.86
1.13
1.48
1.92
2.46
.73
.91
1.11
1.33
1.60
1.91
2.27
2.69
3.16
.40
.48
.58
.71
.85
1.01
1.19
1.4
.96
1.12
1.36
1.70
2.12
2.64
1.00
1.18
1.40
1.66
1.95
2.28
2.65
3.08
3.55
E 3/4
F 1
215 G 1.5
H 2
J 3
F 1
G 1.5
218 H 2
J 3
K 5
1237
1243
1290
1399
1584
793
808
826
851
880
911
940
974
645
651
663
687
719
759
536
541
549
560
574
591
610
630
652
.08
.13
.22
.35
.57
1416
1438
1460
1539
1681
.11
.18
.27
.43
.64
1708
1767
1781
1807
.19
.28
.40
.57
*PRICE
1Ф
3Ф
FILTER VIB.
KIT HANG.
.26 2159 .33 $800. $910.
800. 910.
.39 2268 .52
830. 960.
.54 2277 .69
940. 970.
.72
1010. 980.
1949
2037
2032
2053
1013
1033
1062
1091
.47 1230 .69 1415 .94
.59 1235 .81
.73 1253 .97
.90
904
915
930
947
968
995
1025
727
745
751
760
780
809
617
619
622
629
638
651
666
682
701
.51
.60
.71
.84
.99
1.17
1.37
1.23
1.48
1.70
1.98
2.39
2.90
1.29
1.49
1.72
1.98
2.30
2.67
3.07
3.51
4.00
1105
1105
1111
1123
1138
1155
.77
.87
.99
1.14
1.31
1.50
1275
1276
1276
1279
883
886
900
916
1.64 1015 2.05
2.08 1020 2.52
2.47
2.83
754
755
756
758
761
766
775
786
798
1.93
2.17
2.43
2.73
3.06
3.44
3.89
4.39
4.94
840.
960.
970.
1030.
890.
930.
1040.
1100.
1240.
$220.
$112.
240.
112.
280.
112.
320.
112.
380.
112.
940.
990.
1000.
1010.
1010.
1060.
1070.
1080.
1090.
1.05 1421 1.34
1.18 1426 1.50 1070. 1200.
1.31
1180. 1210.
1.46
1250. 1220.
1380. 1230.
1340. 1240.
867
870
871
872
874
876
879
2.59
2.89
3.21
3.55
3.92
4.33
4.78
1620. 1570.
1750. 1580.
1720. 1590.
1910. 1630.
1790.
966
970
973
974
975
3.29
3.64 2910. 2720.
4.02 2920. 2740.
4.41 3060. 2780.
4.83
2940.
3060.
550.
144.
*See page 16 for two speed motors additions.
MODEL
A
B
C
D
E
F
G
H
207
18
15⅜
23
18¼
93/16
14½
9⅝
1¼
209
21
18
23
10¼ 1113/16
17½
11¾
1¼
210
22¼
20
24¾
11⅜
13⅛
18¾
13⅜
1¼
212
27
23
27½
137/16
15⅝
23½
16⅛
1¼
215
33½
28
32
32
18⅝
28
19½
2⅝
218
41½
34
44
19⅝
22⅝
35
24
2¾
J
K
L
M
1¼
7/8
15⅞
13⅜
1¾
7/8
19
16
1¾
7/8
20¼
18
1¾
7/8
25
21
1¾
7/8
30½
25
1¾
1⅛
35⅜
31⅝
22
VIBRATION ISOLATORS
TYPE R PAD
No. Price
R-1
$24.
R-2
28.
R-3
44.
RH-1
28.
RH-2
36.
Number
Max. Deflect.
Load Inches
R-1 Blk.
R-1 Red
R-1 Grn.
45
70
100
.20”
R-2 Blk.
R-2 Red
R-2 Grn.
170
240
380
.25”
1¾ 3/8
3 11/32 7/32 1¼ 3⅞ 2⅜
R-3 Blk. 250
R-3 Red 525
R-3 Gray 750
.25”
2½ ½
4⅛ 9/16 ¼
A
B
1¼ 5/16
C
Dimensions
D
E
H
2⅜ 11/32 3/16 1
L
Color (weight designation)
Black - Red - Green
“
“
“
“
“
“
Black – Red
Black – Red - Gray
W
Number
3⅛ 1¾
1¾ 5½ 3⅜
Max. Deflect.
Load Inches
RH-1 Blk.
RH-1 Red
45
75
RH-2 Blk.
RH-2 Red
RH-2 Gray
170
240
550
A
B
C
D
.20”
1⅛
3/4
.25”
1⅜ 1-3/16 5/8 11/16 4½
3/8 13/32 3
TYPE RH HANGER
BALDOR ● RELIANCE Inverter/Vector Motor Controls
V/Hz or Sensorless Vector Control Modes
Integral Drive Mounted Operator Interface Module
4-Character LED Display Lines
8 Programmable Preset Speeds
Keypad Speed Control
0-400 Hz Frequency Control Range
An economical way to control speeds on 3 phase fans &
blowers without adding the cost of a two speed motor.
NEMA 1/IP30
230v, 50/60 Hz 3-Phase
460v, 50/60 Hz, 3-Phase
●Enclosure
Model
Output Amps. Price 230v & 460v
Frame Price
HP
Model
Output Amps.
2.5
VS1MD40P5
1.25
1/2 VS1MD20P5
$650.
$72.
A
$770.
