Catalogue Supplement

Transcription

SUPPLEMENT
Catalogue Supplement
2-3
4
5-7
8-13
14-17
18-19
20
21-23
24
25-27
28-29
30-33
34-35
36-40
41
42
43
44-45
46-66
67
68-69
69-70
71
72-73
74-75
76-81
82-93
94
95-99
100-101
102
103-105
106-107
108-109
110-111
112
Aquafax Inflatable Tenders
Berkley Outboard Trolling Motors
Sevylor Kayaks & Accessories
Besto Lifejackets & Buoyancy Aids
Coleman Coolers, Headlamps & Torches
Kuuma Grills & Accessories
Camco Cleaning Implements
Wilks PVC Fendering & Decking
Riptide Cleaning Products
Polymarine Inflatable Boat & Rib Care
International Cleaning Products,
Professional Antifouling, Bilgex & Intertuf
ProLoc Sealants & Adhesives
Loctite Sealants & Adhesives
Quicksilver Oils & Lubricants,
Shakespeare Fuel Additives
PELA Oil Extractors
Fuel-Guard Decontaminator,
CAN-SB Jerry Cans & Anti-syphon Lock Valve
Guidi Alex Valves & Long Bronze Skin Fittings,
Swing Check Valve
Ultraflex Steering Systems
Dometic Hobs, Ovens, Sinks & Toilets, Waeco
Refrigeration, Inverters, Chargers & DCDC Converters
TREM Anchor Connectors, Glovebox,
Boarding Ladder, Lifebuoys & Navigation Lights
CAN-SB Lifebuoys, Hatches, Storage Boxes,
Transom Drain Sockets & Caps & Expanding Plugs
Ski Mirror, Propeller Bags, Fishing Rod Holders
Ritchie Compasses
Canopy Fasteners
Marinco/Nicro Ventilation & Marinco Spot Lights
Marinco/AFI Horns, Wiper Motors, Blades & Arms
Shakespeare Antennas
Weaver Snap Davits
Marinco/BEP Pro Installer Series Battery Switches
Busbars, Fuse Holders, Insulated Studs & Link Bars
Blue Sea Dual USB Chargers, Blade Fuse
Blocks & Busbars
Mastervolt Battery Monitors
Labcraft LED Lighting
Barigo Ship’s Instruments
Caframo Marine Fans, Whale Pumps
SPX Flow Johnson Pump
Morsø Swift Solid Fuel Stove & Accessories
Six Depots Nationwide
Aquafax Limited, 1 Dencora Way, Sundon Business Park, Luton, Beds LU3 3HP
Aquafax Ltd. (Hamble), 1-2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO31 4RF
Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU
Aquafax Ltd. (Middlewich), Unit 11, Valley Court, Sanderson Way, Middlewich, Cheshire CW10 0GF
Aquafax Ltd. (Wroxham), Unit 31, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR12 8DZ
Aquafax Ltd. (Glasgow), 103-105 Barrie Road, Hillington Park, Glasgow G52 4PX
Email: sales@aquafax.co.uk
Website: www.aquafax.co.uk
Tel:(01582) 568700
Tel:(023) 80457206
Tel:(01752) 669944
Tel:(01606) 841111
Tel:(01603) 781881
Tel: (0141) 8827511
Fax:(01582) 568720
Fax:(023) 80457208
Fax:(01752) 667764
Fax:(01606) 841188
Fax:(01603) 781981
Fax: (0141) 8835111
CATALOGUE SUPPLEMENT - J
Aquafax Slatted Floor
Inflatable Tenders
INFLATABLE BOATS
NEW RANGE
AQUAFAX INFLATABLE BOATS
Whether you want a tender to use with a larger boat, or a small boat for family days out, our range of six inflatable
boats offer a compact design making them very easy to handle and stow. They also incorporate some great features
making them safe, simple and fun to use.
Our inflatable boats range from 2.0 metres – 3.0 metres in length
with a choice of slatted floor boards or our air deck models with
inflatable keel for improved performance and handling.
SS towing eyes including
mooring line
Minimum 3
air chambers
Multi position
sliding seat
Double action
hand pump
included (6-62020)
Long life line for
extra safety
Rubbing strake
for extra
protection
Sliding deck
drain plug / self
drainer fitted
Packing bag
and repair kit
included
SLATTED FLOOR INFLATABLE BOATS
Models AFX-S 2.0m, 2.3m and 2.5m
Features:
• Two colour, grey with dark blue trim
• 3 air chambers
• Easy fit wooden floor slats
• Stainless steel towing eyes
• Extra stainless steel mooring eye inside boat
• Sliding deck drain plug / self drainer fitted
• Long life lines
• 41cm tubes on all models (37cm on 2.0m
slatted floor model)
• Adjustable aluminium seat with long runners
• Bolt through oars and oar stowage clips
• Made with quality multi layer PVC Decitex
• CE Certified in Europe
• 2 year limited warranty
Boat Includes:
• Quality double action hand pump
• Aluminium adjustable seat
• Easy stow oars and rowlock fixings
• Stainless steel towing eyes and mooring line
• Extra long life lines
• Packing bag, repair kit & instruction manual
Slatted Floor Specifications
Inflated Dimensions
No. of Air
Part No.
Model
Length Width Tube Dia. Chambers
6-34100 AFX-S2.0M 200cm 134cm
37cm
3
6-34101 AFX-S2.3M 230cm 134cm
41cm
3
6-34102 AFX-S2.5M 250cm 149cm
41cm
3
2
Max
Max
Max Max Max Engine
Bagged Size &
CE Design
Load Persons HP Kw
Weight
Weight (inc. oars)
Category
300kg
2
2.5 1.8
20kg
80 x 40 x 30cm (18kg)
D
325kg
2+1
4
2.9
25kg
80 x 40 x 30cm (20kg)
D
350kg
2+1
5
3.7
30kg
100 x 50 x 30cm (23kg)
D
Aquafax Air Deck
Inflatable Tenders
INFLATABLE BOATS
NEW RANGE
AIR DECK & KEEL INFLATABLE BOATS
Models AFX-A 2.3m, 2.5m and 3.0m
Features:
• Two colour, grey with dark blue trim
• 3 air chambers plus inflatable air deck and keel
• Strong drop stitched air deck floor
• Stainless steel towing eyes
• Extra stainless steel mooring eye inside boat
• Sliding drain plug / self drainer fitted
• Long life lines
• 41cm tubes on all models
• Adjustable aluminium seat with long runners
• Bolt through oars and oar stowage clips
• Made with quality multi layer PVC Decitex
• CE Certified in Europe
• 2 year limited warranty
Boat Includes:
• Quality double action hand pump
• Aluminium adjustable seat
• Easy stow oars and rowlock fixings
• Stainless steel towing eyes and mooring line
• Extra long life lines
• Packing bag, repair kit & instruction manual
Air Deck & Keel Specifications
Inflated Dimensions
No. of Air
Part No.
Model
Length Width Tube Dia. Chambers
6-34110 AFX-A2.3M 230cm 134cm
41cm
3+1+1
6-34111 AFX-A2.5M 250cm 149cm
41cm
3+1+1
6-34112 AFX-A3.0M 300cm 153cm
41cm
3+1+1
Max
Max
Max Max Max Engine
Bagged Size &
CE Design
Load Persons HP Kw
Weight
Weight (inc. oars)
Category
372kg
2+1
5
3.7
30kg
80 x 40 x 30cm (26kg)
D
400kg
2+1
6
4.4
30kg
100 x 50 x 30cm (28kg)
D
425kg
4
10
7.4
45kg
105 x 55 x 40cm (31kg)
C
AQUAFAX INFLATABLE BOAT SPARES
Part No.
16-34100-1
16-34100-2
16-34100-3
16-34100-4
16-34100-5
16-34100-6
16-34100-7
16-34100-8
16-34100-9
16-34100-10
16-34100-11
16-34100-12
16-34100-13
16-34100-14
16-34100-15
16-34100-16
16-34100-17
16-34100-18
16-34100-19
6-62066
Description
Transom pad small (inside)
Transom pad large (outside)
Rowlock assembly
Air valve assembly
Bow handle assembly with pad
Aluminium seat
Aluminium seat
Aluminium seat
Air deck 2.3m
Air deck 2.5m
Air deck 3.0m
Slat floor board
Seat hook
Under floor board for air deck
Sliding drain plug/self drainer assembly
Stainless D Ring
Paddle assembly (2.0-2.3m)
Paddle assembly (2.5-3.0m)
Tender packing bag
Pump Bayonet Valve Adaptor
Model
All models
All models
All models
All models
All models
All 2.0m & 2.3m models
All 2.5m models
All 3.0m models
AFX-A2.3M Air Deck models
All Slatted Floor models
All models
All Air Deck models
All models
All models
All 2.0 & 2.3m models
All 2.5 & 3.0m models
All models
All models
3
Berkley Trolling
Outboard Motors
SMALL BOAT ACCESSORIES
NEW RANGE
ELECTRIC OUTBOARD TROLLING MOTORS
• Quiet 12V DC operation
• Stainless steel shaft suitable for salt water use
• Fitted with 3 blade propeller
• Transom mount clamp bracket with 7 locking tilt positions
• Telescopic twist grip tiller control, 5 speed forward, 2 speed reverse
• Fitted with LED battery indicator
• Includes battery lead fitted with heavy duty insulated crocodile clamps
• 45lbs, 55lbs and 65lbs thrust motor options
Our new range of Berkley electric
outboard trolling motors are an ideal
product to compliment any small boat.
These quiet, efficient and clean electric
outboard motors are available in 45 ,55
and 65lbs thrust options and are
economical, light weight and easy to use.
Handle
Part No.
Model:
Max. Thrust:
Amp (Rated / Max.):
Output (Rated / Max.):
Voltage:
Decibel:
Battery Type (Not Included):
Transom Mount:
Tiller Control Handle:
Speed Control (Fwd & Rev):
Shaft Type:
Propeller:
Shaft Length:
Max. Boat Length:
Max. Boat Load:
Max. Speed (km/h / Knots):
6-20951
BTX45
20.1kg (45lbs)
32A / 36A
384W / 444W
12V DC
50db
6-20952
6-20953
BTX55
BTX65
24.6kg (55lbs)
31.8kg (65lbs)
36A / 41A
36A / 65A
432W / 528W
550W / 824W
12V DC
12V DC
50db
50db
100Ah Deep Cycle Battery
7 Locking Tilt Positions
Telescopic Extending Length 390mm (15.3'')
5 Speed Forward / 2 Speed Reverse
Stainless steel
3 Blade Propeller (black)
914mm (36'')
914mm (36'')
914mm (36'')
4.7m (15' 4)
5.5m (18')
6.0m (19' 7)
320kg (705lbs)
400kg (882lbs)
550kg (1213lbs)
7.5km/h / 4.0kn
10km/h / 5.4kn
11km/h / 5.9kn
6-20951
4
6-20952
Bracket
Propeller
6-20953
See Section 8 of our catalogue for batteries.
Sevylor Inflatable
Kayaks & Accessories
INFLATABLE BOATS
RIVIERA™ KAYAK
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
Ideal to enjoy adventures and leisure times on the water with friends and family.
With a light weight construction the Riviera is ideal for your very first kayak
adventures and comes complete with aluminium paddle
6-33000
312 x 92cm
2
0
180kg
3
8.4kg
TAHITI™ PLUS KAYAK
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
Weight:
• Broad shape offering excellent stability
• Boston, Mini Boston and Mini Double Lock valves for
easy inflation and deflation
• Sevytest™ to check pressure easily during inflation
• Highly effective drainage system
• Integrated spray deck at bow and stern
• Backpack System for easy storage and transportation
• 2 removable inflatable seats
• 2 ergonomic carry handles for easy transportation
Includes: paddle, Sevytest, repair kit and owners manual.
Optional: Direction skeg Part No. 6-33010 (page 7)
A timeless classic, the Tahiti Plus comes with an extra seat providing enough space for 2 adults and 1 child.
• Sevytest™ to check pressure easily during inflation
• Backpack System for easy storage and transportation
• 3 adjustable, removable, inflatable PVC seats
6-33001
361 x 90cm
2
1
200kg
3
11.7kg
Includes: Sevytest, repair kit and owners manual.
Optional: Direction skeg Part No. 6-33010 (page 7)
ADVENTURE™ & ADVENTURE™ KIT CANOES
Classic canoes that encourage fun, exploration and family adventure.
The high sided hull creates comfort and protection while on the water.
• Manometer: check pressure easily during inflation
• 2 fabric covered adjustable, removable, inflatable seats
• Removable fin for excellent manoeuvrability
Specifications
Part No. (Adventure™):
Part No. (Adventure™ Kit):
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
Weight:
6-33002
6-33003
314 x 88cm
2
0
165kg
3
11.5kg
Adventure Canoe Includes: carry bag, manometer, removable fin, repair kit and owners manual.
Adventure Canoe Kit includes all of the above plus foot pump and paddles.
Removable
Fin
ADVENTURE™
CANOE KIT
Manometer
(see page 7)
5
Sevylor Inflatable
INFLATABLE BOATS
ADVENTURE™ PLUS CANOE
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
Weight:
The Adventure Plus has the same high hull design as the
adventure but is longer to accommodate an additional central
childs seat and extra storage capacity.
6-33004
368 x 86cm
2
1
200kg
3
15.2kg
MADISON & MADISON KIT KAYAKS
• Integrated spray deck at bow and stern with bungee
cords for securing cargo
• 3 fabric covered adjustable, removable, inflatable seats
• Removable fin for excellent manoeuvrability
Removable
Fin
Includes: carry bag, manometer, removable fin,
repair kit and owners manual
Manometer
(see page 7)
Madison, the successor of our Colorado, combines an extraordinary mix of manoeuvrability,
stability and comfort. Thanks to its features like molded handles, the improved carry bag and
new comfortable seats, this kayak offers endless fun on the water.
• Wide shape offering excellent stability
• Easy Inflation Manometer: check pressure easily during inflation
• 2 fabric covered seats with a taller mesh back and base
• Removable seats - easily turn the kayak into a 1-person boat
• Removable fin and welded-on directional strake for excellent
manoeuvrability
• New molded handles on side including double function as
paddle holders
• Improved carry bag for easy transportation
• Front and rear spray decks
NEW
Specifications
Part No. (Madison):
Part No. (Madison Kit):
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
Weight:
6-33020
6-33021
329.5 x 94cm
2
0
200kg
3
15.6kg
Removable
Fin
Manometer
(see page 7)
MADISON KAYAK KIT
Includes: improved carry bag, easy inflation manometer,
removable fin, repair kit, owners manual.
Kit Includes: all of the above plus foot pump and paddles.
NEW
MADISON PREMIUM KAYAK
The Madison Premium boast all the features of the above Madison standard kayak but with
Easy Inflation System: simultaneous inflation of all 3 chambers.
NEW
Removable
Fin
Easy Inflation System
6
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
Weight:
Manometer
(see page 7)
6-33022
329.5 x 94cm
2
0
200kg
3
15.6kg
Sevylor Inflatable
INFLATABLE BOATS
HUDSON™ KAYAK
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
Weight:
Roomy and comfortable, the Hudson is perfect for a family day out, touring along sheltered coastline or on inland
waterways. This sporty kayak not only looks good but also offers great performance, stability and comfort.
6-33007
374 x 89cm
2
1
210kg
3
17.7kg
• Boston, Mini Boston and Mini Double Lock valves for easy
inflation and deflation
• 3 fabric covered, adjustable seats with high backrest and
inflatable sitting area
• Removable seats - easily turn the kayak into a 1-person version
• Removable fin and welded directional strakes for excellent
manoeuvrability
Removable
Fin
Manometer
(see below)
Includes: carry bag, manometer, removable fin, repair
kit and owners manual
QUICK CARRY BAG
DETACHABLE SKEG
• Fits all Sevylor® kayaks and canoes
• Comfortable, padded, adjustable
shoulder straps
• Mesh on both sides for optimal ventilation
• Adjustable hood with snap buckle
• Adjustable inner compression straps
• Large zipper to open bag completely and
easily place kayak/canoe inside
• 2 side pockets for paddles and pump
• Size: 90 x 44 x 33cm
Attachable skeg for Tahiti
and Riviera ranges.
Part No. 6-33010
Part 6-33009
DUAL ACTION
HAND PUMP
• Double Action Hand Pump for
inflating with both up and
down strokes while pumping
• Dual function pump: inflates
and deflates
• Volume: 2 x 2 litres
• Head pressure: 1000 mBar /
14.5 PSI
• Long, flexible hose and
multiple adapters included
• Dimensions: 46 x 22cm
Part 6-33016
MANOMETER 700mbar
Pressure Gauge for easy inflation
to correct tube pressure. Allows
check up to 700mbar (10psi)
Part No. 6-33013
Front
Back
2 SECTION PADDLE
HIGH PRESSURE AIR COMPRESSOR
• Powerful compressor type pump for inflating any
type of kayak or SUP
• Usable on any 12V DC outlet typically found in cars
and motor boats
• Integrated pressure selector for PSI, Bar and kPa:
switches pump off when the pre-selected pressure
is reached
• Hose with attached high-pressure (Halkey Roberts)
valve adapter included
• Hose with multiple low-pressure valve adapters
included (for Boston, Mini Boston, Double Lock and
Mini Double Lock valves)
• Dimensions: 20 x 19 cm • Airflow: 190L per minute
• Head pressure:
1030 mBar / 15 PSI
Part 6-33017
• Multiple feather settings
• Spoon-shaped fibreglass and reinforced
polypropylene blades
• Special aluminium shaft
• Cold weather grip with blade indicator
• 2 drip rings
• Dimensions: L: 230 x W: 18cm Weight: 1.8kg
Part 6-33014
COMPACT KAYAK PADDLE /
TWO CANOE PADDLE
• Kayak paddle (2.15m)
• Converts into 2 canoe paddles (2 x 1.50m)
• Aluminium shaft and polypropylene blades
Dimensions:
1 x Kayak Paddle: L: 215cm Weight: 1.8kg
2 x Canoe Paddles L: 150cm Weight: 0.9kg
Part 6-33015
Split into 2 canoe paddles
7
Besto Inflatable
Lifejackets
SAFETY EQUIPMENT
NEW RANGE
PERSONAL FLOTATION GUIDE (According the 89/686/EEG Directive ”Personal protective Equipment”)
Lifejacket 100N EN 395 / ISO 12402-4
Suitable for use at or on inland and sheltered waters. Offers limited safety in case of unconsciousness and when wearing
waterproof clothing. Suitable for children (from only a few months old) and adults, at or on inland and sheltered waters during
normal weather conditions and wearing light clothing. Offers good protection for both swimmers and non-swimmers. The 100N
lifejackets are designed to turn an unconscious user onto his/her back to keep the airways clear of the water.
For swimmers and non-swimmers. Suitable for use at or on open and coastal waters (offshore use). Offers limited safety in case
of unconsciousness when wearing heavy, waterproof clothing. This lifejacket is an advanced design offering enhanced buoyancy
for serious yachtsmen, swimmers and non-swimmers. Suitable for children and adults at or on open and coastal waters in heavy
weather conditions and when wearing light (rain) clothing. The 150N lifejackets are designed to turn an unconscious user onto
his/her back to keep the airways clear of the water.
Ideal for use with heavy, waterproof clothing at or on the sea in extremely heavy weather
conditions. Safe for use in the case of unconsciousness under almost all conditions.
6-30380
6-30386
6-30383
BESTO 165N LIFEJACKET
The Besto 165N inflatable lifejacket has a good body fit due to the soft
outer cover and special neck shape. The collar is strapped onto the back,
that gives a comfortable neck fit and also gives a good neck/head support
when the jacket is inflated.
Specification:
Size:
Weight Range:
Buoyancy:
System:
CO2 Cylinder:
Adult
50+kg
Inflatable 165N
United Moulders MK5
31 - 33g
Replacement Set UM MK5 165N Manual Part No. 6-30443
Replacement Set UM MK5 165N Auto
Part No. 6-30444
8
The jacket comes with a crotch strap as standard to enhance
performance and freeboard. Finished with edge binding all-around the
jacket, it has a buoyancy of 165N and is available in automatic or manual,
with or without safety harness and in various colours.
Webbing Type
Waistbelt
Waistbelt
Waistbelt
Waistbelt
Harness
Harness
Harness
Operation
Manual
Manual
Automatic
Automatic
Automatic
Automatic
Automatic
Colour
Red
Black
Red
Black
Red
Black
Navy
Part No.
6-30380
6-30381
6-30382
6-30383
6-30384
6-30385
6-30386
Besto Inflatable
Lifejackets
SAFETY EQUIPMENT
NEW RANGE
BESTO COMFORT FIT 165N
LIFEJACKET
A newly designed inflatable lifejacket, that
meets the highest standards of comfort.
Superb comfort is achieved with an ergonomic
design and lightweight soft flexible cover. The
special back panel and adjustable backstrap
ensure that the collar stays away from the neck
and creates optimal weight/pressure distribution
on the body for optimum comfort, especially
when used for a prolonged period of time.
Safety Features:
• Specially designed a-symmetrical bladder
ensures quick turning of the body
• High freeboard
• Maximum chin and head support
• 165 Newtons buoyancy
Fitted as Standard:
• A strong YKK burst zipper keeps the
bladder in place.
• Soft D-ring harness loops for
weight reduction
• A crotch strap as standard for
optimum safety.
• Reflective panels on outer cover for
high visibility in the night
• Available in 3 colour options
• Halkey Roberts V90000 system with
super bobbin
Specification:
Size:
Weight Range:
Buoyancy:
System:
CO2 Cylinder:
Adult
50+kg
Inflatable 165N
Halkey Roberts V90000
31 - 33g
Webbing Type
Harness
Harness
Harness
Operation
Automatic
Automatic
Automatic
Colour
Black/Grey
Black/Blue
Black/Pink
Replacement Set HR 165N Auto
Part No.
6-30395
6-30396
6-30397
Part No. 6-30442
BESTO 100N JUNIOR LIFEJACKET
This jacket is specially designed for young
children from 20kg approx.
It is automatically and manually activated
and has a very good body fit due to the
soft outer cover and special neck shape.
The collar is strapped onto the back,
giving a comfortable neck fit.
When inflated, by means of the 24 grams
CO2 cylinder, the jacket has 100N
buoyancy giving good neck/head support,
a good in-water body position as well as a
high Freeboard.
Fitted as Standard:
• Crotch strap, to enhance performance
and freeboard.
• Integrated Safety Harness
Specification:
Size:
Weight Range:
Buoyancy:
System:
CO2 Cylinder:
Junior
20 - 50kg
Inflatable 100N
United Moulders MK5
24g
6-30371
6-30372
6-30370
Webbing Type
Harness
Harness
Harness
Operation
Automatic
Automatic
Automatic
Colour
Blue
Pink
Red
Part No.
6-30370
6-30371
6-30372
Recharge Set UM MK5 100N Auto Part No. 6-30445
9
Besto Inflatable
Lifejackets
SAFETY EQUIPMENT
NEW RANGE
BESTO 300N LIFEJACKET
The Besto 300N Inflatable has a good body fit due to the
soft outer cover and special neck shape. The collar is
strapped onto the back giving a comfortable neck fit and
good neck/head support when inflated.
The jacket comes with a crotch strap as standard, to
enhance performance and freeboard. It is finished with edge
binding all-around and has a floating capacity of 300N.
This life jacket designed for use on open sea and in all
weather conditions including extreme weather.
Even when wearing heavy protective waterproof clothes,
the jacket remains safe and will rotate the body so that the
airways are clear of the water.
Webbing Type
Harness
Operation
Automatic
Colour
Black
Specification:
Size:
Weight Range:
Buoyancy:
System:
CO2 Cylinder:
Part No.
6-30390
Recharge Set UM MK5 300N Auto Part No. 6-30446
BESTO EXTREME 300N LIFEJACKET
The jacket is provided with these features as standard:
Tailored for extra comfort and provided with fleece
comfort collar
2
Double reflector strip on outer fabric
3
High durable 250 grams nylon coated outer skin
4
Provided with Clear Indicator UM system and “inspection
window” enabling you to check if the automatic function is
“stand by”
7
1
The Besto “Extreme” is the jacket when only the best is sufficient.
It has an exceptionally high standard of finish and is
manufactured of superior materials.
1
Adult
50+kg
Inflatable 300N
United Moulders MK5
60g
8
2
9
3
5
Easy adjusting by means of stainless steel side adjuster
6
Stainless steel interlock buckle + integrated safety harness
7
Incorporated ISO sprayhood
8
Mesh back side for comfortable fit
9
Solas approved sea light fitted inside
10
4
5
11
6
10 YKK Burst zipper closure
11 Double crotchstrap for extra safety
Specification:
Size:
Weight Range:
Buoyancy:
System:
CO2 Cylinder:
Adult
50+kg
Inflatable 300N
United Moulders CXI Clear Indicator
60g
Recharge Set CXI 300N Auto
Part No. 6-30448
Webbing Type
Harness
Operation
Automatic
Colour
Black
Part No.
6-30400
INFLATABLE ACCESSORIES
Halkey Roberts Sets
Description
Auto Set HR 150N/165N 33g Adult
United Moulders (CXI) “Clear Indicator” (Window) Sets
Part No.
6-30442
United Moulders (MK5) “All weather” (Standard) Sets
Description
Manual Set MK5 150N/165N 33g Adult
Auto Set MK5 150N/165N 33g Adult
Auto Set MK5 100N 24g Junior
Auto Set MK5 275N/300N 60g Adult
10
Part No.
6-30443
6-30444
6-30445
6-30446
Description
Auto Set CXI 275N/300N 60g Adult
Part No.
6-30448
For more Besto accessories
see pages 12-13
Besto Foam Lifejackets
SAFETY EQUIPMENT
NEW RANGE
BESTO 100N GULF LIFEJACKET
Fast donning style & inland passenger jacket.
• Easy storage
• Fast donning emergency jacket
• Fabric 100% polyester, UV durable
Size
Child
Junior
Adult
Type
Gulf 100N
Gulf 100N
Gulf 100N
Weight Range
30 - 50kg
50 - 70kg
70+kg
Min Required Buoyancy
60N
80N
100N
Part No.
6-30405
6-30406
6-30407
BESTO 100N BEBE LIFEJACKET
Bag containing
4 adult Gulf jackets
Part No. 6-30410
Extra safety due to:
Special kids style lifejacket in designer fabric.
Grabstrap
• Short model for more comfort
• Airex super soft PVC foam
• Open backside
• Buckles on backside
Big collar with extra buoyancy
Collar fastenings
Reflection & signalwhistle
Attachment for line
Strong “nexus” buckles on the back
Adjustable crotch strap
Type
Bebe Tot
Bebe
Weight / Height
<10kg, up to 80 cm
10 - 20kg, up to 110 cm
30N
30N
Besto Buoyancy
40N
50N
Part No.
6-30415
6-30416
BESTO RACINGBELT 100N LIFEJACKET
The front panels of these highly comfortable lifejackets are
designed as separate sections to ensure exceptional body
comfort and are suitable for both sexes. They feature top,
waist and bottom fastening to ensure a close body fit, and to
enhance body comfort and safety.
All sizes are designed with Fluorescent
Orange High Visibility outer fabrics, signalling
whistle and reflective applications for quick
recognition and rapid rescuing in case of an
emergency. The jackets are provided with
crotch straps to prevent the lifejacket from
creeping up.
Features
• Separate filling compartments in front panels
for extra comfort
• 100% Polyester high visible fabric EN471
• Attachment strap included (baby size only)
• Crotch strap included
• PE foam filling
• Conforms to CE EN395 / ISO12402-4
Adult
Size
Baby
Toddler
Child
Junior
Small Adult
Medium Adult
Large Adult
Ex Large Adult
Child & Junior
Weight
5 - 15kg
15 - 20kg
20 - 30kg
30 - 40kg
40 - 60kg
60 - 70kg
70kg+
70kg++
30N
35N
40N
50N
70N
80N
100N
100N
Baby & Toddler
Besto Buoyancy
40N
45N
55N
60N
80N
100N
115N
120N
Part No.
6-30350
6-30351
6-30352
6-30353
6-30354
6-30355
6-30356
6-30357
11
Besto Accessories
SAFETY EQUIPMENT
NEW RANGE
DOG BUOYANCY AIDS
This buoyancy aid is specially designed for the safety of man’s best friends. Your pet will be
highly visible in the water due to the hi-viz fabric.
Features a grab loop on the back for quick recovery out of the water.
Ergonomic design, three strong nexus buckles and an extra D-ring for attaching a leach.
Size
Extra Small
Small
Medium
Large
Extra Large
Weight
0 - 4kg
4 - 8kg
8 - 15kg
15 - 40kg
40kg+
Part No.
6-30360
6-30361
6-30362
6-30363
6-30364
BESTO HORSESHOE
BUOY SETS
BESTO HORSESHOE
BUOYS
Complete set containing: Horse
Shoe buoy, light and steel bracket
for rail connection.
Horse Shoe with replaceable outer
cover. Available in three colours,
yellow, orange and white.
Colour
Orange
Yellow
White
Part No.
6-30425
6-30426
6-30427
Colour
Orange
Yellow
White
BESTO MAN OVERBOARD
RESCUE SET
Complete man overboard rescue set
containing strong PVC “wipe clean”
cover container, very durable and
easy to clean with rail connection,
and buoy with 40 meter floatation line.
Colour
Yellow
White
12
Part No.
6-30420
6-30421
Part No.
6-30428
6-30429
6-30430
BESTO 30M RESCUE LINE
30 meter floatation rescue line, including bag and steel bracket for rail
connection, (Coast Guard line).
Part No. 6-30435
Besto Accessories
SAFETY EQUIPMENT
NEW RANGE
SAFETY LINE
SAFETY LINE
SAFETY LINE
Besto elastic lifeline with 2 double
action hooks. Approved according
with ISO 12401.
Part No. 6-30438
Besto lifeline with 2 hooks.
Approved according with the EN1095.
Breaking load 2000kg.
Part No. 6-30439
Besto lifeline with 3 hooks.
Approved according with the EN1095.
Breaking load 2000kg.
Part No. 6-30440
SEPARATE CROTCHSTRAP
SOLAS LIGHT C/W BRACKET
A crotchstrap gives more
freeboard of the airways.
Can be placed on all Besto
Inflatables.
Part No. 6-30449
The alkaline powered light is constructed for
easy attachment and replacement.
• Light intensity min. 0,75 cd.
• Light duration min. 8 hours
• Battery Life 5 years
• Approved according European
standards on Marine Equipment
and therefore fitted with the CE Steering Wheel mark of approval.
Part No. 6-30450
Reliability
Performance
Compliance
See Section 6 for
details or visit
our website.
13
Coleman Xtreme®
Coolers
GENERAL BOAT EQUIPMENT
COLEMAN XTREME® COOLERS
Designed with premium insulation technology; keeping the contents cold for days, these coolers are
perfect for long road trips, days spent boating, on a campsite, or even sporting events. As an added
feature, the lids can be used as a seat (up to 113kg).
26L XTREME® COOLER
33L XTREME® COOLER
47L XTREME® WHEELED COOLER
Part No. 6-60300
Part No. 6-60301
Part No. 6-60302
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
Cooling
Performance:
Dimensions:
Weight:
36 Cans (0.33L)
26 Litres
Robust lid, 2L height, cup
holders, easy-clean top
3 days ice
Internal: 38 x 25 x 31cm
External: 46 x 33 x 40cm
2.7 kg
Cooling
Performance:
Dimensions:
Weight:
46 Cans (0.33L)
33 Litres
Hinged lid, 4 beverage holders.
Rustproof, leak-resistant drain,
2-way handles for easy lifting
and carrying
4 days ice
3.4 kg
Weight:
66L XTREME® COOLER
91L XTREME® COOLER
Part No. 6-60303
Part No. 6-60304
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
100 Cans (0.33L)
66 Litres
Robust lid, cup holders, comfort handles,
easy-clean top
Cooling Performance: 5 days ice
Dimensions:
Weight:
6.1 kg
5.9 kg
130 Cans (0.33L)
91 Litres
Hinged lid. 4 cup holders. Rustproof,
leak-resistant drain, 2-way handles for easier
lifting and carrying.
Cooling Performance: 5 days ice
Dimensions:
Weight:
14
Cooling
Performance:
Dimensions:
84 Cans (0.33L)
47 Litres
Robust lid, telescopic handle,
durable wheels, easy-clean top
5 days ice
7.4 kg
Coleman Coolers & Gear
Bags & Campingaz Stove
COLEMAN XTREME® MARINE COOLERS
A must-have for fishermen, Coleman® Xtreme® Marine Coolers are designed specifically for use
in the hot sun. UVGuard™ reflective colour additives protect the cooler, fighting against yellow
discolouration and cracking caused by sun exposure. Combined with the Coleman Xtreme®
cooling qualities, these coolers are perfect for sport, fishing, or a day on the beach.
47L XTREME® MARINE WHEELED
COOLER Part No. 6-60306
66L XTREME® MARINE COOLER
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
Cooling
Performance:
Dimensions:
Weight:
84 Cans (0.33L)
47 Litres
Antimicrobial protection,
telescopic handle, durable
wheels, UV blocker
5 days ice
5.9 kg
Part No. 6-60307
Cooling
Performance:
Dimensions:
Weight:
CAMPINGAZ® CAMP'BISTRO® STOVE
User-friendly, compact and portable this single
burner stove is powerful, cordless and has
precise power adjustment for ease of use.
SMALL DRY GEAR BAG
Size: 201⁄2 '' x 101⁄2 '' (520 x 266mm)
Part No. 6-22850
100 Cans (0.33L)
66 Litres
Robust lid, antimicrobial
protection, stainless steel
hardware, UV blocker
5 days ice
6.1 kg
MEDIUM DRY GEAR BAG
Size: 23'' x 121⁄2 '' (584 x 317mm)
Part No. 6-22851
• Gas cartridge safety locking system
• Enamelled pan support for easy cleaning
• Hard plastic carry case included
• Built-in piezo burner ignition
• 2300W Power
• Uses Campingaz® CP250 cartridges
(Part no. 6-01343)
• Boil time: 6 mins
• Running time: 1h 15 mins
on 1 x CP250
• Dimensions: 33 x 28 x 9cm
• Weight: 2.3kg
Part No. 6-01300
LARGE DRY GEAR BAG
Size: 241⁄2 '' x 15'' (622 x 381mm)
Part No. 6-22852
15
Coleman CXS+
Headlamps
HEADLAMPS & TORCHES
NEW RANGE
COLEMAN EXCLUSIVE ELECTRIC LIGHT FEATURES GUIDE
Standard electric lights lose battery power over time even when they’re
switched off because the battery is never truly disengaged from the electric
contacts. With the patent pending Coleman BatteryLock™ technology and
a simple twist of the head, battery loss will become a thing of the past.
With innovative Coleman® REAX™ autoadjusting, light-sensing technology, Coleman®
headlamps adapt their own beam pattern to
the surroundings and needs of the user.
DISCONNECT
BATTERY
CONNECT
BATTERY
Turn the head to tighten
the connection; when
red line disappears,
the flashlight is on and
ready for use.
Twist in the opposite
direction when you’re ready
to store the flashlight – when
you see the red line, the
connections are separated
and flashlight is safe to store.
A revolutionary system inspired by kinesics, the interpretation of
body movements. Designed to maximize headlamp functionality,
the KineSix™ system is controlled by the users’ hand
movements, removing the need to operate the product manually.
HOW DOES IT WORK? To cycle through light modes and light intensities, the user simply waves
their hand within 3cm of the sensor on the front of the headlamp. This avoids having to deal with
an on/off button while performing a strenuous activity or wearing thick gloves.
To activate: hold down on/off button for 4
seconds to switch to REAX™ auto adjustment
mode, the user is then free to roam as they
wish, while the smart sensor automatically
adjusts to the light to the settings they require.
Proximity Lighting: when focusing on items at
close proximity, lumens will decrease & the beam
will have a flooding effect to increase visibility.
Mobility: When on the move, the beam is wide
and of medium strength to highlight terrain.
Long Distance: When looking into the distance,
lumens increase stretching the light beam further.
CXS+ HEADLAMPS
Keep your hands free and stay focused on more important things with our innovative REAX™ auto-adjusting CXS+ headlamps. Designed with light
sensing technology, the headlamps automatically adapt their beam pattern to the surrounding environment and needs of the wearer. The advanced
headlamps also feature Coleman BatteryLock™ technology meaning they are ready to go whenever you are.
CXS+ 200 HEADLAMP
CXS+ 250 HEADLAMP
CXS+ 300R HEADLAMP
With a durable DuraGuard™ construction, this
auto-adjusting headlamp features 5 different
lighting modes. Equipped with an advanced
REAX™ sensor, this practical headlamp also
benefits from a comfort tension headband system.
Part No. 6-11810
Made from robust DuraGuard™, this autoadjusting headlamp provides the wearer with
hands-free KineSix™ hand-swipe control,
5 different lighting modes and a super-bright
250 lumen output.
Part No. 6-11811
The next generation of USB-compatible, gesture
controlled headlamps has arrived. Featuring 5
separate light modes and handsfree KineSix™
control, this fully-featured headlamp can be easily
recharged for maximum convenience.
Part No. 6-11812
Specification:
Light output:
Beam distance:
Runtime:
Batteries:
Features:
Specification:
Light output:
Beam distance:
Runtime:
Batteries:
Features:
Specification:
Light output:
Beam distance:
Runtime:
Batteries:
IPX level:
Size:
Weight:
200*/20* lumens (max/min)
30*/5* meters
5*/50* hours
3 AAA Duracell® included
BatteryLock™ DuraGuard™
REAX™ Auto Adjust
IPX 4
8.8 x 4.55 x 3.6cm
Headband: 60cm
125g
IPX level:
Size:
Weight:
40*/5* meters
4*/50* hours
3 AAA Duracell® included
REAX™ Auto Adjust
KineSix™ Hand-Swipe
IPX 4
8.8 x 4.55 x 3.6cm
Headband: 60cm
125g
Features:
IPX level:
Size:
Weight:
16
50*/5* meters
2.5*/50* hours
Lithium ion rechargeable:
USB inc.
REAX™ Auto Adjust, KineSix™
Hand-Swipe, Lithium Ion
Rechargeable (via USB)
IPX 4
8.8 x 4.55 x 3.6cm
Headband: 60cm
121g
Coleman BatteryLock™
Divide Torches
HEADLAMPS & TORCHES
NEW RANGE
BATTERYLOCK™ DIVIDE TORCHES
Don't be caught out with a flat battery again! The simple and easy-touse, patent-pending BatteryLock™ flashlights are capable of storing
battery power for years. With a simple twist the battery is disengaged,
preventing residual battery loss and extending battery life.
DIVIDE+ 75 TORCH
DIVIDE+ 200 TORCH
DIVIDE+ 250 TORCH
Sturdy and weather resistant, this compact
BatteryLock™ flashlight with 75 lumen output
guarantees you won’t be left in the dark.
Part No. 6-11820
Compact yet bright, this lightweight, aluminium
flashlight emits a powerful 200 metre light beam
and features the advanced BatteryLock™ system.
Part No. 6-11821
Specification:
Light output:
Beam distance:
Runtime:
Batteries:
Features:
IPX level:
Size:
Specification:
Light output:
Beam distance:
Runtime:
Batteries:
Features:
IPX level:
Size:
Including a tough, anodized aluminium body and
an impressive 35 hours of continual run time, this
bright flashlight incorporates Coleman’s innovative
BatteryLock™ system.
Part No. 6-11822
Weight:
Exterior:
75 lumens
84 meters
5 hours
2 x AAA Duracell® included
Battery Lock™ patent pending
IPX 4
2.5cm face diameter x 14.9cm
length (1.7cm body diameter)
146g
Anodized aluminium
Weight:
Exterior:
200/20 lumens (high/low)
200/70 meters
2/35 hours
3 x AAA Duracell® included
IPX 4
229g
Anodized aluminium
Specification:
Light output:
Beam distance:
Runtime:
Batteries:
Features:
IPX level:
Size:
Weight:
Exterior:
160/40 meters
3/35 hours
2 x AA Duracell® included
IPX 4
202g
Anodized aluminium
DURACELL BATTERIES
Type
Pack Qty
Part No.
D Cells
2
Q-BA-MN1300
C Cells
2
Q-BA-MN1400
AA Cells
4
Q-BA-MN1500B4
9V Cell
1
Q-BA-MN1604
AAA Cells
4
Q-BA-MN2400
DIVIDE+ 300 TORCH
DIVIDE+ 700 TORCH
With an expansive 300 metre beam distance, this
sturdy flashlight combines a weather resistant and
sturdy construction with our patent-pending
BatteryLock™ system.
Part No. 6-11823
Tough and always ready, featuring a 700 lumen
light output and a beam distance of 330 metres,
you can trust this BatteryLock™ flashlight to keep
