AES-IntelliNet - AES Corporation

AES-IntelliNet
Private Mesh Radio
Alarm Communications
Central Monitoring Stations
College and University Campuses
Municipalities
School Districts
Corporate Campuses
Military Bases
AES-IntelliNet™ is a private, two-way, wireless mesh alarm
communications system that provides significant performance
and cost benefits over legacy telephone, radio tower
or cellular-based alarm communications systems.
AES-IntelliNet
solutions offer:
Fast, reliable, critical event solutions for alarm monitoring companies,
building owners and facilities managers, without recurring monthly costs
• Increase Profits/RMR
Increase Profits/RMR
High Reliability and Speed
Central stations increase profits and
recurring monthly revenue (RMR) by
eliminating monthly costs associated
with public telco services.
AES-IntelliNet’s unique patented mesh
network creates multiple paths for
the alarm to reach the CMS offering
high reliability and significant speed
improvements over traditional alarm
communications technologies. If
any transceiver unit in the network is
unable to store and forward the data,
the network immediately analyzes and
selects an alternate route ensuring that
the alarm communications is delivered
to the CMS.
•Reduced
Operating Costs
Reduced Operating Costs
•Long Range Coverage
•Higher Reliability
and Speed
•Low Installation
and Management Cost
•Control of Critical Event
Communications
AES-IntelliNet doesn’t require phone
lines, cellular networks or radio towers.
Each unit is a transmitter and receiver
creating a network with multiple
communication paths to the Central
Monitoring Station (CMS). AES-IntelliNet
is customer-owned and operates with
no monthly telephone, cellular, or tower
based private radio fees.
Long Range
AES-IntelliNet networks grow by adding
additional Transceiver Units. Data
hopping, typically 3-5 miles (and often
much greater) means multi-building
facilities can easily and inexpensively
be monitored with AES‑IntelliNet.
Low Installation and
Management Cost
The two-way sending and receiving
capability means that AES-IntelliNet
networks can be managed remotely
from the CMS. As new units are added,
the network dynamically reconfigures
itself to incorporate the new paths.
This allows network expansion without
investing in additional infrastructure or
incurring additional third party costs.
AES-IntelliNet is a wireless mesh network made up of smart
subscriber units, which act as a receiver, transmitter and
repeater. Each alarm site is linked to the network by this
smart device. The network allows distant subscriber units to
use other subscriber units to relay the alarm message to the
central receiver. Signals follow the shortest, most reliable route
available insuring fast reliable alarm communications.
Central Station
Subscriber Units
Central Monitoring Receiver
7705i and 7005i MultiNet Wireless-to-Internet
Monitoring Systems
These advanced central receivers manage and monitor one or
more AES-IntelliNet mesh radio networks. Alarm signals are
communicated via mesh radio (transceiver units) to a remote or
central receiving point (IP-Link) in a region and then relayed via
the Internet to the Central Monitoring Station. Remote networks
of AES-IntelliNet Transceiver Units can be backhauled over any
distance via the Internet. The 7705i meets UL/ULC requirements
and is NFPA compliant.
The key AES MultiNet system components are:
• 7705i/7005i Receiver – A rugged rack mounted receiver that
contains the AES receiver integrated with the Linux server
• 7170 IP Link Remote Receiver – The 7170 collects
AES‑IntelliNet wireless signals and converts them to
TCP/IP packets for transmission to the 7705i/ 7005i.
No More Boundaries
Multi-region fire and security alarm monitoring companies can
now offer the benefits of AES-IntelliNet 2-way wireless alarm
communications to customers in regions that are separated
by too great a distance to solely use radio transmission. Large
regional users of AES-IntelliNet networks can use the AESMulti‑Net system to expand their system capacity, increase
coverage and increase recurring revenue.
Applications
UL Fire Monitoring/
ULAA
Burglary
7788F Series
UL listed and NFPA
compliant for UL864, Ed 9
fire alarm and AA burglary
monitoring. Provides the
wireless communication
link between the fire alarm
panel and the central
station receiver, replacing
both phone lines.
Optional equipment
includes the 7794 IntelliPro
Fire dialer capture module
for full alarm zone data
transmission from the
FACP, via radio to the
monitoring station.
Interactive Services
SiteLink24
Burglary
7058E Series
The 7058 Series is designed
for burglary requirements and
offers 8 programmable zones
and battery backup, all housed
in rugged, lockable steel box
for long lasting protection.
Optional equipment includes the
7094 IntelliPro dialer capture
module for full alarm zone data
transmission.
Interactive Security Services for
AES-IntelliNet combine the best of
both worlds: AES-IntelliNet mesh
radio technology for delivery of
alarm and other critical signals,
plus Interactive Services delivered
via high-speed Internet. The
result is the highest reliability and
speed of operation for critical
event signal delivery, plus the
certainty that the communication
technologies will never become
obsolete. The products that enable
a subscriber to access these
services are vthe 7058E-IPD1 and
7659-IPD1-R.