5.0
VS1MD41
2.5
1 VS1MD21
670.
72.
A
800.
8.0
VS1MD42
4.0
2 VS1MD22
840.
72.
B
970.
12.0
VS1MD43
6.0
3 VS1MD23
960.
84.
C
1130.
16.0
VS1MD45
8.0
5 VS1MD25
1230.
84.
C
1390.
24.0
12.0
7.5 VS1MD27
1780.
102. VS1MD47
D
1790.
32.0
16.0
10 VS1MD210
2110.
102. VS1MD410
D
2130.
46.0
24.0
15 VS1MD215
2630.
114. VS1MD415
E
2650.
60.0
30.0
20 VS1MD220
3270.
114. VS1MD420
E
3300.
●The VS1MD AC drive has an enclosure rating of IP20, but includes provisions to mount a NEMA
1 Kit. Kit provides a metal conduit plate for attaching user conduit, as well as a plastic top
cover for the drive.
23
H
L
2¼
3
W
2
2¼
DELHI Roof Mounted Air Supply
Filtered side intake provides a means to meet supply &
exhaust air in restaurant applications.
Easy on site addition of customer supplied duct
extension provides additional separation where necessarry.
Heavy duty ball bearing suitable for -65º to 250º f.
For use in all buildings with negative pressure problems.
Limits the loss of air conditioning and heat due to kitchen
hood exhaust.
MODEL
NO.
3/4” SP
1/4” SP
1/2” SP
1” SP
1.5” SP
2” SP
2.5” SP
HP CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
C
D
SIS10 E
F
G
1/3
1/2
3/4
1
1.5
500
1000
1500
2000
2500
501 .04
559 .12
675 .26
810 .58
955 1.04
710
723
808
923
1055
.08
.19
.39
.71
1.20
858
862
927
1023
1143
.13
.26
.49
.85
1.37
980
1003
1035
1119
PRICE
1Φ
3Φ
.18
.34
.59
.99
1182
1225
1238
1292
.29 1350 .42 1498 .56 $1550. $1680.
.50 1413 .67 1577 .85
1670. 1690.
.79 1421 1.02 1592 1.25 1730. 1700. $240.
1.25
1860. 1710.
1960. 1720.
D 1/2 1500 484 .18
E 3/4 2000 551 .34
SIS12 F 1 2500 631 .58
G 1.5 3000 720 .92
H 2 3500 810 1.38
628 .28
670 . 45
734 .72
805 1.10
887 1.59
766 .39 880 .51
779 .58 886 .72
827 .87 915 1.02
891 1.27 968 1.45
960 1.80 1034 2.00
1070
1082
1086
1115
.77 1231 1.05 1372 1.37
1.04 1242 1.36 1383 1.70
1.36 1252 1.75
1.81
1910.
1970.
2110.
2210.
2260.
1870.
1920.
1930.
1940.
1980.
E
F
SIS15G
H
J
2170.
2300.
2400.
2460.
2120.
2130.
2140.
2180.
2330.
3050.
3150.
3200.
2860.
3880.
2920.
3050.
3170.
3/4
1
1.5
2
3
F 1
G 1.5
SIS18H 2
J 3
K 5
3000
3500
4000
4500
5000
444 .54
487 .78
534 1.09
584 1.50
637 2.00
550 .73
576 .99
610 1.32
649 1.74
693 2.25
643
667
689
719
754
.94
1.23
1.58
2.01
2.54
726
744
768
790
817
1.14
1.47
1.87
2.31
2.85
879
883
898
922
1.59 1015 2.14 1137 2.73
1.95 1018 2.47
2.40 1019 2.96
2.95
4500
5000
5500
6000
6500
7000
7500
8000
402
429
457
486
516
546
577
609
483
505
527
551
576
602
630
659
553
571
591
613
635
658
682
707
1.49
1.77
2.09
2.47
2.93
3.45
4.05
4.72
619
632
649
668
689
711
733
1.81
2.14
2.51
2.91
3.36
3.89
4.5
773
757
757
770
787
805
2.84
2.98
3.31
3.80
4.35
4.92
.85
1.11
1.41
1.77
2.18
2.67
3.21
3.84
1.14
1.40
1.72
2.10
2.54
3.05
3.63
4.28
12”
CURB
897
898
882
871
3.79
4.27
4.48
4.72
#S216M
$214.
#S218M
260.
218.
#S220M
300.
220.
#S222M
997 4.61
*Motorized dampers
are 115V/230V/1PH/60HZ.
*MOT.
DAMPER
300.
224.
See page 16 for
Two speed motors.
Or page 23 for Inverters.
24
FloAire – Centrifugal Roof Fan
DIRECT DRIVE
Non-overloading backward inclined wheels, 3003-H14 aluminum.
All sizes Can be wall mounted.
Bird screen is standard.
Variable speed control mounted under motor dome for fine tuning.
Exterior air is drawn into the motor area for positive cooling.
Disconnect switch is standard.
Model
No.
