ET 2001-QSC-Z - Agent Tekstil

Transcription

ET 2001-QSC-Z
The ET 2001-QSC-Z, AC TECHNOLOGY incorporates many of the best solutions from the entire range of
Ferber’s electronic material handling trucks. Complete with 2 motorwheels, power-steering, hydraulically–
extendable forks and harness mounting capability, it transports and style-changes drawn patterns in the
loom. The whole operation is managed by only 1 operator. Another aid is the ability to operate the truck
using a wireless remote control.
Reed Width
Flange Diameter
Max. weight capacity
From 1500 mm
From 800 mm
From 1500 Kg
To 5400 mm
To 1100 mm
To 3000 Kg
10
ET 2001-F-Z
The electronic truck ET 2001-F-Z, AC TECHNOLOGY complete with two motorwheels and power-steering, responds completely to all the requirements of
carrying a warp beam by forks and moving it in the weave room easily and
eliminating heavy physical demands on the operator. The movements of the truck
are digitally-controlled and provide agile and precise operations. The truck is
furnished with various accessories including harness mounting capability and
wireless remote control.
New rudder
Reed Width
Flange Diameter
From 1500 mm
From 800 mm
From 1500 Kg
To 5400 mm
To 1100 mm
To 3000 Kg
11
ET 2001-C-Z
Electronic truck ET 2001-C-F, AC TECHNOLOGY, equipped with two motorwheels
and power steering, is foreseen with single or double cradle which, taking directly on
the yarn, allows to handle both half and full beams. The function digital control makes
each operation easy and precise. The truck can include various accessories among
which the harness mounting device and the radiofrequency remote control.
New rudder
Reed Width
Flange Diameter
From 1500 mm
From 800 mm
From 1500 Kg
To 5400 mm
To 1100 mm
To 3000 Kg
12
ETWOONE-Z
ETWOONE is a fully electric truck with electronic AC TECHNOLOGY. On account of the two motorwheels
the operator can carry out easy manoeuvres in limited space. Purposely studied for Picanol QSC looms it
allows to handle the quick style change modules to and from the textile machines and the preparation room.
Also studied for the single beam transport, all the operations are carried out by a single operator easily and
quickly.
The key to success is to keep the loom industrial speeds. machine running during the preparation work for the style
change. With the unique ETWOONE QSC, downtimes for style changes can be cut to 30 minutes.
Reed Width
Flange Diameter
From 1900 mm
From 800 mm
From 1500 Kg
To 3800 mm
To 1000 mm
To 2500 Kg
13
ET 200-F-Z
The ET 200-F-Z , AC TECHNOLOGY, is the base model electronic truck. The principle characteristics are
simplicity, convenience, ease of operation, safety of the worker, the ability to maneuver in tight spaces. Only one
operator is needed to manage the entire operation: lifting the warp beam from storage, the floor, or the loom by
means of forks and movement throughout the weave mill without physical stress. Also available with harness
mounting device
Reed Width
Flange Diameter
From 1500 mm
From 800 mm
From 1400 Kg
To 5400 mm
To 1000 mm
To 2000 Kg
14
ET 200-C-Z
The ET 200-C-Z, AC TECHNOLOGY, incorporates a design balance between simplicity
and precise working operation with convenience and operator safety. This truck is part of a
family of electronic trucks and are easily handled by only one operator. The beam can be
lifted from the floor or other supports by means of a single or double cradle and transported
to the loom for easy loading.
Automatic refilling system for wet acid battery
Reed Width
Flange Diameter
New Rudder
From 1500 mm
From 800 mm
From 1400 Kg
To 5400 mm
To 1000 mm
To 2000 Kg
15
CR29EE-F
Special version with forks and cradle
CR 29EE-F truck is a completely electric truck.
Two traction motor-wheels allow the operator to carry out easy manoeuvres even in limited spaces. Safety,
handiness and profitable are its main characteristics. The beam taking forks guarantee absolute safety both
during the transport and their positioning. It is available the version with harness mounting device to handle
the A-frames and the warp stop motion
Reed Width
