PRICE LIST 2011

Transcription

PRICE LIST 2011

Module collector
PRICE LIST 2011
SOLAR SYSTEMS FOR THE ROUGH REALITY
All prices in EUR, excl. VAT
1
CONTENTS
SOLAR SYSTEMS FOR THE ROUGH REALITY …
LÄ
NG
TIE
TISUN
2012
AN
GEP
VER
... This was the concept that – over 2 decades ago in the tough climate of the Tyrol – spawned a solar specialist whose services and innovations had a major impact on the rapid rise
of solar systems. The first solar systems are still in use today supplying heat and energy
under the most demanding conditions. Our philosophy for success: efficiency, toughness
and durability is the core promise of the brand.
TiSUN® is now a leading manufacturer in Central Europe – the global centre of solar
technology.
T
ITÄ
FTE QUAL
RÜ
E RT E G A
R
TiSUN® was the
first Austrian company to receive the
Austria Solar Seal
of Quality.
With TiSUN®, developed and manufactured in the Tyrolean mountains, you are choosing
quality that can withstand the tough demands of real life – for generations to come.
Solar Keymark
Module collector and installation
Module collector
Page
3
Installation components
Page
4
Solar sets - Hot water, fresh water and heating
SWS Solar hot water set
Page 12
SFS Solar fresh water set
Page 19
SHS Solar heating set
Page 21
Thermosiphon system
Thermosiphon system
Page 26
Large collector and installation
In-roof large collector
Page 28
On-roof large collector
Page 33
tested
Solar components
Control units and accessories
Page 38
Stations and accessories
Page 40
Charging stations and heat dumps
Page 44
Accessories
Page 45
Piping
Page 47
Standardstested
drinking water
Solar stratified tanks
Pro-Clean PLUS / Pro-Clean ® / Pro-Heat
Page 50
Solar tanks and accessories
Solar fresh water tanks
Page 55
Buffer tanks
Page 56
Domestic Hot Water tanks
Page 57
Tank accessories
Page 58
Installations, services and commissioning
Installations, services and commissioning
Page 61
General Terms and Conditions of Business
General Terms and Conditions of Business and Delivery
2
Page 63
For questions and suggestions,
please contact:
TiSUN GmbH | Solarpark · Stockach 100 · 6306 Söll
Tel.: +43 (0) 5333 / 201-0
Fax: +43 (0) 5333 / 201-100
E-Mail: office@tisun.com
Hompage: www.tisun.com
Module collector
NEW
MODULE COLLECTOR 2,0 / 2,5
FM 2,0 / 2,5 MODULE COLLECTOR PRODUCT OVERVIEW
A collector system that is exceptionally flexible
to install and use
Solar Keymark
The FM 2,0 / 2,5 module collector is used as a modular system for horizontal or vertical in-roof,
on-roof and free-standing installation. Light in weight and perfect in size, the collector is ideally designed for very quick installation without a mobile crane.
Product description
Design
Modular flat plate collector
Installation/mounting
Collector tilt angles from 15° to 70°
Snow load pressure
max. 300 kg/m2
Housing
Anthracite powder-coated (RAL 7016) aluminium/frame construction with aluminium rear panel
Absorber
Full-area absorber, laser-welded with high-selectivity coating (meandering flow)
Connectors
4/copper pipes, 18 × 0.8 mm
Cover
Prismatic solar safety glass, 4 mm (high degree of light transmission)
FM 2,0 / 2,5 module collector
FM-S 2,0 (vertical)
Type
NEW
FM-S 2,5 (vertical)
FM-W 2,0 (horizontal)
1430506
1430538
NEW
FM-W 2,5 (horizontal)
Item No.
1430539
Gross area
2,00 m²
2,55 m²
2,00 m²
2,55 m²
Aperture area
1,85 m²
2,36 m²
1,85 m²
2,36 m²
2,00 × 1,00 × 0,09 m
2,16 × 1,18 × 0,09 m
1,00 × 2,00 × 0,09 m
1,18 × 2,16 × 0,09 m
38 kg
47 kg
39 kg
48 kg
685,–
811,–
713,–
846,–
External dimensions (H × W × D)
Weight
Price
1430507
Connection examples
Vertical (type FM-S 2,0 / 2,5)
Horizontal (type FM-W 2,0 / 2,5)
max. 6 collectors in total
max. 6 collectors per row in total
!
Note:
Module collectors can be fed from both sides!
For further information on connectivity, see Technical Catalogue!
3
NEW
COLLECTOR INSTALLATION COMPONENTS – PARALLEL ON THE ROOF
For parallel installation on different types of roofs using customised roof fixings.
The roof installation components and the frame appropriate for the collector have to be selected separately.
Collector frame
including hydraulic connection set and installation instructions (without roof fixings)
Frame
1 x FM-S
2 x FM-S
3 x FM-S
4 x FM-S
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
Item No.
1430524
1430188
1420698
1420336
1420700
1420337
1420701
1420338
Price
173,–
190,–
236,–
259,–
317,–
334,–
391,–
414,–
Number of collectors
On-roof parallel
Minimum quantity of roof fixings required (for specified collector area loading)
Duo hanger bolts
Rafter anchor for roof tiles
Standard loading up to
1.5 kN/m² (150 kg/m²)
4
4
6
6
8
8
10
10
Increased loading up to
3.0 kN/m² (300 kg/m²)
4
4
8
8
12
12
16
16
0.75 kN/m² (75 kg/m²)
4
4
6
6
8
8
10
10
1.5 kN/m² (150 kg/m²)
4
4
8
8
12
12
16
16
Solar bracket for side lock panels
Bitumen flange plate
Corrugated cement asbestos calotte
Profiled bracket
Joint clamp for standing seam roof
Hanger bolt (plain)
Roof hook for roof tiles
Plain tile hook
Frame
1 x FM-W
2 x FM-W
3 x FM-W
4 x FM-W
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
Item No.
1430534
1430223
1420706
1420364
1420707
1420365
1420708
1420366
Price
173,–
179,–
225,–
236,–
294,–
311,–
357,–
380,–
On-roof parallel
Duo hanger bolts
1.5 kN/m² (150 kg/m²)
4
4
8
8
12
12
16
16
3.0 kN/m² (300 kg/m²)
4
4
8
8
12
12
16
16
0.75 kN/m² (75 kg/m²)
4
4
8
8
12
12
16
16
1.5 kN/m² (150 kg/m²)
4
4
8
8
12
12
16
16
Corrugated cement asbestos calotte
Profiled bracket
Joint clamp for standing seam roof
Hanger bolt (plain)
Plain tile hook
4
Module collector
5 x FM-S
6 x FM-S
in 2 rows
in 2 rows
for the first collector
8 x FM-S
10 x FM-S
FM-S basic set
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
1420702
1420339
1420703
1420340
1420704
1420384
1420705
1420385
1430524
1430188
1430525
1430189
466,–
495,–
547,–
570,–
782,–
828,–
938,–
989,–
173,–
190,–
81,–
83,–
12
12
14
14
20
20
24
24
4
4
2
2
20
20
24
24
32
32
40
40
4
4
4
4
12
12
14
14
20
20
24
24
4
4
2
2
20
20
24
24
32
32
40
40
4
4
4
4
5 x FM-W
6 x FM-W
2,0
2,5
for each additional collector
FM-S expansion set
in 2 rows
in 2 rows
8 x FM-W
10 x FM-W
FM-W basic set
2,0
2,5
FM-W expansion set
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
1420709
1420367
1420710
1420368
1420711
1420314
1420712
1420315
1430534
1430223
1430535
1430224
426,–
449,–
489,–
524,–
719,–
765,–
851,–
903,–
173,–
179,–
69,–
75,–
20
20
24
24
32
32
40
40
4
4
4
4
20
20
24
24
32
32
40
40
4
4
4
4
20
20
24
24
32
32
40
40
4
4
4
4
20
20
24
24
32
32
40
40
4
4
4
4
5
NEW
COLLECTOR INSTALLATION COMPONENTS – FOR ON-ROOF RAISED AND FREE-STANDING INSTALLATION
For standing installation on different types of roofs using customised roof fixings and free-standing installation using extraction-proof anchor bolts. The
corresponding fixings and the frame appropriate for the collector have to be selected separately.
Collector frame
including hydraulic connection set and installation instructions (without fixings for roof-standing and
free-standing installation)
Frame
1 x FM-S
2 x FM-S
3 x FM-S
4 x FM-S
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
Item No.
1430520
1430169
1420713
1420318
1420714
1420319
1420715
1420320
Price
322,–
333,–
455,–
472,–
610,–
627,–
765,–
782,–
Item No.
1430522
1430177
1420720
1420323
1420721
1420324
1420722
1420325
Price
403,–
420,–
570,–
610,–
765,–
817,–
955,–
1.030,–
Item No.
1430526
1430198
1420727
1420341
1420728
1420342
1420729
1420343
Price
455,–
501,–
639,–
685,–
846,–
897,–
No. of collectors
max. 50°
On-roof, 20° max. roof pitch
of 50°
max. 30°
of 30°
max. 10°
of 10°
1.053,– 1.110,–
Duo hanger bolts
1.5 kN/m² (150 kg/m²)
4
4
6
6
8
8
10
10
3.0 kN/m² (300 kg/m²)
4
4
8
8
12
12
16
16
0.75 kN/m² (75 kg/m²)
4
4
6
6
8
8
10
10
1.5 kN/m² (150 kg/m²)
4
4
8
8
12
12
16
16
Snow load up to
3.0 kN/m² (300 kg/m²)
Wind impact pressure up
to 0.75 kN/m² (75 kg/m²)
6
6
10
10
14
14
18
18
2
2
2
2
2
2
3
3
Corrugated cement asbestos
calotte
Profiled bracket
Anchor bolt
Hanger bolt (plain)
Joint clamp for standing seam
roof
Guy cable set
Frame
1 x FM-W
2 x FM-W
3 x FM-W
4 x FM-W
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
Item No.
1430530
1430204
1420734
1420346
1420735
1420347
1420736
1420348
Price
253,–
259,–
386,–
397,–
535,–
547,–
679,–
702,–
Item No.
1430532
1430212
1420741
1420351
1420742
1420352
1420743
1420353
Price
276,–
294,–
414,–
437,–
564,–
593,–
719,–
754,–
Item No.
1430536
1430233
1420748
1420369
1420749
1420370
1420750
1420371
Price
322,–
328,–
460,–
472,–
621,–
639,–
777,–
800,–
No. of collectors
max. 50°
of 50°
max. 30°
of 30°
max. 10°
of 10°
Duo hanger bolts
1.5 kN/m² (150 kg/m²)
4
4
8
8
12
12
16
16
3.0 kN/m² (300 kg/m²)
4
4
8
8
12
12
16
16
0.75 kN/m² (75 kg/m²)
4
4
8
8
12
12
16
16
1.5 kN/m² (150 kg/m²)
4
4
8
8
12
12
16
16
Snow load up to
3.0 kN/m² (300 kg/m²)
to 0.75 kN/m² (75 kg/m²)
6
6
10
10
14
14
18
18
2
2
2
2
2
2
3
3
calotte
Profiled bracket
Anchor bolt
Hanger bolt (plain)
roof
Guy cable set
6
Module collector
5 x FM-S
6 x FM-S
in 2 rows
in 2 rows
8 x FM-S
10 x FM-S
FM-S basic set
FM-S expansion set
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
1420716
1420321
1420717
1420322
1420718
1420374
1420719
1420375
1430520
1430169
1430521
1430170
915,–
943,–
1.570,–
1.835,–
1.886,–
322,–
333,–
161,–
166,–
1420723
1420326
1420376
1420726
1420377
1430522
1430177
1430523
1430178
2.059,–
2.295,–
2.484,–
403,–
420,–
202,–
222,–
1420386
1420733
1420387
1430526
1430198
1430527
1430199
2.226,–
2.519,–
2.651,–
455,–
501,–
219,–
225,–
1.070,– 1.099,– 1.530,–
1420724
1420327
1420725
1.145,– 1.242,– 1.334,– 1.449,– 1.909,–
1420730
1420344
1420731
1420345
1420732
1.260,– 1.323,– 1.467,– 1.536,– 2.105,–
12
12
14
14
20
20
24
24
4
4
2
2
20
20
24
24
32
32
40
40
4
4
4
4
12
12
14
14
20
20
24
24
4
4
2
2
20
20
24
24
32
32
40
40
4
4
4
4
22
22
26
26
36
36
44
44
6
6
4
4
4
4
4
4
3+3
3+3
4+4
4+4
2
2
1
1
5 x FM-W
6 x FM-W
in 2 rows
in 2 rows
8 x FM-W
10 x FM-W
FM-W basic set
FM-W expansion set
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
2,0
2,5
1420737
1420349
1420738
1420350
1420739
1420305
1420740
1420306
1430530
1430204
1430531
1430205
828,–
857,–
978,–
1.007,–
1.363,–
1.409,–
1.656,–
1.714,–
253,–
259,–
156,–
161,–
1420744
1420354
1420745
1420355
1420746
1420307
1420747
1420308
1430532
1430212
1430533
1430213
874,–
909,–
1.507,–
1.748,–
1.823,–
276,–
294,–
161,–
167,–
1420751
1420372
1420753
1420316
1420754
1420317
1430536
1430233
1430537
1430234
938,–
966,–
1.559,–
1.605,–
1.875,–
1.932,–
322,–
328,–
167,–
173,–
20
20
24
24
32
32
40
40
4
4
4
4
20
20
24
24
32
32
40
40
4
4
4
4
20
20
24
24
32
32
40
40
4
4
4
4
20
20
24
24
32
32
40
40
4
4
4
4
22
22
26
26
36
36
44
44
6
6
4
4
4
4
4
4
3+3
3+3
4+4
4+4
2
2
1
1
1.024,– 1.070,– 1.438,–
1420752
1420373
1.093,– 1.127,–
7
FM 2,0 / 2,5 FIXING COMPONENTS
Fixing type
Height
Item No.
Price
Fixing type
Item No.
Price
Hanger bolt
Universal mounting fixture
1430033
19,–
Solar bracket for
side lock panels
1430032
68,–
Duo hanger bolt
1430043
41,–
Bitumen flange plate for
bitumen roof, height
50 mm
1420644
45,–
Rafter anchor for
roof tiles, height 40 mm
1430029
34,–
240 mm
1420643
68,–
Rafter anchor for
1430416
35,–
Profiled console for profiled or corrugated sheet
metal 1)
1430039
55,–
1430044
30,–
Corrugated cement asbestos calotte for corrugation
5 (5 corrugations/m) ²)
1420074
29,–
Plain tile hook
for plain tile roof
1420072
39,–
8 (8 corrugations/m) 3)
1420075
29,–
Joint clamp
for standing seam roof
1430041
28,–
Anchor bolt for concrete
without height adjustment
1410001
1,67
Universal securing cable
sets for standing seam
roofs
1420688
222,–
with height adjustment
1430042
9,57
Joint clamp for securing
cable set and snow guard
system 1“
1430508
21,–
1)
Complete the data sheet when ordering (required for internal processing). Note: not held in stock, minimum order quantity 50 pcs.
Complete the data sheet when ordering (required for internal processing). Note: check standing installation of FM-W at right angles to the gable separately!
3)
Complete the data sheet when ordering (required for internal processing). Note: not held in stock, check standing installation of FM-W at right angles to the gable separately!
2)
8
Module collector
COLLECTOR INSTALLATION
Base set for FM 2.0/2.5 module collector WITHOUT fixing components (on site)
Base set: all the necessary connecting parts, sensor pocket and basic mounting screws for the FM module collector, although without the mounting components for the frame (including installation instructions).
FM-S 2,0 / 2,5
vertical
adjacent
Suitable for collector types
1430165
1430166
1430200
1430201
Basic set
Basic expansion set
Basic set
Basic expansion set
BGS-S
BES-S
BGS-W
BES-W
140,–
34,–
152,–
35,–
Item No.
Item
FM-W 2,0 / 2,5
horizontal
adjacent
Installation
Type
Price
Bracing set
For additional attachment of the FM 2,0 / 2,5 module collector when installing at right
angles to the gable, roof pitch 10°–30°.
Type
Item No.
Use
Price
VSQ-SG
1430167
for FM-S 2,0 / 2,5 vertical basic set, for the first collector
23,–
VSQ-SE
1430168
for FM-S 2,0 / 2,5 vertical expansion set, for each additional collector
21,–
VSQ-WG
1430202
for FM-W 2,0 / 2,5 horizontal basic set, for the first collector
34,–
VSQ-WE
1430203
for FM-W 2,0 / 2,5 horizontal expansion set, for each additional collector
28,–
Aluminium sections for installation
For the installation of various custom-made designs.
Type
UG 06
Item No.
1020150
Quantity
Aluminium section, length 6.15 m
Price/m
11,–
9
NEW
COLLECTOR INSTALLATION – IN-ROOF
Tiled roof
Plain tile
Slate
Spanish tile
NEW! W
t p la te !
id e r fro n
Flashing for FM-S 2.0, FM-W 2.0 module collector
Rainproof, anthracite-coloured aluminium flashing for tiled roof, plain tile, slate and Spanish tile. For a
roof pitch of 15°- 70°, including wooden and foam wedges (pluggable components and easily expandable). The sets include all the flashing components and all necessary connections
(including installation instructions).
Flashing
15° – 70°
Item No.
Price
1 × FM-S 2,0
1420786
535,–
1 × FM-W 2,0
1420789
759,–
2 × FM-S 2,0
1420787
857,–
2 × FM-W 2,0
1420790
1.168,–
3 × FM-S 2,0
1420770
1.173,–
3 × FM-W 2,0
1420778
1.633,–
4 × FM-S 2,0
1420771
1.530,–
4 × FM-W 2,0
1420779
2.157,–
5 × FM-S 2,0
1420772
1.892,–
5 × FM-W 2,0
1420780
2.680,–
6 × FM-S 2,0
1420773
2.254,–
6 × FM-W 2,0
1420781
3.203,–
Individual orders for flashing for FM-S 2.0, FM-W 2.0 module collector
The sets include all the flashing components and all necessary connecting parts (including installation instructions).
Flashing
FM-S 2,0 basic set
for the first 2 collectors
FM-W 2,0 basic set
FM-S 2,0 expansion set
FM-W 2,0 expansion
set
Item No.
Price
1420787
857,–
1420790
1.168,–
1420788
380,–
1420791
552,–
1420786
535,–
1420789
759,–
FM-S 2,0 single set
for a single collector
FM-W 2,0 single set
10
Module collector
NEW! W
t p la te !
id e r fro n
Flashing for FM-S 2.5, FM-W 2.5 module collector
Rainproof, anthracite-coloured aluminium flashing for tiled roof, plain tile, slate
and Spanish tile. For a roof pitch of 15° -23°, including wooden and foam wedges,
or 23° -70°, including foam wedges (pluggable components and easily expandable). The sets include all the flashing components and all necessary connections
(including installation instructions).
Flashing
23°– 70°
15° – 23°
Item No.
Price
Item No.
Price
1 x FM-S 2,5
1420800
547,–
1410352
443,–
1 x FM-W 2,5
1420815
765,–
1410355
443,–
2 x FM-S 2,5
1420798
869,–
1410350
650,–
2 x FM-W 2,5
1420813
1.185,–
1410353
834,–
3 x FM-S 2,5
1420801
1.191,–
1420807
851,–
3 x FM-W 2,5
1420816
1.651,–
1420822
1.070,–
4 x FM-S 2,5
1420802
1.553,–
1420808
1.087,–
4 x FM-W 2,5
1420817
2.185,–
1420823
1.346,–
5 x FM-S 2,5
1420803
1.921,–
1420809
1.317,–
5 x FM-W 2,5
1420818
2.714,–
1420824
1.628,–
6 x FM-S 2,5
1420804
2.289,–
1420810
1.553,–
6 x FM-W 2,5
1420819
3.243,–
1420825
1.904,–
Individual orders for flashing for FM-S 2.5, FM-W 2.5 module collector
The sets include all the flashing components and all necessary connecting parts (including installation instructions).
Flashing
FM-S 2,5 basic set
FM-W 2,5 basic set
FM-S 2,5 expansion
set
Item No.
Price
Item No.
Price
1420798
869,–
1410350
650,–
1420813
1.185,–
1410353
834,–
1420799
386,–
1410351
248,–
1420814
558,–
1410354
294,–
1420800
547,–
1410352
443,–
1420815
765,–
1410355
443,–
FM-W 2,5 expansion
set
FM-S 2,5 single set
FM-W 2,5 single set
11
NEW
SWS SOLAR HOT WATER SET
MODULE COLLECTORS 2,0 UND AND BE-SSPK-HE HOT WATER TANK
System schematic
Connectivity
Vertical (type FM-S 2,0)
1 Collector
Horizontal (type FM-W 2,0)
Hot water
3 Thermostatic mixing
valve
max. 6 adjacent collectors
4 Solarstation
Cold water mains
2
Hot water tank with electric
immersion element
!
Note:
Components
1
+
+
+
Module collector FM-S 2,0 (vertical) or FM-W 2,0 (horizontal) without collector installation components
πSimple installation of collectors with different installation sets for in-roof, on-roof, parallel and
free-standing installation
πHighly efficient with test certificates
πVery robust and resilient construction
Description see page 3
2
Solar tank BE-SSPK-HE
πTank with direct enamel with one solar coil in the lowest, cold zone and a large surface area for
rapid water heating
πSolar tank with minimum heat losses and rapid installation
πPowder-coated metal outer shell, wall-mounted version
πincluding electric secondary immersion element
3
Thermostatic mixing valve BMV Description see page 45
4
Solar station SFRE 25 for wall mounting
with single-loop control unit, solar expansion vessel and suitable connection set.
πSingle channel solar station and control unit for wall mounting
πAttractive, compact TiSUN® EPP heat insulation jacket with safety group insulation
πSingle-loop control unit with temperature difference control and additional
thermostat control
πHighly reliable operation and long service life
+
!
12
Antifreeze concentrate Description see page 46
Collector installation and piping components not included! Accessories for collector installation and piping, see page 4.
Gravity brake for flow pipe Accessories for preventing circulations in risers, see page 40.
Solar sets
Configuration of solar hot water sets with module collectors
SWS 2S/
BEK 125
SWS 2W/
BEK 125
SWS 2S/
BEK 160
SWS 2W/
BEK 160
SWS 2S/
BEK 200
SWS 2W/
BEK 200
SWS 4S/
BEK 200
SWS 4W/
BEK 200
Item No.
1320452
1320453
1320454
1320455
1320456
1320457
1320458
1320459
Recommended size
(Household members)
2 persons
2 persons
2 persons
2 persons
3 persons
3 persons
3 persons
3 Personen
1 × FM-S 2,0
2,00 m²
1 × FM-W 2,0
2,00 m²
1 × FM-S 2,0
2,00 m²
1 × FM-W 2,0
2,00 m²
1 × FM-S 2,0
2,00 m²
1 × FM-W 2,0
2,00 m²
2 × FM-S 2,0
4,00 m²
2 × FM-W 2,0
4,00 m²
BE-SSPK 125-HE
BE-SSPK 125-HE
BE-SSPK 160-HE
BE-SSPK 160-HE
BE-SSPK 200-HE
BE-SSPK 200-HE
BE-SSPK 200-HE
BE-SSPK 200-HE
Solar station
SFRE 25
SFRE 25
SFRE 25
SFRE 25
SFRE 25
SFRE 25
SFRE 25
SFRE 25
Expansion vessel