SONES
HP RPM* @ 1/8”
DR10H 0.07
DR12H 0.14
DR33H 0.33
0.75
DR75H
0”
1/8”
CFM Against Static Pressure
1/4”
3/8”
1/2”
5/8”
3/4”
1600
1400
1200
1400
1200
1100
1000
1700
1500
1300
1200
1100
8.0
6.0
4.4
9.6
7.0
5.9
4.7
14.2
11.6
8.7
7.5
6.3
541
473
405
764
655
600
546
1329
1172
1016
938
859
490
416
339
685
563
500
435
1279
1116
951
868
783
442
361
275
606
468
394
314
1230
1060
890
803
715
394
303
188
522
364
275
181
1182
1010
833
739
635
1175
1075
975
875
775
14.9
12.7
10.6
8.8
7.1
2557
2339
2121
1904
1686
2457
2230
2000
1768
1532
2354
2116
1870
1617
1356
2243
1989
1729
1449
1141
7/8”
342
227
275
122
197
432
252
157
337
148
243
1139
961
765
657
535
1095
904
685
555
1049
839
579
991
763
2126
1859
1569
1248
2001
1709
1384
1865
1540
1086
1712
1294
115/1/60 12” Roof
Vari. Spd.
Curb Damper
64
$590
$180.
$60.
720.
180.
60.
930.
190.
70.
1110.
200.
76.
156
*Reduced RPM on all models is attained using the supplied solid state speed control.
Dimensions (Base O.D. = C)
Fan #
DR10H
DR12H
DR33H
DR75H
HT
14½
16¼
19⅛
23⅜
W
20¾
23¾
26¼
33¼
B
2
2
2
2
C
19
19
21
24¾
Curb O.D.
S18D
18
20
24
E
12
12
12
12
R
8⅛
10⅝
12⅛
14⅞
S & P Roof or Wall
RO
12
12
16
20
Mount Centrifugal
Ultra Low Profile.
UL 705 Electrical. – AMCA Air & Sound Licensed.
Disconnect Switch, Aluminum Bird Screen.
Backward Curved Centrifugal Wheel.
Direct Drive
Totally Enclosed Continuous Duty Motor.
Model
No.
Watts
&
RPM
Amps
SONES
@ 1/2”
0”
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
115/1/60
12” ROOF
CURB
1 Speed Vari. Spd. Damper
LPD6
90
2800
7.2
302
268
247
222
197
175
155
118
$496.
$536.
$60.
$170.
LPD8
115
2775
11.9
387
358
331
303
275
245
222
178
$546.
$586.
$60.
$170.
Dimensions
Model
LPD6
LPD8
A
16½
16½
Base O.D. – Uses 16” SQ. Curb.
B
7
7
C
16½
16½
RO/WO
12
12
LBS.
12
15
20
FloAire Centirugal Exhaust Fan
BELT DRIVE
Non Overloading Backward curve wheel.
High Efficiency with Low Tip Speeds For Quiet Operation.
Wheels Made From 3003-H14 Aluminum.
Bird Screen is Standard. Quick release Latches On Motor Dome.
Can Be
Can be Wall Mounted Up To Model #BDCR24H.
Lower CFM than listed can be attained by reducing RPM for each fan size. Please inquire.
Model
No.
HP CFM
B
BDCR11C
D
B
BDCR13C
D
E
C
BDCR15D
E
F
1/4
1/4
1/3
1/4
1/3
1/2
3/4
1/3
1/2
3/4
1
D
BDCR20E
F
G
H
G
BDCR24H
J
K
H
BDCR30J
K
H
BDCR36J
K
L
1100
1300
1500
1700
1900
2100
2300
2400
2800
3200
3600
4000
1/2 4500
3/4 5000
1 5500
1.5 6000
2 6500
7000
1.5 8000
2
9000
3 10000
5 11000
12000
10000
2 11000
3 12000
5 13000
14000
2 13000
3 15000
5 17000
7.5 19000
21000
0”
1095/.08
1295/.14
1494/.21
1049/.15
1173/.21
1296/.28
1420/.37
928/.20
1082/.32
1237/.47
1392/.68
697/.34
784/.49
872/.67
959/.89
1046/1.15
1133/1.46
1220/1.82
844/1.39
949/1.98
1055/2.71
1160/3.61
1265/4.69
609/1.58
670/2.11
731/2.74
792/3.48
853/4.34
443/1.41
511/2.17
579/3.16
647/4.41
715/5.95
1/4”
1267/.14 1425/.21
1558/.28
1436/.21 1583/.28
1613/.29
1169/.23 1272/.32
1367/.41
1282/.30 1377/.40
1464/.50
1396/.38 1484/.49
1512/.48
1027/.30 1124/.42
1218/.55
1168/.44 1252/.57
1334/.71
1312/.61 1386/.75
1459/.91
1458/.82 1524/.99
764/.51
834/.69
904/.89
843/.67
905/.87
968/1.09
924/.87
979/1.09 1036/1.33
1006/1.11 1056/1.35 1107/1.60
1089/1.39 1134/1.65 1181/1.92
1172/1.72 1214/1.99
855/1.72 930/2.09 976/2.48
986/2.35 1025/2.75 1065/3.18
1087/3.12 1122/3.56 1158/4.02
1189/4.05 1220/4.53
1”
1.25”
1.5”
1462/.50
1308/.67
1412/.85
1395/.81
1492/1.0
1480/.95
972/1.11 1039/1.33
1029/1.32 1090/1.56
1092/1.57 1147/1.83
1158/1.86
1105/1.57
1149/1.81
1022/2.90 1067/3.32
1106/3.63 1147/4.09
1194/4.51
1154/4.20
1187/4.57
647/2.06
705/2.64
764/3.32
823/4.12
679/2.49
735/3.11
792/3.85
849/4.7
711/2.92
764/3.58
818/4.36
743/3.38
793/4.07
844/4.88
777/3.88
823/4.59
480/2.03
544/2.89
609/3.98
674/5.33
740/6.97
515/2.65
574/3.59
636/4.77
699/6.22
550/3.29
604/4.31
662/5.58
723/7.11
585/3.97
634/5.06
689/6.40
621/4.70
665/5.84
715/7.25
Dimensions
21
RPM/BHP
3/4”
1/2”
MODEL
HT
W
B
C
25½
27¼
30⅝
32¾
37¾
40
26¼
29⅝
33¼
38¼
42½
52
2
2
2
2
2
2
21
21
24¾
28
33
40
44
45-9/16 63-7/16 2
D
R
20 12⅛
20 13¼
24 14⅞
27 18
32 23⅞
39 24
43 25¼
RO
WEIGHT
16
16
16
20
24
30
36
105#
105#
130#
195#
215#
380#
420#
$1100.