7788F Series
7058E Series
Primary Application
Commercial Fire
Burglary
UL Listed
UL 864 – Ed. 9
UL 2017
Radio Frequency Bands
146-174 MHz, 400-512 MHz
146-174 MHz, 400-512 MHz
RF Power
2 Watts
2 Watts
Full Burglary Data
w/IntelliPro Fire 7794
w/IntelliPro 7094
Full Fire Data
w/IntelliPro Fire 7794
N/A
Programmable Zone Configurations
8
8
Line Fault Monitor
Included
w/IntelliPro 7094
Battery Backup
7.5 AH
7.5 AH
Transformer Primary
16.5VAC
16.5VAC
Power
40VA
40VA
AES-IntelliNet™ meets the following compliance standards:
• NFPA 72 Compliant
• UL Standard 609
• NTIA Standards for Narrowband Compliance
• UL Standard 827
• UL Standard 864 – Edition 9
• UL Standard 681
• UL Standard 1610
• UL Standard 365
• UL Standard 2017
• UL Standard 985 (pending)
• UL Standard 1023 (pending)
• CSFM – California State Fire Marshall
• ULC Standard S559 • ULC Standard S304 (pending)
AES-IntelliNet™ is the industry leader in delivering highquality mesh radio networks to the fire and security industry
in commercial, corporate, government, and educational
applications with its broad line of products and advanced
network management tools. Users of AES-IntelliNet networks
have gained significant revenue, communications, and cost
advantages while meeting the high standards of reliability
required for the fire and security industry. AES‑IntelliNet alarm
monitoring systems are deployed at hundreds of thousands of
locations in over 85 countries worldwide
AES-IntelliNet offers a variety of purchase programs and leasing
options that fit your budget. For more information, please
contact AES-IntelliNet by calling
1-800-237-6387 or +1 978-535-7310,
by emailing info@aes-intellinet.com,
or visiting www.aes-intellinet.com
Headquarters
Peabody, MA USA
Regional Offices Cincinnati, OH; Houston, TX; Philadelphia, PA;
Topeka, KS; Washington, DC; Belgium; Singapore
Your Local AES-IntelliNet Representative
Copyright 2013 AES Corporation
AES-IntelliNet is a registered trademark of AES Corporation
GEN5/13/R2-A4 Patent Protected
MultiCHANNEL Technology:
Integrating Wireless and IP technologies for a better
user experience and enhanced security.
May 2013
285 Newbury Street • Peabody, MA 01960 USA
1-978-535-7310 • www.aes-intellinet.com
MultiChannel Technology: Integrating Wireless & IP Technologies
OVERVIEW
In the mid-1990s, AES Corporation created what became one of the world’s best-selling wireless alarm
communication technologies, AES-IntelliNet. The advantages over competitive technologies are
numerous including speed, reliability, security, cost and the guarantee that the technology will never
sunset. However, market innovators cannot be complacent because client needs evolve as the security
market regularly redefines itself. To further enhance AES-IntelliNet’s capabilities and meet demand for
true dual technology networks, AES has added full IP transmission and reception to the AES-IntelliNet
arsenal of solutions.
KEY ISSUES
Alarm providers, official bodies and insurers are all focused on total security of transmission as the
barometer for success. With decades of experience and hundreds of thousands of end users,
AES-IntelliNet’s two-way mesh radio has proved to be the most reliable method for transmitting
critical alarm signals back to the Central Station. Despite the industry-leading efficiencies, AES is
constantly pursuing ways to further enhance it’s reliability. Our team looked at what can disrupt
competitive technologies such as cellular, GSM, GPRS, IP and PSTN as a means for improving our own
performance. Here’s what we identified as key technological loopholes.
1. Sluggish Transmission Speeds
Transmission times will slow down from situations overloading a network’s capacity. For instance, a
national power outage can generate thousands of ‘AC failure’ messages. In such circumstances, cellular,
GSM, and IP networks have completely lost or delayed messages for multiple days. AES-IntelliNet, on
the other hand, will deliver 100% of its messages, within a reasonable time frame.
2. RF Jamming
RF jamming has never succeeded with AES-IntelliNet, even in situations where the superior jamming
technology exists. Unlike AES’s unique wireless mesh network, cellular and GSM networks are disabled
by jamming devices that are relatively easy to obtain. There are even smart jammers that can mimic
GPRS acknowledgements, thus defeating the GPRS transmissions of alarm messages.
3. Antenna Cuts
Antenna cuts present a potential weakness for any wireless system if the antenna is destroyed. If a
subscriber unit is correctly installed within the protected zone, antenna cuts are not possible because
the intruder will be detected prior to having access to the antenna. Any sabotage to the antenna would
be locally reported in the sabotage or anti-tamper function of the alarm panel. With cellular and GSM
networks, the local provider’s antenna could be attacked rendering the network useless. This cannot
affect AES-IntelliNet as it has up to 8 wireless paths back to the Central Station.
4. Real Time Information
Today customers are used to “real time information” being readily available at the tip of their fingers.
Customers expect that today’s alarm systems are no longer limited to on-site operation. This “enhanced”
interface happens via mobile units, desktop, and must be at the same time, integrated with the security
system, in a very reliable manner.
5. Ease of Integration
The deployment of the new technologies should be easy to integrate with the existing customer base.
The solution adopted cannot impose a “replacement” of the existing functional system.
