the US Blanks catalog - Foam E-Z

Transcription

October 2014
USBlanks.com
Phone: (310) 225-6774
Fax: (310) 225-6922
info@usblanks.com
WELCOME
Our mission at US Blanks is to establish a close partnership with customers to produce the
best surfboard possible. We are committed to design, technology and to maintaining the
highest level of quality while offering a wide range of products for custom ordered blanks,
including an extensive variety of blank sizes, weights, stringers, rockers and glue colors.
If there is anything we can help you with at any time, please let us know. Our success is measured by our ability to accommodate your needs.
OUR COMPANY
The US Blanks team is comprised of former Clark Foam employees and leaders in the surf
industry, with unparalleled experience in surfboard blank production.
Every blank we manufacture comes from our Southern California facility, making us the only
polyurethane blank manufacturer producing exclusively US made surfboard blanks. Operating in California ensures that we exercise the highest standards in environmental protection
and safety precautions for our entire team. Our location and industry-leading practices allow
us to maintain longevity among staff and clients and provide unmatched customer service.
RECYCLING
US Blanks also proudly maintains a highly prioritized recycling initiative. Our EPS foam scraps
and off-cuts are compacted and melted off-site. They are then recycled for use in a variety
of applications from packaging to construction insulation. Our wood scraps, off-cuts, and
sawdust from stringer production and packaging are reclaimed off-site for use outside of the
surf industry. Our paper, plastic, and metal related to manufacturing, packaging, and office
use is recycled using best practices and local recycling facilities.
BLANK MEASUREMENTS
All blank pictures in this catalog are drawn to the actual scale of the blanks. The wire frame
diagrams are drawn on a scale of 1:12 for blank sizes shorter than 8’0”, and 1:16 for blank
sizes 8’0” and longer.
Actual measurements vary slightly due to the use of mold release, unpredictable shrinkage
during molding, rail fill and rough rails.
The nose and tail rockers are measured from the bottom of the blank to the bottom of the
nose and bottom of the tail.
Volume measurements are also listed for each blank size. These measurements are calculated using the Shape 3D scan method created from each model. Shape 3D and AKU computer
files for each blank size are also available upon request. Please call our office for more details.
2
FOAM SELECTION
Polyurethane (PU)
US Blanks manufactures a water blown, Toluene Diisocyanate based polyester polyurethane
blank. We feel this combination provides the best physical properties required by a surfboard, resulting in the strongest blank possible, and yields the best performance qualities.
The quality, stability, and consistency of a TDI based polyurethane blank has long made it the
choice of the majority of board builders.
While there are many formulations available for a TDI based blank, we believe our formulation provides the optimum strength while maintaining ease of shaping and maximum flex.
We are continuously fine tuning our formulation to supply the shaper with a blank that exceeds industry standards for these characteristics.
To provide a truly custom polyurethane blank, we offer several densities for most blank sizes.
Actual pounds per cubic foot (pcf ) of a given weight foam will vary with blank size due to
mold compaction and skin to core ratio. The comparisons listed are based on the difference
in pounds of foam used to pour each density and is an average among blank sizes.
The density of a blank will be identified by the color of the paint on the nose.
ORANGE (COMPETITION WEIGHT): approximately 12% - 13% lighter than BLUE. Currently
only available in short boards.
RED (PERFORMANCE WEIGHT): approximately 6% - 7% lighter than BLUE.
BLUE (STOCK WEIGHT): considered our stock density and is the basis for comparison.
GREEN (CRUISER WEIGHT): approximately 9% - 10% heavier than BLUE
BROWN (CLASSIC WEIGHT): approximately 30% - 32% heavier than BLUE. These blanks will
be identified with a brown tipped nose.
BLACK (TOW-IN WEIGHT): approximately 205% heavier than BLUE. These blanks will be identified with a black tipped nose.
Expanded Polystyrene (EPS)
US Blanks offers 2 types of surf-formulated EPS foam; Superfused Molded and Block-Cut.
Superfused Molded blanks are available in 13 different sizes, 2 densities (1.7 pcf and 2.0 pcf ),
and several different thicknesses offering the shaper a wide variety of options. The molding
process also provides tighter fusion and cell structure than traditional EPS blanks,
3
process also provides tighter fusion and cell structure than traditional EPS blanks, although
not as tight as traditional PU blanks. Superfused EPS blanks and additional information is
listed on page 70.
Our surf formulated Block-Cut EPS blanks are available in 2 stock densities (1.5 pcf and 2.0
pcf ), with a 3rd (1.0 pcf ) available via custom order. Block-Cut EPS blanks are available in any
range and size up to 16’ long and 4’ wide. Every blank within this catalog is available as BlockCut EPS. Additional stock sizes are listed on page 83. Custom cut files may be submitted in
either Shape 3D or AKU Shaper formats.
colored foam
US Blanks offers colored foam for stringers and full colored foam blanks.
Our colored stringer foam is made in Classic density and is available in stock colors of Blue,
Red, Yellow, Orange, Green (Regular or Fresh), Black, Pink and Gray. We formulate our colors
to be bright and bold. Occasionally we may have additional colors available.
Colored blanks are available for all sizes and all densities on a custom order basis. We offer
colored blanks in the same colors as our stringer foam, and can also formulate any shade of
the stock colors. Custom colors are available for minimum quantity orders. Custom mix-andmatching, configurations, and glue-ups are all available and only limited by one’s creativity.
It may be possible to develop a proprietary custom color. Please contact our office for information.
STRINGER SELECTION
Our in-house mill capabilities allow us to offer nearly any conceivable cut or configuration.
Some limits are set by the length or width of wood available. Our cedar comes 6” wide and
will not fit all rockers, and our plywood has a length limit of 8’1”.
Multi stringers, T-bands, off-set stringers, flares, and wedge cuts are all part of our custom
stringer capability. Again, stringer configuration is only limited by one’s creativity.
Parabolic rail stringer configurations are also available in a variety of different blank sizes.
Our standard parabolic templates can be used in any of our shortboard sizes to suit your
finished board dimensions and requirements. For a list of our template outlines and configurations please refer to the parabolic specification on page 93 of this catalog.
US Blanks currently offers 5 solid woods, various plywoods, and 2 types alternative materials
for stringer selection.
4
Solid Woods
Balsa, Basswood, Dark Wood (Cedar Alternative), Cedar (6” wide and will not fit on all rockers), Old-Growth Redwood.
Plywoods
4mm unidirectional Poplar Ply, High Performance Ply & Team Ply (8’1” length limit). Additionally, our Poplar Ply is also available in 6mm at 10’ length.
Appelcore Stringers are a 3 ply, colored-dyed, basswood stringer available in a wide range
of color combinations. 5-ply (1/4”) and 7-ply (3/8”) are available at 8’, 10’, & 12’. Inquire for
current availability.
Alternatives
PVC is available in red at 3mm and white at 4mm.
Powerline Stringerz are a non-woven polymer laminated into a 4-ply panel. The stringer is
colorless and translucent, but reflects and refracts the color of the glue line thereby allowing a wide variety color options.
ROCKER SELECTION
Everyone knows how important rocker is to the performance of a surfboard. US Blanks
offers custom rockers and private rocker templates.
While our master plugs were designed with a Natural Rocker that fits a variety of designs,
we know that individual style and design will require adjustments.
We use the deck line to adjust rocker, and all adjustments are referenced to the Natural
Rocker. If desired, we can adjust rocker to the bottom. Adjustments can be made from
almost any point on a blank and from one blank size to another. Unless instructed, all
rocker adjustments will be made from the center of the blank. If the adjustment is made
from a point other than center, the adjustment point will be part of the description. Rockers transferred from one blank size to another will require a match point. Radical rocker
adjustments may result in bumps or dips created in the deck line.
Rocker adjustments on Block-Cut EPS blanks may be charged a slight fee, based on complexity of file adjustment required.
QUALITY GUARANTEE
US Blanks guarantees the quality of our blanks. If you receive a blank that does not meet our
quality standards, we will replace the blank. In addition, if that blank has been shaped we
will credit the customer with an additional blank OR a scheduled shaping fee. In order to be
eligible for either credit, the inferior blank must be returned to US Blanks. We will not cover
the costs of any work on the blank completed after the first notice of a problem. Refer to the
US Blanks Sales Policy for specific details.
5
BLANK CODE DESCRIPTION
Call (310) 225-6774 or visit www.usblanks.com
6
5'9"P
Overall Bottom Length: 5'10 1/4" (178.44 cm)
Tip-to-tip Deck Length: 5'9 5/8" (176.85 cm)
ROCKER
"
4 3/4
12.07 cm
THICKNESS
—
"
Maximum Width: 19 3/8"
(49.21 cm)
— 3 1/2 "
13/16
2.06 cm
8.89 cm
Maximum Thickness: 2 7/16"
(6.19 cm)
"
— 1 3/16"
6"
— 9 7/8 "
"
— 1 5/8 "
12 "
— 13 11/16"
Introduced: April 2006
2"
18 "
— 16 7/16 "
Available Rockers:
— 18 3/16"
Natural Rocker 4-3/4"N 2"T
-3/4"T +3/8"T
-1/8"N24"
+1/2"N
+1/4"N
+1/2"T
+3/16"N
+1/4"T24"
+1/4"T18"
+1/4"T
+3/16"N8"
+3/8"N
+3/8"N18"
Parabolic
+3/8"T
+1/2"T
+1/4"T
+1/4"T24"
Natural
+1/4"T
+1/8"T12"
Rocker 5'8" Template
2 3/4
6.99 cm
1 1/2
3.81 cm
3
WIDTH
/4 "
1.91 cm
"
5
/16
0.79 cm
3.02 cm
4.13 cm
—
5.08 cm
— 2 5/16"
5.87 cm
24 "
25.10 cm
34.77 cm
41.75 cm
46.20 cm
Displacement: 1.14 ft³
(32.2 L)
Designer Comments: This is an ideal “Grom” blank
with medium volume. It has an excellent natural
rocker which will also work very well in the 6’0P and
— 2 7/16"
Center
"
— 2 5/16"
24 "
— 18 1/ 2 "
"
— 2 1/16"
18 "
— 17 1/16"
"
— 1 3/4 "
12 "
— 14 13/16 "
"
— 1 3/8 "
6"
— 11 9/16 "
"
—
6.19 cm
1
/4
0.64 cm
1
/2
1.27 cm
13
/16
2.06 cm
1 3/8
3.49 cm
2
5.08 cm
Designed by:
5.87 cm
5.24 cm
4.45 cm
3.49 cm
— 19 3/8 "
49.21 cm
"
15/16
2.38 cm
Timmy Patterson
6’2P matched from the nose. A perfect hand shape
blank that can also be used on the machine.
46.99 cm
43.34 cm
(310) 225-6774 USBlanks.com
37.62 cm
29.37 cm
— 5 1/2 "
13.97 cm
7
5'10"RP
(63.18 cm)
(7.46 cm)
(54.1 L)
Introduced: October 2008. Designed for the
ongoing fish revolution. This follow through
ROCKER
THICKNESS
11.75 cm
3.18 cm
4 5/8
"
WIDTH
— 1 1/4 "
—
8"
20.32 cm
"
— 1 11/16"
6"
1 3/8
"
— 2 3/16"
12 "
— 19
5 16
"
—2
"
18 "
— 22
3/16
"
— 2 3/4 "
24 "
— 23
7/8
3.49 cm
5
/8
1.59 cm
1
/4
0.64 cm
5.56 cm
9/16
6.51 cm
6.99 cm
"
14 13/16
37.62 cm
/
49.05 cm
56.36 cm
60.64 cm
from 1994.
Available Rockers:
2 5/8
6.67 cm
4.29 cm
design flows from the universally accepted 6’2”C
"
"
"
Natural Rocker 4-1/2"N 1-7/8"T
-1/2"N
-1/4"24"
-1/4"N18"
-1/2"T
-1/2"24"
-1/2"N18"
-1/2"N16"
-1"N
-3/8"N12"
-3/4"N24"
-3/4"N
with
+1/4"T24"
+1/4"T
Classic
Island
Small
6'2"A
-1/2"T
Frye
Lis
-1/2"T
Frye
-1/2"N10"
-1/4"T
DN
Designer Comments: This is a versatile blank with
enough volume to accommodate multiple styles of
surfboard, but it was inspired by input from the famed
“Fish Fry”events attended worldwide. It was designed
for the modern hand shaper but modified for machine
shapes. It easily nets 5’10” deck measurement with
high performance rockers and thickness profiles. With
research and development conducted from Africa to
—2
"
15/16
7.46 cm
Center
— 24
7/8
63.18 cm
"
Japan, the 5’10”RP integrates input from many of surf
designs most experienced minds. I utilize this blank
with 4” of center removed for our vision of the high
performance fish.
"
24 "
"
1
/4
0.64 cm
"
1
/2
1.27 cm
"
—2
"
18 "
— 22
"
7
/8
1.75 cm
"
—2
"
12 "
— 20
"
1 5/16
3.33 cm
"
—1
"
6"
— 17
"
1 15/16 "
—1
"
4.92 cm
—2
3/4
6.99 cm
1/2
6.35 cm
3/16
5.56 cm
3/4
4.45 cm
Designed by:
5/16
3.33 cm
Rich Pavel
— 23
3
/4
60.33 cm
1
/2
57.15 cm
3/
8
51.75 cm
3
/4
45.09 cm
—
(310) 225-6774 USBlanks.com
14 "
35.56 cm
8
6'0"P
ROCKER
WIDTH
THICKNESS
4 /8 "
5
11.75 cm
—
7/8
"
—
2.22 cm
Maximum Width: 20"
(50.80 cm)
4"
10.16 cm
2 11/16"
6.83 cm
1 1/2
"
1 1/4
3.18 cm
6"
— 101/16"
25.56 cm
"
— 1 5/8 "
12 "
— 141/16"
"
—
2
"
18 "
— 1613/16"
"
—2
1/4
"
24 "
—
3.81 cm
13
/16
2.06 cm
5
—
/16
0.79 cm
4.13 cm
5.08 cm
5.72 cm
(6.35 cm)
35.72 cm
42.70 cm
"
18 9/16
47.15 cm
(34.9 L)
Introduced: January 2007
Available Rockers:
Natural 4-3/4"N 1-13/16"T
-3/16"N6"
-3/8"N12"
-3/4"N
+1/2"T24"
+1/2"24"
+1/4"N12"
+1/4"N20"
+1/4"N6"
+1/4"N24"
+1/8"N12"
+1/4"T18"
+1/4"T16"
+1/4"T12"
+1/4"T
+3/8"N12"
+5/16"N12"
+3/8"T12"
+3/8"T
+7/16"T20"
CF
6'1"R BC
+1/4"T18"
+1/2"T12"
-1/4"T12"
+1/2"T18"
+1/4"T18"
+5/16"T18"
+5/16"T20"
+3/8"T25"
+1/4"T24"
+1/2"T
-1/2"N6" +1/8"T18"
+1/4"N8"
+1/8T18"
+1/8"T18"
Designer Comments: This is a close to medium
tolerance blank excellent for Junior sizes. Adjusted
thickness flow in the nose and tail makes this a perfect
quick shape blank. The design was based off the 6’2P.
—
20"
— 2 1/2 "
Center
/16"
— 2 5/16"
24 "
— 18 15/16"
/16"
— 2 1/8 "
18 "
— 17 11/16"
"
— 1 7/8 "
12 "
— 15 9/16 "
1 3/16"
— 1 7/16"
6"
— 12 3/8 "
1 11/16"
— 1"
6.35 cm
3
0.48 cm
7
1.11 cm
3
/4
1.91 cm
3.02 cm
4.29 cm
Designed by:
5.87 cm
5.40 cm
4.76 cm
3.65 cm
2.54 cm
Timmy Patterson
50.80 cm
48.10 cm
44.93 cm
39.53 cm
31.43 cm
— 6 3/4 "
17.15 cm
9
6'0"R
Overall Bottom Length: 6' 0 1/2" (184.15 cm)
Tip-to-tip Deck Length: 5' 11 3/4" (182.25 cm)
ROCKER
WIDTH
THICKNESS
4 /16"
7
11.27 cm
—
1
1/4
"
—
3.18 cm
(54.93 cm)
Maximum Thickness: 3"
(7.62 cm)
5"
12.70 cm
Displacement: 1.667 ft³ (47.2 L)
2 /16 "
7
6.19 cm
1 3/8
"
3.49 cm
"
3
/4
1.91 cm
/16 "
5
0.79 cm
—
"
1 5/8
4.13 cm
— 2 3/16"
5.56 cm
6"
12 "
— 12 3/8 "
31.43 cm
— 16 3/8 "
41.59 cm
Available Rockers:
— 2 9/16"
18 "
— 18 7/8 "
— 2 13/16 "
24 "
— 20 7/16"
6.51 cm
7.14 cm
Introduced: March 2011
47.94 cm
51.91 cm
Natural 4-7/16"N 2-1/16"T
+1/2"N +3/8"T18"
-1/2"N
+3/8"T
+1/2"T
Desinger Comments:
Designed to be a versatile blank for shorter, wider,
relaxed rockered boards. Somewhere between a fish
and performance short board. Plus volume under the
chest. Semi-flat deck, and thicker on the ends should
—
3"
Center
7.62 cm
— 21
5/8
"
54.93 cm
"
— 2 13/16"
24 "
— 20 5/8 "
"
—2
"
18 "
— 19
15
/16
2.38 cm
"
— 2 1/4 "
12 "
— 17 1/8 "
1 7/16"
— 1 3/4 "
6"
— 13 3/4 "
"
— 1 1/4 "
1
/4
0.64 cm
7.14 cm
provide a wide range of options.
52.39 cm
1
/2
1.27 cm
3.65 cm
2 1/8
5.4 cm
Designed by:
9/16
6.51 cm
5.72 cm
4.45 cm
3.18 cm
Rusty Preisendorfer
1/4
"
48.90 cm
43.50 cm
34.93 cm
— 8 1/2 "
21.59 cm
10
6'2"A
Tip-to-tip Deck Length: 6' 2" (187.96 cm)
ROCKER
THICKNESS
"
4 3/4
12.07 cm
2 7/ 8 "
7.30 cm
WIDTH
8
1 1/ 8 "
"
1 5/8
4.13 cm
6"
38.58 cm
"
12 "
"
2 1/2
6.35 cm
"
18 "
21 1/4
53.97 cm
24 "
22 5/8
7
/16"
1.11 cm
2 3/4
"
6.99 cm
19 "
2 1/8
5.40 cm
15
/16
2.38 cm
(7.46 cm)
15 3/16"
1 11/16"
4.29 cm
(59.69 cm)
"
20.32 cm
2.86 cm
(55.1 L)
Introduced: July 2006
48.26 cm
"
"
57.47 cm
Available Rockers:
Natural 4-3/4"N 1-13/16"T
-1/2"N
-1/2"N24"
-1/4"N
-1/4"N12"
-1/4"N24"
-1/4"N20"
-1"N
-1/4"T
-3/8"N
-3/4"N24"
-3/4"N
-3/8"N12"
+1/4"N
+1/2"T
+3/8"N30"
+1/4"T
Parabolic
-1/2"T
+1/4"T20"
+1/4"T18"
+1/8"T18"
+1/4"T
Natural
-1/2"N10"
-1/4"T12"
+3/8"T12"
+1/2"T30"
5'11" Fish Template
5'10"
6'0"
Designer Comments: I designed this one to be able
to easily net a 6’1” by the bottom measurement for a
shorter length contemporary or Retro fish (or single
2 15/16"
7.46 cm
"
1/
4
0.64 cm
2 9/16
6.51 cm
"
2 5/16
5.87 cm
"
9
/16
1.43 cm
"
"
"
15
/16
2.38 cm
33.81 cm
1 5/16"
1 11/16"
"
1 1/4
3.18 cm
3.33 cm
1 13/16
4.60 cm
Designed by:
Center
2
4.29 cm
"
Pat Rawson
24 "
23 1/2
"
59.69 cm
22 "
55.88 cm
"Call (310) 225-6774 or visit www.usblanks.com
18 "
20 1/2
52.07 cm
12 "
18 9/16
47. 15 cm
6"
fin) design.
"
16 1/8
"
40.96 cm
12 1/2
"
31.75 cm
11
6'2"P
ROCKER
"
4 7/16
11.27 cm
2 1/ 2 "
3
/4
4 1/2
11.43 cm
1.91 cm
1 1/4
"
3.18 cm
3.81 cm
"
1 5/8
4.13 cm
/16"
2"
"
13
2.06 cm
"
"
6.35 cm
1 1/2
WIDTH
THICKNESS
5.08 cm
(52.07 cm)
10 "
14 "
6"
25.40 cm
12 "
35.56 cm
18 "
16 3/4 "
(6.35 cm)
(37.2 L)
42.55 cm
Available Rockers:
3
"
/8
0.95 cm
"
1
2 /4
5.72 cm
24 "
18 /8 "
5
47.31 cm
Natural 4-7/16"N 2-3/8"T
+1/2"N24"
+1/2"N18"
+1/2"N
+1/4"N
+1/4"N12"
+1/4"N14"
+3/16"N20"
+1/4"T12"
+1/4"T
+1/4"N6"
+3/8"N18"
6'0"P
+3/8"T24"
+3/8"T
6'3"EA
CF
Parabolic
6'1"R
BC
BC
-1/4"T18"
+3/8"T
BC
+3/8"N12"
+1/2"N18"
Natural
+1/4"18"
+1/4"T
+1/4"T18"
+1/8"T12"
-1/2"N6"
6'0"
5'10"
5'11"
+1/4"T24"
6'0"
+1/8"T18"
Template
Template
Fish
Template
Template
Designer Comments: Blank is designed for team
boards and production shaping. It is a shorter version of the 6’7”P, which has a little more thickness
2 1/2
"
6.35 cm
"
5/
16
0.79 cm
2 3/8
Center
20 1/ 2 "
52.07 cm
"
24 "
19 7/16"
6.03 cm
" Call (310) 225-6774 or visit www.usblanks.com
"
2 3/16
5.57 cm
"
18 "
17 7/8
1 1/16"
1 7/8"
12 "
15 7/16"
6"
11 7/8 "
1 5/8
"
4.13 cm
"
2 1/4
5.72 cm
Designed by:
4.76 cm
1 3/8
"
3.49 cm
1"
2.54 cm
Timmy Patterson
tolerance blank.
49.37 cm
5
/8
1.59 cm
2.70 cm
in the nose and tail than the original. A medium
45.40 cm
39.21 cm
30.16 cm
"
6 1/8
15.58 cm
12
6'3"EA
ROCKER
"
5 1/2
13.97 cm
THICKNESS
"
4 1/ 8
10.48 cm
"
3
/4
1.91 cm
3 5/16
10.00 cm
"
1 1/4
3.18 cm
6"
10 1/8
25.72 cm
1 13/16"
1 11/16"
12 "
14 3/16
36.04 cm
2"
18 "
17 1/8
4.60 cm
"
15
/16
2.38 cm
"
7
/16
1.11 cm
"
4.29 cm
5.08 cm
"
2 5/16
5.87 cm
Tip-to-tip Deck Length: 6' 3 1/4"
WIDTH
24 "
"
(52.39 cm)
"
"
(191.14 cm)
(6.51 cm)
(39.2 L)
43.50 cm
Available Rockers:
19 "
48.26 cm
Natural 5-9/16"N 2-1/6"T
-1/2"N10"
-1/2"N
-1/2"N17"
-1/2"N18"
-1/2"N20"
-1/2"N24"
-1/2"N6"
-1/4"N
-3/4"N12"
-3/8"N24"
-3/8"N15"
+1/4"N
+1/2"T
-3/8"N18"
+1/4"N18"
6'4"EA
+1/8"T8"
+1/4"T24"
+1/4"T18"
+1/4"T12"
+1/4"T
Parabolic
BC
-1/2"T
+1/4"T18"
+1/4"T
+1/2"T18"
Natural
+3/8"T25"
+1/2"T20"
+1/4"T14"
+3/8"T20"
+3/8"T18"
+1/4"T18"
+1/4"T12"
-1/4"N8"
-1/8"N6"
-1/4"N18"
+1/4"T18"
6'2"
5'10"
5'11"
6'0"
+3/16"T18"
+1/4"T18"
Template
Template
Fish
Template
Designer Comments: Designed to be a versatile blank
for boards 6’2” and under. I added a little nose width
2 9/16"
6.51 cm
"
5/
16
0.79 cm
"
9
/16
1.43 cm
"
19 1/4 "
2 3/16
5.56 cm
"
18 "
17 11/16
44.93 cm
1 7/ 8 "
12 "
15 7/16"
6"
12 7/16
31.59 cm
1 5/8 "
Designed by:
This is an essentially thinner version of the 6’4” EA.
24 "
1 7/16"
"
52.39 cm
"
4.76 cm
2 1/16
5.24 cm
to accommodate most modern full nose short boards.
