With rear wheels that would shame a steamroller and a
Transcription
With rear wheels that would shame a steamroller and a
Y H T A P SYM STORY BORIS VISKOVI C PHOTOS JORDAN LEIST roller and a bombproof With rear wheels that would shame a steam 0hp, Kynan Hall’s evil blown 526ci big-block good for at least 220 t big guns XC coupe is ready to mix it with the burnou 034 STREET MACHINE STREET MACHINE 035 K burnout pad for a YNAN Hall hasn’t been near a low while he put g layin couple of years. He’s been the guys at the to it take to car new a together ght – this is not strai thing highest level. Let’s get one job. Apart from t pain new a with car blue Kynan’s old skid car was ious prev his the fact this is an XC and between the es renc diffe few a quite are an XB, there engines Ford n blow with coupes, two. Yep, they’re both big ol’ Falcon s end. aritie simil the re whe t abou s that’ and big billet wheels, but to go down the blown route. Kynan remembers how he decided ogin Revheads with a mate Narr at n dow “I started doing burnouts early 2000s,” he says. “We got of mine, Dave Morgan, back in the e has changed. Back in those “It’s amazing how much this scen r cars that were blown.” othe days there were only two or three since those days, and that’s bit a on ed mov itely Things have defin a new car just for the build to part of the reason Kynan decided of the pack with his d ahea was he t poin one burnout comps. At t car, but people stree a ly ntial tough blown combo in what is esse ers got bigger and blow and nes engi as him ed caught up and pass cornered the market on Big & Ugly the West Aussie burnout scene injector hats. king the car and I didn’t want “It got to a point where I was wrec says. “When you’ve got guys like to keep doing that to it,” Kynan quality show cars that do high-end Loader and Nogas building top- s changed. A decade ha e en sc t ou rn bu e th h uc m w It’s amazing ho rs that were blown ca r he ot e re th or o tw ly on re we ago there be. I was able to be a part of that burnouts, that’s where I wanted to that t putting a blower on an XD talking one day and thought abou to another and Dave said: ‘Why led we were going to do. One thing [XB] coupe?’ I said: ‘Nah, it’s too don’t you put the blower on the : ‘It’s just a bonnet.’ I thought, well, nice, I’m not doing that.’ Dave goes how it came about. s that’ So . there t you’ve got a poin the engine up because I had the “The first time I took it out I blew I and overdrove the crap out of it. pulleys around the wrong way – that’s and ne engi an build to eone went on the hunt looking for som something I could drive on the when I met John Napier. I wanted r engine builders said it couldn’t street and do skids with. All the othe said: ‘Yep, we can do that, no he , John d aske I n be done but whe Revheads in 2006 and that re befo worries.’ That was three weeks g. stron g motor is still goin e, but there came a point where for a brief period with the other coup dy had the engine, I just needed everyone just went past me. I alrea ” in. to find something to put it her Falcon coupe, of course – Kynan knew what he wanted – anot ed off with a different body, start ally actu he just had to find one. He and it would have taken a lot of but it turned out it was pretty rusty another came up for sale on ily, Luck tch. work to get it up to scra minus engine and box – that was the east coast, a complete car – t in pretty good nick. Well, it mus be to ed already tubbed and look was it n whe ’09, Feb , SM red it in have been okay, because we featu n struck the deal, hooked up owned by Shane Etherington. Kyna country to get it. Yep, keen as! the car trailer and drove across the EXTE RIOR Shaved door handles, drip rails and bumper bolts made for a smooth ne canvas to lay down the Brandywi it’s Kandy. It’s over a black base, so then pretty dark until the lights hit it, it really pops! 036 STREET MACHINE INTE RIOR Two-tone leather interior is all class, although it will probably be a nightmare to keep clean once the dash is burnout comps begin! The filled es an interesting feature with the gaug now located in the centre console STREET MACHINE 037 ved and Brandywine ’t long before Owen Webb got invol had a motor lined up, and It wasn the new hue. Charlie as ted selec was base As mentioned earlier, Kynan already black a y over s can put down your pitchforks Kand out his fingerprints as he spent not just any motor. All you Ford lover c Takacs was the man wearing cubi 526 all , Ford all is it but s and painting, and although – this baby may have Hemi head some 300 hours doing the bodywork ex-Pro Mod motor an is half m botto the still a few extra touches hell, were nuts a there In inches of it. pretty good to start with, of John’s old funny cars. The it was up. while the blower and hat are off one it d to clean ewhere between 2200 and adde a few bars were removed combo