Flange Diameter
From 1800 mm
From 800 mm
From 1000 Kg
To 3800 mm
To 1000 mm
To 1500 Kg
16
CR29EE-C
CR 29EE-C truck is a completely electric truck. Two traction wheels allow the operator to carry out easy
manoeuvres even in limited spaces. Safety, handiness and profitable are its main characteristics. The beam
is taken from the ground or from supports by means of a cradle and is transported to the loom for an easy
loading operation. It is available the version with harness mounting device to handle the Harness-frames and
the warp stop motion.
Reed Width
Flange Diameter
From 1800 mm
From 800 mm
From 1000 Kg
To 3800 mm
To 1000 mm
To 1500 Kg
17
CR29E-F
CR 29E-F with harness mounting device
The CR 29E-F is a truck with manual movement and electric lifting and translation of the beam. Three levers
positioned at the end of the truck manage the vertical rotation of the forks, the left/right translation of the
beam, and lifting/lowering of the central steering wheel which provides tracking during transport. The optional
harness mounting device is also electric and push button operated.
Reed Width
Flange Diameter
From 1800 mm
From 800 mm
From 1000 Kg
To 3800 mm
To 1000 mm
To 1500 Kg
18
CR29E-C
CR 29E-C with harness mounting device
The CR 29E-C satisfies the requirement of manual movement with electric lifting and translation of the beam. It is designed with a single
or double cradle and permits lifting twin beams and beams without center tube support. Hydraulic operations commanded by levers
placed on the truck perform tasks that would be very difficult to do manually by an operator.
Reed Width
Flange Diameter
From 1800 mm
From 800 mm
From 1000 Kg
To 3800 mm
To 1000 mm
To 1500 Kg
19
CR29-F
The CR 29-F is available in two versions:
a) without harness mounting
b) with harness mounting device.
CR29-F an ideal solution for manual beam movement and manual lifting. The truck has a central wheel
which, when placed in position by the lever, allows the proper tracking across the floor with ease. The
manual pump commands the forks’ vertical rotation and ease. The manual pump commands the forks’
vertical rotation and the left/right translation of the beam during loading/unloading at the loom.
Reed Width
Flange Diameter
From 1800 mm
From 800 mm
From 1000 Kg
To 3800 mm
To 1000 mm
To 1500 Kg
20
CR29-C
The CR 29-C is available in two versions:
a) without harness mounting
b) with harness mounting device.
Photo of the special version CR-29-CC
From the family of manual trucks, the CR 29-C permits beam transport using a single or double cradle.
A manual pump provides left/right translation of the beam for correct centering during the loading phase at
the loom. A harness mounting device is also available to manage both the drawn warp and the harness
group. Additional removable cradles are available in case of semi-empty warp beams.
Reed Width
Flange Diameter
From 1200 mm
From 800 mm
From 1000 Kg
To 4000 mm
To 1000 mm
To 1500 Kg
21
CSS-P
CSS-P truck belongs to the family of electric trucks. It allows the handling of the upper and lower warp beam one at a time. The loading
is accomplished from the ground or from specific storing trucks by means of forks or hooks. The truck handling is manual whereas that
of the beam is electric.
Reed Width
Flange Diameter
Max. Lifting capacity
From 1900 mm
From 600 mm
From 800 Kg
2760 mm
To 3600 mm
To 1000 mm
To 1400 Kg
22
CR 10EE-F
CR 10 EE is fully electric truck that permits handling up to a max 1000 mm diameter warp beams and fabric
rolls. The outstanding characteristics of this truck are its handling ease and the reduced requested
maneuvering spaces. All the functions are located in the rudder and can thus be handled by a single
operator.
Reed Width
Flange Diameter
From 1600 mm
1000 mm
1200 Kg
To 3800 mm
23
CR 8EE-F
CR 8EE-F with Forks is fully electric truck that permits handling up to a max 800 mm diameter warp beams
and fabric rolls. The outstanding characteristics of this truck are its handling ease and the reduced requested
maneuvering spaces. All the functions are located in the rudder and can thus be handled by a single