1-978-535-7310
www.aes-intellinet.com
Timeless Mesh Radio Technology
1
MultiChannel Technology: Integrating Wireless & IP Technologies
6. Sunset Technologies
Since the Federal Communications Commission (FCC), an independent U.S. government agency,
established the Sunset Clause for Advanced Mobile Phone System (AMPS) Cellular Network in February
2008, most people in the security field know that cellular technologies phase outs could strike at any
time and have a significant impact on the alarm monitoring industry. There is uncertainty as to specifically
when, causing alarm dealers to think about how they will plan and implement a new alternative wireless
communications solution in the time remaining before the termination. It is happening again and, to make
matters worse, the cycles are getting shorter and shorter combined with the service deterioration—
making it a major factor for alarm communications.
POTENTIAL PARTNER TECHNOLOGIES
Even though AES-IntelliNet has never actually been affected by any of the above issues, AES strives to
get as near to a perfect protection as technologically possible. As a result, all alternative transmission
methods were evaluated to see which would:
a) Enhance AES-IntelliNet performance
b) Optimize transmission times
c) Overcome weaknesses affecting RF technologies
The choice of potential ‘partner’ technologies is limited since the most reliable standard connection
method—POTS or PSTN—is in sunset mode and has disappeared in many parts of the world.
What is left?
1. Leased Lines
In some areas, even though PSTN has been disconnected or is expecting to be disconnected, direct
connections are still available via copper or fiber optics. Both are excellent from a security point of view,
but they are not universally available. AES-IntelliNet is deployed in over 85 countries around the world, so
its technology needs to retain a high level of flexibility.
2. Cellular Communication
The first problem with using what is basically the replacement of PSTN is that it continues to change.
Since the inception of what would simply be described as portable radio phone technology in the late
1980s, there have been at least twelve technologies or roughly one new one every three years.
AES-IntelliNet is still the same after 39 years. In addition to constant change in the technology,
jamming equipment is far too readily available for cellular communication.
3. Internet Protocol (IP) Connections
Whether peer-to-peer connections are used (sometimes referred to as “working in the background”) or
if the connection is made via a hosting server, this connectivity usually belongs to an internet service
provider who is generating revenue. The first connection is preferable since the third-party element is
considerably reduced due to IP addresses being unknown to third-parties and disguised “geographically.”
Internet protocol is supported over multiple media, such as cable, phone lines, fiber, power and wireless.
It allows communication between desktop computers, laptops, portable phones, networks, appliances
or any other IP capable device. This capability of communication between simple devices is now being
referred to as M2M (machine to machine), also known as the “internet of things.”
THE SELECTED TECHNOLOGY
After evaluation, it was decided that IP was the best secondary mode to adopt. As a result, AES-IntelliNet
has made the incorporation of an IP connection virtually seamless.
1-978-535-7310
www.aes-intellinet.com
Timeless Mesh Radio Technology
2
MultiChannel Technology: Integrating Wireless & IP Technologies
IP has been available for some time, but only recently has it achieved a level of reliability and cost point
that justifies its integration into the alarm industry. Its ease of understanding and critical mass from a
technical and market point of view, plus its secure communication methods make it a suitable partner
to the alarm industry. However, IP alone is not 100% reliable and that is we designed the multichannel
technology. Radio is the dedicated path for critical emergency issues. IP becomes the redundant path
for high volume data transfer and non critical security operations. If the PSTN is still there, our system
leverages its presence to utilize three separate technologies with multiple paths.
AES-IntelliNet timeless mesh radio technology is proven to be the most effective solution for the alarm
industry. It delivers reliable, long-range communication between the protected premise and monitoring
service. It is also scalable, sustainable, and easy to manage with no worries about technology
obsolescence or costly upgrades. AES-IntelliNet technology provides a dealer-owned private radio
network that secures the wireless mesh communications which businesses in the Fire and Life Safety
market rely on.
AES engineered a technology that is reliable and will remain available for years to come. In the same
manner that AES RF technology is tailored to the alarm industry to prevent the cellular sunset factor, AES
has researched and developed the same breakthrough with IP technology.
EXISTING AES FAMILY OF RADIO-BASED PRODUCTS
Building upon the current suite of subscribers, AES has several wireless and IP product options that
enhance the modularity of the system and the ease of connection. This ease of connectivity, and other
innate advantages of using a wireless mesh network noted below, make AES-IntelliNet the most powerful
alarm communication tool available.
• True dual routing of any alarm messages, defaulting to radio, then IP
• Faster check-in times, without causing unnecessary wireless traffic
• Separation of technical monitoring and true alarm messages for maximum speed
• Ability to communicate with and remotely administer an ever growing list of alarm panels
and other devices
• Provision of facilities for end users to remotely monitor and control their sites from any
iPhone or Android smartphone
• Panels and subscriber units do not have to be hardwired with the Wi-Fi panel connector
The messages and how their routing is handled are totally programmable according to local or client
requirements. For example, if check-ins are needed more frequently, or open and closing peaks are
expected, these can be done via IP. This leaves the wireless channels free for actual alarms to arrive at
the highest speed possible.
AES Corporation has always prided itself in leading the field and the new dual technology is no exception.
Adding full IP capability to existing two-way radio networks with radio subscriber products necessitated
that legacy systems could (1) be upgraded with ease and (2) evolve into dual technology systems.
