Program - 大阪大学小宮山グループ [Prof. Komiyama`s Group, Osaka

Transcription

Program
Osaka International Convention Center (Grand Cube Osaka)
November 13-18, 2011
Sponsored by
Collaborated with
Gas Turbine Society of Japan
Supported by the Commemorative Organization
for the Japan World Exposition ('70)
http://www.gtsj.org/
INTERNATIONAL GAS TURBINE CONGRESS 2011 OSAKA
NOVEMBER 13-18, 2011
Sponsoring Society
Gas Turbine Society of Japan (GTSJ)
Collaborating Societies
ASME International Gas Turbine Institute
(ASME/IGTI)
European Turbine Network (ETN)
The Institute of Mechanical Engineers (IMechE)
The Japan Society for Aeronautical and Space
Sciences (JSASS)
The Japan Society of Mechanical Engineers
(JSME)
Korean Fluid Machinery Association (KFMA)
The Korean Society of Mechanical Engineers
(KSME)
Société Française des Mécaniciens (SFM)
Verein Deutscher Ingenieure (VDI)
Italian Union of Thermal-Fluid Dynamics (UIT)
Cooperative Societies
The Visualization Society of Japan (VSJ)
Thermal and Nuclear Power Engineering Society
(TENPES)
Japan Society for the Promotion of Machine
Industry (JSPMI)
International Electric Research Exchange (IERE)
Society of Automotive Engineers of Japan (JSAE)
Turbomachinery Society of Japan (TSJ)
Engineering Research Association for Supersonic
Transport Propulsion System (ESPR)
The Federation of Electric Power Companies of
Japan (FEPC)
The Center for Promotion of Natural Gas (CPNG)
The Japan Institute of Energy (JIE)
Japan Society of Energy and Resources (JSER)
The Japan Gas Association (JGA)
The Japan Institute of Metals (JIM)
The Society of Japanese Aerospace Companies
(SJAC)
Japanese Aero Engines Corporation (JAEC)
The Society of Materials Science, Japan (JSMS)
The Ceramic Society of Japan (CerSJ)
The Japan Electrical Manufacturers' Association
(JEMA)
Heat Transfer Society of Japan (HTSJ)
Japan Internal Combustion Engine Federation
(JICEF)
Combustion Society of Japan (CSJ)
Institute for Liquid Atomization and Spray
Systems (ILASS-Japan)
Japan Fine Ceramics Association (JFCA)
Japan Institution of Marine Engineering (JIME)
Japan Land Engine Manufacturers Association
(LEMA)
International Advisory Committee
Prof. Tony Arts (Belgium)
Prof. Frans A. E. Breugelmans (Belgium)
Prof. Rene Van den Braembussche (Belgium)
Prof. Chen Naixing (China)
Prof. Huang Weiguang (China)
Prof. Sun Xiaofeng (China)
Dr. Jean-Jacques Thibert (France)
Prof. Dieter E. Bohn (Germany)
Prof. Joerg R. Seume (Germany)
Dr. Sane Shrikrishna Kashinath (India)
Prof. Aristide F. Massardo (Italy)
Prof. Shin-Hyoung Kang (Korea)
Dr. Dae-Sung Lee (Korea)
Prof. Mikhail Ja Ivanov (Russia)
Prof. Reza S. Abhari (Switzerland)
Prof. John D. Denton (UK)
Prof. Ann P. Dowling (UK)
Prof. Dilip R. Ballal (USA)
Prof. Edward M. Greitzer (USA)
Dr. Chunill Hah (USA)
Prof. Wing F. Ng (USA)
Prof. Terrence W. Simon (USA)
Dr. David C. Wisler (USA)
Financial Supporters
Commemorative Organization for the Japan
World Exposition '70
Federation of Electric Power Companies
The Japan Gas Association
Osaka Convention & Tourism Bureau
CONTENTS
1. WHOLE CONGRESS TIME TABLE ································································································ 4
2. GENERAL INFORMATION ··············································································································· 5
3. REGISTRATION & FEES··················································································································· 5
4. PLENARY SESSIONS, FORUMS & PANELS ··············································································· 6
5. SEMINAR & EXHIBITIONS ··············································································································· 7
6. SOCIAL PROGRAMS & PLANT TOURS ······················································································· 8
7. CONGRESS OFFICE ························································································································· 9
8. SESSION PROGRAM ······················································································································ 10
9. ORGANIZING COMMITTEE ··········································································································· 30
10. EXECUTIVE COMMITTEE··············································································································· 31
11. INFORMATION OF GAS TURBINE SOCIETY OF JAPAN (GTSJ) ·········································· 33
12. ACCESS TO & FLOOR GUIDE OF CONGRESS VENUE ························································· 36
MESSAGE FROM
GTSJ PRESIDENT
On behalf of the Gas Turbine Society of Japan, GTSJ, I am very pleased to welcome all the
participants of the International Gas Turbine Congress 2011 Osaka.
The GTSJ has been providing up-to-date information on all aspects of gas turbine technologies
through various conferences for 40 years. One of the most important activities among them has been
to host the International Gas Turbine Congress every four years with the support of collaborating
societies all around the world.
The International Gas Turbine Congress, IGTC, was first held in 1971 in Tokyo. Since then, a series of
nine congresses has been held in Japan. A large number of people from academia, industry, and
government have participated in these congresses from various areas of the world and presented the
results of their research and experiences. The IGTC’11 is the tenth international congress organized by
GTSJ and continues the tradition of the previous nine congresses held in Japan.
Gas turbine and related technologies have greatly advanced in the last decade thanks to improvements
in the efficiency, reliability, and cleanness of exhaust emissions. The research and development
activities of advanced gas turbine systems are underway for the next generation. In addition, especially
after the Tohoku-Kanto Earthquake and Tsunami Disaster, the gas turbine has attracted much
attention as a feasible platform to be used in highly efficient emergency electric generators. Under
these circumstances, I believe that this international congress is a timely and beneficial event, allowing
participating researchers and engineers from various areas of the world to exchange information on
the latest research and technical achievements.
Finally, my sincere gratitude is extended to the collaborating and cooperative societies, the members
of the International Advisory Committee, the supporting foundations, and the corporate members of
the Gas Turbine Society of Japan for their contributions in making this congress possible. Special
thanks are also directed to the members of the Organizing Committee and the Executive Committee
for their great effort in the preparation of the congress.
Yasukata Tsutsui
President
Gas Turbine Society of Japan
2
MESSAGE FROM
IGTC '11 OSAKA CHAIRS
On behalf of the organizing committee and executive committee of IGTC’11, we would like to extend
our warmest welcome to all participants of IGTC’11 Osaka. We are extremely delighted to host IGTC
for the first time in Osaka. Osaka is Japan’s second largest economic area in close proximity to other
major urban and tourist centers including Kyoto, Nara and Kobe.
IGTC’11 is the 10th anniversary congress since the first IGTC was held by JSME supported by the
Gas Turbine Division of ASME in 1971. We celebrate this honorable occasion of IGTC’11 with a
special invited lecture by Professor Eisuke Outa and a special exhibition of past IGTCs including
memorial photographs organized by Professor Osamu Kawaguchi.
In response to our announcement by the 1st circular, 251 extended abstracts were received from more
than 20 countries. Even though the Higashi Nippon disaster occurred on 11 March, 2011, 192 papers
were selected for presentation at IGTC’11. Two invited lectures and seven keynote speeches are to be
delivered by world leading experts. Two panel sessions on “Trends in Aero Engine and CO2
Reduction”, and two forums on “Aero Engine and Asian Energy and Environmental Strategy” are
also scheduled.
We are indebted to all reviewers for reviewing the draft papers, to the members of International
Advisory Committee, Organizing and Executive Committee for their greatest efforts in preparing and
operating IGTC’11 successfully. We also wish to acknowledge the generous support from
collaborating societies, sponsors and exhibitors. Without these contributions, fruitful success of
IGTC'11 would not be achieved.
It will be our great pleasure that IGTC’11 provides a valuable social gathering for better understanding
gas turbine technologies, exchanging updated information and making further progress, and growing
our friendship. We would be very happy to see all participants enjoy IGTC’11 and the beautiful
autumn in Kansai.
Haruo Yoshiki
Ken-ichiro Takeishi
Chairman
Organizing Committee of
IGTC '11 Osaka
Chairman
Executive Committee of
IGTC '11 Osaka
3
1. WHOLE CONGRESS TIME TABLE
Nov.13
(Sun)
Nov.14
(Mon)
Nov.15
(Tue)
Nov.16
(Wed)
Nov.17
(Thu)
Nov.18
(Fri)
Morning
Afternoon
Evening
Registration (Foyer, 12F) : 17:00-20:30
Welcome Reception (Conf. Hall, 12F) : 18:30-20:30
Morning
Afternoon
Evening
Registration (Foyer, 12F) 9:00-18:00
Exhibition 11:30-17:00 (Rooms #1001, 1002, and 1003, 10F)
Student Exhibition & Retrospective Exhibition of IGTC
12:00-17:00 (Room #1010, 10F)
Opening Address
Lunch Break 13:10-14:30
9:30-9:40 (Conf. Hall, 12F)
Special Talk 2
Gas Turbine Open
14:30-16:00 (Conf. Hall, 12F)
Plenary Talk 1
Seminar
Technical Sessions
9:40-10:10 (Conf. Hall, 12F)
(in Japanese)
14:30-16:00 (7 Rooms, 10&12F)
17:00-18:30 (Conf.
Award of Honorary Membership
Hall, 12F)
Break 16:00-16:20
10:10-10:20 (Conf. Hall, 12F)
Plenary Invited Lecture 1
Technical Sessions
10:20-11:20 (Conf. Hall, 12F)
16:20-17:50 (7 Rooms, 10&12F)
Special Talk 1
11:40-13:10 (Conf. Hall, 12F)
Technical Sessions
11:40-13:10 (6 Rooms, 10&12F)
Morning
Afternoon
Evening
10:00-17:00 (Room #1010, 10F)
Lunch Break12:50-14:30
Technical Sessions
9:30-11:00 (8 Rooms, 10&12F)
14:30-15:30 (Conf. Hall, 12F)
Break 11:00-11:20
Break 15:30-15:50
Technical Sessions
Panel Discussion 1
11:20-12:50 (8 Rooms, 10&12F)
15:50-17:50 (Conf. Hall, 12F)
Morning
Afternoon
Evening
10:00-17:00 (Room #1010, 10F)
Banquet
Technical Sessions
Rihga Royal Hotel
9:30-11:00 (8 Rooms, 10&12F)
19:00-21:30 (Room
14:30-15:30 (Conf. Hall, 12F)
Sanraku, 2F)
Break 11:00-11:20
Break 15:30-15:50
Forum 1
Technical Sessions
15:50-17:00 (Conf. Hall, 12F)
11:20-12:50 (11:05-12:50) (8 Rooms,
Plenary Talk 2
10&12F)
17:00-17:50 (Conf. Hall, 12F)
Morning
Afternoon
Evening
10:00-14:00 (Room #1010, 10F)
Closing Address
Technical Sessions
17:50-18:30
9:30-11:00 (9:30-11:15) (8 Rooms,
Forum 2
(Conf. Hall, 12F)
10&12F)
14:00-15:30 (Conf. Hall, 12F)
Break 11:00-11:20
Break 15:30-15:50
Technical Sessions
Panel Discussion 2
11:20-12:50 (7 Rooms, 10&12F)
15:50-17:50 (Conf. Hall, 12F)
Plant Tours
4
2. GENERAL INFORMATION
for tourism will be available at the Congress
Registration Desk, as well as the bureau's web site
(http://www.osaka-info.jp/jp/) in English, Chinese,
Thai, Korean, and Japanese.
2.1 Language
The official language of the Congress is English.
2.2 Registration Desk
Congress Registration Desk will be open at the
times and place indicated below:
Nov. 13 (Sun) 17:00-20:30
Nov. 14 (Mon) 9:00-18:00
Nov. 15 (Tue)
9:00-18:00
Nov. 16 (Wed) 9:00-18:00
Nov. 17 (Thu)
9:00-15:00
in the foyer of 12F.
2.6 Cloakroom
A cloakroom will be open in the foyer of 12F during
the following periods. Coats and luggage can be
stored there free of charge.
Nov. 13 (Sun) 16:00-21:00
Nov. 14 (Mon) 8:00-19:00
Nov. 15 (Tue)
9:00-18:30
Nov. 16 (Wed) 9:00-18:30
Nov. 17 (Thu)
9:00-19:00
2.3 Information for Speakers and
Chairpersons
Speaker's Meeting
There will be a short meeting among the
chairpersons and speakers just before each session.
The speakers and chairpersons are requested to
arrive at the session room 10 minutes before the
session start.
Timing of Presentations
Each general paper will be allotted 30 minutes,
including 10 minutes for introduction and
question-and-answer period. A keynote paper will
be allotted 45 minutes.
Speakers' Practice
A room (#1201, 12F) will be reserved for speakers
who wish to check their slides and to practice. A PC
projector, power supply, and Internet connection
will be available.
Audio Visual Equipment
Each session room is equipped with a Windows
laptop PC with Microsoft Office (including
Microsoft PowerPoint), a PC projector, a screen, a
laser pointer, and microphones. Speakers are
advised to check their presentation materials in
advance of presentations.
2.7 Official Agents
The official agents of IGTC'11 are e-side, inc.
(http://en.e-side.co.jp/) in charge of collecting papers,
administering registration and bank transfers, and
JTB TOKYO Business World Tokyo Corp.
(http://www.jtbbwt.com/) in charge of credit card
settlement and providing the online registration
service, "AMARYS".
For further information on registration and
payment, please contact the Yokohama Branch of
e-side, inc. (c/o Ms. Kana Ohta and Mr. Scott
Macdonald).
E-mail: igtc2011-office＠e-side.co.jp
Tel: 81-45-534-3881
Fax: 81-45-534-3882
3. REGISTRATION AND FEES
3.1 Registration Fees
All participants are required to register and pay
registration fees according to the categories in Table
1. The registration fee includes a badge to access all
sessions of the congress, the welcome reception,
coffee breaks, and electronic proceedings (USB
flash memory).
Those who wish to participate in the congress
banquet on Wednesday and a plant tour on Friday
are requested to register and pay additional fees for
participation. The additional fees are 10,000 JPY for
banquet, and 7,000 JPY for a tour, respectively.
These additional fees are shown in Table 2.
Pre-registration before October 1, 2011 is
requested for at least one speaker for each technical
paper. Papers will be excluded from the proceedings
and the final program unless the executive
committee of IGTC '11 confirms the speaker's
pre-registration.
2.4 Congress Venue
The congress venue is Osaka International
Convention Center (Grand Cube Osaka, GCO)
located in Nakanoshima business district of Osaka
city. For more information on the venue, please visit
GCO's web site at http://www.gco.co.jp/en/.
2.5 Information for Tourism
Information for tourism is available at the web site
of Osaka Convention & Tourism Bureau, and other
organizations. Brochures, maps and other materials
5
Table 1 Registration Fee
Category
Pre-registration
before Nov. 1, 2011
Speaker
55,000 JPY
Regular-registration after
Nov. 2, 2011, and on site
Pre-registration is
compulsory
55,000 JPY
65,000 JPY
15,000 JPY
60,000 JPY
70,000 JPY
15,000 JPY
Member
*1
Non-member
Student
A printout of confirmation e-mail or fax will be
requested to be presented at the desk.
4. PLENARY TALK, PLENARY INVITED
LECTURES, SPECIAL TALKS, PANEL
DISCUSSIONS, & FORUMS
4.1 Plenary Talk
Conference Hall
PLENARY TALK 1
November 14 (Mon) 9:40-10:10
Recollection on the Progress of IGTC over 40 years
Prof. Eisuke Outa (Waseda University, Japan)
Chair: Osamu Kawaguchi (Professor emeritus, Keio
University, Japan)
PLENARY TALK 2
November 16 (Wed) 17:05-17:50
Europe's Framework Programme for Research in
the Field of Aeronautics and Air Transport
Dr. Remy Denos (EU Commission, Belgium)
Chair: Toshinori Watanabe (The University of
Tokyo, Japan)
*1 Members of GTSJ, the collaborating or the cooperative societies listed
on the end leaf.
Table 2 Additional Fee*2
*2
Item
Banquet
Plant Tour
Price
10,000 JPY/person
7,000 JPY/person
Participants of the banquet and the plant tours must be registered
participants or accompanying persons.
3.2 Online Registration (in advance)
Online registration is accepted at the Congress
Registration Desk (online) at
https://amarys-jtb.jp/igtc2011/ .
Payment should be made by bank transfer or a
major credit card (VISA, AMEX, Diners, or JCB).
The bank details for bank transfer are:
4.2 Plenary Invited Lectures
Conference Hall
PLENARY INVITED LECTURE 1
November 14 (Mon) 10:20-11:20
NASA's Future Propulsion Systems Research and
Development
Mr. Ramon Lugo (Director of NASA Glenn
Research Center, USA)
Chair: Chunill Hah (NASA Glenn Research Center,
USA)
November 15 (Tue) 14:30-15:30
Advanced Aeroengine Technologies to Reduce the
Effect of Aviation on the Environment
Prof. Richard J. Parker (Director of Research and
Technology, Rolls-Royce Group, UK)
Chair: David Koyama (Rolls-Royce Japan, Japan)
November 16 (Wed) 14:30-15:30
How to Develop Sustainable Low-Carbon Society
(LCS) for Japan and Asian Countries? -Model
Simulation and RoadmapDr. Junichi Fujino (National Institute for
Environmental Studies, Japan)
Chair: Toshihiko Nakata (Tohoku University, Japan)
Bank Name: Sumitomo Mitsui Banking Corporation,
Branch Name : Akasaka Branch (Branch number : 825),
Swift Code: SMBCJPJT,
Account Type: Savings Account,
Account No.: 8895874,
Account Name: IGTC11 Registration Desk (Hidekazu
Arai, President).
If paying by credit card, the congress agent for the
online payment, "JTB Internet Settlement
(AMARYS)" (in English) or "JTB インターネット決
済(アマリス)" (in Japanese) will appear on your
credit card statement.
Online registration will be accepted until 17:00 of
November 4, 2011 (JST).
3.3 On-site Registration
On-site registration will be accepted at the Congress
Registration Desk shown in subsection 1.2. Major
credit cards or cash (JPY) will be accepted for
payment.
3.4 Congress Kit
All participants including those who have registered
in advance are requested to come to the desk to
receive a congress bag containing a badge, a copy of
program and an electronic proceedings on USB
flash memory with ISBN number.
6
Term Strategy)
Panelist: Dr. Kenneth L. Suder (NASA Glenn
Research Center, USA), Dr. Remy Denos (European
Commission, Belgium), Dr. Toshio Nishizawa
(Japan Aerospace Exploration Agency, Japan)
Tokyo, Japan)
Organizer: Toshinori Watanabe (The University of
Tokyo, Japan), Atsushi Makino, Keiichi Okai (Japan
Aerospace Exploration Agency, Japan), Kuniyuki
Imanari (IHI, Japan)
Forum 2
November 17 (Thu) 14:00-15:30
Asian Energy and Environmental Strategy
Panelist: Dr. Feng Lin (Chinese Academy of
Sciences, China), Mr. Xueyou Wen (Harbin Marine
Boiler & Turbine Research Institute, China), Prof.
Tong Seop Kim (Inha University, Korea), Dr. Atsushi
Kurosawa (The Institute of Applied Energy, Japan)
Chair: Seung Jin Song (Seoul National University,
Korea), Weiguang Huang (Chinese Academy of
Sciences, China)
Tokyo, Japan)
4.3 Special Talks
Conference Hall
Special Talk 1
November 14 (Mon) 11:40-13:10
Learn to Think Like an Expert
Dr. David C. Wisler (GE Aviation, retired, USA)
Chair: Yoshinaka Tsukasa (Pratt & Whitney Canada,
retired, Canada), Watanabe Toshinori (The
University of Tokyo, Japan)
Special Talk 2
November 14 (Mon) 14:30-16:00
My Hope in Young Gas Turbine Professionals
-Approach to Technical OpportunitiesMr. Tsukasa Yoshinaka (Pratt & Whiteney Canada,
retired, Canada)
Chair : David C. Wisler (GE Aviation, retired, USA)
Yukio Otsuki (Kawasaki Heavy Industries, Japan)
4,4 Panel Discussions
Conference Hall
Panel Discussion 1
November 15 (Tue) 15:50-17:50
Trends in Aero Engine Technology Associated with
Environmental Issues and CO2 Reduction (Shortand Mid-Term Strategy)
Panelist: Mr. Shigehiko Yamaguchi (JCAB, MLITI,
Japan), Prof. Richard J. Parker (Rolls-Royce, UK) ,
Dr. Alan Epstein (Pratt & Whitney, USA), Dr.
Hidekazu Kodama (IHI, Japan), Mr. Tohru Saito
(JAL, Japan), Mr. Toshihiko Noguchi (ANA, Japan),
Observer: Mr. Takayuki Kanai (METI, Japan)
Tokyo, Japan)
Tokyo, Japan), Atsushi Makino, Keiichi Okai (Japan
Aerospace Exploration Agency, Japan), Kuniyuki
Imanari (IHI, Japan)
Panel Discussion 2
November 17 (Thu) 15:50-17:50
CO2 Reduction in Power Plants
Panelist: Prof. Reza S. Abhari (ETH, Switzerland), Dr.
Koji Toyama (Kansai Electric Power, Japan),
Mr. Kensuke Suzuki (Toshiba, Japan)
Organizer: Toshihiko Nakata (Tohoku University,
Japan)
5. SEMINAR & EXHIBITIONS
5.1 Gas Turbine Open Seminar
Lectures for students and ordinary citizens on the
basics and latest issues related to gas turbine (jet
engine and industrial) will be given by three
prominent speakers, Mr. Tatsukasa Yoshinaka (Pratt
& Whitney Canada, retired, Canada), Professor
Toshinori Watanabe (The University of Tokyo,
Japan), and Dr. Hisao Futamura (Japan Aerospace
Exploration Agency, Japan).
Neither expertise nor registration will be required
to participate only in this seminar. The seminar will
start 17:00 on November 14, Monday in the
Conference Hall (12F). The facilitator of the
seminar is Osamu Nozaki (Japan Aerospace
Exploration Agency).
5.2 Retrospective (Memorial) Exhibition of
IGTC
Photographs, documents related to this series of
conferences over 40 years will be exhibited in
Room #1011 (10F). The exhibition is organized by
mainly Osamu Kawaguchi (Professor emeritus,
Keio University, Japan).
4,5 Forums
Conference Hall
Forum 1
November 16 (Wed) 15:50-17:00
Trends in Aero Engine Technology Associated with
Environmental Issues and CO2 Reduction (Long
5.3 Student Exhibition
Exhibitions by university and technical college
7








