entrances - Oldcastle BuildingEnvelope

Transcription

entrances
Product Selector
All Glass
Standard Entrances
NS-212/MS-375/
WS-500
Specialty Entrances
Terrace Door
Loose Hardware
& Fabrication
See “Blast Mitigation”
and “Hurricane Resistant”
sections for additional
Entrance products
Section 6
entrances
Target
West Hollywood Gateway
West Hollywood, CA
Architect: MBH Architects
5/2011
5/2011 S.6
S.6 P.1
P.1
entrances
Entrances: Product Selector
P.5
All Glass
Our entrance systems are all-glass portals
engineered to allow architects and designers
extraordinary flexibility to convey the visual
impact they desire. Our entrances can be
incorporated into a Total Vision System® using
only corner fittings to assemble sidelites,
transoms and stabilize supports or into a
Stackwall® Structural Glass Wall System.
Type A
P.6
Type F
P.8
Type BP
P.10
Type P
P.11
Type WP
P.13
Bi-Parting
P.15
2425 Olympic Boulevard Suite 525-East Santa Monica, CA 90404
1-866-OLDCASTLE (653-2278) oldcastlebe.com
n
5/2011 S.6 P.2
n
n
Standard Entrances NS-212/
MS-375/WS-500
P.17
entrances
Oldcastle BuildingEnvelope™ Aluminum
Entrance doors are available in standard
narrow, medium or wide stiles to meet a wide
range of traffic requirements.
Specialty Entrances
P.20
Oldcastle BuildingEnvelope™ offers a variety
of high performance entrance systems for
improved thermal performance, enhanced
durability and high traffic applications.
Thermal Clad
P.20
Thermal Entrance Systems are available in
narrow, medium or wide stiles to meet
every need. Whether it’s an exceptional
barrier to air infiltration, a “green” initiative,
durability or simply to offer dual-color
options, Thermal Entrance Systems by
Oldcastle BuildingEnvelope™ are the
right choice.
Rugged Entrances
P.24
Entrance™
Rugged
systems are engineered
to offer long-lasting durability for high-traffic
areas.
PerforMax™
P.28
The PerforMax™ entrance system by
Oldcastle BuildingEnvelope™ is not just
another heavy wall door. This engineered
entrance system is designed to handle the
day-to-day abuse of high traffic areas and
is considered the most durable aluminum
door on the market today.
5/2011 S.6 P.3
entrances
Terrace Door
P.31
Terrace Door is available in in-swinging,
out-swinging and sliding versions offering
high-performance and versatility.
Terra Swing 61E
P.31
Terra Swing 62E
P.34
Series 2266
P.37
Terra Slide – 60E
P.41
This heavy-duty sliding door has been
designed and tested to comply with strict
hurricane impact-rated codes.
Loose Hardware
P.44
See “Blast Mitigation” and “Hurricane
Resistant” sections for additional Entrance
products
n
5/2011 S.6 P.4
n
n
Introduction
Oldcastle BuildingEnvelope™ entrance systems can employ swinging or sliding doors, as well as
stacking or bifold panels. Many variations are available with Oldcastle BuildingEnvelope™ tempered
glass entry doors. They can be used with corner patches only, with continuous rails only or in
combinations of the two.
entrances
Entrances: All Glass
Specifications
For specifications on All Glass Entrances products, go to
www.oldcastlebe.com/products/entrances/all-glass/brite-vue-all-glass-door and click on “Specifications”.
Features Data
Features
lass entrances should be virtually invisible and trouble-free. With Oldcastle BuildingEnvelope™
G
glass systems you get just that. As a testament to properly designed fittings and pivots,
Oldcastle BuildingEnvelope™ glass systems have been operating trouble free for many years
in applications nationwide. Our glass systems are also designed to provide clean, unobtrusive
lines and come in many configurations and finishes to complement virtually any surrounding surface.
5/2011 S.6 P.5
entrances
Entrances: All Glass—
Type A
Detail Scale = 1/4 Size
HD505
HD522
VD502
VD504
HD504
VD503
HD503
Detail numbers (e.g., H8801) reference website detail numbers.
For those details not shown in this catalog and for additional information see:
http://www.oldcastlebe.com/products/entrances/all-glass/
brite-vue-all-glass-door
Elevation Sample J:
Glass Systems
1/4"
2-1/16"
Center Pivot Patch
TH-7 Threshold
7"
1/2"
1/2" Tempered
Glass
3/4"
Opening
Dimension
2"
1 x 2 x .125
Alum Channel
Opening
Dimension
1/2" Tempered Glass
HD505
HD505
HD504
Transom Pivot
Patch
Door Opening
Center Pivot Patch
1/2 Tempered Glass
1 x 1 x .125
Alum Channel
1"
2-1/16"
Door
Opening
1/8"
2-1/16"
HD504
1/2 Tempered
Glass
HD503
HD503
HD522
HD522
n
5/2011 S.6 P.6
n
n
entrances
Type A
“F” Patch Lock
“F” Patch Lock
1/2" Tempered
Glass
1/2" Tempered
Glass
1/8"
G.S.
G.S.
VD502
VD502
Pivot Patch Fitting
1/2" Tempered
Glass
1/2" Tempered Glass
6-9/16"
1/8"
DLO
DLO
VD504
VD504
1/8"
1/2" Tempered Glass
Opening Dimension
VD503
VD503
5/2011 S.6 P.7
entrances
Type F
HD505
HD522
VD504
VD502
HD516
VD503
HD503
Elevation Sample J:
Glass Systems
Patch Lock
TH-7 Threshold
1/4"
2-1/16"
2"
Opening
Dimension
Opening
Dimension
1/2" Tempered Glass
1 x 2 x .125
Alum Channel
3/4"
1/2"
1/2" Tempered
Glass
HD505
HD505
HD516
Transom Pivot
Patch
1/2" Tempered
Glass
Door Opening
Center Pivot
Patch
1/2" Tempered Glass
1 x 1 x .125
Alum Channel
1"
2-1/16"
Door
Opening
1/8"
2-1/16"
HD516
HD503
HD503
HD522
HD522
n
5/2011 S.6 P.8
n
n
entrances
Type F
Pivot Patch Fitting
1/2" Tempered
Glass
1/2" Tempered
Glass
1/8"
G.S.
G.S.
