Lashing strap - SAFETEX Hebe

Transcription

Lashing strap
ISH
E N G L ION
S
R
VE
MADE
IN GER
by SAF
Pricelist 2013
MANY
ETEX
MADE
SAFETEX lashing technology
IN G ER
by S A FE
MANY
TE X
SAFETEX´s range of lashing straps offers tailor-made solutions for securing every cargo.
We make the lashing strap from polyester (PES) with an average extension of max.5 %.
Tensioners (SE) and connectors (VE) are coordinated with the respective lashing systems.
SAFETEX´s lashing straps are produced at both of our locations in Stuttgart and Erfurt in
Germany according to EN 12195-2.
Identification Label
Traceability code
(to be sewn)
Fixed end (FE) and loose end (LE) as well as one-part polyester lashing
straps must be identified with a blue label according to EN 12195-2.
SAFETEX lashing straps also have their instructions for use sewn to
their loose and fixed ends.
Information on the label
LC =Lashing Capacity (permissible tension force) Maximum force for straight-line use and for which
a lashing strap has been designed for use.
SHF = Standard Hand Force (normal hand force)
Manual tension force of 50 daN applied on the
tensioning element.
STF = Standard Tension Force (normal tension force)
Remaining force after the grip of a ratchet has
been released = pre-tension force.
Basics of lashing strap systems
Two-part lashing straps
A 2-part lashing strap consists of two components: The fixed end with ratchet and connecting element (hook) and the loose end
with hook as connecting element.
Use: Strapping down and direct strapping in straight line.
Loose end length
Fixed end length
Total length
One-part lashing straps
A 1-part lashing strap consists of one strap band with a ratchet as tensioning element.
Use: Bundling or strapping.
Total length
Lashing straps in tandem technique
A 1-part lashing strap with double strap position. A double pulling force is achieved with it during strapping.
A lashing strap system that shows its advantages especially in heavy-duty strapping.
Total length
2
MADE
IN G ER
MANY
Pre-tensioning tester for ascertaining the optimum pre-tensioning force
The correct pre-tensioning force is an absolutely essential pre-requisite for securing the cargo
according to the regulations and to avoid the risk of it possibly sliding during transport. The actual
pre-tensioning forces of 50 mm or 35 mm wide lashing straps can be ascertained exactly with this
tester, which is easy to use.
It fulfills the requirements of:
VDI Guideline 2700
Securing cargo
on road vehicles
Product No.
STF-Test
DIN EN 12195-1
Calculating the
lashing forces
for bandwidth
35 and 50 mm
DIN EN 12195-2
Lashing straps made
from synthetic fibres
Certified by
TUL-LOG 01-2012
The actual pre-tensioning can be read off the scale easily.
The pre-tensioning tester is supplied
with a practical carrying case, in
which it can be stowed protected
and compactly.
3
MADE
IN G ER
by S A FE
MANY
TE X
Cargo Securing Methods
There are two kinds of securing a cargo: friction-fitted and form-fitted.
Friction-fitted securing is achieved by lashing straps that press the cargo onto the loading surface.
This leads to a higher frictional force, giving the part to be secured a better hold.
Form-fitted cargo securing is achieved by supports such as front or side wall supports that hold the cargo in place.
securing =
Optimal cargo
raps
rough lashing st
friction fit ted th
rough suppor t
+ form-fit ted th
ip mats
+ use of anti sl
Lashing down
When lashing down, the cargo is not secured by the lashing straps but by the clamping and frictional forces.
The pre-tension force is essential here.
be applied
Ratchets must
es can be
rc
of fset so the fo
buted!
ri
st
uniformly di
Diagonal strapping
Prerequisite: Four lashing straps. From the corners, they are clamped diagonally onto the loading surface.
In this case, each one of the four corners is secured by one lashing strap.
When strapping diagonally,
both lashing angles a and
b must be measured for
determining the course of
the lashing strap.
a
β
4
MADE
IN G ER
by S A FE
MANY
TE X
Oblique lashing
Prerequisite: Eight lashing straps. The tension
of the lashing straps from the cargo to the
loading surface takes place in a way that they
are perpendicular to all four edges of the loading
surface.
Sling lashes
The sling lash is a type of direct lash.
The lashing devices are located in front, behind or on the side of the cargo and then fixed to the anchoring points on the vehicle.
This type of securing the cargo originated in marine transport, where it is also described as head lashing or bight lashing.
Sling lashes with head slings
The head slings serve as a 'substitute for bulkheads' if the cargo cannot not be loaded longitudinally because of the distributed load.
A head sling can secure the cargo in the direction of travel or in the opposite direction. The lashing devices must be positioned in front
of the cargo or behind it and fixed to the anchoring points on the vehicle in the case of head slings.
With a lifting strap
Direction of travel
With an edge protector
Direction of travel
With a pallet
Direction of travel
The head sling serves to secure the cargo in the direction of travel in this case.
The cargo must be secured separately on the side and back.
Sling lashes with lateral slings
View from above
The lateral slings are
intended for securing
the cargo on the side.
The cargo has to be
secured separately in
the direction of travel
and in the opposite
direction.
Sling lashes serve as a 'substitute for bulkheads'
if the cargo cannot be loaded on the side in an
interlocking manner.
A lateral sling can only secure the cargo on the
side. The lashing devices are positioned around
the cargo and fixed to the anchoring points on the
vehicle.
Direction of travel
Combination of head slings and
lateral slings
View from above
A combination of head slings (green) and lateral
slings (lilac) offers the possibility of securing
the cargo by lashing it directly if it does not have
any anchoring points for the lashing devices.
Direction of travel
5
75
Lashing strap
with heavy-load ratchets mm For lashing down items with according to EN 12195-2 PES
