kl saltfjord - "K" Line Offshore

KL SALTFJORD
IMO No: 9470478
Call sign: LGFT
Design: AH 12 CD / STX NORWAY
Built. 2011
Equipment transfer between KL Sandefjord
and KL Saltfjord at location
AH 12 CD
AHTS designed by STX and delivered by STX NOL (Langsten), Norway
as multi-functional ultra deep water Anchor Handling Tug Supply and
service vessels. With a bollard pull of more than 39 0T, these vessels
are ideally suited for seabed operations, ploughing/trenching and pre lay
work. Fitted with an ROV hangar and ODIM LARS system for handling
of inspection- and work-class ROVs used in underwater operations.
The vessel are fitted with a hybrid configurated propulsion plant
serving two main propellers, one retractable plus two tunnel thrusters
forward and one retractable plus one tunnel thruster aft.
An ODIM Anchor Recovery Frame (ARF) for handling large anchors of
Torpedo type is fitted on aft deck and is flush with the main deck when
in stowed position. In addition to large chain and fibre rope capacity.
The vessels have two double jib RRM cranes with manipulators for Safe Deck
Operations. These cargo rail cranes are serving the entire working area of
the main deck. A 250T A-frame is available for subsea construction work.
Yard
no.
Name
IMO No.
Call
sign
Flag
Port of
Registry
Built
731
KL SANDEFJORD
9470466
lfxc
NOR
Arendal
2011
732
KL SALTFJORD
9470478
LGFT
NOR
Arendal
2011
All figures and data belived to be correct, but not guaranteed
Profile and plan
of tween deck and tank top
MAIN DECK
TWEEN DECK
TANK TOP
Tween deck
Tank top
250T SWL A-frame
Cargo rail cranes w/manipulators and wire anti-twist devices
ROV hangar + Launch And Recovery System (LARS)
Fibre rope storage reel
Rig chain locker
Technical data
GENERAL
MACHINERY & PROPULSION
Name
KL SALTFJORD
System
Diesel Mechenical / Diesel Electric / Hybrid
Design
AH 12 CD
Main Engine
2 x Wartsila 16V32 / 8000 / 7680kw 750/720rpm
Built by
STX Norway Langsten
PTO for Shaft Generator Forward
Yard No
732
Gear/Clutch Aft for CPP Mechanical Propulsion
Built2011
PTI for Hybrid Propulsion 2 x 4,500kw
IMO No
9470478
Generator Sets
5 x Caterpillar 3516C 2,188kw 1,800rpm
Call Sign
LGFT
AVK Generator 2,100kw
FlagNorway
PTO to A-C Alternator 690V
Port of Registry
Power
Installed: 27,000kw (36,710BHP)
Propullsion: 25,000kw (34,000BHP)
Propellers
2 x ø4,900mm CPP, 4 Blades, 130rpm
Rudders
2 x Flap Rudder, Spade Type
DNV ✠ 1A1, Offshore Service Vessel+ AHTS, SF, COMF-V(3), E0,
Control: Synchro and Split mode
DYNPOS-AUTR(IMO DP II), NAUT-OSV(A),
Forward Tunnel Thrusters
2 x Wartsila FT250 1,200kw
CLEAN DESIGN, DK(+), HL(2.8), TMON
Frequency Driven Electric Motor
Fixed Pitch Propeller
Forward Azimuth Thruster
1 x Wartsila FS225-MNR 1,500kw
Retractable
Frequency Driven Electric Motor
Arendal
Class
DIMENSION
LOA
95.2 m
Fixed Pitch Propeller
LPP
84.8 m
Aft Tunnel Thrusters
1 x Wartsila FT250 1,200kw
Breadth
24.0 m
Frequency Driven Electric Motor
Depth Main Deck
9.8 m
Fixed Pitch Propeller
Draught (Summer, at mark)
7.80 m
Aft Azimuth Thruster
1 x Wartsila FS225-MNR 1,500kw
Draught (Summer, Extreme)
8.85 m
Retractable
Frequency Driven Electric Motor
Height (Keel to Antenna)
44.5 m
Fixed Pitch Propeller
Deadweight (Summer)
4,246 T
GRT
8,360 T
NRT
2,508 T
DECK CAPACITY
PERFORMANCE
Max Speed
18.5 kts
143 m3/day
Economical Speed
10.0 kts
22 m3/day
Stand by at Sea
4 - 5 m3/day (1 x Azimuth + 1 x Generator)
Deck Area
750 m2 (Approx.)