VD502
1/2" Tempered
Glass
1/2" Tempered Glass
6-9/16"
1/8"
DLO
DLO
VD504
VD502
VD504
1/8"
1/2" Tempered Glass
Opening Dimension
VD503
VD503
5/2011 S.6 P.9
entrances
Type BP
HD505
HD522
VD512
VD512
HD524
HD512
Elevation
Sample
J: Glass
1/2"
Tempered
Glass Systems
1/2" Tempered Glass
Neoprene Gasket
3-1/2" Square Rail
Neoprene Gasket
3-1/2" Square Rail
1/4"
3-1/2"
Sidelite Track
1/2"
1/2"
7"
1/4"
HD505
HD505
3/4"
1/2" Tempered
Glass
TH-7 Threshold
1/4"
3-1/2"
Opening
Dimension
2"
1 x 2 x .125
Alum Channel
HD512
HD512
Transom Pivot
Patch
2-1/16"
Door
Opening
1/8"
2-1/16"
HD524
HD524
Center Pivot
Patch
1/2" Tempered
Glass
HD522
HD522
1/8"
G.S.
G.S.
VD512
VD512
n
5/2011 S.6 P.10
n
n
entrances
Type P
HD505
HD526
VD512
VD512
VD513
HD511
HD512
HD514
Elevation Sample L:
Glass Systems
1/2" Tempered
Glass
G.S.
1/8"
G.S.
1/8"
Opening
Dimension
VD512
VD512
VD513
VD513
5/2011 S.6 P.11
entrances
Type P
1/2" Tempered
Glass
Opening
Dimension
2"
1 x 2 x .125
Alum Channel
Neoprene
Gasket
10" Square
Rail
1/2" Tempered
Glass
10"
HD505
HD505
1/2" Tempered
Glass
TH-4
Threshold
1/4"
3/4"
4"
1/2"
Overhead
Concealed Closer
1/8"
1-3/4"
1 x 1 x .125" Alum Channel
FG-1128 Header
HD514
HD514
3-1/2"
Door
Opening
FG-1129 Filler
3-1/2" Square Rail
Neoprene Gasket
1/2" Tempered Glass
1/2" Tempered Glass
HD526
Neoprene Gasket
3-1/2" Square Rail
HD526
Sidelite Track
1/4"
3-1/2"
1/2" Tempered Glass
4"
1/4"
1/2"
1/4"
TH-4 Threshold
HD512
HD512
1/2"
3/4"
3-1/2"
Neoprene Gasket
3-1/2" Square Rail
HD511
HD511
n
5/2011 S.6 P.12
n
n
entrances
Type WP
HD505
HD526
VD507
VD513
VD508
HD512
HD511
HD514
Neoprene Gasket
Neoprene Gasket
Neoprene Gasket
1/2" Tempered Glass
Type (WP) Style
1/8"
Type (WP) Style
Type (WP) Style
1/8"
DLO
5/8"
5/8"
D.S.
D.S.
VD507
Elevation Sample L:
Glass Systems
5/8"
D.S
D.O.
G.S.
VD508
VD507
VD508
1/2" Tempered
Glass
1/8"
Opening
Dimension
VD513
VD513
5/2011 S.6 P.13
entrances
Type WP
1/2" Tempered
Glass
Opening
Dimension
2"
1 x 2 x .125
Alum Channel
Neoprene
Gasket
10" Square
Rail
1/2" Tempered
Glass
10"
HD505
HD505
1/2" Tempered
Glass
TH-4
Threshold
4"
1/2"
3/4"
FG-1129 Filler
HD514
HD514
3-1/2"
Door
Opening
1/4"
Overhead
Concealed Closer
1/8"
1-3/4"
1 x 1 x .125" Alum Channel
FG-1128 Header
3-1/2" Square Rail
Neoprene Gasket
1/2" Tempered Glass
1/2" Tempered Glass
HD526
Neoprene Gasket
3-1/2" Square Rail
HD526
1/4"
HD512
HD512
1/2"
4"
1/4"
1/4"
TH-4 Threshold
1/2"
Neoprene Gasket
3-1/2" Square Rail
3-1/2"
3/4"
Sidelite Track
3-1/2"
1/2" Tempered Glass
HD511
HD511
n
5/2011 S.6 P.14
n
n
entrances
Bi-Parting
HD531
VD532
VD533
VD531
HD532
Elevation Sample K:
Glass Systems
Neoprene Gasket
3-1/2"
3-1/2" Square Rail
3-1/2" Square Rail
Neoprene Gasket
3-1/2"
Opening Dimension
1/2" Tempered
Glass
Sidelite Track
Slider Track
1/2" Tempered Glass
HD531
HD532
HD531
HD532
5/2011 S.6 P.15
entrances
Bi-Parting
Neoprene Gasket
3-1/2" Square Rail
1/2" Tempered Glass
D.S.
Neoprene Gasket
3-1/2" Square Rail
1/2" Tempered Glass
D.S.
1/8"
VD533
VD533
D.S.
1/2" Tempered Glass
3-1/2" Square Rail
Neoprene Gasket
2"
Neoprene Gasket
3-1/2" Square Rail
1/2" Tempered Glass
D.S.
1/8"
Neoprene Gasket
3-1/2" Square Rail
1/2" Tempered Glass
D.S.
Opening Dimension
VD531
VD531
VD532
VD532
n
5/2011 S.6 P.16
n
n
Introduction
All Oldcastle BuildingEnvelope™ Aluminum entrance systems incorporate heavy-duty, tubular
construction and precise machining to insure every door offers unparalleled quality and performance.
These entrances are durable and virtually maintenance free.
entrances
Entrances: Standard NS-212,
MS-375, WS-500
Specifications
For specifications on Standard Entrances products, go to
www.oldcastlebe.com/products/entrances/aluminum/ns-212-narrow-stile and click on “Specifications”.
