Televizor_JVC_LT-32A..

Transcription

LT-42A80SU
LT-37A80SU
LT-32A80SU
LT-26A80SU
LT-42A80ZU
LT-37A80ZU
LT-32A80ZU
LT-26A80ZU
WIDE LCD PANEL TV
16:9 LCD TV
TELEVISEUR A ECRAN LCD PANORAMIQUE
BREEDBEELD LCD TV
TELEVISOR CON PANEL LCD PANORÁMICO
TV LCD WIDESCREEN
TELEVISOR COM ECRÃ PANORÂMICO DE
CRISTAL LÍQUIDO
© 2007 Victor Company of Japan, Limited
LCT2208-002A-U_Cover.indd 1-2
0207KTH-CR-MU
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
CASTELLANO
ITALIANO
PORTUGUÊS
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
MANUAL DE INSTRUCCIONES
ISTRUZIONI
INSTRUÇÕES
LCT2208-002A-U-EN
2/5/2007 2:55:15 PM
ENGLISH
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic
compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technology Centre Europe GmbH
Postfach 10 05 52
61145 Friedberg
Germany
DEUTSCH
Sehr geehrter Kunde, sehr geehrte Kundin,
dieses Gerät stimmt mit den gültigen europäischen Richtlinien und Normen bezüglich elektromagnetischer
Verträglichkeit und elektrischer Sicherheit überein.
Die europäische Vertretung für die Victor Company of Japan, Limited ist:
Postfach 10 05 52
61145 Friedberg
Deutschland
FRANÇAIS
Cher(e) client(e),
Cet appareil est conforme aux directives et normes européennes en vigueur concernant la compatibilité
électromagnétique et à la sécurité électrique.
Représentant européen de la société Victor Company of Japan, Limited:
Postfach 10 05 52
61145 Friedberg
Allemagne
NEDERLANDS
Geachte klant,
Dit apparaat voldoet aan de geldende Europese normen en richtlijnen inzake elektromagnetische compatibiliteit en
elektrische veiligheid.
De Europese vertegenwoordiger van Victor Company of Japan, Limited is:
Postfach 10 05 52
61145 Friedberg
Duitsland
CASTELLANO
Apreciado cliente,
Este aparato cumple con las normativas y normas europeas respecto a la seguridad eléctrica y a la compatibilidad
electromagnética.
El representante europeo de Victor Company of Japan, Limited es:
Postfach 10 05 52
61145 Friedberg
Alemania
ITALIANO
Gentile Cliente,
Questa apparecchiatura è conforme alle direttive e alle norme europee relative alla compatibilità elettromagnetica e
alla sicurezza elettrica.
Il rappresentante europeo della Victor Company of Japan, Limited è:
Postfach 10 05 52
61145 Friedberg
Germania
PORTUGUÊS
Caro Cliente,
Este aparelho encontra-se em conformidade com as directivas Europeias válidas e padrões referentes à
compatibilidade magnética e segurança eléctrica.
O representante europeu da Victor Company of Japan, Limited é:
Postfach 10 05 52
61145 Friedberg
Alemanha
i
Intro_WEEE.indd i-Sec1:i
2/1/2007 2:46:01 PM
Information for Users on Disposal of Old Equipment
ENGLISH
Informations relatives à l’élimination des appareils usagés,
à l’intention des utilisateurs
FRANÇAIS
[European Union]
[Union européenne]
This symbol indicates that the electrical and electronic equipment should not be disposed as
general household waste at its end-of-life. Instead, the product should be handed over to the
applicable collection point for the recycling of electrical and electronic equipment for proper
treatment, recovery and recycling in accordance with your national legislation.
Lorsque ce symbole figure sur un appareil électrique et électronique, cela signifie qu’il ne
doit pas être éliminé en tant que déchet ménager à la fin de son cycle de vie. Le produit
doit être porté au point de pré-collecte approprié au recyclage des appareils électriques et
électroniques pour y subir un traitement, une récupération et un recyclage, conformément à
la législation nationale.
By disposing of this product correctly, you will help to conserve natural resources and will
help prevent potential negative effects on the environment and human health which could
otherwise be caused by inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your local municipal
office, your household waste disposal service or the shop where you purchased the product.
En éliminant correctement ce produit, vous contriburez à la conservation des ressources
naturelles et à la prévention des éventuels effets négatifs sur l’environnement et la santé
humaine, pouvant être dus à la manipulation inappropriée des déchets de ce produit. Pour
plus d’informations sur le point de pré-collecte et le recyclage de ce produit, contactez votre
mairie, le service d’évacuation des ordures ménagères ou le magasin dans lequel vous avez
acheté le produit.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
Attention:
(Business users)
Attention:
Des amendes peuvent être infligées en cas d’élimination incorrecte de ce produit,
conformément à la législation nationale.
This symbol is only
valid in the European
Union.
If you wish to dispose of this product, please visit our web page www.jvc-europe.com to
obtain information about the take-back of the product.
Ce symbole n’est
reconnu que dans
l’Union européenne.
(Utilisateurs professionnels)
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national
legislation or other rules in your country for the treatment of old electrical and electronic
equipment.
Benutzerinformationen zur Entsorgung alter Geräte
Hinweis:
Dieses Symbol ist nur
in der Europäischen
Union gültig.
DEUTSCH
Si vous souhaitez éliminer ce produit, visitez notre page Web www.jvc-europe.com afin
d’obtenir des informations sur sa récupération.
[Pays ne faisant pas partie de l’Union européenne]
Si vous souhaitez éliminer ce produit, faites-le conformément à la législation nationale ou
autres règles en vigueur dans votre pays pour le traitement des appareils électriques et
électroniques usagés.
Informatie voor gebruikers over het weggooien van oude
apparatuur
NEDERLANDS
[Europäische Union]
[Europese Unie]
Dieses Symbol zeigt an, dass das elektrische bzw. elektronische Gerät nicht als normaler
Haushaltsabfall entsorgt werden soll. Stattdessen sollte das Produkt zur fachgerechten
Entsorgung, Weiterverwendung und Wiederverwertung in Übereinstimmung mit der
Landesgesetzgebung einer entsprechenden Sammelstelle für das Recycling elektrischer
und elektronischer Geräte zugeführt werden.
Deze markering geeft aan dat de elektrische en elektronische apparatuur bij het einde van
de gebruiksduur niet bij het huishoudelijk afval mag worden gegooid. Het product moet in
plaats daarvan worden ingeleverd bij het relevante inzamelingspunt voor hergebruik van
elektrische en elektronische apparatuur, voor juiste verwerking, terugwinning en hergebruik
in overeenstemming met uw nationale wetgeving.
Die korrekte Entsorgung dieses Produkts dient dem Umweltschutz und verhindert mögliche
Schäden für die Umwelt und die menschliche Gesundheit, welche durch unsachgemäße
Behandlung des Produkts auftreten können. Weitere Informationen zu Sammelstellen und
dem Recycling dieses Produkts erhalten Sie bei Ihrer Gemeindeverwaltung, Ihrem örtlichen
Entsorgungsunternehmen oder in dem Geschäft, in dem Sie das Produkt gekauft haben.
Door dit product naar het inzamelingspunt te brengen, werkt u mee aan het behoud van
natuurlijke hulpbronnen en met het voorkomen van potentiële negatieve effecten op het
milieu en de volksgezondheid, die anders veroorzaakt zouden kunnen worden door onjuiste
afvalverwerking van dit product. Neem voor meer informatie over inzamelingspunten
en hergebruik van dit product contact op met de gemeente in uw woonplaats, het
afvalverwerkingsbedrijf of de winkel waar u het product hebt aangeschaft.
Für die nicht fachgerechte Entsorgung dieses Abfalls können gemäß der
Landesgesetzgebung Strafen ausgesprochen werden.
(Geschäftskunden)
Wenn Sie dieses Produkt entsorgen möchten, besuchen Sie bitte unsere Webseite www.
jvc-europe.com, um Informationen zur Rücknahme des Produkts zu erhalten.
Let op:
Er kunnen boetes gelden voor een onjuiste verwijdering van dit afval, in overeenstemming
met de nationale wetgeving.
Dit symbool is alleen
geldig in de Europese
Unie.
(Zakelijke gebruikers)
Bezoek als u dit product wilt weggooien onze website www.jvc-europe.com voor informatie
over het terugnemen van het product.
[Andere Länder außerhalb der Europäischen Union]
Wenn Sie dieses Produkt entsorgen möchten, halten Sie sich dabei bitte an die
entsprechenden Landesgesetze und andere Regelungen in Ihrem Land zur Behandlung
elektrischer und elektronischer Geräte.
ii
Intro_WEEE.indd Sec1:ii-Sec1:iii
[Landen buiten de Europese Unie]
Wanneer u dit product wilt verwijderen, houdt u dan aan de geldende nationale wetgeving
of andere regels in uw land voor de verwerking van oude elektrische en elektronische
apparatuur.
iii
2/1/2007 2:46:01 PM
Información para los usuarios sobre la eliminación de
equipos usados
Atención:
Este símbolo sólo es
válido en la Unión
Europea.
CASTELLANO
Informações para os Utilizadores sobre a Eliminação de
Equipamento Antigo
PORTUGUÊS
[Unión Europea]
[União Europeia]
Este símbolo indica que los aparatos eléctricos y electrónicos no deben desecharse junto
con la basura doméstica al final de su vida útil. El producto deberá llevarse al punto de
recogida correspondiente para el reciclaje y el tratamiento adecuado de equipos eléctricos y
electrónicos de conformidad con la legislación nacional.
Este símbolo indica que o equipamento eléctrico e electrónico não deve ser eliminado como
um resíduo doméstico geral, no fim da respectiva vida útil. Pelo contrário, o produto deve
ser entregue num ponto de recolha apropriado, para efectuar a reciclagem de equipamento
eléctrico e electrónico e aplicar o tratamento, recuperação e reciclagem adequados, de
acordo com a respectiva legislação nacional.
Si desecha el producto correctamente, estará contribuyendo a conservar los recursos
naturales y a prevenir los posibles efectos negativos en el medio ambiente y en la salud
de las personas que podría causar el tratamiento inadecuado del producto desechado.
Para obtener más información sobre el punto de recogida y el reciclaje de este producto,
póngase en contacto con su oficina municipal, su servicio de recogida de basura doméstica
o la tienda en la que haya adquirido el producto.
Ao eliminar este produto da forma correcta, ajudará a conservar recursos naturais e ajudará
a evitar potenciais efeitos negativos no ambiente e saúde humana, que poderiam ser
causados pelo tratamento residual inadequado deste produto. Para mais informações sobre
o ponto de recolha e reciclagem deste produto, contacte a respectiva entidade local, o
serviço de eliminação de resíduos ou a loja onde adquiriu o produto.
De acuerdo con la legislación nacional, podrían aplicarse multas por la eliminación
incorrecta de estos desechos.
Caso estes resíduos não sejam correctamente eliminados, poderão ser aplicadas
penalizações, em conformidade com a respectiva legislação nacional.
(Empresas)
Si desea desechar este producto, visite nuestra página Web www.jvc-europe.com para
obtener información acerca de la retirada del producto.
Atenção:
Este símbolo apenas
é válido na União
Europeia.
(utilizadores profissionais)
Se pretender eliminar este produto, visite a nossa página da web em www.jvc-europe.com
para obter informações sobre a devolução do produto.
[Otros países no pertenecientes a la Unión Europea]
[Outros países fora da União Europeia]
Si desea desechar este producto, hágalo de conformidad con la legislación nacional vigente
u otras normativas de su país para el tratamiento de equipos eléctricos y electrónicos
usados.
Se pretender eliminar este produto, faça-o de acordo com a legislação nacional aplicável ou
outras regras no seu país para o tratamento de equipamento eléctrico e electrónico velho.
Informazioni per gli utenti sullo smaltimento delle
apparecchiature obsolete
ITALIANO
[Unione Europea]
Questo simbolo indica che l’apparecchiatura elettrica ed elettronica a cui è relativo non
deve essere smaltita tra i rifiuti domestici generici alla fine della sua vita utile. Il prodotto,
invece, va consegnato a un punto di raccolta appropriato per il riciclaggio di apparecchiature
elettriche ed elettroniche, per il trattamento, il recupero e il riciclaggio corretti, in conformità
alle proprie normative nazionali.
Mediante lo smaltimento corretto di questo prodotto, si contribuirà a preservare le risorse
naturali e a prevenire potenziali effetti negativi sull’ambiente e sulla salute umana che
potrebbero essere provocati, altrimenti, da uno smaltimento inappropriato del prodotto.
Per ulteriori informazioni sul punto di raccolta e il riciclaggio di questo prodotto, contattare
la sede comunale locale, il servizio di smaltimento rifiuti domestici o il negozio in cui si è
acquistato il prodotto.
Attenzione:
L’utente è responsabile del conferimento dell’apparecchio a fina vita alle appropriate
strutture di raccolta, pena le sanzioni previste dalla vigente legislazione sui rifiuti.
Questo simbolo è
valido solo nell’Unione
Europea.
(Per gli utenti aziendali)
Qualora si desideri smaltire questo prodotto, visitare la nostra pagina web www.jvc-europe.
com per ottenere informazioni sul ritiro del prodotto.
[Per altre nazioni al di fuori dell’Unione Europea]
Qualora si desideri smaltire questo prodotto, effettuare lo smaltimento in conformità alla
normativa nazionale applicabile o alle altre leggi della propria nazione relative al trattamento
delle apparecchiature elettriche ed elettroniche obsolete.
iv
Intro_WEEE.indd Sec1:iv-Sec1:v
v
2/1/2007 2:46:01 PM
Expanding the world of
beautiful images
First things first!
 Warning ············································ 3
Digital camera
Video camera
Game console
DVD player
DVD recorder
Getting started
 Names of all the parts ······················ 5
 Basic connections ···························· 7
 Initial settings ··································· 9
 Editing channels ····························· 11
· Registering channels
PREPARE
VCR
IMPORTANT!
VHF/UHF
ENGLISH
Enjoy rich multi-media with JVC
Contents
 Connecting external devices ·········· 13
Let’s try it out
 Enjoying your new TV! ··················· 15
· TV / Teletext / Video / etc.
USE
 Watching TV··································· 17
 Viewing teletext ······························ 19
 Watching videos / DVDs ················ 21
Try the advanced features
 Useful functions······························ 23
· Set a time for the TV to turn itself off
· Stop children from watching specific channels
 Customising your TV ······················ 25
 Advanced picture adjustment ········· 27
· Reduce noise / Watch a more natural picture
 Troubleshooting ····························· 29
 Technical information ····················· 32
 “CH/CC” List ··································· 33
 Specifications ································· 34
1
1-2
TROUBLE?
When you have trouble
SETTINGS
Just the way you like it
2
2/19/2007 9:34:07 AM
First things
first!
Warning
Please follow all the guidelines below
On disposal of the
TV!
Never place anything on
the TV!
 Connect only to a 220-240V, 50Hz AC
outlet.
 Do not rest your elbows on, or allow
children to hang from the TV.
There is a risk that the TV will fall and
cause injuries.
 Follow the instruction in
“Information for Users on
Disposal of Old Equipment”
(P. ii to v).
 Placing liquids, naked
flames, cloths, paper,
etc. on the TV may
cause a fire.
Make enough room for
inserting and removing
the power plug!
Never try to repair
the TV yourself!
 If the problem cannot be solved in
“Troubleshooting” (P. 29), unplug
the power cord and contact your
retailer.
 The main power supply for this TV is
controlled by inserting or removing the
power plug.
If the TV is damaged
or behaving strangely,
stop using it at once!
 Unplug the power cord and contact
your retailer.
Never cut or damage
the power cord!
 It may damage your hearing.
3-4
 It may cause an electric shock.
Never obstruct the
ventilation holes!
 It may cause overheating or a fire.
Handle LCD panel
with care!
 Use a soft, dry cloth when cleaning.
Hold the TV so as not to
scratch the screen!
 Do not touch the screen when carrying the
TV.
Do not carry the
TV on your own!
 In order to prevent accidents,
ensure that the TV is carried
by two or more people.
TROUBLE?
 Consult a qualified technician.
 See the included manual on mounting
procedures.
 JVC assumes no responsibility for
damage due to improper mounting.
Never dismantle the
rear panel!
SETTINGS
When attaching the TV to
the wall, use the optional
JVC wall mounting unit!
 For more details on installation, usage and safety  Consult your retailer
3
 It may cause a fatal
electric shock. Take care
when children are near.
USE
 The power buttons on
the remote control and
the TV unit cannot
completely turn off the
TV. (Make appropriate
arrangements for
bedridden people.)
Never insert objects into
the cabinet openings!
Never listen to
headphones at high
volume!
 If the power plug is not the
right shape, or the power
cord is not long enough,
use an appropriate plug
adapter or extension cable.
(Consult your retailer.)
Unplug the power cord
when going out!
 To prevent fire or electric
shock, never allow
liquids to enter the unit.
PREPARE
Place the TV as
close to the outlet as
possible!
Never expose to rain or
moisture!
IMPORTANT!
Do not allow the TV
to fall!
ENGLISH
Follow this manual
regarding setup!
4
2/19/2007 9:34:10 AM
Getting
started
Names of all the parts
Volume
 When watching TV / Video
Change the aspect ratio (P. 17)
Power On / Off
ON: Lit (Green)
OFF: Unlit
To headphones (P. 13)
3
4
5
6
7
8
9
0
Turn on “3D CINEMA SOUND” (P. 17)
 When viewing teletext (P. 19)
Remote control sensor
Power lamp
2
Channel information
(P. 17)
Change the channel / page
IMPORTANT!
Change channel
/ volume (P. 17)
1
ENGLISH
Turn On / Off (Standby)
Mute
Watch video, etc. (P. 21)
AV
ZOOM
To teletext (P. 19)
MENU
P
OK
TV
Display on-screen menu / set
Volume
P
Check accessories
Insert the batteries
Use two “AA/R6” dry cell batteries. Insert the batteries from the - end, making
sure the + and - polarities are correct.
Remote control
(RM-C1508)
PREPARE
(P. 25)
VCR
DVD
Switch between
“VCR / g / DVD”
(P. 21)
USE
“AA/R6” Batteries
For confirming
the TV works
 When using TV’s menu
Return to TV
Display
on-screen
menu / set
 When watching TV (P. 17)
5
5-6
Switch briefly
between teletext and TV
View sub-pages
To index page
 When operating a JVC VCR
or DVD (P. 21)
TROUBLE?
Select settings in
menus
SETTINGS
Hold the current page
Bookmark pages
Reveal hidden pages
Enlarge the text
To previous screen
6
2/19/2007 9:34:13 AM
Basic connections
Connect the aerial
ENGLISH
Please read the user manuals of each device carefully before setup.
It is necessary to connect an aerial to watch TV.
 Connect with other devices  “Connecting external devices” (P. 13)
Connect a VCR / DVD recorder
AERIAL
IMPORTANT!
AERIAL
EXT-1
PREPARE
EXT-2
USE
 After all the connections have been made, insert the plug into an AC outlet.
 Power requirements
 Connect the power cord only to a 220-240V, 50Hz
AC outlet.
 Installation requirements
 To avoid overheating, ensure the unit has ample
room.
 When attaching the TV to the wall, use the
optional JVC wall mounting unit
7
7-8
200mm
 Connect “T-V LINK” compatible recording device to “EXT-2”.
 “T-V LINK”  “What is “T-V LINK”?” (P. 9)
150mm 50mm
150mm
50mm
TROUBLE?
 See the included manual on mounting procedures.
 JVC assumes no responsibility for damage due to
improper mounting.
 200mm × 200mm mount which conforms to VESA
standards.
VCR / DVD recorder
SETTINGS
Care when setting
8
2/19/2007 9:34:14 AM
Initial settings
1
Begin
IMPORTANT!
2
ENGLISH
Set the menu language, installation location and automatically register the TV channels.
These channels can be edited later in “Editing channels” (P. 11).
(Channel data on the TV can be sent to a connected recording device that is compatible with “T-V LINK”.)
 Shown only when
powering on for the first time.
 The power on the unit can also be used.
Select a language
1 select
LANGUAGE
PREPARE
2 next
3
 To the previous screen 
select
COUNTRY
 For the next page 
BACK
P
TV
Select the country of installation
TV
MENU
OK
 Exit 
MENU
Automatically register channels
(Blue)
AUTO PROGRAM
CH 02
0%
 If the “JVC” logo does not appear or
if you wish to make changes later
 “LANGUAGE” and “AUTO PROGRAM”
(P. 26)
P
5
Check what was registered
6
Finish
Connecting the TV to a “T-V LINK”
compatible device allows :
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
BBC1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
 Edit channels
 When using “T-V LINK”
T-V LINK
DOWNLOAD TV
9
9-10
 If “FEATURE NOT
AVAILABLE” appears :
 Is the “T-V LINK” compatible
device connected to “EXT-2”?
 Is the device turned on?
TROUBLE?
“T-V LINK” (JVC) “Q-LINK” (Panasonic)
“Megalogic” (Grundig) “Data Logic” (Metz)
“SMARTLINK” (Sony) “Easy Link” (Philips)
 When not using “T-V LINK”
RECORDING DEVICE
 “Technical information” (P. 32)
 “T-V LINK” variations
 Confirm
 ⁄ in “Editing channels”
(P. 11)
SETTINGS
What is “T-V LINK”?
 Channels on the TV to be instantly
registered on the device.
 The “DIRECT REC” function to be
used.
USE
4
(Yellow)
10
2/19/2007 9:34:18 AM
Editing channels
Edit the channels registered with “AUTO PROGRAM” in “Initial settings” (P. 9).
2
Select “SET UP”
MOVE
ZOOM
P
TV
move out
OK
2 next
Edit a
channel
name
 To the previous
screen
 Exit

5
6
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
HDMI SETTING
02
03
04
05
06
01
02
03
04
EDIT
ID
_____
BBC1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
select
02
03
04
05
06
01
02
03
04
move in
 When selecting a preset name from the “ID LIST”
enter
(Blue)
the first
character
1 select
EDIT
ID
_____
BBC1
PR
AV
01
02
03
04
05
06
07
08
09
M
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
ID LIST
M6
MBC
MCM
MDR
MOVIE
MTV
MTV3
2 set
 When manually naming a channel
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
next
column
1 Begin
Select a row
02
03
05
06
04
01
02
03
04
2 Select a “CH/CC”
Insert a
channel
PR
AV
01
02
03
04
05
06
07
08
09
INSERT
ID
_____
BBC1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
1 enter
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
JVC
02
03
04
05
06
01
02
03
04
2 next
column
3 set
3 Enter a number
select
EDIT
ID
_____
BBC1
02
03
04
05
06
01
-02
03
 Receives the
broadcast signal.
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
BBC1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
12
02
03
 “CH/CC” List  (P. 33)
Edit
Delete a
channel
Confirm settings
1 Delete
(Yellow)
DELETE
Finish
T-V LINK
DOWNLOAD TV
1 Begin
 When using
“T-V LINK”
(Blue)
RECORDING DEVICE
· Registering channels
Register a
new channel
MANUAL
3 Set
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
CH/CC
CH
CH
CH
CH
CC
CC
CC
CC
CC
03
04
05
06
01
02
03
04
05
2 Beginning channel search
MANUAL
PR
10
11
12
13
14
15
16
17
18
19
ID
From high From low
frequencies frequencies
CH/CC
CC 05
CH 02 (B/G)
_____
_____
_____
_____
_____
_____
_____
_____
or
 If necessary, press 3
to change the broadcasting system.
 “Receivable broadcast systems”
(P. 32)
EDIT
PR
10
11
12
13
14
15
16
17
18
19
ID
_____
_____
_____
_____
_____
_____
_____
_____
CH/CC
CC 05
CH 08
MANUAL
PR
10
11
12
13
14
15
16
17
18
19
ID
CH/CC
CC 05
CH 03 (B/G)
_____
_____
_____
_____
_____
_____
_____
_____
 Adjust
MANUAL
PR
10
11
12
13
14
15
16
17
18
19
ID
 Auto-search begins,
and the nearest
frequency is imported.
 Repeat the previous
steps until the
desired channel is
displayed.
CH/CC
CC 05
CH 08 (D/K)
_____
_____
_____
_____
_____
_____
_____
_____
 Picture fine tuning 
(Yellow) (Blue)
/
 Sound fine tuning 
select a system
TROUBLE?
11-12
CH
CH
CH
CH
CH
CC
CC
CC
CC
ON
 When not using
 Is the “T-V LINK”
compatible device
“T-V LINK”
connected to “EXT-2”?
 “T-V LINK”  (P. 9)
11
A
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
SETTINGS
7
ID
_____
BBC1
CH/CC
USE

05
06
01
02
03
04
1 select
SET UP
PR
AV
01
02
03
04
05
06
07
08
09
CH
CH
CC
CC
CC
CC
04
ID
Select “EDIT / MANUAL”
2 next
4
CH
ID
_____
BBC1
PR
AV
01
02
03
04
05
06
07
08
09
02
03
PREPARE
3
CH
CH
EDIT
select
CH/CC
2 Enter a channel name
PR
AV
01
02
03
04
05
06
07
08
09
1 select
MENU
P
ID
_____
BBC1
PR
AV
01
02
03
04
05
06
07
08
09
EDIT
PICTURE
SOUND
FEATURES
SET UP
3 Finish
EDIT
1 Begin
MENU
2 Select a destination
IMPORTANT!
1
Display the menu
1 Begin
ENGLISH
When coming from “Initial settings” (P. 9), skip to ⁄.
Move a
channel’s
position
12
2/19/2007 9:34:25 AM
Connecting external devices
VCR / DVD / other devices
 Connect “DVI” devices  (P. 32)
ENGLISH
You can connect many different devices to the rear panel of the TV.
Please read the user manuals of each device before setting up.
(Connecting cables are not supplied with this TV.)
: signal direction
 “T-V LINK”  (P. 9)
EXT-1 Watching videos
Output 
Input 
· Composite signal · Composite signal /
· Sound L / R
RGB
· Sound L / R
(HDMI compatible)
EXT-4
Satellite broadcast /
Digital broadcast tuner
EXT-5
(HDMI 1)
(HDMI 2)
Satellite broadcast / Digital
broadcast tuner
videos
EXT-2 Dubbing
Using “T-V LINK”
(HDMI compatible)
EXT-1
· T-V LINK
EXT-2
 Use S-VIDEO  “S-IN” (P. 22)
 Select dubbing sources
 “DUBBING” (P. 22)
 Connect a decoder
 “DECODER (EXT-2)” (P. 26)
VCR / DVD recorder
(T-V LINK)
(“T-V LINK” compatible)
EXT-3
PREPARE
Output 
Input 
· Sound L / R
RGB / S-VIDEO
· Sound L / R
IMPORTANT!
DVD player
Headphone
Headphone
AERIAL
 Switch input signal  “
(Component signal)
Pr/Pb/Y,
V” (P.22)
EXT-3 Watching DVDs
Output 
(Composite signal)
(For service adjustments)
 Switch input signal
“
Pr/Pb/Y,
V” (P. 22)
Game consoles
13
13-14
Video camera
 “HDMI SETTING”  (P. 26)
 EXT-5 input does not support
analogue sound.
TROUBLE?
DVD player
Input 
· HDMI signal
(P. 34)
SETTINGS
EXT-4 Connecting
EXT-5 HDMI devices
Output 
USE
Not available.
Input 
· Composite signal
/ Component
signal (P. 34)
· Sound L / R
14
2/19/2007 9:34:27 AM
Let’s try it out
Enjoying your new TV!
ENGLISH
21
Watching TV
 View channel information
 Change the aspect ratio
 Enjoy 3D cinema sound
Watching
videos / DVDs
IMPORTANT!
17
PAGE
PAGE
 Watch high quality video (S-VIDEO)
 Name connected devices
 Dub videos
6
5
4
9
8
7
0
Personal preferences
25
PREPARE
2
1
PAGE
3
 Adjust the picture
 Adjust the sound
USE
MENU
TV mode
Text mode
 Enlarge the text
 To the index page
 Hold the current page
 Switch briefly between teletext and TV
 Bookmark your favourite pages
 Advanced settings
(sleep-timer / child lock, etc.)
 Basic settings
(channel settings, etc.)
SETTINGS
19
PAGE
Viewing teletext
PICTURE
SOUND
FEATURES
SET UP
TROUBLE?
15
15-16
· TV / Teletext / Video / etc.
16
2/19/2007 9:34:40 AM
Watching TV
2
4
5
6
7
8
9
The power lamp on the TV
dims slightly.
 Press again to turn the screen off
and put the TV into standby mode.
 Power on
AV
 “Basic operations using the TV
buttons”
2
P
Display the
Current time
INFORMATION
Select a channel
PR
ID
AV
01
02
03
04
05
06
07
08
09
_____
BBC1
 Select a page 
15 :

down
 Switch between stereo / mono /
bilingual broadcasting
(No indication)

2 view
 Move up or down a channel
up
Time (in case of having viewed teletext)
1 select
E.g.