DP12 m3/day (2 x Generators)
Max Payload
10 T/m2
In Port
Max Deck Cargo Weight
2,620 T
Figures are Avarage and Not Guaranteed
Cargo Rail Height
3.1 m
Reefer Container Sockets
12 x 230V
CARGO PUMPS
Fuel Oil
2 x Electric Two-Spindle Screw Pumps
3 m3/day
DYNAMIC POSITIONING SYSTEM
System
K-POS-21 (IMO DPII)
Class Approved for Closed Bus-Tie Operation
ERN99.99.99.84
250m3/h @90m
Reference Systems
Fresh Water
1 x DGPS
Kongsberg Seatex DPS 132
250m3/h @90m
1 x DGPS/DGNSS
Kongsberg Seatex DPS 232
Mud
1 x Fanbeam
MDL Laser MK4.2
75m3/h @90m
1 x Hipap
Kongsberg Maritime Hydroacoustic Hipap 501
Brine
1 x RADius System
Preparation only
1 x Centrifugal Pump with Air Ejector
2 x Electric Eccentric Screw Pumps
1 x Electric Eccentric Screw Pump
75m3/h @90m
Ballast/Drill Water
1 x Electric Two-Spindle Screw Pump
250m3/h @90m
CARGO PUMPS
ACCOMMODATION
Total
70 PERSONS
Single Cabins
20 with SAT TV + Internet Access
Double Cabins
25 with SAT TV + Internet Access
ROV Hanger
Starboard Side
Hospital1
ODIM LARS Overhead Type
Heave Conpensated
Offices
Bridge : 1 x Ship’s Office / Radio Station
3,000m of Water Depth
D Deck : 1 x Ship’s Office
Docking Head to Most Types of
Work/Observation ROV
C Deck : 1 x Client Office
ROV Control Room
On A Deck
A Deck : 1 x Client / Ship’s Office
ROV
IKM MERLIN WR 200
Electrical Work Class ROV 200 HP
Lounges
D deck : 2 A deck : 1 Sky Lounge with Feasible for 3,000 m water depth
SAT TV and Home Cinema Surround System
Gymnasium
1 x Conference Room
1 x Conference Room
1 with Full Equipment
All figures and data belived to be correct, but not guaranteed
ANCHOR HANDLING
AND TOWING EQUIPMENT
PROFILE AND MAIN DECK ARRANGEMENT
+ MIDSHIP AND STERN views
Main deck
Towing / AH winch x 2
Secondary winch x 2
Special handling drum
Spooling gear for towing/ AH winches
Spooling gear for secondary winches
Spooling gear for special handling drum
Fiber rope storage reels (below main deck)
Emergency towing wire drum (below main deck)
Chain pulling winch
Adjustable chain roller x 2
Rig chain shutes (detachable)
Rig chain locker x 6
Detachable pennant winder
Towing guide
Centering device x 2
MAIN DECK
Shark jaw x 2
Towing pins x 2 sets
Pop-up pins x 2
SWL 250T A-frame
Twin stern roller
Midship view
Stern view
Cargo Rail Cranes with wire anti-twist device + manipulator. PS+SB (SB side shown, PS symmetric)
Tugger winch midships x 2
Mooring / tugger winch aft x 2
Anchor Recovery Frame (ARF)
Cargo load/ discharge stations (FO, FW, BO, WB,
MUD, BRINE 5¨ male and SLOP 4¨ male)
GENERAL
Bollard Pull
397 T
Winch Control
Remote Control from Aft Bridge
Winch Maker
RRM Brattvaag
Winch Type
Towing/Anchor Handling Winch
2BSL600W/SL500W of Waterfall Type
Chain Locker Capacity
Number of Chain Lockers: 6
Volume: 171m3 / Locker (Total 1,026 m3)
76mm: 1,900 - 2,500m / Locker (Total 11,800 - 13,800m)
84mm: 1,700 - 2,100m / Locker (Total 10,800 - 11,800m)
Capacity is depending on age/quality of chain
ANCHOR HANDLING WINCHES (MAIN WINCHES)
Number2
Cable Lifter / Gipsy
2 x 76mm, 2 x 84mm, 2 x 120mm
Pull600T
Spooling Device
Max Side Load 62T
Static Brake holding load
950T @1st Layer