students will be made in Room #1011 (10F). The
exhibition is organized by mainly Nobuhiko
Yamasaki (Kyushu University, Japan).
The participating groups are:
 Turbomachinery Laboratory (Kawata Lab.),
Osaka Institute of Technology
 Jet Propulsion Laboratory (Watanabe and
Himeno Lab.), The University of Tokyo
 Thermal Science and Engineering Area
(Takeishi and Komiyama Lab.), Osaka
University
 Fluid Engineering and Turbomachinery
Laboratory (Ohta Lab.), Waseda University
 Computational Fluid Dynamics Laboratory
(Yamamoto Lab.), Tokyo University of Science
 Combustion and Propulsion Laboratory (Yuasa
Lab.), Tokyo Metropolitan University
 Reacting Fluid Laboratory (Hayashi Lab.) and
Fluid Engineering Laboratory (Tsujita Lab.),
Hosei University
 Aerospace Propulsion Laboratory (Yamasaki
Lab.), Kyushu University
 Fluids Engineering Research Group (Tsujimoto
Lab.), Osaka University
 Heat Transfer and Fluid Engineering
Laboratory (Honami Lab.), Tokyo University
of Science
 Aerospace Research Division (Funazaki Lab.),
Iwate University
 Fluids Engineering Science Laboratory
(Furukawa Lab.), Kyushu University
 Mathematical Modeling and Co mputation
Laboratory (Yamamoto and Sasao Lab.),
Tohoku University
 Thermal Engineering Laboratory (Yoshida,
Iwai and Saito Lab.), Kyoto University.



