12 : 00
select
 Select and view a channel 
1:
BBC1
1
 Channels
registered in
“Initial settings” will
appear here.
ZOOM
Change the aspect
ratio
1 select
AUTO
REGULAR
PANORAMIC
14:9 ZOOM
16:9 ZOOM
16:9 ZOOM SUBTITLE
FULL
ZOOM
2 set
 Using “AUTO”
“AUTO in “ZOOM”” (P. 32)
 When 720p (750p) or 1080i (1125i) signal
is received, the signal will be displayed
as “FULL”. The zoom menu will not be
displayed.
PREPARE
P
“PR LIST”
PR LIST
IMPORTANT!
0
1
3
ENGLISH
1
Turn on from standby
 “STEREO / t·u” ( P. 26)
Note
 Mute
ON
 To completely turn off the TV, unplug the
power plug.
 Volume
Basic operations using the TV buttons
1
ON
OFF : Turns off “3D CINEMA SOUND”
 Adjust the ambience level
 “MENU”  “SOUND”  “3D CINEMA SOUND”
Power on
3D CINEMA SOUND
2
P
Change
the channel
SURROUND
BASS BOOST
MID
MID
1 select “SURROUND”
level
2 select
3D CINEMA SOUND
6
P
MID
HIGH
LOW
MID
HIGH
3 set
 Emphasize the bass sound
3D CINEMA SOUND
SURROUND
BASS BOOST
MID
MID
1 select “BASS BOOST”
level
3 set
 “3D CINEMA SOUND” does not work with headphones.
TROUBLE?
2 select
17-18
LOW
SETTINGS
Enjoy ambient
sound
 Volume
17
USE
3D CINEMA SOUND
: For “3D CINEMA SOUND”
18
2/19/2007 9:34:56 AM
Viewing teletext
1
When watching TV
 Confirm the mode is set to g.
VCR
2
3
4
5
6
7
8
9
0
2
AV
HOLD
DVD
 Release  Press “
Enter a teletext page
TEXT
1
2
4
5
6
7
8
9
0
 Move up or down a page
P
” again
3
AV
Reveal
hidden pages
Display hidden information
(answers to quizzes, etc.)
REVEAL
ZOOM
up
P
DVD
Display sub-pages
View
sub-pages
VCR
down
Sub-page
 Release  Press “
DVD
Enlarge
the text
SIZE
” again
USE
1
Display your
favourites list
up
Double the size of the
displayed text
P
PREPARE
down
P
VCR
IMPORTANT!
1
ENGLISH
Hold the
current page
(Red) (Green) (Yellow) (Blue)
To the
index page
Returns to page “100”
or a previously designated page
INDEX
LIST MODE
2
Enter the number of the page to save
Switch briefly
from teletext
to TV
Leave the current page open,
while you switch to watch TV
CANCEL
 Recall your favourite page  Press the coloured button as in step 2
19
19-20
 Useful when running a page search.
TROUBLE?
3
Select a coloured button to save your page to
SETTINGS
Bookmark
your favourite
page
20
2/19/2007 9:35:22 AM
Watching videos / DVDs
1
Select the video source
AV (PR 0)
Switch
to S-VIDEO
input
E1
E.g. For EXT-1
2
AV
TV
OK
E4
2
DVD
DVD
VCRs and DVD recorders
DVD players
Turn on the device
TV
(Yellow)
EXT SETTING
EXT-3
TV
TV
V
select
Record / Display DVD top menu
Select a chapter (DVD mode)
 Some models of JVC devices cannot be operated with this remote control.
Edit names
of connected
devices
ID LIST
DUBBING
EXT-2
EXT-3
TV
TV
MENU
21-22
VHS
S-VHS
DVC
CAM
SAT
STB
GAME
DVD
DVR
3 Select a name from the list
EXT SETTING
EXT-1
DUBBING
EXT-2
ID LIST
VHS
S-VHS
DVC
CAM
SAT
STB
GAME
DVD
DVR
TV
EXT SETTING
1 select
EXT-1
DVD
DUBBING
EXT-2
EXT-3
TV
2 set
 Clear the name  Select the blank space in 3
Select “EXT SETTING”
1 select
1 select
SET UP
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
HDMI SETTING
PICTURE
SOUND
FEATURES
SET UP
2 next
21
ID LIST
Set up
dubbing on
“EXT-2”
DUBBING
ON
2 next
1 Select the arrow
EXT SETTING
EXT-1
DUBBING
EXT-2
2 Select the dubbing source
select
EXT SETTING
EXT-1
EXT-3
EXT-3
TV
TV
DUBBING
EXT-2
select
TROUBLE?
2
Select “SET UP”
DUBBING
EXT-2
EXT-1
SETTINGS
1
Display the menu
EXT SETTING
(Blue)
EXT-3
EXT-3
Advanced functions
2 Show the name list
USE
Operate the
VCR (DVD)
P
” in 2 again
1 Select an “EXT” to assign a name to
Stop / Power OFF
OK
Pr/Pb/Y
(Yellow)
 Return to composite input  Press “
EXT-1
MENU
DUBBING
EXT-2
EXT-1
EXT-3
EXT SETTING
P
EXT SETTING
Select a channel (VCR mode)
Rewind / Playback / Fast-forward
 To TV
2 Set to component input
select (Yellow)
DUBBING
EXT-2
EXT-1
y
” in 2 again
1 Select the “EXT-3”
Pr/Pb/Y
V
3
TV
PREPARE
Switch
between
component
and
composite
input
DUBBING
EXT-2
EXT-1
EXT-3
 Cancel this mode  Press “
 The device
selection
display will
change from
“E2” to “S2”.
EXT SETTING
EXT-3
S-IN
*1: Only appears when AV
has been registered as
a channel.
VCR
1
P
VCR
E3
Operate JVC VCRs and other devices
MENU
P
E5
select (Yellow)
DUBBING
EXT-2
EXT-1
2 Set the S-VIDEO mode
IMPORTANT!
0
Operate the connected
device and play a video
E2
EXT SETTING
ENGLISH
*1
E1 VCR
22
2/19/2007 9:35:28 AM
Try the
advanced
features
Useful functions
Hold down for 3 seconds
Press the number
to register it on
1 - 4?
SLEEP TIMER
Disappears after
a few seconds
PROGRAMMED!
Press the
number you
registered
1
1
BBC1
FAVOURITE
CHANNEL
 Press “
” and confirm that the channels you
have registered have a d beside them.
 Delete a favourite channel
 “MENU”  “FEATURES”  “FAVOURITE SETTING”
1
PR 01
2
PR 03
3
PR 05
4
PR 07
FAVOURITE SETTING
1
PR 01
2
PR 03
4
P
1
2
MENU
OK
Display “FEATURES” menu
 “Customising your TV” (P. 25)
FEATURES
SLEEP TIMER
CHILD LOCK
BLUE BACK
FAVOURITE SETTING
APPEARANCE
select
“CHILD LOCK”
ON
TYPE A
P
Stop
children from
watching
specific
channels
3
4
CHILD LOCK
5
6
1 enter an “ID NO.”
(a secret number of
your choice)
SET ID NO.
2 to the next column
CHILD LOCK
PR
AV
01
02
03
04
05
06
07
08
09
(Blue)
ID
_____
BBC1
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
CHILD LOCK
PR
AV
01
02
03
04
05
06
07
08
09
3 set
select a channel to lock
CH/CC
ID
_____
BBC1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
 Lock more channels
 Repeat steps 4 and 5
(Blue)
3
4
1 select a time in minutes
OFF
PR 07
 Release a channel  Press “ ” again in step 4
 View a locked channel  Use the numerical buttons to enter the channel number.
When n appears, press “
” and enter your “ID
NO.”. (If you forget your “ID NO.”, check it in step 2.)
23
23-24
· Set a time for the TV to turn itself off
· Stop children from watching specific channels
TROUBLE?
delete
(Blue)
2 next
SLEEP TIMER
SETTINGS
select
FAVOURITE SETTING
TYPE A
USE
 Check your favourite channels
ON
this process.
FAVOURITE 1 - 4?
 Customisations
(P. 26) to the picture
of a favourite
channel get saved
as well.
SLEEP TIMER
CHILD LOCK
BLUE BACK
FAVOURITE SETTING
APPEARANCE
 Cancel  Set the time to “0” in step 2
 Remaining time  You can confirm the remaining time at step 2, after repeating
AV
ZOOM
TV
Register a
channel to a
button
1 select “SLEEP TIMER”
FEATURES
PREPARE
0
 Recall the favourite channel
3
 “Customising your TV” (P. 25)
IMPORTANT!
SET
Set a time
for the TV to
turn itself off
Display “FEATURES” menu
ENGLISH
1
2
While the channel is displayed
24
2/19/2007 9:35:33 AM
Just the way
you like it
Customising your TV
MENU
PICTURE
SOUND
FEATURES
SET UP
MENU
OK
2 next
P
4
1 adjust /
select
2 set
PICTURE
STANDARD
PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
COOL
Sub-menu
 When adjusting
with the sliding-bar
Adjustments / Configurations
1 adjust
STANDARD
STANDARD
The item will change.
CONTRAST
Contrast (Lower  Higher)
BRIGHT-2
Brightness (Darker  Brighter)
SHARP
Sharpness (Softer  Sharper)
COLOUR
Colour (Lighter  Deeper)
HUE (NTSC only)
Tint (Reddish  Greenish)
COLOUR TEMP.
Colour temperature (WARM / NORMAL / COOL)
FEATURES
Finer picture adjustments (P. 27)
STEREO / t · u
Mode / Language (v : MONO / s : STEREO / t : SUB1 / u : SUB2)
BASS
Low tones (Weaker  Stronger)
TREBLE
High tones (Weaker  Stronger)
BALANCE
Speaker balance (Left Stronger  Right Stronger)
HYPER SOUND
Ambient sound (ON / OFF)
3D CINEMA SOUND
Finer sound adjustments (P. 18)
SLEEP TIMER
Timer for turning off the TV (P. 24)
CHILD LOCK
Stops children from watching specific channels (P. 24)
BLUE BACK
Displays a blue screen and mute the sound when the signal is weak or absent
(ON / OFF)
1 select
2 set
FAVOURITE SETTING Clear favourite channel settings (P. 23)
APPEARANCE
Format for displaying the channel number
(TYPE A / TYPE B)
AUTO PROGRAM
Select a country, it automatically registers channels (P. 10, !)
EDIT / MANUAL
Change registered channels or add new ones (P. 11)
LANGUAGE
Select a language for on-screen menus (P. 10, Ÿ)
DECODER (EXT-2)
For when connected to VCR with “T-V LINK” (ON / OFF)
EXT SETTING
For use with video players and other devices (P. 22)
HDMI SETTING
HDMI 1 (EXT-4) : SIZE (1 / 2 / AUTO), AUDIO (DIGITAL / ANALOGUE / AUTO)
HDMI 2 (EXT-5) : SIZE (1 / 2 / AUTO)
 Other settings · Change the aspect ratio  “ZOOM” (P. 17)
· Turn on “3D Cinema Sound”  “3D CINEMA SOUND” (P. 17)
25
25-26
TROUBLE?
 Some items have a
sub-menu.
2 set
SET UP
 When selecting
from presets
Backlight brightness (Darker  Brighter)
SETTINGS
Move
BRIGHT-1
USE

 The menu disappears
after one minute of
inactivity.
COOL
Items
Adjust / Configure
Picture mode (BRIGHT / STANDARD / SOFT)
STANDARD
PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
FEATURES
 Exit
select
PICTURE MODE
PREPARE

PICTURE
SOUND
 To the previous
screen
3
Select an item
IMPORTANT!
1 select
Item
ENGLISH
TV
2
Select a menu
Menu
PICTURE
P
1
Display the menu
26
2/19/2007 9:35:36 AM
Advanced picture adjustment
By default, the TV automatically adjusts itself for the best picture.
PICTURE
SOUND
FEATURES
SET UP
Select “FEATURES”
PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
5
Select an item
2 next
COLOUR SYSTEM
Change settings
PAL
1 select
FEATURES
DIGITAL VNR
D igiPure
MOVIE THEATRE
COLOUR SYSTEM
4:3 AUTO ASPECT
When there is
no colour
OFF
ON
AUTO
2 set
COLOUR SYSTEM
Finish
4:3 AUTO ASPECT
27-28
· Reduce noise / Watch a more natural picture
Select the colour system
PAL
: Western
Europe
4:3 AUTO ASPECT
PANORAMIC
REGULAR
14:9 ZOOM
SECAM
NTSC 3.58
: Eastern Europe : USA
/ France
3.58 MHz
NTSC 4.43
: USA
4.43 MHz
AUTO
: When watching
videos, etc.
Select a default aspect ratio for AUTO in
“ZOOM” (P.17)
PANORAMIC
REGULAR
14:9 ZOOM
16 : 9
4:3
14 : 9
TROUBLE?
Set a default
aspect ratio
27
AUTO
: Automatically
adjusts
OFF
ON
AUTO
E.g. “DIGITAL VNR”
6
ON
: Function is
always on
MOVIE THEATRE
1 select
FEATURES
DIGITAL VNR
DigiPure
MOVIE THEATRE
COLOUR SYSTEM
4:3 AUTO ASPECT
For smooth
cinema film
SETTINGS
after one minute of
inactivity.
OFF
: Function is
turned off
COOL
 Exit