you out of the dark.
Part No. 6-11824
Specification:
Light output:
Beam distance:
Runtime:
Batteries:
Features:
IPX level:
Size:
Specification:
Light output:
Beam distance:
Runtime:
Batteries:
Features:
IPX level:
Size:
Weight:
Exterior:
300/100 meters
2/50 hours
IPX 4
512g
Anodized aluminium
Weight:
Exterior:
330/110 meters
7/55 hours
IPX 4
1315g
Anodized aluminium
17
Kuuma Gas and
Charcoal Grills
ON DECK GRILLS
NEW RANGE
KUUMA STOW ‘N’ GO GRILLS
These grills are designed for use on boats and built to withstand harsh marine environments. They are constructed of
high-quality stainless steel and come fully assembled. Featuring a stay-cool handle, they can be mounted to any Kuuma
rail, rod or pedestal mount. Stow ‘N’ Go Grills have integrated fold-away legs enable easy grilling on any flat surface.
STOW ‘N’ GO 125 S/S GAS GRILL
This grill offers premium quality construction and
convenient portability. The compact size is perfect for
when space is at a premium.
Designed for high pressure propane/butane disposable
Campingaz® Easy Clic® CV300 Plus canisters.
Part No. 6-58144
Specifications:
Cooking Surface Area:
Dimensions:
125 sq. in. (806.5cm2)
19.75 x 11.25 x 11''
(50 x 28.5 x 28cm)
Stay-cool handle
Ready to use - no
assembly required
High grade
stainless steel
Latching
lid
Folding legs
Removable grease
tray easy cleaning
Mounting
bracket
STOW ‘N’ GO 160 S/S GAS GRILL
This outstanding grill offers premium quality construction
and convenient portability.
Available in two versions; with regulator, or with
regulator, thermometer & igniter.
Designed for high pressure propane/butane disposable
Campingaz® Easy Clic® CV300 Plus canisters.
Specifications:
Dimensions:
160 sq. in. (1032cm2)
23.25 x 11.25 x 11''
(59 x 28.5 x 28cm)
Stow ‘N’ Go 160 Gas grill with regulator Part No. 6-58138
Stow ‘N’ Go 160 Gas grill with regulator, thermometer & igniter Part No. 6-58139
STOW ‘N’ GO 160 S/S CHARCOAL GRILL
This premium quality grill uses any standard BBQ charcoal. Includes
inner lid liner to help protect cover from high-heat discoloration.
Part No. 6-58110
Specifications:
Fuel:
Dimensions:
Charcoal
160 sq. in. (1032cm2)
18.5 x 11.25 x 11''
(47 x 28.5 x 28cm)
KUUMA CHARCOAL KETTLE GRILL
This kettle grill has a compact stylish design and is made
in high grade stainless steel. It uses any standard BBQ
charcoal and has an easy-clean charcoal tray.
Part No. 6-58103
Specifications:
Fuel:
Charcoal
Cooking Surface Area: 15'' Dia (38cm)
Dimensions (W x L x H): 16 x 17 x 11.5''
(40.5 x 43 x 29cm)
18
Stay-cool
handle
Standard
mounting bracket
Latching
hinged lid
Air damper
for heat /
smoke control
Kuuma Grill Accessories
& Cookware Sets
ON DECK GRILLS
All mounts made of anodized aluminum with stainless steel hardware (pedestal mount has plastic base).
60º Rod Holder Mount
Pedestal Grill Mount
Rail Grill Mount
Universal Rail Mount
Quick Release Rail Mount
60-degree angle and
adjustable height. Works
with most 60° rod holders
with cross pins enabling you
to turn any fishing rod
holder into a grill mount.
Part No. 6-58180
Fits all Kuuma Grills.
Includes pedestal,
hardware and base ring.
For mounting in stationary
locations such as a dock,
deck, swim platform or
patio. 30" (762mm) tall.
Part No. 6-58184
Mount your Kuuma grill to your
boat’s railing. Inboard/outboard
style mount is designed to allow
your grill to hang outside the
rail, helping to protect fiberglass
from spills and splatters.
For use with 7⁄8 '' to 11⁄4 ''
(22 32mm) horizontal round or
square rail
Part No. 6-58182
Solves many standard
mounting problems.
It allows you to mount and
level your Kuuma grill on
any angle rail from vertical
to horizontal.
Works with 7⁄8 '' to 11⁄4 ''
(22-32mm) square or
round rails
Part No. 6-58183
Quick release feature
makes the grill easy to
mount and remove for quick
and easy storage.
For use with 7⁄8 '' to 11⁄4 ''
(22-32mm) square or
round rails
Part No. 6-58195
6-58180
NEW RANGE
KUUMA MOUNTS
6-58195
6-58184
6-58182
6-58183
CAST IRON GRIDDLE
FISH & VEGGIE GRILL TRAY
CAST ALUMINIUM GRIDDLE
Cast Iron griddle with stainless steel handles.
Two-sided for smooth or raised-rib surface.
For use with all Stow ‘n’ Go grills. Reversible.
Dimensions: 12.5" x 8.25" (317 x 209mm).
Part No. 6-58200
Dishwasher safe s/steel tray is perfect for delicate
foods. Removeable handle can be attached on
any side of tray. Fits all Kuuma brand grills.
Dimensions: 8" x 10" (203 x 254mm).
Part No. 6-58380
Griddle with built-in handles. Two-sided for
smooth or raised-rib surface. For use with all
Stow ‘n’ Go grills. Reversible. 16" x 8".
Dimensions: 16" x 8" (406 x 203mm).
Part No. 6-58390
STOW ‘N’ GO GRILL TRAY
KUUMA NESTING COOKWARE SETS
For all Stow 'N' Go grills providing a
convenient place to put your food
while grilling. Slide the tray over the
front lip of your grill to attach; slide
off for storage.
Made from high quality 18/10 stainless steel with an
aluminum core, this cookware is dishwasher safe,
compatible with induction cooking and can even be
used in the oven when the removable handles are
not attached.
This attractive stainless steel sets are low
maintenance, rust-resistant and non-reactive, and
conveniently save valuable space by storing in less
than a ½ cubic foot area.
Dimensions: 6.75'' x 12.13'' x 1.5'' (171 x 308 x 38mm)
Part No. 6-58231
GRILL COVERS
For use on a mounted grill as a cover or a portable grill as a tote.
Heavy-duty weather resistant acrylic provides long lasting protection in
every storage environment.
Part No. 6-58370 7 Piece Nesting Set
Part No. 6-58371 10 Piece Nesting Set
7 Piece Set Includes:
Cover for all Stow 'N' Go Grills
Part No. 6-58300
Cover for Kettle Grill
Part No. 6-58319
1 x Dome Lid,
1 x Stepped Lid,
1 x 2 Qt. Saucepan
1 x 3 Qt. Saute Pan
1 x 5 Qt. Stock Pot
1 x Handle
1 x Storage Strap
10 Piece Set Includes:
1 x Dome Lid,
1 x Stepped Lid,
1 x 1.5 Qt. Saucepan
1 x 2 Qt. Saucepan
1 x 3 Qt. Saute Pan
1 x 5 Qt. Stock Pot
2 x Handles
1 x Storage Strap
19
Camco Cleaning &
Boating Attachments
BOAT MAINTENANCE
NEW RANGE
CAMCO MULTIPURPOSE HANDLES
5-41912
5-41900
5-41916
5-41902
FIXED LENGTH HANDLES
Teardrop profile. Anodized
aluminum construction with
non-slip TPE hand grip.
Length
2' - 4' (60 - 120cm)
Teardrop profile. Anodized aluminium construction.
3' - 6' (90 - 180cm)
Each handle has two non-slip TPE hand grips.
5' - 9' (150 - 275cm)
* comes supplied with boat hook (5-41940) attached. 6' - 11' (180 - 335cm)
TELESCOPIC HANDLES
Length
2' (60cm)
4' (120cm)
Part No.
5-41900
5-41902
Part No.
5-41910
5-41912*
5-41914*
5-41916
CAMCO MULTIPURPOSE HANDLE BRUSH HEAD ATTACHMENTS
7" wide brush head. Rubber perimeter bumper. Available in 4 textures.
Extra Soft Light Blue P/No. 5-41920
Soft Dark Blue Part No. 5-41922
Medium Yellow Part No. 5-41924
Stiff White Part No. 5-41926
CAMCO MULTIPURPOSE HANDLE CLEANING ATTACHMENTS
Wash Head with Synthetic Wool
Pad - Part No. 5-41930
Replacement Pad P/No. 5-41932
Wash Head with Microfibre Pad
- Part No. 5-41948
Replacement Pad P/No. 5-41950
PVA Mop Head Part No. 5-41934
Hand Held Squeegee 14''
Part No. 5-41936
Adapter Part No. 5-41938
CAMCO MULTIPURPOSE HANDLE BOATING ATTACHMENTS
Boat Hook Part No. 5-41940
Hook depth: 1.5'' (38mm)
20
Fishing Gaff Part No. 5-41942
Hook depth: 3.5'' (89mm)
Landing Net Part No. 5-41944
17'' x 20'' x 30'' deep
(432 x 508 x 762mm)
Paddle Blade Part No. 5-41946
22'' long x 8'' wide (559 x 203mm)
XL COLLAPSIBLE BUCKET
ROUND COLLAPSIBLE BUCKET
18" wide for ease of use with large wash
brushes. Collapses to 23⁄4 " tall to fit in its
own easy-to-carry storage bag (included).
Made with durable watertight fabric.
Dimensions: 181⁄4 " x 91⁄2 " x 101⁄2 "
(463 x 241 x 267mm)
Capacity: 5 gallon (18 Litre)
Part No. 5-42973
The perfect size boating, fishing, camping and
more. Watertight fabric, opens easily to 9.25"
(235mm) tall and folds to less than 2" (50mm)
for compact storage.
Zippered storage bag included.
Capacity: 3 gallon (11 Litre)
Part No. 5-42993
Wilks PVC Fendering
FENDERING
NEW RANGE
FLEXIBLE PVC
BOAT FENDERING
• Flexible PVC U fendering profile
• Manufactured in a UV stabilised, phthalate free, and 100%
recyclable compound
• Non-marking PVC material provides the perfect alternative
to rubber U fendering which is prone to leaching its colour
on both your own boat and those around you.
• Softer material grade to provide an easier product
fit and mimics the feel of rubber (U & D profiles)
PVC U FENDERING
The U fender is designed to fit over the hull join
and provide protection to a high contact area.
U Fender to fit over a 9mm flange
Length
9m
12m
15m
Black P/No.
5-62000
5-62002
5-62004
White P/No.
5-62001
5-62003
5-62005
D Fender with 32mm base
PVC D FENDERING
The D fender design delivers a high level of
impact protection making them well suited to
the marine environment.
Length
9m
12m
15m
Black P/No.
5-62040
5-62042
5-62044
White P/No.
5-62041
5-62043
5-62045
U Fender to fit over a 6mm flange
Length
6m
9m
15m
Black P/No.
5-62020
5-62022
5-62024
D Fender with 22mm base
Length
Black P/No.
9m
5-62060
15m
5-62062
White P/No.
5-62021
5-62023
5-62025
White P/No.
5-62061
5-62063
PVC LIPPED FENDERING
This profile is supplied as outer body and insert.
PVC EDGE TRIM
Edging trim to fit up to a 3mm panel thickness.
Dimensions (approx):
Width: 10mm
Height: 13.5mm
Length: 9m
Colour
Black
White
Part No.
5-62100
5-62101
Lipped Fender with 27mm base
Height x Length Black P/No. White P/No.
16mm x 9m
5-62080
5-62081
16mm x 15m
5-62082
5-62083
GRP End Cap for above:
Black: P/No. 5-62090 White: P/No. 5-62091
Lipped Fender with 50mm base
Height x Length Black P/No. White P/No.
21mm x 10m
5-62120
5-62121
21mm x 15m
5-62122
5-62123
21mm x 20m
5-62124
5-62125
No End Cap available.
21
Wilks Traditional Range
& Decking Pads
FENDERING & DECKING
NEW RANGE
WILKS TRADITIONAL RANGE
The ultimate alternative to wooden
rubbing strakes, handrails and toe rails.
This range has been created with the traditional boating materials firmly in mind, thus capturing the beauty of wood
whilst removing the maintenance. Supplied in a sanded finish to give an attractive woodgrain effect whilst offering all
the qualities of PVC to provide the ultimate alternative to wood. It is manufactured from 100% recycled Dek-King®,
and so reduces waste.
TOP CAPPING PROFILES
Partially sanded for final finishing
after installation.
Width
105mm
120mm
Height
35mm
35mm
PVC WOOD SECTION
Part No.
5-62150
5-62151
Width
70mm
Height
13mm
Length
4m
TOERAIL SECTION
HANDRAIL SECTION
Supplied pre-drilled and partially sanded for final finishing after installation.
Supplied pre-drilled and partially
sanded for final finishing after
installation.
Incorporates an aluminium
strengthening bar and is supplied
with end plug to cover fittings.
Width x Height: 30 x 60mm
Length
1m
2m
Length
4m
4m
• UV Resistant
• Low maintenance
• Non-marking
• Superior performance
• Simple installation
• 100% recycled
Length
1m
2m
3m
5m
S/S Toe Rail
Capping
Part No.
5-62153
5-62154
Can be fitted with a 25mm
stainless steel strip and works as
a fender or plain as a toe rail.
Length: 4.89m Part No. 5-62161
Part No.
5-62156
5-62157
5-62158
5-62159
Length
5m
Part No.
5-62160
WILKS DECKING PADS
Available in 3 sizes, these self adhesive decking pads are easy to fit;
enhancing steps or deck access treads in cockpit or deck areas.
A real wood look but with
the qualities of PVC,
so removing the
maintenance.
Supplied in a sanded finish to
give an attractive woodgrain effect.
22
Letter
A
B
C
Length
250mm
500mm
750mm
Width
125mm
125mm
125mm
Part No.
5-62170
5-62171
5-62172
Part No.
5-62152
Wilks Dek-King
DECKING
NEW RANGE
WILKS DEK-KING BOND The Ultimate Alternative to Traditional Teak
The original Dek-King®, a well-established and proven system which has been sold globally for many
years. Designed for DIY fabrication without the need for expensive specialist tools, Dek-King® Bond
features a tongue and groove joint and a sanded finish on the base to enhance adhesion. These
profiles have a traditional teak finish with black caulking.
CAULKED SINGLE PLANK
CAULKED MARGIN EDGE
PLAIN MARGIN EDGE
50mm wide x 10m long. Part No. 5-62180
BULLNOSE PROFILE
T CAULKING STRIP
70mm wide x 10m long.
Part No. 5-62183
5mm wide x 10m long.
Black
Part No. 5-62184
For use on stairs or any other area where an overhang is desirable.
CAULKING 3 PLANK
BULLNOSE STEP
SOLID KING PLANK 125mm wide x 10m long roll. Part No. 5-62186
This plank has no caulking effect or channels incorporated.
Supplied in a partly sanded finish to give a teak appearance.
• Gives a solid teak appearance to
steps and edges
• Supplied in a sanded finish to give a
teak appearance
17mm wide x 45mm high x 5m long.
Part No. 5-62187
STELMAX ADHESIVE
Used to join the strips of Dek-King®
Bond together This 135ml tube will
bond approximately 2m2 of tongue
and groove joint.
Clear Part No. 5-62188
Black Part No. 5-62189
Dek-King Bond
can be bonded to
the deck surface
using ProLoc 248
Bedding Adhesive
- see page 32.
Please note: 1 x 10m coil of 50mm Dek-King
will cover an area of 0.5m2
23
Riptide
Cleaning Products
BOAT MAINTENANCE
RIPTIDE EXTERIOR
MULTIPURPOSE
CLEANER
RIPTIDE INTERIOR
ALL-SURFACE
CLEANER
• Cleans GRP, Gel coat and all
hard washable surfaces.
• Contains no solvents or CFC’s
• Leaves no residue of
unnecessary chemicals.
• Exceeds legal requirements
for biodegradability
• Safe to marine life when
used as instructed.
• Suitable on all washable surfaces, GRP, Gel
coat, laminates.
• Conforms to EU Directive on Biodegradability.
500ml Part No. 5-81328
• Cuts through grease and grime
• Non-Toxic, food safe for
galley surfaces
• Chrome-friendly
• Contains no solvents or CFC’s
• No residue of unnecessary
chemicals
• Safe to use, minimum impact on aquatic life.
• Suitable for galley and heads surfaces, plastics,
GRP, shower rooms, basins acrylic and chrome.
• Conforms to EU Directive on Biodegradability.
500ml Part No. 5-81329
RIPTIDE HULL AND DECK
MAINTENANCE SHAMPOO
RIPTIDE 3 IN 1 TOILET CLEANER
• Cleans GRP, Gel coat and
all hard washable surfaces
• Contains no solvents
or CFC’s
• Leaves no residue of
unnecessary chemicals.
• Exceeds legal
requirements for
biodegradability
• Safe to marine life when
used as instructed
• Conforms to EU Directive on Biodegradability
• Sodium Chloride Free
1 Litre Part No. 5-81331
• Triple action: cleans,
decalcifies and freshens
exposed surfaces
• Lubricates moving parts
and seals
• Promotes bio-degrading
action in holding tank
• Hygienic, naturally powerful
and safe to use
• Minimum impact on aquatic life
• Suitable for septic holding tanks
500ml Part No. 5-81333
RIPTIDE WIPE CLEAN GRP CLEANING POWDER
• A versatile cleaner to remove stubborn stains
on all GRP surfaces
• Will remove algae and rust staining
850g Part No. 5-81335
24
RIPTIDE PORTHOLE
AND GLASS
CLEANER
• A smear and streak free
formulation ideally suited to
days marine environment
• Spray directly on to glass or
mirror and wipe off with
paper towel until dry
300ml Part No. 5-81330
RIPTIDE ECO-FRIENDLY
GRP POLISH
• Gently buffs and polishes to a
brilliant shine without scratching
• Totally safe on all marine
materials
• Suitable for all kinds of
surfaces. GRP, hulls,
decks and super
structure, Gel Coat,
Cookers, fridges, enamel,
stainless steel & chrome
300ml Part No. 5-81332
RIPTIDE WATER PROOFER
• A specially developed
formulation of water based
waxes and polymers to
provide a Water Proofer
ideally suited to the marine market
• Safe to apply directly on to spray
covers, sail covers,
clothing etc.
• Please note: NOT a
permanent water proofer
300ml Part No. 5-81334
RIPTIDE FULL ECO-VALET KIT
RIPTIDE INTERIOR ECO-VALET KIT
RIPTIDE EXTERIOR ECO-VALET KIT
Supplied in a PVC drawstring bag containing:
• 1 litre Hull and Deck Shampoo
• 500ml Exterior Multipurpose Cleaner
• 500ml Interior All Surface Cleaner
• 500ml 3 in 1 Toilet Cleaner
• 300ml Porthole and Glass Cleaner
• Sponge
Part No. 5-81325
• 500ml 3 in 1 Toilet Cleaner
• 500ml Interior Cleaner
• 300ml Porthole and Glass Cleaner
• Sponge
Part No. 5-81326
• 1 litre Hull and Deck Shampoo
• 500ml Exterior Multipurpose Cleaner
• 300ml 3 in 1 Silicon Free Polish
• Sponge
Part No. 5-81327
Polymarine Inflatable
Boat & Rib Care
BOAT MAINTENANCE
HYPALON FABRIC
PVC FABRIC
Hypalon inflatable boat material for repairing damaged tubes & floors.
Hypalon is a synthetic rubber material patented by DuPont. Hypalon has
many applications in many industries and it has proven itself as a
material with excellent air holding capabilities and oil resistance. Hypalon
coated onto polyester or nylon fabric with an interior coating of neoprene
is a very reliable and durable inflatable boat fabric and can last for more
than a decade even in the harshest environments.
PVC inflatable boat material for repairing damaged tubes & floors.
PVC is a vinyl polymer chemically known as polyvinyl chloride. In the
inflatable boat industry it is used as a coating on polyester or nylon to
increase the strength and tear resistance. Because it is a type of plastic,
it can be thermobonded or glued. This allows the manufacturer to mass
produce boats on a large scale with machines and unskilled labour.
Half roll (70cm x 15cm)
Half roll (70cm x 15cm)
Colour
Black
Blue
Grey
Light Grey
Orange
Red
White
Yellow
Part No.
5-81040
5-81041
5-81042
5-81043
5-81044
5-81045
5-81046
5-81047
Full roll (145cm x 15cm)
Colour
Black
Blue
Grey
Light Grey
Orange
Red
White
Yellow
Part No.
5-81050
5-81051
5-81052
5-81053
5-81054
5-81055
5-81056
5-81057
Colour
Black
Blue
Grey
Orange
Red
White
Part No.
5-81060
5-81061
5-81062
5-81064
5-81065
5-81066
Full roll (145cm x 15cm)
Colour
Black
Blue
Grey
Orange
Red
White
Part No.
5-81070
5-81071
5-81072
5-81074
5-81075
5-81076
For advice on selecting the correct fabric go to: www.polymarine.com
2990 HYPALON ADHESIVE Inflatable Boat Adhesive.
3026 PVC ADHESIVE Inflatable Boat Adhesive.
Solvent based polychloroprene rubber glue giving high strength bonds,
particularly suitable for emergency repair of inflatable boats, RIBs and
Dinghies. Will bond natural rubber, polychloroprene, butyl, nitrile ,
hypalon and polyurethane rubber materials, leather.
Solvent based polyurethane adhesive giving excellent adhesion to both
plasticised and unplasticised PVC nylon fabric, polyurethane fabric and
foam. Use for repair of all PVC inflatables including Zodiac/Bombard
"Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex".
PLEASE NOTE :- For a complete bond 2903 solvent (Part No. 5-81125 or
5-81126), must be used before the adhesive is applied.
Hypalon 1 Part Adhesive
• Excellent resistance to heat, salt
water and humidity
• Easy to use as a single part glue
for quick and temporary repairs
• Cleaner - P510 Hypalon Solvent
(Part No. 5-81120 or 5-81121)
70ml - Part No. 5-81101
5-81101
5-81103
5-81104
!
PVC 1 Part Adhesive
• Easy to use as a single part glue
for quick and temporary repairs
• Contact bonds in 10-15 minutes,
full cure 48 hours
70ml - Part No. 5-81111
Hypalon 2 Part Adhesive
As above, plus:
• Easy to mix two part system
supplied in sets with requisite
amount of curing agent; can be
used as a single part for quick
temporary repairs
full cure 48 hours
• Coverage - using 2 coats, 1 litre
bonds 1 square metre
• Easy to apply by brush or roller
PVC 2 Part Adhesive
• Easy to mix two part system
supplied in sets with requisite
amount of curing agent; can be
used as a single part for quick
temporary repairs
full cure 48 hours
• Coverage - using 2 coats, 1 litre
bonds 1 square metre
• Easy to apply by brush, roller or
serrated trowel
250ml Tin & Curing Agent
Part No. 5-81103
250ml Tin & Curing Agent
Part No. 5-81113
1 Litre Tin & Curing Agent
Part No. 5-81104
1 Litre Tin & Curing Agent
Part No. 5-81114
DO NOT USE HYPALON PRODUCTS ON ANY
PVC COATED FABRIC SURFACE.
25
Boat & Rib Care
BOAT MAINTENANCE
HYPALON EMERGENCY BOAT REPAIR KIT
PVC EMERGENCY BOAT REPAIR KIT
Contains: 70ml tube of Hypalon adhesive,
35 x 15cm of Hypalon material, abrasive
paper and instructions.
Please Note:- For a permanent repair,
Polymarine 2 part adhesive must be used.
Colour
Black
Blue
Grey
Light Grey
Orange
Red
White
Yellow
Part No.
5-81000
5-81001
5-81002
5-81003
5-81004
5-81005
5-81006
5-81007
Colour
Black
Grey
Orange
Red
White
Part No.
5-81020
5-81022
5-81024
5-81025
5-81026
Please Note:- For a permanent repair, Polymarine 2 part adhesive must be used.
P510 HYPALON SOLVENT PRIMER
2903 PVC SOLVENT PRIMER & CLEANER
• For degreasing hypalon surfaces
before adhering and cleaning
brushes.
• Suitable for reactivating applied
adhesive
500ml Part No. 5-81120
• A primer to degrease and prepare
PVC surfaces before adhering
• Suitable for reactivating applied
adhesive and cleaning brushes
500ml Part No. 5-81125
FLEXITHANE HYPALON PAINT
SUPERFLEX PVC PAINT
A fully flexible paint formulated for Hypalon PU and
rubber variant fabric
• Smooth satin finish, will not crack or flake off
• No mixing required, apply with a brush or gloss
roller, touch dry in 30 minutes. Can be sprayed
• Two coats for best results
• Used for resealing and preventing rubbing strake
and mouldings from powdering
Colour
• Coverage 3 sq m per 500ml
Black
WARNING - Flexithane must not
Blue
be used on any PVC coated
Grey
fabric surface.
Orange
Red
For paint colours see page 27
White
A fully flexible paint formulated for renovating PVC
and any other PVC variant fabric
roller, touch dry in one hour
• Seawater and sunlight resistant
• Many uses including hatch covers, PVC fenders,
boatcovers, dodgers etc.
Colour
• Coverage 2.5 sq m per 500ml
Black
Blue
Grey
Orange
Red
White
Yellow
Midnight Blue
Size
500ml
500ml
500ml
500ml
500ml
500ml
Part No.
5-81210
5-81211
5-81212
5-81214
5-81215
5-81216
LIQUID LETTERS HYPALON LETTERING PAINT
A fully flexible paint formulated for Hypalon PU and
rubber variant fabric
roller, touch dry in 30 minutes. Can be sprayed
• Two coats for best results
• Used for resealing and preventing rubbing strake
and mouldings from powdering
Colour
WARNING - Must not be used on
Black
any PVC coated fabric surface.
Blue
Grey
Orange
Red
White
26
Contains: 70ml tube of PVC
adhesive, 35 x 15cm of PVC
material and instructions.
Size
500ml
500ml
500ml
500ml
500ml
500ml
500ml
500ml
Part No.
5-81230
5-81231
5-81232
5-81234
5-81235
5-81236
5-81237
5-81238
LETTERFLEX PVC LETTERING PAINT
Size
125ml
125ml
125ml
125ml
125ml
125ml
Part No.
5-81200
5-81201
5-81202
5-81204
5-81205
5-81206
Tin
A fully flexible paint formulated for
Colour
renovating PVC and any other PVC
variant fabric
Black
Blue
• Smooth satin finish, will not crack or
Orange
flake off
• No mixing required, apply with brush Red
White
or gloss roller, touch dry in 1 hour
Yellow
• Seawater and sunlight resistant
Aerosol
• Many uses including hatch covers,
Colour
PVC fenders, boatcovers,
Orange
dodgers etc.
Red
• Can be used with our cut stencils
White
!
Size
125ml
125ml
125ml
125ml
125ml
125ml
Part No.
5-81220
5-81221
5-81224
5-81225
5-81226
5-81227
Size
150ml
150ml
150ml
Part No.
5-81244
5-81245
5-81246
DO NOT USE HYPALON PRODUCTS ON ANY
PVC COATED FABRIC SURFACE.
Boat & Rib Care
BOAT MAINTENANCE
SP54 HYPALON ANTIFOUL
SP54 PVC ANTIFOUL
Fully flexible antifoul for use on Hypalon
material. Can also be used on non-flexible
surfaces such as GRP.
• Hull and tubes can be protected on your RiB
with just one product.
• Developed using unique pseudo-organic
technology
• Extensively tested - keeps virtually Colour
Black
all hulls free from growth of algae,
Blue
crustaceans and othe unwelcome
Grey
marine life
Orange
• Includes copper
White
A fully flexible antifoul for use on PVC
material. Can also be used on non-flexible
surfaces such as GRP.
• Hull and tubes can be protected on your RiB
with just one product.
• Developed using unique pseudo-organic
technology
• Extensively tested - keeps virtually Colour
all hulls free from growth of algae,
Black
crustaceans and othe unwelcome
Grey
marine life
Red
• Includes copper
White
Polymarine Paint Colours
Black
Blue
Size
1 Litre
1 Litre
1 Litre
1 Litre
1 Litre
Part No.
5-81270
5-81271
5-81272
5-81274
5-81276
Size
1 Litre
1 Litre
1 Litre
1 Litre
Part No.
5-81280
5-81282
5-81285
5-81286
The printing processes used in producing the colour charts do not allow exact colour
reproduction and we recommend that you should check for accuracy before applying.
Grey
Orange
Red
AQUA STOP
Flexible Repair Sealant & Adhesive
Waterproof permanent repair to coated
fabrics, PVC, PU, neoprene, rubber, leather,
most plastics and fabrics Vinyl, Fibreglass,
Glass, Wood, Metal, etc
35ml Part No. 5-81307
Protect your electrical
equipment from
water/moisture ingress
• Formulated to protect all low
voltage equipment
eg. VHF radios,
GPS, etc.
• One application
provides
permanent
protection
Removes rust stains, organic stains, algae
stains from fibre glass.
• Easy to use, non abrasive gel
• For those difficult to remove yellow and rust
stains on GRP
500ml Part No. 5-81300
INFLATABLE BOAT
CLEANER
An easy to use cleaner specifically
formulated for use on inflatable boats
• Suitable for both PVC and
Hypalon fabrics
• Removes dirt, white oxidation,
grease, oil and petrol deposits
• Biodegradable
500ml Part No. 5-81310
RIB VALETING KIT
Supplied in a draw string PVC bag with blue
fabric top, comes complete with two Inflatable
Boat Cleaners, one Inflatable Boat Finish, one
GRP Silicon Free Polish, two Polishing Cloths,
one Sponge, one Trigger Spray and a pair of
disposable gloves.
Everything that you need to keep your Rib
looking good.
Part No. 5-81320
Yellow
Midnight Blue
SEALFLEX SEALANT
SURE SEAL EXTRA
DISPEL STAIN & RUST REMOVER
White
200ml Aerosol
Part No. 5-81302
Flexible waterbased acrylic latex sealant used internally
for sealing porosity and minor leaks in Hypalon & PVC
inflatables
• Sealflex is introduced into the
inflatable through the valve, which is
then inflated and tumbled to circulate
the sealant which adheres & cures to
form an impermeable membrane
• Suitable for painting on the inside of
seams during manufacture
• Sufficient for an 8-9ft inflatable
• Improved formula flows & seals the
tube more efficiently
500ml Part No. 5-81305
INFLATABLE BOAT FINISH
A finishing product specifically for use on
inflatable boats
• Suitable for both PVC & Hypalon fabrics
• Easy to apply with a soft cloth, no
polishing required, dries to a
pleasant sheen
• Helps to prevent resoiling
• Contains no silicones or distillates
250ml Part No. 5-81314
INFLATABLE BOAT GRP
SILICON FREE POLISH
• Wipe on – Polish – Wipe off
• Gently buffs and polishes to a
brilliant shine without scratching
• Totally safe on all marine
materials
• Silicon Free formulation
250ml Part No. 5-81316
FLUSH FIT VALVES
• Acetal flush fitting complete inflate/deflate valve
• Mechanically fitted into hole 38mm dia. with
reinforcing fabric doubler required depending
No Handle
Pull Handle
on pressure.
• Servicing is kept to a minimum.
Colour Pull Handle Part No.
• Overall Dia: 65mm
Black
No
5-81150
• Height: 43mm
Grey
No
5-81151
• Baynet fit cap.
Black
Yes
5-81152
• Push and turn core to deflate
Grey
Yes
5-81153
27
International Boat
Care Products
BOAT MAINTENANCE
UV WAX SEALER
NEW Boat Care products from
SUPER CLEANER
• High Strength Formula
• Removes dirt, oil, wax and grease
• Low odour
• Cleans and degrease without
damaging gelcoat or paint
• Does not leave any residue
• Biodegradable
• Leaves GRP and painted surfaces
ready to be restored
Part No. 5-60950 (500ml)
BOAT SHAMPOO
• Mild universal cleaner useful for
cleaning throughout the boating
season but won’t damage wax
protection
• Hydrophobic – repels water
• Free from silicon oils
• Mixable with sea water & fresh water
• Biodegradable
Part No. 5-60951 (500ml)
STAIN REMOVER
• High-strength GRP cleaning gel
• Easy to use
• Penetrating gel quickly dissolves
stains and marks on GRP areas like
waterline or exhaust pipe stains
• Removes surface rust on metal
and gelcoat
• Contains surfactant that dissolves oil
and proteins
• Does not damage adjacent surfaces
• Will not run on vertical surfaces
• No abrasives
• No scrubbing required
Part No. 5-60952 (500ml)
LIQUID RUBBING
• Coarse grain size – suitable for
painted surfaces and GRP in
poor condition
• Safely removes marks and
yellowing, and restores gloss
• Restore the gelcoat’s original lustre
• May be used in direct sunshine
• Does no contain wax & silicone oils
• Manual or machine use
(800-1000 rpm)
Part No. 5-60953 (500ml)
MARINE POLISH
• Fine graded liquid polish for a high
gloss, smooth, reflective surface
• Contains no silicon oils
• Mild odour
(800-1000 rpm)
Part No. 5-60954 (500ml)
MARINE WAX
• Protective wax for GRP and
paintwork
• Provides excellent protection for
polished surfaces
• No abrasives or silicon oils
• Easy to work & apply on large areas
(800-1000 rpm)
Part No. 5-60955 (500ml)
POLISH AND WAX
• All in one medium grade polish and
wax formula
• A quick and easy solution which
saves time and effort
• Contains a protective wax for
long-lasting gloss
• Safe for use on gelcoat and
painted surfaces
(800-1000 rpm)
Part No. 5-60956 (500ml)
• UV absorbing reactive wax, sealing
the surface for ultimate gloss
protection
• Protects polished surfaces against
the elements, dirt and oil
• Hydrophobic – repels water. Also
repels oil and dirt
• Easy to use
• Excellent UV protection
(800-1000 rpm)
Part No. 5-60957 (500ml)
TEAK RESTORER
• Cleans, restores and brightens teak
and other hardwoods back to their
original colour
• Does not damage GRP, varnish,
paintwork or aluminium
• Can be used in conjunction with
seawater or freshwater
• For use on any teak or hardwood
Part No. 5-60958 (500ml)
TEAK OIL
• Penetrating hardwood oil which
protects and enhances the natural
beauty of teak
• Contains a rust inhibitor for
metal surfaces
• Penetrates even moist wood
• Produces a protective and
easy-clean surface
• For use on any teak or hardwood
Part No. 5-60959 (500ml)
INTERNATIONAL MARINEFILM
Instant Scratch Repair for Gelcoat & Paint
Minor scratches are practically unavoidable. Yet we all know how much even the
smallest scratch can be annoying. That's why MarineFilm puts a unique smart and
easy do-it-yourself solution into the hands of all
boat owners. Coated with high quality paint, it
covers minor scratches with an ultra-thin
adhesive film, instantly covering unsightly
scratches in gelcoat or paint above the waterline.
MarineFilm is easy to apply and offered in the
twelve most popular gelcoat and International
Paint topside paint colours. It’s cost-effective, kind
to the environment and it provides strong season
long adhesion whilst being easily removable
when the boat is next hauled where it can be
permanently repaired.
28
• Easy to apply, meaning a pleasing finish can be achieved quickly and
unsightly scratches can be hidden instantly and without fuss
• Avoids the need for clean up and personal
Part No. Description
protective equipment during application
5-60970 White 011
• Easy to match popular marine gelcoats
5-60971 White 012
and paints
5-60972 White 013
• Provides a season long temporary repair
5-60973 White 014
that enables the aesthetics of the topside to
5-60974 White 015
be maintained until the boat is next hauled
5-60975 Black 111
• No hassle removing when time to
5-60976 Blue 211
permanently repair.
5-60977 Blue 212
• Ready to use right out of the package
5-60978 Blue 213
• Two pre-cut shapes
5-60979 Blue 214
• Custom fit to size of repair
5-60980 Green 311
5-60981
Red 411
International Paints &
Cuprinol Bilgex
BOAT MAINTENANCE
FOR PR0FESSIONAL USE ONLY
MICRON WA PREMIUM ANTIFOULING
Contains unique water activated matrix technology,
combining powerful performance with very low VOC1
Unique to International Paint, Micron WA has been developed using novel paint technology - Water
Activated Matrix - which provides outstanding protection against all types of fouling in all types of water,
including high-challenge areas, for up to 24 months.*
• Longer in-service periods improve flexibility of maintenance schedules
• Once activated, Water Activated Matrix technology delivers a crisp, vibrant colour and uniform
appearance to provide a striking, attractive finish.
• It also helps to reduce environmental impact by having optimised copper levels, using fewer natural
resources and minimising the amount of VOCs emitted to the
Practical Coverage (m²/Lt): 3.66 (Airless Spray),
atmosphere that form ground level ozone (smog) which is
8.3 (Brush/Roller)
harmful to humans, animals, vegetation and marine life.
No. of coats: 2 - 3
• The extremely low VOC (~5 g/l) also helps with local VOC
Substrates: GRP, Lead, Steel, Wood, Cast Iron
regulation compliance.
Application: Brush, Roller, Airless Spray
• For all suitably primed substrates except aluminium
Rated “Outstanding” on high fouling areas.
• One pack product in a 5 Litre tin
Colour Pre-Immersion
Colour Post-Immersion
* Depends on the total DFT (dry film thickness) applied.
For 24 months performance, a total dry film thickness of
120µm (microns) needs to be achieved. Extra coats are
needed if vessels are expected to operate at speeds in
excess of 15 knots for extended periods.
Black
Blue
Navy
Water Activated Matrix Technology
The unique Water Activated Matrix consists of a densely packed, structured arrangement of
biocides, colouring pigment and voids. The antifouling appears matt when first applied, with colour
variations or unevenness caused by different rates of water evaporation. However, on immersion,
water enters the voids and filters through the matrix, saturating the pigments and developing the
bright, crisp colour of the paint whilst, at the same time, efficiently releasing the active ingredients
to deliver powerful antifouling performance.
Patent Pending
Colour
Black
Blue
Navy
Red
Dover White
Red
Part No.
5-60094
5-60095
5-60096
5-60097
5-60098
Dover White
The printing processes used in
producing the colour charts do not allow
exact colour reproduction and we
recommend that you should check for
accuracy before applying. International
Paints colour charts are available.
Micron WA - Outstanding Multi Season Protection*
• Haul, wash and re-launch without re-painting
every season
• Extended in-service periods so owners and
captains save money by the boat remaining in
the water for longer
• Improved flexibility of maintenance schedules
with the option to apply more coats for more
than 24 months performance
A panel test conducted in Malaga, Spain
examined five different antifouling paints.
Sample 3 with Micron WA shows very little slime
after immersion for 26 months, in comparison to
many of the others which display a significantly
higher level of slime and fouling.
CUPRINOL BILGEX
Clears Grease, Scum & Oil
• Emulsifies petrol, oil and grease in the bilge
• Removes grease, scum and floating oil with
the normal movement of the boat
• Biodegradable
• Highly concentrated - a little goes a long way
• Gets rid of bad smells
• Non-caustic; harmless to paintwork and
fittings when diluted
INTERNATIONAL
INTERTUF 203
A one pack, tar free vinyl
anticorrosive which can
be used at temperatures
down to -5°C (23°F).
20 Litre tin.
Part No. 5-60893
1 Litre Bottle Part No. 5-27030
5 Litre Bottle Part No. 5-27031
DELIVERY
Please contact your nearest
Aquafax depot for carriage details.
29
ProLoc Sealants
& Adhesives
BOAT MAINTENANCE
NEW RANGE
PROLOC MARINE 100% SILICONE SEALANT 200
Application Areas:
General sealing and filling
applications in both interior
and exterior.
Instructions:
Surfaces must be clean, dry and free from dust
and grease.
A neutral cure, high performance silicone sealant designed for gap filling and sealing
applications in marine constructions. It combines outstanding adhesion to various
surfaces with non-corrosive and odourless curring mechanism.
• 100% silicone
• Solvent free
• Anti-mould
• Excellent primerless adhesion to numerous porous and
non-porous substrates including: glass, painted metal,
fibreglass, non-oily woods, plastics and abraided rubber
• Non-corrosive: does not react with or corrode
common construction materials
• Excellent resistance to marine environment
• Resistant to temperature extremes (-60 °C and +180 °C)
• Fast curing
• High elasticity
PROLOC MARINE SEALANT 246
A one component, polyurethane based marine
sealant and adhesive that bonds extremely well