is probably capable of som Bumper bolts were smoothed off and ing push be ’t won they usly obvio user-friendly. The engine more little a it make to 2500hp according to John, but age in it, this thing will out of the rollc tune st softe d’s custom boot hinges worl and the with filled s Even it that hard. bay had any unnecessary hole tubs, as the car had be making well over 1000hp! cated to work around the existing big-block, there was were fabri ng Raci Ford inium alum an nd Based arou iously had a lift-off boot. it came time to order the parts. prev ior either; Kynan took the absolutely no stuffing around when e is nothing left of the original inter Ther a with off s start d and forge is stuff ing and let them loose. The rotat ers the of Trimm r all Of course, down to Southside Moto and a set of pistons that set car Bryant stroker crank, Brooks ally rods , but even with the world’s hp 00 -25 00 22 of ble pa ca is o mb The co making well over 1000hp be ll wi ng thi s thi it, in e tun st fte so n with a filled dash and custom result is a classy leather-lined cabi Yes, you read that right. the static compression at 12.5:1. with titanium valves and the filled are s head i Hem The EPD re hat get busy pouring in onfib carb 16/71 Kobelco blower and r will be sucking it down big the methanol, and no doubt this moto custom-built 150-litre fuel a ’s there time. Not to worry though, . cell in the boot of holding the horsepower Finding a gearbox that was capable n at it was no easy task. JW – and abuse – that will be throw US supplied one of their full the in Performance Transmissions s are bombproof and are race-spec Powerglides. These thing also supplied the adapter JW hp. capable of withstanding 3000 has been built with ultimate and converter, so the entire driveline not cheap, but neither is it’s No, . strength and reliability in mind you hit the burnout pad. blowing up your gearbox every time ld have been to slot all that wou car The easy option with this ed, painted and leathertubb dy alrea the into gear killer running lem – the colour. It prob l smal a trimmed body. But there was it didn’t seem to grow on him wasn’t a favourite of Kynan’s and l & Paint for a colour change. Pane with time, so it was off to ITP the Dakota Digital gauges. centre console that now houses ly with the luxurious Billet stark A TCI Outlaw shifter contrasts l, yet somehow, it all seems to Specialties Outlaw steering whee “John reckons they’re to catch s? seat work. And those holes in the for the first time,” Kynan jokes. all the poo once I put my foot down is in-yer-face and the wheels car this Just about everything on as big as you can get – most are no exception. They are about .5 rim on the back of their car, 20x8 a people would be happy to run Out back are ridiculously up! front the ing hold is what but that’s Pirelli make, a 405/25 er rubb st huge 24x17s with the wide fit in the tubs no worries, PZero Nero. The good news is, they overall diameter is around the ntic, because although they are giga as a 16-inch-wide Mickey 32 inches, which is about the same Thompson Sportsman Pro. building burnout cars to this It’s pretty insane that people are read this, the XC should you time level, but we love it. By the Good Friday burnout comp at have blown some tyres off at the already seen the video. s ably the Motorplex and you’ve prob REA R ENG INE ive Intro It’s a Hot Wheels car come to life. Mass 20x8.5 up Malibus are 24x17 out the back and will handle front. A Mark Williams 9.5-inch diff front end the power no worries, while the RRS motor and allowed enough room to fit the giant r-assisted pipes with the added bonus of powe rack-and-pinion steering. Luxury! If the engine looks like it belongs in a drag car, that’s because it does! It’s an ex-Pro Mod mill put together by John Napier. That Kobelco 16/71 blower has gone 5.90s in one of John’s alcohol funny cars KYNA N HALL XC FALC ON COU PE Paint: HOK Brandywine Kandy DON K Type: 526ci Ford big-block Inlet: EPD blower intake Blower: Kobelco 16/71 Heads: EPD Racing Valves: Titanium Cam: Crower solid roller Pistons: Forged, 12.5:1 Crank: Bryant Conrods: Brooks aluminium Radiator: Brown’s aluminium double-flow Exhaust: 2.25in primaries, twin 4in pipes Ignition: MSD 12A magneto Sport 245/30ZR20 (f), Pirelli PZero Nero 405/25ZR24 SHIF T THAN KS Box: JW Powerglide Diff: Mark Williams 9.5in, 44-spline, 4.5in tailshaft BEN EATH Front end: RRS coil-over Steering: Power rackand-pinion Brakes: Discs (f & r) ROLLING STOC K Rims: Intro Malibu; 20x8.5 (f), 24x17 (r) Rubber: Achilles ATR John and Debbie Napier; ITP Panel & Paint; Southside Motor Trimmers; Shocking Auto Electrics; Genie Exhaust; SRM; House of Kolor; Steve Loader; Buzzard Fabrication; Russell’s Water Supply; Oz Mining Solutions; my best mate Warney for all his help; Paul Dowsett; my wife Kelly and kids Aiden, Amani and Jorja STREET MACHINE 039