citea nun`alvares

citea+nun’alvares
nun’alvares
+
4 - 6 - 8m
SMALL MODELS
P OLE
WITH
SINGLE MOUNTING
P OLE
WITH
DOUBLE MOUNTING
LARGE MODELS
4000-6000
4000-6000
P OLE WITH
1000 BRACKET
M OUNTING
P OLE WITH
1500 BRACKET
+ REAR BRACKET
BA SE
1500
1000
4000
6000-8000
BROAD RANGE OF CONFIGURATIONS,
SIZES AND SOURCES
6000-8000
200
260
The Nun’Alvares ensemble was specifically developed for the
Citea luminaires. The Citea range is available in three sizes
(Mini, Midi, Maxi). Any combination of sizes can be envisaged
depending on the power desired. This ensemble is available
in multiple configurations and in several heights. This large
selection enables the urban designer to utilise the Nun’Alvares
range for different lighting applications.
The large models – with rear bracket – are suitable both
for lighting larges avenues and sidewalks. There is also the
M OUNTING
BA SE
flexibility offered by the large model, which is available with two
bracket sizes. This allows the light to be projected for varying
300
double brackets – can be installed along streets and squares in
400
distances onto the road. The small models – with single or
city centres. This aesthetic coherence between the suburbs and
the city centre is one of the main strengths of the Nun’Alvares
range. The lighting column is composed of a rectangular profile
with a longitudinal opening at the top of the pole.
Other mounting
configurations on request
Depending on the configuration, the lighting column is provided
with a bracket displaying the same aesthetic characteristics.
The Citea luminaire may also be mounted on a catenary for
axial suspension.
Colour: equivalent to AKZO 900 sanded grey
Other colours on request
Other lighting column heights are available
citea+nun’alvares
citea
LAMPS – REFLECTORS
Optical compartment tightness level:
IP 66 Sealsafe® (*)
Control gear tightness level:
IP 44 (Mini: IP 54) (*)
Impact resistance: - flat glass:
IK 08 (**)
IK 10 (**)
- curved acrylic:
IK 06 (**)
Aerodynamic resistance (CxS):
- Mini:
0,062 m2
- Midi:
0,080 m2
- Maxi:
0,095 m2
Nominal voltage:
(*)
Midi
1627
1954 1552 (*)
High-pressure
sodium
150 W
250 W 250 W
400 W 250 W 250 W
Metal halide
150 W
250 W 250 W
400 W 250 W 250 W
Metal halide with
ceramic arc tube
150 W
250 W 250 W
-
250 W 250 W
Cosmopolis
140 W
140 W
-
140 W 140 W
I or II (option)
- Mini:
7,5 kg
- Midi:
10 kg
- Maxi:
15 kg
Maxi
1289
-
1552
LIGHT DISTRIBUTION
Reflector 1627 (Mini)
Reflector 1954 (Midi)
500 417 333 250 167
90°/270°
230 V – 50 Hz
Electrical class:
Weight (empty):
Mini
Reflectors
Maximum power ratings
(*)
Control gear not built in for the 250 W version
CHARACTERISTICS – LUMINAIRES
- curved polycarbonate:
Models
(*)
15°/165°
90°
90°
180°
according to IEC - EN 60598
according to IEC - EN 62262
0°
180°
0°
270°
270°
(**)
Reflector 1289 (Maxi)
Reflector 1552 (Maxi)
THREE SIZES, MULTIPLE
PHOTOMETRIC SOLUTIONS
90°/270°
Made completely of aluminium and glass, the Citea luminaire
20°/160°
90°
90°
90
is available in three sizes (Mini, Midi and Maxi). This extended
range allows multiple combinations of luminaires on the
Nun’Alvares lighting column. It is also a guarantee for diversity
180°
0°
180°
with regard to light sources and light distribution. Any type of
0°
lamp commonly used in urban settings can be incorporated,
270°
270
270°
for power ratings varying between 70 and 400 W. Depending on
the size, the Citea luminaire is available with a selection of four
H
reflectors. The timeless design of the Citea fits in perfectly in
any urban environment, whether traditional or contemporary.