to all common materials used in marine
construction.
• Excellent adhesion and sealing capacity
• Fast cure
• High elasticity
• Thixotropic: excellent performance in
vertical surfaces
• Resists salt water
• Paintable
• Sandable
PROLOC MARINE LIQUID NAIL 244
A one component polyurethane based fast and strong
adhesive especially designed to meet the standards of
the marine industry.
• Excellent bonding without screw or nail
• Suitable for both interior and exterior applications
• Suitable for almost all kind of construction materials
• Applicable even in wet surfaces
• Tixotropic; excellent performance in vertical surfaces
• D4 according to DIN EN 204
• Paintable
• Sandable
• Solvent free
PROLOC MARINE HEAVY DUTY ADHESIVE 247
A one component high viscosity polyurethane adhesive especially
designed to meet the standards of the marine industry. Unlike common
polyurethane wood adhesives, it does not foam up uncontrollably.
• Low foaming
• High adhesion strength
• Long open time: gives sufficient working time.
• Sea water and fresh water resistant
• Excellent resistance to aging and marine environment
• Fire rated
• D4 according to DIN EN 204
• Solvent free
• Sandable & paintable
30
Colour
Black
White
Grey
Clear
White
Clear
Size
310ml
310ml
310ml
310ml
50ml
50ml
Box Qty
24
24
24
24
24
24
Part No.
5-70317
5-70318
5-70319
5-70320
5-70321
5-70322
For single cartridges add /1 to part no. e.g 5-73017/1.
Application Areas:
Multipurpose marine grade sealant and adhesive suitable for making
permanently elastic, vibration resistant joint seals. It can be used for almost all
common surfaces; both interior and exterior sealing and bonding applications
in marine construction and maintenance industries.
Instructions:
Recommended application temperature is between +5 °C and +40 °C.
Surfaces must be dry, clean and free from dust and grease.
Colour
Black
White
Grey
Size
310ml
310ml
310ml
Box Qty
24
24
24
Part No.
5-70306
5-70307
5-70308
Single Part No.
5-70306/1
5-70307/1
5-70308/1
Application Areas:
Perfect formulation for all bonding applications where a permanent strong bond is
required between porous to porous and porous to non-porous surfaces in both
OEM and aftermarket. It can be used various kind of construction materials such
as wood, MDF, cement, metal, marble, granite, ceramic, rubber ant etc.
Instructions:
Recommended application temperature is between +5 °C and +40 °C. Surfaces
must be clean and free from dust and grease. Apply the adhesive to one or both
surfaces and join the parts within 5 minutes. Press the surfaces at least 15
minutes if needed.
Colour
Clear
Size
310ml
Box Qty
24
Part No.
5-70316
Single Part No.
5-70316/1
Application Areas:
Suitable for interior and exterior bonding applications of wood and
wood based materials, metals, natural stones, ceramic, rubber etc.
Instructions:
Surfaces must be clean, dry and free from dust and grease. One of
the substrates must be porous to ensure better curing. Application
quantity is 100-300 g/m2. Apply the adhesive with a brush as thin
film to one or both surfaces and join the parts within 20 minutes.
Press the elements together – if needed - at least 2-3 hours.
Colour
Beige
Size
800g
Box Qty
12
Part No.
5-70329
Single P/No.
5-70329/1
ProLoc Adhesives,
Glazing & Deck Caulking
BOAT MAINTENANCE
PROLOC MARINE GLAZING ADHESIVE 245
A one component, MS Polymer based marine structural adhesive
especially designed for marine constructions.
• Very high final adhesion strength
• Excellent elasticity
• Excellent shock absorbing and vibration
damping properties
• Withstand high dynamic stresses
• No shrinkage
• Paintable
• Primerless application possible
A one component, polyurethane based direct glazing adhesive
designed for use on all types of mineral glass windows.
Application Areas:
Structural joints in marine constructions are subject to high
dynamic stresses. It is suitable to use on wood, metal,
ceramic, plastic and etc.
Instructions:
Recommended application temperature is between +5 °C
and +35 °C. Surfaces must be clean, dry and free from
dust and grease.
Application Areas:
Direct glazing applications in both OEM & marine
repair market.
Instructions:
Recommended application temperature is between
+10 °C and +35 °C. Surfaces must be clean, dry and
free from dust and grease.
Colour
White
Size
290ml
Box Qty
24
Part No.
5-70302
Single Part No.
5-70302/1
• High initial bonding strength
• Fast cure
• Excellent non-sag properties
• High mechanical performance
• Resistant to aging and marine environment
• Paintable
• Primerless application possible (for best results primer
use recommended)
Colour
Black
Size
300ml
Box Qty
24
Part No.
5-70312
Single Part No.
5-70312/1
PROLOC MARINE UV GLAZING ADHESIVE 235
PROLOC MARINE DECK CAULK 291
A one component polyurethane based direct glazing adhesive designed
for use on acrylic and polycarbonate based windows.
A one component MS Polymer based joint sealing compound especially
designed for caulking in traditional timber decking.
• High initial bonding strength
• UV resistant
• Fast cure
• Excellent non-sag properties
• High mechanical performance
• Resistant to aging and marine environment
• Paintable
• Primerless application possible (for best result primer
use is recommended)
• Excellent adhesion capacity
• High UV resistance
• Excellent resistance to aging & marine environment
• High elasticity
• Paintable
• Sandable
• Resistance to sea water and fresh water
• Isocyanate free
• Solvent free
Application Areas:
Direct glazing applications in both OEM and marine
repair market.
Instructions:
Application Areas:
Joint caulking applications of traditional timber
decking in marine constructions.
Instructions:
Colour
Black
Size
300ml
Box Qty
24
Part No.
5-70314
Single Part No.
5-70314/1
PROLOC MARINE PR102 GLAZING PRIMER
PR102 is a polyurethane based solvent containing primer
designed for pre-treating plastic substrates prior to bonding
with polyurethane elastic adhesives.
• Liquid
• Resistance against water
Size
250ml
Qty
Each
Part No.
5-70337
NEW RANGE
PROLOC MARINE STRUCTURAL ADHESIVE 242
Colour
Black
Size
290ml
Box Qty
24
Part No.
5-70300
Single Part No.
5-70300/1
Application Areas:
Suitable for plastic surfaces such as Acrylic (PMMA),
polycarbonate and surfaces painted with acrylics,
alkyd/melamin.
Instructions:
dust and grease.
31
ProLoc Deck Bedding,
Foams & Gasket Maker
NEW RANGE
BOAT MAINTENANCE
PROLOC MARINE BEDDING ADHESIVE 248
PROLOC MARINE PU FOAM 215 (HAND)
A one-component polyurethane adhesive that cures on
exposure to atmospheric humidity to form a strong and
elastic elastomer. It is specially designed for bonding
deck covering materials.
A single component, moisture curing, self expanding,
hand grade, polyurethane foam especially designed
for requirements of the marine industry.
• Permanently flexible
• Slightly thixotropic
• Easy to apply
• Long open time
• Sound deadening
• Paintable
• Weather resistant
• Sandable
• Cushioning effect absorbing shocks
Application Areas:
Flexible bonding of timber strip decking, deck planking, plastic deck
coverings and prefabricated timber deck panels.
Instructions:
Recommended application temperature is between +10 °C and +35 °C.
Surfaces must be clean, dry and free from dust and grease.
Colour
Black
Size
310ml
Box Qty
24
Part No.
5-70304
Single Part No.
5-70304/1
Application Areas:
215 is an alternative fire resistant filling material to fill large gaps in marine
construction activities that requires sound, air and vibration insulation.
Instructions:
Surfaces must be clean and free from dust and grease. Shake the can well
before use. Hold the can upside down and activate the foam by pressing the
valve. Moistening the surfaces before and after the application ensures faster
curing and increase the bonding strength.
Colour
–
Size
750ml
Box Qty
12
Part No.
5-70331
Single Part No.
5-70331/1
PROLOC MARINE PU FOAM 216 (GUN)
PROLOC MARINE GASKET MAKER 300
A single component, moisture curing, self expanding,
gun grade, polyurethane foam especially designed for
requirements of the marine industry.
A one component, high performance, 100%
RTV silicone sealant designed for marine
maintenance and repair applications where
heat resistance is required.
• Suitable for common construction materials
(except Teflon,PP,PE)
• Low expanding property
• Excellent adhesion and filling properties
• Conforms to fire class B1 according to DIN 4102
• Ozone friendly
• Can be cut and trimmed after cured
• Paintable
Application Areas:
216 is an alternative fire resistant filling material to fill narrow and linear gaps
in marine construction activities that requires sound, air & vibration insulation.
Instructions:
Surfaces must be clean and free from dust and grease. Shake the can well
before use. Hold the can upside down and activate the foam by pressing the
trigger of gun. Moistening the surfaces before and after the application
ensures faster curing and increase the bonding strength.
Colour
–
Size
750ml
Box Qty
12
Part No.
5-70332
Single Part No.
5-70332/1
PROLOC MARINE LINE PR101 DECKING PRIMER
PR101 is a polyurethane based solvent containing primer designed
for pre-treating timber decking strips before caulking.
• Liquid • Transparent
• Resistance against water
Size
250ml
32
• Suitable for common construction materials
(except Teflon, PP, PE)
• High expanding capacity
• Excellent adhesion and filling properties
• Conforms to fire class B1 according to DIN 4102
• Ozone friendly
• Can be cut and trimmed after cured
• Paintable
Qty
Each
Part No.
5-70336
• Acetoxy cure
• 100% silicone
• Fast cure
• High strength
• Resists to mechanical enforcement after curing
• Remains flexible between -40 °C and +250 °C
• Will not crack, shrink or become brittle
Application Areas:
Sealing and bonding applications of marine maintenance
and repairs where heat resistance is required.
Instructions:
Recommended application temperature is between +5 and +40 °C.
Surfaces must be clean, dry and free from dust and grease.
Colour
Black
Red
Size
50g
50g
Box Qty
24
24
Part No.
5-70323
5-70324
Single Part No.
5-70323/1
5-70324/1
Application Areas:
For priming wooden deck parts such as Teak, Mahogany,
Oregon Pine, Cork, GRP and etc.
Instructions:
dust and grease.
ProLoc Sealants
& Adhesives
BOAT MAINTENANCE
NEW RANGE
PROLOC MARINE A40 MAGIC CORROSION INHIBITOR
A40 MAGIC is an corrosion inhibitor, lubricant and multi purpose protector aerosol spray. With it’s special formula it combines many
properties such as cleaning, lubricating, loosening rusted part, driving out moisture. It can be used in industrial, home and daily labors.
• Ultimate penetrating ability
• Loosens rusted or corroded bolts, nuts, cables and any other fasteners
• Greases and loosens door and window hinges, locks, and other fittings
• Decreases frictions and stops squeaks of pedals, chairs, windows, faucets
and hinges
• Does not contain silicone and any dirty trap additives
• Penetrates into water, drives it out of surface and dries it fast, thus provides
longtime corrosion inhibiting effect
• Protects metal parts against rust
• Provides maintenance by penetrating into surface and protects it against dirt
• Dissolves tar, gum, adhesive and etc
• Permeates into grease and dirt and creates a protective film layer on
the surface
• Long lasting polishing effect.
PROLOC MARINE SILICONE LUBRICANT 280
A silicone based lubricant and mold separator used in plastic, natural
rubbers, rubber, metal as well as in many industrial applications.
• Excellent protection capacity
• Highly water resistant
• Eliminates squeaking, binding and sticking
• Excellent release properties
• Effective over a wide range temperature (-40 °C and +200 °C)
• Does not leave any sediment on hot surfaces
Application Areas:
A40 has lots of applications. In all fittings, door and window
mechanisms, locks, handles, hinges. It removes water on
metallic surfaces of bikes, motorbikes, small motor
vehicles, electronic contacts and other home tools such as
drills, jigsaws, etc.
Also for loosening of rusted and jammed mechanisms, can
be used as protective agent on surfaces vulnerable to
water and rust, and for dissolving adhesive materials like
tar, gum, adhesive tapes etc.
Size
200ml
400ml
Box Qty
24
24
Part No.
5-70339
5-70340
Single Part No.
5-70339/1
5-70340/1
Application Areas:
Prevention of hardening and freezing of rubber seals.
Prevents plastic assemblies from squeaking and binding.
Provides excellent lubrication properties on surfaces.
It can be used as a release agent in the molding of plastic
and rubber parts.
Size
400ml
Box Qty
12
Part No.
5-70333
Single Part No.
5-70333/1
APPLICATION GUNS
PROLOC MARINE CARTRIDGE GUN
Fits standard sealant cartridges.
Part No. 5-70341 (each)
PROLOC MARINE FOAM GUN
Fits PU Foam 216 (5-70332).
PROLOC MARINE MULTI GUN
Fits standard sealant
cartridges and bulk.
PROLOC MARINE TEFLON FOAM GUN (HD)
Fits PU Foam 216 (5-70332).
33
Loctite Sealants
& Adhesives
BOAT MAINTENANCE
LOCTITE 243 LOCK ‘N SEAL 24ml
LOCTITE 270 STUD ‘N BEARING FIT 24ml
Loctite 243 medium strength threadlocker, suitable for all metal threaded
assemblies. Breakaway torque 26Nm.
• Works on all metals, including passive substrates (e.g. stainless steel,
aluminium, plated surfaces)
• Proven to tolerate slight contaminations of industrial oils, e.g. engine
oils, corrosion prevention oils and cutting fluids
• Prevents loosening on vibrating parts, e.g. pumps, gear boxes or presses
• Permits disassembly with hand tools for servicing
• P1 NSF Reg. No.: 123000
Loctite 270 High Strength, general purpose threadlocker.
Breakaway torque 33Nm.
• Suitable for all metal fasteners, including stainless steel, aluminium,
plated surfaces and chrome-free coatings
• Tolerates slight contaminations of industrial oils, e.g. engine oils,
corrosion prevention oils, cutting fluids
• Ideal for permanently locking studs on engine blocks and pump housings
• To be used if regular removal for maintenance is not required
• P1 NSF Reg. No.: 123006
Part No. 5-21141 (Qty 12)
Part No. 5-21141/1 (Single)
Part No. 5-21142 (Qty 12)
Specification
Maximum thread size:
Strength:
Breakaway torque:
Fixture time steel:
Fixture time brass:
Fixture time stainless steel:
Service temperature range:
M36
Medium
M10 bolts: 26 Nm
10 min.
5 min.
10 min.
-55 °C to +180 °C
Specification
Strength:
Breakaway torque:
Fixture time steel:
Fixture time brass:
Up to M20
High
M10 bolts: 33 Nm
10 min.
10 min.
150 min.
-55 °C to +180 °C
LOCTITE 55 PIPE SEALING CORD 50m Pot
LOCTITE 2701 THREADLOCKER 50ml
Loctite 2701 High strength threadlocker, especially for
chromated surfaces
Part No. 5-21144 (Single)
Specification
Strength:
Breakaway torque:
Fixture time steel:
Fixture time brass:
Up to M20
High
M10 bolts: 38 Nm
10 min.
4 min.
25 min.
-55 °C to +150 °C
Specification
Maximum pipe size:
Disassembly strength:
Breakaway torque:
4"
Low
-55°C - +149°C
n.a.
LOCTITE SI 5980 QUICK GASKET
LOCTITE SI 5990 QUICK GASKET
40ml General Purpose Flange Sealant
40ml High Temperature Flange Sealant
Premium high performance silicone black for flanges exposed to
permanent oil contact.
• Excellent oil resistance
• For all kind of flanges including metals and
plastics as well as combinations of both
• Can replace pre-cut paper or cork gaskets
• High flexible gasket maker
• Non-corrosive
• Health & Safety friendly
Premium high performance silicone copper for flanges exposed to high
temperatures (up to 300ºC).
• Excellent temperature resistance
• For all kind of flanges including metals and
plastics as well as combinations of both
• Can replace pre-cut paper or cork gaskets
• Non corrosive
• Health & Safety friendly
Part No. 5-21162 (Qty 12)
Part No. 5-21160 (Qty 12)
Specification
Colour:
Tack free time:
Tensile strength:
34
Loctite 55 pipe & threadsealing cord.
• General purpose, threaded pipe and fitting sealant
• Non curing, immediate, full pressure seal
• For a quick, easy and reliable seal
• WRC listed, meets BS 6920 for potable water: 0808533
• DVGW/KTW approval for gas and potable water
• Tested in accordance with EN 751-2 Class ARp and DIN 30660
• Certified to NSF/ANSI, Standard 61
Part No. 5-21155 (Qty 24)
Black
30 min.
1.6 N/mm²
-55°C to 250°C
Specification
Colour:
Tack free time:
Tensile strength:
Copper
40 min.
1.9 N/mm²
-60°C to 350°C
Sealants & Adhesives
(Various)
BOAT MAINTENANCE
LOCTITE SI 5926 INSTANT GASKET
LOCTITE 574 MULTI GASKET
40ml Multi purpose flexible silicone sealant.
50ml general purpose sealant for
machined, rigid metal flanges.
For flexible flanges, machined or casted surfaces. Can be used on metal,
plastic and painted parts. Resists vibration, thermal expansion and
contraction
Part No. 5-21166 (Qty 12)
Specification
Colour:
Max. gap:
Skin over time:
Cure through volume in 24 h:
Strength:
Cure method:
Ideal for use on rigid metal parts, e.g. cast iron
components and pump housings
Specification
Colour:
Tensile shear strength:
Max. gap:
Fixture time steel:
Fixture time aluminium:
Strength:
Cure method:
Blue
-60°C - +200°C
1mm
60 min.
2.5 mm
Low
Moisture (Silicone)
Orange
-50°C - +150°C
8.5N/mm²
0.25mm
15 min.
45 min.
Medium
Anaerobic
LOCTITE 3463 MAGIC METAL STEEL STICK 114g
Metal-filled Compounds, 2K Epoxy.
Sets in 10 minutes. Steel filled kneadable
stick. Adheres to damp surfaces and cures
under water. Chemical and corrosion
resistant. Can be drilled, filed and painted.
• Emergency sealing of leaks in
pipes and tanks
• Smoothes welds
• Repairs small cracks in castings
Specification
Working life:
Fixture time:
Shear strength (GBMS):
Compressive strength:
GEOCEL® TRADE MATE
SILICONE PLUMBA FLUE
High Temperature
Silicone Sealant
CAPTAIN TOLLEY'S
CREEPING CRACK CURE
• One part water based acrylic co-polymer
penetrating sealant
• Seals hairline cracks by capillary action 24 hour
curing time providing a clear, flexible and
paintable seal
• Can be used on wood, glass, rubber, metals,
perspex, ceramic, fibreglass, polystyrene and
some plastics
• For use around the home, boat, caravan,
motorhome or car
Size
60ml
60ml
250ml
250ml
Qty
12
Each
12
Each
Part No.
5-70100
5-70100/1
5-70101
5-70101/1
A one component, high
temperature acetoxy silicone
sealant suitable for use on nonporous surfaces and ideal for
sealing gas flues.
Once cured, Trade Mate Plumba
Flue is able to withstand
temperatures of up to 300ºC for
short term exposure and 250ºC
for long term exposure.
Suitable for sealing gas flue and
chimney terminals.
3 min.
10 min.
>6 N/mm²
82.7 N/mm²
-30 °C to +120 °C
See Section 5 for
Paints, Sealants
& Consumables
Bulk Pack: 12 x 310ml cartridges
(Black): Part No. 5-70031
Single: 310ml cartridge (Black):
Part No. 5-70031/1
FARÉCLA SPURRING BRUSH
Spurring brush for manually cleaning excess
compound from a pad.
Part No. 5-21460
35
Quicksilver Oils
& Lubricants
OILS & LUBRICANTS
PREMIUM PLUS 2 STOKE TC-W3 OUTBOARD OIL
PREMIUM 2 STOKE TC-W3 OUTBOARD OIL
Specifically formulated with a marine additive package to meet the
needs of low to mid-horsepower outboard engines.
• For use in normal marine operating conditions
• Exceeds TC-W3 standards
• Reduces rust and corrosion of internal components
• Provides enhanced detergency to help keep
your engine free of deposits
• Meets all outboard and personal watercraft
manufacturers’ recommendations for use of
TC-WII and TC-W3 oils in pre-mix or
oil-injected models
Size
1 Litre
4 Litre
10 Litre
Qty
6
3
2
Part No.
5-38021
5-38022
5-38023
OPTIMAX/DFI 2 STOKE OUTBOARD OIL
Specifically formulated and developed to meet the needs of all
Direct Fuel Injected (DFI) 2-stroke outboard engines.
• Specifically formulated to meet the unique performance demands of
next generation two-stroke DFI engines
• Incorporating a synthetic, high viscosity, lubricity
additive to provide maximum scuff protection at
the high operating temperatures associated
with DFI engines
• Enhanced detergency additives
providing superior piston cleanliness to
prevent ring sticking.
• Formulated with improved rust
protection for the unique demands of
the marine environment.
Size
4 Litre
10 Litre
Part No.
5-38037
5-38038
Size
1 Litre
4 Litre
10 Litre
Qty
6
3
2
Part No.
5-38026
5-38027
5-38028
HEAVY DUTY DIESEL ENGINE OIL 15W 40
marine diesel engines.
• 15W-40 oil formulated to combat sludge and
varnish formation
• Contains a higher additive level
than standard fleet oils, providing
better protection
• Provides excellent shear stability to
assure stay-in-grade performance,
even in highly stressed applications
• Protects internal engine components
from corrosion and wear
• Provides excellent water tolerance.
Size
4 Litre
Qty
3
Part No.
5-38042
PERFORMANCE 4 STOKE OUTBOARD OIL 10W 30
STERNDRIVE & INBOARD 4 STOKE OIL 25W 40
4-stroke outboard engines.
• Developed for the rigours of the marine environment
• Field-proven to provide superior lubrication as well as
protection from corrosion and wear
• Low-temperature viscosity formula allows for easy
cold temperature starting
• Shear stable additives prevent oil degradation.
• Enhanced formula developed with heavy
duty additives
• Exceeds all 4-stroke outboard engine
manufacturers’requirements and surpasses API
service requirements for SJ, CF-2 and CH-4
Specifically formulated and developed to meet the needs of
high-output sterndrive and inboard engines.
• Multi-viscosity 25W-40 oil formulated to eliminate thermal
breakdown (no viscosity improvers necessary) under
extreme temperatures and loads
• Field-tested & proven in petrol & diesel applications
• Provides superior lubrication and protection of
internal components from corrosion, wear,
scuffing and scoring – even in higher
temperature engines
• Meets and exceeds API service requirements for
SJ, CF-2, CH-4 with a multi-functional additive
that assures “Marine Grade” oil performance.
Size
1 Litre
4 Litre
36
Qty
3
2
Specifically formulated with a higher concentration marine additive
package to meet the needs of high-horsepower outboards,
including direct fuel-injected engines.
• For use in extreme marine operating conditions
• Far exceeds Mercury in-house test standards which are
more stringent than the industry’s TC-W3® standard
• Cleanest burning-reduces carbon build-up in
exhaust system
• Reduces smoke
• Superior lubrication
• Meets all outboard and personal watercraft
manufacturers’recommendations for use of
TC-W3 oils in pre-mix or oil-injected models
Qty
6
3
Part No.
5-38045
5-38046
Size
1 Litre
4 Litre
Qty
6
3
Part No.
5-38048
5-38049
DELIVERY Please contact your
nearest Aquafax depot for shipping
details of all items on this page.
Quicksilver Oils
& Lubricants
OILS & LUBRICANTS
SYNTHETIC 2 STROKE PWC OIL
SYNTHETIC BLEND 4 STROKE OUTBOARD OIL 25W 40
Formulated specifically for unique conditions found in marine
environments, with full synthetic formula for maximum engine
protection in all brands of 2-cycle PWC’s and Sport Boats.
Specifically formulated and developed to meet the needs
of all 4-stroke outboard engines.
• Newly formulated to provide the highest level of
performance and protection available today from a
4-stroke outboard oil
• Recommended oil for use in Verado engines.
• For use in all 4-stroke engines
• First in class for all durability test properties
• Industry-leading internal marine engine
corrosion protection
• Inherently biodegradable, clean burning full synthetic
provides low smoke and smell
• Outstanding detergency keeps engine clean of
deposits and rings free, to maintain ultimate power
and performance
• Provides outstanding wear and corrosion
protection which helps extend engine life
• Minimizes performance-robbing carbon deposits
• Maintains peak engine performance and reliability,
meets or exceeds manufacturer’s warranty
requirements, (using this product will not void
manufacturer warranties)
• Exceeds JASO FD and ISO EGD
• Recommended for use in all two-stroke personal
watercraft engines, can be used in
Size
oil-injected or pre-mix applications
1 Litre
NEW
Size
1 Litre
4 Litre
Qty
6
Part No.
5-38090
SYNTHETIC BLEND 4 STROKE OUTBOARD OIL 25W 50
Qty
3
Part No.
5-38052
5-38053
SYNTHETIC BLEND 4 STROKE STERNDRIVE AND
INBOARD OIL 25W 40
Formulated for pressure charged and intercooled engines and
contains an advanced additive system that
provides unmatched performance.
• Industry leading corrosion protection
• Enhanced protection against varnish
build-up and sludge formation in critical
engine parts
• Improved lubricity benefits internal
engine parts for extended reliability
• Ideal for commercial and recreational use
• Exceeds all outboard manufacturers’
oil requirements and FC-W®
marine qualifications
Size
4 Litre
Qty
6
3
Part No.
5-38084
For more Oils & Lubricants
see Section 5 of
our Catalogue
Specifically formulated and developed to meet the
needs of all 4-stroke marine engines.
• Advanced protection not offered by
conventional automotive oils
• For use in all MerCruiser and other
sterndrive engines
• For use in all 4-stroke engines
• Superior friction and wear protection
• Industry-leading internal marine engine
corrosion protection
Size
946ml
4 Litre
Qty
6
3
Part No.
5-38055
5-38056
SYNTHETIC 4 STROKE CATALYST
STERNDRIVE & INBOARD OIL 20W 40
Formulated to provide optimum operation and
longer life for the critical engine catalyst
systems that safeguard our environment.
Catalysed marine engine use
• Extended catalytic converter life due to low
phosphorus formation
Sterndrive and Inboard use
• Three distinct synthetic base stocks provide
superior wear protection and lubrication
• Provides extreme salt water and freshwater
rust protection
• Reduced oil consumption, improved pumping ability
• A more stable, high viscosity oil that prevents dirt
and soot from settling on metal surfaces
Size
• Exceeds all outboard manufacturers’ oil
requirements & FC-W® marine qualifications 1 Litre
Qty
6
Part No.
5-38087
Quicksilver products are available as single containers, add /1 after the case part no. e.g 5-38021/1
37
Quicksilver Oils
& Lubricants
OILS & LUBRICANTS
PREMIUM GEAR OIL 80W 90
HIGH PERFORMANCE GEAR OIL SAE 90
Specifically designed and developed to meet the
needs of outboard lower units.
• Provides excellent lubrication and wear resistance
for outboard lower unit gears
• Great for both high and low horsepower
engines under varying operating conditions
• Special additives protect gears
from metal-to-metal contact
• Exclusive formulation helps
improve film adhesion to gears.
• Since no industry wide standards
exist concerning marine gear oils,
it is essential to use products such
as this which has been specifically
designed and tested for marine
Size
applications
237ml
• Do not mix with High
1 Litre
Performance Gear Oil
10 Litre
Engineered to provide maximum protection for
sterndrive and outboard lower units.
• Exclusive formula provides extended gear life in
extreme conditions including high-speed and high
horsepower applications
• Extensively tested to provide excellent
protection against corrosion and
excessive wear.
• Specifically formulated to help
prevent failures due to water
entering the gear housing.
• Extreme-pressure synthetic
additives protect gears from metal
to metal contact.
• Since no industry-wide standards exist
concerning marine gear oils, it is
Size
essential to use products such as this
237ml
which has been specifically designed
1 Litre
and tested for marine applications.
10 Litre
• Do not mix with Premium Gear Oil.
Qty
12
6
2
Part No.
5-38100
5-38102
5-38104
Qty
12
6
2
Part No.
5-38110
5-38112
5-38114
Quicksilver products are available as single containers, add /1 after the case part no. e.g 5-38021/1
QUICKARE FUEL TREATMENT OIL
Quickare is a complete fuel treatment that
can be used in all grades of gasoline,
including ethanol blends.
Use Quickare at every fill-up to:
• Maximize engine performance with all grades
of gasoline
• Help control corrosion, gum and varnish
build-up, and phase separation associated
with ethanol-blended fuel
• Help control moisture and corrosion problems
associated with non-ethanol fuel
• Clean up existing varnish and
gum deposits from fuel lines,
tanks, carburetors and injectors,
intake valves, and spark plugs
• Keep fuel fresh between fill-ups
- up to 12 months
Each 355ml bottle treats 227L
Size
355ml
Qty
12
Part No.
5-38120
The Quicksilver Fuel Care System is one complete system - specially formulated
by the people who made your engine, with decades of experience on all kinds of
engines - to help it run its best. It's as easy as 1, 2, 3 - regardless of whether you
use ethanol- or non-ethanol-blended fuels.
QUICKLEEN ENGINE & FUEL
SYSTEM CLEANER
QUICKSTOR FUEL STABILIZER
Quickleen is a deep cleaning treatment that
should be used periodically.
Aggressive cleaners work to quickly and
thoroughly remove carbon deposits from
carburetors and injectors, intake valves, spark
plugs, piston crowns and cylinder heads.
This product does not contain
fuel stabilizers.
Use with Quickare to prevent fuel
breakdown and oxidation.
Use Quickleen to:
• Prevent engine knocking and
piston seize-up
• Extend spark plug life
Add Quickstor to fuel before storing your
engine to ensure your fuel is ready to go at
the start of the next season.
Use Quickstor to:
• Prevent regular and ethanol-blended fuel
from breaking down and oxidizing
• Prevent fuel system corrosion
• Prevent gum and varnish from
forming in the fuel and settling in
fuel lines and tanks, carburetors
and injectors
• Keep injectors and carburetor
lubricated
• Stabilize fuel for up to a year
Size
355ml
Qty
12
Part No.
5-38124
Size
355ml
Qty
12
Part No.
5-38122
For more Oils & Lubricants see Section 5 of our Catalogue >
38
Quicksilver Oils
& Lubricants
OILS & LUBRICANTS
FUEL INJECTOR CLEANER
OTC® INJECT-R-KLEEN
Formulated to clean the injectors and restore
original spray pattern - which helps prevent
recurring problems, and
reduces intake and port
deposits.
Clean fuel injectors mean
cleaner running, more efficient
engines and lower emissions.
No mixing required - use right
from the can.
Size
473ml
Qty
12
POWER TUNE ENGINE CLEANER
STORAGE SEAL FOGGING OIL
For use in all 2- and 4- stroke carbureted
and fuel injected petrol engines.
Assists in restoring lost power
due to carbon, gum and varnish
deposits that accumulate in the
combustion chambers of petrol
engines, as a result of normal
engine use. Removing these
deposits helps improve fuel/air
flow and overall engine
performance.
Specially formulated compound
for all 2- and 4- stoke engines
that forms a protective barrier
against rust on internal
metal surfaces.
To be used at the end of the
season or whenever it will not
be used for more than a month.
Size
340g
Part No.
5-38126
Qty
12
Size
340g
3.78L
Part No.
5-38135
Qty
12
2
Part No.
5-38143
5-38145
HIGH PERFORMANCE EXTREME GREASE
CORROSION GUARD AEROSOL
• Calcium sulfonate-based NLGI grease
• Excellent rust and corrosion protection
• Formulated for high-temperature & high-load applications
• 100% compatible with lithium-based greases
Corrosion Guard is a rust inhibitor that forms a water
resistant barrier on non-painted and painted surfaces.
Protects outdrives, lower units and power trim motors
from rust. Remains clear and doesn’t peel.
Can also be used to prevent further paint damage in
areas where undercutting and blistering have occurred.
Do not spray on surfaces coated with antifouling or
biocide paint.
For use in the following applications: steering systems/
cable linkages, throttle and shift cables, drive shaft
splines, gimbal bearings, U-joints, suspension systems,
chassis, ball joints, and trailer wheel bearings.
Size
227g
Qty
12
Part No.
5-38141
Use Quicksilver grease
gun (P/No. 5-38171)
2-4-C MARINE LUBRICANT WITH PTFE
Quicksilver 2-4-C marine grease is a multi-purpose lubricant
that withstands extreme friction and won’t break down when
mixed with water.
Contains rust and oxidation inhibitors to prevent corrosion. Also
contains PTFE for added friction reduction and reduced wear.
Recommended uses: steering systems, cable linkages, throttle
and shift cable and linkages, remote controls, prop shafts,
swivel pins, drive shaft splines, tilt lock mechanisms, tilt tubes,
hinge pins and trailer wheel bearings.
Size
227g
3 x 85g
397g
Qty
12
10
4
Part No.
5-38150
5-38152
5-38154
Use with
Quicksilver tubes gun (5-38171)
Quicksilver cartridge gun (5-38170)
–
Size
312g
Qty
6
Part No.
5-38147
POWER TRIM &
STEERING FLUID
• For use in power trim and
steering systems
• Unique formula helps prevent
corrosion, oxidation and wear
• Suitable for high temperature
applications
Size
237ml
Qty
12
QUICKSILVER GREASE GUN
QUICKSILVER GREASE GUN
For 85g cartridge (5-38152).
Part No. 5-38170
For 227g cartridge (5-38150).
Part No. 5-38171
Part No.
5-38160
39
Quicksilver Coolants &
Shakespeare Fuel Additives
COOLANTS & FUEL ADDITIVES
EXTENDED LIFE COOLANT ANTI-FREEZE
HEAVY DUTY 9 LITRE OIL
DRAIN CAN
• Ready to use premixed 50/50 formula (deionised water)
• Ethylene glycol-based product
• Will not cause gelling and provides superior corrosion
protection
• Protects all cooling system metals including aluminium
• Silicate and Phosphate free
• Provides anti-freeze protection to -36ºC (-34ºF)
Size
3.78ml
Qty
4
Plastic oil drain can, ideal for safe and
clean oil sump drain.
Dimensions: (H x W x D) 39 x 29 x 12.5cm
Part No. 5-50760
Part No.
5-38182
MARINE ENGINE COOLANT
Low silicate formula specially recommended for four stroke
diesel and petrol engines with closed cooling systems
• Coolant additives provide protection against corrosion and
scale formation
• Ready to use premix formula requires no mixing or additives
• Low silicate formula prevents silicate gelling which can restrict
engine cooling passages and cause overheating
• Provides antifreeze protection down to -36ºC (-33ºF)
Size
5 Litre
Qty
2
Part No.
5-38185
Marine engines are subjected to some of the harshest and most demanding environments imaginable, and
recent changes in the chemical formulations of marine fuels have introduced a new level of adversity to an
already taxed service life. Shakespeare® Marine's specifically formulated marine fuel additives repair and
prevent fuel-related lost engine performance in both petrol and diesel marine engines.
ETHANOL SHIELD
FUEL ADDITIVE
REPAIR MECHANIC
IN A BOTTLE FUEL
TREATMENT
This year round fuel stabilizer
is used for 2 & 4 cycle marine
engines and treats all
gasoline blends.
This marine formula prevents
ethanol related problems. It
displaces water common in
marine engines, prevents
corrosion, provides easy
engine starting and keeps
stored fuel fresh. It also
reduces heat to extend the
life of the engine.
• Gasoline Fuel Stabilizer
• All Gasoline Blends
• Protects Entire Fuel System
• Reduces Heat
• Reduces Emissions
• Keeps Stored Fuel Fresh
Treats up to 300 Litres
Size
236.6ml (8oz)
236.6ml (8oz)
40
Qty
9
each
Part No.
5-32001
5-32001/1
DIESEL MECHANIC
IN A BOTTLE FUEL
TREATMENT
This synthetic fuel additive works
in poor or non-running marine
engines as a complete fuel
system cleaner.
Without removing the carburetor
it removes all the varnish in the
fuel system avoiding costly
repairs. It removes carbon
deposits, displaces water,
reconditions
rubber and plastic components
and revitalizes old fuel.
This ultra-concentrated diesel
fuel stabilizer is engineered
to protect your entire marine
fuel system from problems
caused by Diesel and
bio-Diesel blended fuels.
It cleans injectors and
pumps, improves lubricity,
disperses water and
removes sludge.
• Quickly Repairs Engine
• Repairs Ethanol Fuel Problems
• Restores Old Decayed Fuel
• Breaks Down Carbon Deposits
• Adds an Octane Booster
• Diesel Fuel Stabilizer
• Bio-Diesel Protection
• Keeps Entire Fuel System Clean
• Reduces Emissions
• Reduces Smoke
Size
236.6ml (8oz)
236.6ml (8oz)
Qty
9
each
Part No.
5-32004
5-32004/1
Size
236.6ml (8oz)
236.6ml (8oz)
Qty
9
each
DELIVERY
Part No.
5-32007
5-32007/1
PELA Oil Extractors
FUEL ACCESSORIES
NEW RANGE
PELA OIL EXTRACTORS
Pela oil extractors are manually operated vacuum pumps for fluid removal. The most common application is oil changing. All you need to
do is pump the unit to create a powerful vacuum. Then watch the old oil get sucked out of the engine and into the container. Our quick,
easy and clean process eliminates the need to remove drain plugs or tilt equipment - ideal for areas that are confined or inaccessible.
