safety information - Featherlite Ladders

Transcription

safety information
DUTY RATINGS
Featherlite Ladders are stringently tested to conform where applicable to the requirements of the Canadian Standards Association (CSA), and the
American National Standards Institute (ANSI). The appropriate rating is achieved through an extensive series of tests required by the various standards.
It is important to note one major difference between CSA and ANSI. Currently, the maximum CSA rating is Grade 1 - 250 lb; however ANSI encompasses
two additional ratings; Type 1A - 300 lb and Type 1AA - 375 lb. Several Featherlite product lines meet or exceed these additional ratings as noted
throughout the catalogue.
Duty
Rating
Rated
Use
CSA
Code
ANSI
Code
200 lb.
Light Duty Household
Grade 3
Type III
225 lb
Medium Duty Commercial
Grade 2
Type II
Rated
Use
CSA
Code
250 lb.
Heavy Duty Industrial
Grade 1
Type I
300 lb.
Extra-Heavy Duty Industrial
N/A
Type IA
375 lb.
Super-Heavy Duty Industrial
N/A
Type IAA
SAFETY TIPS
PROPER SET UP AND USE
Featherlite manufactures quality products for long and safe use, but
proper care must always be taken to ensure your safety. Even the best
ladders can be involved in accidents through neglect or improper
practices.
Step Ladders
Selection
• Take into account all potential uses for the product you are going
to purchase - make sure you have the necessary strength and
height for each job.
• Read the labels - Information is provided in detail for your safety
and protection.
• When making your decision on which duty rating you require,
ensure you allow for the combined weight of the user, clothing,
tools and any other materials.
Never exceed the maximum load rating.
Warning:
ANSI
Code
Make sure ladder is fully open and spreaders locked.
Set all feet on firm level surface. Do not place on unstable, loose, or
slippery surfaces. Place ladder where access is not obstructed. Do not
place in front of unlocked doors. Ladders are not intended to be used as
scaffolds.
Climb only front side of ladder. Face ladder when climbing up or down.
Maintain a firm grip. Use both hands in climbing.
Keep body centered between side rails. Do not overreach. Get down and
move ladder as needed.
Do not climb, stand, or sit above second step from top. Do not climb,
stand, or sit on spreader braces, ladder top, or utility shelf.
Do not straddle front and back. Do not climb from one ladder onto
another.
Avoid pushing or pulling off to side of ladder. Do not “walk” or “shift”
ladder while on it.
Metal ladders conduct electricity - Do not use where contact may be
made with live electrical circuits. Failure to follow proper instructions
could result in serious personal injury or death.
Extension & Straight Ladders
Inspection
• Always inspect your ladder before each use.
Do not place on unstable, loose, or slippery surfaces. Do not place
in front of unlocked doors. Ladders are not intended to be used
as scaffolds.
• Inspect for loose fasteners, broken, bent or cracked rails, rungs and
steps.
Secure base section before raising ladder to upright position. Do not
move ladder with fly section extended.
• Ensure moving parts are in good working order.
• Clean ladder of all foreign material. (oil, grease, ice etc.)
Extend fly section and engage rung locks. Make sure rope does not
create a tripping hazard or interfere with activity near ladder. Tying
bottom fly rung to adjacent base rung is recommended.
• Never use a damaged or worn ladder.
Extend and retract fly section from ground when no one is on ladder.
• Never use a ladder which has been exposed to excessive heat or
chemical corrosion.
Position ladder against upper support surface. Make sure ladder does not
lean to side. Ladder must make a 75 1/2° angle with the ground.
Before you climb...
• Do not use any ladder if you are in poor health, taking drugs, using
alcohol, or physically handicapped.
• Check your footwear - Do not use leather or any smooth
surfaced sole.
• Do not use in high winds or storm conditions.
• Do not set up over doorways.
■2
Duty
Rating
Set base of ladder on firm level surface.
To establish if ladder is at proper angle – Determine the distance along
the rail between the top and bottom support points of the ladder. Divide
the distance by 4. The result will be the horizontal distance between the
top and bottom support points.
Face ladder when climbing up or down. Maintain a firm grip. Use both
hands in climbing.
Keep body centered between side rails. Do not overreach.
Get down and move ladder as needed.
table of contents
fiberglass
SERIES:
6800, 6400.........................................................................4
6900, 6300.........................................................................5
5800, 6600.........................................................................6