AUTO
DigiPure
USE

ON
:When the picture
loses sharpness
STANDARD
 To the previous
screen
OFF
: Function is
turned off
1 select
PICTURE
2 next
4
ON
For
natural-looking
outlines
PREPARE
P
ON
: When noise
appears
1 select
MENU
2 next
3
OFF
: Function is
turned off
DIGITAL VNR
MENU
OK
ON
IMPORTANT!
2
Select “PICTURE”
To reduce noise
ENGLISH
P
TV
1
Display the menu
28
2/19/2007 9:35:40 AM
When you
have trouble
Troubleshooting
Problem
 Press “
26
28
Poor picture quality
 Unnatural colour >>> Adjust “COLOUR” and “BRIGHT”.
Check your “COLOUR SYSTEM”.
 Noise >>> Set to the following functions.
PICTURE MODE : STANDARD
DIGITAL VNR :
ON
DigiPure :
OFF
 Dull picture >>> Set to the following functions.
PICTURE MODE : BRIGHT
DIGITAL VNR :
OFF
DigiPure :
ON
22
Strange picture
when using an external
device
 If you connected S-Video output device, check the “S-IN”
setting.
 If the top of the image is distorted, check the video signal
quality itself.
 If movement appears unnatural when receiving a signal from
a DVD player, etc. with 625p (progressive-scanning), change
the output setting of the external device to 625i (interlacescanning).
Poor sound
 Adjust the “BASS” and “TREBLE”.
If receiving a poor signal in “STEREO / t·u”, switch to “MONO”.
Adjust the channel reception using “MANUAL”.
26
26
11
Patterns, stripes
or noise
I can’t turn it on!
 Is the power cord connected to the AC outlet
correctly?
3
6
9
5
1
26
28
28
26
28
28
USE
2
Picture
 Is the aerial receiving interference
from high-voltage power lines or
wireless transmitters?
 Consult your retailer
 Are connected devices too close
to the TV?
 Insert the minimum distance
between the aerial and the
cause of interference until no
interference
17
” to return to your settings.
8
4
7
0
Ghosting
(Doubling of images)
–
–
SETTINGS
The remote
control doesn’t
work!
29-30
TROUBLE?
29
 Are the batteries flat?
 Are you more than 7 meters away
from the TV?
 Is the ““VCR/g/DVD” SWITCH” set to “g”?
 When viewing teletext, the TV menu does
not appear.
 Depending on the stability of the signal, there
may be a time lag when changing channels.
Sound
 Are you receiving interference
from signals reflected off
mountains or buildings?
 Adjust the direction of your
aerial, or change to a
good-quality directional aerial
PREPARE
Aspect ratio changes
unintentionally
–
IMPORTANT!
 Unplug TV, several minutes later plug it in again.
ENGLISH
Remote control
stops working
Screen
 Is the TV connected correctly to
the aerial?
 Change the direction of the aerial.
 Is the aerial or its cable
damaged?
page
Basics
Severe noise or
snow
Actions
30
2/19/2007 9:35:42 AM
Troubleshooting
Problem
Actions
 Switch “SIZE” in “HDMI SETTING” to “1” or “2”.
page
26
Receivable broadcast systems
No picture, no sound
 Use the cable marked with HDMI logo.
–
Depending on the country selected during “AUTO PROGRAM”, the receivable broadcast system differs.
 FRANCE: Can receive SECAM-L.
To receive SECAM-L in countries other than France:
1) Change the “COUNTRY” to “FRANCE” in “AUTO PROGRAM”.
2) Press the “BACK” button to return to the menu and enter the channel using “INSERT” or “MANUAL”.
No sound
 Check if the device is compliant with HDMI.
 Switch “AUDIO” in “HDMI SETTING” to “DIGITAL” or “AUTO”
for HDMI devices, or “ANALOGUE” or “AUTO” for DVI devices.
(Not available for “EXT-5”.)
–
26
PREPARE
HDMI
Connect “DVI” devices
Connect a “DVI“ device to “EXT-4 (HDMI)” using “DVI-HDMI” conversion cable. Connect analogue sound output of
the DVI device to L and R terminals in EXT-3.
 Set “AUDIO” in “HDMI SETTING” to “ANALOGUE” or “AUTO”  (P. 26)
 EXT-5 input does not support analogue sound (EXT-3).
 EXT-5 input does not support DVI devices.
IMPORTANT!
“T-V LINK” allows the TV to share information easily with a connected “T-V LINK” compatible device.
By using T-V LINK :
 You can send the channel information programmed on the TV to the “T-V LINK” compatible device, so that
both the TV and the external device have the same channel settings. When connecting a new external device,
channel information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer
to the external device’s manual.
 You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the
“DIRECT REC” feature. For more details, refer to the external device’s manual.
ENGLISH
Wrong screen size
Technical information
(continued)
AUTO in “ZOOM”
–
“FEATURE NOT
AVAILABLE” appears
 Is the “T-V LINK” compatible device connected to “EXT-2”?
 Is the SCART CABLE “Fully Wired”?
 Is the “T-V LINK” compatible device turned on?
After confirming all the conditions above, press “OK” button
again.
32
32
–
TROUBLE?
 It is not a malfunction. Some functions in the menu do not
display depending on the situation.
SETTINGS
Some functions do not
work
USE
–
Display
31-32
 Wait a little for the signal to stabilize when switching the
signal format for an “HDMI” device.
Functions
31
Green and distorted
screen
When “AUTO” is selected in ZOOM, the aspect ratio will turn to the ratio obtained from the information the TV
received.
 The aspect ratio will turn to the ratio obtained from WSS (Wide Screen Identification Signal), video signal, or
control signal of the external devices. Without receiving the aspect information, it will be the setting in “4:3 AUTO
ASPECT” (P. 28)
32
2/19/2007 9:35:43 AM
“CH/CC” List
Specifications
CC
Channel
CC 01/CC 201 S1
CC
Channel
CC 31/CC 231 S31
CH 03/CH 203
CH 04/CH 204
CH 05/CH 205
CH 06/CH 206
CH 07/CH 207
CH 08/CH 208
CH 09/CH 209
CH 10/CH 210
CH 11/CH 211
CH 12/CH 212
CH 21/CH 221
CH 22/CH 222
CH 23/CH 223
CH 24/CH 224
CH 25/CH 225
CH 26/CH 226
CH 27/CH 227
CH 28/CH 228
CH 29/CH 229
CH 30/CH 230
CH 31/CH 231
CH 32/CH 232
CH 33/CH 233
CH 34/CH 234
CH 35/CH 235
CH 36/CH 236
CH 37/CH 237
CH 38/CH 238
CH 39/CH 239
E3, ITALY A
E4, ITALY B, R2
E5, ITALY D, R6
E6, ITALY E, R7
E7, ITALY F, R8
E8, R9
E9, ITALY G
E10, ITALY H, R10
E11, ITALY H+1, R11
E12, ITALY H+2, R12
E21, R21
E22, R22
E23, R23
E24, R24
E25, R25
E26, R26
E27, R27
E28, R28
E29, R29
E30, R30
E31, R31
E32, R32
E33, R33
E34, R34
E35, R35
E36, R36
E37, R37
E38, R38
E39, R39
CH 41/CH 241
CH 42/CH 242
CH 43/CH 243
CH 44/CH 244
CH 45/CH 245
CH 46/CH 246
CH 47/CH 247
CH 48/CH 248
CH 49/CH 249
CH 50/CH 250
CH 51/CH 251
CH 52/CH 252
CH 53/CH 253
CH 54/CH 254
CH 55/CH 255
CH 56/CH 256
CH 57/CH 257
CH 58/CH 258
CH 59/CH 259
CH 60/CH 260
CH 61/CH 261
CH 62/CH 262
CH 63/CH 263
CH 64/CH 264
CH 65/CH 265
CH 66/CH 266
CH 67/CH 267
CH 68/CH 268
CH 69/CH 269
E41, R41
E42, R42
E43, R43
E44, R44
E45, R45
E46, R46
E47, R47
E48, R48
E49, R49
E50, R50
E51, R51
E52, R52
E53, R53
E54, R54
E55, R55
E56, R56
E57, R57
E58, R58
E59, R59
E60, R60
E61, R61
E62, R62
E63, R63
E64, R64
E65, R65
E66, R66
E67, R67
E68, R68
E69, R69
CC 02/CC 202
CC 03/CC 203
CC 04/CC 204
CC 05/CC 205
CC 06/CC 206
CC 07/CC 207
CC 08/CC 208
CC 09/CC 209
CC 10/CC 210
CC 11/CC 211
CC 12/CC 212
CC 13/CC 213
CC 14/CC 214
CC 15/CC 215
CC 16/CC 216
CC 17/CC 217
CC 18/CC 218
CC 19/CC 219
CC 20/CC 220
CC 21/CC 221
CC 22/CC 222
CC 23/CC 223
CC 24/CC 224
CC 25/CC 225
CC 26/CC 226
CC 27/CC 227
CC 28/CC 228
CC 29/CC 229
CC 30/CC 230
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
CC 32/CC 232
CC 33/CC 233
CC 34/CC 234
CC 35/CC 235
CC 36/CC 236
CC 37/CC 237
CC 38/CC 238
CC 39/CC 239
CC 40/CC 240
CC 41/CC 241
CC 75/CC 275
CC 76/CC 276
CC 77/CC 277
CC 78/CC 278
CC 79/CC 279
CH
CH 102
Channel
F2
CH
CH 141
Channel
F41
CC
CC 110
Frequency (MHz)
116-124
CC
CC 152
Frequency (MHz)
391-399
CH 103
CH 104
CH 105
CH 106
CH 107
CH 108
CH 109
CH 110
CH 121
CH 122
CH 123
CH 124
CH 125
CH 126
CH 127
CH 128
CH 129
CH 130
CH 131
CH 132
CH 133
CH 134
CH 135
CH 136
CH 137
CH 138
CH 139
CH 140
F3
F4
F5
F6
F7
F8
F9
F10
F21
F22
F23
F24
F25
F26
F27
F28
F29
F30
F31
F32
F33
F34
F35
F36
F37
F38
F39
F40
CH 142
CH 143
CH 144
CH 145
CH 146
CH 147
CH 148
CH 149
CH 150
CH 151
CH 152
CH 153
CH 154
CH 155
CH 156
CH 157
CH 158
CH 159
CH 160
CH 161
CH 162
CH 163
CH 164
CH 165
CH 166
CH 167
CH 168
CH 169
F42
F43
F44
F45
F46
F47
F48
F49
F50
F51
F52
F53
F54
F55
F56
F57
F58
F59
F60
F61
F62
F63
F64
F65
F66
F67
F68
F69
CC 111
CC 112
CC 113
CC 114
CC 115
CC 116
CC 123
CC 124
CC 125
CC 126
CC 127
CC 128
CC 129
CC 130
CC 131
CC 132
CC 133
CC 141
CC 142
CC 143
CC 144
CC 145
CC 146
CC 147
CC 148
CC 149
CC 150
CC 151
124-132
132-140
140-148
148-156
156-164
164-172
220-228
228-236
236-244
244-252
252-260
260-268
268-276
276-284
284-292
292-300
300-306
306-311
311-319
319-327
327-335
335-343
343-351
351-359
359-367
367-375
375-383
383-391
CC 153
CC 154
CC 155
CC 156
CC 157
CC 158
CC 159
CC 160
CC 161
399-407
407-415
415-423
423-431
431-439
439-447
447-455
455-463
463-469
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
X
Y, R3
Z, ITALY C, R4
Z+1, R5
Z+2
Model
Broadcasting systems
LT-42A80SU/ZU
LT-37A80SU/ZU
LT-32A80SU/ZU
CCIR I / B / G / D / K / L (See “Technical information”, P. 32)
Colour systems
TV broadcast : PAL, SECAM
External input : PAL, SECAM, NTSC 3.58/4.43MHz
Channels and frequencies
E2-E12 / E21-E69, F2-F10 / F21-F69, IR A-IR J, ITALY A-H / H+1 / H+2,
R1-R12 / R21-R69, S1-S41, X / Y / Z / Z+1 / Z+2,
French cable channels (Frequency : 116-172 MHz / 220-469 MHz)
Sound-multiplex systems
Teletext systems
Power requirements
Audio output (Rated power output)
Speakers
Power consumption
[standby]
NICAM (I / B / G / D / K / L), A2 (B / G / D / K)
FLOF (Fastext), TOP, WST (standard system)
AC 220 V - 240 V, 50Hz
10 W + 10 W
6W+6W
(16 cm x 4 cm) oval x 2
200 W
161 W
114 W
105 W
[1.2 W]
[1.6 W]
[1.6 W]
[1.6 W]
Screen size
(visible area size measured diagonally) 105 cm
92 cm
80 cm
LT-26A80SU/ZU
66 cm
Dimensions (W x H x D: mm)
[without stand]
1030 x 719.1 x 296 919 x 651.7 x 230 800 x 591 x 230
[1030 x 672 x 108] [919 x 603.7 x 108] [800 x 545 x 99]
672 x 519 x 230
[672 x 471 x 107]
Weights
[without stand]
Accessories
23.7 kg
19.5 kg
[21.9 kg]
[18.4 kg]
(See “Check accessories”, P. 5)
11.2 kg
[10.4 kg]
13.8 kg
[13.0 kg]
PREPARE
Terminals / Connectors
Terminal name
Terminal type
Signal type (IN)
EXT-1
Euroconnector x 1
(SCART connector)
Composite video,
Analog RGB
AUDIO L / R
EXT-2
Euroconnector x 1
(SCART connector)
Composite video, S-video,
Analog RGB
AUDIO L / R
RCA connectors x 5
Composite video,
Analogue component
(576i (625i) / 480i (525i),
Progressive : 576p (625p) / 480p (525p),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
HDMI connector x 1
HDMI
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
Input / Output
terminals
EXT-3
Signal type (OUT)
TV out
Dubbing out
EXT-4 (HDMI 1)
EXT-5 (HDMI 2)
Headphone
Stereo mini-jack x 1
(3.5 mm in diameter)
 We may change the design and specifications without notice.
Headphone
output
TROUBLE?
Output
terminals
“T-V LINK”
compatible
SETTINGS
Input terminals
Notes
USE
33-34
CH
Channel
CH 40/CH 240 E40, R40
IMPORTANT!
33
CH
Channel
CH 02/CH 202 E2, R1
Main unit
ENGLISH
To use the INSERT function (P. 11), find the “CH/CC” number corresponding to the TV’s Channel number from this
table.
 When the COUNTRY setting is “FRANCE”, select a three-digit CH/CC number.
34
2/19/2007 9:35:44 AM
LT-42DA8SU
LT-37DA8SU
LT-32DA8SU
LT-26DA8SU
LT-42DA8ZU
LT-37DA8ZU
LT-32DA8ZU
LT-26DA8ZU
WIDE LCD PANEL TV
16:9 LCD TV
TELEVISEUR A ECRAN LCD PANORAMIQUE
TELEVISOR CON PANEL LCD PANORÁMICO
NESTEKIDENÄYTÖLLÄ VARUSTETTU
LAAJAKUVATELEVISIO
BREDBILDS LCD-TV
ENGLISH
DEUTSCH
FRANÇAIS
CASTELLANO
SUOMI
SVENSKA
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES
KÄYTTÖOHJE
BRUKSANVISNING
Trade Mark of the DVB Digital Video Broadcasting
Project (1991 to 1996) Number : 4341, 4342, 4343, 4344
LCT2207-002A-U_Cover.indd 1-2
0207KTH-CR-MU
LCT2207-002A-U-EN
2/5/2007 1:41:27 PM
Dear Customer,
ENGLISH
This apparatus is in conformance with the valid European directives and standards regarding
electromagnetic compatibility and electrical safety.
[European Union]
Postfach 10 05 52
61145 Friedberg
Germany
Sehr geehrter Kunde, sehr geehrte Kundin,
DEUTSCH
dieses Gerät stimmt mit den gültigen europäischen Richtlinien und Normen bezüglich
elektromagnetischer Verträglichkeit und elektrischer Sicherheit überein.
Die europäische Vertretung für die Victor Company of Japan, Limited ist:
Postfach 10 05 52
61145 Friedberg
Deutschland
Cher(e) client(e),
legislation.
FRANÇAIS
Attention:
(Business users)
This symbol is only
Union.
Cet appareil est conforme aux directives et normes européennes en vigueur concernant la
compatibilité électromagnétique et à la sécurité électrique.
equipment.
Représentant européen de la société Victor Company of Japan, Limited:
Postfach 10 05 52
61145 Friedberg
Allemagne
Apreciado cliente,
ENGLISH
CASTELLANO
Benutzerinformationen zur Entsorgung alter Geräte
DEUTSCH
Este aparato cumple con las normativas y normas europeas respecto a la seguridad eléctrica y a la
compatibilidad electromagnética.
[Europäische Union]
El representante europeo de Victor Company of Japan, Limited es:
Postfach 10 05 52
61145 Friedberg
Alemania
Dieses Symbol zeigt an, dass das elektrische bzw. elektronische Gerät nicht als normaler
Haushaltsabfall entsorgt werden soll. Stattdessen sollte das Produkt zur fachgerechten
Entsorgung, Weiterverwendung und Wiederverwertung in Übereinstimmung mit der
Landesgesetzgebung einer entsprechenden Sammelstelle für das Recycling elektrischer
und elektronischer Geräte zugeführt werden.
Hyvä asiakas,
Die korrekte Entsorgung dieses Produkts dient dem Umweltschutz und verhindert mögliche
Schäden für die Umwelt und die menschliche Gesundheit, welche durch unsachgemäße
Behandlung des Produkts auftreten können. Weitere Informationen zu Sammelstellen und
dem Recycling dieses Produkts erhalten Sie bei Ihrer Gemeindeverwaltung, Ihrem örtlichen
Entsorgungsunternehmen oder in dem Geschäft, in dem Sie das Produkt gekauft haben.
SUOMI
Tämä laite on yhdenmukainen niiden voimassa olevien eurooppalaisten direktiivien ja standardien
kanssa, jotka koskevat sähkömagneettista yhteensopivuutta ja sähköturvallisuutta.
Victor Company of Japan, Limited:in Euroopan edustaja on:
Postfach 10 05 52
61145 Friedberg
Saksa
Bästa kund!
Hinweis:
SVENSKA
Denna apparat överensstämmer med gällande EU-direktiv och standarder beträffande
elektromagnetisk kompatibilitet och elsäkerhet.
Europarepresentant för Victor Company of Japan, Limited är:
Postfach 10 05 52
61145 Friedberg
Tyskland
i
Intro_WEEE.indd i-ii
Dieses Symbol ist nur
in der Europäischen
Union gültig.
Für die nicht fachgerechte Entsorgung dieses Abfalls können gemäß der
Landesgesetzgebung Strafen ausgesprochen werden.
(Geschäftskunden)
Wenn Sie dieses Produkt entsorgen möchten, besuchen Sie bitte unsere Webseite www.
jvc-europe.com, um Informationen zur Rücknahme des Produkts zu erhalten.
[Andere Länder außerhalb der Europäischen Union]
Wenn Sie dieses Produkt entsorgen möchten, halten Sie sich dabei bitte an die
entsprechenden Landesgesetze und andere Regelungen in Ihrem Land zur Behandlung
elektrischer und elektronischer Geräte.
ii
1/31/2007 2:29:59 PM
Informations relatives à l’élimination des appareils usagés,
à l’intention des utilisateurs
FRANÇAIS
Tietoja käyttäjille vanhojen laitteiden hävittämisestä
[Union européenne]
[Euroopan unioni]
Lorsque ce symbole figure sur un appareil électrique et électronique, cela signifie qu’il ne
doit pas être éliminé en tant que déchet ménager à la fin de son cycle de vie. Le produit
doit être porté au point de pré-collecte approprié au recyclage des appareils électriques et
électroniques pour y subir un traitement, une récupération et un recyclage, conformément à
la législation nationale.
Tämä symboli tarkoittaa, että sähkö- ja elektroniikkalaitteita ei tule laittaa talousjätteisiin,
kun ne poistetaan käytöstä. Sen sijaan tuotteet tulee toimittaa asianmukaiseen sähkö- ja
elektroniikkalaitteiden kierrätyspisteeseen, jossa ne käsitellään uusiokäyttöä ja kierrätystä
varten paikallisen lainsäädännön mukaan.
Kun hävität tuotteen asianmukaisella tavalla, autat säästämään luonnonvaroja ja
estämään mahdollisia ympäristö- ja terveyshaittoja, joita voisi aiheutua tämän tuotteen
vääränlaisesta hävittämisestä. Lisätietoja keräyspisteistä ja tämän tuotteen kierrätyksestä
saat paikkakuntasi viranomaisilta, kotitalousjätteiden keräyksestä huolehtivasta yrityksestä
tai liikkeestä, josta ostit tuotteen.
En éliminant correctement ce produit, vous contriburez à la conservation des ressources
naturelles et à la prévention des éventuels effets négatifs sur l’environnement et la santé
humaine, pouvant être dus à la manipulation inappropriée des déchets de ce produit. Pour
plus d’informations sur le point de pré-collecte et le recyclage de ce produit, contactez votre
mairie, le service d’évacuation des ordures ménagères ou le magasin dans lequel vous avez
acheté le produit.
Attention:
Ce symbole n’est
reconnu que dans
l’Union européenne.
Tuotteen vääränlaisesta hävittämisestä voi seurata paikallisen lainsäädännön mukaisia
rangaistuksia.
Des amendes peuvent être infligées en cas d’élimination incorrecte de ce produit,
conformément à la législation nationale.
Huomio:
(Yrityskäyttäjät)
(Utilisateurs professionnels)
Tämä symboli on
voimassa vain
Euroopan unionissa.
Jos haluat hävittää tämän tuotteen, web-sivustoltamme osoitteessa www.jvc-europe.com
löydät tietoja käytetyn tuotteen palautuksesta.
Si vous souhaitez éliminer ce produit, visitez notre page Web www.jvc-europe.com afin
d’obtenir des informations sur sa récupération.
[Muut maat Euroopan unionin ulkopuolella]
Jos haluat hävittää tämän tuotteen, tee se kansallisen lainsäädännön tai muiden
maassasi voimassa olevien määräysten mukaan, jotka koskevat vanhojen sähkö- ja
elektroniikkalaitteiden käsittelyä.
[Pays ne faisant pas partie de l’Union européenne]
Si vous souhaitez éliminer ce produit, faites-le conformément à la législation nationale ou
autres règles en vigueur dans votre pays pour le traitement des appareils électriques et
électroniques usagés.
Información para los usuarios sobre la eliminación de
equipos usados
Atención:
Este símbolo sólo es
válido en la Unión
Europea.
CASTELLANO
SVENSKA
[Europeiska gemenskapen]
Este símbolo indica que los aparatos eléctricos y electrónicos no deben desecharse junto
con la basura doméstica al final de su vida útil. El producto deberá llevarse al punto de
recogida correspondiente para el reciclaje y el tratamiento adecuado de equipos eléctricos y
electrónicos de conformidad con la legislación nacional.
Denna symbol anger att elektrisk och elektronisk utrustning inte ska kasseras som vanligt
hushållsavfall, när de inte ska användas mer. Istället ska produkten lämnas in på lämplig
återvinningsstation för elektrisk eller elektronisk utrustning, så att den kan tas om hand och
återvinnas i enlighet med ert lands lagstiftning.
Si desecha el producto correctamente, estará contribuyendo a conservar los recursos
naturales y a prevenir los posibles efectos negativos en el medio ambiente y en la salud
de las personas que podría causar el tratamiento inadecuado del producto desechado.
Para obtener más información sobre el punto de recogida y el reciclaje de este producto,
póngase en contacto con su oficina municipal, su servicio de recogida de basura doméstica
o la tienda en la que haya adquirido el producto.
Genom att avyttra denna profukt på rätt sätt, bidrar du till att bevara naturen och förhindrar
potentiellt negativa effekter på miljön och den mänskiliga hälsan, som annars kan bli
resultatet vid felaktig hantering av denna produkt. Kontakta ditt kommunkontor, det företag
som hanterar dina hushållssopor eller butiken där du köpt produkten, för mer information om
återvinningscentraler.
De acuerdo con la legislación nacional, podrían aplicarse multas por la eliminación
incorrecta de estos desechos.
(Empresas)
Si desea desechar este producto, visite nuestra página Web www.jvc-europe.com para
obtener información acerca de la retirada del producto.
Si desea desechar este producto, hágalo de conformidad con la legislación nacional vigente
u otras normativas de su país para el tratamiento de equipos eléctricos y electrónicos
usados.
Intro_WEEE.indd iii-iv
Information till användare gällande kassering av gammal
utrustning
[Unión Europea]
[Otros países no pertenecientes a la Unión Europea]
iii
SUOMI
Det kan hända att du bötfälls i enlighet med ert lands lagstiftning om detta avfall kasseras
på fel sätt.
Tänk på:
Att denna symbol
endast gäller inom
den Europeiska
gemenskapen.
(Företagsanvändare)
Om ni vill kassera denna produkt, besök vår webbsida www.jvc-europe.com för att få
information om returnering av produkten.
[Övriga länder utanför den Europeiska gemenskapen]
Om du vill kassera denna produkt, ska detta göras i enlighet med gällande lagstiftning i
landet, eller enligt andra bestämmelser i ditt land, för behandling av gammal elektrisk eller
elektronisk utrustning.
iv
1/31/2007 2:29:59 PM
beautiful images
Contents
DVB-T / VHF / UHF broadcasting
First things first!
 Warning ············································ 3
Video camera
 Names of all the parts ······················ 5
 Basic connections ···························· 7
 Connecting external devices ············ 9
 Initial settings ································· 11
DVD player
DVD recorder
Getting started
Audio components
PREPARE
Game console
IMPORTANT!
Digital camera
VCR
ENGLISH
Digital terrestrial broadcasting (DVB-T)
 Digital channels
Analogue terrestrial broadcasting (VHF
/ UHF) and analogue cable TV
 Analogue channels
Let’s try it out
USE
 Enjoying your new TV! ··················· 15
 Watching digital channels ·············· 17
 Using EPG ····································· 19
 Viewing teletext ······························ 21
 Watching analogue channels ········· 23
 Watching videos / DVDs ················ 25
 Using timer-record·························· 27
 Useful functions······························ 29
· Subtitle / Audio selection / Sleep timer /
Zoom, etc.
· Reduce noise / Watch a more natural
picture, etc.
 DTV configuration ·························· 39
 DTV setup ······································ 41
 DTV installation ······························ 43
 Editing digital channels ·················· 45
 Editing analogue channels ············· 47
 Troubleshooting ····························· 49
 “CH/CC” List ··································· 53
 Technical information ····················· 54
 Specifications ································· 58
1
1-2
TROUBLE?
SETTINGS
 Customising your TV ······················ 33
 Using DTV menu ···························· 35
 Advanced picture adjustment ········· 37
2
2/9/2007 11:12:16 AM
First things
first!
Warning
Do not allow the TV
to fall!
On disposal of the
TV!
the TV!
 Connect only to a 220-240V, 50Hz AC
outlet.
 Do not rest your elbows on, or allow
cause injuries.
 Follow the instruction in
(P. ii to iv).
 Placing liquids, naked
flames, cloths, paper,
etc. on the TV may
cause a fire.
Never try to repair
the TV yourself!
 If the problem cannot be solved in
retailer.
 The main power supply for this TV is
power plug.
 Unplug the power cord and contact
your retailer.
 It may damage your hearing.
 For more details on installation, usage and safety  Consult your retailer
3
3-4
 It may cause an electric shock.
Never obstruct the
ventilation holes!
 It may cause overheating or a fire.
Handle LCD panel
with care!
 Use a soft, dry cloth when cleaning.
scratch the screen!
 Do not touch the screen when carrying the
TV.
Do not carry the
TV on your own!
 In order to prevent accidents,
TROUBLE?
 See the included manual on mounting
procedures.
 JVC assumes no responsibility for
Never dismantle the
rear panel!
SETTINGS
 The power buttons on
the remote control and
the TV unit cannot
arrangements for
bedridden people.)
 It may cause a fatal
Never listen to
headphones at high
volume!
 If the power plug is not the
when going out!
USE
Never cut or damage
the power cord!
 To prevent fire or electric
shock, never allow
PREPARE
Place the TV as
possible!
moisture!
IMPORTANT!
the power plug!
ENGLISH
Follow this manual
regarding setup!
4
2/9/2007 11:12:18 AM
Getting
started
Switch between “VCR / TV / DVD”
Volume
(P. 25)
Change channel
/ volume, turn on from
standby (P. 17)
(P. 17)
Switch digital /
analogue channels
Power lamp
View teletext (P. 21)
Change the
channel / page
Check accessories
To menu (P. 33)
Select and
confirm settings in menus
To the previous channel
(Digital channels)
Volume
 When watching digital channels
USE
Remote control
(RM-C1821)
The coloured buttons can perform different
functions according to the situation.
Follow on-screen instructions.
For confirming
the TV works
PREPARE
IMPORTANT!
Channel information
Power On / Off
ON: Lit (Green)
STANDBY: Unlit
REC: Lit
Power On / Off
ENGLISH
Mute
 Other uses
View the electronic
programme guide (EPG) (P. 19)
Switch TV / RADIO (P. 17)
COUNTRY
START
MORE
Follow instructions
in on-screen guides.
View subtitles (P. 29)
Audio select (P. 29)
SETTINGS
OK
 When watching TV / Video
5
5-6
 When operating a JVC VCR
or DVD (P. 25)
TROUBLE?
Turn on “3D CINEMA SOUND”
(P. 30)
6
2/9/2007 11:12:20 AM
Basic connections
Connect the aerial
ENGLISH
 Connect with other devices  “Connecting external devices” (P. 9)
AERIAL
AERIAL
IMPORTANT!
EXT-1
EXT-2
PREPARE
USE
VCR / DVD recorder
 When using an aerial which needs external power  “Power supply for the indoor aerial” (P. 55)
 Connect the power cord only to a 220-240V, 50Hz
AC outlet.
 Installation requirements
 To avoid overheating, ensure the unit has ample
room.
 When attaching the TV to the wall, use the
7
7-8
200mm
150mm 50mm
150mm
50mm
Subscribe to a broadcasting company beforehand. A Smart
Card (B) will be sent by the broadcasting company after
subscribing to it. It may be necessary for you to purchase a
Conditional Access Module (A) in addition to the Smart Card.
Consult your broadcasting company or retailer.
1 Unplug the power cord
2 Insert “B” into “A”.
3 Insert “A”.
4 Plug the power cord, and turn the power on.
5 Perform necessary settings  “Common Interface” (P. 41)
 Pay-TV analogue channels cannot be watched.
A
B
TROUBLE?
 See the included manual on mounting procedures.
 JVC assumes no responsibility for damage due to
improper mounting.
 200mm × 200mm mount which conforms to VESA
standards.
SETTINGS
Watch pay-TV digital channels
Care when setting
 Power requirements
 Connect “T-V LINK” compatible recording device to “EXT-2”.
 “T-V LINK”  “What is “T-V LINK”?” (P. 11)
 When using an indoor aerial which needs external power, connect the aerial directly to the TV.
“Power supply for the indoor aerial” (P. 55)
8
2/9/2007 11:12:22 AM
Output 
Input 
· Sound L / R
RGB
· Sound L / R
: signal direction
 Connect “DVI” devices  (P. 54)
 “T-V LINK”  (P. 11)
ENGLISH
videos
EXT-2 Dubbing
DVD player
(HDMI compatible)
EXT-5
(HDMI compatible)
(HDMI 2)
broadcast tuner
· T-V LINK
EXT-1
EXT-2
VCR / DVD recorder
(T-V LINK)
EXT-3 Watching DVDs
EXT-3
Output 
Headphone
Headphone
AERIAL
 Switch input signal
“
Pr/Pb/Y,
 Switch input signal  “
(Component input)
Pr/Pb/Y,
V” (P.26)
(Composite input)
V” (P. 26)
EXT-4 Connecting
EXT-5 HDMI devices
Output 
USE
Not available.
Input 
· Composite signal
/ Component
signal (P. 58)
· Sound L / R
PREPARE
 Use S-VIDEO  “S-IN” (P. 26)
 Select dubbing sources
 “DUBBING” (P. 26)
 Connect a decoder
 “DECODER (EXT-2)” (P. 34)
IMPORTANT!
EXT-4
(HDMI 1)
Output 
Input 
· Sound L / R
RGB / S-VIDEO
· Sound L / R
Input 
· HDMI signal
(P. 58)
 “HDMI SETTING”  (P. 34)
 EXT-5 input does not support
analogue sound.
(L)
(R)
Game consoles
DIGITAL
AUDIO OUT
Listening to the digital audio of digital
channels on external speakers
CI (Common Interface) slot
(“Watch pay-TV digital channels” P. 8)
9
9-10
DVD player
Video camera
 The sound from analogue channels
and external devices cannot be
output.
““Dolby Digital” output from the
“DIGITAL AUDIO OUT” terminal”
 (P. 56)
TROUBLE?
Output 
· Digital sound (P. 56)
SETTINGS
DIGITAL
AUDIO OUT
Amplifier
(Digital optical compatible)
10
2/9/2007 11:12:23 AM
Initial settings
Begin
 The remote control
doesn’t work
 Shown only when powering on for the first time.
 The power button on the unit can also be used.
Set digital channels
1
3
 If the “JVC” logo does not appear or if you
wish to make changes later
 Digital channel settings : “Configuration” (P. 39)
“Installation” (P. 43)
Analogue channel settings : “SET UP” (P. 34)
1 select  Language for on-screen
displays when watching digital
channel including the DTV
menu.
First Time Installation > Language Setting
Step 1: Please choose language
Language
Castellano
Català
Deutsch
English
Français
Suomi
Svenska
2 set
1 select  Receivable digital channels will
differ depending on the country
setting.
 The illustrations are for Finland
2 set
First Time Installation > Country Setting
Step 2: Please choose country
Country
Finland
France
Germany
Spain
Sweden
Set the aerial power supply
__
Start Channel
__
Stop Channel
Add
Mode
Antenna Power
On
Start Scan
Off
TV/DTV
BACK
4
1 select  Only when using an aerial which
needs external power, select “On”.
 “Power supply for the indoor
aerial” (P. 55)
2 next
USE
 Exit 
Select a language
PREPARE
2
 To the previous screen 
 Confirm the mode is set to
“TV”.
IMPORTANT!
2
ENGLISH
1
Register digital / analogue channels on TV. These channels can be edited later.
(In this manual, digital terrestrial broadcasting is indicated as digital channels,
analogue terrestrial broadcasting and analogue cable TV as analogue channels.)
Scan digital channels
First Time Installation > Service Scan
Step 3: Please press OK
Service
Scan
Start Channel
Automatic
__
Stop Channel
__
Mode
Add
Service
Scan
YLE TV1
YLE TV2
YLE FST
Start Channel
Automatic
__
Stop Channel
__
Mode
Add
Start Scan
Start Scan
UHF33 : 3 Services found
 Analogue channels to be instantly
 The “DIRECT REC” function to be
used.
 “T-V LINK” variations
11
11-12
Register digital channels
Teema
Teema
Teema
Stop Channel
Mode services?
Scan completed! Store
Yes
__
Add
Start Scan
No
 If digital channels are not found, the following message will appear.
No services found!
OK

!
(Next page)
 After completing following steps, read “When the TV cannot find the digital
channels” (P. 14) and try scanning digital channels again
TROUBLE?
 “Technical information” (P. 54)
5
SETTINGS
12
2/9/2007 11:12:26 AM
Initial settings
 When change a language
select
 Language for
on-screen analogue
channel displays and
menus (excluding the
DTV menu)
LANGUAGE
 When not using analogue channels 
Check the following points

 Is the TV connected correctly to the aerial?
 Change the direction of the indoor aerial.
 Is there a digital channels transmission tower nearby?
 Turn “ATTENUATOR” to “ON” (P. 34), since the radio waves are too strong.
@

⁄
Set analogue channels
 Register digital channels again  “Service Scan” (P. 43)
Register analogue channels
 If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.  Consult your retailer
 When change a country
COUNTRY
select
When the digital channel reception is poor
(blue)
PREPARE
1
IMPORTANT!
 When using analogue channels (or cable TV) 
4
When the TV cannot find the digital channels
ENGLISH
3
Confirm the language
(continued)
AUTO PROGRAM
The “Missing or weak signal” message appears.
CH 02
0%
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
YLE1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
Set T-V LINK
 Edit analogue channels
 Confirm
 When using “T-V LINK”
 When not using
“T-V LINK”
 @ in “Editing analogue
channels” (P. 47)
 Check digital channels signal  Signal Check (P. 43)
T-V LINK
DOWNLOAD TV
 Edit digital channels  Editing digital channels (P. 45)
 If digital channel reception is poor  When the digital channel reception is poor (P. 14)
 Some digital channels cannot be watched on this TV.  (P.55)
13-14
When “RF Attenuator” setting screen is displayed
 Set “ATTENUATOR” (P. 34) from this setting screen.
To set the “ATTENUATOR” on select “On”, to set it off select “Off”
 This setting screen will appear during the “Factory Settings” (P. 43) with “ATTENUATOR” set to “ON”.
TROUBLE?
Initial setting is complete
 If analogue channel reception is poor  Troubleshooting (P. 49)
13
 If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.  Consult your retailer
RECORDING DEVICE
 Is a “T-V LINK” compatible
5
 Is the TV connected correctly to the aerial?
 Change the direction of the indoor aerial.
 Is there a digital channels transmission tower nearby?
 Turn “ATTENUATOR” to “ON” (P. 34), since the radio waves are too strong.
SETTINGS
3
USE
2
14
2/9/2007 11:12:27 AM
Let’s try it out
ENGLISH
 View channel information
 Select a channel
 Listen to the radio
PAGE
25
PAGE
Watching
videos / DVDs
IMPORTANT!
Watching
digital channels
 Watch high quality video (S-VIDEO)
 Name connected devices
 Dub videos
 Display the current time
 Using the PR list
33
PAGE
USE
 Adjust the picture
 Adjust the sound
Viewing teletext
 Enlarge the text
 Bookmark your favourite pages
 Reveal hidden pages
15
15-16
Using EPG
 View the programme list
for 8 days
 Search from a genre
 Reserve a programme to
watch / record
PICTURE
SOUND
FEATURES
SET UP
DTV
 Advanced settings
 Basic settings
 Setting digital channels
(timer-record / configuration / channel settings, etc.)
TROUBLE?
19
PAGE
MENU
SETTINGS
21
PAGE
PREPARE
17
Watching
23 analogue channels
PAGE
16
2/9/2007 11:12:30 AM
Watching digital channels
1
2
Power on
Symbols Name of station
Channel
Channel
information
More information
 Symbols description
: More information about the programme is available.