1100.
1130.
1130.
1170.
1280.
1340.
1240.
1350.
1420.
1550.
$1210. $1210.
1210. 1210.
1290. 1260.
1250. 1250.
1330. 1300.
1350. 1320.
1670. 1340.
1400. 1370.
1420. 1390.
1740. 1410.
2040. 1500.
-
1690.
1760.
1890.
1900.
2040.
1760.
2080.
2380.
-
1650.
1700.
1840.
1910.
1940.
2230.
2300.
2420.
2110.
2300
-
-
1980.
2010.
2140.
2270.
2550.
2690.
2830.
3110.
3100.
-
-
2810.
2940.
3070.
3490.
3630.
3880.
4190.
-
-
3910.
4010.
4130.
4410.
4590.
4700.
4980.
-
$190.
$66.
190.
66.
200.
72.
240.
76.
260.
102.
350.
118.
370.
150.
812/4.41
657/5.46
696/6.66
Curb O.D.
BDCR11
BDCR13
BDCR15
BDCR20
BDCR24
BDCR30
BDCR36
Single Phase
Three Phase■
12”
1Speed 2Speed 1Speed 2Speed Curb Damper
FloAire Direct Drive Up-Blast
Model
No.
DU12
DU33
DU50
DU85
HP
Tip
●RPM Speed
.14
.14
.14
.14
.33
.33
.33
.33
.33
.33
.50
.50
.50
.50
.50
.50
.75
.75
.75
.75
.75
1200
1300
1400
1500
1225
1325
1425
1525
1625
1725
1170
1270
1370
1470
1570
1670
1225
1325
1425
1525
1625
3299
3574
3848
4123
3768
4076
4384
4691
4999
5306
4212
4572
4932
5292
5652
6012
5051
5463
5876
6288
6700
0
612
663
714
766
953
1030
1108
1186
1264
1342
1528
1658
1789
1919
2050
2181
2552
2760
2969
3177
3385
1/8
526
593
650
705
879
963
1045
1127
1209
1290
1436
1573
1710
1846
1981
2116
2446
2662
2878
3092
3306
UL 762 Kitchen Hood Exhaust - *NFPA96 Compliance.
Can Be Mounted On Roof or Wall.
Heavy Duty Constuction. Quick Release Latches.
Variable Speed Control Mounted In Motor Compartment
For Fine Tuning.
External Disconnect Standard. Quick Release Latches.
Forced Fresh Air Cools Motor Compartment.
Fully Welded Leak Proof Grease Drain.
●CFM Against Static Pressure
1/4
3/8
1/2
5/8
3/4
445
514
579
640
794
888
979
1067
1153
1237
1343
1489
1632
1773
1913
2052
2338
2563
2785
3006
3225
331
417
495
567
701
803
901
966
1090
1181
1246
1400
1551
1699
1844
1987
2218
2458
2693
2920
3144
217
308
395
481
594
713
821
922
1020
1116
1122
1301
1469
1622
1773
1922
2094
2343
2587
2827
3063
203
297
385
435
603
730
847
950
1051
979
1185
1366
1542
1701
1854
1955
2228
2480
2727
2969
1
1¼
198
294
428
622
757
876
984
801
1047
1259
1442
1619
1786
1804
2094
2373
2627
2875
474
688
831
975
1217
1430
1615
1409
1790
2114
2404
2685
Price
12” Roof
115/1/60
Curb
$940.
$180.
1140.
190.
1240.
190.
1510.
200.
595
910
1191
1418
1369
1809
2147
2457
●All Lower CFM and RPM listed are attained using the speed control mounted under motor dome.
* When installed according to NFPA96 guidelines.
Curb Hinge Kit-------------------------------$114.
Grease Box (With downspout)-------------92.
Wall Mounting Plate--------------------------110.
Fan Dimensions
W
Model HT
DU12
18
22
DU33 25¼ 25½
DU50 27¼ 28⅞
DU85 30½ 31⅞
B
2
2
2
2
C
19
21
21
24¾
D
18
20
20
24
Wall Plate Dimensions
MODEL
A
B
D
DU12
18½
2
13
DU33 & 50 20½
2
16
24½
2
20
DU85
23
Curb O.D.
F
R
14½ 10⅝
18½ 12⅛
21½ 13¼
23
14⅞
RO
13
16
16
20
WT.
40#
50#
55#
60#
FloAire Commercial Kitchen Hood exhaust
BELT DRIVE UL762 LISTED – *NFPA96 COMPLIANCE
BDU15B – BDU24H CAN BE MOUNTED ON ROOF OR WALL.
HEAVY DUTY CONSTRUCTION. QUICK RELEASE LATCHES. VARIABLE
PITCH MOTOR PULLEY. FULLY WELDED LEAK PROOF GREASE DRAIN.