Features Data
Features
n
Maximum security hook bolt locks
n
1" diameter push/pulls
n
Adjustable astragal with dual weathering on pairs of doors
n
Mechanically fastened shear blocks and welded corner construction
n
Adaptable to virtually all hardware
n
4" to 10" one piece bottom rail options
n
Glass stops with bulb gaskets
n
1/4", 3/8", 5/8" and 1" glazing options
n
Adaptable to meet local building codes
n
Limited lifetime warranty
5/2011 S.6 P.17
Elevation Sample D:
Curtain Wall
Elevation Sample D:
Curtain Wall
Elevation Sample D:
Curtain Wall
entrances
MS-375, WS-500
1
7
3
14
9
2
Elevation Sample E:
Narrow Stile
Entrances
16
8
Elevation Sample E:
Medium Stile
Entrances
8
Elevation Sample E:
Wide Stile
Entrances
3"
D-1
D-2
D-8
1
7
14
D-3
D-6
D-13
2-1/8"
3-3/4"
3
9
HD1053
5"
16
Standard Doors - Stiles
VD1012
D-71
D-71
VD1002
VD1023
4"
8"
8"
2-1/4"
4"
www.oldcastlebe.com/products/entrances/aluminum/ns-212-narrow-stile
D-2
2
8
8
Standard Doors - Btm Rail
HD1057
HD1057
n
5/2011 S.6 P.18
HD1053
n
n
entrances
MS-375, WS-500
Bottom
Rail
3/16"
3/16"
Bottom
Rail
D-118/D120
TH-43
11/16"
11/16"
TH-49
4"
4"
21
C
High Performance
Threshold
22
B
1/4" GLASS
1/4" GLASS
Standard Threshold
V-32
S-81
S-148
V-32
C
B
1/4" GLASS
3/4"
D-73
D
5/8" GLASS
BB
C
1/4" GLASS
1" GLASS
1/4" GLASS
S-120 V-32
S-46
V-32
8"
3/8" GLASS
1/2"
AA
E
1/4" GLASS
C
B
1/4" GLASS
1/4" GLASS
1/2"
1/2"
CC
B
1/4" GLASS
1/4" GLASS
D
26
3/8" GLASS
HD1098
D
1" GLASS
EE
A
GLASS
Glazing5/8"Options
E
3/8" GLASS
1" GLASS
A
5/8" GLASS
1" GLASS
D-11
D-2
30
D-62
8"
4"
29
6-1/2"
1-7/8"
A
1" GLASS
A
5/8" GLASS
D
1/2"
5/8" GLASS
3/4"
3/8" GLASS
HD1076
E
3/8" GLASS
E
VIP 1 Panic
D-135
V-32
S-147
D-74
DD
D-21
31
D-62
D-71
32
D-62
HD1095
HD1083
Muntins
33
HD1085
5/2011 S.6 P.19
Introduction
Designed to be thermally efficient, each of these doors is thermally enhanced using a thermal isolator
with interior cladding. In addition to making the door more energy efficient, the interior cladding provides
the availability of dual colors to match design creativity by offering different interior and exterior looks.
Available as a single-source package that includes the door, fully integrated door frame and integrated
hardware, Thermal Entrance Systems from Oldcastle BuildingEnvelope™ are the right choice.
entrances
Entrances: Specialty Entrances—
Thermal Clad
Specifications
For specifications on Specialty Entrance Thermal Clad products, go to
www.oldcastlebe.com/products/entrances/aluminum/ns-212-thermal-narrow-stile
and click on “Specifications”.
Features Data
Features
n
Both door and frame are thermally isolated
n
Available in Narrow, Medium and Wide stile doors
n
Engineered for Oldcastle BuildingEnvelope™:
– FG-3000 Thermal Multiplane system
– HP-1750 Window Wall system
– Reliance™ Curtain Wall system
n
Accepts 1" infills
n
Door sizing up to 4'0" x 8'0"
n
Full array of operating hardware including butt hinges, offset pivots and continuous gear hinges
Thermal Performance:
– NS-212T U-factor =
– MS-375T U-factor =
U-factor =
– WS-500TU-factor =
n
n
0.66,
0.67,
0.54,
0.66,
CRF
CRF
CRF
CRF
=
=
=
=
52
45 for clear glass
45 for Sunglass (Low-E)
52
Two-color finishing capability
5/2011 S.6 P.20
Elevation Sample D:
Curtain Wall
Elevation Sample D:
Curtain Wall
Elevation Sample D:
Curtain Wall
entrances
Thermal Clad
HD4233
HD4133
HD4333
VD4239
VD4139
VD4339
HD4101
HD4102
Elevation Sample E:
Narrow Stile
Entrances
HD4103
Elevation Sample E:
Medium Stile
Entrances
Elevation Sample E:
Wide Stile
Entrances
http://www.oldcastlebe.com/products/entrances/aluminum/
ns-212-thermal-narrow-stile
DS-109
3/4"
D-209
D-200
S-184
HD4133
HD4133
4"
DS-109
D-197
D-2
D-217
D-200
D-200
3/4"
D-1
DS-109
D-215
D-212
3/4"
D-196
3"
D-38
2-1/4"
2"
FG-3389
FG-3389
1/8"
2"
1/8"
AC-131-1
FG-3389
1/8"
2"
AC-131-1
AC-131-1
S-184
HD4233
S-184
HD4233
HD4333
HD4333
n
5/2011 S.6 P.21
n
n
entrances
Thermal Clad
FG-3389
DS-114
D-195
D-199
D-200
2-1/8"
D-6
VD4339
VD4339
D-229
D-214
D-197
D-2
3/4"
D-200
D-242
3/4"
3/4"
D-200
D-61
3/16"
D-210
D-118W/D-120
D-71
8"
D-210
D-229
10"
1/2"
TH-49
3/4"
5"
3/8"
2"
VD4239
VD4139
HD4101
D-118W/D-120
TH-49
HD4102
HD4102
D-225
3/16"
1/2"
HD4101
3/16"
D-229
11/16"
4"
3/4"
VD4239
VD4139
11/16"
D-13
3-3/4"
3/8"
2"
3/4"
D-242
D-200
D-218
1/2"
3/8"
2"
DS-114
D-200
D-213
D-216
2 1/4"
D-3
FG-3389
DS-114
11/16"
FG-3389
HD4103
HD4103
5/2011 S.6 P.22
3/4"
3/4"
entrances
Thermal Clad
3/4"
D-219
D-221
D-19
D-2
4"
4"
D-200
1-7/8"
D-224
D-11
D-223
D-242
D62
3/4"
D-71
12"
D-200
3/4"
D-200
D-242
D-220
S184
HD4105
HD4106
D-210
HD4105
Optional Muntin
HD4106
1/2"
11/16"
3/16"
Optional Muntin
HD4104
Optional Bottom Rail
HD4104
3/4"
2-1/8"
D24
D69
AS-6
1/8"
2-1/8" 3/4"
1/8"
3-3/4"
3-3/4"
D-218
D-242
D-242
D-200
2-1/4"
D-63
2-1/4"
D-12
D-213
D-216
D-200
D-216 D-213
D-199
D-195
2 1/4"
D-200
D-195
D-218
D-242
D-242
D-200
D-25
D-70
AS-6
5"
1/8"
5"
Meeting Stiles
n
5/2011 S.6 P.23
n
n
Introduction
The heavy-duty, tubular door members are securely attached with bolted corner blocks and back-up
plates with two welded points per corner. The systems are monumental with 3/16" wall thickness and
a door depth of 2" for even more strength. There are no exposed screws or fasteners to interrupt the
door’s smooth, clean lines.