SAG 18R
SAG 18R
SAG 18R
SAG 18R
SAG 18R
SAG 18R
SAG 18R
SAG 18R
Antifreeze concentrate/litres
11
11
11
11
11
11
11
11
BMV Thermostatic mixing
valve
X
X
X
X
X
X
X
X
2.174,–
2.203,–
2.289,–
2.318,–
2.289,–
2.318,–
2.933,–
2.962,–
Set
Collectors
Tank incl. insulation
Accessories
Price
Extra accessories at additional cost
Spiral piping set
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
Cylinder safety group
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
The BSC cylinder safety centre protects unvented domestic hot water cylinders to max. 560 l volume, in compliance with
DIN 1988, DIN 4753, part 5, and DIN 4807. Incl. permanent-streamed, DHW-compatible membrane expansion vessel. DVGW
(German Technical and Scientific Association for Gas and Water) tested.
Type
BSG-3/4“
Item No.
1610487
Dimension
Connection
Safety valve
DN 20
G 3/4“
6 bar
Price
191,–
Spiral piping set
Type
SVS 15/18
!
Item No.
1510339
Dimension
Double pipe 15 m pipe length DN 15
Price
736,–
NB! Prices do not include collector installation and piping components (additional cost, see page 4)
13
Hot water + heating
NEW
MODULE COLLECTORS 2,0 / 2,5 AND BE-SSP-2R HOT WATER TANK
System schematic
Connectivity
Vertical (type FM-S 2,0 / 2,5)
1 Collector
Horizontal (type FM-W 2,0 / 2,5)
Hot water
3 Thermostatic mixing
valve
Oil
Gas
4 Solar
Biomass
station
Cold watermains
2
Hot water tank
!
Note:
Module collectors can be fed from
both sides! For further information on
connectivity, see Technical Catalogue!
Components
1
+
+
+
Module collector FM-S 2,0 / 2,5 (vertical) or
FM-W 2,0 / 2,5 (horizontal) without collector installation components.
πSimple installation of collectors with different installation sets for in-roof, on-roof, parallel and free-standing
installation
2
Solar tank BE-SSP-2R including insulation.
πDirect-enamelled, with one coil at the top and one solar coil in the lowest, cold zone, and a large
surface area for rapid water heating
πSolar tank with minimum heat losses and rapid installation
(up to 500 litres fixed hard foam, over 500 litres polyester fibre fleece insulation)
3
4a
or
SFRE 25 solar station for wall and tank mounting
πSingle-line solar station and control unit for wall and tank mounting
πAttractive, compact TiSUN® EPP heat insulation jacket with safety
group insulation
thermostat control
4b
with hea
t quantity
metering
SSR 25 solar station for wall and tank mounting
with dual-loop control unit, solar expansion vessel and suitable connection set.
πDual-line solar station and control unit for wall and tank mounting
πAttractive, compact TiSUN® EPP heat insulation jacket with safety group insulation
πDual-loop control unit with integrated energy balancing (heat quantity metering)
+
!
14
Collector installation and piping components not included! Accessories for collector installation and piping, see page 4.
NEW
MODULE COLLECTORS 2,0 / 2,5 AND BE-SSP-2R HOT WATER TANK PART 1
System schematic
Collector
Hot water
3
Solar sets
4
Thermostatic mixing
Oil
Gas
Biomass
Solar
station
Cold water mains
2
Hot water tank
Set
SWS 2,5S/BE SWS 2,5S/BE SWS 2,5W/BE SWS 2,5W/BE
SWS 4S/
200/SFRE
200/SSR
200/SFRE
200/SSR
BE 300/SFRE
SWS 5S/
BE 300/SFRE
SWS 5S/
BE 300/SSR
Item No.
1320476
1320498
1320477
1320499
1320460
1320478
1320500
Recommended size
(Household members)
3 persons
3 persons
3 persons
3 persons
4 persons
4 persons
4 persons
1 × FM-S 2,5
2,55 m²
1 × FM-S 2,5
2,55 m²
1 × FM-W 2,5
2,55 m²
1 × FM-W 2,5
2,55 m²
2 × FM-S 2,0
4,00 m²
2 × FM-S 2,5
5,1 m²
2 × FM-S 2,5
5,1 m²
BE-SSP-2R 200
BE-SSP-2R 200
BE-SSP-2R 200
BE-SSP-2R 200
BE-SSP-2R 300
BE-SSP-2R 300
BE-SSP-2R 300
Solar station
SFRE 25
SSR 25
SFRE 25
SSR 25
SFRE 25
SFRE 25
SSR 25
Expansion vessel
SAG 18R
SAG 18R
SAG 18R
SAG 18R
SAG 25R
SAG 25R
SAG 25R
–
X
–
X
–
–
X
Antifreeze concentrate/
litres
11
11
11
11
11
11
11
valve
X
X
X
X
X
X
X
2.772,–
3.117,–
2.806,–
3.151,–
3.611,–
3.847,–
4.192,–
Collectors
Heat quantity metering
Accessories
Price
Spiral piping set
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
SWS 4W/
BE 300/SFRE
SWS 5W/
BE 300/SFRE
SWS 5W/
BE 300/SSR
SWS 4S/
BE 400/SFRE
SWS 5S/BE
400/SFRE
SWS 5S/
BE 400/SSR
SWS 4W/
BE 400/SFRE
1320461
1320479
1320501
1320462
1320480
1320502
1320463
4 persons
4 persons
4 persons
4 persons
4 persons
4 persons
4 persons
2 × FM-W 2,0
4,00 m²
2 × FM-W 2,5
5,1 m²
2 × FM-W 2,5
5,1 m²
2 × FM-S 2,0
4,00 m²
2 × FM-S 2,5
5,1 m²
2 × FM-S 2,5
5,1 m²
2 × FM - W 2,0
4,00 m²
BE-SSP-2R 300
BE-SSP-2R 300
BE-SSP-2R 300
BE-SSP-2R 400
BE-SSP-2R 400
BE-SSP-2R 400
BE-SSP-2R 400
Solar station
SFRE 25
SFRE 25
SSR 25
SFRE 25
SFRE 25
SSR 25
SFRE 25
Expansion vessel
SAG 25R
SAG 25R
SAG 25R
SAG 25R
SAG 25R
SAG 25R
SAG 25R
–
–
X
–
–
X
–
Antifreeze concentrate/
litres
11
11
11
11
11
11
11
Thermostatic mixing valve
BMV
X
X
X
X
X
X
X
3.663,–
3.910,–
4.255,–
3.974,–
4.209,–
4.554,–
4.025,–
Set
Item No.
Recommended size
(Household members)
Collectors
Accessories
Price
Spiral piping set
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
!
15
Hot water + heating
1
NEW
System schematic
1
Collector
Hot water
3
4
Thermostatic mixing
Oil
Gas
Biomass
Solar
station
Cold water mains
2
Hot water tank
SWS 5W/BE
400/SFRE
SWS 5W/BE
400/SSR
Item No.
1320481
1320503
1320482
1320504
1320483
1320505
1320464
Recommended size
(Household members)
4 persons
4 persons
5 persons
5 persons
5 persons
5 persons
5 persons
2 × FM-W 2,5
5,1 m²
2 x FM-W 2,5
5,1 m²
3 x FM-S 2,5
7,65 m²
3 x FM-S 2,5
7,65 m²
3 x FM-W 2,5
7,65 m²
3 x FM-W 2,5
7,65 m²
3 x FM-S 2,0
6,00 m²
BE-SSP-2R 400
BE-SSP-2R 400
BE-SSP-2R 400
BE-SSP-2R 400
BE-SSP-2R 400
BE-SSP-2R 400
BE-SSP-2R 500
SSR 25
SFRE 25
SSR 25
SFRE 25
SSR 25
SFRE 25
SAG 25R
SAG 25R
SAG 25R
SAG 25R
SAG 25R
SAG 25R
SAG 25R
–
X
–
X
–
X
–
Antifreeze concentrate /
litres
11
11
16
16
16
16
16
valve
X
X
X
X
X
X
X
4.273,–
4.618,–
5.009,–
5.354,–
5.101,–
5.446,–
4.836,–
Set
Collectors
SFRE 25
Solar station
Expansion vessel
SWS 7,5S/BE SWS 7,5S/BE SWS 7,5W/BE SWS 7,5W/BE
SWS 6S/
400/SFRE
400/SSR
400/SFRE
400/SSR
BE 500/SFRE
Accessories
Price
Spiral piping set
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
SWS 8W/
BE 750/SFRE
SWS 10S/
BE 750/SFRE
SWS 10S/
BE 750/SSR
SWS 10S/BE
500/SSR
Set
SWS 10W/BE SWS 10W/BE
SWS 8S/
500/SFRE
500/SSR
BE 750/SFRE
Item No.
1320508
1320487
1320509
1320468
1320469
1320488
1320510
Recommended size
(Household members)
7 persons
7 persons
7 persons
7 persons
7 persons
8 persons
8 persons
4 x FM-S 2,5
10,2 m²
4 × FM-W 2,5
10,2 m²
4 × FM-W 2,5
10,2 m²
4 × FM-S 2,0
8,00 m²
4 × FM-W 2,0
8,00 m²
4 × FM-S 2,5
10,2 m²
4 × FM-S 2,5
10,2 m²
BE-SSP-2R 500
BE-SSP-2R 500
BE-SSP-2R 500
BE-SSP-2R 750
BE-SSP-2R 750
BE-SSP-2R750
BE-SSP-2R750
SSR 25
SFRE 25
SSR 25
SFRE 25
SFRE 25
SFRE 25
SSR 25
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
X
–
X
–
–
–
X
litres
16
11
16
16
16
16
16
valve
X
X
X
X
X
X
X
6.314,–
6.095,–
6.440,–
6.613,–
6.722,–
7.027,–
7.372,–
Collectors
Solar station
Expansion vessel
Accessories
Price
Spiral piping set
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
16
!
SWS 6W/
BE 500/SFRE
SWS 7,5W/BE SWS 7,5W/BE
500/SFRE
500/SRR
SWS 8S/
BE 500/SFRE
SWS 8W/
BE 500/SFRE
SWS 10S/
BE 500/SFRE
1320484
1320506
1320465
1320485
1320507
1320466
1320467
1320486
5 persons
5 persons
5 persons
5 persons
5 persons
5 persons
5 persons
7 persons
3 x FM-S 2,5
7,65 m²
3 x FM-S 2,5
7,65 m²
3 x FM-W 2,0
6,00 m²
3 x FM-W 2,5
7,65 m²
3 x FM-W 2,5
7,65 m²
4 x FM-S 2,0
8,00 m²
4 x FM-W 2,0
8,00 m²
4 x FM-S 2,5
10,2 m²
BE-SSP-2R 500
BE-SSP-2R 500
BE-SSP-2R 500
BE-SSP-2R 500
BE-SSP-2R 500
BE-SSP-2R 500
BE-SSP-2R 500
BE-SSP-2R 500
SFRE 25
SSR 25
SFRE 25
SFRE 25
SSR 25
SFRE 25
SFRE 25
SFRE 25
SAG 25R
SAG 25R
SAG 25R
SAG 25R
SAG 25R
SAG 33R
SAG 33R
SAG 33R
–
X
–
–
X
–
–
–
16
16
16
16
16
16
16
16
X
X
X
X
X
X
X
X
5.187,–
5.532,–
4.836,–
5.285,–
5.595,-
5.497,–
5.601,–
5.969,–
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
SWS 10S/BE
1000/SSR
SWS 10W/BE
1000/SFRE
SWS 10W/BE SWS 10W/BE
SWS 10S/
750/SFRE
750/SSR
BE 1000/SFRE
SWS 10W/BE SWS 12,5S/BE SWS 12,5S/BE
1000/SSR
750/SFRE
750/SSR
1320489
1320511
1320490
1320516
1320491
1320517
1320492
1320518
8 persons
8 persons
10 persons
10 persons
10 persons
10 persons
10 persons
10 persons
4 × FM-W 2,5
10,2 m²
4 × FM-W 2,5
10,2 m²
4 × FM-S 2,5
10,2 m²
4 × FM-S 2,5
10,2 m²
4 × FM-W 2,5
10,2 m²
4 × FM-W 2,5
10,2 m²
5 × FM-S 2,5
12,75 m²
5 × FM-S 2,5
12,75 m²
BE-SSP-2R 750
BE-SSP-2R 750
BE-SSP-2R 1000
BE-SSP-2R 1000
BE-SSP-2R 1000
BE-SSP-2R 1000
BE-SSP-2R 750
BE-SSP-2R 750
SFRE 25
SSR 25
SFRE 25
SSR 25
SFRE 25
SSR 25
SFRE 25
SSR 25
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
–
X
–
X
–
X
–
X
16
16
18
18
18
18
22
22
X
X
X
X
X
X
X
X
7.159,–
7.504,–
7.596,–
7.941,–
7.723,–
8.068,–
8.395,–
8.177,–
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 20/18
SVS 20/18
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
17
Hot water + heating
Solar sets
SWS 7,5S/BE SWS 7,5S/BE
500/SFRE
500/SSR
SWS 12,5W/BE
750/SFRE
Set
SWS 12,5W/ SWS 12,5S/BE SWS 12,5S/BE SWS 12,5W/ SWS 12,5W/
BE 750/SSR
1000/SFRE
1000/SSR
BE 1000/SFRE BE 1000/SSR
SWS 15S/BE
1000/SFRE
1320493
1320519
1320494
1320520
1320495
1320521
1320496
10 Personen
10 Personen
14 Personen
14 Personen
14 Personen
14 Personen
14 Personen
5 × FM-W 2,5
12,75 m²
5 × FM-W 2,5
12,75 m²
5 × FM-S 2,5
12,75 m²
5 × FM-S 2,5
12,75 m²
5 × FM-W 2,5
12,75 m²
5 × FM-W 2,5
12,75 m²
6 × FM-S 2,5
15,3 m²
BE-SSP-2R 750
BE-SSP-2R 750
BE-SSP-2R 1000
BE-SSP-2R 1000
BE-SSP-2R 1000
BE-SSP-2R 1000
BE-SSP-2R 1000
SSR 25
SFRE 25
SSR 25
SFRE 25
SSR 25
SFRE 25
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 50R
–
X
–
X
–
X
–
litres
22
22
22
22
22
22
22
valve
X
X
X
X
X
X
X
7.993,–
8.338,–
8.395,–
8.740,–
8.556,–
8.901,–
9.304,–
Item No.
Recommended size
(Household members)
Collectors
SFRE 25
Solar station
Expansion vessel
Accessories
Price
Spiral piping set
SVS 20/18
SVS 20/18
SVS 20/18
SVS 20/18
SVS 20/18
SVS 20/18
SVS 20/18
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
BSG-3/4“
SWS 15S/BE SWS 15W/BE SWS 15W/BE
1000/SSR
1000/SFRE
1000/SSR
Set
1320522
1320497
1320523
14 Personen
14 Personen
14 Personen
6 × FM-S 2,5
15,3 m²
6 × FM-W 2,5
15,3 m²
6 × FM-W 2,5
15,3 m²
BE-SSP-2R 1000
BE-SSP-2R 1000
BE-SSP-2R 1000
SSR 25
SFRE 25
SSR 25
SAG 50R
SAG 50R
SAG 50R
X
–
X
litres
22
22
22
valve
X
X
X
9.649,–
9.494,–
9.839,–
Item No.
Recommended size
(Household members)
Collectors
Solar station
Expansion vessel
The BSC cylinder safety centre protects unvented domestic
hot water cylinders to max. 560 l volume, in compliance with
DIN 1988, DIN 4753, part 5, and DIN 4807. Incl. permanentstreamed, drinking-water-compatible membrane expansion
vessel. DVGW (German Technical and Scientific Association for
Gas and Water) tested.
Type
BSG3/4“
Item No.
Dimension
Connection
Safety valve
DN 20
G 3/4“
6 bar
1610487
Price
191,–
Accessories
Price
Spiral piping set
Type
Item No.
Spiral piping set
SVS 20/18
SVS 20/18
SVS 20/18
SVS 15/18
1510339
BSG-3/4“
BSG-3/4“
BSG-3/4“
SVS 20/18
1510340
18
!
Price
Dimension
736,–
1.167,–
NEW
SFS SOLAR FRESH WATER SET
MODULE COLLECTORS 2,0 AND FRESH WATER TANK FS/1R
Solar sets
Connectivity
1
Collector
Hot
Domestic water
hot water
mixing 3
valve
Solar 4
station
Cold water mains
2
Solar fresh water tank
Domestic hot water systems with decentralised, germ-free water heating.
Partial solar space heating for countries with solar radiation above
1000 W/m2
!
Note:
Module collectors can be fed from both sides! For further
information on connectivity, see Technical Catalogue!
Components with FS/1R solar fresh water tank
1
+
+
+
+
!
Module collector FM-S 2,0 (vertical) or FM-W 2,0 (horizontal) without collector installation components.
πSimple installation of collectors with different installation sets for in-roof, on-roof, parallel and freestanding installation
2
Solar fresh water tank FS/1R, including insulation
πCompact multi-functional solar tank system for domestic hot water and heating with one solar coil
πSolar exchanger in the lowest, cold zone with a very large surface area
πHygienic domestic hot water heating thanks to special corrugated stainless-steel pipe used in a
continuous process
3
4
SFRE 25 solar station for wall and tank mounting
πSingle-line solar station and control unit for wall and tank mounting
πAttractive, compact TiSUN® EPP heat insulation jacket with safety
group insulation
thermostat control
Collector installation and piping components not included! Accessories for collector installation and piping can be found on page 4.
19
Hot water + heating
Fresh water tank system
NEW
SFS SOLAR FRESH WATER SET
MODULE COLLECTORS 2,0 AND FRESH WATER TANK FS/1R
Configuration of solar heating sets with module collectors (with FS fresh water tank)
SFS 4S/
FS 375
SFS 4W/
FS 375
SFS 6S/
FS 500
SFS 6W/
FS 500
SFS 8S/
FS 800
SFS 8W/
FS 800
Item No.
1320470
1320471
1320472
1320473
1320474
1320475
Recommended size (Household
members)
4 persons
4 persons
5 persons
5 persons
6 persons
6 persons
2 × FM-S 2,0
4,00 m²
2 × FM-W 2,0
4,00 m²
3 × FM-S 2,0
6,00 m²
3 × FM-W 2,0
6,00 m²
4 × FM-S 2,0
8,00 m²
4 × FM-W 2,0
8,00 m²
FS 375/1R
FS 375/1R
FS 500/1R
FS 500/1R
FS 800/1R
FS 800/1R
Solar station
SFRE 25
SFRE 25
SFRE 25
SFRE 25
SFRE 25
SFRE 25
Expansion vessel
SAG 25R
SAG 25R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
11
11
16
16
16
16
BMV Thermostatic mixing valve
X
X
X
X
X
X
4.629,–
4.681,–
5.440,–
5.549,–
6.492,–
6.601,–
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
SVS 15/18
BSC-12l
BSC-12l
BSC-12l
BSC-12l
BSC-12l
BSC-12l
Set
Collectors
Accessories
Price
Spiral piping set
Cylinder safety centre
The BSC boiler safety centre safeguards unvented domestic hot water cylinders up to 560 L in volume, in compliance with
DIN 1988, DIN 4753, part 5, and DIN 4807. Includes permanent-streamed, drinking water compatible membrane expansion
tank. DVGW certified. Also suitable for tanks with corrugated stainless-steel pipe.
Type
BSC - 12l
Item No.
1610488
Dimension
Connection
Safety valve
Expansion
vessel
Up to cylinder
volume
DN 20
G 3/4“
6 bar
12 l
200 l
Price
557,–
Spiral piping set
Type
SVS 15/18
!
20
Item No.
1510339
Dimension
Price
736,–
SHS SOLAR HEATING SET
-efficiency
with high
p
ving pum
sa
yenerg
metering
t quantity
with hea
MODULE COLLECTORS 2,5 AND PRO-CLEAN®
Pro-Clean® stratified tank system schematic
Collector
Service
water
mixing
valve 3
Hot
water
Radiators
Underfloor heating
4
Solar sets
1
Solar
station
Oil
Gas
Biomass
Cold water mains
2
Pro-Clean®
!
Note:
Components with Pro-Clean® solar stratified tank
1
+
2
+
+
-efficiency
with high
ing pump
av
-s
gy
er
en
+
!
Module collector FM-S 2,5 (vertical) or FM-W 2,5 (horizontal) without collector installation components
πSimple installation of collectors with different installation sets for in-roof, on-roof,
parallel and free-standing installation
Solar stratified tank Pro-Clean®, including insulation and spherical exchanger
πPatented stratified charging system
πOptimum use of solar energy for hot water and heating
πSimple functional concept without complicated technology (natural principle) = long service life
π Hygienic domestic hot water heating thanks to special corrugated stainless-steel pipe used in a continuous process
3
4
Solar station for wall mounting SSRH 50
with double-loop control unit, solar expansion vessel and suitable connection set
πSolar station and control unit for tank and wall mounting
πAttractive, compact TiSUN® EPP heat insulation jacket for wall and tank mounting, wider version,
with added insulation for safety group
πSolar station with double-loop control unit and a vortex flow sensor for electronic flow control
and energy balance
πWith high-efficiency energy-saving pump, energy class A
πDouble-loop control unit with VFS and PWM connections for controlling the solar pump and energy balance
πSD memory card slot for transferring data to PC
πVent pipe integrated in the solar station
Ready-mixed antifreeze (-25° C) Description see page 46
Collector installation and piping components not included! Accessories for collector installation and piping can be found on page 4
21
Hot water + heating
Connectivity
Configuration of solar heating sets with module collectors (with Pro-Clean® stratified tank)
SHS-E 10S /
PC 500
SHS-E 10W /
PC 500
SHS-E 10S /
PC 800
SHS-E 10W /
PC 800
SHS-E 12,5S /
PC 800
SHS-E 12,5W /
PC 800
1320302
1320303
1320304
1320305
1320306
1320307
up to 4 persons
up to 4 persons
up to 4 persons
up to 4 persons
up to 5 persons
up to 5 persons
4 x FM - S 2,5
10,2 m²
4 x FM - W 2,5
10,2 m²
4 x FM - S 2,5
10,2 m²
4 x FM - W 2,5
10,2 m²
5 x FM - S 2,5
12,75 m²
5 x FM - W 2,5
12,75 m²
PC 500
PC 500
PC 800
PC 800
PC 800
PC 800
Solar station
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SSRH 50
Expansion vessel
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
ST 10
ST 10
ST 10
ST 10
ST 20
ST 20
valve
X
X
X
X
X
X
Antifreeze /
litres
48
48
48
48
48
48
8.746,–
8.873,–
9.183,–
9.315,–
10.005,–
10.166,–
SHS-E 12,5S /
PC 1000 S
SHS-E 12,5W /
PC 1000 S
SHS-E 15S /
PC 1000 S
SHS-E 15W /
PC 1000 S
SHS-E 15S /
PC 1250
SHS-E 15W /
PC 1250
1320308
1320309
1320310
1320311
1320312
1320313
up to 5 persons
up to 5 persons
up to 6 persons
up to 6 persons
up to 6 persons
up to 6 persons
5 x FM - S 2,5
12,75 m²
5 x FM - S 2,5
12,75 m²
6 x FM - S 2,5
15,3 m²
6 x FM - W 2,5
15,3 m²
6 x FM - S 2,5
15,3 m²
6 x FM - W 2,5
15,3 m²
Tank incl.
insulation
PC 1000 S
PC 1000 S
PC 1000 S
PC 1000 S
PC 1250
PC 1250
Solar station
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SSRH 50
Expansion vessel
SAG 33R
SAG 33R
SAG 50R (standing tank)
ST 20
ST 20
ST 20
ST 20
ST 20
ST 20
valve
X
X
X
X
X
X
Antifreeze /
litres
48
48
48
48
48
48
10.258,–
10.419,–
11.173,–
11.368,–
11.851,–
12.047,–
Set
Art.-Nr.
Proposal for size
(household members)
Collectors
Tank incl.
insulation
Tank accessories
Spherical exchanger
Accessories
Price
Set
Art.-Nr.
Proposal for size
(household members)
Collectors
Tank accessories
Spherical exchanger
Accessories
Price
DIN 1988, DIN 4753, part 5, and DIN 4807. Includes permanent-streamed, DHW-compatible membrane expansion tank. DVGW
certified. Also suitable for tanks with corrugated stainless-steel pipe.
Type
BSC - 12l
Item No.
1610488
Dimension
Connection
Safety valve
Expansion vessel
Up to cylinder
volume
DN 20
G 3/4“
6 bar
12 l
200 l
Price
557,–
Spiral piping set
Type
!
22
Item No.
SVS 15/18
1510339
SVS 20/18
1510340
Dimension
Price
736,–
1.167,–
-efficiency
with high
p
ving pum
sa
yenerg
metering
t quantity
with hea
Hot
Domestic water
hot water
mixing 3
valve
Radiators
Solar sets
1 Collector
Underfloor heating
Oil
Gas
Biomass
4
Solar
station
Cold water mains
2 Pro-Clean®
Configuration of solar heating sets with module collectors (with Pro-Clean® stratified tank)
SHS-E
20S /
PC 1500
Set
1320314
Item No.
Recommended size (Household
members)
SHS-E
20W /
PC 1500
SHS-E 20S /
SHS-E
PC /
20W / PC /
PS 1600
PS 1600
1320315
1320408