FORCED FRESH AIR COOLS MOTOR COMPARTMENT.
NON-OVERLOADING BACKWARD CURVE WHEELS.
MODEL
No.
HP CFM
B
C
BDU15 D
E
F
1/4
1/3
1/2
3/4
1
D
E
BDU20 F
G
H
E
F
BDU24 G
H
J
K
1/2
3/4
1
1.5
2
3/4
1
1.5
2
3
5
F
G
BDU30 H
J
K
1
1.5
2
3
5
G
H
BDU36 J
K
L
1.5
2
3
5
7.5
2000
2200
2400
2600
2800
3000
3200
3700
4200
4700
5200
5700
6200
4500
5500
6500
7500
8500
9500
6000
7000
8000
9000
10000
11000
12000
13000
12000
14000
16000
18000
20000
0”
1/4”
1/2”
798/.13
912/.22
878/.18
981/.27
958/.23 1053/.33
1308/.29 1125/.40
1118/.36 1199/.48
1198/.44 1273/.57
1277/.54 1348/.67
672/.31
735/.46
763/.45
817/.61
853/.63
901/.81
944/.85 986/1.05
1035/1.12 1073/1.34
1126/1.44 1160/1.68
530/.43 602/.69
648/.79 708/1.10
768/1.30 818/1.67
884/2.00 930/2.42
1002/2.91 1042/3.39
1119/4.06 1156/4.59
385/.39 733/.69
449/.62 489/.91
513/.93 546/1.25
577/1.32 606/1.68
641/1.81 666/2.21
705/2.41 728/2.84
769/3.13 790/3.60
833/3.98 852/4.48
406/1.00 441/1.51
474/1.59 504/2.17
541/2.37 567/3.02
609/3.37 632/4.10
676/4.62 698/5.45
RPM/BHP
3/4”
1”
1.25”
1021/.32
1083/.38
1146/.45
1212/.52
1280/.61
1349/.71
1419/.82
810/.63
881/.80
956/1.01
1034/1.27
1115/1.57
1199/1.93
668/.97
764/1.43
866/2.05
972/2.85
1081/3.87
1125/.43 1225/.55 1322/.68
1180/.50 1272/.62 1362/.75
1236/.57 1324/.70 1408/.84
1297/.65 1379/.79 1458/.94
1359/.75 1436/.89
1424/.85 1496/1.0
1490/.97
884/.82
954/1.02 1020/1.23
947/1.01 1012/1.22 1073/1.45
1015/1.23 1074/1.47 1131/1.71
1087/1.50 1141/1.75
1162/1.82
487/.93
536/1.23
587/1.61
641/2.07
697/2.63
754/3.30
813/4.09
535/1.23
580/1.57
628/1.99
677/2.49
729/3.09
783/3.79
839/4.62
582/1.55
621/1.92
666/2.38
713/2.92
762/3.56
814/4.30
629/1.90
661/2.29
702/2.78
747/3.36
794/4.03
843/4.82
478/2.09
535/2.82
594/3.74
656/4.89
719/6.31
515/2.70
567/3.51
622/4.51
680/5.73
740/7.21
552/3.34
598/4.23
650/5.30
705/6.60
589/4.01
630/4.97
677/6.12
729/7.49
729/1.26 785/1.57 838/1.9
817/1.77 868/2.13 915/2.5
912/2.44 957/2.85 1000/3.27
1013/3.29 1053/3.75 1092/4.22
1117/4.37 1153/4.87
1.5”
Single Phase
Three Phase
12” Roof
1 Speed 2 Speed 1 Speed ■2 Speed
Curb
1415/.81
1449/.89 $1340.
1490/.98 1370.
1480.
1550.
1680.
$1460. $1460.
1530. 1500.
1550. 1520.
1870. 1540.
-
1870.
1930.
2060.
2110.
2220.
2210.
2350.
2400.
2500.
-
1940.
2250.
2560.
2540.
2840.
-
1830.
1890.
2010.
2090.
2110.
2160.
2180.
2200.
2220.
2380.
2500.
2400.
2480.
2610.
2690.
2760.
2900.
3060.
3350.
701/2.69
737/3.19
779/3.80
825/4.52
3360.
3220.
3410.
-
3750.
-
3070.
3100.
3130.
3260.
3380.
3600.
3670.
3810.
3940.
4220.
626/4.71
662/5.73
705/6.96
4470.
4660.
-
-
4340.
4370.
4470.
4600.
4880.
4910.
5050.
5160.
5380.
-
1085/1.44
1132/1.69
1187/1.97
887/2.24
961/2.88
1042/3.70
1130/4.70
-
$200.
240.
260.
350.
370.
*When Installed complying with NFPA 96 guidelines. ■Three phase two speed motors are single winding variable torque single voltage.
For 3 phase multi-speed option, see inverters on page 23.
Curb O.D.
Wall Plate
Curb hinge kit – BDU15 & 20---$114.
Model
HT
W
B
C
D
F
R
RO
Weigt
A B D
“
“
“ BDU24 – 36---$148.
BDU15
30½
33¾
2
24¾ 24
23
14⅞
16
140# 24¼ 2 20
Wall mounting plate---------------$110.
BDU20
33⅜
38⅞
2
28
27
29½ 18
20
195# 27½ 2 24
Grease Box---------------------------$92.