MADE
IN G ER
by S A FE
a straight, direct connection
LC
10.000 daN
LC
10.000 daN
LC
5.000 daN
10-tonne lashing strap with pressure ratchet, tandem design
TKK
Product No.
75H-T-DR-TKK-
bandwidth
75 mm
e
2m
297,30
4m
319,10
Triangle/Forged hook combination
6m
340,90
8m
362,70
10 m
384,50
±1 m
10,90
10 t lashing strap with pressure ratchet, one-piece
Product No.
75H-1-DR-
bandwidth
75 mm
e
2m
65,10
4m
76,00
6m
86,90
8m
97,80
10 m
108,70
±1 m
5,50
5 t lashing strap with pressure ratchet, two-piece
1
2
3
TKK
Triangle/Forged hook
combination
Fig.
1
2
3
4
5
6
Product No.
75H-2-DR-TKK75H-2-DR-KHT75H-2-DR-KLH75H-2-DR-SPH75H-2-DR-TRS-
KHT
Forged hook with triangle
bandwidth
75 mm
75 mm
75 mm
75 mm
75 mm
E
E
E
E
E
2m
184,50
114,40
88,80
88,80
110,80
4
5
KLH
SPH
Claw hook
4m
195,50
125,30
99,70
99,70
121,70
J Hook, double
6m
206,50
136,30
110,60
110,60
132,70
8m
217,40
147,20
121,50
121,50
143,60
10 m
228,30
158,10
132,40
132,40
154,50
TRS
Screw-fit triangle
±1 m
5,50
5,50
5,50
5,50
5,50
04/2013 · All prices including VAT where required. Our Terms + Conditions as published at our internet website apply.
MANY
TE X
50
Lashing strap with long-handle ratchet
according to EN 12195-2 PES
mm
MADE
IN G ER
by S A FE
MANY
TE X
5 t lashing strap, one-piece
with pressure ratchet
with tension ratchet
LC
5.000 daN
STF
Druckratsche
Zugratsche
Product No.
50H-1-DL-
Product No.
50H-1-ZL-
bandwidth
50 mm
e
2m
18,70
4m
21,60
6m
24,50
8m
27,40
10 m
30,30
450 daN
±1 m
1,50
2,5 t lashing strap, two-piece
with pressure ratchet
LC
2.500 daN
STF
450 daN
with tension ratchet
1
2
SPH
J Hook, double
3
KLH
Claw hook
pressure ratchet
Fig. Product No.
1
50H-2-DL-SPH2
50H-2-DL-KLH3
50H-2-DL-KHT4
50H-2-DL-KHG5
50H-2-DL-KHF6
50H-2-DL-FLH7
50H-2-DL-SPS8
50H-2-DL-SPE9
50H-2-DL-TRI-
4
KHT
Forged hook
with triangle
5
KHG
Twisted snap
hook
6
KHF
Flat snap hook
7
FLH
Flat hook
8
SPS
J Hook, double
with keeper
9
SPE
J Hook, single
TRI
Triangle
tension ratchet
Product No.
50H-2-ZL-SPH50H-2-ZL-KLH50H-2-ZL-KHT50H-2-ZL-KHG50H-2-ZL-KHF50H-2-ZL-FLH50H-2-ZL-SPS50H-2-ZL-SPE50H-2-ZL-TRI-
bandwidth
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
E
E
E
E
E
E
E
E
E
2m
22,50
22,50
30,60
29,20
29,20
30,60
26,40
26,40
23,20
4m
25,40
25,40
33,50
32,10
32,10
33,50
29,30
29,30
26,10
6m
28,30
28,30
36,40
35,00
35,00
36,40
32,20
32,20
29,00
8m
31,20
31,20
39,30
37,90
37,90
39,30
35,10
35,10
31,90
10 m
34,10
34,10
42,20
40,80
40,80
42,20
38,00
38,00
34,80
±1 m
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
7
50
Lashing strap with pressure ratchet
mm
LC
bandwidth
50 mm
e
2m
11,60
4m
14,50
6m
17,30
8m
20,20
10 m
23,10
IN G ER
by S A FE
MANY
TE X
5.000 daN
STF
Product No.
50H-1-DR-
MADE
300 daN
±1 m
1,50
2,5 t lashing strap with pressure ratchet, two-piece
1
2
SPH
J Hook, double
3
KLH
Claw hook
Fig. Product No.
1
50H-2-DR-SPH2
50H-2-DR-KLH3
50H-2-DR-KHT4
50H-2-DR-KHG5
50H-2-DR-KHF6
50H-2-DR-FLH7
50H-2-DR-SPS8
50H-2-DR-SPE9
50H-2-DR-TRI-
4
KHT
Forged hook
with triangle
bandwidth
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
Luwithane®
edge-protection plate
8
KHG
Twisted snap
hook
E
E
E
E
E
E
E
E
E
2m
14,70
14,70
22,70
21,30
21,30
22,70
18,50
18,50
15,40
6
7
KHF
Flat snap hook
4m
17,60
17,60
25,60
24,20
24,20
25,60
21,40
21,40
18,30
FLH
Flat hook
6m
20,50
20,50
28,50
27,10
27,10
28,50
24,30
24,30
21,20
8m
23,40
23,40
31,40
30,00
30,00
31,40
27,20
27,20
24,10
8
SPS
J Hook, double
with keeper
10 m
26,30
26,30
34,40
32,90
32,90
34,40
30,10
30,10
27,00
SPE
±1 m
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
E/pc
6,30
Prevents damage when lashing
sharp-edge loads
Product No.
KSW 050
material
PE
9
J Hook, single
Edge protection bracket
Polyurethane elastomer ca. 5 mm, transparent with extremely high cutting resistance
Product No. outer size
LKP-055
300 x 100 mm
5
E/pc
2,50
LC
TRI
Triangle
2.500 daN
STF
300 daN
50
mm
LC
bandwidth
50 mm
2m
10,90
e
4m
13,10
6m
15,40
8m
17,60
10 m
19,90
IN G ER
by S A FE
MANY
TE X
4.000 daN
STF
Product No.
50E-1-DR-
MADE
300 daN
±1 m
1,20
1
2
3
SPH
J Hook, double
4
KLH
Claw hook
Fig. Product No.
1
50E-2-DR-SPH2
50E-2-DR-KLH3
50E-2-DR-KHT4
50E-2-DR-KHG5
50E-2-DR-KHF6
50E-2-DR-FLH7
50E-2-DR-SPS8
50E-2-DR-SPE9
50E-2-DR-TRI-
KHT
KHG
Forged hook with Twisted snap
triangle
hook
bandwidth
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
Luwithane®
E
E
E
E
E
E
E
E
E
outer size
300 x 100 mm
2m
13,90
13,90
21,90
20,50
20,50
21,90
17,70
17,70
14,60
6
7
KHF
Flat snap hook
4m
16,10
16,10
24,20
22,80
22,80
24,20
20,00
20,00
16,80
6m
18,40
18,40
26,40
25,00
25,00
26,40
22,20
22,20
19,10
FLH
Flat hook
8m
20,70
20,70
28,70
27,30
27,30
28,70
24,50
24,50
21,40
8
SPS
J Hook, double
with keeper
10 m
22,90
22,90
31,00
29,60
29,60
31,00
26,80
26,80
23,60
9
SPE
J Hook, single
±1 m
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
LC
TRI
Triangle
2.000 daN
STF
300 daN
Polyurethane elastomer ca. 5 mm, transparentwith extremely high cutting resistance
Product No.
LKP-055
5
E/pc
6,30
sharp-edge loads
Product No.
KSW 050
material E/pc
PE
2,50
9
MADE
Loose end and fixed end as individual components
75
Fig.
1
2
3
4
5
10 t
mm
Product No.
75H-LE-TKK75H-LE-KHT75H-LE-KLH75H-LE-SPH75H-LE-TRS-
1
Loose end
2
±1 m
5,50
5,50
5,50
5,50
5,50
3
MANY
TE X
Fixed end with heavy-load ratchet
7,30 m
100,20
65,10
52,30
52,30
63,30
E
E
E
E
E
IN G ER
by S A FE
Product No.
75H-FE-DR-TKK75H-FE-DR-KHT75H-FE-DR-KLH75H-FE-DR-SPH75H-FE-DR-TRS-
4
0,70 m
117,10
82,00
69,20
69,20
80,20
E
E
E
E
E
±1 m
5,50
5,50
5,50
5,50
5,50
LC
5.000 daN
Luwithane® edge-protection plate
5
Polyurethane elastomer ca. 5 mm, transparent
with extremely high cutting resistance
TKK
50
Fig.
1
2
3
4
5
6
7
8
9
KHT
5t
mm
Product No.
50H-LE-SPH50H-LE-KLH50H-LE-KHT50H-LE-KHG50H-LE-KHF50H-LE-FLH50H-LE-SPS50H-LE-SPE50H-LE-TRI-
1
2
KLH
SPH
7,50 m
13,50
13,50
17,50
16,80
16,80
17,50
15,40
15,40
13,80
3
TRS
outer size
400 x 110 mm
Fixed end with
long-handle pressure ratchet
Loose end
E
E
E
E
E
E
E
E
E
Product No.
LKP-080
±1 m
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
Product No.
50H-FE-DL-SPH50H-FE-DL-KLH50H-FE-DL-KHT50H-FE-DL-KHG50H-FE-DL-KHF50H-FE-DL-FLH50H-FE-DL-SPS50H-FE-DL-SPE50H-FE-DL-TRI-