SHS-E
25,5S / PC /
PS 2000
SHS-E
25,5W / PC /
PS 2000
SHS-E
25,5S /
PC 2000
SHS-E
25,5W /
PC 2000
1320524
1320525
1320320
1320321
1320409
up to 8
up to 8
up to 8
up to 8
up to 12
up to 12
up to 12
up to 12
8 x FM - S 2,5
8 x FM - W 2,5
8 x FM - S 2,5
8 x FM - W 2,5
10 x FM - S 2,5
10 x FM - W 2,5
10 x FM - S 2,5
10 x FM - W 2,5
20,4 m²
20,4 m²
20,4 m²
20,4 m²
25,5 m²
25,5 m²
25,5 m²
25,5 m²
PC 1500
PC 800 +
PS 800
PC 800 +
PS 800
PC 1000
+ PS 1000
PC 1000
+ PS 1000
PC 2000
PC 2000
Collectors
Collector surface area
PC 1500
Solar station
Expansion vessel
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SSRH 50
SAG 80R
(standing tank)
SAG 80R
(standing tank)
SAG 80R
(standing tank)
SAG 80R
(standing tank)
SAG 100R
(standing tank)
SAG 100R
(standing tank)
SAG 100R
(standing tank)
SAG 100R
(standing tank)
Tank accessories
Spherical exchanger
ST 20
ST 20
ST 20
ST 20
ST 40
ST 40
ST 40
ST 40
Priority flap
-
-
1
1
1
1
-
-
Corrugated connection pipes
-
-
4
4
4
4
-
-
Accessories
BMV Thermostatic mixing valve
Frostschutz in Liter
Price
!
1
1
1
1
1
1
1
1
48 l
48 l
48 l
48 l
72 l
72 l
72 l
72 l
14.122,–
14.381,–
14.876,–
15.134,–
17.521,–
17.848,–
17.262,–
17.584,–
SVS 20/18
REG 20
1510340
1520016
Spiral piping set double pipe
20 m pipe length DN 20
Description see page 23)
Regulation set for expansion piping set
(description see page 47)
1.167,–
473,–
Type
Item No.
Description
Price
The BSC boiler safety centre safeguards unvented domestic hot water cylinders up to 560 L in volume, in compliance with DIN 1988, DIN 4753,
part 5, and DIN 4807. Includes permanent-streamed, DHW-compatible membrane expansion tank. DVGW certified. Also suitable for tanks with
corrugated
stainless-steel pipe.
g
Type
BSC - 12l
!
Item No.
1610488
Connection
Safety valve
Expansion vessel
Up to cylinder
volume
Dimension
G 3/4“
6 bar
12 l
200 l
DN 20
Price
557,–
23
Hot water + heating
Pro-Clean® stratified tank system schematic
MODULE COLLECTORS 2,5 AND SOLAR FRESH WATER TANK FS/1R
tq
with hea
1 Collector
Domestic
hot water
mixing 3
valve
Radiators
etering
Connectivity
Fresh water tank system schematic
Hot
water
uantity m
Underfloor heating
Oil
Gas
Biomass
Solar 4
station
Cold water mains
2 Solar fresh water tank
!
Note:
Module collectors can be fed from both sides! For further
information on connectivity, see Technical Catalogue!
Components with FS/1R solar fresh water tank
1
+
+
+
Module collector FM-S 2,5 (vertical) or FM-W 2,5 (horizontal) without collector installation components.
πSimple installation of collectors with different installation sets for in-roof, on-roof,
parallel and free-standing installation
2
Solar fresh water tank FS/1R, including insulation
πCompact multi-functional solar tank system for domestic hot water and heating with one solar coil
πSolar exchanger in the lowest, cold zone with a very large surface area
πHygienic domestic hot water heating thanks to special corrugated stainless-steel pipe used in a
continuous process
3
4
Solar station for tank/wall mounting
with double-loop control unit, solar expansion vessel and suitable connection set
πSolar station and control unit for tank and wall mounting
πAttractive, compact TiSUN® EPP heat insulation jacket for wall and tank mounting, wider version, with
added insulation for safety group
πSolar station with double-loop control unit and a vortex flow sensor for electronic flow control and
energy balance
πSD memory card slot for transferring data to PC
πExhaust pipe integrated in the solar station
+
!
24
Collector installation and piping components not included! Accessories for collector installation and piping can be found on page 4
SHS-E 10W /
FS 500
SHS-E 10S /
FS 800
SHS-E 10W /
FS 800
SHS-E 12,5S /
FS 800
1320324
1320325
1320326
1320327
1320328
up to 4 persons
up to 4 persons
up to 4 persons
up to 4 persons
up to 4 persons
4 x FM - S 2,5
10,2 m²
4 x FM - W 2,5
10,2 m²
4 x FM - S 2,5
10,2 m²
4 x FM - W 2,5
10,2 m²
5 x FM - S 2,5
12,75 m²
FS 500/1R
FS 500/1R
FS 800/1R
FS 800/1R
FS 800/1R
SSR 25
SSR 25
SSR 25
SSR 25
SSR 25
SAG 33R
SAG 33R
SAG 33R
SAG 33R
SAG 33R
valve
X
X
X
X
X
16
16
16
16
22
7.113,–
7.245,–
7.510,–
7.642,–
8.326,–
SHS-E 12,5W /
FS 800
SHS-E 12,5S /
FS 1000S
SHS-E 12,5W /
FS 1000S
SHS-E 15S /
FS 1000S
SHS-E 15W /
FS 1000S
1320329
1320330
1320331
1320332
1320333
up to 4 persons
up to 5 persons
up to 5 persons
up to 6 persons
up to 6 persons
5 x FM - W 2,5
12,75 m²
5 x FM - S 2,5
12,75 m²
5 x FM - W 2,5
12,75 m²
6 x FM - S 2,5
15,3 m²
6 x FM - W 2,5
15,3 m²
FS 800/1R
FS 1000S/1R
FS 1000S/1R
FS 1000S/1R
FS 1000S/1R
SSR 25
SSR 25
SSR 25
SSR 25
SSR 25
SAG 33R
SAG 33R
SAG 33R
SAG 50R
(standing tank)
SAG 50R
(standing tank)
valve
X
X
X
X
X
22
22
22
22
22
8.493,–
8.556,–
8.717,–
9.482,–
9.678,–
Item No.
Recommended size
(Household members)
Collectors
Solar station
Expansion vessel
Accessories
Price
Set
Item No.
Recommended size
(Household members)
Collectors
Solar station
Expansion vessel
Accessories
Price
DIN 1988, DIN 4753, part 5, and DIN 4807. Includes permanent-streamed, drinking water compatible membrane expansion tank.
DVGW certified. Also suitable for tanks with corrugated stainless-steel pipe.
Type
BSC -12l
Item No.
1610488
Dimension
Connection
Safety valve
Expansion vessel
Up to cylinder
volume
DN 20
G 3/4“
6 bar
12 l
200 l
Price
557,–
Spiral piping set
Type
!
Item No.
SVS 15/18
1510339
SVS 20/18
1510340
Dimension
Price
736,–
1.167,–
25
Solar sets
SHS-E 10S /
FS 500
Set
Hot water + heating
Configuration of solar heating sets with module collectors (with FS fresh water tank)
NEW
THERMOSIPHON-SYSTEM
SIMPLE AND EFFICIENT HOT WATER GENERATION
A solar hot water system with impressive features such as quick setup, low maintenance and high level of efficiency.
The system works to the thermosiphon principle, meaning that heat is transferred entirely by means of natural convection with no pumps or controllers.
The solar fluid heated in the collector rises and transfers heat through a highly efficient tank-in-tank system, with riser to ensure optimum stratification,
to the domestic hot water in the enamelled tank. High-selectivity harp absorbers are used to guarantee the highest possible solar yield in this system.
Solar Keymark
Product description
Collector
Modular flat plate collector with aluminium frame, full-area absorber (laser-welded) with high-selectivity coating (meandering flow)
Frame
Enamelled hot water tank with tank-in-tank heat exchanger (two risers for solar charging and hot water output). Two integrated sacrificial magnesium
anodes. A secondary electric heat source can be fitted as an option at a later time.
Piping/accessories
Contains all necessary preinsulated pipes and fittings, safety valves and anti-freeze
Covers
Two lateral piping ducts and a front cover
Thermosiphon-System
Type
Item No.
Gross area
No. of collectors
Tank volume
Weight
Price
THSY160 1H
1310005
2,09 m²
1
145 l
170 kg
1.829,–
THSY200 1H
1310006
2,09 m²
1
192 l
185 kg
2.059,–
THSY300 2H
1310008
4,18 m²
2
282 l
270 kg
3.094,–
THERMOSIPHON SYSTEM ACCESSORIES
Domestic hot water mixing valve
Scald protection and constant-temperature domestic hot water tapping, suitable for up to max. 8 households,
temperature range 30-65 °C, flow at 3 bar max. 63 l/min
Type
Item No.
BMV 34
BMV 1
NEW
Type
26
Connection
1510328
Male thread 1“ with reduction threaded connection 3/4“
1510480
1“ male thread with 1“ reduction screw joint
Item No.
Connection
Price
84,–
133,–
Price
THSY EH 1,5
1310009
Electric heating element for 1.5 kW thermosiphon system
68,–
THSY EH 2,5
1310010
68,–
THSY EH 3,5
1310011
68,–
Thermosiphon
Thermosiphon-System roof fixing components
Fixing type
Item No.
Price
THSY 160 1H
THSY 200 1H
THSY 300 2H
No. of roof fixings
Height
Duo hanger bolt
Universal mounting
fixture
1430043
41,–
Rafter anchor for
1430029
34,–
Rafter anchor for
1430416
Joint clamp
4
6
4
4
6
35,–
4
4
6
1430041
28,–
6
6
–
Solar bracket for
side lock panels
1430032
68,–
4
4
6
50 mm
1420644
45,–
4
4
6
Profiled console for
profiled or corrugated
sheet metal
1430039
55,–
6
6
–
Please fill in the data sheet when ordering
(required for internal processing). Note: not
held in stock! minimum order quantity 50.
Corrugated cement asbestos calotte for corrugation 5 (5 corrugations/m)
1420074
29,–
6
6
–
(required for internal processing).
Corrugated cement asbestos calotte for corrugation 8 (8 corrugations/m)
1420075
29,–
6
6
–
(required for internal processing). Note: not
held in stock!
1410001
1,67
4
4
4
4
40°
27
IN-ROOF COLLECTOR
FI LARGE COLLECTOR PRODUCT OVERVIEW
Solar Keymark
Panel distribution
Large collector for in-roof installation
3m
Large collector ready for connection in different sizes (from 4 to 18 m2) for quick installation
with mobile crane by our installation team in any weather conditions (see page 61). The FI
large collector can be used for any roof covering.
2m
2m
3m
4m
5m
6m
1m
Product description
1)
Design
In-roof flat plate collector
Installation
Roof pitches from 15° to 70°/facade1 up to 90°
Snow load pressure
max. 300 kg/m2
Housing
Anthracite powder-coated (RAL 7016) aluminium/wooden frame construction with wooden rear panel
Absorber
Connectors
4 / copper pipes (22 x 0.8 mm), including cutting ring, support sleeve and union nut
Cover
Note: For projects with facade collectors, check country-specific building regulations for facade glass (TSG-H glass, DIN EN 14179/1 available at extra cost).
FI 1 in-roof collector
Type
Aperture area
External dimensions
(H × W × D)
Weight
Price
Item No.
Gross area
FI 1/4
1430364
4,30 m²
3,66 m²
1,07 x 4,01 x 0,11 m
105 kg
1.669,–
FI 1/5
1430365
5,37 m²
4,57 m²
1,07 x 5,01 x 0,11 m
132 kg
2.028,–
FI 1/6
1430366
6,43 m²
5,49 m²
1,07 x 6,00 x 0,11 m
160 kg
2.434,–
Type
Aperture area
External dimensions
(H × W × D)
Weight
Price
Item No.
Gross area
FI 2/2
1430367
4,10 m²
3,62 m²
2,01 x 2,02 x 0,11 m
102 kg
1.406,–
FI 2/3
1430368
6,10 m²
5,43 m²
2,01 x 3,02 x 0,11 m
152 kg
1.956,–
FI 2/4
1430369
8,10 m²
7,24 m²
2,01 x 4,01 x 0,11 m
202 kg
2.626,–
FI 2/5
1430370
10,10 m²
9,10 m²
2,01 x 5,01 x 0,11 m
250 kg
3.140,–
FI 2/6
1430371
12,10 m²
10,86 m²
2,01 x 6,00 x 0,11 m
302 kg
3.726,–
Item No.
Gross area
Aperture area
FI 3/2
1430372
6,10 m²
5,52 m²
3,01 x 2,02 x 0,11 m
150 kg
1.944,–
FI 3/3
1430373
9,10 m²
8,29 m²
3,01 x 3,02 x 0,11 m
225 kg
2.877,–
FI 3/4
1430374
12,10 m²
11,10 m²
3,01 x 4,01 x 0,11 m
302 kg
3.905,–
FI 3/5
1430375
15,10 m²
13,82 m²
3,01 x 5,01 x 0,11 m
375 kg
4.802,–
FI 3/6
1430376
18,10 m²
16,58 m²
3,01 x 6,00 x 0,11 m
450 kg
5.879,–
Type
28
External dimensions
(H × W × D)
Weight
Price
IN-ROOF COLLECTOR
The FI customised collector is also suitable for installation in the building facade.
Custom size A (rectangular)
Custom size B (not rectangular)
In-roof large collector, rectangular with customised width, height and
connection
Large collector installation, non-rectangular with custom width, height
and connection. Different angles are available.
Type
Item No.
FI-SMA
!
1430377
Collector type
Dimensions
In-roof FI
per m²
gross area
Price
547,–
Type
FI-SMB
Item No.
1430378
Dimensions
In-roof FI
per m²
gross area
Price
673,–
With special sizes please note:
The precise collector dimensions must be provided (max. 3 x 6 m). Measurement on site is charged on a time and material basis. Bolting and installation of the customised collectors on request.
Type
Item No.
Hydraulic connection set
For the connection and expansion compensation of large collectors
with corrugated stainless-steel pipe and cutting ring fitting including
insulation, sensor pocket, dummy plug and installation instructions for
large collectors.
!
Collector type
Technical tip:
A connection and expansion compensation set is recommended to vouchsafe
a warranty, otherwise a connection piping set (AVS, page 47) has to be used.
Both connection lengths can be used for forward and return flow..
Connection
lengths pipe 1
Connection
lengths pipe 2
Price
HAS 03
1430634
0,3 m
0,3 m
101,–
HAS 11
1430000
1m
1m
146,–
HAS 12
1430001
1m
2m
168,–
HAS 13
1430002
1m
3m
183,–
HAS 14
1430003
1m
4m
218,–
HAS 22
1430004
2m
2m
206,–
HAS 23
1430005
2m
3m
213,–
HAS 24
1430006
2m
4m
225,–
HAS 33
1430007
3m
3m
260,–
HAS 34
1430008
3m
4m
262,–
HAS 44
1430009
4m
4m
286,–
Hydraulic expansion set
Type
Description
Price
Item No.
Connection length
HES-U
1410307
235 mm
Hydraulic expansion set one above the other, serial
53,–
HES-N
1410000
130 mm
Hydraulic expansion set side by side, parallel
54,–
HES-NS 1
1410214
1m
Hydraulic expansion set side by side, serial
76,–
HES-NS 2
1410216
2m
107,–
HES-NS 3
1410217
3m
142,–
29
Large collector
FI customised collector
IN-ROOF COLLECTOR
Flashing set for FI single collector
Watertight, anthracite-coloured aluminium flashing for tiled roof, plain tile, slate and Spanish tile.
For a roof pitch of 15°–23° or 23°–70°, including wooden and foam wedges, easy to insert and
extend.
23° – 70°
15° – 23°
Item No.
Price
Item No.
FI 1/4
1420389
1.001,–
1420402
897,–
FI 1/5
1420390
667,–
1420403
1.018,–
FI 1/6
1420391
1.329,–
1420404
1.196,–
FI 2/2
1420392
667,–
1420405
593,–
FI 2/3
1420393
857,–
1420406
765,–
GSE
1
Set includes all 4 corners
FI 2/4
1420394
1.047,–
1420407
943,–
GSH
2
For 1 m, 2 m or 3 m high collectors, includes the external side parts of
the bottom row of collectors
FI 2/5
1420395
1.185,–
1420408
1.064,–
3
External upper and lower parts, for each metre in width
1420396
1.375,–
1420409
1.237,–
ESFR
FI 2/6
FI 3/2
1420397
719,–
1420410
644,–
ESR (15/23)
4
External upper and lower parts for connection between 2 adjacent
collectors
FI 3/3
1420398
909,–
1420411
823,–
ESR (1/2/3)
5
Vertical intermediate sheeting for connection between 2 adjacent
collectors
FI 3/4
1420399
1.099,–
1420412
995,–
6
FI 3/5
1420413
1.116,–
Includes the external side parts of the upper row of collectors and the
side connections to the lower row
1420400
1.237,–
ESO
FI 3/6
1420401
1.426,–
1420414
1.294,–
ESOF
7
Horizontal intermediate sheeting for connecting two glass panels
above one another
ESOR
8
Connecting element between 4 collectors
HGKS
9
Wooden wedge basic set includes 2 short wooden underlay wedges
(2x Part 9)
HKES
10
Wooden wedge expansion set includes 1 long wooden underlay
wedge (1 x Part 10)
Flashing
Price
Individual parts for the flashing of the
FI large collector
Including fixings and seals (order wooden wedge sets separately)
Type
Item
For roof pitch
Item No.
Price
GSE 15
1
15° – 23°
1410156
512,–
GSE 23
1
23° – 70°
1410159
443,–
Type
Item.
Type
Item.
Use
Wooden wedge set for
roof pitch
15° – 23° Wooden wedge
basic set
basic set
expansion set
expansion set
Item No.
Price
1430434
20,–
1430436
15,–
1430435
17,–
1430437
12,–
GSH 1
2
any
1410162
110,–
HKGS 15
9
GSH 2
2
any
1410163
156,–
HKGS 23
9
GSH 3
2
any
1410164
213,–
HKES 15
10
1ESFR 15
3
15° – 23°
1410157
184,–
HKES 23
10
3ESFR 15
3
15° – 23°
1410158
495,–
1ESFR 23
3
23° – 70°
1410160
173,–
Type
Underlay material
3ESFR 23
3
23° – 70°
1410161
461,–
UMAT22
FI 2/2 one above the other
1430081
22,–
ESR 15
4
15° – 23°
1410165
133,–
UMAT23
1430082
33,–
ESR 23
4
23° – 70°
1410166
104,–
UMAT24
FI 2/4 (1/4) one above the other
1430083
33,–
ESR 1
5
any
1410167
27,–
UMAT25
1430084
36,–
ESR 2
5
any
1410168
38,–
UMAT26
1430085
39,–
ESR 3
5
any
1410169
60,–
UMAT32
1430086
23,–
ESO 1
6
any
1410170
172,–
UMAT33
1430087
44,–
ESO 2
6
any
1410171
213,–
UMAT34
1430088
45,–
ESO 3
6
any
1410172
293,–
UMAT35
1430089
51,–
1ESOF
7
any
1410173
25,–
UMAT36
1430090
53,–
3ESOF
7
any
1410174
64,–
ESOR
8
any
1410175
14,–
30
!
Item No.
Price
Technical tip: The underlay material is required for each 2 m and 3 m high FI collector to achieve
a scale-like arrangement in the top row.
IN-ROOF COLLECTOR
one row
15° – 23°
two rows
18° – 26°
15° – 23°
Flashing kit for multiple FI collectors from 15° – 23°
For a roof pitch of 15 – 23°, easy to insert and extend, including wooden or foam wedges and underlay material for the top collector.
Flashing of collector combinations not shown here can be easily worked out using the diagram on page 30.
2 FI large collectors in two rows
2 panels
Height of the collectors
3 panels
Price
Item No.
4 panels
5 panels
6 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
4 m (2 + 2)
1420456
886,–
1420457
1.110,–
1420458
1.323,–
1420459
1.478,–
1420460
1.697,–
5 m (3 + 2)
1420475
943,–
1420476
1.168,–
1420477
1.380,–
1420478
1.536,–
1420479
1.748,–
6 m (3 + 3)
1420494
1.018,–
1420495
1.254,–
1420496
1.467,–
1420497
1.622,–
1420498
1.840,–
2 FI large collectors in one row
8 panels
9 panels
10 panels
11 panels
12 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
1m
–
–
1420415
1.806,–
1420416
1.996,–
1420417
2.191,–
1420418
2.323,–
1420419
2.513,–
2m
1420428
1.725,–
1420429
1.863,–
1420430
2.053,–
1420431
2.243,–
1420432
2.381,–
1420433
2.571,–
3m
1420442
1.800,–
1420443
1.938,–
1420444
2.128,–
1420445
2.318,–
1420446
2.456,–
1420447
2.645,–
7 panels
8 panels
9 panels
10 panels
11 panels
12 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
4 m (2 + 2)
1420461
2.145,–
1420462
2.295,–
1420463
2.513,–
1420464
2.732,–
1420465
2.881,–
1420466
3.100,–
5 m (3 + 2)
1420480
2.220,–
1420481
2.369,–
1420482
2.588,–
1420483
2.806,–
1420484
2.956,–
1420485
3.174,–
6 m (3 + 3)
1420499
2.335,–
1420500
2.490,–
1420501
2.709,–
1420502
2.927,–
1420503
3.082,–
1420504
3.295,–
13 panels
14 panels
15 panels
16 panels
17 panels
18 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
1m
1420420
2.858,–
1420421
3.157,–
1420422
3.186,–
1420423
3.376,–
1420424
3.508,–
1420425
3.703,–
2m
1420434
2.921,–
1420435
3.059,–
1420436
3.249,–
1420437
3.439,–
1420438
3.577,–
1420439
3.767,–
3m
1420448
3.019,–
1420449
3.157,–
1420450
3.347,–
1420451
3.537,–
1420452
3.675,–
1420453
3.864,–
13 panels
14 panels
15 panels
16 panels
17 panels
18 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
4 m (2 + 2)
1420467
3.571,–
1420468
3.726,–
1420469
3.939,–
1420470
4.158,–
1420471
4.307,–
1420472
4.526,–
5 m (3 + 2)
1420486
3.669,–
1420487
3.818,–
1420488
4.037,–
1420489
4.152,–
1420490
4.301,–
1420491
4.623,–
6 m (3 + 3)
1420505
3.818,–
1420506
3.979,–
1420507
4.198,–
1420508
4.411,–
1420509
4.566,–
1420510
4.779,–
19 panels
20 panels
Item No.
Price
Item No.
Price
1m
1420426
4.043,–
1420427
4.181,–
2m
1420440
4.117,–
1420441
3m
1420454
4.238,–
1420455
19 panels
20 panels
Item No.
Price
Item No.
Price
4 m (2 + 2)
1420473
4.986,–
1420474
5.141,–
4.255,–
5 m (3 + 2)
1420492
5.106,–
1420493
5.256,–
4.370,–
6 m (3 + 3)
1420511
5.296,–
1420512
5.451,–
31
Large collector
7 panels
IN-ROOF COLLECTOR
23° – 70°
one row
two rows
26° – 70°
23° – 70°
Flashing set for multiple FI collectors 23°–70°
For a roof pitch of 23 – 70°, easy to insert and extend, including wooden or foam wedges and underlay material for the top collector.
Flashing of collector combinations not shown here can be easily worked out using the diagram on page 30.
2 panels
3 panels
Price
Item No.
