Product Catalogue

Transcription

Product Catalogue
AN ISO 9001:2000 & TS 16949 CO.
Contents
Particulars
INTRODUCTION
WRAPPED INDUSTRIAL V-BELTS
CLASSICAL SECTION
Z/10x6
A/13x8
B/17x11
C/22x14
D/32x19
20/20x12.5
25/25x16
E/38x23
WEDGE SECTION
SPZ/10x8
SPA/13x10
SPB/17x14
SPC/22x18
HIGH CAPACITY NARROW V-BELTS
3V/9.7x8
5V/16x14
8V/25x23
CUT EDGE INDUSTRIAL V-BELTS
CLASSICAL SECTION
ZX/10x6
AX/13x8
BX/17x11
CX/22x14
WEDGE SECTION
XPZ/10x8
XPA/13x10
XPB/17x14
XPC/22x18
HIGH CAPACITY NARROW V-BELTS
3VX/9.7x8
5VX/16x14
RIBBED/POLY INDUSTRIAL V-BELTS
H/PH
J/PJ
K/PK
L/PL
M/PM
VARI SPEED V-BELTS
BANDED BELTS
HA/13x10
HB/17x13
HC/22x16
HD/32x21.5
HSPB/17x16
HSPC/22x20
H3V/9.7x10
H5V/15.8x16
Page No.
1
2
3
4-5
6
7
8
8
9
10
11
12
12
13
13
13
14
15
16
17
18
19
20
20
21
21
22
22
23
24
24
25
26
26
27
27
28
28
29
29
Contents
Particulars
Page No.
H8V/25.4x25
29
HEXAGONAL V-BELTS
AA/13x10
30
BB/17x14
30
CC/22x17
30
LAWN MOWER BELTS
3L/10x6
31
4L/13x8
32
5L/17x10
33
PIX COMBINE HARVESTER BELTS
BELTS TO FIT AS CLAAS
34-36
BELTS TO FIT AS BIZON
36
BELTS TO FIT AS DEUTZ FAHR
37-38
BELTS TO FIT AS DRONNINGBORG
39
BELTS TO FIT AS FORTSCHRITT
39
BELTS TO FIT AS JOHN DEERE
40
BELTS TO FIT AS LAVERDA
41
BELTS TO FIT AS NEW HOLLAND CLAYSON
42-44
BELTS TO FIT AS CASE/INTERNATIONAL HARVESTER
44
GRASS MACHINERY BELTS
44
BELTS TO FIT AS MASSEY FERGUSON
45
POWER DRIVE
TAPER BORE “SPZ” SECTION PULLEYS
46
TAPER BORE “SPA” SECTION PULLEYS
47
TAPER BORE “SPB” SECTION PULLEYS
48
TAPER BORE “SPC” SECTION PULLEYS
49
49
TAPER BUSHES WITH SCREWS
50
POWER DRIVE COUPLINGS
51
TYRE FLEX COUPLINGS & TYRES
51
JAW COUPLINGS & INSERTS
52
BRITISH STANDARD B.S. ROLLER CHAIN
53
AMERICAN STANDARD A.S.A. ROLLER CHAIN
54
SIMPLEX TAPER BUSH SPROCKETS
54
DUPLEX TAPER BUSH SPROCKETS
55
TRIPLEX TAPER BUSH SPROCKETS
55
SIMPLEX PILOT BORE SPROCKETS
55
CAST IRON : SIMPLEX PILOT BORE SPROCKETS
55
DUPLEX PILOT BORE SPROCKETS
55
CAST IRON : DUPLEX PILOT BORE SPROCKETS
55
TRIPLEX PILOT BORE SPROCKETS
55
CAST IRON : TRIPLEX PILOT BORE SPROCKETS
56
PLATE WHEELS
57
SPECIAL APPLICATION BELTS
58
STANDARD DESIGNATION FOR POLY/RIBBED V-BELTS
58
STANDARD DESIGNATION FOR BANDED BELTS
STANDARD DESIGNATION FOR CUT EDGE VARI SPEED BELTS 59
59
MINIMUM ORDER QUANTITIES
60
SERVICE EQUIPMENT
61
NOTES
CONDITIONS OF SALE
INTRODUCTION
FRAS BELTS :
Certain working environments such as coal mines & sensitive 4. Place Tension Tester at the centre of the span of the belt.
Apply force with the help of Tension Tester perpendicular
petrochemical installations require V-belts having Fire
to the span till the lower surface of the ring touches the
Resistant properties in addition to normal Anti-static
string.
properties.
5. Read the deflection force value (N) on the Newton Scale
by taking reading at the lower side of the upper ring.
FRAS (Fire Resistant Antistatic Belts) belts are suitable for
6. Compare the deflection force value (N) with the values
such environments. This construction is thoroughly tested
given in the table ‘A’. The deflection force value (N) should
during and after manufacture to comply with all aspects of
lie between the minimum and maximum values given in
IS-2494 Part II and BS-3790. ‘PIX’ FRAS belts conforms to :
the table ‘A’.
II 2GD c IIB X (Test report no. IB-03-4-934)
7. Deflection force less than minimum recommended value in
the range indicates an under-tensioned drive and
HEAT RESISTANT BELTS
deflection force higher than maximum recommended value
Continuous contact with oil & grease have harmful effects on
indicates an over-tensioned drive.
the belt life. The Heat Resistant properties of regular
construction belts allow drive operations in ambient
POLY/RIBBED V-BELTS
temperature up to 700C. Ambient temperature above 700C
Installation procedure :
may lead to premature ageing of belts. For both these
1. Switch off the main supply before beginning with the
conditions PIX AOH belts are to be used. Its special Oil
exercise of installation.
Resistant cover protects the belt from contamination.
2. Bring the pulleys closer to each other so that the belt can
Also these belts have been developed to work in ambient
be removed easily.
temperature up to 1000C. PIX AOH belts are also Anti-static.
3. Inspect the pulley grooves for any scores, sharp edges,
dirt and rust. Clean them as required.
FREE SET CONCEPT
4. Ensure the alignment of pulleys. Make sure that the shafts
Few good reasons for using it
are also properly aligned.
• No length code
5.
Mount the ribbed belt with no tension. Make sure that the
• Low variation in length tolerance
ribs have been properly seated in the grooves.
• Less Centre adjustment
6. Tension the ribbed belts as per the procedure
• Low stretch
recommended.
• Low variation in elongation within a set of belts
7. Give some running time to the drive so that the belts are
• Power transmitted more evenly
properly seated in the grooves.
• Longer life
8. Guard the drive properly.
• Longer maintenance intervals
• Less inventory
Tensioning procedure :
1. Fit the belt on the pulleys with no tension
WRAPPED & COGGED CONSTRUCTION V-BELTS
2. Draw two perpendicular lines across the belt at about 80%
Installation and maintenance
of the belt span between the pulleys as shown in the
• The drive should always be inspected periodically.
figure. Say for example the lines are placed 1000 mm
• Prior to installation, inspect sheave for dirt, rust, cracks
apart. ( A ).
burrs etc.
• The belts should never be forced on the pulleys.
• Maintain proper belt tension to avoid slippage. Always use
A
‘PIX Tension Tester’ for tensioning/re-tensioning.
• Change your belts - If cracks are observed at the side wall or at the bottom.
- If the cord is protruding out from the belt.
3. Increase the distance between two lines by 0.5 to 0.75%
i.e. by 5 mm to 7.5 mm for an initial spacing of 1000 mm,
so that the (A) now becomes 1007.5 mm.
A
RIGHT
WRONG
Ensure perfect alignment of
pulleys
WRONG
Do not pry or roll V-belts
into the pulley grooves
4. Run the drive under load for about 10 minutes.
Tension measurement procedure :
1. Measure the span length of the belt in mm. (Ref. Sketch)
5. Check the tension of the belt (spacing between two lines)
2. Tie a string/thread on the two pulleys
and readjust, if necessary.
along the length of belts and mark
centre of the span on the belt.
Installation and take up allowance
E for take up
3. Calculate 1.5% of the span (say ‘x’)
L
PJ
PK
PL
PM
Calculated E
for belt length less than 1000 mm
(mm)
M
T
M
T
M
T M
T
E for fitting
and 1% of the span for belt length
<750
-10 +10 -11 +13
750-1200 -10 +15 -12 +16 -15 +20
more than 1000 mm. Adjust lower
Belt deflection measurement
1200-2000 -15 +20 -16 +22 -20 +20
ring on the tension tester on
2000-3500 -20 +30 -23 +32 -30 +35 -40 +50
mm scale to coincide, ‘x’ mm with the
-40 +50 -50 +70
3500-6000
M
-100 +130
>6000
T
lower side of the ring. Adjust lower side of the upper ring at
0.00 N.
SPAN
FORCE
DEFLECTION
1
CLASSICAL SECTION : Z
Wrapped V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Belt
Reference
Z 14
Z 15
Z 15.5
Z 16
Z 16.5
Z 17
Z 17.5
Z 18
Z 18.5
Z 19
Z 19.5
Z 20
Z 20.5
Z 21
Z 21.5
Z 22
Z 22.5
Z 23
Z 23.5
Z 24
Z 24.5
Z 25
Z 25.5
Z 26
Z 26.5
Z 27
Z 27.5
Z 28
Z 28.5
Z 29
Z 29.5
Z 30
Z 30.5
Z 31
Z 31.5
Z 32
Z 32.5
Z 33
Z 33.5
Z 34
Z 34.5
Z 35
Z 35.5
Z 36
Z 36.5
Z 37
Z 37.5
Z 38
Z 38.5
Z 39
Z 39.5
Z 40
Z 40.5
Z 41
Z 41.5
Z 42
Z 42.5
Z 43
Z 43.5
Z 44
Z 44.5
Z 45
Z 45.5
Z 46
Z 46.5
Z 47
Z 47.5
Z 48
Inside
Length
(mm)
360
381
395
410
420
435
450
457
470
480
500
510
520
535
545
560
575
585
600
610
620
635
650
660
675
686
700
710
725
735
750
760
775
790
800
815
825
840
850
865
875
890
900
914
925
940
950
965
975
990
1000
1016
1030
1041
1050
1065
1080
1090
1105
1120
1130
1143
1155
1168
1180
1190
1200
1220
Datum/Pitch
Length
(mm)
378
403
416
428
443
454
467
479
494
505
517
530
543
555
568
581
594
606
619
632
644
657
670
682
695
708
721
733
746
759
771
784
797
809
822
835
848
860
873
886
898
911
924
936
949
962
975
987
1000
1013
1025
1038
1051
1063
1076
1089
1102
1114
1127
1140
1152
1165
1178
1190
1203
1216
1229
1241
Lp to La
16
6 mm
Features :
• Oil resistant • Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt Length Factor (mm)
10 mm
Section
Z
Z Section
Li to Lp
22
Li to La
38
Manufacturing Range
254 - 4953 mm
Weight per metre (Kgs)
0.057
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40
10
6
50 dp (mm)
Nominal Length (Inches) : Li
‘PIX’ FRAS belts conforms to :
Minimum Order Qty.
(No. of V-Belts)
50
II 2GD c IIB X (Test report no. IB-03-4-934)
Z / 10x6
Belt
Reference
Z 48.5
Z 49
Z 49.5
Z 50
Z 50.5
Z 51
Z 51.5
Z 52
Z 52.5
Z 53
Z 53.5
Z 54
Z 55
Z 56
Z 57
Z 58
Z 59
Z 60
Z 61
Z 62
Z 63
Z 64
Z 65
Z 66
Z 67
Z 68
Z 69
Z 70
Z 71
Z 72
Z 73
Z 74
Z 75
Z 76
Z 77
Z 78
Z 79
Z 80
Z 81
Z 82
Z 82.5
Z 83
Z 83.5
Z 84
Z 84.5
Z 85
Z 86
Z 86.5
Z 87
Z 88
Z 89
Z 90
Z 91
Z 92
Z 93
Z 94
Z 95
Z 96
Z 97
Z 98
Z 99
Z 100
Z 101
Z 102
Z 103
Z 104
Z 105
Z 106
Inside
Length
(mm)
1230
1250
1260
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1830
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2095
2100
2120
2134
2150
2160
2184
2200
2210
2240
2260
2286
2311
2337
2360
2388
2413
2438
2464
2500
2520
2540
2565
2591
2615
2650
2667
2700
Datum/Pitch
Length
(mm)
1254
1267
1279
1292
1305
1317
1330
1343
1356
1368
1381
1394
1419
1444
1470
1495
1521
1546
1571
1597
1622
1648
1673
1698
1724
1749
1775
1800
1825
1851
1876
1902
1927
1952
1978
2003
2029
2054
2079
2105
2118
2130
2143
2156
2168
2181
2206
2219
2232
2257
2283
2308
2333
2359
2384
2410
2435
2460
2486
2511
2537
2562
2587
2613
2638
2664
2689
2714
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
2
Belt
Reference
Z 107
Z 108
Z 109
Z 110
Z 112
Z 113
Z 114
Z 115
Z 116
Z 117
Z 118
Z 119
Z 120
Z 122
Z 124
Z 126
Z 128
Z 130
Z 132
Z 134
Z 136
Z 138
Z 140
Z 142
Z 143
Z 144
Z 146
Z 148
Z 150
Z 152
Z 154
Z 156
Z 158
Z 161
Z 162
Z 163
Z 165
Z 167
Z 172
Z 173
Z 174
Z 175
Z 176
Z 177
Z 180
Z 181
Z 187
Z 195
Z 196
Z 197
Z 198
Z 199
Z 200
Z 208
Z 210
Z 220
Z 225
Z 236
Z 240
Z 242
Z 248
Z 264
Z 276
Z 280
Z 295
Z 315
Inside
Length
(mm)
2725
2750
2775
2800
2845
2870
2900
2920
2950
2965
3000
3025
3050
3100
3150
3200
3250
3302
3350
3400
3450
3500
3550
3600
3630
3658
3700
3750
3810
3860
3910
3960
4000
4100
4115
4140
4200
4250
4370
4394
4420
4450
4470
4500
4572
4600
4750
4950
4980
5000
5030
5050
5080
5300
5330
5600
5715
6000
6100
6150
6300
6700
7000
7100
7500
8000
Datum/Pitch
Length
(mm)
2740
2765
2791
2816
2867
2892
2918
2943
2968
2994
3019
3045
3070
3121
3172
3222
3273
3324
3375
3426
3476
3527
3578
3629
3654
3680
3730
3781
3832
3883
3934
3984
4035
4111
4137
4162
4213
4264
4391
4416
4442
4467
4492
4518
4594
4619
4772
4975
5000
5026
5051
5077
5102
5305
5356
5610
5737
6016
6118
6169
6321
6728
7032
7134
7515
8023
CLASSICAL SECTION : A
Wrapped V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Features :
• Oil resistant • Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt
Reference
A 15
A 16
A 16.5
A 17
A 17.5
A 18
A 18.5
A 19
A 19.5
A 20
A 20.5
A 21
A 21.5
A 22
A 22.5
A 23
A 23.5
A 24
A 24.5
A 25
A 25.5
A 26
A 26.5
A 27
A 27.5
A 28
A 28.5
A 29
A 29.5
A 30
A 30.5
A 31
A 31.5
A 32
A 32.5
A 33
A 33.5
A 34
A 34.5
A 35
A 35.5
A 36
A 36.5
A 37
A 37.5
A 38
A 38.5
A 39
A 39.5
A 40
A 40.5
A 41
A 41.5
A 42
A 42.5
A 43
A 43.5
A 44
A 44.5
A 45
A 45.5
A 46
A 46.5
A 47
A 47.5
A 48
A 48.5
A 49
Inside
Length
(mm)
381
410
420
435
450
457
470
480
500
510
520
535
545
560
575
585
600
610
620
635
650
660
675
686
700
710
725
735
750
760
775
790
800
815
825
840
850
865
875
890
900
914
925
940
950
965
975
990
1000
1016
1030
1041
1050
1065
1080
1090
1105
1120
1130
1143
1155
1168
1180
1190
1200
1220
1230
1250
Datum/Pitch
Length
(mm)
417
442
455
468
481
493
506
519
531
544
557
569
582
595
608
620
633
646
658
671
684
696
709
722
735
747
760
773
785
798
811
823
836
849
862
874
887
900
912
925
938
950
963
976
989
1001
1014
1027
1039
1052
1065
1077
1090
1103
1116
1128
1141
1154
1166
1179
1192
1204
1217
1230
1243
1255
1268
1281
Belt Length Factor (mm)
13 mm
Lp to La
14
8 mm
Section
A Section
A
Li to Lp
36
Li to La
50
Manufacturing Range
330 - 9652 mm
Weight per metre (Kgs)
0.106
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40
13
8
75 dp (mm)
Nominal Length (inches) : Li
‘PIX’ FRAS belts conforms to :
Minimum Order Qty.
(No. of V-Belts)
40
II 2GD c IIB X (Test report no. IB-03-4-934)
A / 13x8
Belt
Reference
A 49.5
A 50
A 50.5
A 51
A 51.5
A 52
A 52.5
A 53
A 53.5
A 54
A 55
A 56
A 57
A 58
A 59
A 60
A 61
A 62
A 63
A 64
A 65
A 66
A 67
A 68
A 69
A 70
A 71
A 72
A 73
A 74
A 75
A 76
A 77
A 78
A 79
A 80
A 81
A 82
A 82.5
A 83
A 83.5
A 84
A 84.5
A 85
A 85.5
A 86
A 86.5
A 87
A 88
A 89
A 90
A 91
A 92
A 93
A 94
A 95
A 96
A 97
A 98
A 99
A 100
A 101
A 102
A 103
A 104
A 105
A 106
A 107
Inside
Length
(mm)
1260
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1830
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2095
2100
2120
2134
2150
2160
2170
2184
2200
2210
2240
2260
2286
2311
2337
2360
2388
2413
2438
2464
2500
2520
2540
2565
2591
2615
2650
2667
2700
2725
Datum/Pitch
Length
(mm)
1293
1306
1319
1331
1344
1357
1370
1382
1395
1408
1433
1458
1484
1509
1535
1560
1585
1611
1636
1662
1687
1712
1738
1763
1789
1814
1839
1865
1890
1916
1941
1966
1992
2017
2043
2068
2093
2119
2132
2144
2157
2170
2182
2195
2208
2220
2233
2246
2271
2297
2322
2347
2373
2398
2424
2449
2474
2500
2525
2551
2576
2601
2627
2652
2678
2703
2728
2754
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
3
Belt
Reference
A 108
A 109
A 110
A 111
A 112
A 113
A 114
A 115
A 116
A 117
A 118
A 119
A 120
A 122
A 124
A 126
A 128
A 130
A 132
A 134
A 136
A 138
A 140
A 142
A 143
A 144
A 145
A 146
A 148
A 150
A 152
A 154
A 156
A 158
A 160
A 161
A 162
A 163
A 165
A 167
A 172
A 173
A 174
A 175
A 176
A 177
A 180
A 181
A 187
A 195
A 196
A 197
A 198
A 199
A 200
A 208
A 210
A 220
A 225
A 236
A 240
A 242
A 248
A 264
A 276
A 280
A 295
A 315
Inside
Length
(mm)
2750
2775
2800
2819
2845
2870
2900
2920
2950
2965
3000
3025
3050
3100
3150
3200
3250
3302
3350
3400
3450
3500
3550
3600
3630
3658
3683
3700
3750
3810
3860
3910
3960
4000
4064
4100
4115
4140
4200
4250
4370
4394
4420
4450
4470
4500
4572
4600
4750
4950
4980
5000
5030
5050
5080
5300
5330
5600
5715
6000
6100
6150
6300
6700
7000
7100
7500
8000
Datum/Pitch
Length
(mm)
2779
2805
2830
2855
2881
2906
2932
2957
2982
3008
3033
3059
3084
3135
3186
3236
3287
3338
3389
3440
3490
3541
3592
3643
3668
3694
3719
3744
3795
3846
3897
3948
3998
4049
4100
4125
4151
4176
4227
4278
4405
4430
4456
4481
4506
4532
4608
4633
4786
4989
5014
5040
5065
5091
5116
5319
5370
5624
5751
6030
6132
6183
6335
6742
7046
7148
7529
8037
CLASSICAL SECTION : B
Wrapped V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Belt
Reference
B 16
B 16.5
B 17
B 17.5
B 18
B 18.5
B 19
B 19.5
B 20
B 20.5
B 21
B 21.5
B 22
B 22.5
B 23
B 23.5
B 24
B 24.5
B 25
B 25.5
B 26
B 26.5
B 27
B 27.5
B 28
B 28.5
B 29
B 29.5
B 30
B 30.5
B 31
B 31.5
B 32
B 32.5
B 33
B 33.5
B 34
B 34.5
B 35
B 35.5
B 36
B 36.5
B 37
B 37.5
B 38
B 38.5
B 39
B 39.5
B 40
B 40.5
B 41
B 41.5
B 42
B 42.5
B 43
B 43.5
B 44
Inside
Length
(mm)
410
420
435
450
457
470
480
500
510
520
535
545
560
575
585
600
610
620
635
650
660
675
686
700
710
725
735
750
760
775
790
800
815
825
840
850
865
875
890
900
914
925
940
950
965
975
990
1000
1016
1030
1041
1050
1065
1080
1090
1105
1120
Datum/Pitch
Length
(mm)
449
464
475
488
500
515
526
538
551
564
576
589
602
615
627
640
653
665
678
691
703
716
729
742
754
767
780
792
805
818
830
843
856
869
881
894
907
919
932
945
957
970
983
996
1008
1021
1034
1046
1059
1072
1084
1097
1110
1123
1135
1148
1161
11 mm
Features :
• Oil resistant • Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt Length Factor (mm)
17 mm
Lp to La
26
Section
B
B Section
Li to Lp
43
Li to La
69
Manufacturing Range
406 - 16713 mm
Weight per metre (Kgs)
0.182
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
40 125 dp (mm)
17
11
Nominal Length (inches) : Li
‘PIX’ FRAS belts conforms to :
Minimum Order Qty.
(No. of V-Belts)
30
II 2GD c IIB X (Test report no. IB-03-4-934)
B / 17x11
Belt
Reference
B 44.5
B 45
B 45.5
B 46
B 46.5
B 47
B 47.5
B 48
B 48.5
B 49
B 49.5
B 50
B 50.5
B 51
B 51.5
B 52
B 52.5
B 53
B 53.5
B 54
B 55
B 56
B 57
B 58
B 59
B 60
B 61
B 62
B 63
B 64
B 65
B 66
B 67
B 68
B 69
B 70
B 71
B 72
B 73
B 74
B 75
B 76
B 77
B 78
B 79
B 80
B 81
B 82
B 82.5
B 83
B 83.5
B 84
B 84.5
B 85
B 86
B 86.5
B 87
Inside
Length
(mm)
1130
1143
1155
1168
1180
1190
1200
1220
1230
1250
1260
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1830
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2095
2100
2120
2134
2150
2160
2184
2200
2210
Datum/Pitch
Length
(mm)
1173
1186
1199
1211
1224
1237
1250
1262
1275
1288
1300
1313
1326
1338
1351
1364
1377
1389
1402
1415
1440
1465
1491
1516
1542
1567
1592
1618
1643
1669
1694
1719
1745
1770
1796
1821
1846
1872
1897
1923
1948
1973
1999
2024
2050
2075
2100
2126
2139
2151
2164
2177
2189
2202
2227
2240
2253
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
4
Belt
Reference
B 88
B 89
B 90
B 91
B 92
B 93
B 94
B 95
B 96
B 97
B 98
B 99
B 100
B 101
B 102
B 103
B 104
B 105
B 106
B 107
B 108
B 109
B 110
B 111
B 112
B 113
B 114
B 115
B 116
B 117
B 118
B 119
B 120
B 121
B 122
B 124
B 126
B 127
B 128
B 129
B 130
B 131
B 132
B 134
B 135
B 136
B 138
B 140
B 142
B 143
B 144
B 146
B 148
B 150
B 151
B 152
B 154
Inside
Length
(mm)
2240
2260
2286
2311
2337
2360
2388
2413
2438
2464
2500
2520
2540
2565
2591
2615
2650
2667
2700
2725
2750
2775
2800
2819
2845
2870
2900
2920
2950
2965
3000
3025
3050
3073
3100
3150
3200
3226
3250
3277
3302
3327
3350
3400
3429
3450
3500
3550
3600
3630
3658
3700
3750
3810
3835
3860
3910
Datum/Pitch
Length
(mm)
2278
2304
2329
2354
2380
2405
2431
2456
2481
2507
2532
2558
2583
2608
2634
2659
2685
2710
2735
2761
2786
2812
2837
2862
2888
2913
2939
2964
2989
3015
3040
3066
3091
3116
3142
3193
3243
3269
3294
3320
3345
3370
3396
3447
3472
3497
3548
3599
3650
3675
3701
3751
3802
3853
3878
3904
3955
Features :
• Oil resistant • Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt
Reference
B 155
B 156
B 158
B 160
B 161
B 162
B 163
B 164
B 165
B 167
B 168
B 170
B 172
B 173
B 174
B 175
B 176
B 177
Inside
Length
(mm)
3937
3960
4000
4064
4100
4115
4140
4166
4200
4250
4267
4318
4370
4394
4420
4450
4470
4500
Datum/Pitch
Length
(mm)
3980
4005
4056
4107
4132
4158
4183
4209
4234
4285
4310
4361
4412
4437
4463
4488
4513
4539
Belt Length Factor (mm)
17 mm
11 mm
CLASSICAL SECTION : B
Wrapped V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Lp to La
26
Section
B
B Section
Li to Lp
43
Li to La
69
Manufacturing Range
406 - 16713 mm
Weight per metre (Kgs)
0.182
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
40 125 dp (mm)
17
11
Nominal Length (inches) : Li
‘PIX’ FRAS belts conforms to :
Minimum Order Qty.
(No. of V-Belts)
30
II 2GD c IIB X (Test report no. IB-03-4-934)
B / 17x11
Belt
Reference
B 178
B 180
B 181
B 184
B 185
B 186
B 187
B 189
B 190
B 191
B 192
B 195
B 196
B 197
B 198
B 199
B 200
B 204
Inside
Length
(mm)
4520
4572
4600
4674
4699
4724
4750
4800
4825
4850
4877
4950
4980
5000
5030
5050
5080
5182
Datum/Pitch
Length
(mm)
4564
4615
4640
4717
4742
4767
4793
4844
4869
4894
4920
4996
5021
5047
5072
5098
5123
5182
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
5
Belt
Reference
B 208
B 210
B 216
B 220
B 224
B 225
B 226
B 229
B 236
B 238
B 240
B 242
B 248
B 264
B 276
B 280
B 295
B 298
B 315
Inside
Length
(mm)
5300
5330
5486
5600
5690
5715
5740
5816
6000
6045
6100
6150
6300
6700
7000
7100
7500
7569
8000
Datum/Pitch
Length
(mm)
5326
5377
5529
5631
5733
5758
5783
5860
6037
6088
6139
6190
6342
6749
7053
7155
7536
7612
8044
22 mm
Features :
• Oil resistant • Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt
Reference
Inside
Length
(mm)
C 26
C 32
C 32.5
C 33
C 33.5
C 34
C 34.5
C 35
C 35.5
C 36
C 36.5
C 37
C 37.5
C 38
C 38.5
C 39
C 39.5
C 40
C 40.5
C 41
C 41.5
C 42
C 42.5
C 43
C 43.5
C 44
C 44.5
C 45
C 45.5
C 46
C 46.5
C 47
C 47.5
C 48
C 48.5
C 49
C 49.5
C 50
C 50.5
C 51
C 51.5
C 52
C 52.5
C 53
C 53.5
C 54
C 55
C 56
C 57
C 58
C 59
C 60
C 61
C 62
C 63
C 64
C 65
C 66
C 67
C 68
C 69
C 70
C 71
C 72
C 73
C 74
C 75
C 76
660
815
825
840
850
865
875
890
900
914
925
940
950
965
975
990
1000
1016
1030
1041
1050
1065
1080
1090
1105
1120
1130
1143
1155
1168
1180
1190
1200
1220
1230
1250
1260
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1830
1854
1880
1900
1930
Datum/Pitch
Length
(mm)
716
869
882
894
907
920
932
945
958
970
983
996
1009
1021
1034
1047
1059
1072
1085
1097
1110
1123
1136
1148
1161
1174
1186
1199
1212
1224
1237
1250
1263
1275
1288
1301
1313
1326
1339
1351
1364
1377
1390
1402
1415
1428
1453
1478
1504
1529
1555
1580
1605
1631
1656
1682
1707
1732
1758
1783
1809
1834
1859
1885
1910
1936
1961
1986
Belt Length Factor (mm)
14 mm
CLASSICAL SECTION : C
Wrapped V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Lp to La
32
Section
C
C Section
Li to Lp
56
Li to La
88
Manufacturing Range
788 - 16713 mm
Weight per metre (Kgs)
0.298
Dimensions
Angle
Rec. Min
Minimum Order Qty.