AES SUITE OF IP SOLUTIONS
At AES, we listen to the alarm industry around the world. The main requirements are: seamless
integration, same features as using PSTN, enhanced customer experience, ease of installation, expanded
security features, and low cost.
We created a suite of solutions that addresses all the main requirements and more.
1. IP Alarm Delivery
It is easy to make the analogy between the IP alarm delivery and the PSTN alarm delivery. However,
1-978-535-7310
www.aes-intellinet.com
Timeless Mesh Radio Technology
3
MultiChannel Technology: Integrating Wireless & IP Technologies
creating a solution that does not require the installer to be an “IT expert” was one of the main goals.
Our current solutions integrate into any existing IP network in a manner that NO RECONFIGURATION
is needed on the internet settings at the customer premises, and, if the customer changes its service
provider, the AES solution can adjust to it without any disruption. Its installation is simple: if the customer
can surf the web, our solution works right away. In addition, IP provides a capability that the PSTN never
offered: a high rate check-in. The IP Alarm Delivery integrates into the AES-IntelliNet system without any
modification on the AES receivers.
2. Remote Upload/Download without replacing panel
One of the main reasons phone lines are still used for the alarm industry is to allow remote configuration of
the panels. At AES we created the Modem over IP (MoIP) solution, allowing a 100% seamless integration
of the existing alarm panels and the central station programming applications. Our “IP modem” integrates
with the existing software like it was a PSTN modem, and the MoIP concept handles the communication
between the subscriber module and the IP modem. We currently support major manufacturer’s panels
and software—and the list keeps on growing.
3. AES-InterActive
End users are getting used to having Apps to help them with daily life and business. This market trend
has prompted the need for remote monitoring and control of protected sites. To meet this need,
AES-IntelliNet now offers AES-InterActive security service for iPhones and Android devices. Via our secure
site servers, clients can have the control and confidence they deserve. With AES-InterActive, users can
disable the alarm to allow service technicians, children, or even utility meter readers access, or update
the system’s password without having to visit the location. The possibilities of interactive services are very
flexible and the level of control will continue to grow.
4. AES IP Capable Subscribers
The option of upgrading the existing radio network to have IP capable RF units has also been addressed.
Our current IP solution can be integrated into any existing AES RF network. In addition, it allows
automatic field updates and features activation/deactivation capabilities, ensuring any new feature can be
controlled remotely.
5. Wireless Data Link
Sometimes, especially in residential and office environments, running a data cable between the AES
subscriber and the data modem is not possible either because of physical limitations or aesthetic reasons.
No problem. AES now offers a wireless data link connecting the data modem to the AES subscriber
wirelessly, up to 60 feet inside a building.
CONTACT US
AES is dedicated to providing communications solutions to the alarm industry. To learn more about how
AES is expanding our suite of products with Wireless and IP together working harmoniously with one
another, please contact:
Martin Tee
Regional Director EMEA, CIS and Russia
Telephone 0032 498 810 421Skype teemartin
1-978-535-7310
www.aes-intellinet.com
Timeless Mesh Radio Technology
4
Alarm Panel Upload/Download:
A Universal Internet-Based Solution
Without Telephone Lines
Without GSM
A Primer on a
New AES Technology for the Alarm Industry:
Modem over Internet Protocol
“MoIP”
285 Newbury Street • Peabody, MA 01960 USA
Tel 978-535-7310 • www.aes-intellinet.com
April 2013
Modem over IP: Legacy Alarm Panel Downloading Over the Internet
Key Benefits of the New AES MoIP Technology






Residential and Commercial Burglary Applications
Eliminates Telephone Lines
Eliminates GSM and Avoids Future GSM Sunset Costs
Uses Existing Upload/Download Hardware and Software
Uses Existing Alarm Panels
No Problems with Voice over Internet Protocol (VoIP)
Modem
Upload/Download
Using TCP/IP
Communications
The new AES Modem
over Internet Protocol
(MoIP) solution
combines AES-IntelliNet
mesh radio technology
for delivery of alarm
and other critical
signals, plus full alarm
panel upload/download
via internet.
At the
Alarm Dealer
Location:
The AES 7205 PC-MoIP
is used at the central
station. Using this unique system, central station operators use the same PC, running the same
upload/download application as they have in the past—no re-training. The 7205 PC-MoIP
connects just like a normal modem, but there is no phone line—just the internet.
At the Customer Location:
The AES 7667 AP-MoIPs are alarm panel interfaces to new or existing AES radio security
subscriber units. These new modules enable upload/download of full panel configuration,
event logs, panel control, or any other operation that can be done via the phone line…but
without the phone line! Traditional copper lines are going away and Voice over Internet
Protocol (VoIP) lines are problematic with many legacy alarm panels. AES MoIP technology
solves all of these issues.
www.aes-intellinet.com
Modem over IP: Legacy Alarm Panel Downloading Over the Internet
How Data Moves Through the System
The AES 7667 AP-MoIP module interfaces with the alarm panel via its dialer output. The
module is housed and powered by the AES subscriber unit, which connects to the operator’s
AES mesh network.