Equipped Emergency Release
Dimension
L: 2,500mm Drum Dia: 2,000mm
Flange Dia: 4,600mm
ROPE CAPACITY
Wire Rope
Synthetic Fibre Rope
76mm:
6,200m
150mm:
1,450m
77mm:
5,700m
160mm:
1,150m
83mm:
5,000m
180mm:
900m
84mm:
4,900m
203mm:
850m
90mm:
4,400m
210mm:
650m
102mm:
3,300m
DUTY
Step 1
Step 2
Step 3
Lowering
Dynamic Braking
1st Layer
600T @18.0m/min
367T @29.8m/min
154T @51.0m/min
51m/min
816T @62.0m/min
Mid Drum
393T @28.6m/min
240T @45.4m/min
101T @76.0m/min
76m/min
535T @94.5m/min
Full Drum
292T @38.4m/min
179T @61.0m/min
75T @103.0m/min
103m/min
398T @128.0m/min
SPECIAL HANDLING WINCH
Number1
Special Compartment
1,100mm
Pull500T
Spooling Device
Max Side Load 60T
Static Brake holding load
600T @1st Layer
Equipped Emergency Release
Dimension
L: 6,500mm Drum Dia: 3,500mm
Flange Dia: 5,400mm
ROPE CAPACITY (STORAGE PART)
Wire Rope
Synthetic Fibre Rope
Chain
76mm:
14,800m
150mm:
3,400m
76mm:
1,500 - 1,700m
77mm:
14,650m
160mm:
3,200m
84mm:
1,200 - 1,400m
83mm:
12,500m
180mm:
2,350m
84mm:
12,400m
203mm:
2,150m
90mm:
10,550m
210mm:
1,600m
102mm:
8,500m
DUTY
Step 1
Step 2
Step 3
Lowering
Dynamic Braking
1st Layer
500T @22.0m/min
305T @35.0m/min
128T @60.0m/min
61m/min
625T @72.0m/min
Mid Drum
420T @26.3m/min
256T @41.7m/min
107T @72.0m/min
73m/min
471T @85.0m/min
Full Drum
352T @31.3m/min
215T @49.7m/min
90T @85.0m/min
87m/min
367T @102.0m/min
TUGGER WINCH MIDSHIPS
SECONDARY WINCHES
Maker
RRM Brattvaag
Maker
RRM Brattvaag
Type
2ALM63170U, 170T
Type
LAKMX 132020
Number2
Number
2 (Port and Starboard Side)
Pull170T
SWL24T
Static Brake holding load
210T @1st Layer
Dimension
L: 1,000mm
Dimension
L: 4,500mm Drum Dia: 1,500mm Drum Dia: 900mm
Flange Dia: 4,500mm
Flange Dia: 2,300mm
Special Compartment
1,100mm
Wire Rope Capacity
24mm : 6,400m
Spooling Device
Max Side Load 23T
(on Each Drum)
32mm : 3,500m
77mm :
Duty on 1st Layer
24T @22.0m/min
16T @33.0m/min
Remote Control
RRM Portable Wireless
Control System
ROPE CAPACITY (STORAGE PART, EACH SIDE)
Wire Rope
Synthetic Fibre Rope
500m
76mm:
8,300m
150mm:
2,950m
77mm:
8,100m
160mm:
2,500m
83mm:
6,900m
180mm:
2,000m
84mm:
6,800m
203mm:
1,550m
TUGGER WINCH AFT
90mm:
5,700m
210mm:
1,250m
Maker
RRM Brattvaag
102mm:
4,400m
Max Weight: 200 MT
Type
LAKMX 41017
Number
2 (Port and Starboard Side)
DUTY
Dynamic Braking
SWL17T
1st Layer
170T @24.0m/min
210T @58.0m/min
Dimension
L: 800mm
Full Drum
64T @63.0m/min
80T @154.0m/min
Drum Dia: 460mm
Flange Dia: 900mm
Warping Head
L: 450mm Dia: 400mm
Wire Rope Capacity
24mm : 680m
SYNTHETIC FIBRE ROPE STORAGE REELS
Maker
ODIM (RRM)
(on Each Drum)
32mm : 340m
Number
2, Below Main Deck
Duty on 1st Layer
17T @29.0m/min
Dimension
L: 4,790mm
Remote Control
RRM Portable Wireless
Drum Dia: 1,000mm
Control System
Flange Dia: 3,950mm
Socket Compartment
L: 900mm
(Each Side)
Flange Dia:2,400mm
Synthetic Fibre Rope 150mm : 2,250m
Chain Size
70mm to 162mm
Capacity
160mm : 2,200m
Chain Pulling Wheels
2 x RRM Brattvaag AKMX 4185
(on Each Drum)
180mm : 1,750m
Chain Crossing Device
Possible to handle chain by winch
203mm : 1,150m
from Starboard to Port side
210mm : 1,100m
Chain Lockers and vice versa.