20 5/8 "
2 5/16
5.87 cm
15
/16
2.38 cm
3.65 cm
Center
4.13 cm
1
1 /4 "
3.18 cm
Eric Arakawa
48.90 cm
"
39.21 cm
"
8"
20.32 cm
13
6'4"EA
THICKNESS
5 1/2
"
13.97 cm
WIDTH
/16 "
—
15
2.38 cm
(52.39 cm)
4 /8 "
1
10.48 cm
3 /16
8.41 cm
1 /16
3.33 cm
6"
1 13/16"
1 3/4 "
12 "
5
"
4.60 cm
"
15
/16
2.38 cm
7
"
/16
1.11 cm
"
5
"
2 1/8
5.40 cm
"
2 7/16
6.19 cm
—10 / 8 "
25.72 cm
4.45 cm
18 "
24 "
(6.99 cm)
1
(42.3 L)
— 14 3/16 "
36.04 cm
— 17 1/8 "
43.50 cm
— 19 "
48.26 cm
Available Rockers:
Natural 5-7/16"N 2-3/16"T
-1/2"N
-1/2"N"12"
-1/2"N12"
-1/2"N18"
-1/4"N
-1/4"N12"
-1/4"N18"
-3/4"N12"
-3/4"N
-1/4"N20"
-3/8"N10"
-3/8"N15"
-3/8"N12"
-3/8"N24"
-3/8"N20"
-3/8"N18"
+1/4"N
+1/2"T24"
+1/2"T
+1/4"T24"
+1/4"T18"
+1/4"T12"
+1/4"T
6'2"P
6'3"EA
CF
Parabolic
6'3"R
BC
BC
DC
+1/4"T18"
-1/4"N12"
+1/2"T18"
+1/4"T24"
+1/4"T
DN
-1/4"N18"
Natural
+1/4"T18"
+3/16"T18"
+1/4"T24"
+1/8"T14"
-1/8"N6"
-1/4"N8"
-1/2"M17"
+1/2"T24"
-1/2"N17"
-1/4"N10"
+3/16"T18"
6'2"
5'10"
+1/4"T18"
+3/16"T18"
Rocker
+3/8"T25"
Template
Template
6'2" Template
Designer Comments: Designed to be a versatile blank
for modern shortboard designs 6’2” and under in
length. I added a little nose width to accommodate
2 3/4 "
Center
6.99 cm
— 20 5/8 "
52.39 cm
most modern full nose short boards, and it also accommodates machine shapes.
"
2 1/2
6.35 cm
"
24 "
— 19 1/4"
"
2 5/16"
18 "
— 17 11/16 " Call (310) 225-6774 or visit www.usblanks.com
2"
12 "
— 15 7/16"
6"
— 12 7/16"
5
/16
0.79 cm
9
/16
1.43 cm
"
5.87 cm
15
/16
2.38 cm
5.08 cm
1 7/16"
11
1 /16"
"
1 5/16"
3.65 cm
2 1/16
5.24 cm
Designed by:
4.29 cm
3.33 cm
Eric Arakawa
48.90 cm
44.93 cm
39.21 cm
31.59 cm
—
8"
20.32 cm
14
6'5"A
ROCKER
THICKNESS
5 /16"
—
3 /16"
—
1
12.86 cm
1
1/4
3.16 cm
"
"
—2
3/16
"
—
5/8
8.10 cm
4.29 cm
—
7 1/2 "
6"
— 14
3/4
12 "
— 18
7/8
18 "
— 21
1/8
37.47 cm
"
7
1 /8
4.76 cm
5.56 cm
(59.69 cm)
19.05 cm
"
1
11/16
3
WIDTH
(195.26 cm)
"
47.94 cm
(7.94 cm)
(60.9 L)
"
1 1/16
2.70 cm
"
9
/16
1.43 cm
2
6.67 cm
"
"
53.66 cm
Available Rockers:
—2
7/8
7.30 cm
"
24 "
— 22 1/2 "
57.15 cm
Natural 5-1/4"N 1-13/16"T
-1-3/8"N
-1/2"N
-1/2"N24"
-1/2"N18"
-1/4"N
-1/4"N12"
-1/4"N24"
-1/4"N18"
-1"N
-3/4"N
-3/8"N10:
-3/4"N8"
-3/4"24"N
-3/8"N18"
-3/8"N8"
-7/8"N
-5/8"N18"
+1/4"N
6'5"P
+1/4"T
Parabolic
-1/2"T
-1"T
Deck
+5/16"T30"
+1/2"T
+1/2"T18"
-1/4"T
-5/8"T
+1/4"T
-1/4"T
-3/4"T
Natural
+3/8"T18"
-1/4"T24"
+3/8"T12"
-1/2"N10"
Rocker6'0"
6'4" Template
Fish Template
Designer Comments: This is my longer version of the
6’2” A, to be able to easily net a 6’4” by the bottom
measurement for a shorter mid length contemporary
—
3 1/8
7.94 cm
"
Center
— 23 1/2 "
or Retro fish (or single fin) design.
59.69 cm
"
— 2 11/16"
24 "
— 21 3/4 "
9
/16
1.43 cm
"
—
"
18 "
7
/8
2.22 cm
"
—
"
12 "
— 18 3/8 "
1 5/16
3.33 cm
"
—
"
6"
—
"
—
"
5
/16
0.79 cm
1 3/ 4
4.45 cm
Designed by:
6.83 cm
2 1/2
6.35 cm
2 1/8
5.40 cm
1 3/4
4.45 cm
1 1/2
3.81 cm
Pat Rawson
55.25 cm
51.44 cm
46.67 cm
16 "
40.64 cm
— 12 1/2 "
31.75 cm
15
6'5"R
ROCKER
1 3/8
3.49 cm
"
1 15/16
4.92 cm
"
2 9/16
6.51 cm
1 9/16
3.97 cm
"
7
/8
2.22 cm
"
"
"
4 11/16
11.91 cm
WIDTH
THICKNESS
6 1/4
15.88 cm
"
6"
13 1/8
33.34 cm
2 3/8
6.03 cm
"
12
16 7/8
42.86 cm
2 3/4 "
18 "
19 1/4
48.90 cm
24 "
20 3/4 "
6.99 cm
3
/8
"
0.95 cm
3"
7.62 cm
(55.25 cm)
(8.26 cm)
"
"
"
52.71 cm
Available Rockers:
Natural 4-11/16"N 2-1/4"T
+1/4"N +1/4"T
+1/2"T
-3/8"N18"
+1/8"T12"
+1/4"T12"
+1/4"N15"
Designer Comments: This is the larger version of the
6’0” R. Designed to be a versatile blank for shorter,
wider, relaxed rockered boards; somewhere between
a fish and a performance short board. . Plus volume
3
1/ 4
8.62 cm
"
Center
21
3/4
"
55.25 cm
under the chest .The semi-flat deck and thicker nose
and tail provide a wide range of options.
"
1
/4
0.64 cm
/16 "
9
1.43 cm
"
11
/16
1.75 cm
"
1 7/16
3.65 cm
"
2 1/4
5.72 cm
"
24 "
2 13/16"
18 "
3 1/16
7.78 cm
7.14 cm
"
2 7/16
6.19 cm
12 "
2"
6"
5.08 cm
"
1 3/8
3.49 cm
Designed by: Rusty Preisendorfer
"
20 5/8
52.39 cm
19 1/8 "
48.58 cm
17 "
43.18 cm
14 "
35.56 cm
"
9 1/4
23.50 cm
16
6'6"EA
ROCKER
5 5/16"
13.49 cm
4 1/4
10.80 cm
2.54 cm
"
6"
10 9/16"
"
12
14 5/8
2 1/4
5.72 cm
"
18 "
"
24 "
1 3/8
3.49 cm
1 7/8
4.76 cm
"
1 7/ 8
4.76 cm
"
"
2 9/16
6.51 cm
1 1/16
2.70 cm
1
/2
1.27 cm
"
1"
"
3 5/16
8.41 cm
WIDTH
THICKNESS
26.83 cm
"
17 5/8
44.77 cm
"
19 9/16"
Available Rockers:
37.15 cm
49.69 cm
(53.98 cm)
(7.46 cm)
(46.7 L)
Natural 5-5/16"N 2-3/8"T
-1/2"N12"
-1/2"N
-1/4"N
-1/8"N
-1/4"N18"
-1/8"N10"
-3/8"N12"
-1/8"N18"
-3/8"N15"
-3/8"N24"
-3/8"N18"
+1/4"N
+1/2"T
+1/2"N
+1/4"N12"
+3/8"N
+1/4"T24"
+1/4"T18"
+1/4"T12"
+1/4"T
Biggs
Parabolic
Parabolic
+1/8"T24"
+1/4"T15"
+1/2"T
+1/4"T
Natural
+1/4"T24"
+1/4"T15"
+1/4"T18"
-1/8"N6"
-3/8"T24"
+1/4"T12"
6'4"
6'4"
5'11"
+1/4"T18"
Template
Template
Fish Template
Designer Comments: This blank is intended for
high-performance shortboard designs between 6’2”
and 6’5” in length. It was designed in concert with the
2
"
Center
15/16
7.46 cm
21
1/4
"
53.98 cm
"
2 5/8
6.67 cm
"
24 "
19 3/4 "
"
2 3/8
6.03 cm
"
18 "
18 1/8
46.04 cm
1 1/16"
2 1/16
5.23 cm
"
12 "
15 3/4 "
1 9/16"
1 5/8
4.13 cm
6"
12 1/2 "
"
1 5/16
3.33 cm
5
/16
0.79 cm
5
/8
1.59 cm
2.70 cm
3.97 cm
2 3/16
5.56 cm
Designed by:
"
"
Eric Arakawa
6’4” EA and the 6’9” EA.
50.17 cm
40.01 cm
31.75 cm
"
7 1/2
19.05 cm
17
6'7"P
ROCKER
1
"
5 /4
13.34 cm
THICKNESS
3/4
WIDTH
"
4
1.91 cm
3/8
"
11.11 cm
3 1/4
"
8.26 cm
1 15/16"
4.92 cm
1 1/8
"
2.86 cm
"
9
/16
1.43 cm
"
1 1/8
2.86 cm
"
6"
26.04 cm
2"
18 "
17 3/8"
24 "
19 7/16"
"
(6.99 cm)
14 1/2 "
12 "
2 5/16
5.87 cm
(54.61 cm)
10 1/4"
1 9/16
3.97 cm
5.08 cm
(198.76cm)
36.83 cm
44.13 cm
49.37 cm
(43.6 L)
Available Rockers:
Natural 5-1/4"N 2-7/16"T
-1/4"N8" +1/8"T20"
-1/4"N12"
-1/2"N
-1/8"N6"
+1/4"N18"
+3/8"N24"
+1/8"T24"
+1/8"T20"
+1/8"T18"
+1/4"T20"
+1/4"T
+3/8"T18"
Parabolic
+1/8"T
+1/8"T18"
Natural
+1/4"T20"
+3/8"T 6'6"Rocker
+3/8"T18"
Template
6'4" Template
boards and production shaping. It has a little more
2 3/4 "
Center
"
24 "
19 15/16"
6.99 cm
21 1/2 "
54.61 cm
thickness in the nose and tail than the original 6’6”P.
A medium tolerance blank.
"
2 7/16
6.19 cm
3
/4
1.91 cm
"
2 3/16
5.56 cm
"
18 "
18 3/8 " Call (310) 225-6774 or visit www.usblanks.com
1 3/16"
1 13/16"
12 "
15 7/8
40.32 cm
6"
12 1/2"
3
/8
0.95 cm
3.02 cm
1 3/4
"
4.45 cm
2 3/8
"
6.03 cm
Designed by:
4.60 cm
"
1 3/8
3.49 cm
1"
2.54 cm
Timmy Patterson
50.64 cm
46.67 cm
"
31.75 cm
"
6 3/4
17.15 cm
18
6'8"A
ROCKER
THICKNESS
5 /16"
13.49 cm
WIDTH
1"
5
3 3/4 "
2.54 cm
Tip-to-tip Deck Length: 6' 7"
9.53 cm
3
"
7.62 cm
6"
1 /16"
11
4.29 cm
10
7/8
(55.56 cm)
"
27.62 cm
1 5/8
"
4.13 cm
7
/8
12 "
2 3/16"
5.56 cm
2 1/2 "
18 "
18 3/8 "
"
2 3/4
"
24 "
20 1/8 "
7
/16
1.11 cm
6.35 cm
6.99 cm
(7.46 cm)
"
15 9/16
39.53 cm
"
2.22 cm
(200.66 cm)
46.67 cm
51.12 cm
(55.3 L)
Available Rockers:
Natural 5-1/2"N 1-13/16"T
-1/2"N
6'8"
+3/16"T28"
+1/8"T18"
+1/4"T
-1/4"N10"
CF
6'7"
EPS+1/2"T
ANatural
BC
BC
Designer Comments: I have listened to many shaper’s
feedback over the years with this blank. It nets a 6’6”
2
15/16
"
Center
21 7/8"
55.56 cm
7.46 cm
bottom length. The slightly wider outline allows for
board designs ranging from shortboard to fun shapes.
The natural rocker is good for vee tail and contour
nose type shapes. The Hawaii Rocker to be used for
hi-performance styles.
11
/16
6.83 cm
"
24 "
20 1/16"
/16"
2 1/2 "
18 9/16"
1.43 cm
6.35 cm
18 "
"
2 1/4 "
12 "
16 3/4 "
"
1 7/8
"
6"
13 7/8 "
"
1 1/2
"
"
5
/16
0.79 cm
9
7
/8
2.22 cm
1 1/4
3.18 cm
1 3/4
4.45 cm
Designed by:
2
5.72 cm
4.76 cm
3.81 cm
Pat Rawson
50.96 cm
(310) 225-6774 - USBlanks.com
47.15 cm
42.55 cm
35.24 cm
"
9 1/2
24.13 cm
19
6'8"AX
ROCKER
THICKNESS
5 /16
13.49 cm
"
1 /8
3.49 cm
"
7.62 cm
2 1/16"
5.24 cm
"
5
3
1 5/8
WIDTH
"
"
3 3/4
9.53 cm
6"
10 7/8"
2 9/16"
12 "
15 9/16"
"
2 7/8 "
"
3 1/8
"
4.13 cm
7
/8
2.22 cm
7
/16
1.11 cm
3
6.51 cm
7.30 cm
7.94 cm
(200.66 cm)
(55.56 cm)
27.62 cm
(8.41 cm)
39.53 cm
6’8A w/ 3/8” added thickness overall
18 "
18 3/8 "
24 "
20 1/8 "
46.67 cm
(63.5 L)
51.12 cm
Available Rockers:
Natural 5-1/2"N 1-13/16"T
-1/2"N
6'8"
+3/16"T28"
+1/8"T18"
+1/4"T
-1/4"N10"
CF
6'7"
EPS+1/2"T
ANatural
BC
BC
Designer Comments: This is a 3/8” thicker version
3 5/16"
Center
21
7/8
"
55.56 cm
8.41 cm
than the 6’8” A. I have listened to many shaper’s
feedback over the years with this blank. It nets a 6’6”
bottom length. The slightly wider outline allows for
board designs ranging from shortboard to fun shapes.
The natural rocker is good for vee tail and contour
nose type shapes. The Hawaii Rocker to be used for
/16
0.79 cm
"
3 /16
7.78 cm
"
24 "
20
/16"
2 7/8 "
18 "
1.43 cm
7.30 cm
18 9/16"Call (310) 225-6774 or visit www.usblanks.com
"
2 5/8 "
12 "
16 3/4 "
"
2 1/4
"
6"
13 7/8 "
"
1 7/8
"
5
9
7
/8
2.22 cm
1 1/4
3.18 cm
1 3/4
4.45 cm
Designed by:
1
6.67 cm
5.72 cm
4.76 cm
Pat Rawson
"
1/16
50.96 cm
47.15 cm
42.55 cm
35.24 cm
"
9 1/2
24.13 cm
20
6'8"P
ROCKER
1
"
5 /16
12.86 cm
WIDTH
THICKNESS
"
7/
8
2.22 cm
4
1/2
"
11.43 cm
3 1/16"
6"
1 3/16"
7.78 cm
3.02 cm
1 13/16
4.60 cm
"
1 11/16"
1.69 cm
12 "
26.67 cm
(6.99 cm)
14 1/ 2"
36.83 cm
1"
2 1/16"
5.24 cm
18 "
17 1/4 "
"
2 3/8"
24 "
19 1/4 "
6.03 cm
(54.29 cm)
10 1/2 "
2.54 cm
1
/2
1.27 cm
(200.03 cm)
43.82 cm
48.90 cm
(44.4 L)
Available Rockers:
Natural 5-1/4"N 2-1/8"T
+1/4"N18"Natural
+3/8"N18"
+1/4"T30"
+1/4"T24"
+1/4"T20"
+1/4"T12"
+1/4"T
+3/8"N30"
Parabolic
+1/4"T12"
+1/4"T18"
+1/2"T30"
6'6" Template
boards and production shaping. Slightly narrower and
2
"
3/ 4
6.99 cm
Center
21 3/ 8 "
54.29 cm
longer than the 6’7”P, but with matching thicknesses.
It’s a medium tolerance blank.
"
2 7/16
6.19 cm
"
24 "
19 3/4 "
"
2 3/ 16 "
18 "
18 3/16" Call (310) 225-6774 or visit www.usblanks.com
1 1/8
2.86 cm
"
1 7/ 8
4.76 cm
"
12 "
15 11/16"
1 5/8 "
1 1/ 2
3.81 cm
"
6"
12 1/16"
3
/8
0.95 cm
11
/16
1.75 cm
4.13 cm
"
2 3/16
5.56 cm
Designed by:
5.56 cm
1"
2.54 cm
Timmy Patterson
50.17 cm
46.19 cm
39.85 cm
30.64 cm
"
6 1/ 2
16.51 cm
21
6'8"RP
ROCKER
"
5
12.70 cm
—1
1/4
WIDTH
7 1/2
19.05 cm
(63.82 cm)
(7.62 cm)
"
"
3.18 cm
"
— 1 11/16"
6"
14 5/16"
Maximum Thickness: 3 "
"
—
2 1/8
5.40 cm
"
12 "
18 9/16 "
"
—
2 7/16"
18 "
21 1/ 2 "
Introduced: November 2008
"
—
2 11/16"
24 "
23 3/8 "
3 1/16
7.78 cm
1 3/4
4.45 cm
15
/16
2.38 cm
7
/16
1.11 cm
THICKNESS
4.29 cm
6.19 cm
6.83 cm
36.35 cm
(63.8 L)
47.15 cm
54.61 cm
59.37 cm
Available Rockers:
Natural 5"N 2-1/8"T
-1/2"N30"
-1/4"N24"
-1/2"N
-1"N
-3/4"N24"
-3/4"N
Classic
+3/8"T18"
+1/4"T18"
Island
-1/2"T
Lis
Frye
Rocker
-3/8"T30"
-1/2"N10"
-1/4"T24"
Rocker
Designer Comments: Very versatile and designed with
input from some of surfing’s best designs minds, the
6’8”RP is influenced by a universal rocker with timeless
—
3"
Center
25 1/ 8 "
63.82 cm
7.62 cm
profiles. This blank accommodates the trend to ride
shorter, yet fuller volumed boards. It also provides
enough volume for new levels of self expression for
shapers and designers. It cleanly nets a 6’8” deck
measurement with high performance rockers and
2 3/4 "
"
—
"
—
1 /16
2.70 cm
"
—
1 1/2
3.81 cm
"
—
1 13/16
4.60 cm
2 1/8
5.40 cm
"
—
1 7/16
3.65 cm
3
/8
0.95 cm
6.96cm
24 "
23 3/8 "
18 "
15/16
59.37 cm
thickness profiles. Excellent for contemporary LisFish. Big brother to 5’10”RP. Modified and updated
for machine use.
5
/8
1.59 cm
"
2
1/2
2
3/16
6.35 cm
21
55.72 cm
"
(310) 225-6774 - USBlanks.com
1
"
12 "
"
6"
5.56 cm
"
Designed by: Rich Pavel
20 "
50.80 cm
17 3/8 "
44.13 cm
13 3/4 "
34.93 cm
22
6'9"EA
Overall Bottom Length: 6' 9" (205.74 cm)
ROCKER
9
"
5 /16
14.13 cm
3 7/16"
8.73 cm
2"
5.08 cm
THICKNESS
15/16
WIDTH
"
4"
2.38 cm
1 3/8
"
6"
1
7/8
"
12 "
2
3/16
"
18 "
3.49 cm
4.76 cm
10 1/8"
"
1 /8
2.86 cm
5.56 cm
(54.13 cm)
25.72 cm
"
14
1/8
17
1/16
(7.46 cm)
35.88 cm
1
(203.20 cm)
10.16 cm
(48.3 L)
"
43.34 cm
"
9
/16
1.43 cm
2 1/2
"
6.35 cm
24 "
19 1/8"
48.58 cm
Available Rockers:
Natural 5-9/16"N 2-1/2"T
-3/8"N15"
-1/8"N
-1/4"N
-1/2"N24"
-1/2"N
-3/8"N18"
+1/2"N
-3/8"N24"
+1/4"N
+1/2"T12"
+3/8"N24"
+1/4"T24"
+1/4"T18"
+1/4"T12"
+1/4"T
+3/8"T18"
6'7"P
CF
Parabolic
6'9"R
+1/8"T18"
BC
+1/2"T
+1/4"T
+1/4"T18"
Natural
-1/8"N6"
-3/8"T24"
+1/4"T12"
6'8"
+1/4"T18"
Template
Designer Comments: This blank is designed to yield
most modern short board designs. The thicker nose
2
15/16
7.46cm
"
Center
and tail give it added versatility for machining. I de-
21 5/16"
54.13 cm
signed the rocker and foil to accommodate low and
full rocker designs.
"
2 5/8 "
24 "
19 9/16"
"
2 3/8 "
18 "
17 7/8 "
2"
12 "
15 5/ 8"
"
1 5/8 "
6"
12 3/8 "
"
1 1/8 "
7
/16
1.11 cm
3
/4
1.91 cm
1 3/16
3.02 cm
1 3/4
4.45 cm
2 1/ 2
6.35 cm
"
Designed by:
6.67 cm
6.03 cm
5.08 cm
4.13 cm
2.86 cm
Eric Arakawa
49.69 cm
45.40 cm
39.69 cm
31.43 cm
7”
17.78 cm
23
6'9"R
ROCKER
THICKNESS
"
4 7/8
12.38 cm
3
"
1 1/8
1 3/4
"
4.45 cm
1 3/4 "
2 7/16"
1"
"
7
/16
1.11 cm
15.24 cm
6"
12 "
6.19 cm
2 7/8
2.54 cm
"
7.30 cm
3 3/16"
6"
"
2.86 cm
7.62 cm
4.45 cm
WIDTH
18 "
24 "
8.10 cm
(58.74 cm)
13 "
33.02 cm
(9.05 cm)
17 3/8 "
44.13 cm
(68.1 L)
20 "
50.80 cm
Introduced: October 2014
"
21 3/4
55.25 cm
Available Rockers:
Natural 4-7/8"N 2-3/8"T
+3/8"T18"
Designer Comments: The big brother to the 6’5” R
to cover models in the upper size range. Designed
3 9/16"
Center
9.05 cm
23 1/8 "
58.74 cm
to be a versatile blank for shorter, wider, relaxed
rockered boards; somewhere between a fish and a
performance short board. . Plus volume under the
chest .The semi-flat deck and thicker nose and tail
provide a wide range of options.
7
/16
1.11 cm
3
/4
1.91 cm
"
"
8.26 cm
3"
7.62 cm
"
2 9/16"
"
2 1/16"
"
1 1/2 "
1 3/16
3.02 cm
1 3/4
4.45 cm
2 3/ 8
6.03 cm
3 1/4 "
Designed by:
6.51 cm
5.24 cm
24 "
21 7/16"
18 "
12 "
17 3/ 4"
6"
14 5/8 "
3.81 cm
Rusty Preisendorfer
54.45 cm
50.64 cm
45.09 cm
37.15 cm
"
9 5/8
24.45 cm
24
6'10"A
ROCKER
THICKNESS
WIDTH
1 3/8 "
8"
5"
12.70 cm
3 3/16"
8.10 cm
2
5.08 cm
20.32 cm
3.49 cm
1 7/8 "
6"
4.76 cm
"
2 3/8
6.03 cm
"
12 "
"
7/
"
18 "
15 1/16"
Maximum Width: 24"
(60.96 cm)
38.26 cm
"
(8.89 cm)
1 16
19 /
48.42 cm
3
1 /16
3.02 cm
2 8
7.30 cm
21
3/8
"
54.29 cm
5
/8
1.59 cm
"
3 1/8 "
24 "
7.94 cm
"
22 7/8
58.10 cm
Available Rockers:
Natural 5-3/16"N 2"T
-1/2"N
-1/4"N
-1/2"N24"
-1/2"N18"
-1/4"N24"
-1"N
-3/16"N
-3/4"N
-3/4"N24"
-3/8"N
-3/8"N18"
+1/2"N
+3/4"N
+1/4"T
+1/2"T12"
-1"T
-3/8"T
-1/2"T
-1/4"N12"
-1/4"T
+1/4"T
+1/4"T
+1/8"T
+3/8"T
+1/2"T
-3/8"T
-1/2"N10"
-1/2"T
1
/16"
0.16 cm
36 "
3 7/16"
Center
3 3/8
8.57 cm
"
36 "
3"
24 "
21 3/4
55.25 cm
18 "
20 1/16
50.96 cm
8.89 cm
/64
0.12 cm
3
/8
0.95 cm
"
"
60.96 cm
designed to be able to easily net a 6’9” by the bottom
24 "
measurement for 6’5 to 6’9 length contemporary or
7.62 cm
"
23
3/4
"
"
2
"
2 5/16
5.87 cm
12 "
18 1/8
46.04 cm
"
1 15/16"
6"
15 3/4 "
"
1 1/2
3.81 cm
1 1/16
2.70 cm
1 7/ 16
3.65cm
Designed by:
11/16
6.83 cm
"
4.92 cm
"
Pat Rawson
Retro fish (or single fin) design.