6500, 5900.........................................................................7
9200, 6200.........................................................................8
5700, 5400.........................................................................9
6900, 6300.......................................................................10
5800.................................................................................11
6100, 6100PS, 6100M, 5700S ..........................................11
aluminum
4400, 3400.......................................................................12
2400, 1400.......................................................................13
4600, 3600, 3700.............................................................14
4500, 3500, 1300.............................................................15
4200D, 3200.....................................................................16
2200, 1200.......................................................................17
4100, 7100.......................................................................18
rolling steel
Rolling Steel .....................................................................19
3-way & articulating
2700, 3316, 3312, 3312FG...............................................20
telescopic
JAWS–JJT, JLT ...................................................................21
accessories &
replacement parts
...................................................................................22, 23
3■
fiberglass
SUPER-HEAVY DUTY FIBERGLASS STEP
375 lb
RATED
CSA Approved Grade 1, ANSI Type 1AA
THE BRUTE IS OUR STRONGEST AND MOST RUGGED LADDER, DESIGNED AND BUILT TO
WITHSTAND A LIFETIME OF DEMANDING INDUSTRIAL USE.
Extra strong non-conductive “C” channel side rails in high visibility safety yellow
Super tough copolymer top for strength and durability
Wide 3” slip-resistant serrated aluminum steps for safe climbing
Inside spreader arms complete with “wrap-around” sleeves that strengthen spreader-to-rail connection
and protect spreader arms during storage/loading/transit
• Each step is double braced with Zinc coated steel diagonal braces providing incredible strength and
stiffness
• Full rear "L” horizontal struts reinforced with Zinc coated steel diagonal braces offer maximum rigidity
• Heavy-duty aluminum "wrap-around" sleeves at base of rails for maximum protection
MODEL
SIZE
OPEN
HEIGHT
6804
6805
6806
6807
6808
6810
6812
4’
5’
6’
7’
8’
10’
12’
46”
57”
68”
79”
90”
113”
136”
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
23”
34”
45”
56”
67”
90”
113”
20”
21”
23”
24”
25”
29”
31”
28”
34”
39”
45”
50”
61”
72”
15
19
27
31
35
44
59
EXTRA-HEAVY DUTY FIBERGLASS STEP
300 lb
RATED
CSA Approved Grade 1, ANSI Type 1A
CANADA’S # 1 FIBERGLASS STEP LADDER
•
•
•
•
Durable non-conductive “C” Channel side rails in high visibility safety yellow
Slip-resistant serrated aluminum steps for safe climbing
Inside spreader arms complete with “wrap-around” brackets to strengthen spreader to rail connection
and protect spreader arms during storage/loading/transport
• Reinforced with Zinc coated steel diagonal braces on the front of every other step and double bracing
on bottom step for added strength and stiffness
• Full rear “L” horizontal struts reinforced with Zinc coated steel diagonal braces offer maximum rigidity
• Extra-large PVC rubber safety boots are heavy-duty and provide increased rail protection and slip-resistance
MODEL
SIZE
OPEN
HEIGHT
6402
6403
6404
6405
6406
6407
6408
6410
6412
2’
3’
4’
5’
6’
7’
8’
10’
12’
24”
34”
46”
57”
68”
79”
90”
113”
137”
■4
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
11”
11”
23”
34”
45”
56”
67”
90”
114”
17”
19”
20”
21”
23”
24”
26”
29”
32”
17”
23”
28”
34”
39”
44”
50”
61”
74”
8
12
15
19
23
27
30
38
52
6400
SERIE
S
6800
SERIE
S
•
•
•
•
fiberglass
EXTRA-HEAVY DUTY FIBERGLASS STEP
300 lb
RATED
THE ECONOMICAL TYPE 1A ALTERNATIVE
Durable non-conductive “C” channel side rails in high visibility safety yellow
Inside spreader arms complete with “wrap-around” sleeves that strengthen spreader-to-rail connection
and protect spreader arms during storage/loading/transit
• Rear horizontal struts every 22", Top and bottom struts reinforced with Zinc coated steel diagonal braces
• Reinforced with Zinc coated steel diagonal braces at top and bottom steps
• Extra-large PVC rubber safety boots are heavy-duty and provide rail protection and slip-resistance
MODEL
SIZE
OPEN
HEIGHT
6903
6904
6905
6906
6907
6908
6910
6912
3’
4’
5’
6’
7’
8’
10’
12’
34”
46”
57”
68”
79”
90”
113”
137”
HIGHEST
STANDING
HEIGHT
11”
23”
34”
45”
56”
67”
90”
114”
HEAVY DUTY FIBERGLASS STEP
CSA Approved Grade 1, ANSI Type 1
HIGH STRENGTH TO WEIGHT RATIO PROVIDES AN ECONOMICAL ALTERNATIVE
FOR GENERAL CONTRACTOR AND DIY WORK
•
•
•
•
•
•
•
Durable non-conductive “C” channel front rails in high visibility safety orange