As an option, a system of louvres makes it possible to control
Ø
the forward or backward light flux.
Citea
Colour: AKZO grey 900 sanded
Other colours on request
Mini
Midi
Maxi
Ø
490 mm
590 mm
675 mm
H
167 mm
190 mm
230 mm
1954
THREE SIZES
The Citea luminaire is available in three sizes: Mini, Midi and Maxi. It is
comprised of a crown and a transition plate made of cast aluminium under a
dome in spun aluminium. The optical unit – which is supported by the transition
plate – is made up of a reflector constructed of deep drawn, polished and
anodised aluminium (or metallised synthetic material) and a protector made
of flat glass. A protector made of polycarbonate or slightly rounded acrylic
is optional.
INSTALLATION UP TO 12 METRES
The remarkable efficacy and photometric diversity of the Citea range allows
installation at heights between 4 and 12 metres.
INTEGRAL FLOODLIGHT
As an option, to illuminate foliage, the dome of the Citea Midi luminaire can house a
floodlight for 35 or 70 W metal halide lamps with ceramic arc tubes.
A choice can be made between a symmetrical or asymmetrical (60°) reflector
that can rotate through 360° in increments of 45°. The protector is made of clear
(asymmetric photometry) or prismatic (symmetric photometry) glass.
MAINTENANCE
The luminaire is opened, without tools, by loosening one 1/4-turn screw (two for
the Maxi version) and tilting the transition plate supporting the Sealsafe® (IP 66)
optical unit sideways on a hinge.
This operation gives access to the control gear plate and the lamp support plug.
Mini
Midi
Maxi
citea
SIDE ENTRY MOUNTING
D IRECT
S IDE
SIDE ENTRY MOUNTING
- female,
female on a plain spigot [D60F]
ENTRY MOUNTING WITH KNUCKLE - JOINT
- female, on a 1” BSP threaded tube [R/G34F]
4
min 110
50
Ø 60
2 x M10
- square
q
[C40x40:
[C
[ 4 4 Mi
Minii - Midi]]
- square [R/C
/C 60x50]
40
15
40
49 (Maxi)
60
15
50
[C40x49: Maxi]
Ø8
Ø7
- male, on a female spigot [D60M]
90 mm
150
Ø 49
- male, on a 1” female threaded tube [R/G34M]
2 x Ø8
22 90
150
Ø 60
- male, on a female spigot [R/D60M]
P OST - TOP
MOUNTING
- single [S-D60F]
(M INI - M IDI )
- double [D
[D-D60F]
D60F]
2 x Ø8
22 90
150
85
85
Ø 49
Ø 60
2 x M5 (Ø60)
2 x M5 (Ø60)
2 x M8
Ø60 > 120
Note: for mounting on a wooden pole,
a mounting plate is required
140
110
- direct walll or pole mounting
BROAD RANGE OF CONFIGURATIONS, SIZES AND SOURCES
CITEA + FILIA
Carpentras
France
citea
CITEA + AUBIS
Fiuggi
Italy
CITEA + CORNALINE
Palerme
Italy
CITEA
Montijo
Portugal
CITEA + AUBIS
Toulon
France
citea
CITEA + FILIA
Monceau
France
CITEA
St-Denis
France
CITEA
Cape Town
South Africa
CITEA + VECTOR
Monceau
France
citea
www.schreder.com
Copyright© Schréder S.A. 2008 – The information, descriptions and illustrations herein are of only an indicative nature. Due to advanced developments, we may be required to alter the characteristics
of our products without notice. As these may present different characteristics according to the requirements of individual countries, we invite you to consult us.
the urban light
44352-Citea-br-2008-04-AN