CAA Partners ONE Slide Catalog

Transcription

1
3DS.COM © Dassault Systèmes | Confidential Information | 10/29/2015 | ref.: 3DS_Document_2014
CAA ONE Slide Catalog
October 2015
AIKOKU ALPHA
• Aikoku POST for 4 Axes
Coreq
Prereq
CATIA MD1
TG1
NCG
NVG
MPG
MPA
Generates numerical control ISO code for 2 through 4 axis machines tools
•
Various 4 axis machine tools support (e.g., Rotary Table & Tilting Head, etc.)
•
Linearization and optimum feed rate of 4 axis
•
Automatic rotary table clamp
•
Production times calculation
•
Various condition verification (e.g., travel, feed rate and spindle limit)
• Aikoku POST for 5 Axes
CATIA MD1
Coreq Prereq
Last Update:
August 2014
3DS.COM © Dassault Systèmes | Confidential Information | 10/29/2015
| ref.: 3DS_Document_2014
“High quality NC data to shop floor”
Same functionalities as ‘Aikoku POST for 4 axis’ except as ‘5 axis functionality
TG1
NCG
NVG
MPG
MPA
Contact:
Yasuyuki Watanabe
+81-52-232-2666
yasu-watanabe@aikoku.com
IClick here for Industry Legend)
Partner Website:
www.aikoku.co.jp
2
AITAC
Prereq
• Smart Drawings
Coreq
Last Update:
August 2015
“From 3D to 2D for AEC, Civil Engineering, Offshore, Plant and Shipbuilding”
Productive drafting tool for Shipbuilders, Offshore and Civil Engineering
•
•
•
•
•
Industry-specific features/annotations (elevation, slope, coloring, grids, tables)
Easily create drawings according to all standards and company custom rules
Quickly create and annotate structural, piping, outfitting and all cross discipline views
Improve drawings quality, reduce user errors, user learning curve & cost
Add behaviors during view update
Powerful drawings creation batches
•
•
•
Create most of the drawings with minimum to none user interaction
Piping Isometrics, Piping Spool Orthogonal Drawings, HVAC drawings, etc.
Check, compare, review drawing versions and revisions
Contact:
Prerequisites(*)
Marc JOURNEUX
+33 (0)6 76 79 27 45
marcjourneux@aitac.nl
V6: ARM | CNV | MDG | PCS | TXO
(* )Information subject to changes. Please validate with your partner manager via mkt.partners@3ds.com
Partner Website:
www.aitac.nl
3
ALTAIR ENGINEERING
Prereq
Coreq
Coreq
Prereq
CATIA MD2
GPS
EST
FMD
FMS
GAS
GDY
Prereq
CATIA MD2
GPS
FMS
GAS
Coreq
Last Update:
August 2014
“Optimize your Concept Design”
AB3
Innovatively develop lightweight, high-performance design proposals for specific
methods-of-manufacture
•
•
Proposes better solutions based on topology, topography and gauge optimization
HyperCrash/CATIA
A tailored and automated crash modeling environment for increased productivity
and results quality
•
Automates all of the steps required to create crash and safety performance models
confog
ENOVA SmarTeam
(embed SmarTeam)
Coreq Prereq
• HyperShape/CATIA
• Altair Data Manager (ADM)
Captures, organizes and manages CAE and test data throughout the product
development enterprise
•
Provides visibility and insight into the product performance data
Contact:
Michael AROLD
+1 248 614 2400 x363
marold@altair.com
Partner Website:
www.altair.com
4
ANSYS
• FLUENT for CATIA V5
Prereq
CATIA MD2
Coreq
Last Update:
August 2014
“The Right Answer in CFD”
GPS
FMS
FMD
EST
GAS
PEO
Rapid flow modeling Dedicated to designers (non CFD specialists)
•
•
•
Automated flow volume extraction and meshing
Simulation set-up and automated solution steering
Knowledge based design optimization
Some applications…
Fluids are everywhere: air, water, oil, glass, gas, steel, yoghurt, tooth paste, cement,…
• Flows in ducts, pipes, and manifolds
• Flows around obstacles, including aerodynamics
• Heat exchangers and HVAC systems
• Automotive engine cooling and powertrain design,…
Contact:
Barbara HUTCHINGS
+1-603-643-2600 x312
bjh@anys.com
Partner Website:
www.ansys.com
5
Prereq
• aPriori CATIA CostConnect
Real-time, predictive and precise product cost assessments
Coreq Prereq
CATIA MD2
Coreq
Last Update:
August 2014
APRIORI TECHNOLOGIES
•
FTA
SMD
PX1
•
•
Evaluation of Geometric Cost Drivers (GCDs) directly from the CATIAV5 model(*)
- Ex: product's size, shape, complexity, number of holes, number of bends,
thickness, profile, all through technology
Calculation of cost in real-time, every time sourcing or design makes changes(*)
- Cost drivers evaluated on rigorous physics-based models of
manufacturing processes
Visibility into all the components of cost
- Material, labor, direct overhead, period overhead and amortized
tooling costs available for each step in the routing
Contact:
Carsten HOCHMUTH
+1 978 371 2006 x400
chochmuth@apriori.com
Partner Website:
www.apriori.com
(*)
6
based on aPriori’s patent protected technology.