4
5
E
E
E
E
E
E
E
E
E
0,50 m
18,10
18,10
22,20
21,50
21,50
22,20
20,10
20,10
18,50
6
Fixed end with
long-handle tension ratchet
±1 m
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
7
E/pc
11,20
Product No.
50H-FE-ZL-SPH50H-FE-ZL-KLH50H-FE-ZL-KHT50H-FE-ZL-KHG50H-FE-ZL-KHF50H-FE-ZL-FLH50H-FE-ZL-SPS50H-FE-ZL-SPE50H-FE-ZL-TRI8
0,50 m
18,10
18,10
22,20
21,50
21,50
22,20
20,10
20,10
18,50
E
E
E
E
E
E
E
E
E
9
LC
2.500 daN
STF
SPH
KLH
KHT
Luwithane®
10
outer size
300 x 100 mm
KHF
FLH
SPS
SPE
TRI
Polyurethane elastomer ca. 5 mm, transparent with extremely high cutting
resistance
Product No.
LKP-055
KHG
sharp-edge loads
Product No. material
KSW 050
PE
E/pc
2,50
E/pc
6,30
450 daN
±1 m
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
MADE
Loose end and fixed end as individual components
50
Fig.
1
2
3
4
5
6
7
8
9
5t
mm
Loose end
Product No.
50H-LE-SPH50H-LE-KLH50H-LE-KHT50H-LE-KHG50H-LE-KHF50H-LE-FLH50H-LE-SPS50H-LE-SPE50H-LE-TRI-
1
2
E
E
E
E
E
E
E
E
E
±1 m
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
4
Product No.
50H-FE-DR-SPH50H-FE-DR-KLH50H-FE-DR-KHT50H-FE-DR-KHG50H-FE-DR-KHF50H-FE-DR-FLH50H-FE-DR-SPS50H-FE-DR-SPE50H-FE-DR-TRI5
6
7
E
E
E
E
E
E
E
E
E
0,50 m
11,00
11,00
15,00
14,30
14,30
15,00
12,90
12,90
11,30
8
±1 m
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
1,50
9
LC
2.500 daN
STF
SPH
50
Fig.
1
2
3
4
5
6
7
8
9
KLH
4t
mm
KHT
1
2
KHG
KHF
FLH
Loose end
Product No.
50E-LE-SPH50E-LE-KLH50E-LE-KHT50E-LE-KHG50E-LE-KHF50E-LE-FLH50E-LE-SPS50E-LE-SPE50E-LE-TRI-
E
E
E
E
E
E
E
E
E
3
SPS
SPE
KLH
Fixed end with pressure ratchet
7,50 m
11,20
11,20
15,20
14,50
14,50
15,20
13,10
13,10
11,50
±1 m
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
4
KHT
300 daN
TRI
Product No.
50E-FE-DR-SPH50E-FE-DR-KLH50E-FE-DR-KHT50E-FE-DR-KHG50E-FE-DR-KHF50E-FE-DR-FLH50E-FE-DR-SPS50E-FE-DR-SPE50E-FE-DR-TRI5
6
7
E
E
E
E
E
E
E
E
E
0,50 m
10,70
10,70
14,70
14,00
14,00
14,70
12,60
12,60
11,00
8
±1 m
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
1,20
9
LC
2.000 daN
STF
SPH
MANY
TE X
Fixed end with pressure ratchet
7,50 m
13,50
13,50
17,50
16,80
16,80
17,50
15,40
15,40
13,80
3
IN G ER
by S A FE
KHG
KHF
FLH
SPS
SPE
300 daN
TRI
11
45
Lashing strap for internal lashing
mm
lashing strap with pressure ratchet, one-piece
LC
bandwidth
45 mm
e
2m
10,30
4m
12,40
6m
14,50
8m
16,60
10 m
18,60
LC
with overcenter buckle
1.000 daN
with cam buckle
STF
Product No.
45I-1-OB45I-1-KL-
bandwidth
45 mm
45 mm
e
e
200 daN
±1 m
1,10
lashing strap, one-piece
2m
13,40
8,90
4m
15,50
11,00
6m
17,60
13,10
8m
19,70
15,20
10 m
21,80
17,30
30 daN
±1 m
1,10
1,10
lashing strap with pressure ratchet, two-piece
1
2
SLE
Rail anchor for
longitudinal hole,
1-piece
Fig.
1
2
3
4
5
12
Product No.
45I-2-DR-SLE45I-2-DR-SLD45I-2-DR-SRZ45I-2-DR-FLH45I-2-DR-AGR-
3
SLD
SRZ
Rail anchor for
longitudinal hole,
3-piece
bandwidth
45 mm
45 mm
45 mm
45 mm
45 mm
4
2-piece rail anchor
for longitudinal hole
E
E
E
E
E
2m
17,70
16,80
15,90
16,80
25,10
4m
19,80
18,90
18,00
18,90
27,20
5
FLH
AGR
Flat hook for
rod rail
6m
21,90
21,00
20,10
21,00
29,30
8m
24,00
23,10
22,20
23,10
31,30
Lacing hook for
forming loops
10 m
26,10
25,20
24,30
25,20
33,40
±1 m
1,10
1,10
1,10
1,10
1,10
LC
1.000 daN
STF
IN G ER
by S A FE
2.000 daN
STF
Product No.
45I-1-DR-
MADE
200 daN
MANY
TE X
Accessories for internal lashing
Anchor rails, -systems
Anchor rails are screwed along the sideboard of vehicles to provide a variable and safe
lashing point (DIN 75 410-1). Accessories with a length exceeding 2m are supplied ex-works.
Anchor rail longitudinal hole
combination, galvanized steel
Adapter for longitudinal-hole
rail with triangle and rail anchor SLE,
with round hole Ø 25 mm, length 3.05 m
strap width 45 mm, fits ALK 305
Product No.
ALK 305
Product No.
VE45-A-SLE-TRI
e/pc
70,40
e/pc
12,80
Clamping beam shoe
110 x 49 x 86 mm, fits ALK 305
Product No.
SBS-ALK
e/pc
12,50
Rod rail, aluminium with
PVC profile
Airline rail, aluminium,
semi-circular profile
Airline rail, aluminium,
square profile
mounted horizontally, length 6.0 m
20 mm hole, length 3.0 m
20 mm hole, length 3.0 m
Product No.
ASP 600
Product No.
ALS-R-300
e/pc
162,60
e/pc
80,90
Product No.
ALS-V-300
e/pc
89,10
Aluminium clamping beam
Ratchet adjustment, aluminium cast with clamping handle. Movable rubber feet on both sides. Simple and safe to use with low weight.
Adjustable from 2350 – 2750 mm. Robust with outer diameter of 42 mm.
Product No.
KA2-GF-2350-2750
e/pc
72,60
Intermediate wall lock
Made of steel/aluminium, adjustable from 2400 – 2700 mm with plastic-covered clamp handle
Clamping surface 21 – 36 mm. Load capacity 400 daN.
Product No.
ZWV-2400-2700
e/pc
118,80
13
35
mm
LC
bandwidth
35 mm
e
2m
13,70
4m
17,10
6m
20,50
8m
23,80
10 m
27,20
IN G ER
by S A FE
MANY
TE X
3.000 daN
STF
Product No.
35S-1-DR-
MADE
250 daN
±1 m
1,70
1,5 t lashing strap with pressure ratchet, two-piece
1
2
SPH
J Hook, double
Fig.
1
2
3
4
5
6
7
3
KLH
Claw hook
Product No.
35S-2-DR-SPH35S-2-DR-KLH35S-2-DR-KHF35S-2-DR-SPE35S-2-DR-KHG35S-2-DR-TRI35S-2-DR-AGR-
4
5
KHF
Flat snap hook
bandwidth
35 mm
35 mm
35 mm
35 mm
35 mm
35 mm
35 mm
E
E
E
E
E
E
E
SPE
J Hook, single
2m
18,80
18,80
23,30
24,20
23,30
17,90
24,20
6
KHG
Twisted snap
hook
4m
22,10
22,10
26,60
27,50
26,60
21,20
27,50
6m
25,50
25,50
30,00
30,90
30,00
24,60
30,90
Suitcase strap
14
bandwidth
38 mm
38 mm
TRI
Triangle
8m
28,90
28,90
33,40
34,30
33,40
28,00
34,30
AGR
Lacing hook for
forming loops
10 m
32,20
32,20
36,70
37,60
36,70
31,30
37,60
±1 m
1,70
1,70
1,70
1,70
1,70
1,70
1,70
LC
1.500 daN
STF
250 daN
Luwithane® ratchet underlay
belt strap true coloured
in red with pin buckle
and sliding clasp
of plastic with address label
sewed in place
Product No.
KGE-038-0.90-1.80
KGE-038-0.90-5.00
7
for lashing strap 35 mm
length
Adjustable 90 – 180 cm
Adjustable 90 – 500 cm
e/pc
5,60
7,50
Product No.
LKP-040
outer size
250 x 85 mm
slot dimensions e/pc
35 x 10 mm
5,30
35
Lashing strap with pressure ratchet, clamp lock
mm
LC
bandwidth
35 mm
e
2m
9,30
4m
11,10
6m
13,00
8m
14,80
10 m
16,60
LC
e
2m
7,50
4m
9,30
6m
11,20
8m
13,00
10 m
14,80
200 daN
900 daN
STF
bandwidth
35 mm
MANY
TE X
±1 m