Rugged outside Zinc coated steel spreader arms
Rear horizontal struts every 22", Top and bottom struts reinforced with Zinc coated steel diagonal braces
Reinforced with Zinc coated steel diagonal braces at top and bottom steps
Heavy-duty slip-resistant safety shoes
MODEL
SIZE
OPEN
HEIGHT
6304
6305
6306
6307
6308
6310
4’
5’
6’
7’
8’
10’
46”
57”
68”
79”
90”
113”
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
23”
34”
45”
56”
67”
90”
20”
21”
23”
24”
26”
29”
30”
34”
43”
44”
55”
61”
17
18
20
23
26
34
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
19”
20”
21”
23”
24”
26”
29”
32”
23”
28”
34”
39”
44”
51”
61”
74”
12
15
18
21
25
28
36
48
250 lb
RATED
6300
SERI
ES
6900
SERIE
S
•
•
•
•
5■
fiberglass
MEDIUM DUTY FIBERGLASS STEP
225 lb
RATED
THE PERFECT LADDER FOR DISCERNING “DIYers”
Durable non-conductive fiberglass side rails in high visibility safety red
Molded copolymer utility top for holding tools and paint accessories
Fold down utility tray
Reinforced with Zinc coated steel diagonal braces at top and bottom steps
MODEL
SIZE
5804
5805
5806
4’
5’
6’
OPEN
HEIGHT
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
23”
34”
45”
18”
20”
21”
30”
35”
44”
12
15
18
45”
57”
68”
EXTRA-HEAVY DUTY FIBERGLASS 2-WAY STEP
DOUBLE FRONT CONSTRUCTION ALLOWS TWO CLIMBERS TO ACCESS THE
LADDER FROM OPPOSITE SIDES
•
•
•
•
Wide aluminum top with extra-thick brackets for strength and durability
Inside spreader arms complete with “wrap-around” sleeves that strengthen spreader-to-rail
connection and protect spreader arms during storage/loading/transit
• Reinforced with Zinc coated steel diagonal braces on the front of every other step providing extra rigidity
• Extra-large PVC rubber safety boots are heavy-duty and provide rail protection and slip-resistance
MODEL
SIZE
OPEN
HEIGHT
6604
6606
6608
6610
6612
6614
6616
4’
6’
8’
10’
12’
14’
16’
45”
67”
90”
112”
135”
160”
184”
■6
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
23”
45”
67”
89”
112”
138”
162”
20”
23”
26”
29”
32”
36”
39”
38”
56”
72”
91”
109”
122”
139”
19
26
36
46
58
79
98
300 lb
RATED
6600
SERIE
S
5800
SERI
ES
•
•
•
•
•
•
•
fiberglass
EXTRA-HEAVY DUTY FIBERGLASS
PLATFORM STEP
300 lb
RATED
IDEAL FOR ALL TYPES OF FIXED HEIGHT WORK
6500
SERIE
S
•
•
•
•
•
•
•
Large safe and comfortable standing platform, 14” x 18”
Each step reinforced with Zinc coated steel diagonal braces providing strength and stiffness
Rear horizontal struts every 22” reinforced with Zinc coated steel brace offer maximum rigidity
MODEL
SIZE
OPEN
HEIGHT
6504
6505
6506
6508
6510
6512
4’
5’
6’
8’
10’
12’
46”
57”
68”
90”
113”
135”
VERTICAL
HEIGHT TO
PLATFORM
24”
35”
46”
68”
92”
115”
EXTRA-HEAVY DUTY FIBERGLASS
“GRATE” STEP
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
21”
23"
24”
26”
29”
31”
30”
36”
42”
53”
67”
75”
17
22
25
33
41
50
300 lb
RATED
•
•
•
•
Front and rear stabilizer feet provide safe surface contact on grated floors
Inside spreader arms complete with “wrap-around” brackets to strengthen spreader to rail connection
and protect spreader arms during storage/loading/transport
• Every other step reinforced with Zinc coated steel diagonal braces providing strength and stiffness
• Full rear "L" horizontal struts are reinforced with Zinc coated steel diagonal braces
• Stabilizers feature slip-resistant serrated rubber shoes
MODEL
SIZE
OPEN
HEIGHT
5906
5908
5910
5912
6’
8’
10’
12’
68”
90”
113”
137”
HIGHEST
STANDING
HEIGHT
45”
67”
90”
114”
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
35”
37”
40”
43”
39”
50”
61”
74”
27
35
44
59
5900
SERI
ES
DESIGNED FOR USE ON GRATED FLOORS
7■
fiberglass
SUPER-HEAVY DUTY FIBERGLASS EXTENSION
375 lb
RATED
CSA Approved Grade 1, ANSI Type 1AA
OUR STRONGEST AND MOST RUGGED FIBERGLASS EXTENSION LADDER, DESIGNED
AND BUILT TO WITHSTAND A LIFETIME OF DEMANDING INDUSTRIAL USE.
Durable non-conductive fiberglass side rails in high visibility safety yellow
Riveted rung to rail design maintains continuous strength of fibers and allows for easy repair
Slip-resistant serrated “D” rungs for safe climbing and comfort
Traditional raise from the rear pulley design
Premium heavy-duty rung locks for durability
Large heavy-duty pivot feet with slip-resistant rubber pads and ice pick
BASE
SECTION
MODEL
9216-AA
9220-AA
9224-AA
9228-AA
9232-AA
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
16’
20’
24’
28’
32’
13’
17’
21’
25’
28’
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
15”
15”
15”
15”
15”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
40
47
56
64
72
EXTRA-HEAVY DUTY FIBERGLASS EXTENSION
THE #1 CHOICE OF CONTRACTORS ACROSS THE COUNTRY
•
•
•
•
•
•
Slip-resistant serrated rungs for safe climbing (available in round or “D” profile)
Top cross over bar allows for ladder to be raised or lowered from front and provides torsional stiffness