 Alarm Signals, including CID, Bosch Modem, or pulse format, are sent from the Alarm Panel
(AP) to the AES receiver.
 Panel Uploads/Downloads are accomplished using AES MoIP technology over an
internet connection.
How the MoIP
System Works
The 7205 (PC-MoIP)
becomes another
modem for the
existing upload/
download PC;
there is no need to
replace the current
system! The
operator of the
upload/ download
program selects a
panel and clicks on
Connect; then the
MoIP system
converts the phone
number to a MAC
address in the AES
alarm panel
interface (AP-MoIP). Using its full PTSN ability, the AP-MoIP “rings” the panel. The panel
“picks up” and sends back a "connection successful" message to both the PC-MoIP and the
upload/ download application. The data that would normally be sent from the upload/
download application to the Alarm Panel over modem through the Public Switched Telephone
Service (PTSN) is now sent through the MoIP solution over TCP/IP.
Compatibility
The AES MoIP technology is compatible with many brands. It is also backward compatible for
use with legacy alarm panels and legacy download software, including:
• Honeywell, Vista using Compass application;
• DSC using DLS application;
• Interlogix/UTC using DL900 or Enterprise application;
• Bosch using the RPS application;
• Napco using the Quickloader application.
www.aes-intellinet.com
Modem over IP: Legacy Alarm Panel Downloading Over the Internet
Frequently Asked Questions (FAQs)
Q: Does this system enable me to re-establish upload/download capability with a customer
who has discontinued their POTS telephone line?
A: Yes! As long as the location has internet access, the AES MoIP technology will re-connect
you for uploading/downloading of that customer’s alarm panel.
Q: Can I use my existing up/download software?
A: Yes! The same software and PC hardware is used. You will install the AES 7205 PC-MoIP
in place of the existing modem. Even if you have multiple modems from different
manufacturers, one 7205 replaces them all.
Q: Can I use my existing alarm panels?
A: Yes! Instead of connecting the panel’s dialer output to a telephone line, you will connect it
to an AES 7667 “AP-MoIP” interface. This device emulates a telephone line to communicate
to the panel, and links to local LAN for internet access.
Q: Will this work with my customer’s internet connection?
A: Yes! No special programming is needed. Simply connect the AES AP-MoIP to the
customer’s internet enabled router.
Q: My customer’s records are in my download software, including their telephone number.
So if there’s no phone line, how does the software communicate with that customer’s
alarm panel?
A: Excellent Question! The AES 7205 PC-MoIP includes translation software that you match
up the old telephone number with a MAC address on the AP-MoIP. When the PC-MoIP
detects the software “dialing” that number, it converts it to a MAC address and establishes a
connection to the AP-MoIP and the alarm panel at that location.
Please Join Us!
AES is dedicated to providing communications solutions to the alarm industry. The AES
MoIP product group has successfully completed the engineering phase; we are seeking
leading partners from the industry to try out this new technology. To be considered for this
opportunity, please contact Tom Kenty at AES Corporation, telephone (978) 535-7310, x109
or email tkenty@aes-intellinet.com.
www.aes-intellinet.com
Interactive Security Services for AES-IntelliNet
End-User Features
• Dealer-branded secure web portal
AES’s new interactive products combine IntelliNet mesh
radio technology for delivery of alarm and other critical
signals, plus Interactive Services delivered via high-speed
Internet. The result is the highest reliability and speed of
operation, plus the certainty that the communication
technologies will never become obsolete.
IntelliNet Mesh Radio Offers the Highest Reliability
for Critical Event Signal Delivery
• AES Virtual Keypad enables full remote
keypad operation through secure web
portal and smartphone
• Check status of system and arm system –
home, away, instant
• Bypass zones
• Silence alarms and/or disarm system
• Access keypad programming mode to
make changes at any time from any place
• View event log and receive event
notifications via SMS and/or email
• Manage multiple systems such as home
and office from same App
• Dealer owned and maintained radio
network designed exclusively for
critical event signaling
Dealer Features
• No worry of technology sunset as
with cellular alarm transmission
• AES dealers manage end-user interactive
service through secure AES-SiteLink24
web portal
• No worry of network outage
because of bad weather or for
maintenance as with cellular
networks and Internet
• Dealer and user can easily set up
notifications via email and SMS
• No monthly telecommunication fees
• Dealer can make remote programming
changes through Virtual Keypad
• Supports multiple alarm panel brands
◊ Honeywell Vista
◊ First Alert
◊ DSC Power Series
◊ GE NetworX NX Series
• Service enables remote upload/download
to Vista panels using Compass
Smartphone
Any Personal Computer with Internet access
Dealer-Branded End-User Portal
Your customers access AES-SiteLink24’s secure hosted services platform
through a dedicated, dealer-branded web portal – including your logo and
contact information via a link off of your website.
AES SiteLink24 Dealer Portal – Account Activation and Management
Account set up includes an automated validation initiated by the host of the
user’s email and cell phone number for notifications.
Wireless mesh networking is an innovative
technology adopted by many industries with
applications that need to communicate data
over a large geographic area with a high level
of reliability at a low total cost of ownership.
The advanced design and 2-way
communications capability provides easy
installation, expansion, and management
when compared to alternative communication
methods, both wired and wireless.