60.33 cm
"
11
/16
1.75 cm
1 7/ 8
4.76cm
24 "
60.96 cm
8.73 cm
3
Designer Comments: This is my big guy fish blank,
"
3 1/2
"
40.01 cm
12 "
30.48 cm
25
7'0"A
ROCKER
THICKNESS
"
5 1/2
13.97 cm
WIDTH
1"
"
2.54 cm
4 5/8
11.75 cm
"
1 9/16"
6"
11 7/16"
1 3/ 4 "
2 1/16"
4.45 cm
15 5/8 "
5.24 cm
12 "
1"
2 1/ 2 "
18 "
18 3/8 "
2 13/16"
24 "
20 1/8 "
3 1/8
7.94 cm
2.54 cm
1
"
/2
1.27 cm
3.97 cm
6.35 cm
7.14 cm
29.05 cm
(56.20 cm)
(8.10 cm)
39.69 cm
(60.0 L)
46.67 cm
51.12 cm
Available Rockers:
Natural 5-5/8"N 2-1/16"T
-1/2"N BC
-1/2"N24"
+1/2"N
-3/8"N24"
-3/8"N18"
-1/4"N6"
-1/4"N10"
+3/4"N
+1/4"N
+5/16"T30"
7'1"EA
7'2"EA
DC
+3/16"T
+3/4"T
+1/2"T
-1/4"T24"
1
/32
0.08 cm
"
3 1/ 8 "
36 "
7.94 cm
3 3/16 "
Center
8.10 cm
"
3 1/8 "
"
2
21 7/8 "
55.56 cm
22 1/16"
56.04 cm
36 "
21 9/16"
3/
4
6.99 cm
24 "
19 5/ 8 "
/16"
2 1/2 "
18 "
17 7/8 "
"
2 3/16
5.56 cm
"
12 "
15 3/4 "
"
1 7/8 "
6"
12 3/ 4 "
2"
1 3/8"
1
/16
0.16 cm
7
/16
1.11 cm
11
1.75 cm
1 1/16
2.70 cm
1 1/2
3.81 cm
5.08 cm
Designed by:
7.94 cm
"
6.35 cm
4.76 cm
3.49 cm
Pat Rawson
Designer Comments: The slightly wider outline allows
for board designs ranging from bigger guy short
boards to fun shapes. The natural rocker is good for
vee in the tail and contoured bottom designs. The
Hawaii Rocker to be used for hi-performance styles.
54.77 cm
49.85 cm
45.40 cm
40.00 cm
32.39 cm
"
8 1/2
21.59 cm
26
7'1"A
ROCKER
THICKNESS
WIDTH
"
5 11/16"
1 1/8 "
3 1/2 "
1 3/4
4.45 cm
6"
11 1/8
28.26 cm
(56.36 cm)
2 1/16
5.24 cm
"
2 3/16"
12 "
15 1/ 2 "
Maximum Thickness: 3 "
(7.62 cm)
1 1/4
3.18 cm
"
2 1/2 "
18 "
18 3/8 "
"
2 3/4 "
24 "
20 3/16"
14.45 cm
8.89 cm
11
/16
1.75 cm
4 1/2
11.43 cm
2.86 cm
"
5.56 cm
6.35 cm
6.99 cm
"
39.37 cm
46.67 cm
(213.04 cm)
(58.1 L)
51.28 cm
Available Rockers:
/32"
3
0.24 cm
3"
36 "
22 1/16"
3"
Center
22 3/16"
7.62 cm
56.04 cm
Natural 5-11/16"N 2-1/8"T
-5/8"N
+1/2"N
+1"N
+1/4"T18"
+3/8"N
CF
+5/16"T32"
7'0"A
+1/2"T
-1/4"T
+3/8"T
BC
Designer Comments: About 3/16” thinner than the
7’0” A, this can net a 6’11” bottom length. The natural
56.36 cm
7.62 cm
rocker is good for vee in the tail and contoured bottom
designs. The Hawaii Rocker to be used for hi-perfor-
1
"
/16
0.16 cm
2
15/
16
7.46 cm
"
36 "
21
"
3/4
55.25 cm
mance styles. I personally like the 7’2” EA bottom
curve glued up with this one for a flatter deck design.
"
2 5/8 "
24 "
19 9/16"
"
2 7/16 "
18 "
1"
2 1/8"
12 "
15 5/8 "
1 7/16"
1 13/16"
6"
12 3/4 "
2 1/16"
1 5/16"
3
/8
0.95 cm
11
/16
1.75 cm
2.cm
3.65 cm
5. cm
Designed by:
6.67 cm
6.19 cm
5.40 cm
4.60 cm
3.33 cm
Pat Rawson
44.69
45.24 cm
39.69 cm
32.39 cm
9"
22.86 cm
27
7'1"EA
ROCKER
THICKNESS
5 3/8 "
13.65 cm
7/8
WIDTH
"
2.22 cm
8.26 cm
1 1/2"
6"
"
12 "
1 1/8 "
2 3/8 "
18 "
"
11/16
3 5/16"
8.41 cm
1 15/16"
4.92 cm
2.86 cm
3.49 cm
2
3 1/4 "
11 1/8 "
(57.31 cm)
28.26 cm
5.08 cm
15 3/ 4"
(7.62 cm)
40.01 cm
6.03 cm
(54.6 L)
18 5/ 8 "
47.31 cm
9
/16
1.43 cm
2
6.83 cm
"
24 "
20
7/16
"
51.91 cm
Available Rockers:
Natural 5-7/16"N 2-7/16"T
-1/2"N -3/8"N10"
-1/4"N
-3/8"N
-3/4"N
+1/2"N
-3/8"N24"
-3/8"N18"
+1/4"N
Parabolic
+1/4"T18"
+1/4"T
+1/4"N12"
+1/4"T36"
+1/8"T18"
+3/8"T
+1/4"T
+1/2"T
+1/4"T
Natural 7'0" Template
"
1
/32
0.08 cm
2 15/16"
7.46 cm
3"
36 "
Center
7.62 cm
1
"
22 5/16
56.67 cm
making fun boards. It comes with a moderate but
"
22 9/16
57.31 cm
2 15/16"
36 "
"
2 11/16 "
24 "
20 1/ 2
52.07 cm
"
2 7/16"
18 "
18 11/16 "
1"
2 1/8 "
12 "
16 1/ 4
41.28 cm
"
"
1 5/8 "
6"
12 7/16
31.59 cm
"
5
/16
0.79 cm
5
/8
1.59 cm
2.54 cm
1 1/ 2
3.81 cm
"
2 1/4
5.72 cm
Designed by:
7.46 cm
6.83 cm
6.19 cm
5.40 cm
4.13 cm
1"
2.54 cm
Eric Arakawa
continuous even rocker and foil to make“positioning”
the blank for the shape process easy. This is the shorter
/16"
0.16 cm
Designer Comments: This is primarily designed for
22 5/16"
version of the 7’6” EA.
56.67 cm
"
47.47 cm
6"
15.24 cm
28
7'2"EA
ROCKER
THICKNESS
WIDTH
3 1/2 "
"
6 1/16
15.40 cm
"
15/
16
2.38 cm
3 7/8
9.84 cm
"
1 5/16
3.33 cm
6"
9 1/4
23.50 cm
2 5/16
5.87 cm
"
1 13/16"
12 "
13 1/4"
"
2 1/ 4
5.72 cm
"
18 "
16 1/4 "
"
2 9/16
6.51 cm
"
24 "
18 9/16"
1 1/4
3.18 cm
5
/8
1.59 cm
"
4.60 cm
8.89 cm
"
33.66 cm
41.28 cm
(54.93 cm)
(7.46 cm)
(53.4 L)
47.15 cm
Available Rockers:
"
1
/16
0.16 cm
"
2 7/ 8
7.30 cm
36 "
Natural 6-1/8"N 2-5/8"T
+1/2"T
-1/4"T
-1/4"N18"
-1/2"N
CF
Parabolic
7'3"P BN
BC
Natural 7'2" Template
21 3/16"
Designer Comments: This blank is a versatile high
53.82 cm
performance semi-gun which was designed in series
2 15/16"
Center
"
21 5/8 "
with the 7’8”EA. The rocker and foil will accommodate
54.93 cm
7.46 cm
a wide variety of bottom contours.
"
2 7/8
7.30 cm
36 "
21 7/16"
"
2 5/ 8
6.67 cm
"
24 "
19 3/ 8"
"
18 "
17
"
12 "
15 1/ 4 "
"
6"
11 15/ 16"
1
/16
0.16 cm
1
/2
1.27 cm
54.45 cm
49.21 cm
13
"
/16
2.06 cm
2
3/ 8
6.03 cm
1 5/16
3.33 cm
"
2 1/16
5.24 cm
1 15/16"
1 11/16
4.29 cm
2 9/16"
1 3/8
3.49 cm
4.92 cm
6.51 cm
Designed by:
"
Eric Arakawa
"
9/16
44.61 cm
38.74 cm
30.32 cm
"
6 1/ 4
15.88 cm
29
7'3"A
ROCKER
THICKNESS
WIDTH
"
1 3/8
3.49 cm
"
3 1/2
8.89 cm
"
1 7/8
4.76 cm
"
6"
14 1/2
36.83 cm
2 1/4 "
2 7/16
6.19 cm
"
12 "
18 1/2
46.99 cm
1 3/8
3.49 cm
"
2 7/8
7.30 cm
"
18 "
"
3 3/16
8.10 cm
"
24 "
5 5/16
13.49 cm
5.72 cm
3
/4
1.91 cm
"
7 3/8
18.73 cm
"
"
21"
53.34 cm
"
22 1/2
57.15 cm
Maximum Width: 24"
(60.96 cm)
(219.39 cm)
(9.21 cm)
(77.7 L)
Available Rockers:
1
/8
"
0.32 cm
"
36 "
3 9/16
9.05 cm
Natural 5-1/2"N 2-1/8"T
-1/4"N24"
-1/2"N24"
-1/2"N
-1-1/4"N
-1/4"T36"
-1"N
+1/4"N
-3/8"N24"
-3/4"N24"
-3/4"N18"
-3/4"N
7'5"A
+1"T12"
+1/4"T
Classic
-1/2"T
-1"T
+1/2"T
BN
Frye
+1/4"T
-1/2"T
-1/2"N10"
Rocker
24 "
60.96 cm
Designer Comments: This is my enlarged version
of the 6’10”A fish blank. I designed this one as to be
"
3 9/16
9.05 cm
/32"
3
0.24 cm
"
1
/2
1.27 cm
Center
3 7/16"
8.73 cm
24"
able to easily net a 7’1” by the bottom measurement.
60.96 cm
36 "
23 1/2 "
fish (or single fin) designs.
59.69 cm
3"
24 "
21 3/8
54.29 cm
2 11/16"
18 "
19 13/16"
"
12 "
17 3/4
45.09 cm
"
6"
15 1/16
38.52 cm
7.62 cm
Should net 6’9 to 7’1 length for contemporary or Retro
"
13
"
/16
2.06 cm
6.83 cm
1 3/16"
2 5/16
5.87 cm
1 5/8
4.13 cm
"
1 15/16
4.92 cm
"
1 1/2
3.81 cm
3.02 cm
2 1/16
5.24 cm
Designed by:
"
Pat Rawson
50.32 cm
"
"
11 "
27.94 cm
30
7'4"SP
ROCKER
41
"
/8
10.48 cm
1 1/ 2
3.81 cm
6"
17 1/4 "
"
12 "
20 3/8
51.75 cm
2 11/16"
18 "
22 3/16"
Displacement: 2.723 cubic feet (77.1 L)
3"
24 "
23 5/16
59.21 cm
"
1 7/ 8 "
4.76 cm
1 9/16"
2 1/4
5.72 cm
3.97 cm
"
15
/16
2.38 cm
"
1
/2
1.27 cm
"
6.35 cm
2 1/2
WIDTH
THICKNESS
6.83 cm
7.62 cm
43.82 cm
"
(61.44 cm)
(8.57 cm)
56.36 cm
"
Introduced: June 2014
Available Rockers:
"
1
/16
0.16 cm
3 5/16"
8.41 cm
36 "
"
24 3/16
61.44 cm
Natural 4-1/8"N 2-3/8"T
-1/2"N -1/2"T
+3/8"T
Designer Comments: The 7’4” SP and the 7’10” SP
were built together on Maui and are similar to the 8’4”
3 3/ 8 "
8.57 cm
Center
24 1/16"
61.12 cm
SP, offering a more complete size progression for mini
longboards. The outlines of both were widened relative to the 8’4” SP to make them usable for a broader
"
1
/16
0.16 cm
3
1/4
"
8.26 cm
36 "
23
3/8
"
59.37 cm
range of designs. Natural rocker is fairly neutral in
both the nose and tail, with enough thickness to
shape them up or down, according to the shaper’s
preference. Ideal for boards in the 6’10” to 7’4” range.
7
/ 16
1.11 cm
"
2 15/16"
24 "
21 7/16"
"
2 11/16"
18 "
19 7/8 "
12 "
17 1/2 "
6"
14
3
/4
1.91 cm
6.83 cm
"
"
2 3 /8
"
1 15/16"
1 1/8
2.86 cm
1 5/ 8
7.46 cm
4.13 cm
2 3/8 "
6.03 cm
Designed by:
6.03 cm
4.92 cm
1 3/ 8 "
3.49 cm
54.45 cm
50.48 cm
44.45cm
"
35.56 cm
7 1/ 2 "
19.05 cm
Charlie Smith & Tom Parrish
31
7'5"A
ROCKER
THICKNESS
6"
15.24 cm
"
3 9/16
9.05 cm
"
2 1/16
5.24 cm
"
1 3/16
3.02 cm
11
/16
1.75 cm
"
WIDTH
"
4 3/4
12.07 cm
1"
2.54 cm
"
1 1/2
3.81 cm
6"
2"
12 "
2 3/8 "
18 "
"
24 "
5.08 cm
6.03 cm
2 5/8
6.67 cm
11 "
27.94 cm
"
15 3/16
38.58 cm
18 "
(55.56 cm)
(7.62 cm)
45.72 cm
"
19 11/16
50.01 cm
(60.2 L)
Available Rockers:
"
1
/8
0.32 cm
"
2 15/16
7.46 cm
36 "
"
21 5/8
54.93 cm
Natural 6-1/8"N 2-3/16"T
-3/4"N
-1/8"N6"
+1/2"N
CF
+1/4"T36"
+1/2"T
7'3"A
+3/16"T18"
+1/2"T
BC
Designer Comments: Will net 7’3” bottom length.
The natural rocker is good for vee in the tail and
3"
Center
7.62 cm
"
21 7/8
55.56 cm
contoured bottom designs. The Hawaii Rocker to be
used for hi-performance styles. I personally like the
7’2EA bottom extended curve glued up with this one
36 "
21 1/4
53.96 cm
2 9/16
6.51 cm
"
24 "
19 3/16
48.74 cm
"
18 "
1/ 2
"
12 "
15 3/8
39.05 cm
"
6"
12 11/16
32.23 cm
2 7/8
7.30 cm
"
"
2 3/8
6.03 cm
1 3/16
3.02 cm
"
2 1/16
5.24 cm
1 5/8
4.13 cm
"
1 3/4
4.45 cm
2 1/8
5.40 cm
"
1
/2
1.27 cm
"
"
"
3
/32
0.24 cm
for a flatter deck design.
"
13
/16
2.06 cm
Designed by:
"
1 3/8
3.49 cm
Pat Rawson
17
"
44.45 cm
"
"
"
8 1/2
21.59 cm
32
7'6"EA
ROCKER
THICKNESS
WIDTH
5 3/ 8
13.65 cm
— 1 1/ 16"
3 7/16"
—1
"
6"
10 15/16
27.78 cm
2 1/16 "
—2
"
12 "
15 5/8
39.69 cm
"
—2
"
18 "
18 11/16
47.47 cm
"
—2
"
24 "
20 5/8
52.39 cm
"
8.73 cm
5.24 cm
1 1/4
3.18 cm
11
/16
1.75 cm
"
2 7/ 8
7.30 cm
2.70 cm
1/ 2
3.81 cm
1/ 16
5.24 cm
1/
2
6.35cm
3/ 4
6.99 cm
"
Maximum Width: 23"
"
"
"
(58.42 cm)
(8.10 cm)
Available Rockers:
"
1
/8
.32 cm
"
—3
1/
8
7.94 cm
36 "
22 5/ 8
57.47 cm
"
Natural 5-9/16"N 2-7/16"T
-1/2"N
-1/4"N24"
-1/8"N6"
-3/8"N18"
-3/8"N12"
+1/4"N
CF
+3/8"T
+3/8"N24"
+1/8"T18"
+1/4"T36"
+1/4"T18"
+1/4"T
+1/4"N10"
6'7"R
+1/4"T
+1/4"T36"
+1/8"T18"
+1/4"T
+3/8"T
BNT
-1/8"N12"
+1/4"T24"+1/8"T
making funboards. It comes with a moderate but
—3
3/16
8.10 cm
"
Center
22 15/16"
58.26 cm
continuous even rocker and foil to make “positioning” the blank for the shape process easy. The deck
contour tapers to keep the foam harder on the rail on
“
—3
"
36 "
22 7/16
56.99 cm
"
— 2 11/16"
24 "
20 3/8
51.75 cm
1
/8
.32 cm
1
/2
1.27 cm
1/
16
7.78 cm
6.83 cm
"
"
7
/8
2.22 cm
"
—2
"
18 "
18 1/2
46.99 cm
"
"
—2
"
12 "
16 1/8
40.96 cm
"
3
/4
4.45 cm
"
—1
"
6"
12 5/8
32.07 cm
2 5/16"
—1
"
1 1/4
3.18 cm
1
5.87 cm
Designed by:
7/ 16
6.19 cm
1/
8
5.40 cm
3/ 4
4.45 cm
3/
8
3.49 cm
Eric Arakawa
the finished shape. It’s a longer version of the 7’1” EA.
"
"
6 5/ 8
16.83 cm
33
7'7"A
ROCKER
THICKNESS
WIDTH
6"
1 3/8
3.50 cm
"
4"
1 5/8
4.13cm
"
6"
1113/16
30.00 cm
"
2 5/16
5.87 cm
"
12 "
16 1/4
41.28 cm
"
2 3/ 4
6.99 cm
"
18 "
"
3 1/16
7.78 cm
"
24 "
15.24 cm
10.16 cm
2 9/16
6.51 cm
1 5/8
4.13 cm
15
/16
2.38 cm
"
4 3/4
12.07 cm
"
"
19 "
"
(228.60 cm)
(58.10 cm)
48.26 cm
20 3/4
52.71 cm
(8.73 cm)
(74.6 L)
Available Rockers:
3
"
/16
.48 cm
3
"
7/16
8.73 cm
36 "
"
22 11/16
57.63 cm
Natural 6-1/8"N 2-1/4"T
-1/2"N17"
-1/4"N18"
-3/8"N18"
-3/8"N
707A
+5/16"T36"
+1/2"T24"
7'5"A
NCRV
BN +1/4"T
-1/2"T
+3/8"T18"
Designer Comments: The thicker 7’7” A blank easily
nets a 7’5” bottom length. The natural rocker is good
3 7/16
8.73 cm
"
Center
"
22 7/8
58.10 cm
for vee in the tail and contoured bottom designs. The
Hawaii Rocker to be used for hi-performance styles. I
personally like the 7’8EA bottom curve (Hawaii Rocker)
1
/8
"
.32 cm
3 5/16"
8.41 cm
36 "
22 1/8 "
56.20 cm
9
/16
1.43 cm
2 7/8
7.30 cm
"
"
2 5/8
6.67 cm
"
18 "
18 1/8
46.04 cm
"
2 5/16
5.87 cm
"
12 "
16 1/8
40.96 cm
"
1 15/16
4.92 cm
"
6"
13 1/2
34.29 cm
2 3/16"
1 1/ 2
3.81 cm
"
"
13
/16
2.06 cm
1 1/4
3.18 cm
1
11
/16
4.29 cm
5.56 cm
Designed by:
Pat Rawson
24 "
glued up with this one for a flatter deck design for
a bigger rider.
"
19 15/16
50.64 cm
"
"
"
"
9 3/4
24.77 cm
34
7'8"EA
ROCKER
"
6 3/16
15.72 cm
"
4
10.16 cm
"
2 1/2
6.35 cm
"
1 1/2
3.81 cm
"
13
/16
2.06 cm
THICKNESS
WIDTH
"
1
"
3 3/16
8.01 cm
2.54 cm
"
1 3/8
3.49 cm
"
1 13/16
4.60 cm
"
2 1/4
5.72 cm
"
2 9/16
6.51 cm
6"
12 "
18 "
24 "
"
8 7/8
22.54 cm
(55.56 cm)
(7.62 cm)
12 3/ 4 "
32.39 cm
16 "
40.64 cm
(57.5 L)
18 3/16"
46.20 cm
Available Rockers:
"
1
/8
0.32 cm
"
3
7.62 cm
36 "
21 "
53.34 cm
Designer Comments: Designed in series with the
7’2” EA to yield guns in the 7’0” to 7’7” range. This
3"
Center
7.62 cm
"
21 7/8
55.56 cm
blank is a versatile high performance semi-gun. The
rocker and foil will accommodate a wide variety of
bottom contours.
"
2 7/ 8
7.30 cm
"
1
/8
0.32 cm
5
/8
1.59 cm
1
"
2.54 cm
1 3/ 8 "
3.49 cm
36 "
21 1/8
53.66 cm
2 9/16
6.51 cm
"
24 "
18 13/16
47.78 cm
2 5/16
5.87 cm
"
18 "
16 7/ 8
42.86 cm
2"
12 "
14 1/2
36.83 cm
6"
11 3/8
28.89 cm
5.08 cm
"
15
/16
4.92 cm
"
1 5/ 8
4.13 cm
"
1 3/8
3.49 cm
1
2 5/8
6.67 cm
Designed by:
"
"
"
Eric Arakawa
"
"
"
"
"
6 9/16
16.67 cm
35
7'9"H
3 1/2
"
8.89 cm
"
1 1/8
2.86 cm
6"
16 1/4
41.28 cm
"
12 "
19 3/ 4
50.17 cm
"
18 "
21 1/2
54.61 cm
"
24 "
22 5/8
57.47 cm
1 11/16
4.29 cm
"
2 1/16
5.24 cm
6.51 cm
4.76 cm
1 5/16 "
3.33 cm
"
7
/8
2.22 cm
2 5/16
5.87 cm
2 5/8
6.67 cm
"
2 9/16 "
1 7/8
WIDTH
THICKNESS
"
"
"
"
(234.63 cm)
(59.85 cm)
(8.10 cm)
(71.2 L)
Available Rockers:
3
/16
.48 cm
"
3"
36 "
7.62 cm
-3/4"T39"
-1/2"T
-1/2"N
-3/4""T46"
-3/8"N12"
+1/2"N
+1/2"N14"
+1/2"N36
+1/2"N24"
+1-1/2"N30"
+1"N
+1"N36"
+1"N24"
+1"N14"
+3/4"N24"
+3/4"N18"
+3/4"N
7'6"EA
CF
7'10"R
7'9"E
+1"T
Nose
+1/2"T
-3/8"T36"
BC
+1/4"T24"
-1/2"T
BC
+1/4"T16"
+1/4"T24"
-1/4"N20"
Rocker
BN
+3/4"T30"
Rocker
Rocker
"
23 1/2
59.69 cm
Designer Comments: Designed for retro funshapes.
Based on feedback from 7’11”H and 8’4”H, improve3 3/16
8.10 cm
"
Center
"
23 9 /16
59.85 cm
ments were made in the thickness and foil. Should
accomodate many rockers and be an easy hand or
machine shape blank.
"
"
3 1/16
7.78 cm
"
36 "
22 3/ 4
57.79 cm
13
/16
2.06 cm
"
2 5/8
6.67 cm
"
24 "
20 7/8
53.02 cm
1 3/16"
2 3/8
6.03 cm
"
18 "
19 1 /4
48.90 cm
3
/16
.48 cm
3.02 cm
"
"
"
1
"
2 1/16
5.24 cm
"
12 "
17 1/16
43.34 cm
2 1/4
"
1 5/8
4.13 cm
"
6"
13 11/16
34.77 cm
2 15/16"
1 3/16
3.02 cm
"
11
/16
4.29 cm
5.40 cm
7.46 cm
Designed by:
Roger Hinds
"
"
8 1/2
21.59 cm
36
7'9"HX
ROCKER
3 1/2
"
8.89 cm
1 1/ 2
3.81 cm
"
6"
16 1/4
41.28 cm
"
12 "
19 3/ 4
50.17 cm
2 11/16"
18 "
21 1/2"
2 1/16
5.24 cm
"
2 7/16
6.19 cm
6.51 cm
4.76 cm
1 5/16 "
3.33 cm
"
7
/8
2.22 cm
"
2 9/16 "
1 7/8
WIDTH
THICKNESS
6.83 cm
3"
24 "
7.62 cm
"
"
(234.63 cm)
(59.85 cm)
(9.05 cm)
7’9H w/ 3/8” added thickness overall
54.61 cm
"
22 5/8
57.47 cm
(81.0 L)
Available Rockers:
/16 "
3
.48 cm
3 3/8
8.57 cm
"
36 "
+1/2"N24"
"
23 1/2
59.69 cm
Designer Comments: This is a 3/8” thicker version of
the 7’9” H. Designed for retro funshapes. Based on
3
9/16
9.05 cm
"
Center
"
23 9 /16
59.85 cm
feedback from 7’11”H and 8’4”H, improvements were
made in the thickness and foil. Should accomodate
many rockers and be an easy hand or machine shape
/16 "
3
.48 cm
"
13
/16
2.06 cm
1 3/16"
3.02 cm
1
"
2 1/4
"
11
/16
4.29 cm
3 7/16
8.73 cm
3"
7.62 cm
22 3/ 4
57.79 cm
24 "
20 7/8
53.02 cm
"
18 "
19 1 /4
48.90 cm
2 7/16
6.19 cm
"
12 "
17 1/16
43.34 cm
6"
13 11/16
34.77 cm
2
"
2 15/16"
1 9/16
3.97 cm
blank.