 View subtitles / Select audio
language  (P. 29)
1
2
3
4
5
6
7
8
9
13
Using PR list
2 view
EPG
Electronic Programme Guide
14:00 05/05/2006
1.
2.
3.
4.
5.
6.
7.
8.
9.
2 select a channel
YLE TV1
YLE TV2
MTV3
Nelonen
YLE FST
Subtv
Urheilukanava
YLE24
YLE Teema
1 select the channel column
14:00 Uutiset
15:00 Golf
17:00 Uutiset
17:15 Musiikki
18:00 Sää
18:20 Uutiset
18:50 Jalkapallo
20:20 Uutiset
20:30 Sää
3 view
 Display only programmes which match your
selected genre  “Genre” (P. 20)
17-18
 Enter a channel number
E.g.
up
1:


15 :


down
 You can select only from your favourite
channels  “Favourite Mode” (P. 39)
TROUBLE?
17
Using the
number buttons,
up / down buttons
SETTINGS
05/05
06/05
07/05
08/05
09/05
10/05
11/05
12/05
Using EPG
 Switch to digital channels
 The channels and programme names shown in the illustrations here
are examples only.
 Channels registered in “Initial
settings” will appear here.
 You can select only from your
favourite channels  “Favourite
Mode” (P. 39)
1 select
YLE TV1
YLE TV2
MTV3
Nelonen
YLE FST
Subtv
Urheilukanava
YLE24
YLE Teema
MTV3+
USE
PR List
PR List
YLE TV1
14:00-15:00 Uutiset
P
PREPARE
: Subtitles are available (P. 29).
Channels
 Volume
: Minimum viewing age limit of the programme.
Set viewing age limit.  (P. 39)
 The information displayed may differ from programme to programme.
 When the clock is off  “Set the clock to the right time” (P. 55).
 Select the default language for programme name and programme information  “EPG Language” (P. 40).
 To the previous channel
Change
the channel
: Pay-TV channel
Dolby Digital : Dolby Digital signal is output from the “DIGITAL AUDIO OUT” terminal (P. 56)
Power on
P
: Radio programme
: t : Audio in another language is not available.
u : Other audio languages are available (P. 29).
2
Yellow
Green
: Acceptable : Excellent
: Teletext is available (P. 22).
Select a channel
Note
Red
: Poor
: TV programme
t-u
 “Services have changed” is displayed.
 Updating PR list (P. 57)
 To completely turn off the TV, unplug the AC plug.
 Watch pay-TV digital channels  (P. 8)
 Add a new station  (P. 43)
 Some digital channels cannot be watched on this
TV.  (P. 55)
(No indication)
CH33
Switch TV / RADIO
5
Programme
Kotimaan uutiset
Ulkomaan uutiset
Talousuutiset
Urheilu-uutiset
: Reception level
4
Clock
Uutiset
Golf
 Whenever
changing the
channel, “Channel
Information” is
displayed.
IMPORTANT!
3
Switch to digital channels
Now : 14:00 - 15:00
Next : 15:00 - 17:00
14:00
The green power lamp
on the TV lights.
1
5
YLE TV1
1
 Volume
Symbols
ENGLISH
 Mute
Set to “TV”
18
2/9/2007 11:12:40 AM
Using EPG
(Electronic Programme Guide)
1
 Switch TV / RADIO
2
Display EPG
TV
Genre
Radio
14:00
05/05/2006
05/05
06/05
07/05
08/05
09/05
10/05
11/05
12/05
1.
2.
3.
4.
5.
6.
7.
8.
9.
Date

Channel
2 search
 Only one genre can be
selected.
Your selected genres are displayed
14:00
05/05/2006
05/05
06/05
07/05
08/05
09/05
10/05
11/05
12/05
1.
2.
3.
4.
5.
6.
7.
8.
9.
YLE TV1
YLE TV2
MTV3
Nelonen
YLE FST
Subtv
Urheilukanava
YLE24
YLE Teema
15:00 Golf
18:50 Jalkapallo
22:30 Tennis
 Only programmes in the selected genre are displayed.
General
Music
Movie
Culture
News
Current Affairs
Entertainment
Education
Sports
Leisure
Children
Special
 Watch / listen to the programme  (P. 18)
 Reserve the programme
Reserve a
programme
to watch and
record
Timer
2
3
Display “Timer”
 Select the reserved programme beforehand.
(red)
Set “Timer”

¤ in “Using timer-record” (P. 27)
Confirm the reservation
14:00
YLE TV1
14:00-15:00 Uutiset
05/05
06/05
07/05
08/05
09/05
10/05
11/05
12/05
1.
2.
3.
4.
5.
6.
7.
8.
9.
YLE TV1
YLE TV2
MTV3
Nelonen
YLE FST
Subtv
Urheilukanava
YLE24
YLE Teema
14:00 Uutiset
15:00 Golf
17:00 Uutiset
17:15 Musiikki
18:00 Sää
18:20 Uutiset
18:50 Jalkapallo
20:20 Uutiset
20:30 Sää
 For more details about the timer-record setting
 “Using timer-record” (P. 27)
(red) : Reserve to record
(blue) : Reserve to watch
: Reservation time is
shorter than the
broadcasting time
TROUBLE?
 The channels and programme names shown in the illustrations here are examples only.
1
SETTINGS
Find a programme
select a column
(date  channel  programme)
19-20
3 search
Find a programme
Programme
select a date / a channel / a programme
19
1 select
(red)
YLE TV1
15:00-17:00 Golf
 The genre may differ depending on your
country.
 Above illustrations are Genre icons for
Finland.
3
3
 Quick search
2 set /
cancel
 More than one genre can be selected.
Genre icon

1 select
Genre
All
General
Movie
News
Entertainment
Sports
Children
Music
Culture
Current A ffairs
 Search from genre
 Close EPG
 When the clock is off  “Set
the clock to the right time”
(P. 55).
 Select the default language
for programme name and
programme information
 “EPG Language” (P. 40).
Genre
14:00 Uutiset
15:00 Golf
17:00 Uutiset
17:15 Musiikki
18:00 Sää
18:20 Uutiset
18:50 Jalkapallo
20:20 Uutiset
20:30 Sää
Select a genre
USE
 Check programme
information
YLE TV1
YLE TV2
MTV3
Nelonen
YLE FST
Subtv
Urheilukanava
YLE24
YLE Teema
(green)
PREPARE
YLE TV1
14:00-15:00 Uutiset
Display only
programmes
which
match your
selected
genre
Display the genre List
IMPORTANT!
2
1
ENGLISH
You can find a digital channel programme from an eight-day programme guide, check its
information, and make a reservation.
20
2/9/2007 11:12:45 AM
Viewing teletext
When watching TV
Hold the
current page
HOLD
 Release  Press “ ” again
 Enter a teletext page
TEXT
Reveal
hidden pages
REVEAL
down
Display sub-pages
View
sub-pages
Sub-page
displayed text
(red) (green) (yellow) (blue)
down
up
Enlarge
the text
SIZE
LIST MODE
3
21-22
INDEX
Save
 Recall your favourite page  Press the coloured button as in step 2
21
To the
index page
Switch briefly
from teletext
to TV
CANCEL
 Useful when running a page search.
TROUBLE?
4
(RED) (GREEN) (YELLOW) (BLUE)
SETTINGS
Bookmark
your favourite
page
2
USE
 Release  Press “ ” again
Display your
favourites list
PREPARE
 Move up or down a page
up
IMPORTANT!
2
1
ENGLISH
1
Switch digital / analogue channels
22
2/9/2007 11:13:01 AM
Watching analogue channels
1
2
Power on
on the TV lights.
1
Channel
information and
clock
 “STEREO / t·u” (P. 34)
Using the
number buttons,
up / down buttons

15 :

down
USE
Press the number
to register it on
SET
1 - 4?
PROGRAMMED!
Disappears after
a few seconds
 Recall the favourite channel
Press the
number you
registered
Register a
channel to a
button
FAVOURITE
CHANNEL
1
1
YLE1
FAVOURITE 1 - 4?
 Check your favourite channels  Press “
” and confirm that the channels
you have registered have a d beside them
 Customisations
of a favourite
channel get saved
as well.
SETTINGS
2
Change
the channel
P
up
1:
While the channel
is displayed
Power on
E.g.
Hold down
for 3 seconds
1
(3 times)
2 view
 Press a channel number
Note
 To completely turn off the TV, unplug
the AC plug.
 To watch analogue channels, you must
register them beforehand.
 “AUTO PROGRAM” (P. 34)
 Volume
_____
YLE1
 Channels registered in “Initial settings” will appear here.
select
 Select a page 
Select a channel
 Switch between mono / stereo /
ID
AV
01
02
03
04
05
06
07
08
09
PREPARE
Using PR list
PR
 Close PR LIST
1 select
PR LIST
IMPORTANT!
PR LIST
Switch to analogue channels
4
(No indication)
12 : 00
YLE1
 “Time” is displayed
only when teletext
broadcasting can be
received.
3
Time
Channel information
ENGLISH
 Mute
Set to “TV”
 Delete a favourite channel
select
FAVOURITE SETTING
 Volume
 Switch to analogue channels
P
23
23-24
1
(blue)
FAVOURITE SETTING
PR 01
1
PR 01
2
PR 03
2
PR 03
3
PR 05
3
4
PR 07
4
PR 07
TROUBLE?
 “MENU”  “FEATURES”  “FAVOURITE SETTING”
24
2/9/2007 11:13:03 AM
AV
EXT-1
EXT-2
EXT-3
HDMI1
HDMI2
DTV
Switch
to S-VIDEO
input
2 watch
S-IN
DVD players
TV
TV
DTV
DTV
(yellow)
Switch
between
component
and
composite
input
EXT SETTING
V
ID LIST
 Some models of JVC devices cannot be operated with this remote control.
TV
TV
DTV
DTV
V
EXT SETTING
EXT-1
EXT-3
EXT-3
TV
TV
DTV
DTV
DUBBING
EXT-2
ID LIST
VHS
S-VHS
DVC
CAM
SAT
STB
GAME
DVD
DVR
EXT SETTING
EXT-1
DUBBING
EXT-2
ID LIST
VHS
S-VHS
DVC
CAM
SAT
STB
GAME
DVD
DVR
1 select
EXT SETTING
EXT-1
DVD
DUBBING
EXT-2
EXT-3
TV
SETTINGS
DTV
2 set
 Clear the name  Select the blank space in 3
Select “SET UP”
MENU
1 select
PICTURE
SOUND
FEATURES
SET UP
DTV
1 select
SET UP
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
HDMI SETTING
ATTENUATOR
ON
OFF
2 next
Set up
dubbing on
EXT-2
DUBBING
1 Select the arrow
EXT SETTING
EXT-1
EXT-3
DUBBING
EXT-2
select
EXT SETTING
EXT-1
EXT-3
TV
TV
DTV
DTV
DUBBING
EXT-2
select
TROUBLE?
25-26
Display the menu
2 next
25
(blue)
select
DUBBING
EXT-2
TV
2
Pr/Pb/Y
(yellow)
DTV
1
DUBBING
EXT-2
 Return to composite input  Press “ ” in 2 again
EXT-3
Advanced functions
EXT-1
EXT-3
EXT SETTING
Edit names
of connected
devices
 To TV
EXT SETTING
EXT-3
EXT-1
Stop / Pause
 The device
selection
display will
change from
“E2” to “S2”.
y
(yellow)
DUBBING
EXT-2
select
DUBBING
EXT-2
EXT-1
Pr/Pb/Y
Turn on the device
Operate the VCR (DVD)
EXT-1
EXT-3
EXT-3
USE
3
EXT SETTING
(yellow)
PREPARE
2
select
DUBBING
EXT-2
EXT-1
2 Set S-VIDEO input
 Cancel this mode  Press “ ” in 2 again
1
EXT SETTING
IMPORTANT!
2
0
1
2
3
4
5
6
1 select
EXT MODE
ENGLISH
1
26
2/9/2007 11:13:07 AM
Using timer-record
1
Switch to digital
channels
1
1 select
MENU
PICTURE
SOUND
FEATURES
SET UP
DTV
Reserve a
programme
to record
Record
2
Set
Select “Timer”
Radio programme
Timer
Installation
2 next
 Exit
5
6
Select an item
Timer
(red)
14:00 05/05/2006
Start
End
Date
Mode
Timer list empty
PR
1 select
Remind
 Cancel a reservation
(green)
 Select the reservation. Press “
press “OK” button.
”. Select “Yes” and
 Change a reservation
 Select the reservation and press “OK”.
(yellow)
 Search a channel using EPG  Press “ ”
27
27-28
: When “Maturity Rating” is set
to “Unlock”
Reserve a
programme to
watch
Remind
Prepare for recording
· Set the recording device to external input mode before the start time.
· Manually set the timer on “T-V LINK” incompatible devices. For details, refer to the device’s manual.
· Make sure that recording times on the recording device do not overlap with recording times on the TV.
· Some “T-V LINK” compatible DVD recorders may not work correctly.
 When Rec Timer has been set, the power lamp on the TV will :
Start blinking 3 minutes before the start time (green or red)
Light during recording (green or orange)
Input / confirm timer-record settings
PR
Start
Date
Mode
Select the channel
YLE TV1
17:15
05/05/2006
Once
Enter the time and date with number buttons
Select the reservation mode (Once / Daily / Weekly)
 A message will be displayed if there is problem with the reservation.
2
Set
TV programme
Radio programme
(blue)
PR
1 : YLE TV1
 If the TV’s power is off at the
start time, nothing happens.
 At the start time, the channel will
automatically change.
14:00 05/05/2006
Start
End
Date
Mode
17 : 15 - - - - - 05/05/2006 Once
 If you reserved the programme using EPG, the screen will return to EPG instead.
 Step 3 in “Timer” (P. 20)
TROUBLE?
7
14:00 05/05/2006
Start
End
Date
Mode
17 : 15 18 : 00 05/05 /2006 Once
SETTINGS
2 next
 Up to 20 programmes can be
reserved.

1
Please select timer
Record
1 : YLE TV1
USE
3
Edit PR
Set “Timer”
PR
 At the start time, the channel will
automatically change and the
device connected to “EXT-2” will
begin recording the programme.
 If you reserved the programme using EPG, the screen will return to EPG instead.
 Step 3 in “Timer” (P. 20)
1 select
DTV Menu
Setup

Normally set to “PCM” (PCM / Analogue, Dolby Digital)  (P. 56)
Set subtitle recording (Off / On)
Lock the recording with the maturity rating (Lock / Unlock)
TV programme
(red)
Configuration
 To the previous
screen
 A message will be displayed if there is problem with the reservation.
 In the following cases, enter the PIN code  “When entering the PIN Code” (P. 36)
· When changing the “Maturity Rating”
· When reserving a channel which is set to “Lock” (P. 45)
2 next
4
Select the channel
YLE TV1
17:15
18:00
05/05/2006
Once
PCM / Analogue
Off
Lock
PREPARE
3
Select “DTV”
PR
Start
End
Date
Mode
Audio
Subtitle
Maturity Rating
IMPORTANT!
2
Display the menu
Input / confirm timer-record settings
ENGLISH
DTV original function and setting, such as a recorder-linked timer-record setting,
can be selected from the DTV menu.
28
2/9/2007 11:13:09 AM
Useful functions
ON
ENGLISH
1 select
Subtitle Selection
OFF
ON
OFF
ON
 By default, the language set in “Subtitle Language”
(P. 39) is automatically selected.
When not broadcast in that language, another
broadcast language is automatically selected.
 When no subtitles are broadcasted, “No Subtitles” is
displayed.
 Switch to another language
Subtitle Selection
1 select “ON”
OFF
ON
2 next
1 select
ON
 Adjust the ambience level
3D CINEMA SOUND
SURROUND
BASS BOOST
MID
MID
2 select
Enjoy
ambient
sound
3D CINEMA
SOUND
Finnish
3 set
level
LOW
MID
HIGH
 Emphasize the bass sound
English
2 set
3D CINEMA SOUND
: Special subtitles for the hearing impaired
Undefined : When the subtitle’s language cannot be
identified
SURROUND
BASS BOOST
MID
MID
2 select
level
LOW
MID
HIGH
 “3D CINEMA SOUND” does not work with headphones.
By default, the language set in “Audio Language” (P. 39)
is automatically selected.
When not broadcast in that language, another broadcast
language is automatically selected.
AUDIO
SELECTION
(Digital channels)
1 select
Finnish
ZOOM
English
AUTO
REGULAR
PANORAMIC
14:9 ZOOM
16:9 ZOOM
16:9 ZOOM SUBTITLE
FULL
2 set
 The language that can be selected depends on the
broadcast.
 Please read ““Dolby Digital” output from the
“DIGITAL AUDIO OUT” terminal” (P. 56) before
selecting “Dolby”.
29
29-30
· Subtitle / Audio selection / Sleep timer / Zoom, etc.
Change the
aspect ratio
ZOOM
2 set
 Using “AUTO” “AUTO in “ZOOM”” (P. 54)
 When 720p (750p) or 1080i (1125i) signal is received, the signal will be
displayed as “FULL”. The zoom menu will not be displayed.
TROUBLE?
: Special audio track for the visually impaired
Undefined : When the audio’s language cannot be
identified
Dolby : Dolby Digital
1 select
SETTINGS
 Switch to another language
Audio Selection
USE
3 set
 The language that can be selected depends on the
broadcast.
Select audio
language
PREPARE
SUBTITLE
(Digital channels)
3D CINEMA SOUND
IMPORTANT!
View
subtitles
2 set
: Don’t display
: Display
30
2/9/2007 11:13:18 AM
Useful functions
1
1 select
MENU
PICTURE
SOUND
FEATURES
SET UP
Set a time
for the TV to
turn itself off
SLEEP TIMER
2 next
2 next
SLEEP TIMER
OFF
3
FEATURES
SLEEP TIMER
CHILD LOCK
BLUE BACK
FAVORITE SETTING
APPEARANCE
ON
1
TYPE A
Stop
children from
watching
specific
channels
4
5
SLEEP TIMER
CHILD LOCK
BLUE BACK
FAVORITE SETTING
APPEARANCE
select
“CHILD LOCK”
ON
TYPE A
(a secret number of your choice)
SET ID NO.
3 set
CHILD LOCK
PR
AV
01
02
03
04
05
06
07
08
09
(blue)
ID
_____
YLE1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
CHILD LOCK
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
YLE1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
 Lock more channels
 Repeat steps 3 and 4
SETTINGS
CHILD LOCK
(Analogue
channels)
3
FEATURES
USE
2


ON
TYPE A
 Cancel  Set the time to “0” in step 2
 Remaining time  You can confirm the remaining time at step 2, after repeating this process.
Select
 To the previous
screen
 Exit
SLEEP TIMER
CHILD LOCK
BLUE BACK
FAVORITE SETTING
APPEARANCE
PREPARE
3
2
FEATURES
IMPORTANT!
2
Display the menu
ENGLISH
1
(continued)
(blue)
 Release a channel  Press “ ” again in step 4
press “
step 2.)
” and enter your “ID NO.”. (If you forget your “ID NO.”, check it in
 BLUE BACK (Analogue channels): Display blue screen and mute the sound when the signal is weak
or absent (ON / OFF).
31
31-32
TROUBLE?
 View a locked channel  Use the numerical buttons to enter the channel number. When n appears,
32
2/9/2007 11:13:20 AM
Just the way
you like it
Customising your TV
Select a menu
PICTURE
SOUND
FEATURES
SET UP
DTV
1 select
select
PICTURE
STANDARD
COOL
SOUND
PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
Items

Backlight brightness (Darker  Brighter)
CONTRAST
Contrast (Lower  Higher)
BRIGHT-2
Brightness (Darker  Brighter)
SHARP
Sharpness (Softer  Sharper)
COLOUR
Colour (Lighter  Deeper)
HUE (NTSC only)
Tint (Reddish  Greenish)
COLOUR TEMP.
FEATURES
STEREO / t · u
BASS
Low tones (Weaker  Stronger)
TREBLE
High tones (Weaker  Stronger)
BALANCE
Speaker balance (Left Stronger  Right Stronger)
HYPER SOUND
3D CINEMA SOUND
1 adjust /
select
2 set
 When adjusting
Move
1 adjust
2 set
1 select
STANDARD
STANDARD
SLEEP TIMER
CHILD LOCK
Stops children from watching specific channels (P. 31)
BLUE BACK
(ON / OFF)
2 set
COOL
Sub-menu
APPEARANCE
(TYPE A / TYPE B)
AUTO PROGRAM
Select a country, it automatically registers channels (P. 13, ⁄)
EDIT / MANUAL
LANGUAGE
Select a language for on-screen menus (P. 13, !)
DECODER (EXT-2)
EXT SETTING
HDMI SETTING
ATTENUATOR
For when digital channels are not received because of too strong radio waves
(ON / OFF)
 Other settings · Change the aspect ratio  “ZOOM” (P. 30)
· Turn on “3D CINEMA SOUND”  “3D CINEMA SOUND” (P. 30)
33
33-34
TROUBLE?
 Some items have a
sub-menu.
STANDARD
PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
SET UP
 When selecting
from presets
PICTURE
SETTINGS
after one minute of
inactivity.
 Some functions may
not be displayed on
menu depending on the
situation.
BRIGHT-1
USE
4
Adjust / Configure
FEATURES

PICTURE MODE
PREPARE
Select an item
 To the previous
screen
 Exit
IMPORTANT!
 DTV menu is available only when
watching digital channels  (P. 35)
2 next
3
Item
MENU
PICTURE
2
Menu
ENGLISH
1
Display the menu
34
2/9/2007 11:13:22 AM
Using DTV menu
Digital channels original function and setting can be selected from the DTV menu.
Item
Timer
Reserve a programme to record / watch (P. 27)
Edit / Delete / Lock registered digital channels or add them to favourites.
(P. 45)
Edit PR
1 select
MENU
2 next
4
Select “Setup”
1 select
DTV Menu
Timer
Edit PR
Select the country of installation (P. 39)
Time Zone
Select the time zone when the clock is off time
 “Set the clock to the right time” (P.55)
Menu Language
Select a language for on-screen menus (P. 39)
Audio Language
Select the default language for audio (P. 39)
Subtitle Language
Select the default language for subtitle (P. 39)
Teletext Language
Select the default language for teletext (P. 39)
EPG Language
Select the default language for programme name and programme
information (P.39)
Enter PIN Code
Change PIN code (P. 39)
Favourite Mode
Enable your favourite channels (P. 39)
Maturity Rating
Restrict programmes according to the age (P. 39)
Digital Audio Output
When the Dolby Digital signal is received, you can select to output the
signal from the DIGITAL AUDIO OUTPUT terminal. (P. 41)
Banner Duration
Select the display time for channel information (2 sec / 5 sec / 8 sec)
Receiver Upgrade
Upgrade your tuner software as newer versions becomes available. (P. 41)
Common Interface
Set Conditional Access Module (P. 41)
Antenna Power
Power supply for the indoor aerial (P. 41)
Service Scan
Register channels (P. 43)
Signal Check
Check the broadcast signal (P. 43)
Factory Settings
Initialise the DTV settings (P. 43)
PREPARE
DTV
PICTURE
SOUND
FEATURES
SET UP
DTV
Configuration
3
Select “DTV”
Country
IMPORTANT!
2
Display the menu
ENGLISH
1
Menu
Configuration
Setup
Installation
5
Setup
14:00
05/05/2006
PCM
Banner Duration
2 sec
Receiver Upgrade
Auto
Common Interface
No CI Module
Antenna Power
select
Off

E.g. “Antenna Power”
Antenna Power
35
35-36
Off
When entering the PIN code
When watching digital channels or changing DTV menu settings, it may be necessary for you to
enter a PIN code.
Once a PIN code has been entered, there is no need to enter it again until the TV is turned off.
 The default PIN code is “0000”.
 You can set your own PIN code.  “Enter PIN Code” (P. 39)
TROUBLE?
7
Finish
select
SETTINGS
6
Change setting
Installation
 Exit
USE

Select an item
Setup
 To the previous
screen
2 next
36
2/9/2007 11:13:23 AM
PICTURE
SOUND
FEATURES
SET UP
DTV
 Exit

PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
Select an item
1 select
FEATURES
DIGITAL VNR
DigiPure
MOVIE THEATRE
COLOUR SYSTEM
4:3 AUTO ASPECT
For smooth
cinema film
MOVIE THEATRE
2 next
COLOUR SYSTEM
Change settings
1 select
FEATURES
DIGITAL VNR
D igiPure
MOVIE THEATRE
COLOUR SYSTEM
4:3 AUTO ASPECT
AUTO
: Automatically
adjusts
OFF
ON
AUTO
OFF
ON
AUTO
PAL
When there is
no colour
2 set
SECAM
NTSC 3.58
: Eastern Europe : USA
/ France
3.58 MHz
NTSC 4.43
: USA
4.43 MHz
AUTO
: When watching
videos, etc.
PANORAMIC
REGULAR
14:9 ZOOM
Select a default aspect ratio for Auto in
“ZOOM” (P.54)
PANORAMIC
REGULAR
14:9 ZOOM
16 : 9
4:3
14 : 9
TROUBLE?
· Reduce noise / Watch a more natural picture, etc.
4:3 AUTO ASPECT
SETTINGS
PAL
: Western
Europe
Finish
4:3 AUTO ASPECT
37-38
ON
: Function is
always on
COOL
Set a default
aspect ratio
37
OFF
: Function is
turned off
STANDARD
6
AUTO
DigiPure
COLOUR SYSTEM
after one minute of
inactivity.
ON
:When the picture
loses sharpness
1 select
PICTURE
5
OFF
: Function is
turned off
USE

ON
For
natural-looking
outlines
PREPARE
 To the previous
screen
ON
: When noise
appears
1 select
MENU
2 next
4
OFF
: Function is
turned off
DIGITAL VNR
2 next
3
ON
IMPORTANT!
2
To reduce noise
ENGLISH
1
Display the menu
38
2/9/2007 11:13:26 AM
DTV configuration
1
Select “DTV”
1 select
MENU
PICTURE
SOUND
FEATURES
SET UP
DTV
2 next
4
Select “Configuration”
Menu
Language
Select a language for on-screen menus
Audio
Language
Select a default language for audio*1
Subtitle
Language
Select a default language for subtitle*1
Teletext
Language
Select a default language for
teletext*1
English
EPG
Language
Select the default language for programme
name and programme information*1
English
Timer
Configuration
Country
Edit PR
English
Setup
Audio Language
Installation
Subtitle Language
Finnish
Finnish
Teletext Language
Finnish
EPG Language
Finnish
Select an item
Configuration
14:00
Country
05/05/2006
Finland
select
Change PIN
code
Enter PIN Code
Time Zone
Menu Language
Enter PIN Code
Favourite Mode
Finnish
Finnish
Finnish
Finnish
2 next
Menu Language
Finnish
Audio Language
Finnish
Confirmation Teletext Language
Finnish
Enter PIN Code
Finnish
Enter PIN Code
Finnish
Finnish
EPG Language
EPG Language
Finnish
EPG Language
Finnish
Enter PIN Code
Finnish
Swedish
 For visually
impaired