operator.
Reed Width
Flange Diameter
From 1200 mm
800 mm
800 Kg
To 3800 mm
24
CR8 EE-C
CR 8EE-C with Cradle is fully electric truck that permits handling up to a max 800 mm diameter warp beams
and fabric rolls.
Reed Width
Flange Diameter
From 1200 mm
800 mm
800 Kg
To 3800 mm
25
CR 8E-F
The CR 8E-F with Forks is ideal for the transport of either warp beams or cloth rolls up to 800 mm in
diameter. The load-handling operations are controlled by one single operator by means of push buttons
situated on the guiding rudder.
Reed Width
Flange Diameter
From 1200 mm
800 mm
800 Kg
To 3200 mm
26
CR 8E-C
The CR 8E-C with cradle is ideal for the transport of either warp beams or cloth rolls up to 800 mm in
diameter. The load-handling operations are controlled by one single operator by means of push buttons
situated on the guiding rudder.
It is also available in a version CR 8 which is completely manual.
Reed Width
Flange Diameter
From 1200 mm
800 mm
800 Kg
To 3800 mm
27
CR 7EE-C
Version with lateral driving system
Version with double telescopic rudder
CR 7EE-C with Cradle is fully electric truck that permits handling up to a max 700 mm diameter fabric rolls.
The outstanding characteristics of this truck are its handling ease and the reduced requested maneuvering
spaces. All the functions are located in the rudder and can thus be handled by a single operator.
The electric functions assist the operator in the various phases of loading/unloading and transport. The
throttle potentiometer device positioned on the guide rudder permits the variation of the speed control along
2 ranges while a micro-switch automatically reduces the speeds during the approach phase to the loom.
Reed Width
Fabric Roll Diameter
From 1200 mm
700 mm
550 Kg
To 3800 mm
28
CR 7E-C
The CR 7E-C is a cloth truck for manual transport and with electric lifting.
The central wheel insures a proper tracking and steering of the truck and the push buttons allow the lifting
and lowering of the cradle.
The CR 7E-C with Cradle is ideal for the transport of cloth rolls up to 700 mm in diameter. The load-handling
operations are controlled by one single operator by means of push buttons situated on the guiding bar.
Reed Width
From 1200 mm
700 mm
550 Kg
To 3800 mm
29
CR 7-C
The lifting of the cradle is managed by a sized manual pump to permit the operator’s reasonable efforts.
Reed Width
From 1200 mm
700 mm
550 Kg
To 3800 mm
30
CR 6EE-C
The outstanding characteristics of this truck are its handling ease and the reduced requested manoeuvering
2 ranges while a microswitch automatically reduces the speeds during the approach phase to the loom.
Reed Width
From 1200 mm
600 mm
450 Kg
To 3800 mm
31
CR 6E-C
Reed Width
From 1200 mm
600 mm
450 Kg
To 3800 mm
32
CR 6-C
Reed Width
From 1200 mm
600 mm
450 Kg
To 3800 mm
33
CR 5EE-C
The outstanding characteristics of this truck are its handling ease and the reduced requested manoeuvering
2 ranges while a microswitch automatically reduces the speeds during the approach phase to the loom.
Reed Width
From 1200 mm
500 mm
350 Kg
To 3800 mm
34
CR 5E-C
Reed Width
From 1200 mm
500 mm
350 Kg
To 3800 mm
35
CR 5-C
Reed Width
From 1200 mm
500 mm
350 Kg
To 3800 mm
36
CR 4
The manual trucks CR 4 allows to transport cloth rolls with max. diameter 400 mm. The lifting of the cradle is
managed by a manual hydraulic pump.
Reed Width
From 1200 mm
400 mm
160 Kg
To 3800 mm
37
ET SUP-DOR-Z
The ET SUP-DOR –Z, AC TECHNOLOGY, permits the lifting and transport contemporaneously of the bottom beam, the top beam and
the entire harness group, at the same time, offering extremely rapid and sure operation of quick style change. All the operations are
managed by a single operator simply and quickly.
Reed Width
Flange Diameter
Bottom beam Max. weight capacity
Upper beam Max. weight capacity
From 1900 mm
From 800 mm
From 1000 Kg
From 700 Kg
To 4000 mm
To 1000 mm
To 1300 Kg
To 1000 Kg
38
ET SUP-SOM-Z
The ET SUP-SOM-Z, AC TECHNOLOGY, satisfies the needs to lift and transport contemporaneously the
top beam and bottom beam. Electronic management of the function guarantees the following of each