"
"
5.08 cm
Designed by:
"
36 "
2 3/4
6.99 cm
5.40 cm
7.46 cm
"
"
Roger Hinds
"
"
"
8 1/2
21.59 cm
37
7'10"SP
ROCKER
THICKNESS
4 1/ 2
11.43 cm
1 3/ 8
3.49 cm
"
2 13/16 "
1 7/ 8
4.76 cm
"
"
7.14 cm
1 13/16 "
4.60 cm
1 1/ 8 "
2.86 cm
"
5
/8
1.59 cm
WIDTH
2 5/16
5.87 cm
6"
"
"
2 11/16
6.83 cm
3"
12 "
18 "
24 "
7.62 cm
"
17 1/8
43.50 cm
(61.91 cm)
"
20 7/16
51.91 cm
(8.57 cm)
"
22 1/4
56.52 cm
Displacement: 2.892 cubic feet (81.9 L)
"
23 5/16
59.21 cm
Introduced: May 2014
Available Rockers:
"
1
/8
0.32 cm
3 5/16
8.41 cm
"
36 "
"
24 5/16
61.75 cm
-1/2"N +1/4"T
-3/4"N
Designer Comments: The 7’10”SP and the 7’4”SP were
built together on Maui and are similar to the 8’4” SP,
3 3/ 8
8.57 cm
"
Center
"
24 3/8
61.91 cm
offering a more complete size progression for mini
longboards. The outlines of both were widened relative to the 8’4” SP to make them usable for a broader
range of designs. Natural rocker is fairly neutral in
/8 "
1
0.32 cm
3 1/4 "
8.26 cm
36 "
23 7/16"
59.53 cm
both the nose and tail, with enough thickness to
shape them up or down, according to the shaper’s
preference. Ideal for boards in the 7’4” to 7’10” range.
9
/ 16
1.43 cm
"
2 7/ 8
7.30 cm
"
13
/ 16
2.06 cm
"
2 5/8
6.67 cm
1 3/16 "
2 5 /16
5.87 cm
3.02 cm
24 "
21 3/8
54.29 cm
"
18 "
19 1/2
49.53 cm
"
12 "
17 1/8
43.50 cm
6"
13 7/ 8
35.24 cm
"
1 7/8
4.76 cm
"
2 1/ 2 "
1 3/ 8
3.49 cm
"
1 3/4
4.45 cm
6.35 cm
Designed by:
"
"
"
"
"
8 1/ 2
21.59 cm
38
7'11"A
ROCKER
7
"
6 /16
16.38 cm
THICKNESS
1
1/8
WIDTH
"
"
3 1/2
8.89 cm
2.86 cm
Tip-to-tip Deck Length: 7' 10 11/16" (240.51cm)
"
13
4 /16
10.64 cm
"
6"
1 11/16
4.24 cm
"
9 1/8
23.18 cm
2
/16"
11
2 /8 "
12 "
1
(55.56 cm)
13 1/4 "
6.83 cm
5.40 cm
1 /16"
4.29 cm
2 7/16
6.19 cm
"
18 "
16 3/8
41.59 cm
1 1/16 "
2 11/16"
24 "
18 5/8 "
33.66 cm
11
2.70 cm
6.83 cm
(7.94 cm)
"
(65.7 L)
47.31 cm
Introduced: September 2006
Available Rockers:
/4 "
1
0.64 cm
3 1/16"
36 "
7.78 cm
21 5/16"
54.13 cm
-3/4"N +3/16"T24"
+1/4"T39"
Designer Comments: This mid size gun blank can net
3 1/8 "
Center
7.94 cm
21 7/ 8 "
55.56 cm
a 7’9” bottom length. The natural rocker is good for
vee in the tail and contoured bottom designs. The
Hawaii Rocker to be used for hi-performance styles.
"
1
/8
0.32 cm
"
3"
36 "
20 5/8
52.39 cm
"
24 "
18 1/8
46.04 cm
7.62 cm
5
/8
1.59 cm
2 5/8
6.99 cm
15
/16
2.38 cm
"
2 3/8
6.03 cm
1 3/ 8
3.49 cm
"
2 1/8
5.40 cm
1 7/ 8 "
1 3/4
4.45 cm
2 1/ 2 "
1 7/16
3.65 cm
4.76 cm
6.35cm
Designed by:
"
"
"
"
18 "
16 3/8
41.59 cm
"
12 "
14 1/8
35.88 cm
"
6"
11 1/4
28.58 cm
"
Pat Rawson
"
"
"
7 1/8
18.10 cm
39
8'0"H
THICKNESS
3 /16"
15/16
9
9.05 cm
2 5/8 "
6.67 cm
1 7/8 "
2.38 cm
2 1/8 "
12 "
"
18 "
21 1/16
53.50 cm
"
24 "
22 3/16
56.36 cm
4.45 cm
1 1/ 4 "
2 1/2
6.35 cm
"
2 13/16
7.14 cm
15 3/8"
6"
5.40 cm
3
/4
1.91 cm
"
1 3/4 "
4.76 cm
3.18 cm
WIDTH
(60.01 cm)
39.05 cm
19 1/16"
(8.41 cm)
48.42 cm
"
"
(78.4 L)
Available Rockers:
3
"
/16
.48 cm
"
3 3/16
8.10 cm
36 "
+1/2"N19
+1/2"N14"
-3/4"N46"
-1/2"T
+1/2"N19"
+1/2"N24"
+1/4"N
+1"N36"
+3/4"N
8'1"EA
DN
+3/4"T
+3/4"T12"
-1/2"T
-3/8"T36"
+1/2"N9"
+1/2"N9"
Rocker +1/4"T12"
"
23 7/16
59.53 cm
Based on feedback from 7’11”H and 8’4”H, improve-
3
"
5/16
8.41 cm
Center
"
23 5/8
60.01 cm
"
36 "
22 5/8
57.47 cm
"
24 "
20 1/2
52.07 cm
2 7/16"
18 "
18 13/16
47.78 cm
16 7/16
41.75 cm
"
3 3/16
8.10 cm
"
2 3/4
6.99 cm
1
/4
.64 cm
13
/16
2.06 cm
1 1/4 "
3.18 cm
6.19 cm
1 3/ 4 "
2 1/8
5.40 cm
"
12 "
2 7/ 8 "
1 3/4
4.45 cm
“
6"
4.45 cm
7.30 cm
3 1/8 "
7.94 cm
Designed by:
"
1 5/16
3.33cm
Roger Hinds
"
"
"
"
13 "
33.02 cm
"
6 3/4
17.15 cm
40
8'1"EA
6 /16"
THICKNESS
7
16.35 cm
6"
— 12 1/8 "
— 1 15/16"
12 "
— 17 1/16"
"
18 "
— 19 13/16"
24 "
— 21 9/16"
"
11.11 cm
3.65 cm
2 7/8 "
1 13/16"
—2
1 1/16"
— 2 13/16"
2.70 cm
8.57 cm
2.54 cm
—1
4.60 cm
— 3 3/8 "
— 1"
4 3/8 "
7.30 cm
WIDTH
7/16
4.92 cm
7/16
6.19 cm
7.14 cm
(61.19 cm)
30.80 cm
(8.57 cm)
43.34 cm
(75.3 L)
50.32 cm
54.77 cm
Available Rockers:
"
1
/4
.64 cm
—3
5/16
8.41 cm
"
36 "
— 23 7/16"
59.53 cm
-1/8"N8"
-1"N
-1"N36"
-7/16"N
-3/8"N12"
-3/8"N18"
-3/4"N
+1/2"T
+1/4"N
CF
+3/4"N19"
+1/4"T18"
+1/4"T12"
8'1"R
+1/2"T
+1/4"T
+3/8"T
+1/2"T36"
+1/4"T20"
+5/8"T36"
+3/8"T12"
BC
-1/8"N16"
Rocker
making funboards. It comes with a moderate but
—3
"
3/8
8.57 cm
Center
— 24 1/16"
61.12 cm
continuous even rocker and foil to make“positioning”
the blank for the shape process easy. It’s a longer
version of the 7’6” EA, but I added width forward to
accommodate wider noses.
/16
.48 cm
"
—3
3/16
"
—2
3/4
3
5
/8
1.59 cm
"
15
/16
2.38 cm
8.10 cm
"
"
6.99 cm
—2
7/16
6.19 cm
"
— 23
24 "
— 21 1/8 "
59.53 cm
53.66 cm
18 "
— 19 1/4 "
— 2 1/8 "
12 "
— 16 3/4"
2"
— 1 11/16"
6"
— 13 3/8"
5.08 cm
4.29 cm
2 11/16"
— 1 5/16"
3.49 cm
6.83 cm
Designed by:
3.33 cm
Eric Arakawa
48.90 cm
1 3/8 "
5.40 cm
"
36 "
7/16
42.55 cm
33.97 cm
— 7 3/4 "
19.69 cm
41
8'2"A
ROCKER
5
— 1 13/16"
6"
— 12 1/ 2"
"
— 2 7/16"
12 "
— 17 3/8"
3"
18 "
— 20
24 "
— 22
/16
6.83 cm
"
1 /16
4.29 cm
1"
2.54 cm
1
/4
4"
"
11
11
"
—
11.11 cm
2
WIDTH
—
"
6 /8
16.83 cm
4 3/8
THICKNESS
"
0.64 cm
1 5/16
3.33 cm
4.60 cm
6.19 cm
—
7.62 cm
—3
3/8
8.57 cm
"
— 3 15/16"
10.00 cm
10.16 cm
31.75 cm
44.13 cm
Maximum Width: 25"
(63.50 cm)
(10.32 cm)
"
1/4
52.07 cm
"
7/16
56.99 cm
Available Rockers:
36 "
— 24 7/16"
62.07 cm
+1/2"N +3/4"T
-3/8"T
Designer Comments: I designed the 8’2” A to be a
serious “big guy” blank for either high performance,
retros, or fun gun styles. It has a performance bot-
— 4 1/16"
10.32 cm
Center
— 63.5025cm"
tom curve and enough volume for 300 lb. surfers. It
should be able to yield 8’0” x 24” x 3 3/4” with ability
to position the overall rocker and nose widths as
needed. Cutting 2” length off the nose will enable a
"
3
/16
0.48 cm
— 3 7/8 "
36 "
9.84 cm
— 24 1/16"
61.12 cm
18 1/2” nose width at 12” back, and facilitate well for
big guy fish designs. My special thanks to Ben Aipa
who provided inspiration on the overall design of this
— 3 3/8 "
24 "
— 21 7/8 "
3"
18 "
— 20 1/8"
"
— 2 5/8 "
12 "
— 17 11/16"
2"
1
— 2 /8 "
6"
— 14 5/16"
"
— 1 3/4 "
/16"
11
1.75 cm
1 1/16"
2.70 cm
1 1/2
3.81 cm
5.08 cm
2 9/16
6.51 cm
Designed by:
8.57 cm
—
7.62 cm
6.68 cm
5.40 cm
4.45 cm
Pat Rawson
blank and the 9’3” A.
55.56 cm
(310) 225-6774 - USBlanks.com
51.12 cm
44.93 cm
36.35 cm
— 9 1/2 "
24.13 cm
42
8'2"AX
ROCKER
THICKNESS
WIDTH
4"
—
"
"
—
4 3/8
11.11 cm
"
— 2 3/16"
6"
— 12 1/ 2"
/16"
— 2 13/16"
12 "
— 17 3/8"
— 3 3/ 8 "
18 "
— 20
24 "
— 22
5
6 /8
16.83 cm
2
11
6.83 cm
"
11
1 /16
4.29 cm
1"
2.54 cm
1 11/16
4.29 cm
5.56 cm
7.14 cm
8.57 cm
—
3 3/ 4
9.53 cm
"
10.16 cm
31.75 cm
44.13 cm
"
1/4
52.07 cm
"
7/16
56.99 cm
Maximum Width: 25"
(63.50 cm)
(11.27 cm)
82A w/ 3/8” added thickness overall
Available Rockers:
-1/2"N18"
Designer Comments: Same as the 8’2”A but shimmed
1
/4
"
0.64 cm
— 4 5/16"
10.95 cm
36 "
— 24 7/16"
62.07 cm
to produce 3/8” thicker than the 8’2” A. I designed
the 8’2” A to be a serious “big guy” blank for either
high performance, retros, or fun gun styles. It has a
performance bottom curve and enough volume for
— 4 7/16"
11.27 cm
Center
— 63.5025cm"
300 lb. surfers. It should be able to yield 8’0” x 24” x 3
3/4”with ability to position the overall rocker and nose
widths as needed. Cutting 2” length off the nose will
enable a 18 1/2” nose width at 12” back, and facilitate
3
"
/16
0.48 cm
— 4 1/4 "
36 "
10.80 cm
— 24
"
1/16
61.12 cm
well for big guy fish designs. My special thanks to Ben
Aipa who provided inspiration on the overall design
of this blank and the 9’3” A.
— 3 3/4 "
24 "
"
— 3 3/8 "
18 "
— 20 1/8"
"
— 3"
12 "
— 17 11/16"
6"
— 14 5/16"
"
11
/16
1.75 cm
1 1/16
2.70 cm
1 1/2
3.81 cm
9.53 cm
8.57 cm
7.62 cm
2"
1
— 2 /2 "
"
— 2 1/8 "
5.08 cm
2 9/16
6.51 cm
Designed by:
6.35 cm
5.40 cm
Pat Rawson
55.56 cm
51.12 cm
44.93 cm
36.35 cm
— 9 1/2 "
24.13 cm
43
8'3"H
ROCKER
4 1/8
THICKNESS
"
WIDTH
1 1/4 "
10.48 cm
3.18 cm
3"
1 5/8
4.13 cm
6"
2 1/16"
12 "
7.62 cm
2 1/8 "
5.40 cm
"
"
5.24 cm
1 7/16
3.65 cm
2
7/16
6.19 cm
"
2
3/4
15
/16
2.38 cm
/4 "
1
.64 cm
"
"
18 "
24 "
6.99 cm
3 3/16 "
8.10 cm
36 "
(250.51 cm)
"
15 1/8
38.42 cm
(60.01 cm)
18 3/4 "
47.63 cm
(8.57 cm)
"
20 3/4
52.71 cm
(77.6 L)
22 "
55.88 cm
23 5/16"
59.21 cm
Available Rockers:
+1"N36"
+1/4"N9"
+1/4"N12"
+1/2"N36"
+1/2"N24"
+1/2"N
+3/8"N14"
+3/8"N
+3/4"N
8'6"EA
+3/8"N36"
+3/8"N24"
+3/8"N18"
+3/8"N15"
CF
8'3"E
BC
-3/8"T36"
BC
DC
Rocker
+1/4"T18"
Rocker
Rocker
Based on feedback from 7’11”H and 8’4”H, improve-
3 /8 "
3
Center
8.57 cm
"
23 5/8
60.01 cm
"
36 "
22 5 /8
57.47 cm
"
2 13/16
7.14 cm
"
24 "
20 1/ 2
52.07 cm
"
"
18 "
18 3/4
47.63 cm
2 1/16"
12 "
"
3 3/16
8.10 cm
/16
2.06 cm
"
1 1/ 4 "
2 7/16
6.19 cm
7
/32
.56 cm
13
3.18 cm
1 7/8 "
4.76 cm
2 1/ 2 "
6.35 cm
3 3/16"
8.10 cm
Designed by:
5.24 cm
"
1 11/16
4.29 cm
"
1 1/8
2.86 cm
Roger Hinds
6"
"
16 5/16 "
41.43 cm
"
12 7/8
32.70 cm
"
7 5/8
19.37 cm
44
8'4"SP
ROCKER
THICKNESS
4 3/4 "
12.07 cm
3 1/4 "
8.26 cm
2 5/32"
1 5/16"
1 13/16"
"
"
9/16
1 /8
3.49 cm
/16"
13
2.06 cm
6"
15 13/16"
40.16 cm
4.60 cm
2 1/4
5.72 cm
12 "
18 "
2 13/16"
24 "
22 1/2"
7.14 cm
(61.44 cm)
"
"
2
19 1/4
48.90 cm
21 3/16
53.82 cm
6.51 cm
3.33 cm
5.48 cm
3
WIDTH
(8.57 cm)
"
(84.0 L)
57.15 cm
/16"
3
.48 cm
3 3/16"
8.10 cm
36 "
23 7/8 "
60.64 cm
Available Rockers:
CF 8'5"S BC Rocker
+1/4"T18"
+1/2"T18"
Designer Comments: This blank reflects four decades
"
3 3/8
8.57 cm
Center
24 1/16"
61.12 cm
of collaboration between Charlie Smith and Tom
Parrish in one form or another. The 8’4” SP allows
for funboard, mini-longboard and noserider style
templates. Natural rocker is fairly neutral in both the
nose and tail, with enough thickness to shape it up or
"
"
1
/4
.66 cm
3 1/4
8.26 cm
/4
1.91 cm
"
2 7/8
7.30 cm
2.86 cm
"
2 5/8
6.67 cm
1 9/16"
2 1/4
3
1 1/8
20 5/8
52.39 cm
"
18 "
18 13/16
47.78 cm
12 "
16 1/2"
"
1 7/8
4.76 cm
2 13/16"
7.14cm
Designed by:
"
"
"
1 3/8
3.49 cm
6"
down, according to the shaper’s preference. Ideal for
boards in the 7’10” to 8’4” range.
24 "
5.72 cm
5.40 cm
"
22 7/8
58.10 cm
"
3.97 cm
2 1/8
36 "
"
"
41.91 cm
13 "
33.02 cm
"
5 1/4
13.34 cm
45
8'4"SPX
ROCKER
THICKNESS
4 /4 "
3
12.07 cm
3 1/4 "
8.26 cm
2 5/32"
5.48 cm
1 3/8
"
3.49 cm
/16"
13
2.06 cm
1
11/16
4.29 cm
WIDTH
"
2 3/16 "
6"
2 5/8 "
12 "
3 1/16"
18 "
3 3/16"
24 "
40.16 cm
5.56 cm
6.67 cm
7.78 cm
8.10 cm
15 13/16"
19 1/4"
48.90 cm
21 3/16"
(61.44 cm)
(9.53 cm)
8’4 SP w/ 3/8” added thickness overall
53.82 cm
22 1/2"
(94.4 L)
57.15 cm
/16"
3
.48 cm
3 9/16"
9.05 cm
36 "
23 7/8 "
60.64 cm
Available Rockers:
3 3/4
9.53 cm
"
Center
24 1/16"
61.12 cm
the of the 8’4” SP. This blank reflects four decades of
collaboration between Charlie Smith and Tom Parrish
in one form or another. The 8’4”SP allows for funboard,
mini-longboard and noserider style templates. Natural
1
/4
"
.66 cm
3 5/8 "
9.21 cm
36 "
22 7/8 "
58.10 cm
rocker is fairly neutral in both the nose and tail, with
enough thickness to shape it up or down, according
to the shaper’s preference. Ideal for boards in the
7’10” to 8’4” range.
3
/4
"
1.91 cm
1 1/8
"
3 1/4 "
24 "
20 5/8
52.39 cm
3"
18 "
18 13/16
47.78 cm
12 "
16 1/2
41.91 cm
8.26 cm
2.86 cm
7.62 cm
1 9/16"
2 5/8
6.67 cm
3.97 cm
2 1/8
"
5.40 cm
2 13/16"
7.14cm
Designed by:
"
2 1/4 "
5.72 cm
1 3/4 "
4.45 cm
6"
"
"
"
13 "
33.02 cm
5 1/4 "
13.34 cm
46
8'5"A
ROCKER
6 3/4 "
17.15 cm
4 9/16"
11.59 cm
"
2 7/8
7.30 cm
1 11/16"
4.29 cm
1
"
2.54 cm
THICKNESS
WIDTH
"
"
Maximum Width: 22"
1 1/4
"
1 3/4
"
6"
/8
22.54 cm
"
12 "
12 15/16
32.86 cm
2 11/16
6.83 cm
"
18 "
"
24 "
3 1/2
8.89 cm
3.18 cm
4.45 cm
2 3/16
5.56 cm
3
7.62 cm
8
7
"
16 "
40.64 cm
"
18 3/ 8
46.67 cm
(55.88 cm)
(8.57 cm)
(76.5 L)
Available Rockers:
"
9
/32
0.71 cm
"
36 "
3 5/16
8.41 cm
"
21 1/16
53.50 cm
Natrual Rocker 6-7/8"N 2-7/16"T
+1/4"T24"
Designer Comments: The 8’5’’A blank easily nets an
8’4’’ bottom length. The natural rocker is good for vee
3 3/8
21 15/16"
"
Center
"
36 "
20 1/2
52.07 cm
"
24 "
17 15/16
45.56 cm
"
18 "
16 1/8
40.96 cm
"
8.57 cm
55.72 cm
"
3 3/16
8.10 cm
"
2 3/4
6.99 cm
1"
2 1/2
6.35 cm
"
2 3/16
5.56 cm
12 "
13 11/16
34.77 cm
1 13/16"
6"
10 9/16"
2.54 cm
1 3/8
3.49 cm
1
/8 "
7
4.76 cm
2 7/16"
6.19 cm
Designed by:
4.60 cm
1 7/16"
3.65 cm
Pat Rawson
Rocker to be used for hi-performance styles.
"
7
/32
0.56 cm
5
/8
1.59 cm
in the tail and contoured bottom designs. The Hawaii
"
"
26.83 cm
6 1/2 "
16.51 cm
47
8'6"EA
6 9/16"
16.67 cm
4 7/16 "
11.27 cm
THICKNESS
WIDTH
1 1/16"
2 1/2
2.70 cm
1 9/16"
3.97 cm
2 1/2
6.35 cm
"
18 "
19 1/2
49.53 cm
"
24 "
21 3/8
54.29 cm
"
2 7/ 8
7.30 cm
1 5/32
2.94 cm
(257.81 cm)
(61.12cm)
29.25 cm
16 1/2
41.91 cm
"
7
/8
4.76 cm
11 1/2 "
12 "
2 1/16
5.24 cm
1
6"
"
"
2 7/ 8
7.30 cm
6.35 cm
"
"
"
"
(8.57 cm)
(77.0 L)
Available Rockers:
"
5
/16
0.79 cm
"
3 5/16
8.41 cm
36 "
"
23 5/16
59.21 cm
+1/4"N
-3/4"N18"
-3/4"N
-1/2"N36"
-1/2"N24"
-1/2"N12"
CF
+1/4"T18"
+1/4"T
8'7"R+1/4"T
BC Rocker
Designer Comments: This blank is designed to yield
big fun boards and big guy guns.
"
Center
"
36 "
3 3/8
8.57 cm
"
24 1/16
61.12 cm
23 "
7
/32
0.56 cm
"
3 1/8
7.94 cm
"
2 3/4
6.99 cm
"
24 "
20 1/2
52.07 cm
1"
2 1/2
6.35 cm
"
18 "
18 5/8
47.31 cm
1 7/16
3.65 cm
"
2 3/16
5.56 cm
"
12 "
16 3/16
41.12 cm
1 31/32"
1 3/4
4.45 cm
"
6"
12 11/16
32.23 cm
"
1 1/4
3.18 cm
11
/16
1.75 cm
2.54 cm
5.00 cm
2 5/8
6.67 cm
Designed by:
"
Eric Arakawa
58.42 cm
"
"
"
"
7 1/8
18.10 cm
48
8'9"Y
ROCKER
"
1
THICKNESS
"
1 7/8
4.76 cm
2 1/8 "
2 5/16
5.87 cm
"
2 5/8
6.67 cm
3
9.05 cm
5.40 cm
7
/16
3.65 cm
1
"
15
/16
2.38 cm
/32"
9
0.71 cm
WIDTH
"
4 /8
10.48 cm
1 5/16
3.33 cm
"
6"
17 3/8
44.13 cm
"
12 "
20 1/2
52.07 cm
"
18 "
22 1/8
56.20 cm
2 13/16
7.14 cm
"
"
3 1/8
24 "
36 "
7.94 cm
"
"
(265.43 cm)
(63.02cm)
(8.57 cm)
"
(92.1 L)
"
23 3/16
58.90 cm
Available Rockers:
24 1/2 "
+3/8"N18"
+1/2"N
CF
8'7"R BC
8'9"B
BN
+1/8"T18"
Rocker
Rocker
62.23 cm
Designer Comments: This was designed with the
"
48 "
24 13/16
63.02 cm
"
popular 9’3” Y as the reference, and intended for 8’6”
"
Center
24 11/16"
longboards. As compared to the 9’3” Y it has propor-
"
48 "
3 3/16
8.10 cm
"
36 "
23 7/16
59.53 cm
2 7/ 8 "
24 "
21 9/16"
"
18 "
"
12 "
3 5/16
8.41 cm
3 3/8
62.71 cm
8.57 cm
3
5/16
8.41 cm
"
5
/16
0.79 cm
/16"
13
2.06 cm
"
2 5/ 8
6.67 cm
"
2 5/16
5.87 cm
1 1/4
3.18 cm
1 3/4
7.30 cm
4.45 cm
2 3/8 "
1
15/16
6.03 cm
5.08cm
3 3/16"
1 5/16"
8.10 cm
Designed by:
3.33cm
"
6"
Renny Yater
24 1/2"
62.23 cm
tionally less volume, it’s 6” shorter, 1/4” narrower, 1/8”
thinner and a little wider in the tail area.