Swedish
 For hearing
impaired

Français
English
Finnish
English
Swedish
Finnish
Swedish
Menu Language
Audio Language
This function
is locked.
Teletext
Language
Please enter PIN code
Enter PIN Code
English
Finnish
Finnish
Finnish
Finnish
Menu Language
Audio Language
Teletext
Language
PIN code
changed
Enter PIN Code
OK
EPG Language
Finnish
Finnish
Suomi
Finnish
Suomi
Finnish
Finnish
Enter PIN Code
Enter PIN Code
Enable your
favourite
channels
1 Select “Favourite Mode”
Configuration
14:00
Country
05/05/2006
Finland
Time Zone
Menu Language
English
Audio Language
Finnish
Subtitle Language
Finnish
Teletext Language
Finnish
EPG Language
Finnish
2 Select “On”
1 select
2 set
Off
Maturity Rating
Note
*1 The languages will differ depending on the Country setting.
(The illustrations are for Finland)
*2 The maturity rating may differ depending on the Country
setting.
(The illustrations are for Finland)
Set the
viewing age
limit
Maturity Rating
1 Select “Maturity Rating”
Configuration
14:00
Country
05/05/2006
Finland
2 Select age*2
1 select
Time Zone
Menu Language
Audio Language
Subtitle Language
English
Finnish
Finnish
Teletext Language
Finnish
EPG Language
Finnish
Enter PIN Code
Favourite Mode
Maturity Rating
Off
2 next
Country
Maturity Rating
Menu Language
None
Audio Language
4
Age 4
5
Age 5 Subtitle Language
6
Age 6 Teletext Language
7
Age 7
8
Age 8 Enter PIN Code
9
Age 9 Favorite Mode
10
Age 10 Maturity Rating
11
Age 11
12
Age 12
F
E
F
F
F
F
1 select  Only programmes with
a maturity rating can
be restricted.
 To watch the restricted
2 set
programme, the PIN
code must be entered.
 Time Zone: Select the time zone when the clock is off time  “Set the clock to the right time” (P.55)
TROUBLE?
When not broadcast in the default language, on-screen
displays and audio output in that language are not
available. In this case, the language that can be displayed
and heard depends on the broadcast.
On
 If you cannot select “On”, register channels in “Favourites”
first  “Favourites” (P. 45)
Enter PIN Code
Favourite Mode
1 select
SETTINGS
6
Finish
Favourite Mode
39-40
Deutsch
Maturity Rating

39
Svenska
Finnish
Subtitle Language
Off
Suomi
Català
 Default is “0000”.
 “When entering the PIN code” (P. 36)
 If you forget the code Input “0081”
Teletext Language
Favourite Mode
English
Enter PIN Code
Finnish
Enter PIN Code
 Exit
Menu Language
Audio Language
France
Castellano
EPG Language
3 Input a new code twice
Enter new PINTeletext
code Language
Sweden
2 Input the current code
1 select
Maturity Rating
English
Audio Language
Off
Spain
USE
5
Finland
Menu Language
2 next

05/05/2006
Time Zone
Configuration
 To the previous
screen
14:00
Germany
Finnish
1 Select “Enter PIN Code”
1 select
DTV Menu
Finland
PREPARE
3
Display the menu
Country
IMPORTANT!
2
ENGLISH
Available for favourite channel selection, changing PIN code, and selecting
maturity rating, etc.
40
2/9/2007 11:13:31 AM
DTV setup
3
Select “DTV”
Dolby Digital
: The Dolby Digital
signal is output
 Only when the Dolby Digital signal is received
 Please read ““Dolby Digital” output from the “DIGITAL AUDIO OUT” terminal” (P. 56) before setting.
You can upgrade the tuner software as newer versions become available. Normally set to “Auto”.
Auto
Auto
: Automatically download and
install software upgrades
Manual
: Manually download and
 This occurs at midnight when
the TV’s power is off.
 When you change the setting,
enter PIN code.
 When JVC or the broadcasting station informs you of the new software, download it as follows.
1 select
MENU
Upgrade
tuner
PICTURE
SOUND
FEATURES
SET UP
DTV
2 next
4
PCM
: The Linear PCM
signal is output
PCM
1 Select “Manual”
2 Select “Search for new”
1 select
Software Version
2.14.03
Manual
2 next
 If upgrading is not necessary,
select “OK” to finish.
 Enter PIN code if needed.
Select “Setup”
3 Select “Yes”
1 select
DTV Menu
Timer
New software found.
Would you like to upgrade now?
Edit PR
Configuration
Yes
In standby
1 select
Downloading new software
Cancel
No
Setup

5
Setup
14:00
PCM
Banner Duration
2 sec
Receiver Upgrade
Auto
Common Interface
No CI Module
Antenna Power
 Exit

 If the TV has upgrade to the latest tuner software, the message “Search completed. No new software found” will appear.
 Select “In standby” instead of “Yes” if you want to upgrade the software automatically when the TV is turned off.
select
To watch pay-TV digital channels, use the Conditional Access Module menu.
This function can only be used when pay-TV can be received in your region.
Off
Set
Conditional
Access
Module
Common Interface
No CI Module
No CI Module
: Function is not
available
1 Press “OK” button to display the
Conditional Access Module menu
 When the Conditional Access Module etc. is
inserted after subscribing to the broadcasting
company, this function is available.
 “Watch pay-TV digital channels” (P. 8)
2 Follow the instructions on the
screen to set up pay-TV
 The content of the menu is different depending on the broadcasting company.
 For details, consult your broadcasting company
 The language shown in the menu may differ to the “Language” set for the TV.
Antenna Power
Off
Off
: Power not
supplied
On
: Power supplied
 Please read “Power supply for the indoor aerial” (P. 55) before setting.
 Banner Duration: Select the display time for channel information (2 sec / 5 sec / 8 sec).
41
41-42
TROUBLE?
Power supply
for the indoor
aerial
SETTINGS
6
Finish
05/05/2006
“Software upgraded
successfully! TV will
now reset!”.
USE
2 next
Select an item
2 start
2 next
Installation
 To the previous
screen
Search for new
OK
Receiver Upgrade
1 select
PREPARE
2
Display the menu
Output the
Dolby Digital
signal
IMPORTANT!
1
ENGLISH
Available for setting power supply for the aerial, and upgrading the tuner
software, etc.
42
2/9/2007 11:13:36 AM
DTV installation
1
Start Channel
Display the menu
Register a
new channel
Service Scan
Select “DTV”
MENU
Stop Channel
Specify a scanning channel range
(For “Manual”)
Mode
Add : Add a new channel to the registered channel
Reinstall : Register all channels again
1 select
Service Scan
Scan
Start Channel
Automatic
__
Stop Channel
__
Mode
Add
4
DTV Menu
Stop Channel
Automatic
__
__
Add
Select broadcasting stations from a list
1 select
Network Name
Yes
Digita Finland
No
2registered / cancel
2 set
registered
1 select
3 set
Timer
Edit PR
Signal Check
14:00
Select an item
1 select
Installation
Check the
broadcast
signal
Service
YLE TV1
YLE TV2
YLE FST
Channel
05/05/2006
33
Signal : Excellent
 This channel is the frequency of the digital
broadcasting. It differs from the channel number
select
displayed in the TV.
 Select another broadcast channel 
Signal Quality
Signal Strength
Signal Check
Signal level
Signal : Excellent
Service Scan
Poor
Signal Check
Acceptable
2 next
Finish
All registered digital channels are deleted and the DTV menu settings are initialised. Digital channels are
reregistered.
1 Enter PIN code
This function is locked.
Initialise the
DTV settings
Factory Settings
SETTINGS
6
 Default is “0000”.
1 select
Ÿ in “Initial settings” (P. 12)
Are you sure you want to delete the PR list and
reset all settings?
Yes
No
2 next
TROUBLE?
2 Select “Yes”
43-44
Excellent
Factory Settings

43
USE
2 next
 Exit
05/05/2006
 For “Network”
1 select
Scan completed! Store services?
Installation
5
Start Channel
Start Scan
Setup

Scan
Doku/KiKa
Info/3sat
ZDF
Mode
3 Select “Yes”
Configuration
 To the previous
screen
14:00
Service
VHF33:3 Services found
2 next
Select “Installation”
2 change
2 Select “Start Scan”
Start Scan
PICTURE
SOUND
FEATURES
SET UP
DTV
1 select an item
PREPARE
3
Automatic : Scan automatically
Manual : Scan a specified channel range
Network : You can select and register only necessary networks.
Scan
IMPORTANT!
2
1 Set items
ENGLISH
Available for registration of digital channels, checking of digital channels signal,
and initialisation of all digital channels settings.
44
2/9/2007 11:13:38 AM
Editing digital channels
Edit the channels registered with “Automatic” in “Initial settings” (P. 12).
1 select
2. YLE TV2
3. MTV3
3. MTV3
Name
4. Nelonen
4. Nelonen
YLE TV1
5. YLE FST
5. YLE FST
Edit a
channel name
Name
Display the menu
6. Subtv
6. Subtv
7. Urheilukanava
8. YLE24
Name
Number
Lock
Delete
Favourites
2 next
7. Urheilukanava
Number
14:00 05/05/2006
TV
1. YLE TV1
14:00 05/05/2006
TV
1. ABCDEFG
Edit PR List
2. YLE TV2
2. YLE TV2
3. MTV3
3. MTV3
4. Nelonen
5. YLE FST
6. Subtv
6. Subtv
7. Urheilukanava
7. Urheilukanava
8. YLE24
8. YLE24
Name
PICTURE
SOUND
FEATURES
SET UP
DTV
Name
Favourites
Edit a
channel
number
Number
Lock
Delete
Favourites
2 Change the number
1 Select “Number”
Number
Select “Edit PR”
Lock
Delete
3 Select “OK”
TV
1. YLE TV1
14:00 05/05/2006
TV
1. YLE TV1
2. YLE TV2
2. YLE TV2
2. YLE TV2
3. MTV3
3. MTV3
3. MTV3
Edit PR List
2 next
4
Number
14:00
05/05/2006
TV
1. YLE TV1
1 select
Edit PR List
14:00
05/05/2006
Edit PR List
5. YLE FST
Number
PR0exists!
Move it?
01
5. YLE FST
OK
6. Subtv
6. Subtv
7. Urheilukanava
7. Urheilukanava
8. YLE24
Name
4. Nelonen
4. Nelonen
001
5. YLE FST
Delete
Lock
Favourites
2 next
Name
Number
Cancel
8. YLE24
Lock
Delete
6. Subtv
7. Urheilukanava
8. YLE24
Name
Favourites
Number
Delete
Lock
Favourites
2 move
 Only when the same channel
number exists.
 The channels are rearranged in
numerical order.
1 select
DTV Menu
1 select
Number
4. Nelonen
PREPARE
3
Favourites
3 Set
Edit PR List
1 select
Lock
Delete
4. Nelonen
ABCDEFG
5. YLE FST
MENU
2 move position
8. YLE24
Name
Name
Select “DTV”
1 select character
14:00 05/05/2006
TV
1. YLE TV1
Edit PR List
2. YLE TV2
IMPORTANT!
2
2 Change the name
14:00 05/05/2006
TV
1. YLE TV1
Edit PR List
ENGLISH
1
Switch to digital
channels
1 Select “Name”
Timer
Edit PR
Configuration
1 Select “Delete”
Setup
Installation
 To the previous
screen

5
Select a channel
Edit PR List
14:00
TV
1. YLE TV1
05/05/2006
select
Delete
a channel
14:00 05/05/2006
TV
1. YLE TV1
Edit PR List
Edit PR List
14:00
TV
1. YLE TV1
4. Nelonen
5. YLE FST
6. Subtv
7. Urheilukanava
8. YLE24
2. YLE TV2
Number
Delete
Lock
1 select
3. MTV3
The selected PR will
be permanently
4. Nelonen
deleted. Do you want to proceed?
5. YLE FST
Yes
No
6. Subtv
3. MTV3
Name
05/05/2006
2. YLE TV2
2. YLE TV2
Delete
3. MTV3
2 Select “Yes”
1 select
USE
2 next
Favourites
2 next
7. Urheilukanava
2 delete
8. YLE24
Name
Number
Lock
Delete
Favourites
4. Nelonen
5. YLE FST
6. Subtv
 Exit
7. Urheilukanava
1 Select “Lock”
8. YLE24
Name

7
Edit
Delete
Lock
Favourites
Stop Children
from watching
specific
channels
Lock
Finish
2 Lock
14:00 05/05/2006
TV
1. YLE TV1
Edit PR List
select
Edit PR List
14:00
TV
1. YLE TV1
2. YLE TV2
2. YLE TV2
3. MTV3
3. MTV3
4. Nelonen
4. Nelonen
5. YLE FST
5. YLE FST
6. Subtv
6. Subtv
7. Urheilukanava
7. Urheilukanava
8. YLE24
Name
Number
Delete
8. YLE24
Lock
Favourites
Number
Name
Delete
Lock
Favourites
 Enter PIN code if needed
1 Select “Favourites”
Favourites
14:00 05/05/2006
TV
1. YLE TV1
Edit PR List
1 select
Edit PR List
TV
1. YLE TV1
2. YLE TV2
2. YLE TV2
3. MTV3
3. MTV3
4. Nelonen
4. Nelonen
5. YLE FST
5. YLE FST
6. Subtv
6. Subtv
2 set
7. Urheilukanava
8. YLE24
Name
Number
Delete
Lock
Favourites
Favourite icon
7. Urheilukanava
8. YLE24
Name
Number
Delete
Lock
Favourites
 To release, press “OK” button
again.
45-46
 To move through only your
favourite channels and have
them appear in the PR list.
 “Favourite Mode” (P. 39)
TROUBLE?
Register your
favourite
channel
45
 To release, press “OK”
button again.
 To enable “Lock”
function, turns the TV off
Lock icon
and on again.
 To watch the locked
channels, the PIN code
must be entered.
SETTINGS
6
Number
46
2/9/2007 11:13:46 AM
Editing analogue channels
2
Display the menu
3
Select “SET UP”
MOVE
1 Begin
3 Finish
EDIT
move out
1 Begin
ID
_____
YLE1
PR
AV
01
02
03
04
05
06
07
08
09
CH
CH
CH
CH
CH
CC
CC
CC
CC
04
05
06
01
02
03
04
1 select
MENU
PICTURE
SOUND
FEATURES
SET UP
ID
_____
YLE1
Edit a
channel
name
A
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
HDMI SETTING
ATTENUATOR
PR
AV
01
02
03
04
05
06
07
08
09
1 select
ON
1 Begin
2 next
 To the previous
screen