5.4 (Corporate) Exhibition
An exhibition related to gas turbines, turbochargers
and
their
accessories,
parts,
materials,
instrumentation, application software, etc. will be
held concurrently in the exhibition hall (Room
#1001-1003, 10F). A brochure in both English and
Japanese including a floor guide and a list of the
exhibitors will be handed to visitors at the entrance
of the hall. Neither admission fee nor registration
will be required to have access to this part.
The exhibitors are:
 Aikoku Alpha Corporation
 Atsuita Press Industry Co., Ltd.
 B&B - AGEMA
 Bruel & Kjaer Japan
Concurrent Nippon Corporation
Daiichi System Engineering Co., Ltd.
Eagle Industry Co., Ltd.
Everloy Shoji Co., Ltd.
Fuji Techno Industries Corporation
General Electric International Inc.
Hitachi, Ltd.
Honda R&D Co., Ltd. Aircraft Engine R&D
Center
IHI Castings Co., Ltd.
IHI Corporation
Japan Aerospace Exploration Agency
Japan Air Tec Co., Ltd.
Japanese Aero Engines Corporation
Kawasaki Heavy Industries, Ltd.
Maruwa Electronic Incorporated
Maruyama Excell Co., Ltd.
Mitsubishi Heavy Industries Precision Casting
Co., Ltd.
Mitsubishi Heavy Industries, Ltd.
National Institute of Advanced Industrial
Science and Technology
Nippon Muki Co., Ltd.
Ohmura Manufacturing Co., Ltd.
Ohte Giken, Inc.
Reaction Design Japan KK
Rotadata Ltd.
Sankyo International Corporation
Shinkawa Electric Co., Ltd.
Shinwa Corporation
Softinway, Inc.
Spraying Systems Co., Japan
Toshiba Corporation
Tyco Thermal Controls Corporate
Uemura Giken Co., Ltd.
Vinas Co., Ltd.
Wood Group
Woodward Governor (Japan), Ltd.
6. SOCIAL EVENTS & TOURS
6.1 Welcome Reception
All participants and accompanying persons
registered will be invited to attend the Welcome
Reception to be held in the Conference Hall (12F)
from 18:30 to 20:30 on November 13, Sunday (no
additional fee required).
6.2 Banquet
The banquet will be held in Room Sanraku, Rihga
Royal Hotel (2F) from 19:00 to 21:30, November
16, Wednesday. Those who wish to participate in the
8
banquet are required to register and pay an
additional fee of 10,000 JPY/person. The banquet
will be in a buffet style, and a variety of vegetarian
dishes will be available. Japanese traditional
instrumental music by koto will be performed
during the banquet.
6.3 Plant Tours
The following two plant tours are planned on
November 18, Friday. Those who wish to
participate in these are required to register and pay
an additional fee of 7,000 JPY/person in advance.
Please note that all the applicants to the tours will be
screened by the hosting companies, and that not all
participants will be accepted.
Documents describing details of these tours will
be handed to the applicants registered at the
Registration Desk (Foyer, 12F).
(1) Tour 1 (LNG Gas Plant & Power Station)
This tour will be headed for Senboku LNG Power
Plant of Osaka Gas and Sakaiko Power Station of
Kansai Electric Power. The tour bus will depart
from the congress venue (Grand Cube Osaka) on
8:30.
(2) Tour 2 (Gas Turbine Manufacturing Plants)
This tour will be headed for two major gas turbine
manufacturing plants, Takasago Machinery Works
of Mitsubishi Heavy Industries and Akashi and
Seishin Works of Kawasaki Heavy Industries. The
tour bus will depart from the congress venue (Grand
Cube Osaka) on 8:00.
7. CONGRESS OFFICE
The Congress Office will be set in the GTSJ
Secretariat on 12F (next to Room #1203).
9
8. SESSION PROGRAM
8.1 Session Program at a Glance
Nov.14 (Mon.)
9:30-9:40
9:40-10:10
10:10-10:20
10:20-11:20
11:20-11:40
11:40-13:10
13:10-14:30
14:30-16:00
16:00-16:20
16:20-17:50
17:00-18:30
Conference Hall (12F)
Opening Address
Plenary Talk 1
Recollection on the Progress of IGTC over 40 Years
Prof. Eisuke Outa (Waseda University, Japan)
Chair: Osamu Kawaguchi (Keio University, Japan)
Award of Honorary Membership
NASA's Future Propulsion Systems Research and Development
Mr. Ramon Lugo (Director of NASA Glenn Research Center, USA)
Chair: Chunill Hah (NASA Glenn Research Center, USA)
Break
Room
Room
Room
Room
Room
Room
1202
1009
1008
1007
1006
1005
Special Talk 1 :
Learn to Think like an
Expert
AD(7)
HT(1)
HT(10)
CB(6)
SV(1)
MT(1)
Dr. David C. Wisler (GE
Aviation, USA)
Lunch Break
Special Talk 2:
My Hopes in Young
Gas Turbine
Professionals
AD(8)
HT(2)
HT(11)
CB(7)
SV(2)
MT(2)
Mr. Tsukasa Yoshinaka
(Pratt & Whitney
Canada, Canada)
Break
AD(9)
HT(3)
HT(12)
CB(8)
SV(3)
MT(3)
Gas Turbine Open
Seminar
(in Japanese)
Room
1004
-
PF(1)
PF(2)
Nov.15 (Tue.)
Room
Room
Room
Room
Room
1008
1007
1006
1005
1004
AD(1)
HT(13)
SV(4)
ST(1)
MT(4)
PF(3)
Break
AD(2)
AD(11)
HT(5)
CB(1)
CB(9)
ST(2)
MT(5)
PF(4)
Lunch Break
Advanced Aeroengine Technologies to Reduce the Effect of Aviation on the Environment
Prof. Richard J. Parker (Director of Research and Technology, Rolls-Royce Group, UK)
Chair: David Koyama (Rolls-Royce Japan, Japan)
Break
Panel Discussion 1
Trends in Aero Engine Technology Associated with Environmental Issues and CO2 Reduction
(Short- and Mid-Term Strategy)
Organizer : Toshinori Watanabe (The University of Tokyo, Japan), Atsushi Makino, Keiichi Okai (Japan
Aerospace Exploration Agency, Japan), Kuniyuki Imanari (IHI, Japan)
Panelist : Mr. Shigehiko Yamaguchi (JCAB, MLTI. Japan), Prof. Richard J. Parker (Rolls-Royce, UK),
Dr. Alan Epstein (Pratt & Whitney, USA), Dr. Hidekazu Kodama (IHI, Japan),
Mr. Tohru Saito (JAL, Japan), Mr. Toshihiko Noguchi (ANA, Japan)
Observer: Mr. Takayuki Kanai (METI, Japan)
Chair: Toshinori Watanabe (The University of Tokyo, Japan)
9:30-11:00
11:00-11:20
11:20-12:50
12:50-14:30
14:30-15:30
15:30-15:50
15:50-17:50
Room
1202
AD(10)
Room
1009
HT(4)
10
Nov.16 (Wed.)
9:30-11:00
Room
1202
AD(12)
Room
1009
HT(6)
Room
1008
CB(2)
Break
Room
1007
CB(10)
AD(13)
HT(7)
CB(3)
DO(1)
11:00-11:20
11:20-12:50
(11:05-12:50)
AD(3)
Room
1006
ST(3)
ST(4)
Room
1005
DOTT(1)
DOTT(2)
Room
1004
PF(5)
PF(6)
Lunch Break
How to Develop Sustainable Low-Carbon Society (LCS) for Japan and Asian Countries?
-Model Simulation and RoadmapDr. Junichi Fujino (National Institute for Environmental Studies, Japan)
Chair: Toshihiko Nakata (Tohoku University, Japan)
Break
Forum 1
Trends in Aero Engine Technology Associated with Environmental Issues and CO2 Reduction
(Long Term Strategy)
Organizer : Toshinori Watanabe (The University of Tokyo, Japan), Atsushi Makino, Keiichi Okai (Japan
Aerospace Exploration Agency, Japan), Kuniyuki Imanari (IHI, Japan)
Speaker : Dr. Kenneth L. Suder (NASA, USA), Dr. Remy Denos (EU Commission, Belgium),
Dr. Toshio Nishizawa (Japan Aerospace Exploration Agency, Japan)
Plenary Talk 2
Europe's Framework Programme for Research in the Field of Aeronautics and Air Transport
Dr. Remy Denos (EU Commission, Belgium)
12:50-14:30
14:30-15:30
15:30-15:50
15:50-17:00
17:00-17:50
Nov.17 (Thu.)
9:30-11:00
(9:30-11:15)
Room
1202
AD(5)
AD(14)
Room
1009
HT(8)
11:00-11:20
11:20-12:50
12:50-14:00
14:00-15:30
15:30-15:50
15:50-17:50
17:50-18:30
Room
1008
Room
1007
Room
1006
Room
1005
CB(4)
DO(2)
ST(5)
DOTT(3)
DO(3)
ST(6)
DOTT(4)
Room
1004
PF(7)
Break
AD(6)
PF(8)
HT(9)
CB(5)
-
Lunch Break
Forum 2
Asian Energy and Environmental Strategy
Organizer: Toshinori Watanabe (The University of Tokyo, Japan)
Speaker: Dr. Feng Lin (Chinese Academy of Sciences, China),
Mr. Xueyou Wen (Harbin Marine Boiler & Turbine Research Institute, China),
Prof. Tong Seop Kim (Inha University, Korea),
Dr. Atsushi Kurosawa (The Institute of Applied Energy, Japan)
Chair: Seung Jin Song (Seoul National University, Korea),
Weiguang Huang (Chinese Academy of Sciences, China)
Break
Panel Discussion 2
CO2 Reduction in Power Plants
Organizer : Toshihiko Nakata (Tohoku University, Japan)
Panelist : Prof. Reza S. Abhari (ETH, Switzerland), Dr. Koji Toyama (Kansai Electric Power, Japan),
Mr. Kensuke Suzuki (Toshiba, Japan)
Closing Address
11
8.2 Technical Sessions
Nov. 14, Mon 11:40-13:10
Conference Hall
Room 1202
Room 1009
Room 1008
[Special Talk 1]
AD(7) Aerodynamics of
Turbine I
HT(1) Conjugate Heat
Transfer
HT(10) Heat Transfer with
Impinging Jet I
Chair: Tsukasa Yoshinaka (Pratt
& Whitney Canada, retired,
Canada)
Toshinori Watanabe (The
Chair: Yuan Xin (Tsinghua
University, China)
Eisaku Ito (Mitsubishi Heavy
Industries, Japan)
Chair: Mikael Wilson (University
of Bath, UK)
Ken-ichi Funazaki (Iwate
University, Japan)
Chair: Yonghui Xie (Xi'an
Jiaotong University, China)
Chiyuki Nakamata (IHI, Japan)
Learn to Think like an Expert
Dr. David C. Wisler (GE
Aviation, retired, USA)
#020 Hot Streak Shaping and
Migration in an Axial Turbine
Kai Regina (ETH Zurich,
Switzerland)
Altug M. Basol
Philipp Jenny
Anestis I. Kalfas
Reza S. Abhari
#086 Conjugate Calculation of
a Film Cooled Blade for
Improvement of the Leading
Edge Cooling Configuration
Norbert Moritz (B&B-AGEMA,
Germany)
Karsten Kusterer
Dieter Bohn (RWTH Aachen
University, Germany)
Takao Sugimoto (Kawasaki
Heavy Industries, Japan)
Ryozo Tanaka
Tomoki Taniguchi
#228 Effect of Injection
Parameters on Jet Array
Impingement Heat Transfer
Yoshisaburo Yamane (Tokyo
University of Science, Japan)
Yoshiyasu Ichikawa
Makoto Yamamoto
Shinji Honami
#194 Numerical Investigation
of the Interaction between
Probe, Flow and Blading in an
Axial-Turbine
Florian Herbst (Leibniz
University Hannover, Germany)
Sven Bluemel
Efstratios Fakiolas (Aristotle
University of Thessaloniki,
Greece)
Joerg R. Seume (Leibniz
University Hannover, Germany)
#164 Conjugate Heat Transfer
Simulation of an Inlet Guide
Vane with Closed-Loop Steam
Cooling
Chao Zhang (Chinese Academy
of Sciences, China)
Jie Hu
Jian-jun Liu
#162 Validation and
Development of Models for
Optimum Wheel Flow Inlet
Angles of Small Size Radial
Turbines
Jan-F. Suhrmann (Techincal
University of Berlin, Germany)
Dieter Peitsch
Marc Gugau (BorgWarner Turbo
Systems Engineering,
Germany)
Tom Heuer
#204 Conjugate Heat Transfer
Simulation of Cooled Turbine
Vanes Using
Unstructured-Mesh CFD
Solver
Daisuke Sasaki (Tohoku
University, Japan)
Tetsuya Yoshiara
Shunpei Yasuda
Kazuhiro Nakahashi
12
#257 Heat Transfer
Characteristics of Some
Multiple Impinging Jets with
Swirling Flow Effect
Chayut Nuntadusit (Prince of
Songkla University,Thailand)
Makatar Wae-Hayee
#258 Heat Transfer
Enhancement of an Impinging
Jet in Crossflow by Elongated
Round Orifice
M. Wae-hayee (Prince of
Songkla University, Thailand)
P. Tekasakul
C. Nuntadusit
Room 1006
Room 1005
CB(6) Development of
Combustor I
Room 1007
SV(1) Structure, Vibration and
Noise I
