FOR SALE 1982 XJ1100

FOR SALE
CUSTOM RESTORE 1982 YAMAHA XJ1100 MAXIM
HAS BEEN RIDDEN ONLY 650 MILES SINCE RESTORE
GOOD PROJECT BIKE FOR SOMEONE,
BIKE WAS PURCHASED SEVERAL YEAR AGO AS A BASKET CASE
LEFT FOR DEAD WITH ONLY 10,500 MILES ON IT. I ALWAYS
WANTED A XS1100 SPECIAL, THEN CAME A CROSSED THIS. THAT
STARTED MY PROJECT.
I WOULD LIKE TO SEE SOMEONE WITH MY LOVE FOR THIS BIKE TO GET IT. I HAVE OVER
$6000.00 INVESTED (DUMB I KNOW)
$2500.00 OR BEST OFFER FOR BIKE
rlwood@chartermi.net
LISTED BELOW IS WHAT ALL I DID AFTER MY PROJECT STARTED
1 : Stripped down to the bare frame & Sand Blasted, Powder coated the Frame, Swing arm, Both Stands, All
Brace's
2 : Fenders, Tank, Side Covers, All painted Gloss Black to get a mirror finish look.
3 : Pulled the top end off of the motor and the valves ground and put in new valve guides, Ordered a Big Bore
Kit had it bored and the new pistons fitted, Looked over everything and it all looked new and in A1 shape.
4 : Carbs, tore down, dipped, put in all new rubber goods, New CV Boots & Slides, New Intake Boots, Put in
a Dyna-Jet Kit, K&N Air Filters, Tuned with Merc Syc tool & YICS tool.
5 : Brakes, Stripped down calipers & master cylinders, put in kits, had stainless steel brake lines made all
around, put on new pads.
6 : Gauge Cluster was broken, picked up on on E-Bay (It did not work) so I took them both apart and built one
that did and while it was apart re-set the odometer on the e-bay parts to zero.
7 : Exhaust was trash, so I ordered a new MAC 4-2 with turn outs,
8 : Put on a new pair of, Metizler ME880's
9 : Front Forks were a little spongie, so I put in a set of after market springs and new seals.
10 : I also re-work the Fuse Block and put in std. knife fuse's
11 : I did not care for the turn signals & License plate bracket, so I re-worked things a bit, shortened the rear
turns so they were closer to the bike, and put on a after market plate bracket, the front turns I hated them
coming out of the headlight, so off they came and I picked up a set on e-bay with the visor's for the turn's
and headlamp.
12 : One more thing I hated is the handlebars, I re-worked the tree to put on a set off a XS650 Special.
13 : After the 1st. Ride I found out I had the 2nd. Gear problem, so I flipped the bike over and last year I did
the Dremmel Fix & added a washer (Worked Great)