entrances
Rugged
Specifications
For specifications on Rugged Entrances products, go to
www.oldcastlebe.com/products/entrances/aluminum/rugged-ms-375-medium-stile
Features Data
Features
n
Heavy-duty tubular construction with 3/16" wall thickness and 2" depth
n
Dual moment door corner construction with heavy corner shear block and steel back up plates
n
Maximum security hook bolt locks
n
1" diameter push/pulls
n
Adjustable astragal with dual weathering on pairs of doors
n
Adaptable to a wide range of hardware
n
8" and 10" bottom rail options
n
Glass stops with bulb gaskets
n
1/4", 3/8", 5/8" and 1" glazing options
n
Adaptable to meet local building codes
n
Limited lifetime warranty
5/2011 S.6 P.24
Elevation Sample D:
Curtain Wall
Elevation Sample D:
Curtain Wall
Elevation Sample D:
Curtain Wall
entrances
Rugged
1
1
3
14
9
8
Elevation Sample E:
Narrow Stile
Entrances
16
8
Elevation Sample E:
Medium Stile
Entrances
8
Elevation Sample E:
Wide Stile
Entrances
D-1886
3"
3"
4"
rugged-ms-375-medium-stile
1
D-1906
D-1886
D-1892
1
14
D-1880
D-1902
2-1/2"
3-3/4"
3
9
5"
16
VD1012
8"
VD1023
8"
VD1002
8"
HD1053
D-1888
D-1888
D-1888
8
8
8
HD1057
HD1057
HD1057
n
5/2011 S.6 P.25
n
n
entrances
Rugged
Bottom
Rail
3/16"
3/16"
Bottom
Rail
D-118/D120
TH-43
11/16"
11/16"
TH-49
4"
4"
21
22
C
High Performance
Threshold
B
1/4" GLASS
1/4" GLASS
Standard Threshold
V-32
S-81
S-148
V-32
C
B
1/4" GLASS
3/4"
D-1889
D
1/2"
AA
E
5/8" GLASS
BB
C
1/4" GLASS
1" GLASS
1/4" GLASS
S-120 V-32
8"
3/8" GLASS
S-46
C
1/4" GLASS
1/2"
1/2"
CC
1/4" GLASS
V-32
S-147
D
E
3/8" GLASS
5/8" GLASS
E
3/8" GLASS
A
1" GLASS
A
5/8" GLASS
1" GLASS
3/4"
VIP1 Panic
EE
D
A
GLASS
Glazing5/8"Options
3/8" GLASS
D
E
3/8" GLASS
1" GLASS
A
5/8" GLASS
1" GLASS
D-1891
D-62
D-1893
8"
D-1892
5-3/4"
29
4"
1/2"
DD
B
1/4" GLASS
28
V-32
B
1/4" GLASS
D-74
1/4" GLASS
D-1888
30
D-62
30
D-62
31
Muntins
31
32
HD1083
5/2011 S.6 P.26
entrances
Rugged
AS-6
D-1907
D-1908
2-1/2"
2-1/2"
3/4"
AS-6
D-1883
D-1881
3-3/4"
3-3/4"
3/4"
AS-6
D-1901
D-1903
5"
5"
Meeting Stiles
n
5/2011 S.6 P.27
n
n
Introduction
Long-lasting durability makes this entrance system ideal for use in schools, malls and sports arenas.
PerforMax™ provides the strength needed for virtually any demanding application, without sacrificing
aesthetics. The power of PerforMax™ comes from within. Steel reinforcement at key hardware attachment
areas, such as hinge and closer, provides optimum performance in areas historically plagued with
maintenance problems. All steel is coated with a zinc chromate protective film to prevent corrosion. This
sturdy door combined with special anchoring features and hardware package provides long-term, low
maintenance operation for almost any application. PerforMax™ is another example of our commitment to
design systems capable of meeting the challenges of today’s demanding marketplace.
entrances
PerforMax™
Specifications
For specifications on PerforMax™ products, go to
www.oldcastlebe.com/products/entrances/aluminum/performmax-ws-500-wide-stile
Features Data
Features
n
Continuous Steel Reinforcing
n
Top rail includes a continuous 1/4" x 4" internal steel bar used for mounting surface closer body
n
n
n
n
Door header includes an extruded doorstop with a 1/4" x 2" continuous internal steel bar for
additional reinforcement for mounting the surface closer shoe
Door stile consists of a continuous 3/16" x 1-1/4" internal steel bar and frame jamb consists of a
continuous 1-1/4" x 1-1/4" x 3/16" internal steel angle used to mount hinge hardware
Entire frame unit is properly secured by applying a heavy 2" x 3" x 3/16" clip anchor attached to
the internal steel reinforcing at the head and sill and mounted directly to the surrounding structure
Common hinge jambs are available with a 4" x 9-1/2" x 3/16" steel plate welded to the internal
steel and secured directly to the structure
Finishes
n
Factory-anodized finishes
n
Factory-painted Kynar 500®/Hylar 5000® finishes, meeting all provisions of AAMA 2605
Hardware
n
n
n
High quality, surface applied hardware
Hinging options include three (3) 5" heavy duty stainless steel butt hinges per leaf or a continuous
gear hinge
ADA electronic hardware available
5/2011 S.6 P.28
Elevation Sample D:
Curtain Wall
entrances
PerforMax™
H0452
V0459
V0454
HD1049
Elevation Sample E:
Entrances
10"
1/4"
2"
D-177
D-61
FG3000-FP-20/21
V-231
TH-54
3/4"
3/4"
FG-3310
6"
3/4"
performmax-ws-500-wide-stile
HD1049
H0452
Door Head - H0452
HD1049
n
5/2011 S.6 P.29
n
n
FG-2120
FG-3308
FG-2170
D-176
entrances
PerforMax™
FG-3308
D-13
V0459
V0454
Door Jamb - V0454
Door Jamb - V0459
3/4"
D-25
D-70
5"
5"
3/4"
Meeting Stiles
5/2011 S.6 P.30
Introduction
Series 61E Eurotherm® thermal barrier technology allows for multi-color finish combinations.
Specifications
entrances
Terrace Door Terra Swing 61E
For specifications on Terrace Door products, go to
www.oldcastlebe.com/products/entrances/aluminum/terrace-door-swing/specifications
Door Size Guidelines
(Width x Height)
Single Door
Sidelite Door
MIN
MAX MIN
30" x 78"
48" x 96"
36" x 78"
(Leaf width not less than 28-5/8")
MAX 96" x 96"
(Leaf width not greater than 46-5/8")
Transom Door
Double and French Doors
MIN
MIN
MAX 30" x 78"
(Leaf height not less than 78")
MAX 48" x 96"
60" x 82-1/2"
96" x 96"
(Leaf height not greater than 94-5/8")
Performance
Design
Uniform Load Allowable
No Water
U-Value
CRF
Pressure
Structural Air Infiltration Leakage Class
Class
(PSF)
(PSF)
(CFM/SQ FT) @__PSF
In-swinging50 75
0.10 10 60 55
Out-swinging65 97.5
0.10 12
60
55
(FHA) Out-swinging65
97.5
0.10
12
60
55
Oldcastle BuildingEnvelope™ architectural terrace door products commonly outperform the AAMA standardized test values
shown above. Optional higher performance requirements can be accommodated to satisfy specific project conditions; please
consult your Oldcastle BuildingEnvelope™ representative if such conditions are encountered.