"
54.77 cm
"
20 1/8
51.12 cm
18
"
45.72 cm
14 5/8 "
37.15 cm
9
"
22.86 cm
49
8'9"YX
ROCKER
"
1
THICKNESS
"
2 1/4
5.72 cm
2 1/8 "
3
9.05 cm
5.40 cm
/16"
7
1
3.65 cm
"
15
/16
2.38 cm
WIDTH
"
4 /8
10.48 cm
1 11/16
4.29 cm
"
6"
17 3/8
44.13 cm
2 11/16
6.83 cm
"
12 "
20 1/2
52.07 cm
3"
18 "
22 1/8 "
7.62 cm
3 3/16
8.10 cm
"
24 "
"
"
(265.43 cm)
(63.02cm)
(9.53 cm)
8’9 Y w/ 3/8” added thickness overall
56.20 cm
"
23 3/16
58.90 cm
(105.7 L)
/32"
9
0.71 cm
3 1/2
"
36 "
8.89 cm
"
24 1/2
62.23 cm
Available Rockers:
3 11/16"
48 "
24 13/16
63.02 cm
3 3/ 4 "
Center
24 11/16"
3 11/16"
48 "
9.37 cm
9.53 cm
9.37 cm
"
of the 8’9” Y, designed with the popular 9’3” Y as the
62.71 cm
reference, and intended for 8’6” longboards. As com-
24 1/2"
pared to the 9’3” Y it has proportionally less volume,
62.23 cm
it’s 6” shorter, 1/4” narrower, 1/8” thinner and a little
wider in the tail area.
3 9/16"
36 "
3 1/ 4 "
2.06 cm
8.26 cm
24 "
1 1/4 "
3"
18 "
2 11/16"
12 "
5
/16"
0.79 cm
/16"
13
3.18 cm
1 3/4
"
4.45 cm
2 3/8 "
9.05 cm
7.62 cm
6.83 cm
2
5/16
"
6.03 cm
5.87 cm
3 3/16"
1 11/ 16"
8.10 cm
Designed by:
4.29 cm
6"
Renny Yater
23 7/16"
59.53 cm
21 9/16"
54.77 cm
20 1/8"
51.12 cm
18
"
45.72 cm
14 5/8 "
37.15 cm
9
"
22.86 cm
50
9'2"A
ROCKER
THICKNESS
1 5/16
3.33 cm
5 3/8
13.65 cm
"
1 11/16
4.29 cm
3 /8
9.21 cm
"
2 3/16
5.56 cm
2 3/8 "
2 5/8
5
6.03 cm
"
1 9/16
3.97 cm
4"
"
7 5/8 "
19.37 cm
WIDTH
10.16 cm
"
6"
(279.40 cm)
(56.52 cm)
"
"
12 "
"
18 "
15 3/4 "
3"
24 "
7.62 cm
"
8 3/4
22.23 cm
12 5/8
32.07 cm
2.67 cm
(8.89 cm)
40.01 cm
18 "
(88.3 L)
45.72 cm
"
1
/2
1.27 cm
"
3 3/8
8.57 cm
36 "
21 "
53.34 cm
Available Rockers:
-1"N18"
-5/8"N36"
CF
9'1" A+1/2"T18"
9'2"R
BC
BC
+1/4"T24"
Rocker
Rocker
Designer Comments: The 9’2” A blank easily nets a
9’2” bottom length. It’s designed for classic big wave
"
3 1/2
8.89 cm
Center
"
22 1/4
56.52 cm
paddle-in guns. The natural rocker is good for vee in the
tail and contoured bottom designs. The Hawaii Rocker
to be used for hi-performance styles.
3
/8
"
0.95 cm
7
/8
"
2.22 cm
1 1/4
36 "
2 5/8 "
24 "
"
18 "
15 1/8
38.42 cm
"
12 "
12 3/4
32.38 cm
"
6"
9 3/4
24.77 cm
7.94 cm
6.67 cm
"
2 3/8
6.03 cm
"
2 1/16
5.24 cm
"
1 11/16
4.29 cm
"
1 3/8
3.49 cm
3.18 cm
1 9/16
3.97 cm
2 1/8
5.40 cm
2 3/4
3 1/8 "
6.99 cm
Designed by:
"
Pat Rawson
20 "
50.80 cm
17 1/8 "
43.50 cm
"
"
"
6
"
15.24 cm
51
9'3"A
ROCKER
WIDTH
THICKNESS
—
4
"
7 11/16
19.56 cm
— 1 3/8 "
5 1/2
13.97 cm
"
— 1 11/16"
6"
— 12 5/16"
"
— 2 1/4 "
12 "
— 17 1/8 "
— 2 7/8"
18 "
— 20 1/4 "
— 3 7/16"
24 "
— 22 1/4 "
"
3 3/4
9.53 cm
"
2 1/2
6.35 cm
"
1 9/16
3.97 cm
10.16 cm
3.49 cm
4.29 cm
5.72 cm
7.30 cm
8.73 cm
31.27 cm
43.50 cm
(64.77 cm)
(10.95 cm)
51.44 cm
56.52 cm
Available Rockers:
"
1
/2
1.27 cm
—
4"
36 "
10.16 cm
— 24 /2"
1
62.23 cm
-1-1/2"N18"
-1"N18"
-2"N36"
+3/4"T36"
-1/2"N12"
+3/4"T36"
Designer Comments: I designed the 9’3” A to be a
very serious “big guy” longer version of the 8’2” A
/16"
1
0.16 cm
— 4 1/4 "
48 "
— 25 5/16"
— 4 5/16"
Center
1
— 25 /2"
— 4 3/16"
48 "
25 1/8"
— 63.82
cm
10.80 cm
10.95 cm
/32"
3
0.24 cm
10.64 cm
64.29 cm
64.77 cm
blank for either high performance, retros or fun gun
styles. Designed with a performance bottom curve
and enough volume for 375 lb. surfers. It should be
able to yield 9’0” x 24.5” x 4” also with ability to position the overall rocker and nose widths as needed.
Cutting 2” of the length off the nose will enable an
18 3/4” nose width at 12” back, and facilitate well for
big guy fish designs. My special thanks to Ben Aipa
7
"
/16
1.11 cm
— 3 7/8 "
36 "
9.84 cm
— 23 7/8"
60.64 cm
who provided inspiration on the overall design of this
blank and the 8’2” A.
— 3 3/8 "
24 "
54.29 cm
— 3 1/16"
18 "
— 19 7/16"
"
— 2 3/4 "
12 "
— 16 15/16"
2 7/16"
1
— 2 /4 "
6"
— 13 5/8"
"
— 1 3/4 "
1"
2.54 cm
"
1 3/8
3.49 cm
1 7/8
4.76 cm
6.19 cm
3 1/16
7.78 cm
Designed by:
8.57 cm
7.78 cm
6.96 cm
5.72 cm
4.45 cm
Pat Rawson
49.37 cm
43.02 cm
34.61 cm
— 8 1/2 "
21.59 cm
52
9'3"AX
ROCKER
WIDTH
THICKNESS
—
4
"
7 11/16
19.56 cm
— 1 3/4 "
5 1/2
13.97 cm
"
— 2 1/16"
6"
— 12 5/16"
"
— 2 5/ 8 "
12 "
— 17 1/8 "
— 3 1/4"
18 "
— 20 1/4 "
"
24 "
— 22 /4 "
"
3 3/4
9.53 cm
"
2 1/2
6.35 cm
"
9
1 /16
3.97 cm
10.16 cm
4.45 cm
5.24 cm
6.67 cm
8.26 cm
—3
13/ 16
9.68 cm
31.27 cm
43.50 cm
51.44 cm
(64.77 cm)
Maximum Thickness: 4 11/16" (11.91 cm)
9’3 A w/ 3/8” added thickness overall
1
56.52 cm
Available Rockers:
"
1
/2
1.27 cm
— 4 3/ 8 "
11.11 cm
36 "
— 24 1/2"
62.23 cm
Designer Comments: This is the 3/8” thicker version
/16"
1
0.16 cm
— 4 5/8 "
48 "
— 25 5/16"
of the 9’3” A. Designed to be a very serious “big guy”
64.29 cm
longer version of the 8’2” A blank for either high per-
— 4 11/16"
Center
1
— 25 /2"
formance, retros or fun gun styles. Designed with a
— 4 9/16"
48 "
25 1/8"
— 63.82
cm
11.75 cm
11.91 cm
/32"
3
0.24 cm
11.59 cm
64.77 cm
performance bottom curve and enough volume for
375 lb. surfers. It should be able to yield 9’0” x 24.5” x
4” also with ability to position the overall rocker and
nose widths as needed. Cutting 2” of the length off
the nose will enable an 18 3/4”nose width at 12”back,
7
"
/16
1.11 cm
— 4 1/4 "
36 "
10.80 cm
— 23 7/8"
60.64 cm
and facilitate well for big guy fish designs. My special
thanks to Ben Aipa who provided inspiration on the
overall design of this blank and the 8’2” A.
— 3 3/4 "
24 "
54.29 cm
— 3 7/16"
18 "
— 19 7/16"
"
— 3 1/ 8 "
12 "
— 16 15/16"
2 7/16"
5
— 2 /8 "
6"
— 13 5/8"
"
— 2 1/8 "
1"
2.54 cm
"
1 3/8
3.49 cm
1 7/8
4.76 cm
6.19 cm
3 1/16
7.78 cm
Designed by:
9.53 cm
8.73 cm
7.94 cm
6.67 cm
5.40 cm
Pat Rawson
49.37 cm
43.02 cm
34.61 cm
— 8 1/2 "
21.59 cm
53
9'3"Y
ROCKER
THICKNESS
4 5/16"
10.95 cm
3 3/16
8.10 cm
"
5
2 /16
5.87 cm
"
"
1 5/8
4.13 cm
1 1/16
2.70 cm
"
WIDTH
"
1 3/ 8
3.49 cm
2"
5.08 cm
6"
"
12 "
2 11/16"
18 "
"
24 "
2
3/8
6.03 cm
6.83 cm
2 7/ 8
7.30 cm
(280.99cm)
"
17 1/ 2
44.45 cm
20
5/8
(63.66 cm)
"
52.39 cm
22 3/16"
(8.89 cm)
56.36 cm
"
23 5/16
59.21 cm
(104.7 L)
"
3
/8
0.95 cm
"
3 1/4
8.26 cm
36 "
"
24 9/16
62.39 cm
Available Rockers:
-1/2"N
-1/2"N36"
-1/2"T
-1/4"N
-15/16"N24"
-3/4"N36"
-3/8"N24"
-5/8"N
+1/2"N
+1/2"N36"
+1/2"N24"
+1"N36"
+1"N
+1/4"N24"
+1/2"T24"
+1/2"T12"
+3/8"N20"
+3/4"T
+3/4"N24"
+3/8"N24"
+5/8"N
CF
9'5"S+3/8"T
+3/8"N12"
+1/4"T36"
-3/8"T56"
+1/2"T
+1/4"T
BC
+3/4"T
+1/2"T18"
-3/4"T36"
+1/4"T24"
+1/4"T14"
-1/4"T
Natural
+1/8"T36"
+1/4"T24"
+1/4"T24"
+1/4"T8"
-3/8"N24"
+1/4"T24"
+5/8"T
/16"
1
0.16 cm
"
3 3/ 8
8.57 cm
"
/16"
1
0.16 cm
48 "
3 1/2
8.89 cm
Center
3 7/16"
48 "
8.73 cm
"
25 1/16
63.66 cm
Designer Comments: Intended for classic longboard
designs under the 9’1” range, the 9’3” Y has proven
24 15/16
63.34 cm
to be one of the most popular blanks. The natural
24 1/2 "
But remember, the further you change the natural
"
62.23 cm
rocker is about in the middle of the demand curve.
rocker curve the wider the wood stringer it needed
to hold it from spring back.
"
3 1/4
8.26 cm
"
36 "
"
2 15/16"
24 "
3
/8
0.95 cm
15
/16
2.38 cm
7.46 cm
"
23 3/8
59.37 cm
21 3/8 "
54.29 cm
"
"
2 11/16
6.83 cm
"
18 "
19 7/8
50.48 cm
"
2 3/8
6.03 cm
"
12 "
17 5/8
44.77 cm
2 9/16
6.51 cm
"
2 1/16
5.24 cm
"
6"
14 3/8
36.51 cm
3 1/4
8.26 cm
"
1 7/16
3.65 cm
1 5/16
3.33 cm
1
13
/16
4.60 cm
Designed by:
"
Renny Yater
"
"
"
9 1/4
23.50 cm
54
9'4"B
ROCKER
4 3/4
12.07 cm
"
1 5/16
3.33 cm
"
1 11/16
4.28 cm
3 1/2
8.89 cm
2 1/2
"
1 3/4
"
WIDTH
THICKNESS
6.35 cm
"
"
6"
17 "
43.18 cm
12 "
2 3/8 "
18 "
22 3/16"
"
24 "
6.03 cm
1 3/16"
2 5/8
6.67 cm
(63.66 cm)
"
2"
4.45 cm
3.02 cm
20 5/16
51.59 cm
5.08 cm
(8.41 cm)
56.36 cm
23 7/16
59.53 cm
"
(96.7 L)
"
7
/16
1.11 cm
"
1
/16
.16 cm
3"
36 "
7.62 cm
"
3 1/4
8.26 cm
"
3 5/16
8.41 cm
/32"
3
.24 cm
"
7
/16
1.11 cm
1 3/32"
2 5/8 "
24 "
"
18 "
18 9/16
47.15 cm
"
12 "
16 5/16
41.43 cm
6"
13 1/4
33.66 cm
2 1/8 "
2 1/8
5.40 cm
2 3/4 "
1 3/4
4.45 cm
"
"
1 1/2
3.81 cm
"
Designed by:
Bruce Jones
+1/2"N12"
-1/2"N
-1-1/2"N
-1/4"N18"
+1/4"N18"
+1/4"N
+1/2"T12"
+1/2"N24"
+1/2"N
+1/4"N24"
+1/8"T36"
+1/4"T24"
+1/4"T12"
+3/4"N
+3/8"N24"
+3/8"N18"
CF
9'1"T
9'3"
9'5"S
9'9"
-1/2"T
BC
+3/4"T
BC
+1"N
+1/8"T36"
+1/8"T18"
-1/2"T18"
+1/4"T15"
+1/2"T36"
+1/8"T12"
Rocker
Rocker
-1/4"T36"
+1"T +1/8"T18"
Designer Comments: From the original 9’4”B plug,
make it a more shaper friendly blank, close tolerance
for strength, will net 24” x 3 1/8“. Bottom rockers from
36 "
7.62 cm
2 3/8
6.03 cm
3 1/2
8.89 cm
"
3"
8.26 cm
1 9/16"
6.96 cm
24 7/8
63.18 cm
Available Rockers:
with thickness added to the tail area of the deck to
48 "
6.67 cm
5.40 cm
Center
"
25 1/16
63.66 cm
3 1/4 "
2.78 cm
3.97 cm
48 "
"
24 13/16
63.02 cm
24 1/8 "
the previous 9’4”B will work well with this blank.
61.28 cm
22 5/8
57.47 cm
"
20 1/4"
51.44 cm
"
"
"
"
7 1/2
19.05 cm
55
9'5"M
ROCKER
THICKNESS
"
4 13/16"
1 3/8
3.49 cm
3 7/16"
1 3/4
4.45 cm
12.22 cm
8.73 cm
2 /16"
7
6.19 cm
1
3
/4 "
4.45 cm
"
1 3/16
3.02 cm
WI DTH
"
6"
"
16 5/8
42.23 cm
"
12 "
20 /4
51.44 cm
2 3/8 "
18 "
22 1/8 "
"
24 "
2 5/8
6.67 cm
1
(62.71 cm)
"
2 1/16
5.24 cm
6.03 cm
(8.10 cm)
56.20 cm
"
23 3/16
58.90 cm
(92.7 L)
Introduced: August 2007
"
7
/16
1.11 cm
"
1
/16
0.16 cm
"
2 15/16
7.46 cm
"
3 3/16
8.10 cm
36 "
"
24 7/16
62.07 cm
Available Rockers:
Natural Rocker 5"N 3-11/16"T
-1/4"NBC
-1/4"N18"
+1/8"N8"
-5/8"N
-3/4"N24"
9'3"Y
+3/8"N24"
9'4"B
-1/2"N
-1/4"T24"
Rocker
1-/2"N40"
+1/8"T8"
-1/4"T18"
BC Rocker
48 "
"
24 11/16
62.71 cm
Designer Comments: This is a versatile high performance longboard blank designed to accommodate
3 3/16"
Center
62.07 cm
8.10 cm
/16"
1
0.16 cm
3 3/16"
8.10 cm
24 7/16"
48 "
23 7/ 8 "
60.64 cm
both machine and hand shaping. The deck is moderately flat with a slight taper out toward the tail
to ensure maximum strength. It has slightly more
volume in the nose and tail to allow more rocker to
be shaped in if desired.
"
"
36 "
22 7/16
56.99 cm
1 /8 "
2 11/16
6.83 cm
"
24 "
1
20 /16
50.96 cm
1 9/16"
2 7/16
6.19 cm
"
18 "
18 5/16
46.51 cm
"
2 1/8
5.40 cm
"
12 "
"
6"
"
7
/16
1.11 cm
3
7.62 cm
1
2.86 cm
3.97 cm
2 1/8
5.40 cm
2
/16"
13
7.14 cm
3 5/8
9.21 cm
"
Designed by:
1 3 /4
4.45 cm
"
1 3/8
3.49 cm
Matt Yerxa
"
"
16 "
40.64 cm
"
12 3/4
32.39 cm
6
"
15.24 cm
56
9'8"Y
ROCKER
THICKNESS
1 5/8
4.13 cm
5
"
2 1/8
5.40 cm
3
"
1/
3 /16
8.41 cm
2 /8
6.03 cm
1 11/16"
4.29 cm
1 1/ 8
2.86 cm
"
"
"
4 1/2
11.43 cm
WIDTH
"
17 /16
43.97 cm
2"
12 "
20 / 4 "
13/
16
7.14 cm
"
18 "
22 3/16"
"
24 "
23 5/16"
2
6.35 cm
2
3
7.62 cm
(294.01 cm)
"
6"
5
3
(64.14 cm)
52.71 cm
(9.21 cm)
56.36 cm
59.21 cm
(118.7 L)
"
7
/16
1.11 cm
1
"
/16
0.16 cm
"
3 1/4
8.26 cm
"
3 1/2
8.89 cm
36 "
48 "
"
24 5/8
62.55 cm
"
25 1/4
64.14 cm
Available Rockers:
-1/2"N
-1/2"N36"
-1/2"N24"
-15/16"N24"
-1/4"T24"
-3/8"N
-3/4"T
-3/4"N
+1/2"N24"
+1/2"N18"
+1/2"N
+1/4"N
+1/2"T36"
+1/2"T24"
+1/2"T12"
+1"N15"
+3/4"N
+5/8"N18"
+3/8"N36"
+3/4"N48"
+3/4"N24"
CF
Reverse
9'5"S-1/8"T
9'9"
9'9"W
+1/2"T
Natural
+1/4"T
+3/4"T
+3/8"T
Rocker
-3/4"N18"
BC
BC
+1/2"T18"
+3/4"T18"
Rocker
+1/8"T36"
Rocker
DNBC
Rocker
Rocker
+1/4"T24"
Designer Comments: Intended for classic longboard
designs under the 9’6” range. The natural rocker is
3 5/8
9.21 cm
"
Center
"
25 3/16
63.98 cm
about in the middle of the demand curve. But remember, the further you change the natural rocker
curve the wider the wood stringer it needed to hold
"
48 "
24 5/8
62.55 cm
"
36 "
23 1/2
59.69 cm
"
3 9/16
9.05 cm
"
3 3/8
8.57 cm
1
/8
0.38 cm
1
/2
1.27 cm
"
it from spring back.
"
"
1 1/8
2.86 cm
3"
7.62 cm
"
24 "
21 1/2
54.61 cm
"
2 3/4
6.96 cm
"
18 "
19 3/4
50.17 cm
"
2 1/2
6.35 cm
"
12 "
5
17 / 8
44.77 cm
"
2 3/16
5.56 cm
"
6"
14 1/4
36.20 cm
"
1 1/2
3.81 cm
1 5/ 8
4.13 cm
2 1/8
5.40 cm
2 3/4
6.99 cm
3 5/8
9.21 cm
Designed by:
"
Renny Yater
"
"
"
"
9 1/8
23.18 cm
57
9'9"A
ROCKER
THICKNESS
WIDTH
7 /16
19.53 cm
"
1 3/8
3.49 cm
"
5 7/16
13.81 cm
"
1 3/4
4.46 cm
"
6"
8 5/8
21.91 cm
"
2 1/8
5.40 cm
"
12 "
12 7/16
31.59 cm
"
1
"
18 "
15 5/16
38.89 cm
"
24 "
17 5/8
44.77 cm
11
3 3/4
9.53 cm
1
2 /2
2 /2
6.35 cm
6.35 cm
1 11/16"
2 15/16
7.46 cm
4.29 cm
3"
7.62 cm
"
(295.59 cm)
(56.99 cm)
"
"
"
(9.37 cm)
(91.5 L)
"
5
/8
1.59 cm
"
5
/32
0.40 cm
"
3 3/8
8.57 cm
"
3 5/8
9.21 cm
36 "
48 "
"
20 11/16
52.55 cm
22 3/16
56.36 cm
"
Available Rockers:
-1"N18"
-1/2"N24"
CF
+1"N
+1/4"T24"
-3/8"N30"
9'9"A+1/2"T18"
BC Rocker
Designer Comments: The 9’9” A easily nets a 9’8”
bottom length and is intended for big wave paddle
3 5/8 "
Center
9.21 cm
22 7/16"
56.99 cm
guns. The natural rocker is good for vee in the tail and
contoured bottom designs. The Hawaii Rocker to be
used for hi-performance styles.