0,90
900 kg lashing strap with clamp lock, one-piece
Product No.
35A-1-KL-
IN G ER
by S A FE
2.000 daN
STF
Product No.
35A-1-DR-
MADE
30 daN
±1 m
0,90
1
2
SPH
J Hook, double
Fig.
1
2
3
4
5
6
7
3
KLH
Claw hook
Product No.
35A-2-DR-SPH35A-2-DR-KLH35A-2-DR-KHF35A-2-DR-SPE35A-2-DR-KHG35A-2-DR-TRI35A-2-DR-AGR-
4
5
KHF
Flat snap hook
bandwidth
35 mm
35 mm
35 mm
35 mm
35 mm
35 mm
35 mm
E
E
E
E
E
E
E
SPE
J Hook, single
2m
14,10
14,10
15,50
19,50
18,60
13,20
22,90
6
7
KHG
Twisted snap
hook
4m
16,00
16,00
17,30
21,40
20,50
15,10
24,70
6m
17,80
17,80
19,10
23,20
22,30
16,90
26,50
TRI
Triangle
8m
19,60
19,60
21,00
25,00
24,10
18,70
28,30
AGR
Lacing hook for
forming loops
10 m
21,40
21,40
22,80
26,80
25,90
20,50
30,10
±1 m
0,90
0,90
0,90
0,90
0,90
0,90
0,90
LC
1.000 daN
STF
200 daN
15
25
mm
1,5 t lashing strap with pressure ratchet, one-piece
LC
bandwidth
25 mm
e
2m
7,30
4m
9,10
6m
10,90
8m
12,70
10 m
14,50
150 daN
±1 m
0,90
750 kg lashing strap with pressure ratchet, two-piece
1
2
3
SPH
J Hook, double
Abb.
1
2
3
4
5
6
4
KHT
Forged hook
with triangle
Product No.
25S-2-DR-SPH25S-2-DR-KHT25S-2-DR-KHF25S-2-DR-TRI25S-2-DR-FHS25S-2-DR-BSA-
5
KHF
Flat snap hook
bandwidth
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm
E
E
E
E
E
E
TRI
Triangle
2m
11,00
14,20
13,30
10,50
11,10
13,30
16
Slot size
25 x 10 mm
6m
14,70
17,80
16,90
14,10
14,70
16,90
BSA
Floor rail anchor
8m
16,50
19,60
18,70
16,00
16,50
18,70
10 m
18,30
21,50
20,60
17,80
18,30
20,50
±1 m
0,90
0,90
0,90
0,90
0,90
0,90
SB Packaging
Lashing strap 25
and 35 mm can be
delivered in blister
pack if requested
for lashing strap 25 mm
outer size
250 x 80 mm
FHS
4m
12,90
16,00
15,10
12,30
12,90
15,10
Luwithane® edge-protection plate
Product No.
LKP-030
6
Flat hook with
keeper
e/pc
4,90
LC
750 daN
STF
IN G ER
by S A FE
1.500 daN
STF
Product No.
25S-1-DR-
MADE
150 daN
MANY
TE X
25
Lashing strap with pressure ratchet, clamp lock
mm
800 kg lashing strap with pressure ratchet, one-piece
LC
bandwidth
25 mm
e
2m
4,10
4m
5,00
6m
5,90
8m
6,80
10 m
7,70
LC
e
e
2m
2,10
4,60
4m
4,00
6,00
6m
4,90
7,30
8m
5,80
8,70
10 m
6,70
10,10
80 daN
450 daN
STF
bandwidth
25 mm
25 mm
MANY
TE X
±1 m
0,50
Product No.
25B-1-KL4525B-1-KL75-
IN G ER
by S A FE
800 daN
STF
Product No.
25A-1-DR-
MADE
30 daN
±1 m
0,50
0,70
25B-1-KL75 with galvanized steel clamp lock, weld-able
400 kg lashing strap with pressure ratchet, two-piece
1
2
SPH
J Hook, double
Fig.
1
2
3
4
5
6
7
8
3
KLH
Claw hook
Product No.
25A-2-DR-SPH25A-2-DR-KLH25A-2-DR-SHG25A-2-DR-KHF25A-2-DR-FHS25A-2-DR-TRI25A-2-DR-AGR25A-2-DR-TRS-
4
5
SHG
S-hook closed,
PVC coated
bandwidth
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm
E
E
E
E
E
E
E
E
KHF
Snap hook, flat
2m
7,00
7,10
7,60
9,80
8,00
7,00
15,30
9,40
6
7
FHS
Flat hook with
catch
4m
8,00
8,00
8,50
10,70
8,90
8,00
16,20
10,30
6m
8,90
9,00
9,40
11,70
9,90
8,90
17,10
11,20
TRI
Triangle
8m
9,80
9,90
10,30
12,60
10,80
9,80
18,10
12,10
8
AGR
Lacing hook for
forming loops
10 m
10,70
10,80
11,20
13,50
11,70
10,70
19,00
13,00
TRS
Screw-fit triangle
±1 m
0,50
0,50
0,50
0,50
0,50
0,50
0,50
0,50
LC
400 daN
STF
80 daN
17
25
Lashing strap clamp lock
mm
LC
bandwidth
25 mm
e
2m
2,80
4m
3,70
6m
4,70
8m
5,60
10 m
6,50
IN G ER
by S A FE
MANY
TE X
250 daN
STF
Product No.
25B-1-KL-
MADE
30 daN
±1 m
0,50
125 kg lashing strap with clamp lock, two-piece
1
2
3
SHG
S-hook closed,
PVC coated
Fig.
1
2
3
4
5
6
4
KLH
FHS
J Hook, double
Product No.
25B-2-KL-SHG25B-2-KL-SPH25B-2-KL-FHS25B-2-KL-KLH25B-2-KL-TRI25B-2-KL-TRS-
5
Flat hook with
catch
bandwidth
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm
18
Lashing strap KLH
Claw hook
E
E
E
E
E
E
2m
6,40
5,90
6,90
6,00
5,90
8,20
6
TRI
Triangle
4m
7,30
6,80
7,80
6,90
6,80
9,10
TRS
Screw-fit
triangle
6m
8,20
7,70
8,70
7,80
7,70
10,00
8m
9,10
8,60
9,60
8,70
8,60
10,90
10 m
10,10
9,50
10,50
9,60
9,50
11,90
±1 m
0,50
0,50
0,50
0,50
0,50
0,50
clamp lock
mm
LC
125 daN
STF
nach EN 12195-2
LC
90 daN
STF
Product No.
18B-1-KL-
18
bandwidth
18 mm
e
2m
2,90
4m
3,80
6m
4,70
30 daN
8m
5,70
10 m
6,60
±1 m
0,50
30 daN
Strap for bulk stock
Safetex polyester (PES) strap is fixated, stretched and impregnated with polyurethane with an average extension of < 5% and meet EN 12195-2 standards.
Blackline straps are produced from true black died fabric.
Product No.
75H-15000
50H-07500
50E-06000
50 I-04500
48A-02500
45 I-03000
35S-04500
35A-03000
25S-02250
25A-01500
25B-01200
18B-00600
020PES-00550
023PES-00500
bandwidth
75 mm ± 1,0
50 mm ± 1,0
50 mm ± 1,0
50 mm ± 1,0
50 mm ± 1,0
45 mm ± 1,0
35 mm ± 0,7
35 mm ± 0,7
25 mm ± 0,5
25 mm ± 0,5
25 mm ± 0,5
18 mm ± 0,5
25 mm ± 0,5
25 mm ± 0,5
thickness
4,0 mm
3,0 mm
3,0 mm
3,0 mm
3,0 mm
2,0 mm
2,2 mm
2,2 mm
2,2 mm
1,5 mm
1,0 mm
1,5 mm
1,5 mm
1,0 mm
coloring
breaking strength
yellow + olive
15.000 daN
blue + orange
7.500 daN
blue + orange
6.000 daN
blue + green
4.500 daN
black
2.500 daN
orange
3.000 daN
orange + black
4.500 daN
blue + orange
3.000 daN
red + blue
2.250 daN
blue + orange
1.500 daN
blue + orange
1.200 daN
black + white
600 daN
black
550 daN
white
530 daN
Individual strap printing
All Safetex straps can be individually printed according to your needs.
Printing per letter with a maximum length of 25 letters or per print plate.
Print plates are created using your print-ready masters or from digitalized data.
The imprint then follows in black starting at 500 meters of strap.
Additional charges for printing: 5% plus label costs.
Print plates for imprint
Product No.
KLI-NAME-75
KLI-NAME-50
KLI-NAME-35
KLI-NAME-25
width
75 mm
50 mm
35 mm
25 mm
Aufdruck per Buchstaben
Printing per print plate
19
Tensioning elements
The peformance of a tensioner is called the pretensioning force and it depends on the type of
ratchet that is used. SAFETEX´s long-lever ratchets
with a stepping function are suitable for 50 mm
wide lashing straps. These ratchets can apply a
higher pre-tensioning force. Fewer lashing devices
are required for securing the cargo because of that.
A long-lever ratchet has a lifting length of 300 mm.
Its performance is roughly equivalent to two shortlever ratchets in practice.
Tensioning elements for
75 mm strap width