operation in complete safety and with high precision and without any physical effort on the part of the
operator.
Reed Width
Flange Diameter
Bottom beam Max. weight capacity
Upper beam Max. weight capacity
From 1900 mm
From 800 mm
From 1000 Kg
From 700 Kg
To 4000 mm
To 1000 mm
To 1300 Kg
To 1000 Kg
39
ET SUP-LF-Z
The ET SUP-LF-Z, AC TECHNOLOGY, is part of a family of electronic trucks. It is able to provide very agile
movements of either the top or the bottom warp beam in successive operations. The beam can be lifted from
the floor or relative supports by means of forks which guarantee a precise loading at the loom.
Reed Width
Flange Diameter
Max. Lifting height
From 1900 mm
From 800 mm
From 1000 Kg
To 4000 mm
To 1100 mm
To 2000 Kg
3000 mm
40
ET SUP-LL-Z
Data logger The ET SUP-LL-Z, AC TECHNOLOGY, is able to manage in successive phases the top beam or the bottom
beam. Lifting can be made from the floor or other supports by means of a cradle which is able to load both
weaving machines with bottom beams and with top and bottom beams. This truck is available in custom
versions to adapt to specific requirements of the customer.
Reed Width
Flange Diameter
Max. Lifting height
From 1900 mm
From 800 mm
From 1000 Kg
To 4000 mm
To 1100 mm
To 2000 Kg
2900 mm
41
ET SUP-LAN-Z
The ET SUP-LAN, AC TECHNOLOGY, is the most versatile and functional truck of the Ferber line. It permits
the lifting of the beam from any position and transport of it to magazine storage or insertion at the loom, lifting
up to a height 4900 mm. A particular advantage is the total digital management of all the functions with the
latest generation of technology which permits movement of the truck following the trajectory most ideal for
the required operations.
Reed Width
Flange Diameter
Max. Lifting height
From 1900 mm
From 800 mm
From 1000 Kg
To 5400 mm
To 1250 mm
To 3000 Kg
4900 mm
42
ET SUP-Z
The ET SUP-Z, AC TECHNOLOGY, is a complete solution for the transport and lifting of warp beams and
cloth rolls. The functions are controlled by digital circuits which insure precise and safe operation. The truck
is able to lift the load from the floor and center it very precisely during unloading by means of forks that can
be directed over 4 axes and has a lifting height up to 4900 mm.
Reed Width
Flange Diameter
Max. Lifting height
From 1900 mm
From 800 mm
From 1000 Kg
To 5400 mm
To 1200 mm
To 2000 Kg
4900 mm
43
ET SUP-SRL-Z
ET SUP-SRL-Z, AC TECHNOLOGY, truck belongs to the family of the electronic trucks. Especially studied
for "Raschel" looms, it simplifies the handling, loading and unloading of the beams from the special supports.
The taking of the full beam can take place both from the ground and from relatively risen supports, using
belts for slinging the beam. All the operations are handled by a single operator easily and quickly.
Reed Width
Flange Diameter
Max. Lifting height
From 1900 mm
From 800 mm
From 700 Kg
To 5400 mm
To 1250 mm
To 1000 Kg
2900 mm
44
ET W-Z
ETW –Z, AC TECHNOLOGY, is a fully electric truck. On account of the two motor-wheels the operator can
carry out easy maneouvres in limited space. Purposely studied for looms manufacturing carpets, it makes
the beam handling, the loading and unloading easier. The loading from the ground is ensured by special
forks. All the operations are carried out by a single operator easily and quickly.
Reed Width
Flange Diameter
From 1400 mm
From 1500 Kg
To 2140 mm
To 1250 mm
To 2500 Kg
45
CL 9
The truck in its various versions grants an easy and handy transport of the harness mounting device group. It
is available in the electric or manual version.
Reed Width
From 1800 mm
From 150 Kg
To 5400 mm
To 400 Kg
46
BT2
The BT2 is a transport truck for large off-loom take-up rolls. Two moving side panels are hydraulicallycontrolled to load/unload the rolls and hold the rolls during transport. Available in different versions this truck
can be designed to meet customer requirements.
Reed Width
Max fabric roll Diameter
From 1400 mm
From 1500 Kg
To 5400 mm
To 1250 mm
To 3500 Kg
47
BZ2-Z