"
48 "
21 3/4
55.25 cm
"
36 "
20 1/16
50.96 cm
/8 "
3 7/16
8.73 cm
"
3 1/16
7.78 cm
1
0.32 cm
1
/2
1.27 cm
"
"
24 "
17 3/16
43.66 cm
"
18 "
15 1/4
38.74 cm
"
12 "
12 3/4
32.39 cm
"
6"
9 13/16
24.92 cm
2 5/8
6.67 cm
"
2 5/16
5.87 cm
1 1/2
3.81 cm
"
1 15/16
4.92 cm
2 1/2
"
"
1 1/8
2.86 cm
2
5.08 cm
"
1 3/4
4.45 cm
"
1 7/16
3.65 cm
6.35 cm
3 1/8
7.94 cm
Designed by:
"
Pat Rawson
"
"
"
"
"
5 1/2
13.97 cm
58
9'9"AX
ROCKER
THICKNESS
7 11/16
19.53 cm
"
1 3/4
4.43 cm
"
"
1/8
"
7
5 /16
13.81 cm
2
5.41 cm
WIDTH
3"
7.62 cm
6"
3 3/4 "
2 1/2
6.35 cm
"
12 "
"
2 7/8
7.30 cm
"
18 "
1 /16"
3 5/16
8.41 cm
"
24 "
9.53 cm
2 1/2
6.35 cm
11
4.29 cm
8
5/8
"
21.91 cm
12 /16"
7
(56.99 cm)
(10.16 cm)
31.59 cm
"
15 5/16
38.89 cm
5
17 /8
44.77 cm
"
"
5
/8
1.59 cm
"
36 "
3 3/4
9.52 cm
(295.59 cm)
"
20 11/16
52.55 cm
(101.4 L)
Available Rockers:
"
5
/32
0.40 cm
4"
10.16 cm
48 "
22 3/16
56.36 cm
"
Designer Comments: This is the 9’9” A with an addi-
4"
Center
10.16 cm
"
22 7/16
56.99 cm
tional 3/8” thickness. The 9’9” A easily nets a 9’8” bottom
length and is intended for big wave paddle guns. The
natural rocker is good for vee in the tail and contoured
"
1
/8
0.32 cm
13
3 /16
9.68 cm
"
48 "
"
3
21 /4
55.25 cm
bottom designs. The Hawaii Rocker to be used for
"
1
/2
1.27 cm
"
1 1/8
2.86 cm
1 1/2
"
3.81 cm
20 1/16
50.96 cm
3"
24 "
17 3/16
43.66 cm
/16"
18 "
15 1/4
"
12 "
12 3/4
32.39 cm
"
6"
9 13/16
24.92 cm
7.62 cm
2
11
6.82 cm
2 3/ 8
6.03 cm
"
2 1/8
5.41cm
"
1 13/16
4.60 cm
6.35 cm
3 1/8
7.94 cm
"
36 "
"
1 15/16
4.92 cm
2 1/2
"
3 7/16
8.73 cm
"
Designed by: Pat Rawson
"
(310) 225-6774 - USBlanks.com
"
38.74 cm
"
"
"
5 1/2
13.97 cm
59
9'9"B
ROCKER
"
THICKNESS
4 7/16
11.27 cm
3 /8
"
1
"
3
8.57 cm
2
/2
6.35 cm
1
"
3
/4
4.45 cm
"
1
/4
3.18 cm
1
1 1/4
3.18 cm
"
13
"
2
1/4
"
12 "
2
11
/16"
18 "
"
24 "
1 /16
4.60 cm
5.72 cm
6.83 cm
3
7.62 cm
WIDTH
6"
3
(297.50cm)
"
16 /8
41.59 cm
"
15
(63.34 cm)
(9.53 cm)
19 /16
50.64 cm
7
21 / 8 "
55.56 cm
"
23 1/16
58.58 cm
(113.9 L)
"
1
/2
1.27 cm
3
/32
.24 cm
"
"
3 1/2
8.89 cm
"
3 3/4
9.53 cm
36 "
48 "
"
24 7/16
62.07 cm
Available Rockers:
24 15/16
63.34 cm
"
-1"N18"
-1-1/2"N
+1/2"N18"
+1/2"N15"
+1/2"N
+1/2"N24"
+1/4"N
+1/2"T30"
+1/2"T12"
+1"N
+1/4"T
+3/8"N24"
+3/4"N18"
+2-3/4"N24"
+1"N36"
+1"T36"
-1/4"T
+1/2"T18"
-1/2"T24"
+1/2"T12"
Designer Comments: Intended for longboard shapes
from 9’2”to 9’6”, this is a close tolerance blank that will
11
"
3 /16
9.37 cm
Center
"
13
24 /16
63.02 cm
net 24” x 3 1/4 “ maximum dimensions. Natural rocker
will make a nice all-around longboard shape. Rockers
"
1
/8
.32 cm
"
1
/2
1.27 cm
3 5/8
"
48 "
3 5/16
8.41 cm
"
36 "
9.21 cm
24 1/4 "
from the previous 9’8” will work well with this blank.
61.60 cm
"
22 7/ 8
58.10 cm
"
24 "
2 9/16
6.51 cm
"
18 "
18 7/8
47.94 cm
"
2 1/4
5.72 cm
"
12 "
16 7/16
41.75 cm
"
1 7/8
4.76 cm
"
6"
"
1 7/16
3.65 cm
"
/16"
2 7/ 8
7.30 cm
1
"
3
/8
6.03 cm
1
3
3.02 cm
11
/16
4.29 cm
2
3
/16
8.10 cm
3
4
1
/8
10.48 cm
Designed by:
Bruce Jones
9
20 /16"
52.23 cm
"
"
13 "
33.02 cm
"
1
7 /2
19.05 cm
60
10'2"B
ROCKER
"
13/
16
12.22 cm
4
"
5
/8
9.21 cm
3
2
"
5
/8
6.67 cm
7
/8
4.76 cm
1
1 3/8
3.49 cm
"
1 7/8
4.76 cm
"
WIDTH
6"
2 5/16"
12 "
5.87 cm
"
17 1/2
44.45 cm
20 3/4"
"
18 "
22 5/16
56.67 cm
"
2 15/16
7.46cm
"
24 "
7
23 /16
59.53 cm
3 1/4
"
36 "
/16"
1.43 cm
8.26 cm
(63.98 cm)
52.71 cm
2 11/16
6.83 cm
5
/16
3.33 cm
"
1
9
THICKNESS
"
"
24 5/8 "
(8.89 cm)
(120.6 L)
62.63 cm
Available Rockers:
5
/32"
0.40 cm
3 7/16"
8.73 cm
48 "
25 3/16"
63.98 cm
-1/4"N
-1/4"N18"
-1/4"N24"
-1"N
-1"N18"
-3/4"N
+3/4"N
+1"T
+11/16"N
+1/4"T36"
+1/4"N18"
+1/2"T12"
+1/2"T
+1/2"N15"
+1/2"N
-5/8"T
+5/8"N18"
+3/8"T36"
+3/4"T24"
+5/8"T
10'1"Y
CF
10'1"Y
10'5"S
9'9"
Deck
Reverse
-1/4"N24"
+1/2"T
+1/4"T
+1"T
DN
+3/4"T
-1/2"T24"
+1/2"T18"
BC
BC
+1/2"T18"
+3/8"T36"
+1/4"T8"
-1"N
Deck
+1/4"T24"
+1/2"T36"
-1-1/8"N +1"T
from 9’8” to 10’0”, this is a close tolerance blank to net
3 1/2
8.89 cm
"
Center
25 1/8 "
63.82 cm
24” x 3 3/8“ maximum dimensions. Rockers from the
previous 10’1” will work well with this blank. 10’1”Y
natural rocker is available for this blank.
3
/8
0.95 cm
"
48 "
1
24 /2
62.23 cm
"
36 "
23 7/16
59.53 cm
"
3 7/16
8.73cm
"
3 1/4
8.26 cm
1
/16
0.16 cm
"
"
"
2 7/8
7.30 cm
"
24 "
3
21 /8
54.29 cm
"
2 5/8
6.67 cm
"
18 "
19 13/16
50.32 cm
1
13
/16
4.60 cm
"
2 1/4
5.72 cm
"
12 "
17 9/16
44.61 cm
2 1/2
6.35 cm
"
1 13/16
4.60 cm
"
6"
14 1/4
36.20 cm
7
/16
8.73 cm
"
1 5/16
3.33 cm
15
/16
2.38 cm
1 5/16
3.33 cm
3
Designed by:
"
Bruce Jones
"
"
"
"
"
9 1/4
23.50 cm
61
10'2"BX
ROCKER
"
13/
16
12.22 cm
4
"
5
/8
9.21 cm
3
2
"
5
/8
6.67 cm
"
7
/8
4.76 cm
1
1
/16"
5
3.33 cm
THICKNESS
1 5/8
4.13 cm
"
2 1/8
5.40 cm
"
WIDTH
6"
"
17 1/2
44.45 cm
20 3/4"
2 9/16"
12 "
"
18 "
22 5/16
56.67 cm
3 3/16"
24 "
7
23 /16"
6.51 cm
2 15/16
7.47 cm
8.10 cm
"
"
5
/32"
0.40 cm
"
36 "
3 11/16"
48 "
3 1/2
8.90 cm
9.37cm
(9.53 cm)
10’2 B w/ 1/4” added thickness overall
59.53 cm
9
/16
1.43 cm
(63.98 cm)
52.71 cm
"
24 5/8
62.63 cm
25 3/16"
63.98 cm
(130.5 L)
Available Rockers:
-5/8"T
"
3 3/4
9.53 cm
Center
"
25 1/8
63.82 cm
from 9’8” to 10’0”, this is a close tolerance blank to net
24” x 3 3/8“ maximum dimensions. Rockers from the
previous 10’1” will work well with this blank. 10’1”Y
1
/16"
0.16 cm
"
3
/8
0.95 cm
3 11/16"
48 "
"
36 "
9.37cm
3 1/2
8.90 cm
1
24 /2 "
natural rocker is available for this blank.
62.23 cm
"
23 7/16
59.53 cm
"
3 1/8
7.94 cm
"
24 "
3
21 /8
54.29 cm
"
2 7/8
7.31 cm
"
18 "
19 13/16
50.32 cm
1
13
/16
4.60 cm
"
2 1/2
6.36 cm
"
12 "
17 9/16
44.61 cm
2 1/2
6.35 cm
"
2 1/16
5.24 cm
"
6"
14 1/4
36.20 cm
7
/16
8.73 cm
"
1 9/16
3.97 cm
15
/16
2.38 cm
1 5/16
3.33 cm
3
Designed by:
"
Bruce Jones
"
"
"
"
"
9 1/4
23.50 cm
62
10'6"A
ROCKER
"
THICKNESS
WIDTH
4"
8 3/16
20.80 cm
1 7/16
3.65 cm
6 5/32
15.64 cm
"
1 3/4
4.45 cm
6"
8 7/16
21.43 cm
4 7/16"
2 1/8 "
12 "
12 3/8"
"
18 "
15 3/8
39.05 cm
2 15/16
7.46 cm
"
24 "
17 3/4
45.09 cm
"
36 "
"
"
11.27 cm
5.40 cm
"
1
2 /2
6.35 cm
3 1/8
7.94 cm
2 3/16"
5.56 cm
1"
2.54 cm
7
3 /16
8.73cm
10.16 cm
"
(58.90 cm)
31.43 cm
"
(9.53 cm)
"
(106.8 L)
"
21 1/16
53.50 cm
Available Rockers:
"
5
/16
0.79 cm
"
3 3/4
9.53 cm
48 "
"
22 13/16
57.94 cm
+1-1/4"N24" +1/4"T24"
+1/4"T24"
Designer Comments: The 10’6” A easily nets a 10’5”
bottom length. The natural rocker is good for vee in
"
3 3/4
9.53 cm
Rocker to be used for hi-performance styles.
48 "
"
36 "
"
24 "
16 3/4
42.55 cm
3 1/2
8.89 cm
1
the tail and contoured bottom designs. The Hawaii
"
23 3/16
58.90 cm
"
"
1
/4
0.64 cm
Center
21 7/8
55.56 cm
"
(310) 225-6774 - USBlanks.com
"
/4
1.91 cm
"
3 /16
7.78 cm
1 1/2
3.81 cm
"
2 9/16
6.51 cm
"
2 5/16
5.87 cm
"
18 "
14 3/4
37.47 cm
2"
12 "
12 3/8
31.43 cm
6"
9 3/8
23.81 cm
3
15
/16
4.92 cm
1
2 3/8 "
6.03 cm
5.08 cm
"
2 7/ 8
7.30 cm
"
1 13/16
4.60 cm
"
1 1/2
3.81 cm
3 7/16
8.73 cm
Designed by:
"
Pat Rawson
19
13/16
50.32 cm
"
"
"
"
6"
15.24 cm
63
10'6"AX
ROCKER
THICKNESS
8 3/16
20.80 cm
"
1 15/16
4.92 cm
6 5/32"
2 1/4 "
WIDTH
4"
"
10.16 cm
6"
21.43 cm
5.72 cm
"
2 5/ 8
6.67 cm
12 "
12 3/8
31.43 cm
3"
18 "
15 3/8
39.05 cm
24 "
17 3/4
45.09 cm
3 1/8
"
"
7.94 cm
7.62 cm
2 3/16"
3 7/16
8.73 cm
5.56 cm
"
8 7/16"
15.64 cm
4 7/16
11.27 cm
"
"
"
1"
2.54 cm
"
5
/16
0.79 cm
"
15
3 /16
10.00cm
36 "
"
48 "
4 1/4
10.80 cm
(58.90 cm)
(123.7 L)
"
21 1/16
53.50 cm
"
22 13/16
57.94 cm
Available Rockers:
Designer Comments: This is the 10’6” A with 1/2”
"
1
4 /4
10.80 cm
Center
3
"
23 /16
58.90 cm
thickness added. The 10’6”A easily nets a 10’5”bottom
length. The natural rocker is good for vee in the tail
and contoured bottom designs. The Hawaii Rocker
to be used for hi-performance styles.
1
/4
"
0.64 cm
"
3
/4
1.91 cm
4
"
10.16 cm
3 9/16
9.05 cm
"
48 "
36 "
21 7/8 "
55.56 cm
"
19 13/16
50.32 cm
"
24 "
16 3/4
42.55 cm
"
18 "
14 3/4
37.47 cm
12 "
12 3/8
31.43 cm
6"
9 3/8
23.81 cm
"
1
3 /16
7.78 cm
15
/16
4.92 cm
"
13
2 /16
7.14 cm
2 3/8 "
2 1/2
6.35 cm
"
2 5/16
5.87 cm
1 1/2
3.81 cm
1
6.03 cm
2 7/ 8
7.30 cm
"
3 7/16
8.73 cm
Designed by:
"
"
2"
5.08 cm
Pat Rawson
"
"
"
"
6"
15.24 cm
64
10'8"BG
ROCKER
"
THICKNESS
7 15/16
20.16 cm
— 1 15/16"
"
— 2 3/ 8 "
5 7/8
14.92 cm
"
5
4 /16
10.95 cm
"
3 1/8
7.94 cm
"
1
2 /4
5.72 cm
WIDTH
"
—
4.92 cm
6"
6.03 cm
7.14 cm
1/
12 "
— 16 3/4"
"
"
5 /8
9.21 cm
18 "
(64.93 cm)
(11.59 cm)
Introduced: November 2013
— 19 1/2 "
Available Rockers:
49.53 cm
24 "
42.55 cm
4
8.26 cm
—3
— 12 9/16"
31.91 cm
— 2 13/16"
—3
7
17.78 cm
— 21 5/8 "
54.93 cm
Designer Comments: The 10’8 BG was designed and
"
1
2.54 cm
—4
"
1 /8
10.48 cm
36 "
"
— 24
built by Eric Arakawa and Pat Rawson using a com-
1
/8
61.28 cm
bined effort. “The original plan was to build a combo
Big Guy/Gun blank (ala ‘BG’) that could be offset-cut
3
"
/8
0.95 cm
—
7
"
4 /16
11.27 cm
48 "
"
— 25
1/4
64.14 cm
narrower for performance Guns, but have a built-in,
wider stock width suitable for many different options.
The 9’3” A was used as a conceptual starting point,
and the bottom and deck contours are fairly flat in the
—
"
4 17/32
11.51 cm
Center
— 25
"
9
/ 16
64.93 cm
stringer area to enable ordering an offset cut to net
a narrower version (23.5” to 24”) without the normal
peak at the stringer that more contoured blanks
can produce when narrowing by 2”- 3”. The rocker is
1
"
/4
0.64 cm
—
"
4 1/ 4
10.80 cm
48 "
— 24
1/
2
62.23 cm
"
universal and the natural rocker should offer many
design opportunities, due to the ample thickness in
the nose and tail areas.
"
11
/16
1.75 cm
—3
"
7/
8
9.84 cm
36 "
— 22
7/
8
58.10 cm
"
"
—3
"
24 "
— 20
"
1 11/16
4.23 cm
"
—3
1 16
/
7.78 cm
"
18 "
— 18
"
"
—2
"
12 "
— 15 13/16"
3/
"
6"
— 12
"
2
"
—
"
1 1/4
3.18 cm
2 1/8
5.40 cm
3/
8
8.57 cm
3
/4
6.99 cm
"
—2
"
—
2 3/4
6.99 cm
3 7/16
8.73 cm
Designed by:
8
6.03 cm
5.08 cm
3 16
/
51.28 cm
1/ 4
46.36 cm
40.16 cm
1/
2
31.75 cm
8 13/16
22.38 cm
Eric Arakawa & Pat Rawson
65
10'8"Y
ROCKER
"
5 1/4
13.34 cm
3 15/16"
THICKNESS
WIDTH
"
1 9/16
3.97 cm
2 1/8
"
6"
17
5.40 cm
"
2 9/16
6.51 cm
"
12 "
20 1/ 2
52.07 cm
"
2 7/8
7.30 cm
"
18 "
22 3/16
56.36 cm
24 "
23 5/16
59.21 cm
15
/16
7.46 cm
2
2 3/16
5.56 cm
9
1 /16
3.97cm
"
"
1/
3 8
7.94 cm
"
10.00 cm
43.18 cm
"
"
"
36 "
24 11/16
62.71 cm
"
48 "
7
"
3 7/16
8.73 cm
"
3 9/16
9.05 cm
(9.53 cm)
"
11
/16
1.75 cm
(64.77 cm)
"
(135.2 L)
Available Rockers:
1
/4
0.64 cm
"
25 /16
64.61 cm
-1/2"N24" +1/2"T18"
-1/2"N36"
+1/2"T
+1/2"N15"
-5/8"T
+1/2"T
+1/2"T24"
Designer Comments: Designer’s Comments: Intended
for classic longboard designs under the 10’6” range.
"
3 3/4
9.53 cm
Center
25
/2 "
1
The natural rocker is about in the middle of the de-
64.77 cm
mand curve. But remember, the further you change
the natural rocker curve the wider the wood stringer
it needed to hold it from spring back.
/16"
3
3 5/8 "
48 "
24 9/16
62.39 cm
"
36 "
23 1/4
59.06 cm
0.48 cm
9.21 cm
"
3 1/2
8.89 cm
9
/16
1.43 cm
"
"
1 5/ 8
4.13cm
24 "
21 3/16
53.82 cm
"
"
18 "
19 9/16
49.69 cm
"
"
12 "
17 3/8
44.13 cm
"
6"
14 3/16
36.04 cm
3 1/8
7.94 cm
"
2 7/8
7.30 cm
"
2 1/2
6.35 cm
"
2 3/16
5.56 cm
"
1 1/2
3.81 cm
2 3/16
5.56 cm
13
/16
7.14 cm
2
"
"
1 1/4
3.18 cm
3 5/8
9.21 cm
Designed by:
"
Renny Yater
"
"
"
8 1/4
20.96 cm
66
10'10"T
ROCKER
"
5 1/8
13.02 cm
"
—
1 7/8
4.76 cm
—2
"
6"
— 21
"
"
—2
"
12 "
— 25
"
"
—3
"
18 "
— 27
"
"
—
"
24 "
— 29 "
10.48 cm
7.94 cm
2 5/16
5.87 cm
11
WIDTH
"
4 1/8
3 1/8
THICKNESS
1 /16
4.29 cm
3/
8
6.03 cm
7/
8
7.30 cm
1/
4
8.26 cm
3 5/8
9.21 cm
1/
4
53.98 cm
3
/8
64.45 cm
9/
16
70.01 cm
"
(12.70 cm)
73.66 cm
11
/16
1.75 cm
(81.44 cm)
—4
5/
16
10.95 cm
"
36 "
— 30 11/16 "
—
"
48 "
— 31
77.95 cm
(235.3 L)
Available Rockers:
3
"
/16
0.48 cm
4 3/4
12.07 cm
3
/4
80.65 cm
"
10'6"A BC
+1/4"N24"
-1/4"N24"
Designer Comments: I tried to make this Stand Up
blank as versatile as possible. It has plenty of width
—
"
5
Center
— 32 1/16"
81.44 cm
12.70 cm
and thickness to do just about anything in a Stand
Up Paddle surfboard. The rocker should also allow
shapers a wide range of options.
1
/4
0.64 cm
"
—4
3/
4
12.07 cm
"
48 "
— 31 1/16 "
"
—4
1
/2
11.43 cm
"
36 "
— 29
11
/16
1.75 cm
"
1/
2
74.93 cm
—4
"
24 "
— 26
"
— 3 13/16"
18 "
— 24
"
—3
"
12 "
— 21 15/16"
"
—
"
6"
— 18 11/16"
"
—2
1 11/16
4.29 cm
2 1/16
5.24 cm
9
/16
6.51 cm
3 1/16
7.79 cm
1/
16
10.32 cm
9.68 cm
9
/16
9.05 cm
Designed by:
3 1/4
8.26 cm
"
11/
16
6.83 cm
Jeff Timpone
"
"
1 5/16
3.33 cm
2
78.90 cm
5/8
67.63 cm
"
9
/16
62.39 cm
55.72 cm
47.47 cm
—
13
"
33.02 cm
67
5 3/8
"
13.65 cm
"
4 1/4
10.80 cm
3 /16
8.41 cm
"
2 1/2
"
5
6.35 cm
1 7/8
4.76 cm
"
THICKNESS
11'3"D
WIDTH
1 7/16"
3.65 cm
2"
6"
5.08 cm
"
12 "
2 7/8
7.30 cm
"
18 "
3 1/4
8.26 cm
"
24 "
2
7/16
6.19 cm
15 5/8 "
39.69 cm
19
Maximum Width: 26 7/8 "
"
9/16
49.69 cm
"
21 7/8
55.56 cm
23
1/2
(68.26 cm)
(10.72 cm)
(162.7 L)
Introduced: January 1990. Has proved to be as
"
59.69 cm
versatile as outlined in comments. Good proportions for long guns.
Available Rockers:
"
13
/16
2.06 cm
3
"
36 "
"
48 "
13/16
9.68 cm
5/
"
25 8
65.09 cm
10'6"A BC Rocker
+1/4"N24"
-1/4"N24"
Designer Comments: “Shaper’s Delight” will yield
"
1
/4
0.64 cm
4 1/8
10.48 cm
26
1/2
"
67.31 cm
an excellently proportioned 10’6”. When finished, it
will easily float persons up to 250 lbs. An excellent
rental board. Nose rocker can be adjusted up to 6
/2 “ or lowered to 4 1/2 “. Tail rocker can be adjusted
1
4
3/16
"
Center
10.64 cm
7
"
26 /8
68.26 cm
up to 1” or down 1/2 “. Excellent family board. Perfect
San Onofre board or for those crowded days at your
favorite point break. Great for giving lessons. Perfect
for noseriding. May be used for guns with rocker
adjustment and width removed from center prior to
3
/16"
0.48 cm
4 1/16"
10.32 cm
48 "
26 1/16"
66.20 cm
gluing. Suggested minimum stringer thickness: 3/16 “.
Special note: All rockers for this blank will not fit
on redwood or cedar.
9
/16
1.43 cm
3 3/4
9.53 cm
"
1 1/8
2.86 cm
"
3 3/8
8.57 cm
"
24 "
22 1/8
56.20 cm
1 9/16
3.97 cm
"
3 1/16
7.78 cm
"
18 "
20 5/16
51.59 cm
2 1/16
5.24 cm
"
2 11/16
6.83 cm
12 "
17 9/16
44.61 cm
2 5/8
6.67 cm
"
2 5/16
5.87 cm
6"
13 5/8
34.61 cm
3 1/4
8.26cm
"
1 5/8
4.13 cm
"
Designed by:
"
"
"
36 "
"
24 5/8
62.55 cm
"
"
"
"
"
7 1/2
19.05 cm
George Downing & Dale Velzy
68
ROCKER
THICKNESS
8 /8 "
—1
6 1/4 "
—2
3
21.27 cm
15.86 cm
15/16
4.92 cm
"
—2
3 5/16 "
2 /8 "
8.57 cm
1
1 /8
"
2.86 cm
6"
"
6 1/2
16.51 cm
—3
"
18 "
— 20 "
—
"
24 "
— 22
—
4 /8 "
1
10.48 cm
36 "
"
—
3 5/ 8
9.21 cm
Tip-to-tip Deck Length: 11' 8 5/16" (356.39cm)
33.02 cm
12 "
3/
16
8.10 cm
— 13 "
"
13/16
7.14 cm
8.41 cm
3
/8 "
6.03 cm
4 /8
11.74 cm
5
WIDTH
—
"
3
11'8"BG
17 1/16
43.34 cm
50.80 cm
/16
56.04 cm
—
(12.07cm)
(189.7 L)
"
1
(66.92 cm)
Available Rockers:
-1/2"T24"
Shaper's Comments: The 11’8 BG is the
24 /8 "
5
big
brother to the 10’8 BG, and was designed and
62.55 cm
built by Pat Rawson and Eric Arakawa using a
combined effort. “The original plan was to build
3
"
/8
0.95 cm
—
1
"
4 /2
11.43 cm
48 "
— 25
15/16
65.88 cm
"
a combo Big Guy/Gun blank (ala “BG”) that could
be offset-cut narrower for performance Guns,
but have a built-in, wider stock width suitable for
many different options. The 93A was used as
a conceptual starting point, and the bottom and
—
4 3/4 "
12.07 cm
Center
"
3
/8
66.99 cm
— 26
deck contours are fairly flat in the stringer area to
enable ordering an offset cut to net a narrower version (23.5” to 24”) without the normal peak at the
stringer that more contoured blanks can produce
when narrowing by 2” - 3”. The rocker is universal
and the natural rocker should offer many design
"
5
/16
0.79 cm
—
4
"
3/8
48 "
11.10 cm
24 7/8 "
— 63.18 cm
opportunities, due to the ample thickness in the
nose and tail areas.”
3
/4
"
1.91 cm
—
4
10.16 cm
1 3/8 "
—3
1 3/4 "
—3
"
—2
"
—2
3.49 cm
4.45 cm
2 1/4
5.72 cm
2 7/8
7.30 cm
3 9/16 "
9.05 cm
36 "
"
23 "
58.92 cm
"
24 "
"
18 "
— 18
"
12 "
— 15 15/16"
6"
— 12 13/16"
1/
2
8.89 cm
3/16
—
— 20
"
1/2
6.35 cm
— 2 1/8 "
5.40 cm
"
51.75 cm
"
3/8
46.67 cm
8.10 cm
7
/8
7.30 cm
3/8
Designed by:
Pat Rawson &
Eric Arakawa
40.48 cm
32.54 cm
—
"
8 1/4
20.96 cm
69
SUPERFUSED EPS
Our proprietary bead and revolutionary molding and production techniques have allowed
us to develop a surfboard specific product that is superior to any other EPS foam on the
market today. Our Superfused EPS technology allows us to achieve superior bead fusion,
consistency and quality. Combined with our progressive mold designs, we have taken epoxy
board building to a whole new level.