MT(1) Gas Turbine Failure and
Life Assessment I
Chair: L. S. Yanovskiy (Central
Institute of Aviation Motors,
Russia)
Nobuyuki Kawahara (Okayama
University, Japan)
Chair: Ricardo F.
Martinez-Botas (Imperial
College of Science, Technology
and Medicine, UK)
Shigehiko Kaneko (The
Chair: Motoki Sakaguchi
(Nagaoka University of
Technology, Japan)
Hiroyuki Kagawa (Kansai
Electric Power, Japan)
#068 Investigations of Staged
Fuel Nozzles for Aeroengine
by Single-Sector and
Multi-Sector Combustor Tests
Takeshi Yamamoto (Japan
Aerospace Exploration Agency.
Japan)
Kazuo Shimodaira
Yoji Kurosawa
Seiji Yoshida
[Keynote Lecture-2]
New Directions in
Turbomachinery
Aero-Acoustics
Zoltan S. Spakovszky
(Massachusetts Institute of
Technology, USA)
#199 Characteristics of Crack
Initiation of Inconel Alloy 706
Gas Turbine Rotor
Daisuke Kobayashi (Chubu
Akihiko Ito
Masamichi Miyabe
Yukio Kagiya
Kazutoshi Ishibashi (Toshiba,
Japan)
Daizo Saito
Yomei Yoshioka
#179 Design and Verification
test result of Air Cooled
Combustor for Mitsubishi G
Class Gas Turbine
Keizo Tsukagoshi (Mitsubishi
Katsunori Tanaka
Koichi Nishida
Shinji Akamatsu
Keijiro Saitoh
Hiroaki Kishida
Kenji Sato
#182 Single-Digit NOx DLE
Combustion System for
KAWASAKI M7A-03 Green
Gas Turbine
Kiyoshi Matsumoto ( Kawasaki
Takeo Oda
Satoshi Toyota
Masahiro Ogata
Yasuhiro Kinoshita
#047 Environmental Noise
Impact Assessment Method
of Cogeneration System
Ken Kaneuchi (Osaka Gas,
Japan)
Koichi Nishimura
#185 Effects of Stress and
Oxidation for Creep and
Creep-Fatigue Behaviors
of Ni-base Superalloy Inconel
Alloy 706
Yomei Yoshioka (Toshiba,
Japan)
Kazutoshi Ishibashi
Daizo Saito
Rie Sumiya
Shoko Ito
Akihiro Ito
Masamichi Miyabe
Yukio Kagiya
#075 Evaluation on
Relaxation Behaviors of
Compressive Residual Stress
of Peened Inconel Alloy 706
Test Specimens after Thermal
and Stress Aging Treatments
Rie Sumiya (Toshiba, Japan)
Toshiyuki Tazawa
Yomei Yoshioka
Kazutoshi Ishibashi
Akihiko Ito
Masamichi Miyabe
Yukio Kagiya
13
Room 1004
Nov. 14, Mon 14:30-16:00
Conference Hall
Room 1202
Room 1009
Room 1008
[Special Talk 2]
Turbine II
HT(2) Numerical Simulation of
Heat Transfer I
HT(11) Heat Transfer with
Impinging Jet II
Chair: David C. Wisler (GE
Aviation, retired, USA)
Yukio Otsuki (Kawasaki Heavy
Industries, Japan)
Chair: Dieter Peitsch (Technical
Susumu Teramoto (The
Chair: Norbert Moritz (B&B –
AGEMA, Germany)
Takashi Yamane (Japan
Aerospace Exploration Agency,
Japan)
Chair: Kenichiro Takeishi
(Osaka University, Japan)
My Hopes in Young Gas
Turbine Professionals
-Approach to Technical
OpportunitiesMr. Tsukasa .Yoshinaka (Pratt &
Whitney Canada, retired,
Canada)
#007 Integrated Environment
for Gas Turbine Design
Leonid Moroz (SoftInWay, USA)
Yuriy Govorushchenco
Petr Pagur
Kirill Grebennik
Wolfgang Kutrieb (Kutrieb
Research, USA)
Mike Kutrieb
#198 Benchmark Simulation
of RANS CFD for Heat
Transfer Evaluation on the
VKI LS89 Blade
Toshihiko Takahashi (Central
Research Institute of Electric
Power Industry, Japan)
Tony Arts (von Karman Institute
for Fluid Dynamics, Belgium)
Tom Verstraete
Johan Prinsier
#151 Heat Transfer to
Impinging Jets in a Narrow
Channel
Mark W. Miller (University of
Central Florida, USA)
Roberto Claretti
Mark Ricklick
Jayanta S. Kapat
#063 Studies on the Flow
Fields around Two Types of
LPT Cascade with Different
Loading Designs: Midspan
and Secondary Loss
University, Japan)
Kazuki Okamura
Yasukuni Sato
Masaaki Hamabe (IHI, Japan)
#017 Computations of Flow
and Heat Transfer in a
Rotor-Stator System with
Externally-Induced Ingestion
Le Wang (University of Bath,
UK)
Michael Wilson
#076 Improving Performance
of a High Work Turbine Using
Non-Axisymmetric Endwall
Ichiro Miyoshi (Hitachi, Japan)
Shin’ichi Higuchi
14
#003 Effect of Roughened
Element on Target Surface
and Cooling Hole Shape on
Impingement Cooling
Effectiveness
Yoji Okita
Japan)
Yoshitaka Fukuyama
Toyoaki Yoshida
Room 1006
Room 1005
CB(7) Development of
Combustor II
Room 1007
Noise II
MT(2) Gas Turbine Failure and
Life Assessment II
PF(1) Performance I
Chair: Yanovskiy L.S. (Central
Institute of Aviation Motors,
Russia)
Keiichi Okai (Japan Aerospace
Exploration Agency, Japan)
Chair: Zoltan S Spakovszky
(Massachusetts Institute of
Technology, USA)
Nobuhiko Yamasaki (Kyushu
University, Japan)
Chair: Koji Take (Kawasaki
Chair: Tong Seop Kim (Inha
University, Korea)
Susumu Nakano (Hitachi,
Japan)
#217 Development of
Combustor with Exhaust Gas
Recirculation System for
1700°C Class Gas Turbine
Satoshi Takiguchi (Mitsubishi
Keijiro Saitoh
Eisaku Ito
Keizo Tsukagoshi
Koichi Nishida
Katsunori Tanaka
#207 Research on Mixing
Devices for Jet Noise
Reduction
Tatsuya Ishii (Aviation Program
Group, Japan Aerospace
Exploration Agency, Japan)
Hideshi Oinuma
Kenichiro Nagai
Takeshi Tagashira (Jet Engine
Technology Research Center,
Japan Aerospace Exploration
Agency, Japan)
#069 Examination of
Estimation Method of
Damage in Gas Turbine Blade
Root Fixings
Hirotaka Kurashima (Kawasaki
Hirokazu Matsuda
Hideki Hiramatsu
Kazuhiko Tanimura
#010 A Robust and
Multi-Objective Trade-off
Design Method for Secondary
Air System
Shinichiro Ihara (IHI, Japan)
Hirotaka Kure
Hatsuo Mori
#236 Development and
Preliminary Performance
Evaluation of a Multi Swirl
Airblast Burner with Multi
Fuel-Film Annuli
Takashi Suzuki (Waseda
University, Japan)
Yasutaro Yoshiura (Hosei
University, Japan)
Tomoki Ishikawa
Kazuaki Matsuura (Japan
Japan)
Jun Iino (Advanced Science &
Intelligence Research Institute,
Japan)
Hideshi Yamada (Japan
Japan)
Shigeru Hayashi (Hosei
University, Japan)
Katsuhiro Yamamoto (Waseda
University, Japan)
#184 Development of a Lean
Staged Combustor in ECO
Engine Project
Ryusuke Matsuyama (Kawasaki
Masayoshi Kobayashi
Hideki Ogata
Atsushi Horikawa
Yasuhiro Kinoshita
#065 Study on Vibration
Response Reduction of
Bladed Disk by Use of
Asymmetric Vane Spacing
(Study on Response
Reduction of Mistuned
Bladed Disk)
Yasutomo Kaneko (Ryukoku
University, Japan)
Masaki Ohta
Kazushi Mori (Mitsubishi Heavy
Industries, Japan)
Hiroharu Ohyama
#042 First Stage Segmented
Nozzle Failure Analysis
Saeed Asadikouhanjani (Mapna
Turbine Blade Engineering &
Manufacturing,
Iran)
Reza Ghorbani
Room 1004
#087 Study on Turboprop
Engine Performance
Behaviors Considering Inlet
and Exhaust Duct Pressure
Loss in Altitude Test Chamber
Condition
Changduk Kong (Chosun
University, Korea)
Keonwoo Kim
Semyung Lim
Jaekyoug Yoo
Kyeongho Choi (Atics
Engineering, Korea)
#107 Fault Diagnostics of A
Turboprop Engine Using
Inverse Performance Model
and Artificial Intelligent
Method
Changduk Kong (Chosun
University, Korea)
Semyung Lim
Keonwoo Kim
#079 Experimental and
Numerical Investigation of
Supersonic Jet Noise
Reduction with Microjet
Injection
Ryuichi Okada (The University
of Tokyo, Japan)
Toshinori Watanabe
Seiji Uzawa
Takehiro Himeno
Tsutomu Oishi (IHI, Japan)
15
Nov. 14, Mon 16:20-17:50
Conference Hall
Room 1202
Room 1009
Room 1008
Turbine III
HT(3) Numerical Simulation of
Heat Transfer II
HT(12) Internal Cooling I
Chair: Leonid Moroz (SoftIn
Way, USA)
University, Japan)
Chair: Karsten Kusterer (B&B
-AGEMA, Germany)
Toshihiko Takahashi (Central
Chair: Kwang-Yong Kim (Inha
University, Korea)
Hisato Tagawa (Hitachi, Japan)
#125 Development of an
Unsteady Multi-Species
Numerical Method for Internal
Compressible Flows in the
Turbine
Zhong-Nan Wang (Tsinghua
University, China)
Zhi-Rong Lin
Xin Yuan
#016 Numerical Investigations
of the Effect of Vortex
Structures on Local Heat
Transfer in a Large Scale
Turbine Cascade
Rebecca Reviol (University
Kaiserslautern, Germany)
Roman Franze
Martin Böhle
Alexander Wiedermann (MAN
Diesel & Turbo SE, Germany)
Kenichiro Takeishi (Osaka
University, Japan)
#216 Investigation on Heat
Transfer Characteristics of a
Cooling Channel with Densely
Arranged Rib Turbulator
Katsuhiko Ishida (Kawasaki
Tomoko Hagari
Kenichiro Takeishi (Osaka
University, Japan)
Yutaka Oda
#113 Optimization of
Secondary Flow Loss
Reduction of High Loaded
Gas Turbine Cascade
Tohru Tamagawa (Osaka
Institute of Technology, Japan)
Kenji Fujii (Mitsubishi Heavy
Industries, Japan)
Masao Ohto (Osaka Institute of
Technology, Japan)
Yutaka Kawata
#117 Effects of Rotor Tip
Leakage on the Unsteady
Flow Fields of Stator Blade in
a One and Half Turbine Stage
Jun Li (Xi'an Jiaotong University,
China)
Xin Yan
Liming Song
Shaojun Li
Zhenping Feng
#060 A High-Order LES
Approach to study the
Redistribution of the Inlet
Temperature Distortion in a
Turbine
Debasish Biswas (Toshiba,
Japan)
Tomohiko Jimbo
#141 CFD Predictions of the
Aerodynamics and Heat
Transfer from Arrays of
Impinging Jets with
Crossflow
G.E. Andrews (University of
Leeds, UK)
J. Wang
R. A. A. Abdul Hussain
16
#226 Heat Transfer
Characteristics of
Rib-Roughened Channel with
Angled Ribs at Low
Pitch-to-Height Ratio
Hiroki Kitada (Osaka University,
Japan)
Kenichiro Takeishi
Masaharu Komiyama
Yutaka Oda
Hidetake Maeda
Katsuhiko Ishida (Kawasaki
#077 Numerical Optimization
of Ribbed Serpentine Cooling
Ducts
Xiao-Dong Zhang (Chinese
Academy of Sciences, China)
Jian-Jun Liu
Sheng Su
Room 1007
Room 1006
CB(8)Atomization and Ignition
Noise III
MT(3) Crack Propagation in
Gas Turbine Component
PF(2) Performance II
Chair: Anestis Kalfas (Aristotle
Greece)
Yasuhiro Kinoshita (Kawasaki
Chair: Seung Jin Song (Seaul
National University, Korea)
Yasutomo Kaneko (Ryukoku
University, Japan)
Chair: Takashi Ogata (Central
Masaru Sekihara (Hitachi,
Japan)
Chair: Changduk Kong
(Chosun University, Korea)
Eiichi Koda (Central Research
Institute of Electric Power
Industry, Japan)
#081 Atomization of Liquid Jet
by Surrounding Fast Gas
Stream
Chihiro Inoue (The University of
Tokyo, Japan)
Toshinori Watanabe
Takehiro Himeno
Akifumi Koishi
Seiji Uzawa
#186 Reduced Order
Modeling of a Bladed Rotor
with Geometric Mistuning:
Alternative Bases and
Extremely Large Mistuning
Yasharth Bhartiya (The
Pennsylvania State University,
USA)
Alok Sinha
#031 Evaluation of Crack
Propagation Behavior in Gas
Turbine First-Stage Nozzle
Hiroyuki Kagawa (Kansai
#144 Performance Evaluation
of a Microturbine Centrifugal
Compressor Using a Novel
Modeling Approach
Adeel Javed (Delft University of
Technology, The Netherlands)
Sin-Yun Yang
Mattia Olivero
Rene Pecnik
Jos P. van Buijtenen
#145 Study of Laser Induced
Ignition for Combustible
Mixtures with Pico-Second
Pulse Duration Laser
Jun Hayashi (Osaka University,
Japan)
Kenji Furui
Tomoki Okada
Noriaki Nakatsuka