PELA 2000
PELA 6000
Simply pump 5 to 10 times in a row to create
a powerful vacuum, then watch the oil drain
neatly into the calibrated container.
With a capacity of 2.5 litres, it's ideal for small
4-stroke outboard engines up to 50 HP
(depending on make), sailboats with small
diesel engines (9 HP to 18 HP), and PWCs
with 4-stroke engines.
Part No. 2-74700
Simply pump 10 to 20 times in a row to create
a powerful vacuum. A sturdy, see-through
container (6.0 litres) neatly captures the oil.
The calibrated wall lets the user know how
much oil has been removed.
A pour spout is included to help emptying.
Pump is removable for easy storage.
Part No. 2-74701
Specification:
Capacity:
Height:
Container Dia.:
Tube:
Specification:
Capacity:
Height:
Container Dia.:
Tube:
2 Litres
44.5cm (17.5'') (assembled)
18cm (7'')
Probe 0.5cm (3⁄16 '') OD, Length 110cm (43'')
Clear Section: 1cm (3⁄8 '') OD, Length 100cm (39'')
6 Litres
54.6cm (21.5'') (assembled)
23cm (9'')
Probe 0.5cm (3⁄16 '') OD, Length 110cm (43'')
Clear Section 1cm (3⁄8 '') OD, Length 100cm (39'')
PELA 400
PELA 650
Requires just 4 to 15 strokes to create a
powerful vacuum.
The integrated container (4.0 litres) then
neatly captures the oil preventing messy
spills and the calibrated wall allows easy
measurement of the oil extracted.
A built-in float switch automatically stops
extraction as soon as capacity is reached
and a pour spout facilitates emptying.
This is a durable, maintenance free unit
and is ideal for professional use.
Part No. 2-74702
Our original pump, since 1996, and a long time
favourite among technicians because of its power
and durability.
Requires just 4 to 15 strokes in a row to create a
powerful vacuum. The integrated container (6.5 litres)
then neatly captures the oil preventing messy spills,
and the see-through, calibrated container lets the
user know how much oil has been extracted.
A built-in float switch automatically stops extraction as
soon as capacity is reached and a pour spout
facilitates emptying.
With the pump housed inside the container, the “Big
PELA” is a durable, maintenance free unit.
Part No. 2-74703
Specification:
Capacity:
Height:
Cylinder Dia.:
Tubes:
Extension Tube:
4 Litres
50.8cm (20'') (assembled)
16cm (6.25'')
0.5cm (3⁄16 '') & 0.6cm (1⁄4 '') OD
Length 120cm (47'') each
Length 100cm (39'')
Specification:
Capacity:
Height:
Cylinder Dia.:
Tubes: 0.5cm
Extension Tube:
PELA PRO 14
A heavy duty unit for big engines - with a 14 litre capacity,
the PELA Pro 14 is the largest on the market.
It comes with a new improved, patent pending mechanism,
and for durability, the pump unit is also housed inside the
container. Just pump 20 to 25 times in a row to create a
powerful vacuum and then watch the oil drain into the seethrough, calibrated container. An internal float switch shuts
off extraction automatically when full. Ideal in the workshop
for servicing large engines or several smaller ones before
emptying. Ideal for boats with large diesels and those with
twin engines.
Part No. 2-74704
6.5 Litres
63.5cm (25'') (assembled)
16cm (6.25'')
(3⁄16 '') & 0.6cm (1⁄4 '') OD
Length 100cm (39'')
Specification:
Capacity:
Height:
Cylinder Dia.:
Tubes: 0.5cm
Extension Tube:
14 Litres
65cm (25.5'') assembled
21.2cm (8.35'')
(3⁄16 '') & 0.6cm (1⁄4 '') OD
Length 150cm (60'')
For Oils & Lubricants see
Section 5 of our Catalogue
41
Fuel-Guard™
CAN-SB Jerry Cans
FUEL ACCESSORIES
FUEL-GUARD DECONTAMINATOR
Features
• Removes 95% of solid contaminants and 99.9%
visible and emulsified water
• Reusable filter element, no replacement filter cartridge
is required
• Simple maintenance with no tools needed
• Can be used with both petrol and diesel fuels
• Conforms to the Boat Safety Scheme
How It Works
The Fuel-Guard decontaminator is sited between the fuel tank
and the engine fuel filter. Fuel enters the specially designed
element which induces a swirling action separating off the water
and solid contaminants.
The formulated green coating on the element allows fuel to pass
through repelling all water and contaminants to the base of the
filter housing.
Contaminated fuel can be seen at the base of the filter housing
and can be easily and safely drained off.
The element is simple to remove and can be washed with clean
fuel should it become blocked.
Part No.
Max Engine
Size (BHP)
Fuel Connections
(BSPF)
Spare
Elements
2-76980
2-76981
2-76982
150
600
1200
3/8''
1/2''
1/2''
12-76980-1
12-76981-1
12-76982-1
How It
Works...
Fuel Fittings
Part No.
1-14070
1-14110
1-14130
1-14140
1-14170
Male Stud Coupling
1
⁄4 " x 3⁄8 " BSPT
5
⁄16 " x 3⁄8 " BSPT
3
⁄8 " x 3⁄8 " BSPT
3
⁄8 " x 1⁄2 " BSPT
1
⁄2 " x 1⁄2 " BSPT
Part No.
1-25240
1-25270
1-25290
1-25300
1-25330
1-25360
Male Stud Coupling
6mm x 3⁄8 " BSPT
8mm x 3⁄8 " BSPT
10mm x 3⁄8 " BSPT
10mm x 1⁄2 " BSPT
12mm x 1⁄2 " BSPT
15mm x 1⁄2 " BSPT
CAN-SB PLASTIC
FUEL JERRY CANS
2-20115
2-20117
2-20116
See page 40
for range of
Shakespeare
Fuel Additives
Part No. Ltrs
2-20115
5
2-20116 10
2-20117 20
H (mm)
260
375
220
W(mm)
265
265
370
ANTI-SYPHON LOCK WITH VALVE
Universal anti-syphon lock
valve to prevent fluids
syphoning from a tank
or sea water
intake/outlet.
Diameters: 13 to 38mm A
Height (A): 158mm (61⁄4'')
Width (B): 305mm (12'')
Part No. 2-20295
42
L(mm)
145
145
380
B
B
A
Weight
1.75kg
2.5kg
3.2kg
Valves, Skin Fittings
& Gas Accessories
VALVES & SKIN FITTINGS
GUIDI ‘ALEX’ NON-STICK
BRONZE SAFETY VALVE
Specially designed for marine applications, the valve can be mounted in any position, giving full flow through
both directions. The valve includes open and closed indicator incorporated in an ergonmic operating control.
Technical Specifications:
Components that come into contact with fluid.
Body:
Bronze CC491K (UNI 1982)
Seal:
Neoprene
Operating Knob: Fire resistant ABS
G/BSP SW
3
⁄8 "
25
1
⁄2 "
25
3
⁄4 "
31
1"
38
1 1⁄ 4 "
47
1 1⁄ 2 "
54
2"
67
F
15
15
20
25
33
38
48
A
11.4
15
16.3
19.1
21.4
21.4
25.7
V
53
53
58
63
72
78
90
L
H
67 76
67 76
73 85
84 94
97 110
103 118
124 139
Part No
1-71750
1-71751
1-71752
1-71753
1-71754
1-71755
1-71756
GUIDI LONG BRONZE SKIN FITTINGS
Long Bronze Skin Fitting
Scoop
G*/BSP SW H D D1 A F Part No. Part No.
The new range of long bronze skin fittings
have internal anti-rotation nibs for
easy installation and can be used
with the bronze external scoop fitting.
⁄4 "
1"
11 ⁄ 4 "
11 ⁄2 "
2"
21 ⁄2 "
3"
3
Scoop to be
ordered
separately
32
41
49
56
69
85
100
185
206
206
207
207
238
238
47
57
67
75
88
108
122
46
57
67
75
88
108
122
180
200
200
200
200
230
230
19
24
32
37
48
63
75
2-70132
2-70133
2-70134
2-70135
2-70136
2-70137
2-70138
2-70262
2-70263
2-70264
2-70265
2-70266
2-70267
2-70268
Dimensions in mm.
Material: UNI EN 1982 CC491K (CuSn5Zn5Pb5-C)
DZR SWING CHECK VALVES
Features
• Full bore high flow rate
• Heavy duty and high corrosion resistance
• Upper plug allows cleaning and maintenance
• Flow direction arrow indicated on valve body
• Horizontal mounting position
Specifications:
Body and Cap:
Cap Seal:
Temperature Limits:
Pressure Limits:
Thread:
DZR Brass CW602N (Dezincification Resistant)
EPDM
-20ºC to +120ºC
16 BAR
BSP Female thread to UNI ISO 7/1 (UNI EN 10226) DIN2999
BSP Bore A
B
1
⁄2 "
15
59 15
3
⁄4 "
20
68 16.5
1"
25
84 19
1 1⁄ 4 "
32
96 21.5
1 1⁄ 2 "
40 105.5 21.5
2"
50 125 26
PROPANE REGULATOR (37MB)
Gold regulators offer highest level of
performance and safety for small to medium
LPG installations (domestic or commercial)
as a single stage low pressure regulator.
Part No. 1-59092
Specifications:
Inlet Connection:
Outlet Connection:
Inlet Pressure
Outlet Pressure
Flow Rate LPG:
C
31.5
34.5
44.5
47
53.5
63.5
Ch
26
32
39
48
55
68
Part No
1-17351
1-17352
1-17353
1-17354
1-17355
1-17356
GC100 GASCHECKER
• Easy to install and efficient to use
• Safety Pressure Relief Valve as standard
• Filter on Inlet when connected directly to gas cylinder
• Maximum capacity of up to 5kg/h (69kW)
• BS EN Standard EN13785
UK POL 5⁄8 LH Male NUT Propane
⁄2 '' BSPT Female
1 - 16 bar
37 mbar
5 kgh (69kw)
1
See Section 1 For Gas Changeover Kits, Wall
Blocks, Gas Pigtails, Gas Pipe & Fittings
• Simple way to check the level of gas in
your LPG bottle
• Clear green / red indicator shows the
gas level in the bottle
• Works with standard metal propane or
butane gas bottles between 200 350mm diameter.
Part No. 1-59300
See page 48 for more information.
43
Ultraflex Rotary Steering
Systems & M90 Cable
STEERING
ULTRAFLEX T91 AND T93ZT (ZERO TORQUE)
ROTARY STEERING SYSTEMS
A Complete Steering System Consists Of:
STEERING HELM:
4-T91 - single cable steering helm
4-T93ZT - zero torque single cable steering helm, benefits user
from no feedback effect through the steering.
MOUNTING BEZEL:
4-X34 - black, 90° mounting
4-X34W - white, 90° mounting
4-X35 - black, 20° mounting
STEERING CABLE:
M90 Mach (patented) - see below
Featuring Planetary
Gear Design
OPTIONAL STEERING WHEEL (see Section 4)
ENGINE CONNECTION KITS (see Section 4)
Features And Technical Specifications:
• Specifically designed for high performance and high efficiency
applications
• M90 mach cable (patented) performance and durability
increased by top quality materials and construction
• Fast connect, simple installation, patented end fitting
• Engine side stainless steel cable output end featuring patented
gasket
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° helm mounting installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 4,2
• Stroke: 228 mm (9'')
• Maximum allowable steering wheel diameter: 406 mm (16'')
• Minimum steering cable bend radius: 200 mm (7.9'')
• Minimal feedback
• T91 and T93ZT steering systems are not to be used on boats
equipped with engines that exceed the maximum horsepower
rating of the boat
• For boats faster than 50 mph our hydraulic steering systems
are recommended
• Exceeds EN 28848 & ABYC P17 safety standards
4-T93ZT
M90 MACH LOW FRICTION STEERING CABLE
M90 Mach steering cable is suitable for use also with 4-T85, 4-T71FC, 4-T72FC, 4-T73NRFC, 4-T74NRFC,
4-T81FC, 4-T83NRFC Ultraflex steering helms.
Part No.
Length
Note: M66 steering cable cannot be fitted to 4-T91 and
4-M90-08
8ft
(2.44m)
4-T93ZT steering systems
4-M90-09
9ft (2.74m)
4-M90-10
10ft (3.05m)
4-M90-11
11ft (3.36m)
4-M90-12
12ft (3.66m)
4-M90-13
13ft (3.97m)
4-M90-14
14ft (4.27m)
4-M90-15
15ft (4.58m)
4-M90-16
16ft (4.88m)
4-M90-17
17ft (5.19m)
4-M90-18
18ft (5.49m)
4-M90-19
19ft (5.80m)
4-M90-20
20ft (6.10m)
44
4-T91
4-X34W
90° Mounting Bezel Kits
4-X35
20° Mounting Bezel Kit
4-X34
Ultraflex GoTech™
Steering System
STEERING
GOTECH™- PACKAGED OUTBOARD STEERING SYSTEM FOR SINGLE ENGINE UP TO 115 HP
• For outboard single engine up to 115 hp • Wheel turns 4,5
1
2
GOTECH™ package kit contains:
UP18 Intermediate helm pump
Steering wheel
UC81-OBF Front mount outboard cylinder
is not included.
OL 150 Hydraulic oil – 2 litres.
KIT OB-GT/M Hose kit dia. 1/4" 6m (19.7') length
Part No. 4-48120
APPLICATION GUIDE FOR UC81-OBF
3
Engine
KIT OB-GT/M - Hose Kit with Preassembled Fittings at One
End for Single Station Application.
Consists of a pair of high pressure flexible hose dia. 1⁄4 '' with fittings
featuring turning nuts preassembled at one end only and supplied with
two non assembled fittings. 6m (19.7') standard length that can be cut to
fit the desired application and loose hose fittings easily fitted to cut ends.
1
Mercury®
Mariner®
Evinrude®
2 UP18 HELM PUMP
• Built-in lock valve for positive rudder lock
• Integral relief valve for over-pressure protection
• 3⁄4 " tapered anodized aluminium shaft
• Corrosion proof
Model:
composite housing
Mounting:
• Easy accessible lock valve and Displacement/
shaft seal for replacement
Revolution:
• For use with UC81-OBF
No. of pistons:
cylinder only
Relief Valve Setting:
• Intermediate dashboard
Max Wheel Dia.:
position mount
Weight:
UP18
Intermediate
18 cc – 1.1 cu.in.
5
55 Bar - 800 PSI
508mm (20'')
3.6kg (8lbs)
Yamaha®
Honda
®
Suzuki®
Tohatsu®
Nissan®
3 UC81-OBF CYLINDER
• Balanced: the number of turns
lock-to-lock is equal port to
starboard and vice-versa.
• Depending on the applications
on the outboard engine, the
UC81-OBF can be installed port
or starboard
Model:
Volume:
Output force:
Inside diameter:
Stroke:
Bleed fittings:
3
⁄8 '' (9.5mm)
Fittings:
UC81-OBF
81 cc - 4.9 cu. in
222 kg - 489 lbs
27.4 mm - 1.08''
186 mm - 7.3''
DN5 Quick connect
For high pressure
flex hose
Selva®
Johnson®
Power
50 - 75 - 90 2 Stroke
115 EFI 2 Stroke
75 - 90 - 115 Optimax 2 Stroke
40 - 50 - 60 EFI 4 Stroke
75 - 80 - 90 EFI 4 Stroke
100 - 115 EFI 4 Stroke
E40 - E50 - E55 - E60 2 Stroke
E75 - E90 2 Stroke
E115 2 Stroke V4
60 - 70 2 Stroke
75C - 90 2 Stroke
115C 2 Stroke
F40G - F70 4 Stroke
F30 - F40 - F60 - F75 - F80 EFI 4 Stroke
F90 - F100 - F115 EFI 4 Stroke
F80 - F100 4 Stroke
F115
F40D - F50F - F60C EFI 4 Stroke
BF40 - 50 - 60 - 75 - 90 4 Stroke
BF115D
BF115A
BF90 V-TEC 4 Stroke
DF40 - 50 - 60 - 70 - 80 - 90 4 Stroke
DF100 - 115 4 Stroke*
DF100 - 115 4 Stroke New Model
40 - 50 - 60 - 70 - 90 2 Stroke
75 - 115 2 Stroke
40 - 50TLDI 4 Stroke
70 - 90 - 115 TLDI 4 Stroke
40XS - 50 Madeira 2 Stroke
40XS - 50 Bull shark 2 Stroke
40XS - 60 Grey shark 2 Stroke
40XS - 70 Mako shark 2 Stroke
40XS - 60 St Tropez 2 Stroke
80 Portofino / Tigershark 2 Stroke
25 Kingfish 4 Stroke
40 Aruana 4 Stroke
40XS - 40XSR 50 - 60 Derado EFI 4 Stroke
40XSR EFI Murena 4 Stroke
80XS - 100 - 100XSR EFI Marlin 4 Stroke
115 - 115XSR EFI Tarpon 4 Stroke
115 - EFI Narwhal 4 Stroke
BJ60 - 70 4 Stroke
BJ90 - 115 4 Stroke
J90 - 115 V4 2 Stroke
Year
1990 - 2008
1990 - 2007
2004 to date
2004 to date
2000 to date
2007 to date
2004 to date
2004 to date
1995 to date
1984 - 2008
1998 - 2008
1990 - 2008
2010 to date
1999 - 2007
1999 - 2007
2000 to date
2004 to date
1995 to date
1998 - 2009
2009 to date
2008 to date
1998 to date
1998 - 2008
2008 to date
2004 to date
2004 to date
2004 to date
2004 to date
1995 to date
2000 to date
2001 -2007
2001 -2007
1995 -2007
*NOTE: Suzuki® engines built from 1998 to 2008 installing
UC81-OBF cylinder require optional KIT SU Part No. 4-48130
Suitable for an outboard engine up to 115hp and
where the boat does not exceed 34.5mph (30 knots).
NOT INTENDED FOR USE IN RACING APPLICATIONS
45
Dometic Alcohol Hobs
and Oven
GALLEY EQUIPMENT
NEW RANGE
Alcohol cookers are traditionally considered to be the safest way to cook at sea. That’s because they work without pressure, are pleasantly
quiet and require little space. Customers appreciate the long burning times and the functional design using rust-free stainless steel. They
can be permanently installed in the pantry or galley, and can also be used as free-standing units on deck. Origo stoves are fueled using
denatured alcohol; methylated spirit.
3
2. Carrying handle
3. Flexible potholders (optional
accessory)
• Compact design – easy to stow
• Carrying handle for one-handed transportation
• Patented, easy-to-access alcohol fuel container
• High cooking performance
• Gimbals and flexible potholders as optional extra
4. Safety lock
4
6
2
5. Pan support (removable for
easy cleaning)
6. Feet (enabling fixed installation)
Gimbals & pot holders available as optional extra.
Origo Two
Origo One
6-01450
Origo One
approx 4.5 hours
1
2000 W
10 mins
1.2L per tank
237 x 165 x 300mm
273 x 228 x 300mm
2.9kg
6-01451
Origo Two
approx 4.5 hours
2
2000 W per burner
10 mins
1.2L per tank
464 x 165 x 300mm
500 x 228 x 300mm
5.8kg
Part No.:
Model:
Burning Time:
No. of Burners:
Burner Capacity:
Boiling Time (1L of water):
Tank Capacity:
Dimensions (W x H x D):
Weight:
ORIGO 6000 2 BURNER
FREESTANDING
ALCOHOL HOB / OVEN
• High cooking power on all plates
– fast, flexible cooking on board
• Easy access to the alcohol-fuel
container – simple and safe to fill
• With gimbals – to keep the stove
level in all weathers
Optional Accessories:
Pot Holder Part No. 6-01452
ORIGO 5100 HEAT PAL 1 BURNER
HEATER / ALCOHOL BURNER
• Heater and stove all in one
• Can also be used for keeping food warm
• 1500 watts output in heater mode
• For indoors and outdoors
Optional Accessories: Pot Holder - Part No. 6-01453 Gimbal Kit - Part No. 6-01454
46
FEATURES:
1. Burner with flame spreader
1
ORIGO ONE & ORIGO TWO
FREESTANDING ALCOHOL HOBS
Part No.:
Model:
Burning Time:
No. of Burners:
Burner Capacity:
Boiling Time (for 1L of water):
Tank Capacity:
incl. gimbals
Weight:
5
Part No.:
Model:
Oven Output:
Oven Capacity:
Burning Time:
No. of Burners:
Burner Capacity:
Boiling Time (for 1L of water):
Tank Capacity:
Built-in Dimensions
Weight:
DELIVERY
6-01440
Origo 5100
approx 5 hours
1
1500 W
15 mins
1.2L per tank
285 x 150 x 285mm
2.5kg
6-01441
Origo 6000
1500 W
22 Litres
approx 4.5 hours
Hob 2 / Oven 1
2000 W per burner
10 mins
1.2L per tank
465 x 562 x 335mm
510 x 562 x 335mm
28.8kg
Dometic Gas Hobs
and Ovens
GALLEY EQUIPMENT
1
NEW RANGE
8
3
7
2
4
5
MOONLIGHT TWO 2 BURNER GAS
HOB WITH OVEN & GRILL
Part No.:
Model:
Electronic 12V ignition:
Oven Output:
Gas Consumption Oven:
Grill Output:
Gas Consumption Grill:
Cooker Output:
Gas Consumption Cooker:
Gas Supply Pressure:
No. of Burners:
Oven Capacity:
incl. semi-gimbal suspension:
Weight:
MOONLIGHT THREE 3 BURNER
GAS HOB WITH OVEN & GRILL
6-01402
Moonlight Two
Yes
1.2kW
87g/h
1.6kW
116 g/h
1 x 2.2kW; 1 x 1.8kW
291 g/h
30 mbar
2
28 Litres
500 x 390 x 395mm
525 x 457 x 395mm
20kg
6-01403
Moonlight Three
Yes
1.2kW
87g/h
1.6kW
116 g/h
1 x 2.2kW; 1 x 1.8kW, 1.1kW
364 g/h
30 mbar
3
30 Litres
473 x 435.4 x 470mm
501 x 500 x 470mm
21kg
6
FEATURES:
1. Burner
2. Electronic ignition
3. Potholders
4. Interior light in oven
5. Bottom hinged transparent door
with safety lock
6. Lock for gimbals
7. Glass top surface
8. Gimbals included
• Heat-resistant safety glass surface elegant and easy to clean
• Full flame faliure gas shut off
See page 48 For GC100 GasChecker Bottle Indicator
DOMETIC STARLIGHT 2 BURNER GAS HOB WITH OVEN & GRILL
• Extra slim design for small
galleys
• Easy clean stainless steel
surface
• 28 Litre thermostatically
controlled oven with grill
• Transparent bottom hinged
oven door with safety lock
• Stainless steel burner caps
and pan supports
• Semi gimbal suspension
• Includes oven rack and
baking tray
• Full flame failure gas
shut off
DELIVERY
Part No.:
Model:
Oven Output:
Grill Output:
Cooker Output:
No. of Burners:
Oven Capacity:
incl. semi-gimbal suspension:
Weight:
6-01400
Starlight
1.1kW
80g/h
1.3kW
100 g/h
1 x 2.2kW; 1 x 1.8kW
291 g/h
30 mbar
2
28 Litres
448.6 x 507.5 x 356.9mm
475 x 539.5 x 536.5mm
23kg
47
Dometic Gas Oven/Grills
& Freestanding Hobs
NEW RANGES
GALLEY EQUIPMENT
SMEV GAS OVENS WITH GRILL
F0211GT & F0311GT
• With rotary tray and highly insulated multi-layer door
(6-01412 does not have the rotary tray)
• Electronic 12-volt ignition
• Safety ignition system
• Bottom hinged oven door with safety lock
• Supplied with rack and baking tray (FO311GT only)
Part No.:
Model:
Electronic 12V ignition:
Oven Output:
Grill Output:
Oven Capacity:
Built-in Dimensions:
Weight:
6-01410
FO211GT
Yes
1.2kW
87g/h
1.6kW
160 + 131 g/h
291 g/h
30 mbar
20 Litres
530 x 310 x 410mm
504 x 283 x 460mm
13.2kg
6-01410
6-01411 & 6-01412*
FO311GT
Yes
1.2kW
87g/h
1.6kW
160 + 131 g/h
364 g/h
30 mbar
30 Litres
530 x 430 x 415mm
500 x 410 x 460mm
19.5kg
6-01411 / 6-01412*
*6-01412 does not feature rotary tray
DOMETIC GC100 GASCHECKER
DOMETIC FREESTANDING
GAS COOKERS
EK1600 & EK3200
Indicator for identifying the fill level of all
standard propane and butane gas bottles.*
• Can be used as permanently
installed or free-standing unit
• Adjustable potholders
• Heat Shields
• High-quality stainless steel
The probe is placed at various points on the surface
of the bottle horizontally. If there is gas in the bottle at
the point where the measurement is taken, then the
GasChecker signal lamp lights up in green. At those
points where there is no gas,
it changes to red.
EK1600
EK3200
Part No.:
Model:
Power Rating:
Number of Burners:
Gas Consumption:
Dimensions (W x H x D) with gimbals:
Dimensions (without gimbals):
Weight:
6-01406
EK1600
1.6kW
1
115 g/h
30 mbar
281 x 245.7 x 262mm
237 x 71.1 x 262mm
2.9kg
Optional Extra: Gimbals - Part No. 6-01408
48
6-01407
EK3200
2 x 1.6kW
2
230 g/h
30 mbar
508 x 245.7 x 262mm
464 x 71.1 x 262mm
4.2kg
• Reliable level measurements using ultrasound
• Suitable for all steel and aluminium gas bottles with a
diameter of 200 - 350mm (with the exception of self
refilling bottles)
• Dimensions: 16mm Ø x 113mm
• Tested for explosion protection
Part No. 1-59300
*Not suitable for use on plastic bottles, self refilling
gas bottles (because internal components can
deflect the measurement signal).
DELIVERY
Dometic Built-in Gas
Hobs & Hobs with Sinks
GALLEY EQUIPMENT
NEW RANGES
SMEV BUILT-IN 2 & 3 BURNER GAS HOBS
PI8062M and PI8063M
• Integrated heat-resistant safety glass lid
• Detachable chromed pan supports
PI8062M
PI8063M
• Recessed controls
• Electronic 12-volt ignition
• Rubber seal
Part No.:
Model:
Electronic 12V DC ignition:
Power Rating:
Number of Burners:
Gas Consumption:
Built-in Dimensions (W x D):
Weight:
6-01420
PI8062M
Yes
1 x 1kW; 1 x 1.8kW
2
204 g/h
30 mbar
480 x 90.5 x 370mm
466 x 358mm
3.6kg
6-01421
PI8063M
Yes
1 x 1kW; 2 x 1.8kW
3
335 g/h
30 mbar
560 x 90.5 x 440mm
546 x 428mm
5.2kg
• Detachable chrome pot grid
• Enamelled burner caps
• Rubber seal
Note: Tap not included.
6-01425
6-01428
6-01427
6-01426
SMEV 2 BURNER GAS HOB
PI2232M
• Detachable chromed pan support
• Piezo ignition
• Rubber seal
Part No.:
Model:
Power Rating:
Number of Burners:
Gas Consumption:
Weight:
6-01422
PI2232M
1 x 1kW; 1 x 1.8kW
2
204 g/h
30 mbar
380 x 90 x 280mm
1.7kg
SMEV BUILT-IN 2 BURNER GAS HOBS
WITH SINK
Part No.:
Model:
Sink Position:
Power Rating:
Gas Consumption:
Number of Burners:
Weight:
6-01425
6-01426
MO917L
MO917R
Left
Right
1 x 1kW; 1 x 1.8kW
204 g/h
30 mbar
2
600 x 120 x 420mm
566 x 386mm
2.5kg
Part No.:
Model:
Sink Position:
Power Rating:
Gas Consumption:
Number of Burners:
Weight:
6-01427
6-01428
MO927L
MO927R
Left
Right
1 x 1kW; 1 x 1.8kW
204 g/h
30 mbar
2
490 x 120 x 460mm
456 x 426mm
2.5kg
49
Dometic Built-in Sinks &
Ceramic Cooktops
NEW RANGES
GALLEY EQUIPMENT
SMEV BUILT-IN SINKS WITH GLASS LID
Heat-resistant safety glass lid, AC 540 siphon,
rubber seal, with hole for tap (Ø 39mm).
Note: Tap not included.
Part No.:
Model:
Dimensions (W x D x H):
Weight:
6-01430
VA8005
416 x 368 x 145mm
405 x 355mm
2.7kg
6-01431
VA8006
416 x 440 x 145mm
405 x 425mm
3.4kg
6-01432
VA7306FP
(Ø x H) 420 x 148mm
Ø 400mm
3.5kg
DOMETIC ORIGO BUILT-IN
230V CERAMIC COOKTOPS
Ideal for modern marine galleys, a long
lasting new look is ensured due to the
scratch-resistant ceramic glass.
Available in one and two hotplate
models, the cooktop gives a flush
mounted installation, which makes the
unit and its surroundings extremely
easy to clean.
• Flexible width/depth installation - suitable for
boats of most sizes
• Flush mounted - elegant appearance
• High cooking power on all plates - fast
and flexible
• Residual heat indicator lights for maximum safety
• Variable power regulator - gives precise,
variable temperature control
• Rounded edge ceramic cook top - very easy
to clean and keep clean
Part No.:
Model:
Input voltage:
Number of Hobs:
Heating Capacity:
Built-in Dimensions (W x H x D):
Weight:
Flexible Installation
The controls are located on top and positioned so that the cooktops can
be turned to fit into cramped spaces. They are equipped with hi-light
hotplates that heat up in about three seconds, and give even heat
distribution. Variable heat settings help prevent boiling over or burning.
50
6-01442
E100
230V AC
1
1200 Watts
300 x 77 x 320mm
275x 80 x 294mm
4.1kg
6-01443
E200
230V AC
2
1200 Watts per plate
535 x 77 x 300mm
509 x 80 x 275mm
6.3kg
Safety Onboard
The controls work on the push and turn principle to prevent them
being switched on accidentally. The stove top has a residual heat
indicator light to ensure safety. The light remains lit as long as the
surface is hot even after being switched off.
SEE SECTION 9 FOR FOLDING TAPS
Dometic Waeco Refrigeration
Technical Information
GALLEY EQUIPMENT
With a wide and diverse range of
refrigeration to meet customers
individual needs, the Waeco Coolmatic,
Coolfreeze and Thermoelectric
products offer an appliance to suit
many onboard and leisure applications.
WAECO FRIDGE INSTALLATION GUIDE
WAECO FRIDGE CABLE CONNECTION GUIDE
Refrigerators need good air circulation to prevent heat build up around the
condenser to enable efficient operation. The refrigerator cabinets allow cool
air to enter at the bottom. Additional ventilation must be added at the top of
the cabinet containing the fridge to allow heat to escape.
This can either be a vent spanning the full width of the
condenser on the rear of the fridge
(Dia.1), or side vents top and bottom on
either side of the fridge at the rear of the
cabinet (Dia.2).
The supply cable to the fridge should be the correct size to ensure there
is not a voltage drop during start up.
Size
CABLE GUIDE
CHART
Note: Poor connections on terminals, switches and fuse
holders can also result in voltage drops.
Dia.1
See Section 8 for electrical cable
and accessories.
Dia.2
WAECO QUICK SELECTION GUIDE
Model
Dimensions
W x H x D mm
Capacity
Weight
Fridge Freezer Comp
Kg
Aquafax
Part No.
CRP-40*
CR-50
CR-65
CR-80
CR-110
CR-140
CB-36*
CB-40*
380 x 534 x 492
380 x 534 x 447
448 x 525 x 492
475 x 640 x 475
520 x 745 x 505
525 x 805 x 569
590 x 410 x 410
500 x 660 x 340
39 Lt
48 Lt
64 Lt
80 Lt
108 Lt
136 Lt
36 Lt
40 Lt
6-59999
6-60001
6-60003
6-60005
6-60007
6-60008
6-60130
6-60131
5.3 Lt
5 Lt
7.2 Lt
7.9 Lt
10.2 Lt
11.5 Lt
n/a
n/a
18kg
19 kg
20 kg
23 kg
28 kg
32 kg
18.5 kg
20 kg
Features
Detachable cooling unit
CR range is tropical rated
with three star freezer
compartment
Top loading fridge
or freezer
For safety reasons Waeco
compressor fridges are
protected against reverse
polarity.
To protect the battery, the
refrigerator switches off
automatically if the voltage is
insufficient.
Cut-off voltage: 10.4V (12V),
22.8V (24V). Cut-in Voltage:
11.7V (12V), 24.2V (24V)
* Features detachable cooling unit with 1.5m supply cable
WAECO MOBILE REFRIGERATION
Refrigeration Formula - Power Consumption
watts ÷ voltage = amps x running time = Ah power consumption
For example:
45 (watts) divided by 12 (supply voltage) = 3.75 amps
Average run-time = 55% at 32ºC ambient with 50mm PU insulation
in 100 litres fridge with temp of 5ºC
Therefore 55% of 3.75 amps = 2.06 Ah average power consumption
51
Dometic Waeco Coolmatic
Compressor Fridges
GALLEY EQUIPMENT
WAECO COOLMATIC CR
FRIDGE 12/24V
6-60007
6-60005
• Fully hermetic compressor
6-60003
• Low voltage protection/electronic fuse/
automatic reverse pole protection
• Dynamically ventilated wire condenser
• Separately insulated *** freezer compartment
• Integrated foam rear wall evaporator for optimal
temperature distribution
• Magnetic door seal
• Variable door mounts and locks (left/right hand)
• Double door lock system (top/bottom) with dual
function (locking/ventilation)
• Large door mounted bottle holder
6-60001
• Condensation drainage via separate hose
connection or collecting tank
MAINS ADAPTER
• Tropical Rated (equivalent to ISO 7371)
Waeco CR fridge mains 110V/240V adapter
Part No. 6-60009
• Test Marks: TUV/GS, e-approved to 95/54/EC
(EMC guidelines for vehicles), CE Marked.
Installation Frames (Optional if required)
Model:
6-60001
6-60003
6-60005
6-60007
6-60008
Standard Frame
6-60001S 6-60003S 6-60005S 6-60007S 6-60008S
Flush-mount Frame 6-60001F 6-60003F 6-60005F 6-60007F 6-60008F
6-60007
Technical Specifications
Part No.
Model:
Gross Capacity:
Voltage:
Average power:
Input current consumption
at ambient temperature (12V):
Material:
Colour:
Weight:
Dimensions†: (without door**)
(with standard frame)
(with flush-mount frame)
6-60008
FLUSH MOUNT
STANDARD MOUNT
VENT
LOCK
6-60001
6-60003
6-60005
6-60007
6-60008
CR-50
CR-65
CR-80
CR-110
CR-140
48 litres/5 litres*
64 litres/7.2 litres* 80 litres/7.9 litres*
108 litres/10.2 litres*
136 litres/11.5 litres*
12/24 Volts DC
12/24 Volts DC
12/24 Volts DC
12/24 Volts DC
12/24V DC & 100–240V AC
40 watts
45 watts
48 watts
50 watts
65 Watts
1.4Ah/h at +25ºC 1.6Ah/h at +25ºC 1.8Ah/h at +25ºC
2.2Ah/h at +25ºC
2.3Ah/h at +25ºC
1.7Ah/h at +32ºC 1.9Ah/h at +32ºC 2.1Ah/h at +32ºC
2.5Ah/h at +32ºC
2.6Ah/h at +32ºC
(both at +5ºC interior temperature and -18ºC in the freezer compartment)
Fittings in stainless steel, interior in plastic, door frame in plastic, body with coated metal frame
Body: black, door frame: silver, door panel: matt silver (brushed stainless steel appearance)
19kg
20kg
23kg
28kg
32kg
380x534x447mm 448x525x492mm 475x640x475mm
520x745x505mm
525x805x569mm
384x536x447mm 452x527x492mm 479x642x475mm
524x747x505mm
529x807x569mm
406x536x495mm 474x527x540mm 501x642x523mm
546x747x553mm
551x807x619mm
* freezer capacity included within gross capacity † Dimensions are (w x h x d) **Door thickness: 53mm
52
DELIVERY Unable to send via
carrier due to potential damage. Please
contact your local Aquafax sales depot
for delivery methods, e.g pallet.
Dometic Waeco Coolmatic
Compressor Fridges
GALLEY EQUIPMENT
WAECO COOLMATIC CRP-40 FRIDGE
• Low voltage protection / electronic fuse/auto
reverse pole protection
• Dynamically ventilated wire tube condenser
• Magnetic door seal with variable door mounts
(left or right hand opening) with easy change
décor panel
• Patented double door lock system
(top/bottom) with close or vent control
Specification:
Part No.:
Model:
Storage Volume:
Voltage:
Average Power Input:
Consumption at ambient
temperature (12V):
Material:
Colour:
Weight:
Dimensions (WxHxD):
without door:
with standard frame:
with flush-mount frame:
• Cooling unit can be mounted separately
up to 1.5m away from the cabinet**
• Insulation: PV foam all round
Test marks: TUV/GS,
e-approved (Automotive
EMC Directive), CE Marked.
6-59999
CRP-40
39 litres / 5.3 litres*
12/24 Volts DC
40 Watts approx
1.5 Ah/h at +25°C, 1.8 Ah/h at +32 °C,
both at +5ºC interior temperature
Fittings in S/S, plastic interior, body of
coated sheet steel
Body: Black. Door frame: Silver.
Door Panel: Matt Silver (brushed
stainless steel appearance)
18kg
Optional Accessories
Model Part No.
Standard Installation Frame
Flush Installation Frame
Mains Adaptor
6-59999
6-60001S
6-60001F
6-60009
Moveable Cooling Unit
380 x 534 x 492mm
(380 x 534 x 310mm) w/o cooling unit**
384 x 536 x 492mm
406 x 536 x 545mm
* Freezer capacity included within storage volume.
** Cooling Unit can be moved up to 1.5m from the cabinet.
COOLMATIC DRAWER FRIDGES
NEW
A smart solution in confined spaces: the cooling unit can
be fitted to the side of the cooler (left/right), or up to 1.5
metres away.
• Convenient access with easy-pull drawers running on roller
bearing slides
• Temperature regulation with continuously variable thermostat
• Unlocking and opening with a single movement
• Safe locking mechanism
• Fully hermetic compressor with integrated control electronics
• Low-voltage protection for starter battery
• Electronic fuse/automatic reverse pole protection
• Dynamically ventilated wire condenser
• Aluminium rollbond evaporator
• Heat dissipation to the outside with brushless, wear-free fan
Mains 240V Adapter for
CD-20 & CD-30 fridges.
Part No. 6-60199
(See page 55 for details)
6-60133
Part No:
Model:
Gross capacity:
Voltage:
Ave power consumption:
Temperature range:
temperature (12V):
Material:
Dimensions (wxhxd) :
Colour:
Weight:
6-60135
6-60133
6-60135
CD-20
CD-30
20 litres
30 litres
12/24 V DC
12/24 V DC
40 Watts
40 Watts
+15ºC to 0ºC
+12ºC to -2ºC
0.67 Ah/h at +20°C, 1.33 Ah/h at +32 °C,
both at 5ºC interior temperature
Sturdy metal housing with injection moulded parts
438x250x555mm*
440x250x730mm*
Black
Black
16.1kg
18kg
*with compressor mounted on fridge
53
Dometic Waeco Coolmatic Fridge/
Freezers & Packaged Cooling Units
GALLEY EQUIPMENT
COOLMATIC CB-36 & CB-40 TOP LOAD FRIDGE/FREEZERS
• Detachable cooling unit
(1.5m supply cable)
with integrated control
electronics
• Low-voltage protection
• Electronic fuse/automatic
reverse pole protection
• Three-sided, statically
ventilated wire condenser
6-60131
mounted on a bottom plate
• Temperature range:
+10ºC to -12ºC
6-60130
• Insulation: PU foam all round
• Vertical space for standing
2-litre returnable bottles
Part No:
Mains 240V Adapter for CB
Model:
fridges - Part No. 6-60199
Gross capacity:
Voltage:
Average power consumption:
temperature (12V):
Material:
Dimensions:
Colour:
Weight:
6-60131
Dimensions
6-60130
Dimensions
6-60130
CB-36
36 litres
12/24V DC
45 Watts
0.56 Ah/h at +20°C, 0.94 Ah/h at +32 °C,
Outside: zinc coated sheet steel, inside:
stainless steel, base: shock-resistant plastic
590x410x410mm* (wxhxd)
Body: grey Lid panel: pale grey
17kg
6-60131
CB-40
40 litres
12/24V DC
45 Watts
0.64 Ah/h at +20°C, 1.01 Ah/h at +32 °C,
Outside: zinc coated sheet steel, inside:
stainless steel, base: shock-resistant plastic
500x660x340mm* (wxhxd)
Body: grey Lid panel: pale grey
19kg
*including compressor mounted on fridge
WAECO COOLING UNIT & EVAPORATOR PACKAGES
These two ColdMachine CU 55 package units offer the perfect solution for small refrigeration solutions and use in cold waters. Package 1 includes an
L-shaped evaporator for refrigerator capacities up to 100 litres, Package 2 has an O-shaped evaporator for refrigeration capacities up to 130 litres.
PACKAGE 1
Part No. 6-60190
PACKAGE 2
Part No. 6-60191
ColdMachine CU 55
• 12/24V DC operation
• Includes CU55 fully hermetic
compressor with dynamically
ventilated condenser and self
sealing valve couplings
• Adjustable low voltage cut-off and
reverse polarity protection integrated
electronic control
ColdMachine CU 55
• 12/24V DC operation
• Includes CU55 fully hermetic
compressor with dynamically
ventilated condenser and self
sealing valve couplings
• Adjustable low voltage cut-off and
reverse polarity protection
integrated electronic control
L-Shaped Evaporator VD-01
• Cooling capacities of max. 80 litres with 35mm PU insulation or max.
100 litres with 50 PU insulation
• Power consumption approx. 35W
• Can be mounted horizontally or vertically
• Supplied with self sealing couplings, 2m flexible connection line,
adjustable surface mounted thermostat with LED indicator and 3m
connection cable
O-Shaped Evaporator VD-07
• Cooling capacities of max. 100 litres with 35mm PU insulation or max.
130 litres with 50 PU insulation
• Power consumption approx. 35W
• Can be mounted horizontally or vertically
• Supplied with self sealing couplings, 2m flexible connection line,
adjustable surface mounted thermostat with LED indicator and 3m
connection cable
Box Dimensions (W x H x D): 220 x 160 x 220mm 6.5kg
Box Dimensions (W x H x D): 220 x 160 x 220mm 6.5kg
See page 55 for more details on the CU55 Cold Machine, VD-01 and VD-07 evaporators.
54
Dometic Waeco Cold
Machine Cooling Units
GALLEY EQUIPMENT
Plate Evaporator VD-02
L-Evaporator VD-01
O-Evaporator VD-07
Standard Plate evaporator for horizontal and
vertical installation.
Standard L-shape evaporator for horizontal
and vertical installation.
Standard O-evaporator for horizontal or
vertical installation.
EVAPORATORS FOR
COLD MACHINE
SERIES 50
• Self-sealing valve couplings
• Flexible connections pipe
approx. 2m
• Continuously variable thermostat
(for external installation with blue
turning dial & LED indicator in
white plastic housing)
• Electric supply cord approx. 3m
Part No.:
Model:
Cooling capacities:
with 35mm PU insulation
Power input (approx):
Current Consumption (Ah/h):
Weight:
6-60156
VD-02
6-60155
VD-01
6-60157
VD-07
30 litres max
50 litres max
35 watts
80 litres max
100 litres max
35 watts
100 litres max
130 litres max
35 watts
1.31
1.02
275 x 240 x 25mm
approx 1.0kg
1.46
1.17
300 x 270 x 110mm
approx 1.5kg
1.46
1.17
255 x 210 x 90mm
approx 1.5kg
COLD MACHINE SERIES 50
Designed for small refrigerator volumes (up to
approx. 130 litres) and for use in cool waters.
• Fully hermetic compressor with control electronics
and integrated low-voltage protection
• Low voltage cut-off
• Electronic reverse pole protection
6-60150
• Dynamically ventilated wire pipe condenser
Part No.:
• Two air-cooled units of different body shapes
Model:
• Three evaporator types, each designed to
Cooling capacities:
match the compressor performance
• Corrosion-resistant stainless steel
Voltage:
mounting plate
Power input:
• Impeccable operation in inclined position
Weight:
• Optional mains adaptors: 6-60009 or 6-60199 (as below) Dimensions (W x H x D):
COOLPOWER MPS 35
6-60151
6-60150
6-60151
CU-54
CU-55
130 litres max. normal refrigeration with direct evaporators
100 litres max. with cold accumulators
12/24V DC
12/24V DC
35 or 40 watts, depending on the evaporator type
approx 6.0kg
approx 6.5kg
386 x 165 x 130mm
220 x 160 x 220mm
COOLPOWER EPS 100
Mains adaptor for compressor coolers.
Mains adaptor for compressor coolers
Part No:
6-60009
Input voltage:
110 - 240V AC
Output voltage: 25V DC
Output power:
75 watts
Weight:
approx 0.75kg
Quality Features: Switch mode, automatic priority for mains operation
Battery voltage: 12/24V DC
Output current: 3A
Dimensions:
115 x 55 x 160mm (W x H x D)
Part No:
6-60199
Input voltage:
230V AC
Output power:
100 watts
Weight:
approx 0.7kg
Quality Features: Switch mode, automatic priority for mains operation
Battery voltage: 12/24V DC
Output current: 4A
Dimensions:
115 x 65 x 170mm (W x H x D)
Supplied with standard UK plug (generic image shown).
55
Dometic Waeco Cold
NEW RANGES
GALLEY EQUIPMENT
EVAPORATORS FOR COLD
MACHINE SERIES 80
• Flexible connection pipe approx.
2m (2.5m on VD-03 & VD-15)
• Continuously variable thermostat
for external installation with blue
turning dial & LED indicator in
white plastic housing (except VD15 where thermostat is integrated
in the evaporator housing).
• Electric supply cord approx. 3m
(except VD-15)
L-Evaporator VD-04
Standard Plate evaporator.
Standard Plate evaporator.
Standard L-shape evaporator.
Angle Evaporator VD-08
O-Evaporator VD-09
Fin Evaporator VD-03
Circulating Air
Evaporator VD-15
Standard angle evaporator.
O-evaporator for vertical and
horizontal installation.
Copper-aluminium fin evaporator
with large surface due to the
cooling fins, for vertical and
horizontal installation.
High-performance circulating air
evaporator in a white plastic housing,
with brushless fan, fast cooling
through circulating air operation.
Part No.:
Model:
Cooling capacities:
Dimensions (W x H x D) mm:
Weight:
6-60179
VD-18
6-60166
VD-05
6-60168
VD-04
6-60170
VD-08
6-60167
VD-09
6-60165
VD-03
6-60177
VD-15
100 litres max
150 litres max
45 watts
130 litres max
170 litres max
45 watts
130 litres max
170 litres max
45 watts
160 litres max
180 litres max
60 watts
160 litres max
180 litres max
60 watts
170 litres max 200 litres max
200 litres max 250 litres max
50 watts
60 watts
1.88
1.50
375 x 250 x 25
approx 1.5kg
1.88
1.50
375 x 350 x 25
approx 1.5kg
1.88
1.50
375 x 285 x 120
approx 1.5kg
2.50
2.00
465 x 270 x 360
approx 2.0kg
2.25
1.75
365 x 141 x 270
approx 2.0kg
1.88
1.46
380 x 230 x 82
approx 2.0kg
2.00
1.50
220 x 275 x 80
approx 2.0kg
Designed for small to medium refrigerator
volumes (up to approx. 250 litres) and for
use in warmer waters.
• Fully hermetic compressor with
control electronics and integrated
low-voltage protection
• Low-voltage cut-off
• Brushless DC fan
• Fin condenser
• Suitable for floor mounting
mounting plate
• Impeccable operation in inclined position
• Optional mains adaptors: 6-60009 or
6-60199 (see previous page)
56
6-60160
Part No.:
Model:
Voltage:
Cooling capabilities:
Power input:
Weight:
6-60161
6-60162
6-60160
6-60161
6-60162
CU-84
CU-85
CU-86
12/24V DC
12/24V DC
12/24V DC
70 litres max. deep-freezing
45 to 60 watts, depending on the evaporator type
6kg
6kg
6.5kg
386 x 160 x 130mm
220 x 160 x 220mm
220 x 230 x 177mm
SOME ITEMS ARE TO SPECIAL ORDER,
PLEASE CHECK FOR AVAILABILITY.
Dometic Waeco Cold
GALLEY EQUIPMENT
Standard plate evaporator with large surface.
• Flexible connection pipe approx. 2m
• Continuously variable thermostat (for
external installation, with blue turning knob
and LED indicator in white plastic housing),
• For refrigeration and deep-freezing
Air Circulating Deep-Freeze
Evaporator VD-16
Circulating Air Evaporator VD-14N
High-performance air circulating fin evaporator
in a transparent plastic housing.
• Self-sealing valve couplings, flexible
connection pipe approx. 2.5m
• Continuously variable deep-freeze thermostat
integrated in the evaporator housing
EVAPORATORS FOR COLD MACHINE SERIES 90
Part No.:
Model:
Cooling capacities (Litres):
Weight:
NEW RANGES
High-performance circulating air evaporator,
especially effective due to enlarged surface area.
• Radial fan with enhanced ventilation capacity,
continuously variable room thermostat for
optimal temperature distribution in the
refrigeration compartment.
• Ease of installation with self-sealing valve
couplings and flexible connection pipe
(approx. 2.5m)
• Sturdy, white plastic housing
6-60180
VD-21
6-60178
VD-16
6-60176
VD-14N
250 max (normal refrigeration) / 100 max (deep freezing)
300 max (normal refrigeration) / 150 max (deep freezing)
60 watts
130 litres max
200 litres max
60 watts
300 litres max
400 litres max
80 watts
2.50 (normal refrigeration) / 3.00 (deep freezing)
2.00 (normal refrigeration) / 2.00 (deep freezing)
1373 x 305 x 10
4kg
2.75
2.00
330 x 280 x 145
2.5kg
3.33
2.33
250 x 310 x 90
2kg
Designed for extra-large refrigerator
capacities (up to approx. 400 litres), for
deep-freeze cooling (up to approx. 200
litres) and for use in tropical waters.
• Equipped with a power-regulated high
performance compressor (25% more
cooling power)
6-60171
6-60172
Part No.:
• Three air-cooled units of different
Model:
body shapes
Voltage:
• Three evaporator types and one cold
accumulator with automatic programme Cooling capabilities:
controller, each designed to precisely
match the compressor performance
Power input:
Weight:
mounting plate
• Impeccable operation in inclined positions
• With AEO electronics
(Adaptive Energy Optimiser)
• Optional mains adaptor:
6-60010 - MPS 50 110/230V
power supply
6-60171
6-60172
6-60173
CU-94
CU-95
CU-96
12/24V DC
12/24V DC
12/24V DC
250 litres max. with cold accumulators
200 litres max. deep-freezing
60 to 100 watts, depending on the evaporator type
6kg
6kg
6.5kg
386 x 155 x 130mm
220 x 155 x 220mm
220 x 230 x 177mm
COOLPOWER 110-240V
MAINS ADAPTOR MPS 50
• Suitable for floor mounting
Mains connection for compressor
coolers Part No. 6-60010
Supplied with standard UK plug (generic image shown).
6-60173
Input voltage:
110 - 240V AC
Output voltage:
27V DC
Output power:
150 watts
Weight:
approx 1kg
Battery voltage:
12/24V DC
Output current:
6A
Dimensions (WxHxD): 120 x 70 x 200mm
57
Dometic Waeco Cooling
Units & Cup/Can Cooler
NEW RANGES
GALLEY EQUIPMENT
COLD ACCUMULATOR VD-06 FOR SERIES 80 OR SERIES 90 COLD MACHINE COOLING UNITS
• Stainless steel cold accumulator with integrated high-performance fin evaporator
• Continuously variable with TEC electronic controller
Use with:
For Series 80
Part No. 6-60169
Cooling capabilities:
For Series 90
with 35mm PU insulation 120 Litres Max
200 Litres Max
with 50mm PU insulation 200 Litres Max
250 Litres Max
65 watts
80 watts
Battery Load:
At one charge/discharge cycle per day = 10 watts/hour
Charging Time:
approx. 1.5 hours
Discharging Time:
8 to 18 hours (without compressor operation)
Pipe Length:
2.5m
380 x 300 x 62mm
TEC Electric Controller:
86 x 170 x 45mm
Weight:
5kg
COMPLETE COMPACT BUILD-IN COOLING UNIT CS-NC15
• Fully hermetic compressor with control electronics
and integrated low-voltage protection
• Low-voltage cut-off
• Brushless DC fan
• Fin condenser
• High-performance air circulating fin evaporator in
white plastic housing with brushless fan
• Rapid chill capability with circulating air operation
• Continuously variable thermostat (integrated in the
evaporator housing)
Part No.:
Model:
Cooling capacities:
Voltage:
Dimensions:
Weight:
6-60181
CS-NC15
200 litres max
250 litres max
12/24V DC
60 watts
2.00
1.50
See drawing
8.5kg
DOMETIC ESKIMO THERMOELECTRIC CUP/CAN COOLER
A refrigerated cup holder that can be installed in any convenient location to keep drinks
refrigerator-cold. Designed as a marine-tough open-top cylinder that replaces nearly any
existing standard 4 inch (102 mm) cup holder, it is large enough to fit a 20 ounce (591 ml)
water or soda bottle, and also accommodates a standard-size drinks can.
A specially angled bottom insert keeps bottles or cans in constant physical contact with
the sidewall cooling element. Part No. 6-60209
• Polished marine quality 316 stainless-steel trim ring
• Two blue LED interior lights
• Mounts into surfaces of various thicknesses
• DC powered premium thermoelectric Peltier cooling element
• Built-in drain
• Low-voltage cut off, high-heat cut off, and in-line fuse
58
Amps:
3.1A
Power:
12V DC
Weight:
0.96kg
Interior Diameter:
75mm
Cutout Diameter:
102mm
Dimensions (HxWxD): 174 x 137 x 174mm
Dometic Waeco
Thermoelectric Coolboxes
GALLEY EQUIPMENT
U26 DC THERMOELECTRIC COOLBOX 26L
• Double fan system
• Cooling performance up to
18º below the ambient
temperature
• Can be connected to 230V
using mains adapter 6-60098
• Will take 2 x 1L bottles
standing up
• Carrier handle serves to
either fix or support the lid
• Cable compartment in lid
Voltage monitor for
12 Volt applications.
• Protects the battery from
excessive discharging
• Automatic Cut-off at low battery voltage
• States indicated by LEDs
• Designed for universal use
Test marks: e-certified
(Automotive EMC Directive)
Part No. 6-60085
Part No.
Model
Gross Capacity:
Voltage:
Cooling Unit:
Insulation:
Colour:
Weight:
Dimensions (LxWxH):
COOLPOWER M50U
6-60085
U26 DC
26 litres
12 Volts DC
4 A peltier cell with 12V feed, cooling
max. 18°C below ambient temperature
High quality foam core (K-Iso system)
Metallic Blue
3.7kg
396 x 296 x 395mm
Part No:
6-60097
Cut-off voltage: 11.6V DC
Cut-in voltage: 12.8V DC
Current:
5A Max.
THERMOELECTRIC 230V AC - 12V DC
MAINS ADAPTOR
Ideal for use with T-26DC 12V
Thermoelectric coolbox (Part No. 6-60085).
Fitted with a cigarette
lighter socket for 12V
DC connectors.
Part No:
6-60098
Input voltage:
220-240V AC
Continuous load:
5A/60W
Weight:
0.5kg
Output voltage:
12V DC
Dimensions (HxWxD): 170 x 115 x 65mm
Test marks:
GS, CE
For optional mains adaptor use Part No. 6-60098
WAECO COOLFUN CX 30
THERMOELCTRIC COOLBOX 29L
WAECO MOBICOOL
G35 THERMOELCTRIC
COOLBOX 35L
• Dual voltage system, auto-switch and
integrated ABS active battery security
• Easy access door-in-door
bottle compartment
• Works both upright and
lying down
• Cooling and heating function
• Fits 2-litre bottles standing
• Removable divider grid
• Fold-away side handles for
easy carrying
Part No.:
Model:
Storage volume approx:
Connections:
Cooling below ambient temp:
Heating:
Insulation:
System:
Colour:
Dimensions (L x W x H):
Weight:
NEW
6-60087
G35
35 Litres
12V DC / 230V AC
Max 18ºC approx
65ºC max
PU foam all round
Thermoelectric (Peltier system)
Blue
540 x 350 x 445mm
8.1kg
NEW
• It cools up to 18°C below ambient
temperature
• or it can keep lunch warm up
(heats up to + 65°C)
• 12/230V connection as standard
• Capacity: approx 29 litre
• Carrier bar also functions as lid
support and lid lock
• Cable compartment integrated
within the lid
• Vertical space for 2-litre bottles
Part No.:
Model:
Storage volume approx:
Connections:
Consumption @ 12V DC:
Consumption @ 230V AC:
Energy class:
Cooling below ambient temp:
Heating:
Insulation:
System:
Material & Colour:
Weight:
Test Marks:
6-60093
CX 30
29 Litres
12V DC / 230V AC
47 Watts
55 Watts
A++
Max 18ºC approx
+65ºC approx
PU foam all round
Thermoelectric (Peltier system)
PP, Dark / Pale Grey
396 x 444 x 296mm
4.3kg approx
TÜV/GS, e-certified (Automotive EMC Directive)
59
Dometic Waeco Portable
Refrigeration
GALLEY EQUIPMENT
Part No:
Gross Capacity:
Voltage:
Power Consumption:
TROPICOOL TC-35FL
THERMOELECTRIC COOLER
6-60084
33 Litres approx
12-24V DC and 230V AC
approx. 46W at 12V DC
approx. 50W at 24V DC
approx. 64W at 230V AC
Average Running Time: 35% at +20ºC ambient temp.
Temperature Range:
Cooling: +1ºC to +15ºC (up to 30ºC below
the ambient temp); heating: +50ºC to +65ºC
Colour:
Dark grey / pale grey
Weight:
10.0kg
Dimensions (LxWxH):
550 x 376 x 460mm
Test marks:
CE, TÜV/GS, e-approved to 2006/28/EC
(Automotive EMC Directive)
TC special electronics: 7- stage electronic
thermostat with LED indicators, memory
function, ON/OFF and cold/warm option
activated with soft touch operating panel,
intelligent power-save circuit
Integrated mains supply unit with
priority circuit, outstanding cooling
performance, magnetic switch to deactivate
the interior fan when box is opened,
detachable lid with snap lock closure, handy
carrying grips, vertical space for 2 x 1 litre
bottles, adjustable grid divider
Part No. 6-60084
WAECO COOLFREEZE CDF 18 & CDF 26 PORTABLE COOLER/FREEZERS
Fully hermetic compressor with integrated control electronics, low-voltage protection/electronic
fuse, automatic reverse pole protection, electronic thermostat.
CDF 18
• The energy efficiency box: improved insulation makes
running times shorter: just 0.38 Ah/h at an inside
temperature of +5°C and +20°C outside temperature
• Refrigeration and deep-freezing
• Detachable or fold-up lid
• Sturdy handle
CDF 26
• Super-slim body – minimal space requirements
• Refrigeration and deep-freezing
• Lift-out wire basket
• LED interior light
• Detachable lid
NEW
NEW
Optional Accessories:
Coolpower 110-240V Mains Adaptor MPS 35
Part No. 6-60009
Coolpower 230V Mains Adaptor EPS 100
Part No. 6-60199
Part No:
Model:
Storage volume (approx):
Connections:
Temperature range:
Current consumption (AH/h) at 12V
at +20ºC
at +30ºC
Ambient & interior temperature:
Insulation:
Weight (approx):
Test Marks:
60
6-60139
CDF 18
18 Litres
12/24V DC
+10ºC to -18ºC
35W
6-60138
CDF 26
21 Litres (inc. 4 litre crisper)
12/24V DC
+10ºC to -18ºC
35W
0.38
0.44
0.64
0.67
+5ºC
+5ºC
PU foam all round
PU foam all round
11.5kg
12.7kg
465 x 414 x 300
550 x 425 x 260
TÜV/GS, e-certified (Automotive EMC Directive)
UNIVERSAL FIXING KIT
For fastening of
Coolfreeze
cooler CDF26.
Part No. 6-60149
Dometic Portable &
Cassette Toilets
TOILETS & SANITATION
NEW RANGES
DOMETIC 966 PORTABLE TOILET
• Durable design - high-density polyethylene construction provides
strength and toughness
• Scratch-resistant matt finish which is easy to keep clean - looks
new for years
• Comfortable adult-size seat and lid provides both comfort & safety
• Easily accessed side latches to lock the tank firmly in place
• One-piece tanks and double-sealed valves prevent leaks & odours
• Large discharge opening empties detachable holding tank in
one motion
• 19 Litre holding tank - enough for 30-50 uses
• Colour: Platinum
Part No:
Fresh Tank Capacity:
Waste Tank Capacity:
Dimensions (L x W x D):
Weight:
9-51990
9.8 Litres
18.9 Litres
394 x 368 x 419mm
5.9kg
DOMETIC SaniPottie® 972 & 976 PORTABLE TOILETS
• Portable toilet in two sizes and two colours
• 8.7 litre flush water tank – sufficient for 27 flushes
• Push-button operation
• Strong 360° pressure flush for effective cleaning
• Tank level indicator protects against overflow
• Ingenious disposal system: extra-long, pivoting spout
and vent openings for clean, splash-free discharge
• Spare holding tanks and fixing kit as accessories
Part No:
Model:
Colour:
Holding Tank Capacity:
Flush Water Tank Capacity:
Weight:
9-52000
9-52000
972B
Beige/White
9.8 Litres
8.7 Litres
333 x 317 x 387
5.4kg
9-52011
9-52001
972G
Grey/White
9.8 Litres
8.7 Litres
333 x 317 x 387
5.4kg
9-52010
976B
Beige/White
18.9 Litres
8.7 Litres
333 x 387 x 387
5.9kg
9-52011
976G
Grey/White
18.9 Litres
8.7 Litres
333 x 387 x 387
5.9kg
Grey waste tank 9.8L
Grey waste tank 18.9L
Portable toilet fixing kit
Part No.
9-52009
9-52019
9-52020
DOMETIC CTS 4110 BUILT-IN CASSETTE TOILET
• Cassette toilet with high-quality, scratch-resistant
ceramic inlay
• Waste water tank capacity: 19 litres
• Colour: white
• Weighs up to 30% less than a solid ceramic toilet
• 15% more flushing power because of optimised
vacuum breaker
• Anatomically optimised bowl design
Part No:
Waste Tank Capacity:
Voltage:
Power Input:
Weight:
9-52052
19 Litres
12V DC
max. 5A for external pump
382 x 672 x 530mm
12kg
DOMETIC SANITATION TABS
PowerCare Tabs are a highly-effective additive for the waste holding tank,
GreenCare Tabs are the environmentally friendly version. Both break down
waste into liquid and prevent unpleasant odours.
CTS 4110 RENEW KIT
Just like new - the replacement
set works wonders when the
Dometic toilet is showing its age
or has been installed by the
previous vehicle owner. Instead
of replacing it completely, only
the heavily used parts are
replaced – which reduces the
work and saves money!
Part No. 9-52055
Complete set consists of:
• Toilet seat incl. lid
• Flush ring cover
• Waste holding tank
• Sanitation additives
(Dometic PowerCare Tabs)
• No spills
• Tabs in soluble film
• Pre-measured dosage
• Add 1 tab + 3L of
water for a 20L tank
• For all portable toilets
• Easy storage
• 16 tabs per tub
Part No. 9-52105
Part No. 9-52106
61
Dometic Masterflush &
Sealand Traveller Toilets
NEW RANGES
TOILETS & SPARES
DOMETIC MASTERFLUSH MF7120 FRESHWATER TOILET
Electric macerator toilet with 360° ORBIT base technology.
• Maximum comfort, minimum use of space
• Residential-size seat, a deeply sloped
bowl, and an aesthetically appealing
round front
• 360° ORBIT installation - means the
base can be fixed to any angle to the
bowl to avoid walls or adapt to diverse
bathroom layouts
• Its small footprint fits the plumbing points of
most commonly used boat toilets
• Full, flat back ledge hides all plumbing when
viewed from above
• Low water and energy consumption
• Highly effective macerator system 10-blade stainless steel cutting wheel pulverizes waste for optimum effluent flow,
minimising the chance of odour permeation
DOMETIC SEALAND 311 TRAVELLER
GRAVITY FLUSH TOILET
• Power flush, swirl-jet bowl rinse
action ensures a cleaner rinse
• Innovative drop away ball and
valve system
• Full-size, residential-style seat
• Two-bolt installation with quick-access
water connection
• Hands-free foot pedal operation with
adjustable water level
• Easy serviceability with modular components
Part No:
Water Supply:
Material:
Colour:
Weight:
9-52300
Freshwater
Seat: Plastic, Bowl: Porcelain
White
378 x 387 x 483mm
9.75kg
Part No:
9-52070
9-52071
Voltage:
12V DC
24V DC
Current Consumption:
20A
10A
Fuse:
25A
15A
Wiring:
2mm (up to 7.6m total circuit)*
Water Supply:
Freshwater
Material:
Seat: Wood, Bowl: Ceramic
Colour:
White
375 x 381 x 483mm
Weight:
15.9kg
*Consult ABYC guidelines for additional information
Integrated electric
water valve
TRAVELLER TOILET SPARES
Description
Part No.
1
⁄2 Clamp & Ring Kit (for 911/910)
9-52312
Base Gasket Kit (for 911/910 & 511/510) 9-52313
Fixing Bolt Kit (for 911/910 & 511/510)
9-52314
Water Valve Kit (for 911/910 & 511/510) 9-52315
Teflon Bowl Seal Kit (for 911/910 & 511/510) 9-52316
Vacuum Breaker Kit (for 911/910)
9-52317
1
⁄2 Ball/Shaft/Spring Cartridge Kit
9-52318
(for 911/910 & 511/510)
Toilet Seat Lid c/w hinges (for 910/911) 9-52319
Floor Mounting Flange (for 311/310)
9-52320
Bowl Seal Kit (for 311/310)
9-52330
Base Gasket Kit (for 311/310)
9-52331
Toilet Seat Lid Complete White (for 311/310) 9-52332
Water Inlet Valve Complete (for 311/310) 9-52333
9-52312
9-52313
9-52314
9-52315
9-52316
9-52320
9-52317
9-52318
9-52330
9-52319
9-52333
9-52332
62
9-52331
Dometic Waeco
SinePower Inverters
ELECTRICAL
WAECO SinePower PURE SINE WAVE INVERTERS - MSI 212 & MSI 412
The MSI 212 and MSI 412 are the two most compact and low priced WAECO SinePower models.
They are recomended for where there is just one single, “modest” consumer unit on board which
requires 230 volt AC voltage to run such as a TV, DVD player or mobile phone charger.
• Extremely slim design, lightweight
• Series-standard USB interface
• Easily accessible socket
integrated in the upper housing
• Outstanding price - performance
ratio
• MSI 212 (8-70300) has a DC
cigarette lighter plug supplied
• Test Mark: e-certified (Automotive
EMC Directive)
Part No.
8-70300 (12V)
8-70302 (12V)
Model:
MSI 212
MSI 412
Input Voltage:
12V DC (11-15V) 12V DC (11-15V)
Output Voltage / Curve:
230V AC / pure sine wave
Output Frequency:
50Hz
50Hz
No-Load Current Input:
0.6A
0.6A
Continuous Output:
150W
350W
Peak Power:
300W
700W
Enrgey efficiency up to:
90%
90%
Dimensions (WxHxD) mm: 124 x 49 x 199
124 x 49 x 199
Weight (approx):
0.82kg
0.82kg
Type of Protection:
equivalent to IP21
8-70300
8-70302
WAECO SinePower PURE SINE WAVE INVERTERS WITH VERY HIGH PEAK OUTPUT LEVELS
• Use 12V or 24V battery current to produce the
same 230V AC power available from a home
wall outlet.
• Problem free operation of all kinds of devices,
even highly sensitive 230V devices such as
computers
• Sufficient capacity to easily accommodate high
starting currents generated by connected
appliances
• Simple installation, super-compact design and
lightweight
• Test Mark: e-certified (Automotive EMC Directive)
If you don‘t require a mains priority circuit you can choose from these three particularly
cost-effcient SinePower models.
8-70304
8-70305
8-70306
8-70307
8-70308
8-70309
These three versions (below) of the SinePower Inverter feature a mains priority circuit with voltage
synchronisation. Models 2300/3500 can be used in parallel with up to 3 identical units using an interface cable.
Optional remote on/off
inverter control panel
Includes 7.5M cable.
Part No. 8-70082
NEW
panel with LED display.
Part No. 8-70081
8-70310
NEW
8-70312
8-70313
WITHOUT Mains Priority Circuit
Part No.
Model:
Nominal Input Voltage:
Output Frequency:
No-Load Current Input:
Standby current consumption:
Continuous Output:
Peak Power:
Enrgey efficiency up to:
Dimensions (WxHxD)mm:
Weight (approx):
Optional Remote Control:
Type of Protection:
8-70314
WITH Mains Priority Circuit
8-70304 (12V)
8-70306 (12V)
8-70308 (12V)
8-70310 (12V)
8-70312 (12V)
8-70305 (24V)
8-70307 (24V)
8-70309 (24V)
–
8-70313 (24V)
MSI 912
MSI 1312
MSI 1812
MSI 1812T
MSI 2312T
MSI 924
MSI 1324
MSI 1824
–
MSI 2324T
12V DC (10.5-16V) 12V DC (10.5-16V) 12V DC (10.5-16V) 12V DC (10.5-16V) 12V DC (10-16V)
24V DC (21-32V) 24V DC (21-32V)
24V DC (21-32V)
–
24V DC (20-32V)
230V AC / pure sine wave
50Hz
50Hz
50Hz
50Hz
50Hz
1.8 / 1.0A
2.1 / 1.1A
2.1 / 1.1A
2.1 / 1.1A
3.1 / 1.5A
0.5 / 0.3A
0.5 / 0.3A
0.5 / 0.3A
0.5 / 0.3A
1.1 / 0.7A
900W
1300W
1800W
1800W
2300W
1600W
2400W
3200W
3200W
4000W
92%
92%
92%
92%
92%
197.5 x 94.3 x 291 197.5 x 94.3 x 324.6 197.5 x 94.3 x 376 197.5 x 94.3 x 406 283 x 128.4 x 436
3kg
4kg
5kg
6.5kg
7.5kg
8-70081/2
8-70081/2
8-70081/2
8-70081/2
8-70081/2
equivalent up to IP 21
Generic images shown. All products above
supplied with standard UK socket.
8-70314 (12V)
–
MSI 3512T
–
12V DC (10-16V)
–
50Hz
2.7 / 1.3A
1.1 / 0.7A
3500W
6000W
92%
283 x 128.4 x 436
9kg
8-70081/2
63
Dometic Waeco
PerfectPower Inverters
ELECTRICAL
WAECO PerfectPower MODIFIED SINE WAVE INVERTERS
150W to 550W
• Turns 12 or 24VDC to mains 230 V AC modified
sine wave
• Also suitable for appliances with PFC
(Power Factor Correction)
• Reverse pole protection by exchangeable fuse
• External on/off switch
• Individually adjustable clip-on mounts
• DC cigarette lighter plug supplied with 8-70230 & 8-70231
8-70230
8-70230 is blister packed
1000W & 2000W
• Turns 12 or 24VDC to mains 230V AC
modified sine wave
• High peak output for especially powerful
appliances
• Integrated mains priority circuit
• Overload and short circuit protection
• Individually adjustable clip-on mounts
• External on/off switch
• Includes connection socket for optional
remote control 8-70082
• IEC mains plug and socket leads included
for priority power input and inverter output
8-70231
8-70238
8-70234
8-70246
8-70242
WITH Mains Priority Circuit
WITHOUT Mains Priority Circuit
Part No.
Input Voltage:
Model:
8-70230 (12V)
8-70231 (24V)
12VDC (10-15V)
24VDC (22-30V)
815-012PP/UK/HK
PP154
Output Frequency:
No-Load Input Current:
Continuous Power:
Peak Power:
Energy Efficiency:
Dimensions (WxHxD):
50Hz
<0.15A (12V), 0.25A (24V)
150W
350W
Up to 90%
105 x 57 x 140mm (12V)
129 x 71 x 177mm (24V)
Weight:
0.84kg approx
Type of Protection:
Equivalent to IP21
Optional Remote Control:
–
8-70234 (12V)
8-70235 (24V)
12VDC (11-15V)
24VDC (22-30V)
PP402
PP404
50Hz
0.25A
350W
700W
Up to 90%
inverter control panel.
Part No. 8-70082
8-70238 (12V)
8-70242 (12V)
–
8-70243 (24V)
12VDC (11-15V)
12VDC (11-15V)
–
24VDC (22-30V)
PP602
PP1002
–
PP1004
230V AC / modified sine wave
50Hz
50Hz
0.25A
<0.8A
550W
1000W
1100W
2000W
Up to 90%
85%
8-70246 (12V)
8-70247 (24V)
12VDC (11-15V)
24VDC (22-30V)
PP2002
PP2004
50Hz
<1.5A
2000W
4000W
85%
129 x 71 x 192mm
129 x 71 x 237mm
176 x 95 x 338mm
176 x 95 x 443mm
0.99kg approx
Equivalent to IP21
–
1.4kg approx
Equivalent to IP21
–
3.5kg approx
Equivalent to IP21
8-70082
5kg approx
Equivalent to IP21
8-70082
WAECO PerfectBattery BATTERY CONDITIONER
• Three functions in one unit: conditioning,
charging, back-up mains adaptor
• For service and maintenance of all 6-volt and
12-volt lead batteries
• Simple connection to the cigarette lighter socket
or with battery clamps included in the delivery kit
• Short-circuit and reverse pole protection
• Conditions batteries with a capacity from
10Ah to 150Ah
• Charges batteries with a capacity from
10Ah to 30Ah
• CE mark
64
Part No
Model:
Input voltage
Input voltage range
Input current
Power Consumption
Charging voltage range
Maximum charging current
Charging Indicator
Dimensions (WxHxD)
Weight
Length, mains adaptor cable
Length, battery cable
8-70010 (12V)
BC 100
230 Volts
180 to 253 Volts
0.1A
20 watts
13.0 to 13.8 Volts
1 Amp
3 LEDs
70 x 100 x 60mm
0.45kg
approx. 2m
approx. 2m
8-70011 (6V)
MBCC 200
230 Volts
180 to 253 Volts
0.1A
20 watts
6.5 to 7.0 Volts
2 Amp
3 LEDs
70 x 100 x 60mm
0.45kg
approx. 2m
approx. 2m
Dometic Waeco
PerfectCharge Chargers
ELECTRICAL
WAECO PerfectCharge IUOU
AUTOMATIC BATTERY CHARGERS
• Faster full-capacity charging times
• Faster installation
• Suitable for all wet, gel and AGM batteries
• Surprisingly low weight and very compact
design, offering problem-free installation
even in restricted spaces
8-70220
8-70221
8-70222
• 6-stage charging characteristic for fast,
gentle battery charging
• Two or three charging ports for
simultaneously charging multiple batteries
• Remote control and temperature sensor
options available
8-70226
8-70224
NEW
8-70223
Part No.:
8-70220
Model:
MCA 1215
Charge Outputs:
1+1
Input Voltage:
90V – 260V
Frequency:
50 – 60 Hz
End of Charging Voltage:
14.4 / 14.7V
Float Charging Voltage:
13.8V
Recommended Battery Capacity (Ah):
40 – 170
UO Phase Ltd at (h):
8 or 16
Energy Efficiency Up To:
92%
Charging Current:
15A
Operating Temperature:
–20°C to +50°C
Sleep Mode:
Battery Types:
Dimensions (W x H x D mm):
179 x 63 x 238
Weight (kg):
1.6
Type of Protection:
Equivalent to IP 21
NEW
8-70225
8-70221
8-70222
8-70226
MCA 2415
MCA 1225
MCA 2425
2
2+1
3
90V – 260V
90V – 260V
90V – 260V
50 – 60 Hz
50 – 60 Hz
50 – 60 Hz
28.8 / 29.4V
14.4 / 14.7V
28.8 / 29.4V
27.6V
13.8V
27.6V
40 – 170
75 – 300
75 – 300
8 or 16
8 or 16
8 or 16
92%
92%
92%
12.5A
25A
25A
–20°C to +50°C
–20°C to +50°C
–20°C to +50°C
Using the remote control or DIP switch on the device
Lead-acid batteries (liquid, gel, AGM)
179 x 63 x 238
179 x 63 x 238
208.5 x 75 x 283
1.6
1.7
2.9
Equivalent to IP 21 Equivalent to IP 21
Equivalent to IP 21
Part No.:
8-70224
8-70225
Model:
MCA 1250
MCA 1280
Charge Outputs:
3
3
Input Voltage:
90V – 260V
90V – 260V
Frequency:
50 – 60 Hz
50 – 60 Hz
End of Charging Voltage:
14.4 / 14.7V
14.4 / 14.7V
Float Charging Voltage:
13.8V
13.8V
Recommended Battery Capacity (Ah):
150 – 600
200 – 800
UO Phase Ltd at (h):
8 or 16
8 or 16
Energy Efficiency Up To:
92%
92%
Charging Current:
50A
80A
Operating Temperature:
–20°C to +50°C
–20°C to +50°C
Sleep Mode:
Using the remote control or DIP switch on the device
Battery Types:
Lead-acid batteries (liquid, gel, AGM)
Dimensions (W x H x D mm):
208.5 x 75 x 283
208.5 x 75 x 303
Weight (kg):
3.1
4
Type of Protection:
Equivalent to IP 21
Equivalent to IP 21
8-70223
MCA 1235
2+1
90V – 260V
50 – 60 Hz
14.4 / 14.7V
13.8V
100 – 400
8 or 16
92%
35A
–20°C to +50°C
179 x 63 x 274
1.9
Equivalent to IP 21
MCA-RC1 Wireless Remote
Control for IUOU Chargers.
Part No. 8-70228
MCA-TS1 Temperature
Sensor for IUOU Chargers.
Part No. 8-70229
65
Dometic Waeco Battery
Charger, DCDC Converters
ELECTRICAL
WAECO PerfectCharge IU 812 BATTERY CHARGER 8A 12V
• Compact design
• Advanced switch mode
for high efficency
• Suitable for Wet, Gel
and AGM batteries
• Can be used as mains adapter
• Overload and short circuit protection
Part No.:
8-70020
Model:
IU 812
Battery voltage:
12V
Maximum charge current:
8A
Input voltage range:
180 - 253V AC
End of charging voltage:
14.4V
Float charging voltage:
13.6V
Maximum battery capacity:
100Ah
Operating temperature:
0 to +50ºC
Dimensions (WxHxD) mm: 120 x 70 x 200
Weight:
0.9kg
WAECO PerfectCharge IU DC-DC CHARGING CONVERTERS
Sensitive 12 volt appliances depend on a constant, stable
voltage that the onboard battery cannot always supply.
Simply connect a PerfectCharge IU charging converter between
the power sources: it stabilises voltage and compensates for
over and under voltage in the range from 8 - 16 volts.
By increasing the charging voltage, it also ensures complete
charging of supply batteries during a cruise.
Part No:
Model:
Input voltage:
Output voltage:
Energy Efficiency:
Charging current:
Weight:
Dimensions (WxHxD):
8-70110
DC 08
12V (18-16V)
14.2 ± 0.1V
87%
8A
0.75kg
115 x 70 x 100mm
• Ideal for voltage stabilisation and for
8-70110
charging the supply battery while cruising
• High efficiency
• Electrically isolated input and output voltage
8-70113
DC 20
12V (18-16V)
14.2 ± 0.1V
87%
20A
1.2kg
115 x 70 x 160mm
8-70116
DC 40
12V (18-16V)
14.2 ± 0.1V
87%
40A
2.1kg
115 x 70 x 270mm
8-70113
8-70116
WAECO PerfectPower DC-DC VOLTAGE CONVERTERS
If the 24 volt on-board battery powers the 12 volt navigation
system and the 24 volt coffee maker works problem-free with
a 12 volt supply, there’s bound to be a PerfectPower voltage
converter somewhere along the line.
This product range satisfies the highest standards with
respect to voltage stability and operating safety. Also functions
as a high-quality IU charger, can be operated in parallel mode.
8-70120
• Ideal for sensitive appliances
• Electrically isolated input and
output voltage
• Can also be used as battery
chargers
• To increase capacity,
several converters can
be used in parallel
8-70122
Part No:
Model:
Input voltage:
Input voltage range:
Output current:
Output voltage:
Energy Efficiency:
Weight:
Dimensions (WxHxD):
66
8-70118
8-70128
8-70124
8-70118
DCDC 10
12V DC
8 to 16 Volts DC
10A
27.6 ± 0.1 Volts
87%
1.2kg
115 x 70 x 155mm
8-70120
DCDC 20
12V DC
8 to 16 Volts DC
20A
27.6 ± 0.1 Volts
87%
1.9kg
115 x 70 x 240mm
8-70122
DCDC 10
24V DC
20 to 32 Volts DC
10A
27.6 ± 0.1 Volts
87%
1.0kg
115 x 70 x 140mm
8-70124
DCDC 20
24V DC
20 to 32 Volts DC
20A
13.8 ± 0.1 Volts
87%
1.2kg
115 x 70 x 155mm
8-70128
DCDC40
24V DC
20 to 32 Volts DC
40A
13.8 ± 0.1 Volts
87%
1.9kg
115 x 70 x 240mm
TREM Miscellaneous
Boat Equipment
TREM 3 STEP
S/S BOLT-ON
BOARDING LADDER
TREM ANCHOR CONNECTORS
Stainless steel pivoting anchor connector.
Chain
6-8mm
8-10mm
Manufactured in stainless steel.
Suitable for rubber boats transom.
Pipe Ø: 25mm
Width: 220mm
Length: 740mm
Weight: 2.3kg
Part No. 6-25041
Mouth
15mm
22mm
Part No.
N-60164
N-60165
Stainless steel double pivoting
anchor connector.
Chain
6-8mm
8-10mm
TREM SUPPORTS
Part No.
N-60166
N-60167
For Self Inflating Lifecraft
Complete with belt with fastening buckle.
Can be applied both in
horizontal & vertical position.
Width: 42cm+
Part No. 6-25619
TREM HORSESHOE
LIFEBUOY
Made of cellular foam with highly
resistant PVC cover.
Part No.
6-25532
6-25533
TREM OBJECT
COMPARTMENT / GLOVEBOX
ABS plastic complete with lock & 2 keys.
Part No. 6-20095
Dimensions:
Inner: 315 x 100 x 165mm
Outer: 344 x 140 x 190mm
Cut-out: 300 x 105 x 168mm
Weight: 55g
Buoyancy
15kg
15kg
Colour
Orange
Yellow
For more TREM products see
our Section 6 Catalogue
TREM LED ROUND NAVIGATION LIGHT For boats up to 20m
• Polycarbonate body
• UV resistant lens
• IP56 ingress rating
• Fitted with LED fitment
• Voltage range: 6-32V
• RINA approved product
Port
Description Visibility Black
12V Port
112.5º 8-30940
12V Starboard 112.5º 8-30941
12V Masthead 225º
8-30943
12V Stern
135º
8-30944
Starboard
Masthead
White
8-30945
8-30946
8-30948
8-30949
Stern
Chrome
8-30950
8-30951
8-30953
8-30954
TREM ALL ROUND LED
NAVIGATION LIGHTS
Suitable for boats up to 20m
• Base mount ABS body with UV resistant lens
• IP56 Ingress rating
• 360º all round LED fitment
• Voltage range 6 -36V
• RINA approved product
Part No. 8-30980
Part No. 8-30984
67
CAN-SB Lifebuoys,
Hatches & Storage Boxes
CAN-SB PONZA LIFEBUOY
Container:
H: 80cm
W: 85cm
D: 28cm
6-99027
O ring life buoy manufactured in high
density polythene filled with
polyurethene closed cell foam,
reflecting tape and rope.
• SOLAS & RINA approved
Part No. 6-99025
Specifications:
External Diameter:
Internal Diameter:
Weight:
Total height of post
& container 173cm
740mm
435mm
2.5kg
PONZA LIFEBUOY ACCESSORIES
Description
Container only wall mount / post mount
Floor mount post for container*
Orange rope 8mm x 30m
Lifebuoy & rope
not included.
6-99029
Part No.
6-99027
6-99028
6-99029
Base
Post
ø 12mm
40 x 60mm
6-99028
Height:
150cm
300 x 300mm
*Fixings not included
6-20062
CAN-SB INSPECTION PLATE
6-20050
6-20051
6-20060
Part No.
6-20060
6-20062
• In white plastic.
• Latching lid
Open Dia.
185mm
235mm
External Dia.
265mm
315mm
Hole Dia. Cutout
215mm
265mm
6-20052
CAN-SB HATCHES
6-20053
with removeable hinge.
In white plastic. Opens 180º.
Part No.
6-20050
6-20051
6-20052
6-20053
Opening Size*
190 x 290mm
274 x 523mm
290 x 290mm
375 x 428mm
External Size
270 x 370mm
357 x 606mm
374 x 374mm
460 x 515mm
Cut Out Size
195 x 298mm
283 x 531mm
298 x 298mm
384 x 437mm
*excluding latch
CAN-SB STORAGE BOXES
Part No.
6-20085
6-20088
Description
Plastic Deck Storage Box with door
Plastic Fire Extinguisher* Holder with door
6-20085
Internal W x H x D
120 x 370 x 112mm
120 x 370 x 112mm
* Fits fire extinguishers 6-99051 & 6-99052
68
6-20088 Closed
External W x H x D
180 x 430 x 130mm
180 x 430 x 130mm
Cut Out Size
124 x 374mm
124 x 374mm
6-20088 Open
Fitted Depth
110mm
110mm
CAN-SB Transom Fittings
Attwood Ski Mirror
6-22917
6-22918
CAN-SB EXPANDING PLUGS
Part No.
6-22917
6-22918
6-22919
Description
Expanding Plug, Black
Size*
40mm
35mm
22.5mm
* Pre expanded size
6-22919
6-22922 / 6-22923
6-22924 / 6-22925
CAN-SB PLASTIC TRANSOM DRAIN SOCKETS
Part No.
6-22922
6-22923
6-22924
6-22925
Description
Plastic Transom Drain Socket, White
CAN-SB PLASTIC TRANSOM DRAIN CAPS
Length
115mm
111mm
115mm
175mm
ID
40mm
40mm
40mm
40mm
OD
70mm
74mm
70mm
75mm
For Hose
45mm
50mm
–
–
CAN-SB TELESCOPIC
TRANSOM DRAIN SOCKET
White Plastic Transom Drain Socket
Inner Diameter: 45mm
Outer Diameter: 70mm
Length: 195mm
For Hose: 50mm
Part No. 6-22928
Plastic Drain Cap with non return valve
(for 6-22928).
OD: 81mm Part No. 6-22926
Plastic Drain Cap with non return valve
(for 6-22928).
OD: 90mm Part No. 6-22927
ATTWOOD CHROME SKI MIRROR
Shatterproof, 180° convex mirror eliminates blind spots. Mirror is compact and constructed of lightweight chrome plated zinc
ZAMAK. Adjusts to any position up-and-down or side-to-side, then secures in desired location.
Dimensions:
Width:
Height:
Features
185mm (7 ⁄16 ")
63.5mm (21⁄2 ")
5
• Provides 180º rear vision eliminating blind spots
• Die-cast zinc mirror with Perma-Plate® chrome finish
• Universal mount installs on dash or windshield
Part No. 6-31990
• Windshield mounting bracket can be used on windshield
extrusions up to 19mm (3⁄4 '') thick
69
Propeller Bags &
Fishing Rod Holders
PROPELLER BAGS
Five sizes of orange PVC propeller bags with a draw string at the neck. To comply
with the law these must be placed over the propeller when the boat is being trailed.
Part No.
6-20900
6-20901
6-20902
6-20903
6-20904
Size
Small
Medium
Large
XL
XXL
Dimensions
40 x 40cm
50 x 50cm
63 x 63cm
67 x 65cm
92.5 x 77.5cm
For engines
Up to 6hp
6hp to 40hp
Large motors inc outboards
FISHING ROD HOLDERS
WHITE PLASTIC
FIXED ROD
HOLDER
Inner diameter: 40mm
45° angle
Part No. 6-22750
S/S 45° FIXED
ROD HOLDER
S/S FLUSH MOUNT
ROD HOLDER
SIDE/WALL MOUNT
ROD HOLDER