4 panels
5 panels
6 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
4 m (2 + 2)
1420554
811,–
1420555
1.024,–
1420556
1.219,–
1420557
1.357,–
1420558
1.559,–
5 m (3 + 2)
1420573
869,–
1420574
1.076,–
1420575
1.277,–
1420576
1.415,–
1420577
1.616,–
6 m (3 + 3)
1420592
943,–
1420593
1.162,–
1420594
1.363,–
1420595
1.501,–
1420596
1.702,–
7 panels
8 panels
9 panels
10 panels
11 panels
12 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
1m
–
–
1420513
1.616,–
1420514
1.789,–
1420515
1.961,–
1420516
2.088,–
1420517
2.260,–
2m
1420526
1.547,–
1420527
1.668,–
1420528
1.846,–
1420529
2.019,–
1420530
2.139,–
1420531
2.318,–
3m
1420540
1.622,–
1420541
1.743,–
1420542
1.921,–
1420543
2.093,–
1420544
2.214,–
1420545
2.392,–
7 panels
8 panels
9 panels
10 panels
11 panels
12 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
4 m (2 + 2)
1420559
1.967,–
1420560
2.099,–
1420561
2.300,–
1420562
2.502,–
1420563
2.640,–
1420564
2.841,–
5 m (3 + 2)
1420578
2.042,–
1420579
2.174,–
1420580
2.375,–
1420581
2.582,–
1420582
2.714,–
1420583
2.916,–
6 m (3 + 3)
1420597
2.157,–
1420598
2.295,–
1420599
2.502,–
1420600
2.703,–
1420601
2.841,–
1420602
3.042,–
13 panels
14 panels
15 panels
16 panels
17 panels
18 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
1m
1420518
2.559,–
1420519
2.680,–
1420520
2.852,–
1420521
3.031,–
1420522
3.151,–
1420523
3.324,–
2m
1420532
2.622,–
1420533
2.743,–
1420534
2.921,–
1420535
3.094,–
1420536
3.215,–
1420537
3.393,–
3m
1420546
2.720,–
1420547
2.921,–
1420548
3.019,–
1420549
3.192,–
1420550
3.312,–
1420551
3.491,–
13 panels
14 panels
15 panels
16 panels
17 panels
18 panels
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
Item No.
Price
4 m (2 + 2)
1420565
3.272,–
1420566
3.410,–
1420567
3.611,–
1420568
3.813,–
1420569
3.951,–
1420570
4.152,–
5 m (3 + 2)
1420584
3.370,–
1420585
3.508,–
1420586
3.709,–
1420587
3.910,–
1420588
4.048,–
1420589
4.250,–
6 m (3 + 3)
1420603
3.525,–
1420604
3.663,–
1420605
3.870,–
1420606
4.066,–
1420607
4.204,–
1420608
4.405,–
19 panels
20 panels
Item No.
Price
Item No.
Price
1m
1420524
3.623,–
1420525
3.744,–
2m
1420538
3.703,–
1420539
3m
1420552
3.818,–
1420553
32
19 panels
20 panels
Item No.
Price
Item No.
Price
4 m (2 + 2)
1420571
4.572,–
1420572
4.710,–
3.824,–
5 m (3 + 2)
1420590
4.687,–
1420591
4.825,–
3.939,–
6 m (3 + 3)
1420609
4.876,–
1420610
5.020,–
ON-ROOF COLLECTOR
FA LARGE COLLECTOR PRODUCT OVERVIEW
Panel distribution
Solar Keymark
Large collector for on-roof and free-standing installation
3m
Large collector ready for connection in different sizes from 3 –18 m² for fast installation with mobile
crane by our installation team in any weather conditions. The FA large collector can be used for any
type of roof and installation option with the corresponding installation systems frames (see page 34
onwards).
2m
2m
1,5m
3m
4m
5m
6m
1m
Design
On-roof flat plate collector
On-roof
Collector tilt angles from 15° to 70°/facade1 up to 90°
Snow load pressure
max. 300 kg/m2
Housing
Anthracite powder-coated (RAL 7016) aluminium/frame construction with aluminium sandwich rear panel
Absorber
Connectors
4 / copper pipes (22 x 0.8 mm), including cutting ring, support sleeve and union nut
Cover
1)
Large collector
Product description
Note: For projects with facade collectors, check country-specific building regulations for facade glass (TSG-H glass, DIN EN 14179/1 available at extra cost).
FA 1 on-roof collector
Type
Price
Item No.
Gross area
Aperture area
Weight
FA 1/3
1430379
3,24 m²
2,74 m²
1,07 x 3,02 x 0,13 m
73 kg
1.657,–
FA 1/4
1430380
4,30 m²
3,66 m²
1,07 x 4,01 x 0,13 m
96 kg
1.838,–
FA 1/5
1430381
5,37 m²
4,57 m²
1,07 x 5,01 x 0,13 m
122 kg
2.291,–
FA 1/6
1430382
6,43 m²
5,49 m²
1,07 x 6,00 x 0,13 m
147 kg
2.745,–
FA 1,5 on-roof collector
Type
Price
Item No.
Gross area
Aperture area
Weight
FA 1,5/3
1430393
4,56 m²
4,01 m²
1,51 x 3,02 x 0,13 m
106 kg
1.884,–
FA 1,5/4
1430394
6,04 m²
5,33 m²
1,51 x 4,01 x 0,13 m
140 kg
2.458,–
FA 1,5/5
1430397
7,58 m²
6,67 m²
1,51 x 5,01 x 0,13 m
176 kg
3.050,–
FA 1,5/6
1430398
9,04 m²
8,01 m²
1,51 x 6,00 x 0,13 m
210 kg
3.559,–
Item No.
Gross area
Aperture area
Weight
FA 2/2
1430383
4,10 m²
3,62 m²
2,01 x 2,02 x 0,13 m
94 kg
1.541,–
FA 2/3
1430384
6,10 m²
5,43 m²
2,01 x 3,02 x 0,13 m
140 kg
2.226,–
FA 2/4
1430385
8,10 m²
7,24 m²
2,01 x 4,01 x 0,13 m
186 kg
2.865,–
FA 2/5
1430386
10,10 m²
9,10 m²
2,01 x 5,01 x 0,13 m
232 kg
3.475,–
FA 2/6
1430387
12,10 m²
10,86 m²
2,01 x 6,00 x 0,13 m
278 kg
4.312,–
Item No.
Gross area
Aperture area
Weight
FA 3/2
1430388
6,10 m²
5,52 m²
3,01 x 2,02 x 0,13 m
140 kg
2.099,–
FA 3/3
1430389
9,10 m²
8,29 m²
3,01 x 3,02 x 0,13 m
209 kg
3.146,–
FA 3/4
1430390
12,10 m²
11,10 m²
3,01 x 4,01 x 0,13 m
278 kg
4.145,–
FA 3/5
1430391
15,10 m²
13,82 m²
3,01 x 5,01 x 0,13 m
345 kg
5.161,–
FA 3/6
1430392
18,10 m²
16,58 m²
3,01 x 6,00 x 0,13 m
414 kg
6.327,–
Type
Price
Type
Price
33
ON-ROOF COLLECTOR
FA customised collector The FA customised collector is also suitable for installation on the building facade.
Custom size A (rectangular)
Custom size B (not rectangular)
On-roof large collector, rectangular with customised width, height and
connection
On-roof large collector, not rectangular with customised width, height
and connection. Different angles possible.
Type
Item No.
FA-SMA
!
1430400
Collector type
Dimensions
On-roof FA
per m²
gross area
Price
570,–
Type
Item No.
FA-SMB
1430401
Collector type
Dimensions
On-roof FA
per m²
gross area
Price
731,–
With special sizes please note: The precise collector dimensions have to be provided (max. 3 x 6 m). Measurement on site is charged on a time and material basis.
COLLECTOR INSTALLATION COMPONENTS – PARALLEL ON THE ROOF
For parallel installation on different types of roofs using customised roof fixing components.
Select the appropriate frame here then select the correct roof fixings on pg. 36 (see sample calculation).
Collector frame (without roof fixings)
On-roof parallel
Frame
FA 1/3
FA 1/4
FA 1/5
FA 1/6
FA 1,5/3
FA 1,5/4
FA 1,5/5
Item No.
1420000
1420001
1420002
1420003
1420014
1420015
1420016
Price
152,–
199,–
234,–
245,–
152,–
187,–
211,–
Minimum number of pieces of roof fixings required (for specified collector area loading)
Duo hanger bolts
calotte
1.5 kN/m² (150 kg/m²)
4
4
6
6
4
6
6
3.0 kN/m² (300 kg/m²)
6
6
8
10
8
10
12
1.5 kN/m² (150 kg/m²)
4
4
6
6
4
6
6
3.0 kN/m² (300 kg/m²)
6
6
8
10
8
10
12
0.75 kN/m² (75 kg/m²)
4
4
6
6
4
6
6
1.5 kN/m² (150 kg/m²)
6
6
8
10
8
10
12
Profiled bracket
roof
Plain tile hook
COLLECTOR MOUNTING COMPONENTS – PARALLEL ON THE ROOF AND FREE-STANDING
For parallel installation on different types of roofs using customised roof fixing components and free-standing installation using extraction-proof anchor bolts.
The corresponding fixings and the frame appropriate for the collector have to be selected separately (see sample calculation).
Collector frame (without fixings for roof-standing and free-standing installation)
max. 50°
of 50°
max. 30°
of 30°
max. 10°
of 10°
Frame
FA 1/3
FA 1/4
FA 1/5
FA 1/6 FA 1,5/3 FA 1,5/4 FA 1,5/5 FA 1,5/6
Item No.
1420018
1420019
1420020
1420021
1420032
1420033
1420034
1420035
Price
187,–
206,–
297,–
322,–
279,–
353,–
418,–
538,–
Item No.
1420036
1420037
1420038
1420039
1420050
1420051
1420052
1420053
Price
198,–
231,–
315,–
337,–
286,–
359,–
423,–
548,–
Item No.
1420054
1420055
1420056
1420057
1420068
1420069
1420070
1420071
Price
207,–
234,–
325,–
345,–
298,–
374,–
430,–
561,–
Minimum quantity of roof fixings required for roof and free-standing installation (for specified collector area loading)
Duo hanger bolts
1.5 kN/m² (150 kg/m²)
4
4
6
6
4
6
6
8
3.0 kN/m² (300 kg/m²)
6
6
8
10
8
10
12
14
1.5 kN/m² (150 kg/m²)
4
4
6
6
4
6
6
8
3.0 kN/m² (300 kg/m²)
6
6
8
10
8
10
12
14
10
14
16
20
12
14
18
22
2
2
3
3
2
3
3
4
Bitumen flange plate, H=50
calotte
Profiled bracket
roof
34
Snow load up to
2.5 kN/m² (300 kg/m²)
to 0.75 kN/m² (75 kg/m²)
Collector frame (without roof fixings)
FA 2/2
FA 2/3
FA 2/4
FA 2/5
FA 2/6
FA 3/2
FA 3/3
FA 3/4
FA 3/5
FA 3/6
1420017
1420004
1420005
1420006
1420007
1420008
1420009
1420010
1420011
1420012
1420013
220,–
107,–
140,–
179,–
197,–
220,–
140,–
179,–
229,–
258,–
286,–
8
4
6
8
8
10
6
8
10
12
15
14
6
10
12
14
18
9
15
18
21
27
8
4
6
8
8
10
6
8
10
12
15
14
6
10
12
14
18
9
15
18
21
27
8
4
6
8
8
10
6
8
10
12
15
14
6
10
12
14
18
9
15
18
21
27
Collector frame (without fixings for roof-standing and
free-standing installation)
FA 2/2
FA 2/3
FA 2/4
FA 2/5
1420022
1420023
1420024
1420025 1420026
294,–
321,–
394,–
467,–
634,–
1420040
1420041
1420042
1420043
302,–
363,–
411,–
1420058
1420059
309,–
Large collector
FA 1,5/6
Collector frame for installation at right angles Collector frame for free-standing installation on foundato the gable (without roof fixings)
tion (concrete ballast), without fixings
FA 2/6 FA 1,5/3 FA 1,5/4 FA 1,5/5 FA 1,5/6 FA 3/2
FA 3/4
FA 3/5
FA 3/6
1420671
1420674
1420677
1420027
1420028
1420029
1420030
1420031
282,–
406,–
432,–
555,–
559,–
603,–
765,–
856,–
1.155,–
1420044
1420669
1420672
1420675
1420678
1420045
1420046
1420047
1420048
1420049
487,–
657,–
284,–
411,–
437,–
563,–
616,–
700,–
839,–
939,–
1.181,–
1420060
1420061
1420062
1420670
1420673
1420676
1420679
1420063
1420064
1420065
1420066
1420067
353,–
435,–
516,–
698,-
291,–
420,–
447,–
575,–
640,–
712,–
844,–
951,–
1.191,–
4
6
8
8
10
4
6
6
8
–
–
–
–
–
6
10
12
14
18
8
10
12
14
–
–
–
–
–
4
6
8
8
10
4
6
6
8
6
8
10
12
15
6
10
12
14
18
8
10
12
14
9
15
18
21
27
8
12
14
18
22
12
14
18
22
–
–
–
–
–
2
2
3
3
4
2
3
3
4
–
–
–
–
–
1420668
FA 3/3
35
ON-ROOF COLLECTOR
FA ROOF FIXINGS
Fixing type
Item No.
Price
Fixing type
Item No.
Price
Duo hanger bolt
1430043
41,–
bitumen roof, height 50 mm
1420644
45,–
Rafter anchor for
1430029
34,–
for bitumen roof, height
240 mm
1420643
68,–
Rafter anchor for
1430416
35,–
Profiled console for
profiled or corrugated
sheet metal 1
1430039
55,–
Plain tile hook
for plain tile roof
1420072
39,–
5 (5 corrugations/m) ²
1420074
29,–
Joint clamp
1430041
28,–
8 (8 corrugations/m) 3
1420075
29,–
Universal securing cable
sets for standing seam
roofs
1420688
222,–
1410001
1,67
Joint clamp for securing
cable set and snow guard
system 1“
1430508
21,–
with height adjustment
1430042
9,57
Solar bracket for
side lock panels
1430032
68,–
Height
1)
Complete the data sheet when ordering (required for internal processing). Note: not held in stock, minimum order quantity 50 pcs.
Complete the data sheet when ordering (required for internal processing). Note: check standing installation of FM-W at right angles to the gable separately!
3)
Complete the data sheet when ordering (required for internal processing). Note: not held in stock, check standing installation of FM-W at right angles to the gable separately!
2)
36
ON-ROOF COLLECTOR
COLLECTOR INSTALLATION COMPONENTS – PARALLEL ON THE ROOF AND FREE-STANDING
Bracing set for installation at right angles to the gable
Required for additional attachment of 1-2 m FA collectors installed at right angles to the gable, roof pitch 10° -30°. 1-3 bracing sets are required per
collector depending on the number of mounting racks.
NEW
Type
Item No.
VSQ
1430062
Price
Collector
37,–
FA 1-2 metres high
Mechanical connection set
For mechanical connection of two FA collectors positioned side by side/one above the other, up to a roof pitch of 30° (including cover plate for
piping (for adjacent collectors)
Item No.
Collector
Price
Description
MVS-V 1
1420638
FA 1 metre high
Vertical connection
41,–
MVS-V 1,5
1420639
FA 1.5 metres high
Vertical connection
53,–
MVS-V 2
1420641
FA 2 metres high
Vertical connection
65,–
MVS-V 3
1420642
FA 3 metres high
Vertical connection
77,–
MVS-H
1430419
For all FA
Horizontal connection
78,–
Piping duct at the side
The piping duct at the side made of anthracite coated aluminium sheet protects and conceals the connection piping of
FA collectors. Set consisting of piping duct and fixings
Type
Item No.
Price
Collector
FA-VS 1
1410221
FA 1 metre high
111,–
FA-VS 1,5
1410222
FA 1.5 metres high
143,–
FA-VS 2
1410223
FA 2 metres high
178,–
FA-VS 3
1410224
FA 3 metres high
260,–
FA LARGE COLLECTOR PRODUCT OVERVIEW
Hydraulic connection set
For the connection and expansion compensation of large collectors with corrugated stainlesssteel pipe and cutting ring fitting including insulation, sensor pocket, dummy plug and installation instructions for large collectors.
HAS 03
HAS 11
HAS 12
HAS 13
HAS 14
HAS 22
HAS 23
HAS 24
HAS 33
HAS 34
HAS 44
0,3 m / 0,3 m
1m/1m
1m/2m
1m/3m
1m/4m
2m/2m
2m/3m
2m/4m
3m/3m
3m/4m
4m/4m
Item No.
1430634
1430000
1430001
1430002
1430003
1430004
1430005
1430006
1430007
1430008
1430009
Price
101,–
146,–
168,–
183,–
218,–
206,–
213,–
225,–
260,–
262,–
286,–
Type
Connection
lengths (pipe 1/
pipe 2)
!
Technical tip: A connection and expansion compensation set is recommended to vouchsafe a warranty, otherwise a connection piping set (AVS, page 4) has to be used.
Both connection lengths can be used for forward and return flow.
Hydraulic expansion set
Type
Item No.
Connection length
Description
Price
HES-U
1410307
235 mm
Hydraulic expansion set one above the other, serial
53,–
HES-N
1410000
130 mm
Hydraulic expansion set side by side, parallel
54,–
HES-NS 1
1410214
1m
76,–
HES-NS 1,5
1410215
1,5 m
89,–
HES-NS 2
1410216
2m
107,–
HES-NS 3
1410217
3m
142,–
37
Large collector
Type
SOLAR CONTROL UNITS
Simplex Basic single-loop solar control unit
Electronic temperature difference control unit for single-loop solar system with additional output for secondary heat ource.
Type
LED Simplex
Item No.
1510413
Price
Designation
190,–
Including 1 collector and 2 tank sensors
Duplex Basic dual-loop solar control unit
Electronic temperature difference control unit for dual-loop solar and heating systems with additional output for secondary
heat source and heat quantity metering.
Type
VPM Duplex
Item No.
1510318
Price
Designation
325,–
Including 2 collector and 2 tank sensors
Multiplex Advanced multiple-loop solar control unit, complete set
consisting of:
πDuplex Basic dual-loop solar control unit (1510318)
πMultiplex Advanced multiple-loop solar control unit expansion module (1510348), with 1 m connecting cable for digital
interface
πDuplex – Multiplex
πElectronic multi-functional temperature difference control unit for multiple-loop solar and heating systems.
Type
VPM Multiplex
Item No.
1510319
Price
Designation
748,–
Including 2 collector and 4 tank sensors, 1 m connecting cable RJ45
Multiplex Advanced multiple-loop solar control unit expansion module
Multiplex expansion module with connecting cable for digital interface to Duplex Basic dual-loop solar control unit.
Type
VPM-E Multiplex
Item No.
1510348
Price
Designation
467,–
Including 2 tank sensors and 1 m connecting cable RJ45
Specifications for solar control units
Standard configuration
Item no.
Simplex
Duplex
Multiplex
1510413
1510318
1510319
×/-/-
-/×/-
-/-/×
LED/graphic display
×/-
-/×
-/×
Standard/additional systems
1/2
8/4
18/33
Single/dual/multiple-loop solar control unit
Temperature inputs
3
5
11
Flow rate and pressure measurement inputs
-
2
4
Pulse counter input
-
1
1
Relay/triac outputs
2/-
1/2
6/4
Triac/PWM speed controller
-
2/2
4/4
Floating output (closing contact)
-
-
1
Additional functions (secondary heat source, ...)
×
×
×
Function blocks (thermostat, difference, plate heat exchanger, timer)
-
-
9
Heater circuit modules
-
-
2
SD datalog
-
×
×
-
2
4
-
×
×
Standard/advanced protection functions
×/-
-/×
-/×
Languages for menu/instructions
-/11
8/11
8/11
Digital interface for expansion module
Ordered separately
Sensor pocket for Pt 1000
×
×
×
TiSUN SD datalog kit
-
×
×
External temperature sensor for heater circuit
-
-
×
Remote control for heater circuit
-
-
×
38
CONTROL UNIT ACCESSORIES
SD Datalog Kit
Accessories for Duplex Basic and Multiplex Advanced solar control units, consisting of Datalog software, SD card and
USB adapter. Permanent long-term logging of all operation data on SD card. Bi-directional transfer of system parameters
(PC > Duplex/Multiplex > PC). Representation of diagrams, temperatures, pump status, operating time, output and energy
yield. System configuration, system monitoring, heat quantity metering and energy balance.
Type
DS-SD
Item No.
1510327
Price
Designation
353,–
Datalog software, SD card and USB adapter
Polysun Light Version
Simulation software for determining the yield of thermal solar systems. Contains over 20 TiSUN hydraulic models and all
TiSUN collectors and tanks as freely selectable catalogue entries. Ideal for planning new systems or for checking existing
systems, as well as supplementing an application for funding by providing an informative report.
Type
PSLL
Item No.
1510382
Price
Designation
436,–
Polysun Light Version
Temperature sensor for collector and tank
Temperature sensor Pt 1000 (order sensor pocket separately)
Type
Item No.
Designation
Temperature range
Price
KFS 15
1510087
Collector sensor with 1.5 m silicon cable (red/black), ø = 6 mm
-50 to +180 °C
29,–
KFS 50
1510089
Collector sensor with 5 m silicon cable (red/black), ø = 6 mm
-50 to +180 °C
36,–
KFS 250
1510441
Collector sensor with 25 m cable in protective tubing (black), ø = 6 mm
-50 to +180 °C
162,–
SFK 30
1510088
Tank sensor with 3 m plastic cable (grey), ø = 6 mm
-5 to +105 °C
28,–
Surge protection for collector sensor
Surge protection against indirect lightning strikes and other voltages originating outside the system.
USK
Item No.
1510090
Designation
Surge protection with housing
Price
50,–
Surge protection with collector sensor and installation set
Surge protection against indirect lightning strikes and other voltages originating outside the system.
Type
USKM 250
Item No.
1510326
Designation
Surge protection with collector sensor, housing and installation set, 25 m
Price
190,–
Ambient temperature sensor for Multiplex heating circuit
Ambient temperature sensor Pt 1000 with protective casing for Multiplex heating circuit control unit.
Type
AFK 30
Item No.
1510439
Designation
Ambient temperature sensor with 3 m plastic cable (grey),
Temperature range from -25 °C to +50 °C, ø = 6 mm
Price
64,–
Remote control for Multiplex heater circuit
The remote control unit for connection to the Multiplex Advanced allows convenient adjustment of the heating circuit flow
temperature (heating curve) from the living room.
Type
FHM
Item No.
1510438
Designation
Remote control unit for forward flow temperature regulation
Price
60,–
20 A power relay
The power relay is specially designed for the TiSUN solar controllers and is used to connect powerful pumps or valves
to the outputs of the Simplex, Duplex and Multiplex (for Triac outputs from 0.8 A and relay outputs from 1.8 A). The power
relay is suitable for installation into control cabinets or small distribution boxes (for 1 and 3 phase systems).
Type
LR20 3S
Item No.
1510433
Designation