BDU24
37½
43⅜
2
33
32
30⅝ 23⅞
24
270# 32½ 2 28
(Includes downspout)
BDU30
40
52¾
2
40
39
33½ 24
30
410# BDU36 49-9/16 63-7/16
2
44
43 43-7/16 25¼
36
470# Wall Plate
28
UP-BLAST ROOF FAN
FOR HIGH VOLUME EXHAUSTING
UP-BLAST DISCHARGE - KEEPS EXHAUSTED AIR AWAY FROM
RETURN OR SUPPLY AIR SYSTEMS.
AIR BLAST - TURNS RAIN AND SNOW AWAY.
WIND BAND - PROTECTS THE DAMPERS WHILE OPEN.
HEAVY GUAGE - GALVANIZED STEEL CONSTRUCTION.
MAGNETIC LATCHES - HOLD DAMPERS DOWN WHEN UNIT IS
NOT IN USE.
Non-stock Item. 2 week delivery. Size 24-36 includes freight. 42 & 48 plus freight.
Model
No.
HP
RPM Sones
UBS24 E
F
F
UBS30 G
H
F
UBS36 G
H
J
G
H
UBS42 J
K
H
UBS48 J
K
3/4
1
1
1.5
2
1
1.5
2
3
1.5
2
3
5
2
3
5
1070
1200
755
915
1030
575
705
795
950
510
600
700
790
475
570
660
22
27
17.6
25
31
15.1
22
26
37
16.8
23
37
48
20
27
38
0”
1/8”
1/4”
3/8”
1/2”
7079
7939
10546
12781
14388
11872
14557
16514
19087
16307
19184
22382
25259
22656
27187
31480
6599
7511
9463
11952
13700
10354
13389
15416
18221
14087
17283
20749
23813
20052
25018
29606
6023
7068
7865
10895
12782
8064
11962
14200
17299
11400
15281
19150
22382
16056
25563
27732
5284
6461
5231
9435
11745
5301
9903
12722
16291
7270
12804
17245
20885
10504
19410
25319
3732
5718
3906
7270
10346
3522
6871
10776
15181
8980
15170
19127
7559
14113
22538
Single Three 12”Roof Average
Phase Phase Curb Ship Wt.
$1970. $2130.
2150. 2160.
2380. 2392.
2680. 2520.
2840. 2560.
2834. 2846.
3050. 2880.
3250. 2950.
3030.
2920. 2780.
3060. 2820.
3040.
3280.
3480. 3240.
3380.
3730.
$290.
350.
400.
350#
425#
500.
450#
Curb O.D.
29
325#
450.
Available in 54” & 60”.
Please call for info.
250#
ROOF CURBS
18 Guage Galvanized Steel
1.5 Inches of Rigid Fiberglass Insulation
Neoprene Sealing Strip
Continuously Welded Corners
12” High Standard Insulated Curbs Galvanized Steel.
MODEL
NO.
OD
DIMENSIONS
ID
H
C160
C180
C200
C240
C270
C315
C350
C390
C430
16
18
20
24
27
31½
35
39
43
13
15
17
21
24
28½
32
36
40
12
12
12
12
12
12
12
12
12
FLOAIRE
FOR MODELS
DELHI
DR10, DR12, DU12
DR33, BDCR11, 13, DU33, 50
DR75, BDCR15, BDU15, DU85
BDCR20, BDU20
BDCR24, BDU24
SIS10
SIS12
SIS15 & 18
BDCR30, BDU30
BDCR36, BDU36
S&P
PRICE
LPD6 & 8
$170.
180.
190.
200.
240.
260.
300.
350.
370.
Hinge Kit--------------$114. Grease Collector Box----------------$92.
Hinge Kit (Heavy Duty)-------------$148.00
Approximate Full Load Three Phase Motor
Amperes
Full Load Amperes
Approximate Full Load Single Phase Motor
Amperes
Full Load Amperes
115
Horsepower V
208
V
Minimum
230 Transformer
V
KVA
Minimum
208 230 460 575 Transformer
Horsepower V
V
V
V
KVA
1/2
2.2
2.0
1.0
0.8
0.9
3/4
3.1
2.8
1.4
1.1
1.2
1
4.0
3.6
1.8
1.4
1.5
1/6
4.4
2.4
2.2
.53
1-1/2
5.7
5.2
2.6
2.1
2.1
1/4
5.8
3.2
2.9
.70
2
7.5
6.8
3.4
2.7
2.7
1/3
7.2
4.0
3.6
.87
3
10.7 9.6
4.8
3.9
3.8
1/2
9.8
5.4
4.9
1.18
5
16.7 15.2 7.6
6.1
6.3
3/4
13.8
7.6
6.9
1.66
7-1/2
24
22
11
9
9.2
1
16
8.8
8
1.92
10
31
28
14
11
11.2
1-1/2
20
11
10
2.40
15
46
42
21
17
16.6
2
24
13.2
12
2.88
20
59
54
27
22
21.6
3
34
18.7
17
4.10
25
75
68
34
27
26.6
30
Wall Shutters
Felt strip on louver edges
Counter balanced louvers open wide
Steel frame construction with aluminum louvers
Model
No.
S08
S10
S12
S16
S18
S20
S24
S30
S36
S42
S48
Louver
Size
8x8
10 x 10
12 x 12
16 x 16
18 x 18
20 x 20
24 x 24
30 x 30
36 x 36
42 x 42
48 x 48
Inside tie rods are weather protected
Deep shroud for wind protection
304 Stainless pivot pins, rivets and bushings
Outside
Price
Frame
Gravity Motorized
11¼ x 11¼ $54.