With black hole cover
45° angle
Part No. 6-22752
Black plastic inner & flange
Flange: 88 x 115mm
Overall length: 210mm
90° angle
Part No. 6-22754
In 316 stainless steel with
white PVC top sleeve
Overall length: 254mm
Inner tube dia.: 48.8mm
Part No. 6-22760
SINGLE WALL
MOUNT ROD
HOLDER
Part No. 6-22761
See Section 6 for
more safety products &
chandlery equipment.
70
Ritchie Navigation
COMPASSES
RITCHIE VOYAGER® F-83, 3'' Dial (Flush Mount)
• 3" CombiDamp flat dial
• Easily installed (download a template from www.ritchienavigation.com)
• Exclusive built-in 12V green night illumination
• Built-in compensators to easily adjust for deviation
• Scientifically matched sapphire jewel & hardened steel pivot dial movement
• Powerful Directiveforce magnets for fast heading lock-on
• Movable sun shield
• High temperature composite construction for
extended operating range
• 100% repairable
• Exclusive 5-Year Ritchie warranty
• Protective cover available: V-83-C
(Part No. 16-80081-1)
Dial Size:
Design:
Night Lighting:
Compensators:
Mounting Hole:
Warranty:
Approx. Shipping Wt:
3" (76mm)
Combi Dial
12V Green
Built-in
43 ⁄16 '' (107mm)
5-Year
1lb. 4oz (567g)
The Wheelmark approval is for Lifeboat and Rescue boat
compasses. These compasses are also suitable for
sailboats, power boats and motor sailing vessels.
The -WM suffix signifies type approval and compliance with
the Navigation requirements of Marine Equipment Directive
(MED) 95/98/EC and the last modification by Directive 2011/75/EU.
Wheelmark certificates can be downloaded from www.ritchienavigation.com
6-80088-WM
Model
F-83
F-83W
Colour
Black
White
Mount
Flush
Flush
Part No.
6-80088-WM
6-80089-WM
6-80089-WM
RITCHIE NAVIGATOR™ FNW-201 41 ⁄2 '' Dial (Flush Mount)
• 41⁄2 " PowerDamp flat card dial with large numerals
• Easily installed, fits 4.75" (121mm) to 5.125" (130 mm)
mounting hole, (download a template from
www.ritchienavigation.com)
• Scientifically matched sapphire jewel & hardened steel pivot dial
movement
• Powerful Directiveforce magnets for fast heading lock-on
• 12V green LED lighting standard
• Movable sun shield
• 45 degree lubber lines
Dial Size:
• High temperature composite construction for
Design:
extended operating range
Night Lighting:
• 100% repairable
Compensators:
• Exclusive 5-Year Ritchie warranty
Mounting Hole:
• Custom fitted protective covers to special order
Warranty:
• Protective cover available: N-203-C
Approx. Shipping Wt:
(Part No. 16-80170-1)
Model
Colour
FNW-201 White
Mount
Flush
Part No.
6-80171
4 1⁄2 " (114mm)
Flat-card or Combi Dial
12V Green
Built-in
51⁄8 '' (130mm)
5-Year
2lb. 10oz (1.19kg)
6-80171
Black version also available - see Section 6 for details
6-80170
See Section 6 for Ritchie Compasses
71
Turnbutton & “Lift the
Dot” Kits
CANOPY FASTENERS
FASTENERS
A range of fastener kits all blister packed, full assembly instructions are given on the rear of the pack.
Turnbutton Fastener Kit with two hole bases, 6mm
TURNBUTTON KITS
With a simple "twist to lock" action, the turnbutton
fastener is positively engaged by twisting the knob.
Commonly found on boat covers (especially
narrowboat cratch covers), they are an essential for
any marine repair kit.
(Stainless Steel or Brass Nickel Plated )
• 5 x 6mm Turnbuttons with two
hole bases
• 5 x Eyelets
• 5 x Washers
• 10 x S/S Screws
Available in stainless steel with polished / self
coloured finish, or heavy gauge brass with
heavy duty nickel plate finish.
Part No. 6-68400 Stainless Steel
Part No. 6-68401 Brass Nickel Plated
Turnbutton Fastener Kit for fabric to
fabric application, 7mm
Turnbutton Fastener Kit with two hole
bases, 8mm
Turnbutton Fastener Kit with two hole
bases, 10mm
(Brass Nickel Plated )
• 5 x 7mm Pronged Turnbuttons
• 5 x Clinch Plates
• 5 x Eyelets
• 5 x Washers
Part No. 6-68402
• 5 x 8mm Turnbuttons with two hole bases
• 5 x Eyelets
• 5 x Washers
• 10 x Stainless Steel Screws
Part No. 6-68403
• 4 x 10mm Turnbuttons with two hole bases
• 4 x Eyelets
• 4 x Washers
Part No. 6-68404
“Lift the Dot” Fastener Kit for Fabric
to Fabric Application
“LIFT THE DOT” KITS
With a simple "snap on, pull off" action, the
fastener locks on three sides of the stud and will
only detach from the fourth trademarked side by
lifting the dot / spot.
• 5 x “Lift the Dot” Fasteners
• 5 x Pronged Studs
• 5 x Clinch Plates for Pronged Studs
Made in heavy gauge brass with phosphor
bronze spring, finished in heavy duty nickel plate.
72
Part No. 6-68410
“Lift the Dot” Fastener Kit with Two
Hole Base Studs* (Brass Nickel Plated )
“Lift the Dot” Fastener Kit with M5
Studs* (Brass Nickel Plated )
“Lift the Dot” Fastener Kit with
Woodscrew Studs* (Brass Nickel Plated )
• 5 x Two Hole Base Studs*
• 5 x M5 x 10mm Studs*
• 5 x M5 Nuts
• 5 x Woodscrew Studs*
* Kit with double height two hole base studs available
* Kit with double height M5 studs available
Part No. 6-68411 with regular base studs
Part No. 6-68412 with double height base studs
Part No. 6-68413 with regular M5 studs
Part No. 6-68414 with double height M5 studs
* Kit with double height woodscrew studs available
Part No. 6-68415 with regular woodscrew studs
Part No. 6-68416 with double height woodscrew
studs
Press Stud & Eyelet Kits,
Tonneau Buttons & more
CANOPY FASTENERS
FASTENERS
A range of fastener kits all blister packed, full assembly instructions are given on the rear of the pack.
PRESS STUD KITS
With easy "snap on, pull off" action, and a heavy duty spring to limit the risk of unwanted detachment.
Available in stainless steel with polished / self coloured finish, or heavy gauge brass with heavy duty nickel plate finish.
Press Stud Fastener Kit for fabric to wood application
Press Stud Fastener Kit for fabric to fabric application
• 10 x 15.2mm Ø buttons
(Ligne 24)
• 10 x Sockets
• 10 x Studs with
10mm Screw
• 1 x set of closing tools
• 10 x 15.2mm Ø buttons
(Ligne 24)
• 10 x Sockets
• 10 x Studs
• 10 x Eyelets
• 1 x set of closing tools
BRASS EYELET & WASHER REPAIR KITS
Brass sail eyelets and washers reinforce and
strengthen perforations in fabrics. These kits
are ideal for maintaining and repairing boat
covers, canopies, sails, tarpaulins etc.
Made in Brass with polished / self
6-68430
coloured finish.
6-68432
6-68431
6-68433
6-68434
6.7mm (1/4'') ID Kit
8mm (5/16'') ID Kit
9.5mm (3/8'') ID Kit
11.1mm (7/16'') ID Kit 12.7mm (1/2'') ID Kit
11mm Closed Eyelet OD
• 50 x 6.7mm ID Eyelets
• 50 x Washers
• 1 x Set of Closing Tools
Part No. 6-68430
14.3mm Closed Eyelet OD
• 25 x 8mm ID Eyelets
• 25 x Washers
Part No. 6-68431
• 25 x Washers
Part No. 6-68432
• 25 x Washers
Part No. 6-68433
• 15 x Washers
Part No. 6-68434
RUBBER GUYS
Overall length: 76mm (3'')
Pack of 6 Part No. 6-68440
TONNEAU BUTTON KIT
S/S LACING HOOKS
• 4 x Stainless Steel Lacing Hooks
Polished / Self colour finish
Part No. 6-68441
• 10 x Norwegian Buttons
Made in heavy gauge brass with heavy duty
nickel plate finish
Part No. 6-68442
TONNEAU BUTTON KITS
• 4 x Plastic Buttons
Part No. 6-68443 Black Buttons
Part No. 6-68444 White Buttons
73
Marinco Nicro Vents
XXX
VENTILATION
SOLAR MINI VENT 1000
The Solar Mini Vent 1000 offers a solar powered exhaust
only ventilation in daylight hours to keep a cabin cool,
and passive ventilation during nightime hours
Part No. 6-11600 White
Part No. 6-11601 S/Steel
Specifications:
Overall Dimensions:
Fan Vent Size:
Cut Out Hole Size:
Interior Trim size:
• Solar powered exhaust fan operated ventilation during
daylight hours
• Passive ventilation during nightime hours
• Whisper quiet fan operation and no wiring needed
• Includes shut off damper for rough seas and white plastic
interior trim
• Available in white plastic ABS or with stainless steel cover
• Capacity: 700cu.ft per hour under solar power ventilation
7'' (178mm) Dia. x 13⁄4 '' (45mm) high
3'' (76mm) Dia.
33⁄4 '' (96mm) Dia. to 6'' (152mm) Dia.
Cut out 33⁄4 '' (96mm) Dia. x 5'' (127mm) OD
DAY / NIGHT PLUS SOLAR VENT
Circulates fresh air in or out of the boat cabin eliminating mould, mildew and musty air. Solar power
operates fan during daylight hours and a built in battery allows the fan to run during nightime hours.
• Solar powered fan operation and built in battery charge during daylight hours
• Built in battery fan operation during nightime hours
• Whisper quiet fan operation and no wiring needed
• Includes intake and exhaust fans, insect screen and white plastic interior trim
• Complete shut off damper to close off air and protect against rough seas.
• Built in on/off fan switch
• Available in white plastic ABS or with stainless steel cover
• Can be used in place of snap in deck plates 6-11628 3" and 6-11629 4"
• Capacity: 1000cu.ft per hour (4" version)
Part No.
6-11605
6-11606
6-11607
6-11608
Finish:
S/Steel
White
S/Steel
White
Overall Dimension:
9'' (229mm) Dia. x 21⁄4 '' (57mm) high
Fan Vent Size:
3'' (76mm) Dia.
4'' (101mm) Dia.
Cut Out Hole Size:
33⁄4 '' (96mm) Dia.
43⁄4 ''' (121mm) Dia.
Interior Trim Size: Cut out 33⁄4 '' (121mm) Dia Cut out 43⁄4 '' (121mm) Dia
x 5'' (127mm) OD
x 6'' (152mm) OD
AIR VENT 500 PASSIVE EXHAUST
VENTILATION
The Air Vent 500 is a
non-solar ventilator that
can passively move 600 to
1000 cubic feet of air per
hour in a 15 knot breeze.
An economical solution to use
with solar powered or other DC
powered fan ventilation to create cross flow air circulation
• High volume passive ventilation with up to 1000cu.ft per
hour air flow in a 15 knot breeze
• Strong U.V stabilised white ABS construction with
translucent centre allowing light through
• Complete shut off damper to close off air ventilation
from below
• Fits using a 33⁄4 " diameter hole or can be retrofitted to an
existing hole up to 6" diameter
Part No. 6-11611
Specifications:
Vent Size:
3'' (76mm) Dia.
Overall Dimensions: 7'' (178mm) Dia. x 13⁄4 '' (45mm) high
Cut Out Hole Size:
33⁄4 '' (96mm) Dia. to 6'' (152mm) Dia.
74
NiMh Nickel Metal Hybrid Battery for Day/Night Plus Vents
Replacement battery for current Day/Night Plus vents, as well
as, older model PowerVent 3000 and Day / Night 2000 Vents.
Part No. 6-11610
• High capacity C-cell battery
• 1.2 volts, 2.0 amp-hours
• Average life: 3 - 5 years
• Environmentally friendly
SNAP-IN DELUXE LOW PROFILE PVC COWL VENT
Made from soft, durable PVC, these vents are perfect for an air intake to
supplement solar or DC powered ventilation and are also commonly used as
bilge ventilation with or without a mechanical blower.
• Soft and durable PVC construction, returns to
original shape if stepped on
• Safer than metal cowl vents preventing injury
and snagging lines
• Supplied with snap-in deck plate and
watertight flush fitting cover
Part No:
Vent Size:
Overall Dimensions:
Cut Out Hole Size:
6-11620
3'' (76mm) Dia.
H: 41⁄2 '' (114mm)
W: 6'' (152mm)
D: 4'' (101mm)
33⁄4 '' (96mm) Dia
WHITE SNAP-IN DECK PLATES
• Includes flush fit snap-in watertight cover
• Use with any Marinco snap-in vent system
Vent Size
3" (76mm)
4" (101mm)
Cut-Out Hole Size
33⁄4 " (96mm) Dia.
43⁄4 " (121mm) Dia.
Part No.
6-11628
6-11629
6-11621
1'' (101mm) Dia.
H: 51⁄2 '' (140mm)
W: 73⁄4 '' (197mm)
D: 5'' (127mm)
43⁄4 '' (121mm) Dia
Marinco Spot Lights
SPOT LIGHTS
WIRELESS REMOTE SPOT LIGHT
• Universal 12/24 volt circuit with bright 100W, H3 halogen bulb
• UV resistant, IP56 Weatherproof ABS housing and Lexan® lens
• O-ring sealed housing, designed for the harsh marine environment - moisture, salt,
shock and vibration tested
• Universal snap-in mounting system (can be mounted upside down)
• Super-quiet, all-weather motor with limit stops provides a full range of coverage
• 370° sweep and 120° Tilt (75° up and 45° down)
• One touch auto sweep and S.O.S. function
• Wireless dash mount remote standard; (hard wired & handheld remotes are optional)
• Available in white, black and chrome
Specifications:
Bulb:
Power (Input voltage):
Current draw (idle/in use):
Peak Beam Intensity:
Peak Beam Distance:
Lux @ 66' (20 m):
Coverage at 66' (20 m):
Rotation:
Tilt:
Wireless range:
Weight:
Housing material:
Lens material:
Operating temp range:
IP Rating:
100 watt, H3 halogen
12V or 24V
0.03 amps / 7.0 amps
210,000 Cp
917 ft (280m)
525 Lux
132 sq ft (12 sq m)
370° (built in limit stops)
120° Tilt (75° up & 45° down)
200 ft (65 m)
7.5" x 7.5" x 9.25"
(19cm x 19cm x 23.5cm)
3.30lbs (1.5kg)
UV resistant PC/ASA
UV resistant Lexan®
5°F – 113°F (-15°C – 45°C)
IP56
Description
Wireless Remote Spot Light
Colour
Black
White
Chrome
Part No.
6-11500
6-11501
6-11502
For spare bulbs see Section 8
REMOTE OPTIONS
Part No.
Remote Specifications:
Power
Current Draw (idle/in use):
Wireless Range:
Estimated Battery Life:
Weight:
Housing Material:
Button Material:
Operating Temp Range:
IP Rating:
6-11512
Included
Wireless Bridge Remote
12 or 24 volt (hard wired)
negligible
200ft (65m)
—
3.5" x 2.25" x 0.75"
88 x 57 x 19mm
2.12 oz (60 g)
UV resistant PC/ASA
Silicone (glow in the dark)
5°F – 113°F (-15°C – 45°C)
IP54
6-11511
(Optional)
Hand Held Bridge Remote
CR2540 button cell battery
negligible
200 ft (65 m)
> 40 hours (continuous use)
2.0" x 3.78" x 1"
51 x 96 x 25mm
2.82 oz (80 g)
UV resistant PC/ASA
5°F – 113°F (-15°C – 45°C)
IP56
6-11513
(Optional)
Wired Bridge Remote
12 or 24 volt (hard wired)
negligible
—
—
3.5" x 2.25" x 0.75"
88 x 57 x 19mm
2.12 oz (60 g)
UV resistant PC/ASA
5°F – 113°F (-15°C – 45°C)
IP54
75
Marinco AFI Horns
HORNS
ELECTRONIC HORN (White Grill)
DROP-IN “H” HORN with Grills
• Electronic Piezo horn sound
• One piece water resistant housing, grill is
molded to horn
• 107 dB(A) at one meter
• Fundamental frequency: 550±100Hz
• Mounts in a standard 57mm dia. (2.25") opening
• Draws less than 1A, maximum draw: 0.8A
• Internal space requirements (W x H x D):
57mm (2.25") x 57mm (2.25") x 50mm (2")
• Grill dimensions (W x H x D): 124mm (4.875")
x 70mm (2.75") x 127mm (5")
Part No. 6-11002
• Comes with both black ABS and white ASA
snap-in grills
• dB(A) rating: 107 at one meter
• Internal space requirements (H x W x D):
50mm (2") x 86mm (3.375") x 82mm (3.25")
• Distinctive marine horn sound
• Enclosed sound unit
• Easy installation or retrofit, mounts from
the outside
• 12 volt, maximum amp draw: 4 amps
Part No. 6-11004
SINGLE TRUMPET MINI AIR HORN
DUAL TRUMPET MINI AIR HORN
DUAL TRUMPET AIR HORNS (24V)
• Solid brass construction, chrome plated
• Non-corrosive Lexan® polycarbonate diaphragm
• Includes compressor, air tubing, fittings, and
hardware (12V compressor produces 9-11 PSI)
• Dimensions (L x W x H): 241mm (9.5") x 89mm
(3.5") x 89mm (3.5")
• Maximum amp draw: 12V: 20A
• dB rating: 126 at one meter, 1/3 octave band
Part No. 6-11020
• Solid brass construction, chrome plated
• Includes compressor, air tubing, fittings, and
hardware (12V compressor produces 9-11 PSI)
• Dimensions (L x W x H): 241mm (9.5") x
127mm (5") x 95mm (3.75")
• dB(A) rating: 127 at one meter, 1/3 octave band
• Fundamental frequency: 630±15/525±15Hz
Part No. 6-11022
• Chrome plated
• Includes compressor, air tubing, fittings,
and hardware
• Dimensions (L x W x H): 431mm (17") x 178mm
(7") x 95mm (3.75")
• dB rating: 121 at one meter, 1/3 octave band
Part No. 6-11027
AIR HORN COMPRESSOR
• Replacement compressor fits all Marinco
AFI™ Air Horns
• Dimensions (D x L): 66mm (2.625") x
127mm (5")
• Includes mounting bracket
• Maximum amp draw: 20 amps, produces
9 - 11 PSI
Part No. 6-11030 (12V) Part No. 6-11031 (24V)
76
MINI HIDDEN HORN
• Type 304 stainless steel diaphragm
• Dimensions (W x H x L): 82mm (3.25") x
44mm (1.75") x 76mm (3")
• Maximum amp draw: 3 amps
• This horn is not designed for installation in
exposed areas.
Part No. 6-11010
SINGLE TRUMPET ELECTRIC HORN (24V)
• 100% stainless steel exterior
• Includes laminated horn signal card and stainless steel mounting screws
• Dimensions (L x W x H): 419mm (16.5") x 101mm (4") x 120mm (4.75")
• Maximum amp draw: 2.5 amps
Part No. 6-11041
Marinco AFI Horns
HORNS
COMPACT SINGLE TRUMPET
ELECTRIC HORN (12V)
COMPACT DUAL TRUMPET
ELECTRIC HORN (12V)
(3.5") x 101mm (4")
• Maximum amp draw: 3.5 amps
Part No. 6-11044
(7.5") x 101mm (4")
• Maximum amp draw: 7 amps
Part No. 6-11046
MINIBLAST™ COMPACT
ELECTRIC HORNS (12V)
• Long lasting, non-corrosive ASA plastic cover
• Sealed sound unit with stainless steel diaphragm
• Mounts in same hole pattern as the 6-11054 horn
• Dimensions (L x W x H): 111mm (4.375") x
86mm (3.375") x 50mm (2")
• Maximum amp draw: 3A, 12V
• dB(A) rating: 106 at 1m (3')
Part No. 6-11050 (White)
Part No. 6-11052 (Black)
MINI COMPACT
ELECTRIC HORN (12V)
MINI TWIN ELECTRIC
HORN (12V)
COMPACT SINGLE HORN INTERNATIONAL
WITH BLACK COVER (12V) SHORTY HORN (12V)
• Totally sealed sound unit
• Type 304 stainless steel cover,
diaphragm, mounting bracket
• Dimensions (L x W x H): 76mm
(3") x 82mm (3.25") x 44mm
(1.75")
• Fundamental frequency:
440±20Hz
Part No. 6-11054
• Type 304 stainless steel covers,
diaphragms, and mounting bracket
• Dimensions (L x W x H): 76mm (3")
x 203mm (8") x 44mm (1.75")
490±20/440±20Hz
Part No. 6-11056
• Stainless steel diaphragm and
mounting bracket
• Black polypropylene cover
(4.5") x 101mm (4") x 76mm (3")
350±15Hz
Part No. 6-11058
• Stainless steel diaphragm and
mounting bracket
• ABS, triple chrome-plated housing
(4.25") x 127mm (5") x 165mm (6.5")
290±15 Hz
• Loudest Marinco® compact
electric horn
Part No. 6-11060
For Marinco BEP Pro Installer Series, see pages 95 -99
77
Marinco AFI Wiper Kits
& Motors
WIPERS
WMW WIPER KIT (12V) Windshield Mount: 3/8" (9mm) shaft diameter
KIT CONTENTS:
• WMW Wiper Motor
• 11.5" (292mm) Deluxe stainless steel
curved blade (6-11311)
• Deluxe adjustable 6.75" to 10.5" (171 266mm) stainless steel arm (6-11340)
• Sweep: 80º
• Shaft length: 2.5'' (63mm)
Part No. 6-11200
WMW Wiper Motor Features:
• Water-resistant sealed motor
• Chrome-plated brass case and shaft housing
• Stainless steel front plate and wiper shaft
• Maximum current draw: 2 amps
• Shaft diameter: 3/8" (9mm)
• For external use in open cabin boats
• Dimensions (L x W x D): 4.25" (108mm)
x 2.75" (70mm) x 3.5" (89mm)
STANDARD WIPER KIT (12V) Windshield Mount: 3/8" (9mm) shaft diameter
KIT CONTENTS:
• STD Wiper Motor
• 11.5" (292mm) Deluxe stainless steel
curved blade (6-11311)
• Deluxe adjustable 6.75" to 10.5" (171 266mm) stainless steel arm (6-11340)
• Sweep: 80º
• Shaft Length: 2.5'' (63mm)
Part No. 6-11204
STD Wiper Motor Features:
• Corrosion-proof aluminium alloy case with black
crackle finish
• Base & mounting plates are chrome plated
naval brass
• Maximum current draw: 2 amps
• 80° sweep, adjustable right or left self-parking
• Shaft diameter: 3/8" (9mm)
• Dimensions (L x W x D): 3.875" (98mm) x
2.25" (57mm) x 3.5" (89mm)
500 WIPER KIT (12V) Windshield Mount: 1/2" (13mm) shaft diameter
• 500 Waterproof Wiper Motor (is totally sealed and 100% waterproof)
• 11.5" (292mm) Deluxe stainless steel curved blade (6-11311)
• Deluxe adjustable 6.75" to 10.5" (171 - 266mm) stainless steel arm (6-11340)
• Sweep: 80º
• Shaft Length: 2.5'' (63mm)
Part No. 6-11210
MRV WIPER MOTOR
• Easily powers 22" (559mm) x 22" (559mm) deluxe arm/blade combinations, or a 20"
(508mm) x 20" (508mm) premier arm/blade combination at sweep sets of 80° or less
• Factory pre-set sweep of 80º or 110º adjustable to 45º, 60º, 80º or 110º
• 0.625" (16mm) diameter shaft
• Available in 2 shaft lengths: 1.5" (38mm), 2.5" (63mm), *includes 0.5" (13mm) length of
knurled arm fitting
• Corrosion-resistant casing
• Heavy-duty motor with right angle drive
• Two-speed motor, can be operated as one speed
• Solid brass knurled drive nut with brass and stainless
steel drive shaft
• Adjustable right or left self parking, coast to park
• Includes 5 amp fuse and holder
• Stainless steel fasteners and mounting bracket
• Use with three-position switch (not included)
• Compact size (L x W x D): 7.625" (193mm) x 4"
Shaft*
Voltage Sweep
(101mm) x 2" (51mm)
1.5"
(38mm)
12V
80°
• Stall torque: 109 in-lbs (125 kgf/cm: 12.3 Nm)
2.5"
(63mm)
12V
80°
• Stall current: 11.5–13.0 amps
2.5" (63mm)
12V
110°
• No load current: 0.5–1.2 amps
2.5" (63mm)
24V
110°
78
Part No.
6-11220
6-11224
6-11226
6-11227
Marinco AFI Wiper Kits
& Motors
WIPERS
1000 WATERPROOF WIPER MOTOR
• Powers 16" (406mm) Deluxe arm and 16" (406mm) Deluxe blade
combinations at a sweep set of 110°
• Factory pre-set sweep of 80°, adjustable to 50°, 65°, 80°, or 110°
• Fully sealed waterproof housing made of UV stabilized, hightemperature, high-impact thermoplastic
• 12 volt heavy-duty motor with anti-rotation drive shaft
• Knurled drive shaft and solid brass arm drive nut
• Coast to park with adjustable right or left self parking
• Includes 5 amp fuse and holder (on/off switch not included)
• RF shielded circuitry
• Weight: 1.75 lbs (0.79kg)
• Shaft length: 2.5" (68mm), *includes 0.5" (13mm) length of
knurled arm fitting
• Measures approximately (L x W x D): 6.625" (168mm) x 3.375"
(86mm) x 2" (51mm)
• Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm)
• Stall current: 9.8 - 10.0 amps
1000 WATERPROOF
• No load current: 0.8 - 1.2 amps
Kit Contents:
Shaft*
Voltage Sweep
Part No.
• 6-11244 motor
2.5" (63mm)
12V
80°
6-11244
• 6-11341 10'' - 14'' arm
• 14'' polymer wiper blade
WIPER KIT
Part No. 6-11248
2.5 WATERPROOF WIPER MOTOR
• Fully sealed powder coated aluminium waterproof base and housing
• Powers a 26" (660mm) Deluxe arm and Deluxe blade combination or a
24" (609mm) Premier arm and Premier blade combination
• Shaft lengths: 1.5'' (38mm) or 2.5" (68mm), *includes 0.5" (13mm) length of
knurled arm fitting
• Factory pre-set sweep angles of 80°, with easy adjustment to 45° or 60°
• Chrome plated solid brass knurled drive nut with brass and
stainless steel drive shaft
• Two speed motor
• Sealed 6" wire leads, 16 AWG
• Adjustable right or left self parking
• Coast to park
• Includes 6 amp fuse and holder (operating switch not included)
• Measures approximately (L x W x D): 7.875" (200mm) x 4.25" (108mm) x
3" (76mm) - see drawing
• No load current: 1.0 -1.6 amps
Shaft*
1.5" (38mm)
2.5" (63mm)
Voltage
12V
12V
Sweep
80°
80°
Part No.
6-11261
6-11264
79
Marinco AFI Wiper Motor,
Switch & Washer Kit
WIPERS
1.5 WATERPROOF WIPER MOTOR
• Fully sealed powder coated aluminium waterproof base and housing
• Powers a 22" (559mm) Deluxe arm and 22" (559mm) Deluxe blade combination or
a 20" (508mm) Premier arm and 20" (508mm) Premier blade combination
• Shaft length: 1.5'' (38mm) or 2.5" (68mm) (includes 0.5" (13mm) length of knurled arm fitting)
• Factory pre-set sweep angles of 80°, with easy adjustment to 45° or 60°
• Chrome plated solid brass knurled drive nut with brass and stainless steel drive shaft
• Two speed motor
• Sealed 6" wire leads, 16 AWG
• Adjustable right or left self parking
• Coast to park
• Includes 5 amp fuse and holder (operating switch not included)
• Measures approximately (L x W x D): 7.75" (197mm)
x 4" (101mm) x 2.75" (70mm) - see drawing
• No load current: 0.5 - 1.2 amps
• Replaces AFI 2000 motor
Shaft
1.5" (38mm)
2.5" (63mm)
Voltage Sweep
12V
80°
12V
80°
Part No.
6-11273
6-11274
INTELLIGENT WIPER SWITCH - SINGLE MOTOR
AFI’s new microcontroller based “intelligent” switch provides all necessary
wiper motor functions in one small component.
• Settings for two continuous speed functions and three intermittent speed
functions (2 second delay, 4 second delay, 8 second delay)
• Washer system operation function
• Blinking LED lights in switch indicate operating function
• Dual motor switch synchronizes both motors in each mode and deactivates
each motor individually
• Works with 12V or 24V DC motors
• Fits standard switch size openings, requires 2.65" (67.5mm) depth
• Includes one ten pole connector with female pins and two female quick-connects
ADD-ON WINDSHIELD WASHER KIT
• Can be used on new or existing AFI™
Deluxe wiper arm and blade sets
• Kit includes parts to outfit two wiper arms
• Sprayer fittings (kit includes two) each
have four adjustable brass nozzles to
provide maximum spray coverage for
most any windshield
• Plastic parts are numbered to make
installation easy
Part No. 6-11292
80
KIT INCLUDES:
• Water tank with mounting bracket
• 12 Volt pump motor
• Under deck tee fitting
• Thru deck fitting and hardware
• Below deck clear tubing (16 ft.)
• Above deck black tubing (6 ft.)
• Large and small rivet clips
• Wiper arm clips
• Sprayer fittings with clamps
Part No. 6-11290
Marinco AFI Wiper
Blades & Arms
WIPERS
DELUXE ADJUSTABLE WIPER ARM
• All arms are stainless steel
• Arm has “articulating/bend-back” feature
• Motor shaft mounting has additional set screw clamping
Wet / Dry
Dry
Dry
Dry
Dry
Length
(adjustable)
6.75'' - 10.5'' (171 - 267mm)
10'' - 14'' (254 - 355mm)
14'' - 20'' (355 - 508mm)
18'' - 24' (457 - 609mm)
Stainless
Part No.
6-11340
6-11341
6-11342
–
Black
Part No.
–
6-11345
6-11346
6-11347
DELUXE STAINLESS
STEEL CURVED
WIPER BLADES
• Works well on curved or
flat windshields
POLYMER WIPER
BLADES
DELUXE ADJUSTABLE PANTOGRAPHIC ARM
• For Use with AFI™ 2.5, 1.5 and MRV Motors
• Stainless steel
• Arm has “articulating/bend-back” feature
• Motor shaft mounting has additional set screw clamping
Wet / Dry
Dry
Dry
Length
(adjustable)
12'' - 17'' (305 - 432mm)
17'' - 22' (432 - 559mm)
Stainless
Part No.
6-11350
6-11351
PREMIER PANTOGRAPHIC S/S WIPER ARM
• Combines the heavy-duty construction and materials of the Premier
wiper arm line with a built-in wet arm system that allows for a clean
and easy installation of a washer system
• A simple and easy way to keep your windshield clean, the Premier
wet arms feature a black PVC hose that runs up the center of the arm
and ends in a four-nozzle fixture that is an integral part of the wiper
arm itself
• Each solid brass nozzle is adjustable to provide a maximum coverage
spray pattern for most any windshield
• Black glass polyimpregnated
construction
• Marine-grade rubber squeegee
Length
11.5" (292mm)
14" (355mm)
16" (406mm)
18" (457mm)
20" (508mm)
Part No.
6-11311
6-11312
6-11313
6-11314
6-11315
Length
12" (305mm)
14" (355mm)
16" (406mm)
18" (457mm)
20" (508mm)
22" (559mm)
24" (609mm)
Part No.
6-11301
6-11302
6-11303
6-11304
6-11305
6-11306
6-11307
PREMIER S/S WIPER BLADE
• All stainless steel construction
Length
Part No.
• Marine grade silicone squeegee
20" (508mm)
6-11321
• Extra squeegee “claws” spread
pressure evenly over the length of the blade, allowing the blade to
conform to a curved windshield
For more Marinco products see
Section 8 of our catalogue.
Pantographic wiper arms will only function properly with wiper
motor sweep angles 80º or less.
Wet / Dry
Wet
Length
(adjustable)
17'' - 22'' (432 - 559mm)
Stainless
Part No.
6-11370
81
Shakespeare VHF
Antennas
ANTENNAS
SHAKESPEARE HELICAL VHF ANTENNAS
HA156C HELIFLEX
5912 RUBBER DUCK
Part No. 6-09000
Part No. 6-09002
• Lightweight, low windage, compact
helical VHF antenna for short range
communications
• A favourite for racing yachts and
sports boats
• Integral aluminium masthead
mounting bracket
• 20m of RG-58 cable and PL-259
connector
• Antenna length: 0.15m (0.5ft)
• Gain: 1dB
MD 23N
• Lightweight, low windage, compact
helical VHF antenna for short range
communications
• Ideal for emergency or temporary
installations and particularly suitable
for cabin or console tops
• Attached and detaches with ease
using supplied flush mounting kit
• Gold plated connectors supplied
• Gain: 1dB
• Heavy-duty helical VHF antenna
for short range communications
• Ideal for sail and power boats to
withstand the most rugged
conditions
• Watertight, strong, lightweight
(0.3kg) construction
• Electronics are sealed in epoxy for
additional protection
• Fitted with ‘N’ Jack to allow
detachable cable (no bracket)
• Compatible with RG-58 cable
• Antenna length: 0.3m (1ft)
• Gain: 1dB
Part No. 6-09005
SHAKESPEARE STAINLESS STEEL VHF ANTENNAS
5215 SQUATTY BODY®
YWX WHIPFLEX™
• Stainless steel whip VHF antenna for sail boats
• Unique solderless watertight masthead
connector system for easy installation and
dismounting
• Lightweight - 0.15 kilo with bracket
• Includes 180mm cranked masthead nylon
mounting bracket
• 20m of RG-58 cable and PL-259 connector
• Gain: 3dBi
Part No. 6-09010
• Stainless steel whip VHF antenna for
sail boats
• Lightweight and low profile
• Removeable whip
• SO-239 (UHF) connector in base
• Sealed, tin-plated copper wire coil
• Stainless steel “L” bracket supplied for
mast mounting or use optional 4716 or
4717 mast head mounts (p.92)
• Gain: 3dBi
Part No. 6-09013
YHK HAWK™
6-09020
Detail
6-09011
6-09010
82
• Heavy-duty stainless steel whip ‘lift
and lay’ VHF antenna
• Ideal for sports fishing boats and
smaller power boats
• Simple to set up and lay down,
ensuring the antenna does not
obstruct when fishing or storing
the boat
• Whip is user replaceable
• Stainless steel “L” bracket supplied
• Gain: 3dBi
Part No. 6-09020
• Stainless steel whip VHF antenna
with ‘Hawk’ windex for
sail boats
• Unique solderless watertight
masthead connector system for
easy installation and dismounting
• Lightweight - 0.15 kilo with bracket
• Includes 180mm flat masthead
nylon mounting bracket
• 20m of RG-58 cable and PL-259
connector
• Gain: 3dBi
Part No. 6-09011
5247-A LIFT ‘N’ LAY
6-09013
6-09020
Shakespeare VHF
Antennas
ANTENNAS
SHAKESPEARE STAINLESS STEEL VHF ANTENNAS
5216
5250 SKINNY MINI™
• Lightweight, black
stainless steel VHF
antenna for short range
communications
• Ideal for sports sailing
boats
• Gold plated connector
• ‘L’ bracket for mast top
mounting
• Antenna length:
0.3m (1ft)
• Gain: 1dB
• Compact, lightweight, stainless
steel whip VHF antenna
• Ideal for small power boats
• 4.5m of RG-58 cable plus PL-259
plug included. Requires a mount
with centre hole for cable
• Suggested mounts: 4187, 5187,
4188-S or 4190 (p.91)
• Chromed brass ferrule
• Gain: 3dBi
Part No. 6-09019
Part No. 6-09021
YRR RIB RAIDER™
• Black (YRR) or White
(YRR-W), stainless steel
VHF antenna for short
range communications
• Designed to avoid snagging
and excessive whip action,
ideal for RIBs and high
speed craft
• Solderless connector
system for ease of installation
and removal
• Integral bracket with
mounting holes
• 8m of RG-58 cable with
PL-259 connector
• Gain: 1dB
5241-R
• Heavy duty stainless steel
whip VHF antenna
• Ideal for fast sports boats,
RIBs and small fishing boats
• Whip is user replaceable
• 4.5m of RG-58 cable plus
PL-259 plug included.
Requires a mount with
centre hole for cable
• Suggested mounts: 4187,
5187, 4188-S or 4190 (p.91)
• Gain: 3dBi
Part No. 6-09025
Part No. 6-09022
(YRR - Black)
Part No. 6-09023
(YRR-W - White)
6-09023
6-09025
6-09021
6-09022
5911 THE STOWAWAY™
MD 20N
• Heavy duty stainless steel whip
VHF antenna
withstand the most rugged
conditions
• Watertight, strong, lightweight
(0.2kg) construction
• Fitted with ‘N’ Jack to allow
detachable cable (no bracket)
• Gain: 3dBi
Part No. 6-09026
• Short VHF whip antenna with flexible outer covering
• Ideal as a temporary, spare or emergency antenna
• Supplied with 3.6m of cable and PL-259 connector
• Rubber suction cup for easy mounting
• Velcro storage strips included
• Packed in a 50cm, weather resistant, retail plastic tube
• Gain: 1dB
Part No. 6-09030
6-09030
SL 156 SHORELINK™
• Emergency VHF antenna for instant set up if your main
antenna becomes broken or disabled
• Sealed in a waterproof 24cm weather resistant plastic tube
• Stored easily on bulkhead or in flare pack
• 6m of miniature coaxial cable (RG-174) with PL-259
connector fitted
• Compulsory for R.O.R.C. racing
• Gain: 1dB
6-09032
Part No. 6-09032
83
Shakespeare VHF
Antennas
ANTENNAS
SHAKESPEARE FIBREGLASS VHF ANTENNAS
426-N
• White fibreglass VHF antenna
• Designed for high speed sports
boats and RIBs working in
rough conditions
• Quality copper cable elements for
good range and efficiency
• Includes 4.5m RG-58 cable and
PL-259 connector (not attached)
• Suggested mounts: 4186, 4721
or 4722 (p.91)
• Nylon ferrule
• Gain: 3dBi
Part No. 6-09040
5104 CENTENNIAL™
5400-XT / 5401-XT LITTLE GIANT™
• Durable, smooth, white fibreglass
VHF antenna with polyurethane
finish that will not yellow in the sun.
• A good looking and superb value
antenna, ideal for power and
work boats
• Brass and copper elements for
extra performance
• Suggested mounts: 4187 or 5187
(p.91)
• Gain: 3dBi
• Heavy-duty, high gloss, smooth Galaxy white
(5400-XT) or black (5401-XT) fibreglass VHF
antenna with polyurethane finish that will not
yellow in the sun.
• Centre-fed 1⁄2 wave coaxial sleeve
• An outstanding, heavy-duty antenna, ideal for
power boats, work and fishing boats operating
in all types of conditions
• Brass and copper elements to maximise range
and performance
• 6m RG-8X ultra low loss cable and PL-259
connector (not attached)
• Matches 5420-XT / 5421-XT AM/FM
antennas (p.88)
• Suggested mounts: 4187 or 5187 (p.91)
• Stainless steel ferrule
• Gain: 3dBi
Part No. 6-09041
6-09040
6-09041
5400-XP
• Heavy-duty, high gloss, smooth
Galaxy white fibreglass VHF antenna
with polyurethane finish that will not
yellow in the sun
• “Silver Series” (extends
transmit/receive performance)
• Centre-fed 1⁄2 wave coaxial sleeve
• Exceptionally efficient performing,
heavy-duty antenna, ideal for serious
power boat, work and fishing boat
operators in all types of conditions
• Stranded high quality tinned copper
inner conductor maximises signal
strength, combined with the
copper and silver plated brass
elements will extend
performance and life
• 6m RG-8X ultra low loss cable
and PL-259 connector (not
attached)
• Suggested mounts: 4187 or
5187 (p.91)
• Gain: 3dBi
427-N & 427-N KIT
• Durable smooth gloss finished
white fibreglass VHF antenna
• Very good value, this antenna is
ideal for power and work boats
extra performance
• Includes 6m RG-58 cable and
• Matches 5350-N AM/FM antenna
(p.88)
or 495-B (p.91-92)
• Nylon ferrule
• Gain: 3dBi
Part No. 6-09050
• Durable smooth gloss finished
white fibreglass VHF antenna
• A very good looking antenna,
extra performance
• Matches 5350-S AM/FM antenna,
(p.88)
(p.91)
• Gain: 3dBi
Part No. 6-09051
427-N Kit as above but with 4186
nylon rachet mount supplied and
packaged in a box
Part No. 6-09052 (Kit)
6-09052
6-09051
Part No. 6-09045
6-09045
84
427-S
6-09050
6-09043
6-09042
Part No. 6-09042 (5400-XT - White)
Part No. 6-09043 (5401-XT - Black)
Shakespeare VHF
Antennas
ANTENNAS
5206-N / 5206-C
• Economical, lightweight, white
fibreglass VHF antenna
• Attractive antenna for good
communications where range is
not a predominant factor, ideal for
power boat applications
• 5206-N: Nylon ferrule. Suggested
mount 4186 (p.91)
• 5206-C: Chromed brass ferrule.
Suggested mount 4187 or 5187
(p.91)
• Gain: 6dBi
5206-BL-C
5101-S
• Economical, lightweight, black
• With an attractive black finish this
antenna is ideal for power boats
and for good communications
where range is not a predominant
factor
• Suggested mounts 4187 or 5187
(p.91)
• Gain: 6dBi
• Durable, smooth, white gloss
• Good looking and excellent
value, ideal for power and work
boats
extra performance
• Twin to 5120-S AM/FM antennas
(p.89)
(p.91)
• Gain: 6dBi
Part No. 6-09062
Part No. 6-09063
Part No. 6-09060 (5206-N)
Part No. 6-09061 (5206-C)
6-09062
Detail
6-09061
Detail
6-09060
5225-XT
Galaxy white fibreglass VHF
antenna with polyurethane finish
that will not yellow in the sun
• Collinear-phased 5/8 wave
elements
• An outstanding performing,
heavy-duty antenna, ideal for
power boats, work and fishing
boats operating in all types
of conditions
• Brass and copper elements to
maximise range and performance
• Includes 6m RG-8X ultra low
loss cable and PL-259 connector
(not attached)
• Matches 5235-XT AM/FM
antenna (p.89)
(p.91)
• Gain: 6dBi
Part No. 6-09065
6-09063
Detail
6-09062
6-09061
6-09063
399-1
5225-XP
• Heavy-duty, high gloss, smooth Galaxy
white fibreglass VHF antenna with silver
plated elements and polyurethane finish
• “Silver Series” (extends
transmit/receive performance)
• Collinear-phased 5/8 wave elements
• Exceptionally efficient, heavy duty
antenna, ideal for superyachts, work
and fishing boat operators requiring
extended communications in all types
of conditions
• Stranded high quality tinned copper
inner conductor maximise signal
strength, combined with the copper
and silver plated brass elements will
provide extended performance and life
• Includes 6m RG-8X ultra low loss cable
cable and PL-259 connector (not
attached)
• Suggested mounts 4187 or 5187 (p.91)