Degree Pulley Dia.
(No. of V-Belts)
Topwidth(mm) Thickness(mm)
40
200 dp (mm)
24
22
14
Nominal Length (inches) : Li
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
C / 22x14
Belt
Reference
Inside
Length
(mm)
C 77
C 78
C 79
C 80
C 81
C 82
C 82.5
C 83
C 83.5
C 84
C 84.5
C 85
C 86
C 86.5
C 87
C 88
C 89
C 90
C 91
C 92
C 93
C 94
C 95
C 96
C 97
C 98
C 99
C 100
C 101
C 102
C 103
C 104
C 105
C 106
C 107
C 108
C 109
C 110
C 111
C 112
C 113
C 114
C 115
C 116
C 117
C 118
C 119
C 120
C 122
C 124
C 125
C 126
C 128
C 130
C 132
C 134
C 136
C 138
C 140
C 142
C 143
C 144
C 146
C 148
C 150
C 152
C 154
C 156
1956
1980
2000
2032
2060
2083
2095
2100
2120
2134
2150
2160
2184
2200
2210
2240
2260
2286
2311
2337
2360
2388
2413
2438
2464
2500
2520
2540
2565
2591
2615
2650
2667
2700
2725
2750
2775
2800
2819
2845
2870
2900
2920
2950
2965
3000
3025
3050
3100
3150
3175
3200
3250
3302
3350
3400
3450
3500
3550
3600
3630
3658
3700
3750
3810
3860
3910
3960
Datum/Pitch
Length
(mm)
2012
2037
2063
2088
2113
2139
2152
2164
2177
2190
2202
2215
2240
2253
2266
2291
2317
2342
2367
2393
2418
2444
2469
2494
2520
2545
2571
2596
2621
2647
2672
2698
2723
2748
2774
2799
2825
2850
2875
2901
2926
2952
2977
3002
3028
3053
3079
3104
3155
3206
3231
3256
3307
3358
3409
3460
3510
3561
3612
3663
3688
3714
3764
3815
3866
3917
3968
4018
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
6
Belt
Reference
C 158
C 160
C 161
C 162
C 163
C 164
C 165
C 167
C 168
C 170
C 172
C 173
C 174
C 175
C 176
C 177
C 180
C 181
C 184
C 185
C 187
C 188
C 190
C 192
C 195
C 196
C 197
C 198
C 199
C 200
C 204
C 205
C 208
C 210
C 211
C 212
C 214
C 215
C 216
C 220
C 222
C 224
C 225
C 228
C 236
C 238
C 240
C 242
C 248
C 250
C 255
C 260
C 264
C 265
C 270
C 276
C 280
C 285
C 295
C 300
C 314
C 315
C 324
C 328
C 334
C 354
C 356
C 360
Inside
Length
(mm)
4000
4064
4100
4115
4140
4166
4200
4250
4267
4318
4370
4394
4420
4450
4470
4500
4572
4600
4674
4699
4750
4775
4825
4877
4950
4980
5000
5030
5050
5080
5182
5200
5300
5330
5360
5385
5435
5461
5486
5600
5639
5690
5715
5800
6000
6045
6100
6150
6300
6350
6477
6604
6700
6731
6858
7000
7100
7239
7500
7620
7976
8000
8230
8331
8484
9000
9050
9144
Datum/Pitch
Length
(mm)
4069
4120
4145
4171
4196
4222
4247
4298
4323
4374
4425
4450
4476
4501
4526
4552
4628
4653
4730
4755
4806
4831
4882
4933
5009
5034
5060
5085
5111
5136
5238
5263
5339
5390
5415
5441
5492
5517
5542
5644
5695
5746
5771
5847
6050
6101
6152
6203
6355
6406
6533
6660
6762
6787
6914
7066
7168
7295
7549
7676
8032
8057
8286
8387
8540
9048
9098
9200
• Oil resistant • Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt
Reference
Inside
Length
(mm)
Datum/Pitch
Length
(mm)
D 45
D 45.5
D 46
D 46.5
D 47
D 47.5
D 48
D 48.5
D 49
D 49.5
D 50
D 50.5
D 51
D 51.5
D 52
D 52.5
D 53
D 53.5
D 54
D 55
D 56
D 57
D 58
D 59
D 60
D 61
D 62
D 63
D 64
D 65
D 66
D 67
D 68
D 69
D 70
D 71
D 72
D 73
D 74
D 75
D 76
D 77
D 78
D 79
D 80
D 81
D 82
D 82.5
D 83
D 83.5
D 84
D 84.5
D 85
D 86
D 86.5
D 87
D 88
D 89
1143
1155
1168
1180
1190
1200
1220
1230
1250
1260
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1830
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2095
2100
2120
2134
2150
2160
2184
2200
2210
2240
2260
1222
1235
1247
1260
1273
1286
1298
1311
1324
1336
1349
1362
1374
1387
1400
1413
1425
1438
1451
1476
1501
1527
1552
1578
1603
1628
1654
1679
1705
1730
1755
1781
1806
1832
1857
1882
1908
1933
1959
1984
2009
2035
2060
2086
2111
2136
2162
2175
2187
2200
2213
2225
2238
2263
2276
2289
2314
2340
32 mm
Belt Length Factor (mm)
19 mm
CLASSICAL SECTION : D
Wrapped V-Belts
Standard : ISO 4183, ISO 4184, BS 3790,
Features : DIN 2215
Lp to La
40
Section
D
Li to Lp
79
Li to La
119
Weight per metre (Kgs)
0.608
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
19
32
40
355 dp(mm)
Nominal Length (inches) : Li
‘PIX’ FRAS belts conforms to :
D Section
Manufacturing Range
1125 - 16815 mm
Minimum Order Qty.
(No. of V-Belts)
15
II 2GD c IIB X (Test report no. IB-03-4-934)
D / 32x19
Belt
Reference
D 90
D 91
D 92
D 93
D 94
D 95
D 96
D 97
D 98
D 99
D 100
D 101
D 102
D 103
D 104
D 105
D 106
D 107
D 108
D 109
D 110
D 112
D 113
D 114
D 115
D 116
D 117
D 118
D 119
D 120
D 122
D 124
D 126
D 128
D 130
D 132
D 134
D 136
D 137
D 138
D 140
D 142
D 143
D 144
D 146
D 148
D 150
D 152
D 154
D 156
D 158
D 161
D 162
D 163
D 165
D 167
D 168
D 169
Inside
Length
(mm)
Datum/Pitch
Length
(mm)
2286
2311
2337
2360
2388
2413
2438
2464
2500
2520
2540
2565
2591
2615
2650
2667
2700
2725
2750
2775
2800
2845
2870
2900
2920
2950
2965
3000
3025
3050
3100
3150
3200
3250
3302
3350
3400
3450
3480
3500
3550
3600
3630
3658
3700
3750
3810
3860
3910
3960
4000
4100
4115
4140
4200
4250
4267
4293
2365
2390
2416
2441
2467
2492
2517
2543
2568
2594
2619
2644
2670
2695
2721
2746
2771
2797
2822
2848
2873
2924
2949
2975
3000
3025
3051
3076
3102
3127
3178
3229
3279
3330
3381
3432
3483
3533
3559
3584
3635
3686
3711
3737
3787
3838
3889
3940
3991
4041
4092
4168
4194
4219
4270
4321
4346
4372
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
7
Belt
Reference
D 172
D 173
D 174
D 175
D 176
D 177
D 180
D 181
D 187
D 190
D 195
D 196
D 197
D 198
D 199
D 200
D 204
D 205
D 208
D 210
D 220
D 225
D 228
D 236
D 238
D 240
D 242
D 248
D 253
D 254
D 255
D 264
D 268
D 270
D 272
D 276
D 280
D 285
D 295
D 297
D 300
D 314
D 315
D 320
D 326
D 330
D 335
D 345
D 351
D 354
D 358
D 360
D 364
D 374
D 390
D 394
D 441
D 478
Inside
Length
(mm)
Datum/Pitch
Length
(mm)
4370
4394
4420
4450
4470
4500
4572
4600
4750
4825
4950
4980
5000
5030
5050
5080
5182
5200
5300
5330
5600
5715
5800
6000
6045
6100
6150
6300
6426
6452
6477
6700
6807
6858
6900
7000
7100
7239
7500
7550
7620
7976
8000
8128
8280
8385
8510
8763
8915
9000
9100
9144
9246
9500
9906
10000
11200
12141
4448
4473
4499
4524
4549
4575
4651
4676
4829
4905
5032
5057
5083
5108
5134
5159
5261
5286
5362
5413
5667
5794
5870
6073
6124
6175
6226
6378
6505
6531
6556
6785
6886
6937
6988
7089
7191
7318
7572
7623
7699
8055
8080
8207
8359
8464
8590
8842
8994
9070
9172
9223
9325
9579
9985
10079
11280
12220
CLASSICAL SECTION : 20
Wrapped V-Belts
Standard : DIN 2215
Features :
• Oil resistant • Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt Length Factor (mm)
20 mm
Section
12.5 mm
20
Inside
Length
(inches)
20 x 896
20 x 900
20 x 1000
20 x 1060
20 x 1120
20 x 1180
20 x 1250
20 x 1320
20 x 1400
20 x 1500
20 x 1600
20 x 1700
20 x 1800
20 x 1900
20 x 2000
20 x 2120
20 x 2240
35.28
35.43
39.37
41.73
44.09
46.46
49.21
51.97
55.12
59.06
62.99
66.93
70.87
74.80
78.74
83.46
88.19
Li to Lp
48
Li to La
79
Manufacturing Range
896 - 9525 mm
944
948
1048
1108
1168
1228
1298
1368
1448
1548
1648
1748
1848
1948
2048
2168
2288
CLASSICAL SECTION : 25
Wrapped V-Belts
Standard : DIN 2215
Features :
• Oil resistant • Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt
Reference
20xLi (mm)
Inside
Length
(inches)
20 x 2360
20 x 2500
20 x 2650
20 x 2800
20 x 3000
20 x 3150
20 x 3350
20 x 3550
20 x 3750
20 x 4000
20 x 4250
20 x 4500
20 x 5000
20 x 5300
20 x 5600
20 x 6000
20 x 6100
92.91
98.43
104.33
110.24
118.11
124.02
131.89
139.76
147.64
157.48
167.32
177.17
196.85
208.66
220.47
236.22
240.15
2408
2548
2698
2848
3048
3198
3398
3598
3798
4048
4298
4548
5048
5348
5648
6048
6148
Section
25
Li to Lp
61
Inside
Length
(inches)
20 x 6150
20 x 6300
20 x 6350
20 x 6550
20 x 6700
20 x 6750
20 x 7000
20 x 7100
20 x 7250
20 x 7500
20 x 8000
20 x 8300
20 x 8600
20 x 9000
20 x 9525
242.13
248.03
250.00
257.87
263.77
265.75
275.50
279.50
285.43
295.28
314.96
326.77
338.58
354.33
375.00
Li to La
100
Manufacturing Range
1448 - 16637 mm
Inside
Length
(inches)
Datum/Pitch
Length
(mm)
25 x 1400
25 x 1448
25 x 1500
25 x 1600
25 x 1700
25 x 1800
25 x 1850
25 x 1900
25 x 2000
25 x 2120
25 x 2240
25 x 2360
25 x 2500
25 x 2650
25 x 2700
25 x 2800
25 x 3000
25 x 3150
25 x 3350
25 x 3450
25 x 3550
55.12
57.00
59.06
62.99
66.93
70.87
72.83
74.80
78.74
83.46
88.19
92.91
98.43
104.33
106.30
110.24
118.11
124.02
131.89
135.83
139.76
1461
1509
1561
1661
1761
1861
1911
1961
2061
2181
2301
2421
2561
2711
2761
2861
3061
3211
3411
3511
3611
Inside
Length
(inches)
Datum/Pitch
Length
(mm)
25 x 3750
25 x 4000
25 x 4250
25 x 4450
25 x 4500
25 x 4750
25 x 5000
25 x 5300
25 x 5600
25 x 6000
25 x 6300
25 x 6700
25 x 7100
25 x 7500
25 x 8000
25 x 8500
25 x 9000
25 x 9250
25 x 9500
25 x 9750
25x10000
147.64
157.48
167.32
175.20
177.17
187.01
196.85
208.66
220.47
236.22
248.03
263.78
279.53
295.28
314.96
334.65
354.33
364.17
374.02
383.86
393.70
3811
4061
4311
4511
4561
4811
5061
5361
5661
6061
6361
6761
7161
7561
8061
8561
9061
9311
9561
9811
10061
8
Minimum Order Qty.
(No. of V-Belts)
40
25 / 25x16
Belt
Reference
25xLi (mm)
• Prices on request • Non standard stock items are available on request
6198
6348
6398
6598
6748
6798
7048
7148
7298
7548
8048
8348
8648
9048
9573
II 2GD c IIB X (Test report no. IB-03-4-934)
25 / 25x16
Belt
Reference
25xLi (mm)
Datum/Pitch
Length
(mm)
Weight per metre (Kgs)
0.393
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40
25
16
250 dp (mm)
Nominal Length (inches) : Li
‘PIX’ FRAS belts conforms to :
Section : 25
25 / 25x16
Belt
Reference
20xLi (mm)
Belt Length Factor (mm)
Lp to La
39
16 mm
30
20 / 20x12.5
Datum/Pitch
Length
(mm)
25 mm
Minimum Order Qty.
(No. of V-Belts)
II 2GD c IIB X (Test report no. IB-03-4-934)
20 / 20x12.5
Datum/Pitch
Length
(mm)
Weight per metre (Kgs)
0.243
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40 160 dp (mm)
20
12.5
Nominal Length (inches) : Li
‘PIX’ FRAS belts conforms to :
Section : 20
20 / 20x12.5
Belt
Reference
20xLi (mm)
Lp to La
31
Belt
Reference
25xLi (mm)
25x10250
25x10500
25x10750
25x11000
25x11250
25x11500
25x11750
25x12000
25x12250
25x12550
25x12750
25x13000
25x13250
25x13500
25x13750
25x14000
25x14250
25x14500
Inside
Length
(inches)
Datum/Pitch
Length
(mm)
403.54
413.39
423.23
433.07
442.91
452.76
462.60
472.44
482.28
494.09
501.97
511.81
521.65
531.50
541.34
551.18
561.02
570.87
10311
10561
10811
11061
11311
11561
11811
12061
12311
12611
12811
13061
13311
13561
13811
14061
14311
14561
38 mm
CLASSICAL SECTION : E
Wrapped V-Belts
Standard : ISO 4183, ISO 4184, BS 3790,
Features : DIN 2215
23 mm
• Oil resistant• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
• ATEX certified FRAS belts are available
Belt Length Factor (mm)
Lp to La
53
Section
E
Li to Lp
92
Li to La
145
Manufacturing Range
2159 - 16713 mm
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40 500 dp (mm)
38
23
Nominal Length (inches) : Li
‘PIX’ FRAS belts conforms to :
Belt
Reference
E 118
E 144
E 145
E 158
E 180
E 197
E 210
E 220
E 226
3000
3658
3683
4000
4572
5000
5330
5600
5740
3092
3750
3772
4092
4664
5092
5422
5692
5832
10
II 2GD c IIB X (Test report no. IB-03-4-934)
E / 38x23
Datum/Pitch
Length
(mm)
Minimum Order Qty.
(No. of V-Belts)
E Section
E / 38x23
Inside
Length
(mm)
Weight per metre (Kgs)
0.900
E / 38x23
Belt
Reference
Inside
Length
(mm)
Datum/Pitch
Length
(mm)
E 236
E 240
E 248
E 270
E 280
E 295
E 300
E 315
E 330
6000
6100
6300
6858
7100
7500
7620
8000
8380
6092
6192
6392
6952
7192
7592
7712
8093
8474
• Prices on request • Non standard stock items are available on request
9
Belt
Reference
Inside
Length
(mm)
Datum/Pitch
Length
(mm)
E 354
E 360
E 390
E 394
E 420
E 441
E 480
E 492
9000
9144
9908
10010
10670
11200
12190
12500
9084
9236
10002
10100
10760
11293
12284
12589
WEDGE SECTION : SPZ
Wrapped V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 42 m/sec
• ATEX certified FRAS belts are available
SPZ / 10x8
Belt Length Factor (mm)
Lp to La
13
10 mm
Section
8 mm
SPZ
SPZ Section
Li to Lp
37
Li to La
50
Manufacturing Range
365 - 4953 mm
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
40
67 dp (mm)
10
8
Weight per metre (Kgs)
0.070
Minimum Order Qty.
(No. of V-Belts)
50
Nominal Length : Pitch length Lp in mm
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
SPZ / 10x8
SPZ / 10x8
Belt
Reference
Datum/Pitch
Length
(mm)
Belt
Reference
Datum/Pitch
Length
(mm)
SPZ 487
SPZ 500
SPZ 512
SPZ 530
SPZ 562
SPZ 575
SPZ 580
SPZ 587
SPZ 600
SPZ 612
SPZ 625
SPZ 630
SPZ 637
SPZ 662
SPZ 670
SPZ 687
SPZ 700
SPZ 710
SPZ 722
SPZ 737
SPZ 750
SPZ 760
SPZ 772
SPZ 775
SPZ 787
SPZ 800
SPZ 812
SPZ 825
SPZ 837
SPZ 850
SPZ 862
SPZ 875
SPZ 887
SPZ 900
SPZ 912
SPZ 922
SPZ 925
SPZ 937
SPZ 940
SPZ 950
SPZ 962
SPZ 975
SPZ 987
SPZ 1000
SPZ 1010
SPZ 1012
SPZ 1024
SPZ 1030
SPZ 1037
SPZ 1047
SPZ 1060
SPZ 1075
SPZ 1077
SPZ 1080
SPZ 1087
SPZ 1100
SPZ 1107
SPZ 1112
487
500
512
530
562
575
580
587
600
612
625
630
637
662
670
687
700
710
722
737
750
760
772
775
787
800
812
825
837
850
862
875
887
900
912
922
925
937
940
950
962
975
987
1000
1010
1012
1024
1030
1037
1047
1060
1075
1077
1080
1087
1100
1107
1112
SPZ 1120
SPZ 1137
SPZ 1140
SPZ 1147
SPZ 1150
SPZ 1162
SPZ 1171
SPZ 1180
SPZ 1187
SPZ 1200
SPZ 1212
SPZ 1220
SPZ 1237
SPZ 1250
SPZ 1262
SPZ 1270
SPZ 1280
SPZ 1287
SPZ 1300
SPZ 1312
SPZ 1320
SPZ 1337
SPZ 1340
SPZ 1347
SPZ 1350
SPZ 1362
SPZ 1375
SPZ 1387
SPZ 1400
SPZ 1412
SPZ 1420
SPZ 1425
SPZ 1437
SPZ 1450
SPZ 1462
SPZ 1470
SPZ 1487
SPZ 1500
SPZ 1512
SPZ 1520
SPZ 1537
SPZ 1550
SPZ 1560
SPZ 1562
SPZ 1580
SPZ 1587
SPZ 1600
SPZ 1612
SPZ 1620
SPZ 1637
SPZ 1650
SPZ 1662
SPZ 1687
SPZ 1700
SPZ 1737
SPZ 1750
SPZ 1762
SPZ 1787
1120
1137
1140
1147
1150
1162
1171
1180
1187
1200
1212
1220
1237
1250
1262
1270
1280
1287
1300
1312
1320
1337
1340
1347
1350
1362
1375
1387
1400
1412
1420
1425
1437
1450
1462
1470
1487
1500
1512
1520
1537
1550
1560
1562
1580
1587
1600
1612
1620
1637
1650
1662
1687
1700
1737
1750
1762
1787
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
10
Belt
Reference
SPZ 1800
SPZ 1812
SPZ 1837
SPZ 1850
SPZ 1862
SPZ 1887
SPZ 1900
SPZ 1912
SPZ 1937
SPZ 1950
SPZ 1962
SPZ 1987
SPZ 2000
SPZ 2030
SPZ 2037
SPZ 2050
SPZ 2062
SPZ 2087
SPZ 2100
SPZ 2120
SPZ 2125
SPZ 2137
SPZ 2150
SPZ 2160
SPZ 2175
SPZ 2180
SPZ 2187
SPZ 2237
SPZ 2240
SPZ 2250
SPZ 2262
SPZ 2280
SPZ 2287
SPZ 2300
SPZ 2360
SPZ 2400
SPZ 2410
SPZ 2430
SPZ 2437
SPZ 2500
SPZ 2540
SPZ 2580
SPZ 2600
SPZ 2650
SPZ 2690
SPZ 2720
SPZ 2800
SPZ 2840
SPZ 2900
SPZ 3000
SPZ 3150
SPZ 3170
SPZ 3250
SPZ 3350
SPZ 3450
SPZ 3550
Datum/Pitch
Length
(mm)
1800
1812
1837
1850
1862
1887
1900
1912
1937
1950
1962
1987
2000
2030
2037
2050
2062
2087
2100
2120
2125
2137
2150
2160
2175
2180
2187
2237
2240
2250
2262
2280
2287
2300
2360
2400
2410
2430
2437
2500
2540
2580
2600
2650
2690
2720
2800
2840
2900
3000
3150
3170
3250
3350
3450
3550
WEDGE SECTION : SPA
Wrapped V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 42 m/sec
• ATEX certified FRAS belts are available
SPA / 13x10
Belt Length Factor (mm)
13 mm
Lp to La
18
10 mm
SPA Section
Manufacturing Range
576 - 9246 mm
Weight per metre (Kgs)
0.119
Dimensions
Angle Rec. Min
Minimum Order Qty.
(No. of V-Belts)
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
SPA
40 100 dp (mm)
13
10
40
Nominal Length : Pitch length Lp in mm
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
SPA / 13x10
Belt
Reference
Belt
Reference
Datum/Pitch
Length
(mm)
SPA 732
SPA 750
SPA 757
SPA 775
SPA 782
SPA 800
SPA 807
SPA 825
SPA 832
SPA 850
SPA 857
SPA 875
SPA 882
SPA 900
SPA 907
SPA 925
SPA 932
SPA 950
SPA 957
SPA 975
SPA 982
SPA 1000
SPA 1007
SPA 1025
SPA 1032
SPA 1050
SPA 1060
SPA 1082
SPA 1085
SPA 1090
SPA 1100
SPA 1107
SPA 1120
SPA 1132
SPA 1150
SPA 1157
SPA 1160
SPA 1180
SPA 1182
SPA 1200
SPA 1207
SPA 1220
SPA 1232
SPA 1250
SPA 1257
SPA 1272
SPA 1280
SPA 1282
SPA 1300
SPA 1307
SPA 1320
SPA 1332
SPA 1357
SPA 1360
SPA 1367
732
750
757
775
782
800
807
825
832
850
857
875
882
900
907
925
932
950
957
975
982
1000
1007
1025
1032
1050
1060
1082
1085
1090
1100
1107
1120
1132
1150
1157
1160
1180
1182
1200
1207
1220
1232
1250
1257
1272
1280
1282
1300
1307
1320
1332
1357
1360
1367
SPA 1382
SPA 1400
SPA 1407
SPA 1425
SPA 1432
SPA 1450
SPA 1457
SPA 1482
SPA 1500
SPA 1507
SPA 1525
SPA 1532
SPA 1550
SPA 1557
SPA 1582
SPA 1600
SPA 1607
SPA 1632
SPA 1650
SPA 1657
SPA 1682
SPA 1700
SPA 1707
SPA 1732
SPA 1750
SPA 1757
SPA 1782
SPA 1800
SPA 1807
SPA 1832
SPA 1850
SPA 1857
SPA 1882
SPA 1900
SPA 1907
SPA 1925
SPA 1932
SPA 1950
SPA 1957
SPA 1982
SPA 2000
SPA 2032
SPA 2057
SPA 2060
SPA 2082
SPA 2107
SPA 2120
SPA 2125
SPA 2132
SPA 2150
SPA 2157
SPA 2182
SPA 2207
SPA 2232
SPA 2240
1382
1400
1407
1425
1432
1450
1457
1482
1500
1507
1525
1532
1550
1557
1582
1600
1607
1632
1650
1657
1682
1700
1707
1732
1750
1757
1782
1800
1807
1832
1850
1857
1882
1900
1907
1925
1932
1950
1957
1982
2000
2032
2057
2060
2082
2107
2120
2125
2132
2150
2157
2182
2207
2232
2240
11
Li to La
63
Section
Datum/Pitch
Length
(mm)
• Prices on request • Non standard stock items are available on request
Li to Lp
45
SPA / 13x10
Belt
Reference
Datum/Pitch
Length
(mm)
SPA 2250
SPA 2267
SPA 2282
SPA 2300
SPA 2307
SPA 2332
SPA 2350
SPA 2360
SPA 2382
SPA 2432
SPA 2475
SPA 2482
SPA 2492
SPA 2500
SPA 2532
SPA 2582
SPA 2607
SPA 2625
SPA 2632
SPA 2650
SPA 2682
SPA 2732
SPA 2782
SPA 2800
SPA 2832
SPA 2847
SPA 2882
SPA 2900
SPA 2932
SPA 2982
SPA 3000
SPA 3032
SPA 3070
SPA 3082
SPA 3150
SPA 3182
SPA 3200
SPA 3250
SPA 3282
SPA 3350
SPA 3382
SPA 3450
SPA 3482
SPA 3500
SPA 3550
SPA 3600
SPA 3670
SPA 3700
SPA 3750
SPA 4000
SPA 4250
SPA 4500
SPA 4590
SPA 5000
2250
2267
2282
2300
2307
2332
2350
2360
2382
2432
2475
2482
2492
2500
2532
2582
2607
2625
2632
2650
2682
2732
2782
2800
2832
2847
2882
2900
2932
2982
3000
3032
3070
3082
3150
3182
3200
3250
3282
3350
3382
3450
3482
3500
3550
3600
3670
3700
3750
4000
4250
4500
4590
5000
WEDGE SECTION : SPB
Wrapped V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 42 m/sec
• ATEX certified FRAS belts are available
SPB / 17x14
Belt
Reference
Datum/Pitch
Length
(mm)
SPB 1250
SPB 1260
SPB 1280
SPB 1300
SPB 1320
SPB 1340
SPB 1360
SPB 1400
SPB 1410
SPB 1440
SPB 1450
SPB 1500
SPB 1510
SPB 1540
SPB 1550
SPB 1560
SPB 1590
SPB 1600
SPB 1650
SPB 1690
SPB 1700
SPB 1750
SPB 1780
SPB 1800
SPB 1850
SPB 1900
SPB 1950
SPB 2000
1250
1260
1280
1300
1320
1340
1360
1400
1410
1440
1450
1500
1510
1540
1550
1560
1590
1600
1650
1690
1700
1750
1780
1800
1850
1900
1950
2000
Belt Length Factor (mm)
17 mm
Lp to La
28
Section
14 mm
SPB
Li to Lp
60
Li to La
88
Manufacturing Range
940 - 16764 mm
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
40 160 dp (mm)
17
14
Weight per metre (Kgs)
0.214
Minimum Order Qty.