–
13¼ x 13¼
62.
$216.
15¼ x 15¼
66.
228.
19¼ x 19¼
82.
242.
21¼ x 21¼
92.
250.
23¼ x 23¼
96.
258.
27¼ x 27¼ 112.
274.
33¼ x 33¼ 120.
276.
39¼ x 39¼ 190.
340.
45¼ x 45¼ 228.
380.
51¼ x 51¼ 262.
420.
Roof Fan and Duct Dampers
Prevents back-drafts when used with roof fans or inside square duct.
Gravity operated, spring assisted. Closes when fan stops.
Can be used vertically when spring is removed.
Outside
Model
Price
No.
Dimensions Gravity
Motorized
9⅞ x 9⅞
S210
$58.
$200.
11⅞ x 11⅞
S212
60.
204.
13⅞ x 13⅞
S214
64.
210.
15⅞ x 15⅞
S216
70.
214.
17⅞ x 17⅞
S218
74.
218.
19⅞ x 19⅞
S220
76.
220.
21⅞ x 21⅞
S222
80.
224.
23⅞ x 23⅞
S224
96.
230.
27⅞ x 27⅞
S228
108.
240.
29⅞ x 29⅞
S230
118.
250.
31⅞ x 31⅞
S232
124.
256.
35⅞ x 35⅞
150.
284.
S236
Ceiling Shutters
For use with whole-house fans.
Standard Ceiling Shutter
No Joist Cut Ceiling Shutter
INSIDE
DIMENSION Price
FAN
MODEL SIZE
OUTSIDE
DIMESION
AS10
24”
26” x 26”
24” x 24”
$156.
CSS24
24”
24” x 32”
22” x 30”
$196.
AS11
30”
32” x 32”
30” x 30”
180.
CSS30
30”
32” x 35”
30” x 33”
230.
AS16
36”
34” x 45”
32” x 43”
242.
CSS36
36”
32” x 43”
30” x 40”
240.
AS18
42”
36” x 48”
34” x 46”
274.
31
OUTSIDE
INSIDE
DIMENSION DIMENSION
MODEL
FAN
SIZE
Price
Fan and Blower Motors
Open Drip Proof
Split Phase
One and Two Speed
HP
RPM
VOLTS
FRAME
CAT. NO.
AMPS
PRICE
1/4
1/4
1/3
1/3
1/2
1725
1725/1140
1725
1725/1140
1725/1140
115
115
115
115
115
48
48
48
48
56
S102
H171
S106
H173
H175
5.7
4.2/2.7
6.5
5.7/3.2
8.0/4.2
$196.
322.
234.
406.
426.
Single Phase
Capacitor Start
One and Two Speed
1/4
1/3
1/2
3/4
3/4
3/4
1.0
1.0
1.0
2.0
1725
1725
1725
1725
1725/1140
1725/1140
1725
1725/1140
1725/1140
1725
115/230
115/230
115/230
115/230
115
208-230
115/230
115
208-230
115/208-230
48
48
56
56
56
56
56
56
56
145T
G1114
5.2/2.6
S110
7.0/3.5
S112
9.1/4.5
S114
10.4/5.2
C420
9.0/6.4
C486 14.3-4.4/3.1-3.2
S116
13.6/6.8
C475
10.8/7.4
C476
5.3-5.4/3.6-3.7
I147
21/11.3-10.5
$286.
286.
352.
418.
764.
694.
560.
954.
990.
363.
Three phase
Single Speed
Can be used with Inverter Vector Controls
Inverter/Vector Controls, Page 23
HP
RPM
VOLTS
FRAME
CAT. NO.
1/4
1/3
1/2
3/4
1.0
1.0
1.5
2.0
2.0
3.0
5.0
5.0
7.5
10
1725
1725
1725
1725
1750
3600
1750
1750
3600
1750
1750
3600
1750
1750
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
48
48
56
56
143T
56
145T
145T
145T
182T
184T
184T
213T
215T
G044
K527
K381
G084
E715
K000
E716
E717
E1012
E718
E719
E1704
E720
E721
AMPS
1.2-1.3/.65
1.5-1.6/0.8
2.3-2.2/1.1
2.7-2.8/1.4
3.3-3.1/1.55
3.7-3.7/1.85
4.6-4.4/2.2
6.2-5.8/2.9
5.4/2.7
8.8-8.2/4.1
14.4-13.0/6.5
14-12.4/6.2
21.4-19.6/9.8
28.6-26.4/13.2
PRICE
$322.
374.
314.
362.
362.
434.
390.
426.
576.
498.
568.
570.
802.
1030.
TEFC AND EXPLOSION PROOF IN SINGLE AND THREE PHASE, AND TWO SPEED THREE PHASE MOTORS ALSO AVAILABLE.
32
Pulleys - Sheaves - Belts
Variable Pitch Sheaves
No.
1VL34
1VL40
1VL44
1VP50
1VP56
1VP62
2VP42
2VP50
2VP56
4L V-Belts
Pitch Range
4L & A
5L & B
O.D.
Bores
Price
No.
1.9-2.9
2.4-3.4
2.8-3.8
3.4-4.4
4.0-5.0
4.6-5.6
2.6-3.6
3.4-4.4
4.0-5.0
3.15
3.75
4.15
4.75
5.35
5.95
3.95
4.75
5.35
1/2, 5/8
1/2, 5/8, 7/8
1/2, 5/8, 7/8
5/8, 7/8, 1⅛
5/8, 7/8, 1⅛
7/8, 1⅛
1⅛
7/8, 1⅛
1⅛, 1⅜
$30.