Features and Benefits Data
Features
Benefits
3-1/4" frame, 2-1/4" door leaf depth
.125" minimum wall thickness
Modular compatibility with Moduline Series14E
and 14PF
Tubular frame, sash and meeting rails
Enhanced architectural performance
Extruded screw spline joinery frame
Strength and durability
Eurotherm thermal framing
Hairline tight frame intersections
Corner-keyed, sealed and hydraulically staked
door leaf
Dual color/finish combinations and energy
efficiency
Replaceable, high quality compression seals
Structural performance, lifecycle stability
Stainless steel limit-friction adjuster-door stop
Easy and cost-effective maintenance
High quality cylinder and multipoint locks
Corrosion resistant, attractive and smooth leaf
operation
n
n
n
n
n
®
n
n
n
n
FHA compliant handicap sill option
n
Integral transoms and sidelites
n
n
n
n
n
n
n
n
n
Security and effortless engagement
n
Versatility to meet assisted requirements
n
Narrow sightlines in multi-lite single unit
construction
n
5/2011 S.6 P.31
entrances
AAMA Class
ATD-AW50 (In-swinging) / ATD-AW65 (Out-swinging)
French
(No middle stile)
Middle Stile
=Stacking
Hardware
Concealed Fastener Hinges, Deadbolt Lock, Multi-Point Locking Handle, Limit / Door Stop
3-1/4"
4307
3932
3906
3907
578
3907
4-9/16"
4
3932
3906
4-9/16"
578
2
2
11
2
4307
1
3932
4307
3
3906
4
4
3
n
5/2011 S.6 P.32
578
4-9/16"
3932
Details shown are not to scale.
For additional detail and configurations, log on to www.oldcastlebe.com
3907
3907
3906
4307
3
4-9/16"
578
n
n
AAMA Class
entrances
4307
3906
3907
3906
4-9/16"
5
3907
4307
3932
4-9/16"
578
7
5
578
3932
7
7
5
8
4307
3907
578
3906
5-15/16"
6
3907
578
3906
3932
3916
4-9/16"
3935
6
6
8
8
For additional detail and configurations, log on to
http://www.oldcastlebe.com/products/entrances/aluminum/terrace-door-swing
5/2011 S.6 P.33
entrances
Introduction
Series 62E Eurotherm® thermal barrier technology allows for dual color finish combinations.
Specifications
For specifications on Entrances Terrace Door Slide 62E products, go to
http://www.oldcastlebe.com/products/entrances/aluminum/terrace-door-swing/specifications
Door Size Guidelines
(Width x Height)
Single Door
Sidelite Door
MIN
MAX MIN
30" x 78"
48" x 96"
36" x 78"
(Leaf width not less than 28-5/8")
MAX 96" x 96"
(Leaf width not greater than 46-5/8")
Transom Door
Double and French Doors
MIN
MIN
MAX 30" x 78"
(Leaf height not less than 78")
MAX 48" x 144"
60" x 82-1/2"
96" x 96"
(Leaf height not greater than 94-5/8")
Performance
Design
Uniform Load Allowable
No Water
U-Value
CRF
Pressure
Structural Air Infiltration Leakage Class
Class
(PSF)
(PSF)
(CFM/SQ FT) @__PSF
In-swinging50 75
0.10 10 60 55
Out-swinging65 97.5
0.10 12
60
55
(FHA) Out-swinging65
97.5
0.10
12
60
55
Oldcastle BuildingEnvelope™ architectural terrace door products commonly outperform the AAMA standardized test values
shown above. Optional higher performance requirements can be accommodated to satisfy specific project conditions; please
consult your Oldcastle BuildingEnvelope™ representative if such conditions are encountered.
Features and Benefits Data
Features
Benefits
.125" minimum wall thickness
Modular compatibility with Moduline Series 16E
and 16PF
Tubular frame, sash and meeting rails
Enhanced architectural performance
Extruded screw spline joinery frame
Eurotherm® thermal framing
Hairline tight frame intersections
Corner-keyed, sealed and hydraulically staked
door leaf
Dual color and finishes, and energy efficiency
Replaceable, high quality compression seals
Stainless steel limit-friction adjuster-door stop
High quality cylinder and multi-point locks
Corrosion resistant, attractive and smooth leaf
operation
FHA compliant handicap sill option
Secure and effortless engagement
Integral transoms and sidelites
Versatility to meet assisted living requirements
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Structural performance, lifecycle stability
n
n
n
n
n
Narrow sightlines in multi-lite single unit
construction
n
n
5/2011 S.6 P.34
n
n
entrances
AAMA Class
ATD-AW50 (In-swinging) / ATD-AW65 (Out-swinging)
French
(No middle stile)
Middle Stile
=Stacking
Hardware
Concealed Fastener Hinges, Deadbolt Lock, Multi-Point Locking Handle, Limit / Door Stop
4-1/2"
3905
4307
3906
578
4-9/16"
2
1
2
2
3905
1
3905
4307
3
For additional detail and configurations, log on to
http://www.oldcastlebe.com/products/entrances/aluminum/terrace-door-swing
3
3907
4-1/4"
3907
4307
3906
4-9/16"
578
3
4307
578
3907
578
3908
4-9/16"
4
3907
3905
1
3906
4-9/16"
4
4
5/2011 S.6 P.35
entrances
AAMA Class
4-9/16"
578
4307
3918
3905
3917
3917
5
3918
4307
3905
578
7
4-9/16"
5
77
5
8
4307
3918
578
3918
3917
3905
5-15/16"
6
3917
578
3916
3915
4-9/16"
88
66
n
5/2011 S.6 P.36
n
n
Introduction
Out-swinging Terrace Door
n
Featuring nominal frame depths of 2-7/8" and 4" in Stand-Alone or Insert applications
n
Rigid PVC thermal breaks ensure superb thermal protection to suit any climate
entrances
Entrances: Terrace Door—Series 2266
n
Utilization of tubular frame and sash extrusions, reinforced, crimped and epoxy-welded corners and
center-seal gasket increases durability for long-term performance
n
Standard hardware is brushed-chrome finish, Verona style handles, 1/2" cylinder lock with
ergonomical thumbturn and 2-piece adjustable butt hinges (minimum 3 hinges per leaf)
n
On paired applications, astragal frame on inactive leaf is supplied with flush-bolt operator allowing
double door opening and locking
n
Safety and security features offered include the highest quality profile cylinder locks (with optional
keyed full locking cylinder) and stainless steel concealed door stops to limit door swing to 90°
n
Specifications
For specifications on Architectural Window Series 2266 products, go to
www.oldcastlebe.com/products/entrances/aluminum and click on “Specifications”.