 Exit

PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
YLE1
select
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
02
03
04
ID
_____
YLE1
PR
AV
01
02
03
04
05
06
07
08
09
(green)
INSERT
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
-02
03
Delete a
channel
Confirm settings
(yellow)
T-V LINK
 When using
“T-V LINK”
2 set
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
YLE1
J VC
CH/CC
1 enter
CH
CH
CH
CH
CH
CC
CC
CC
CC
2 next
column
3 set
02
03
04
05
06
01
02
03
04
3 Enter a number
select
 Receives the
broadcast signal.
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
YLE1
CH/CC
CH
CH
CH
CH
CH
CC
CC
CC
CC
02
03
04
05
06
01
12
02
03
ID
_____
PR
AV
01
02
03
04
05
06
07
CH/CC
CH
CH
CH
CH
CC
CC
CC
03
04
05
06
01
02
03
2 Beginning channel search From high
Register a
new channel
MANUAL
3 Set
PR
10
11
12
13
14
15
16
17
18
19
From low
frequencies frequencies
ID
_____
_____
_____
_____
_____
_____
CH/CC
CC 05
CH 02 (B/G)
(red)
(green)
or
 If necessary, press 3
to change the broadcasting system.
 “Receivable broadcast systems
(Analogue channels)” (P. 54)
EDIT
PR
10
11
12
13
14
15
16
17
18
19
ID
_____
_____
_____
_____
_____
_____
CH/CC
CC 05
CH 08
MANUAL
PR
10
11
12
13
14
15
16
17
18
19
ID
_____
_____
_____
_____
_____
_____
CH/CC
CC 05
CH 03 (B/G)
 Adjust
MANUAL
PR
10
11
12
13
14
15
16
17
18
19
ID
_____
_____
_____
_____
_____
_____
 Auto-search begins,
and the nearest
 Repeat the previous
steps until the
desired channel is
displayed
CH/CC
CC 05
CH 08 (D/K)
 Picture fine tuning 
(yellow)(blue)
/
 Sound fine tuning 
select a system
TROUBLE?
47-48
(blue)
RECORDING DEVICE
 Is a “T-V LINK”
 When not using
compatible device
“T-V LINK”
 “T-V LINK”  (P. 11)
47
1 select
EDIT
DELETE
1 Begin
DOWNLOAD TV
ID LIST
M6
MBC
MCM
MDR
MOVIE
MTV
MTV3
1 Delete
MANUAL
8
02
03
04
05
06
01
02
03
04
 “CH/CC” List  (P. 53)
Edit
Finish
CH
CH
CH
CH
CH
CC
CC
CC
CC
SETTINGS
6
7
EDIT
M
CH/CC
USE
5
Select a row
2 Select a “CH/CC”
EDIT
Insert a
channel
ID
_____
YLE1
EDIT
next
column
OFF
move in
PREPARE
SET UP
02
03
05
06
04
01
02
03
04
EDIT
2 next
4
CH
CH
CH
CH
CH
CC
CC
CC
CC
 When manually naming a channel
ID
Select “EDIT/MANUAL”
CH/CC
 When selecting a preset name from the “ID LIST”
enter
the first (blue)
character
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
YLE1
PR
AV
01
02
03
04
05
06
07
08
09
02
03
(red)
EDIT
select
CH/CC
IMPORTANT!
1
Move a
channel’s
position
ENGLISH
When coming from “Initial settings” (P. 13), skip to @.
48
2/9/2007 11:13:55 AM
When you
have trouble
Troubleshooting
Problem
Actions
page
Severe noise or
snow
Not displayed
(black screen)
 Is the power cord connected to the AC outlet
correctly?
49
49-50
Digital channel screen
is frozen
 Hold down “ ” and “
” on the TV simultaneously for
three or more seconds to restart.
–
Some functions does
not display on menu
 It is not a malfunction. Some functions in the menu will not be
displayed depending on the situation.
–
unintentionally
 Press “
34
38
 Unnatural colour >>> Adjust “COLOUR” and “BRIGHT”.
Check your “COLOUR SYSTEM”
 Noise >>> Set to the following functions.
DIGITAL VNR :
ON
DigiPure :
OFF
 Dull picture >>> Set to the following functions.
DIGITAL VNR :
OFF
DigiPure :
ON
26
Strange picture
device
 If you connected S-Video output device, check the “S-IN”
setting.
 If the top of the image is distorted, check the video signal
quality itself.
 If movement appears unnatural when receiving a signal
from a DVD player, etc. with 625p (progressive-scanning),
change the output setting of the external device to 625i
(interlace-scanning).
Poor sound
 Adjust the “BASS” and “TREBLE”.
 If receiving a poor signal in “STEREO / t·u”, switch to “MONO”.
34
34
30
34
38
38
34
38
38
–
TROUBLE?
 Digital channels  (P. 14)
 Are the batteries flat?
 Are you more than 7 meters away
from the TV?
 Is the “VCR/TV/DVD SWITCH” set to “TV”?
 When viewing teletext, the TV menu does not appear.
 Depending on the stability of the signal, there may be a time
lag when changing channels.
Sound
 Are you receiving interference
from signals reflected off
 Adjust the direction of your
The remote
control doesn’t
work!
–
SETTINGS
 Unplug TV, several minutes later plug it in again.
Picture
Ghosting
Remote control
stops working
USE
 Is the aerial receiving interference
 Are connected devices too close
to the TV?
 Insert the minimum distance
interference
Screen
–
PREPARE
Patterns, stripes
or noise
14
IMPORTANT!
Basics
 Is the TV connected correctly to
the aerial?
 Change the direction of the aerial.
 Is the aerial or its cable
damaged?
49
 Is the analogue channel reception poor, too?
 Following the instructions in “Severe noise or snow”
can solve this problem.
 Digital channels are not displayed
 When the TV cannot find the digital channels
 There may be problems at the aerial, radio waves,
or the area you live in, where reception is bad.
Consult your retailer.
ENGLISH
 Analogue channels
50
2/9/2007 11:13:57 AM
Troubleshooting
Problem
 Use the cable marked with HDMI logo.
work
 It is not a malfunction. Some functions in the menu do not
–
 Some digital channels cannot be watched on this TV.
55
56
“Dolby Digital selected!
No analogue audio
available”
When “Dolby Digital” is selected in “Digital Audio Output”, the
sound of a programme containing “Dolby Digital” signals cannot
be output from the TV or the audio system connected to the
“AUDIO OUT” terminal.
When the channel is changed, a message will be displayed for
a few seconds.
 To listen with the TV or audio system
 Select a language without “(Dolby)” from “Audio Selection”
 Switch “Digital Audio Output” to “PCM”
–
“NO RECORDING
POSSIBLE”
 The displayed video cannot be recorded.
–
29
41
Forgot my PIN code!
 The default PIN code is “0000”. If you forget the numbers that
you used to change the default PIN code, first input “0081” in
the “Enter PIN code” and then register a new PIN code.
39
Locked channels can
be watched without
inputting PIN code
 Once the PIN code is input, all the lock functions (“Lock” and
“Maturity Rating”) are released. If you want to use the lock
function again, turn the TV off and then turn it on again.
–
When JVC or the
broadcasting station
informs you of the
software
 Upgrade the tuner software by using the “Receiver Upgrade”
function.
41
When the clock is off
time
 Set the time zone  “Set the clock to the right time”
55
“Services have
changed. Do you want
to Update PR list?” is
diplayed
 Update the PR list (digital channels)  “Updating the PR list”
57
–
TROUBLE?
–
SETTINGS
Error message
 A problem occurs at the recorder.
 The recorder is recording another programme, or is playing.
–
USE
After confirming all the conditions above,
press “OK” button again.
DTV
54
54
–
“NO RECORDING”
“NO RECORDING
DEVICE BUSY”
 LCD panels use fine dots (“pixels”) to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light, or may light all
the time.
Please understand that this is not a malfunction.
PREPARE
Functions
–
 The recorder is not ready for recording.
Check the videotape or DVD disc.
Black or white dots
appear on the screen
–
34
 Wait a little for the signal to stabilize when switching the
“NO RECORDING
MEDIA PROBLEM”
page
–
Green and distorted
screen
 Is the “T-V LINK” compatible device connected to “EXT-2”?
 Is the SCART CABLE “Fully Wired”?
 Is the “T-V LINK” compatible device turned on?
Actions
IMPORTANT!
HDMI
 Check if the device is compliant with HDMI.
 Switch “AUDIO” in “HDMI SETTING” to “DIGITAL” or “AUTO”
34
Problem
ENGLISH
page
Screen
 Switch “SIZE” in “HDMI SETTING” to “1” or “2”.
“FEATURE NOT
AVAILABLE”
51-52
Actions
Wrong screen size
No sound
51
(continued)
52
2/9/2007 11:13:58 AM
“CH/CC” List
CC
Channel
CC 01/CC 201 S1
CC
Channel
CC 31/CC 231 S31
CH 03/CH 203
CH 04/CH 204
CH 05/CH 205
CH 06/CH 206
CH 07/CH 207
CH 08/CH 208
CH 09/CH 209
CH 10/CH 210
CH 11/CH 211
CH 12/CH 212
CH 21/CH 221
CH 22/CH 222
CH 23/CH 223
CH 24/CH 224
CH 25/CH 225
CH 26/CH 226
CH 27/CH 227
CH 28/CH 228
CH 29/CH 229
CH 30/CH 230
CH 31/CH 231
CH 32/CH 232
CH 33/CH 233
CH 34/CH 234
CH 35/CH 235
CH 36/CH 236
CH 37/CH 237
CH 38/CH 238
CH 39/CH 239
E3, ITALY A
E4, ITALY B, R2
E5, ITALY D, R6
E6, ITALY E, R7
E7, ITALY F, R8
E8, R9
E9, ITALY G
E10, ITALY H, R10
E11, ITALY H+1, R11
E12, ITALY H+2, R12
E21, R21
E22, R22
E23, R23
E24, R24
E25, R25
E26, R26
E27, R27
E28, R28
E29, R29
E30, R30
E31, R31
E32, R32
E33, R33
E34, R34
E35, R35
E36, R36
E37, R37
E38, R38
E39, R39
CH 41/CH 241
CH 42/CH 242
CH 43/CH 243
CH 44/CH 244
CH 45/CH 245
CH 46/CH 246
CH 47/CH 247
CH 48/CH 248
CH 49/CH 249
CH 50/CH 250
CH 51/CH 251
CH 52/CH 252
CH 53/CH 253
CH 54/CH 254
CH 55/CH 255
CH 56/CH 256
CH 57/CH 257
CH 58/CH 258
CH 59/CH 259
CH 60/CH 260
CH 61/CH 261
CH 62/CH 262
CH 63/CH 263
CH 64/CH 264
CH 65/CH 265
CH 66/CH 266
CH 67/CH 267
CH 68/CH 268
CH 69/CH 269
E41, R41
E42, R42
E43, R43
E44, R44
E45, R45
E46, R46
E47, R47
E48, R48
E49, R49
E50, R50
E51, R51
E52, R52
E53, R53
E54, R54
E55, R55
E56, R56
E57, R57
E58, R58
E59, R59
E60, R60
E61, R61
E62, R62
E63, R63
E64, R64
E65, R65
E66, R66
E67, R67
E68, R68
E69, R69
CC 02/CC 202
CC 03/CC 203
CC 04/CC 204
CC 05/CC 205
CC 06/CC 206
CC 07/CC 207
CC 08/CC 208
CC 09/CC 209
CC 10/CC 210
CC 11/CC 211
CC 12/CC 212
CC 13/CC 213
CC 14/CC 214
CC 15/CC 215
CC 16/CC 216
CC 17/CC 217
CC 18/CC 218
CC 19/CC 219
CC 20/CC 220
CC 21/CC 221
CC 22/CC 222
CC 23/CC 223
CC 24/CC 224
CC 25/CC 225
CC 26/CC 226
CC 27/CC 227
CC 28/CC 228
CC 29/CC 229
CC 30/CC 230
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
CC 32/CC 232
CC 33/CC 233
CC 34/CC 234
CC 35/CC 235
CC 36/CC 236
CC 37/CC 237
CC 38/CC 238
CC 39/CC 239
CC 40/CC 240
CC 41/CC 241
CC 75/CC 275
CC 76/CC 276
CC 77/CC 277
CC 78/CC 278
CC 79/CC 279
CH
CH 102
Channel
F2
CH
CH 141
Channel
F41
CC
CC 110
Frequency (MHz)
116-124
CC
CC 152
Frequency (MHz)
391-399
CH 103
CH 104
CH 105
CH 106
CH 107
CH 108
CH 109
CH 110
CH 121
CH 122
CH 123
CH 124
CH 125
CH 126
CH 127
CH 128
CH 129
CH 130
CH 131
CH 132
CH 133
CH 134
CH 135
CH 136
CH 137
CH 138
CH 139
CH 140
F3
F4
F5
F6
F7
F8
F9
F10
F21
F22
F23
F24
F25
F26
F27
F28
F29
F30
F31
F32
F33
F34
F35
F36
F37
F38
F39
F40
CH 142
CH 143
CH 144
CH 145
CH 146
CH 147
CH 148
CH 149
CH 150
CH 151
CH 152
CH 153
CH 154
CH 155
CH 156
CH 157
CH 158
CH 159
CH 160
CH 161
CH 162
CH 163
CH 164
CH 165
CH 166
CH 167
CH 168
CH 169
F42
F43
F44
F45
F46
F47
F48
F49
F50
F51
F52
F53
F54
F55
F56
F57
F58
F59
F60
F61
F62
F63
F64
F65
F66
F67
F68
F69
CC 111
CC 112
CC 113
CC 114
CC 115
CC 116
CC 123
CC 124
CC 125
CC 126
CC 127
CC 128
CC 129
CC 130
CC 131
CC 132
CC 133
CC 141
CC 142
CC 143
CC 144
CC 145
CC 146
CC 147
CC 148
CC 149
CC 150
CC 151
124-132
132-140
140-148
148-156
156-164
164-172
220-228
228-236
236-244
244-252
252-260
260-268
268-276
276-284
284-292
292-300
300-306
306-311
311-319
319-327
327-335
335-343
343-351
351-359
359-367
367-375
375-383
383-391
CC 153
CC 154
CC 155
CC 156
CC 157
CC 158
CC 159
CC 160
CC 161
399-407
407-415
415-423
423-431
431-439
439-447
447-455
455-463
463-469
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
X
Y, R3
Z, ITALY C, R4
Z+1, R5
Z+2
 Set “AUDIO” in “HDMI SETTING” to “ANALOGUE” or “AUTO”  (P. 34)
 EXT-5 input does not support analogue sound (EXT-3).
 EXT-5 input does not support DVI devices.
AUTO in “ZOOM”
PREPARE
received.
 The aspect ratio will turn to the ratio obtained from WSS (Wide Screen Identification Signal), video signal, or
ASPECT” (P. 38)
Receivable broadcast systems (Analogue channels)
USE
Depending on the country selected during “AUTO PROGRAM”, the receivable broadcast system differs.
 UNITED KINGDOM: Receive only PAL-I.
 FRANCE: Can receive SECAM-L.
To receive SECAM-L in countries other than France:
1) Change the “COUNTRY” to “FRANCE” in “AUTO PROGRAM”.
2) Press the “BACK” button to return to the menu and enter the channel using “INSERT” or “MANUAL”.
SETTINGS
TROUBLE?
53-54
CH
Channel
CH 40/CH 240 E40, R40
IMPORTANT!
53
CH
Channel
CH 02/CH 202 E2, R1
By using T-V LINK :
 You can send the analogue channel information programmed on the TV to the “T-V LINK” compatible device,
so that both the TV and the external device have the same channel settings. When connecting a new external
device, channel information is loaded into it, allowing channel setup to be completed very quickly. For more
details, refer to the external device’s manual.
 You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the
 After timer-record setting, the TV will instruct the recorder to start and stop recording, via DIRECT REC.
ENGLISH
To use the INSERT function (P. 47), find the “CH/CC” number corresponding to the TV’s analogue channel
number from this table.
 When the Country setting is “France”, select a three-digit CH/CC number.
54
2/9/2007 11:13:58 AM
(continued)
 To change the setting after “Initial settings” is complete  “Antenna Power” (P. 41)
Digital channels that cannot be watched on this TV
Set the clock to the right time
Displayed clock time for digital channels is based on the information from the broadcast, and obtained by
calculating the time difference between your time zone and Greenwich Mean Time (GMT) according to the
“Country” setting in the “Configuration” menu. (“Time Zone” is set in “Auto”)
If there is a time difference within the same country, or the time information is not correct, the clock on the screen
is incorrect. To amend this, change the “Time Zone” setting.
 When listening with the TV speakers.
 When listening with an audio system that does not have a “Dolby Digital” decoder.
 When recording a programme.
 If a language with “(Dolby)” is selected when “(Dolby)” is displayed in the “Audio Selection” menu
(P. 29), the “Digital Audio Output” setting can be temporarily changed from “PCM” to “Dolby
Digital”.
 A message recommending you to change the “Digital Audio Output” setting to “Dolby Digital” is displayed for
a few seconds.
 If you want to record a “Dolby Digital” signal using timer-record (P. 27), change the “timer-record
setting” from “PCM / Analogue” to “Dolby Digital”. However, if the setting is changed to “Dolby
Digital”, you cannot record analogue sound with a recording device that is connected to the EXT-2
terminal.
 “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
USE
1 Display “Configration” menu (P. 39)
2 Select “Time Zone” and press the OK button
3 Select the nearest city or country from your resident and press the OK button
4 Press the MENU button
 Set “Digital Audio Output” to “PCM” in the following cases.
The sound of a channel broadcast with “Dolby Digital” signals cannot be heard even when “Dolby
Digital” is set.
PREPARE
If a digital channel service uses new formats (such as DVB-H or MPEG4, etc.), or MHP, it cannot be watched even
though the channel name appears.
If the channel is selected, the picture will not appear and audio cannot be heard.
 You can delete these channels by using the “Delete” in the “Edit PR”.
 “Editing digital channels” (P.45)
IMPORTANT!
“Dolby Digital” output from the “DIGITAL AUDIO OUT” terminal
Some digital channels are broadcasted with “Dolby Digital” signals.
In these cases, “Dolby Digital” signals can be output from the “DIGITAL AUDIO OUT” terminal.
1. Connect an audio system with a “Dolby Digital” decoder. (P. 10)
2. Change the “Digital Audio Output” setting from “PCM” to “Dolby Digital”. (P. 41)
 When changing the setting, the message “Dolby Digital selected! No analogue audio available.” may be
displayed for a few seconds.
 Each time the channel is changed to a channel that is broadcast with “Dolby Digital” signals, the message
“Dolby Digital selected! No analogue audio available.” may be displayed for a few seconds.
 Even if “Dolby Digital” is set, “linear PCM” signals will be output by a channel that is not broadcast with “Dolby
Digital” signals.
Set the audio system so that it is compatible with both “Dolby Digital” and “linear PCM”. (For details, refer to
the audio system instruction manual.)
 When you want to temporarily change the setting from “Dolby Digital” to “PCM”, change with the “Audio
Selection” menu (P. 29).
ENGLISH
Power supply for the indoor aerial
When using an indoor aerial which needs external power, set “Antenna Power” to “On” during “Initial settings” (P. 11).
The TV will supply DC 5V 50mA (max) from the aerial socket through the cable to the aerial.
 Supplying power to outdoor and indoor aerials which does not need external power, may cause damage to the
aerial. If you are uncertain whether the aerial needs external power, select “Off”.
 Connect the aerial directly to the TV. When a recording device is connected between the aerial and the TV,
power can not be supplied to the aerial.
 Power is supplied to the aerial only when the TV is on.
SETTINGS
TROUBLE?
55
55-56
56
2/9/2007 11:13:59 AM
(continued)
Specifications
Main unit
Updating the PR list (Digital channel only)
Services have changed.
Do you want to update PR list?
No
 To update the PR list
 To cancel the update
Select “No” and press the OK button.
 If you want to update the PR list later, select “No” and press the OK button. Next time you turn on the TV this
message will not be displayed but you can also update the PR list using “Service Scan” (P. 43).
Colour systems
TV broadcast : PAL, SECAM
External input : PAL, SECAM, NTSC 3.58/4.43MHz
LT-42DA8SU/ZU
 Digital : Finland / Spain E21-E69 (Frequency : 474 MHz-858 MHz),
Sweden / Germany E5-E12 / E21-E69 (Frequency : 177.5 MHz-858 MHz)
France F5-F10 / F21-F69 (Frequency : 178.75 MHz-858 MHz)
 Analogue :
E2-E12 / E21-E69, F2-F10 / F21-F69, IR A-IR J, ITALY A-H / H+1 / H+2,
R1-R12 / R21-R69, S1-S41, X / Y / Z / Z+1 / Z+2,
French cable channels (Frequency : 116-172 MHz / 220-469 MHz)
NICAM (I / B / G / D / K / L), A2 (B / G / D / K)
Digital : EBU TEXT
Teletext systems
Analogue : FLOF (Fastext), TOP, WST (standard system)
Power requirements
AC 220 V - 240 V, 50Hz
Audio output (Rated power output) 6 W + 6 W
10 W + 10 W
Speakers
Power consumption
116 W
125 W
170 W
214 W
[standby]
[1.6 W]
[1.6 W]
[1.6 W]
[1.2 W]
Screen size
80 cm
92 cm
[without stand]
672 x 519 x 230
[672 x 471 x 107]
800 x 591 x 230
[800 x 545 x 99]
919 x 651.7 x 230 1030 x 719.1 x 296
[919 x 603.7 x 108] [1030 x 672 x 108]
Weights
[without stand]
Accessories
11.6 kg
14.3 kg
[10.8 kg]
[13.5 kg]
105 cm
19.8 kg
[18.7 kg]
23.9 kg
[22.1 kg]
USE
 A Conditional Access Module for watching pay-TV digital channels can be installed (P.8).
 DC power can be supplied to the indoor aerial (P.55).
Terminal name
Input / Output
terminals
Terminal type
EXT-2
Euroconnector x 1
(SCART connector)
EXT-3
RCA connectors x 5
Input terminals
EXT-4 (HDMI 1)
EXT-5 (HDMI 2)
HDMI
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
DIGITAL
AUDIO OUT
OPTICAL connector x1
Digital audio
(48 kHz,16 bit
linear PCM /
Dolby Digital)
Headphone
Headphone
output
 We may change the design and specifications without notice.
57
57-58
TROUBLE?
Output
terminals
HDMI connector x 1
Signal type (IN)
Signal type (OUT) Notes
Composite video,
Analog RGB
TV out
AUDIO L / R
“T-V LINK”
Analog RGB
Dubbing out
compatible
AUDIO L / R
Composite video,
Analogue component
(576i (625i) / 480i (525i),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
SETTINGS
EXT-1
Euroconnector x 1
(SCART connector)
PREPARE
1. Select “Yes” and press the OK button.
2. “Service Scan” menu is displayed.
Run the service scan to update the PR list  ”Service Scan” (P. 43).
 If “Reinstall” is set in “Mode” of “Service Scan” menu, All PR list setting will reset and all the reservations for
“Record” and “Remind” will be cancelled. If you want to leave those settings and just add channels, set the
“Mode” of “Service Scan” menu to “Add” (P. 43).
 If “Add” is set in “Mode” of “Service Scan” menu, channels which the TV couldn’t receive will not be deleted from
the PR list. To delete those channels manually  ”Edit PR list” (P. 45).
 The service scan will take few minutes.
LT-26DA8SU/ZU LT-32DA8SU/ZU LT-37DA8SU/ZU
CCIR I / B / G / D / K / L (See “Technical information”, P. 54)
IMPORTANT!
Yes
Model
ENGLISH
The TV will run the reception test (for digital channel) at midnight (3AM) on a daily basis.
If the TV detects channels that became receivable or if the TV was not able to receive a certain channel, a
message about updating the PR list will be displayed when the TV is turned on.
 The reception test will only operate when the TV is in standby. It will not operate when the TV is turned on.
 If the TV does not detect any channels that needs to be updated, a message will not be displayed.
58
2/9/2007 11:13:59 AM
LT-42DA8BJ
LT-37DA8BJ
LT-32DA8BJ
LT-26DA8BJ
WIDE LCD PANEL TV
INSTRUCTIONS
For users in the UK :
If you have any problems setting up your
new TV, please call the
Helpline on 0870 330 5000.
For users in the Republic of Ireland :
If you have any problems setting up your
new TV, please call the
Helpline on 1890-582500.
Trade Mark of the DVB Digital Video Broadcasting
Project (1991 to 1996) Number : 4341, 4342, 4343, 4344
LT-42DA8BJ_EN.indb 1-2
0207KTH-CR-MU
LCT2206-002A-U
2/13/2007 4:50:29 PM
Dear Customer,
This apparatus is in conformance with the valid European directives and standards
regarding electromagnetic compatibility and electrical safety.
Postfach 10 05 52
61145 Friedberg
Germany
[European Union]
legislation.
Attention:
(Business users)
This symbol is only
Union.
equipment.
i
LT-42DA8BJ_EN.indb i-Sec1:i
2/13/2007 4:50:30 PM
beautiful images
Digital terrestrial broadcasting (DVB-T)
Digital channels
Analogue terrestrial broadcasting (VHF
/ UHF) and analogue cable TV
Analogue channels
Contents
DVB-T / VHF / UHF broadcasting
Warning ············································ 3
Video camera
VCR
Names of all the parts ······················ 5
Basic connections ···························· 7
Connecting external devices ············ 9
Initial settings ································· 11
DVD player
DVD recorder
Getting started
PREPARE
Game console
IMPORTANT!
First things first!
Digital camera
Audio components
Let’s try it out
USE
Enjoying your new TV! ··················· 15
Watching digital channels ·············· 17
Using EPG ····································· 19
Viewing teletext ······························ 21
Watching analogue channels ········· 23
Watching videos / DVDs ················ 25
Using timer-record·························· 27
Useful functions······························ 29
· Subtitle / Audio selection / Sleep timer /
Zoom, etc.
· Reduce noise / Watch a more natural
picture, etc.
DTV configuration ·························· 39
DTV setup ······································ 41
DTV installation ······························ 43
Editing digital channels ·················· 45
Editing analogue channels ············· 47
Troubleshooting ····························· 49
“CH/CC” List ··································· 53
Technical information ····················· 54
Specifications ································· 58
1
TROUBLE?
SETTINGS
Customising your TV ······················ 33
Using DTV menu ···························· 35
Advanced picture adjustment ········· 37
2
2/13/2007 4:50:30 PM
First things
first!
Warning
Follow this manual
regarding setup!
Do not allow the TV
to fall!
On disposal of the
TV!
the TV!
Connect only to a 220-240V, 50Hz AC
outlet.
Do not rest your elbows on, or allow
cause injuries.
Follow the instruction in
(P. i).
Placing liquids, naked
flames, cloths, paper,
etc. on the TV may
cause a fire.
The main power supply for this TV is
power plug.
Never try to repair
the TV yourself!
If the problem cannot be solved in
retailer.
Unplug the power cord and contact
your retailer.
Never cut or damage
the power cord!
It may cause a fatal
USE
If the AC plug is not the
If you have cut or damaged the power cord.
To prevent fire or electric
shock, never allow
Never listen to
headphones at high
volume!
“Technical information” (P. 54)
PREPARE
Place the TV as
possible!
moisture!
IMPORTANT!
the power plug!
It may damage your hearing.
To change the fuse in UK plugs
Consult a qualified technician.
See the included manual on mounting
procedures.
JVC assumes no responsibility for
For more details on installation, usage and safety Consult your retailer
3
Never dismantle the
rear panel!
It may cause an electric shock.
Never obstruct the
ventilation holes!
It may cause overheating or a fire.
Handle LCD panel
with care!
Use a soft, dry cloth when cleaning.
scratch the screen!
Do not touch the screen when carrying the
TV.
Do not carry the
TV on your own!
In order to prevent accidents,
TROUBLE?
The power buttons
on the remote control
and the TV unit cannot
arrangements for
bedridden people.)
SETTINGS
when going out!
4
2/13/2007 4:50:30 PM
Getting
started
Mute
Switch between “VCR / TV / DVD”
Volume
(P. 25)
Change channel
/ volume, turn on from
standby (P. 17)
(P. 17)
Switch digital /
analogue channels
Power lamp
To menu (P. 33)
Select and
confirm settings in menus
Change the
channel / page
To the previous screen
Volume
When watching digital channels
USE
Remote control
(RM-C1821)
The coloured buttons can perform different
functions according to the situation.
When viewing teletext
(Analogue channels) (P. 21)
For confirming
the TV works
PREPARE
View teletext (P. 21)
Check accessories
IMPORTANT!
Channel information
Power On / Off
ON: Lit (Green)
STANDBY: Unlit
REC: Lit
Power On / Off
Follow on-screen instructions.
View the electronic
programme guide (EPG) (P. 19)
Switch TV / RADIO (P. 17)
Other uses
COUNTRY
MORE
View subtitles (P. 29)
Audio select (P. 29)
Follow instructions
in on-screen guides.
When viewing teletext (P. 21)
SETTINGS
START
OK
When watching TV / Video
5
When operating a JVC VCR
or DVD (P. 25)
TROUBLE?
Turn on “3D CINEMA SOUND”
(P. 30)
6
2/13/2007 4:50:31 PM
Basic connections
Connect with other devices “Connecting external devices” (P. 9)
Connect the aerial
AERIAL
AERIAL
IMPORTANT!
EXT-1
EXT-2
PREPARE
USE
VCR / DVD recorder
After all the connections have been made, insert the plug into an AC outlet.
When using an aerial which needs external power “Power supply for the indoor aerial” (P. 55)
Connect the power cord only to a 220-240V, 50Hz
AC outlet.
Installation requirements
To avoid overheating, ensure the unit has ample
room.
When attaching the TV to the wall, use the
200mm
150mm 50mm
150mm
50mm
Subscribe to a broadcasting company beforehand. A Viewing
Card (B) will be sent by the broadcasting company after
subscribing to it. It may be necessary for you to purchase a
CAM (Conditional Access Module) (A) in addition to the Viewing
Card. Consult your broadcasting company or retailer.
1 Unplug the power cord
2 Insert “B” into “A”.
3 Insert “A”.
4 Plug the power cord, and turn the power on.
5 Perform necessary settings “Common Interface” (P. 41)
Pay-TV analogue channels cannot be watched.
7
A
B
TROUBLE?
Consult a qualified technician.
See the included manual on mounting procedures.
JVC assumes no responsibility for damage due to
improper mounting.
200mm × 200mm mount which conforms to VESA
standards.
SETTINGS
Watch pay-TV digital channels
Care when setting
Power requirements
After all the connections have been made, insert the plug into an AC outlet.
Connect “T-V LINK” compatible recording device to “EXT-2”.
“T-V LINK” “What is “T-V LINK”?” (P. 11)
When using an indoor aerial which needs external power, connect the aerial directly to the TV.
“Power supply for the indoor aerial” (P. 55)
8
2/13/2007 4:50:31 PM