The BT2-Z, AC TECHNOLOGY, is a transport truck for large off-loom take-up rolls. Two moving side panels
are hydraulically-controlled to load/unload the rolls and hold the rolls during transport. Available in different
versions this truck can be designed to meet customer requirements.
Reed Width
Max fabric roll Diameter
From 1400 mm
From 1500 Kg
To 5400 mm
To 1600 mm
To 3500 Kg
48
BZesse-Z
The BZesse-Z, AC TECHNOLOGY, is ideal for lifting warp beams and very large cloth rolls from the floor,
from off-loom take-ups, or from other supports. The important characteristic of this truck is that it is able to lift
the load over obstacles in the cloth roll alley and transport cloth rolls with a diameter larger than the available
space in the alley. It is also able to transport and position top and bottom beams in the weaving machine.
Reed Width
Flange/cloth roll Diameter
Max. Lifting height
From 1900 mm
From 800 mm
From 700 Kg
To 5400 mm
To 1400 mm
To 3500 Kg
2300 mm
49
TRS 20-Z
AC technology version
The TRS 20-Z, available in DC or AC TECHNOLOGY, is the ideal solution for transporting carts with
maximum weight up to 3000 kilograms. With its characteristically-small footprint, it allows the movement of
loads easily in any situation thanks to the reduced maneuvering space requirements. It is designed with a
hydraulic arm with a ball hitch for a safe and secure attaching and transporting of carts.
Max. pulling capacity
Max. lifting capacity
Max. speed
3000 Kg
1500 Kg
4 Km/h
50
TRS 30-Z
AC technology version
The TRS 30-Z, available in DC or AC TECHNOLOGY, is the ideal solution for transporting carts with
maximum weight up to 4000 kilograms. With its characteristically-small footprint, it allows the movement of
loads easily in any situation thanks to the reduced maneuvering space requirements. It is designed with a
hydraulic arm with a ball hitch for a safe and secure attaching and transporting of carts.
Max. speed
4000 Kg
2000 Kg
4 Km/h
51
TRS 50-Z
The TRS 50-Z, AC TECHNOLOGY, is the ideal solution for transporting carts with maximum weight up to
5000 kilograms. With its characteristically-small footprint, it allows the movement of loads easily in any
situation thanks to the reduced maneuvering space requirements. It is designed with a hydraulic arm with a
ball hitch for a safe and secure attaching and transporting of carts.
Max. speed
5000 Kg
3000 Kg
4 Km/h
52
TRS 60-Z
The TRS 60-Z, AC TECHNOLOGY, is the ideal solution for transporting carts with maximum weight up to
8000 kilograms. With its characteristically-small footprint, it allows the movement of loads easily in any
situation thanks to the reduced maneuvering space requirements. It is designed with a hydraulic arm with a
ball hitch for a safe and secure attaching and transporting of carts.
Max. speed
8000 Kg
4000 Kg
4 Km/h
53
TRS eco-Z
full electric
The TRS eco-Z, AC TECHNOLOGY, is a mini-truck with electric motion and electric lifting, that
constitutes a record in minimum energy consumption. Ideal solution for transporting carts with maximum
weight up to 500 kilograms. With its characteristically-small footprint, it allows the movement of loads easily
in any situation thanks to the reduced maneuvering space requirements. It is designed with an electric arm
with a ball hitch for a safe and secure attaching and transporting of carts.
Max. speed
1000 Kg
500 Kg
4 Km/h
54
TCSL 20-Z
The TC SL-20-Z, AC TECHNOLOGY, is an electronic transpallet engineered for the movement of warp
beams. The forks are shaped to permit a drastic reduction in loading and unloading time. The design of the
driving head provides maneuverability to meet the most limited space requirements.
Reed Width
Flange Diameter
From 1500 mm
From 800 mm
From 1500 Kg
To 4000 mm
To 1600 mm
To 3000 Kg
55
TRM
The main characteristics of the TRM are its
compactness, agility, versatility and robustness. The
operator is able to handle all the phases of loading,
unloading and transport by using a guiding rudder. The
attaching and lifting phases are simple and precise
using a steel ball hitch and a hydraulic lifting arm.
manual
2000 Kg
56
CSV 1