(No. of V-Belts)
28
Nominal Length : Pitch length Lp in mm
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
SPB Section
SPB / 17x14
SPB / 17x14
Belt
Reference
Datum/Pitch
Length
(mm)
Belt
Reference
Datum/Pitch
Length
(mm)
SPB 2020
SPB 2025
SPB 2030
SPB 2060
SPB 2120
SPB 2125
SPB 2150
SPB 2180
SPB 2200
SPB 2240
SPB 2275
SPB 2280
SPB 2300
SPB 2310
SPB 2360
SPB 2380
SPB 2400
SPB 2410
SPB 2430
SPB 2500
SPB 2530
SPB 2540
SPB 2580
SPB 2600
SPB 2650
SPB 2675
SPB 2680
SPB 2720
2020
2025
2030
2060
2120
2125
2150
2180
2200
2240
2275
2280
2300
2310
2360
2380
2400
2410
2430
2500
2530
2540
2580
2600
2650
2675
2680
2720
SPB 2750
SPB 2800
SPB 2840
SPB 2850
SPB 2900
SPB 2990
SPB 3000
SPB 3150
SPB 3170
SPB 3200
SPB 3250
SPB 3270
SPB 3340
SPB 3350
SPB 3450
SPB 3550
SPB 3620
SPB 3650
SPB 3750
SPB 3800
SPB 3825
SPB 3870
SPB 4000
SPB 4050
SPB 4060
SPB 4250
SPB 4310
SPB 4370
SPB / 17x14
Belt
Reference
Datum/Pitch
Length
(mm)
2750
2800
2840
2850
2900
2990
3000
3150
3170
3200
3250
3270
3340
3350
3450
3550
3620
3650
3750
3800
3825
3870
4000
4050
4060
4250
4310
4370
SPB 4500
SPB 4560
SPB 4750
SPB 4820
SPB 5000
SPB 5070
SPB 5300
SPB 5380
SPB 5600
SPB 5680
SPB 5990
SPB 6000
SPB 6300
SPB 6340
SPB 6700
SPB 6720
SPB 7100
SPB 7500
SPB 7610
SPB 7990
SPB 8000
SPB 8500
SPB 9000
SPB 9010
4500
4560
4750
4820
5000
5070
5300
5380
5600
5680
5990
6000
6300
6340
6700
6720
7100
7500
7610
7990
8000
8500
9000
9010
Belt Length Factor (mm)
Manufacturing Range
1750 - 16789 mm
WEDGE SECTION : SPC
Wrapped V-Belts
Standard : BS 3790
22 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 42 m/sec
• ATEX certified FRAS belts are available
SPC / 22x18
Belt
Reference
Datum/Pitch
Length
(mm)
SPC 1750
SPC 2000
SPC 2120
SPC 2150
SPC 2210
SPC 2240
SPC 2360
SPC 2500
SPC 2620
SPC 2650
SPC 2800
SPC 2890
SPC 3000
1750
2000
2120
2150
2210
2240
2360
2500
2620
2650
2800
2890
3000
Lp to La
30
18 mm
Section
SPC
SPC / 22x18
Belt
Reference
SPC 3150
SPC 3350
SPC 3550
SPC 3650
SPC 3700
SPC 3750
SPC 3950
SPC 4000
SPC 4100
SPC 4250
SPC 4400
SPC 4500
SPC 4750
3150
3350
3550
3650
3700
3750
3950
4000
4100
4250
4400
4500
4750
Li to La
113
Dimensions
Angle
Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40
18
224 dp (mm)
22
Weight per metre (Kgs)
0.360
Minimum Order Qty.
(No. of V-Belts)
20
Nominal Length : Pitch length Lp in mm
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
SPC Section
Datum/Pitch
Length
(mm)
Li to Lp
83
SPC / 22x18
Belt
Reference
Belt
Reference
Datum/Pitch
Length
(mm)
SPC 4900
SPC 5000
SPC 5300
SPC 5600
SPC 6000
SPC 6150
SPC 6300
SPC 6370
SPC 6500
SPC 6600
SPC 6700
SPC 7020
SPC 7100
4900
5000
5300
5600
6000
6150
6300
6370
6500
6600
6700
7020
7100
SPC 7500
SPC 8000
SPC 8300
SPC 8400
SPC 8500
SPC 9000
SPC 9500
SPC 10000
SPC 10500
SPC 10600
SPC 11200
SPC 11500
SPC 12500
7500
8000
8300
8400
8500
9000
9500
10000
10500
10600
11200
11500
12500
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
12
SPC / 22x18
Datum/Pitch
Length
(mm)
HIGH CAPACITY NARROW V-BELTS : 3V
Wrapped V-Belts
Standard : RMA IP 22
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 42 m/sec
Belt Length Factor (mm)
9.7 mm
Lp to La
13
8 mm
Section : 3V
Li to Lp
37
Li to La
50
Manufacturing Range
195 - 4826 mm
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
9.7
40
8
3V
67 de (mm)
Nominal Length : Belt no /10 = La in inches
Section
3V / 9.7x8
Weight per metre (Kgs)
0.074
Minimum Order Qty.
(No. of V-Belts)
50
Belt
Reference
Outside
Length
(mm)
Belt
Reference
Outside
Length
(mm)
Belt
Reference
Outside
Length
(mm)
Belt
Reference
Outside
Length
(mm)
3V 250
3V 260
3V 265
3V 280
3V 300
3V 315
3V 335
3V 350
3V 355
3V 370
635
660
673
711
762
800
851
889
902
940
3V 375
3V 400
3V 425
3V 450
3V 475
3V 500
3V 520
3V 530
3V 560
3V 600
953
1016
1080
1143
1207
1270
1321
1346
1422
1524
3V 617
3V 630
3V 670
3V 710
3V 750
3V 800
3V 850
3V 900
3V 950
3V 960
1567
1600
1702
1803
1905
2032
2159
2286
2413
2438
3V 1000
3V 1060
3V 1120
3V 1180
3V 1250
3V 1320
3V 1400
3V 1425
3V 1450
3V 1500
2540
2692
2845
2997
3175
3353
3556
3620
3683
3810
HIGH CAPACITY NARROW V-BELTS : 5V
Wrapped V-Belts
Standard : RMA IP 22
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 42 m/sec
16 mm
Belt Length Factor (mm)
Lp to La
25
14 mm
Li to La
85
Manufacturing Range
1219 - 16612 mm
Section
5V / 16x14
Section : 5V
Li to Lp
60
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
5V
40
180 de (mm)
16
14
Nominal Length : Belt no /10 = La in inches
Belt
Reference
Outside
Length
(mm)
Belt
Reference
Outside
Length
(mm)
Belt
Reference
Outside
Length
(mm)
5V 500
5V 530
5V 560
5V 600
5V 630
5V 670
5V 710
5V 750
5V 800
1270
1346
1422
1524
1600
1702
1803
1905
2032
5V 850
5V 900
5V 950
5V 1000
5V 1060
5V 1120
5V 1180
5V 1250
5V 1320
2159
2286
2413
2540
2692
2845
2997
3175
3353
5V 1400
5V 1500
5V 1600
5V 1700
5V 1800
5V 1900
5V 2000
5V 2120
5V 2240
3556
3810
4064
4318
4572
4826
5080
5385
5690
Weight per metre (Kgs)
0.201
Minimum Order Qty.
(No. of V-Belts)
30
Belt
Reference
Outside
Length
(mm)
5V 2360
5V 2500
5V 2650
5V 2800
5V 3000
5V 3150
5V 3350
5V 3550
5994
6350
6731
7112
7620
8001
8509
9017
HIGH CAPACITY NARROW V-BELTS : 8V
Wrapped V-Belts
Standard : RMA IP 22
25 mm
Belt Length Factor (mm)
Lp to La
53
23 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 42 m/sec
Section
8V
Section : 8V
8V / 25x23
Li to Lp
92
Li to La
145
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
40
317 de mm
25
23
Outside
Length
(mm)
Belt
Reference
Outside
Length
(mm)
Belt
Reference
Outside
Length
(mm)
8V 1000
8V 1060
8V 1120
8V 1180
8V 1250
8V 1320
8V 1400
8V 1500
2540
2692
2845
2997
3175
3353
3556
3810
8V 1600
8V 1700
8V 1800
8V 1900
8V 2000
8V 2120
8V 2240
8V 2360
4064
4318
4572
4826
5080
5385
5690
5994
8V 2500
8V 2650
8V 2800
8V 3000
8V 3150
8V 3350
8V 3550
8V 3750
6350
6731
7112
7620
8001
8509
9017
9525
13
Weight per metre (Kgs)
0.589
Minimum Order Qty.
(No. of V-Belts).
20
Nominal Length : Belt no /10 = La in inches
Belt
Reference
• Prices on request • Non standard stock items are available on request
Manufacturing Range
2286 - 16612 mm
Belt
Reference
Outside
Length
(mm)
8V 4000
8V 4250
8V 4500
8V 4750
8V 5000
8V 5250
8V 5500
10160
10795
11430
12065
12700
13335
13970
CLASSICAL SECTION : ZX
PIX ‘X’ tra : Cut Edge V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
• ATEX certified FRAS belts are available
Belt Length Factor (mm)
10 mm
6 mm
Belt
Reference
ZX 22
ZX 24.5
ZX 25
ZX 25.5
ZX 26
ZX 26.5
ZX 27
ZX 27.5
ZX 28
ZX 28.5
ZX 29
ZX 29.5
ZX 30
ZX 30.5
ZX 31
ZX 31.5
ZX 32
ZX 32.5
ZX 33
ZX 33.5
ZX 34
ZX 34.5
ZX 35
ZX 35.5
ZX 36
ZX 36.5
ZX 37
ZX 37.5
ZX 38
ZX 38.5
ZX 39
ZX 39.5
ZX 40
ZX 40.5
ZX 41
ZX 41.5
ZX 42
ZX 42.5
560
620
635
650
660
675
686
700
710
725
735
750
760
775
790
800
815
825
840
850
865
875
890
900
914
925
940
950
965
975
990
1000
1016
1030
1041
1050
1065
1080
Section
ZX
ZX Section
ZX / 10x6
Inside
Length
(mm)
Lp to La
16
Li to Lp
22
Li to La
38
Manufacturing Range
24 - 200 inches
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
36
10
6
40 dp(mm)
582
642
657
672
682
697
708
722
732
747
757
772
782
797
812
822
837
847
862
872
887
897
912
922
936
947
962
972
987
997
1012
1022
1038
1052
1063
1072
1087
1102
Belt
Reference
ZX 43
ZX 43.5
ZX 44
ZX 44.5
ZX 45
ZX 45.5
ZX 46
ZX 46.5
ZX 47
ZX 47.5
ZX 48
ZX 48.5
ZX 49
ZX 49.5
ZX 50
ZX 50.5
ZX 51
ZX 51.5
ZX 52
ZX 52.5
ZX 53
ZX 53.5
ZX 54
ZX 55
ZX 56
ZX 57
ZX 58
ZX 59
ZX 60
ZX 61
ZX 62
ZX 63
ZX 64
ZX 65
ZX 66
ZX 67
ZX 68
ZX 69
Minimum Order Qty.
(No. of V-Belts)
40
Nominal Length (Inches) : Inside length
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
ZX / 10x6
Datum/Pitch
Length
(mm)
Weight per metre (Kgs)
0.056
Inside
Length
(mm)
1090
1105
1120
1130
1143
1155
1168
1180
1190
1200
1220
1230
1250
1260
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
ZX / 10x6
Datum/Pitch
Length
(mm)
1112
1127
1142
1152
1165
1177
1190
1202
1212
1222
1242
1252
1272
1282
1292
1307
1322
1332
1342
1357
1372
1382
1397
1422
1444
1472
1497
1522
1547
1572
1597
1622
1647
1672
1698
1722
1747
1772
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
14
Belt
Reference
ZX 70
ZX 71
ZX 72
ZX 73
ZX 74
ZX 75
ZX 76
ZX 77
ZX 78
ZX 79
ZX 80
ZX 81
ZX 82
ZX 82.5
ZX 83
ZX 83.5
ZX 84
ZX 84.5
ZX 85
ZX 86
ZX 86.5
ZX 87
ZX 88
ZX 89
ZX 90
ZX 91
ZX 92
ZX 93
ZX 94
ZX 95
ZX 96
ZX 97
ZX 98
ZX 99
ZX 100
Inside
Length
(mm)
1775
1800
1830
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2095
2100
2120
2134
2150
2160
2184
2200
2210
2240
2260
2286
2311
2337
2360
2388
2413
2438
2464
2500
2520
2540
Datum/Pitch
Length
(mm)
1797
1822
1852
1876
1902
1922
1952
1978
2002
2022
2054
2082
2105
2117
2122
2142
2156
2172
2182
2206
2222
2232
2262
2282
2308
2333
2359
2382
2410
2435
2460
2486
2522
2542
2562
CLASSICAL SECTION : AX
PIX ‘X’ tra : Cut Edge V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
• ATEX certified FRAS belts are available
Belt
Reference
AX 24
AX 24.5
AX 25
AX 25.5
AX 26
AX 26.5
AX 27
AX 27.5
AX 28
AX 28.5
AX 29
AX 29.5
AX 30
AX 30.5
AX 31
AX 31.5
AX 32
AX 32.5
AX 33
AX 33.5
AX 34
AX 34.5
AX 35
AX 35.5
AX 36
AX 36.5
AX 37
AX 37.5
AX 38
AX 38.5
AX 39
AX 39.5
AX 40
AX 40.5
AX 41
AX 41.5
AX 42
AX 42.5
AX 43
AX 43.5
AX 44
AX 44.5
AX 45
AX 45.5
AX 46
AX 46.5
610
620
635
650
660
675
686
700
710
725
735
750
760
775
790
800
815
825
840
850
865
875
890
900
914
925
940
950
965
975
990
1000
1016
1030
1041
1050
1065
1080
1090
1105
1120
1130
1143
1155
1168
1180
Lp to La
14
8 mm
Section
AX
AX Section
Li to Lp
36
Li to La
50
Manufacturing Range
24 - 200 inches
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
36
13
8
60 dp (mm)
AX / 13x8
Datum/Pitch
Length
(mm)
646
658
671
684
696
709
722
735
747
760
773
785
798
811
823
836
849
862
874
887
900
912
925
938
950
963
976
989
1001
1014
1027
1039
1052
1065
1077
1090
1103
1116
1128
1141
1154
1166
1179
1192
1204
1217
Weight per metre (Kgs)
0.106
Minimum Order Qty.
(No. of V-Belts)
30
Nominal Length (Inches) : Inside length
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
AX / 13x8
Inside
Length
(mm)
Belt Length Factor (mm)
13 mm
Belt
Reference
AX 47
AX 47.5
AX 48
AX 48.5
AX 49
AX 49.5
AX 50
AX 50.5
AX 51
AX 51.5
AX 52
AX 52.5
AX 53
AX 53.5
AX 54
AX 55
AX 56
AX 57
AX 58
AX 59
AX 60
AX 61
AX 62
AX 63
AX 64
AX 65
AX 66
AX 67
AX 68
AX 69
AX 70
AX 71
AX 72
AX 73
AX 74
AX 75
AX 76
AX 77
AX 78
AX 79
AX 80
AX 81
AX 82
AX 82.5
AX 83
AX 83.5
Inside
Length
(mm)
1190
1200
1220
1230
1250
1260
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1830
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2095
2100
2120
AX / 13x8
Datum/Pitch
Length
(mm)
1230
1243
1255
1268
1281
1293
1306
1319
1331
1344
1357
1370
1382
1395
1408
1433
1458
1484
1509
1535
1560
1585
1611
1636
1662
1687
1712
1738
1763
1789
1814
1839
1865
1890
1916
1941
1966
1992
2017
2043
2068
2093
2119
2132
2144
2157
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
15
Belt
Reference
AX 84
AX 84.5
AX 85
AX 86
AX 86.5
AX 87
AX 88
AX 89
AX 90
AX 91
AX 92
AX 93
AX 94
AX 95
AX 96
AX 97
AX 98
AX 99
AX 100
AX 101
AX 102
AX 103
AX 104
AX 105
AX 106
AX 107
AX 108
AX 109
AX 110
AX 112
AX 113
AX 114
AX 115
AX 116
AX 117
AX 118
AX 119
AX 120
AX 122
AX 124
AX 126
AX 128
AX 130
AX 132
Inside
Length
(mm)
2134
2150
2160
2184
2200
2210
2240
2260
2286
2311
2337
2360
2388
2413
2438
2464
2500
2520
2540
2565
2591
2615
2650
2667
2700
2725
2750
2775
2800
2845
2870
2900
2920
2950
2965
3000
3025
3050
3100
3150
3200
3250
3302
3350
Datum/Pitch
Length
(mm)
2170
2182
2195
2220
2233
2246
2271
2297
2322
2347
2373
2398
2424
2449
2474
2500
2525
2551
2576
2601
2627
2652
2678
2703
2728
2754
2779
2805
2830
2881
2906
2932
2957
2982
3008
3033
3059
3084
3135
3186
3236
3287
3338
3389
CLASSICAL SECTION : BX
PIX ‘X’ tra : Cut Edge V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
• ATEX certified FRAS belts are available
Belt
Reference
BX 24
BX 24.5
BX 25
BX 25.5
BX 26
BX 26.5
BX 27
BX 27.5
BX 28
BX 28.5
BX 29
BX 29.5
BX 30
BX 30.5
BX 31
BX 31.5
BX 32
BX 32.5
BX 33
BX 33.5
BX 34
BX 34.5
BX 35
BX 35.5
BX 36
BX 36.5
BX 37
BX 37.5
BX 38
BX 38.5
BX 39
BX 39.5
BX 40
BX 40.5
BX 41
BX 41.5
BX 42
BX 42.5
BX 43
BX 43.5
BX 44
BX 44.5
BX 45
BX 45.5
BX 46
BX 46.5
BX 47
BX 47.5
BX 48
BX 48.5
BX 49
BX 49.5
17 mm
Belt Length Factor (mm)
Lp to La
26
Section
11 mm
BX
BX Section
BX / 17x11
Inside
Length
(mm)
Inside
Length
(mm)
610
620
635
650
660
675
686
700
710
725
735
750
760
775
790
800
815
825
840
850
865
875
890
900
914
925
940
950
965
975
990
1000
1016
1030
1041
1050
1065
1080
1090
1105
1120
1130
1143
1155
1168
1180
1190
1200
1220
1230
1250
1260
653
665
678
691
703
716
729
742
754
767
780
792
805
818
830
843
856
869
881
894
907
919
932
945
957
970
983
996
1008
1021
1034
1046
1059
1072
1084
1097
1110
1123
1135
1148
1161
1173
1186
1199
1211
1224
1237
1250
1262
1275
1288
1300
Belt
Reference
BX 50
BX 50.5
BX 51
BX 51.5
BX 52
BX 52.5
BX 53
BX 53.5
BX 54
BX 55
BX 56
BX 57
BX 58
BX 59
BX 60
BX 61
BX 62
BX 63
BX 64
BX 65
BX 66
BX 67
BX 68
BX 69
BX 70
BX 71
BX 72
BX 73
BX 74
BX 75
BX 76
BX 77
BX 78
BX 79
BX 80
BX 81
BX 82
BX 82.5
BX 83
BX 83.5
BX 84
BX 84.5
BX 85
BX 86
BX 86.5
BX 87
BX 88
BX 89
BX 90
BX 91
BX 92
BX 93
Li to La
69
Manufacturing Range
24 - 200 inches
Weight per metre (Kgs)
0.174
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
36 100 dp (mm)
17
11
Minimum Order Qty.
(No. of V-Belts)
25
Nominal Length (Inches) : Inside length
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
BX / 17x11
Datum/Pitch
Length
(mm)
Li to Lp
43
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1830
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2095
2100
2120
2134
2150
2160
2184
2200
2210
2240
2260
2286
2311
2337
2360
BX / 17x11
Datum/Pitch
Length
(mm)
1313
1326
1338
1351
1364
1377
1389
1402
1415
1440
1465
1491
1516
1542
1567
1592
1618
1643
1669
1694
1719
1745
1770
1796
1821
1846
1872
1897
1923
1948
1973
1999
2024
2050
2075
2100
2126
2139
2151
2164
2177
2189
2202
2227
2240
2253
2278
2304
2329
2354
2380
2405
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
16
Belt
Reference
BX 94
BX 95
BX 96
BX 96.5
BX 97
BX 98
BX 99
BX 100
BX 101
BX 102
BX 103
BX 104
BX 105
BX 106
BX 107
BX 108
BX 109
BX 110
BX 112
BX 113
BX 114
BX 115
BX 116
BX 117
BX 118
BX 119
BX 120
BX 122
BX 124
BX 126
BX 128
BX 130
BX 132
BX 134
BX 136
BX 138
BX 140
BX 142
BX 143
BX 144
BX 146
BX 148
BX 150
BX 152
BX 154
BX 156
BX 158
BX 161
BX 162
BX 163
BX 165
Inside
Length
(mm)
2388
2413
2438
2451
2464
2500
2520
2540
2565
2591
2615
2650
2667
2700
2725
2750
2775
2800
2845
2870
2900
2920
2950
2965
3000
3025
3050
3100
3150
3200
3250
3302
3350
3400
3450
3500
3550
3600
3630
3658
3700
3750
3810
3860
3910
3960
4000
4100
4115
4140
4200
Datum/Pitch
Length
(mm)
2431
2456
2481
2494
2507
2532
2558
2583
2608
2634
2659
2685
2710
2735
2761
2786
2812
2837
2888
2913
2939
2964
2989
3015
3040
3066
3091
3142
3193
3243
3294
3345
3396
3447
3497
3548
3599
3650
3675
3701
3751
3802
3853
3904
3955
4005
4056
4132
4158
4183
4234
CLASSICAL SECTION : CX
PIX ‘X’ tra : Cut Edge V-Belts
Standard : ISO 4183, ISO 4184, BS 3790, DIN 2215
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
• ATEX certified FRAS belts are available
Belt Length Factor (mm)
22 mm
Lp to La
32
14 mm
Section
CX
Li to Lp
56
Li to La
88
CX / 22x14
CX / 22x14
Belt
Reference
Inside
Length
(mm)
Datum/Pitch
Length
(mm)
Belt
Reference
Inside
Length
(mm)
Datum/Pitch
Length
(mm)
CX 32
CX 32.5
CX 33
CX 33.5
CX 34
CX 34.5
CX 35
CX 35.5
CX 36
CX 36.5
CX 37
CX 37.5
CX 38
CX 38.5
CX 39
CX 39.5
CX 40
CX 40.5
CX 41
CX 41.5
CX 42
CX 42.5
CX 43
CX 43.5
CX 44
CX 44.5
CX 45
CX 45.5
CX 46
CX 46.5
CX 47
CX 47.5
CX 48
CX 48.5
CX 49
CX 49.5
CX 50
CX 50.5
CX 51
CX 51.5
CX 52
CX 52.5
CX 53
CX 53.5
CX 54
CX 55
CX 56
815
825
840
850
865
875
890
900
914
925
940
950
965
975
990
1000
1016
1030
1041
1050
1065
1080
1090
1105
1120
1130
1143
1155
1168
1180
1190
1200
1220
1230
1250
1260
1270
1285
1300
1310
1320
1335
1350
1360
1375
1400
1422
869
882
894
907
920
932
945
958
970
983
996
1009
1021
1034
1047
1059
1072
1085
1097
1110
1123
1136
1148
1161
1174
1186
1199
1212
1224
1237
1250
1263
1275
1288
1301
1313
1326
1339
1351
1364
1377
1390
1402
1415
1428
1453
1478
CX 57
CX 58
CX 59
CX 60
CX 61
CX 62
CX 63
CX 64
CX 65
CX 66
CX 67
CX 68
CX 69
CX 70
CX 71
CX 72
CX 73
CX 74
CX 75
CX 76
CX 77
CX 78
CX 79
CX 80
CX 81
CX 82
CX 82.5
CX 83
CX 83.5
CX 84
CX 84.5
CX 85
CX 86
CX 86.5
CX 87
CX 88
CX 89
CX 90
CX 91
CX 92
CX 93
CX 94
CX 95
CX 96
CX 97
CX 98
CX 99
1450
1475
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1775
1800
1830
1854
1880
1900
1930
1956
1980
2000
2032
2060
2083
2095
2100
2120
2134
2150
2160
2184
2200
2210
2240
2260
2286
2311
2337
2360
2388
2413
2438
2464
2500
2520
1504
1529
1555
1580
1605
1631
1656
1682
1707
1732
1758
1783
1809
1834
1859
1885
1910
1936
1961
1986
2012
2037
2063
2088
2113
2139
2152
2164
2177
2190
2202
2215
2240
2253
2266
2291
2317
2342
2367
2393
2418
2444
2469
2494
2520
2545
2571
Minimum Order Qty.
(No. of V-Belts)
20
II 2GD c IIB X (Test report no. IB-03-4-934)
CX / 22x14
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
17
Weight per metre (Kgs)
0.306
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
36 160 dp (mm)
22
14
Nominal Length (Inches) : Li
‘PIX’ FRAS belts conforms to :
CX Section
Manufacturing Range
24 - 200 inches
Belt
Reference
CX 100
CX 101
CX 102
CX 103
CX 104
CX 105
CX 106
CX 107
CX 108
CX 109
CX 110
CX 112
CX 113
CX 114
CX 115
CX 116
CX 117
CX 118
CX 119
CX 120
CX 122
CX 124
CX 126
CX 128
CX 130
CX 132
CX 134
CX 136
CX 138
CX 140
CX 142
CX 143
CX 144
CX 146
CX 148
CX 150
CX 152
CX 154
CX 156
CX 158
CX 161
CX 162
CX 163
CX 165
Inside
Length
(mm)
Datum/Pitch
Length
(mm)
2540
2565
2591
2615
2650
2667
2700
2725
2750
2775
2800
2845
2870
2900
2920
2950
2965
3000
3025
3050
3100
3150
3200
3250
3302
3350
3400
3450
3500
3550
3600
3630
3658
3700
3750
3810
3860
3910
3960
4000
4100
4115
4140
4200
2596
2621
2647
2672
2698
2723
2748
2774
2799
2825
2850
2901
2926
2952
2977
3002
3028
3053
3079
3104
3155
3206
3256
3307
3358
3409
3460
3510
3561
3612
3663
3688
3714
3764
3815
3866
3917
3968
4018
4069
4145
4171
4196
4247
WEDGE SECTION : XPZ
PIX ‘X’ tra : Cut Edge V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
• ATEX certified FRAS belts are available
XPZ / 10x8
Belt
Reference
XPZ 612
XPZ 630
XPZ 637
XPZ 662
XPZ 670
XPZ 687
XPZ 710
XPZ 722
XPZ 737
XPZ 750
XPZ 762
XPZ 772
XPZ 775
XPZ 780
XPZ 787
XPZ 800
XPZ 807
XPZ 812
XPZ 825
XPZ 837
XPZ 850
XPZ 860
XPZ 862
XPZ 875
XPZ 887
XPZ 892
XPZ 900
XPZ 912
XPZ 917
XPZ 925
XPZ 937
XPZ 940
XPZ 950
XPZ 962
XPZ 987
XPZ 1000
XPZ 1010
XPZ 1012
XPZ 1024
XPZ 1030
XPZ 1034
Belt Length Factor (mm)
Lp to La
13
10 mm
Li to Lp
37
612
630
637
662
670
687
710
722
737
750
762
772
775
780
787
800
807
812
825
837
850
860
862
875
887
892
900
912
917
925
937
940
950
962
987
1000
1010
1012
1024
1030
1034
Manufacturing Range
600 - 5080 mm
Weight per metre (Kgs)
0.069
Dimensions
Angle Rec. Min
Minimum Order Qty.