Connect “DVI” devices (P. 54)
Output Input · Composite signal · Composite signal /
RGB
· Sound L / R
· Sound L / R
: signal direction
“T-V LINK” (P. 11)
videos
EXT-2 Dubbing
DVD player
(HDMI compatible)
EXT-5
(HDMI 2)
broadcast tuner
· T-V LINK
(HDMI compatible)
EXT-1
EXT-2
VCR / DVD recorder
(T-V LINK)
EXT-3 Watching DVDs
EXT-3
Output Headphone
Headphone
AERIAL
Switch input signal
“
Pr/Pb/Y,
Switch input signal “
(Component input)
Pr/Pb/Y,
V” (P.26)
(Composite input)
V” (P. 26)
EXT-4 Connecting
EXT-5 HDMI devices
Output USE
Not available.
Input · Composite signal
/ Component
signal (P. 58)
· Sound L / R
PREPARE
Use S-VIDEO “S-IN” (P. 26)
Select dubbing sources
“DUBBING” (P. 26)
Connect a decoder
“DECODER (EXT-2)” (P. 34)
IMPORTANT!
EXT-4
(HDMI 1)
Output Input · Composite signal · Composite signal /
· Sound L / R
RGB / S-VIDEO
· Sound L / R
Input · HDMI signal
(P. 58)
“HDMI SETTING” (P. 34)
EXT-5 input does not support
analogue sound.
(L)
SETTINGS
DIGITAL
AUDIO OUT
Amplifier
(Digital optical compatible)
DIGITAL
AUDIO OUT
(R)
Game consoles
Listening to the digital audio of digital
channels on external speakers
CI (Common Interface) slot
(“Watch pay-TV digital channels” P. 8)
9
DVD player
Video camera
The sound from analogue channels
and external devices cannot be
output.
““Dolby Digital” output from the
“DIGITAL AUDIO OUT” terminal”
(P. 56)
TROUBLE?
Output · Digital sound (P. 56)
10
2/13/2007 4:50:32 PM
Initial settings
Register digital / analogue channels on TV. These channels can be edited later.
(In this manual, digital terrestrial broadcasting is indicated as digital channels,
analogue terrestrial broadcasting and analogue cable TV as analogue channels.)
1
The remote control
doesn’t work
Begin
Shown only when powering on for the first time.
The power button on the unit can also be used.
If the “JVC” logo does not appear or if you
wish to make changes later
2
Confirm “United Kingdom” is set
3
Set the aerial power supply
Language for on-screen
displays when watching digital
channel including the DTV
menu.
First Time Installation > Language Setting
Step 1: Please choose language
Language
English
This TV can only receive
British digital channels.
First Time Installation > Country Setting
Step 2: Please choose country
Country
United Kingdom
1 select Only when using an aerial which
needs external power, select “On”.
“Power supply for the indoor
aerial” (P. 55)
2 next
Stop Channel
Mode
Antenna Power
On
Start Scan
Off
TV/DTV
Digital channel settings : “Configuration” (P. 39)
“Installation” (P. 43)
Analogue channel settings : “SET UP” (P. 34)
BACK
4
USE
Exit Confirm “English” is set
PREPARE
To the previous screen 1
IMPORTANT!
2
Confirm the mode is set to
“TV”.
Set digital channels
Scan digital channels
Service
Scan
Start Channel
Automatic
__
Stop Channel
__
Mode
Service
Scan
BBC ONE
BBC TWO
BBC THREE
Start Channel
Add
Automatic
__
Stop Channel
__
Mode
Add
Start Scan
Start Scan
UHF33 : 3 Services found
Analogue channels to be instantly
The “DIRECT REC” function to be
used.
11
Register digital channels
Teema
Teema
Teema
Stop Channel
Mode services?
Scan completed! Store
Yes
__
Add
Start Scan
No
If digital channels are not found, the following message will appear.
No services found!
OK
!
(Next page)
After completing following steps, read “When the TV cannot find the digital
channels” (P. 14) and try scanning digital channels again
TROUBLE?
“T-V LINK” variations
5
SETTINGS
12
2/13/2007 4:50:32 PM
Initial settings
3
(continued)
When change a language
Confirm the language
select
Language for
on-screen analogue
channel displays and
menus (excluding the
DTV menu)
LANGUAGE
When not using analogue channels Check the following points
Is the TV connected correctly to the aerial?
Change the direction of the indoor aerial.
Is there a digital channels transmission tower nearby?
Turn “ATTENUATOR” to “ON” (P. 34), since the radio waves are too strong.
@
⁄
Set analogue channels
Register digital channels again “Service Scan” (P. 43)
Register analogue channels
If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak. Consult your retailer
When change a country
COUNTRY
select
When the digital channel reception is poor
PREPARE
1
IMPORTANT!
When using analogue channels (or cable TV) 4
When the TV cannot find the digital channels
AUTO PROGRAM
(blue)
The “Missing or weak signal” message appears.
CH 21
0%
3
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
BBC1
BBC2
ITV
CH4
CH5
_____
CH
CH
CH
CH
CH
CH
21
22
23
24
25
CH
CH
CH
26
27
28
Set T-V LINK
Edit analogue channels
Confirm
When using “T-V LINK”
When not using
“T-V LINK”
@ in “Editing analogue
channels” (P. 47)
If digital channel reception is poor When the digital channel reception is poor (P. 14)
If analogue channel reception is poor Troubleshooting (P. 49)
Some digital channels cannot be watched on this TV. (P.55)
Set “ATTENUATOR” (P. 34) from this setting screen.
To set the “ATTENUATOR” on select “On”, to set it off select “Off”
This setting screen will appear during the “Factory Settings” (P. 43) with “ATTENUATOR” set to “ON”.
TROUBLE?
Edit digital channels Editing digital channels (P. 45)
When “RF Attenuator” setting screen is displayed
SETTINGS
Initial setting is complete
13
If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak. Consult your retailer
RECORDING DEVICE
If “FEATURE NOT
Is a “T-V LINK” compatible
Is the device turned on?
5
Is the TV connected correctly to the aerial?
Change the direction of the indoor aerial.
Is there a digital channels transmission tower nearby?
Turn “ATTENUATOR” to “ON” (P. 34), since the radio waves are too strong.
Check digital channels signal Signal Check (P. 43)
T-V LINK
DOWNLOAD TV
USE
2
14
2/13/2007 4:50:33 PM
Let’s try it out
PAGE
View channel information
Select a channel
Listen to the radio
PAGE
25
Watch high quality video (S-VIDEO)
Name connected devices
Dub videos
Display the current time
Using the PR list
PREPARE
17
Watching
23 analogue channels
Watching
videos / DVDs
IMPORTANT!
Watching
digital channels
PAGE
PAGE
33
USE
Adjust the picture
Adjust the sound
PAGE
21
Viewing teletext
PAGE
15
View the programme list
for 8 days
Search from a genre
Reserve a programme to
watch / record
Advanced settings
Basic settings
Setting digital channels
(timer-record / configuration / channel settings, etc.)
TROUBLE?
19
Using EPG
PICTURE
SOUND
FEATURES
SET UP
DTV
SETTINGS
Enlarge the text
Bookmark your favourite pages
Reveal hidden pages
MENU
16
2/13/2007 4:50:34 PM
Watching digital channels
Set to “TV”
1
Mute
Symbols Name of station
2
on the TV lights.
3
Now : 14:00 - 15:00
Next : 15:00 - 17:00
14:00
Channel
Clock
News
Golf
Programme
Domestic news
World news
Economic information
Sport news flash
Channel
information
(No indication)
CH33
More information
Symbols description
: Reception level
5
Select a channel
: TV programme
Yellow
Green
: Acceptable : Excellent
: Pay-TV channel
: Radio programme
: Subtitles are available (P. 29).
: More information about the programme is available.
: Teletext is available (P. 22).
t-u
: t : Audio in another language is not available.
u : Other audio languages are available (P. 29).
PREPARE
4
Switch TV / RADIO
Red
: Poor
IMPORTANT!
Press again to turn the screen off
Whenever
changing the
channel, “Channel
Information” is
displayed.
BBC ONE
1
Power on
Symbols
Dolby Digital : Dolby Digital signal is output from the “DIGITAL AUDIO OUT” terminal (P.56)
View subtitles / Select audio
language (P. 29)
The information displayed may differ from programme to programme.
Note
PR List
Channels registered in “Initial
settings” will appear here.
You can select only from your
favourite channels “Favourite
Mode” (P. 39)
PR List
1
2
3
4
5
6
7
8
9
10
Using PR list
1 select
BBC ONE
BBC TWO
ITV1
Channel 4
five
ITV2
BBC THREE
BBC FOUR
ITV3
SKY THREE
2 view
USE
Volume
“Services have changed” is displayed.
Updating PR list (P. 57)
To completely turn off the TV, unplug the AC plug.
Watch pay-TV digital channels (P. 8)
Add a new station (P. 43)
Some digital channels cannot be watched on this
TV. (P. 55)
EPG
Power on
2
Change
the channel
P
14:00 05/05/2006
2 select a channel
BBC ONE
14:00-15:00 News
05/05
06/05
07/05
08/05
09/05
10/05
11/05
12/05
Using EPG
1.
2.
3.
4.
5.
6.
7.
8.
9.
BBC ONE
BBC TWO
ITV1
Channel 4
five
ITV2
BBC THREE
BBC FOUR
ITV3
14:00 News
15:00 Golf
17:00 News
17:15 Music
18:00 Weather forecast
18:20 News
18:50 Soccer
20:20 News
1 select the channel column
3 view
Display only programmes which match your
selected genre “Genre” (P. 20)
Channels
P
The channels and programme names shown in the illustrations here
are examples only.
17
Using the
number buttons,
up / down buttons
Enter a channel number
E.g.
Move up or down a channel
up
1:
15 :
down
You can select only from your favourite
channels “Favourite Mode” (P. 39)
TROUBLE?
Volume
SETTINGS
1
18
2/13/2007 4:50:34 PM
Using EPG
(Electronic Programme Guide)
You can find a digital channel programme from an eight-day programme guide, check its
information, and make a reservation.
1
Display EPG
or
Genre
: TV
: Radio
14:00
05/05/2006
05/05
06/05
07/05
08/05
09/05
10/05
11/05
12/05
1.
2.
3.
4.
5.
6.
7.
8.
9.
Date
14:00 News
15:00 Golf
17:00 News
17:15 Music
18:20 News
18:50 Soccer
20:20 News
Channel
Select a genre
Display only
programmes
which
match your
selected
genre
Genre
3
1 select
(red)
3 search
Find a programme
2 search
Only one genre can be
selected.
Your selected genres are displayed
14:00
05/05/2006
BBC ONE
15:00-17:00 Golf
05/05
06/05
07/05
08/05
09/05
10/05
11/05
12/05
Programme
1.
2.
3.
4.
5.
6.
7.
8.
9.
BBC ONE
BBC TWO
ITV1
Channel 4
five
ITV2
BBC THREE
BBC FOUR
ITV3
15:00 Golf
18:50 Soccer
22:30 Tennis
Only programmes in the selected genre are displayed.
Genre icon
Quick search
2 set /
cancel
More than one genre can be selected.
Search from genre
Close EPG
1 select
Genre
All
General
Movie
News
Entertainment
Sports
Children
Education
Leisure
Drama
USE
Check programme
information
BBC ONE
BBC TWO
ITV1
Channel 4
five
ITV2
BBC THREE
BBC FOUR
ITV3
2
(green)
General
Children
Movie
Education
News
Leisure
Entertainment
Drama
1
Display “Timer”
2
3
Set “Timer”
PREPARE
BBC ONE
14:00-15:00 News
Display the genre List
IMPORTANT!
2
Switch TV / RADIO
1
Select the reserved programme beforehand.
(red)
Sports
Watch / listen to the programme (P. 18)
Reserve the programme
select a date / a channel / a programme
The channels and programme names shown in the illustrations here are examples only.
Timer
¤ in “Using timer-record” (P. 27)
Confirm the reservation
14:00
BBC ONE
14:00-15:00 News
05/05
06/05
07/05
08/05
09/05
10/05
11/05
12/05
1.
2.
3.
4.
5.
6.
7.
8.
9.
BBC ONE
BBC TWO
ITV1
Channel 4
five
ITV2
BBC THREE
BBC FOUR
ITV3
14:00 News
15:00 Golf
17:00 News
17:15 Music
18:20 News
18:50 Soccer
20:20 News
For more details about the timer-record setting
“Using timer-record” (P. 27)
19
(red) : Reserve to record
(blue) : Reserve to watch
: Reservation time is
shorter than the
broadcasting time
TROUBLE?
select a column
(date channel programme)
Reserve a
programme
to watch and
record
SETTINGS
3
Find a programme
20
2/13/2007 4:50:49 PM
Viewing teletext
1
Switch digital / analogue channels
When watching analogue
channels
2
Operate according to the screen
indications
When watching analogue channels
Enter a teletext page
Reveal
hidden pages
Release Press “ ” again
REVEAL
(Analogue
channels)
down
View
sub-pages
Move up or down a page
down
up
Release Press “ ” again
1
Display your
favourites list
Enlarge
the text
SIZE
(Analogue
channels)
(RED) (GREEN) (YELLOW) (BLUE)
To the
index page
LIST MODE
(Analogue
channels)
2
3
Save
Recall your favourite page Press the coloured button as in step 2
21
Switch briefly
from teletext
to TV
CANCEL
(Analogue
channels)
Useful when running a page search.
TROUBLE?
4
INDEX
(Analogue
channels)
SETTINGS
Bookmark
your favourite
page
USE
Sub-page
(Analogue
channels)
Display sub-pages
displayed text
PREPARE
Move up or down a page
up
HOLD
(Analogue
channels)
IMPORTANT!
TEXT
When watching digital channels
Hold the
current page
22
2/13/2007 4:50:50 PM
Watching analogue channels
Set to “TV”
1
Mute
Channel information
1
Power on
2
Time
(No indication)
12 : 00
BBC1
Channel
information and
clock
“Time” is displayed
only when teletext
broadcasting can be
received.
on the TV lights.
IMPORTANT!
Press again to turn the screen off
PR LIST
3
Using PR list
“STEREO / t·u” (P. 34)
_____
BBC1
BBC2
ITV
CH4
CH5
_____
Press a channel number
Using the
number buttons,
up / down buttons
15 :
USE
P
Press the number
to register it on
SET
1 - 4?
PROGRAMMED!
Disappears after
a few seconds
Recall the favourite channel
Press the
number you
registered
Register a
channel to a
button
FAVOURITE
CHANNEL
1
1
BBC1
FAVOURITE 1 - 4?
Check your favourite channels Press “
” and confirm that the channels
you have registered have a d beside them
Customisations
of a favourite
channel get saved
as well.
SETTINGS
2
Change
the channel
down
While the channel
is displayed
Power on
up
1:
Hold down
for 3 seconds
1
Move up or down a channel
E.g.
Note
To completely turn off the TV, unplug
the AC plug.
To watch analogue channels, you must
register them beforehand.
“AUTO PROGRAM” (P. 34)
Volume
(3 times)
2 view
PREPARE
Switch between mono / stereo /
ID
AV
01
02
03
04
05
06
07
08
09
Channels registered in “Initial settings” will appear here.
select
Select a page Select a channel
4
PR
Close PR LIST
1 select
PR LIST
Delete a favourite channel
select
FAVOURITE SETTING
Volume
P
23
(blue)
FAVOURITE SETTING
1
PR 01
1
PR 01
2
PR 03
2
PR 03
3
PR 05
3
4
PR 07
4
PR 07
TROUBLE?
“MENU” “FEATURES” “FAVOURITE SETTING”
24
2/13/2007 4:51:03 PM
1
0
1
2
3
4
5
6
AV
EXT-1
EXT-2
EXT-3
HDMI1
HDMI2
DTV
2 Set S-VIDEO input
1 select
EXT MODE
Switch
to S-VIDEO
input
2 watch
EXT SETTING
EXT SETTING
select
DUBBING
EXT-2
EXT-1
(yellow)
EXT-1
EXT-3
DUBBING
EXT-2
EXT-3
TV
TV
DTV
DTV
S-IN
Cancel this mode Press “ ” in 2 again
2
3
EXT SETTING
V
TV
TV
DTV
V
ID LIST
Some models of JVC devices cannot be operated with this remote control.
EXT SETTING
TV
TV
DTV
DTV
DUBBING
EXT-2
ID LIST
VHS
S-VHS
DVC
CAM
SAT
STB
GAME
DVD
DVR
EXT SETTING
EXT-1
DUBBING
EXT-2
ID LIST
1 select
EXT SETTING
EXT-1
DVD
DUBBING
EXT-2
EXT-3
TV
SETTINGS
VHS
S-VHS
DVC
CAM
SAT
STB
GAME
DVD
DVR
DTV
2 set
Clear the name Select the blank space in 3
Display the menu
MENU
1 select
PICTURE
SOUND
FEATURES
SET UP
DTV
1 select
SET UP
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
HDMI SETTING
ATTENUATOR
ON
OFF
2 next
Set up
dubbing on
EXT-2
DUBBING
1 Select the arrow
EXT SETTING
EXT-1
EXT-3
EXT SETTING
DUBBING
EXT-2
select
EXT-1
EXT-3
TV
TV
DTV
DTV
DUBBING
EXT-2
select
TROUBLE?
Select “SET UP”
2 next
EXT-1
EXT-3
TV
25
(blue)
select
DUBBING
EXT-2
DTV
2
EXT-3
EXT-3
Advanced functions
Pr/Pb/Y
(yellow)
USE
Edit names
of connected
devices
DUBBING
EXT-2
Return to composite input Press “ ” in 2 again
EXT SETTING
Stop / Pause
Operate the VCR (DVD)
EXT-1
EXT-3
DTV
EXT-1
1
(yellow)
To TV
EXT SETTING
select
DUBBING
EXT-2
EXT-1
EXT-3
Pr/Pb/Y
Turn on the device
PREPARE
1
DVD players
Switch
between
component
and
composite
input
IMPORTANT!
2
y
(yellow)
The device
selection
display will
change from
“E2” to “S2”.
26
2/13/2007 4:51:16 PM
Using timer-record
DTV original function and setting, such as a recorder-linked timer-record setting,
can be selected from the DTV menu.
1
1
Switch TV / RADIO
Switch to digital
channels
1 select
MENU
PICTURE
SOUND
FEATURES
SET UP
DTV
Reserve a
programme
to record
2
Set
Select “Timer”
3
2 next
6
Select an item
Timer
(red)
14:00 05/05/2006
Start
End
Date
Mode
Timer list empty
PR
1 select
1
Please select timer
Record
Remind
(green)
Select the reservation. Press “
press “OK” button.
”. Select “Yes” and
Change a reservation
Select the reservation and press “OK”.
(yellow)
Search a channel using EPG Press “ ”
Remind
PR
Start
Date
Mode
BBC ONE
17:15
05/05/2006
Once
Select the channel
A message will be displayed if there is problem with the reservation.
2
Set
TV programme
Radio programme
(blue)
PR
If the TV’s power is off at the
start time, nothing happens.
At the start time, the channel will
automatically change.
14:00 05/05/2006
Start
Mode
End
Date
1 : BBC ONE 17 : 15 - - - - - 05/05/2006 Once
If you reserved the programme using EPG, the screen will return to EPG instead.
Step 3 in “Timer” (P. 20)
TROUBLE?
27
Reserve a
programme to
watch
Input / confirm timer-record settings
SETTINGS
2 next
Up to 20 programmes can be
reserved.
Cancel a reservation
Prepare for recording
· Set the recording device to external input mode before the start time.
· Manually set the timer on “T-V LINK” incompatible devices. For details, refer to the device’s manual.
· Make sure that recording times on the recording device do not overlap with recording times on the TV.
· Some “T-V LINK” compatible DVD recorders may not work correctly.
When Rec Timer has been set, the power lamp on the TV will :
Start blinking 3 minutes before the start time (green or red)
Light during recording (green or orange)
USE
5
Set “Timer”
7
14:00 05/05/2006
Start
End
Date
Mode
1 : BBC ONE 17 : 15 18 : 00 05/05 /2006 Once
Timer
Installation
PR
At the start time, the channel will
automatically change and the
device connected to “EXT-2” will
begin recording the programme.
If you reserved the programme using EPG, the screen will return to EPG instead.
Step 3 in “Timer” (P. 20)
1 select
DTV Menu
Setup
Exit
Normally set to “PCM / Analogue” (PCM / Analogue, Dloby
Digital) (P. 56)
Set subtitle recording (Off / On)
Radio programme
(red)
Configuration
TV programme
Record
Edit PR
To the previous
screen
Select the channel
A message will be displayed if there is problem with the reservation.
When reserving a channel which is set to “Lock” (P.45), enter the PIN code
“When entering the PIN Code” (P. 36)
2 next
4
BBC ONE
17:15
18:00
05/05/2006
Once
PCM / Analogue
Off
PREPARE
3
Select “DTV”
PR
Start
End
Date
Mode
Audio
Subtitle
IMPORTANT!
2
Display the menu
Input / confirm timer-record settings
28
2/13/2007 4:51:18 PM
Useful functions
1 select
Subtitle Selection
ON
OFF
ON
OFF
ON
2 set
: Don’t display
: Display
3D CINEMA SOUND
View
subtitles
Adjust the ambience level
“MENU” “SOUND” “3D CINEMA SOUND”
3D CINEMA SOUND
SURROUND
BASS BOOST
MID
MID
2 select
Switch to another language
Subtitle Selection
1 select “ON”
OFF
ON
2 next
1 select
3 set
Enjoy
ambient
sound
3D CINEMA
SOUND
level
LOW
MID
HIGH
English
Emphasize the bass sound
Gaelic
Welsh
PREPARE
SUBTITLE
(Digital channels)
IMPORTANT!
By default, the language set in “Subtitle Language”
(P. 39) is automatically selected.
When not broadcast in that language, another
broadcast language is automatically selected.
When no subtitles are broadcasted, “No Subtitles” is
displayed.
ON
“MENU” “SOUND” “3D CINEMA SOUND”
2 set
3D CINEMA SOUND
: Special subtitles for the hearing impaired
Undefined : When the subtitle’s language cannot be
identified
SURROUND
BASS BOOST
MID
MID
2 select
level
LOW
By default, the language set in “Audio Language” (P. 39)
is automatically selected.
When not broadcast in that language, another broadcast
language is automatically selected.
MID
USE
3 set
The language that can be selected depends on the
broadcast.
HIGH
“3D CINEMA SOUND” does not work with headphones.
Switch to another language
AUDIO
SELECTION
(Digital channels)
Audio Selection
1 select
English
ZOOM
Gaelic
Welsh
2 set
The language that can be selected depends on the
broadcast.
Please read ““Dolby Digital” output from the
“DIGITAL AUDIO OUT” terminal” (P. 56) before
selecting “Dolby”.
29
· Subtitle / Audio selection / Sleep timer / Zoom, etc.
Change the
aspect ratio
1 select
2 set
ZOOM
Using “AUTO” “AUTO in “ZOOM”” (P. 54)
When 720p (750p) or 1080i (1125i) signal is received, the signal will be
displayed as “FULL”. The zoom menu will not be displayed.
TROUBLE?
: Special audio track for the visually impaired
Undefined : When the audio’s language cannot be
identified
Dolby : Dolby Digital
AUTO
REGULAR
PANORAMIC
14:9 ZOOM
16:9 ZOOM
16:9 ZOOM SUBTITLE
FULL
SETTINGS
Select audio
language
30
2/13/2007 4:51:18 PM
Useful functions
1
(continued)
Display the menu
1
FEATURES
SLEEP TIMER
CHILD LOCK
BLUE BACK
FAVORITE SETTING
APPEARANCE
ON
TYPE A
2 next
1 select
MENU
PICTURE
SOUND
FEATURES
SET UP
Set a time
for the TV to
turn itself off
SLEEP TIMER
2 next
3
Cancel Set the time to “0” in step 2
Remaining time You can confirm the remaining time at step 2, after repeating this process.
Select
FEATURES
SLEEP TIMER
CHILD LOCK
BLUE BACK
FAVORITE SETTING
APPEARANCE
ON
TYPE A
1
To the previous
screen
Stop
children from
watching
specific
channels
4
SLEEP TIMER
CHILD LOCK
BLUE BACK
FAVORITE SETTING
APPEARANCE
select
“CHILD LOCK”
ON
TYPE A
(a secret number of your choice)
SET ID NO.
3 set
CHILD LOCK
PR
AV
01
02
03
04
05
06
07
08
09
(blue)
ID
_____
BBC1
BBC2
ITV
CH4
CH5
_____
CH
CH
CH
CH
CH
CH
21
22
23
24
25
CH
CH
CH
26
27
28
Lock more channels
CHILD LOCK
PR
AV
01
02
03
04
05
06
07
ID
_____
BBC1
BBC2
ITV
CH4
CH5
_____
CH
CH
CH
CH
CH
CH
21
22
23
24
25
CH
26
Repeat steps 3 and 4
SETTINGS
CHILD LOCK
(Analogue
channels)
3
FEATURES
USE
2
Exit
OFF
PREPARE
3
2
IMPORTANT!
2
SLEEP TIMER
5
(blue)
Release a channel Press “ ” again in step 4
press “
step 2.)
” and enter your “ID NO.”. (If you forget your “ID NO.”, check it in
BLUE BACK (Analogue channels): Display blue screen and mute the sound when the signal is weak
or absent (ON / OFF).
31
TROUBLE?
View a locked channel Use the numerical buttons to enter the channel number. When n appears,
32
2/13/2007 4:51:25 PM
Just the way
you like it
Customising your TV
1
Menu
Select a menu
PICTURE
SOUND
FEATURES
SET UP
DTV
1 select
2 next
select
STANDARD
PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
COOL
SOUND
Backlight brightness (Darker Brighter)
CONTRAST
Contrast (Lower Higher)
BRIGHT-2
Brightness (Darker Brighter)
SHARP
Sharpness (Softer Sharper)
COLOUR
Colour (Lighter Deeper)
HUE (NTSC only)
Tint (Reddish Greenish)
COLOUR TEMP.
FEATURES
STEREO / t · u
BASS
Low tones (Weaker Stronger)
TREBLE
High tones (Weaker Stronger)
BALANCE
Speaker balance (Left Stronger Right Stronger)
HYPER SOUND
3D CINEMA SOUND
1 adjust /
select
2 set
When adjusting
SLEEP TIMER
1 adjust
2 set
1 select
STANDARD
CHILD LOCK
Stops children from watching specific channels (P. 31)
BLUE BACK
(ON / OFF)
APPEARANCE
(TYPE A / TYPE B)
AUTO PROGRAM
Select a country, it automatically registers channels (P. 13, ⁄)
EDIT / MANUAL
LANGUAGE
Select a language for on-screen menus (P. 13, !)
DECODER (EXT-2)
EXT SETTING
HDMI SETTING
ATTENUATOR
For when digital channels are not received because of too strong radio waves
(ON / OFF)
Sub-menu
Adjustments / Configurations
Other settings · Change the aspect ratio “ZOOM” (P. 30)
· Turn on “3D CINEMA SOUND” “3D CINEMA SOUND” (P. 30)
33
TROUBLE?
Some items have a
sub-menu.
2 set
COOL
SET UP
When selecting
from presets
STANDARD
PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
SETTINGS
Move
PICTURE
USE
The menu disappears
after one minute of
inactivity.
Some functions may
not be displayed on
menu depending on the
situation.
Adjust / Configure
FEATURES
PICTURE
Items
4
BRIGHT-1
PREPARE
Select an item
To the previous
screen
Exit
IMPORTANT!
DTV menu is available only when
watching digital channels (P. 35)
3
Item
PICTURE MODE
MENU
PICTURE
2
Display the menu
34
2/13/2007 4:51:26 PM
Using DTV menu
Digital channels original function and setting can be selected from the DTV menu.
1
Menu
Item
Timer
Reserve a programme to record / watch (P. 27)
Edit / Delete / Lock registered digital channels or add them to favourites.
(P. 45)
Edit PR
1 select
MENU
2 next
Setup
4
Select “Setup”
1 select
DTV Menu
Timer
Edit PR
Configuration
Installation
To the previous
screen
2 next
5
Select an item
Setup
14:00
05/05/2006
PCM
Banner Duration
2 sec
Receiver Upgrade
Auto
Common Interface
No CI Module
Antenna Power
select
Change setting
select
Antenna Power
35
Select the default language for subtitle (P. 39)
Enter PIN Code
Change PIN code (P. 39)
Favourite Mode
Enable your favourite channels (P. 39)
When the Dolby Digital signal is received, you can select to output the
signal from the DIGITAL AUDIO OUTPUT terminal. (P. 41)
Banner Duration
Select the display time for channel information (2 sec / 5 sec / 8 sec)
Receiver Upgrade
Upgrade your tuner software as newer versions becomes available. (P. 41)
Common Interface
Set Conditional Access Module (P. 41)
Antenna Power
Power supply for the indoor aerial (P. 41)
Service Scan
Register channels (P. 43)
Signal Check
Check the broadcast signal (P. 43)
Factory Settings
Initialise the DTV settings (P. 43)
When watching digital channels or changing DTV menu settings, it may be necessary for you to
enter a PIN code.
Once a PIN code has been entered, there is no need to enter it again until the TV is turned off.
The default PIN code is “0000”.
You can set your own PIN code. “Enter PIN Code” (P. 39)
Finish
TROUBLE?
7
Off
Select the default language for audio (P. 39)
Subtitle Language
SETTINGS
6
Audio Language
When entering the PIN code
Off
Exit
Confirm the language for on-screen menus (P. 39)
USE
Installation
Setup
Confirm the country of installation (P. 39)
Menu Language
PREPARE
PICTURE
SOUND
FEATURES
SET UP
DTV
Country
IMPORTANT!
DTV
3
Select “DTV”
Configuration
2
Display the menu
36
2/13/2007 4:51:27 PM
2
To reduce noise
PICTURE
SOUND
FEATURES
SET UP
DTV
ON
OFF
: Function is
turned off
ON
:When the picture
loses sharpness
AUTO
OFF
: Function is
turned off
ON
: Function is
always on
DigiPure
1 select
PICTURE
PICTURE MODE
BRIGHT-1
CONTRAST
BRIGHT-2
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES
STANDARD
COOL
Select an item
1 select
FEATURES
DIGITAL VNR
Di gi Pure
MOVIE THEATRE
COLOUR SYSTEM
4:3 AUTO ASPECT
For
natural-looking
outlines
PREPARE
For smooth
cinema film
MOVIE THEATRE
AUTO
: Automatically
adjusts
OFF
ON
AUTO
USE
To the previous
screen
ON
: When noise
appears
1 select
MENU
2 next
4
OFF
: Function is
turned off
DIGITAL VNR
2 next
3
ON
IMPORTANT!
1
Display the menu
2 next
COLOUR SYSTEM
Exit
5
1 select
FEATURES
DIGITAL VNR
Di gi Pure
MOVIE THEATRE
COLOUR SYSTEM
4:3 AUTO ASPECT
OFF
ON
AUTO
PAL
When there is
no colour
COLOUR SYSTEM
6
PAL
: Western
Europe
2 set
NTSC 4.43
: USA
4.43 MHz
AUTO
: When watching
videos, etc.
· Reduce noise / Watch a more natural picture, etc.
4:3 AUTO ASPECT
PANORAMIC
REGULAR
14:9 ZOOM
Select a default aspect ratio for Auto in
“ZOOM” (P. 54)
PANORAMIC
REGULAR
14:9 ZOOM
16 : 9
4:3
14 : 9
TROUBLE?
4:3 AUTO ASPECT
NTSC 3.58
: USA
3.58 MHz
Finish
Set a default
aspect ratio
37
SETTINGS
The menu disappears
after one minute of
inactivity.
Change settings
38
2/13/2007 4:51:28 PM
DTV configuration
Available for favourite channel selection and changing PIN code, etc.
1
Menu
Language
The language for on-screen menus
English
English only
Audio
Language
Select a default language for audio
English
Gaelic
For visually
impaired
Subtitle
Language
Select a default language for subtitle
Gaelic
For hearing
impaired
Select “DTV”
PICTURE
SOUND
FEATURES
SET UP
DTV
Welsh
1 select
DTV Menu
Timer
1 Select “Enter Pin Code”
Setup
Installation
Country
Select an item
Configuration
05/05/2006
United Kingdom
Menu Language
English
Audio Language
English
Subtitle Language
English
2 Input the current code
1 select
Favourite Mode
05/05/2006
United Kingdom
Menu Language
English
Audio Language
English
Subtitle Language
English
English
Off
English
select
Off
2 next
Change PIN
code