Chain Chutes
to/from Chain Lockers.
Partly Detachable.
Cable Lifters
2 x 76mm, 2 x 84mm, 2 x 120mm
SPARE TOWING WIRE DRUM/REEL
CHAIN HANDLING DEVICE
MakerRRM
Type
LALM 132020
Number
1, Below Main Deck
Dimension
L: 3,000mm
MakerRRM
Drum Dia: 1,000mm
Number2
Flange Dia: 2,700mm
MWL750T
Socket Compartment
L: 900mm
SWL500T
(Each Side)
Flange Dia:2,400mm
Dimension
Wire Rope Capacity
90mm : 1,800m
102mm : 1,450m
STERN ROLLER
L: 3,000mm Dia: 4,500mm
ANCHOR RECOVERY FRAME (ARF)
Maker
ODIM (RRM)
Dimension 7,500 x 9,140 x 6,620mm
MakerRRM
(LxWxH)
(Above Deck)
Type
SDO-Double Jib with Manipulators
SWL200T
+ Wire Anti Twist Devices
Remote control
CARGO RAIL CRANES
Number2
SWL
5T @3.2-10m / 3T @10-14.3m
TOWING PINS
Maker
RRM Brattvaag
Number2
MWL
BP 400T/600 Sideway Angle
Locking Arms MWL
BP 400T/300 Upwards Angle
Pulling Down Force
60T
STOP (POP-UP) PINS
MakerRRM
Number
2 Sets, Rotating Type
Dimension
L: 600mm Dia: 350mm
Position
In line with Stern Roller
SWL200T
SHARK JAWS
MakerRRM
Number2
MWL800T
Inserts
50-70mm 76-95mm
100-120mm 125-166mm
CENTERING DEVICE
MakerRRM
Number2
Working Width
2,000mm
Position
1,000mm to Each Side of
Shark Jaw Centre Line
PENNANT WINDER
Maker
RRM Brattvaag
Type
LAKCX 4108
Number1
Dimension
Dia: 830/2,310mm H: 630mm
Wire Rope Capacity
76mm : 200m
Tilt Rotator
360deg Rotation Tilt +/-40deg
Position
Main Deck Port Side
with Hyd Drive Unit
A-FRAME
MakerMacGregor
SWL250T
Inner Width
15,500mm (Leg)
10,500mm (Top)
Inner Height
11,100mm
Outreach
Aft: 8.5m Forward:4.55m
To Be Placed Before Use
ANCHOR HANDLING GEARS
Bracket for SDO Tool
Tools for Catching PCP Forerunner
Lasso for Bouys
AHTS Swivels
Spooling Sheave for Shark Jaw
Grapnel 250T SWL
Chaser 250T SWL
SMIT Bracket on bow 350T SWL (500T MBL)
All figures and data belived to be correct, but not guaranteed
Tank ARRANGEMENT
WB
WB
WB
WB
WB
WB
FO
FO
MUD/BRINE/FO
MUD/BRINE/FO
FW
FO
RIGCH/WB
RIGCH/WB
RIGCH/WB
RIGCH/WB
RIGCH/WB
RIGCH/WB
MUD/BRINE/FO
DW
FW
MUD/BRINE/FO
FO
WB
FO
WB/FW WB/FW
WB
WB
WB
WB
WB
Below main deck
WB
WB
WB
FO
WB
WB
FO
FW
FW
RIGCH/WB
RIGCH/WB
RIGCH/WB
WB
FW
DW
WB
RIGCH/WB
RIGCH/WB
RIGCH/WB
FW
FW
WB
FO
WB
FO
WB
WB
WB
Below tween deck
WB
WB
WB
WB
WB
FW
FW
DW
WB
WB
WB
FW
WB
WB
Below tank top
Fuel oil (FO)
Mud
Fresh water (FW)
Drill water (DW)
Water ballast (WB)
BRINE X/Z
RIGCH
Tank capacites