Max. Flange Diameter
1016 mm
250 Kg
Max. Roll diameter
CSV1 for empty beams
450 mm
250 Kg
CSV1-AS for small fabric rollers
The CSV1 is a manual truck with foot-pedal scissor-lifting commanded by a hydraulic pump.
PL version, special for Suzuki warping machine, is also available.
57
CSV 2
1200 mm
350 Kg
Max. Roll diameter
450 mm
350 Kg
MANUAL TRUCK WITH PANTOGRAPH LIFTING CONTROLLED BY HYDRAULIC PISTON
CSV2 is ideal for empty beam handling, with taking on the core beam by means of a small cradle vertically
sliding.
AS version is suitable to transport small fabric rolls bolts with maximum diameter of 450 mm.
Easiness and a safe use make this truck essential for the empty or small fabric rolls taking and transport.
CSV2 allows to take the beams from the ground and from the loom.
The small cradle enables its horizontal rotation making the empty beam or small fabric roll taking easier
A locking position device enables the rotation direction to be locked, keeping the load in its transport
position.
The pedal pump placed under the driving handle makes the load lifting easier.
Safety is ensured by the loading limit regulator and the parachute valve.
The front fixed wheels guarantee the easy truck drive in the straight path whereas
PL version, special for Suzuki warping machine, is also available.
58
CSV 3
1600 mm
750 Kg
Max. Roll diameter
450 mm
750 Kg
MANUAL TRUCK WITH PANTOGRAPH LIFTING CONTROLLED BY HYDRAULIC PISTON
CSV3 is ideal for empty beam handling, with taking on the core beam by means of a small cradle vertically
sliding.
AS version is suitable to transport small fabric rolls bolts with maximum diameter of 450 mm.
Easiness and a safe use make this truck essential for the empty or small fabric rolls taking and transport.
CSV3 allows to take the beams from the ground and from the loom.
The small cradle enables its horizontal rotation making the empty beam or small fabric roll taking easier
A locking position device enables the rotation to be locked, keeping the load in its transport position.
The pedal pump placed under the driving handle makes the load lifting easier.
Safety is ensured by the loading limit regulator and the parachute valve.
The front fixed wheels guarantee the easy truck drive in the straight path whereas
59
STK systems
The STK is ideal for the storage of warp
beams in the weave room. By adding the
harness mounting group, the design
provides quick style change performance
keeping
all
the
harness
group
components staged for loom insertion.
The beam is held by rotating forks or
fixed supports or parallel rollers depending on the needs of the
customer.
60
JUMP CART
The JUMP CART is a small truck for personnel transport. The standing rider uses a steering rudder with
speed and direction controls. The small dimensions and the motor-wheel steering provide agile and quick
movements throughout the weaving mill.
61
AGV
AGV (Automated Guided Vehicles) Ferber has a ten year experience in the manufacturing of automation
plants with AGV trucks and can thus carry out customized projects of the whole weaving mill logistics
automation.
These automated guided vehicle systems have flexible and advanced navigation systems, and interface with
elevators, doors and lifters. It uses inertial guide technology with stops and crosses handled by codified
transponders.
One or more PCs typically control and supervise, by radio-modems, the whole handling system that can be
fully or semi automatic driven. AGV plants are normally interfaced with automatic storing systems, loading
and unloading tools and it is usually.
 Efficient automated material flow
 Reduce dependence upon manual labor
 Minimize potential for injuries
 Easily reconfigure changes in layout or function
Number of
axes
Memory:
controlled
Communication:
up to 16, driven through CANopen or Ethernet fieldbusses
64 Mbytes DRAM;
128 Kbytes CMOS memory with battery backEthernet channels (CoE - Can Over SoE -, Eoe -, TCP, UDP, TFTP,…
Canbus channels (DS301, DS401, DS402, Device Net,) to interface servo drives and
remoted I/O's
Profibus DP slave