Default is “0000”.
“When entering the PIN code” (P. 38)
If you forget the code Input “0081”
Enter PIN code
Favourite Mode
Audio Language
Subtitle Language
This function
is locked.
Enter
PIN Code
Favourite Mode
Enter PIN code
14:00
Country
14:00
USE
Configuration
2 next
5
English
Select “Configuration”
Configuration
Welsh
1 select
MENU
Edit PR
To the previous
screen
United Kingdom
Display the menu
2 next
4
The country of installation
PREPARE
3
United Kingdom only
Country
IMPORTANT!
2
Off
Enter PIN Code
Exit
3 Input a new code twice.
English
Subtitle Language
English
Off
Enter PIN Code
Off
Configuration
14:00
Country
Menu Language
Audio Language
Subtitle Language
05/05/2006
United Kingdom
English
English
English
Subtitle Language
English
Off
2 Select “On”
1 select
1 select
On
English
Enter PIN code
Favourite Mode
Audio Language
Enter
PIN
Code
Teletext
Language
PIN code
changed
Favourite
Mode
Enter
PIN Code
OK
Off
2 set
If you cannot select “On”, register channels in “favourites”
first “Favourites” (P. 47)
TROUBLE?
Audio Language
Confirmation Teletext
Enter PIN
Code
Language
1 Select “Favourite Mode”
Enable your
favourite
channels
Favourite Mode
39
English
Enter PIN Code
Note
When not broadcast in the default language, on-screen
displays and audio output in that language are not
available. In this case, the language that can be displayed
and heard depends on the broadcast.
English
Audio Language
Subtitle Language
Enter new PINTeletext
codePIN
Language
Enter
Code
SETTINGS
6
Finish
40
2/13/2007 4:51:28 PM
DTV setup
Available for setting power supply for the aerial, and upgrading the tuner
software, etc.
1
2
Display the menu
Output the
Dolby Digital
signal
PCM
: The Linear PCM
signal is output
PCM
Dolby Digital
: The Dolby Digital
signal is output
Only when the Dolby Digital signal is received
Please read ““Dolby Digital” output from the “DIGITAL AUDIO OUT” terminal” (P. 56) before setting.
You can upgrade the tuner software as newer versions become available. Normally set to “Auto”.
Manual
: Manually download and
This occurs at midnight when
the TV’s power is off.
When you change the setting,
enter PIN code.
When JVC or the broadcasting station informs you of the new software, download it as follows.
Select “DTV”
1 Select “Manual”
Upgrade
tuner
PICTURE
SOUND
FEATURES
SET UP
DTV
2 Select “Search for new”
1 select
Software Version
2.14.03
Manual
2 next
If upgrading is not necessary,
select “OK” to finish.
Enter PIN code if needed.
Select “Setup”
3 Select “Yes”
1 select
DTV Menu
Timer
New software found.
Would you like to upgrade now?
Edit PR
Configuration
Yes
In standby
1 select
Downloading new software
Cancel
No
Setup
Installation
5
If the TV has upgrade to the latest tuner software, the message “Search completed. No new software found” will appear.
Select “In standby” instead of “Yes” if you want to upgrade the software automatically when the TV is turned off.
Select an item
Setup
14:00
05/05/2006
PCM
Banner Duration
2 sec
Receiver Upgrade
Auto
Common Interface
No CI Module
Antenna Power
select
To watch pay-TV digital channels, use the Conditional Access Module menu.
This function can only be used when pay-TV can be received in your region.
Off
Exit
Set
Conditional
Access
Module
Common Interface
No CI Module
No CI Module
: Function is not
available
1 Press “OK” button to display the
Conditional Access Module menu
When the Conditional Access Module etc. is
inserted after subscribing to the broadcasting
company, this function is available.
“Watch pay-TV digital channels” (P. 8)
2 Follow the instructions on the
screen to set up pay-TV
The content of the menu is different depending on the broadcasting company.
For details, consult your broadcasting company
The language shown in the menu may differ to the “Language” set for the TV.
Antenna Power
Off
Off
: Power not
supplied
On
: Power supplied
Please read “Power supply for the indoor aerial” (P. 55) before setting.
Banner Duration: Select the display time for channel information (2 sec / 5 sec / 8 sec).
41
TROUBLE?
Power supply
for the indoor
aerial
SETTINGS
6
Finish
“Software upgraded
successfully! TV will
now reset!”.
USE
2 start
2 next
2 next
To the previous
screen
Search for new
OK
Receiver Upgrade
1 select
PREPARE
1 select
MENU
2 next
4
Auto
: Automatically download and
IMPORTANT!
3
Auto
42
2/13/2007 4:51:30 PM
DTV installation
Available for registration of digital channels, checking of digital channels signal,
and initialisation of all digital channels settings.
1
Automatic : Scan automatically
Manual : Scan a specified channel range
Network : You can select and register only necessary networks.
Scan
Start Channel
Stop Channel
Specify a scanning channel range
(For “Manual”)
Mode
Add : Add a new channel to the registered channel
Reinstall : Register all channels again
Display the menu
Register a
new channel
Service Scan
MENU
Start Channel
Automatic
__
Stop Channel
__
Mode
Add
1 select
Stop Channel
05/05/2006
Automatic
__
__
Add
Start Scan
UHF33:3 Services found
For “Network”
1 select
Select broadcasting stations from a list
1 select
Network Name
Scan completed! Store services?
Yes
BBC
ITV
No
2registered / cancel
2 set
Select “Installation”
DTV Menu
Start Channel
Mode
3 Select “Yes”
2 next
4
Scan
BBC ONE
BBC TWO
BBC THREE
Start Scan
PICTURE
SOUND
FEATURES
SET UP
DTV
14:00
Service
registered
1 select
PREPARE
3
Select “DTV”
2 change
2 Select “Start Scan”
Scan
Service Scan
1 select an item
IMPORTANT!
2
1 Set items
3 set
Timer
Edit PR
Configuration
Signal Check
14:00
05/05/2006
Setup
Installation
5
Select an item
Installation
1 select
Check the
broadcast
signal
Channel
33
Signal : Excellent
This channel is the frequency of the digital
broadcasting. It differs from the channel number
select
displayed in the TV.
Select another broadcast channel Signal Quality
Signal Strength
Signal Check
Signal level
Signal : Excellent
Service Scan
Poor
Signal Check
Exit
Acceptable
2 next
Finish
All registered digital channels are deleted and the DTV menu settings are initialised. Digital channels are
reregistered.
1 Enter PIN code
This function is locked.
Initialise the
DTV settings
Factory Settings
SETTINGS
6
Default is “0000”.
1 select
Are you sure you want to delete the PR list and
reset all settings?
Yes
No
2 next
Ÿ in “Initial settings” (P. 12)
TROUBLE?
2 Select “Yes”
Excellent
Factory Settings
43
USE
2 next
To the previous
screen
Service
BBC ONE
BBC TWO
BBC THREE
44
2/13/2007 4:51:31 PM
Editing digital channels
Edit the channels registered with “Automatic” in “Initial settings” (P. 12).
1
Edit PR List
Switch TV / RADIO
Switch to digital
channels
14:00
2 Change the name
05/05/2006
TV
1. BBC ONE
1 select
Edit PR List
2. BBC TWO
3. ITV1
3. ITV1
Name
4. Channel 4
4. Nelonen
BBC ONE
5. five
5. five
6. ITV2
Edit a
channel name
Name
Display the menu
6. ITV2
7. BBC THREE
8. BBC FOUR
Name
Delete
Number
Lock
Favourites
2 next
7. BBC THREE
Number
Edit PR List
14:00 05/05/2006
TV
1. BBC ONE
14:00 05/05/2006
TV
1. ABCDEFG
2. BBC TWO
2. BBC TWO
3. ITV1
3. ITV1
4. Channel 4
5. five
6. ITV2
6. ITV2
7. BBC THREE
7. BBC THREE
8. BBC FOUR
8. BBC FOUR
Name
PICTURE
SOUND
FEATURES
SET UP
DTV
2 next
4
Number
Delete
Lock
Name
Favourites
1 Select “Number”
Edit PR List
14:00
05/05/2006
TV
1. BBC ONE
Edit a
channel
number
Number
1 select
Edit PR List
14:00
3. ITV1
Number
3 Select “OK”
05/05/2006
TV
1. BBC ONE
14:00 05/05/2006
TV
1. BBC ONE
2. BBC TWO
Edit PR List
2. BBC TWO
3. ITV1
3. ITV1
5. five
4. Nelonen
001
5. five
6. ITV2
6. ITV2
7. BBC THREE
7. BBC THREE
7. BBC THREE
8. BBC FOUR
8. BBC FOUR
4. Channel 4
8. BBC FOUR
Number
Favourites
2 Change the number
2. BBC TWO
Name
Lock
Delete
Delete
Lock
Favourites
2 next
Name
Number
Delete
Nelonen
PR001
exists! 4.
Move
it?
OK
Lock
Name
Favourites
Number
Select “Edit PR”
Number
5. YLE FST
Cancel
6. Subtv
Delete
Lock
Favourites
2 move
Only when the same channel
number exists.
The channels are rearranged in
numerical order.
1 select
DTV Menu
1 select
PREPARE
3
Favourites
3 Set
Edit PR List
1 select
Lock
Delete
4. Nelonen
ABCDEFG
5. Yfive
MENU
2 move position
8. BBC FOUR
Name
Name
Select “DTV”
1 select character
14:00 05/05/2006
TV
1. BBC ONE
2. BBC TWO
IMPORTANT!
2
1 Select “Name”
Timer
Edit PR
Configuration
1 Select “Delete”
Setup
Installation
To the previous
screen
5
Select a channel
Edit PR List
14:00
TV
1. BBC ONE
05/05/2006
Delete
a channel
Edit PR List
14:00 05/05/2006
TV
1. BBC ONE
2 Select “Yes”
1 select
Edit PR List
3. ITV1
The selected PR will
be permanently
4. Nelonen
deleted. Do you want to proceed?
5. YLE FST
Yes
No
6. Subtv
3. ITV1
Delete
5. five
6. ITV2
7. BBC THREE
8. BBC FOUR
2. BBC TWO
Name
3. ITV1
Number
Delete
Lock
1 select
2. BBC TWO
2. BBC TWO
4. Channel 4
select
14:00 05/05/2006
TV
1. BBC ONE
USE
2 next
Favourites
2 next
7. BBC THREE
2 delete
8. BBC FOUR
Name
Number
Delete
Lock
Favourites
4. Channel 4
5. five
6. ITV2
Exit
7. BBC THREE
1 Select “Lock”
8. BBC FOUR
Name
Edit
Delete
Lock
Favourites
Stop Children
from watching
specific
channels
Lock
7
Finish
Edit PR List
2 Lock
14:00 05/05/2006
TV
1. BBC ONE
select
Edit PR List
14:00
TV
1. BBC ONE
2. BBC TWO
2. BBC TWO
3. ITV1
3. ITV1
4. Channel 4
4. Channel 4
5. five
5. five
6. ITV2
6. ITV2
7. BBC THREE
7. BBC THREE
8. BBC FOUR
Name
Number
Delete
Lock
8. BBC FOUR
Favourites
Name
Number
Delete
Lock
Favourites
Enter PIN code if needed
1 Select “Favourites”
Edit PR List
14:00 05/05/2006
TV
1. BBC ONE
Edit PR List
TV
1. BBC ONE
2. BBC TWO
3. ITV1
3. ITV1
4. Channel 4
4. Channel 4
5. five
5. five
6. ITV2
8. BBC FOUR
Name
Number
Delete
Lock
Favourites
Favourite icon
6. ITV2
2 set
7. BBC THREE
Favourites
1 select
2. BBC TWO
7. BBC THREE
8. BBC FOUR
Name
Number
Delete
Lock
Favourites
To release, press “OK” button
again.
To move through only your
favourite channels and have
them appear in the PR list.
“Favourite Mode” (P. 39)
TROUBLE?
Register your
favourite
channel
45
To release, press “OK”
button again.
To enable “Lock”
function, turns the TV off
Lock icon
and on again.
To watch the locked
channels, the PIN code
must be entered.
SETTINGS
6
Number
46
2/13/2007 4:51:32 PM
Editing analogue channels
When coming from “Initial settings” (P. 13), skip to @.
1
Move a
channel’s
position
1 Begin
move out
3
1 Begin
PR
AV
01
02
03
04
05
06
07
08
09
EDIT
ID
_____
BBC1
BBC2
CH4
CH5
_____
select
CH
21
22
ITV
CH 24
CH 25
CH
CH
CH
CH
23
26
27
28
Exit
6
7
(red)
Select “SET UP”
1 select
MENU
PICTURE
SOUND
FEATURES
SET UP
Edit a
channel
name
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
BBC1
BBC2
ITV
CH4
CH5
_____
A
CH
CH
CH
CH
CH
CH
21
22
23
24
25
CH
CH
CH
26
27
28
enter
the first (blue)
character
Select “EDIT/MANUAL”
SET UP
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
HDMI SETTING
ATTENUATOR
1 select
ON
1 Begin
OFF
Select a row
select
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
BBC1
BBC2
ITV
CH4
CH5
_____
next
column
CH
CH
CH
CH
CH
21
22
23
24
25
CH
CH
CH
26
27
28
(green)
INSERT
CH
Delete a
channel
Confirm settings
DOWNLOAD TV
CH
CH
CH
CH
CH
CH
21
22
23
24
25
CH
CH
CH
26
27
28
ID LIST
M6
MBC
MCM
MDR
MOVIE
MTV
MTV3
1 select
2 set
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
BBC1
BBC2
ITV
CH4
CH5
_____
J VC
1 enter
CH
CH
CH
CH
CH
CH
21
22
23
24
25
CH
CH
CH
26
27
28
2 next
column
3 set
PR
AV
01
02
03
04
05
06
07
08
09
ID
_____
BBC1
BBC2
ITV
CH4
CH5
_____
Receives the
broadcast signal.
CH
CH
CH
CH
CH
CH
21
22
23
24
25
CH
CH
CH
32
26
27
1 Delete
(yellow)
EDIT
PR
AV
01
02
03
04
05
06
07
DELETE
ID
_____
BBC2
ITV
CH4
CH5
_____
CH
CH
CH
CH
CH
22
23
24
25
CH
CH
26
27
2 Beginning channel search
When using
“T-V LINK”
(blue)
RECORDING DEVICE
ID
CH
CH
CH
_____
_____
_____
_____
_____
_____
29
21
(red)
From low
frequencies
(green)
or
MANUAL
PR
10
11
12
13
14
15
16
17
CH
CH
CH
ID
29
22
_____
_____
_____
_____
_____
_____
Auto-search begins, and the nearest
Repeat the previous steps until the
desired channel is displayed
MANUAL
3 Set
EDIT
PR
10
11
12
13
14
15
16
17
ID
_____
_____
_____
_____
_____
_____
CH
CH
CH
29
35
Picture fine tuning (yellow) (blue)
/
TROUBLE?
If “FEATURE NOT
Is a “T-V LINK”
When not using
compatible device
“T-V LINK”
Is the device turned on?
“T-V LINK” (P. 11)
PR
10
11
12
13
14
15
16
17
From high
frequencies
SETTINGS
T-V LINK
ID
_____
BBC1
BBC2
ITV
CH4
CH5
_____
M
“CH/CC” List (P. 53)
In Ireland, select CH/CC with 1 4.
Edit
Finish
PR
AV
01
02
03
04
05
06
07
08
09
2 Enter a number
EDIT
Insert a
channel
Register a
new channel
move in
EDIT
MANUAL
47
26
27
28
When manually naming a channel
ID
1 Begin
8
CH
CH
CH
USE
21
22
24
25
23
PREPARE
To the previous
screen
CH
CH
CH
CH
CH
EDIT
EDIT
2 next
5
CH
When selecting a preset name from the “ID LIST”
2 next
4
ID
_____
BBC1
BBC2
CH4
CH5
ITV
_____
PR
AV
01
02
03
04
05
06
07
08
09
CH
CH
IMPORTANT!
2
3 Finish
EDIT
MOVE
Display the menu
48
2/13/2007 4:51:34 PM
When you
have trouble
Troubleshooting
Problem
Actions
page
Analogue channels
Severe noise or
snow
Not displayed
(black screen)
Is the power cord connected to the AC outlet
correctly?
–
Digital channel screen
is frozen
Hold down “ ” and “
” on the TV simultaneously for
three or more seconds to restart.
–
display on menu
It is not a malfunction. Some functions in the menu will not be
displayed depending on the situation.
–
unintentionally
Press “
34
38
Unnatural colour >>> Adjust “COLOUR” and “BRIGHT”.
Check your “COLOUR SYSTEM”
Noise >>> Set to the following functions.
DIGITAL VNR :
ON
DigiPure :
OFF
Dull picture >>> Set to the following functions.
DIGITAL VNR :
OFF
DigiPure :
ON
26
Strange picture
device
If you connected S-Video output device, check the “S-IN”
setting.
If the top of the image is distorted, check the video signal
quality itself.
If movement appears unnatural when receiving a signal
from a DVD player, etc. with 625p (progressive-scanning),
change the output setting of the external device to 625i
(interlace-scanning).
Poor sound
Adjust the “BASS” and “TREBLE”.
If receiving a poor signal in “STEREO / t·u”, switch to “MONO”.
34
34
30
34
38
38
34
38
38
–
TROUBLE?
49
Unplug TV, several minutes later plug it in again.
SETTINGS
Digital channels (P. 14)
Are the batteries flat?
Are you more than 7 meters away
from the TV?
Is the “VCR/TV/DVD SWITCH” set to “TV”?
When viewing teletext, the TV menu does not appear.
Depending on the stability of the signal, there may be a time
lag when changing channels.
Sound
Are you receiving interference
from signals reflected off
Adjust the direction of your
The remote
control doesn’t
work!
Remote control
stops working
Picture
Ghosting
–
USE
Is the aerial receiving interference
Consult your retailer
Are connected devices too close
to the TV?
Insert the minimum distance
interference
Screen
14
PREPARE
Patterns, stripes
or noise
49
IMPORTANT!
Basics
Is the TV connected correctly to
the aerial?
Change the direction of the aerial.
Is the aerial or its cable
damaged?
Consult your retailer
Is the analogue channel reception poor, too?
Following the instructions in “Severe noise or snow”
can solve this problem.
Digital channels are not displayed
When the TV cannot find the digital channels
There may be problems at the aerial, radio waves,
or the area you live in, where reception is bad.
Consult your retailer.
50
2/13/2007 4:51:36 PM
Troubleshooting
Problem
Actions
Switch “SIZE” in “HDMI SETTING” to “1” or “2”.
No sound
Check if the device is compliant with HDMI.
Switch “AUDIO” in “HDMI SETTING” to “DIGITAL” or “AUTO”
34
page
LCD panels use fine dots (“pixels”) to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light, or may light all
the time.
Please understand that this is not a malfunction.
Some digital channels cannot be watched on this TV.
55
56
“Dolby Digital selected!
No analogue audio
available”
When “Dolby Digital” is selected in “Digital Audio Output”, the
sound of a programme containing “Dolby Digital” signals cannot
be output from the TV or the audio system connected to the
“AUDIO OUT” terminal.
When the channel is changed, a message will be displayed for
a few seconds.
To listen with the TV or audio system
Select a language without “(Dolby)” from “Audio Selection”
Switch “Digital Audio Output” to “PCM”
–
–
work
It is not a malfunction. Some functions in the menu do not
–
29
41
USE
DTV
54
54
–
PREPARE
Functions
Black or white dots
appear on the screen
–
34
Wait a little for the signal to stabilize when switching the
“FEATURE NOT
AVAILABLE”
Actions
–
Green and distorted
screen
Is the “T-V LINK” compatible device connected to “EXT-2”?
Is the SCART CABLE “Fully Wired”?
Is the “T-V LINK” compatible device turned on?
Problem
IMPORTANT!
Use the cable marked with HDMI logo.
HDMI
page
Screen
Wrong screen size
(continued)
Forgot my PIN code!
The default PIN code is “0000”. If you forget the numbers that
you used to change the default PIN code, first input “0081” in
the “Enter PIN code” and then register a new PIN code.
Locked channels can
be watched without
inputting PIN code
Once the PIN code is input, the lock function is released. If
you want to use the lock function again, turn the TV off and
then turn it on again.
When JVC or the
broadcasting station
informs you of the
software
Upgrade the tuner software by using the “Receiver Upgrade”
function.
41
“Services have
changed. Do you want
to Update PR list?” is
diplayed
Update the PR list (digital channels) “Updating the PR list”
57
39
After confirming all the conditions above,
press “OK” button again.
–
“NO RECORDING
POSSIBLE”
The displayed video cannot be recorded.
–
“NO RECORDING
MEDIA PROBLEM”
The recorder is not ready for recording.
Check the videotape or DVD disc.
“NO RECORDING
DEVICE BUSY”
51
The recorder is recording another programme, or is playing.
–
–
–
TROUBLE?
A problem occurs at the recorder.
SETTINGS
Error message
“NO RECORDING”
52
2/13/2007 4:51:36 PM
“CH/CC” List
To use the INSERT function (P. 48), find the CH/CC number corresponding to the TV’s channel number
from this table. If you want to know a particular TV channel’s channel menu, look in TV listings magazines or
contact the broadcaster.
When the Country setting is United Kingdom, the CC number channels and channels from CH02 to
CH12 cannot be received.
Channel
E40
CC
CC 01
Channel
S1
CC
CC 31
Channel
S31
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
E3, IR B
E4, IR C
E5, IR D
E6, IR E
E7, IR F
E8, IR G
E9
E10, IR H
E11, IR J
E12
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 75
CC 76
CC 77
CC 78
CC 79
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
X
Y
Z
Z+1
Z+2
Set “AUDIO” in “HDMI SETTING” to “ANALOGUE” or “AUTO” (P. 34)
EXT-5 input does not support analogue sound (EXT-3).
EXT-5 input does not support DVI devices.
AUTO in “ZOOM”
received.
The aspect ratio will turn to the ratio obtained from WSS (Wide Screen Identification Signal), video signal, or
ASPECT” (P. 38)
USE
CH
CH 40
PREPARE
Channel
E2, IR A
IMPORTANT!
CH
CH 02
By using T-V LINK :
You can send the analogue channel information programmed on the TV to the “T-V LINK” compatible device,
so that both the TV and the external device have the same channel settings. When connecting a new external
device, channel information is loaded into it, allowing channel setup to be completed very quickly. For more
details, refer to the external device’s manual.
You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the
After timer-record setting, the TV will instruct the recorder to start and stop recording, via DIRECT REC.
If you accidentally cut the power cord
Attach a new plug following the steps below. If in doubt, contact your local retailer.
Important
Never connect to the larger terminal marked with an “E”, the safety earth
symbol “ ” or coloured green or green-and-yellow.
The wires in the mains lead on this product are coloured with the following code:
· Blue: Neutral wire (connect to the black terminal, or one marked “N”)
· Brown: Live wire (connect to the red terminal, or one marked “L”)
SETTINGS
Change the fuse in the plug
Open the plug as illustrated on the right.
When replacing the fuse, always use a correctly rated and approved type and
re-fit the fuse cover when finished.
If in doubt, contact your local retailer.
Fuse
TROUBLE?
53
54
2/13/2007 4:51:37 PM
(continued)
“Dolby Digital” output from the “DIGITAL AUDIO OUT” terminal
Some digital channels are broadcasted with “Dolby Digital” signals.
In these cases, “Dolby Digital” signals can be output from the “DIGITAL AUDIO OUT” terminal.
1. Connect an audio system with a “Dolby Digital” decoder. (P. 10)
2. Change the “Digital Audio Output” setting from “PCM” to “Dolby Digital”. (P. 41)
When changing the setting, the message “Dolby Digital selected! No analogue audio available.” may be
displayed for a few seconds.
Each time the channel is changed to a channel that is broadcast with “Dolby Digital” signals, the message
“Dolby Digital selected! No analogue audio available.” may be displayed for a few seconds.
Even if “Dolby Digital” is set, “linear PCM” signals will be output by a channel that is not broadcast with “Dolby
Digital” signals.
Set the audio system so that it is compatible with both “Dolby Digital” and “linear PCM”. (For details, refer to
the audio system instruction manual.)
When you want to temporarily change the setting from “Dolby Digital” to “PCM”, change with the “Audio
Selection” menu (P. 29).
To change the setting after “Initial settings” is complete “Antenna Power” (P. 41)
Digital channels that cannot be watched on this TV
Set “Digital Audio Output” to “PCM” in the following cases.
The sound of a channel broadcast with “Dolby Digital” signals cannot be heard even when “Dolby
Digital” is set.
When listening with the TV speakers.
When listening with an audio system that does not have a “Dolby Digital” decoder.
When recording a programme.
If a language with “(Dolby)” is selected when “(Dolby)” is displayed in the “Audio Selection” menu
(P. 29), the “Digital Audio Output” setting can be temporarily changed from “PCM” to “Dolby
Digital”.
PREPARE
If a digital channel service uses new formats (such as DVB-H or MPEG4, etc.), or MHP, it cannot be watched even
though the channel name appears.
If the channel is selected, the picture will not appear and audio cannot be heard.
You can delete these channels by using the “Delete” in the “Edit PR”.
“Editing digital channels” (P.45)
IMPORTANT!
Power supply for the indoor aerial
When using an indoor aerial which needs external power, set “Antenna Power” to “On” during “Initial settings” (P. 11).
The TV will supply DC 5V 50mA (max) from the aerial socket through the cable to the aerial.
Supplying power to outdoor and indoor aerials which does not need external power, may cause damage to the
aerial. If you are uncertain whether the aerial needs external power, select “Off”.
Connect the aerial directly to the TV. When a recording device is connected between the aerial and the TV,
power can not be supplied to the aerial.
Power is supplied to the aerial only when the TV is on.
A message recommending you to change the “Digital Audio Output” setting to “Dolby Digital” is displayed for
a few seconds.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
USE
If you want to record a “Dolby Digital” signal using timer-record (P. 27), change the “timer-record
setting” from “PCM / Analogue” to “Dolby Digital”. However, if the setting is changed to “Dolby
Digital”, you cannot record analogue sound with a recording device that is connected to the EXT-2
terminal.
SETTINGS
TROUBLE?
55
56
2/13/2007 4:51:37 PM
(continued)
Specifications
Main unit
Updating the PR list (Digital channel only)
The TV will run the reception test (for digital channel) at midnight (3AM) on a daily basis.
If the TV detects channels that became receivable or if the TV was not able to receive a certain channel, a
message about updating the PR list will be displayed when the TV is turned on.
The reception test will only operate when the TV is in standby. It will not operate when the TV is turned on.
If the TV does not detect any channels that needs to be updated, a message will not be displayed.
Services have changed.
Do you want to update PR list?
No
To update the PR list
To cancel the update
Select “No” and press the OK button.
If you want to update the PR list later, select “No” and press the OK button. Next time you turn on the TV this
message will not be displayed but you can also update the PR list using “Service Scan” (P. 43).
LT-32DA8BJ
LT-37DA8BJ
Colour systems
TV broadcast : PAL
External input : PAL, NTSC 3.58/4.43 MHz
LT-42DA8BJ
Digital : E21-E68 (Frequency : 474 MHz-850 MHz)
Analogue :
UNITED KINGDOM : E21-E69 (UHF)
IRELAND : IR A-IR J, E2-E12, E21-E69 (VHF/UHF)
NICAM (I)
Digital : MHEG 5 UK profile
Teletext systems
Analogue : FLOF (Fastext), WST (World Standard System).
Power requirements
AC 220 V - 240 V, 50Hz
Audio output (Rated power output) 6 W + 6 W
10 W + 10 W
Speakers
Power consumption
116 W
125 W
170 W
214 W
[standby]
[1.6 W]
[1.6 W]
[1.6 W]
[1.2 W]
Screen size
80 cm
92 cm
[without stand]
672 x 519 x 230
[672 x 471 x 107]
800 x 591 x 230
[800 x 545 x 99]
919 x 651.7 x 230 1030 x 719.1 x 296
[919 x 603.7 x 108] [1030 x 672 x 108]
Weights
[without stand]
Accessories
11.6 kg
14.3 kg
[10.8 kg]
[13.5 kg]
19.8 kg
[18.7 kg]
105 cm
PREPARE
1. Select “Yes” and press the OK button.
2. “Service Scan” menu is displayed.
Run the service scan to update the PR list ”Service Scan” (P. 43).
If “Reinstall” is set in “Mode” of “Service Scan” menu, All PR list setting will reset and all the reservations for
“Record” and “Remind” will be cancelled. If you want to leave those settings and just add channels, set the
“Mode” of “Service Scan” menu to “Add” (P. 43).
If “Add” is set in “Mode” of “Service Scan” menu, channels which the TV couldn’t receive will not be deleted from
the PR list. To delete those channels manually ”Edit PR list” (P. 45).
The service scan will take few minutes.
LT-26DA8BJ
CCIR I
IMPORTANT!
Yes
Model
23.9 kg
[22.1 kg]
A CAM (Conditional Access Module) for watching pay-TV digital channels can be installed (P.8).
DC power can be supplied to the indoor aerial (P.55).
USE
Terminal name
Terminal type
EXT-1
Euroconnector x 1
(SCART connector)
EXT-2
Euroconnector x 1
(SCART connector)
Input / Output
terminals
RCA connectors x 5
Composite video,
Analogue component
(576i (625i) / 480i (525i),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
HDMI connector x 1
HDMI
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
Input terminals
EXT-4 (HDMI 1)
EXT-5 (HDMI 2)
57
TV out
Dubbing out
DIGITAL
AUDIO OUT
OPTICAL connector x1
Digital audio
(48 kHz,16 bit
linear PCM /
Dolby Digital)
Headphone
Headphone
output
We may change the design and specifications without notice.
Notes
“T-V LINK”
compatible
TROUBLE?
Output
terminals
Signal type (OUT)
SETTINGS
EXT-3
Signal type (IN)
Composite video,
Analog RGB
AUDIO L / R
Analog RGB
AUDIO L / R
58
2/13/2007 4:51:37 PM
2/13/2007 4:51:38 PM

Televizor_JVC_LT-32A..

Transcription

Similar documents

Step # 13 Open up TMPGEnc 4.0 Express and click on “Start a new

Part Names - Main Unit English Guide

Published in Western Horseman - July, 2001

Customize Your Profile - Division of Student Affairs

View our Events Brochure

TALLULA PRIVATE EVENTS | FREQUENTLY ASKED QUESTIONS

Untitled - CooGiE`s Cafe Santa Monica

LED-2867T2CS_English_IM - Masterpiece .dk masterpiece.dk

AVR 156 - BGB Studio

A View of the New MUOnline Blackboard Learn 9.1