• Gain: 6dBi
• Heavy-duty, smooth, two-sectioned
white gloss fibreglass VHF antenna
• Collinear phased 5/8 wave with
two coaxial chokes to suppress
cable radiation
• A highly efficient, professional
quality antenna combining strength
and performance
• Brass and copper elements
• 4.5m RG-58 cable and PL-259
connector (not attached)
• 2 sections: base 1.9m, tip 1m
• Suggested mounts 409-R or 410-R
for deck or side mounting (p.92)
• Antenna length: 3m (9.6ft)
• Gain: 6dBi
Part No. 6-09070
Mount not
included.
6-09070
Part No. 6-09068
6-09065
6-09068
85
Shakespeare VHF &
SSB/HF Antennas
ANTENNAS
5399
Galaxy white, two section fibreglass
VHF antenna with polyurethane finish
• Collinear phased 5/8 wave with two
coaxial chokes to suppress cable
radiation
• Strong, sturdy and self supporting,
providing exceptional performance for
commercial, fishing and leisure
applications in all conditions
maximum range and efficiency
• 6m RG-8X ultra low loss cable and
• 2 sections: base 1.9m, tip 1m
• Suggested mount 410-R mounting kit
(p.92)
• Antenna length: 3m (9.7ft)
• Gain: 6dBi
Part No. 6-09072
SHAKESPEARE SSB / HF
ANTENNA
5230
Galaxy white, two sectioned white
fibreglass VHF antenna with
polyurethane finish that will not yellow
in the sun
• 5/8 wave over 1⁄2 wave dipole.
The most effective 8dB antenna
system available
• Outstanding antenna, ideal for
commercial, fishing and superyacht
applications in all conditions
maximum range and efficiency
• 6m RG-8X ultra low loss cable and
• 2 sections: base 2.4m, tip 1.9m
• Suggested mounts 409R or 410-R
mounting kit (p.92)
• Gain: 8dBi
6-09073
SHAKESPEARE SPECIALITY COMMERCIAL VHF ANTENNAS
MD 70
MD 7A
• Extra heavy-duty, white, tapered,
mast or rail mount, end-fed
fibreglass antenna
• Ideal for work boats and fishing
vessels working in the toughest
environments
improved performance
• Integral, cast aluminium mounting
base with white gloss finish
• Mounts easily to rail and masts
using supplied U bolts
• 1m RG213 with N Jack
• Aluminium ferrule
• Gain: 3dBi
• Extra heavy-duty, mast mount,
white fibreglass dipole antenna
• Ideal for the extreme conditions
found on fishing vessels in the
North Sea type of environment and
on dhows in the Indian Ocean
• Aluminium and copper elements
for improved performance
• Supplied with extra heavy-duty
galvanised steel clamp set for
mast mount
• Gain: 3dBi
Part No. 6-09083
Part No. 6-09082
6-09082
86
6-09083
• Heavy-duty, smooth gloss, white,
three section, fibreglass SSB antenna
• Permanently sealed full length
conductors with no loading coil
• Reinforced insulation to allow power
up to 1kW
• Excellent value, this award winning
antenna is a high performing HF
communicator
• Side termination band
• 3 sections: base 2.3m, middle 2.3m,
tip 2.3m
• Suggested mounts 409R or 410-R
mounting kit (p.92)
• Gain: 1kW
Part No. 6-09104
Mount not
included.
Part No. 6-09073
6-09072
393
6-09104
For Antenna Mount
Accessories, see
pages 91 & 92
Shakespeare AIS
Antennas
ANTENNAS
SHAKESPEARE AIS ANTENNAS
HA 156C-AIS
• Lightweight, low windage,
compact helical AIS antenna
• A favourite for racing yachts
and sports boats
• Integral aluminium
mounting bracket
• 20m of RG-58 cable and
PL-259 connector
• Gain: 1dBi
Part No. 6-09120
MD 23-AIS
• Extra heavy-duty helical AIS antenna
for short range communications
withstand the most rugged conditions
• Watertight, strong, lightweight (0.3kg)
construction
• Supplied with 20m RG-58 cable plus
PL-259 connector and 180mm
aluminium bracket
• Gain: 1dB
Part No. 6-09121
5215-AIS SQUATTY BODY®
• Stainless steel whip AIS antenna for
sail boats
• Strong, lightweight and low profile
antenna with removeable whip
• Sealed, tin-plated copper wire coil for
performance and reliability
• Stainless steel “L” bracket supplied
for mast mounting or use optional
4716 or 4717 mast head mounts
(p.92)
• Matches 5215 (VHF)
• Gain: 3dBi
Part No. 6-09125
6-09120
6-09121
5250-AIS SKINNY MINI™
• Compact, strong, lightweight,
stainless steel whip AIS
antenna
• End fed 1⁄2 wave stainless steel
whip with chrome plated brass
canister
• Ideal for small power boats
• Matches 5250 (VHF)
• 4.5m of RG-58 cable plus
PL-259 plug. Requires a mount
with centre hole for cable
• Suggested mounts: 4187,
4188-S (p.91)
• Gain: 3dBi
Part No. 6-09126
AIS-MAST
• Heavy-duty stainless steel
whip AIS antenna
• Ideal for sail and power
boats to withstand the
most rugged conditions
• Watertight, strong,
lightweight (0.2kg)
construction
• Electronics are sealed in
epoxy for additional
protection
• Matches YWX (VHF)
• 20m RG-58 cable plus
PL-259 connector and
180mm nylon
cranked bracket
• Gain: 3dBi
Part No. 6-09127
6-09126
Detail
6-09125
5396-AIS LITTLE
GIANT™
• Heavy-duty, high gloss,
smooth, Galaxy white,
fibreglass VHF antenna with
polyurethane finish that will
not yellow in the sun
• End-fed 1⁄2 wave coaxial
sleeve
• Specially designed for AIS
systems, ideal for power
boats, work and fishing
boats operating in all types
of conditions
• Brass and copper elements
to maximise range and
performance
• 6m RG-8X ultra low loss
cable and PL-259 connector
(not attached)
• Suggested mounts 4187 or
5187 (p.91)
• Antenna length:
1.2m (3.9ft)
• Gain: 3dBi
AIS-COM
• Heavy-duty, mast mount,
white fibreglass dipole AIS
antenna
• Specially designed for the
extreme conditions found
on fishing vessels in the
North Sea type of
environment and on dhows
in the Indian Ocean
• Aluminium and copper
elements for improved
performance
• Supplied with extra heavyduty galvanised 4715 steel
clamp set for mast mount
• Gain: 3dBi
Part No. 6-09134
Part No. 6-09130
6-09127
6-09126
6-09130
6-09134
87
Shakespeare AM/FM
Antennas
ANTENNAS
SHAKESPEARE AM / FM ANTENNAS
4351
YRR AM/FM RIB RAIDER™
4350
• Black stainless AM/FM antenna
• Designed to avoid snagging and
excessive whip action, ideal for RIBs
and high speed craft
• Matches YRR (VHF)
• Integral black bracket with
mounting holes
• 4.5m of RG-62 cable with Motorola
type connector
• White fibreglass AM/FM antenna
• Features Shakespeare’s
exclusive distribution load for
improved reception
• Integral polycarbonate Lift and
Lay mount
• 3m of RG-62 cable with Motorola
type plug
• Nylon ferrule
Part No. 6-09141
Part No. 6-09143
• White fibreglass AM/FM antenna
• Features Shakespeare’s exclusive
distribution load for improved
reception
• 3m of RG-62 cable with Motorola
type plug
• Suggested mount style 4186 (p.91)
• Nylon ferrule
Part No. 6-09142
6-09143
6-09141
6-09142
5350-N
5420-XT / 5421-XT
LITTLE GIANT™
• Durable, smooth, gloss finished,
white fibreglass AM/FM antenna
• Good performance AM/FM
antenna, ideal for power and
work boats
• Includes 4.6m RG-62 cable plus
Motorola plug attached
• Matches 427-N VHF antenna
• Suggested mounts: 4186 (p.91)
• Nylon ferrule
• Heavy-duty, high gloss,
smooth Galaxy white (5420XT) or black (5421-XT)
fibreglass AM/FM antenna
with polyurethane finish that
will not yellow in the sun.
• An outstanding, heavy-duty
antenna, ideal for power
boats, work and fishing boats
operating in all types of
conditions
• Copper elements to maximise
range and performance
• 3.7m RG-62 coax cable plus
Motorola connector attached
• Matches 5400-XT / 5401-XT
(VHF), (p.36)
5187 (p.91)
Part No. 6-09146
5350-S
• Durable, smooth, gloss finished,
• A good looking and well
performing AM/FM antenna,
• Matches 427-S VHF antenna
5187 (p.91)
Part No. 6-09147
6-09147
Detail
Part No. 6-09145
(5420-XT - White)
6-09146
Detail
6-09144
6-09145
Part No. 6-09144
(5421-XT - Black)
6-09147
6-09146
88
NOTE: SHAKESPEARE DOES NOT RECOMMEND
CABLES RUN LONGER THAN 7.6m WITH AM/FM
ANTENNA SYSTEMS.
Shakespeare AM/FM
Antennas & Speakers
ANTENNAS
SHAKESPEARE AM / FM ANTENNAS
5120-S
5235-XT
Galaxy white fibreglass AM/FM
antenna with polyurethane finish
• Copper elements to maximise
reception ranges
• An outstanding performing, good
looking, heavy-duty AM/FM
antenna, ideal for power boats,
and superyachts operating in all
types of conditions
• 6m RG-62 cable plus Motorola
plug attached
• Matches 5225-XT (VHF)
(p.91)
• Durable, smooth gloss finished,
• A good looking and well
performing AM/FM antenna ideal
for power boats
• Matches 5101-S VHF antenna
(p.91)
4357-S
• VHF to AM/FM converter
• For use with VHF antennas where a separate
AM/FM antenna is not practical
• Ideal for sail boat applications
• Does not affect or interfere with the VHF
performance
• 3m RG-62 cable with Motorola plug (attached) plus
0.9m RG-58 cable for connection to VHF
Part No. 6-09150
Part No. 6-09149
6-09150
Part No. 6-09148
6-09149
6-09148
SHAKESPEARE LOUD SPEAKERS AND HAILERS
WS200-P
HS-5
• Weatherproof Deck Watch Loud Speaker
• Can be surface or flush mounted
• UV Resistant ABS construction
• Can be used on 4 or 8 ohm systems
• Overall diameter 14cm, depth 5cm
• Hole diameter of 11.6cm for flush mounting
• Output 5 watts, Impedance 8 ohms
• Weight 0.3 kilo • Blister packed
Part No. 6-09200
ES-2
• 5.7cm external speaker with Mylar cone
in a compact white housing
• 4 ohm speaker, 5 watts (RMS) input
• Rachet action mounting bracket
• 1.8m cable and 3.5mm phono plug
Part No. 6-09202
ES-4
• External Horn Speaker
• 12.7cm white plastic horn speaker
• 4 ohm speaker, 15 watts
(RMS) input
Part No. 6-09208
ES-4P
• 10cm deluxe speaker with Mylar cone in white
plastic case for protection against moisture
• 4 ohm speaker, 8 watts (RMS) input
• Swivel mounting bracket
• 1.8m cable with 3.5mm phono plug
Part No. 6-09204
• Same as ES-4 plus built in amplifier for
volume control
• Switchable attenuator to prevent overload
• Max audio level to 94dBA
• 3.5mm plug for audio input
• 12V DC Operation
Part No. 6-09205
89
Shakespeare TV
Antennas & Accessories
ANTENNAS
SHAKESPEARE ANYWHERE™ TV ANTENNAS & ACCESSORIES
Shakespeare AnyWhere™ HDTV antennas have been designed to
the highest specification to bring the best possible signal to your TV,
either on board, in a caravan or at home.
• Receives digital and terrestrial TV signals (DVB-T, ISDB-T, DMBT/H, ATSC) and DAB/FM radio
• Waterproof and weatherproof housing - made of UV resistant,
injection moulded ASA material for long term durability
90
• Omnidirectional reception - receives VHF, UHF, and FM signals
through 360º
• Built in high gain and low noise amplifier, shielded for minimum interference
• The use of SMD technology and micro electronics in the amplifier ensures
outstanding performance
• LTE filter is incorporated to eliminate interference from 4G mobile
communications
SA-HDTV-INDR1 AnyWhere Marine HDTV 8''
SA-HDTV-MAR8 AnyWhere Marine HDTV 8''
• 190W x 120H x 22D mm Indoor & Portable
HDTV antenna (with built-in LTE filter).
• Newly designed using the latest TV
technologies
• Attractive, gloss black, compact and
slim-line, indoor portable HDTV antenna.
Comes with built in high gain, low noise
amplifier and LTE filter. Ideal indoors and
below decks
• Set of screws and suction cups
• USB cable
• IEC to F connector
• AC/DC power adaptor (UK/EURO)
• Receiving range FM/VHF/UHF (VHF:87.5 – 230MHz UHF: 470-862)
• Gain: 28dB / Noise figure: 3dB
• Max. output level: 100 dBµV / Impedance: 75Ω
• Outputs: x 2 TV’s
Part No. 6-09160
• 203H x 110W mm (8'' x 4.3'') Omni Directional
HDTV antenna (with built-in LTE filter)
• Newly designed using the latest TV technologies
• Compact, lightweight, weatherproof HDTV
antenna. Comes with built in high gain, low noise
amplifier and LTE filter. Ideal for small power
boats and sail boats
• Includes amplifier gain control unit
• 10m 75 Ohm RG59 cable with 2 x F connectors
+ IEC to F connector
• 1.5m adapt cable fitted with F plug to IEC
• Power 12/24V DC - AC/DC power adaptor (UK/EURO) included
• Receiving range FM/VHF/UHF (VHF:87-230MHz UHF: 470-862)
• Fits to standard 1''-14 threaded mount
Part No. 6-09162
• 240mm (10'') Omni Directional HDTV antenna (with built-in LTE filter)
• Compact, lightweight, white ASA, weatherproof HDTV antenna. Comes
with built in high gain, low noise amplifier and LTE filter. Ideal for small
power boats and sail boats
• 25m 75 Ohm RG59 cable with 2 x F connectors + IEC to F connector
• Power 12/24V DC - AC/DC power
adaptor (UK/EURO) included
• Receiving range FM/VHF/UHF
(VHF:87-230MHz UHF: 470-862)
• Fits to 1''-14 threaded mount
Part No. 6-09164
• 380mm (14'') Omni Directional HDTV antenna (with built-in LTE filter)
• Compact, white ASA, weatherproof HDTV antenna. Comes with built in
high gain, low noise amplifier and LTE filter. Ideal for power boats and
work boats
• 25m 75 Ohm RG59 cable with 2 x F connectors + IEC to F connector
• Power 12/24V DC - AC/DC power adaptor (UK/EURO) included
• Receiving range FM/VHF/UHF
(VHF:47-230MHz UHF:
470-862)
• Fits to 1''-14 threaded mount
Part No. 6-09166
4366 SAILBOAT TV ANTENNA MAST MOUNT
TV-4S 4 WAY TV SPLITTER
Aluminium mast mount supplied with a 1'' - 14 thread fitting
for SA-HDTV-MAR8, MAR10 or MAR14 Part No. 6-09171
• 4 Way splitter for TV antennas
• Operating band 5MHz - 1000MKz
• Isolation >22dB, damping 6.9 - 8.0dB,
75Ω Impedance
• Die cast aluminium construction
• Connector type: F connectors
Part No. 6-09172
Shakespeare Antenna
Deck & Rail Mounts
ANTENNAS
SHAKESPEARE ANTENNA DECK MOUNTS
4186 NYLON RACHET MOUNT
4187 S/STEEL RACHET MOUNT
• Four-way nylon rachet mount with handle, for
deck or side mounting
• Standard 1''-14 thread
• Quick release lever allows antenna fold-down
• For antennas up to 2.4m in self support mode
• Stainless steel four-way swivel rachet mount
• Slot centre feed
• Sturdy construction, quality finish
Part No. 6-09250
Part No. 6-09251
5187 S/STEEL RACHET MOUNT
• Sleek s/steel four-way swivel rachet mount
• Fine angle control (5 degree steps)
• Slot centre feed
• Highly polished finish
Part No. 6-09252
4711 NYLON 25mm FLANGE MOUNT
4710 S/STEEL 25mm FLANGE MOUNT
• Heavy duty, 25mm high mount
• 70mm diameter base
• Ideal for GPS, marine TV and fibreglass
antennas up to 1.5m
• Standard 1''-14 thread (male)
Part No. 6-09253
4365 S/STEEL 110mm FLANGE MOUNT
• Moderate duty, low profile 25mm high mount
• 70mm diameter base
• Ideal for GPS, marine TV and fibreglass
antennas up to 1.5m
• Stainless steel fixed base mount
• 100mm high mount, 75mm dia. base
• Ideal for fitting to radar arches
• Excellent for GPS & marine TV antennas
Part No. 6-09254
Part No. 6-09255
SHAKESPEARE ANTENNA RAIL MOUNTS
4188-S RAIL RACHET MOUNT
4188-SL RAIL RACHET MOUNT
• Stainless steel rachet rail mount
• Quick release lever for quick, easy lay down
• Side slot for cable feed
• For 22 / 25mm vertical and horizontal rails
• Stainless steel rachet rail mount
• Quick release lever for quick, easy lay down
• For 25 / 38mm vertical or horizontal rails
Part No. 6-09260
Part No. 6-09261
4190 RAIL RACHET MOUNT
4721 NYLON RAIL MOUNT
• Stainless steel rail rachet mount
• Suitable for 22mm or 25mm vertical, horizontal
or angled rails
Part No. 6-09262
• Nylon rachet rail mount
• Attaches to 22mm / 25mm vertical,
horizontal and angled rails. Lever action 1''-14 thread
• Has hole for coax cable pass-through
4722 PLASTIC RAIL MOUNT
4720 S/STEEL RAIL MOUNT
• Sturdy plastic rail mount
• Attaches to 22mm & 25mm horizontal rails,
1''-14 thread
• Slot cable feed
• Stainless steel rail and bulk head mount
• This clever design allows a neat fit to 22, 25
and 32mm square or round rails
• Fits vertical or horizontal rails and flat surfaces
• Complete with nylon adapters
Part No. 6-09264
Part No. 6-09263
Part No. 6-09265
91
Shakespeare Antenna
Mounts, Brackets etc.
ANTENNAS
SHAKESPEARE MOUNTS, BRACKETS & ACCESSORIES
495-B LIFT ‘N’ LAY MOUNT
4716 STAND-OFF MAST BRACKET
• Nylon Deck Mount
• Enables antenna to lift ‘n’ lay with positive
snap action
• Levelling plate included for mounting to a
sloping deck
• Includes 3/8''-24 thread brass insert
• Durable plastic angled mast mount /
stand-off bracket
• Mounting screws not included
• 12.7cm high x stand-off
distance: 20cm
Part No. 6-09270
Part No. 6-09256
4717 MAST TOP BRACKET
YBR
ADAPT3 / ADAPT4
• Flat plastic bracket attaches to the top of a
mast for mounting Shakespeare’s low-profile,
base-loaded antennas
• Mounting screws not included
• Attaches easily to any flat, horizontal surface
• Dimensions (mm): 9.5 high x 45 wide x 200 long
• Right angle bracket as supplied with the RIB
Raider (p35 or p40)
• Black, aluminium
• Screws supplied
• 16mm diameter hole
• ADAPT3: Adapts SO-239 (UHF) male to 1'' x 14
TPI female thread (chrome plated brass) (converts 5215 & 5247 antennas to 1'' x 14 TPI)
Part No. 6-09283
Part No. 6-09273
Part No. 6-09271
• ADAPT4: Adapts M16 male to 1'' x 14 TPI
female thread - (converts YRR, YWX, YHK
antennas to 1'' x 14 TPI) Part No. 6-09284
SHAKESPEARE COMMERCIAL ANTENNA MOUNTS
4715 MOUNTING CLAMPS
• Galvanised steel mounting clamps for
mast mount
• Size: 260 x 40mm
• Aerial / Pole size: 25mm - 50mm dia.
• Supplied with rubber inserts
• For MD 7A (p.86)
Part No. 6-09305
410-R HEAVY DUTY
MOUNTING KIT
• Combines the 81-S s/s swivel mount
with the 408-R moulded upper bracket
• Insert to accept 25mm, 28mm, or 38mm
diameter antennas or extension masts
Part No. 6-09309
AHDVM HEAVY DUTY
VERTICAL MOUNT
• Stainless steel heavy duty, vertical
mount / pole mount with ‘U’ bolts and
nuts 1''-14 thread
• 90 x 90mm backing plate
• 120mm total height
Part No. 6-09311
409-R HEAVY DUTY
MOUNTING KIT
• Combines 407 and 408-R together
• 407 is a heavy duty chrome plated
brass swivel mount bracket. For deck or
side mounting
• 408-R is a white moulded heavy duty
plastic insulated stand off bracket
• Insert to accept 25mm, 28mm, or 38mm
diameter antennas or extension masts
Part No. 6-09315
92
Shakespeare Antenna
Spares & Accessories
ANTENNAS
SHAKESPEARE SWITCHES & TESTERS
4700 SERIES EXTENSION
MASTS (Heavy Duty)
AS-2 VHF AUTOMATIC SWITCH
ART-3 VHF TEST METER
• Automatic switch toggles two radios to one antenna
• When you transmit on one radio, it switches the
antenna to it automatically
• The radio stays locked onto the antenna, until the
switch detects a transmit from the other radio. Easy!
• Test receiver function
• Output power and VSWR (antenna
efficiency)
• Internal battery or 12V DC
Part No. 6-09322
Part No. 6-09323
• Heavy-duty stainless steel
extension mast
• Male upper, female lower 1''-14
threads
• Excellent for clearing an
obstruction
• One Section
Length
15cm
30cm
60cm
Part No.
6-09220
6-09221
6-09222
SHAKESPEARE ANTENNA SPARES & CABLE ACCESSORIES
ACC105 DECK PLUG
AND SOCKET
ACC106 DECK PLUG
AND SOCKET
ACC108 THRU DECK
GLAND
• Deck plug and socket
for RG-58 coaxial cable
with N type connectors,
shroud and screws
complete with 2
protective caps
• Blister packed
• Deck plug and socket
for RG-213 coaxial
cable with N type
connectors, shroud and
screws complete with
protective cap
• Blister packed
• Thru Deck Gland for
RG-58 and RG-2113
cable complete with
stainless steel screws
• Blister packed
Part No. 6-09340
Part No. 6-09341
• Contains:
1x BNC Plug
1x BNC Jack
2x RG-58
Shrouds
• Blister packed
Part No. 6-09342
Part No. 6-09343
ACC 158
SOLDERLESS
CABLE
TERMINATION
KIT
COAXIAL
ANTENNA
CABLE
CENTERPIN
PL-258-CP-G SERIES
ACC156 BNC JACK AND
PLUG AND RG-58
SHROUD KIT
CENTERPIN
PL-259-CP-G SERIES
• The easy way to splice coax for splicing
RG-58 A/U, RG-8/X
• No soldering or pairing back
• For RG-58 A/U, and RG-8/X
coaxial cable
• For installing a PL-259 connector
• No soldering or pairing back
Part No. 6-09350
Part No. 6-09351
100m reel of
RG-58 Ohm
Coaxial Cable
Part No. 6-09333
• For solderless
terminations on the
Hawk, Whipflex
and Raider
• Blister Packed
Cross section
Part No. 6-09344
SHAKESPEARE SPARES
YWA
YHA
YHI
Spare antenna for YWX Whipflex Part
No. 6-09010 (p.82)
Part No. 16-09010-1
Spare antenna for YHK Hawk Part No.
6-09011 (p.82)
Part No. 16-09011-1
Replacement wind indicator for YHK Hawk
Part No. 6-09011 (p.82)
Part No. 16-09011-2
93
Weaver Snap Davits
WEAVER SNAP DAVITS FROM POLYMARINE
A set of ingenious lock-on davit fittings to secure an inflatable boat or
RIB tender to the swim platform or transom of the main vessel. For
tenders up to 60kg (140lbs) in weight.
Two davit fittings are bolted onto the swim platform or transom of the
main vessel, the rubber pads and hooks are attached to the tender,
and these then clip into a locked position on each davit head,
allowing the tender to be secured and tilted into a vertical position.
• Safely board/alight your tender
• Strong & Robust dinghy Pads
• Reduced mooring fees in marinas
• Easy snap-on action to lock
• Little force required to release
RBD100 SNAP DAVIT - SWIMBOARD FIT
RBD150 SNAP DAVIT - TRANSOM MOUNT
Suitable for tenders up to 60kg (140lbs) in weight.
Complete boxed kit contains:
• 2x S/S Snap Davit fittings
screws/nuts/washers
required for fixing
• 2x large grey rubber pads
• 2x stainless steel hooks
Part No. 6-38101
Suitable for tenders up to 60kg (140lbs) in weight.
Complete boxed kit contains:
• 2x S/S Snap Davit fittings
screws/nuts/washers
required for fixing
• 2x large grey rubber pads
• 2x stainless steel hooks
Part No. 6-38110
RBD100 KIT WITH 2", 4" EXTENDED OR OFFSET
DAVIT HEADS
QUICK RELEASE SHOE FOR RBD 100 SNAP DAVIT
2" or 4" extended head,
or 4" out 4" down offset davit
head for curved swim platform.
Boxed kit for boats with a swim
platform comprises:
• 2x RP101 Pads (for attachment
to the inflatable or RIB tender)
• 2x RSH 120 Hooks
• 2x extended or offset head swim
platform mount Snap Davits
Description
2'' RBD100 Extended
4'' RBD100 Extended
4'' x 4'' RBD100 Offset
Part No.
6-38112
6-38114
6-38119
Pair of Stainless Steel shoes for RBD 100
kits for quick removal of davit heads.
Supplied with stainless steel fixing bolts and
quick release pin. The 'quick fit' allows for
quick removal of the davit heads so bathers
don't stub their toes or trip over the davit
heads.
Allows unhindered access to the bathing
platform. The shoes are bolted down to your
swim platform. By releasing the pin the davit Part No. 6-38150
head can be quickly and easily removed.
Stand-off Arms & Securing Pads
Stainless steel bracket arms secure the tender in a raised position on davits. Fixed by a bracket to the yacht transom at its highest point when the
tender is raised to 90 deg, and to a special moulded pad adhered to the upper part of the tender when raised. Provides security when underway
and removes strain on the davit fittings in keeping the tender at 90 deg. Arms Supplied in Pairs / Pad in Singles
STAND OFF ARMS
Supplied in pairs as a kit with 2x arms and 4x 'L' shaped brackets for
mounting. Fixed onto the tender with one arm secured with an 'L' shaped
bracket to the edge of the transom at its highest
Size
Part No.
point when the tender is raised to 90º on its davits,
12'' x Pair 6-38161
and the second arm to a special moulded pad
18'' x Pair 6-38162
which is adhered to the upper part of the tender
24'' x Pair 6-38163
when raised, (order pads separately).
30'' x Pair 6-38164
For a rigid tender two 'L' shape bracket fixings
36'' x Pair 6-38165
can be used.
94
RP101 LARGE RUBBER
PAD FOR RBD100/150
RSH120 HOOKS FOR
RP101 PAD
Replacement neoprene pad for
RBD kits
• RSH 120 hook fits into the pad
• To be bonded onto tube
• Colour: Grey
Part No. 6-38155
Replacement stainless steel hooks
for neoprene pad for RBD kits
• Supplied as a pair
• Supplied with S/S fixing bolts
• To fit into RP101 pad
Part No. 6-38156
RUBBER PAD FOR STAND-OFF ARMS
TOGGLES FASTENERS FOR DAVIT HEADS
Designed for attaching stand-off brackets to the tube/inflatable.
Two can be used on a soft
tail dinghy. Pad is bonded on
using adhesive. Colour: Grey.
Part No. 6-38168
The Toggler is placed through a pre-drilled hole and the
stainless steel plate expands out. Insert the bolt and
your davit head is attached. No more stripping inside to
get to the nuts. Part No. 6-38152
Marinco BEP
Pro Installer Series
ELECTRICAL
MARINCO BEP PRO INSTALLER SERIES
Onboard power demands continue to increase as boaters request the comforts of home on their
boats. Marinco and BEP looked at the common products used by electrical installers every day and
made significant improvements to their design and construction. The result is a robust product line
with greater capacity and extended product life.
The valuable space saved onboard gives builders or installers greater flexibility when designing
power systems. Since Pro Installer modular assemblies are designed for fast, flexible installation in
tight spaces, it's easy to “cluster” products and reduce their mounting footprint. The common
interconnection height enables solid link bars to connect multiple Pro Installer products – a smart
design feature for watercraft.
Like all Marinco products by BEP, you can be assured of durable construction engineered
specifically to handle the challenging marine environment. High-temperature, fiber-reinforced base
material provides strength and chemical resistance.
PRO INSTALLER EZ MOUNT BATTERY SWITCHES
The Pro-Installer EZ Mount battery switches make installation both quick and easy. Upward
facing studs on the switch base allow direct access to cable connections. The front actuator
knob and facia can then be fitted at any 90 degree rotated position to suit the cable runs in and
out of the switch. These switches can also be used with Pro-Installer link bars to create cluster
configurations to other Pro-Installer products.
• Surface mount installation
• Connects to other Pro-Installer
products using link bars
• Stainless steel nuts & washers
• Strong UV stabilized fibre
reinforced plastics
• IP66 rated
• Tested to UL1107 Ignition
Protection, CE Marked
8-93550
8-93551
Specifications:
Rating:
Continuous: 400A DC Intermittent: 600A DC Cranking: 1500A DC
Voltage:
48 V DC for 12 - 48V systems*
Dimensions :
L x W x H: 98 x 98 x 92mm (3.85'' x 3.85'' x 3.62'')
1
Fit
Base
2
Add
Wiring
3
Clip on
Actuator
NEW
NEW
* For 8-93553 both banks must be same voltage.
Part No.
8-93550
8-93551
8-93552
8-93553
Description
Operation
770-EZ Switch
On/Off
771-S-EZ-Selector Switch
1-2-Both-Off
770-DP-EZ Double Pole Switch
On/Off
772-DBC-EZ Dual Bank Control Switch 1, 1/2, Parallel, Off
Stud Detail
2 x 10mm (3⁄8 ")
3 x 10mm (3⁄8 ")
4 x 10mm (3⁄8 ")
4 x 10mm (3⁄8 ")
PRO INSTALLER STANDARD MOUNT BATTERY SWITCHES
Pro Installer standard mount battery switches can be surface mounted, rear panel
mounted or front panel mounted with multiple cable access options for easy installation,
and offer outstanding ergonomics engineered with materials to withstand the harsh
marine environment. PLEASE NOTE: the standard mount battery switches are not
suitable for use with link bars - use EZ mount instead.
Specifications:
Rating:
Continuous: 400A DC Intermittent: 600A DC Cranking: 1500A DC
Voltage:
48 V DC for 12 - 48V systems*
Dimensions : L x W x H: 98 x 98 x 92mm (3.85'' x 3.85'' x 3.62'')
8-93552 - Double Pole On/Off
Switch Used where positive
and negative supplies must be
isolated at the same time.
• Can be surface, rear panel or
front panel mounted
• Stainless steel nuts and washers
• Industry standard footprint
• Strong UV stabilized fibre
reinforced plastics
• IP66 rated
• Tested to UL1107 Ignition
Protection, CE Marked
8-93553 - Dual Bank Control
Switch combines the functions
of 3 battery switches into one
to intuitively manage 2 battery
banks and 2 loads.
8-93560 & 8-93561
* For 8-93564 both banks must be same voltage.
Part No.
8-93560
8-93561
8-93562
8-93563
8-93564
Description
Operation
770 Switch
On/Off
770-DP Double Pole Switch
On/Off
771-S Selector Switch
1-2-Both-Off
771-SFD Selector Switch
1-2-Both-Off**
772-DBC Dual Bank Control Switch 1,1/2, Parallel, Off
Stud Detail
2 x 10mm (3⁄8 ")
4 x 10mm (3⁄8 ")
3 x 10mm (3⁄8 ")
3 x 10mm (3⁄8 ")
4 x 10mm (3⁄8 ")
** PN 8-93563 battery selector switch is fitted with alternator field disconnect
SAFETY NOTE: 8-93561 & 8-93552 are not recommended for switching
house and start battery systems at the same time, for safety reasons.
You may need to isolate your engine battery in an emergency, but not your
house battery which typically powers the communications. For this
application please use the Dual Bank Control Switch (8-93564 or 8-93553).
8-93562 & 8-93563
8-93564
95
Marinco BEP
ELECTRICAL
MARINCO BEP PRO INSTALLER SERIES
Features and Benefits:
• Common interconnection height
makes it easy to ‘cluster’ products
• Modular assemblies offer unrivalled
flexibility in design/layout
• Reduced individual footprints save
additional space for the most
compact installations
• Robust construction for the harshest
of marine environments
Innovative clear covers
insulate/protect on three
sides, and include recesses
for convenient labelling
Covers feature snap-out side
skirts for additional cable entry
as required
Stainless steel studs,
washers and nuts
Tin plated copper
conductors
Radiused bar ends and
generous stud lengths
improve cable routing options
for large cables
High-temperature, fibre
reinforced base materials for
strength and chemical resistance
PRO INSTALLER HEAVY-DUTY BUSBARS
Providing a robust means to connect (bus) together the multitude large cables found in
modern electrical installations.
Specifications:
• 4 Stud-500A busbar: 8mm (5/16") stainless steel studs
• 3, 5, and 8 stud-650A busbars: 10mm (3/8") stainless
steel studs
• Studs treated with anti-seize lubricant
• 50 VDC
• Tinned CDA102 Copper conductors
• Stainless steel studs, washers, nuts for longevity
8-93502
in the marine environment
• Generous stud lengths, metric threads
Part No.:
Description::
Stud Detail:
Amps:
Dimensions (mm):
Dimensions (Inches):
Weight:
Footprint:
8-93501
3 Stud Busbar
3x 10mm (3/8")
650A
98 x 49 x 61
3.9" x 1.9" x 2.4"
294g (10.4 oz)
1x
8-93502
4 Stud Busbar
4x 8mm (5/16")
500A
98 x 49 x 61
3.9" x 1.9" x 2.4"
272g (9.6 oz)
1x
8-93503
5 Stud Busbar
5x 10mm (3/8")
650A
147 x 49 x 64
5.8" x 1.9" x 2.5"
506g (17.9 oz)
1.5x
8-93501
8-93504
8-93504
8 Stud Busbar
8x 10mm (3/8")
650A
249 x 49 x 64
9.8" x 1.9" x 2.5"
841g (29.7 oz)
2.5x
8-93503
PRO INSTALLER Z BUSBARS
Marinco BEP Products have created a completely new concept for small cable termination
with the Z-Bar range. These busbars maximize power density by utilizing high and low level
bars to optimize cable runs, saving even more installation space.
Specifications:
• 10 Way and 18 Way versions
• 4x 6mm (1/4") studs with anti-seize lubricant
• 4mm (5/32") terminals with captive lock washers
• 200A maximum per bar (2x 200A)
• 50 VDC
• Stainless steel studs, washers, nuts for longevity in the
marine environment
• Metric threads
Part No.:
Description:
Stud Detail:
Amps:
Dimensions (mm):
Weight:
Footprint*:
8-93510
10 Way Z Busbar
4x 6mm (1/4")
18 x 4mm (5/32")
2 x 200A
98 x 49 x 51
3.9" x 1.9" x 2.0"
203g (7.2 oz)
1x
8-93511
18 Way, Z Busbar
4x 6 (1/4")
18 x 4mm (5/32")
2 x 200A
147 x 49 x 51
5.8" x 1.9" x 2.0"
280g (9.9 oz)
1.5x
*See page 98 for footprint info.
96
8-93511
8-93510
Marinco BEP
ELECTRICAL
PRO INSTALLER ANL FUSE HOLDERS
These ANL fuseholders offer unparalleled circuit protection choice for both the installer
and end-user. The innovative Through-Panel fuseholder (8-93522) provides superior
access for fuse inspection and replacement. Small electrical loads are catered for with the
compact 8-93520 unit while additional cable security and highest capacity is provided by
the 8-93521, featuring additional studs for separate clamping of cables or link bars.
Specifications:
• Cable connection studs: Shared 8mm (5/16") on 8-93520
• 10mm (3/8") studs on 8-93522 and 8-93521
• Fuse mounting studs: 8mm (5/16")
• Double washers allow any ANL fuse brand to be fitted
• Fuse type: ANL or ANN (fast blow)
• Swinging fuse style allows changing fuse without
removal of fastening nuts
• Amperage: determined by fuse sizing,
8-93520 (35-300A), 8-93521 (35-750A),
8-93522 (35-500A)
• 50 VDC (or determined by fuse fitted)
• Tinned CDA102 copper conductors 8-93521
• Tinned CDA260 high conductivity brass
conductors 8-93522
Part No.:
Description:
8-93520
Fuseholder, ANL
Stud Detail:
2x 8mm (5/16")
Amps:
Dimensions (mm):
Weight:
Footprint*:
35 - 300A ANL
98 x 49 x 54
3.9" x 1.9" x 2.1"
143g (5.0 oz)
1x
8-93521
Fuseholder, ANL with
additional cable clamping studs
Fuse: 2x 8mm (5/16")
2x 10mm (3/8")
35 - 750A ANL
147 x 49 x 61
5.8" x 1.9" x 2.4"
330g (11.6 oz)
1.5x
8-93521
8-93520
8-93522
Fuseholder, ANL
through panel
Fuse: 2x 8mm (5/16")
2x 10mm (3/8")
35 - 500A ANL
98 x 49 x 36*
3.9" x 1.9" x 1.4"*
298g (10.5 oz)
1x
8-93522
Please note: The through panel fuse holder 8-93522 cannot be used with link bars.
PRO INSTALLER CLASS-T FUSE HOLDERS
Class-T fusing provides the ultimate protection for high power circuits, and where
extremely fast fuse blow characteristics are required. Modern battery technologies
such as Mastervolt Lithium Ion or AGM are capable of very high short circuit
currents which may be beyond the interrupt rating of standard circuit
breakers and other types of fuse. Two sizes of Pro Installer
Class-T Fuseholder are available which accommodate fuses
from 225-400 Amps, and 450-600 Amps respectively.
Specifications:
• Cable connection studs: 10mm (3/8") studs
• Fuse mounting studs: 10mm (3/8") 225-400A holder, 12mm (1/2")
450-600A holder
• Fuse type: Class-T (JLLN / TJN / A3T)
• Maximum amperage: Determined by fuse sizing, either 400A or 600A
• 50 VDC
• High temperature, fibre reinforced plastic base provides strength and
chemical resistance
• Clear polycarbonate cover
• Stainless steel studs, washers and nuts
for longevity in the marine environment
• Metric threads
8-93525
8-93524
Part No.:
Description:
Stud Detail:
8-93524
ClassT Holder
4x 10mm
Amps:
Dimensions (mm):
Weight:
Footprint*:
225-400A Class-T
147 x 49 x 61
5.8" x 1.9" x 2.4"
351g (12.4 oz)
1.5x
8-93525
ClassT Holder
Fuse: 2x 12mm (0.47")
2x 10mm (3/8")
450-600A Class-T
147 x 49 x 61
5.8" x 1.9" x 2.4"
382g (13.5 oz)
1.5x
97
Marinco BEP
ELECTRICAL
PRO INSTALLER INSULATED STUDS
Pro Installer Insulated studs are available in single and twin stud
versions, featuring 8mm (5/16") and 10mm (3/8") variants.
A double stud version with 10mm and 8mm studs is also included
for extending outboard motor cables. The Power Tapping Plate
single stud models provide convenient termination points for
additional small cables. Pro Installer family features are replicated
with these insulated studs, generous stud length, modular footprint,
insulating covers with label recess, common interconnection height.
Part No.:
Description:
Specifications:
• Power tapping plate: 4x 4mm (5/16") terminals
• Maximum current through power tapping plate: 50A per terminal (4x 50A maximum)
• Note: no power passes through the stud so no amp rating is given
• 50 VDC
• High temperature, fibre reinforced plastic base provides strength & chemical resistance
• Clear polycarbonate cover with snap-out extra cable access
• Stainless steel studs, screws and nuts for longevity in the marine environment
• Insert moulded studs with metric threads
• Double studs feature ‘snap out’ insulating partition, to allow linking of studs
8-93531
Single 8mm Insulated
Stud with 4mm
power tapping plate
Stud Detail:
1x 8mm (5/16") 1x 8mm (5/16")
Insulated Stud
4x 4 (5/32")
Amps:
–
Power Plate 4 x 50A
Dimensions (mm):
49 x 49 x 62
49 x 49 x 62
Dimensions (Inches): 1.9" x 1.9" x 2.4" 1.9" x 1.9" x 2.4"
Weight:
74g (2.6 oz)
106g (3.7 oz)
Footprint:
0.5x
0.5x
Part No.:
Description:
8-93530
Single 8mm
Insulated Stud
8-93540
Single 10mm
Insulated Stud
8-93541
Single 10mm Insulated
Stud with 4mm
power tapping plate
Stud Detail:
1x 10mm (3/8") 1x 10mm (3/8")
Insulated Stud
4x 4 (5/32")
Amps:
–
Power Plate 4 x 50A
Dimensions (mm):
49 x 49 x 62
49 x 49 x 62
Dimensions (Inches): 1.9" x 1.9" x 2.4" 1.9" x 1.9" x 2.4"
Weight:
85g (3.0 oz)
117g (4.1 oz)
Footprint:
0.5x
0.5x
*See below for footprint info.
8-93532
Double 8mm
Insulated Stud
2x 8mm (5/16")
Insulated Stud
–
49 x 49 x 62
1.9" x 1.9" x 2.4"
98g (3.5 oz)
0.5x
8-93530
8-93532
8-93531
8-93542
Double 10mm
Insulated Stud
8-93544
Double 10mm/8mm
Insulated Stud
2x 10mm (3/8")
Insulated Stud
–
49 x 49 x 62
1.9" x 1.9" x 2.4"
122g (4.3 oz)
0.5x
1x 8mm (5/16"), &
1x 10mm (3/8")
–
49 x 49 x 62
1.9" x 1.9" x 2.4"
110g (3.9 oz)
0.5x
8-93540
8-93542
8-93541
8-93544
Pro Installer Product Footprints
See individual products for
footprint size.
CREATING YOUR PRO INSTALLER POWER DISTRIBUTION CLUSTER