AES-IntelliNet Interactive Products
How to Order
For New Systems
7058-IPD1
Add SiteLink 24 Interactive Services to Existing AES Subscribers –
7659-IPD1-R Module
AES-IntelliNet’s new interactive products combine IntelliNet mesh radio technology
for delivery of alarm and other critical signals plus SiteLink24 Interactive Security
Services delivered via high speed internet. The result is unmatched reliability and
technological consistency since both AES-IntelliNet and the Internet are not subject
to the forced technology sunsets and costly forced upgraded every x number of
years like cellular-based services.
AES-IntelliNet dealers never need to worry about technology sunsets or cellular
outages or uncontrollable third party service charges when it comes to job ONE –
delivering fast and reliable alarm signals. Now, with SiteLink24 Interactive services,
IntelliNet dealers can also offer fast and secure remote control with the mobility
that users demand in today’s world.
Customer Management
Model
Description
7058-IPD1
8 Zone Security Subscriber
with Interactive-enabled full
data module
7659-IPD1-R Interactive-enabled full data
module for use with
AES‑IntelliNet 7058E,
7450XL, 7050E
Compatible Alarm Panels
Ademco and Honeywell
(ECP MODE, Fully-Supervised)
Vista 10P / 10PSIA / 128BP / 128BPE
128FB / 128FBP / 128FBPE / 128SIA
15 / 15CN / 15P / 15PCN / 15PSIA
20P / 20PCN / 20PI / 20PS / 20PSIA
21IP / 21IPSIA / 32FB
First Alert FA130 / FA148 / FA168
ADT Safewatch Pro 3000/3000EN
DSC Power Series PC1616 / PC1832 / PC1864
Alexor (mobile app not supported)
UTC (GE) NetworX NX-4V2 / NX-6V2 / NX-8V2
ISS-2000
Dealer Account Management
AES SiteLink24 Interactive
Security Services with
Notifications
Optional Accessories
1640
Plug-in Transformer 16.5VAC,
40VA
7041E
Subscriber Handheld
Programmer
AES-IntelliNet™ is the industry leader in delivering high quality wireless mesh networks to the fire and
security industry in commercial, corporate, government, and educational applications with its broad line
of products and advanced network management tools. Users of AES-IntelliNet networks have gained
significant revenue, communications, and cost advantages while meeting the high standards of reliability
required for the fire and security industry. AES-IntelliNet alarm monitoring systems are deployed at
hundreds of thousands of locations in over 80 countries.
For more information
Call 800-AES-NETS (800-237-6387)
AES Corporation | 285 Newbury Street | Peabody, MA 01960 USA
Tel. +1 978-535-7310 | Fax +1 978-535-7313
Email info@aes-intellinet.com | Web www.aes-intellinet.com
Copyright 2013 AES Corporation
AES-IntelliNet and SiteLink24 are
registered trademarks of AES Corporation
SiteLink24/5/13/R5-A4
!
NEW
P
7680-P
R
E
L
I
M
I
N
A
R
Y
Wireless Data Link
Technical Specifications
Ready to Use
Pre-Programmed
The AES 7680 Wireless Data Link replaces an Ethernet cable,
minimizing installation time and costs.
• Fast, Easy, Wireless Alternative to LAN Cable!
• Reduces Labor Cost and Saves Time!
• No wires to pull, no holes to drill/fill, no raceways to hang!
• Supplied in matched pairs, ready to go: modules sync up quickly and automatically.
• Perfect complement to install Internet-connected accessories like the AES-InterActive modules.
Base Configuration / Matched Set
• Ready to Use
• No Programming Needed!
Connectors
• RJ45 Port
• MINI USB Port for Power
Antenna
• Built-in Omni Directional Antenna
Switch
• Reset Button
Power Adapter
• DC 5V / 500MA
Range
• Up to 50 feet / 16 meters
Operating Environment
Operating Temperature: 0°C - 40°C
Storage Temperature: -40°C - 70°C
Operating Humidity: 10% - 90% RH non-condensing
How to Order
Data
Data
Internet
Up To 50 Ft
Router
Power
AES RF
Subcriber
Power
7680-P
Sold in ready-to-use sets with
everything needed:
2 - Preconfigured 7680 modules
2 - Power Cables (3 ft)
2 - RJ45 Data Cables (3 ft)
1 - 110-220V 5VDC Power Adapter
Options
7680-A Extra Power Adapter
The thumb-sized modules are used in place of an Ethernet cable to connect any
IP device to an existing LAN. Connect your alarm panel accessory or other
internet device to the router without wires. This reduces the cost of drilling,
pulling, and patching, plus minimizes any interruption on the customer premises.
For more information
Call 800-AES-NETS (800-237-6387)
AES Corporation | 285 Newbury Street | Peabody, MA 01960 USA
Tel. +1 978-535-7310 | Fax +1 978-535-7313
Email info@aes-intellinet.com | Web www.aes-intellinet.com
Copyright 2013 AES Corporation
AES-Intelli Net is a registered trademark of AES Corporation
7680PRELIM/5/13/R2-A4
NEW
TM
AES-BH1 IntelliVu
Long-Range Wireless Transmission Link
Specifications
Overview
The innovative AESIntelliVu BH1 is a multi-mode, long-range wireless
transmission solution for use with voice, data and video for Security
and CCTV applications. It utilizes the latest Intel ® RCP technology to
provide an easily deployed and affordable long-range wireless link.