Unlike most other EPS manufacturers, our blanks are shape molded under extreme pressure.
This allows for superior penetration and bead fusion during the molding process that cannot
be achieved in block molding. Combined with our proprietary bead and industry leading
production techniques, our process generates fusion characteristics that simply cannot be
achieved through other methods. The tight fusion means the foam is considerably more air
tight and water tight than any of its predecessors thus eliminating the need for taping or
spackling before machining, or spackling / seal coating before glassing. As a result it glasses
up lighter and stronger as it absorbs less resin but maintains a superior mechanical bond
due to its incredible surface properties.
Our shape molded blanks result in less work for the shaper as our outlines, rockers, and
crowned decks allow the craftsman to zero in on the finished shape much more quickly and
easily. Our molding capabilities also allow us to produce each blank size in different thicknesses which means you can chose the blank that best suits your shape while cutting down
on shaping time and waste.
Due to the incredible strength and memory characteristics of EPS foam many shapers have
experienced “spring back” problems in the past when applying forced rocker adjustments
to this particular type of foam. By not applying any post induced surface tensions we have
eliminated these known “spring back” problems. We accomplish this by starting with an excellent rocker along with increased volume in the nose and tail areas allowing the shaper to
accommodate proprietary custom rocker configurations without having to make physical
adjustments during the glue up process.
Another extremely important aspect of shape molding is the fact that it cuts down on waste
and all EPS scraps are 100% recyclable. Please do your part and check with your local city to
see if they offer a recycling program which you can participate in.
All sizes are offered in both 1.7 pcf and 2.0 pcf densities. Combined with our variable thickness capabilities, US Blanks SUPERFUSED EPS has quickly become the most user friendly,
versatile, industry leading EPS on the market, and has set a new standard world wide.
70
6'5"EPs
SUPERFUSED
ROCKER
5 1/2 "
13.97 cm
"
3 3/8
8.57 cm
7
1 /8
4.76 cm
"
THICKNESS
WIDTH
1 3/8 "
3
4.13 cm
6"
"
12 "
"
18 "
2
5.08 cm
7.62 cm
3.49 cm
1 5/8 "
"
9 1/2 "
(51.75 cm)
24.13 cm
"
13
9/16
16
3/8
(6.99 cm)
34.45 cm
Displacement:
1
2.54 cm
"
7
/16
1.11 cm
"
5
2 /16
5.87 cm
"
2 1/2
6.51 cm
24 "
"
41.59 cm
"
18 7/16
46.83 cm
Available Rockers:
2-3/4" Parabolic
NaturalNatural
6'6"EA
BC
Rocker
6'2"P +1/2"N18"
6'4"EA
6'6"EA
Natural
BC
Rocker
BC
Rocker
Rocker
6'2" -1/4"N18"
6'4"
Template
6'2"
5'10"
6'0"
5'8"
Rocker
Template
Template
5'10"
6'0" Te
Available Densities: 1.7 PCF and 2.0 PCF
2 3/4
6.99 cm
"
Center
"
20 3/8
51.75 cm
Designer Comments: This blank is designed for high
performance short boards up to 20-1/4” in width. At
2-3/4” thick it remains versatile and will accept subtle
rocker adjustments from center.
5
/16
0.79 cm
"
2 5/8
6.67 cm
"
24 "
— 18
"
5
/8
0.79 cm
"
2 3/8
6.03 cm
"
18 "
— 17
"
1 1/16
2.7 cm
"
2 1/8
5.40 cm
"
12 "
1 5/8
4.13 cm
"
1 3/4
4.45 cm
"
6"
2 3/8
6.03 cm
"
1 3/8
3.50 cm
Designed by:
"
Eric Arakawa
7/8
47.94 cm
1/4
43.82 cm
—
15
(310) 225-6774 - USBlanks.com
"
38.1 cm
— 11
"
—
"
7/
8
30.16 cm
6 1/2
16.51 cm
71
6'5x"EPS
SUPERFUSED
ROCKER
"
THICKNESS
WIDTH
"
5 1/2
13.97 cm
1 5/8
4.13 cm
3 3/8
8.57 cm
"
1 7/8
4.76 cm
6"
1 7/8
"
2 1/4 "
12 "
13 9/16
34.45 cm
"
18 "
16 3/8
41.59 cm
"
24 "
18 7/16
46.83 cm
4.76 cm
"
"
5.72 cm
"
2 9/16
6.51 cm
/16"
2 3/4
6.99 cm
1
2.54 cm
7
1.11 cm
3
7.62 cm
(51.75 cm)
"
9 1/2
24.13 cm
"
"
"
(7.62 cm)
Displacement:
Available Rockers:
3" Parabolic Natural
6'6"EA BC
Rocker
Rocker
5'11"
6'2"
5'10"
5'8"
6'4"
6'4"
Template
Fish
Template
Template
Template
Designer Comments: At 3” maximum thickness,
3"
Center
7.62 cm
20 3/8"
51.75 cm
this blank is identical to the previous version with
1/4” additional thickness along the entire length.
Designed for high performance short boards up to
20-1/4” in width, and will also accommodate small
Fish models due to the extra thickness. An ideal blank
for machine shaping.
/16"
5
0.79 cm
5
/8
0.79 cm
1 1/16
2.7 cm
2 7/8 "
7.30 cm
24 "
— 18 7/8"
47.94 cm
"
2 5/8
6.67 cm
"
18 "
— 17 1/4 "
"
2 3/8
6.03 cm
"
12 "
— 15 "
6"
— 11 7/8 "
1 5/8
4.13 cm
"
2 3/8
6.03 cm
"
Designed by:
2
"
5.08 cm
1 5/8
4.13 cm
"
Eric Arakawa
43.82 cm
(310) 225-6774 - USBlanks.com
38.1 cm
30.16 cm
— 6 1/2 "
16.51 cm
72
6'8"EPS
SUPERFUSED
ROCKER
WIDTH
THICKNESS
4"
"
5 3/8
13.65 cm
"
15
/16
2.38 cm
3 5/16
8.41 cm
"
1 5/16"
6"
10 5/8
26.99 cm
1 7/8 "
1 13/16"
12 "
14 9/16"
"
2 1/4 "
18 "
17 3/8
44.13 cm
"
2 1/2 "
24 "
19 3/8"
4.76 cm
1
2.54 cm
1
/2
1.27 cm
3.33 cm
4.60 cm
5.72 cm
6.35 cm
10.16 cm
"
(203.20 cm)
(54.45 cm)
(7.30 cm)
36.99 cm
"
Displacement: Forthcoming
Introduced: February ‘08
49.21 cm
Available Rockers:
6'6"EAParabolic
3-3/8"
Parbolic
Parabolic
Rocker
6'6"
6'6"EA
6'7"P
Natural
EABC
BC
Natural
BC
BC
Rocker
6'4"
6'6"
Rocker
Template
Template
Rocker
5'10"
5'11"
6'6"
6'8"
Template
Template
6'0"
6'2"
6'4"
6'6"
Template
Template
"
1
/16
0.16 cm
"
36 "
21 1/4
53.98 cm
2 7/8 "
Center
21 7/16
54.45 cm
Designer Comments: Designed for versatility to ac-
"
commodate a wide range of board styles from Fishes
13/
16
7.14 cm
2
7.32 cm
1
"
/32
0.08 cm
13
"
/16
7.14 cm
2
36 "
"
"
5
21 /16
54.13 cm
to Big Guy short boards. The manufacturing process
ensures uniform density and fusion throughout, thus
allowing the shaper to use the maximum width of the
"
3
/8
0.95 cm
"
2 9/16"
6.50 cm
24 "
"
19 5/8
49.85 cm
2 5/16"
1 3/32"
1 7/8 "
12 "
15 5/8
39.69 cm
1 11/16"
1 3/8 "
6"
12 1/4
31.12 cm
2.78 cm
4.29 cm
"
2 3/8
6.03 cm
Designed by:
5.87 cm
4.76 cm
3.49 cm
1
18 "
"
2.54 cm
Eric Arakawa
a quick shape and generate less waste.
"
/4
1.91 cm
3
blank if necessary. A closer tolerance version to yeild
17 3/16
43.66 cm
(310) 225-6774 - USBlanks.com
"
"
"
6 3/4
17.15 cm
73
6’8X"EPS
SUPERFUSED
ROCKER
"
3
5 /8
13.65 cm
WIDTH
THICKNESS
1
4"
"
1 /4
3.18 cm
10.16 cm
"
3 5/16
8.41 cm
"
1 5/8
4.13 cm
"
6"
1 7/8
4.76 cm
2 3/16
5.56 cm
12 "
"
2 9/16
6.51 cm
"
18 "
"
1
2.54 cm
"
1
/2
1.27 cm
"
2 7/8
7.30 cm
(203.20 cm)
24 "
(54.45 cm)
"
10 5/8
26.99 cm
(8.57 cm)
"
14 9/16
36.99 cm
"
17 3/8
44.13 cm
"
19 3/8
49.21 cm
Available Rockers:
"
1
/16
0.16 cm
"
36 "
21 1/4
53.98 cm
"
Designer Comments: “ Maximum Volume Version” -
"
Center
21 7/16
54.45 cm
"
Designed for maximum versatility to accommodate
36 "
21 5/16"
3 3/16
8.10 cm
3 1/4
8.26 cm
/32"
1
0.08 cm
3 3/16"
8.10 cm
54.13 cm
a wide range of board styles from Fishes to Big Guy
short boards. The manufacturing process ensures
uniform density and fusion throughout, thus allowing
the shaper to use the maximum width of the blank if
necessary. The nose and tail have added volume to
"
24 "
19 5/8
49.85 cm
"
18 "
17 3/16
43.66 cm
"
12 "
15 5/8
39.69 cm
"
6"
12 1/4
31.12 cm
"
2 7/8
7.30 cm
3
/4
1.91 cm
"
2 5/8
6.67 cm
1 3/32"
2 1/4
5.72 cm
1 11/16"
1 13/16
4.60 cm
"
1 3/8
3.49 cm
3
/8
0.95 cm
2.78 cm
4.29 cm
2 3/8
6.03 cm
Designed by:
"
Eric Arakawa
"
"
yield most types of rockers. A real workhorse blank.
(310) 225-6774 - USBlanks.com
"
"
"
6 3/4
17.15 cm
74
7'2"EPS
SUPERFUSED
ROCKER
"
5 13/16
14.76 cm
1"
"
2 3/4
6.99 cm
2.54 cm
3 1/2
8.89 cm
1 5/16"
2 1/16"
"
"
"
5.24 cm
1 1/8
2.86 cm
9
/16
1.43 cm
WIDTH
THICKNESS
"
6"
9 5/8
24.45 cm
1 7/8
4.76 cm
"
12 "
13 3/4
34.93 cm
2 1/4
5.72 cm
"
18 "
16 3/4
42.55 cm
2 9/16"
24 "
18 13/16
47.78 cm
3.33 cm
6.51 cm
"
(217.81 cm)
(54.77 cm)
Maximum Thickness: 2 15/16” (7.46 cm)
"
"
Available Rockers:
"
1
/16
0.16 cm
2 7/8
7.30 cm
"
36 "
21 1/8
53.66 cm
2 15/16"
Center
21 9/16"
7.46 cm
/16"
1
0.16 cm
2 7/8 "
7.30 cm
54.77 cm
36 "
21 1/4 "
19 1/4
48.90 cm
2 3/16
5.56 cm
"
18 "
17 5/8
44.77 cm
2 1/8
5.40 cm
"
12 "
14 13/16
37.62 cm
"
1 9/16"
6"
11 5/16
28.73 cm
"
1 1/8
2.86 cm
2 9/16
6.51 cm
13
/16
2.06 cm
"
"
1 1/4
3.18 cm
15
/16
4.92 cm
2 7/8
7.30 cm
Designed by:
3.97 cm
"
Eric Arakawa
will accommodate a wide variety of rockers.
53.98 cm
24 "
"
Designer Comments: Designed for high performance
semi-guns. The added volume in the nose and tail
"
1
/2
1.27 cm
1
"
Parabolic Natural
7'1"EA Rocker
Rocker7'0"
7'0"Template
Template
"
"
(310) 225-6774 - USBlanks.com
"
"
5
"
12.7 cm
75
7’2X"EPS
SUPERFUSED
ROCKER
5 13/16"
THICKNESS
"
14.76 cm
1 3/8
3.49 cm
"
11/16
1
3 /2
8.89 cm
WIDTH
1
"
4.29 cm
2
3/4
9
5/8
"
6.99 cm
6"
"
24.45 cm
2 /16"
1
5.24 cm
2
1/4
"
5.72 cm
12 "
13
3/4
(54.77 cm)
"
34.93 cm
"
1 1/8
2.86 cm
"
9
/16
1.43 cm
"
2 5/8
6.67 cm
18 "
2 15/16"
24 "
7.46 cm
(217.81 cm)
(8.41 cm)
"
16 3/4
42.55 cm
"
18 13/16
47.78 cm
Available Rockers:
/16"
1
0.16 cm
3 1/4 "
8.26 cm
3 5/16"
36 "
Center
8.41 cm
21 1/8"
53.66 cm
"
21 9/16
54.77 cm
Designer Comments: “Maximum Volume Version”
- Designed for high performance semi-guns. The
"
1
/16
0.16 cm
3 1/4 "
8.26 cm
"
21 1/4
53.98 cm
24 "
19 1/4
48.90 cm
2 9/16
6.51 cm
"
18 "
17 5/8
44.77 cm
2 1/2
6.35 cm
"
12 "
14 13/16
37.62 cm
"
1 15/16"
6"
11 5/16
28.73 cm
"
1 1/2
3.81 cm
"
2 13/16
7.14 cm
13
/16
2.06 cm
"
"
1 1/4
3.18 cm
15
/16
4.92 cm
2 7/8
7.30 cm
4.92 cm
"
Designed by: Eric Arakawa
added volume in the nose and tail will accommodate
a wide variety of rockers.
"
1
/2
1.27 cm
1
36 "
"
"
(310) 225-6774 - USBlanks.com
"
"
5
"
12.7 cm
76
7'8"EPS
ROCKER
5 9/16"
THICKNESS
WIDTH
2.70 cm
10.16 cm
14.13 cm
1 1/16"
"
11
/16
1.75 cm
"
"
"
12 "
15 3/8
39.05 cm
"
18 "
18 3/8
46.67 cm
24 "
20 7/16
51.91 cm
2 7 /16
6.19 cm
2
"
2 1/16
5.24 cm
"
"
11 1/16
28.10 cm
2 3/16"
1 1/4
3.18 cm
Overall Bottom Length: 7' 9 " (236.22 cm)
6"
1 1/2
3.81 cm
5.57 cm
"
"
"
3 11/16
9.37 cm
4
13 /16
7.14 cm
"
SUPERFUSED
(233.36 cm)
(59.06 cm)
"
1
/8
0.32 cm
3 3/16
8.10 cm
"
36 "
22 11/16
57.63 cm
"
Availablle Rockers:
5-13/16"N2-9/16"T
2-7/8"T
Natural Rocker 5-9/16"N
3 1/4
"
Center
8.26 cm
"
23 1/4
59.06 cm
Designer Comments: This is a multi-purpose blank
which can be used for Fun Boards, Big Guy boards
and Guns. The extra volume will accommodate a
"
1
/8
0.32 cm
"
3 1/8
7.94 cm
"
36 "
22 3/4
57.79 cm
"
2 3/4
6.99 cm
"
24 "
20 5/8
52.39 cm
"
2 1/2
"
18 "
18 5/8
47.31 cm
"
2 3/16
5.56 cm
"
12 "
"
1 3/4
4.45 cm
"
6"
"
1 3 /8
3.49 cm
1
/2
1.27 cm
13
/16
2.06 cm
1 1/4
3.18 cm
1 7/8
4.76 cm
9
/16
6.51 cm
2
Designed by:
6.35 cm
"
Eric Arakawa
wide variety or rocker configurations.
"
"
16
(310) 225-6774 - USBlanks.com
"
40.64 cm
"
12 1/4
31.12 cm
"
5 1/4
13.34 cm
77
7’8X"EPS
ROCKER
5 9/16"
14.13 cm
7
"
Overall Bottom Length: 7' 9 " (236.22 cm)
"
"
"
"
10.16 cm
"
6"
11 1/16
28.10 cm
"
12 "
15 3/8
39.05 cm
1 7/8
4.76 cm
2 3/16"
2 7/16
6.19 cm
5.57 cm
4
"
1 /16
3.65 cm
"
3 11/16
9.37 cm
WIDTH
THICKNESS
"
2 13/16
7.14 cm
"
18 "
18 3/8
46.67 cm
"
3 3/16
8.10 cm
"
24 "
20 7/16
51.91 cm
1 1/4
3.18 cm
11
/16
1.75 cm
SUPERFUSED
(233.36 cm)
(59.06 cm)
(9.21 cm)
"
1
/8
0.32 cm
"
3 9/16
9.05 cm
36 "
22 11/16
57.63 cm
"
Available Rockers:
3 5/8 "
Center
9.21 cm
"
23 1/4
59.06 cm
Designer Comments: “Maximum Volume Version”
- This is a multi-purpose blank which can be used
for Fun Boards, Big Guy boards and Guns. The extra
"
"
"
1
/8
0.32 cm
3 1/2
8.89 cm
36 "
"
3 1/8
7.94 cm
"
24 "
20 5/8
52.39 cm
13
/16
2.06 cm
"
2 7/8 "
18 "
18 5/8
47.31 cm
"
2 9/16
6.51 cm
"
12 "
"
2 1/8
5.40 cm
"
6"
"
1 3/4
4.45 cm
1
/2
1.27 cm
1 1/4
3.18 cm
1 7/8
4.76 cm
9
/16
6.51 cm
2
Designed by:
7.30 cm
"
Eric Arakawa
22 3/4
57.79 cm
volume will accommodate a wide variety or rocker
configurations.
"
"
16
(310) 225-6774 - USBlanks.com
"
40.64 cm
"
12 1/4
31.12 cm
"
5 1/4
13.34 cm
78
8'8"EPS
ROCKER
4 1/4
THICKNESS
"
10.80 cm
3.18 cm
1 3/ 4
4.45 cm
2 /16"
2
1/ 4
2
5/8
2
7/8
3
5.56 cm
1 1/2
"
3.81 cm
15
/16"
2.38 cm
"
1 1/4
"
3 3/16
8.10 cm
WIDTH
17.15 cm
"
5.72 cm
6.67 cm
7.30 cm
"
6 3/4
6"
"
12 "
"
18 "
"
24 "
1713/16
45.24 cm
21
1/16
SUPERFUSED
"
(261.62 cm)
(64.14 cm)
"
53.50 cm
22 3/4 "
57.79 cm
23 3/4 "
60.33 cm
Available Rockers:
1
/4
"
0.64 cm
"
3 1/8
7.94 cm
36 "
3 3/16"
48 "
3 3/16"
Center
8.10 cm
3/16
3
"
48 "
25
"
63.50 cm
251/4
"
64.14 cm
253/16
63.98 cm
25 1/8
63.82 cm
"
"
3-9/16" Natural Rocker
3-3/16"
Designer Comments: This blank is a scaled down
version of the 9’8” EPS. The goal was to design an EPS
mold plug that would accommodate any longboard
shape program in the 7’10” to 8’6” range for machine
cutting purposes. After analyzing our rocker template
data base we came up with a “middle of the road”
1
/8
"
0.32 cm
3 1/8
7.94 cm
"
36 "
245/16"
61.75 cm
rocker profile, and added thickness to the nose and
tail to allow for straight to extreme rocker profiles. The
plan shape and width have also been maximized. This
2 7/8
"
24 "
/16"
2 5/8
6.67 cm
"
18 "
203/4
52.71 cm
1 5/16"
2 5/16
5.87 cm
"
12 "
181/2
46.99 cm
1 15/16"
1 7/8
4.76 cm
"
6"
151/4
38.74 cm
"
1 3/8
3.43 cm
"
1
/2
"
1.27 cm
13
2.06 cm
3.33 cm
4.92 cm
2 1/8
5.40 cm
Designed by:
7.30 cm
Renny Yater
223/8
"
56.83 cm
"
blank is offered in 2 different thicknesses to accommodate for both machine shaping and hand shaping.
(310) 225-6774 - USBlanks.com
"
"
"
9 1/2
24.13 cm
79
8’8X"EPS
THICKNESS
4 1/4
WIDTH
17.15 cm
10.80 cm
3 3/16"
6"
2 3/16"
12 "
"
18 "
/16"
24 "
8.10 cm
5.56 cm
1 1/2
3.81 cm
15
"
6 3/4
"
2.38 cm
1713/16
45.24 cm
21
1/16
SUPERFUSED
"
"
53.50 cm
22 3/4 "
57.79 cm
23 3/4 "
60.33 cm
(261.62 cm)
(64.14 cm)
Introduced: December 2014
Available Rockers:
"
1
/4
0.64 cm
36 "
25
"
Available Densities: 1.7 pcf and 2.0 pcf
63.50 cm
Designer Comments:
48 "
Center
48 "
251/4
"
64.14 cm
253/16
63.98 cm
25 1/8
63.82 cm
"
"
“Maximum Volume Version”
This blank is a scaled down version of the 9’8” EPS.
The goal was to design an EPS mold plug that would
accommodate any longboard shape program in the
7’10”to 8’6”range for machine cutting purposes. After
analyzing our rocker template data base we came up
with a “middle of the road” rocker profile, and added
1
/8
"
36 "
0.32 cm
245/16"
61.75 cm
thickness to the nose and tail to allow for straight to
extreme rocker profiles. The plan shape and width
have also been maximized. This blank is offered in
2 different thicknesses to accommodate for both
"
"
24 "
223/8
56.83 cm
/16"
18 "
203/4
"
1 5/16"
12 "
181/2
"
1 15/16"
6"
151/4
"
1
/2
1.27 cm
13
2.06 cm
3.33 cm
4.92 cm
Designed by:
(310) 225-6774 - USBlanks.com
52.71 cm
46.99 cm
38.74 cm
"
9 1/2
24.13 cm
"
2 1/8
5.40 cm
machine shaping and hand shaping.
Renny Yater
80
9'8"EPS
ROCKER
THICKNESS
"
9
4 /16
11.59 cm
1 3/8
WIDTH
"
7 1/2
19.05 cm
"
3.49 cm
3 7/16"
1 11/16"
8.73 cm
4.29 cm
6"
2 9/16"
2 1/16"
12 "
"
18 "
22 /2
57.15 cm
"
24 "
23 1/2
59.69 cm
6.51 cm
13
"
/16
4.60 cm
1
1 3/16"
3.02 cm
1
/2
"
1.27 cm
5.24 cm
2
3/8
6.03 cm
2 5/8
6.67 cm
2 13/16"
7.14 cm
36 "
17 3/8 "
44.13 cm
20 3/4 "
52.71 cm
1
"
"
"
24 3/4
62.87 cm
SUPERFUSED
(274.96 cm)
(64.14 cm)
(7.62 cm)
Available Rockers:
3-3/4"
EPS
3-3/8"
3"
Natural
Natural
Natural
Rocker
Rocker
Rocker
Available Densities: 2.0 PCF
Designer Comments: This blank is the result of input
"
1
/16
0.16 cm
3"
7.62 cm
3"
7.62 cm
48 "
Center
"
25 1/4
64.14 cm
25 1/8 "
63.82 cm
by several people within the surfboard manufacturing
industry. The goal was to design an EPS mold plug that
would accommodate any longboard shape program
in the 8’10”to 9’6”range for machine cutting purposes.
After analyzing all the rocker templates in our data
/32"
3"
3
0.24 cm
7.62 cm
48 "
"
24 7/8
63.18 cm
base we came up with a “middle of the road” rocker
profile, and added thickness to the nose and tail to
allow for straight to extreme rocker profiles. The plan
/16"
7
1.11 cm
2 13/16"
7.14 cm
36 "
23 7/8 "
60.65 cm
shape and width have also been maximized. This blank
is offered in 3 different thicknesses to accommodate
for both machine shaping and hand shaping. This is
the minimum volume version.
1 1/16"
2.70 cm
2
9/16
"
24 "
21 /8
55.56 cm
20 3/16"
6.51 cm
1 9/16"
2 3/8
6.03 cm
"
18 "
"
2 1/16"
12 "
"
1 3/4
4.45 cm
"
1 1/4
3.18 cm
3.97 cm
2 1/4
5.72 cm
3
7.62 cm
4
10.16 cm
Designed by:
5.24 cm
"
6"
"
Renny Yater
7
"
(310) 225-6774 - USBlanks.com
51.28 cm
18
"
45.72 cm
14 13/16"
37.62 cm
"
9 1/2
24.13 cm
81
9’8X"EPS
ROCKER
"
4 9/16
11.59 cm
THICKNESS
"
6"
2 7/16"
12 "
20 3/4 "
2 3/4
6.99 cm
"
18 "
22 1/2
57.15 cm
"
24 "
23 1/2
59.69 cm
2
5.24 cm
2 9/16"
"
13
/16
4.60 cm
1
"
1 3/16
3.02 cm
7 1/2
19.05 cm
17 3/8
44.13 cm
8.73 cm
6.51 cm
"
"
1 3/4
4.46 cm
3 /16"
7
WIDTH
1/16
6.19 cm
3
7.62 cm
"
SUPERFUSED
(64.14 cm)
52.71 cm
"
"
(274.96 cm)
(8.57 cm)
Available Rockers:
"
1
/2
1.27 cm
3 3/16"
8.10 cm
36 "
"
24 3/4
62.87 cm
"
1
/16
0.16 cm
3 3/8 "
8.57 cm
3
"
3/8
48 "
Center
8.57 cm
"
25 1/4
64.14 cm
25 1/8 "
63.82 cm
/32"
3
0.24 cm
3 3/8
"
8.57 cm
48 "
"
24 7/8
63.18 cm
/16"
7
1.11 cm
3 3/16"
8.10 cm
36 "
23 7/8 "
60.65 cm
the medium volume version.