Window
Door
Application
Size Guidelines
2266 door system
Imperial
Metric
Maximum Window Size
Single Leaf
42" x 96"
1060mm x 2440mm
Double Leaf (pair)
96" x 96"
2440mm x 2440mm
Minimum Window Size
Single Leaf
30" x 78"
760mm x 1980mm
Double Leaf (pair)
72" x 78"
1828mm x 1980mm
Maximum Sash Weight
275 lbs
125 lbs
Standard Glazing Depth
1"25.4mm
Maximum Glazing Depth
1"25.4mm
Minimum Glazing Depth
1"25.4mm
Performance
NAFS Rating: ATD-AW 90 (Single Leaf)
n
Air Leakage: Less than 0.10 CFM/FT2; Tested @ 6.24 PSF
n
Water Test: 15 PSF
n
Structure Load: 90 PSF
n
Proof Load: 135 PSF
n
Oldcastle BuildingEnvelope™ architectural window products commonly outperform the AAMA certification requirements shown
above. Optional higher performance requirements can be accommodated to satisfy specific project conditions; please consult
your Oldcastle BuildingEnvelope™ representative if such conditions are encountered.
5/2011 S.6 P.37
entrances
Features
Available in 2-7/8" (73mm) and 4" (102mm)
frame depths
Dummy handle set in brushed chrome finish on
inactive leaf of paired door
Full passage set with multi-point locking
Adjustable 2-piece hinges (3 per door leaf)
allowing 6-way adjustment
n
n
Center seal restricts interior air and water
leakage
n
Large frame sizes and sash weights can
be built
n
Verona style handle in brushed chrome finish
with thumbturn on interior side of active leaf
n
n
n
Concealed Limit arms to stop opening of leaf
to 90°
n
Astragal frame on inactive door leaf with flush
bolt operators allows double door operation
n
1" (25.4mm) glass units in any combination
n
n
5/2011 S.6 P.38
n
n
6
D01
1
D01
1
D01
1
D01
entrances
8
D01
7
D01
3
D01
4
D01
3
D01
2
D01
3-3/16"
[80.4]
2-7/8"
[72.5]
3-3/16"
[80.4]
15/16"
[23.5]
3
4-7/16"
[112]
Door Jamb (@ Hinge) Detail
7/16"
[11]
Door Head Detail
4-3/8"
[111.6]
2-15/16"
[74.6]
9-1/4"
[234.2]
3-3/16"
[80.4]
2-7/8"
[72.7]
2-3/16"
[55.1]
1-1/4"
[32]
2-3/16"
[55.1]
2-3/16"
[55.1]
7/8"
[22.8]
5-5/16"
[135.5]
4-3/8"
[111.6]
3-3/16"
[80.4]
2-3/16"
[55.1]
4-3/8"
[111.6]
2-7/8"
[72.7]
4-3/8"
[111.6]
Door Astragal Detail
5
15/16"
[23.9]
3-3/16"
[81.2]
6
15/16"
[23.9]
2-7/8"
[72.7]
2-15/16"
[74.6]
2
2
D01
2-7/8"
[72.7]
2-3/16"
[55.1]
3-3/16"
[80.4]
5-5/16"
[135.5]
4-3/8"
[111.6]
5
D01
2
D01
2-7/8"
[72.7]
1/4"
[6.6]
1
3
D01
2
D01
2-3/16"
[55.1]
15/16"
[23.9]
2
D01
5
D01
1-1/4"
[32]
Door Fixed Head Detail
8
2-7/8"
[72.6]
7/8"
[22.8]
Door Fixed Jamb Detail
Door Sill Detail
Door Jamb (@ Handle) Detail
3-3/16"
[80.4]
15/16"
[23.9]
2-3/16"
[55.1]
4-3/8"
[111.6]
7 3/16"
[182]
4-3/8"
[111.6]
3-3/16"
[80.4]
4"
[101.6]
1-7/8"
[47.6]
7/8"
[22.8]
4
2-7/8"
[72.7]
2a
Optional Door Sill Detail
2-15/16"
[74.6]
7
3/8"
[9.1]
Door Transom Fixed above Door
"refer to website for additional
configurations"
5/2011 S.6 P.39
2-7/8"
[72.6]
2-13/16"
[70.9]
3-3/16"
[80.4]
FRAME WIDTH
3-3/16"
[80.4]
2-13/16"
[70.9]
1/4"
[6.6]
3-3/16"
[80.4]
4-3/8"
[111.6]
5-15/16"
[151.3]
2-7/8"
[72.7]
2-13/16"
[70.9]
1-9/16"
[39.8]
entrances
4-7/16"
[112]
15/16"
[23.5]
4-3/8"
[111.6]
Door Jamb (@ Handle) Long Leg
4a
2-15/16"
[74.6]
1a
1-9/16"
[39.8]
Door Jamb (@ Hinge) Long Leg
3a
Door Head Long Leg
2-13/16"
[70.9]
7/8"
[22.8]
2-7/8"
[72.7]
2-13/16"
[70.9]
1-7/8"
[47.9]
2-7/8"
[72.6]
1-7/8"
[47.9]
6a
Door Fixed Head Long Leg
Door Fixed Jamb Long Leg
1-9/16"
[39.8]
5/8"
[15.9]
1"
[25.4]
8a
7/8"
[22.8]
2-3/16"
[55.1]
3-3/16"
[80.4]
3-3/16"
[80.4]
4-3/8"
[111.6]
4-3/8"
[111.6]
Door Jamb (@ Handle) Curtainwall Leg
5/8"
[15.9]
4b
5/8"
[15.9]
2-3/16"
[55.1]
2-7/8"
[72.6]
1-7/8"
[47.9]
Door Fixed Head Curtainwall Leg
8b
7/8"
[22.8]
Door Fixed Jamb Curtainwall Leg
"refer to website for additional
configurations"
n
5/2011 S.6 P.40
1-9/16"
[39.8]
Door Jamb (@ Hinge) Curtainwall Leg
2-13/16"
[70.9]
2-3/16"
[55.1]
1-7/8"
[47.9]
7/8"
[22.9]
4-7/16"
[112]
15/16"
[23.5]
Door Head Curtainwall Leg
2-7/8"
[72.7]
6b
5/8"
[15.9]
2-7/8"
[72.7]
5-15/16"
[151.3]
7/8"
[22.4]
3b
1b
2-3/16"
[55.1]
3-3/16"
[80.4]
2-3/16"
[55.1]
5/8"
[15.9]
n
n
Introduction
Aesthetically clean, energy efficient and structurally superior, the 4-1/2" Terra Slide is an optimal choice
that meets various construction and visual needs.
