RSN200 RSN200

IDMTL EARTH FAULT AND
OVERCURRENT RELAY
RSN200
Made In Japan
W• High Transient Withstand
E
N • EMC Compliant
• Fault Clearance Safety Reset
Kasuga Digital IDMTL Type RSN200 Earth Fault and Overcurrent Relay is designed to protect
electrical equipment and networks against overcurrent and ground fault. The relay comply to
BS 142 and IEC 255.
Some useful features of the relay :
• User friendly
• Compact in size
• Earth Fault can be configured to be
either IDMTL or DTL
• Earth Fault and Overcurrent setting is
selectable to either 1.3/10 or 3/10
curve
• Wider ranges setting in smaller steps
• Recall past % phase trip from memory store
in the relay
• Fully microprocessor controlled relay
• Built in surge arrester to absorb overvoltage/transient
• Mechanical trip reset button to guard against automatic
reset before fault is identified
• High set setting available
• Auto and manual scrolling of reading display selectable
Layout
Display of %A
(100%=/5A) indicator
O/C & E/F indicator
Display of Setting
indicator
Scroll mode indicator
Test Button
Display and Setting
Selection Keys
Trip/Reset Button
SPECIFICATIONS
1. Model
RSN200
2. Supply Voltage
AC230V ± 15% 50/60Hz (other voltages are available)
3. Current Setting
Overcurrent:
20- 120% (1% step), 120-200%(5% step)
Earth Fault:
4. Time Setting Range
Overcurrent IDMTL:
2-50% (1% step)
0.09-3.0 sec at 10 times of setting current (3/10)
0.039-1.3 sec at 10 times of setting current (1.3/10)
Earth Fault IDMTL:
0.09-3.0 sec at 10 times of setting current (3/10)
0.039-1.3 sec at 10 times of setting current (1.3/10)
DTL:
0.1-2.0 sec (0.1 sec step)
5. High-set (Instantaneous protection)
2.0-10.0 times of setting current
6. Pick-up current
100~105% of setting current
7. Reset Current Value
(Setting Value of pick-up current) - 10%
8. Tripping Relay
Mechanical hold type Relay
Contact : 1c 250VAC, 5A (cos ø=1)
9. LED indication
Real time 3-digit display of individual phase
Current with auto/manual scroll
Digital display for setting parameters
Trip current indication for individual phase
R = Red colour, S = Yellow colour,
T = Blue colour, E/F = Green colour
Scroll = Red colour
Auxilliary power supply = Green LED
% (A) = Red colour, Check = Red colour
10. Life
Electrical and Mechanical more than 10,000 operation
11. Enclosure
Standard DIN case:
Protection structure :
Material:
Weight:
DIN 96 x 96 x 108mm, (Panel cutout 91±0.8 x 91±0.8 mm)
IP 30
ABS resin complying with UL94VO
Relay: Approx. 500g
Characteristics
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Ambient temperature
Ambient humidity
Voltage accuracy
Repeat accuracy
Time multiplier accuracy
-10 ~ +50°C
45 ~ 85% RH
<±3%
<±3%
<±4% or ±60m sec whichever is greater
(10 times of setting current)
Multiple of
setting current
2
5
10
20
Accuracy
±10% or ±150m sec
whichever is the
greater
±6% or ±90m sec
whichever is the
greater
±4% or ±60m sec
whichever is the
greater
±4% or ±60m sec
whichever is the
greater
Temperature accuracy
Insulation resistance
Withstand overcurrent
Power consumption
C.T. input consumption
11. Voltage withstand
<±10% at 20±20°C
>100MΩ
20 times for 3 sec – (100A for O/C, 20A for E/F)
Approx. 3.5VA
O/C Approx. 0.12VA at 5A
E/F Approx. 0.02VA at 1A
2 KV for 1 minute between all case terminals connected
together and the case earth terminal
1.5KV for a minute between independent circuit including
contact circuit
IDMTL EARTH FAULT AND OVERCURRENT RELAY RSN200
Environmental Withstand
1. Impulse test
5KV peak, 1.2/50µ sec (0.5J) between all terminals and
case, earth and between adjacent terminal
2. Temperature
IEC 68-2-1 / 68-2-2
Storage and transit - 25°C to + 70°C
3. Humidity
IEC 68-2-3
56 days @ 93% RH and + 40°C
4. Vibration
IEC 255-21-1
0.5G between 10 Hz and 150 Hz
5. Electromagnetic wave
Non-operation for radio frequency at 130-180MHz and
900-1000MHz (by Walkie talkie of 5W)
6. Electrostatic discharge
IEC 61000-4-2
Air discharge method ±8KV
Contact discharge method ± 6 KV
7. Electrical fast transient/burst
IEC 61000-4-4
± 2KV between power supply terminals
Scale Characteristics
1.3/10 Inverse
Multiplies of Current
X2
Time Multiplier (TM)
X3
X5
Standard Operating Time
0.03
0.13
0.08
0.05
0.10
0.44
0.27
0.19
0.15
0.65
0.41
0.28
0.20
0.87
0.55
0.37
0.30
1.31
0.82
0.56
0.40
1.74
1.10
0.74
0.50
2.17
1.37
0.93
0.80
3.48
2.19
1.48
1.00
4.35
2.73
1.86
X3
X5
Scale Characteristics
3/10 Inverse
Multiplies of Current
X2
Time Multiplier (TM)
Standard Operating Time
0.03
0.30
0.19
0.13
0.05
0.50
0.32
0.21
0.10
1.00
0.63
0.43
0.20
2.00
1.26
0.86
0.30
3.00
1.89
1.28
0.50
5.02
3.15
2.14
0.80
8.02
5.04
3.42
1.00
10.03
6.30
4.28
For other setting range, please refer to chart on back page
IDMTL EARTH FAULT AND OVERCURRENT RELAY RSN200
Characteristic as per IEC 255-3 and BS 142
TIME CURRENT CHARACTERISTIC
TIME CURRENT CHARACTERISTIC
100
100
1.3/10 Inverse
3.0/10 Inverse
10
OPERATING TIME (sec)
OPERATING TIME (sec)
10
t=1.00
1
t=0.70
t=0.50
t=0.40
t=1.00
t=0.70
t=0.50
1
t=0.40
t=0.30
t=0.20
t=0.30
t=0.10
t=0.20
t=0.10
0.1
t=0.05
0.1
t=0.03
t=0.05
t=0.03
inst.
0.01
1
10
MULTIPLES OF SETTING CURRENT
inst.
100
0.01
1
10
100
MULTIPLES OF SETTING CURRENT
Exclusive Agent:
51 Kim Keat Road, Unit 05-02 Mun Hean Industrial Building, Singapore 328821. Tel: (65) 6250 0522 Fax: (65) 6253 6885 / (65) 6253 5879
E-mail: munheansing@munhean.com.sg Website: http://www.munheansingapore.com