(No. of V-Belts)
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
36
40
10
8
54 dp (mm)
XPZ
Nominal Length : Pitch length Lp in mm
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
Section
8 mm
XPZ Section
XPZ / 10x8
Datum/Pitch
Length
(mm)
Li to La
50
XPZ / 10x8
Datum/Pitch
Length
(mm)
Belt
Reference
XPZ 1037
XPZ 1060
XPZ 1077
XPZ 1080
XPZ 1087
XPZ 1112
XPZ 1120
XPZ 1137
XPZ 1140
XPZ 1150
XPZ 1162
XPZ 1180
XPZ 1187
XPZ 1200
XPZ 1202
XPZ 1212
XPZ 1217
XPZ 1220
XPZ 1225
XPZ 1237
XPZ 1250
XPZ 1262
XPZ 1270
XPZ 1280
XPZ 1287
XPZ 1300
XPZ 1312
XPZ 1320
XPZ 1337
XPZ 1340
XPZ 1347
XPZ 1362
XPZ 1387
XPZ 1400
XPZ 1412
XPZ 1420
XPZ 1437
XPZ 1450
XPZ 1462
XPZ 1470
XPZ 1487
1037
1060
1077
1080
1087
1112
1120
1137
1140
1150
1162
1180
1187
1200
1202
1212
1217
1220
1225
1237
1250
1262
1270
1280
1287
1300
1312
1320
1337
1340
1347
1362
1387
1400
1412
1420
1437
1450
1462
1470
1487
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
18
Belt
Reference
XPZ 1500
XPZ 1512
XPZ 1520
XPZ 1537
XPZ 1548
XPZ 1550
XPZ 1557
XPZ 1562
XPZ 1587
XPZ 1600
XPZ 1612
XPZ 1637
XPZ 1662
XPZ 1700
XPZ 1750
XPZ 1762
XPZ 1800
XPZ 1850
XPZ 1900
XPZ 1950
XPZ 2000
XPZ 2030
XPZ 2120
XPZ 2160
XPZ 2240
XPZ 2280
XPZ 2360
XPZ 2410
XPZ 2500
XPZ 2540
XPZ 2650
XPZ 2690
XPZ 2800
XPZ 2840
XPZ 3000
XPZ 3150
XPZ 3170
XPZ 3350
XPZ 3550
Datum/Pitch
Length
(mm)
1500
1512
1520
1537
1548
1550
1557
1562
1587
1600
1612
1637
1662
1700
1750
1762
1800
1850
1900
1950
2000
2030
2120
2160
2240
2280
2360
2410
2500
2540
2650
2690
2800
2840
3000
3150
3170
3350
3550
WEDGE SECTION : XPA
PIX ‘X’ tra : Cut Edge V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
• ATEX certified FRAS belts are available
XPA / 13x10
Belt
Reference
Datum/Pitch
Length
(mm)
XPA 630
XPA 690
XPA 732
XPA 750
XPA 757
XPA 775
XPA 782
XPA 800
XPA 807
XPA 832
XPA 850
XPA 857
XPA 875
XPA 882
XPA 900
XPA 907
XPA 925
XPA 932
XPA 950
XPA 957
XPA 975
XPA 982
XPA 1000
XPA 1007
XPA 1030
XPA 1060
XPA 1070
XPA 1082
XPA 1090
XPA 1107
XPA 1120
XPA 1132
XPA 1142
XPA 1150
630
690
732
750
757
775
782
800
807
832
850
857
875
882
900
907
925
932
950
957
975
982
1000
1007
1030
1060
1070
1082
1090
1107
1120
1132
1142
1150
Belt Length Factor (mm)
13 mm
Lp to La
18
10 mm
XPA Section
Li to Lp
45
Li to La
63
Manufacturing Range
600 - 5080 mm
Weight per metre (Kgs)
0.112
Dimensions
Angle Rec. Min
Minimum Order Qty.
(No. of V-Belts)
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
36
13
10
80 dp (mm)
XPA
30
Nominal Length : Pitch length Lp in mm
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
Section
XPA / 13x10
XPA / 13x10
Belt
Reference
Datum/Pitch
Length
(mm)
Belt
Reference
Datum/Pitch
Length
(mm)
XPA 1157
XPA 1172
XPA 1180
XPA 1207
XPA 1220
XPA 1232
XPA 1250
XPA 1257
XPA 1272
XPA 1282
XPA 1307
XPA 1320
XPA 1332
XPA 1357
XPA 1382
XPA 1400
XPA 1432
XPA 1450
XPA 1457
XPA 1482
XPA 1490
XPA 1500
XPA 1507
XPA 1522
XPA 1532
XPA 1550
XPA 1557
XPA 1582
XPA 1600
XPA 1607
XPA 1632
XPA 1657
XPA 1682
XPA 1700
1157
1172
1180
1207
1220
1232
1250
1257
1272
1282
1307
1320
1332
1357
1382
1400
1432
1450
1457
1482
1490
1500
1507
1522
1532
1550
1557
1582
1600
1607
1632
1657
1682
1700
XPA 1732
XPA 1750
XPA 1757
XPA 1782
XPA 1800
XPA 1850
XPA 1857
XPA 1882
XPA 1900
XPA 1932
XPA 1950
XPA 1957
XPA 1982
XPA 2000
XPA 2032
XPA 2057
XPA 2060
XPA 2082
XPA 2120
XPA 2180
XPA 2240
XPA 2282
XPA 2360
XPA 2432
XPA 2500
XPA 2650
XPA 2682
XPA 2800
XPA 2840
XPA 2882
XPA 3000
XPA 3150
XPA 3350
XPA 3550
1732
1750
1757
1782
1800
1850
1857
1882
1900
1932
1950
1957
1982
2000
2032
2057
2060
2082
2120
2180
2240
2282
2360
2432
2500
2650
2682
2800
2840
2882
3000
3150
3350
3550
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
19
WEDGE SECTION : XPB
PIX ‘X’ tra : Cut Edge V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
• ATEX certified FRAS belts are available
XPB / 17x14
17 mm
Belt Length Factor (mm)
Lp to La
28
14 mm
Section
XPB
Li to Lp
60
Li to La
88
Manufacturing Range
600 - 5080 mm
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
36 128 dp (mm)
17
14
Weight per metre (Kgs)
0.194
Minimum Order Qty.
(No. of V-Belts)
25
Nominal Length : Pitch length Lp in mm
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
XPB Section
XPB / 17x14
XPB / 17x14
Belt
Reference
Datum/Pitch
Length
(mm)
Belt
Reference
Datum/Pitch
Length
(mm)
XPB 1000
XPB 1060
XPB 1120
XPB 1180
XPB 1250
XPB 1260
XPB 1320
XPB 1340
XPB 1400
XPB 1410
XPB 1450
XPB 1480
XPB 1500
XPB 1510
XPB 1525
XPB 1590
1000
1060
1120
1180
1250
1260
1320
1340
1400
1410
1450
1480
1500
1510
1525
1590
XPB 1600
XPB 1620
XPB 1650
XPB 1690
XPB 1700
XPB 1750
XPB 1800
XPB 1850
XPB 1900
XPB 2000
XPB 2020
XPB 2120
XPB 2150
XPB 2180
XPB 2240
XPB 2280
1600
1620
1650
1690
1700
1750
1800
1850
1900
2000
2020
2120
2150
2180
2240
2280
Belt
Reference
Datum/Pitch
Length
(mm)
XPB 2360
XPB 2410
XPB 2500
XPB 2530
XPB 2650
XPB 2680
XPB 2800
XPB 2840
XPB 2990
XPB 3000
XPB 3150
XPB 3170
XPB 3340
XPB 3350
XPB 3550
2360
2410
2500
2530
2650
2680
2800
2840
2990
3000
3150
3170
3340
3350
3550
WEDGE SECTION : XPC
PIX ‘X’ tra : Cut Edge V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
• ATEX certified FRAS belts are available
XPC / 22x18
22 mm
Belt Length Factor (mm)
Lp to La
30
18 mm
Section
XPC
Li to Lp
83
Li to La
113
Manufacturing Range
600 - 5080 mm
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
36 180 dp (mm)
18
22
Weight per metre (Kgs)
0.332
Minimum Order Qty.
(No. of V-Belts)
20
Nominal Length : Pitch length Lp in mm
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
XPC Section
XPC / 22x18
Belt
Reference
Datum/Pitch
Length
(mm)
Belt
Reference
Datum/Pitch
Length
(mm)
XPC 2000
XPC 2120
XPC 2240
XPC 2360
2000
2120
2240
2360
XPC 2500
XPC 2650
XPC 2800
XPC 3000
2500
2650
2800
3000
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
20
XPC / 22x18
Belt
Reference
Datum/Pitch
Length
(mm)
XPC 3150
XPC 3350
XPC 3550
3150
3350
3550
HIGH CAPACITY NARROW V-BELTS : 3VX
PIX ‘X’ tra : Cut Edge V-Belts
Standard : RMA IP 22, DIN 2215
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
Belt
Reference
3VX 250
3VX 260
3VX 265
3VX 280
3VX 300
3VX 315
3VX 335
3VX 350
3VX 355
3VX 370
3VX 375
3VX 400
3VX 425
3VX 450
635
660
673
711
762
800
851
889
902
940
953
1016
1080
1143
Lp to La
13
8 mm
3VX Section
3VX / 9.7x8
Outside
Length
(mm)
Belt Length Factor (mm)
9.7 mm
Li to Lp
37
Li to La
50
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
9.7
36
8
3VX
55 de (mm)
Nominal Length : Belt no /10 = outside length in inches
Section
3VX / 9.7x8
3VX 475
3VX 500
3VX 520
3VX 530
3VX 560
3VX 600
3VX 617
3VX 630
3VX 670
3VX 710
3VX 750
3VX 800
3VX 850
3VX 900
Weight per metre (Kgs)
0.069
Minimum Order Qty.
(No. of V-Belts)
40
3VX / 9.7x8
Outside
Length
(mm)
Belt
Reference
Manufacturing Range
24 - 200 inches
1207
1270
1321
1346
1422
1524
1567
1600
1702
1803
1905
2032
2159
2286
Belt
Reference
Outside
Length
(mm)
3VX 950
3VX 960
3VX 1000
3VX 1060
3VX 1120
3VX 1180
3VX 1250
3VX 1320
3VX 1400
3VX 1425
3VX 1450
3VX 1500
2413
2438
2540
2692
2845
2997
3175
3353
3556
3620
3683
3810
HIGH CAPACITY NARROW V-BELTS : 5VX
PIX ‘X’ tra : Cut Edge V-Belts
Standard : RMA IP 22, DIN 2215
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Maximum belt linear speed : 50 m/sec
• Available in Raw Edge Plain/Cogged Const.
5VX / 16x14
Belt
Reference
5VX 500
5VX 530
5VX 560
5VX 600
5VX 630
5VX 670
5VX 710
5VX 750
16 mm
Belt Length Factor (mm)
Lp to La
25
14 mm
5VX Section
Li to Lp
60
Manufacturing Range
24 - 200 inches
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
36 112 de (mm)
5VX
16
14
Nominal Length : Belt no /10 = Outside length in inches
Section
5VX / 16x14
Outside
Length
(mm)
Belt
Reference
Outside
Length
(mm)
1270
1346
1422
1524
1600
1702
1803
1905
5VX 800
5VX 850
5VX 900
5VX 950
5VX 1000
5VX 1060
5VX 1120
5VX 1180
2032
2159
2286
2413
2540
2692
2845
2997
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
21
Li to La
85
Weight per metre (Kgs)
0.186
Minimum Order Qty.
(No. of V-Belts)
25
5VX / 16x14
Belt
Reference
Outside
Length
(mm)
5VX 1250
5VX 1320
5VX 1400
5VX 1500
5VX 1600
5VX 1650
3175
3353
3556
3810
4064
4191
RIBBED / POLY V-BELTS : PH
PIX ‘X’ Power
Standard : RMA IP 26
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Can be used for speed ratios up to 1:30
• Maximum belt speed up to 60 m/sec
• ATEX certified FRAS belts are available
• No of Ribs per Sleeve : 280
H / PH
Belt
Reference
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
22
27.5
28.9
30
32
33.8
34
34.9
36
37.5
38
38.4
Max.
Rec. Min Minimum Order Qty.
Dimensions
Belt Speed Pulley Dia.
(No. of Sleeves)
RibPitch(mm) Thickness(mm) m/sec
13 de (mm)
1
PH
2.9
1.6
60
Nominal Length : Effective length Le
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
PH Section
Belt
Reference
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
Weight per metre (Kgs)
0.006
Section
2.9 mm
H / PH
Effective
Length
(inches)
559
698
735
762
813
858
864
886
914
955
965
975
Manufacturing Range
280 - 5080 mm
1.6 mm
H / PH
Effective
Length
(inches)
990
1016
1080
1092
1096
1168
1194
1200
1222
1230
1244
1262
Belt
Reference
39
40
42.5
43
43.1
46
47
47.2
48.1
48.4
49
49.7
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
PH
H / PH
Effective
Length
(inches)
50
50.6
50.8
51.2
51.5
51.8
52
52.5
54
55
56.7
58.1
1270
1285
1290
1301
1309
1316
1321
1333
1371
1397
1439
1475
Belt
Reference
PH
PH
PH
PH
PH
PH
PH
PH
PH
Effective
Length
(inches)
1600
1854
1895
1915
1930
1956
1992
2083
2155
63
73
74.6
75.4
76
77
78.4
82
84.8
RIBBED / POLY V-BELTS : PJ
PIX ‘X’ Power
Standard : RMA IP 26
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Can be used for speed ratios up to 1:30
• Maximum belt speed up to 60 m/sec
• ATEX certified FRAS belts are available
• No of Ribs per Sleeve : 200
J / PJ
Belt
Reference
PJ 280
PJ 330
PJ 356
PJ 362
PJ 381
PJ 406
PJ 414
PJ 432
PJ 457
PJ 483
PJ 508
PJ 559
PJ 584
PJ 610
PJ 640
PJ 660
PJ 711
PJ 723
PJ 762
PJ 813
PJ 836
PJ 838
PJ 864
PJ 889
Manufacturing Range
280 - 5080 mm
2.34 mm
Max.
Dimensions
Rec. Min Minimum Order Qty.
Belt Speed Pulley Dia.
(No. of Sleeves)
m/sec
RibPitch(mm) Thickness(mm)
PJ
60
2.34
3.8
20 de (mm)
1
Nominal Length : Effective length Le
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
Section
3.8 mm
PJ Section
J / PJ
Effective
Length
(inches)
11.0
13.0
14.0
14.3
15.0
16.0
16.3
17.0
18.0
19.0
20.0
22.0
23.0
24.0
25.2
26.0
28.0
28.5
30.0
32.0
32.9
33.0
34.0
35.0
Weight per metre (Kgs)
0.011
J / PJ
Belt
Reference
Effective
Length
(inches)
PJ 914
PJ 955
PJ 965
PJ 1016
PJ 1031
PJ 1054
PJ 1065
PJ 1092
PJ 1105
PJ 1110
PJ 1116
PJ 1123
PJ 1130
PJ 1143
PJ 1150
PJ 1168
PJ 1194
PJ 1200
PJ 1219
PJ 1222
PJ 1244
PJ 1245
PJ 1254
PJ 1262
36.0
37.6
38.0
40.0
40.6
41.5
41.9
43.0
43.5
43.7
43.9
44.2
44.5
45.0
45.3
46.0
47.0
47.2
48.0
48.1
49.0
49.0
49.4
49.7
Belt
Reference
Belt
Reference
Effective
Length
(inches)
PJ 1270
PJ 1280
PJ 1285
PJ 1301
PJ 1309
PJ 1316
PJ 1321
PJ 1333
PJ 1355
PJ 1358
PJ 1371
PJ 1372
PJ 1397
PJ 1428
PJ 1435
PJ 1439
PJ 1473
PJ 1475
PJ 1549
PJ 1580
PJ 1600
PJ 1651
PJ 1663
PJ 1702
50.0
50.4
50.6
51.2
51.5
51.8
52.0
52.5
53.3
53.5
54.0
54.0
55.0
56.2
56.5
56.7
58.0
58.1
61.0
62.2
63.0
65.0
65.5
67.0
PJ 1752
PJ 1753
PJ 1778
PJ 1780
PJ 1795
PJ 1854
PJ 1880
PJ 1895
PJ 1905
PJ 1910
PJ 1915
PJ 1920
PJ 1930
PJ 1956
PJ 1965
PJ 1981
PJ 1992
PJ 2083
PJ 2100
PJ 2155
PJ 2210
PJ 2337
PJ 2489
PJ 2500
69.0
69.0
70.0
70.1
70.7
73.0
74.0
74.6
75.0
75.2
75.4
75.6
76.0
77.0
77.4
78.0
78.4
82.0
82.7
84.8
87.0
92.0
98.0
98.4
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
22
J / PJ
Effective
Length
(inches)
RIBBED / POLY V-BELTS : PK
PIX ‘X’ Power
Standard : RMA IP 26
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Can be used for speed ratios up to 1:30
• Maximum belt speed up to 55 m/sec
• ATEX certified FRAS belts are available
• No of Ribs per Sleeve : 125
K / PK
Belt
Reference
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
559
605
625
630
648
698
725
735
775
780
790
795
800
805
812
825
830
835
841
845
858
865
870
875
886
890
Manufacturing Range
280 - 5080 mm
3.56 mm
Max.
Dimensions
Rec. Min Minimum Order Qty.
Belt Speed Pulley Dia.
(No. of Sleeves)
m/sec
RibPitch(mm) Thickness(mm)
55
3.56
5.8
40 de (mm)
1
PK
Nominal Length : Effective length Le
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
Section
5.8 mm
PK Section
K / PK
Effective
Length
(inches)
22
23.8
24.6
24.8
25.5
27.5
28.5
28.9
30.5
30.7
31.1
31.3
31.5
31.7
32
32.5
32.7
32.9
33.1
33.3
33.8
34
34.3
34.5
34.9
35
Belt
Reference
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
Weight per metre (Kgs)
0.018
905
913
920
925
930
935
940
945
954
962
970
975
985
991
995
1000
1010
1015
1020
1065
1080
1090
1100
1125
1150
1165
K / PK
Effective
Length
(inches)
Belt
Reference
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
35.6
36
36.2
36.4
36.6
36.8
37
37.2
37.6
37.8
38.2
38.4
38.8
39
39.2
39.4
39.8
40
40.2
41.9
42.5
43
43.3
44.3
45.3
45.9
1180
1190
1200
1214
1222
1230
1245
1262
1270
1285
1301
1309
1321
1330
1345
1371
1397
1439
1450
1460
1475
1520
1600
1610
1655
1854
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
23
K / PK
Effective
Length
(inches)
46.5
46.8
47.2
47.8
48.1
48.4
49
49.7
50
50.6
51.2
51.5
52
52.4
53
54
55
56.7
57.1
57.5
58.1
59.8
63
63.4
65.2
73
Belt
Reference
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
PK
1895
1930
1956
1980
1992
2030
2050
2145
2155
2170
2235
2362
2461
2515
2743
2845
2895
2921
2997
3124
3327
3492
3696
4051
4191
Effective
Length
(inches)
74.6
76
77
78
78.4
79.9
80.7
84.4
84.8
85.4
88
93
96.9
99
108
112
114
115
118
123
131
137.5
145.5
159.5
165
RIBBED / POLY V-BELTS : PL
PIX ‘X’ Power
Standard : RMA IP 26
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Can be used for speed ratios up to 1:30
• Maximum belt speed up to 50 m/sec
• ATEX certified FRAS belts are available
• No of Ribs per Sleeve : 95
L /PL
Belt
Reference
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
Manufacturing Range
280 - 5080 mm
4.7 mm
Max.
Dimensions
Rec. Min Minimum Order Qty.
Belt Speed Pulley Dia.
(No. of Sleeves)
m/sec
RibPitch(mm) Thickness(mm)
PL
50
7.6
75 de (mm)
4.7
1
Nominal Length : Effective length Le
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
Section
7.6 mm
PL Section
L /PL
Effective
Length
(inches)
954
991
945
955
960
970
975
986
991
996
1001
1011
1016
1021
1041
1064
1075
1080
1092
1100
1125
1149
1151
1166
1168
1181
1189
1194
1199
1214
37.6
39.0
37.2
37.6
37.8
38.2
38.4
38.8
39.0
39.2
39.4
39.8
40.0
40.2
41.0
41.9
42.3
42.5
43.0
43.3
44.3
45.2
45.3
45.9
46.0
46.5
46.8
47.0
47.2
47.8
Belt
Reference
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
Weight per metre (Kgs)
0.038
L /PL
Effective
Length
(inches)
1219
1222
1229
1245
1262
1270
1285
1295
1300
1308
1321
1333
1334
1346
1371
1397
1422
1435
1440
1450
1460
1462
1473
1476
1499
1519
1562
1600
1613
1651
Belt
Reference
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
48.0
48.1
48.4
49.0
49.7
50.0
50.6
51.0
51.2
51.5
52.0
52.5
52.5
53.0
54.0
55.0
56.0
56.5
56.7
57.1
57.5
57.6
58.0
58.1
59.0
59.8
61.5
63.0
63.5
65.0
L /PL
Effective
Length
(inches)
1656
1664
1715
1727
1764
1765
1803
1841
1842
1854
1895
1930
1943
1956
1981
1991
2019
2020
2029
2050
2070
2096
2134
2144
2154
2169
2197
2235
2324
2362
65.2
65.5
67.5
68.0
69.4
69.5
71.0
72.5
72.5
73.0
74.6
76.0
76.5
77.0
78.0
78.4
79.5
79.5
79.9
80.7
81.5
82.5
84.0
84.4
84.8
85.4
86.5
88.0
91.5
93.0
Belt
Reference
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
PL
Effective
Length
(inches)
96.9
97.5
99.0
101.0
106.5
108.0
112.0
113.8
114.0
115.0
118.0
121.5
123.0
129.4
129.5
131.0
137.5
145.5
159.5
165.0
167.3
176.0
182.0
198.0
200.0
212.0
240.0
2461
2476
2515
2565
2705
2743
2845
2890
2895
2921
2997
3086
3124
3288
3289
3327
3492
3696
4051
4191
4250
4470
4622
5029
5080
5385
6096
RIBBED / POLY V-BELTS : PM
PIX ‘X’ Power
Standard : RMA IP 26
Features :
• Oil resistant
• Temperature range : -300C to +900C
• Can be used for speed ratios up to 1:30
• Maximum belt speed up to 40 m/sec
• ATEX certified FRAS belts are available
• No of Ribs per Sleeve : 45
M / PM
Belt
Reference
PM
PM
PM
PM
PM
PM
PM
2286
2362
2388
2461
2515
2693
2743
Manufacturing Range
280 - 5080 mm
9.4 mm
13.3 mm
PM Section
Max.
Dimensions
Rec. Min Minimum Order Qty.
Belt Speed Pulley Dia.
(No. of Sleeves)
m/sec
RibPitch(mm) Thickness(mm)
9.4
40
13.3
180 de (mm)
1
PM
Nominal Length : Effective length Le
‘PIX’ FRAS belts conforms to :
II 2GD c IIB X (Test report no. IB-03-4-934)
Section
M / PM
Effective
Length
(inches)
90
93
94
96.9
99
106
108
Belt
Reference
PM
PM
PM
PM
PM
PM
PM
2832
2845
2896
2921
2997
3010
3124
Weight per metre (Kgs)
0.151
M / PM
Effective
Length
(inches)
Belt
Reference
111.5
112
114
115
118
118.5
123
PM
PM
PM
PM
PM
PM
PM
3327
3493
3531
3696
3734
4051
4089
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
24
Effective
Length
(inches)
131
137.5
139
145.5
147
159.5
161
M / PM
Belt
Reference
Effective
Length
(inches)
PM
PM
PM
PM
PM
PM
165
176
182
183
198
200
4191
4470
4623
4648
5029
5080
VARIABLE SPEED BELTS
PIX ‘X’ tra : Cut Edge V-Belts
Standard (REC Belts) : RMA IP 25, ISO 3410, BS 3733
Features :
• Oil resistant
• Antistatic
• Available also in Polyester/Aramid (Kevlar) cord construction
• Fabric top surface : To impart superior flexibility
• Fibre filled compound : To impart extra rigidity in transverse direction
• Tension Cord : Ability to transmit extremely high forces
• Special Fabric at Bottom : To get extra flexibility on small diameter pulleys
• Cushion Rubber Compound : To ensure best possible bond
• Base Compound : For high wear resistance and good support to tension cord
• Variable Speed Belts in Wrapped Construction also available
Belt
Reference
Datum/Pitch
Length
(mm)
VS 13 X 5
VS 13 X 5
VS 13 X 5
VS 13 X 5
VS 13 X 5
VS 13 X 5
VS 13 X 5
VS 13 X 5
VS 13 X 5
468
500
600
700
750
850
900
1000
1180
VS 17 X 5
VS 17 X 5
VS 17 X 5
VS 17 X 5
VS 17 X 5
VS 17 X 5
VS 17 X 5
VS 17 X 5
VS 17 X 5
426
476
536
570
606
686
776
875
976
VS 20 X 10
VS 20 X 10
VS 20 X 10
VS 20 X 10
VS 20 X 10
VS 20 X 10
600
700
800
900
1000
1500
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
VS 21 X 6
530
550
600
610
675
700
750
770
800
850
870
900
970
1120
1180
1220
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
485
525
565
650
700
750
800
830
850
Belt
Reference
Datum/Pitch
Length
(mm)
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
VS 22 X 8
880
900
950
1000
1060
1150
1185
1250
1320
1400
1500
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
VS 26 X 8
525
630
655
672
680
710
750
762
780
800
850
862
900
950
962
1000
1082
1212
1562
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
VS 28 X 8
600
650
670
700
750
800
850
900
950
1000
1060
1120
1180
1250
1320
1400
1450
1500
VS 30 X 10
VS 30 X 10
650
665
Belt
Reference
y
Manufacturing Range (Li)
600 - 5000 mm
Datum/Pitch
Length
(mm)
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
VS 30 X 10
700
773
800
850
875
900
925
950
1000
1015
1035
1050
1100
1120
1185
1200
1320
1340
1500
1600
1700
1750
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
VS 32 X 10
750
790
820
850
900
950
1000
1073
1120
1180
1200
1250
1353
1400
1600
VS 35 X 12
VS 35 X 12
VS 35 X 12
VS 35 X 12
VS 35 X 12
VS 35 X 12
VS 35 X 12
VS 35 X 12
VS 35 X 12
VS 35 X 12
VS 35 X 12
800
850
900
950
1000
1050
1100
1180
1250
1400
1500
VS 37 X 10
VS 37 X 10
660
800
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
25
x
Dimensions
Topwidth(mm) Thickness(mm)
(x)
(y)
23
8
28
8
32
10
38
10
46
13
50
14
64
18
70
18
76
19
90
22
Belt
Reference
Datum/Pitch
Length
(mm)
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
VS 37 X 10
850
900
920
950
1000
1020
1060
1120
1180
1250
1320
1400
1500
1600
1700
1800
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
VS 41 X 13
900
925
950
970
1000
1040
1060
1120
1180
1190
1250
1340
1400
1440
1500
1600
1740
1940
2180
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
VS 47 X 13
960
1000
1060
1120
1180
1250
1320
1400
1500
1600
1700
1740
1790
1800
BANDED BELTS : HA
Wrapped V-Belts
Standard : ISO 5291
13 mm
Li
(mm)
La
(mm)
HA 47
HA 51
HA 56
HA 57
HA 59
HA 64
HA 67
1194
1295
1422
1448
1499
1626
1702
1244
1345
1472
1498
1549
1676
1752
Section
HA
Weight per metre (Kgs)
0.175
Dimensions
TopWidth(mm) Thickness(mm)
13
10
HA / 13x10
La
(inches)
49
53
58
59
61
66
69
Angle
Degree
40
Rec. Min Minimum Order Qty.