Takunori Taira (Institute of
Molecular Science, Japan)
Terushige Hori (Osaka Police,
Japan)
Fumiteru Akamatsu (Osaka
University, Japan)
#218 3-D Linear Unsteady
Aerodynamic Force
Calculations of Vibrating
Blade Rows Using the
UPACS-Based CFD Codes
Ayumi Kubo (Kyushu University,
Japan)
Nobuhiko Yamasaki
#223 Ignition Characteristics
in Transient Spray by
Laser-Induced Plasma
Nobuyuki Kawahara (Okayama
University, Japan)
Eiji Tomita
Shinya Nakamura
Room 1005
#061 Fatigue Crack
Propagation Behavior
Significantly Interacting with
Microstructural Units in Thin
Wall Ni-Base Superalloy
Structures
Masakazu Okazaki (Nagaoka
University of Technology, Japan)
Motoki Sakaguchi
Sou Yamanobe
Validation of Flutter Analysis
Tool Using a Harmonic
Balance Method
Mizuho Aotsuka (IHI, Japan)
Robert Kielb (Duke University,
USA)
Kenneth Hall
Room 1004
#170 A Study on Thrust of
Radial Turbines That Have a
Permanent Magnet Generator
Rotor in a Common Shaft
Susumu Nakano
(Hitachi,Japan)
Kuniyoshi Tsubouchi (Formerly
Hitachi, Japan)
Tomoaki Inoue (Hitachi, Japan)
Tadaharu Kishibe
Hiroyuki Shiraiwa (Hitachi
Engineering & Services, Japan)
#190 Gas Turbine Condition
Diagnostic Techniques for a
Proactive Maintenance
Naotaka Mikami (Mitsubishi
Isao Moriwaki
Erika Funabiki
Kazutoshi Ozeki
17
Nov. 15, Tue 9:30-11:00
Conference Hall
Room 1202
Room 1009
Room 1008
AD(1) Aerodynamics of Axial
Compressor I
Turbine IV
HT(4)Heat Transfer
Measurement
HT(13) Internal Cooling II
Chair: Jun Li (Xi’an Jiaotong
University, China)
Yutaka Kawata (Osaka Institute
of Technology, Japan)
Chair: Jayanta S. Kapat
(University of Central Florida,
USA)
Takayuki Matsunuma
(Advanced Industrial Science
and Technology, Japan)
Chair: Akira Murata (Tokyo
University of Agriculture and
Technology, Japan)
Chair: Shu Fujimoto (IHI,
Japan)
#030 Detail Flow Field
Investigation of an Axial Flow
Compressor at Windmill
Condition
Motohiro Imaeda (IHI, Japan)
Dai Kato
Yutaka Ohta (Waseda
University, Japan)
Goh Totani
Eisuke Outa
#175 Time Resolved
Full-Annulus Computations
of a Turbine with
Inhomogeneous Inlet
Conditions
Rafael R. Adamczuk (Leibniz
Universitaet Hannover,
Germany)
Joerg R. Seume
#019 The Validation between
the Measurement and the
Calculational Analysis for the
Surface Temperature of
High-Temperature Turbine
Blades in a Gas Turbine
Wen Xueyou (Harbin Marine
Boiler & Turbine Research
Institute, China)
Zhang Lichao
Gu Zhongming
Xiao Dongminf
Chen Ruibin
#203 Study on the Effects of
Pin Inclination in Convection
Cooling for Turbine Blade
Toshihiro Takeda (Tokyo
Technology, Japan)
Japan)
#064 Three-Dimensional
Numerical Simulation on Flow
Field and Casing Optimization
of an Eleven-Stage Axial
Compressor
Lianhui Zhao (Shanghai Electric
Power Generation Group,China)
Lei He
Qiang Xu
Yaoxin Cui (Shanghai Electric
Power Generation Equipment,
China )
Yu Hu
#055 Multi-Objective
Optimization of
Three-Dimensional Blade
Shape for an Axial
Compressor Rotor in
Transonic Stage
Chihiro Myoren (Hitachi, Japan)
Yasuo Takahashi
Yasuhiro Kato
#215 Aero and Aero-Thermal
Characteristics of Turbine
Rotor Blade’s Platforms
Yasuro Sakamoto (Mitsubishi
Takeshi Nakamura
Kazuya Nishimura
Eisaku Ito
#248 Two- and
Three-Dimensional Numerical
Analysis on Stator-Rotor
Interactions in a Supersonic
Turbines
Takeshi Kai (The University of
Tokyo, Japan)
Susumu Teramoto
Koji Okamoto
#062 Annular Sector Cascade
Rig Tests of a CMC Stator
Vane with Cooling Structure
Kozo Nita (IHI, Japan)
Yoji Okita
Chiyuki Nakamata
18
#123 Shape Optimization of a
Rotating U-Duct Channel with
Guide Vanes in the Turning
Region
Mi-Ae Moon (Inha University,
Korea)
Kwang-Yong Kim
#103 Heat Transfer and Fluid
Flow in a Rectangular
Channel with the
Combination of Dimples,
Protrusions and Orthogonal
Ribs
Yonghui Xie (Xi'an Jiaotong
University, China)
Jibing Lan
Di Zhang
Room 1007
Room 1006
Room 1005
Room 1004
Noise IV
ST(1) Steam Turbine I
MT(4) Advance Gas Turbine
Material and Repair
Technology
PF(3) Performance III
Chair: Alok Sinha (The
Pennsylvania State University,
USA)
Hideki Moriai (Mitsubishi Heavy
Industries, Japan)
Chair: Anestis I. Kalfas (Aristotle
Greece)
Yoshihiro Sakai (Fuji Electric,
Japan)
Chair: Yomei Yoshioka
(Toshiba, Japan)
Satoshi Takahashi (IHI, Japan)
Chair: Vili Panov (Siemens
Industrial Turbomachinery, UK)
Norihiko Iki (Advanced Industrial
Science and Technology, Japan)
#093 Root Cause Analysis of
Impeller Blade Tip Rubbing
Luke Park (Doosan Heavy
Industries and Construction,
Korea)
Chang Yong Lee
Donghun Kim
Jinik Suk
#053 Prediction of Effects of
Potential Field Interaction and
Wake Interaction on Unsteady
Force for Buckets
Tomomi Nakajima (Hitachi,
Japan)
Yoshio Shikano
Yutaka Yamashita
#246 A Study on Stacking
Method in Advanced Fan
Blade
Takayuki Fujimoto(Advanced
Science and Intelligence
Research Institute, Japan)
Itaru Kusunoki
Toyohiko Ota
Daisaku Masaki (Japan
Japan)
#104 Non-Equilibrium
Condensing Flow Modeling in
Nozzle and Turbine Cascade
Xiaofeng Zhu (Tsinghua
University, China)
Zhirong Lin
Xin Yuan
Tomohiro Tejima (Toshiba,
Japan)
Yoshiki Niizeki
Naoki Shibukawa
#181 Development of Ni-base
Single-Crystal Superalloy for
the Next Generation Gas
Turbine Blade
Ikuo Okada (Mitsubishi Heavy
Industries, Japan)
Masaki Taneike
Hidetaka Oguma
Eisaku Ito
Keizo Tsukagoshi
Tadaharu Yokokawa (National
Institute for Materials Science,
Japan)
Hiroshi Harada
#206 Coolant Modulation and
Pre-Cooling to Resolve
Turbine Blade Overheating
Caused by Firing Syngas in
Gas Turbines
Ik Hwan Kwon (Inha University,
Korea)
Do Won Kang
Tong Seop Kim
Simoon Kim (KEPCO Research
Institute, Korea)
#167 Development of an
Assistant Design System for
Gas Foil Bearings
Kai Feng (Tokyo Institute of
Technology, Japan)
Shigehiko Kaneko (The
#002 Controlling Mixing at the
Interaction Zone through
Systematic Variation of the
Inlet Rotor Cavity Volume and
Length Scale
Konstantinos G. Barmpalias
(ETH Zurich, Switzerland)
Anestis I. Kalfas (Aristotle
Greece)
Reza S. Abhari (ETH Zurich,
Switzerland)
Toshio Hirano (Toshiba, Japan )
Naoki Shibukawa
Takashi Sasaki
#008 Development of NIMS
Burner Rig and Cyclic
Oxidation of Ni-base Single
Crystal Superalloys
Kazuhide Matsumoto (National
Japan)
Yutaka Koizumi
Kyoko Kawagishi
Hiroshi Harada
#74 Development and
Application of Repair
Technology for Land-base
Gas Turbine Nozzles
Daizo Saito (Toshiba, Japan)
Yomei Yoshioka
Reki Takaku
Kazuhiro Kitayama
Yoshiaki Sakai
19
#231 Performance
Expectation of a Semi-closed
Oxy-Fuel Combustion
Combined Cycle Using an
Existing Gas Turbine
Hyun Jun Yang (Inha University,
Korea)
Soo Young Kang
Do Won Kang
Tong Seop Kim
#259 Aeroderivative Gas
Turbine Solutions for Firming
the Grid
Daniel A. Loero (GE Energy,
USA)
Nov. 15, Tue 11:20-12:50
Conference Hall
Room 1202
Room 1009
Room 1008
Compressor II
Turbine V
HT(5) Heat Transfer on Film
Cooling I
CB(1) Fuel
Chair: Lianhui Zhao (Shanghai
Electric Power Generation
Group, China)
Chihiro Myoren (Hitachi, Japan)
Chair: Joerg R. Seume (Leibniz
University of Hannover,
Germany)
Takehiro Himeno (The
Chair: Kenichiro Takeishi
(Osaka University, Japan)
Tomoko Hagari (Kawasaki
Chair: Laurent Zimmer
(CNRS-Ecole Centrale Paris,
France)
Atsushi Makino (Japan
Japan)
#056 Effects of Tip Leakage
Vortex Breakdown on
Unsteady Flow Fields at
Near-Stall Condition in a
Low-Speed Axial Flow
Compressor Rotor with Large
Tip Clearance
Kazutoyo Yamada (Kyushu
University, Japan)
Hiroaki Kikuta
Masato Furukawa
Satoshi Gunjishima
#254 Transition Mechanisms
in Laminar Separated Flow
under Unsteady Main Flow
Conditions - Part I: Steady
Flowfield
Christoph Lyko (Technical
Jerrit Daehnert
Dieter Peitsch
#172 Gas Turbine Blade Tip
and Near-Tip Heat Transfer
with Film Cooling
Gregory Kramer (Louisiana
State University, USA)
Louis Moreaux
Sumanta Acharya
#013 Alternative Fuels for
Aviation Gas Turbine Engines
and Efficiency of its
Application
L.S. Yanovskiy (Central Institute
of Aviation Motors, Russia)
V.V. Raznoschikov
#046 Span-wise Mixing
Prediction by Unsteady
Multistage Simulation for a
Transonic Axial Compressor
Mai Yamagami (IHI, Japan)
Hidekazu Kodama
Dai Kato
Naoki Tsuchiya
Yasuo Horiguchi (Advanced
Science & Intelligence Research
Institute, Japan)
Junichi Kazawa (Japan
Japan)
#136 Development of a Highly
Loaded Axial Flow
Compressor for Small Core
Size Aircraft Engines
Dai Kato (IHI, Japan)
Guillaume Pallot
Daisuke Sato
Mai Yamagami
Hidekazu Kodama
#255 Transition Mechanisms
in Laminar Separated Flow
under Unsteady Main Flow
Conditions - Part II: Unsteady
Flowfield
Christoph Lyko (Technical
Jerrit Daehnert
Dieter Peitsch
#152 Secondary Flows and
Coolant Film Interaction of
High Subsonic Cascade
Srikrishna Mahadevan
(University of Central Florida,
USA)
Matthew Golsen
C.Q. Nguyen
Mark A. Ricklick
Jayanta S. Kapat
#195 Film Cooling
Performance over Dimpled
Cutback Surface at Airfoil
Trailing Edge
Satomi Nishida (Tokyo
Technology, Japan)
Akira Murata
Kousuke Ito
Hiroshi Saito
Kaoru Iwamoto
Yoji Okita (IHI, Japan)
Chiyuki Nakamata
20
#092 Development of Biogas
Combustor for a Small Size
Industrial Gas Turbine
Jaechul Chun (Doosan Heavy
Industries & Construction,
Korea)
Ho Keun Kim
Ji-Hyuk Im
Yunho An
Jinhoon Choe
#171 Biodiesel and its Blends
with Kerosene as an
Alternative Fuel in Low NOx
Gas Turbine Combustor
Mohamed Altaher (The
University of Leeds, UK)
Hu Li
Gordon E. Andrews
Room 1007
Room 1006
Room 1005
Room 1004
CB(9) Numerical Simulation
of Combustion I
ST(2) Steam Turbine II
MT(5) Coating Technology
PF(4) System and Control I
Chair: Scott Drennan (Reaction
Design, USA)
Tomohiro Ide(IHI , Japan)
Greece)
Yoshihiro Sakai (Fuji Electric ,
Japan)
Chair: Junzo Fujioka(National
Japan)
Masaki Taneike (Mitsubishi
Chair: Hiroyuki Furukawa (IHI,
Japan)
Hisao Futamura (Japan
Japan)
#027 A Coupled Combustion
CFD Analysis of an Aircraft
Gas Turbine Combustion
Chamber Complete with
Effusion Cooling Holes
Kouji Murata (Honda R&D,
Japan)
Ryosuke Shibata
Yadomaru Go
[Keynote Lecture-4]
Recent Technologies for
Concentrated Solar Power
Systems and Steam Turbines
Nobuo Okita (Toshiba, Japan)
#118 Damage Behavior and
Residual Interfacial Strength
of Thermal Barrier Coatings
after Thermal Cycle Fatigue
Yasuhiro Yamazaki (Niigata
Shin-ichiro Kuga
Hirotaka Fukanuma (Plasma
Giken, Japan)
Naoyuki Ohno
#041 More Electric Engine
Architecture for Fuel System
of Aircraft Gas Turbine Engine
Naoki Seki (IHI, Japan)
Noriko Morioka
Hitoshi Oyori (IHI Aerospace,