Tank capacites
WEIGHT 100% (MT)
Contents
VOLUME
100% (m3)
FORFRONT SB
FO
39,0
33,5
FORFRONT PS
FO
39,0
33,5
FOWT5 SB
FO
80,7
69,4
FOWT5 PS
FO
80,7
69,4
WT6 SB
FO
55,9
48,1
WT 6 PS
FO
55,9
48,1
FOOVERFLOW
FO
78,7
67,7
FOSETTL PS
FO
74,8
64,3
FOSERVICE SB
FO
64,0
55,0
FOSERVICE PS
FO
77,7
66,8
FOWT6 SB
FO/BRINE/MUD
210,9
FOWT6 PS
FO/BRINE/MUD
FOWT7 SB
FOWT7 PS
Tank ID
FUEL
OIL
(FO)
MUD
Brine
Cat.x
(BRIX)
Brine
Cat.Z
(BRIZ)
FRESH
WATER
(FW)
0,860
2,800
2,300
1,500
1,000
181,4
590,5
485,1
316,4
210,9
181,4
590,5
485,1
316,4
FO/BRINE/MUD
171,1
147,1
479,1
393,5
256,7
FO/BRINE/MUD
171,1
147,1
479,1
393,5
256,7
FOCT6
FO
110,7
95,2
FOCT7
FO
138,5
119,1
FOSETTL SB
FO
74,8
64,3
FOWT8 PS
FO
104,4
89,8
FOWT8 SB
FO
104,4
89,8
DBWT2 SB
FW
319,6
319,6
DBWT2 PS
FW
318,6
318,6
SKEGTK FW
FW
40,8
40,8
DBWT9 SB
FW
36,6
36,6
DBWT9 PS
FW
36,6
36,6
RIGCH1 SB
RIGCHA/WB
170,9
+
175,2
RIGCH1 PS
RIGCHA/WB
170,9
+
175,2
RIGCH2 SB
RIGCHA/WB
171,1
+
175,4
RIGCH2 PS
RIGCHA/WB
171,1
+
175,4
RIGCH3 SB
RIGCHA/WB
171,1
+
175,4
RIGCH3 PS
RIGCHA/WB
171,1
+
FOREPEAK
WB/DW
287,8
295,0
DBWT3 SB
WB
200,1
205,1
DBWT3 PS
WB
200,3
205,3
DBWT4 SB
WB
238,6
244,6
DBWT4 PS
WB
220,8
226,3
DBWT5 SB
WB
164,8
168,9
DBWT5 PS
WB
172,5
176,8
DBWT6 SB
WB
187,2
191,9
DBWT6 PS
WB
187,2
191,9
HEELING SB
WB
326,8
335,0
HEELING PS
WB
328,0
336,2
AFTPEAK SB
WB
146,9
150,6
S.G. (MT/m3)
AFTPEAK PS
RIG
CHAin
WATER
BALLAST
(WB)
DRILL
WATER
(DW)
1,025
1,000
175,4
287,8
WB
146,9
STAB1
WB/FW
316,8
316,8
STAB2
WB/FW
344,1
344,1
352,7
4607,6
287,8
4495,0
287,8
150,6
Total weight (MT, 100%)
1671,0
2139,2
1757,2
1146,2
1413,1
Total volume (m3, 100%)
1943,2
764,0
764,0
764,0
1413,1
324,7
1026,2
Remark
Drill water can be loaded to Water Ballast Tanks
All figures and data belived to be correct, but not guaranteed
Mail address:
P.O.Box 198
NO-4802 Arendal
Norway
Office address:
Kirkegaten 5
N-4836 Arendal
Norway
Graphic Design: Tress Design AS - www.tressdesign.no / Print: Birkeland Trykkeri AS / 062010
All information in this brochure is believed to be a correct representation of the vessel and its capacity at the time printing.
As the purpose of this brochure is for general information only, ”K” Line Offshore will not make any warranties about its accuracy.
Telephone: [+47] 40 00 06 68
e-mail: post@klineoffshore.no
w
ww.klineoffshore.no