Pulley Dia.
(No. of Ribs)
80 mm (de)
Refer Page no. 62
Section : HA
HA / 13x10
Belt
Ref.
Manufacturing Range
838 - 7112 mm (Li)
10 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Recommended number of Ribs = 5 (Max)
HA / 13x10
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
HA 71
HA 75
HA 79
HA 98
HA 100
HA 104
HA 112
1803
1905
2007
2489
2540
2642
2845
1853
1955
2057
2539
2590
2692
2895
73
77
81
100
102
106
114
HA 120
HA 128
HA 144
HA 157
HA 167
HA 187
3048
3251
3658
3988
4242
4750
3098
3301
3708
4038
4292
4800
122
130
146
159
169
189
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
BANDED BELTS : HB
Wrapped V-Belts
Standard : ISO 5291
17 mm
13 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Recommended number of Ribs = 5 (Max)
Manufacturing Range
1041 - 9525 mm (Li)
Section
HB
Weight per metre (Kgs)
0.272
Dimensions
TopWidth(mm) Thickness(mm)
13
17
Angle
Degree
40
Rec. Min Minimum Order Qty.
Pulley Dia.
(No. of Ribs)
130 mm (de)
Refer Page no. 62
Section : HB
HB / 17x13
HB / 17x13
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
Belt
Ref.
Li
(mm)
HB 47
HB 51
HB 55
HB 59
HB 61
HB 63
HB 64
HB 67
HB 71
HB 73
HB 75
HB 79
1194
1295
1397
1499
1549
1600
1626
1702
1803
1854
1905
2007
1263
1364
1466
1568
1618
1669
1695
1771
1872
1923
1974
2076
50
54
58
62
64
66
67
70
74
76
78
82
HB 83
HB 88
HB 91
HB 94.5
HB 98
HB 102
HB 106
HB 112
HB 118
HB 120
HB 128
HB 132
2108
2235
2311
2400
2489
2591
2692
2845
2997
3048
3251
3353
HB / 17x13
La
(mm)
La
(inches)
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
2177
2304
2380
2469
2558
2660
2761
2914
3066
3117
3320
3422
86
91
94
97
101
105
109
115
121
123
131
135
HB 140
HB 146
HB 148
HB 158
HB 167
HB 177
HB 187
HB 197
HB 208
HB 220
3556
3708
3759
4013
4242
4496
4750
5004
5283
5588
3625
3777
3828
4082
4311
4565
4819
5073
5352
5657
143
149
151
161
170
180
190
200
211
223
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
• Prices on request • Non standard stock items are available on request • Std. Designation for Banded belts : Refer page no. 61
26
BANDED BELTS : HC
Wrapped V-Belts
Standard : ISO 5291
22 mm
16 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Recommended number of Ribs = 5 (Max)
Manufacturing Range
1168 -16713 mm (Li)
Section
HC
Weight per metre (Kgs)
0.431
Dimensions
TopWidth(mm) Thickness(mm)
16
22
Angle
Degree
40
Rec. Min Minimum Order Qty.
Pulley Dia.
(No. of Ribs)
210 mm (de)
Refer Page no. 62
Section : HC
HC / 22x16
HC / 22x16
HC / 22x16
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
HC 90
HC 98
HC 108
HC 120
HC 128
HC 140
2286
2489
2743
3048
3251
3556
2374
2577
2831
3136
3339
3644
93
101
111
123
131
143
HC 146
HC 151
HC 167
HC 177
HC 187
HC 197
4242
4496
4750
5004
5283
5588
3796
3923
4330
4584
4838
5092
149
154
170
180
190
200
HC 208
HC 220
HC 236
HC 248
5994
6299
3708
3835
5371
5676
6082
6387
211
223
239
251
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
BANDED BELTS : HD
Wrapped V-Belts
Standard : ISO 5291
32 mm
21.5 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Recommended number of Ribs = 5 (Max)
Manufacturing Range
2286 -16713 mm (Li)
Section
HD
HD / 32x21.5
Weight per metre (Kgs)
0.835
Dimensions
TopWidth(mm) Thickness(mm)
32
21.5
HD / 32x21.5
Angle
Degree
40
Rec. Min Minimum Order Qty.
Pulley Dia.
(No. of Ribs)
370 mm (de)
Refer Page no. 62
HD / 32x21.5
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
Belt
Ref.
Li
(mm)
La
(mm)
La
(inches)
HD 90
HD 110
HD 120
HD 128
HD 144
HD 158
HD 162
HD 173
2286
2794
3048
3251
3658
4013
4115
4394
2405
2913
3167
3370
3777
4132
4234
4513
95
115
125
133
149
163
167
178
HD 180
HD 195
HD 210
HD 225
HD 240
HD 255
HD 270
HD 285
4572
4953
5334
5715
6096
6477
6858
7239
4691
5072
5453
5834
6215
6596
6977
7358
185
200
215
230
245
260
275
290
HD 300
HD 315
HD 330
HD 345
HD 360
HD 390
7620
8001
8382
8763
9144
9906
7739
8120
8501
8882
9263
10025
305
320
335
350
365
395
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
• Prices on request • Non standard stock items are available on request • Std. Designation for Banded belts : Refer page no. 61
27
BANDED BELTS : HSPB
Wrapped V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt speed up to 42 m/sec
• Recommended number of Ribs = 5 (Max)
HSPB / 17x16
17 mm
Manufacturing Range
1778 - 10058 mm (Lp)
16 mm
Weight per metre (Kgs)
0.275
Section
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
HSPB
40
16
160 dp(mm)
17
Minimum Order Qty.
Ref. Page no. 62
Section : HSPB
HSPB / 17x16
HSPB / 17x16
Belt
Reference
Lp
(mm)
Belt
Reference
Lp
(mm)
Belt
Reference
Lp
(mm)
HSPB 2000
HSPB 2120
HSPB 2240
HSPB 2360
HSPB 2500
HSPB 2650
HSPB 2800
HSPB 3000
HSPB 3150
2000
2120
2240
2360
2500
2650
2800
3000
3150
HSPB 3350
HSPB 3550
HSPB 3750
HSPB 4000
HSPB 4250
HSPB 4500
HSPB 4750
HSPB 5000
HSPB 5300
3350
3550
3750
4000
4250
4500
4750
5000
5300
HSPB 5600
HSPB 6000
HSPB 6300
HSPB 6700
HSPB 7100
HSPB 7500
HSPB 8000
5600
6000
6300
6700
7100
7500
8000
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
BANDED BELTS : HSPC
Wrapped V-Belts
Standard : BS 3790
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt speed up to 42 m/sec
• Recommended number of Ribs = 5 (Max)
22 mm
Manufacturing Range
2235 - 16688 mm (Lp)
20 mm
Section
HSPC
Weight per metre (Kgs)
0.485
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40
20
224 dp(mm)
22
Minimum Order Qty.
Ref. Page No. 62
Section : HSPC
HSPC / 22x20
HSPC / 22x20
HSPC / 22x20
Belt
Reference
Lp
(mm)
Belt
Reference
Lp
(mm)
Belt
Reference
Lp
(mm)
HSPC 3000
HSPC 3150
HSPC 3350
HSPC 3550
HSPC 3750
HSPC 4000
HSPC 4250
HSPC 4500
HSPC 4750
3000
3150
3350
3550
3750
4000
4250
4500
4750
HSPC 5000
HSPC 5300
HSPC 5600
HSPC 6000
HSPC 6300
HSPC 6700
HSPC 7100
HSPC 7500
HSPC 8000
5000
5300
5600
6000
6300
6700
7100
7500
8000
HSPC 8500
HSPC 9000
HSPC 9500
HSPC 10000
HSPC 10600
HSPC 11200
HSPC 11800
HSPC 12500
8500
9000
9500
10000
10600
11200
11800
12500
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
• Prices on request • Non standard stock items are available on request • Std. Designation for Banded belts : Refer page no. 61
28
BANDED BELTS : H3V
Wrapped V-Belts
Standard : ISO 5290
9.7 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt speed up to 42 m/sec
• Recommended number of Ribs = 5 (Max)
H3V / 9.7x10
Belt
Reference
H3V 500
H3V 530
H3V 560
H3V 600
H3V 630
9J
9J
9J
9J
9J
La
(mm)
1270
1346
1422
1524
1600
Manufacturing Range
711 - 4521 mm (La)
10 mm
Section
H3V
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
9.7
40
10
67 mm (de)
Minimum Order Qty.
Ref. Page no. 62
Section : H3V
H3V / 9.7x10
Belt
Reference
H3V 670
H3V 710
H3V 750
H3V 800
H3V 850
Weight per metre (Kgs)
0.106
9J
9J
9J
9J
9J
H3V / 9.7x10
La
(mm)
Belt
Reference
1702
1803
1905
2032
2159
H3V 900
H3V 950
H3V 1000
H3V 1060
H3V 1120
H3V / 9.7x10
La
(mm)
9J
9J
9J
9J
9J
Belt
Reference
H3V 1180
H3V 1250
H3V 1320
H3V 1400
2286
2413
2540
2692
2845
9J
9J
9J
9J
La
(mm)
2997
3175
3353
3556
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
BANDED BELTS : H5V
Wrapped V-Belts
Standard : ISO 5290
15.8 mm
16 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt speed up to 42 m/sec
• Recommended number of Ribs = 5 (Max)
Manufacturing Range
Weight per metre (Kgs)
1219 - 9525 mm (La)
0.258
Section
H5V
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40 180 mm (de)
15.8
16
Minimum Order Qty.
Ref. Page no. 62
Section : H5V
H5V / 15.8x16
Belt
Reference
H5V 500
H5V 530
H5V 560
H5V 600
H5V 630
H5V 670
H5V 710
H5V 750
H5V 800
15J
15J
15J
15J
15J
15J
15J
15J
15J
La
(mm)
1270
1346
1422
1524
1600
1702
1803
1905
2032
H5V / 15.8x16
Belt
Reference
H5V 850
H5V 900
H5V 950
H5V 1000
H5V 1060
H5V 1120
H5V 1180
H5V 1250
H5V 1320
15J
15J
15J
15J
15J
15J
15J
15J
15J
H5V / 15.8x16
La
(mm)
Belt
Reference
2159
2286
2413
2540
2692
2845
2997
3175
3353
H5V 1400
H5V 1500
H5V 1600
H5V 1700
H5V 1800
H5V 1900
H5V 2000
H5V 2120
H5V 2240
La
(mm)
15J
15J
15J
15J
15J
15J
15J
15J
15J
3556
3810
4064
4318
4572
4826
5080
5385
5690
H5V / 15.8x16
Belt
Reference
H5V 2360
H5V 2500
H5V 2650
H5V 2800
H5V 3000
H5V 3150
H5V 3350
H5V 3550
15J
15J
15J
15J
15J
15J
15J
15J
La
(mm)
5994
6350
6731
7112
7620
8001
8509
9017
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
BANDED BELTS : H8V
Wrapped V-Belts
Standard : ISO 5290
25.4 mm
H8V / 25.4x25
Belt
Reference
H8V 1000
H8V 1060
H8V 1120
H8V 1180
H8V 1250
H8V 1320
H8V 1400
25J
25J
25J
25J
25J
25J
25J
La
(mm)
2540
2692
2845
2997
3175
3353
3556
25 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt speed up to 42 m/sec
• Recommended number of Ribs = 5 (Max)
Section
H8V
H8V / 25.4x25
Belt
Reference
H8V 2120
H8V 2240
H8V 2360
H8V 2500
H8V 2650
H8V 2800
H8V 3000
Manufacturing Range
2489 - 16866 mm (La)
25J
25J
25J
25J
25J
25J
25J
Weight per metre (Kgs)
0.669
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40 315 mm (de)
25.4
25
H8V / 25.4x25
La
(mm)
Belt
Reference
5385
5690
5994
6350
6731
7112
7620
H8V 3150
H8V 3350
H8V 3550
H8V 3750
H8V 4000
H8V 4250
H8V 4500
25J
25J
25J
25J
25J
25J
25J
La
(mm)
8000
8509
9017
9525
10160
10795
11430
• Banded belts in Moulded Raw Edge Cogged construction are available on request.
• Prices on request • Non standard stock items are available on request • Std. Designation for Banded belts : Refer page no. 61
29
Minimum Order Qty.
Ref. Page no. 62
H8V / 25.4x25
Belt
Reference
H8V 4750
H8V 5000
H8V 5250
H8V 5500
25J
25J
25J
25J
La
(mm)
12065
12700
13335
13970
CLASSICAL SECTION : AA
Hexagonal Wrapped V-Belts
Standard : ISO 5289
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
Manufacturing Range
1143 - 9525 mm (Li)
13 mm
10 mm
AA Section
Weight per metre (Kgs)
0.150
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40
13
10
75 mm (dp)
AA
Nominal Length (Inches) : Li/Le
Section
AA / 13x10
Minimum Order Qty.
36
Belt
Reference
Pitch
Length
(mm)
Li
(inches)
Belt
Reference
Pitch
Length
(mm)
Li
(inches)
Belt
Reference
Pitch
Length
(mm)
Li
(inches)
Belt
Reference
Pitch
Length
(mm)
Li
(inches)
AA 51
AA 53
AA 58
AA 60
AA 65
AA 66
AA 68
AA 70
AA 71
1331
1382
1509
1560
1687
1712
1763
1814
1839
51
53
58
60
65
66
68
70
71
AA 73
AA 75
AA 76
AA 77
AA 78
AA 80
AA 83
AA 85
AA 87
1890
1941
1966
1992
2017
2068
2144
2195
2246
73
75
76
77
78
80
83
85
87
AA 88
AA 90
AA 91
AA 95
AA 96
AA 102
AA 103
AA 105
AA 108
2271
2322
2347
2449
2474
2627
2652
2703
2779
88
90
91
95
96
102
103
105
108
AA 112
AA 120
AA 128
AA 146
AA 152
AA 180
AA 185
2881
3084
3287
3744
3897
4608
4735
112
120
128
146
152
180
185
CLASSICAL SECTION : BB
Hexagonal Wrapped V-Belts
Standard : ISO 5289
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
Belt
Reference
Pitch
Length
(mm)
BB 75
BB 81
BB 83
BB 85
BB 88
BB 90
BB 95
BB 97
BB 99
BB 101
BB 105
BB 108
1948
2100
2151
2202
2278
2329
2456
2507
2558
2608
2710
2786
Li
(inches)
75
81
83
85
88
90
95
97
99
101
105
108
17 mm
Manufacturing Range
1016 - 10414 mm (Li)
14 mm
BB Section
Belt
Reference
Pitch
Length
(mm)
BB 111
BB 112
BB 115
BB 116
BB 120
BB 121
BB 125
BB 126
BB 128
BB 131
BB 133
BB 135
2862
2888
2964
2989
3091
3116
3218
3243
3294
3370
3421
3472
Weight per metre (Kgs)
0.226
Section
BB / 17x14
Li
(inches)
111
112
115
116
120
121
125
126
128
131
133
135
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
BB
40 125 mm (dp)
17
14
Nominal Length (Inches) : Li
Belt
Reference
Pitch
Length
(mm)
BB 137
BB 141
BB 144
BB 145
BB 146
BB 154
BB 155
BB 156
BB 158
BB 162
BB 163
BB 173
3523
3624
3701
3726
3751
3955
3980
4005
4056
4158
4183
4437
Li
(inches)
137
141
144
145
146
154
155
156
158
162
163
173
Minimum Order Qty.
(No. of V-Belts)
27
Belt
Reference
Pitch
Length
(mm)
BB 174
BB 180
BB 184
BB 194
BB 195
BB 210
BB 240
BB 270
BB 300
BB 310
4463
4615
4717
4971
4996
5377
6139
6901
7663
7917
Li
(inches)
174
180
184
194
195
210
240
270
300
310
CLASSICAL SECTION : CC
Hexagonal Wrapped V-Belts
Standard : ISO 5289
22 mm
Features :
• Oil resistant
• Antistatic
• Temperature range : -180C to +700C
• Maximum belt linear speed : 30 m/sec
Manufacturing Range
1854 - 16713 mm (Li)
17 mm
CC Section
Weight per metre (Kgs)
0.386
Section
CC / 22x17
Dimensions
Angle Rec. Min
Degree Pulley Dia.
Topwidth(mm) Thickness(mm)
CC
40 200 mm (dp)
22
17
Nominal Length (Inches) : Li
Minimum Order Qty.
(No. of V-Belts)
22
Belt
Reference
Pitch
Length
(mm)
Li
(inches)
Belt
Reference
Pitch
Length
(mm)
Li
(inches)
Belt
Reference
Pitch
Length
(mm)
Li
(inches)
Belt
Reference
Pitch
Length
(mm)
Li
(inches)
CC 75
CC 81
CC 85
CC 86
CC 90
CC 94
CC 96
CC 105
CC 106
CC 112
1961
2113
2215
2240
2342
2444
2494
2723
2748
2901
75
81
85
86
90
94
96
105
106
112
CC 119
CC 120
CC 122
CC 126
CC 128
CC 135
CC 144
CC 153
CC 158
CC 162
3079
3104
3155
3256
3307
3485
3714
3942
4069
4171
119
120
122
126
128
135
144
153
158
162
CC 165
CC 173
CC 180
CC 189
CC 193
CC 195
CC 204
CC 206
CC 210
CC 224
4247
4450
4628
4857
4958
5009
5238
5288
5390
5746
165
173
180
189
193
195
204
206
210
224
CC 234
CC 240
CC 270
CC 300
CC 313
CC 330
CC 360
CC 390
CC 420
6000
6152
6914
7676
8006
8438
9200
9962
10724
234
240
270
300
313
330
360
390
420
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
30
LIGHT DUTY BELTS : 3L
Wrapped V-Belts : Blue Dry-Cover, Kevlar Belts for Lawn & Garden Application
Standard : RMA IP 23
Features :
• High tensile strength
• Non extensibility
• High resistance to shock loads
• High resistance to wear and tear
• Reduced slippage while clutching
• High resistance to repeated reverse flexing
• High resistance to oil, heat and cracking
Manufacturing Range
280 - 4064 mm (La)
10 mm
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40
3L
10
6
39 mm (de)
Nominal Length (inches) = Belt No./10 = La
Section
6 mm
Section : 3L
3L / 10x6
Weight per metre (Kgs)
0.057
3L / 10x6
Belt
Reference
Outside
Length
(inches)
La
(mm)
DRYB-3L-K-110
DRYB-3L-K-120
DRYB-3L-K-130
DRYB-3L-K-140
DRYB-3L-K-150
DRYB-3L-K-160
DRYB-3L-K-170
DRYB-3L-K-180
DRYB-3L-K-190
DRYB-3L-K-200
DRYB-3L-K-210
DRYB-3L-K-220
DRYB-3L-K-230
DRYB-3L-K-235
DRYB-3L-K-240
DRYB-3L-K-250
DRYB-3L-K-260
DRYB-3L-K-270
DRYB-3L-K-280
DRYB-3L-K-290
DRYB-3L-K-295
DRYB-3L-K-300
DRYB-3L-K-310
DRYB-3L-K-315
DRYB-3L-K-320
DRYB-3L-K-330
11
12
13
14
15
16
17
18
19
20
21
22
23
23.5
24
25
26
27
28
29
29.5
30
31
31.5
32
33
279
305
330
356
381
406
432
457
483
508
533
559
584
597
610
635
660
686
711
737
749
762
787
800
813
838
50
3L / 10x6
Belt
Reference
Outside
Length
(inches)
La
(mm)
Belt
Reference
DRYB-3L-K-340
DRYB-3L-K-350
DRYB-3L-K-355
DRYB-3L-K-360
DRYB-3L-K-365
DRYB-3L-K-370
DRYB-3L-K-380
DRYB-3L-K-385
DRYB-3L-K-390
DRYB-3L-K-400
DRYB-3L-K-405
DRYB-3L-K-410
DRYB-3L-K-415
DRYB-3L-K-420
DRYB-3L-K-430
DRYB-3L-K-440
DRYB-3L-K-450
DRYB-3L-K-460
DRYB-3L-K-470
DRYB-3L-K-480
DRYB-3L-K-490
DRYB-3L-K-500
DRYB-3L-K-510
DRYB-3L-K-520
DRYB-3L-K-530
DRYB-3L-K-540
34
35
35.5
36
36.5
37
38
38.5
39
40
40.5
41
41.5
42
43
44
45
46
47
48
49
50
51
52
53
54
864
889
902
914
927
940
965
978
991
1016
1029
1041
1054
1067
1092
1118
1143
1168
1194
1219
1245
1270
1295
1321
1346
1372
DRYB-3L-K-550
DRYB-3L-K-560
DRYB-3L-K-570
DRYB-3L-K-580
DRYB-3L-K-590
DRYB-3L-K-600
DRYB-3L-K-610
DRYB-3L-K-620
DRYB-3L-K-630
DRYB-3L-K-640
DRYB-3L-K-650
DRYB-3L-K-660
DRYB-3L-K-670
DRYB-3L-K-680
DRYB-3L-K-690
DRYB-3L-K-700
DRYB-3L-K-710
DRYB-3L-K-720
DRYB-3L-K-730
DRYB-3L-K-740
DRYB-3L-K-750
DRYB-3L-K-760
DRYB-3L-K-770
DRYB-3L-K-780
DRYB-3L-K-790
• Other Lawn & Garden belts to suit special manufacturer - specific applications available upon request
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
31
Minimum Order Qty.
(No. of V-Belts)
Outside
Length
(inches)
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
La
(mm)
1397
1422
1448
1473
1499
1524
1549
1575
1600
1626
1651
1676
1702
1727
1753
1778
1803
1829
1854
1880
1905
1930
1956
1981
2007
LIGHT DUTY BELTS : 4L
Wrapped V-Belts : Blue Dry-Cover, Kevlar Belts for Lawn & Garden Application
Standard : RMA IP 23
Features :
13 mm
• High tensile strength
• Non extensibility
8 mm
• High resistance to shock loads
• High resistance to wear and tear
Section : 4L
• Reduced slippage while clutching
• High resistance to repeated reverse flexing
• High resistance to oil, heat and cracking
Manufacturing Range
381 - 4928 mm (La)
Weight per metre (Kgs)
0.104
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
40
13
8
64 mm (de)
4L
Nominal Length (inches) = Belt No./10 = La
Section
4L / 13x8
4L / 13x8
Minimum Order Qty.
(No. of V-Belts)
40
4L / 13x8
Belt
Reference
Outside
Length
(inches)
La
(mm)
Belt
Reference
Outside
Length
(inches)
La
(mm)
Belt
Reference
Outside
Length
(inches)
DRYB-4L-K-170
DRYB-4L-K-180
DRYB-4L-K-190
DRYB-4L-K-200
DRYB-4L-K-210
DRYB-4L-K-215
DRYB-4L-K-220
DRYB-4L-K-230
DRYB-4L-K-240
DRYB-4L-K-250
DRYB-4L-K-260
DRYB-4L-K-270
DRYB-4L-K-280
DRYB-4L-K-290
DRYB-4L-K-295
DRYB-4L-K-300
DRYB-4L-K-305
DRYB-4L-K-310
DRYB-4L-K-315
DRYB-4L-K-320
DRYB-4L-K-325
DRYB-4L-K-330
DRYB-4L-K-335
DRYB-4L-K-340
DRYB-4L-K-345
DRYB-4L-K-350
DRYB-4L-K-355
DRYB-4L-K-360
DRYB-4L-K-370
DRYB-4L-K-375
DRYB-4L-K-380
DRYB-4L-K-390
DRYB-4L-K-395
DRYB-4L-K-400
DRYB-4L-K-405
DRYB-4L-K-410
DRYB-4L-K-420
DRYB-4L-K-425
DRYB-4L-K-430
DRYB-4L-K-440
DRYB-4L-K-450
17
18
19
20
21
21.5
22
23
24
25
26
27
28
29
29.5
30
30.5
31
31.5
32
32.5
33
33.5
34
34.5
35
35.5
36
37
37.5
38
39
39.5
40
40.5
41
42
42.5
43
44
45
432
457
483
508
533
546
559
584
610
635
660
686
711
737
749
762
775
787
800
813
826
838
851
864
876
889
902
914
940
953
965
991
1003
1016
1029
1041
1067
1080
1092
1118
1143
DRYB-4L-K-455
DRYB-4L-K-460
DRYB-4L-K-470
DRYB-4L-K-480
DRYB-4L-K-490
DRYB-4L-K-495
DRYB-4L-K-500
DRYB-4L-K-510
DRYB-4L-K-520
DRYB-4L-K-530
DRYB-4L-K-540
DRYB-4L-K-550
DRYB-4L-K-560
DRYB-4L-K-570
DRYB-4L-K-580
DRYB-4L-K-590
DRYB-4L-K-600
DRYB-4L-K-610
DRYB-4L-K-620
DRYB-4L-K-630
DRYB-4L-K-640
DRYB-4L-K-650
DRYB-4L-K-660
DRYB-4L-K-665
DRYB-4L-K-670
DRYB-4L-K-680
DRYB-4L-K-690
DRYB-4L-K-700
DRYB-4L-K-710
DRYB-4L-K-720
DRYB-4L-K-730
DRYB-4L-K-740
DRYB-4L-K-750
DRYB-4L-K-760
DRYB-4L-K-770
DRYB-4L-K-780
DRYB-4L-K-785
DRYB-4L-K-790
DRYB-4L-K-800
DRYB-4L-K-810
DRYB-4L-K-820
45.5
46
47
48
49
49.5
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
66.5
67
68
69
70
71
72
73
74
75
76
77
78
78.5
79
80
81
82
1156
1168
1194
1219
1245
1257
1270
1295
1321
1346
1372
1397
1422
1448
1473
1499
1524
1549
1575
1600
1626
1651
1676
1689
1702
1727
1753
1778
1803
1829
1854
1880
1905
1930
1956
1981
1994
2007
2032
2057
2083
DRYB-4L-K-830
DRYB-4L-K-840
DRYB-4L-K-850
DRYB-4L-K-860
DRYB-4L-K-870
DRYB-4L-K-880
DRYB-4L-K-885
DRYB-4L-K-890
DRYB-4L-K-895
DRYB-4L-K-900
DRYB-4L-K-905
DRYB-4L-K-910
DRYB-4L-K-920
DRYB-4L-K-925
DRYB-4L-K-930
DRYB-4L-K-940
DRYB-4L-K-950
DRYB-4L-K-960
DRYB-4L-K-970
DRYB-4L-K-980
DRYB-4L-K-990
DRYB-4L-K-995
DRYB-4L-K-1000
DRYB-4L-K-1010
DRYB-4L-K-1020
DRYB-4L-K-1030
DRYB-4L-K-1040
DRYB-4L-K-1045
DRYB-4L-K-1050
DRYB-4L-K-1060
DRYB-4L-K-1070
DRYB-4L-K-1080
DRYB-4L-K-1110
DRYB-4L-K-1120
DRYB-4L-K-1130
DRYB-4L-K-1160
DRYB-4L-K-1200
DRYB-4L-K-1260
DRYB-4L-K-1390
DRYB-4L-K-1580
83
84
85
86
87
88
88.5
89
89.5
90
90.5
91
92
92.5
93
94
95
96
97
98
99
99.5
100
101
102
103
104
104.5
105
106
107
108
111
112
113
116
120
126
139
158
• Other Lawn & Garden belts to suit special manufacturer - specific applications available upon request
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
32
La
(mm)
2108
2134
2159
2184
2210
2235
2248
2261
2273
2286
2299
2311
2337
2350
2362
2388
2413
2438
2464
2489
2515
2527
2540
2565
2591
2616
2642
2654
2667
2692
2718
2743
2819
2845
2870
2946
3048
3200
3531
4013
LIGHT DUTY BELTS : 5L
Wrapped V-Belts : Blue Dry-Cover, Kevlar Belts for Lawn & Garden Application
Standard : RMA IP 23
Features :
• High tensile strength
• Non extensibility
• High resistance to shock loads
• High resistance to wear and tear
• Reduced slippage while clutching
• High resistance to repeated reverse flexing
• High resistance to oil, heat and cracking
5L / 17x10
Belt
Reference
Outside
Length
(inches)
DRYB-5L-K-230
DRYB-5L-K-240
DRYB-5L-K-250
DRYB-5L-K-260
DRYB-5L-K-270
DRYB-5L-K-280
DRYB-5L-K-290
DRYB-5L-K-300
DRYB-5L-K-310
DRYB-5L-K-320
DRYB-5L-K-330
DRYB-5L-K-340
DRYB-5L-K-350
DRYB-5L-K-360
DRYB-5L-K-370
DRYB-5L-K-380
DRYB-5L-K-390
DRYB-5L-K-400
DRYB-5L-K-410
DRYB-5L-K-415
DRYB-5L-K-420
DRYB-5L-K-430
DRYB-5L-K-440
DRYB-5L-K-450
DRYB-5L-K-460
DRYB-5L-K-470
DRYB-5L-K-480
DRYB-5L-K-490
DRYB-5L-K-500
DRYB-5L-K-510
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
41.5
42
43
44
45
46
47
48
49
50
51
Manufacturing Range
533 - 5588 mm (La)
17 mm
10 mm
Dimensions
Angle Rec. Min
Topwidth(mm) Thickness(mm) Degree Pulley Dia.