Japan)
#066 Large-Eddy Simulation
of a Spray Combustion Field
in a Scaled Sector Model for a
Jet Engine Combustor
Industries, Japan)
Ryoichi Kurose (Kyoto
University, Japan)
Satoru Komori
University, Japan)
of Air-Blasted Liquid Sheet
Dynamics
Kazuya Koizumi (Keio
University, Japan)
Akiko Matsuo
Atsushi Horikawa (Kawasaki
Nonaka Yoshiharu
#146 Blade Manufacturing
Process Appraisal Using a
Coordinate Measurement
Machine
Pavlos Zachos (Cranfield
University, UK)
Anestis Kalfas (Aristotle
Greece)
Pericles Pilidis (Cranfield
University, UK)
#180 Development of
Advanced Thermal Barrier
Coating for the Next
Generation Gas Turbine
Taiji Torigoe (Mitsubishi Heavy
Industries, Japan)
Hideaki Kaneko
Ikuo Okada
Eisaku Ito
Ichiro Nagano
Masahiko Mega
Keizo Tsukagoshi
Yoshifumi Okajima
Yoshitaka Uemura
#253 New Materials and
Processing Concepts for High
Performance Thermal Barrier
Coatings
Detlev Stoever (Institute of
Energy and Climate Research,
Germany)
Alexandre Guignard
Ophelia Jarligo
Matthias Karger
Daniel E.Mack
Georg Mauer
Tanja Steinke
Robert Vassen
21
#159 Dynamic Simulation of
Active Compressor Stability
Control for a Gas Turbine
Engine
Vili Panov (Siemens Industrial
Turbomachinery, UK)
#200 Load-Following
Operations of VHTR
Gas-Turbine Cogeneration
System for Developing
Countries
Hiroyuki Sato (Japan Atomic
Energy Agency, Japan)
Xing L. Yan
Yukio Tachibana
Yukitaka Kato (Tokyo Institute of
Technology, Japan)
Nov. 16, Wed 9:30-11:00
Conference Hall
Room 1202
Room 1009
Room 1008
AD(12) Computational Fluid
Dyna mics I
Cooling II
CB(2) Emission I
Chair: Martin Bohle (University
Kaiserslautern, Germany)
Tetsuya Sato (Waseda
University, Japan)
Chair: Ken-ichi Funazaki (Iwate
University, Japan)
Masahide Kazari (Kawasaki
Chair: Gordon E. Andrews(The
Satoshi Tanimura(Mitsubishi
#072 Speeding up the CFD
Process
C.F. Favaretto (BoXeR
Solutions, Japan)
W.P. Kellar (Cambridge Flow
Solutions, UK)
W.N Dawes. (Cambridge
University, UK)
#148 Multi-Row Transpiration
Cooling with Comparison to
Discrete Arrays
Greg Natsui (University of
Michael Torrance
Mark Miller
Mark Ricklick
Jayanta Kapat
#038 An Emissions Model for
NOx and CO Emission Trends
from Industrial Gas Turbines
Christos Samaras (Cranfield
University,UK, Aristotle
Greece)
Giuseppina Di Lorenzo
(Cranfield University, UK)
Anestis Kalfas (Aristotle
Greece)
Pericles Pilidis (Cranfield
University, UK)
#114 Numerical Investigations
on the Leakage Flow
Characteristics of Different
Honeycomb Seal
Configurations
Jun Li (Xi'an Jiaotong University,
China)
Xin Yan
Liming Song
Shengru Kong
Zhenping Feng
#221 Modeling for Prediction
of Very Short Ejector
Performance
Ju Hyun Im (Seoul National
University, Korea)
Seung Jin Song
#149 Overall Thermal
Performance of Transport
Promoters in Internal Cooling
Channels for Rotating
Machineries
Michelle Valentino (University of
Lucky Tran
Carson Slabaugh
Mark Ricklick
Jay Kapat
#057 Heat Transfer and
Aerodynamics Studies of
Multiple Cooling Holes
Kamil Abdullah (Iwate University,
Japan)
Hisato Onodera
Ken-ichi Funazak
Takeomi Ideta (IHI , Japan)
22
#142 Effects of Pressure on
Prompt NOx Formation
Characteristics in Premixed
Flame
Japan)
Noriaki Nakatsuka
Yuichi Shiga
Hiroyuki Kashihara (Kawasaki
University, Japan)
#232 Simple Low NOx
Combustor Technology for
Environmentally Compatible
Engine(ECO Engine)
Tomohiro Ide (IHI, Japan)
Nagayoshi Hiromitsu
Toshihiro Fujimori
Jun Hosoi
Room 1007
Room 1006
CB(10) Numerical Simulation
of Combustion II
ST(3) Long Blade Technology
of Steam Turbine
DOTT(1) Turbocharger
Technology I
PF(5) System and Control II
Chair: Laurent Zimmer
(CNRS-Ecole Centrale Paris,
France)
Nozomu Hashimoto (Central
Chair: Jun Li (Xi'an Jiaotong
University, China)
Hiroharu Ohyama (Mitsubishi
Chair: Srithar Rajoo (Universiti
Teknologi Malaysia, Malaysia)
Hideaki Tamaki (IHI, Japan)
Chair: Vili Panov (Siemens
Industrial Turbomachinery, UK)
Naohiro Kusumi (Hitachi, Japan)
#256 Assisting Clean Engine
Design with Accurate
Simulation of Real Fuel
Behavior in Gas Turbine
Combustors
Scott Drennan (Reaction
Design, USA)
Verification of The Next
Generation's Steam Turbine
Toshio Watanabe (Mitsubishi
Kazushi Mori
Toshihiro Miyawaki
Hiroharu Ohyama
[Keynote Lecture-3]
Boosting and Turbocharger
Needs for Highly Downsized
Low Carbon Vehicles
Ricardo Martinez-Botas
(Imperial College of Science,
Technology and Medicine, UK)
#208 Development of a
Control System for the
Catalytic Combustion Gas
Turbine (M1A-13X)
So Kurosaka (Kawasaki Heavy
Industries, Japan)
Muneyuki Nishi
Masahiro Ogata
Tsuyoshi Sato
Mitsugu Ashikaga
#187 Improvement on Light
around Characteristics of a
Lean Staged Fuel Spray
Nozzle (The Second Report)
Masayoshi Kobayashi
(Kawasaki Heavy Industries.
Japan)
Ryusuke Matsuyama
Atsushi Horikawa
Takeo Oda
Hitoshi Fujiwara (Japan
Japan)
#043 Effect of Ambient
Pressure on Spray Jet Flame
Behavior
Tomoaki Kitano (Kyoto
University, Japan)
Tomoaki Nakatani
Ryoichi Kurose
Satoru Komori
#211 Development of
Titanium 48-inch Last Stage
Series for 3600rpm Steam
Turbine
Naoki Shibukawa (Toshiba,
Japan)
Yoriharu Murata
Takayuki Hashidate
Sakae Kawasaki
Room 1005
#026 Technology of the
Turbocharger Applied to IMO2
4-stroke Marine Diesel Engine
Kenji Nakano (IHI, Japan)
Ryuuma Murano
Ken Nakano
Yutaka Hirata
#249 Development of
Titanium 3600rpm-50inch and
3000rpm-60inch Last Stage
Blades for Steam Turbines
Shigeki Senoo (Hitachi, Japan)
Hideki Ono
Takanori Shibata
Susumu Nakano
Yutaka Yamashita
Kunio Asai
Kazuya Sakakibara
Hideo Yoda
Takeshi Kudo
Room 1004
#240 Application of
Model-Based Control for
JAXA’s Engine Test
Takeshi Tagashira (Japan
Japan)
Takuya Mizuno
Tsunehisa Satake
Nanahisa Sugiyama
Yasushi Nakata (IHI, Japan)
#251 Identification of Jet
Engine Dynamics Based on
the Experimental Data
Mai Kimura (IHI, Japan)
Daiki Kakiuchi
Hiroyuki Furukawa
Takeshi Tagashira (Japan
Aerospace Exploration Agency
Japan)
23
Nov. 16, Wed 11:20-12:50 (11:05-12:50)
Conference Hall
Room 1202
Room 1009
Room 1008
Compressor III
AD(13) Computational Fluid
Dynamics II
Cooling III
CB(3) Emission II
Chair: Lin Feng (Institute of
Engineering Thermophysics,
China)
Chair: W.N. Dawes (Cambridge
University, UK)
Koji Okamoto (The University of
Tokyo, Japan)
Chair: Phillip M. Ligrani (Saint
Louis University, USA)
Yoshitaka Fukuyama (Japan
Japan)
Greece)
University, Japan)
#106 Numerical Calculation of
the Riblet-Effect on
Compressor Blades and
Validation with Experimental
Results
Christoph Lietmeyer (Leibniz
University of Hannover,
Germany)
Christopher Chahine
Joerg R. Seume
#205 Numerical Simulation of
a Mixed Flow Compressor at
Windmill
Yuya Noji (Waseda University,
Japan)
Masamichi Ogawa
Tetsuya Sato
Daisaku Masaki (Japan
Japan)
Hideyuki Taguchi
of the NEKOMIMI Hole
Configuration under Hot Gas
Conditions
Karsten Kusterer
(B&B-AGEMA, Germany)
Norbert Moritz
Nurettin Tekin
Takao Sugimoto (Kawasaki
Masahide Kazari
Ryozo Tanaka
Dieter Bohn (RWTH Aachen
University, Germany)
#101 Effect of Biodiesel and
its Blends Co-firing with
Natural Gas on Emissions in
a Low NOx Gas Turbine
Combustor
Mohamed A. Altaher (The
Hu Li
Gordon E. Andrews
#220 Streamwise Evolution of
Loss in a Shrouded Axial
Compressor Cascade
Jin Wook Kim (Seoul National
University, Korea)
Tongbeum Kim (University of the
Witwatersrand, South Africa)
Seung Jin Song (Seoul National
University, Korea)
#108 An Integrated Total
Pressure and Total
Temperature Probe for Local
Entropy Measurement
Wang Yongsheng (Institute of
China)
Lin Feng
Nie Chaoqun
#239 CFD Analysis of a
Variable Nozzle Turbine for
Automotive Turbocharger
Considering Actual
Geometries
Akihiro Yamagata (IHI, Japan)
#241 Numerical Simulation of
Icing Phenomena in Fan
Rotor/Stator Interaction Field
Ryousuke Hayashi (Tokyo
Kei Kawakami
Masaya Suzuki
Makoto Yamamoto
Shinichirou Shishido (IHI,
Japan)
Takashi Murooka
Hiroshi Miyagawa
#058 Free-Stream Turbulence
Effects on Leading Edge Film
Cooling
University, Japan)
Hirokazu Kawabata
Yoji Okita (IHI,Japan)
24
#084 Numerical Prediction of
NOx Production in Gasturbine
Combustor Using LES with
2-Scalar Flamelet Approach
Kyohei Matsuya (Hokkaido
University, Japan)
Tomonori Yamamoto
Shingo Nishida
Nobuyuki Oshima
Yoshiharu Nonaka (Kawasaki
Kohshi Hirano
Room 1007
Room 1006
Room 1005
Room 1004
DO(1) Development and
Operation I
ST(4) Efficiency
Enhancement of Steam
Turbine
Technology II
PF(6) Stability Enhancement I
Chair: Tadashi Tsuji (Maizuru
National College of Technology,
Japan)
Chair: Jun Li (Xi'an Jiaotong
University, China)
Naoki Shibukawa (Toshiba,
Japan)
Chair: Stephen Spence
(Queen's University Belfast ,UK)
Hideaki Tamaki (IHI, Japan)
Chair: Dieter E. Bohn (RWTH
Aachen University, Germany)
Nobuyuki Yamaguchi (Meisei
University, retired, Japan)
#005 Outline of Conversion to
Gas Turbine Combined Cycle
System at Mizushima Thermal
Power Station #1
Kyoichi Nakanishi (The
Chugoku Electric Power, Japan)
Hisanobu Ogawa
Shigeru Ashitani
Toshio Tsuboi
[Keynote Lecture-5]
Fluid Dynamic Efficiency
Optimization of Steam
Turbine Stages Considering
Leakage Influences and
Inter-Stage Reciprocal
Interferences
Xin Yuan (Tsinghua University,
China)
Qian Pu
Xiaofeng Zhu
Zhirong Lin
Yoshiki Niizeki (Toshiba, Japan)
Naoki Shibukawa
Tadashi Tanuma (Teikyo
University, Japan)
#052 Design and
Development of a Low
Pressure Turbine for Turbo
Compounding Applications
Aman M.I. Mamat (Imperial
and Medicine, UK)
Alessandro Romagnoli
Ricardo F.Martinez-Botas
[Keynote Lecture-1]
Shape Optimization of Casing
Treatment for a Transonic
Axial Compressor to Improve
Operating Stability
Kwang-Yong Kim (Inha
University, Korea)
#021 The Work of
Replacement for the Higher
Efficiency Gas Turbine
Hideki Yoshigai (Kyushu Electric
Power, Japan)
Tadaaki Watanabe
Eiichi Shiga
Masanori Kamimasu
#155 Multilevel Design
Optimization for Long Blade
of Steam Turbines Using
Self-Adaptive Differential
Evolutionary Algorithms
Liming Song (Xi'an Jiaotong
University, China)
Hiroharu Ohyama (Mitsubishi
Jun Li (Xi'an Jiaotong University)
Ming Zhang
Zhenping Feng
#173 Development of New
High-Performance Labyrinth
Seal
Yoshihiro Kuwamura (Mitsubishi
Hiroharu Ohyama
Yoshinori Tanaka
Shin Nishimoto
Kazuyuki Matsumoto
Hidekazu Uehara
#121 Effect of Pipe System
and Casing Configuration on
Surge Phenomenon of
Centrifugal Compressor
Shouta Ayukawa (Osaka
Ken Inoue
Kazunari Fukuyama
Koichiro Morita
Yoshinobu Tsujimoto (Osaka
University, Japan)