Power relay 20 A / 250 V AC, 3 closers, 1 opener
Price
107,–
Electronic power relay with speed control
Specially for large-scale TiSUN SG-GM / EM 100 solar stations. In conjunction with the Duplex and Multiplex solar controller, powerful solar and heating pumps rated from 0.8 A to 6 A can be speed-regulated using the PWM signal. Thyristor
power controller for phase control, single-phase 230 V/max. 6 A, including housing.
Type
ELD 6
Item No.
1510440
Designation
Electronic power relay with speed control
Price
796,–
39
Solar components
Type
SOLAR STATIONS
Specifications for solar stations
SFE25
SFRE25
SBV22
SF25
SEF25
SF50
SEF50
×/-
×/-
-
-/×
×/-
-/×
×/-
Single/dual-line solar station
Solar station expansion module
-
-
×
-
×
-
×
Simplex/Duplex solar control unit
-
×/-
-
-
-
-
-
×
Combination options
×
×
Grundfos Solar 15-60 pump
×
×
-
×
×
-
-
-
-
-
-
-
×
×
-
-
-
-
-
-
-
Grundfos Solar PM 15-85 pump
-
-
-
-
-
-
-
Safety group, 10 bar
×
×
-
×
-
×
-
Multi-function isolation valve
1
1
1
2
1
2
1
Integrated air separator
-
-
-
×
-
×
-
Filling and flushing connectors
×
×
-
×
×
×
×
Line regulator valve (flowmeter)
×
×
-
×
×
×
×
Flow rate/temperature sensor
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wall/tank mount
×
×
-
×
×
×
×
×/-
×/-
×/-
×/-
×/-
×/-
×/-
22/28 mm connectors
Flowmeter
Gravity brake for solar flow
Gravity brake suitable for single-line solar stations
SFE 25 and SFRE 25
Solar station with flow meter (Single channel)
Type
SFE 25
SFRE 25
Item No.
1510412
1510411
Item No.
Connection
22 mm
22 mm
Connection
22 mm
Designation
Solar station with pump
15 – 60, max. 25 m2 collector
area (order controller
separately)
15 – 60 and solar controller
Simplex Basic, max. 25 m2
collector area
Designation
Gravity brake for solar forward flow
371,–
545,–
Price
SBV 22
Type
1510414
Price
54,–
NEW
F
Flowmeter
Solar stations with flow meter (2-line)
SF 25
SF 50
1510306
1510307
Connection
22 mm
22 mm
Designation
15 – 60, max. 25m2 collector area (order controller
separately)
15 – 70, max. 50m2
collector area (order
controller separately)
503,–
593,–
Type
Item No.
Price
40
Solar station expansion modules for SF
Type
SEF 25
SEF 50
Item No.
1510422
1510423
SF 25
SF 50
Solar station expansion
module with pump 15 – 60,
max. 25 m2 collector area
Solar station expansion
module with pump 15 – 70,
max. 50 m2 collector area
420,–
432,–
For solar station
Designation
Price
SOLAR STATIONS
Specifications for solar stations
Single/dual-line solar station
Solar station expansion module
Simplex/Duplex solar control unit
SSR25
SES25
SSR50
SES50
SSR100
SES100
SSRH50
SESH50
-/×
×/-
-/×
×/-
-/×
×/-
-/×
×/-
-
×
-
×
-
×
-
×
-/×
-
-/×
-
-/×
-
-/×
-
-
-
-
-
×
Combination options
×
×
×
×
×
-
-
-
-
×
×
-
-
-
-
-
-
-
-
×
×
-
-
Grundfos Solar PM 15-85 pump
-
-
-
-
-
-
×
×
Safety group, 10 bar
×
-
×
-
×
-
×
-
Multi-function isolation valve
2
1
2
1
2
1
2
1
Integrated air separator
×
-
×
-
×
-
×
-
Filling and flushing connectors
×
×
×
×
×
×
×
×
Line regulator valve (flowmeter)
-
-
-
-
-
-
-
-
Flow rate/temperature sensor
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
Wall/tank mount
×
×
×
×
×
×
×
×
×/-
×/-
×/-
×/-
-/×
-/×
×/-
×/-
22/28 mm connectors
tq
with hea
uantity m
etering
Solar stations with sensor and control unit
Type
Item No.
Connection
Designation
Price
SSR 25
SSR 50
1510309
1510310
22 mm
22 mm
SSR 100
969,–
SES 100
Type
SES 25
SES 50
1510311
Item No.
1510425
1510426
1510427
28 mm
For solar station
SSR 25
SSR 50
SSR 100
(not illustrated)
Solar station with
Solar station with
Solar station with
pump 15 – 70 and
pump 15 – 120 and
pump 15 – 60 and
solar controller
solar controller
solar controller
Duplex Basic, max. Duplex Basic, max. Duplex Basic, max.
25 m2 collector area 50 m2 collector area 100 m2 collector area
915,–
Solar station expansion modules for SSR
1.298,–
Designation
Price
(not illustrated)
Solar station expan- Solar station expan- Solar station expansion module with
sion module with
sion module with
pump 25 – 120 and
pump 15 – 70 and
pump 15 – 60 and
VFS sensor, max.
VFS sensor, max.
VFS sensor, max.
100 m²
50 m²
25 m²
485,–
503,–
939,–
-efficiency
with high
p
metering
ving pum
a
-s
y
t quantity
rg
ene
with hea
VFS flow rate and
temperature sensor
Solar stations with sensor, control unit and highefficiency pump A
SSRH 50
Type
1510313
Item No.
Connection
22 mm
Designation
Solar station with high-efficiency pump PM 15 – 85 and solar
controller Duplex Basic, max. 50 m2 collector area
Price
1.310,–
Solar station expansion modules for SSRH
Type
SESH 50
Item No.
1510428
For solar station
SSRH 50
Designation
Price
Solar station expansion module with high-efficiency pump
PM 15 – 85 and VFS sensor, max. 50 m²
856,–
41
Solar components
VFS flow rate and
temperature sensor
SOLAR STATIONS
Solar stations for large systems, 100 m2 to 400 m2, modular
Cascadable solar stations for large systems in ready-to-install modular design, from 100 m² to 400 m², consisting of basic module SG-GM 100 and
expansion modules SG-EM 100. The modules are preassembled, insulated and premounted on 2“ pipe manifolds.
Type
Item No.
Designation
Price
SG-GM 100
1510429
For 100 m²
Basic module with Wilo Top-S 30/10 (order solar controller separately)
1.663,–
SG-EM 100
1510430
For each additional 100 m²
Expansion module with Wilo Top-S 30/10
1.424,–
NEW
Gravity brake for solar flow
Gravity brake suitable for SG-GM 100, solar station for large-scale systems.
Type
SBV 2
Item No.
1510476
Connection
Designation
2“
Gravity brake for SG-GM 100
Price
248,–
Sensor module for large systems (flow, pressure, temperature)
2“ sensor module for measuring flow, pressure and temperature, for system monitoring and heat quantity metering.
Type
SM-DDT
42
Item No.
1510431
Connection
Designation
AG 2“
Flow, pressure and temperature sensor module
Price
1.167,–
SOLAR STATION ACCESSORIES
Flow sensors for TiSUN® solar control units (heat quantity meters)
Flow sensor without moving parts and with integrated temperature measurement for liquid media, complete with flow measuring
section and brass fittings. Suitable for heat quantity metering in combination with TiSUN® Duplex/Multiplex solar control unit.
Type
Item No.
Flow measuring range
Connection
Price
VFS 2-40 QT
1510335
2 – 40 l/min
AG G 3/4“
282,–
VFS 5-100
1510336
5 – 100 l/min
AG R 3/4“
305,–
VFS 10-200
1510337
10 – 200 l/min
AG R 1“
485,–
Pressure sensor for TiSUN® solar controllers
The RPS pressure sensor is a combination of pressure and temperature sensor suitable for liquid media. Robustness through corrosion-resistant coating on the sensor. For use in combination with TiSUN® Duplex/Multiplex solar control unit.
Type
Item No.
RPS 0-10
1510482
Pressure measurement range
Connection
0 – 10 bar
AG G 1/2“
Price
104,–
Solar expansion vessel
Cylindrical expansion vessel, with membrane up to max. temperature +99 °C.
Item No.
SAG 18R
1510040
Coll. surface area
Volume
Connection
Price
18 l
G 3/4“
72,–
2
2
Up to 6 m
SAG 25R
1510041
Up to 10 m
25 l
G 3/4“
93,–
SAG 33R
1510042
Up to 15 m2
33 l
G 3/4“
119,–
SAG 50R*
1510334
Up to 20 m2
50 l
G 3/4“
252,–
1510044
2
80 l
R 1“
258,–
2
SAG 80R*
Up to 30 m
SAG 100R*
1510045
Up to 40 m
100 l
R 1“
317,–
SAG 140R*
1510046
Up to 50 m2
140 l
R 1“
503,–
SAG 200R*
1510047
Up to 70 m2
200 l
R 1“
527,–
2
300 l
R 1“
676,–
2
500 l
R 1“
1.131,–
SAG 300R*
SAG 500R*
1510049
1510051
Up to 125 m
Up to 200 m
* Standing tank version
!
Technical tip: Solar tanks are supplied with approx. 5 bar initial pressure and must be adjusted to suit the system.
Connection set for solar expansion vessel
Corrugated stainless steel pipe including threaded connections and quick coupling, up to 33 l including wall mount
Type
Item No.
Price
Designation
AS-SAG 34
1510315
Connecting set 3/4“, 0.5 m for expansion tanks to 33 L, DN 15 (including wall mount)
AS-SAG 34 2m H
1510494
3/4“ connection set, 2 m long, for expansion tanks up to 33 L, DN 15 (including wall mount)
AS-SAG 34 2m
1510341
AS-SAG 1
1510316
3/4“ connection set, 2 m long, for expansion vessels
from 50 l, DN 15
1“ connection set, 2 m long, for expansion vessels
from 80 l, DN 20
50,–
126,–
79,–
91,–
Insulation shell, top and bottom, for solar station on the tank
Insulation shell for covering and insulation of the connection piping of the solar station on the tank.
Suitable for solar station SF 25/50, SSR 25/50, SSRH 50 and tank FS/1R.
Type
IS-U/O
Item No.
1510321
Suitable for piping
Designation
DN 20, 22 mm, 28 mm
Insulation shell, top/bottom for 25 and 50 m² solar station
Price
84,–
Connection set for solar stations and tank
To connect the SFE 25, SFRE 25, SF 25/50, SSR 25/50 or SSRH 50 solar stations to the FS1R and BESSP-2R tanks.
Type
AS-SSR 25
Item No.
Connection
Designation
1510317
1“/22 mm
Tank connection set
Price
108,–
43
Solar components
Type
CHARGING STATIONS AND HEAT DUMPS
Fresh water station for large scale systems
Fresh water station especially for hygienic domestic hot water preparation in large scale systems with circulation pump and
pre-mixing valve integrated as standard (prevention of thermal-related calcination).
Type
NEW
Item No.
Max. tap output
Designation
Price
FWSG 150
1510495
40°C - 150 l/min
55°C - 100 l/min
Fresh water station for large scale systems with limescale protection,
circulation pump and controller
14.088,–
FWSG 225
1510496
40°C - 225 l/min
55°C - 150 l/min
Fresh water station for large scale systems with limescale protection,
circulation pump and controller
15.813,–
Anti-stagnation unit with 3-way motor switch valve
Ready-to-install anti-stagnation unit for collector areas up to 150 m2, comprising solar liquid cooler, electric fan and 3-way valve.
Type
Item No.
ASE 150
1510418
Designation
Price
150 m²
Anti-stagnation unit for collector areas up to 150 m2, cascadable, 3 x 400 V
5.664,–
! Note: This system is mainly used in southern countries with intense solar radiation.
Swimming pool charging station (suitable for use with saltwater)
S
Ready-to-install swimming pool charging station comprising stainless-steel plate heat exchanger; on the solar system side,
2 connectors with isolation valves, 2 sensor pockets for pump control and overheating protection for the plastic swimming
pool pipes; on the swimming pool side, two stainless-steel connectors with isolation valves.
Type
T
Item No.
Price
Designation
SBL 20
1510419
Up to 20 m² collector surface area
2.327,–
SBL 50
1510420
2.781,–
SBL 100
1510421
3.618,–
Tank pump unit
The universal secondary pump group is used for tank charging and consists of Grundfos circulation pump, thermometer (integrated in multifunctional isolation valve), ball valve, flat seals and EPP heat insulation jacket.
Type
44
Item No.
Connection
Designation
Price
SLE 40
1510330
1“ IG
SLE DN 25 with pump UPS 25– 40
282,–
SLE 60
1510331
1“ IG
SLE DN 25 with pump UPS 25– 60
294,–
SOLAR ACCESSORIES
3-way diverter valve with 230 V motor for heating and solar system
Type
Item No.
Price
Connection
3WW 34
1510241
IG 3/4“
148,–
3WW 1
1510242
IG 1“
152,–
3WW 54
1510243
IG 5/4“
172,–
3-way diverter valve with 230 V motor for large scale systems (heating and solar system)
Type
Item No.
Price
Connection
3WW 64
1510436
IG 6/4“
401,–
3WW 2
1510437
IG 2“
437,–
Domestic hot water mixing valve
Scald protection and constant-temperature domestic hot water tapping, suitable for up to max. 8 households,
temperature range 30-65 °C, flow at 3 bar max. 63 l/min
Type
Item No.
Price
Connection
BMV 34
1510328
Male thread 1“ with reduction threaded connection 3/4“
BMV 1 N E W
1510480
1“ male thread with 1“ screw connection
84,–
133,–
Vent with Autoclose
Automatic air separator with Autoclose system. Installation is possible near collector (only horizontally). Vent automatically
closes at 90 ºC and above. Max temperature up to 180 ºC, pressure 10 bar max.
Item No.
EA
1510417
Price
Connection
Designation
IG 1/2“
Deaerator with Autoclose
206,–
Microbubble separator with Autoclose
Automatic microbubble separator with Autoclose system. Installation is possible near collector (only horizontally). Vent automatically closes at 90 ºC and above. Max temperature up to 180 ºC, pressure 10 bar max. Included in the delivery are 2 x compression fittings (22 mm), 2 x support sleeves for 22 mm copper pipes and 1 x sealing cap.
Type
KE-HA
KE-HA-V
Item No.
Connection
1510468
1510492
Price
Designation
22 mm
282,–
18 mm
(including 2 x 22/18 mm reduction screw joints)
271,–
Line regulator valve
High-temperature bypass Taco setter for regulating and shutting off collector arrays of different sizes.
Type
Item No.
Connection
Measuring range
kvs (m³/h)
Price
TCS 2-12l
1510296
IG 3/4“
2-12 l/min
2,2
207,–
TCS 8-30l
1510297
IG 3/4“
8-30 l/min
5,0
207,–
TCS 10-40l
1510298
IG 1“
10-40 l/min
8,1
222,–
TCS 20-70l
1510299
IG 1 1/4“
20-70 l/min
17,0
264,–
Filling and flushing pump
The pump allows quick and clean fillling and flushing of solar systems with heat transfer fluid. The compact unit consists of
trolley, 50 l container, pump and hoses; max. fluid temperature +60 °C.
Type
Item No.
Application
Price
FP-S 50
1510164
Up to 50 l/min
966,–
FP-S 70
1510165
Up to 70 l/min
1.265,–
45
Solar components
Type
SOLAR ACCESSORIES
Antifreeze and heat transfer fluid
The antifreeze prevents frost damage in the solar system while at the same protecting against corrosion. The
fluid is biodegradable, food safe and does not corrode the standard seals used in heating systems. It is ASTM
tested and complies with ÖNORM (Austria), AFSSA (France) and KIWA-ATA (Netherlands).
Type
Item No.
Designation
Packaging
Cold protection
Price/l
Mixing table
able
Concentrate
50%
45%
40%
50%
55%
60%
-38°C
-30°C
-24°C
FWF-K 5
1510415
Concentrate
5l
Acc. to table
9,27
Water
FWF-K 11
1510416
Concentrate
11 l
Acc. to table
8,79
Cold protection
FWF-K 24
1510053
Concentrate
24 l
Acc. to table
8,07
FWF-F
1510054
Ready-mixed to -25 °C
24 l
Up to -25 °C
4,96
Designation
Packaging
Cold protection
Ready-mixed
24 l
Evaporation-proof frost protection
For collectors with high thermal load due to stagnation
Type
Item No.
FWF-VSF
1510055
Up to -28°C
Price/l
!
Note: FWF-VSF must not be mixed with
other heat transfer fluids or water!
7,24
Installation wrenches for collector connections
Two different installation wrenches are available in the set and include the wrench combinations for all compression fittings in the basic
connection and expansion sets for module and large collectors (wrench sizes engraved).
Type
MS/AB WZST
Item No.
1410319
Designation
Wrench sizes
Installation wrench, tool
steel (DIN 1.2241 or approx.
BD2) hardened and nickelplated (6 mm)
Installation wrench A (24, 27, 30 and 21, 25, 29)
Installation wrench B (13, 24, 32 and 21, 25, 27)
Price
101,–
Transport device for module collector
The clamping device for FM collectors can be used as an aid for transportation and installation.
One set required for crane transport, 2 sets for transport by hand.
Type
TRV-FM
Item No.
1410219
Price
Collector
FM transport device set (2 pieces)
432,–
Solar check case
The solar case is used for start-up and annual checks of solar systems. It contains test and information labels, a refractometer for
measuring the concentration of the frost protection, pH measuring strips, inclinometer, compass, pressure gauge and an acceptance
protocol.
Type
Item No.
SC
1510063
Designation
Contents
Price/unit
363,–
Reorder Components
46
SC-pH
1510068
pH measuring strips
84 strips
23,–
SC-PP
1510069
Test label
12 pieces
18,–
SC-HP
1510071
Information label
12 pieces
17,–
SC-RM
1510070
Refractometer
1 piece
190,–
PIPING
Double spiral pipe connection and piping set for large collectors
The set is used as a connection between collector and solar station and replaces the HAS-11 to HAS-44 hydraulic connection
sets. Temperature range: max. +175 °C, fire resistance class B2, UV-stable.
For large collectors
Set consists of: double spiral pipe, sensor cable, screw connection for large collector and solar station, sensor pocket, dummy plug, mounting clamps and installation instructions for large collectors
Type
Item No.
Spiral piping
Length
Collector connection
for solar station
Price
AVS 15/22S
1530008
DN15
15 m
GFK - 22 mm
SF 25/50, SSR 25/50, SSRH 25/50
800,–
AVS 20/22S
1530006
DN20
20 m
GFK - 22 mm
SF 25/50, SSR 25/50, SSRH 25/50
1.145,–
AVS 25/22S
1530007
DN25
20 m
GFK - 22 mm
SF 25/50, SSR 25/50, SSRH 25/50
1.490,–
Line regulator valve with screw connection for spiral pipe
High-temperature bypass Taco setter with screw connection for regulating and shutting off collector arrays of different sizes.
For FM module collector and FA/FI large collectors
Set consists of: two line regulator valves and four adapters to spiral pipe
Type
Item No.
Spiral piping
Valve
Price
REG 20 2-12l
1520016
DN20
TCS 2 – 12 l/min
473,–
REG 25 10-40l
1520018
DN25
TCS 10 – 40 l/min
501,–
!
Note: Install regulation set as far away as possible from the collector and protected from exposure to UV and weather conditions.
Consisting of: stainless steel double spiral piping, insulated with PE protective film (removable), with sensor cable, including threaded connection parts for collector connection and solar station with attachment clamps, max. +175 °C, fire resistance class B2, UV-stable.
For FM module collector
Type
Item No.
Designation
Pipe
Length
for solar station
Price
SVS 15/18S
1510339
DN 15
Cu 18
15 m
SF 25/50, SSR 25/50, SSRH 25/50
736,–
SVS 20/18S
1510340
DN 20
Cu 18
20 m
SF 25/50, SSR 25/50, SSRH 25/50
1.167,–
Double spiral piping (50 m) including insulation
Consisting of: stainless steel double spiral piping, insulated with PE protective film (removable), including sensor cable,
max. +175 °C, fire resistance class B2, UV-stable.
Type
Price
Item No.
Length
Designation
W 15
1510143
50 m
DN 15
2.174,–
W 20
1510144
50 m
DN 20
2.335,–
W 25
1510145
50 m
DN 25
3.048,–
Double piping clamp
Oval clamp for attachment of double spiral piping (including screws and wall plugs).
Ova
Type
Item No.
Designation
S1
15
1510156
DN 15
S 20
2
1510157
DN 20 and DN 25
Price
9,57
11,–
47
Solar components
Double spiral piping set for module collector
PIPING
Female-thread adapter
Female-thread adapter on spiral pipe (including graphite seal up to +450 °C)
Type
Item No.
Designation
Price
1510121
DN 15-3/4“ IG
15,–
1510463
DN 15-1“ IG
18,–
1510122
DN 20-3/4“ IG
22,–
1510464
DN 20-1“ IG
29,–
UI 25/34
1510124
DN 25-3/4“ IG
30,–
UI 25/1
1510123
DN 25-1“ IG
33,–
UI 15/34
UI 15/1
NEW
UI 20/34
UI 20/1
NEW
Male-thread adapter
Male-thread adapter on spiral pipe (including graphite seal up to +450 °C)
Type
Item No.
Designation
Price
UA 15/34
1510125
DN 15-3/4“ AG
15,–
UA 20/34
1510126
DN 20-3/4“ AG
20,–
UA 25/34
1510128
DN 25-3/4“ AG
34,–
T-piece
T-piece for spiral pipe (including graphite seal up to +450 °C)
Type
Item No.
Designation
Price
T 15
1510129
DN 15
44,–
T 20
1510130
DN 20
63,–
T 25
1510131
DN 25
94,–
Coupling
Coupling for spiral pipe (including graphite seal up to +450 °C)