36.
46.
60.
88.
140.
126.
146.
172.
4L200
4L210
4L220
4L230
4L240
4L250
4L260
4L270
4L280
4L290
4L300
4L310
4L320
4L330
4L340
4L350
4L360
4L370
4L380
4L390
4L400
4L410
4L420
4L430
4L440
4L450
4L460
4L470
4L480
4L490
4L500
4L510
2.4-3.2
2.7-3.7
3.1-4.1
3.7-4.7
4.3-5.3
4.9-5.9
2.9-3.9
3.7-4.7
4.3-5.3
AK AND BK PULLEYS
No.
AK28
AK30
AK44H
AK46
AK51
AK54
AK56H
AK64
AK64H
AK74
AK74H
AK84
AK84H
AK94
AK94H
AK104
AK114H
AK124H
2AK51H
2AK64H
BK45
BK50
BK55
BK75H
2BK52H
2BK70H
2BK80H
2BK90H
Pitch
4L & A
5L & B
2.6
2.8
4.0
4.2
4.7
5.0
5.2
6.0
6.0
7.0
7.0
8.0
8.0
9.0
9.0
10.0
11.0
12.0
4.7
6.0
3.5
3.9
4.0
4.4
4.5
4.9
6.5
6.9
4.2
4.6
6.0
6.4
7.0
7.4
8.0
8.4
O.D.
2.8
3.05
4.25
4.45
4.7
5.25
5.45
6.25
6.25
7.25
7.25
8.25
8.25
9.25
9.25
10.25
11.25
12.25
4.95
6.25
4.25
4.75
5.25
7.25
4.95
6.75
7.75
8.75
Bores
3/4
1
1, 1-3/16, 1-7/16
3/4, 5/8, 1
3/4, 1
3/4, 1
1, 1-3/16, 1-716
3/4, 1
1, 1-3/16, 1-7/16
3/4, 1
1, 1-3/16, 1-7/16
1
1, 1-3/16, 1-7/16
1
1, 1-3/16, 1-7/16
1
1, 1-3/16, 1-7/16
1, 1-3/16, 1-7/16
1, 1-3/16, 1-7/16
1, 1-3/16, 1-7/16
1
1
1
1, 1-3/16, 1-7/16
1, 1-3/16, 1-7/16
1, 1-3/16, 1-7/16
1, 1-3/16, 1-7/16
1, 1-3/16, 1-7/16
H BUSHING – 1” - 1-3/16” - 1-7/16”………..$18.
Size B V-Belts
No.
B36
B38
B40
B42
B44
B46
B48
B50
B52
B54
B56
B58
B60
B62
B64
B66
B68
33
Outside
Length
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
Price
$28.00
28.00
32.00
32.00
32.00
36.00
36.00
40.00
40.00
40.00
40.00
40.00
42.00
42.00
42.00
46.00
46.00
Price
$26.
28.
30.
48.
52.
54
46.
62.
50.
74.
62.
90.
72.
100.
84.
106.
98.
108.
100.
114.
50.
54.
58.
72.
100.
128.
148.
152.
Outside
Length
20”
21”
22”
23”
24”
25”
26”
27”
28”
29”
30”
31”
32”
33”
34
35”
36”
37”
38”
39”
40”
41”
42”
43”
44”
45”
46”
47”
48”
49”
50”
51”
Price
$10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
16.00
16.00
16.00
16.00
16.00
20.00
20.00
20.00
20.00
20.00
24.00
24.00
28.00
28.00
28.00
28.00
28.00
Size A V-Belt
No.
A20
A22
A24
A26
A28
A30
A32
A34
A36
A38
A40
A42
A44
A46
A48
A50
A52
A54
A56
A58
A60
A62
A64
Outside
Length
Price
22”
24”
26”
28”
30”
32”
34”
36”
38”
40”
42”
44”
46”
48”
50”
52”
54”
56”
58”
60”
62”
64”
66”
$12.00
12.00
12.00
12.00
12.00
12.00
16.00
16.00
16.00
20.00
20.00
20.00
24.00
24.00
28.00
28.00
28.00
32.00
32.00
32.00
32.00
32.00
32.00
Terminology
Exhaust Hood Velocities
Material Conveying Velocities
Recommended Air Changes
For any engineering or application questions please
contact us at 617-868-1310, email fandistr@verizon.net
Fax 617-864-3138. Equipment literature can be downloaded
from our website www.fandistr.com
34
SPECIALISTS IN AIR MOVING EQUIPMENT
Fans – Blowers - Accessories
Stocked In Cambridge, MA
Founded in 1962, Fan Distributors has been a leading supplier of ventilating equipment in the Northeast. More
recently we have expanded our shipments to customers throughout the country and as far away as Hawaii.
Our belief that helping our customers apply the correct system equipment and supplying that equipment in a
cost effective timely manner has brought many referrals and repeat business.
Please contact us for any information or ventilating products not found in our catalog.
Commercial Kitchen Hoods and Tempered Air Supply Units are Available.
Direct Fired, Compact Direct Fired, Indirect Fired and Electric.
Easy Wire Control Panels Available on all Models.
_______________________________________________________________________________

View the Fan Distributors 2010 Catalog

Transcription

Similar documents

Berner Torantriebe