ARGO GRAPHICS
• VAMOS Suite
CATIA MD1
Coreq Prereq
Last Update:
August 2014
“From press die design to die manufacturing”
XM1*
__
(*) for VAMOS
Conv. Die Entry &
VAMOS Runtime
Efficient design and manufacturing of conventional and progressive dies
•
Simplifies die design with pre-configured dies (KW) and die design specific user
interface
•
Allows easy integration of associative standard parts as well as steels, piercing
and cam units
•
Generates data for downstream processes: patterns, machining, BoM, press
simulation
•
Supports concurrent engineering through end-to-end associativities, from input
data to NC machining
IClick on the image to launch the video)
Contact:
Nobuo SUZUKI
+81-3-5641-2339
nobuo_suzuki@argo-graph.co.jp
Partner Website:
www.argo-graph.co.jp
7
AUTOFORM ENGINEERING
Coreq Prereq
CATIA HD2
_
_
Coreq Prereq
CATIA HD2
GPS
_
CATIA HD2
Coreq Prereq
Last Update:
August 2014
“We think in Sheet Metal”
GPS
HA1
• AutoForm-ProcessDesignerfor CATIA
Easy and Rapid Creation of High Quality CAD Die Faces
•
•
Creation of die layout which includes deep drawing as well as all secondary operations
Combines expertise in sheet metal forming with the effective design functionalities of
CATIA – tailored to the needs of process designers
• AutoForm-OneStepfor CATIA
Engineering of manufacturable sheet metal parts
•
•
•
Make the right choices on crucial design elements by identifying formability hot spots
Validate formability based on proposed or plausible stamping and process layouts
Assess the relative cost of design and material choices
• AutoForm-QuickLinkfor CATIA
Fast and Easy Data Exchange
between AutoFormPlus and
Contact :
CATIA
Dr. Markus THOMMA
+41 43 444 6161
markus.thomma@autoform.ch
Partner Website:
www.autoform.com
8
CADBAS
Prereq
Coreq
Coreq Prereq
CATIA MD2
• iMechX for CATIA
Automatic positioning, drilling, screwing
_
•
•
•
MTD
KT1
KWA
KWE
PKT
•
CATIA MD2 & SED
Coreq Prereq
Last Update:
August 2014
“Standardization leads to innovation”
CAI
•
Intelligent standard part and catalog libraries, including link to CV5 material-catalog
Automatic duplicate analysis
Unique part maps technology for the search of similar or duplicate parts and
assemblies by 3D-shape and any ERP/PDM-data (via interface to ERP/PDM)
Classification of company-specific parts and assemblies by automatisms
CADBAS PartExplorer/SmarTeam CAA V5-based
Bi-directional standard interface
•
•
•
•
Classification module for ENOVIA SmarTeam
Automatic generated multi-language profile cards for parts and documents
Automatic check-in of standard parts
Direct Model2CAD via PartExplorer (CopyFile-Method of SmarTeam)
Contact:
Dr. Andreas LEWANDOWSKI
+49 (0) 201 / 24723-0
cadbas@cadbas.de
Partner Website:
www.cadbas.de
9
Collaboration between CATIA V5 and ECAD authoring systems like
Coreq
Prereq
Mentor Graphics Expedition Enterprise and PADS, ALTIUM DESIGNER and CADENCE
CATIA MD1
Coreq Prereq
Last Update:
August 2014
CADCAM GROUP
“Mechatronics Collaboration Design Solution” MECODES
CBD
__
•
MECODES enables collaboration, communication and sharing of information
between design disciplines for creating electrical-mechanical products
•
MECODES facilitates engineering change processes, last-minute design changes
and version reuse to create high-quality products
•