Yutaka Kawata (Osaka Institute
of Technology, Japan)
#233 Study on the Tip
Clearance Effects in the
Centrifugal Compressor of a
Micro Gas Turbine by Means
of Numerical Simulations
Mattia Olivero (Delft University of
Technology, The Netherlands)
Adeel Javed
Rene Pecnik
Piero Colonna
Jos van Buijtenen
25
#070 Stall Inception Model for
Fan/Compressors including
the Effect of Three
Dimensional Blade Shape
Xiaohua Liu (Beijing University
of Aeronautics and Astronautics,
China)
Ruiwei Hou (Shenyang Aero
Engine Research Institute,
China)
Dakun Sun (Beijing University of
Aeronautics and Astronautics,
China)
Xiaofeng Sun
#099 Comparison of Stability
Range Extension with Micro
and Large Air Injection in a
Low-Speed Axial Compressor
Zhiting Tong (Institute of
China)
Jichao Li (China Academy of
Science for Postgraduates,
China)
Chaoqun Nie (Institute of
China)
Jingyi Chen
Nov. 17, Thu 9:30-11:00 (9:30-11:15)
Conference Hall
Room 1202
Room 1009
Room 1008
AD(5) Aerodynamics of Radial
Compressor I
AD(14) Aerodynamic Design
Cooling IV
CB(4) Combustion
Phenomena I
Chair: Takanori Shibata
(Hitachi, Japan)
Chair: Seung Jin Song (Seoul
National University, Korea)
Makoto Yamamoto (Tokyo
Chair: Satoshi Hada (Mitsubishi
Chair: Scott Drennan (Reaction
Design, USA)
Masao Ito (Toshiba, Japan)
#035 Waveguide Pressure
Measuring System and Surge
Analysis in a Two-stage High
Speed Centrifugal
Compressor
Chuang Gao (Shanghai
Advanced Research Institute,
China)
Weiguang Huang
Hongwu Zhang (Institute of
China)
#135 Wide Chord Study in
Turbo Machinery (The First
Report)
Satoshi Ohtsuki (HORIBA,
Japan).
[Keynote Lecture-7]
Aerodynamic Losses in
Turbines With and Without
Film Cooling (Keynote
Lecture)
Phillip L. Ligrani (Saint Louis
University, USA)
#059 Investigation of Spray
Combustion Field with Swirl
Flow in a Lab-Scale Aircraft
Gas Turbine Combustor
Kazuki Tainaka (Osaka
University, Japan)
Jun Hayashi
Industries, Japan)
Noriaki Nakatsuka (Osaka
University, Japan)
University, Japan)
Satoru Komori
University, Japan)
#040 Effects of
Impeller-Diffuser Radial Gap
on Unsteady Flow Fields in a
Centrifugal Compressor with
Vaned Diffuser
Takashi Goto (Waseda
University, Japan)
Yutaka Ohta
Eisuke Outa
#160 Flow Pattern Variation
due to Movable Diffuser in
Centrifugal Compressor
Kyung Jun Kang (Korea Atomic
Energy Research Institute,
Korea)
You Hwan Shin (Korea Institute
of Science Technology, Korea)
Sang Ik Wu (Korea Atomic
Energy Research Institute,
Korea)
#201 Investigation on Diffuser
Design in Tesla Compression
Device
Baotong Wang (The University
of Tokyo, Japan)
Koji Okamoto
Susumu Teramoto
#127 Design and Numerical
Investigation of
High-Through-Flow Transonic
Fans with Swept and Straight
Blade
Fang Zhu (Beijing University of
Aeronautics and Astronautics,
China)
Donghai Jin
Xingmin Gui
#227 Effect of Endwall Film
Cooling on Horseshoe Vortex
Formation at the Junction of
Airfoil Leading Edge
Shintaro Kozono (Osaka
University, Japan)
Kenichiro Takeishi
Yutaka Oda
Junichi Seguchi
#234 Numerical Study for
Dependency of Cross-flow
Inlet Turbulence on Film
Cooling Effectiveness
Shu Fujimoto (IHI, Japan)
26
#129 Detailed Laser-Based
Investigation of a Laboratory
Scale Liquid Fuel Burner
L.Zimmer (CNRS-Ecole
Centrale Paris, France)
T. Providakis
P. Scouflaire
S. Ducruix
Room 1007
Room 1006
Room 1005
Room 1004
Operation II
ST(5) Ultra-Supercritical
Steam Turbine I
Technology III
PF(7) Stability Enhancement II
Chair: Frans A. E. Breugelmans
(von Karman Institute, Belgium)
Kazuhiko Tanimura (Kawasaki
Chair: Felipe Favaretto (BoXeR
Solutions KK, UK)
Eiji Saito (Hitachi, Japan)
Chair: Ricardo F.Martinez-Botas
(Imperial College of Science,
Technology and Medicine, UK)
Seiichi Ibaraki (Mitsubishi Heavy
Industries, Japan)
Chair: Yutaka Kawata (Osaka
#051 Development of 1.7MW
Class High Efficiency Gas
Turbine M1A-17
Takahiko Nakatsuji (Kawasaki
Makoto Gouda
Yoshihiro Yamasaki
Yasufumi Hosokawa
Atsushi Norimoto
#169 Development of
Advanced USC Technologies
for 700°C Class
High Temperature Steam
Turbines
Yoshinori Tanaka (Mitsubishi
Shin Nishimoto
Ryuichi Yamamoto
Yuichi Hirakawa
Kenji Kawasaki
Masayuki Setoyama
#080 Feature of Internal Flow
Phenomena of Centrifugal
Compressor for Turbocharger
with Wide Operating Range
Isao Tomita (Mitsubishi Heavy
Industries, Japan)
Seiichi Ibaraki
Masato Furukawa (Kyushu
University, Japan)
Kazutoyo Yamada
#014 Steady and Unsteady
Flow Effects of
Circumferential Grooves
Casing Treatment in a
Transonic Compressor Rotor
Chunill Hah (NASA Glenn
Research Center, USA)
#025 MAN’s New Gas Turbine
in the 6 MW-Class
M. Beukenberg (MAN Diesel
and Turbo, Germany)
A. Wiedermann
U. Orth
E. Aschenbruck
F. Reiss
D. Krueger
D. Frank
M. Blaswich
R. Friedhoff
#094 Development of 5MW
Gas Turbine for 60Hz for
Power Generation Application
Samsik Nam (Doosan Heavy
Industries & Construction,
Korea)
Donghwa Kim
Kyungkook Kim
Sangeon Lee
Juncheol Park
#188 Sand Castings made of
Alloy 625 and Dissimilar
Welding for Steam Turbine
Applications
Claus Lochbichler (Voestalpine
Giesserei Traisen, Austria)
Bernhard Berger (Graz
University of Technology,
Austria)
Rudolf Vallant
Guenther Moderbacher
(Voestalpine Giesserei Traisen,
Austria)
Franz Kolenz
#109 Application of FMM for
Mistuning Analysis of Radial
Inflow Turbine
Hiroaki Hattori (IHI, Japan)
#082 Effect of Circumferential
Single Grooved Casing
Treatment on Flow Instability
of Transonic Compressor
Yasunori Sakuma (The
Toshinori Watanabe
Takehiro Himeno
Motohiro Imaeda
[Keynote Lecture-6]
A Suggested Mechanism of
Significant Stall Suppression
by Air Separator Devices in
Axial Flow Fans
Nobuyuki Yamaguchi (Meisei
University, retired, Japan)
27
Nov. 17, Thu 11:20-12:50
Conference Hall
Room 1202
Room 1009
Room 1008
AD(6) Aerodynamics of Radial
Compressor II
PF(8) Progress in R&D over
Recent 40 years
Cooling V
CB(5) Combustion
Phenomena II
Chair: Weiguang Huang
(Chinese Academy of Sciences,
China)
Yutaka Ohta (Waseda
University, Japan)
Chair:Makoto Yamamoto
(Tokyo University of Science,
Japan)
Chair: Chiyuki Nakamata (IHI,
Japan)
Chair: Gordon E. Andrews(The
Japan)
#165 Design Optimization of
Low Solidity Vaned Diffusers
for Centrifugal Compressors
Using a Multi-Objective
Genetic Algorithm
Takanori Shibata (Hitachi,
Japan)
Manabu Yagi
Chihiro Myoren
Hideo Nishida (Hitachi Plant
Technologies, Japan)
Hiromi Kobayashi
Masanori Tanaka
#039 Feasibility Study of CCS
Introduction Considering
Technological and Economic
Dimensions –Energy System
Design Based on
Technological LearningTakafumi Usui (Tohoku
University, Japan)
Takaaki Furubayashi
Toshihiko Nakata
#122 Numerical Study of Film
Cooling on a Vane Endwall by
Large Eddy Simulation with a
Cooling Hole Model
Yutaka Oda (Osaka University,
Japan)
KenichiroTakeishi
Masataka Uchibori
#209 An Experimental Study
on the Flashback Phenomena
of Premixed Combustors
using Swirling Flow
Yohei Ogawa (Osaka University,
Japan)
Masaharu Komiyama
Kenichiro Takeishi
#126 The Influence of Periodic
Unsteady Wakes on Endwall
Film Cooling with
Combustor-Turbine Interface
Gap Leakage Flow
Zhang Yang (Tsinghua
University, China)
Yuan Xin
#235 Effects of Combustor
Exit Area on Combustion
Characteristics of a
Propane-Fueled Annular
Combustor for a Several
Hundred W-Class Micro Gas
Turbine
Takashi Sakurai (Tokyo
Metropolitan University, Japan)
Saburo Yuasa
Makoto Haga
Hirosh Abe
#174 Numerical Optimization
Design of a Centrifugal
Compressor Scroll Volute
coupled with Impeller and
Vaneless Diffuser
Shibo Qi (Tsinghua University,
China)
Xin Yuan
#213 The Evolusion of
Airborne Power Systems
Ben Jones (Rolls-Royce, UK)
#222 Tech CLEAN Project: A
Technological Challenge for
Environmental Protection
Hisao Futamura (Japan
Japan)
Yoshitaka Fukuyama
Toshio Nishizawa
Ryoji Yanagi
#138 Effect of Incidence Angle
on Film Cooling - Separating
Bubbles Interaction in High
Pressure Turbine
Hong Yinyi (Tsinghua University,
China)
Lin Zhirong
Yuan Xin
28
#224 PIV Measurement in Gas
Turbine Combustor Model
Yoshihiro Yarita (Gunma
University, Japan)
Yuto Endo
Tomohiro Ide (IHI , Japan)
Nagayoshi Hiromitsu
Hisanobu Kawashima (Gunma
University, Japan)
Tsuneaki Ishima
Room 1007
Room 1006
Room 1005
Operation III
ST(6) Ultra-Supercritical
Steam Turbine II
DOTT(4) Performance of
Turbocharger
Chair:A. Wiedermann (MAN
Diesel and Turbo, Germany)
Eiichi Koda (Central Research
Institute of Electric Power
Industry, Japan)
Chair: Felipe Favaretto (BoXeR
Solutions KK , UK)
Eiji Saito (Hitachi, Japan)
Chair: Ricardo F.
Martinez-Botas (Imperial
and Medicine, UK)
Industries, Japan)
#214 Oil Scavenging CFD
Simulations and Experiments
in the Accessory Gearbox of
an Aircraft Engine
Hidenori Arisawa (Kawasaki
Motohiko Nishimura
Kenichiro Tanaka
Hideyuki Imai
Tatsuhiko Goi
#210 Turbine Design and
Materials Aspects for A-USC
Power Plants
Takeo Takahashi (Toshiba,
Japan)
Yuya Murakami
Shogo Iwai
Shigekazu Miyashita
#088 Improvement of
Turbocharger Compressor
Map Width and Performance
due to Vanes in the Annular
Cavity of a Classical Bleed
Slot System
Subenuka Sivagnanasundaram
(Queen's University of Belfast,
UK)
Stephen Spence
Juliana Early
Bahram Nikpour (Cummins
Turbo Technologies, UK)
#189 Evolution and Future
Trend of Large Frame Gas
Turbine for Power
Generation-A New 1600
Degree C J Class Gas
TurbineSatoshi Hada (Mitsubishi Heavy
Industries, Japan)
Junichiro Masada
Eisaku Ito
Keizo Tsukagoshi
#197 Progress in Technology
Development for the Next
Generation High Temperature
Gas Turbine
Eisaku Ito (Mitsubishi Heavy
Industries, Japan)
Keizo Tsukagoshi
Junichiro Masada
Ikuo Okada
Yasuro Sakamoto
#176 Material Design and Trial
Manufacturing of Ni-base
Superalloy for A-USC Steam
Turbine Large Components
Shinya Imano (Hitachi, Japan)
Jun Sato
Hironori Kamoshida
Eiji Saito
#112 Influence of Variable
Nozzle Geometry on Radial
Turbine Performance
Christoph K Natkaniec (Leibniz
Universitat Hannover, Germany)
Jasper Kammeyer
Joerg R Seume
#158 Single Entry Mixed Flow
Turbine Performance
Prediction with 1-D Gas
Dynamic Code Coupled with
Mean Line Model
M.S. Chiong (Universiti
Teknologi Malaysia, Malaysia)
S. Rajoo
A. Romagnoli (Imperial College
of Science, Technology and
Medicine, UK)
R.F. Martinez-Botas
29
Room 1004
Engines Corp.)
Noboru Kuwae (Okinawa Electric
Power)
Akira Goto (Ebara)
Ryosuke Matsumoto (Kansai University)
Akiko Matsuo (Keio University)
Toshihiro Mizobuchi (Shikoku Electric
Power)