Pressure ratchet for
lashing-down heavy loads
Product No.
SE75-DR-10000
50 mm strap width

2
Pressure ratchet
3
Long-handle
pressure ratchet
Long-handle
tension ratchet
4
5
6
7
8
9
10
11
Short pressure
ratchet
Pressure ratchet
for inside lashing
Overcenter buckle
Painted black
Fig.
1
2
3
4
5
6
Product No.
SE50-DR-05000
SE50-DL-05000
SE50-ZL-05000
SE50-DK-05000
SE50-DR-02000
SE50-OB-02000

Pressure ratchet
Fig.
1
2
3
Product No.
SE35-DR-03000
SE35-DR-02000
SE35-KL -00900
Overcenter buckle
Cam buckle
LC / daN
2.500
2.500
2.500
2.500
1.000
1.000
20
Fig.
1
Overcenter-Bügelschloss
NIRO stainless steel
Loop buckle
Fig.
7
8
9
10
11
Product No.
SE50-OB-NI-01300
SE50-OB-SW-01000
SE50-KL-01000
SE50-SS-02000
SE50-GS-00800
Slide buckle
LC / daN
650
500
500
1.000
400
35 mm strap width
2
3
Pressure ratchet
LC / daN
1.500
1.000
450
Cam buckle
Fig.
4
5
Product No.
SE35-GS-00600
SE35-SS-02000
4
Slide buckle
LC / daN
300
1.000
5
Loop buckle
LC / daN
5.000
Tensioning elements
25 mm strap width

2




Pressure ratchet
Cam buckle
Fig.
1
2
3
4
Product No.
SE25-DR-01500
SE25-DR-00800
SE25-DR-00800-B
SE25-KL-00750
Pressure ratchet
Tensioning clip
LC / daN
750
400
400
375

Cam buckle
weldable
Blackline
pressure ratchet

Cam buckle
Loop buckle
Fig.
5
6
7
8
Product No.
SE25-KL-00450
SE25-KL-00250
SE25-SB-00200
SE25-SS-02000
LC / daN
225
125
100
1.000
18 mm strap width