Exclusive “1-Piece” foot assembly with spur wheel provides unequalled strength, durability and
torsion resistance.
“D” RUNG
ROUND RUNG
BASE
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
6216
6220
6222
6224
6228
6232
6216D
6220D
6222D
6224D
6228D
6232D
*6236D
*6240D
16’
20’
22’
24’
28’
32’
16’
20’
22’
24’
28’
32’
36'
40'
13’
17’
19’
21’
25’
28’
13’
17’
19’
21’
25’
28’
32'
35'
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
19”
19”
INSIDE
WIDTH
15”
15”
15”
15”
15”
15”
15”
15”
15”
15”
15”
15”
15 1/2”
15 1/2”
* Traditional raise from the rear pulley system
■8
FLY
SECTION
FLY
SECTION
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
17 3/4”
17 3/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
38
44
48
52
59
66
39
46
50
55
63
70
96
106
300 lb
RATED
6200 SE
RIES
9200-AA
SERIES
•
•
•
•
•
•
9200/6200/5700/5400 OPTIONS
Non-slip Strip Levelok Leg Leveler
Part #99322
Part # 21145
fiberglass
300 lb
RATED
A VARIATION OF OUR MOST POPULAR EXTENSION LADDER WITH PIVOT FEET
Slip-resistant serrated round rungs for safe climbing
Top cross over bar allows for ladder to be raised and lowered from front and provides torsional stiffness
BASE
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
5716
5720
5724
5728
5732
16’
20’
24’
28’
32’
13’
17’
21’
25’
28’
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
15”
15”
15”
15”
15”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
38
44
52
59
66
A VARIATION OF OUR MOST POPULAR EXTENSION LADDER WITH RAISE FROM REAR
PULLEY SYSTEM
•
•
•
•
•
•
FLY
SECTION
300 lb
RATED
Traditional raise from the rear pulley design
Premium heavy-duty rung locks
Exclusive “1-Piece” foot assembly with spur wheel provides unequalled strength, durability and
torsional stiffness
BASE
SECTION
FLY
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
5416
5420
5424
5428
5432
16’
20’
24’
28’
32’
13’
17’
21’
25’
28’
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
15”
15”
15”
15”
15”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
16 5/8”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
38
44
52
59
66
5400 SERI
ES
5700 SERI
ES
•
•
•
•
•
•
9200/6200/5700/5400 OPTIONS
Cable Hooks
Part # 99063
Swivel “V” Rung
Part # 99125
Pole Strap
Part # 99061
Rigid “V” Rung
Part # 99130
Rubber End Caps
Part # 99129
9■
fiberglass
300 lb
RATED
THE ECONOMICAL TYPE 1A ALTERNATIVE
Rung through rail design
Black ABS, high impact non-marring end caps
BASE
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
6916
6920
6924
6928
6932
16’
20’
24’
28’
32’
13’
17’
21’
25’
28’
17”
17”
17”
17”
17”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
16 1/2”
16 1/2”
16 1/2”
16 1/2”
16 1/2”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
14 1/4”
36
42
50
56
62
HEAVY DUTY FIBERGLASS EXTENSION
HIGH STRENGTH TO WEIGHT RATIO PROVIDES AN ECONOMICAL ALTERNATIVE FOR
GENERAL CONTRACTORS AND DIY WORK
•
•
•
•
•
•
Durable non-conductive fiberglass side rails in high visibility safety orange
BASE
SECTION
FLY
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
6316
6320
6324
16’
20’
24’
13’
17’
21’
17”
17”
17”
14 5/8”
14 5/8”
14 5/8”
16 1/2”
16 1/2”
16 1/2”
14 1/4”
14 1/4”
14 1/4”
31
36
43
■ 10
FLY
SECTION
250 lb
RATED
6300 SER
IES
6900 SER
IES
•
•
•
•
•
•
fiberglass
MEDIUM DUTY FIBERGLASS EXTENSION
225 lb
RATED
Durable non-conductive fiberglass side rails in high visibility safety red
Slip-resistant serrated “D” rungs for safe climbing
BASE
SECTION
FLY
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
5820
5824
20’
24’
17’
21’
17”
17”
15”
15”
16 1/4”
16 1/4”
14 1/2”
14 1/2”
32
38
EXTRA-HEAVY DUTY STRAIGHT LADDERS
300 lb
RATED
IDEAL FOR FIXED HEIGHT OR CONFINED SPACE APPLICATIONS
•
•
•
•
•
6100 and 6100PS Series feature the exclusive “1-Piece” foot assembly with spur wheel
providing unequalled strength, durability and torsion resistance
• 5700 Series feature large heavy-duty pivot feet with slip-resistant rubber pads and ice pick
• 6100M Series feature large heavy-duty duo feet with slip-resistant rubber pads and ice pick
MODEL
8’
10’
12’
14’
16’
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
15”
15”
15”
15”
15”
SIZE
APPROX.
OUTSIDE INSIDE WEIGHT
WIDTH WIDTH
lbs
6108M 8’
14 3/8” 12”
6110M 10’
14 3/8” 12”
*6112M 12’
14 3/8” 12”
*6114M 14’
14 3/8” 12”
*6116M 16’
14 3/8” 12”
*Meets or exceeds CSA Grade 1
18
21
24
28
32
18
21
24
28
32
MODEL SIZE
OUTSIDE
WIDTH
6108PS
6110PS
6112PS
6114PS
6116PS
8’
10’
12’
14’
16’
17 3/8”
17 3/8”
17 3/8”
17 3/8”
17 3/8”
MODEL SIZE
OUTSIDE
WIDTH
5708
5710
5712
5714
8’
10’
12’
14’
17 3/8”
17 3/8”
17 3/8”
17 3/8”
APPROX.
INSIDE WEIGHT
WIDTH
lbs
15”
15”
15”
15”
15”
19
22
25
29
33
APPROX.
INSIDE WEIGHT
WIDTH
lbs
15”
15”
15”
15”
18
21
24
28
5700 SERI
ES
6108
6110
6112
6114
6116
APPROX.
INSIDE WEIGHT
WIDTH
lbs
6100M SE
RIES
MODEL SIZE
OUTSIDE
WIDTH
6100 SERI
ES
6100PS SE
RIES
5800 SER
IES
•
•
•
•
•
•
11 ■
aluminum