5L
40
10
89 mm (de)
17
Nominal Length (inches) = Belt No./10 = La
Section
Section : 5L
5L / 17x10
La
(mm)
584
610
635
660
686
711
737
762
787
813
838
864
889
914
940
965
991
1016
1041
1054
1067
1092
1118
1143
1168
1194
1219
1245
1270
1295
Belt
Reference
Outside
Length
(inches)
DRYB-5L-K-520
DRYB-5L-K-530
DRYB-5L-K-540
DRYB-5L-K-550
DRYB-5L-K-560
DRYB-5L-K-570
DRYB-5L-K-580
DRYB-5L-K-590
DRYB-5L-K-600
DRYB-5L-K-610
DRYB-5L-K-620
DRYB-5L-K-630
DRYB-5L-K-640
DRYB-5L-K-650
DRYB-5L-K-660
DRYB-5L-K-670
DRYB-5L-K-680
DRYB-5L-K-690
DRYB-5L-K-700
DRYB-5L-K-710
DRYB-5L-K-720
DRYB-5L-K-730
DRYB-5L-K-740
DRYB-5L-K-750
DRYB-5L-K-760
DRYB-5L-K-770
DRYB-5L-K-780
DRYB-5L-K-790
DRYB-5L-K-800
DRYB-5L-K-810
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
Minimum Order Qty.
(No. of V-Belts)
30
5L / 17x10
La
(mm)
Belt
Reference
1321
1346
1372
1397
1422
1448
1473
1499
1524
1549
1575
1600
1626
1651
1676
1702
1727
1753
1778
1803
1829
1854
1880
1905
1930
1956
1981
2007
2032
2057
DRYB-5L-K-820
DRYB-5L-K-830
DRYB-5L-K-840
DRYB-5L-K-850
DRYB-5L-K-860
DRYB-5L-K-870
DRYB-5L-K-880
DRYB-5L-K-890
DRYB-5L-K-900
DRYB-5L-K-910
DRYB-5L-K-920
DRYB-5L-K-930
DRYB-5L-K-940
DRYB-5L-K-950
DRYB-5L-K-960
DRYB-5L-K-970
DRYB-5L-K-980
DRYB-5L-K-990
DRYB-5L-K-1000
DRYB-5L-K-1010
DRYB-5L-K-1020
DRYB-5L-K-1030
DRYB-5L-K-1040
DRYB-5L-K-1050
DRYB-5L-K-1060
DRYB-5L-K-1070
DRYB-5L-K-1080
DRYB-5L-K-1090
DRYB-5L-K-1100
• Other Lawn & Garden belts to suit special manufacturer - specific applications available upon request
• Prices on request • References in bold are standard stock items • Non standard stock items are available on request
33
Weight per metre (Kgs)
0.157
Outside
Length
(inches)
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
La
(mm)
2083
2108
2134
2159
2184
2210
2235
2261
2286
2311
2337
2362
2388
2413
2438
2464
2489
2515
2540
2565
2591
2616
2642
2667
2692
2718
2743
2769
2794
PIX COMBINE HARVESTER BELTS
Features :
• Designed for efficient power transmission with minimised heat generation
• Provides high stability and minimizes deflection in the cross section
• Minimum stretch stiff polyester cords have been designed for heavy power transmission, while at the same time ensuring a very high degree
of length stability
• The sides of the belt have excellent abrasion resistant properties contributing significantly to long and useful belt life
• Moulded cogs reduces bending stresses and improves heat dissipation in Cut Edge construction
BELTS TO FIT AS CLAAS
BELT
REFERENCE
HC 060306
HC 061253
HC 061360
HC 061700
HC 061701
HC 064168
HC 070953
HC 233843
HC 500863
HC 501925
HC 506671
HC 523252
HC 532011
HC 560562
HC 603015
HC 603017
HC 603048
HC 603122
HC 603247
HC 603317
HC 603336
HC 603337
HC 603354
HC 603380
HC 609762
HC 609822
HC 609823
HC 610196
HC 610197
HC 610830
HC 610833
HC 610835
HC 617309
HC 623252
HC 629000
HC 629001
HC 629002
HC 629035
HC 629036
HC 629081
HC 629214
HC 629279
HC 629366
HC 629410
HC 629436
HC 629441
HC 629510
HC 629580
HC 629732
HC 629737
HC 629756
HC 629763
HC 629769
HC 629836
HC 630025
HC 630043
HC 630144
HC 630156
HC 631904
HC 633030
HC 635494
HC 636021
HC 640653
HC 644015
CLAAS BELT
APPLICATION
MODEL/MACHINE
REFERENCE
COUNTER SHAFT DRIVE
STRAW CHOPPER
STRAW CHOPPER
STRAW CHOPPER
FOR GRAIN
INTERMEDIATE DRIVE
DOM 80, 85, 86
DOM 100,105
DOM 76, 96, 98
COM DOM 114,115,116
DOM 112,114,115,116 COM DOM 114,115,116
FAN SCREEN
TURNING DRUM DRIVE
FEEDER ELEVATOR
FOR STRAW DISTRIBUTOR
SIEVE BOX
HYDR PUMP
CUTTING TABLE CLUTCH
CYLINDER 650-1500 RPM
SIEVE PAN
COM DOM 114,115,116
MATADOR, STD, GIGANT
DOM 80, 85
DOM 86, 98
MATADOR, STD, GIGANT
DOM 80, 85
DOM 80, 85
DOM 58, 68, 86
DOM 86, 98
DOM 76, 86, 96
DOM 76, 86, 96
DOM 86
DOM 76, 86, 96, 98
DOM 76, 86, 96, 98
DOM 106,108H
DOM 68,106
DOM 106,108H,108M
DOM 98,108
DOM 98,108
MATADOR, STD, GIGANT
MATADOR, STD, GIGANT
SEN, MERC 50,60 (DET)
SEN, MERC 50,60 (NON DET)
MATADOR, STD, GIGANT
GIGANT, MERC, SEN
STRAW ROLLER
TRACTION VARIATOR
RETURNS AUGER
FAN DRIVE
CYLINDER
COUNTERSHART DRIVE
SIEVE PAN
TRACTION UP
TRACTION LO
FAN
TURNING DRUM DRIVE
KNIFE DRIVE
KNIFE DRIVE
FAN
CYLINDER (USED IN PAIRS)
KNIFE DRIVE
THRESHING MACHINE DRUM
HYDR PUMP TRACTION DRIVE
HYDR PUMP
CYLINDER VARIABLE SPEED
STRAW WALKER
GRAIN AUGER
KNIFE DRIVE
MAIN
DRUM
KNIFE DRIVE
TRACTION
TABLE
THRESHING MACHINE
THRESHING MACHINE
ELEVATOR
TRACTION
TRACTION
GRAIN TANK
GRAIN TANK
DOM 98,106
DOM 98,100-105,106
DOM 100-105
DOM 80, 85,100,106
DOM 80, 85,100,105
DOM 66,100,105
DOM 76, 80, 85, 86, 96
DOM 106,108H
DOM 106
DOM 76, 96,106
DOM 56, 66, 76
DOM 106, 108H
DOM 80'85'100-105
DOM 80'85'
DOM 86, 98,100-105
DOM 56, 66, 76
DOM 48, 58, 68
DOM 108H
DOM 108M
DOM 98,108M, 68
GIGANT, MATADOR
GIGANT, MATADOR
SEN, GIGANT, MERCATOR
MATADOR, STD, GIGANT SF
SEN
DOM 80-85, SEN
DOM 56, 66,8 6
MATADOR, GIGANT
DOM 106,108H,108M
DOM 112
MAIN DRIVE FLAT
DRUM FLAT
MAIN DRIVE
TRACTION DRIVE
TRACTION DRIVE
HYDR PUMP
STRAW SPREADER
GRAIN TANK
RETURNS AUGER
ROLLER
• Prices on request • Non standard stock items are available on request
34
BELTS TO FIT AS CLAAS
BELT
REFERENCE
HC 644016
HC 644017
HC 644018
HC 644177
HC 653059
HC 653060
HC 653062
HC 653063
HC 653064
HC 653120
HC 653121
HC 653380
HC 653450
HC 653779
HC 653933
HC 654013
HC 654534
HC 655408
HC 656028
HC 670224
HC 671012
HC 671013
HC 671015
HC 671083
HC 671209
HC 672353
HC 672358
HC 672359
HC 673601
HC 673614
HC 673625
HC 673638
HC 673639
HC 673690
HC 680334
HC 687046
HC 692149
HC 692150
HC 702509
HC 702536
HC 706087
HC 713506
HC 720696
HC 720866
HC 750294
HC 755070
HC 767057
HC 769202
HC 774099
HC 778561
HC 778717
HC 801222
HC 802931
HC 061353
HC 176442
HC 176542
HC 176543
HC 603430
HC 644209
HC 644419
HC 644447
HC 644538
HC 644685
HC 644781
HC 644866
HC 661093
HC 661245
HC 661345
HC 667242
CLAAS BELT
APPLICATION
MODEL/MACHINE
REFERENCE
ROLLER
HYDR PUMP
MAIN DRIVE
CYLINDER 500-1400 RPM
MAIN DRIVE
MAIN 3HB BAND
MAIN DRIVE
CUTTING TABLE
MAIN DRIVE
SHAKER SHOE DRIVE
FAN (HEX)
FANNING MILL
STRAW SPREADER
TANK UNLOADER DRIVE
STRAW WALKER
UNLOADING GRAIN TANK
UNLOADING GRAIN TANK
TRACTION DRIVE
HYDR PUMP
REEL VARIATOR
MAIN DRIVE
FROM CUTTING TABLE
CYLINDER VARIABLE SPEED
TRACTION VARI DRIVE
VARI SPEED FAN
CUTTING TABLE
SHAKER SHOE FANNING MILL
SHAKER SHOE RETURN AUGER
STRAW WALKER
GRAIN TANK UNLOADING
HYDR PUMP TRACTION DRIVE
TABLE CLUTCH
CUTTING TABLE
GRAIN AUGER
DOM 116
COM 115,116,DOM 115,116
DOM 115,116
DOM 68,106
MERC 50,60,75 SEN
MERC 50,60,75 SEN
MERC 50,60,75 SEN
MERC 50,60,75 SEN
MERC 50,60,75 SEN
MERC 50,60,75 SEN
GIGANT, SEN
MERCATOR S70,75,SEN
MERCATOR 50,60,S70,75
MERCATOR 50,60,S70,75 SEN
SEN
S70,75
MERCATOR 50,60,SEN
DOM 80,85,MER 50,60,S70,75
DOM 112, 114,115,116
DOM 56,66,76,80,85,86,96,98
DOM 202
DOM 80-85
DOM 80-85
DOM 56,66,76,80-85,86,96,98
DOM 100-105
DOM 80-85
DOM 80-85
DOM 80-85
DOM 76,80-85,96
DOM 76,80-85,96
DOM 68,86,98
DOM 80-85
DOM 80-85
DOM 68,108H,108M
MER S70,75
DOM 202
DOM 202
CONSUL
CONSUL
CONSUL
SHAKER
MAIZE PICKER
MAIZE PICKER
CUTTING TABLE
VARI CYLINDER
UNLOADING GRAIN TANK
TO CUTTING TABLE
TURNING DRUM
TRACTION DRIVE
TRACTION DRIVE
HYDR PUMP
HYDR PUMP
KNIFE DRIVE
STRAW WALKER
VARI SPEED FAN
KNIFE DRIVE
THRESHING MACHINE
AIR INTAKE
STRAW CHOPPER DRIVE
DRUM DRIVE
HYDROSTATIC PUMP DRIVE
HYDROSTATIC PUMP DRIVE
CUTTER BAR CLUTCH DRIVE
SIEVE PAN DRIVE
CUTTER BAR CLUTCH DRIVE
AIR INTAKE DRIVE
DRUM V/S DRIVE
STRAW COPPER DRIVE
FAN DRIVE
SIEVE PAN DRIVE
STRAW COPPER DRIVE
ENGINE SHAFT DRIVE
COOLER FAN DRIVE
FAN & ROTARY SCREEN DRIVE
CONSUL
CONSUL, DOM 80-85
MATADOR, SEN
MERCATOR 50,60,S75,75
MATADOR, DOM 80-85,86,98
DOM 80-85,100,105
CONSUL
DOM,SEN,MERCATOR
SEN, MATADOR
DOM 80-85,96,98
DOM 203 - 218MEGA
LEXION 415 -430 AND 440 - 460
DOM 106 - 108
DOM 76-96/TRACTION DRIVE JAGUAR 675-680
DOM108 - 228MEGA
PRIMARY LEXION RANGE
COMMANDER 116 - 228
DOM 203 - 218 MEGA
DOM 203 - 204 MEGA
PRIMARY LEXION 480
LEXION 415 - 460
THIRD STAGE LEXION 480
FINAL LEXION 440 - 460
DOM 208 - 218 MEGA
DOM 203 - 218 MEGA
LEXION RANGE
• Prices on request • Non standard stock items are available on request
35
BELTS TO FIT AS CLAAS
BELT
REFERENCE
HC 667248
HC 667249
HC 667250
HC 667251
HC 667252
HC 667427
HC 667453
HC 667454
HC 667456
HC 667477
HC 667554
HC 667681
HC 667684
HC 667798
HC 742025
HC 749712
HC 821734
CLAAS BELT
APPLICATION
MODEL/MACHINE
REFERENCE
DRUM DRIVE
IMPELLOR DRUM DRIVE
UNLOADER DRIVE
SPEED REDUCING GEAR BOX DRIVE
SIEVE PAN DRIVE
HYBRID DRIVE
DRUM DRIVE
INTAKE DRIVE LEXION RANGE
ROTARY SCREEN DRIVE
STRAW WALKER DRIVE
HYBRID DRIVE
GRAIN TANK UNLOADER DRIVE
STRAW CHOPPER DRIVE
STRAW SPREADER DRIVE
KNIFE DRIVE
STRAW CHOPPER DRIVE
ROTARY SCREEN DRIVE
LEXION 440 - 460/415 - 430
LEXION RANGE
LEXION 440 - 460& 480
LEXION RANGE
SECOND STAGE LEXION RANGE
SECOND STAGE LEXION 480
LEXION 440 - 460
LEXION 440 - 460 & 480
LEXIO 440-460 & 480
LEXION RANGE
1ST STAGE LEXION 480
LEXION 405 - 430
FOURTH STAGE LEXION 415 -430
1ST STAGE LEXION 480
LEXION 480
3RD STAGE LEXION 480
DOM 108 -118
BELTS TO FIT AS BIZON
BELT
REFERENCE
Z40 Z50 Z56
Z40 Z50 Z57
Z40 Z50 Z56
Z40 Z50 Z56
Z40 Z50 Z56
Z40 Z50
Z40 Z50 Z56
Z40 Z50 Z56
Z56 SUPER
BIZON BELT
APPLICATION
JACKSHAFT FEEDER
JACKSHAFT FEEDER
REEL VARI SPEED
THRESHING DRUM VARI SPEED
REAL BEATER
TANK UNLOADER AUGER
TRACTION VARI SPEED
GRAIN ELEVATOR UPPER
MAIN DRIVE 3HB
• Prices on request • Non standard stock items are available on request
36
BELTS TO FIT AS DEUTZ FAHR
BELT
REFERENCE
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
01129970
01136747
01139218
01139222
01139231
01139233
01139241
01139242
01139258
01139260
01139301
01141510
01141591
01141595
01141608
01141613
01141615
01141643
01141644
01141645
01141666
01141749
01141941
01143410
01143413
01145025
01145026
01145049
01145051
01145052
01145054
01145055
01145056
01145097
01145188
01145202
02234343
02235177
02235180
02235254
02235532
02237477
06210853
06210890
06210915
06210917
06210922
06210927
06210975
06210990
06210991
06210993
06211014
06211026
06211031
06211053
06212866
06212915
06212918
06212919
06212924
06212933
06215196
06215197
06215199
06215202
06215203
06215204
06215205
06215206
CLAAS BELT
OLD PART NUMBER
MODEL/MACHINE
REFERENCE
88 7753 6.560
CHOPPER TRANSMISSION 1300/02
CHOPPER DRIVE
88, 1102, 1202
GENERATOR
1000, 1200
RADIATOR FAN
HYDRAULIC STEERING
COMPRESSOR
2385, 2480-2780
FAN DRIVE
1300/02, 3570, 80
STRAW WALKER & FAN
1600, 3610/30/40
CHOPPER TRANSMISSION 2580-2680
CHOPPER TRANSMISSION 2480-2780
COUNTERSHAFT
M1000,M1200
STRAW STRIPPER DRUM 3610/30/40
STRAW STRIPPER DRUM 3570, 3580
CUTTING TABLE DRIVE
3570/80, 3610/30/40
STRAW STRIPPER DRUM 3570/80, 3610/30/40
GRAIN TANK CLUTCH
3570/80, 3610/30/40
MAIZE PICKING ATTACHMENTS DRIVE
88 7753 2.116
88 7753 2.134
88 7753 3.123
88 7753 4.344
88 7753 4.369
88 7753 6.511
89 0946 6.183
89 0946 6.044
STRAW CHOPPER
3570/80, 3610
GRAIN TANK EMPTYING
STRAW HOOD
3630/40
STRAW STRIP DRUM FEED CHANNEL 4070/75
STRAW STRIP DRUM - TURBO SEPARATOR 4070/75
WALKER TRANS - SHAKER SHOE TRANS
4070/75
CUTTING TABLE DRIVE
4070/75
THRESHING DRUM VARIATOR
4070/75
COUNTERSHAFT THRESHING DRUM 4070/75
STRAW STRIPPER DRUM
4070/75
WALKER TRANS - RETURNS ELEVATOR
4070/75
STRAW WALKER DRIVE
4070/75
ENGINE GRAIN TANK EMPTYING
4070/75
ENGINE - STRAW STRIPPER DRUM
4070/75
FAN SPEED VARIATOR
4070/75
STRAW CHOPPER
4070/75
STRAW WALKER TRANS - VARIATOR 4070/75
BLOWER DRIVE
GENERATOR DRIVE
BLOWER DRIVE
BLOWER DRIVE
GENERATOR DRIVE
CLEANING FAN
COUNTERSHAFT PICK UP
RETURNS ELEVATOR 1300/02, 1600, 5570/80, 3610
RETURNS ELEVATOR
2840-2780
GRAIN ELEVATOR
2385
COUNTERSHAFT GRAIN TANK
2480
GRAIN TANK DRIVE
2580-2780
KNIFE DRIVE
GRAIN TANK
2480
GRAIN TANK CLUTCH
1300/02
STRAW STRIPPER DRUM 1000, 1200/02
STRAW STRIPPER DRUM 1102, 1202
STRAW STRIPPER DRUM M660, 770,750
COMPRESSOR
UNLOADING
M600,750
KNIFE DRIVE
KNIFE DRIVE
1600
GRAIN TANK COUNTERSHAFT
STRAW STRIPPER DRUM
REEL/COUNTERSHAFT
1000,1200
COUNTERSHAFT FAN
900-1080
FAN SPEED VARIATOR
1000, 1200/02
COUNTERSHAFT FAN
2480-2780
STRAW STRIPPER DRUM 2480-2680
STRAW STRIPPER DRUM M2385
FEED CHANNEL
2385, 2480-2780
CONVEYOR
88 2215 3.165
88 2215 3.315
88 2215 3.355
88 2215 3.412
88 2215 5.276
88 2215 5.280
88 2215 6.135
88 2215 6.280
88 2215 6.343
88
88
88
88
89
89
89
89
89
89
89
89
7753
7753
7753
7753
0946
0946
0946
0946
0946
0946
0946
0946
4070/75
4070/75
900, 1080
2480,2680
4070/75
5.265
5.289
6.212
6.410
1.303
1.327
1.329
1.503
1.504
1.505
1.510
1.628
• Prices on request • Non standard stock items are available on request
37
BELTS TO FIT AS DEUTZ FAHR
Belt
Reference
HDF 06215209
HDF 06215213
HDF 06215214
HDF 06215215
HDF 06215216
HDF 06215217
HDF 06215220
HDF 06215221
HDF 06215222
HDF 06215233
HDF 06215234
HDF 06215235
HDF 06215236
HDF 06215237
HDF 06215238
HDF 06215239
HDF 06215240
HDF 06215241
HDF 06215243
HDF 06215244
HDF 06215245
HDF 06215248
HDF 06215249
HDF 06215250
HDF 06215253
HDF 06215255
HDF 06215257
HDF 06215258
HDF 06215259
HDF 06215261
HDF 06215262
HDF 06234476
HDF 06236657
HDF 06240268
HDF 06241147
HDF 06241305
HDF 06255583
HDF 06256381
HDF 06256546
HDF 06256619
HDF 06256714
HDF 06257898
HDF 06528420
CLAAS BELT
OLD PART NUMBER
MODEL/MACHINE
REFERENCE
TRAVEL DRIVE
2480-2780
TRACTION VARI
900-1002
TRACTION
2580-2685
TRAVEL VARIATOR
M900-1080
TRAVEL SPEED VARIATOR 2385
REEL VARIATOR
DRUM VARI
900, 1080, 2385, 2480-2780
DRUM VARI
1300 (LONG) M1600
DRUM VARI
1000-1202, 1300-1600, 3570, 3640
FEED CHANNEL
1300/02, M1600
GRAIN TANK DISCHARGE 1300
GRAIN TANK DISCHARGE M1600
DRUM
900-1080
DRUM
900-1080
STRAW STRIPPER DRUM 2685-2780
STRIPPER DRUM
2580, 2780
STRAW STRIPPER DRUM 2480-2780
TANK
MAIN DRIVE
2385
COUNTERSHAFT
3570/80
CHOPPER TRANSMISSION 2480-2780
STRAW STRIPPER DRUM 1300/02
CONVEYOR
STRAW STRIPPER DRUM 900-1080, 2385
STRAW STRIPPER DRUM 2480-2780
WALKER & SHAKER SHOE DRIVE
COUNTERSHAFT
2480
COUNTERSHAFT
2580, 2680, 2780
STRAW STRIPPER DRUM 1600
STRAW STRIPPER DRUM
MAIN DRIVE
2685, 2780
STRIPPER FLAT
600, 660, 750
TRACTION DRIVE
600, 660, 750
RETURNS ELEVATOR
1000, 1200/02
GRAIN TANK
1000, 1200/02, 1102
TRACTION VARI (PAIR)