The AES BH1 supports high bandwidth applications for up to 50 km
range for outdoor applications using its highly efficient 30dB grid
antenna.
•
•
•
•
•
•
•
Flexible Utilization
•
It can be used as a long-range wireless pipeline and via its
shorter range companion product, (the
AES BH4) with multiple IP cameras or
IP encoder input points, and of course
an AES-IntelliNet alarm transmission
'pipeline' in association with AES 7170
IP Link Remote Receiver.
•
•
•
•
•
•
Flexible Deployment
• Long-Range Point-to-Point – To
communicate to another BH1, simply
plug in the supplied PoE mains
adapter and connect an IP camera,
IP Encoder, Router or AES BH4 shorter
range transmission link via a Cat 5 cable and in seconds
you will be able to transmit and receive.
• Sequentially – By deploying BH1s back-to-back, single point or
multipoint clusters can be sent over multiple 50 km 'hops' or to circumvent 'line of sight' obstacles and/or to increase the network’s
range.
Long-Range CCTV Networks
AES BH1s can accept local mesh element clusters of the shorter
range AES IntelliVu BH4 Transmission Links and/or transmit hundreds
of cameras, VoIP or other data devices up to 50km away.
AES Corporation | 285 Newbury Street | Peabody, MA 01960 USA
Call 800-AES-NETS (800-237-6387) or +1 978-535-7310 | Fax +1 978-535-7313
Email info@aes-intellinet.com | Web www.aes-intellinet.com
•
•
•
•
•
•
•
8.2.11a Wi-Fi Compliant
Level 7 Waterproof
Level 17 Beaufort Scale
Sensitivity <-90dBm@6Mbps; <-73dBm
@ 54 Mbps
Range of 40km-50km
Power Over Ethernet (PoE) 20 Watts
Output, 48V/0.4A via supplied universal
power supply
Frequency CE 5.470-5.600, 5.650-5.725
GHz, FCC 5.400-5.850 GHz
Supplied in pairs or individually with all
necessary accessories to plug n’ play
Easy setup with intuitive software
320x320x18 mm Antenna Dimensions
160 x 135 mm Enclosure Dimensions /
2.4 KgP
Compact elegant high impact weather
resistant die cast IP67 compliant housing
Pole mount or surface mount (hardware
supplied)
High Output Power: FCC 24dBm;
– CE 30dBm; adjusts output automatically to environment
N-type connector for antenna inputs
Optional high gain dipole available for
even greater transmission distances
Advanced encryption: WPA/WPA-PSK,
WPA2/WPA2-PSK, 64/128/152 bits WEP
Compliant with ETSI 301 893, EN 301
489-1/17 Class A, EN 60959 FCC 15B
part A & 15C
Built-in watchdogs and software
(Programming CD Rom supplied)
Telnet, TFTP, FTP, SNMPv3 supported
Operating temperature: -30°C~70°C
humidity 10-95%
TM
AES-BH1 IntelliVu
Long-Range Wireless Transmission Link
Meets Many Challenges
• Outdoor Deployments –When used as a video or data access
point, due to its IP67 casing specification, it can be deployed outdoors
• Several antenna options including high performance 30dB grid antenna (BH-ANT-30
not included)
• Omni-Directional dish multi-polarized
(Shown below)
• Wireless Mesh – It can be used to create a powerful wireless CCTV mesh network
• Last Mile Connectivity – It can receive wireless
signals over the ‘last mile’, enabling security
CCTV systems in locations or applications where
wired IP or conventional CAT5 or Coax is not
possible or desired.
Internationally Approved Frequencies
The easy-to-install AESIntelliVu BH1 uses
Internationally recognized 5.xGHz frequency bands, which feature outstanding throughput and bandwidth performance which combined with our cost-effective design, allows users to have the highly
reliable indoor/outdoor equipment at less than conventional cabling
costs.
AES-BH ANT - 30 grid antenna
Easy to Install and Operate
The BH1 comes complete and ready to install. It has a universal mains
adapter in the box. The software for set-up and deployment is included
too, with flexible programming options including manual or automatic
IP address generation and secure password protection. Once installed
with the provided pipe mounting kit it can be adjusted using the simple
installation software package to provide optimum performance and via
its encryption algorithms (WEP TKIP & AES) absolute security of information passed.
AES Corporation | 285 Newbury Street | Peabody, MA 01960 USA
Tel. +1 978-535-7310 | Fax +1 978-535-7313 | Email info@aes-intellinet.com
Web www.aes-intellinet.com
Copyright 2011 AES Corporation
AES-IntelliNet is a registered trademark of AES
Corporation BH1/11/06
NEW
TM
AES-BH4 IntelliVu
Short-to-Medium Range Wireless Transmission Link
Overview
The innovative AES IntelliVu BH4 is a multi-mode wireless transmission solution for use with voice, data and video for Security and
CCTV applications. Because it complies with the International
IEEE802.11n standard with a variable power output, the BH4 supports longer range higher bandwidth applications than traditional 802.11/WiFi. In fact it can go up to 4000 meters indoors
or outdoors, using its highly efficient built-in antenna or
even longer range, using an optional external antenna.