Cam buckle
Fig.
1
Product No.
SE18-KL-00180
LC / daN
90
Presure ratchet in NIRO stainless steel

for 50 mm strap width
Fig.
1
2
Product No.
SE50-DR-NI-03000
SE35-DR-NI-01800
2
3
LC / daN
1.500
900
Fig.
3
4
Product No.
SE25-DR-NI-01500
SE25-DR-NI-00800
4
LC / daN
750
400
21
Connecting elements
Connecting elements for
1
2
5
6
J Hook, double
Screw-fit triangle
Screw-fit triangle
Claw hook
Fig.
1
2
3
4
Product No.
VE 75-TRS-20000
VE 75-TRS-12000
VE 75-TKK-20000
VE 75-TKK-12000
3
combination
4
combination
7
Forged hook with triangle
LC / daN
10,0 t
6,0 t
10,0 t
6,0 t
Connection elements for
Fig.
5
6
7
Product No.
VE 75-KLH-10000
VE 75-SPH-10000
VE 75-KHT-10000
LC / daN
5,0 t
5,0 t
5,0 t
50 mm strap width

2
J Hook, double
3
Forged hook
with triangle
4
J Hook, single
5
J Hook, single with welded tube
6
7
8
9
10
Claw hook
J Hook, double with keeper
11
Triangle
Fig.
1
2
3
4
5
6
7
8
22
75 mm strap width
Forged hook
12
13
Oval ring link
Product No.
VE 50-KLH-05000
VE 50-SPH-05000
VE 50-KHT-05000
VE 50-SPE-05000
VE 50-SEA-05000
VE 50-SPS-05000
VE 50-FLH-05000
VE 50-KFH-05000
Snap hook, flat
14
Lacing hook
for forming loops
LC / daN
2,5 t
2,5 t
2,5 t
2,5 t
2,5 t
2,5 t
2,5 t
2,5 t
Flat hook for rod rail
Fig.
9
10
11
12
13
14
15
16
Product No.
VE 50-KHF-02000
VE 50-KHG-05000
VE 50- TRI -05000
VE 50-ORG-03000
VE 50-AGR-02000
VE 50-FLH-02700
VE 50-KLG-01800
VE 50-CLH-03000
Snap hook, flat
15 Claw hook, closed
Twisted snap hook
16
Car-lashing hook
LC / daN
1,0 t
2,5 t
2,5 t
1,5 t
1,0 t
1,35 t
0,9 t
1,5 t
Connecting elements
50 mm strap width
17
18
19
20
22
23
24
25
Screw-fit triangle
Pivoting Ackermann-Fruehauf
adapter hook
Claw hook special version
Fig.
17
18
19
20
21
50 mm lash hook
Product No.
VE 50-TRS-05000
VE 50-AFD-05000
VE 50-AFS-05000
VE 50-ASH-05000
VE 50-DEL-05000
Claw hook
7
Lacing hook
for forming loops
Fig.
1
2
3
4
5
6
50 mm delta ring galvanized
LC / daN
5,0 t
2,0 t
1,5 t
1,25 t
1-piece rail anchor for
longitudinal hole
Fig.
4
5
4
longitudinal hole
Product No.
VE 45-SLD-01000
VE 45-SRZ-00600
5
round hole
LC / daN
0,5 t
0,3 t
35 mm strap width
2
J Hook,
double
8
Screw-fit triangle
Product No.
VE 35-KLH-03000
VE 35 SPH-03000
VE 35-SPE-03000
VE 35-SEA-03000
VE 35-KHG-03000
VE 35-TRI-03000
21
Floor rail anchor
Product No.
VE 50-KLH-10000
VE 50-ZUH-04000
VE 50-FLH-03000B8.5
VE 50-BSA-02200
3
LC / daN
1,0 t
0,5 t
0,5 t
Adapter for J-hook VE50SPH-05000
45 mm strap width
Omega rail anchor
Product No.
VE 45-ASV-02000
VE 45-OSA-01000
VE 45-SLE-01000
1
Fig.
22
23
24
25
2
Car safety lash anchor
Fig.
1
2
3
Flat hook with hole diameter of
8.5 mm
LC / daN
2,5 t
2,5 t
2,5 t
2,5 t
2,5 t
1
Fixed Ackermann-Fruehauf
adapter hook
LC / daN
1,5 t
1,5 t
1,5 t
1,5 t
1,5 t
1,5 t
3
4
5
6
J Hook, single
J Hook, single with
welded tube
Twisted snap hook
Triangle
9
10
11
12
Forged hook with trianglel
Forged hook, flat
Fig.
7
8
9
10
11
12
Product No.
VE 35-AGR-01000
VE 35-TRS-02750
VE 35/25-KHF-02500
VE 35-KHT-02000
VE 35-ASV-02000
VE 35-CLH-03000
Car-Lashing-Haken
LC / daN
0,5 t
1,35 t
1,25 t
1,0 t
1,0 t
1,5 t
23
Connecting elements
25 mm strap width
1
2
3
4
5
6
7
8
9
12
J Hook, double
13
Wire hook,
closed
Fig.
1
2
3
4
5
6
7
8
9
Triangle
Lacing hook
for forming loops
Flat hook
with catch
14
Pallet hook
Product No.
VE 25-SPH-01500
VE 25-TRI-01500
VE 25-AGR-00500
VE 25-TRS-00500
VE 35/25-KHF-02500
VE 25-KHT-02500
VE 25-ASV-02000
VE 25-FHS-01500
VE 25-KLH-01000
Screw-fit triangle
Forged hook, flat
10 J Hook, double
11
Claw hook
15
16
17
LC / daN
0,75 t
0,75 t
0,25 t
0,25 t
1,25 t
1,0 t
1,0 t
0,75 t
0,5 t
Fig.
10
11
12
13
14
15
16
17
Connecting elements in NIRO stainless steel
Floor rail anchor
Product No.
VE 25-SPH-01000
VE 25-SHG-01000-PVC
VE 25-SHG-00500-PVC
VE 25-DHG-00250
VE 25-PAH-01500
VE 25-ASV-01000
VE 25-BSA-01500
VE 25-CLH-03000
S-hook closed,
PVC coated
Forged hook
with triangle
S-hook closed,
PVC coated
Car-Lashing-hook
LC / daN
0,5 t
0,5 t
0,25 t
0,12 t
0,75 t
0,5 t
0,75 t
1,5 t
Anchoring point for the floor-mounted rail anchor
Diameter 45 mm
J Hook, double
for weidth
50 mm
35 mm
25 mm
25 mm
24
Product No.
VE 50-SPH-NI-04500
VE 35-SPH-NI-03000
VE 25-SPH-NI-01500
VE 25-SPH-NI-00550
LC / daN
2,25 t
1,50 t
0,75 t
0,27 t
Product No.
VE-25-ZP-BSA
e/pc
Anti-slip equipment
Anti-slip mats
Using anti-slip mats increases the abrasion resistance between the load surface and the load
itself; or for instance with steel plates between the loaded goods. The material is made of natural
rubber and polyurethane and has a sliding friction coefficient value of 0.6 μ when used as an
underlay on dry or wet surfaces. Greasy or oily surfaces should be avoided in general.
An anti-slip mat greatly reduces the number of lashing straps needed to secure a load safely.
For heavy loads, a mat thickness of 8 mm and 10 mm is recommended.
Mats in all widths and lengths can be cut if customer requests it.
Prices are calculated to full m³
Master roll
Product No.
ARM 03-1250-20000
ARM 06-1250-10000
ARM 08-1250-8000
ARM 10-1250-6000
thickness
3 mm
6 mm
8 mm
10 mm
wxl
weight
1,25 x 20 m 78 kg
1,25 x 10 m 68 kg
1,25 x 8 m 80 kg
1,25 x 6 m 69 kg
m² / roll
25,0 m²
12,5 m²
10,0 m²
7,5 m²
E
E
E
E
roll
258,00
263,00
259,00
252,00
Anti-slip mat for cutting
Product No.
size
ARM-03
3 mm x 1 m²
ARM-06
6 mm x 1 m²
ARM-08
8 mm x 1 m²
ARM-10
10 mm x 1 m²
weight
3,12 kg
5,44 kg
8,00 kg
9,10 kg
E
E
E
E
m²
18,30
27,40
33,80
43,70
Anti-slip pads
as underlays for Euro pallets, drop-side mesh pallets, steel plates
Product No.
ARM-03-0100-0100
ARM-08-0100-0200
Bases for
euro pallets
mesh boxes and
steel plates
thickness
wxl
weight
piece
E
3 mm 10 x 10 cm 0,03 kg
0,60
8 mm 10 x 20 cm
0,14 kg E 1,70
Abrasion protection hose
PVC abrasion protection hose
Abrasion protection hose made of textile wire braid
With inner rubber. Rolls of up to 50 m.
Product No.
ARS-PVC-FLB-045
ARS-PVC-FLB-055
ARS-PVC-FLB-075
for lashing strap
25/35 mm
50 mm
75 mm
With excellent abrasion and cut protection properties thanks to the
extremely strong interwoven textile wire fabric. The premium product
among abrasion protection hoses.
e/meter
5,30
6,00
8,20
Product No.
ARS-TECH-038
ARS-TECH-060
ARS-TECH-105
for lashing strap
35 mm
50 mm
75 mm
e/ 50 cm
11,65
15,60
26,90
25
Lashing points
Lashing anchor tie downs (DIN 75 410-1) are screwed or welded to the vehicle to provide
fastening options. These positive anchors allow economic lashing methods to be used.
Recessed anchor with binder and ring
galvanized
Product No. LC / daN
ZBR 08
400
ZBR 16
800
binder and ring
galvanized (without screws)
e/pc
4,10
6,75
Product No. LC / daN
ZBR 08-BR
400
ZBR 16-Bügel
800
ZBR 16-Ring
800
Recessed anchor with ring
galvanized (without screws)
Product No.
ZVR 22
e/pc
2,40
1,70
0,90
LC / daN
1.100
e/pc
6,75
Lashing points for welding
4 times the safety against break in all loading directions
Product No.
ZOS 06-8
ZOS 08-8
ZOS 10-8
ZOS 13-8
ZOS 16-8
ZOS 22-8
WLL
size
1,12 t
13 x 40 x 35 mm
2,00 t
13 x 41 x 36 mm
3,15 t
18 x 53 x 50 mm
5,30 t
22 x 63 x 60 mm
8,00 t
26 x 68 x 70 mm
15,00 t 30 x 120 x 100 mm
weight
0,35 kg
0,40 kg
0,70 kg
1,60 kg
2,40 kg
5,80 kg
LC / daN
2.250
4.000
6.300
10.600
16.000
30.000
e/pc
17,50
18,40
20,20
33,40
50,30
100,00
Lashing winches
Lashing winches are screwed to the vehicle to prevent theft. System-50E is used as the strap. ZWS 40 can also be fitted with
wire cable up to 9 mm ø.