1000-1200, 1102-1202
MAIN DRIVE (PAIR
1300/02/02H
COUNTERSHAFT THRESHING DRUM
COUNTERSHAFT THRESHING DRUM
STRAW STRIPPER DRUM
SHAKER SHOE TRANSMISSION
ENGINE CHOPPER TRANS 4070/75
STRIPPER DRUM (FLAT
1000-1200
89 0946 1.784
89
89
89
89
89
0946
0946
0946
0946
0946
1.787
1.806
1.886
1.888
1.898
89
89
89
89
89
89
89
89
89
0946
0946
0946
0946
0946
0946
0946
0946
0946
6.049
6.050
6.051
6.052
6.053
6.054
6.057
6.100
6.101
89
89
89
89
89
0946
0946
0946
0946
0946
6.184
6.185
6.189
6.191
6.193
89
89
89
89
0946
0946
0946
0946
6.194
6.321
6.325
6.326
1116
1116
1116
2106
2107
2107
2107
2107
140
270
300
300
100
120
130
140
134
193
173
131
116
159
139
198
1116 120 119
• Prices on request • Non standard stock items are available on request
38
BELTS TO FIT AS DRONNINGBORG
BELT
REFERENCE
BELT APPLICATION
BELT
REFERENCE
BELT APPLICATION
HMD 28250931
HMD 28250932
HMD 41911000
HMD 41912300
HMD 41912400
HMD 41926300
HMD 41927800
HMD 41928100
HMD 41929000
HMD 41929100
HMD 41929500
HMD 41930200
HMD 41930300
HMD 41934800
HMD 49135500
HMD 41935700
HMD 41936200
HMD 41942100
HMD 41955900
P. O. A.
P. O. A.
10.85
8.30
8.30
6.37
7.03
7.30
7.77
7.90
7.90
8.17
8.17
10.78
11.51
11.72
12.18
19.42
23.37
HMD 41958500
HMD 41964300
HMD 41972100
HMD 41972800
HMD 41978500
HMD 41980400
HMD 41980800
HMD 41982400
HMD 41983500
HMD 41987300
HMD 41987600
HMD 41987800
HMD 41987900
HMD 41988700
HMD 41988900
HMD 41989100
HMD 41990100
HMD 41990200
HMD 41991700
50.42
6.56
84.03
13.46
84.03
199.79
104.92
14.46
16.81
37.30
47.34
17.54
13.73
38.83
38.43
52.29
145.29
145.96
127.08
BELTS TO FIT AS FORTSCHRITT
BELT
REFERENCE
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
HDF
9911861926
9911861524
9911861516
9911861540
4221668157
9911861268
9911861918
4221668165
4221121885
4221613133
9911861508
9911860435
9911860765
9911860765
9911861493
9911861557
9911861926
9911861901
9911861524
9911861444
4250121764
9911861268
9911861284
9911861918
4221668165
4221121885
4250121772
9911861508
9911860435
4250121780
9911860765
9911861436
9911861557
MODEL/MACHINE
REFERENCE
BELT APPLICATION
E512
E512
E512
E512
E512
E512
E512
E512
E512
E512
E512
E512
E512
E512
E512
E512
E514
E514
E514
E514
E514
E514
E514
E514
E514
E514
E514
E514
E514
E514
E514
E514
E514
ENGINE TO INTERMEDIATE SHAFT
ELEVATOR DRIVE TO GRAIN ELEVATOR
STRIPPER DRUM TO ELEVATOR DRIVE
ELEVATOR DRIVE TO RETURN ELEVATOR
MAIN DRIVE
DRUM SPEED CLOCK BELT
FAN BELTS, DRIVES HYDRAULIC PUMP
DRUM BELT
GROUND DRIVE FROM INTERMEDIATE SHAFT
UNLOADER AUGER BELT
DRIVES SHAKERS
DRIVES PICK UP CHAINS
VARIABLE SPEED ON REELS
FROM VARI SPEED OF FAN TO FAN SHAFT
WORKS FAN VARI DRIVE
DRIVES BIG RIDDLE PULLEY
ENGINE TO INTERMEDIATE SHAFT
ELEVATOR DRIVE TO GRAIN ELEVATOR
STRIPPER DRUM TO ELEVATOR DRIVE
ELEVATOR DRIVE TO RETURN ELEVATOR
MAIN DRIVE
DRUM SPEED CLOCK BELT
FAN BELT
FAN BELTS, DRIVES HYDRAULIC PUMP
DRUM BELT
GROUND DRIVE FROM INTERMEDIATE SHAFT
UNLOADER AUGER BELT
DRIVES SHAKERS
DRIVES PICK UP CHAINS
DRIVES HEADER
FROM VARI SPEED OF FAN TO FAN SHAFT
WORKS FAN VARI DRIVE
DRIVES BIG RIDDLE PULLEY
• Prices on request • Non standard stock items are available on request
39
BELTS TO FIT AS JOHN DEERE
BELT
REFERENCE
HJAT
HJAZ
HJAH
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
HJZ
28030
22914
79235
20459
20562
20703
20743
20823
21254
21400
21403
21500
21501
25670
28458
29962
30130
30593
30692
30920
31191
31283
32041
32173
32190
32568
33368
33774
33790
33967
34099
34121
34405
34786
34828
35965
36813
37473
38148
38149
38186
38697
38702
38703
38704
39312
39313
39314
41178
41563
41728
42756
42757
43863
43888
43889
43890
44936
46365
46366
46463
46709
46764
51212
BELT APPLICATION
MODEL/MACHINE
REFERENCE
WATERPUMP X 2
TRACTION DRIVE (PAIR)
FAN DRIVE
REEL SPEED VARI DRIVE
REEL DRIVE
FAN DRIVE
ROTARY SCREEN ELEVATOR
DRUM VARI
HYDR PUMP
UNLOADING SYSTEM
DRUM DRIVE (FLAT)
SICKLE KNIFE DRIVE
STRAW ELEVATOR
KNIFE
ROTARY SCREEN
THRESHING DRUM DRIVE
STRAW ELEVATOR
HYDR PUMP
REEL VARI DRIVE
STRAW WALKER
THRESHING DRUM DRIVE
ROTARY SCREEN DRIVE
STRAW CHOP
THRESHING DRUM DRIVE
WATER PUMP
STRAW ELEVATOR DRIVE
UNLOADING SYSTEM
STRAW CHOPPER
MAIN DRIVE
TRACTION DRIVE LOW
TRACTION LOW
TRACTION DRIVE
FAN DRIVE
ROTARY SCREEN
HYDR PUMP
SHAKER DRIVE
REEL VARI DRIVE
CYLINDER
FAN DRIVE
RETURN PURIFY DRIVE
MAIN DRIVE
CUTTING TABLE LEAD IN
FAN DRIVE
FAN DRIVE
ROTARY SCREEN
950/60/70
965, 975, 985, 1065/75/85
985, 1075
950/60/70, 975, 955
950/60/70, 955, 975, 1075
950/60/70, 530-630
950-975, 1042-1065, 1166/69
530, 630, 730
950/60/70/955
950/60/70/955
630, 965-975
950/60/70, 955, 1055/75
950/60/70
950/60/70
950/60/70, 955, 975
950/60/70, 955
950/60/70, 955, 985
950/60/70
930/40, 1042/52
1088, 1166, 1177
950/60/70
955, 1055, 975, 1075
952, 955, 1065
975, 1075, 1085
955, 1055, 1057
965/75, 1075
965/75
985, 1075, 1085
1055, 952, 955
952/55/65/75, 1055/75/85
1075
965, 975, 1075, 1085
1065/75/85, 1177
1065/75/85
985, 1075, 1085
985, 1075 HY/4
985, 1075 HY/4
985, 1055/75/85
1085, 1177
1085 HY/4
1085 HY/4
1085/85 HY/4, 1088
1169 HY/4
1065/75, 1166, 1177
1065/75, 1166, 1177
1055/65/75/85
1085 HY/4
1075 HY/4
1088, 1166, 1169, 1174
1088,1177
1088, 1166, 1174, 1177
1088
1088
1088
1088, 1188
1088, 1166, 1188
1166, 1169 HY/4
1088, 1188
1088
1166, 1169 HY/4
1088, 1166/74/77/88
CUTTING TABLE DRIVE
CUTTING TABLE DRIVE
FAN VARI DRIVE
HYDR PUMP DRIVE
HYDR PUMP DRIVE
COMPRESSOR
AIR CONDITION
SUCTION FAN
FEEDER
FEEDER
FEEDER
CYLINDER
FAN
MAIN
HYDROSTATIC
ROTARY SCREEN
DISCHARGE
• Prices on request • Non standard stock items are available on request
40
BELTS TO FIT AS LAVERDA
BELT
REFERENCE
HL 432232
HL 432243
HL 432244
HL 432250
HL 432433
HL 432436
HL 432437
HL 433038
HL 433128
HL 433129
HL 433133
HL 433134
HL 433138
HL 433143
HL 433157
HL 433162
HL 433182
HL 433184
HL 433189
HL 433236
HL 433256
HL 433281
HL 433289
HL 433316
HL 433406
HL 433409
HL 433410
HL 433413
HL 433417
HL 433418
HL 433422
HL 433424
HL 433430
HL 433431
HL 433435
HL 433440
HL 433442
HL 433455
HL 433456
HL 433457
HL 433458
HL 433467
HL 433531
HL 433537
HL 433540
HL 433968
HL 433970
HL 434138
HL 434140
HL 434245
HL 434250
HL 435117
HL 435120
HL 435124
HL 435125
HL 435127
HL 435130
HL 435138
HL 435146
HL 435152
HL 4311127
HL 4311134
HL 4311212
HL 4311213
HL 4311217
HL 4311218
HL 4311221
HL 4311222
HL 4311314
HL 4311315
HL 4311316
HL 4311318
HL 4311319
HL 4311418
BELT APPLICATION
MODEL/MACHINE
REFERENCE
HYDR PUMP DRIVE
OIL PUMP
GRAIN TANK DISCHARGE DRIVE
MAIN FAN DRIVE
GRAIN & TAILINGS AUGER
DE AWNER PADD DRIVE
DE AWNER BEATERS DRIVE
COMPRESSOR
SELECTOR FAN DRIVE
COMPRESSOR DRIVE
ROTARY FILTER RETURN BELT
ROTARY FILTER
ROTARY FILTER
ROTARY FILTER BELT
BELT FOR BLOWER
ROTARY FILTER DRIVE
BELT FOR BLOWER
FAN RETURN BELT
ROTARY FILTER
SELECT AUGER BELT
OIL PUMP
SELECTOR AUGER BELT
FAN DRIVE
REEL DRIVE
FAN DRIVE
FAN RETURN BELT
FAN DRIVE
FAN RETURN BELT
GRAIN TANK DISCHARGE DRIVE
CONVERTOR
100, 120, 3200
3350, 112, 3450, 3600, 3700
100, 112, 150, 152
120
120, 150, 152
120
100, 120
3900
150, 152
3600, 3700
150, 152
112, 132, 3350, 3450
3600
150, 152, 3900
150
112, 132, 3350, 3450
112, 132, 152, 3350, 3450
150, 152, 3700
3600
112, 132, 3350, 3450
3900
84, 90, 150, 152
100, 112, 132, 3350, 3450
3350, 3450, 112, 132
150, 152
112, 1312, 3350, 3450
112, 1312, 3350, 3450
150, 152
112, 132, 150, 152
3450, 3600, 3700, 3900
MAIN FAN
GRAIN TAILINGS AUGER DRIVE
DE-AWNER DRIVE
REEL DRIVE BELT
REEL DRIVE CENTRAL RETURN DRIVE BELT
STRAW WALKER DRIVE
STRAW WALKER DRIVE
REEL DRIVE
STRAW WALKER
REEL DRIVE
AUGER DRIVE
STRAW ELEVATOR DRIVE BELT
CENTRAL RETURN BELT
RETURN DRIVE
STRAW WALKER AUGER DRIVE
STRAW WALKER AUGER DRIVE
REEL VARI DRIVE
REEL SPEED VARIATOR
THRESHING DRIVE BELT
THRESHING DRIVE BELT
BEATER DRUM DRIVE
TRACTION VARI DRIVE
CYLINDER VARI DRIVE
CYLINDER VARIATOR BELT
TRACTION DRIVE BELT
TRACTION VARI DRIVE
DRUM DRIVE
CYLINDER VARIATOR
CYLINDER DRIVE
STRAW ELEVATOR
GRAIN TAILINGS AUGER
HYDRAULIC PUMP
TRANS PUMP
THRESHING DRIVE HYDRAULIC PUMP 3300, 3600
3600, 3700, 3900
112, 132, 3350
150, 152
112, 120, 132, 150, 152, 3350
100,152
150, 152
112, 132, 3350, 3450
112, 132, 3350, 3450
3900
3200, 3300, 3600, 3800
3600, 3700
112, 150, 152, 3450
112, 132, 150, 152, 3450
3600, 3700, 3900
M90, 3200
84, 3300
112, 132, 3600, 3700, 3900
112, 132, 150, 152, 3350
M100/100AL
120
120
84, 3300
3700, 3900
132, 150, 152, 3450
100, 112, 132, 152, 3450
3600, 3700
84, 100, 3200, 3300
112
3600
3600, 3700
3600, 3700, 3900
112, 3300, 3350
84
112, 3350, 132, 3450
3350, 112
3900
150, 152
3450, 132
3600,3700
THRESHING DRIVE
THRESHING DRIVE
HYDRAULIC PUMP
THRESHING DRIVE BELT
THRESHING DRIVE
CYLINDER VARI DRIVE
FAN
CYLINDER DRIVE
3900
• Prices on request • Non standard stock items are available on request
41
BELTS TO FIT AS NEW HOLLAND CLAYSON
BELT
REFERENCE
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
066232
186347
230037
230038
230039
230041
230042
230043
230044
230046
230048
230051
230052
230053
230054
230056
230057
230059
230060
230061
230062
230064
230066
230073
230074
230075
230076
230077
230078
230079
230080
230101
230103
230108
230131
230151
230164
309087
309364
320935
321559
323413
323646
324391
326298
327040
327041
327062
328424
330204
330715
333255
333347
333958
334065
335258
336386
336426
336784
337415
350236
353584
354338
356024
356025
356913
362500
364033
364418
367659
BELT APPLICATION
MODEL/MACHINE
REFERENCE
STRAW ELEVATOR DRIVE
BEATER DRIVE BELT
FORD ENGINE
GENERATOR DRIVE
ENGINE MERCEDES
GRAIN TANK AUGER DRIVE
GRAIN TANK AUGER
HYDRAULIC PUMP
FAN DRIVE
ELEVATOR DRIVE
DISCHARGE AUGER
REEL INTERMEDIATE DRIVE
REEL INTERMEDIATE SHAFT
UNLOADING SYSTEM
TAILINGS ELEVATOR
THRESHING DRUM DRIVE
TAILINGS ELEV DRIVE
STRAW ELEVATOR DRIVE
REEL DRIVE
GRAIN TANK DRIVE
FAN WHEEL DRIVE
STRAW WALKER DRIVE
BLOWER DRIVE
STRAW ELEVATOR
KNIFE DRIVE/TRACTION
GROUND SPEED VARI DRIVE
THRESHING DRUM
GROUND SPEED VARI DRIVE
THRESHING DRUM DRIVE
BEATER DRIVE
BEATER DRIVE
REEL SPEED DRIVE
DISCHARGE AUGER
STRAW WALKER DRIVE
FAN BELT
POWER STEERING
GRAIN ELEVATOR DRIVE
SICKLE KNIFE DRIVE
UNLOADING SYSTEM
FAN VARI DRIVE
GROUND SPEED
TAILINGS ELEVATOR
MAIN SHAFT DRIVE
INTERMEDIATE REEL, KNIFE
UNLOADING SYSTEM
FAN BELT
GENERATOR DRIVE
FORD MOTOR
TRACTION DRIVE
FAN DRIVE
INTERMEDIATE KNIFE DRIVE
REEL DRIVE
ECCENTRIC & STRAW WALKER
UNLOADING SYSTEM
REEL VARIATOR
HYDR PUMP
FAN BELT DEUTZ
GENERATOR DRIVE
DRUM VARI DRIVE
KNIFE DRIVE
HYDR PUMP
GRAIN ELEVATOR DRIVE
ROTARY SCREEN DRIVE
GROUND SPEED
GROUND SPEED VARI DRIVE
SEPARATOR
SICKLE KNIFE DRIVE
FORD ENG
GROUND SPEED VARI DRIVE
8040/55
TF42-44, TX32, TX36
80, 103
80, 89, 103
1550
103, 133-135-140, 1530
80, 89, 103
80, 89, 103, 122, 133, 135, 1520/30
80, 89
80, 89, 122, 1250
80, 103
80, 89, 103
103
80, 89, 103
103
103, 133-135-140, 1530/45
8030/40/55
1520/30/40, 122, 133
80, 89, 103, 133-135-140, 1530/45
122, 133-135-140, 80, 89, 1520
103, 133-135-140, 1530/45
103
103
103, 133-135-140, 1530/45
103, 133-135-140, 80, 89
80, 89
103, 1520, 8060
103-135, 1530-1545, 8030/40/50
103, 122, 80, 1520/30/45
1520
103, 133-135-140, 1530/45
122, 133-135-140
133-135-140, 1530
133-135-140, 1530/45
80, 89
103, 8050/60/70/80
TX32, TX36, 1540/50, 8040
122, 133-135-140
133-135-140, 1530/45
1540, 1540AL, 1550
8070
1540, 1540AL, 1550
1540, 1540AL, 1550
1540, 1540AL, 1550
122, 1520
122, 1520
122, 133-135-140, 1520
122
122, 1520
122, 1520
1520/30, 8030/40
1520/30/40/45/50, 8050/60/70/80
1540/50
1540/50
1520/30/40/45/50, 8050/60/70/80
1540/50
133-135-140, 1530/40
133-135-140, 1530
1540/50, 8030/40/50/55/60
1520/30/40/45/50, 8050/60/70/80
TF42/44, TX30/32/36, 1540
1540/50
1540/50
8030/60
1550, 8070
1550
1540/50
550
1520
• Prices on request • Non standard stock items are available on request
42
BELTS TO FIT AS NEW HOLLAND CLAYSON
BELT
REFERENCE
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
371222
378672
378989
381237
381489
384397
387454
387460
387469
387931
388280
389245
391143
391650
393326
393519
394426
395955
396750
397297
397298
399058
410896
411543
420606
421173
422731
424318
427455
431784
432642
433639
433746
434044
434045
434046
434047
434160
434222
437033
439495
439496
439832
440780
443775
445640
446969
446970
447041
448794
451481
455865
605529
643353
746894
922872
922911
80434222
80443634
80747177
80754165
80754389
80913151
80913153
80919739
80923019
84015531
84015852
84023277
84023278
84036070
84041518
BELT APPLICATION
MODEL/MACHINE
REFERENCE
FAN BELT
ECCENTRIC & STRAW WALKER
FAN DRIVE
AIR COND
DUST SCREEN DRIVE
FAN DRIVE
RETHRESHER DRIVE
DRUM VARI DRIVE
TAILINGS ELEVATOR DRIVE
CONVEYOR
FAN VARI DRIVE
INTERMEDIATE DRIVE SHAFT
INTER KNIFE
DRUM VARIATOR
STRAW ELEVATOR DRIVE
HYDRAULIC PUMP DRIVE
HEADER DRIVE
VARIATOR DRIVE
COUNTERSHAFT DRIVE
INTERMEDIATE DRIVE
MAIN SHAFT DRIVE
FAN DRIVE
INTERMEDIATE DRIVE
HYDROSTATIC DRIVE
1520/30/40/45, 8050/60/70
1540/50
8050/60/70/80
TF42/44
8050/60/70/80
8070/80
8070/80
8070/80
8040/50/55/60/70/80
8080
8050/60/70/80
8050/60/70/80
8080
8070/80
8050/60/70/80
8030/40/55/80
8055/60/70
8040/50/60/70/80
8050/60/70/80
8050/60
8050/60
80/60
8050/60/70/80
8070/80
ALTERNATOR DRIVE
GRAIN ELEVATOR BOTTON AUGER
GROUND SPEED DRIVE
FAN DRIVE
STRAW WALKER DRIVE
MERCEDES ENGINE
GRAIN STORAGE DRIVE
STRAW ELEVATOR
ENGINE TO BEATER SHAFT
BEATER TO INTERIM SHAFT
ROTARY SEPARATOR
INT SEPARATOR
DRUM TO INTERIM SHAFT
BEATER TO STRAW ELEVATOR
COUNTER SHAFT DRIVE
DUST CAP
FAN DRIVE
FAN DRIVE
GROUND SPEED VARIATOR
BISON STRAW CHOP
UNLOADING AUGER
GROUND SPEED
GROUND SPEED
INTERMEDIATE SHAFT DRIVE
CLEANING SHOE DRIVE BELT
RETHRESHER DRIVE
BEATER TO INTERIM DRIVE
STRAW WALKER DRIVE
INTERMEDIATE SHAFT KNIFE
BISO CHOPPER
ENGINE TO BEATER SHAFT
ENGINE TO BEATER SHAFT
BEATER TO FRONT ELEVATOR
WATER PUMP DRIVE
ALTERNATOR DRIVE (ALT)
COMPRESSOR DRIVE
STRAW WALKER INTERMEDIATE DRIVE
COOLING FAN DRIVE
ROTARY SCREEN DRIVE
CLEANING FAN DRIVE
DUST SCREEN DRIVE (ALT)
ROTARY SEPARATOR DRIVE
BUBBLE UP BOX DRIVE
FAN VARIATOR DRIVE (ALT)
FAN VARIATOR DRIVE (ALT)
R H DRIVES
ROTARY SCREEN DRIVE
8060/8070
8030/40/55
8050
8055
TF42/44, 8080
TF42/44, TX30/32/36
TF42/44, TX30/32
TF42/44
TF42/44
TF42/44
TF42/44
TF42/44, TX30/32/36
TF42/44, TX32/36
8070
TF42/44
TF42/44
TF42/44
TF42/44, TX30/32
TF42/44, TX30/32/36
8055
NORMAL SPEED 8055
8055
TF42/44, TX30/32/36
8070/80
TF42/44, TX30/32/36
8050/60/70/80
1545, 8050
8050
TX30/32/36
TX30/32
TF AND TX RANGE
TX RANGE WITH FORD ENGINE
TX 32
Tx34
TX RANGE
TX 32 - 36
TX 32 - 36
TX 32 - 36
TX 32 - 36
TX 62 - 67
TX 62 - 67
TX RANGE
TX RANGE
TX 67
TX 67
• Prices on request • Non standard stock items are available on request
43
BELTS TO FIT AS NEW HOLLAND CLAYSON
BELT
REFERENCE
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
84078581
89501182
89502654
89513984
89514311
89514989
89817439
89817814
89818830
89831515
89833619
89850770
BELT APPLICATION
MODEL/MACHINE
REFERENCE
DRUM DRIVE
ALTERNATOR DRIVE (ALT)
FAN VARIATOR DRIVE (ALT)
BEATER DRIVE
ROTARY SCREEN DRIVE
STRAW ELEVATOR DRIVE
ROTARY SCREEN
DUST SCREEN DRIVE (ALT)
DUST SCREEN DRIVE
COOLING FAN DRIVE
ROTARY SCREEN DRIVE
ROTARY SEPARATOR DRIVE
TF & TX RANGES
TX RANGE
TX RANGE
TX RANGE
TX 64 - 65AND SOME TX 32
TX 32 - 36
TX 32
TX 32 - 36
TX 66 - 68
TC RANGE
TX 62
TX 62 - 68
BELTS TO FIT AS CASE/INTERNATIONAL HARVESTER
PART NUMBER
ON BELTS
1330499C1
1541702C1
191241C3
244420A1
244422A1
PIX
LABEL
PIX
PIX
PIX
PIX
PIX
HI
HI
HI
HI
HI
APPLICATION
1330499
1541702
191241
244420
244422
SEPARATOR DRIVE 1680UP TO 114634
SEPARATOR DRIVE 1680FROM 114635
SEPARATOR DRIVE 1660, 2166,2365, 2366
ROTOR DRIVE 1660, 2166, 2365, 2366
ROTOR DRIVE 1680, 2188
GRASS MACHINERY BELTS
PART NUMBER
ON BELTS
XX052393.1
XX067746.0
XX067747.1
XX067789.0
XX073204.0
XX076401.0
XX077276.0
XX077400.0
XX077796.0
LL077797.0
XX074803.2
XX074771.2
LL070952.2
XX742206.0
XX750193.2
PIX
LABEL
PIX
PIX
PIX
PIX
PIX
PIX
PIX
PIX
PIX
PIX
PIX
PIX
PIX
PIX
PIX
GMC
GMC
GMC
GMC
GMC
GMC
GMC
GMC
GMC
GMC
GMC
GMC
GMC
GMC
GMC
APPLICATION
052393
067746K
067747K
067789K
073204
076401K
077276
077400K
077796K
077797K
1082K
1083K
1085K
742206
750193
AIR CONDITIONING DRIVE JAGUAR 820 - 840
AUX GEARBOX /ENGINE OUTPUT JAGUAR 870 - 850
AUX GEARBOX /ENGINE OUTPUT JAGUAR 890 - 900
CORN CRACKER DRIVE JAGUAR 830 - 900
CORN CRACKER DRIVE JAGUAR 682 - 685
ENGINE OUTPUT DRIVE JAGUAR 860
ROTARY SCREEN DRIVE JAGUAR 820 - 840
AXIAL FLOW FAN DRIVE JAGUAR 820 - 840
ENGINE OUTPUT DRIVE JAGUAR 860 - 880 820 - 840 (ALT) 265KW
ENGINE OUTPUT DRIVE 228KW JAGUAR 820 - 840 (ALT)
CUTTING CYLINDER DRIVE JAGUAR 685SL (ALT) 690SL
CUTTING CYLINDER DRIVE JAGUAR 685SL (ALT) 695SL
CUTTING CYLINDER DRIVE JAGUAR 685L - 690
AXIAL FLOW FAN DRIVE JAGUAR 860 - 880
HYDRAULIC PUMP DRIVE JAGUAR 675 - 680
• Prices on request • Non standard stock items are available on request
44
BELTS TO FIT AS MASSEY FERGUSON
BELT
REFERENCE
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
BELT
REFERENCE
226848
226981
228722
228813
230381
233950
265522
273757
274015
274252
281560
320593
402607
411218
417441
619317
621320
621321
621646
629212
782835
782849
783539
783907
784170
784796
784797
785585
785806
785810
789853
789930
789931
789967
790833
790839
793861
793862
793863
795514
795582
832490
832866
833768
833854
833856
833857
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
HM
• Prices on request • Non standard stock items are available on request
45
833858
833859
833860
833862
833863
833865
833866
833867
833868
833871
833872
833873
833874
834110
834139
834140
834174
842413
842417
842423
842845
843302
843310
843313
843324
843747
843760
843948
844077
844079
905920
905921
905981
905982
1603701
1615254
1615333
1616477
1616714
1616715
1720255
1724154
1855008
3371438
3377029
3377030
POWER
DRIVE
TAPER BORE “SPZ” SECTION PULLEYS
GROOVE
BUSH
SIZE
56
56
1
2
1008
1108
SPZ
SPZ
SPZ
63
63
63
1
2
3
1108
1108
1108
SPZ
SPZ
SPZ
71
71
71
1
2
3
1108
1108
1108
SPZ
SPZ
SPZ
75
75
75
1
2
3
1108
1210
1210
SPZ
SPZ
SPZ
SPZ
80
80
80
80
1
2
3
4
1210
1210
1210
1210
SPZ
SPZ
SPZ
SPZ
SPZ
90
90
90
90
90
1
2
3
4
5
1210
1610
1610
1610
1610
SPZ
SPZ
SPZ
SPZ
SPZ
100
100
100
100
100
1
2
3
4
5
1210
1610
1610
1610
2012
SPZ
SPZ
SPZ
SPZ
SPZ
106
106
106
106
106
1
2
3
4
5
1610
1610
1610
1610
2012
SPZ
SPZ
SPZ
SPZ
SPZ
112
112
112
112
112
1
2
3
4
5
1610
1610
2012
2012
2012
SPZ
SPZ
118
118
1
2
1610
1610
TYPE
SIZE
SPZ
SPZ
TYPE
SIZE
GROOVE
BUSH
SIZE
SPZ
SPZ
SPZ
118
118
118
3
4
5
2012
2012
2012
SPZ
SPZ
SPZ
SPZ
SPZ
125
125
125
125
125
1
2
3
4
5
1610
1610
2012
2012
2012
SPZ
SPZ
SPZ
SPZ
SPZ
132
132
132
132
132
1
2
3
4
5