1 1/16"
2.70 cm
"
18 "
"
2 7/16"
12 "
"
2 1/8"
6"
7.62 cm
4
7.46 cm
2 3/4
6.99 cm
5.72 cm
3
24 "
"
1 9/16
3.97 cm
2 1/4
3
"
3/16
"
10.16 cm
Designed by:
6.19 cm
5.40 cm
"
1 5/8
4.13 cm
Renny Yater
21 7/8
"
55.56 cm
(310) 225-6774 - USBlanks.com
20 3/16"
51.28 cm
18
"
45.72 cm
14 13/16"
37.62 cm
"
9 1/2
24.13 cm
82
9’8Xx"EPS
ROCKER
4 /16"
9
11.59 cm
THICKNESS
WIDTH
"
2 1/8 "
7 1/2
19.05 cm
5.40 cm
"
3 /16"
2 /16
6.19 cm
6"
8.73 cm
17 3/8
44.13 cm
2 9/16"
2 13/16"
12 "
20 3/4 "
"
3 1/8
7.94 cm
"
18 "
22 1/2
57.15 cm
"
3 3/8"
24 "
23 1/2
59.69 cm
7
6.51 cm
13
/16
4.60 cm
1
1 3/16
3.02 cm
7
7.14 cm
8.57 cm
"
SUPERFUSED
(64.14 cm)
52.71 cm
"
"
(274.96 cm)
(9.53 cm)
Available Rockers:
"
1
/2
1.27 cm
3 9/16"
9.05 cm
36 "
"
24 3/4
62.87 cm
/16"
1
0.16 cm
3 3/4"
9.53 cm
48 "
"
25 1/4
64.14 cm
3
3/4
"
9.53 cm
Center
1
"
25 /8
63.82 cm
/32"
3
0.24 cm
3 3/4 "
9.53 cm
48 "
24 7/8 "
63.18 cm
/16"
7
1.11 cm
"
3 9/16
9.05 cm
36 "
23 7/8 "
60.65 cm
the maximum volume version.
1
"
3 5/16
8.41 cm
"
24 "
21 /8
55.56 cm
"
3 1/8
7.94 cm
"
18 "
20 3/16"
"
2 13/16"
12 "
"
2 1/2"
1 /16
2.70 cm
1 9/16
3.97 cm
2 1/4
5.72 cm
3
7.62 cm
4
"
10.16 cm
Designed by:
7.14 cm
6.35 cm
2
5.08 cm
"
Renny Yater
6"
7
"
(310) 225-6774 - USBlanks.com
51.28 cm
18
"
45.72 cm
14 13/16"
37.62 cm
"
9 1/2
24.13 cm
83
EPS BLOCK
CUT BLANKS
Manufactured from White Hot Surfboard Foam Billets
Available in 1.5 lb. or 2.0 lb. Density
Size
Type-Shaper
Standard
Stringer
Length
Width
Nose
Tail
Rocker Rocker
Center
Thick.
Nose
Tail
Thick. Thick.
6’0”P
Short Board - Patterson
Ply
73.00
20.06
4.63
1.69
2.38
0.88
1.06
6’2”A
Fish - Rawson
Ply
74.25
23.50
4.75
1.81
3.15
1.35
1.45
6’3”RS Short Board - Rusty
Ply
75.00
21.00
4.87
2.00
2.62
1.25
1.37
63RSX Short Board - Rusty
Ply
75.00
21.00
4.87
2.00
2.90
1.50
1.65
6’3”WH Short Board - Rusty
Ply
75.75
20.60
5.60
1.73
2.75
1.40
1.50
6’3”WHX Short Board - Rusty
Ply
75.75
20.60
5.60
1.73
3.15
1.75
1.87
6’5”A
Fish - Rawson
Ply
77.25
23.50
5.25
1.81
3.35
1.13
1.38
6’8”WH Short Board - Rusty
Ply
79.00
21.75
5.25
2.34
2.88
1.15
1.25
6’8”WHX Short Board - Rusty
Ply
79.00
21.75
5.25
2.34
3.50
1.75
1.85
6’9”RS
Short Board - Rusty
Ply
81.00
22.00
5.81
2.40
2.87
1.75
1.25
69RSX Short Board - Rusty
Ply
81.00
22.00
5.81
2.40
3.18
1.50
1.50
6’10”A
Fish - Rawson
Ply
81.67
24.13
5.19
2.00
3.50
1.38
1.65
7’3”A
Fish - Rawson
1/8” Bass 87.04
24.11
5.50
2.13
3.63
1.38
1.50
7’5”A
Short Board - Rawson 1/8” Bass 87.96
22.06
6.13
2.19
3.00
0.88
1.38
8’1”EA
Short Board - Arakawa 1/8” Bass 96.05
24.14
6.44
2.57
3.44
1.00
1.32
9’2”A
Gun - Rawson
1/8” Bass 110.40
22.46
7.57
2.75
3.57
1.39
1.28
9’3”Y
Long Board - Yater
1/8” Bass 111.30
24.50
4.38
3.50
3.25
1.73
1.41
9’4”B
Long Board - Jones
1/8” Bass 111.44
24.50
4.88
3.63
3.25
0.90
1.32
9’8”Y
Long Board - Yater
1/8” Bass 116.40
24.50
4.50
3.69
3.63
1.45
1.55
9’9”A
Gun - Rawson
1/8” Bass 116.90
22.50
7.75
3.25
3.69
1.38
1.44
10’2”B
Long Board - Jones
1/8” Bass 122.22
24.50
4.82
3.82
3.73
1.27
1.58
9’6”A
SUP
1/8” Bass 114.00
32.00
5.25
4.25
4.93
2.25
1.25
10’0”
SUP
1/8” Bass 120.00
32.00
5.50
4.31
4.93
2.25
1.31
10’4”A
SUP
1/8” Bass 124.00
32.00
4.56
3.75
4.88
2.06
1.81
10’4”B
SUP
1/8” Bass 124.00
32.00
6.25
4.38
4.81
2.31
1.69
11’2”A
SUP
1/8” Bass 134.00
32.00
5.25
4.19
5.00
1.86
1.86
11’2”B
SUP
1/8” Bass 134.00
32.00
6.75
4.75
5.06
2.50
1.81
12’1”
SUP
1/8” Bass 145.00
32.00
6.13
3.38
5.19
2.56
2.50
12’6”A
SUP
1/8” Bass 150.00
32.00
6.31
3.50
5.50
2.86
2.75
310-225-6774 OR
www.usblanks.com
84
9'6"EPS
A-SUP
WIDTH
THICKNESS
"
5 1/4
13.35 cm
2 1/4
2 5/16"
3 1/2
5.87 cm
"
32 "
5.72 cm
81.28cm
"
8.89 cm
Maximum Width: 32"
12 "
(81.28 cm)
1 1/16"
4 1/4
10.80 cm
"
24 "
"
4 11/16"
36 "
2.70 cm
(12.54 cm)
Available Density: 1.5 PCF or 2.0 PCF
3
/8
0.95 cm
11.91 cm
Available Rockers:
4
"
7/8
12.38 cm
"
4 15/16
12.54 cm
48 "
Center
4 7/ 8
12.38 cm
"
48 "
1
/16
0.16 cm
"
4 5/8
11.75 cm
"
36 "
1 1/16"
4 1/16
10.32 cm
"
24 "
2 1 /16"
3 1/8
7.94 cm
"
12 "
"
1 1/4
3.18 cm
2.70 cm
5.24 cm
4 1/4
10.80 cm
"
Notes: Forthcoming
32 "
81.28 cm
(310) 225-6774 - USBlanks.com
32 "
81.28 cm
85
10'0"EPS
A-SUP
ROCKER
"
5 1/2
13.97 cm
2 5/8
6.67 cm
"
THICKNESS
WIDTH
"
2 1/4
32 "
5.72 cm
81.28 cm
3 7/16"
8.73 cm
12 "
Maximum Width: 32"
(81.28 cm)
1 1/4
"
3.18 cm
"
1
/2
1.27 cm
4 3/16
10.64 cm
24 "
"
36 "
"
(12.54 cm)
4 5/8
11.75 cm
Available Rockers:
"
1
/8
0.32 cm
"
4 13/16
12.22 cm
Notes: Forthcoming
"
Center
4 15/16
12.54 cm
"
4 3/ 4
12.07 cm
"
48 "
5
/8
1.59 cm
"
4 7/16
11.27 cm
"
36 "
1 7/16"
3 13/16
9.68 cm
"
24 "
2 9 /16"
2 7/8
7.30 cm
"
12 "
4 5/16"
1 5/16
3.33 cm
1
/8
0.32 cm
3.65 cm
6.51 cm
10.95 cm
"
48 "
32 "
81.28 cm
(310) 225-6774 - USBlanks.com
32 "
81.28 cm
86
10'4"EPS
A-SUP
THICKNESS
9
"
4 /16
11.59 cm
WIDTH
"
32 "
2 1/16
5.24 cm
81.28 cm
2 1/8
5.40 cm
"
"
3 3/8
8.57 cm
12 "
Maximum Width: 32"
"
15
/16
2.38 cm
"
24 "
4 1/8
10.48 cm
(81.28 cm)
(12.38 cm)
"
5
/16
0.79 cm
"
4 9/16
11.59 cm
36 "
"
4 3/4
12.07 cm
48 "
Available Rockers:
Notes: Forthcoming
"
4 7/8
12.38 cm
Center
"
4 5/ 8
11.75 cm
"
48 "
"
4 3/8
11.11 cm
"
36 "
"
3 15/16
10.00 cm
"
24 "
2 3 /16"
3 1/4
8.26 cm
"
12 "
"
1 13/16
4.60 cm
1
/4
0.64 cm
5
/8
1.59 cm
1 1/4
3.18 cm
5.56 cm
3 3/4
9.53 cm
"
32 "
81.28 cm
(310) 225-6774 - USBlanks.com
32 "
81.28 cm
87
10'4"EPS
B-SUP
ROCKER
1
"
6 /4
15.88 cm
THICKNESS
2
5/16
WIDTH
"
32 "
5.87 cm
81.28 cm
3 1/16
7.78 cm
"
"
3 5/16
8.41 cm
12 "
Maximum Width: 32"
1 1/2
"
3.81 cm
3 15/16
10.00 cm
"
24 "
(81.28 cm)
(12.22 cm)
"
5
/8
1.59 cm
"
4 7/16
11.27 cm
36 "
"
3
/16
0.48 cm
"
4 11/16
11.91 cm
48 "
Available Rockers:
4 13/16"
Center
12.22 cm
4 3/4
12.07 cm
"
48 "
"
4 1/2
11.43 cm
"
36 "
"
3 15/16
10.00 cm
"
24 "
"
12 "
11
/16
1.75 cm
1 1/2
3.81 cm
2 11/16"
6.83 cm
4 3/8
"
11.11 cm
3 1/8
7.94 cm
"
11/
16
4.29 cm
1
Notes: Forthcoming
81.28 cm
"
3
/16
0.48 cm
32 "
(310) 225-6774 - USBlanks.com
32 "
81.28 cm
88
11'2"EPS
A-SUP
ROCKER
"
5 1/4
13.34cm
THICKNESS
WIDTH
"
32 "
1 7/8
4.76 cm
81.28 cm
1
"
2 /2
6.35 cm
3
3/8
"
8.57 cm
12 "
Maximum Width: 32"
1 1/4
"
3.18 cm
4 3/16"
10.64 cm
24 "
(81.28 cm)
(12.7 cm)
Available Densities: 1.5 PCF or 2.0 PCF
9
"
/16
1.43 cm
4
5/8
"
11.75 cm
36 "
"
1
/8
0.32 cm
"
4 7/8
12.38 cm
48 "
Available Rockers:
Notes: Forthcoming
5"
Center
12.70 cm
"
4 13/16
12.22 cm
"
48 "
"
4 9/16
11.59 cm
"
36 "
1
/4
0.64 cm
5
/8
1.59 cm
1 1/4
2 1/4
(310) 225-6774 - USBlanks.com
"
4 1/8
10.48 cm
"
24 "
"
3 3/8
"
12 "
3.18 cm
5.72 cm
8.57 cm
4 3/16"
1 7/8 "
10.64 cm
4.76 cm
32 "
81.28 cm
32 "
81.28 cm
89
11'2"EPS
B-SUP
ROCKER
"
3
THICKNESS
WIDTH
"
6 /4
17.15 cm
2
1/2
6.35 cm
"
3
7/16
32 "
81.28 cm
7
3 /16
8.73 cm
"
8.73 cm
12 "
Maximum Width: 32"
1 7/8
"
4.76 cm
"
4 1/8
10.48 cm
24 "
(81.28 cm)
(12.86 cm)
7
"
/8
2.22 cm
4
9/16
"
11.59 cm
36 "
"
5
/16
0.79 cm
"
4 7/8
12.38 cm
48 "
Available Rockers:
Notes: Forthcoming
"
5 1/16
12.86 cm
"
4 15/16
12.54 cm
"
48 "
"
4 9/16
11.59 cm
"
36 "
5
/16
0.79 cm
7
/8
2.22 cm
1 3/4
"
4.45 cm
3"
6.83 cm
4 3/4
Center
"
12.07 cm
(310) 225-6774 - USBlanks.com
4 1/16
10.32 cm
"
24 "
"
12 "
3 1/4
8.26 cm
1 13/16"
4.60 cm
32 "
81.28 cm
32 "
81.28 cm
90
"
6 1/8
15.56 cm
"
3
3 /16
7.94 cm
32 "
"
2 9/16
6.51 cm
81.28 cm
12'1"EPS
SUP
3
5/8
9.21cm
"
12 "
1 3/4 "
4.29 cm
7
/8
"
2.22 cm
4 5/16 "
10.95 cm
24 "
Maximum Width: 32"
(81.28 cm)
4
3/4
"
12.07 cm
(13.18 cm)
36 "
"
5
/16
0.79 cm
5"
48 "
12.70 cm
Available Rockers:
Notes: Forthcoming
5
3/16
"
13.18 cm
"
1
/4
0.64 cm
5"
"
36 "
4 5/16
10.95 cm
"
24 "
"
12 "
"
4 3/4
12.07 cm
1 1/16"
1 7/8
"
3 5/8
"
2 1/2 "
4.76 cm
3 3/8
8.57 cm
32 "
81.28 cm
48 "
12.70 cm
9
/16
1.43 cm
2.70 cm
Center
9.21 cm
6.35 cm
(310) 225-6774 - USBlanks.com
32 "
81.28 cm
91
"
6 5/16
16.03 cm
2 7/8
7.30 cm
3 5/16"
3 15/16"
"
8.41 cm
32 "
81.28 cm
10.00cm
12'6"EPS
SUP
12 "
1 13/16"
4.60 cm
/16"
15
2.38 cm
4 5/8
"
11.75 cm
5 1/16"
12.86 cm
24 "
Maximum Width: 32"
(81.28 cm)
36 "
(13.97 cm)
"
3
/8
0.95 cm
"
5 3/8
13.65 cm
48 "
Available Rockers:
Notes: Forthcoming
"
Center
5 1/2
13.97 cm
"
5 3/8
13.65 cm
"
48 "
"
5 1/16
12.86 cm
"
36 "
1 3/16"
"
4 5/8
11.75 cm
24 "
3.02 cm
2"
3 15/16"
12 "
5
/16
0.79 cm
5
/8
1.59 cm
5.08 cm
3 1/2
"
8.89 cm
10.00 cm
2 3/4 "
6.96cm
32 "
81.28 cm
(310) 225-6774 - USBlanks.com
32 "
81.28 cm
92
PARABOLIC STRINGERS
The parabolic template outlines depicted on the following pages are drawn to scale and are
representative of the curvature positioning related to the given blank sizes. All templates
are named based on their overall length from end to end. When ordering please specify the
specific template to be used based on the finished board length. Any short board template
can be used in any blank as long as the template is smaller than the blank itself (this does
not apply to fish templates).
For example, you can request to use the 6’0” parabolic template in the 6’6” EA blank. As
a general rule the maximum length template that can be used in a blank will be one size
smaller than the blank itself (eg. 6’0” template in the 6’2” P or the 6’4” template in the 6’6” EA,
etc.) We will only use the same length template in a blank when specifically requested by a
customer. All templates can also be used in our SUPERFUSED EPS blanks.
Our “stock” parabolic templates can be adjusted in or out in the tail to accommodate a narrower or wider outline. Be aware that all dimensions from nose to tail will be affected when
making this adjustment. Upon request customers may also submit “custom” templates to
be kept as private outlines. Custom template set up will be subject to a one-time surcharge.
The most common stringer thicknesses in parabolic blanks are 3/32”, 1/8” and 4mm ply
(5/32”). The allowed maximum stringer thickness used for the 5’11” Fish and 6’4” Fish outlines is 3/32”.
We suggest using the natural rocker in all parabolic blanks whenever possible. Parabolic
stringers do not react to (or hold) rocker adjustments in the same manner as when adjusted
from a center stringer. For this reason will not guarantee precise tolerances when making
custom rocker adjustments in parabolic blanks.
93
5'9"P
PARABOLIC
Overall Template Length: 5' 8" (172.72 cm)
Blank Width: 19 1/16"
(48.42 cm)
( 1/2" narrower than standard 5’9P)
9"
Notes: This template is suitable for high perfor-
22.86 cm
mance shortboard shapes 5’8 and under.
* * All parabolic dimensions are “inside widths”
measured across from cut to cut. Extra width
must be added to the dimensions listed to account
13 1/4 "
for thickness of stringers. Overall blank width is
33.66 cm
narrower due to the thickness of material removed
during the cutting process.
"
14 5/8
37.15 cm
5’8”
172.72 cm
Available Rockers:
5’9P Parabolic Natural Rocker - 5’8 template
14 1/4 "
36.20 cm
(310) 225-6774 - USBlanks.com
11 3/8 "
28.90 cm
4"
10.16 cm
310-225-6774
USBlanks.com
94
6'0"P
PARABOLIC
Blank Width: 19 9/16" (49.69 cm)
( 1/2" narrower than standard 6’0P )
"
9 5/8
24.45 cm
Notes: This template is suitable for high performance short board shapes 5’10” and under.
14 1/2 "
36.83 cm
15 5/8 "
39.69 cm
5’10”
177.8 cm
Available Rockers:
15 3/8 "
39.05 cm
(310) 225-6774 - USBlanks.com
12 1/4 "
31.12 cm
4 1/4"
10.80 cm
310-225-6774
USBlanks.com
95
6'2"A
PARABOLIC
Blank Width: 23 1/8" (58.74 cm)
9 3/8"
23.81 cm
( 1/2" narrower than standard 6’2A )
13 3/8"
Notes: This template is suitable for high perfor-
33.97 cm
mance FISH board shapes 5’11” and under.
Maximum stringer thickess allowed = 3/32”
"
16 9/16
42.07 cm
16 15/16"
43.02 cm
5’11”
180.34 cm
Available Rockers:
6’2A Parabolic Natural Rocker - 5’11 FISH template
15 3/4"
40.01 cm
(310) 225-6774 - USBlanks.com
12 9/16"
31.91 cm
9 13/16"
24.92 cm
"
5 1/4
13.34 cm
310-225-6774
USBlanks.com
96
6'2"P
PARABOLIC
Blank Width: 20 1/8" (51.12 cm)
9 3/4
"
24.77 cm
"
14 3/8
36.51 cm
15 7/8
"
40.32 cm
6’0”
182.88 cm
Available Rockers:
6’2P Parabolic +1/2”N18” Rocker - 6’0 template
"
15 3/8
39.05 cm
(310) 225-6774 - USBlanks.com
"
12 1/4
31.12 cm
4 5/8"
11.75cm
310-225-6774
USBlanks.com
97
6'3"EA
PARABOLIC
Blank Width: 20 5/16" (51.59 cm)
( 1/2" narrower than standard 6’3 EA )
"
9 3/8
23.81 cm
13 7/8
"
35.24 cm
15 7/8
"
40.32cm
6’2”
187.96 cm
Available Rockers:
6’3EA Parabolic Natural Rocker - 6’2 template
15 1/4
"
38.74 cm
(310) 225-6774 - USBlanks.com
12 1/8
"
30.80 cm
4 9/16"
11.56 cm
310-225-6774
USBlanks.com
98
6'5"A
PARABOLIC
8 1/16"
Blank Width: 23 1/8" (58.74 cm)
20.48 cm
( 1/2" narrower than standard 6’5A )
12 "
30.48 cm
Notes: This template is suitable for high performance FISH board shapes 6’4” and under.
Maximum stringer thickness allowed = 3/32”
16"
40.64 cm
17 /16"
5
43.97 cm
6’4”
193.04 cm
Available Rockers:
6’5A Parabolic Natural Rocker - 6’4 Fish template
16"
40.64 cm
(310) 225-6774 - USBlanks.com
12 3/4
"
32.39 cm
10 3/16"
25.88 cm
6 11/16"
16.99 cm
310-225-6774
USBlanks.com
99
6'6"EA
PARABOLIC
Blank Width: 20 15/16" (53.18 cm)
( 1/2" narrower than standard 6’6EA )
9"
22.86 cm
13 7/16"
34.13 cm
15 11/16"
39.85 cm
6’4”
193.04 cm
Available Rockers:
15 "
38.10 cm
(310) 225-6774 - USBlanks.com
11 3/8
"
28.89 cm
"
4 3/8
11.11 cm
310-225-6774
USBlanks.com
100
6'7"P
PARABOLIC
Blank Width: 21" (53.34 cm)
"
8 3/4
22.22 cm
13 /16"
5
33.81 cm
15 7/8 "
40.32 cm
6’6”
198.12 cm
Available Rockers:
6’7P Parabolic +1/4”T20” Rocker - 6’4 template
15 3/16"
38.58 cm
(310) 225-6774 - USBlanks.com
12"
30.48 cm
4 1/8
"
10.48 cm
310-225-6774
USBlanks.com
101
6'9"EA
PARABOLIC
Blank Width: 20 13/16" (49.69 cm)
8 15/16"
22.70 cm
13 9/16"
34.45 cm
16 1/8 "
40.96 cm
6’8”
203.20 cm
Available Rockers:
14 13/16"
37.63 cm
(310) 225-6774 - USBlanks.com
10 15/16"
27.78 cm
3 1/4"
8.26 cm
310-225-6774
USBlanks.com
102
7'1"EA
PARABOLIC
Overall Template Length: 7’ 0" (213.36 cm)
Blank Width: 22 3/16" (57.63 cm)
8 3/4"
22.23 cm
13 1/2"
34.29 cm
15 3/4 "
40.01 cm
16 3/16"
41.12 cm
7’0”
213.36 cm
Available Rockers:
16 3/16"
41.12 cm
14 3/4"
37.47 cm
(310) 225-6774 - USBlanks.com
11 1/4"
28.58 cm
4 3/4"
12.07 cm
310-225-6774
USBlanks.com
103
9'4"B
Outline “A”
Outline “B”
15.24 cm
20.32 cm
6"
8"
PARABOLIC
Blank Width: 24 11/16" (62.71 cm)
"
14 1/4
36.20 cm
16 "
( 1/2" narrower than standard 9’4B )
40.64 cm
Notes: This template is suitable for long board
shapes 9’4” and under.
This outline can be used on the following
blanks:
93Y, 94B, 95M, 98Y and 98EPS
19"
48.26 cm
20 "
50.80 cm
Available Rockers:
94B Natural Rocker
(310) 225-6774 - USBlanks.com
11 1/4
28.58 cm
"
11 1/2
29.21 cm
4 1/2"
4 1/2"
11.43 cm
11.43 cm
310-225-6774
"
USBlanks.com
104
MULTI BOARD BOXES WITH BOX ENDS
INSIDE DIMENSIONS
BOX SIZE:LENGTH
WIDTH
HEIGHT
1. 7’4”
7’2” (2.24 m)
25” (63.5 cm)
12” (30.5 cm)
2. 8'4"
8'2" (2.49 m)
25" (63.5 cm)
12" (30.5 cm)
3. 10'8"
10'6" (3.32 m)
26" (76.2 cm)
14" (35.5 cm)
4. 12'5"
12'3" (3.73 m)
33" (83.8 cm)
12.5" (31.6 cm)
BOXES ARE A GLUED TUBE MADE OF 275# KRAFT
ENDS STAPLE IN FOR A STRUCTUAL FIT.
BOXES ARE PLAIN WITH NO LOGO.
105

the US Blanks catalog - Foam E-Z

Transcription

Similar documents

Surfboard Blank Catalog

Have a question? Need more catalogs? Place an order? Contact us