EXTRA-HEAVY DUTY ALUMINUM STEP
300 lb
RATED
BUILT TO LAST IN ANY INDUSTRIAL APPLICATION
Extra-wide 3 1/2” slip-resistant serrated aluminum steps for safe climbing
Solid triangular braces on steps and rear horizontal struts provide unequalled rigidity
Rugged outside zinc coated steel spreader arms
Heavy duty hinged utility tray for holding tools and paint accessories (10"x 10")
MODEL
SIZE
OPEN
HEIGHT
4404
4406
4408
4410
4412
4414
4416
4’
6’
8’
10’
12’
14’
16’
46”
68”
90”
113”
135”
158”
181”
HIGHEST
STANDING
HEIGHT
24”
46”
68”
91”
114”
134”
160”
EXTRA-HEAVY DUTY ALUMINUM STEP
HIGH STRENGTH TO WEIGHT RATIO PROVIDES AN ECONOMICAL ALTERNATIVE
FOR GENERAL CONTRACTOR WORK
•
•
•
•
•
Heavy duty hinged utility tray for holding tools and paint accessories (10 x 10)
MODEL
SIZE
*3402
2’
*3403
3’
3404
4’
3405
5’
3406
6’
3408
8’
3410
10’
* no utility tray
■ 12
OPEN
HEIGHT
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
22”
34”
46”
57”
68”
91”
114”
11”
23”
24”
34”
46”
68”
91”
16”
17”
19”
20”
21”
24”
26”
18”
24”
29”
35”
41”
54”
66”
5
8
12
14
17
22
28
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
20”
23”
26”
29”
32”
35”
38”
29”
41”
54”
66”
78”
88”
102”
14
20
26
33
41
51
59
300 lb
RATED
3400
SERIE
S
4400
SERIE
S
•
•
•
•
•
•
aluminum
MEDIUM DUTY ALUMINUM STEP
225 lb
RATED
THE FINEST TRADESMAN STEP ON THE MARKET
Durable yet light weight extruded side rails
Outside “J“ spreader arms
Rubber slip-resistant safety shoes
MODEL
SIZE
OPEN
HEIGHT
2404
2405
2406
2407
2408
2410
4’
5’
6’
7’
8’
10’
45”
56”
67”
79”
90”
112”
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
24”
34”
45”
56”
67”
90”
18”
20”
21”
22”
24”
26”
31”
38”
44”
50”
56”
70”
9
11
13
16
19
23
LIGHT DUTY ALUMINUM STEP
200 lb
RATED
IDEAL FOR CHORES AROUND THE HOUSE
•
•
•
•
•
•
Strong yet light weight extruded side rails
Fold down utility tray
Outside pinch-proof spreader arms
Slip-resistant safety shoes
MODEL
SIZE
1404
1405
1406
4’
5’
6’
OPEN
HEIGHT
46”
57”
68”
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
24”
34”
44”
17”
19”
20”
26”
32”
37”
9
10
12
1400
SERIE
S
2400
SERI
ES
•
•
•
•
•
13 ■
aluminum
EXTRA-HEAVY DUTY ALUMINUM 2-WAY STEP
300 lb
RATED
DOUBLE FRONT CONSTRUCTION ALLOWS TWO CLIMBERS TO ACCESS THE
LADDER FROM OPPOSITE SIDES
Wide aluminum top with extra-thick brackets for strength and durability
Wide 3 1/2” slip-resistant serrated aluminum steps for safe climbing
Solid triangular step braces provide unequalled rigidity
Outside “J” spreader arms
MODEL
SIZE
4606
4608
4610
6’
8’
10’
HEAVY DUTY 2-WAY STEP
67”
90”
112”
46”
68”
90”
DOUBLE FRONT CONSTRUCTION ALLOWS TWO CLIMBERS TO
ACCESS THE LADDER FROM OPPOSITE SIDES
Aluminum top for strength and durability
SIZE
3604
3606
3608
3610
4’
6’
8’
10’
44”
68”
90”
112”
3700
SERI
ES
MODEL
OPEN
HEIGHT
■ 14
BASE
DEPTH
APPROX.
WEIGHT
lbs
56”
73”
89”
25
32
41
23”
26”
29”
250 lb
RATED
•
•
•
•
HIGHEST
OPEN STANDING BASE
HEIGHT
HEIGHT WIDTH
3600
SERIE
S
4600
SERI
ES
•
•
•
•
•
HIGHEST
STANDING
HEIGHT
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
23”
45”
67”
89”
19”
21”
24”
26”
39”
57”
72”
89”
14
21
29
36
HEAVY DUTY ALUMINUM SAWHORSE
THE IDEAL DRYWALL AND GENERAL CONTRACTOR’S ACCESS TOOL
•
•
•
•
•
Wide aluminum top for strength and durability
Rubber slip-resistant safety shoes
Different sizes can be combined for planking applications
MODEL
SIZE
3702
3703
3704
2’
3’
4’
OPEN
HEIGHT
23”
35”
47"
BASE
WIDTH
BASE
DEPTH
32”
34"
35"
25”
32”
39”
APPROX.
WEIGHT
lbs
10
14
19
aluminum
EXTRA-HEAVY DUTY ALUMINUM PLATFORM STEP
300 lb
RATED
IDEAL FOR INDUSTRIAL FIXED HEIGHT WORK
4500
SERI
ES
•
•
•
•
•
Large comfortable slip-resistant platform, 14” x 18”
Wide 3 1/2” slip-resistant serrated aluminum steps for safe climbing
Solid triangular braces on steps and rear horizontal struts provide unequalled rigidity
MODEL
SIZE
4506
4508
4510
4512
4514
4516
6’
8’
10’
12’
14’
16’
HEIGHT
OPEN
TO
HEIGHT PLATFORM
68”
93”
113”
135”
157”
180”
HEAVY DUTY ALUMINUM PLATFORM STEP
Large comfortable slip-resistant platform, 14” x 18”
MODEL
1300
SERI
ES
3504
3506
3508
3510
SIZE
4’
6’
8’
10’
46”
68”
90”
114”
BASE
WIDTH
23”
46”
68”
92”
200 lb
RATED
21”
24”
26”
29”
BASE
DEPTH
28”
42”
54”
66”
APPROX.
WEIGHT
lbs
24”
27”
30”
33”
36”
39”
42”
54”
65”
78”
87”
102”
22
28
35
43
52
60
3500
SERI
ES
IDEAL FOR IN FIXED GENERAL HEIGHT WORK
HEIGHT
OPEN
TO
HEIGHT PLATFORM
BASE
DEPTH
250 lb
RATED
•
•
•
•
46”
69”
92”
115”
136”
158”
BASE
WIDTH
APPROX.
WEIGHT
lbs
13
19
24
30
LIGHT DUTY ALUMINUM PLATFORM STEP
IDEAL FOR PAINTING AND CHORES AROUND THE HOUSE
•
•
•
•
•
1” tubular construction, makes this ladder light weight and allows for compact storage
Handrail with comfort foam grip for added safety
Fold down utility tray for tools and paint accessories
Rubber slip-resistant safety feet
Platform provides a large safe and comfortable standing area
MODEL
SIZE
OPEN
HEIGHT
1304
4’
55”
HEIGHT
TO
PLATFORM