Akira Murata (Tokyo University of
Agriculture and Technology)
Takao Nagasaki (Tokyo Institute of
Technology)
Norio Nakazawa (Aikoku Alpha)
Toshio Nishizawa (Japan Aerospace
Exploration Agency)
Akito Nitta (Central Research Institute of
Electric Power Industry)
Yoshihiro Ohkomori (Japan Casting &
Forging)
Yukio Ohtsuki (Kawasaki Heavy
Industries) *3
Yoshihiko Oka (Mitsui Engineering &
Ship Building)
Masahiro Osakabe (Tokyo University of
Marine Science and Technology)
Eisuke Outa (Professor emeritus, Waseda
University) *3
Junichi Saikawa (Niigata Power
Systems)
Naokatsu Sakuma (Tohoku Electric
Power)
Tohru Shimizu (Hitachi Zosen)
Junichiro Takeda (Fuji Electric)
Teiichi Tamaki (IHI)
Nobuhiro Tanatsugu (Muroran Institute
of Technology)
Toshiro Tsuboi (Chugoku Electric
Power)
Ayao Tsuge (Shibaura Institute of
Technology) *3
Tadashi Tsuji (Maizuru National College
of Technology)
Yoshiharu Tsujikawa (Osaka Prefecture
University)
Keizo Tsukagoshi (Mitsubishi Heavy
Industries)
Isamu Yamada (Toho Gas)
Katsuhiro
Yamamoto
(Waseda
University)
Satoru Yamamoto (Tohoku University)
Hideaki Yamane (Ministry of Defense)
Saburo Yuasa (Tokyo Metropolitan
9. ORGANIZING COMMITTEE
Chair
Haruo Yoshiki (Teikyo Heisei University,
Professor emeritus, The University of
Tokyo) *3
Co-chair Shigeki Hirano (Osaka Gas)
Co-chair Masahiro Iwatani (Kansai Electric
Power)
Co-chair Yoshiaki Tsukuda (Mitsubish Heavy
Industries)
Advisor Mototsugu Ito (IHI) *3
Yoshihiro Aburatani (Toshiba)
Ichiro Ariga (Professor emeritus, Keio
University) *3
Kozo Ban (Chubu Electric Power)
Yoshiyuki
Fujitsuna
(Engineering
Research Association for Supersonic
Transport Propulsion System)
Junzo Fujioka (National Institute of
Materials Science)
Ken-ichi Funazaki (Iwate University)
Masato Furukawa (Kyushu University)
Masataka Hashimoto (Kobe University)
Shigeru Hayashi (Hosei University)
Masafumi Hirota (Mie University)
Masakazu Hishinuma (Tokyo Gas)
Shinji Honami (Tokyo University of
Science) *3
Masahiro Ibi (Kawasaki Heavy
Industries)
Norihiko Iki (National Institute of
Advanced Industrial Science and
Technology)
Kyoji Inaoka (Doshisha University)
Toyohiko Ishimaru (Tokyo Electric
Power)
Kazuhiro Izaki (Kyushu Electric Power)
Shojiro Kaji (Teikyo University,
Professor emeritus, The University of
Tokyo)
Yasutomo Kaneko (Ryukoku University)
Hideaki Kaneta (Hitachi)
Nobuhide Kasagi (The University of
Tokyo)
Osamu Kawaguchi (Professor emeritus,
Keio University) *3
Genta Kawahara (Osaka University)
Yutaka Kawata (Osaka Institute of
Technology)
Yasuo Koizumi (Shinshu University)
Daisuke Koyama (Rolls-Royce Japan)
Tatsuo Kuwabara (Japanese Aero
30
University)
Atsukuni Waragai (Honda R&D)
Toshinori Watanabe (The University of
Tokyo)
Yasuyuki Watanabe (IHI) *3
Hiro Yoshida (Kanagawa Institute of
Technology)
*3
Industries)
Koji Yasuda (Hitachi)
10.2 General Affairs Committee
Chair
Terutaka Fujioka (Central Research
Institute of Electric Power Industry)
Secretary Kazumitsu Takanishi (Kansai Electric
Power)
Takeharu Hasegawa (Central Research
Takeshi Kimura (Kawasaki Heavy
Industries)
Masao Mizukawa (Kansai Electric
Power)
Osamu Nozaki (Japan Aerospace
Exploration Agency)
Yutaka Oda (Osaka University)
Kazumasa Takata (Mitsubishi Heavy
Industries)
Former President of GTSJ
(in alphabetical order)
10. EXECUTIVE COMMITTEE
10.1 Executive Committee
Chair
Ken-ichiro Takeishi (Osaka University)
Co-Chair Mikio Sato (Central Research Institute of
Electric Power Industry)
Secretary Kei-ichi Okai (Japan Aerospace
Exploration Agency)
Advisor Osamu Kawaguchi (Professor emeritus,
Keio University) *3
Advisor Yukio Ohtsuki (Kawasaki Heavy
Industries) *3
Advisor Eisuke Outa (Professor emeritus, Waseda
University) *3
Advisor Teiichi Tamaki (IHI)
Advisor Keizo Tsukagoshi (Mitsubishi Heavy
Industries)
General Affairs Committee
Chair
Terutaka Fujioka (Central Research
Kazumitsu Takanishi (Kansai Electric
Power)
Program Committee
Chair
Yoshinobu Tsujimoto (Osaka University)
Makoto Yamamoto (Tokyo University of
Science)
Nobuhiko
Yamasaki
(Kyushu
University)
Financial Committee
Chair
Shigemichi Yamawaki (IHI)
Jun-ichi Hirokawa (IHI)
Exhibit Committee
Chair
Junichiro Masada (Mitsubishi Heavy
Industries)
Kazuhiro Kitayama (Toshiba)
Toyoaki Komori (Mitsubishi Heavy
Industries)
Events Committee
Chair
Yasuhiro Kinoshita (Kawasaki Heavy
Industries)
Atsushi Horikawa (Kawasaki Heavy
10.3 Program Committee
Chair
Yoshinobu Tsujimoto (Osaka University)
Secretary Makoto Yamamoto (Tokyo University of
Science)
Secretary Nobuhiko
Yamasaki
(Kyushu
University)
Fumiteru Akamatsu (Osaka University)
Ken-ichi Funazaki (Iwate University)
Hiroyuki Furukawa (IHI)
Industries)
Norihiko Iki (Advanced Industrial
Science and Technology)
Kuniyuki Imanari (IHI)
Eisaku Ito (Mitsubishi Heavy Industries)
Shigehiko Kaneko (The University of
Tokyo)
Masahide Kazari (Kawasaki Heavy
Industries)
Eiichi Koda (Central Research Institute
of Electric Power Industry)
Atsushi Makino (Japan Aerospace
Exploration Agency)
Toshihiko Nakata (Tohoku University)
Takashi Ogata (Central Research
Yutaka Ohta (Waseda University)
Youji Ookita (IHI)
Eiji Saito (Hitachi)
Takanori Shibata (Hitachi)
Hisato Tagawa (Hitachi)
Hideaki Tamaki (IHI)
31
Kazuhiko Tanimura (Kawasaki Heavy
Industries)
Tadashi Tanuma (Teikyo University)
Toshinori Watanabe (The University of
Tokyo)
Akira Yoshinari (Hitachi)
Yomei Yoshioka (Toshiba)
Industries)
Daisuke Segawa (Osaka Prefecture
University)
Koji Yasuda (Hitachi)
*3
10.4 Financial Committee
Chair
Shigemichi Yamawaki (IHI)
Secretary Jun-ichi Hirokawa (IHI)
Kosuke Kasahara (IHI)
Hiroyuki Sugiura (Kawasaki Heavy
Industries)
10.5 Exhibit Committee
Chair
Masada Junichiro (Mitsubishi Heavy
Industries)
Secretary Toyoaki Komori (Mitsubishi Heavy
Industries)
Secretary Kazuhiro Kitayama (Toshiba)
Hiroyuki Hara (Mitsubishi Heavy
Industries)
Toshihiko Inoue (Kawasaki Heavy
Industries)
Yosuke Ishikawa (Toshiba)
Takashi Kishine (Mitsubishi Heavy
Industries)
Masayoshi Nakamura (General Electric
International)
Makoto Nishimura (Hitachi)
Shinju Suzuki (Toshiba)
Toshiyuki Tomoda (Kansai Electric
Power)
Akitomo Tsukahara (Mitsubishi Heavy
Industries)
Hideshi Yamada (Japan Aerospace
Exploration Agency)
Naofumi Yamagata (Fuji Electric)
Tomohiko Yamamoto (Mitsubishi Heavy
Industries)
Toru Yanagisawa (Osaka Gas)
Takayuki Yoshikuni (IHI)
10.6 Events Committee
Chair
Yasuhiro Kinoshita (Kawasaki Heavy
Industries)
Secretary Atsushi Horikawa (Kawasaki Heavy
Industries)
Hiroshi Iwai (Kyoto University)
Akiko Matsuo (Keio University)
Hidehiko Nishumura (Mitsubishi Heavy
32
Former President of GTSJ
(in alphabetical order)
11. INFORMATION OF GAS TURBINE SOCIETY OF JAPAN (GTSJ)
ABOUT GTSJ
Gas Turbine Society of Japan (GTSJ), the sponsor of IGTC '11 Osaka, was founded in 1976, based on Gas
Turbine Committee of Japan established in 1972.
GTSJ aims to promote science, technology and social development through information exchange,
publication, technology research and other activities in the fields of all types of gas turbines, turbomachinery
and energy conversion.
GTJS members come from a wide variety of organizations; gas turbine manufacturing companies, users,
universities, national laboratories, and other corporations. Currently more than 2,000 individuals join GTSJ and
more than 100 corporate members support the activities of GTSJ.
MEMBERSHIP
Member: an individual who agrees to the objective of GTSJ.
Student Member: a student in university (master or bachelor course), technical college, or equivalent
organization, who agrees to the objective of GTSJ.
(A PhD candidate is classified into "Member".)
Corporate Member: an organization which agrees to the objective of GTSJ and supports its activity.
Table 3 Enrolment and Annual Membership Fees
Membership
Enrolment Fee
Member
Student Member
Corporate Member
500yen
500yen
1,000yen
Annual Membership
Fee
5,000yen
2,500yen
70,000yen/unit
PUBLISHING ACTIVITIES
Journal of the Gas Turbine Society of Japan (published bimonthly, in Japanese)
The Journal provides information on a variety of gas turbine and turbomachinery and energy technologies with
original technical papers, reports, and introductions of new products.
International Journal of Gas Turbine, Propulsion and Power Systems (JGPP) (Web journal, published
online in English)
JGPP covers a wide range of engineering information concerning gas turbines and related power systems.
URL: http://www.gtsj.org/english/jgpp/index.html
MEMBERSHIP APPLICATION
GTSJ offers several ways for you to apply for membership.
Download the membership application form from:
http://www.gtsj.org/admission/index.html
Please contact GTSJ office for detail.
OFFICE OF GTSJ
Office director: Katsuhide Hiraoka
Address: 7-5-13-402, Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023 JAPAN
Fax: +81-3-3365-0387
E-mai1: gtsj-office＠gtsj.org
http://www.gtsj.org/english/index.html
33
MEMO
34
MEMO
35
12. ACCESS TO CONGRESS VENUE & FLOOR GUIDE
ACCESS TO CONGRESS VENUE
Shuttle Bus Service of Rihga Royal Hotel is available from the Hotel Bus Stop near the Sakurabashi
Exit of JR Osaka Station (approximately 10 min for single way, free of charge). Maps of JR Osaka
Station are available at Osaka Station City's web site (http://osakastationcity.com/en/).
Nearest stations guide (from http://www.gco.co.jp/en/riyo/access.html)
■Keihan Nakanoshima Line: Next to Exit No.2 of Keihan Nakanoshima (Osaka International Convention Center)
Station.
■JR Loop Line: 10-minute walk from Fukushima Station.
■JR Tozai Line: 10-minute walk from Exit No.2 or No.3 of Shin-Fukushima Station.
■Hanshin Railway: 10-minute walk from Exit No.3 of Fukushima Station.
■Subway: 10-minute walk from Exit No.1 of the Central Line or Exit No.9 of the Sennichimae Line of Awaza
Station.
FLOOR GUIDE
Revised October 27, 2011
Issued October 21, 2011
Copyright (C) 2011 Gas Turbine Society of Japan

Program - 大阪大学小宮山グループ [Prof. Komiyama`s Group, Osaka

Transcription

Similar documents

Suku Kata Bahasa Jepang (hiragana)

junko mizuno

Presentazione dei Piatti creati dai migliori Chef

Program - Tohoku University

1.7 MB - IOP2014 - International Organization of Psychophysiology

The SUKIYAKI MEETS THE WORLD Festival

OFFICERS AND COUNCILLORS

Untitled

Scientific Program - 20th International Symposium on

Program - 大阪大学 小宮山グループ [Prof. Komiyama`s Group, Osaka

Transcription

Similar documents

Program - 大阪大学小宮山グループ [Prof. Komiyama`s Group, Osaka