Lashing winch ZWS 40
For use on conveyors or wire rope operations,
recoilless with robust worm-gear operation according to UVV VBG 8 standards.
Fig.
1
1
2
o. Abb.
3
4
26
Product No.
ZWS 40
ZWS 40-K
ZWS40-2012
ZWS40-K-V
ZWE 40 (Export)
ZWE 40-K
2
Lashing winch ZWS40-2012
For use on conveyors, recoilless with robust wormgear operation according to UVV VBG 8 standards.
description
Takes up to 10 m strap,
removable hand crank
is the strengthened hand
crank ratchet for ZWE 40
weight
10,5 kg
LC / daN
2.000
Fv/ daN
500
10,0 kg
2.000
500
3
Lashing winch ZW 40
(Export)
For use on conveyors,
simple version,
not recoilless.
e/pc
350,10
44,40
335,50
46,00
36,10
144,00
4
ZWE 40-K Ratchet
Special Equipment
Drum hanger
3-point drum hanger for drum diameters up to 700 mm, with Luwithane® ratchet underlay
Product No.
FGH3-50E-02.50
barrel Ø up to
700 mm
bandwidth
50 mm
length
2,50 m
load capacity
500 kg
e/pc
138,50
Gas bottle transporter
Transport set with loops at both sides for carrying by hand, and Luwithane® ratchet underlay
Product No.
TFG-50I-01.50
bandwidth
50 mm
length
1,50 m
load capacity
100 kg
e/pc
55,20
Furniture carrying strap
Infinitely adjustable using strap buckle with knurled roller
Product No.
MTG 300-03.00
MTG 300-04.00
MTG 300-05.00
length
3m
4m
5m
load strap width
50 mm
50 mm
50 mm
shoulder strap width
75 mm
75 mm
75 mm
load capacity
300 kg
300 kg
300 kg
e/pc
46,00
48,00
50,00
Furniture carrying strap with adjusting holes and wrought pin buckle, furniture
carrying hook with felt lining
Product No.
MTG 302-03.00
length
3m
bandwidth
85 mm
waistbelt thickness
3 mm
e/pc
62,00
Lashing for Awnings