BASE
WIDTH
BASE
DEPTH
APPROX.
WEIGHT
lbs
22”
18"
27"
8
15 ■
aluminum
EXTRA-HEAVY DUTY ALUMINUM EXTENSION
300 lb
RATED
OUR SIGNATURE PRODUCT—POSSIBLY THE BEST DESIGNED AND MANUFACTURED
LADDER IN THE WORLD
4200D SE
RIES
• Rigid “Box Section” side rails, unequalled for strength and durability
• Side-mounted rope pulley and slide guide system keeps rope clear of climbers feet and allows easy
raising and lowering of the fly section.
• Yellow ABS, high impact non-marring end caps
• Premium heavy-duty rung locks
• Slip-resistant serrated “D” rungs for safe climbing and comfort
• Heavy-duty ribbed swivel feet with ice pick
• 16’ through 28’ models have 2 7/8” x 7/8” side rails
• 32’ through 44’ models have 3 1/4” x 1” side rails
BASE
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
4216D
4220D
4224D
4228D
4232D
4236D
4240D
4244D
*4360
16’
20’
24’
28’
32’
36’
40’
44’
60’
13’
17’
21’
25’
29’
32’
35’
39’
50’
OUTSIDE
WIDTH
17”
17”
17”
17”
18 1/2”
18 1/2”
18 1/2”
18 1/2”
21 3/4”
INSIDE
WIDTH
15 1/4”
15 1/4”
15 1/4”
15 1/4”
16 1/2”
16 1/2”
16 1/2”
16 1/2”
19”
FLY
SECTION
OUTSIDE
WIDTH
14 1/2”
14 1/2”
14 1/2”
14 1/2”
15 7/8”
15 7/8”
15 7/8”
15 7/8”
16”
INSIDE
WIDTH
12 3/4”
12 3/4”
12 3/4”
12 3/4”
13 7/8”
13 7/8”
13 7/8”
13 7/8”
14”
*THREE SECTION EXTENSION, MIDDLE SECTION OUTSIDE WIDTH: 18 1/2”,
INSIDE WIDTH: 16 1/2”
*ROUND RUNG *NOT CSA APPROVED
RUGGED “I” BEAM EXTENSION SUITABLE FOR DEMANDING INDUSTRIAL APPLICATIONS
• Heavy-duty “I” beam construction, 3 1/16” x 1 1/4” rails provide stability, torque resistance and
high strength to weight ratio
• Heavy-duty serrated rungs prevent slipping for safe and sure climbing. (available in round or “D” profile)
• Yellow ABS, high impact non-marring end caps
• Premium heavy-duty rung locks
• Heavy-duty ribbed swivel feet with ice picks
“D” RUNG
BASE
SECTION
FLY
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
3216D
3220D
3224D
3228D
3232D
3236D
3240D
16’
20’
24’
28’
32’
36’
40’
13’
17’
21’
25’
29’
32’
35’
17 3/4”
17 3/4”
17 3/4”
17 3/4”
17 3/4”
17 3/4”
17 3/4”
15 1/4”
15 1/4”
15 1/4”
15 1/4”
15 1/4”
15 1/4”
15 1/4”
16 1/8”
16 1/8”
16 1/8”
16 1/8”
16 1/8”
16 1/8”
16 1/8”
13 5/8”
13 5/8”
13 5/8”
13 5/8”
13 5/8”
13 5/8”
13 5/8”
31
36
43
53
60
69
77
■ 16
300 lb
RATED
3200 SER
IES
EXTRA-HEAVY DUTY ALUMINUM EXTENSION
APPROX.
WEIGHT lbs
29
37
44
50
69
78
86
94
128
aluminum
FLY
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
3216
3220
3224
3228
3232
3236
3240
16’
20’
24’
28’
32’
36’
40’
13’
17’
21’
25’
29’
32’
35’
17 5/8”
17 5/8”
17 5/8”
17 5/8”
17 5/8”
17 5/8”
17 5/8”
15 1/8”
15 1/8”
15 1/8”
15 1/8”
15 1/8”
15 1/8”
15 1/8”
16”
16”
16”
16”
16”
16”
16”
13 1/2”
13 1/2”
13 1/2”
13 1/2”
13 1/2”
13 1/2”
13 1/2”
29
34
41
50
57
66
73
MEDIUM DUTY ALUMINUM EXTENSION
225 lb
RATED
THE FINEST TRADESMAN EXTENSION ON THE MARKET
2200 SERI
ES
•
•
•
•
•
Sturdy extruded “C” channel construction
Black ABS, high impact, non-marring end caps
Premium heavy-duty rung locks
Heavy-duty swivel feet with ice picks
BASE
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
2216
2220
2224
2228
2232
2236
2240
16’
20’
24’
28’
32’
36’
40’
13’
17’
21’
25’
29’
32’
36’
15 1/4”
15 1/4”
15 1/4”
15 1/4”
17 3/16”
17 3/16”
17 3/16”
13 3/8”
13 3/8”
13 3/8”
13 3/8”
15 1/4”
15 1/4”
15 1/4”
14 3/8”
14 3/8”
14 3/8”
14 3/8”
16 3/8”
16 3/8”
16 3/8”
LIGHT DUTY ALUMINUM EXTENSION
IDEAL FOR CHORES AROUND THE HOUSE
Strong extruded “C” channel construction
High impact, non-marring end caps
Swivel feet with ice picks
BASE
SECTION
INSIDE
WIDTH
12 1/2”
12 1/2”
12 1/2”
12 1/2”
14 3/8”
14 3/8”
14 3/8”
APPROX.
WEIGHT lbs
24
31
36
41
50
60
68
200 lb
RATED
•
•
•
•
FLY
SECTION
FLY
SECTION
MODEL
SIZE
MAX. OPEN
LENGTH
OUTSIDE
WIDTH
INSIDE
WIDTH
OUTSIDE
WIDTH
INSIDE
WIDTH
APPROX.
WEIGHT lbs
1216
1220
1224
16’
20’
24’
13’
17’
21’
13 1/4”
13 1/4”
13 1/4”
11 3/8”
11 3/8”
11 3/8”
12 3/8”
12 3/8”
12 3/8”
10 1/2”
10 1/2”
10 1/2”
20
24
30
1200 SER
IES
ROUND RUNG
BASE
SECTION
17 ■
aluminum
EXTRA-HEAVY DUTY ALUMINUM
STRAIGHT LADDER
300 lb
RATED
BUILT FOR DEMANDING INDUSTRIAL APPLICATIONS
Rigid “Box Section” side rails, unequalled for strength and durability
Yellow ABS, high impact non-marring end caps
Slip-resistant round serrated aluminum rungs
Heavy-duty ribbed swivel feet
MODEL
SIZE
OUTSIDE WIDTH
INSIDE WIDTH
APPROX. WEIGHT lbs
4108
4110
4112
4114
4116
4118
4120
4122
4124
8’
10’
12’
14’
16’
18’
20’
22’
24’
14 5/8”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
15 3/4"
15 3/4"
12 7/8”
12 7/8”
12 7/8”
12 7/8”
12 7/8”
12 7/8”
12 7/8”
13 3/4"
13 3/4"
13
16
19
22
25
28
31
41
44
HEAVY DUTY STRAIGHT LADDER
HIGH STRENGTH TO WEIGHT RATIO PROVIDES AN EASILY PORTABLE INDUSTRIAL
STRAIGHT LADDER
•
•
•
•
•
•
Heavy duty “C” channel rail construction
Side rails: 2 1/2” x 1” for sizes 8’ through 14’
Side rails: 3” x 1” for sizes 16’ through 20’
Heavy-duty ribbed swivel feet