1610
1610
2012
2012
2517
SPZ
SPZ
SPZ
SPZ
SPZ
140
140
140
140
140
1
2
3
4
5
1610
1610
2012
2012
2517
SPZ
SPZ
SPZ
SPZ
SPZ
150
150
150
150
150
1
2
3
4
5
1610
2012
2012
2517
2517
SPZ
SPZ
SPZ
SPZ
SPZ
160
160
160
160
160
1
2
3
4
5
1610
2012
2012
2517
2517
SPZ
SPZ
SPZ
SPZ
SPZ
180
180
180
180
180
1
2
3
4
5
1610
2012
2012
2517
2517
SPZ
SPZ
SPZ
SPZ
SPZ
200
200
200
200
200
1
2
3
4
5
2012
2012
2012
2517
2517
• Prices on request
46
TYPE
SIZE
GROOVE
BUSH
SIZE
SPZ
SPZ
SPZ
SPZ
SPZ
224
224
224
224
224
1
2
3
4
5
2012
2012
2012
2517
2517
SPZ
SPZ
SPZ
SPZ
SPZ
250
250
250
250
250
1
2
3
4
5
2012
2012
2012
2517
2517
SPZ
SPZ
SPZ
SPZ
SPZ
280
280
280
280
280
1
2
3
4
5
2012
2012
2517
2517
2517
SPZ
SPZ
SPZ
SPZ
SPZ
315
315
315
315
315
1
2
3
4
5
2012
2012
2517
2517
2517
SPZ
SPZ
SPZ
SPZ
SPZ
355
355
355
355
355
1
2
3
4
5
2012
2012
2517
2517
2517
SPZ
SPZ
SPZ
SPZ
400
400
400
400
2
3
4
5
2517
2517
2517
3020
SPZ
SPZ
SPZ
SPZ
450
450
450
450
2
3
4
5
2517
2517
3020
3020
SPZ
SPZ
SPZ
SPZ
500
500
500
500
2
3
4
5
2517
2517
3020
3030
POWER
DRIVE
TAPER BORE “SPA” SECTION PULLEYS
TYPE
SIZE
GROOVE
BUSH
SIZE
TYPE
SIZE
GROOVE
BUSH
SIZE
TYPE
SIZE
GROOVE
BUSH
SIZE
SPA
SPA
67
67
1
2
1108
1108
SPA
SPA
SPA
SPA
SPA
132
132
132
132
132
1
2
3
4
5
1610
2012
2012
2517
2517
SPA
SPA
SPA
SPA
SPA
224
224
224
224
224
1
2
3
4
5
2012
2517
2517
3020
3020
SPA
SPA
SPA
75
75
75
1
2
3
1108
1108
1210
SPA
SPA
SPA
80
80
80
1
2
3
1210
1210
1210
SPA
SPA
SPA
SPA
SPA
140
140
140
140
140
1
2
3
4
5
1610
2012
2517
2517
2517
SPA
SPA
SPA
SPA
SPA
250
250
250
250
250
1
2
3
4
5
2012
2517
2517
3020
3020
SPA
SPA
SPA
SPA
SPA
90
90
90
90
90
1
2
3
4
5
1210
1610
1610
1615
1615
SPA
SPA
SPA
SPA
SPA
150
150
150
150
150
1
2
3
4
5
1610
2012
2517
2517
2517
SPA
SPA
SPA
SPA
SPA
280
280
280
280
280
1
2
3
4
5
2012
2517
2517
3020
3535
SPA
SPA
SPA
SPA
SPA
100
100
100
100
100
1
2
3
4
5
1610
1610
1610
1615
2012
SPA
SPA
SPA
SPA
SPA
160
160
160
160
160
1
2
3
4
5
1610
2012
2517
2517
2517
SPA
SPA
SPA
SPA
SPA
315
315
315
315
315
1
2
3
4
5
2012
2517
3020
3020
3535
SPA
SPA
SPA
SPA
SPA
106
106
106
106
106
1
2
3
4
5
1610
1610
1610
1615
2012
SPA
SPA
SPA
SPA
SPA
170
170
170
170
170
1
2
3
4
5
1610
2012
2517
2517
2517
SPA
SPA
SPA
SPA
SPA
355
355
355
355
355
1
2
3
4
5
2012
2517
3020
3020
3535
SPA
SPA
SPA
SPA
SPA
112
112
112
112
112
1
2
3
4
5
1610
1610
2012
2012
2012
SPA
SPA
SPA
SPA
SPA
180
180
180
180
180
1
2
3
4
5
1610
2012
2517
2517
3020
SPA
SPA
SPA
SPA
SPA
400
400
400
400
400
1
2
3
4
5
2517
2517
3020
3020
3535
SPA
SPA
SPA
SPA
SPA
118
118
118
118
118
1
2
3
4
5
1610
1610
2012
2012
2012
SPA
SPA
SPA
SPA
190
190
190
190
1
2
3
4
1610
2012
2517
2517
SPA
SPA
SPA
SPA
SPA
450
450
450
450
450
1
2
3
4
5
2517
2517
3020
3020
3535
SPA
SPA
SPA
SPA
SPA
125
125
125
125
125
1
2
3
4
5
1610
1610
2012
2012
2012
SPA
SPA
SPA
SPA
SPA
200
200
200
200
200
1
2
3
4
5
2012
2517
2517
3020
3020
SPA
SPA
SPA
SPA
500
500
500
500
2
3
4
5
2517
3020
3020
3535
• Prices on request
47
POWER
DRIVE
TAPER BORE “SPB” SECTION PULLEYS
TYPE
SIZE
GROOVE
BUSH
SIZE
TYPE
SIZE
GROOVE
BUSH
SIZE
TYPE
SIZE
GROOVE
BUSH
SIZE
SPB
SPB
SPB
100
100
100
1
2
3
1610
1610
1610
SPB
SPB
SPB
SPB
SPB
170
170
170
170
170
1
2
3
4
5
1610
2012
2517
2517
3020
SPB
SPB
SPB
SPB
SPB
250
250
250
250
250
1
2
3
4
5
2012
2517
3020
3020
3535
SPB
SPB
SPB
112
112
112
1
2
3
1610
1610
1610
1610
1610
1610
SPB
SPB
SPB
SPB
SPB
180
180
180
180
180
1
2
3
4
5
1610
2517
2517
2517
3020
SPB
SPB
SPB
SPB
SPB
280
280
280
280
280
1
2
3
4
5
2012
2517
3020
3020
3535
SPB
SPB
SPB
118
118
118
1
2
3
SPB
SPB
SPB
SPB
SPB
125
125
125
125
125
1
2
3
4
5
1610
2012
2012
2012
2012
SPB
SPB
SPB
SPB
SPB
190
190
190
190
190
1
2
3
4
5
2012
2517
2517
2517
3020
SPB
SPB
SPB
SPB
SPB
315
315
315
315
315
1
2
3
4
5
2012
2517
3020
3535
3535
SPB
SPB
SPB
SPB
SPB
140
140
140
140
140
1
2
3
4
5
1610
2012
2012
2517
2517
SPB
SPB
SPB
SPB
SPB
200
200
200
200
200
1
2
3
4
5
2012
2517
2517
3020
3020
SPB
SPB
SPB
SPB
355
355
355
355
2
3
4
5
3020
3020
3535
3535
SPB
SPB
SPB
SPB
SPB
150
150
150
150
150
1
2
3
4
5
1610
2012
2517
2517
2517
SPB
SPB
SPB
SPB
SPB
212
212
212
212
212
1
2
3
4
5
2012
2517
2517
3020
3020
SPB
SPB
SPB
SPB
400
400
400
400
2
3
4
5
3020
3535
3535
3535
SPB
SPB
SPB
SPB
SPB
160
160
160
160
160
1
2
3
4
5
1610
2012
2517
2517
2517
SPB
SPB
SPB
SPB
SPB
224
224
224
224
224
1
2
3
4
5
2012
2517
2517
3020
3020
SPB
SPB
SPB
SPB
450
450
450
450
2
3
4
5
3020
3535
3535
3535
SPB
SPB
SPB
SPB
500
500
500
500
2
3
4
5
3020
3535
3535
3535
• Prices on request
48
POWER
DRIVE
TAPER BORE “SPC” SECTION PULLEYS
TYPE
SIZE
GROOVE
BUSH
SIZE
TYPE
SIZE
GROOVE
BUSH
SIZE
TYPE
SIZE
GROOVE
BUSH
SIZE
SPC
SPC
SPC
SPC
SPC
200
200
200
200
200
3
4
5
6
8
2517
3020
3535
3535
3535
SPC
SPC
SPC
SPC
SPC
300
300
300
300
300
3
4
5
6
8
3535
3535
3535
3535
4040
SPC
SPC
SPC
SPC
SPC
450
450
450
450
450
3
4
5
6
8
3535
3535
4040
4545
5050
SPC
SPC
SPC
SPC
SPC
224
224
224
224
224
3
4
5
6
8
3020
3535
3535
3535
3535
SPC
SPC
SPC
SPC
SPC
315
315
315
315
315
3
4
5
6
8
3535
3535
3535
3535
4040
SPC
SPC
SPC
SPC
SPC
500
500
500
500
500
3
4
5
6
8
3535
3535
4040
4545
5050
SPC
SPC
SPC
SPC
SPC
250
250
250
250
250
3
4
5
6
8
3020
3535
3535
3535
3535
SPC
SPC
SPC
SPC
SPC
355
355
355
355
355
3
4
5
6
8
3535
3535
3535
3535
4040
SPC
SPC
SPC
SPC
SPC
280
280
280
280
280
3
4
5
6
8
3535
3535
3535
3535
3535
SPC
SPC
SPC
SPC
SPC
400
400
400
400
400
3
4
5
6
8
3535
3535
3535
4040
4545
POWER
DRIVE
TAPER BUSHES WITH SCREWS
BUSH
SIZE
1008
1108
1210
1215
1310
1610
1615
2012
2017
2517
2525
3020
3030
3525
3535
4030
4040
4535
4545
5040
5050
MINIMUM BORE
MAXIMUM BORE
mm
inch
mm
inch
12
12
12
12
14
14
16
16
1/ 2”
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
22
25
30
32
38
38
38
50
7/8"
1"
1 1/4"
20
1"
60
2 1/2"
25
35
40
40
1"
1 1/2"
1 1/2"
75
75
100
50
2"
75
3"
1 1/2"
1 1/2"
2"
3"
4"
4"
100
5"
5"
• Prices on request
49
POWER
DRIVE
POWER DRIVE COUPLINGS
DRC/HRC
REFERENCE
COUPLINGS
DESCRIPTION
BUSH TYPE
DRC
DRC
DRC
DRCE
70F
70H
70S
70
TAPER BORE HUB
TAPER BORE HUB
SOLID HUB
INSERT
1008
1008
DRC
DRC
DRC
DRCE
90F
90H
90S
90
TAPER BORE HUB
TAPER BORE HUB
SOLID HUB
INSERT
1108
1108
DRC
DRC
DRC
DRCE
110F
110H
110S
110
TAPER BORE HUB
TAPER BORE HUB
SOLID HUB
INSERT
1610
1610
DRC
DRC
DRC
DRCE
130F
130H
130S
130
TAPER BORE HUB
TAPER BORE HUB
SOLID HUB
INSERT
1610
1610
DRC
DRC
DRC
DRCE
150F
150H
150S
150
TAPER BORE HUB
TAPER BORE HUB
SOLID HUB
INSERT
2012
2012
DRC
DRC
DRC
DRCE
180F
180H
180S
180
TAPER BORE HUB
TAPER BORE HUB
SOLID HUB
INSERT
2517
2517
DRC
DRC
DRC
DRCE
230F
230H
230S
230
TAPER BORE HUB
TAPER BORE HUB
SOLID HUB
INSERT
3020
3020
DRC
DRC
DRC
DRCE
280F
280H
280S
280
TAPER BORE HUB
TAPER BORE HUB
SOLID HUB
INSERT
3525
3525
POWERDRIVE DRC COUPLINGS are designed for general purpose use and have a quick and easy assembly by taper bush internal or external fitting with iteracting dog
design cushioned by rubber inserts that give a fail safe shaft connection. It will accommodate slight misalignment with eight sizes available giving nominal torque from 303150 Nm.
• Prices on request
50
POWER
DRIVE
TYRE FLEX COUPLINGS & TYRES
PART
REFERENCE
BUSH
TYPE
PART
REFERENCE
BUSH
TYPE
TF 40 F
TF 40 H
TF 40 T
1008
1008
TF 90 F
TF 90 H
TF 90 T
2517
2517
TF 50 F
TF 50 H
TF 50 T
1210
1210
TF 100 F
TF 100 H
TF 100 T
3020
2517
TF 60 F
TF 60 H
TF 60 T
1610
1610
TF 110 F
TF 110 H
TF 110 T
3020
3020
TF 70 F
TF 70 H
TF 70 T
2012
1610
TF 120 F
TF 120 H
TF 120 T
3525
3020
TF 80 F
TF 80 H
TF 80 T
2517
2012
TF 140 F
TF 140 H
TF 140 T
3535
3535
DESCRIPTION
SIZE
DESCRIPTION
POWER
DRIVE
JAW COUPLINGS & INSERTS
SIZE
L035
L035 I
JAW COUPLINGS
RUBBER INSERT
L095
L095 I
JAW COUPLINGS
RUBBER INSERT
L050
L050 I
JAW COUPLINGS
RUBBER INSERT
L0100
L0100 I
JAW COUPLINGS
RUBBER INSERT
L070
L070 I
JAW COUPLINGS
RUBBER INSERT
L0110
L0110 I
JAW COUPLINGS
RUBBER INSERT
L075
L075 I
JAW COUPLINGS
RUBBER INSERT
L0150
L0150 I
JAW COUPLINGS
RUBBER INSERT
L090
L090 I
JAW COUPLINGS
RUBBER INSERT
• Prices on request
51
POWER
DRIVE
BRITISH STANDARD B.S. ROLLER CHAIN
CHAIN
REFERENCE
06B-1 SIMPLEX
06B-2 DUPLEX
06B-3 TRIPLEX
08B-1 SIMPLEX
08B-2 DUPLEX
08B-3 TRIPLEX
10B-1 SIMPLEX
10B-2 DUPLEX
10B-3 TRIPLEX
12B-1 SIMPLEX
12B-2 DUPLEX
12B-3 TRIPLEX
16B-1 SIMPLEX
16B-2 DUPLEX
16B-3 TRIPLEX
20B-1 SIMPLEX
20B-2 DUPLEX
20B-3 TRIPLEX
24B-1 SIMPLEX
24B-2 DUPLEX
24B-3 TRIPLEX
28B-1 SIMPLEX
28B-2 DUPLEX
28B-3 TRIPLEX
32B-1 SIMPLEX
32B-2 DUPLEX
32B-3 TRIPLEX
40B-1 SIMPLEX
40B-2 DUPLEX
40B-3 TRIPLEX
POWERDRIVE chain is manufactured to BS228, ISO R606, DIN 8187 & DIN 8188. With a comprehensive range of Simplex, Duplex and Triplex Britisn Standard and
American Standard. Manufactured with hardened pins to prevent wear and stretch and also make it easy to dismantle. POWERDRIVE chain is ideally suited for tough
demanding drives in the industrial and agricultural market. ( *Heavy duty American Standard is also available for extra tough conditions).
• Prices on request
52
POWER
DRIVE
AMERICAN STANDARD A.S.A. ROLLER CHAIN
CHAIN
REFERENCE
40-1
40-2
40-3
SIMPLEX
DUPLEX
TRIPLEX
50-1
50-2
50-3
SIMPLEX
DUPLEX
TRIPLEX
60-1
60-2
60-3
SIMPLEX
DUPLEX
TRIPLEX
60-1H
60-2H
SIMPLEX
DUPLEX
80-1
80-2
80-3
SIMPLEX
DUPLEX
TRIPLEX
80-1H
SIMPLEX
100-1
100-2
100-3
SIMPLEX
DUPLEX
TRIPLEX
100-1H SIMPLEX
120-1
120-2
120-3
SIMPLEX
DUPLEX
TRIPLEX
120-1H SIMPLEX
140-1
140-2
140-3
SIMPLEX
DUPLEX
TRIPLEX
140-1H SIMPLEX
160-1
160-2
160-3
SIMPLEX
DUPLEX
TRIPLEX
160-1H SIMPLEX
200-1H SIMPLEX
• Prices on request
53
POWER
DRIVE
SIMPLEX TAPER BUSH SPROCKETS
TEETH
NO.
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
38
45
57C
76C
95C
BUSH
SIZE
BUSH
SIZE
1008
1108
1210
1210
1210
1210
1610
1610
1610
1610
1610
1610
1610
2012
2012
2012
2012
2012
2012
2012
1008
1008
1008
1008
1008
1108
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
BUSH
SIZE
BUSH
SIZE
BUSH
SIZE
1210
1610
1610
1610
1610
1610
1610
1610
1610
2012
2012
2012
2012
2012
2012
2012
2012
2012
1210
1610
1610
1610
1610
2012
2012
2012
2517
2517
2517
2517
2517
2517
2517
2517
2517
2517
2517
2517
1615
1615
1615
2012
2012
2517
2517
2517
2517
2517
2517
2517
2517
2517
2517
2517
3020
3020
3020
3020
POWER
DRIVE
DUPLEX TAPER BUSH SPROCKETS
TEETH
NO.
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
33
38
45C
57C
76C
95C
BUSH
SIZE
1008
1008
1008
1008
1008
1108
1210
1210
1210
1210
1210
1210
1210
1210
1610
1610
1615
BUSH
SIZE
1008
1108
1210
1210
1210
1610
1610
1610
1610
2012
2012
2012
2012
2012
2012
2012
2012
2012
2012
2012
2012
BUSH
SIZE
BUSH
SIZE
BUSH
SIZE
BUSH
SIZE
1210
1610
1610
1610
1610
1610
1610
1610
1610
2012
2012
2012
2012
2012
2012
1615
1615
1610
1610
1610
2012
2012
2517
2517
2517
2517
2517
2517
2517
2517
2517
2517
2012
2012
2012
2517
2517
2517
2517
2517
3020
3020
3020
3020
3020
3020
3020
3020
3030
3020
3020
3020
3020
3020
3030
3030
3525
3525
4030
2012
2012
3020
3020
3020
3020
3030
3030
3030
3030
3030
3030
3030
3030
3030
3030
3030
3030
3535
2012
2012
2012
• Prices on request
54
POWER
DRIVE
TRIPLEX TAPER BUSH SPROCKETS
TEETH NO.
Size
15, 17, 19, 21, 23, 25, 27, 30, 38, 57
3/8”,1 / 2”,5/8”,3/4”,1”
SIMPLEX PILOT BORE SPROCKETS
TEETH NO. 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,30, 31, 32, 33, 38, 57, 76, 95, 114
Size
3/8”,1 / 2”,5/8”,3/4”,1”, 1 1/4", 1 1/2” , 1 3/4", 2"
CAST IRON : SIMPLEX PILOT BORE SPROCKETS
TEETH NO. 38, 45, 57, 76, 95, 114
Size
3/8”,1 / 2”,5/8”,3/4”,1”, 1 1/4", 1 1/2” , 1 3/4", 2"
DUPLEX PILOT BORE SPROCKETS
TEETH NO. 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,, 20, ,21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 33, 38, 57, 76, 114
Size
3/8”, 1 / 2”, 5/8”, 3/4”, 1”, 1 1/4", 1 1/2” , 1 3/4", 2"
CAST IRON : DUPLEX PILOT BORE SPROCKETS
TEETH NO. 38, 45, 57, 76, 95, 114
Size
3/8”, 1 / 2”, 5/8”, 3/4”, 1”, 1 1/4", 1 1/2” , 1 3/4", 2"
TRIPLEX PILOT BORE SPROCKETS
TEETH NO. 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,, 20, ,21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 33, 38, 57, 76, 95, 114
Size
3/8”, 1 / 2”, 5/8”, 3/4”, 1”, 1 1/4", 1 1/2” , 1 3/4", 2"
CAST IRON : TRIPLEX PILOT BORE SPROCKETS
TEETH NO. 38, 45, 57, 76, 95, 114
Size
3/8”, 1 / 2”, 5/8”, 3/4”, 1”, 1 1/4", 1 1/2” , 1 3/4", 2"
• Prices on request
55
POWER
DRIVE
PLATE WHEELS
TEETH NO. 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, ,21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 33, 36, 38, 40,42, 47, 49, 52, 55, 57,60,
62, 65, 68, 70, 73, 76, 80, 95, 114
SIZE
06A, 08A, 10A, 12A, 16A, 20A, 24A, 28A, 32A
• Prices on request
56
SPECIAL APPLICATION BELTS
Profile Top : PT-0
Profile Top : PT-HC
Profile Top : PT-7
Profile Top : 2 TP
Profile Top : PT-6
Wrap Banded Belts
Cut Edge Banded Belts
Vari Speed (Wrapped)
Vari Speed (Cogged)
Aramid Cord Belts (Wrapped)
Aramid Cord Belts
(Cut Edge Cogged)
• Special application belts : Prices on request
57
STANDARD DESIGNATION FOR POLY/RIBBED V-BELTS
Size Designation :
Size - 550 J 8
550
J
8
55"
J
No. of
Effective
Length, Le
Section
Ribs
PJ
1397
No. of
PJ
1397 mm
Ribs
Section
Effective
Size - 10 PJ 1397
10
Length, Le
STANDARD DESIGNATION FOR BANDED BELTS
4 HSPB 2500
4
No.
of
Bands
HSPB
H
denotes
a
Banded Belt
2500
SPB 2500 mm
Section
Lp
4 H3V 400
4
No.
of
Bands
4 HC 350
4
No.
of
Bands
HC
H
denotes
a
Banded Belt
350
C
Section
350”
Li
58
H3V
H
denotes
a
Banded Belt
400
3V
Section
40”
La
STANDARD DESIGNATION FOR CUT EDGE VARI SPEED BELTS
Manufacturing data (BS 3733 : 1974)
Cross Sections :
Profile
HI
HJ
HK
HL
Top width
25
32
38
45
Thickness
13
15
18
20
Groove Angle 300
300
300
300
Cross Sections Nomenclature : 14 22 V 450 (Metric System)
14 22
V 450
14/16” Top Width
45” Pitch Length (Lp)
Groove Angle 220
Vari Speed
HM
51
22
300
• Standard Length Designation - Pitch Length (Lp) in mm
Cross Sections Nomenclature : 22 V 1150 A22 (S.I. System)
22
• Apart from the above standard range, the product can be
manufactured as per the range given below. However, the details
such as top width, thickness, angle or bottom width, length (Li/La/Lp,
mm/inches) are required from the customer.
V 1150 A22
Groove Angle 220
22 mm Top Width
Vari Speed
Belt Length (Li) 280 mm - 3175 mm
Top width up to 75 mm
Thickness 5 mm - 25 mm
Angle 22 - 42 (degrees)
1150 mm Effective Length
Manufacturing data (ISO 3410 : 1989 (E))
Cross Sections :
Profile
HG
HH
HI
HJ
Top width
16.5 20.4
25.4
31.8
Thickness
8
10
12.7
15.1
Groove Angle 260
260
260
260
HK
38.1
17.5
260
HL
44.5
19.8
260
HM
50.8
22.2
260
HN
57.2
23.9
260
HO
63.5
25.4
260
• Standard Length Designation - Datum Length (Ld) in mm
MINIMUM ORDER QUANTITIES
HA
Belt
Reference
HB
Minimum
Quantity
2HA
3HA
4HA
5HA
6HA
8HA
10 HA
12 - 20HA
10
6
5
4
3
2
2
1
2HB
3HB
4HB
5HB
6HB
8HB
10HB
12 - 20HB
HSPA
Belt
Reference
2HSPA
3HSPA
4HSPA
5HSPA
6HSPA
8HSPA
10 HSPA
12 - 20HSPA
Belt
Reference
HC
Minimum
Quantity
Belt
Reference
2H3V
3H3V
4H3V
5H3V
6H3V
8H3V
10 H3V
12 - 20H3V
Minimum
Quantity
2HC
3HC
4HC
5HC
6HC
8HC
10HC
12 - 20HC
10
6
5
4
3
2
2
1
Belt
Reference
2HD
3HD
4HD
5HD
6HD
8HD
10HD
12 - 15HD
10
6
5
4
3
2
2
1
HSPB
HSPC
HE
Minimum
Quantity
7
5
3
3
2
1
1
1
Belt
Reference
Minimum
Quantity
2HE
3HE
4HE
5HE
6HE
8HE
10HE
12HE
6
4
3
2
1
1
1
1
HSPZ
Minimum
Quantity
Belt
Reference
Minimum
Quantity
Belt
Reference
Minimum
Quantity
Belt
Reference
Minimum
Quantity
10
6
5
4
3
2
2
1
2HSPB
3HSPB
4HSPB
5HSPB
6HSPB
8HSPB
10HSPB
12 - 20HSPB
10
6
5
4
3
2
2
1
2HSPC
3HSPC
4HSPC
5HSPC
6HSPC
8HSPC
10HSPC
12 - 20HSPC
10
6
5
4
3
2
2
1
2HSPC
3HSPC
4HSPC
5HSPC
6HSPC
8HSPC
10HSPC
12 - 20HSPC
10
6
5
4
3
2
2
1
H3V
Belt
Reference
HD
H5V
Minimum
Quantity
10
6
5
4
3
2
2
1
Belt
Reference
H8V
Minimum
Quantity
2H5V
3H5V
4H5V
5H5V
6H5V
8H5V
10H5V
12 - 20H5V
10
6
5
4
3
2
2
1
59
Belt
Reference
2H8V
3H8V
4H8V
5H8V
6H8V
8H8V
10H8V
12 - 20H8V
Minimum
Quantity
10
6
5
4
3
2
2
1
SERVICE EQUIPMENT
PIX Length Finder
PIX Tension Tester
PIX Pulley Gauge
PIX Belt Display Stand
60
NOTES
61
CONDITIONS OF SALE
PRICES
Prices quoted are exclusive of VAT. Goods are sold at prices and conditions in force at time of delivery. All
prices quoted are subject to alteration without notice.
PAYMENT
Terms of payment are 30 days net monthly. The company reserves the right to charge an account maintenance
charge of 2% per month from the time of due payment date. All goods supplied by us remain the property of
PIX Europe Ltd until full payment is made by the purchaser.
DESPATCH
All orders are accepted on condition that in the case of extraordinary circumstances, e.g. war, upheavals,
fluctuations in the exchange rate or raw materials cost, we are entitled to cancel the order wholly or partly.
Due delivery date is conditional on no delays caused by strikes, lockouts or other force majeure. Delay in
delivery shall not entitle the buyer to any claim for direct or indirect losses or compensation or to withdraw from
purchase of goods ordered.
NOTIFICATION OF CLAIMS
No claim for goods damaged in transit and no claims regarding shortages will be entertained unless received
within seven days of receipt of invoice.
RETURN OF GOODS
Any goods which have been supplied in accordance with the buyer's order but are subsequently returned will
only be credited provided our written agreement has been obtained. The amount credited shall be 25% less
than the value at which the goods are invoiced.
BUYER'S CONDITIONS
Any conditions on the buyer's official order will not be accepted in so far as they are at variance with our terms,
unless we have formally accepted them in writing.
LAW APPLICABLE
The conditions of sale shall have effect in accordance with English law.
CORPORATE OFFICE & WORKS
PIX TRANSMISSIONS LIMITED
J-7, M.I.D.C. Hingna Road
Nagpur - 440 016. Maharashtra. India
Ph.: + 91 7104 237729, 236501-4
Fax : + 91 7014 236505/6
E-mail : info@pixtrans.com
Web Site : www.pixtrans.com
PIX EUROPE LIMITED
Unit 24, Farthing Road
Industrial Estate, Sproughton
Ipswich, IP1 5AP, United Kingdom
Ph.: + 44 1473 744312
Fax : + 44 1473 744613/14
E-mail : info@pixeuro.com
Web Site : www.pixeuro.com
SOUTH
AMERICA
PIX SOUTH AMERICA LIMITED
Rua - Agua Branca,
05065 - 110, Sao Paulo - SP
Brasil
Ph.: + 55 11 3611 - 9000
Fax : + 55 11 3611 - 3661
E-mail : marta@pixsam.com
Web Site : www.pixsam.com
GERMANY
GmbH
PIX GERMANY GmbH
Nikolaus - Otto-Str. 2
Borchen 33178
Germany
Ph.: + 49 5251 878 6003
Fax : + 49 5251 878 6009
E-mail : info@pixgermany.com
Web Site : www.pixeuro.com

Similar documents

Light Power Drive Design Manual

Light Power Drive Design Manual Dual driving surfaces allow for unique, problem solving drive designs 0.200'' (1/5'') pitch extra light (XL) PowerGrip Twin Power Timing Belt Profile/Pitch

More information