entrances
Entrances: Terra Slide—
Series 60E
Specifications
For specifications on Architectural Window Terra Slide Series 60E products, go to
www.oldcastlebe.com/products/architectural-windows/terra-slide/terra-slide-series-60e
Window
Door
Size
Size
Guidelines
Guidelines
Standard
Handicap MIN (width x height)MAX (width x height)
72" x 84"
120" x 96"
81" x 85-3/4"
98" x 108"
Performance
Design
Uniform Load
Allowable
No Water
U-Value
CRF
Pressure
Structural
Air Infiltration Leakage Class
Class
(PSF)
(PSF)
(CFM/SQ FT)
@__PSF
Projected 80 120 0.30 12 5550
Oldcastle BuildingEnvelope™ architectural window products commonly outperform the AAMA certification requirements shown
above. Optional higher performance requirements can be accommodated to satisfy specific project conditions; please consult
your Oldcastle BuildingEnvelope™ representative if such conditions are encountered.
Features and Benefits
Features
Benefits
.125" principal wall thickness
Modular compatibility with Series 16PF
and 16PL
Pre-set mounting plate frame design
Architectural performance
Bead glazed, interior slide design
Accurate positioning and quick installations
Tubular sash and meeting rails
Desirable for high-wind applications
Extruded screw spline frame miter and crimp
leaf joinery
Visual appeal and energy efficient
Replaceable, high quality weather stripping
Hairline tight intersections and enhanced
structural integrity
n
n
n
n
n
n
n
SS tandem rollers and heavy duty bumper
stops
n
Architectural grade handle and locks
n
In-house anodized and organic finishes
n
Handicapped accessibility
n
Eurotherm® thermal framing
n
n
n
n
n
n
n
n
n
Corrosion resistance, lifecycle stability and
smooth operation
n
Secure and effortless engagement with elegant
appearance
n
Versatility meet short lead time requirements
n
Dual colors and finishes available
n
5/2011 S.6 P.41
entrances
Series 60E
AAMA CLASS: SD-80
TYPICAL CONFIGURATIONS
STANDARD
HAND Two Piece, Die Cast Zinc Handle Set with Locking Lever and
HARDWARE
OPERATED Matching Exterior Pull, Dual-Point Mortise Lock, SS Adjustable
LEAF
Tandem Rollers and Track Bumper Limit Stop
4-1/2"
6064
6064
6057
1
6064
6064
6057
6058
5
6051
6050
1
1
6051
5" 5"
5"
6050
1
1
5"
6059
3
3
3
6
6052
6052
1
2
7
4
6-3/8"
5"
6051
6056
6054
6054
6055
4
4
6051
6050
2
2
6050
2
2
6050
2
6052
6051
6052
6055
6053
6053
3
4
n
5/2011 S.6 P.42
n
n
5
5
5
5
entrances
6064
Series 60E
5
6058
4-1/2"
6057
6064
6051
6051
6058
6050
6064
5
6052
6052
7
6050
6057
4-15/32"
6064
7
5
7
4-15/32"
7
6061
6
6
6062
6052
6
6051
6050
6052
6051
6060
6050
6062
6-3/16"
6
5/2011 S.6 P.43
loose hardware
& fabrication
5/2011 S.6 P.44
Table of Contents
Push/Pulls
page 46
Butt Hinges and Pivots
page 48
Locks and Accessories
page 49
Miscellaneous Hardware
page 52
Standard Exit Devices
page 53
Door Closers
page 54
Loose Hardware
Loose Hardware & Fabrication
5/2011
P.36
5/2011 S.6 P.45
Push/Pulls
Item
Description
PH-12 TB
Offset aluminum door pull.
2-1/4" projection, 1" dia., 10" C. to C. thru-bolt mounting
PH-13 TB
Straight aluminum door pull.
2-1/4" projection, 1" dia., 10" C. to C. thru-bolt mounting
PB-16 TB
Straight aluminum door push bar for 30",
36" and 42" doors. 2-1/4" projection, 1" dia. thru-bolt mounting
PH-12 BB
Offset aluminum door pulls (2).
2-1/4" projection, 1" dia., 10" C. to C. back-to-back mounting
PH-13 BB
Straight aluminum door pulls (2).
2-1/4" projection, 1" dia., 10" C. to C. back-to-back mounting
PH-12/PB-16 BB
Offset aluminum door pull with straight aluminum push bar. For 36" doors,
2-1/4" projection, 1"dia., back-to-back mounting
PH-13/PB-16 BB
Straight aluminum door pull with straight aluminum push bar. For 36" doors,
2-1/4"projection, 1" dia., back-to-back mounting
Loose Hardware
Loose Hardware & Fabrication: Premium
5/2011
P.36
5/2011 S.6 P.46
Loose Hardware
Loose Hardware & Fabrication: Standard
Push/Pulls
Item
Description
Offset aluminum door pull with straight aluminum push bar. For 36" doors.
8-1/2" C. to C. 2-1/4" projection, 1" dia., back-to-back mounting.
Must also order Mounting Kit. 12632-Clear, 12633-Champagne
PH-20/PH-21 BB
Straight Aluminum door push bars. For 36" doors.
2-1/4" projection, 1" dia., back-to-back mounting.
Must also order Mounting Kit.
12634-Clear, 12635-Champagne
PB-21 BB
5/2011
P.37
5/2011 S.6
S.6 P.47
PH-20 BB
Offset aluminum door pulls (2). 2-1/4" projection, 1" dia.,
8-1/2" C. to C. back-to-back mounting.
