BETASEAL™ X2500 Adhesive For Fast, High

GLASS REPLACEMENT SYSTEMS
BETASEAL™ X2500 Adhesive
For Fast, High-Strength Glazing
BETASEAL™ X2500 adhesive is specified by OEMs worldwide – a great reason to
use it for glass replacement. This high-modulus two-component system helps restore
the vehicle’s structural integrity to OEM level or better. And its fast safe drive-away
time (SDAT) makes your customers happy and your business more efficient.
BETASEAL X2500 adhesive can be used to replace windscreens, rear screens,
quarter glass and sunroofs.
Advantages
•
•
•
•
•
•
•
•
Meets globally mandated safety requirements for front impact and roof crush
60-minute SDAT
No additional processing or heating required
High shear modulus improves body stiffness and torsional rigidity of the
entire vehicle by up to 40 percent
Non-conductive for high-quality radio, phone and satellite navigation reception
Dynamically mixed system ensures superior, reliable mixing ratio and high
visco-elasticity for safe and high-quality glass replacement
Meets OEM standards and international safety requirements
Full cure properties after just a few hours through the chemical
curing process
BETASEAL X2500 is part of a simple, superior
system that includes BETACLEAN™ 3300 cleaner
and BETAPRIME™ 5504 all-in-one primer. Just
clean, prime and apply adhesive. With BETAPRIME
5504 all-in-one primer you don’t have to worry about
the quality of the replacement glass or ceramic.
B E T A S E A L ™
X 2 5 0 0
GLASS REPLACEMENT SYSTEMS
Three Great Products, Three Simple Steps
BETACLEAN 3300 removes dirt, general surface contaminants, fingerprints
and other deposits. BETAPRIME 5504 is the test-proven primer for every
common substrate, with superior UV protection for a long-lasting bond.
BETASEAL X2500 is simple and easy to apply, and it enhances the torsional
stiffness of the car body up to 40 percent.
Dow Automotive Systems – Your Best Partner, Always at Your Side
When you use BETASEAL™ X2500 adhesive, you’re not just helping to assure
your customer of a long-lasting, safe, leak-free glass replacement. You’re
teaming up with a partner who gives you the best support available.
1. Use BETACLEAN™ 3300 cleaner to
remove oil and dirt deposits, to ensure
a secure seal between the glass and
pinchweld.
The best training. The best technical information. The best response to your
questions and needs. All from Dow Automotive Systems
The Worldwide Leader in Polyurethane Glazing Technology
Dow Automotive Systems developed the first direct-glazing adhesive system
more than 40 years ago. Today, more than half of all new vehicles built
worldwide use glass bonding systems from Dow Automotive Systems – more
than 30 million per year.
When you use products from Dow Automotive Systems, you can assure your
customers that they are getting OEM-approved and certified quality to restore
their vehicles to their original condition.
Your customers count on you for reliable, high-quality glazing – and for their
safety. With products like BETASEAL X2500 adhesive, it’s easy to give them
factory-quality work, while keeping your materials costs low and making the
work go faster and easier.
2. After cutting away old adhesive, use
BETAPRIME™ 5504 all-in-one primer for
all standard substrates (glass/ceramic,
remaining polyurethane bead, paint, RIM
encapsulation and pre-applied adhesive
system) for a safe, long-lasting, UV
resistant bond. Allow two minutes’
flash-off time.
3. Apply BETASEAL™ X2500 to the bonding area using your BETAGUN™.
About Us
Dow Automotive Systems provides technology- and materials-enabled solutions
for interior, exterior, powertrain, vehicle structural enhancement, acoustic
management, emissions control and aftermarket applications in the automotive
and commercial transportation industries.
BETASEAL X2500 adhesive is available in
a convenient kit.
NOTICE: No freedom from any patent owned by Dow or others is to be inferred. Because use conditions and
applicable laws may differ from one location to another and may change over time, the Customer is responsible
for determining whether products and the information in this document are appropriate for the Customer’s use
and for ensuring that the Customer’s workplace and disposal practices are in compliance with applicable laws
and other governmental enactments. Dow assumes no obligations or liability for the information in this document.
No warranties are given.
w w w. d o w a u t o m o t i v e . c o m
Dow Automotive Systems | Dow Europe GmbH | Bachtobelstrasse 3 | 8810 Horgen Switzerland
Telephone: +41-44-728-2111 | Fax: +41-44-728-2935 | Toll Free: 00800 3 694 6367*
In Finland: 990 3 694 6367 | In Italy: 800 783 825
*Toll free from Austria, Belgium, Denmark, France, Germany, Hungary, Ireland, The Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Dow Automotive Systems is a business unit of The Dow Chemical Company.
®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow
Form Number -299-51765-0710BBI