Type
Item No.
Designation
Price
K 15
1510132
DN 15
21,–
K 20
1510133
DN 20
32,–
K 25
1510134
DN 25
42,–
Adapter to cutting ring
For compression fitting including seal.
Type
Item No.
Designation
Price
KL 15/18
1510135
DN 15 / 18 mm
18,–
KL 15/22
1510139
DN 15 / 22 mm
20,–
KL 20/18
1510138
DN 20 / 18 mm
24,–
KL 20/22
1510136
DN 20 / 22 mm
27,–
KL 25/28
1510137
DN 25 / 28 mm
33,–
Adapter to solar station
For compression fitting including seal.
Type
48
Item No.
Designation
Price
US 20/22
1510161
DN 20 / 22 mm
29,–
US 25/28
1510305
DN 25 / 28 mm
45,–
US 15/22
1510343
DN 15 / 22 mm
17,–
PIPING
Transition angle from spiral pipe to compression fitting for FA, FI, large collectors
Consisting of: 90° transition angle from spiral pipe to collector (compression fitting) and graphite seal.
Type
Item No.
Spiral pipe
Collector connection
Price
KLW 15/22
1510168
DN15
GFK – 22 mm
24,–
KLW 20/22
1510169
DN20
GFK – 22 mm
34,–
KLW 25/22
1510170
DN25
GFK – 22 mm
47,–
Replacement conical seal
Graphite seal up to +450 °C
Type
Item No.
Price
Spiral pipe
E 15
1510140
DN 15
6,94
E 20
1510141
DN 20
11,–
E 25
1510142
DN 25
12,–
Reduction for 25/50 m2 solar stations with 22 mm connections
Connection set consisting of 4 pieces of compression fitting reductions (22 mm/28 mm) with support sleeves for 28 mm copper
pipe.
US 22S/28S
Item No.
1510342
Connection
Designation
22 mm, 28 mm
Reduction threaded connection 22/28
Price
95,–
Threaded connection reduction adapter
Compression fitting adapter for copper pipes (including support sleeves)
Type
Item No.
Price
Connection
KRV 18/22
1510444
18 mm, 22 mm
11,–
KRV 15/18
1510443
15 mm, 18 mm
9,87
Compression fitting coupling
Cutting ring coupling for copper pipes (including support sleeves)
Type
Item No.
Price
Connection
KRV 18/18
1510478
18 mm, 18 mm
12,–
KRV 22/22
1510479
22 mm, 22 mm
14,–
Silicone sealing band
For sealing transition from spiral/corrugated pipe to insulation. Temperature resistance from -50 °C to +260 °C, self-sealing,
flexible and UV-resistant.
Type
SDB 40
Item No.
1510333
Price
Unit
27,–
40 x 2000 mm
Pipe collar for roof insertion
The weather-resistant, easy-to-install pipe collar with seal can be used for feeding insulated solar piping through the roof. The
scope of delivery includes Bulb-tite rivets for corrugated cement asbestos and drilling screws for installation on all sheet metal
roofs, PLUS sealing compound in a practical application cartridge and installation instructions.
Type
DD-RM
Item No.
Dimensions
Designation
1410230
Ø 20-70 mm
Roof insertion set for insulated solar piping
Price
114,–
49
Solar components
Type
NEW
PLUS
®
PRO-CLEAN
STRATIFIED
TANK
SCHICHTSPEICHER
PRO-CLEAN
PC 2WR
Pro-CleanPLUS stratified tank for domestic hot water and heating
Multi-functional energy tank with integrated stratified charging system made of S 235
JR steel for domestic hot water and heating. Integrated hygienic water heating using a
continuous heating process with corrugated stainless-steel pipe (1.4404). Inflow absorbers
ensure optimum retention of stratification. Combining with the SLRH solar station enables
highly efficient stratified charging and effective usage of the solar potential. Expandable
with PS backup tank (see page 56).
Pro-CleanPLUS technical data
General data: Max. tank operating pressure: 3 bar/Max. domestic hot water
corrugated pipe operating pressure: 6 bar/Max. temp. 110 °C.
Type
PCp 500
PCp 800
PCp 1000S
520
760
980
400
600
810
1–2
1–4
1–5
PCp 500
PCp 800
PCp 1000S
1610700
1610717
1610718
1.860 mm
2.010 mm
2.220 mm
Ø with insulation3
850 mm
950 mm
990 mm
Ø without insulation3
650 mm
750 mm
790 mm
1.820 mm
1.975 mm
2.185 mm
170 kg
205 kg
235 kg
Tank volume in l
Single discharge capacity
2
Application range (hot water)1 No. of h.
Pro-CleanPLUS stratified tank
Type
Item No,
3
Total height with insulation
Tilt height3
Weight
Price
2.111,–
2.341,–
2.433,–
1)
Figures quoted are based on standard consumption values. Specific calculations are made for extreme consumption e.g. in
swimming pools, saunas etc.
² Number of households (3 occupants/household). Applicable only without secondary circulation.
3)
All size specifications are in a tolerance range of +/- 3%.
)
Polyester fibre fleece insulation for Pro-CleanPLUS stratified tank
Three-part polyester fibre fleece insulation, 100 mm; with textured grey polystyrene outer
shell (RAL9022); adjustable clip locking rails, including lid and base insulation. Guaranteed
best thermal properties, insulation fire resistance class B1, CFC-free and 100% recyclable.
ISOVS PCp ISOVS PCp
500
800
Type
Item No,
ISOVS PCp
1000S
1610702
1610719
1610720
662,–
880,–
972,–
Price
Solar charging station for Pro-CleanPLUS
Solar transfer station specially tailored to Pro CleanPLUS for tank mounting. Comprising plate
heat exchanger, TiSUN Duplex Basic control unit and 2 high efficiency pumps. Integrated
energy balancing and data logger option. The assembly is fitted with all the necessary
piping and is pre-insulated. A cover jacket and the connector piping to the Pro CleanPLUS are
also included in the delivery.
Type
Item No,
collector surface area
Designation
with hea
t quantity
metering
ing pump
ergy-sav
fficiency en
Price
SLRH 20
SLRH 60
1620063
1620064
20 m²
60 m²
Solar charging module with
control unit and high efficiency
pumps for stratified charging of
the PCp
Solar charging module with
control unit and high efficiency
pumps for stratified charging of
the PCp
2.996,–
3.278,–
with high-e
50
PC PRO-CLEAN® STRATIFIED TANK
Pro-Clean® stratified tank with spherical exchanger for domestic
hot water and heating
Multi-functional stratified tank system (only in combination with spherical exchanger) made
of S 235 JR steel (stainless steel 1.4404) for domestic hot water and heating. Backup tank with
optimum stratified charging without tank mixing with integrated hygienic water heating using
a continuous heating process with stainless-steel corrugated pipe and inflow absorbers for
optimum retention of stratification (including dummy flange plate, from 1500 L). Expandable
with PS backup tank (see page 56).
Pro-Clean® technical data
General data: Max. tank operating pressure: 3 bar/Max. domestic hot water corrugated pipe operating pressure: 6 bar/Max. temp. 110 °C.
PC 500
PC 800
Tank volume
in l
520
760
980
980
Single discharge capacity
Area of use
(hot water)1
NA²
400
600
810
1–2
1–4
1–5
Type
PC 1000B PC 1000S PC 1250
PC 1500
PC 2000
PC 2500
PC 3000
PC 4000
PC 5000
1.250
1.490
1.930
2.430
2.910
3.920
4.950
810
1.050
1.290
1.710
2.150
2.610
3.560
4.475
1–5
1–5
1–6
1–7
1–9
1 – 11
1 – 12
1 – 14
Pro-Clean® stratified tank with spherical exchanger connection
PC 800
Item No,
1610114
1610115
1610116
1610118
Total height
with insulation1
PC 1000B PC 1000S PC 1250
PC 1500
PC 2000
PC 2500 PC 3000* PC 4000* PC 5000*
1610119
1610120
1610121
1610122
1610123
1610124
1610125
1.860 mm
2.010 mm
2.050 mm
2.220 mm
2.300 mm
2.290 mm
2.380 mm
2.270 mm
2.770 mm
2.400 mm
2.910 mm
Ø with
insulation1
850 mm
950 mm
1.050 mm
990 mm
1.100 mm
1.200 mm
1.300 mm
1.500 mm
1.470 mm
1.820 mm
1.820 mm
Ø without
insulation1
650 mm
750 mm
850 mm
790 mm
900 mm
1.000 mm
1.100 mm
1.300 mm
1.250 mm
1.600 mm
1.600 mm
Tilt height1
1.820 mm
1.975 mm
2.020 mm
2.185 mm
2.270 mm
2.280 mm
2.380 mm
2.350 mm
2.780 mm
2.520 mm
3.020 mm
178 kg
210 kg
240 kg
235 kg
276 kg
303 kg
360 kg
448 kg
458 kg
550 kg
630 kg
2.159,–
2.410,–
2.571,–
2.559,–
3.100,–
3.732,–
4.595,–
4.917,–
5.308,–
7.349,–
8.039,–
Weight
Price
!
Note: Accessories insulation, spherical exchanger and dummy flange plate can be found on the following pages, other accessories on page 58.
1)
Figures quoted are based on standard consumption values. Specific calculations are made for extreme consumption e.g. in swimming pools, saunas etc.
²) Number of households (3 occupants/household). Applicable only without circulation.
3)
Polyester fibre fleece insulation for Pro-Clean® stratified tanks
Three-part polyester fibre fleece insulation, 100 mm; with textured grey polystyrene outer shell (RAL 9022);
adjustable clip locking rails, including lid and base insulation, EPS sealing plugs.
Best heat insulation properties guaranteed, insulation fire resistance class B1, CFC-free and 100% recyclable.
ISOVSPCH
500
ISOVSPCH
800
ISOVSPCH
1000B
ISOVSPCH
1000S
ISOVSPCH
1250
ISOVSPCH
1500
ISOVSPCH
2000
ISOVSPCH
2500
ISOVSPCH
3000*
ISOVSPCH
4000*
ISOVSPCH
5000*
Item No,
1610535
1610536
1610537
1610538
1610539
1610540
1610541
1610542
1610543
1610544
1610545
Price
604,–
823,–
941,–
945,–
1.125,–
1.268,–
1.394,–
1.585,–
1.890,–
2.028,–
3.104,–
Type
!
* Not held in stock (lead time approx. 6 to 8 weeks), thickness of insulation 110 mm
51
Pro-Clean®
PC 500
Solar stratified tank
Type
®
®
PC
2WR PRO-CLEANPRO-CLEAN
STRATIFIED
TANK
SCHICHTSPEICHER
PC
2WR
Pro-Clean® stratified tank with spherical exchanger connector
and 2 corrugated pipes
Multi-functional stratified tank system (only in combination with spherical exchanger)
made of S 235 JR steel (stainless steel 1.4404) for domestic hot water and heating. Backup
tank with optimum stratified charging without tank mixing with integrated hygienic water
heating using a continuous heating process with stainless-steel corrugated pipe and inflow
absorbers for optimum retention of stratification (including dummy flange plate, from 1500 L).
Expandable with PS backup tank (see page 56).
Pro-Clean® stratified tank with spherical exchanger connection and 2 corrugated pipes*
PC 2WR 1250
Type
N E W 1610701
Item No.
PC 2WR 1500
PC 2WR 2000
PC 2WR 2500
PC 2WR 3000
PC 2WR 4000
PC 2WR 5000
1610438
1610439
1610440
1610443
1610444
1610445
Total height with
insulation1
2300 mm
2290 mm
2380 mm
2270 mm
2770 mm
2400 mm
2910 mm
Ø with insulation1
1100 mm
1200 mm
1300 mm
1500 mm
1470 mm
1820 mm
1820 mm
Ø without
insulation1
900 mm
1000 mm
1100 mm
1300 mm
1250 mm
1600 mm
1600 mm
Tilt height1
2270 mm
2280 mm
2380 mm
2350 mm
2780 mm
2520 mm
3020 mm
303 kg
334 kg
393 kg
483 kg
493 kg
585 kg
665 kg
3.893,–
4.825,–
5.388,–
6.423,–
6.653,–
8.798,–
9.028,–
Weight
Price
Polyester fibre fleece insulation for Pro-Clean® stratified tanks with 2 corrugated pipes*
Three-part polyester fibre fleece insulation, 100 mm; with textured grey polystyrene outer shell (RAL 9022); adjustable clip locking rails, including lid and base insulation, EPS sealing plugs. Best heat insulation properties guaranteed, insulation fire resistance class B1, CFC-free
and 100% recyclable
ISOVS PC 2W 1250
Type
NEW
ISOVS PC 2W 1500
ISOVS PC 2W 2000
ISOVS PC 2W 2500
ISOVS PC 2W 3000
ISOVS PC 2W 4000
ISOVS PC 2W 5000
1610703
1610546
1610547
1610548
1610549
1610550
1610551
Insulation
thickness1
100 mm
100 mm
100 mm
100 mm
110 mm
110 mm
110 mm
Price
1.148,–
1.310,–
1.430,–
1.621,–
1.932,–
2.076,–
3.140,–
Item No.
!
52
*Not held in stock (lead time approx. 6 to 8 weeks), insulation thickness 110 mm
1)
PH PRO-HEAT STRATIFIED TANK
Pro-Heat stratified tank with spherical exchanger connector for
heating systems
Pro-Heat stratified tank with spherical exchanger for heating systems. Multi-functional
stratified tank system (only in combination with spherical exchanger) made of S 235 JR steel
for heating. Backup tank with optimum stratified charging without tank mixing and inflow
absorbers for optimum retention of the stratification (including dummy flange plate, from
1500 L). Expandable with PS backup tank (see page 56).
Pro-Heat stratified tank with spherical exchanger connection for heating systems*
Type
PH 500
PH 800
Item No.
PH 1000B PH 1000S PH 1250
PH 1500
PH 2000
PH 2500
PH 3000
PH 4000
PH 5000
1610498
1610499
1610500
1610501
1610502
1610503
1610504
1610505
1610506
1610507
1610508
Total height with
insulation1
1.860 mm
2.010 mm
2.050 mm
2.220 mm
2.300 mm
2.290 mm
2.380 mm
2.270 mm
2.770 mm
2.400 mm
2.910 mm
Ø with insulation1
850 mm
950 mm
1.050 mm
990 mm
1.100 mm
1.200 mm
1.300 mm
1.500 mm
1.470 mm
1.820 mm
1.820 mm
Ø without
insulation1
650 mm
750 mm
850 mm
790 mm
900 mm
1.000 mm
1.100 mm
1.300 mm
1.250 mm
1.600 mm
1.600 mm
Tilt height1
1.820 mm
1.975 mm
2.020 mm
2.185 mm
2.270 mm
2.280 mm
2.380 mm
2.350 mm
2.780 mm
2.520 mm
3.020 mm
100 kg
120 kg
140 kg
140 kg
170 kg
190 kg
240 kg
300 kg
365 kg
420 kg
500 kg
1.185,–
1.294,–
1.467,–
1.507,–
1.846,–
2.111,–
Weight
Price
2.548,– 3.318,– 3.928,– 5.906,–
6.889,–
Polyester fibre fleece insulation for Pro-Heat stratified tanks*
Three-part polyester fibre fleece insulation, 100 mm; with textured grey polystyrene outer shell (RAL 9022); adjustable clip locking rails,
including lid and base insulation, EPS sealing plugs. Best heat insulation properties guaranteed, insulation fire resistance class B1, CFCfree and 100% recyclable.
1610535
1610536
1610537
1610538
1610539
1610540
1610541
1610542
1610543
1610544
1610545
Insulation
thickness1
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
110 mm
110 mm
110 mm
Price
604,–
823,–
941,–
945,–
1.125,–
1.268,–
1.394,–
1.585,–
1.890,–
2.028,–
3.104,–
!
1)
53
Pro-Clean®
Item No.
Solar stratified tank
ISOVS- ISOVS- ISOVS- ISOVS- ISOVS- ISOVS- ISOVS- ISOVS- ISOVS- ISOVSISOVSPCH 500 PCH 800 PCH 1000B PCH 1000S PCH 1250 PCH 1500 PCH 2000 PCH 2500 PCH 3000 PCH 4000 PCH 5000
Type
STRATIFIED TANK
Spherical exchanger for solar stratified charging suitable for Pro-Clean® and ProHeat stratified tank
Max. spherical exchanger pressure 10 bar, max. spherical exchanger housing pressure 3 bar, max. temperature 110 °C
Type
Item No.
Collector surface
area
Insulation
Forward flow/
return connections
Price
Suitable for
ST 10
1620009
Incl. fleece insulation
Up to 10 m²
3/4" male thread
PC/PH 500-800
1.243,–
ST 20
1620010
Up to 20 m²
3/4" male thread
PC/PH 500-1500
1.454,–
ST 40
1620011
Up to 40 m²
1" male thread
PC/PH 800-2500
1.818,–
ST 60K
1620002
Without fleece insulation
Up to 60 m²
5/4" male thread
PC/PH 1000-2500
2.004,–
Up to 60 m²
5/4" male
thread*
PC/PH 3000-5000
2.065,–
1
ST 60
1620003
Without fleece insulation
Accessories
ISOVS-ST 60K
1
ISOVS-ST 60
1610562
Polyester fleece insulation for ST 60K
497,–
1610563
Polyester fleece insulation for ST 60
500,–
Note: Pro-Clean® and Pro-Heat only function as solar stratified tanks when combined with the spherical exchanger!
1)
Not held in stock (delivery time approx. 6 to 8 weeks)
!
S
Spherical
exchanger connection set for Pro-Clean®
and Pro-Heat
T spherical exchanger connection set allows easy and reliable connection of
The
tthe spherical exchanger connections to the rest of the piping.
Type
T
For spherical exchanger
STAS 34
S
1610111
ST 10 / ST 20
STAS 1
1610112
ST 40
STAS 54
1610113
ST 60K / ST 60
!
54
Item No.
Connections
R 3/4" male
thread
R 1" male
thread
R 5/4" male
thread
Price
Dummy flange
plate for spherical
al
ect
ctttions
ions
exchanger connections
Four of these are needed when
using the Pro-Clean® and ProHeat tank without spherical
exchanger!
59,–
Type
FLP-ST
81,–
Item No.
1620000
Price
12,–
160,–
Note: Other connections with tapered male thread
SOLAR FRESH WATER TANK
FS/1R solar fresh water tank
FS 375/1R
FS 500/1R
FS 800/1R
FS 1000S/1R
1610603
1610303
1610304
1610305
1.725 mm
1.860 mm
2.010 mm
2.220 mm
Ø with insulation1
710 mm
850 mm
950 mm
990 mm
550 mm
650 mm
750 mm
790 mm
Type
Item No.
1
Total height with insulation
1.495 mm
1.820 mm
1.975 mm
2.185 mm
Smooth pipe coil surface
area
1,5 m²
1,8 m²
2,2 m²
2,8 m²
Weight
142 kg
200 kg
235 kg
270 kg
Tilt height1
Price
Solar fresh water tank FS/1R for
domestic hot water and heating
2.145,–
2.267,–
2.602,–
2.745,–
Polyester fibre fleece insulation for FS/1R solar fresh water tanks
Three-part polyester fibre fleece insulation with grey polystyrene outer shell (RAL 9022),
with adjustable clip lock rails, including base and lid insulation, EPS sealing plugs, fire
resistance class B2. Guaranteed good thermal properties, CFC-free and 100% recyclable.
Fresh water tank with a smooth pipe coil at the bottom
for solar charging. Multi-functional tank system made
of S 235 JR steel for domestic hot water and heating.
Backup tank with integrated hygienic water heating
in a continuous heating process with corrugated
stainless-steel pipe (stainless steel 1.4404). Max. tank
operating pressure 3 bar, max. operating pressure of
hot domestic water corrugated pipe 6 bar, max. temperature +110 °C. Including mounting options for solar
station and solar expansion tank.
ISOVL-FS
375/1R
ISOVL-FS
500/1R
ISOVL-FS
800/1R
ISOVL-FS
1000S/1R
1610552
1610553
1610554
1610555
Insulation thickness
80 mm
100 mm
100 mm
100 mm
Price
449,–
473,–
557,–
652,–
Type
Item No.
1
FS/2R solar fresh water tank
Type
Item No.
Total height with insulation1
Ø with insulation
1
Tilt height1
Smooth pipe coil surface area
Weight
Price
Solar fresh water tank FS/2R for
domestic hot water and heating
FS 1000S/2R
1610288
1610289
2.020 mm
2.220 mm
950 mm
950 mm
750 mm
750 mm
1.975 mm
2.185 mm
2,2 + 1,5 m²
2,8 + 1,9 m²
240 kg
280 kg
2.805,–
2.973,–
Type
ISOVL-FS 800/2R
ISOVL-FS 1000S/2R
1610556
1610557
100 mm
100 mm
557,–
652,–
Item No.
1
Insulation thickness
Price
1)
All size specifications are in a tolerance range of +/- 3%
55
+ accessories
Three-part polyester fibre fleece insulation with grey polystyrene outer shell (RAL 9022),
with adjustable clip lock rails, including base and lid insulation, EPS sealing plugs, fire
resistance class B2. Guaranteed good thermal properties, CFC-free and 100% recyclable.
Solar tank
Polyester fibre fleece insulation for FS/2R solar fresh water tanks
Fresh water tank with two smooth pipe coils (top and
bottom) for solar two-layer charging. Multi-functional
tank system made of S 235 JR steel for domestic hot
water and heating. Backup tank with integrated hygienic water heating in a continuous heating process
with corrugated stainless-steel pipe (stainless steel
1.4404). Max. tank operating pressure 3 bar, max.
operating pressure of domestic hot water corrugated
pipe 6 bar, max. temperature +110 °C. The solar station
and expansion tank are mounted on the wall.
FS 800/2R
BACKUP TANK
NEW
PS backup tank
Tank manufactured to DIN 4753 Part 1, made of S 235 JR steel, rough on the inside with rustprotection on the outside. The welded seams comply with DIN 4753 Part 3. All connectors
required are provided. No insulation, max. operating pressure 3 bar, max. temperature +110 °C
Type
PS 500
PS 800
Item No.
PS 1000B PS 1000S PS 1250
PS 1500
PS 2000 PS 2500* PS 3000* PS 4000* PS 5000*
1610655
1610656
1610657
1610658
1610659
1610660
1610661
1610662
1610663
1610664
1610665
Total height with
insulation1
1.860 mm
2.010 mm
2.050 mm
2.220 mm
2.300 mm
2.290 mm
2.380 mm
2.270 mm
2.770 mm
2.400 mm
2.910 mm
Ø with insulation1
850 mm
950 mm
1.050 mm
990 mm
1.100 mm
1.200 mm
1.300 mm
1.500 mm
1.470 mm
1.820 mm
1.820 mm
Ø without
insulation1
650 mm
750 mm
850 mm
790 mm
900 mm
1.000 mm
1.100 mm
1.300 mm
1.250 mm
1.600 mm
1.600 mm
Tilt height1
1.800 mm
1.965 mm
2.020 mm
2.180 mm
2.270 mm
2.280 mm
2.380 mm
2.350 mm
2.780 mm