MODEL
SIZE
OUTSIDE WIDTH
INSIDE WIDTH
APPROX. WEIGHT lbs
7108
7110
7112
7114
7116
7118
7120
8’
10’
12’
14’
16’
18’
20’
16 3/4”
16 3/4”
16 3/4”
16 3/4”
16 3/4”
16 3/4”
16 3/4”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
14 5/8”
10
13
15
18
23
27
29
■ 18
250 lb
RATED
7100 SERI
ES
4100 SERIES
•
•
•
•
rolling steel
ROLLING STEEL
300 lb
RATED
MEETS OR EXCEEDS CSA SAFETY STANDARDS AS PER ANSI A14.7
NO HAND RAILS SERIES
42” HAND RAILS SERIES
•
•
•
•
•
•
•
•
•
15” Platform depth
1” 16 ga. Round tubing construction
3” Swivel spring loaded casters
24” wide x 7 1/2” deep non-slip
perforated step material
• 26” Overall width
• No Hand rail
• Painted blue enamel
15” Platform depth
1” 16 ga. Round tubing construction
6” x 2” Polyolefin rear wheels
5” x 1 1/4” RSX rubber swivel casters
24” Wide x 7 1/2” deep non-slip
perforated step material
• 42” High hand rail
• Painted blue enamel
NO HAND RAILS SERIES
MODEL
STEPS
PLATFORM
HEIGHT
1NH
2NH
3NH
4NH
5NH
1
2
3
4
5
9”
18”
27”
36”
45”
STEP
WIDTH
24”
24”
24”
24”
24”
BASE
WIDTH
26”
26”
26”
26”
26”
BASE
DEPTH
19”
24 1/2”
29 1/2”
32 1/2”
38”
WHEEL
ASSEMBLY
3”
3”
3”
3”
3”
Spring Loaded Caster
SHIPPING
SIZE
APPROX
WEIGHT
lbs
26” x 20” x 10”
26” x 24” x 18”
26” x 31” x 27”
26” x 40” x 36”
26” x 44” x 45”
30
40
53
62
95
SHIPPING
SIZE
APPROX
WEIGHT
lbs
42” HAND RAILS SERIES
MODEL
STEPS
PLATFORM
HEIGHT
1H
2H
3H
4H
5H
6H
7H
8H*
9H*
10H*
11H*
12H*
13H*
14H*
15H*
16H*
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
9”
18”
27”
36”
45”
54”
63”
72”
81”
90”
99”
108”
117”
126”
135”
144”
STEP
WIDTH
BASE
WIDTH
BASE
DEPTH
WHEEL
ASSEMBLY
24”
24”
24”
24”
24”
24”
24”
28”
28”
28”
28”
28”
28”
28”
28”
28”
26”
26”
26”
33”
33”
33”
33”
36”
36”
36”
36”
36”
36”
36”
36”
36”
19”
24 1/2”
29 1/2”
34 1/2”
40”
45 1/4”
50 1/2”
55 3/4”
61”
66 1/4”
71 1/2”
76 1/4”
82”
87 1/4”
92”
97 3/4”
3” Spring Loaded Caster
5’ Front Caster, 6” Rear Wheels
26” x 20” x 52”
26” x 24” x 60”
26” x 31” x 69”
33” x 40” x 78”
33” x 44” x 87”
33” x 44” x 9’
33” x 44” x 10’
36” x 37” x 10 1/2’
36” x 37” x 11’
36” x 37” x 12’
36” x 37” x 13’
36” x 37” x 14’
36” x 37” x 15’
36” x 37” x 15 1/2’
36” x 37” x 16 1/2’
36” x 37” x 17’
32
42
55
87
97
111
122
142
154
166
178
190
202
214
226
238
* collapsed for shipping
19 ■
3-way & articulating
HEAVY DUTY ALUMINUM 3-WAY
250 lb
RATED
A TOUGH VERSATILE LADDER FOR TRADESMEN OR DIY’ers
MODEL
2706
2707
2708
ALUMINUM ARTICULATING LADDER
MODEL 3316 - CSA Approved Grade 1, ANSI Type 1A
MODEL 3312 - CSA Approved Grade 1, ANSI Type 1
STEP
SIZE
EXTENSION
SIZE
MAX. EXTENSION
OPEN LENGTH
6’
7’
8’
12’
14’
16’
9’
11’
13’
300 lb
RATED
•
•
•
•
•
•
•
Compact and multifunctional
Sturdy “C” channel rail construction
Serrated rungs prevent slipping for safe sure climbing
Positive, visual hinge locking indication in any position
Folds easily for storage and transport
3316 has stabilizer feet on each end that provide superior stability
3312 has flared ends for excellent stability
MODEL
STEP
SIZE
EXTENSION
SIZE
SCAFFOLD
SIZE
APPROX.
WEIGHT lbs
3312
3316
6’
8’
12’
16’
3’
4’
26
46
HEAVY DUTY FIBERGLASS ARTICULATING LADDER
•
•
•
•
•
•
Compact and multifunctional
Sturdy non-conductive fiberglass “C” channel construction
Serrated rungs prevent slipping for safe sure climbing
Positive, visual hinge locking indication in any position
Folds easily for storage and transport
Stabilizer feet on each end that provide superior stability
MODEL
STEP
SIZE
EXTENSION
SIZE
SCAFFOLD
SIZE
APPROX.
WEIGHT lbs
3312FG
6’
12’
3’
30
■ 20
3312F
G SER
IES
A NON-CONDUCTIVE MULTI-PURPOSE LADDER FOR COMMERCIAL OR RESIDENTIAL JOBS
22
25
28
IES
3312 SER
A VERSATILE TOOL FOR A WIDE VARIETY OF COMMERCIAL AND RESIDENTIAL JOBS
APPROX.
WEIGHT lbs
250 lb
RATED
3316
SERIE
S
2700
SERIE
S
• Easily converts from a step ladder to extension to stairway ladder that locks surely and
safely into all positions
• Durable extruded aluminum rails and slip-resistant serrated steps and rungs
• Heavy duty hardware to ensure rigidity in all positions
• Fixed rubber safety shoes on front section, swivel feet on back section
• Black ABS, high impact non-marring end caps
250 lb
RATED
telescopic
JAWS TELESCOPIC LADDER
250 lb
RATED
JLT SERIES - CSA Approved Grade 1, ANSI Type 1AA
JJT SERIES - CSA Approved Grade 1, ANSI Type 1
•
•
•
•
•
•
•
•
•
•
JJT S
ERIES
THE STRONGEST BEST BUILT MULTI-POSITION LADDER
SYSTEM AVAILABLE
Compact and multifunctional, Replaces all conventional ladders
Easily folds for storage or transport
Flared ends with slip-resistant feet provide superior stability in any position
Polymer rung locks are virtually indestructible
Extra deep side rails make Jaws stiffer and stronger
Mechanical interlocking tooth hinges for superior strength and 5 locking positions
Extruded 6061-T6 marine alloy—for strength and corrosion resistance
Welded outer rungs