O.P.C. Server and ActiveX available for communication in Windows en
Teleservice via modem/Ethernet
Intrinsic safety system
Monitor the CPU status
Clock calendar
62
OPTIONALS
Lithium-ion battery
A sealed Li-ion battery has a lower weight lower than lead battery. It does not require refilling of water.
Combined with AC motors makes the truck maintenance free
Characteristics of LiFePO4 batteries used in Ferber Electric Trucks:
1. Non-toxic, non-contaminating (no rare metals),
PVC cover, no pollution, environmentally friendly,
extremely safe
2. No explosions, no smoke, no fire under abusive
working conditions
3. CE, ISO9000 approved
4. Compared with SLA battery packs, LiFePO4 has a
longer service life of over 5-7 years
5. Discharges with higher power, more powerful than
SLA batteries with same capacities
6. Low self-discharge
7. Low inner resistance, easier to charge
8. Wide working temperature range(-20° ~ +75°)
9. Maintenance-Free
Solid state professional LED lights
Z*RF TRUCK data logger
The system fully enables all functions of truck only if a key is inserted with a code
belonging to a programmable set
The Z*RF DataLogger is a special device for FERBER trucks with sensors which
sound an alarm upon any impact exceeding a predefined threshold. Z*RF is
equipped with an inside sensor detecting truck bumps. Thresholds defining bump
intensity can be set: when a threshold is exceeded, Z*RF can also store bump
intensity and direction.
• All details of any events, like bumps, time setting, and failures are reported on
the display and record the event details, such as date, time, and driver
identification. The data is then transmitted wirelessly by RF. This immediate
identification allows for more timely corrective action and reinforces safe operations. These user interfaces
also assist in controlling access by ensuring that only trained or certified drivers operate the equipment.
In the more simple version an USB port allows data to be downloaded from device on a PC.
Software allows for the management of data concerning the whole truck fleet, showing all events for each
key and calculating statistics from collected data day by day and operator by operator.
63
Battery data logger
Sending battery data to a PC
Through the IR adapter all data are sent to the PC program, which makes it possible to display them in form
both of working cycles and diagrams.
In addition the device offers tools to analyze battery efficiency, effectiveness of the charging process and
way to use.
displaying working cycles
Storage of 200 working cycles
(discharge/charge)
• Discharge time and capacity
• Reinstated capacity and charging
time
• Battery faults and failures occurring
during the charging process
Operating voltage and charging
current diagram
• Date and times of the charging cycle
• Zoom function to display details
Safety video system for ETSUP and long trucks
Touch Screen on the rudder
Battery Quick Change System
64
Wireless radio remote control
65
Automatic lubrication
Electronic Oils pressure control
66
Ferber® and Ferber Textile Solutions ®
Sono marchi registrati di:/ are registered Trade Marks owned by: / sont des marques déposées
appartenant à: sind eingetragene Warenzeichen von Besitz; / ‫ﻳﺘﻢ ﺗﺴﺠﻴﻞ اﻟﻌﻼﻣﺎت اﻟﺘﺠﺎرﻳﺔ اﻟﺘﻲ ﺗﻤﻠﻜﻬﺎ‬
son marcas registradas propiedad de: / são marcas registradas de propriedade da / marka sahibi
kayıtlıdır: /являются зарегистрированными товарными знаками, принадлежащими компании;
GIOBBE S.r.l.,
Via Primo Maggio, 33 - 23873 Missaglia – Italy
email: info@giobbeautomation.com
P.IVA-VAT 01665640130
Technical Assistance: ferberassistenza@giobbeautomation.com
67

ET 2001-QSC-Z - Agent Tekstil

Transcription

Similar documents

$6,300 - Zwolle Tamale Fiesta

climacab® electric apu installed at international

Crane Trucks

SAT., JUNE 20, 2015 • 10 AM - Wilson Real Estate and Auction

Softub Brochure - A Hot Tub Place

nexAir, LLC is a supplier of high-‐quality industrial, specialty

Saving Fuel For The Long-Haul

Truck Stop Electrification Saving Fuel for the Long-Haul

GRUE TOUT-TERRAIN DE 1500 TONNES PRÈS DE LA CHUTE

Monster Truck - $4900 (Jackson, Wi)