2.520 mm
2945 mm
130 kg
155 kg
185 kg
185 kg
215 kg
247 kg
305 kg
380 kg
415 kg
510 kg
520 kg
846,–
961,–
1.030,–
1.041,–
1.363,–
1.639,–
1.892,–
Weight
Price
2.973,– 3.192,– 5.135,–
5.578,–
Polyester fibre fleece insulation for PS backup tank
Three-part polyester fibre fleece insulation, 100 mm1; with 1.2 mm thick textured grey polystyrene outer shell (RAL9022); shell assembled with clip
locking rails, including lid and base insulation. Guaranteed best thermal properties, insulation fire resistance class B1, CFC-free and 100% recyclable.
Type
ISOVS
PS 500
ISOVS
ISOVS
ISOVS
ISOVS
PS 800 PS 1000 B PS 1000 S PS 1250
ISOVS
PS 1500
ISOVS
ISOVS
ISOVS
ISOVS
ISOVS
PS 2000 PS 2500* PS 3000* PS 4000* PS 5000*
Item No.
1610666
1610667
1610668
1610669
1610670
1610671
1610672
1610673
1610674
1610675
1610676
Insulation
thickness1
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
110 mm
110 mm
110 mm
Price
593,–
823,–
941,–
935,–
1.114,–
1.255,–
1.380,–
1.570,–
1.921,–
2.007,–
3.073,–
Inflow pipe
The universally usable inflow pipe facilitates steady stratification in the tank during heating processes.
For installation in backup tanks with Rp 6/4“ female thread. EPD-coated.
ESD 64
Type
Item No.
Thread
Installation length
Price
!
56
1610608
Rp 6/4“ - R 6/4“
400 mm
98,–
3)
HOT WATER TANK
NEW
BE-SSP-2R solar hot water tank
With two smooth pipe coils made of S 235 JR steel, enamelling to DIN 4753, including magnesium anode and opening for cleaning, up to 500 litres including hard polyurethane foam
insulation (fixed foam), from 750 litres without insulation, max. operating pressure 10 bar,
max. temperature +95 °C. Option to mount solar station and expansion container on the tank.
Type
BE-SSP-2R 200
BE-SSP-2R 300
BE-SSP-2R 400
BE-SSP-2R 500
BE-SSP-2R 750
BE-SSP-2R 1000
1610711
1610712
1610713
1610714
1610715
1610716
Total height with
insulation1
1.432 mm
1.794 mm
1.591 mm
1.921 mm
2.043 mm
2.070 mm
Ø with insulation1
540 mm
600 mm
700 mm
700 mm
950 mm
1.050 mm
–
–
–
–
750 mm
850 mm
1
1.514 mm
1.876 mm
1.712 mm
2.023 mm
2.098 mm
2.150 mm
0,6 + 1,0 m²
0,8 + 1,3 m²
0,9 + 1,7 m²
1,1 + 1,8 m²
1,2 + 1,9 m²
1,4 + 2,0 m²
75 kg
116 kg
132 kg
149 kg
221 kg
272 kg
Item No.
Tilt height
Smooth pipe coil
top + bottom
Weight
Price
1.179,–
1.501,–
1.892,–
2.088,–
2.778,–
3.330,–
Polyester fibre fleece insulation for solar hot
water tank BE-SSP-2R
Three-part polyester fibre fleece insulation with grey polystyrene
outer shell (RAL 9022), with adjustable clip lock rails, including
base and lid insulation, EPS sealing plugs, fire resistance class B2.
Guaranteed good thermal properties, CFC-free and 100% recyclable.
Type
ISOVL-BE-SSP-2R ISOVL-BE-SSP-2R
750
1000
Flange plates for tank
range
DN 110 flange plates, enamelled,
including seal
Type
Item No.
Item No.
Insulation thickness1
Price
1610709
1610710
100 mm
100 mm
512,–
570,–
Enamelled for
BE-SSP-2R tanks up
to 500 l
Price
FLPE-SSP 64
1610204
DN 110 flange plate
6/4“ sleeve for electric
heating
78,–
BE-SSPK solar hot water tank
BE-SSPK 160 HE
BE-SSPK 200 HE
1610704
1610706
1610707
1.046 mm
1.235 mm
1.300 mm
524 mm
524 mm
584 mm
10 bar
10 bar
10 bar
Wall mounting
Wall mounting
Wall mounting
Electric heater rating
2 kW
2 kW
2,2 kW
Installation type
1 m²
1 m²
1 m²
Weight
77 kg
82 kg
96 kg
Price
811,–
949,–
Item No.
Total height 1
Diameter 1
Max. operating pressure
Montageart
electric
Including
r
te
hea
1)
Solar tank
BE-SSPK 125 HE
Type
1.041,–
All size specifications are in a tolerance range of +/- 3%
57
+ accessories
The BE-SSPK hot water tank for wall mounting; with a smooth pipe coil; made of S 235 JR steel, enamelled to DIN 4753,
including magnesium anode; insulation made of hard polyurethane foam, powder-coated metal outer shell (including electric
secondary heat source).
TANK ACCESSORIES
Tank accessories – areas of use
Designation
Type
Item No.
PCp
PC
PC
2WR
PH
FS 1R
FS 2R
PS
BESSP2R
WT 5
1620012
×
×
×
×
×
ALS 1500
1610610
×
×
×
×
×
Corrugated connection pipe
PVS
1620025-28
×
×
×
×
×
×
×
Priority flap
VK 1
1630004
×
×
×
×
×
×
×
Plates/swimming pool exchanger
PWT-(SB)
1610364-75
×
×
×
×
×
×
×
×
Electric screw-in heating element
EEH
1610468-74
×
×
×
×
×
×
×
×
BSG 3/4"
1610487
×
×
×
×
×
Boiler safety centre 12 L
BSC 12
1610488
×
×
×
×
×
Boiler safety centre 18 L
BSC 18
1610489
Extension sleeve for electric heater
VM 64
1610609
×
×
×
×
×
×
Sludge separator for heater circuits
SA 64
1610604
×
×
×
×
×
×
×
Microbubble separator for heater circuits
LA 64
1610606
×
×
×
×
×
×
×
Bimetallic dial indicator thermometer
ZT 150
1610284
×
×
×
×
×
×
×
Boiler thermostat
BT 100
1610318
Boiler thermostat
BT 210
1610320
×
×
×
×
×
×
×
TH
1610068-69
×
×
×
×
×
×
×
Circulation lance
Circulation unit
Boiler safety group
Sensor pocket
BESSPKHE
×
×
×
×
×
×
×
×
×
Circulation unit with domestic hot water mixing valve and circulation pump
For mixing hot water and circulation of clean water in domestic hot water systems. Domestic hot water available immediately
(reduced water consumption). Integrated thermostatic domestic hot water mixing valve. Infinitely adjustable thermostat on the
pump for optimised switching times.
Type
ALS 1500
Item No.
1610610
Price
Discharge capacity
1.027,–
Kvs=1500 l/h
The BSG cylinder safety group provides optimum protection from exceeding pressure in unvented domestic hot water cylinders, in compliance with DIN 1988 and DIN 4753 part 1. Incl. all components that must be fitted to DHW cylinders as stipulated by DIN 1988. The safety
valve protects the downstream DHW cylinder and the return flow inhibitor prevents the heated DHW from flowing back. DVGW (German
Technical and Scientific Association for Gas and Water) tested..
Type
BSG - 3/4“
Item No.
1610487
Dimension
Connection
Safety valve
DN 20
G 3/4“
6 bar
Price
191,–
DIN 1988, DIN 4753, part 5, and DIN 4807. Includes permanent-streamed, DHW-compatible membrane expansion tank. DVGW
certified. Also suitable for tanks with corrugated stainless-steel pipe.
Type
Item No.
Dimension
Connection
Safety valve
Expansion
vessel
Up to cylinder
volume
Price
BSC - 12l
1610488
DN 20
G 3/4“
6 bar
12 l
200 l
557,–
BSC - 18l
1610489
DN 20
G 3/4“
10 bar
18 l
500 l
533,–
Corrugated connection pipe
including carrier trays, rubber insulation and 6/4“ connector fitting. For use with heating systems rated to 50 kW.
Type
PVS-K
PVS-K-VK
PVS-L
PVS-L-VK
Item No.
1620025
1620026
1620027
1620028
Length
1000 mm
1000 mm
1350 mm
1350 mm
–
Including priority flap
–
Including priority flap
500, 800, 1000S
500, 800, 1000S
1000B, 1250, 1500
1000B, 1250, 1500
Priority flap
Suitable for tank
Price
58
172,–
282,–
227,–
335,–
TANK ACCESSORIES
Circulation lance
For use with hot water systems with circulation losses of up to max. 5 kW (for details see Technical Catalogue).
Type
Price
Item No.
WT 5
106,–
1620012
Priority flap
Special priority flap for charging TiSUN tanks in the upper section, max. transfer rating 70 kW
Type
Item No.
VK 1
Price
Connection
1630004
71,–
5/4“
Plate heat exchanger
Made of soldered AISI 316 stainless steel, including insulation and threaded connection.
Hot water and heating
eating
ti
Type
PWT 10N
PWT 20N
PWT 30N
PWT 50N
PWT 80N
PWT 100N1 PWT 200N1 PWT 300N1 PWT 500N1
1610364
1610365
1610366
1610367
1610368
1610369
1610370
1610371
1610372
For collector
surface area
up to 10 m²
up to 20 m²
up to 30 m²
up to 50 m²
up to 80 m²
up to 100 m²
up to 200 m²
up to 300 m²
up to 500 m²
Connection
1“ AG
1“ AG
1“ AG
1“ AG
1“ – 5/4“ AG
1“ – 5/4“ AG
1“ – 5/4“ AG
2“ AG
2“ AG
Item No.
H xW x D
(mm)2
Price
384 x 157 x 113 384 x 157 x 113 384 x 157 x 113 384 x 157 x 158 588 x 182 x 160 588 x 182 x 257 588 x 182 x 304 670 x 240 x 247 670 x 240 x 334
353,–
407,–
521,–
676,–
832,–
1.286,–
2.171,–
2.913,–
3.858,–
Swimming pool
Stainless-steel soldering material and hence highly corrosion-resistant, can be used with saltwater.
PWT-SB 20
PWT-SB 50
PWT-SB 100
1610373
1610374
1610375
For collector surface area
up to 20 m²
up to 50 m²
up to 100 m²
Connection
1“ – 5/4“ AG
1“ – 5/4“ AG
1“ – 5/4“ AG
360 x 185 x 112
360 x 185 x 160
360 x 185 x 257
Type
Item No.
H x W x D (mm)2
Price
1)
!
1.071,–
1.705,–
2.674,–
Including foot construction 2) Dimensions including insulation
Technical tip: We also calculate individual sizes of plate exchangers and provide a quotation.
Sludge separator for heating circuits
The sludge separtor removes sludge particles from the system water. This helps to reduce faults, wear and tear and maintenance to a
minimum. Sludge particles can be flushed out while the system is running. Including EPP insulation.
1610604
Connection
Designation
6/4“
Sludge separator 6/4“
Price
258,–
Microbubble deaerator for heating circuits
This microbubble deaerator removes circulating air and trapped air bubbles from the fluid very effectively. Automatic – no manual deaeration required. Including EPP insulation.
Type
LA 64
Item No.
1610606
Connection
Designation
6/4“
Air deaerator 6/4“
Price
264,–
Extension sleeve
For installation of an electric screw-in heating element, EPD-coated.
Type
VM 64
Item No.
1610609
Gewinde
Rp 6/4“ - R 2“
Price
28,–
59
+ accessories
SA 64
Item No.
Solar tank
Type
TANK ACCESSORIES
Electric screw-in heating element
High-quality stainless steel (Incoloy 825) immersion heater with 6/4“ male thread, with temperature regulator up to 75 °C, 150 mm unheated
zone. Integrated safety temperature limiter permanently set to 110 °C.
EEH 2000
EEH 2500
EEH 3000
EEH 3750
EEH 4500
EEH 6000
EEH 9000
1610468
1610469
1610470
1610471
1610472
1610473
1610474
Output kW
2,0
2,50
3,00
3,75
4,50
6,00
9,00
Volt
230
230
230
400
400
400
400
320 mm
390 mm
390 mm
390 mm
470 mm
470 mm
690 mm
234,–
234,–
234,–
288,–
299,–
299,–
299,–
Type
Item No.
Installation length
Price
!
Technical tip: When using the Pro-Clean®, Pro-Heat or FS fresh water tank, an extension sleeve is required!
Electric flange heating
High-quality stainless steel (Incoloy 825) flange heater, flange version DN 200, with temperature regulator to 75 °C, 150 mm unheated zone.
Integrated safety temperature limiter permanently set to 110 °C.
Type
Item No.
Output kW
Volt
Installation length
Price
EFH 12
1610483
12
400
550 mm
652,–
EFH 18
1610484
18
400
550 mm
999,–
EFH 30
1610485
30
400
700 mm
1.083,–
Bimetallic dial indicator thermometer
Including brass sensor pocket with1/2“ male thread, measuring range 0-120 °C.
Type
Item No.
ZT 150
1610284
Housing Ø
Length
80 mm
150 mm
Price
14,–
Boiler thermostat
Including brass sensor pocket with 1/2“ thread, break and make contact, measuring range 30-90 °C.
Type
Item No.
Adjustable range
Length
Price
BT 210
1610318
30 – 90° C
210 mm
43,–
BT 100
1610320
30 – 90° C
100 mm
37,–
!
Note: The BT 100 boiler thermostat is intended for size 200–500 BE-SSP tanks.
For BE-SSP 200, a 1/2“ valve extension must also be used on site.
Sensor pockets
Made of chrome-plated copper, 1/2“ - thread with cable strain relief.
Type
Item No.
Length
Interior Ø
Price
TH 100
1610068
100 mm
6,5 mm
17,–
TH 150
1610069
150 mm
6,5 mm
19,–
Correx Up impressed current anode
Maintenance-free titanium anode protects tanks from corrosion damage by means of potential-controlled impressed current supply.
Type
FA-S1
60
Item No.
1610064
Use
For enamelled tanks up to 1000 l
Price
310,–
INSTALLATION SERVICES
Installation services for FM module collector
Type
Item no.
Designation
Unit
Price
FM-MON 1
1800108
Travel, including installation of the 1st collector with inclined lift to 20 m, zone 1
per item
on request
FM-MON 2
1800109
per item
on request
FM-MON 3
1800110
per item
on request
FM-MONKA 1
1800111
Travel, including installation of the 1st collector with mobile crane to 29 m, zone 1
per item
on request
FM-MONKA 2
1800112
per item
on request
FM-MONKA 3
1800113
per item
on request
FM-MONEI
1800034
Installation price of one FM collector/in-roof
per item
on request
FM-MONEP
1800035
Installation price of one FM collector/parallel installation on roof
per item
on request
FM-MONEA
1800036
Installation price of one FM collector/standing on roof or free-standing
per item
on request
FM-MONZA
1800037
Removal of the roof tiles including removal from the roof
per item
on request
FM-MONZE
1800038
Placement and adaptation of roof tiles
per item
on request
FM-MONA40
1800040
Surcharge for roof pitch over 40°
per item
on request
MON-FP
1800016
Installation of the flange plates (bitumen and elastomer)
per m2
on request
MON-FP-A
1800029
Travel to/from site for installation of flange plates (only zone 1)
per item
on request
FM-DAEIN
1800041
Roof insertion (only for parallel installation, ventilation tiles on site), forward & return flow
per insertion
on request
SPMON
1800098
Flat rate cancellation charge2
on request
Installation services for in-roof collector FI and on-roof collector FA (see also page 62)
Item no.
Designation
Unit
Price
K-MON 1
1800114
Travel, delivery and installation of a large collector with a mobile crane (to 29 m crane length), zone 1
per item
on request
K-MON 2
1800115
per item
on request
K-MON 3
1800116
per item
on request
KK-MON
1800022
Extra cost for delivery and installation for every additional collector
per item
on request
per construction site
on request
per item
on request
per insertion
on request
K-A40
1800021
Extra cost for mobile crane with a jib length of 30 m or longer
MON-FP-A
1800029
Travel to/from site for installation of flange plates (only zone 1) 3
DA-EIN
1800007
insertion for connections (forward flow + return flow 4, suitable deaeration elements for pipe insertion are to
be provided on site 3)
GK-4M
1800117
Scaffold up to a working height of 4 m (flat, firm base required) 1
per item
on request
GG-4M
1800118
Scaffold for a working height over 4 m 1
per item
on request
MON-T
1800122
Installation on thermo roofs 3
per item
on request
SPMON
1800098
Installation zones
Flat rate cancellation charge
on request
2
Zone 1
Zone 2
Zone 3
Austria
Austria
Germany / Postcode
80 - 98
01 - 09, 30- 39; 50- 79, 99
10 - 29, 40-49
39000-39999
38000-38999
10000-37999, 40000-49999
Italy
Slovenia
Slovenia
Hungary
Hungary
Switzerland
Switzerland
France (at least 50 m2 collector surface area / installation)
France
¹ Under what circumstances is a scaffold required?
- For facade collector installations
- For roofs with eave height > 3 m and installation directly on the edge of the eaves
- For roofs > 40° without securing systems for safety harness
³ Only for on-roof collector FA
!
² The cancellation fee can be charged if:
- the installation is cancelled too late and the crane is already on its way
- the installation is cancelled due to lack of preparatory work on site
- the installation is cancelled due to incorrect information specified in the collector order sheet
4
Only for in-roof collector FI
Important Information for costing!
Road blocks, permits and safety equipment on site are charged on a time and material basis. Additional work and idle time are charged separately. The flashing must be made on site for roof
coverings not included in the price list. Installation price on request for 100 m² and over.
All prices in EUR, excl. VAT net prices
61
Service
Type
INSTALLATION SERVICES
FA: Parallel installation on roof Roof pitch up to max. 40°, above this, additional charge of 50% on the installation item in question.
Type
Item no.
Designation
Price
Unit
P-MON-PL
1800008
Installation of all original TiSUN® parallel installation components (except flange plates)
per m2
on request
MON-FP
1800016
Installation of flange plates (bitumen and elastomer)
per m2
on request
UG-MON-FP
1800015
Installation of the collector frame on flange plates
per m2
on request
FA: Standing installation on roof Roof pitch up to max. 40°, above this, additional charge of 50% on the installation item in question.
Type
Item no.
Designation
Price
Unit
UG-MON-PL
1800012
Installation of the collector frame and roof mounts for tiles, plain tile, slate, flat cement asbestos, side lock
panels, corrugated cement asbestos, corrugated and profiled sheet metal
UG-MON-BL
1800013
Installation of the collector frame and roof mounts for standing seam roofing
per m2
on request
MON-FP
1800016
Installation of the flange plates (bitumen and elastomer)
per m2
on request
UG-MON-FP
1800015
Installation of the collector frame on flange plates
per m2
on request
per m
2
on request
FA: Free-standing installation Installation of collector frame and installation components on foundations and on-site frames.
Type
UG-MON-SS
Item no.
1800014
Designation
Price
Unit
Installation of the collector frame and installation components for concrete foundations and free-standing
installation
per m
2
on request
Installation of the flashing of the FI in-roof collector
Roof pitch to max. 30°, if steeper additional cost of 50% on the installation item in question; flashing for customised collectors has to be built on site.
Type
Item no.
Designation
Price
Unit
1800025
Installation of the flashing, including the collector array
per m
on request
ZI-MON
1800119
Removal and replacement of the roof tiles including transfer from the roof by crane, provision of pallets on
site (removal and replacement of plain tile, slate, flat cement asbestos, shingle and Spanish tile on site)
per m
on request
AZ-BSE
1800120
Exposure and covering of plain tiles / shingle roof (single-layer covering)
per m
on request
AZ-BSD
1800121
Exposure and covering of plain tiles / shingle roof (dual-layer cover)
per m
on request
MON-T
1800122
Installation on thermo roofs
per item
on request
BL-MON-U
SERVICES AND COMMISSIONING
Commissioning of the solar system
The following additional commissioning fees are charged according to commissioning work carried out. The system has to be ready for operation
(fully installed, pressure tested, with electrical connections and filled, if appropriate). Commissioning: Setting the control unit, function check,
instruction of the system operator and handover certificate.
Type
Item no.
Designation
Price
AF
IBSOL 25
IBSOL 50
IBSOL 100
IBSOL 200
IBSOL 500
1800089
1800088
1800055
1800056
1800058
1800059
Filling the system,
excl. Antifreeze
on request
Commissioning of a ICommissioning of Commissioning of a Commissioning of a Commissioning of a
solar system up to a solar system up to solar system up to solar system up to solar system up to
500 m²
200 m²
100 m²
50 m²
25 m²
on request
on request
on request
on request
on request
Maintenance of the solar system
The following additional maintenance fees are charged according to maintenance work carried out. The system has to be ready for operation (fully
installed, pressure tested, with electrical connections and in operation). Maintenance: Control system check, visual and functional inspection, frost
protection check, system pressure check, instruction of system operator and handover certificate.
Type
Item no.
Designation
Price
FT
AWSOL 25
AWSOL 50
AWSOL 100
AWSOL 200
AWSOL 500
1800090
1800091
1800092
1800093
1800094