Overcenter buckle
2
Fig.
1
2
3
Overcenter buckle
painted black
Product No.
SE 50-OB-NI-01000
SE50-OB-SW-01000
Loose end
Belt 48 mm, Black, fast dyed,
Closed with claw hook (KLG)
Length 0.80 m
Fig.
3
4
5
e/pc
9,20
4,80
Product No.
PVZ-LE-KLG-0.80
PVZ-2-OB-NI-KLG-0.80
PVZ-2-OB-SW-KLG-0.80
4 / 5 Lashing strap, complete:
Loose end threaded through overcenter
buckle and finished with a stop seam
Length 0.80 m
versions
loose end
painted black
e/pc
4,80
16,90
10,70
Lashing for Pallets
750 kg-capacity lashing strap with pressure ratchet
and pallet hooks, 2-part, lash width 25 mm according
to EN 12195-2 standards.
Product No.
25S-2-DR-PAH-
length
3m
e/pc
15,50
e/± 1 m
0,90
27
MADE
Car-Lashing
IN G ER
by S A FE
MANY
TE X
Safe vehicle transport by lashing-down all wheels. Equipment with wheel-protection belt prevents damage to
the wheel carcass. Short and direct connection between vehicle and whatever is transporting it. Variable, can
be used for different wheel sizes. Technical applications to meet special requirements upon request. In our own
production, we process belt straps made of polyester (PES) according to VDI 2700 sheet 8.1/8.2 with an average
extension of ≤ 4%.
LC
1.500 daN
For 35 mm strap width
LC
2.000 daN
Car-Lashing System CL1
Lashing straps 2.5 m long, 35 mm or 50 mm wide. Pressure ratchet with integrated J-hook or car-lashing hook.
Belt strap with 1 J-hook sewn in place and 1 loose J-hook, including 75 cm long wheel-protection strap.
For 50 mm strap width
ARB
Wheel-protection belt, through which the lashing strap smoothly
glides
SPE
Belt strap with
1 J-hook sewn in
place, and 1 loose
J-hook
SEA
CLH
J-hook or
car-lashing hook
with a direct
connection to
pressure ratchet
35 mm bandwidth
Product No.
CL1-35-1SEA-2SPE-ARB-02.50
CL1-35-1CLH-2SPE-ARB-02.50
CL1-35-3CLH-ARB-02.50
50 mm bandwidth
hook
SEA/SPE
CLH/SPE
CLH
Product No.
CL1-50-1SEA-2SPE-ARB-02.50
CL1-50-1CLH-2SPE-ARB-02.50
CL1-50-3CLH-ARB-02.50
e/Stück
33,50
33,00
46,90
hook
SEA/SPE
CLH/SPE
CLH
Wheel-protection Belt
With nub structure that “grips” the wheel which fixes the protection
belt in place. The lashing strap can glide through it smoothly and the
wheel lashed down low. Wheel carcass is not damaged.
Product No.
ARB-035-00.75
ARB-050-00.75
28
for lashing strap
35 mm
50 mm
length
75 cm
75 cm
e/pc
7,40
9,10
e/Stück
40,40
38,80
51,40
MADE
Car-Lashing
System CL3
Pressure ratchet with
car-lashing hook
and loop with
integrated J-hook
simple.
Product No.
CL2-35-1CLH-1SPE-S-01.50
CL2-50-1CLH-1SPE-S-01.50
e/pc
27,00
31,60
Loose with triangle
sewn in place.
Solid end with
pressure ratchet
and J-hook
simple.
bandwidth
35 mm
50 mm
Product No.
CL3-35
CL3-50
System CL4
System CL5
Lashing strap with
ratchet and
car-lashing hook.
bandwidth
35 mm
50 mm
MANY
TE X
System CL2
bandwidth
35 mm
50 mm
IN G ER
by S A FE
Product No.
CL4-35
CL4-50
car-lashing hook
and belt loop
sewn in place.
bandwidth
35 mm
50 mm
Product No.
CL5-35
CL5-50
Tensioning Elements with Car-Lashing Hooks
Pressure ratchets with direct connection for strap widths 35 and 50 mm.

car-lashing hook CLH
Fig. Product No.
for lashing strap LC / daN e/pc
1 CL50-DR-CLH-03000
50 mm
1.500 20,10
1 CL35-DR-CLH-03000
35 mm
1.500 17,70
2
Pressure ratchet
with J-hook simple SEA
Fig. Product No.
for lashing strap LC / daN e/pc
2 CL50-DR-SEA-04000
50 mm
2.000 21,70
2 CL35-DR-SEA-03000
35 mm
1.500 18,20
29
Single-use lashing-down elements
Complete set
Comprising a dispenser, tensioner, clamps
and spare rollers.
Product No.
ST-EVS-13
ST-EVS-16
ST-EVS-19
ST-EVS-25
ST-EVS-35
bandwidth
mm
13
16
19
25
35
number of
clamps
1.000
1.000
500
250
250
e/set
749,10
769,20
728,90
1.543,90
1.885,80
Roller
Tensioner
A portable, very robust and stable dispenser
with a dispensing box for clamps.
Available in two sizes.
Tensioner for tensioning strip in SwissmadeQuality. Made from steel. With an integrated
cutter.
for bandProduct No. width mm
ST-A-09-19
9 – 19
ST-A-25-35
25 – 35
Original
ST-S-09-19
9 – 19
ST-S-25-35
25 – 35
e/pc
149,70
194,40
e/pc
242,70
658,00
Single-use tensioning strip
Clamps
Made from high-strength polyester yarn.
Packaging unit = 2 pieces.
Galvanized, suitable for different widths of band.
Product No.
ST-B-13-1100
ST-B-16-0850
ST-B-19-0600
ST-B-25-0500
ST-B-35-0150
30
band´s
length m
2 x 1.100
2 x 850
2 x 600
2 x 500
7 x 150
bandLC/
width length
m
daN
mm
13
1.100
610
16
850
790
19
600
880
25
500 1.350
35
150 2.000
e/pc
133,50
133,50
133,50
179,70
84,00
ST-K-13-1000
ST-K-16-1000
ST-K-19-0500
ST-K-25-0250
ST-K-35-0250
13
16
19
25
35
pc/
PU
1.000
1.000
500
250
250
e/Pk
89,70
109,80
69,50
132,10
245,40
swissmade
Single-use lashing-down elements
Tension ratchet
Loop buckle
Single-use buckle
For bands of 50 mm width.
Made from galvanized steel. Suitable for
joining belt bands of 50 mm width.
Arched clasp made from galvanized
steel. For joining belt bands of 50 mm
width.
Product No.
ST-R-50
e/pc
89,40
Product No.
SE 50-SS-05000
Breaking
strength
e/pc
5.000 daN
7,10
Breaking
strength
Product No.
SE 50-EWS-01600 1.800 daN
e/pc
2,50
Belt band
Edge-protection bracket
Made from polyester. Band´s width: 50 mm. Length: 100 m per roll
or endlessly in the carton. Also available with an overprint.
40 mm sq., black. Useable as an edgeslider. With a fixing pin.
Product No.
50I
48A
Breaking
strength
Color
e/100 m
4.500 daN
2.500 daN
Raw white yarn
Black yarn
150,00
160,00
Product No.
ST-KSW
pc/PU
2.000
e/carton
50,40
Application examples
31
Hoisting gear
products
Event
equipment
Lifting straps and
roundslings
Ropes and
equipment
Protective
equipment
Headquarters
SAFETEX®
Hebe- und Transporttechnik GmbH
Hafenbahnstraße 10A
D - 70329 Stuttgart
Phone +49 (0)7 11 / 32 20 39
Fax +49 (0)7 11 / 32 92 97
www.safetex.de · info@safetex.de
Luwithane®
protective equipment
Heavy duty lashing
Chain slings
Branch
SAFETEX®
Hebe- und Verzurrtechnik GmbH
Alte Mittelhäuser Straße 5
D - 99091 Erfurt
Phone +49 (0)3 61 / 5 54 66-60
Fax +49 (0)3 61 / 5 54 66-70
www.safetex.de · erfurt@safetex.de
Subject to changes and errors. No liability for errors or omissions
No reproduction without written approval. Registered trademark of
SAFETEX Hebe- und Transporttechnik GmbH Stuttgart . 04/2013
Lashings

Lashing strap - SAFETEX Hebe

Transcription

Similar documents

Luwithane® Pricelist 2012

COBA-Internetseite

Brief nach DIN 5008