PH 21 TB
Offset aluminum door pull For Panic Doors Only
2-1/4" projection, 1" dia., 8-1/2" C. to C. Thru-Bolt mounting
Item
Description
BH-1
4-1/2" x 4" Butt hinge
BH1-NRP
4-1/2" x 4" Butt hinge with non-removable pin
BH-26
Door & frame back up plate for BH-1 butts
Loose Hardware
D-78
Door & frame back up plate for OP-11
OP-6
Top offset pivot-frame 1/8" backset
OP-7
Top offset pivot-door 1/8" backset
OP-10
Bottom offset pivot-frame 1/8" backset. Specify hand
OP-9
Adjustable Bottom offset pivot-door 1/8" backset
OP-5
Bottom offset pivot-frame portion for use without threshold
OP-11
Intermediate pivot. Prep charges include back up plate. Specify hand
5/2011
P.36
5/2011 S.6 P.48
Loose Hardware
Item
Description
CP1
Center pivot top
CP2
Center pivot bottom set for use with threshold
CP3
Center pivot bottom set for use without threshold
Item
Description
1750A-050
Standard M.S. hookbolt lock
5/2011
P.37
5/2011 S.6
S.6 P.49
FP-1
Face plate for 1750A-050 hookbolt. Specify #220 beveled left hand,
#320 beveled right hand or #420 radiused w/ weather strip
1850-A
1-3/8" long throw M.S. deadlock
FP-2
Face plate for 1850A deadlock. Specify #210 beveled left hand,
#310 beveled right hand or #410 radiused w/ weather strip
Item
Description
1750-A-2PT
Two point M.S. 1750 deadlock with 4015
threshold bolt and face plate. For single doors
Three point M.S. 1750 deadlock with 4015
threshold bolt and face plate and 4016-30 header bolts
Loose Hardware
1750-A-3PT
MS-4002
For pairs of doors. Armored strike for hookbolt lock.
Specify #032 flat strike plate or #132 radiused strike plate.
4710W/4560
4710 deadlatch with round or beveled face plate,
strike and one 4560 lever handleless cylinder.
Specify hand
4710
4710 deadlatch
4560
4560 Lever handle for 4710 deadlatch.
Includes lever handle, escutcheons, and cam plugs
4590*
Paddle handle w/ cam plug for use with 4710 deadlatch.
Note: 1=RH Pull, 2=LH Push, 3=LH Pull, 4=RH Push
4701Strike plate for 4710 deadlatch. Specify # 4701-01 flat strike for
single doors or 4701-02 radiused strike for pairs of doors
* Hardware is non-stock
5/2011
P.36
5/2011 S.6 P.50
Loose Hardware
Item
Description
FP-3Face plate for 4710 deadlatch. Specify #2220 beveled left hand,
#3220 beveled right hand or #4220 radiused with weather strip
7100-540-24V-AC
Inter std. fail secure Intermittent duty
electric door strike for frame
7101-540-24V-AC
Inter std. fail secure, Intermittent duty
electric door strike for inactive door
4605
Transformer converts 120 VAC to 24 VAC.
Rated 40 AMP output
4603Rectifier, Silences buzzing noises produced by electrical current
5/2011
P.37
5/2011 S.6
S.6 P.51
4089
4089 exit indicator. Specify hand
CY-1
1-5/32" Dia. cylinder for locks
Item
Description
CY-2
Cylinder guard for exterior of door only.
Specify hand; Cylinder not included
CY-3
1-5/32" Diameter thumbturn for standard locks
CY-4
1-5/32" Dummy cylinder for standard locks
CY-5
1-5/32" Rim cylinder for standard panic.
(Not available keyed alike)
FB-14
Loose Hardware
Round face flush bolt for all doors
MT-14
Metal tip for FB-14 flush bolt
BRL-1861
1861 bottom rail lock
Item
Description
V-23142" wide aluminum weatherstrip for door bottom rail with wool pile inserted;
Pre-punched for exposed screws (screws not included)
BW-871
Door holder (door type)
5/2011
P.36
5/2011 S.6 P.52
Loose Hardware
Item
Description
FNG-1 Black vinyl finger guard, up to 96"
(Special width frames are required for standard doors)
S-3-6
Door stop for converting double acting doors
to single acting doors (6' long)
Standard Exit Devices
Item
Description
RP-100 A
Standard surface mounted rim panic for active leaf;
Includes rim cylinder, strike and standard pull handle
RP-100 I
Standard surface mounted rim panic for active leaf;
Includes standard pull handle
RM-170
Removable mullion for pair of doors; Includes sill fittings,
stabilizers, strikes and soffit fittings
CP-100 A
Standard concealed rod panic for active leaf;
Includes cylinder, strike and standard pull handle
CP-100
5/2011
P.37
5/2011 S.6
S.6 P.53
Standard concealed rod panic for active leaf;
Includes standard pull handle
Surface Closers
Item
Description
SMC-100
Closer with back check
SMC-100-HO
Closer with back check and hold open
SMC-DP
Drop plate for closer
Loose Hardware
L C N Closers
Item
Description
4040
L C N Super smooth surface mounted closer;
Includes 4040-18 drop plate and regular arm for mounting on hinge side only.
For mounting on push side, use 18G or 18TJ non-handed and non-sized;
Consult factory for other options
Right hand w/hold open, Left hand w/hold open
LCN 2034 Closer,
Cover Plate, Arm
Assembly, Top Rail
Track and Roller
Right hand NHO, Left hand NHO
Custom bronze and stainless clad finishes quoted upon request.
5/2011
P.36
5/2011 S.6 P.54
Loose Hardware
Concealed Overhead Closers
Item
Description
For doors 36" wide or less
Includes top arm, bottom and clips
For doors over 36" in width
Includes top arm, bottom and clips
Closer Options
Item
5/2011
P.37
5/2011 S.6
S.6 P.55
Description
400 B
Top arm assembly for concealed
overhead closers; Side load
J-3-OA Offset arm assembly for concealed overhead closers;
Includes arm, slide & 42" cover channel;
Requires OP-11 top pivot on pivot doors and D-72 top rail on NS doors
Surface Closers
Item/Description
Part Number
4968
For butt hung door with overhead surface closer
971 P/RH
4
4973P/LH
4975/RH
4981/LH
For offset pivot door with overhead surface closer
Loose Hardware
4979P/RH
0064/RH
1
10068/LH
For offset door with Dor-O-Matic 200/250. Rixon 20/25/27 floor closer
10066/RH
4987
For center hung door with overhead surface closer
10074
70076
For center hung door with Dor-O-Matic 300. Rixon 30 floor closer
4990
For butt hung pair doors with overhead surface closers
4994P
10081 NW
4996
For offset pivot pair of doors with overhead surface closers
5000 P
10087 NW
10091
For offset pivot pair of doors with Dor-O-Matic 200/250, Rixon 20/25/27 floor closer
10095 P
10093 NW
5002
For center hung pair of doors with overhead concealed closers
10099
10101
For center hung pair of doors with Dor-O-Matic 300. Rixon 30 floor closer
5/2011 S.6 P.37
5/2011 S.6 P.56

entrances - Oldcastle BuildingEnvelope

Transcription

Similar documents

Licorice International