JLT Series has Extra-strong “Box-beam” rails for maximum strength and durability
JJT Series has wide inner steps for comfort
JLT S
ERIES
375 lb
RATED
Leg Leveler Part #JLL30
FOLDED
MODEL HEIGHT
JJT 14
JJT 17
3’5”
4’5”
JLT 18
JLT 22
JLT 26
4’9”
5’9”
6’9”
Wall Stand-off Part #WSO40
EXTENSION
RANGE
WORKING
HEIGHT
6’3” to 10’6”
7’3” to 14’6”
6’3” to 14’0”
7’3” to 17’0”
9’0” to 15’0” 9’0” to 18’0”
11’0” to 19’0” 11’0” to 22’0”
13’0” to 23’0” 13’0” to 26’0”
Step/Tray Part #JIS10 *JLT Series Only
STEP
LADDER
RANGE
SCAFFOLD
HEIGHT
APPROX.
WEIGHT
lbs
3’2” to 5’3”
4’2” to 7’3”
Up to 3’
Up to 4’
21
26
4’6” to 7’6”
5’6” to 9’6”
6’6” to 11’6”
Up to 4’
Up to 5’
Up to 6’
36
41
50
Utility Tray Part #JUT20
21 ■
accessories & replacement parts
Utility Tray Part #99163
fits 6300, 6400, 6900 Series
Utility Tray Part #99019
fits 2400 Series
LEVELOK Leg Leveler
Part #21145
P= PAIR
Wall Stand-off
Part #WSO40
Wall Stand-off
Part #99066
Wheels
Part #99326
Roof Ladder Lock
Part #99062
S=SINGLE
FIBERGLASS
STEPS
6900
6800
6600 (4' to 12')
6600 (14' & 16')
6500
6400
6300
5900
5800
TOP CAP SAFETY FEET
S
4
99180
99180
N/A
N/A
N/A
99180
99180
99180
99002
99003
99105
99004
99005
99105
99003
99105
N/A
99105
UTILITY TRAY
S
ALUMINUM
STEPS
TOP CAP
S
SAFETY FEET
4
99163
N/A
N/A
N/A
N/A
99163
99163
99163
99006
4600
4500
4400
3700
3600
3500
3400
2400
1400
N/A
N/A
99180
N/A
N/A
N/A
99181
99002
99016
99104
99102
99102
99139
99106
99105
99105
99101
99008
* Spreader arms are available, please specify left or right side, model and size
* NEW RUBBER BOOT FOR 6400, 6900, AND 6600
FIBERGLASS EXTENSIONS
9200
6900
6300
6200
6200D (16' to 32')
6200D (36' & 40')
5800
5700
5400
END CAP
P
99122
99122
99122
99122
99122
99018
99122
99122
99122
N/A
N/A
99164
N/A
N/A
N/A
99163
99019
99007
* Spreader arms are available, please specify left or right side, model and size
PULLEY
& BRACKET
S
RUNG
LOCKS
P
99017
99011
99011
99009
99009
99010
99011
99009
99135-ET
99186
99186
99186
99128
99186
21122
99186
99128
99128
FLY
RUNG
S
BASE
RUNG
S
SAFETY
FEET
P
99170-F
N/A
N/A
99171-F
99170-F
99012-F
N/A
99171-F
99171-F
99170-B
N/A
N/A
99171-B
99170-B
99012-B
N/A
99171-B
99171-B
99131
99131
99131
99123
99123
99014
99131
99131
99123
* Replacement rope available, please specify ladder model and size when ordering (available in White Marine Grade, Yellow Poly or Black Poly.)
■ 22
UTILITY TRAY
S
replacement parts
ALUMINUM EXTENSIONS
4360
4200D (16' to 28')
4200D (32' to 44')
3200
3200D
2200 (16' TO 20')
2200 ( 24' TO 40')
1200
END CAP
P
RUNG LOCKS
P
SAFETY FEET
P
99155
99118
99119
99113
99113
99172
99173
99015
99191
99185
99185
99128
99186
99186
99186
99186
99116
99116
99116
99114
99114
99109
99109
99109
Top Cap
Utility Tray
Spreader Arms
* Replacement rope available, please specify ladder model and size when ordering
(available in White Marine Grade,Yellow Poly or Black Poly.)
Safety Feet
End Caps
STRAIGHTS
7100
6100
6100PS
6100MH
5700
4100 (8' to 10')
4100 (22' to 24')
END CAP
P
RUNG
S
FEET
P
99172
99122
99122
99122
99122
99118
99119
N/A
99171-B
99171-B
99171-F
99171-B
N/A
N/A
99108
99123
99123
99127
99131
99116
99116
Pulley & Bracket
Rope
* Replacement rope available, please specify ladder model and size when ordering
(available in White Marine Grade,Yellow Poly or Black Poly.)
Rung Locks
Fly Rung
Base Rung
Safety Feet
JAWS
COMPLETE` KNOB
HINGE
AND
LOCK
BOLT
S
S
JLT26
JLT22
JLT18
JJT17
JJT14
ZZZ06
ZZZ06
ZZZ06
ZZZ13
ZZZ13
ZZZ02A
ZZZ02A
ZZZ02A
ZZZ02B
ZZZ02B
ELD
S
SPREADER
BAR
S
RUNG
END CAP
S
OUTSIDE
SECTION
S
OUTSIDE
FOOT
S
INSIDE
FOOT
S
ZZZ07
ZZZ07
ZZZ07
ZZZ14
ZZZ14
ZZZ10
ZZZ10
ZZZ10
ZZZ10
ZZZ23
ZZZ03
ZZZ03
ZZZ03
ZZZ03
ZZZ03
ZZZ26
ZZZ12
ZZZ11
ZZZ19
ZZZ18
ZZZ08
ZZZ08
ZZZ08
ZZZ15
ZZZ15
ZZZ09
ZZZ09
ZZZ09
ZZZ16
ZZZ16
ZZZ06
ZZZ13
MULTIS
KNOB AND BOLT
S
Foot
S
3312
3316
3312FG
ZZZ02B
ZZZ02A
ZZZ02B
ZZZ21
N/A
N/A
ZZZ02
ZZZ07
ZZZ14
ZZZ11
ZZZ12
ZZZ18
ZZZ26
ZZZ19
ZZZ08
ZZZ15
ZZZ03
ZZZ09
ZZZ16
23 ■
Keep
Safe
Do you have a specific ladder safety question?
…Or wish to contribute to ladder safe-work practices?
Contact the Featherlite “Ladder Expert”
Call 1-800-867-5233 8:00 am – 4:00 pm Monday to Friday
OR
Visit our Website at www.featherlite.ca
HEAD OFFICE:
100 Engelhard Drive
Aurora, Ontario, Canada L4G 3V2
Tel: (905) 727-0031
Fax: (905) 727-7271
B.C. REGIONAL WAREHOUSE:
7205 Brown Street, Unit 109
Delta, British Columbia, Canada V4G 1G5
Tel: (604) 940-2972
Fax: (604) 940-2973
QUEBEC REGIONAL WAREHOUSE:
2001 Francis Hughes
Laval, Quebec, Canada H7S 2G2
Tel: (450) 668-4610
Fax: (450) 668-4611

safety information - Featherlite Ladders

Transcription

Similar documents

Featherlite Catalogue Eng256

Two New Benchtop Planers

MiPOD How to use - Pop Up Products Limited

SX GP Universal Examination Table

Putnam Ladder Form2.indd

Pole Mounted Obstruction Light

armor core

410 Door Closer Sell Sheet

WALK-IN VAN - Spartan Motors, Inc.

Brochure - Monkey Tower