Pro Installer link bars allow fast and space saving electrical connection of Pro Installer products. Made from high purity copper, the link bars are tin plated
for optimum marine electrical performance. Link bars can also be doubled to increase amperage rating for higher loads. See next page for details >>>
Pro Installer cluster showing link bars fitted.
98
Finished cluster with covers and EZ-Mount battery switch.
Marinco BEP
ELECTRICAL
PRO INSTALLER LINK BARS
8-93590 (LB-1)
SE. Side to
End Linking
EE. End to End Linking
8-93591 (LB-2)
8-93593 (LBZ-1)
8-93592 (LBJ-2)
8-93596 (LBJ-3)
SS. Side to Side Linking
8-93597 (LBJ-4)
8-93594 (LBZ-2)
GAP. For small gaps between products
8-93598 (LBJ-5)
8-93599 (LBJ-6)
Ctr. Centreline Linking
Part No.
8-93590
8-93591
8-93592
8-93593
8-93594
8-93596
8-93597
8-93598
8-93599
OS. Offset Linking
Max Amps*
Description & Function
650
Short link bar 8 & 10mm studs
Link Bar 31 - 34.7mm
650
Medium link bar 8 & 10mm studs
Link Bar 35.5 - 42.5mm
650
Joiner 2-way 46 - 50mm Long link bar 8 & 10mm studs or side to side joiner 2 products
250
Link Z bus bar to Z bus bar end to end or back to back
400
Link Z bus bar to HD bus bar or fuse holder
525
3 way side to side product joiner
450
400
350
L x W in
2.2 x 1.0
2.8 x 1.0
3.0 x 1.0
2.0 x 0.5
2.1 x 1.0
4.9 x 1.0
6.9 x 1.0
8.8 x 1.0
10.8 x 1.0
L x W mm Pack Qty
1
56 x 25
1
69 x 25
1
74 x 25
1
49 x 12
1
53 x 25
1
123 x 25
1
172 x 25
1
221 x 25
1
270 x 25
* Pro Installer links can be double for high load applications, e.g. 2 x 8-93598 5 way joiners can be use to double the maximum amp rating from 400 to 800 amps. Please note
that the amp rating reduces for studs positioned further away from the main battery +/- cable, therefore high loads should be positioned on adjacent main battery +/- cable.
Pro Installer Link Bar Selection Guide
Pro Installer
Component
HD Bus Bars
ANL Thru
Panel Fuse
Holder
ANL & Class T
Stud Fuse
Holders*
Single Insulated
Studs
HD Bus Bars
8-93590
8-93594
5-93590
N/A
8-93590
8-93591
Z Bus Bars
ANL Fuse
Holder
ANL Thru Panel
Fuse Holder
ANL & Class T
Stud Fuse Holders*
Sgl Insulated
Studs
Dbl Insulated
Studs
EZ Mount Battery
Switch On/Off
EZ Mount
Selector Switch
'Battery' Studs
EZ Mount
Selector Switch
'Common' Studs
8-93594
8-93590
5-93593
8-93594
8-93594
8-93591
N/A
N/A
8-93594
8-93590
N/A
8-93591
N/A
N/A
N/A
8-39591
N/A
N/A
8-93590
8-93594
8-93590
N/A
8-93590
8-93591
8-93591
N/A
8-93591
N/A
8-93591
SE. Link 8-93590
Gap Link 8-93590
OS. Link 8-93591
Ctr. Link 8-93590
8-93591
8-93594
SE. Link 8-93590
Gap. 8-93590
OS. Link 8-93591
Ctr. Link 8-93590
8-93591
N/A
SE. Link 8-93590
Gap. 8-93590
OS. Link 8-93591
Ctr. Link 8-93590
OS. Link 8-93590
Ctr. Link 8-93591
OS. Link 8-93591
Ctr. Link 8-93590
Z Bus Bars ANL Fuse Holder
8-93594
8-93594
8-93594
OS. Link 8-93591
Ctr. Link 8-93590
N/A
N/A
N/A
Double Insulated
EZ Mount
Studs
Battery Switch
SE. Link 8-93590
Gap Link 8-93590
Gap Link 8-93592
SE. Link 8-93590
Gap Link 8-93590
N/A
OS. Link 8-39591
Ctr. Link 8-93590
Link 8-93594
OS. Link 8-39591
Ctr. Link 8-93590
N/A
SE. Link 8-93590 OS. Link 8-39591
Gap Link 8-93590 Ctr. Link 8-93590
8-93592
8-93590
8-93592
Ctr. Link 8-93591
8-93590
SS. Link 8-93592 OS. Link 8-93590
Gap Link 8-93590 Ctr. Gap Link 8-93590
OS. Link 8-93592 OS. Link 8-93590
8-93590
Ctr. Link 8-93591 Ctr. Gap Link 8-93590
8-93592
8-93590
N/A
OS. Link 8-93591 OS. Link 8-93592 OS. Link 8-93590
Ctr. Link 8-93590 Ctr. Link 8-93591 Ctr. Gap Link 8-93590
N/A
* Relates to 2 Stud Fuse Holders 8-93521, 8-93524 & 8-93525.
99
Blue Sea Dual USB
Chargers & Fuse Block
ELECTRICAL
DUAL USB CHARGERS Two USB ports with protective cap
Protective dust cap with tether keeps dust and spray from shortening
the life of the charger. Made with corrosion resistant materials which
ensure a solid contact and low voltage drop.
• Compatible with popular mobile devices including Apple® products
• Protective dust cap
• Conformal coated circuit board for the harsh marine environment
• Easy to use
8-21016
Dual USB Chargers (8-21016, 8-21016200, 8-21018)
Easy to install in existing 12V DC socket hole providing convenient
access for charging mobile devices
Dual USB Contura Switch Mount Chargers (8-21019, 8-21039)
Easy to install in existing Contura switch aperture providing convenient
access for charging mobile devices
Specifications:
Maximum Output Current:
Input Voltage:
Input Voltage Range:
Output Voltage:
Parasitic Current Draw:
Thermal Overload Protection:
Short Circuit Protection:
Reverse Polarity Protection:
USB:
8-21016 / 8-21016200 /
8-21019
2.1A DC (total)
12V DC
9-16V DC
5V DC ±5%
15mA
Yes
Yes
Yes
2.0
8-21018 / 8-21039
2.1A DC (total)
12-24V DC
9-32V DC
5V DC ±5%
15mA
Yes
Yes
Yes
2.0
8-21019 / 8-21039
Voltage
12V DC
12V DC
12 /24V DC
12V DC
12 / 24V DC
Colour
Black
White
Black
Black
Black
Regulatory:
FCC Part 15:
Subpart B Compliant
8-21018
Cut Out Dimensions:
for 8-21016 / 8-21016200 / 8-21018: 11⁄8 " (29mm) dia. hole
for 8-21019 / 8-21039: 1.45" x 0.83" (36.83mm x 21.08mm)
Part No.
8-21016
8-21016200
8-21018
8-21019
8-21039
8-21016200
12V SOCKET-PLUG SYSTEM
Description
Dual USB Charger Socket
Dual USB Charger Switch Mount
Dual USB Charger Switch Mount
White socket
now available.
Part No. 8-21011200
See Section 8 for
socket - plug
complete system
ST BLADE SPLIT BUS FUSE BLOCK Screw Terminal
Split ATO®/ATC® fuse block with ground and insulating cover. For use when
a mix of switched and 24-hour circuits are desired in the same block.
• Provides two isolated groups of six ATO®/ATC® circuits
• For use with either two isolated batteries or with a single battery providing
a mix of 24 hour and switched circuits
• Screw terminals for securing wires accept ring terminals
• One-piece stainless flange nuts ensure safe and secure connections
• Clear insulating cover with label recesses and storage for two fuses,
satisfies ABYC/USCG insulation requirements
• Easy to open, push button latch for easy access to fuses
• Tin-plated copper buses and fuse clips
• Fuses sold separately (see Section 8)
Specifications
Voltage Max. Operating:
Amperage Max. Operating:
Fuse Type:
Screw Terminal:
Mounting:
100
32V DC
30A (per circuit)
100A (per block)
ATO® or ATC® Fuses
#8-32 Screws with captive star lock washer
#8 Screw (M4)
Part No. Circuits
8-25032
12
Cover
Yes
Negative Bus
#10-32 stud
Positive Bus
#10-32 stud
Blue Sea Busbars
& Fuse Blocks
ELECTRICAL
ST-BLADE BATTERY TERMINAL
MOUNT FUSE BLOCK Screw Terminal.
BATTERY TERMINAL MOUNT BUSBARS
Easy to install.
Positive and Negative
Part No. 8-22340
Easily add up to 4 fused circuits with insulating cover
to the terminal of a battery. Provides power to new
accessories in your boat or vehicle.
•
•
•
•
•
•
•
Easy to install 4 ATO®/ATC® fused circuits
Mounts on the battery terminal stud
Screw terminals for securing wires
Four Nylon insulated ring terminals included
Insulating cover included
Accepts small format circuit labels (see Section 8, p.77)
Includes 1 fuse (see Section 8, p.51 for blade fuses)
Part No. 8-25023
Specifications:
Fuse Type:
Screw Terminal:
Mounting Thru-hole:
Part No. 8-25023
32V DC
30A (per circuit)
100A (per block)
ATO® or ATC® Fuses
#8-32 Screws with
captive star lock washer
Clearance for 3/8" [M10] stud
Specifications
Continuous Rating:
Bus Material:
Mounting Thru-hole:
Screw Terminal:
Regulatory:
Designed to meet ISO
8846 and SAE J1171
external ignition
protection requirements.
Pending Testing.
Screw Terminal. Easily installed battery terminal
mount 4 ATO®/ATC® Fuse Block and negative BusBar.
8-21990
8-21991
Specifications:
Continuous Rating:
Mounting Holes:
Bus Material:
Audibly alerts operator
• Adjustable volume by rotating bezel
• Tamper resistant front mounting case
• Threaded attachment ring
• Fits any 1'' round aperture
Specifications:
Nominal Voltage:
Operating Voltage:
Terminal Type:
Operating Current:
• Easy to install 4 ATO®/ATC® fused circuits
• Mounts on the battery terminal stud
• Screw terminals for securing wires
• Eight nylon ring terminals included
• Includes 8-25023 and 8-22340
• Insulating cover included
Part No. 8-25024
Complex wiring systems require a single point to consolidate large
and small conductors. The PowerBar 1000 offers a 1,000A busbar
with various size studs and screws to connect conductors and fuse
blocks. A snap-on insulating cover is included in retail packages.
FLOYD BELL TURBO SERIES ALARM
Part No. 8-21070
ST-BLADE BATTERY TERMINAL MOUNT FUSE BLOCK KIT
POWERBAR 1000 - 1000A Common BusBar
Operating Frequency:
12/24V DC
5-30V DC
Male Quick Connect
25mA @ 30V DC
5mA @ 5V DC
2900 ± 250 Hz
3 ± 25% Beeps/Second
• 1,000 Amp busbar for large complex wiring systems
• Tin plated pure electrical copper for maximum conductivity
• Stepped bus design offers two elevations for conductors which doubles the density of
the wire loom compared to traditional bus bars
• Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse
block attachment, eliminating the need for connecting cables
• One-piece serrated flange nuts ensure correct and secure connections
• Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires
• Busbar may be cut to a shorter length to accommodate constricted spaces
• Bi-directional busbar end caps allow the ganging of additional busbars
• Snap on insulating cover meets ABYC & USCG requirements & includes label recess
• Models available to accommodate
either 3⁄8 " or 5⁄16 " terminals
8-21993
8-21992
1000A
150V
Accepts #10 (M5) Screws
Tin-Plated Copper C11000
100A DC
32V DC
Tin-Plated Copper C11000
Clearance for Ø3/8 [M10] stud
#8-32 screws with Captive Star
Lock washer
Part No.
8-21990
8-21991
8-21992
8-21993
Cover
Yes
Yes
Yes
Yes
Terminal Stud
8 × 3 ⁄ 8" - 8
12 × 3 ⁄ 8" - 12
8 × 5 ⁄ 16" - 8
12 × 5 ⁄ 16" - 12
Terminal Screw
5 x #10-24, 11 x #8-32
5 x #10-24, 11 x #8-32
5 x #10-24, 11 x #8-32
5 x #10-24, 11 x #8-32
101
Mastervolt Battery
Monitors, Battery Boxes
BATTERY ACCESSORIES
NEW RANGE
BATTMAN LITE & BATTMAN PRO BATTERY MONITORS
12/24V DC battery monitors, with a large, splash proof display (IP65) and power bar.
Battman Pro also displays remaining time and stores special battery status events.
The Battman Lite is an affordable battery
monitor that does exactly that: providing critical
information about the status of your battery
bank under all circumstances. Moreover it will
warn you when your battery bank is empty.
The Battman Pro does all the above but also
displays the remaining time until your battery
needs to be charged and stores special battery
status events.
Part No.:
Model:
M70405060
Battman Lite
M70405070
Battman Pro
Languages on Display:
Dimensions, H x W x D:
Dimensions Shunt, H x W x D:
Built-in Depth incl./excl. cover box:
Weight:
2; Service (fully), Starter (voltage)
Voltage, Current, Amp-hours,
Battery Capacity in %
Universal
Ø 64/79mm (2.5 / 3.1 inch)
M8 - 87 x 45 x 35mm (3.4 x 1.8 x 1.4 inch)
Ø 52/79mm (2 / 3.1 inch)
0.15kg (0.3 lb)
2; Service (fully), Starter (voltage)
Voltage, Current, Amp-hours, Time Remaining,
Battery Capacity in %, special battery status events
Universal
Ø 64/79mm (2.5 / 3.1 inch)
M8 - 87 x 45 x 35mm (3.4 x 1.8 x 1.4 inch)
Ø 52/79mm (2 / 3.1 inch)
0.15kg (0.3 lb)
Max. Ah Capacity:
Supply Voltage:
Voltage Range:
Current Consumption (backlight off):
Current Consumption (backlight on):
Voltage Resolution:
Voltage Accuracy:
Shunt Specification:
Current Measurement Range:
Current Accurancy:
Battery Alarm Contact:
Remaining Time Indication:
Historical Data:
MasterBus Compatible:
Connection Cable (6-wire) Necessary:
Modular Cable Necessary:
9999 Ah
9-35V
0-35V
8mA / 12V, 6mA / 24V
30mA / 12V, 18mA / 24V
0.1V
± 0.3%
500 A/ 50mV (service set)
0-500A (optional 900A / 50mV)
± 0.4 %
Yes, potential free
No
No
No
Yes
No
9999 Ah
9-35V
0-35V
8mA / 12V, 6mA / 24V
30mA / 12V, 18mA / 24V
0.01V
± 0.3%
500 A/ 50mV (service set)
0-500A (optional 900A / 50mV)
± 0.4 %
Yes, potential free
Yes
Yes
No
Yes
No
General Specifications:
Number of Battery Outlets:
Display/Read-out:
SNAP-TOP BATTERY BOXES
• Strong injection moulded polypropylene construction
• Snap-Top secures and locks lid to prevent contact with battery terminals
• Ventilated lid, included securing strap
• Large battery box can be adjusted to suit battery size (8-41324 only)
Inside view
P/No. 8-41324
102
Description
Small
Inside Dim. (LxWxH)
279 x 200 x 247mm
(11.00'' x 7.88'' x 9.75'')
Outside Dim. (LxWxH)
359 x 254 x 267mm
(14.13'' x 10.00'' x 10.50)
Part No.
8-41322
Large
368 x 200 x 247mm
(14.50'' x 7.88'' x 9.75'')
448 x 254 x 267mm
(17.63'' x 10.00'' x 10.50)
8-41324
LIGHTING
LED TRILITE
• Choice of 2 lighting options 320 or 640 lumens
• Brighter than the Fluorescent equivalent & lower power consumption
• Quick to install - fits in place of old fluorescent Trilite
• Long life Cree LEDs; no replacement costs
• Low profile design & integrated switch
NEW
Part No
8-13209
8-13210
8-13214
8-13215
Voltage Range:
12V DC
24V DC
12V DC
24V DC
Average Current:
0.33A
0.15A
0.66A
0.33A
Light Output:
320Lm
320Lm
640Lm
640Lm
LED Power:
3W
3W
6W
6W
Overall size (LxWxD): 381x78x24mm 381x78x24mm 381x78x24mm 381x78x24mm
Weight:
0.18kg
0.18kg
0.20kg
0.20kg
Temp Range:
-30 to +40ºC
-30 to +40ºC
-30 to +40ºC
-30 to +40ºC
IP Rating:
IP50
IP50
IP50
IP50
FLUX
TRILITE TRIMS
Optional decorative
trim surrounds
available.
Ivory P/No. 8-13211
Silver P/No. 8-13213
Gold P/No. 8-13212
LABCRAFT HALOGEN LIGHT
NEW
• Choice of 2 lighting options:
562 or 2250 lumens
(over 770 lux @ 1m)
• Anti-glare light guide
• 100% dimmable
• High and low light options on 30W versions
• Slim, low profile surface mount design – only 11 mm
RONDO 2
Part No
8-13360
8-13361
8-13366
8-13367
Voltage Range:
10-15V DC
20-28V DC
10-15V DC
20-28V DC
Average Current:
0.63A
0.31A
2.5A
1.3A
Light Output:
562Lm
562Lm
2250Lm
2250Lm
LED Power:
7.5W
7.5W
30W
30W
Overall size (LxWxD): 307x90x11mm 307x90x11mm 570x90x11mm 570x90x11mm
Weight:
0.25kg
0.25kg
0.54kg
0.54kg
Temp Range:
-30 to +40ºC
-30 to +40ºC
-30 to +40ºC
-30 to +40ºC
IP Rating:
IP50
IP50
IP50
IP50
• Surface mount compact round utility light
• White finish with clear lens
• Supplied with 12V 10W halogen bulb
• Integrated on/off rocker switch
• Can be used with Blue Sea Digital Dimmers
Part No.:
8-13235
Supply Voltage:
12V DC
Voltage Range:
10 to 14V DC
Average Current:
0.85A
Bulb Watts:
10W G4 Halogen
Lumens:
140Lm
Size (Dia x Depth):
147 x 37mm
Weight:
0.10 kg
Temp Range:
-10 to +40ºC
Replacement 12V 10W G4 bulb, use 8-13123P (Pk10)
LOCKERLITE
8-13340 - Switched
NOVALUX
NEW
8-13341 - Recessed
Part No
8-13340
8-13341
Voltage
Range:
10-32V
DC
10-32V
DC
• 320 lumens; over 170 lux @ 1M
Average Current:
0.48A (12V) 0.26A (24V)
• Low profile surface mount and
Light Output:
320Lm
320Lm
recessed options
LED Power:
2.5W
2.5W
• Multi-voltage (10-32V)
Overall size (LxWxD):
120 x 55 x 14mm
• Integrated switch (surface mount)
Weight:
0.062kg
0.062kg
• Waterproof to IP66
Temp Range:
-30 to +40ºC
-30 to +40ºC
(recessed option)
IP Rating:
IP60
IP66
• Easy installation into any locker or cupboard
• Door operated on/off microswitch
• Supplied with 2 x 3V CR2025
Lithium batteries
Part No.:
Overall Size (LxWxD):
8-13332
60 x 30 x 15mm
103
LIGHTING
Power Nebula
(switched version)
NEW
Nebula (switched version)
POWER NEBULA
& NEBULA
• Choice of lighting up to
1108 lumens
• Tough aluminium low
profile housing
• Switched or unswitched
versions available
• Waterproof to IP66 (IP40
for switched version)
Part No (Unswitched)
8-13310
Part No (Switched)
8-13309
Model:
Power Nebula
Voltage Range:
10 to 15V DC
Average Current:
0.33A
Light Output:
320Lm
LED Power:
3W
Overall size (LxWxD): 376 x 44 x 15mm
Temp Range:
-30 to +40ºC
Weight:
0.22kg
IP Rating (Switched):
IP40
IP Rating (Unswitched):
IP66
8-13311
8-13314
Nebula
10 to 14V DC
0.88A
1108Lm
12W
1124 x 44 x 15mm
-30 to +40ºC
0.7kg
IP40
IP66
8-13312
8-13315
Nebula
20 to 28V DC
0.44A
1108Lm
12W
1124 x 44 x 15mm
-30 to +40ºC
0.7kg
IP40
IP66
–
8-13316
Nebula
10 to 14V DC
0.44A
554Lm
6W
1124 x 44 x 15mm
-30 to +40ºC
0.38kg
IP40
IP66
Integrated
switch
NEW
APOLLO
Part No.
Voltage Range:
• Choice of lighting up to
Average Current:
1108 lumens
Light Output:
• Integrated switch
LED Power:
• Choice of 3 lighting angles Overall size (LxWxD):
• Quick and easy to install
Temp Range:
Weight:
IP Rating:
8-13334
10 to 14V DC
0.44A
554Lm
6W
360 x 37 x 16mm
-30 to +40ºC
0.08kg
IP50
8-13335
20 to 28V DC
0.22A
554Lm
6W
360 x 37 x 16mm
-30 to +40ºC
0.08kg
IP50
8-13336
10 to 14V DC
0.88A
1108Lm
12W
610 x 37 x 16mm
-30 to +40ºC
0.13kg
IP50
ASTRO
• Surface mounted 45º angled light
• Wide light spread, perfect for work areas, lockers and much more
• Slim aluminium housing with concealed fixings and ABS end caps
Can be used with Blue
Sea Digital Dimmers
ORIZON
• Surface mount LED strip light unit
• Fitted with 24 high intensity LEDs
• Quick and easy to install - choice of
fixing methods
• Can be used with Blue Sea Digital
Dimmers
104
Part No.:
Voltage Range:
Average Current:
Light Output:
LED Power:
Size (LxWxD):
Temp Range:
Weight:
IP Rating:
8-13323
8-13324
10 to 14V DC
20 to 28V DC
0.44A
0.22A
554Lm
554Lm
6W
6W
522 x 18 x 11mm 522 x 18 x 11mm
-30 to +40ºC
-30 to +40ºC
0.08kg
0.08kg
IP66
IP66
Part No.:
Voltage Range:
Average Current:
LED Power:
Light Output:
Size (Lx W x D):
Temp Range:
Weight:
IP Rating:
8-13337
20 to 28V DC
0.44A
1108Lm
12W
610 x 37 x 16mm
-30 to +40ºC
0.13kg
IP50
8-13320
10 to 14V DC
0.44A
6W
554Lm
593 x 43 x 31mm
-30 to +40ºC
0.44kg
IP66
Orizon lights can be fixed using the mounting
caps or metal clips.
Metal mounting clips (pair) P/No. 8-13325/2P
Plastic mounting caps (pair) P/No. 8-13326/2P
LIGHTING
CALLISTO
• Recessed compact design,
only 58mm overall diameter
• Fitted long life high intensity
Cree LED’s
• Choice of brushed chrome or
white plastic bezels
Part No.
Voltage Range:
Average Current:
Light Output:
LED Power:
Cutout Size (Ø x Depth):
Weight:
Temp Range:
IP Rating:
LED MAP LIGHT
White
Brushed Chrome
8-13350
8-13351
Brushed Chrome
White
10 to 32V DC
10 to 32V DC
0.16A (12V) 0.09A (24V)
160Lm
160Lm
1.25W
1.25W
38 x 10mm
38 x 10mm
0.03kg
0.03kg
-30 to +40ºC
-30 to +40ºC
IP50
IP50
MICROLUX
• Robust, ultra slim design, only 15mm depth
• Fitted long life, high intensity Cree LED’s
• 320 Lumens, over 170 Lux at 1 metre
POWERLUX
• Robust, ultra slim design, only 17mm deep
• 900 Lumens, over 500 Lux
at 1 metre
LED SCENELITE
• Unique robust surface
mount design
• Over 1700 Lumens with
light projections covering
over 50m2
POLE LIGHT
• LED Illuminated pole for wardrobes, strong enough for hanging clothing
• Adaptable to fit required wardrobe width from 550 to 600mm wide
• Contains 30 high intensity LEDs contained within a tough polycarbonate lens
NEW
Part No.:
Voltage Range:
Average Current:
Light Output:
LED Power:
Size (L x W x D):
Temp Range:
Weight:
IP Rating:
• Dual colour
• Very low power only 0.07A @ 12V
• Durable adjustable arm
• Slimline design
• Integrated switch
8-13224
10 to 14V DC
0.07A
72Lm
0.85W
480 x 36 x 18mm
-30 to +40ºC
0.02kg
IP40
Part No.:
Supply Voltage:
Voltage Range:
Ave. Current:
LED Watts:
Lumens:
Size (LxWxD):
Weight:
Temp Range:
8-13225
20 to 28V DC
0.035A
72Lm
0.85W
480 x 36 x 18mm
-30 to +40ºC
0.02kg
IP40
8-13300
12-24V DC
10 to 32V DC
0.22A (12V), 0.12A (24V)
2 x 1.25W = 2.5W
320Lm
128 x 100 x 15mm
0.165kg
-30 to +40ºC
Part No.:
8-13304
Supply Voltage:
12-24V DC
Voltage Range:
10 to 32V DC
Average Current:
0.67A (12V), 0.32A (24V)
LED Watts:
5 x 1.24W = 7W
Illuminance:
275 @ 1m 60 @ 2.6m
Total Lumen Output:
900Lm
298 x 100 x 17mm
Weight:
0.46kg
Temp Range:
-30 to +40ºC
Part No.:
8-13308
Supply Voltage:
12-24V DC
Voltage Range:
10 to 32V DC
Average Current:
1.5A (12V), 0.75A (24V)
LED Watts:
6 x 3W = 18W
Total Lumen Output:
>1704Lm
310 x 82 x 38mm
Weight:
0.45kg
Temp Range:
-20 to +40ºC
Part No.:
Supply Voltage:
Voltage Range:
Average Current:
LED Watts:
Total Lumen Output:
Overall Size (L x Dia.):
Weight:
Temp Range:
8-13328
12V DC
10 to 16V DC
0.18A
2.2W
130Lm
(500 to 600) x 75mm
0.43kg
-30 to +40ºC
105
Barigo Marine
Instruments
NEW RANGE
SHIPS INSTRUMENTS
Precise, reliable function, clever design, sturdy construction
and uncompromisingly precise workmanship – a BARIGO
instrument means quality and longevity you can feel.
106
TEMPO BAROMETER
TEMPO CLOCK
TEMPO THERMO/HYGROMETER
Dial: 85mm Ø. Case: 110 x 32mm. Weight: 130g
Polished Brass. Part No. 6-08000
SKY BAROMETER
SKY CLOCK
SKY THERMO/HYGROMETER
Polished Stainless Steel. Part No. 6-08005
VIKING BAROMETER
VIKING CLOCK
VIKING CLINOMETER
VIKING BAROMETER
VIKING CLOCK
VIKING CLINOMETER
Polished Chrome. Part No. 6-08015
All Clocks require a 1.5V AA LR6 Battery
(not included).
Barigo Marine
Instruments
SHIPS INSTRUMENTS
ADMIRAL CLOCK
ADMIRAL HYGROMETER
Dial: 100mm Ø. Case: 140 x 80mm. Weight: 1kg
Polished Brass, Silver finish dial.
Part No. 6-08020
Part No. 6-08021
Part No. 6-08022
ADMIRAL BAROMETER
ADMIRAL CLOCK
ADMIRAL COMFORTMETER
Polished Chrome, white dial.
Part No. 6-08025
Part No. 6-08026
Part No. 6-08027
NEW RANGES
ADMIRAL BARO/THERMOMETER
WEATHER STATION
With Barometer, Clock and Thermometer/ Hygrometer
CAPTAIN BARO/THERMOMETER
Dial: 150mm Ø. Case: 210 x 50mm. Weight: 1.1kg
Polished Brass, Mahogany Display
Part No. 6-08030
CAPTAIN CLOCK
Polished Brass, Mahogany Display
Part No. 6-08031
Dials: 85mm Ø. Case: 370 x 130mm. Weight: 770g
Polished Brass, Mahogany Case.
Part No. 6-08035
BARO/THERMO/HYGROMETER
Dial: 70mm Ø. Case: 160 x Ø110mm.
Weight: 525g. Polished Brass,
Mahogany Case. Part No. 6-08040
BAROGRAPH
Case: 195 x 125 x 127mm. Weight: 1.28kg
Polished Brass, Mahogany Case.
Requires a 1.5V AA LR6 battery (not included).
Part No. 6-08045
Spare Paper Charts (53) Part No. 6-08050
Spare long duration felt tip pen Part No. 6-08051
107
Caframo Marine Fans
MARINE FANS
NEW RANGE
CAFRAMO MARINE FANS have been designed, tested and built for demanding marine use, to make
sure they can withstand sea conditions and the effects of pounding waves. All fans are supplied
without a plug so they can be hard wired into the boat’s DC power system.
BORA 5'' FANS
The Bora fan features a long-life
5000+ motor with centre push control,
grills on front and back and built-in
handle for easy up/down or side-toside positioning.
Dimensions:
Depth: 10cm (4")
Width: 16.5cm (6.5")
Height: 24cm (9.5")
High
12V DC 0.24A
24V DC 0.14A
Amp Draw
Medium Low
0.18A 0.15A
0.10A 0.06A
Features & Benefits
• 3 speed push control
• Newly designed high efficiency blade
• Locking cam mount
• Low power draw
• Maximum airflow with minimum noise
• Fan stays in place in rough seas
• Mounts sideways upright or downwards
• Permanent screw down base
• CFM*: 100 - 130
Voltage White P/No. Black P/No.
12V
6-11700
6-11701
24V
6-11702
6-11703
Hatch not
supplied
TAKU HATCH FAN
SIROCCO 7'' FAN
ULTIMATE 7'' FAN
Keep cool with this easy-to-install, suction cup
mounted hatch fan featuring push button controls
and built-in LED cabin light. This versatile pivoting
axis fan can be swivelled to exhaust air out of the
cabin or to bring fresh air in.
Operation includes 3 comfort speeds and a
powerful Air Blast exchange mode for up to 500
cubic feet of fresh air per minute. It can also be
positioned into the cabin and swivelled 360° to
direct a cooling breeze right where you want it.
Fits onto most hatches 19'' across and larger.
The Sirocco fan features a unique gimballed
design that allows airflow to be directed in any
direction of the cabin – 360°. It can also be
folded flat and out of the way against the
bulkhead when not in use.
With its multiple speeds, timer settings and
quiet operation there is no other marine fan that
can match the Sirocco’s performance.
The Ultimate direct wire fan features a patented
FingerSafe™ blade that does not require a
protective grill and has a shock-absorbing leading
edge that flexes when it is stopped. The resulting
maximum airflow makes the Ultimate the top
choice for sailors heading to hot, humid climates.
The 2 speed motor creates minimal electronic
interference and can be safely mounted on the
bridge or at the nav station.
Features & Benefits
• 3 quiet comfort speeds & 1 turbo setting
• 8'' Blade
• Quiet - sealed brushless motor
• Secure suction mount (no drilling required)
• Exchange stale cabin air in minutes
• Reliable long-life & battery friendly
• Economical alternative to air conditioning
• CFM*: 100 - 500
• Hatch not included - see our Lewmar section
Amp Draw
High Medium Low Turbo
12V DC 0.95A
0.5A
0.2A 4.3A
Dimensions:
Depth: 8cm (3.5")
Width: 32cm (12.5")
Length: 35cm (14")
108
Voltage Part No.
12V 6-11704
Features & Benefits
• 3 speed push button control
• Finger safe blades fitted
• Ultra quiet long-life motor
• Four preset timer settings (2, 4, 6 or 8 hours)
• Timer indicator lights and automatic dimming
• Allows full 360° rotation for limitless positioning
• CFM*: 136 - 200
High
12V DC 0.34A
24V DC 0.17A
Amp Draw
Medium Low
0.25A 0.14A
0.11A
0.06A
Dimensions:
Depth: 8.9cm (3.5")
Width: 25cm (9.5")
Height: 31.5cm (12")
Voltage
12V
24V
Part No.
6-11705
6-11707
Features & Benefits
• 2 speeds to allow maximum airflow
• Long life with low power drawing motor
• Adjustable tilting head
• Easy to clean
• Quiet, dependable operation
• Fan stays in place in rough seas
• Finger safe blades fitted
• CFM*: 150 - 200
12V DC
Amp Draw
High
Low
0.41A 0.28A
Dimensions:
Depth:
16cm (6.5")
OA Width*: 17.5cm (7")
OA Height*: 21cm (10")
* including blade
Voltage
12V
Part No.
6-11734
*CFM = cubic feet per minute; the measure of air
volume moved by the fan.
Whale Electric Freshwater
Galley Pumps
PUMPS
PUMP ACCUMULATOR KIT – INTEGRATED
Smooth constant flow - prevents water hammering and cycling.
One piece kit includes pump and 2 or 8L compact accumulator tank.
Easy maintenance inlet strainer
with clear lid for inspection prevents
debris from entering the pump
This integrated kit is a drop into line pre-assembled kit designed to
provide a constant reliable flow of water on board. Save time and
money fast installation.
Features and Benefits
• Combined pump and accumulator tank ensures a
smooth even flow of water to all outlets
• Compact design installs easily in convenient locations
• Reduced noise and vibration by preventing
pump cycling
Easy installation
• Easily plumbed into standard 1⁄2 " or 3⁄8 " pipework
pre-mounted kit 4 screws
(W-UF2215 has 15mm Quick Connect fittings)
and connect plumbing
• Connects directly to Whale Quick Connect 15mm
plumbing system
• Can be fitted to new or existing systems
• Includes long life Whale pressure pump
Moulded base
drop in and fit
one piece kit
Accreditations:
• EMC compliant
• CE marked
Connects directly to 15mm Quick Connect
pipework. 8ltr version suitable to connect to
1
⁄2 " flexible hose or 3⁄8 " flexible hose with
Whale adaptors (see specifications).
W-UF2215
Specifications:
Part No.
W-UF2215
W-UF2015
W-UF8025
Model:
Accumulator Kit
(includes W-UF1214)
Accumulator Kit
(includes W-UF1215)
Accumulator Kit
(includes W-UF1825)
Accumulator Tank Size:
2 ltrs (0.53 US gals)
Voltage:
12V DC
12V DC
24V DC
Recommended Fuse Size:
10 Amp
8 Amp
8 Amp
Cut Out Pressure:
3 bar (45 psi)
3 bar (45 psi)
3 bar (45 psi)
Weight:
3.9kg (8.9 lbs)
5.4kg (11.9 lbs)
5.9kg (13 lbs)
Factory Pre-charge Pressure
+/0.014 bar+/-2psi:
2.2 bar (32 psi)
2.2 bar (32 psi)
2.2 bar (32 psi)
Inlet/Outlet Connections:
Materials:
Quick Connect Whale®
15mm connections
Whale Quick Connect 15mm Female
For 1⁄2 " Flexible Hose, Use W-WX1584 (supplied with kit)
For 3⁄8 " Flexible Hose, Use W-WU1215 and W-WU1280 (not supplied with kit)
Pump Body: Glass-filled Polypropylene Aluminium and Powder-coated Steel Diaphragms,
Valves and Feet: Monoprene®, Seals: Nitrile®, Tank: Butyl, Base: ABS, Fittings: Brass, Fasteners: Stainless Steel
Materials in contact with fluid:
Minimum Wire Size:
Glass-filled Polypropylene, Monprene®, Nitrile®, Stainless Steel, Brass
2.5 mm2 (13 AWG)
2.5 mm2 (13 AWG)
2.5 mm2 (13 AWG)
Maximum Suction Lift:
30m (99ft)
20m (66ft)
30m (99ft)
Maximum Discharge Head:
3m (10 ft)
3m (10 ft)
3m (10 ft)
W-UF2215
See the Whale section of our catalogue
for more pump products
W-UF2015 & W-UF8025
109
Circulation & Aquajet Pumps
PUMPS & ACCESSORIES
Pump Body:
PPA
Impeller:
PPA
Shaft:
Stainless Steel
Liquid:
Water/glycol mixture; max 60% glycol, fresh water
Liquid temp.:
Min -40°C, Max +100°C
System Pressure:
2.5 Bar max
Port Size:
Ø 16mm (5⁄8 '') hose
Dry Running:
Max 30 mins
Input Power:
Max 27W
Mounting:
Separate universal bracket for flat services
Motor:
12/24V DC enclosed (as per IP67) permanent
magnet, ball bearing mounted motor, designed for
continuous operation
Dimensions (LxWxH): 177 x 68 x 85mm (6.97'' x 2.68'' x 3.35'')
Weight:
0.6kg (1.3lbs) with bracket
CM30P7-1 HEAVY DUTY MAGNETIC
DRIVEN CENTRIFUGAL PUMP
CM Series Circulation Pumps are a line of
compact centrifugal pumps which combine
high flow rates with very low electric
current consumption, making
them ideally suited for circulating
fresh water in live fish tanks,
heating and cooling systems.
But not saltwater.
Model
Volts
Hose Connection
CM30P7-1
CM30P7-1
12V
24V
Ø 16mm (5/8'')
Ø 16mm (5/8'')
Back Pressure
Bar
kPA
ft
Flow
l/min USGPM
0.1
0.15
20.0
17.5
10
15
3.3
6.6
5.3
4.2
Part No.
10-24503-03
10-24503-04
CM30P7-1 with 20mm Ø Port
and CM90 also available see
Section 10 catalogue or visit:
www.aquafax.co.uk
CM90BL HEAVY DUTY MAGNETIC DRIVEN CENTRIFUGAL PUMP
Magnetic driven centrifugal pump, fitted with a brushless
electric motor with fewer wear parts for continuous
operation with extra long service life. Suitable for
circulation of glycol mixture or fresh water.
Model
CM90P7-1 BL
CM90P7-1 BL
Volts
12
24
Part No.
10-24898-01
10-24898-02
Pump Body:
PPA
Impeller:
PA12
Shaft:
Stainless Steel
Liquid:
Water/glycol mixture; max 60% glycol, fresh water
Liquid temp.:
Min -40°C, Max +100°C
System Pressure:
2.5 Bar max
Port Size:
Ø 38mm (11 ⁄2 '') hose
Dry Running:
Max 30 mins
Input Power:
Max 125W
Mounting:
Separate universal bracket for flat services
Motor:
Brushless 12/24 V DC enclosed (as per IP67) permanent magnet,
ball bearing mounted motor, designed for continuous operation
Capacity 0.1 Bar:
115 l/min at 0.1 bar (30.4 GPM at 8.2ft)
Capacity 0.25 Bar:
90 l/min at 0.25 bar (23.8 GPM at 8.2ft)
Dimensions (LxWxH): 272 x 121 x 150mm (10.71'' x 4.76'' x 5.90'')
Weight:
3kg (6.6lbs) with bracket
AQUA JET WPS 3.5 PUMP WITH BYPASS
WPS 3.5 fitted with a built-in pulsation dampening
by-pass to control unwanted cycling and noise.
The five chamber Aqua Jet WPS Series provides a reliable heart for small
boat and recreational vehicle water pressure system. It’s lower initial price
is naturally attractive, but equally important, its readily serviceable design
assures low maintenance costs and years of faithful service.
It’s recommended to install an accumulator tank.
Also available:
Always use a PUMProtector inlet strainer before
Aquajet Pump Pressure Switch with
the pump intake.
Bypass (2.8b). Part No. 09-47277-01
See our catalogue Section 10 for
the full range or visit our website:
www.aquafax.co.uk.
110
Model
WPS 3.5
Capacity
13LPM (3.5GPM)
Model:
Length:
Width:
Height:
Weight:
Motor:
Body:
Valves:
Diaphragm:
Connection:
Cut-Off Pressure 12V Part No. Fuse Size
2.1bar/30psi
10-13395-07
10A
WPS 3.5
236.5mm
210mm
116mm
2kg
85W
PP/PPA
EPDM
Santoprene
3
⁄8" BSP/hose 1⁄2",
1
⁄2" BSP/hose 3⁄4"
24V Part No.
10-13395-08
Fuse Size
5A
CM30P7-1 & CM90BL CE marked to the following standards:
• EN55014: 1993/Radio disturbance • ISO8846: Small Craft - Electrical
devices -protection against ignition of surrounding flammable gases
• ISO10133: Small Craft - Electrical systems - extra low voltage DC
installations • 72/245/EEG, 95/54/EG Electromagnetic compatibility
Pumps, Blower & Tank
PUMPS & ACCESSORIES
JOHNSON PUMP HEAVY DUTY RADIAL BLOWER
• Designed for engine compartment ventilation prior to start-up
• Motor rated for continuous operation and can be used as air
intake or extraction to ventilate bilges, galleys,
accommodation and other compartments
• Flange mount or flex mount design
• Double ball bearing motor with corrosion
resistant stainless steel shafts and screws
• High-impact anti-shock ABS body for Air 3 blower
Air 3
• Nylon, glass-fiber reinforced body for Air 4 blower
Specification:
Capacity:
Voltage:
Mounting:
Dimensions (H x W x L):
Port Connections:
Air 3
280m3/hr 163cfm
12V Amps: 3.9A
24V Amps: 2.5A
Flange Mount
198 x 171 x 195mm
Inlet: Ø 75mm
Outlet: 92 x 80mm
Air 4
750m3/hr 441cfm
12V Amps: 4.5A
–
Flex Mount
297 x 257 x 182mm
Inlet: Ø 150mm
Outlet: Ø 110mm
NEW
Air 4
Description
Air 3'' 90º Bilge Blower 12V
Part No.
10-47416-01
10-47416-02
10-47421-01
JOHNSON PUMP VIKING COMPACT MANUALLY OPERATED BILGE PUMP
The Viking Compact is a bulkhead fitting, manually operated,
self-priming, diaphragm pump designed for bilge pump
applications on boats.
Complies with ISO 15083 Small craft - bilge pumping
systems. Can be used on boats
of design categories A, B, C and D.
Specification:
Plastic materials:
Elastomers:
Shafts:
Connections:
ABS, PA 66, PP
Nitrile rubber
Stainless Steel
25mm (1") or 38mm (11⁄2 ")
hose connections
Max. Liquid temp.: +60ºC (140ºF)
Storage temp.:
-40ºC to +60ºC (-40ºF to 140ºF),
without operation and in dry condition
Dimensions:
According to fig.1
Weight:
0.7kg (1.54lbs)
CAPACITY
Output capacity depends on installation
conditions and pumping rate.
Performance given at back pressure (head)
of 10kPa (1.45psi) rated for 45 strokes per
minute: Dia. 38mm (11⁄2 ") ports, 37.5 lit/min
(9.91 USGPM) (594 USGPH).
Maximum lift:
2.1m (7')
Maximum head:
1.2m (4' )
Maximum combined
lift and head:
3.3m (11')
Description
Viking Compact w. dia 25mm (1") and dia. 38mm (11⁄2 ") ports
Part No.
10-24800-01
JOHNSON PUMP GREY WATER TANK
• Designed for use as a waste water collection tank from showers, sinks,
dishwashing machines etc.
• Easy access cover for cleaning
• Available with Ultima Switch for automatic operation to any 12/24V
pump rated up to 20A
Shows tank
• Tank is prepared for Viking Power 16 waste pumps
with pump
10-13350-03/04 (not included)
• Hose Connections:
Inlet: 3 x 19mm, 3 x 25mm 3 x 38mm
Outlet: 1 x 19mm, 1 x 25mm
• Dimensions: 185 x 280 x 340mm
• Capacity: 10L
See Section 10 of our catalogue for more
SPX Flow / Johnson Pump products.
10-1206
Description
Multiple Port Grey Water Tank c/w Ultima 12/24V Switch
Multiple Port Grey Water Tank Only
Part No.
10-1206
10-1207
111
Morsø Solid Fuel Stove
& Accessories
NARROWBOAT STOVES
MORSØ SWIFT SOLID FUEL STOVE
The Swift has clean lines and a compact frame, built with the quality and style you can expect from
a world renowned stove manufacturer. A true cast iron stove, this radiant burner is both strong and
efficient with exceptional draft control and a single fire / ash pan door. Part No. N-90025
Rated Output (kW):
Log Length (cm):
Efficiency Net/Gross (%):
Flue Outlet:
4.5
28
76 / 69
Top or rear option
Dimensions:
Height inc. legs (mm):
Width (mm):
Depth (mm):
Leg Height (mm):
Flue Outlet Internal Diameter (mm):
546
388
438
100
125
Description
Twin Wall Flue Kit for Morsø - Straight
Twin Wall Flue Kit for Morsø - 12'' Offset
S/S Back Boiler for Morsø Stoves 8000 BTU
Flue Kit Includes:
• 2 x 1m lengths inner chimney flue pipe
• 1 x Deck Plate
• 1 x 550mm External Chimney
• 1 x External flue terminal
• 1 x Blanking cap
• 4 x Clamping rings
• 2 x Fire hearth securing brackets
• 1 x Length Self adhesive gasket
Part No.
N-90023
N-90024
N-90022
GEOCEL® FIRE BLOCK SEAL
High Temperature Resistant Sealant
A ready mixed and ready to use new
generation fire cement that will withstand
temperatures up to 1500°C. Suitable for
sealing joints on solid fuel stove flues.
Bulk Pack: 12 x 310ml cartridges:
Part No. 5-70020
Single: 310ml cartridge:
Part No. 5-70020/1
For More Solid Fuel
Stoves see our
Narrowboat
catalogue section...
INSTALLATION AND COMMISSIONING OF THE STOVE MUST BE
CARRIED OUT BY A COMPETENT PERSON. THE INSTALLER MUST
CONSIDER ALL ASPECTS OF SAFETY WHEN FITTING THE STOVE AND
FLUE PIPE SYSTEM AND INSTRUCT USERS HOW TO OPERATE AND
MAINTAIN THE STOVE SAFELY AFTER COMMISSIONING.
112

Catalogue Supplement

Transcription

Similar documents

kik-step®

Skate Deterrents

Product sheet BBPE050.4A

ZIMA 126-CS-Fabrication.indd

ISE Spec Sheet-Contractor 333 - InSinkErator

CW PDF

Hydro-Filter™ - Phoenix Truckmounts

Designed by Lowe`s and Frigidaire

GOLDEN TANDOORS

2005 Haulmark This Motorhome is amazing as the pictures will