Flexible Utilization
It can be used as a IP camera or IP encoder input point or
for VoIP, and of course as an AESIntelliNet long-range
mesh radio alarm transmission 'pipeline' in association with
an AES 7170 IP Link Remote Transceiver.
Flexible Deployment
• Point-to-Point – To communicate between BH4 units,
simply plug in the supplied PoE mains adapter and connect an IP camera, IP encoder or router via a Cat 5 cable
and it operates within seconds.
• Point-to-Multipoint – To communicate between multiple BH4s to a
centralized BH4 used as a collector.
• Sequentially – By deploying BH4s back-to-back, single point or
multipoint clusters can be sent over multiple 4 km 'hops' or to circumvent 'line of sight' obstacles and/or to increase the network’s
range.
Long-Range CCTV Networks
To further enhance the range of the wireless network there are 2
options:
1.Use an optional external high gain dipole antenna connected either
directly or via an appropriate coaxial cable to the BH4 antenna
receptacle on the top of the unit
2. Utilize the very long range wireless transmission link, the AES BH1
as a means to transmit hundreds of cameras, VoIP or other data
devices some 10-15 times the range of the BH4.
AES Corporation | 285 Newbury Street | Peabody, MA 01960 USA
Call 800-AES-NETS (800-237-6387) or +1 978-535-7310 | Fax +1 978-535-7313 |
Email info@aes-intellinet.com
Web www.aes-intellinet.com
Specifications
• Supplied individually or in pairs with necessary accessories to allow Plug-n-Play
• Easy setup with intuitive software and
simple LED performance indicators
• 1 Amp max -12V DC operation via supplied PoE adapter and universal power
supply
• 180 x 88 x 80 mm dimensions and
1200gms supplied in shipping cartons
• Compact elegant high impact weather
resistant ABS IP66 housing
• Pole mount or surface mount (hardware
supplied)
• Compliant with 802.11n
• Compliant with IP65 Standard
• High Output Power: 27.5dBm adjusts
output automatically to environment
• Built-in 8 dBi directional antenna with an
N-type connector for omni-directional
and higher gain antennas
• Optional high gain dipole available for
even greater transmission distances
• Advanced encryption: WPA/WPA-PSK,
WPA2/WPA2-PSK, 64/128/152 bits WEP
• Flexible deployment by PoE (Power over
Ethernet)
• Selectable AP mode / Bridge mode
• Built-in watch dogs and software
(Programming CD ROM supplied)
• Telnet, TFTP, FTP, SNMPv3 supported
• Operating temperature: -20°C~70°C
• Power 110/220V Power Supply
• Data Rate 1M-54Mbps, range dependent
• Range: Maximum 4km working distance
• LED Indicators
AES-BH4 IntelliVu
Short-to-Medium Range Wireless Transmission Link
Meets Many Challenges
• Outdoor Deployments – When used as a video or data access
point, due to its IP66 casing specification, it can be deployed outdoors
• Wireless Mesh – It can be used to create a powerful wireless CCTV
mesh network
• Last Mile Connectivity – It can receive wireless signals over the
‘last mile’, enabling security CCTV systems in locations or applications where wired IP or conventional CAT5 or Coax are not possible/desired.
Specifications (cont’d)
• Power
• Green On: Power/System On
• Green Off: Power/System Off
• Amber Blinking: Device Initializing
• LAN
• LED Off: Ethernet connection not detected
• Green On: Ethernet connection detected
• Blinking Green: Sending/receiving data
• WLAN (AP Mode)
Internationally Approved Frequencies
The easy-to-install AESIntelliVu BH4 uses Internationally recognized
2.4GHz frequency bands, which feature outstanding throughput and
bandwidth performance which combined with our cost-effective design,
allows users to have the highly reliable indoor/outdoor equipment at
less than conventional cabling costs.
Easy to Install and Operate
The AES BH4 comes complete and ready to install. It comes with a
universal mains adapter and PoE adapter. The software for set-up and
deployment included provides flexible programming options including
manual or automatic IP address generation and secure password protection. Once installed with the provided pipe mounting kit, it can be
adjusted using the simple tell-tale LEDS on the side of the casing.
Green indicates “Good”. Yellow indicated there is a signal but it could
benefit from adjusting. And Red means “Out of Range”.
• Green Off: WLAN Disabled
• Green Blinking: WLAN Activity
• WLAN (Client Mode)
• All Off: WLAN Disabled
• Green Blinking: Good Signal Quality
• Yellow Blinking: Marginally Acceptable
Signal Quality
• Red Blinking: Bad Quality
Affordable
The AES BH4 is priced to provide a very affordable alternative for short
to medium to long range broadband wireless transmission systems
required by the security industry.
AES Corporation | 285 Newbury Street | Peabody, MA 01960 USA
Tel. +1 978-535-7310 | Fax +1 978-535-7313 | Email info@aes-intellinet.com
Web www.aes-intellinet.com
Copyright 2011 AES Corporation
AES-IntelliNet is a registered trademark of AES
Corporation BH4/11/05