1800095
Replacement of antifreeze, excl. antifreeze
Maintenance of a
system up to 25m²
Maintenance of a
system up to 50 m²
Maintenance of a
system up to m²
on request
on request
on request
on request
Maintenance of a
Maintenance of a
system up to 200 m² system up to 500 m²
on request
on request
There will be an extra charge for all work performed beyond these flat fees!
Service
Type
Item no.
Designation
Price
62
SV
1800063
Service, per hour
on request
TS 25
FK 50
1800066
1800067
!
We also offer:
Service contracts over several years. Just ask our order
processing department!
Service technician, Travelling expenses per
km (from/to Söll, Austria)
per hour
on request
on request
All prices in EUR, excl. VAT net prices
GENERAL
SERVICE TERMS AND CONDITIONS OF BUSINESS
GENERAL TERMS AND CONDITIONS OF BUSINESS AND DELIVERY
1. General:
These terms and conditions of business are an integral part of every product and service we offer and every legal
transaction with TISUN® GmbH (referred to as TISUN® henceforth). Other agreements, especially contradictory oral
arrangements, are only legally binding if confirmed in writing. General terms and conditions of business, regardless
of the type, that conflict with these terms and conditions of business shall be considered invalid and therefore do not
form part of the agreement. If individual provisions in this agreement prove to be legally invalid, the remaining provisions are not affected.
2. Products and services:
Products and services offered by TISUN® are subject to confirmation. We reserve the right to make changes to products due to technical developments. All technical documents are intellectual property of TISUN®.
3. Orders:
Telephone orders are only accepted at the risk of the contract partner and subject to the currently applicable general
terms and conditions of business. Direct orders by the contract partner become legally binding on sending the order
confirmation or the delivery slip. Oral agreements, promises etc. including those of representatives and other company
employees of TISUN® require written confirmation before becoming legally effective. Special requests and guarantees
of special properties which vary from standard offers must be agreed in writing.
4. Prices:
Unless otherwise agreed in writing, prices are net prices ex works, not including packaging and not including discounts. They are guideline prices unless a fixed price has been expressly agreed in writing. If material costs increase in
the period of time between bid quotation and signature of the contract, the prices shall increase accordingly, provided
that the time between order placement and provision of the service is over two months. All products and services
above and beyond the original subject of the contract must be paid for in accordance with the actual cost. Any price
reductions agreed shall only be applicable if all ordered goods are purchased.
5. Delivery/provision:
Delivery is made at the contract partner’s cost and risk. The risk and price hazard shall be passed on to the purchaser
with the transfer of the goods to the freight carrier or forwarding agent. The contract partner is aware that delivery –
also if this should be made directly by TISUN® – requires an access road that can accommodate a heavy truck. The
contract partner shall also pay for and obtain any premissions and traffic safety measures that may be required. If
these requirements are not fulfilled by the specified delivery address, the contract partner has to bear any resulting
additional costs. Delivery will be made to the address of the contract partner unless agreed otherwise. If the delivery
address should change after conclusion of the contract, TISUN® is entitled to charge the contract partner the extra
cost incurred (travelling expenses etc.). The contract partner undertakes to provide staff to unload the goods, particularly if products are very heavy or bulky. The contract partner is required to store the goods separately from the
goods supplied by other vendors and identify them as TISUN® products. The delivery periods are subject to correct and
punctual delivery by sub-suppliers. Delivery periods are never binding unless a fixed date is expressly agreed. They
begin on receipt of the order confirmation or on the day of agreement by the sales staff, but never before clarification
of all execution details. Failure of the contract partner to provide information about the latter in good time, will mean
that the contract partner will also have to bear responsibily for resulting delays in delivery and TISUN® shall be freed
from any claims for liability. The same shall apply for fixed dates. If no other agreements are made, delivery periods are
quoted from the shipping location by TISUN®. If the agreement is changed retrospectively, TISUN® is entitled to fix a
new date of delivery. The goods shall be considered to be delivered on time even if these are not fetched immediately
after notification of readiness for shipping on the delivery date. If this occurs, TISUN® is entitled to store the goods at
the cost of the customer. TISUN® is not liable for delivery delays not caused by the company or due to slight negligence.
In this case, the contract party waives the right to withdraw from the contract and to assert claims for damages. The
contract partner is liable for delays in the provision of the service caused by themselves and must bear all resulting
additional costs. These costs can be invoiced separately. Natural catastrophes, labour disputes, sovereign acts, war,
riots, traffic impediments and other unforseeable events, etc., release TISUN® from the obligation to deliver for the
duration of their effect, or entirely, if delivery becomes impossible.
6. Shipping costs:
All shipping costs must be borne by the contract partner, unless other agreements are made.
7. Transport damage:
The contract partner bears the costs resulting from transport damage due to force majeure and other risks excluded
from the indemnity insurance of the freight carrier or forwarding agent. The contract partner or recipient is obliged to
check the condition of the goods together with the delivery company on receipt. In case of externally visible damage
or short delivery, written reservation has to be indicated on the delivery slip or shipping document and confirmed by
signature of the delivery company. Not immediately recognisable short deliveries or damages have to be reported in
writing to the delivery company as well as to TISUN® not later than within three days after acceptance of the delivered
goods, otherwise all claims for compensation are void. If the contract partner fails to fulfil these inspection and notification obligations, the contract partner has to make any claims for compensation directly to the delivery company. In
this case, TISUN® shall transfer its claims from the shipping or transport contract to the contract partner if requested.
In case of properly certified transport damage, the contract partner is required to report the damage immediately upon
receipt of the goods to TISUN® in writing, otherwise claims for compensation are lost. Claims against third parties
resulting from this damage must be ceded to TISUN® on request. If it should not be possible to make a claim for compensation from the delivery company because the contract partner reports the damage late, or if the claims are void
as a result of the statute of limitations, TISUN® is released from any liability for compensation to the contract partner.
8. Complaints and warranty:
The contract partner or recipient of the goods is obliged to inspect all of the goods for any deficiency after delivery of
the goods and to report these in writing to TISUN® not later than within 3 working days after delivery. The warranty to
the contract partner shall become void if this stipulation is not fulfilled.. If a deficiency is recognised at a later stage,
but before expiry of the warranty period, the contract partner is required to report this in writing to TISUN® within one
week after discovery and to refrain from any further processing. If no report is sent within the period set, the goods
shall be considered approved. In deviation from legal regulations, it is hereby agreed that the warranty period shall expire two years after the issue date of the invoice. If materials of the tanks in the TISUN® product range should demonstrably fail to meet the requirements of the standard EN 12975, free of charge repair shall be conducted, or if this is
not appropriate, the tank concerned shall be replaced at no extra charge, within a period five years after invoice issue
date. This shall not apply in case of incorrect assembly and installation, exceeding the permitted operating pressure
and improper use. If collectors in the TISUN® product range should lose functionality within ten years after the relevant
invoice issue date, TISUN® shall be committed to restore the collectors. This excludes all damage, malfunctions and
changes attributable to incorrect assembly and installation, mechanical stress, force majeure and weather-related influences (e.g. broken glass in collectors) as well as operating and mainenance errors. This special regulation for collectors shall also not apply for minor variations in colour, decrease in performance and damage and changes to the
surface that have no effect on the functionality of the collector. All warranty and claims for damages including claims
from the special regulations for collectors and tanks in the TISUN® product range shall become completely void, if assembly and start-up installation was not carried out by an authorised specialised company (installer), with observation
of the respectively applicable assembly and operating instructions, if TISUN® or those appointed by the company were
not given an opportunity to inspect the claimed deficiencies on site immediately after their occurance, if no evidence of
proper start-up and conduction of annual inspection and maintenance by a specifically authorised specialist company
can be supplied, if the protective anode of all domestic hot water tanks was not checked by an authorised specialist
company every year and found to be functional, if a protective anode is missing or the permitted operating pressure
is exceeded, if oxygen is present in the heating system, if finned tube heat exchangers are utilised without installed
electrical separations, if the original TISUN® frost protection and the hydraulic connection and expansion sets
with expansion compensation are not used. To ensure full functionality of the solar system, TISUN® recommends
conduction of a solar check by TISUN® or an authorised TISUN® partner at least once a year. No changes may be made
to the subject of complaint without express written approval, or the warranty claims become void. Warranty is provided
at the discretion of TISUN® in the form of repair or replacement of the subject of complaint. Replaced parts and products
become property of TISUN®. There is no entitlement to conversion or price reduction, unless the deficiency cannot be
rectified within a reasonable period. Any labour costs associated with replacing the goods and the costs of finding the
fault shall be borne exclusively by the contract partner. No liability for production- and material-related variations in colour
is accepted. If the TISUN® products are installed in other systems, these are required to comply with the technical standards in our enclosed product descriptions and operating instructions or the warranty becomes void. Damage resulting
from improper treatment by the contract partner or the contract partner’s assistants is excluded from the warranty. The
right of recourse in accordance with § 933b ABGB (Austrian Civil Code) between the parties to the contract is excluded.
9. Exclusion of liability:
No liability whatsoever is accepted for consequential harm caused by a defect. TiSUN will not accept liability for correct
static execution of the base and the on-site frame.
10. Product liability and compensation:
TISUN® shall not accept liability for the correctness of data on handling, operating or running contained in brochures,
technical descriptions or other directions of the manufacturers. Resulting damage is the liability of the manufacturer
and/or importer and all claims must be made to him/them. TISUN® undertakes to cede any claims for compensation
resulting from the contractual relationship with the importer or manufacturer to the contract partner on request. The
contract partner waives the right to claim compensation for follow-on damage and to claim for lost profit from TiSUN®,
if TISUN® is not responsible for either intentional or grossly negligent action. TiSUN® points out that no solar Keymark
certification is avaialble for custom size collectors.
11. Returning delivered goods:
Returns of non-defective goods are only accepted in special cases and after prior written approval. Custom
productions, special orders, products that are not in the original packaging or damaged cannot be taken back at all. The
return delivery has to be sent with shipping paid and at the risk and cost of the contract partner to the TISUN® delivery
warehouse. Credit for returned goods in perfect condition will be calculated based on the invoice amount and the
remaining value of the goods minus handling fees of 15% of the net value of the goods.
12. Payment:
If no other agreements were made, all payments must be made immediately. The full amount must be paid by credit
transfer, including all transaction fees. If a discount is granted, all previous invoices must be paid to entitle the
customer to deduct the discount amount. Cheques and bills of exchange will only be accepted if agreed separately and
only as payment, not in full discharge of the obligation. All recovery and discount charges are payable by the contract
partner. Payments must be made relieving debt only to the account specified in the order confirmation or invoice or to a
person with the authority to collect. Sales tax on the entire price must be paid in full after billing unless other terms and
conditions of payment were agreed correcting the purchase price.
13. Late payment:
If the payment target is exceeded, if payment is received late or if deadlines are not met, late charges calculated
at 5% above the rate set by the Austrian National Bank will be levied. We reserve the right to claim for damages
beyond that. f the contract partner makes a late payment, TISUN® is entitled to demand immediate settlement of
all outstanding payments. This shall apply even if a deferral was agreed before. TISUN® is furthermore entitled to
demand advance payment and sureties for outstanding deliveries, without affecting other rights. All dunning and
collecting charges incurred, as well as legal costs, have to be paid by the contract partner. The latter agrees that
incoming partial payments will first be used for costs and dunning fees, then interest and other additional fees, and
finally for the principal purpose.
14. Retention of title:
All delivered, installed or otherwise supplied products shall remain property of TISUN® until full payment of all
demands. If goods subject to retention of title are processed with goods belonging to others, title is not lost. Instead, the
new item becomes joint property, to a value in proportion to the value relationship of the processed goods at the time
of processing. If the goods under retention of title are sold on, the contract partner cedes the resulting claims from the
purchaser(s) to the amount of the value of the sold goods under retention of title as surety to TISUN®. Until revocation
at any time, the contract partner is entitled to collect amounts due ceded to TISUN® as surety. However, the contract
partner may not cede these to third parties. On request by TISUN® the contract partner is obliged to inform his buyer of
the cession and to tell him that the buyer can only discharge his debts by paying TISUN®. The agreed cession of claims
does not release the contract partner from on-time payment of all claims. The contract partner is obliged to inform TISUN®
immediately about seizure of the goods under retention of title.
15. Place of performance and jurisdiction:
Place of performance for both parties is the headquarters TISUN®. For all legal disputes between TISUN® and the
contract partner, regardless of the amount in dispute, the sole competent court shall be the district court of Kufstein
(Bezirksgericht Kufstein) in accordance with § 104 JN (Austrian Code of Judicial Organisation) or Article 23 of the Council Regulation (EC) No 44/2001 (EuGVVO). This also applies to law cases concerning bills of exchange and cheques.
16. Applicable law:
The contract parties agree that only Austrian law will be applicable for all legal transactions with TISUN® including the
matter of the coming into existence of the contract. The application of the provisions of the United Nations convention
on contracts on international purchasing is excluded on mutual agreement.
17. Data storage:
The contract partner agrees that his data shall be recorded, stored and processed electronically where necessary for
business, and in accordance with the data protection law.
18. Trademark protection:
TISUN®, the TISUN® logo, TISUN®.com and Pro-Clean are trademarks or registered trademarks of the TISUN® group of
companies in Austria and/or other countries.
All rights of use and marketing of the trademarks are exclusively reserved for TISUN® Brand GmbH (HYPERLINK www.
TISUN.com/brandguide www.TISUN.com/brandguide).
19. General:
TISUN® reserves the right to make technical changes to the offered products. No rights whatsoever can be derived
from any setting and printing errors in the price lists. Images shown therein are symbolic photographs. Product prices
are net prices excluding value-added tax. Prices are subject to change. Prices quoted without specificaiton of quantity
are prices per piece.
Version 09/2009 – © TISUN® GmbH, Photos: TISUN® GmbH, Thomas Kirschner
63
PL_EN_B_EUR_02_0111_1019102
64
TiSUN GmbH | Stockach 100 | A-6306 Söll
Tel.: +43 (0) 53 33 / 201 - 0 | Fax: +43 (0) 53 33 / 201 - 100 | E-Mail: office@tisun.com | www. tisun.com

PRICE LIST 2011

Transcription

Similar documents

collector`s edition black sun galaxy pegasus top redemption form

SIGORA HAITI STRATEGY PLAN (9mb PDF)

Valle Escondido

octopus - C-SEA

System Administration

Case Study – Project Tank und Rast – Scala SEEN MEDIA ISS

new homeowners property tax guide

Home Power #079 - Richard Guy Briggs

asme global development review

Installing And Configuring Windows Deployment

Rhino-Rack Folding Kayak Carrier S512

March 2016 - Mountain States Collector

"How To" Advice for Beginning PPC Collectors