MECODES integrates the mechanical and electronic design functions
•
•
•
•
•
•
•
Common 2D/3D library
Complete BOM for Mechatronics with mechanical /electrical parts and custom defined values
Electrical attributes and net list
Multi-boards and multilayer boards
Clearance Control and Interference checking
Revision control and ability to revert a model to a previous version
3D PCB routes, solder masks, silk screens, copper thickness, dielectric thickness
Contact:
Zlatko ŠIMUNEC
+385 -1-2016 100
zlatkos@cadcam.hr
Partner Websites:
www.cadcam-group.eu
www.mecodes.eu
10
CADNEXUS
Prereq
• CAPRI CAE Gateway for CATIA V5
CATIA MD2
Coreq Prereq
GPS
Coreq
Last Update:
August 2014
“CAD to CAE Automation”
EST
FMD
FMS
GAS
Streamlines and automates the use of complex CAD models for simulationdriven engineering analysis & design
•
•
•
•
Translation-free CAD model access eliminates time-consuming, error prone tasks
not associated with product innovation
Fully associative CAD model to ensure accuracy and persistence for automating
design studies
Feature and parameter access for optimization, DOE, what-if studies, and
incremental redesign
Flexible and scalable CAD-CAE integration for solving large design problems and
enterprise-wide collaboration
Contact:
Ali MERCHANT, Ph.D.
+1 (781) 306 0021
merchant@cadnexus.com
Partner Website:
www.cadnexus.com
11
CAXA
Last Update:
August 2014
“PLM tailored to Chinese Industries”
• CAXA PLM Solutions
A set of tools incorporating Chinese Standards
•
•
•
•
•
•
•
•
CAXA V5 NC Post Processing
CAXA V5 Chinese Tooling Catalogs
CAXA V5 3D Chinese Parts Catalogs
CAXA V5 3D Chinese Steel Standards
CAXA V5 Chinese Welding standards
CAXA V5 2D Chinese National Standards
CAXA V5 Chinese Piping Catalogs
CAXA 2D SmarTeam Integration
Contact:
Contact : Weiming YANG
+86-10-82321350 Ext. 264
rywm@caxa.com
Partner Website:
www.caxa.com
12
CD-adapco
• STAR-CAT5, STAR-CCM+ Client for CATIA V5
Prereq
CATIA MD2
GPS
Coreq
Last Update:
August 2014
“Your CAE Partner for Success”
EST
For engineers and CFD analysts
•
•
Evaluate “what-if” design scenarios quickly in CATIA V5
Direct transfer and update of models in STAR-CCM+ from CATIA V5 to drive design
changes
Industry leading CAE Technology
•
STAR-CCM+ offers the fastest and easiest process for getting accurate, dependable
answers on the most complex engineering problems
Full-spectrum CAE software and services
•
•
A single simulation file format enables collaborative and interoperable work between
Design and Analysts teams
A single license gives access to the power of STAR-CCM+
CD-adapco also offers Engineering services and training to execute the next level
of engineering analysis and implement the methods.
Contact:
James CLEMENT
+1 (248) 697-0023
James.clement@cd-adapco.com
Partner Website:
www.cd-adapco.com
13
CIDEON SOFTWARE
Last Update:
August 2015
“Engineering Software”
•
CIDEON V6 xPDM - SAP Interface
Asynchronous and bidirectional interface between 3DEXPERIENCE and SAP
•
•
CIDEON – efficient engineering.
Automates business processes between engineering and manufacturing disciplines
• Provides necessary information for planning, design, production and maintenance
• Supports PLM functionalities such as Engineering Central Parts and BOM Management
• Eliminates redundant data input
• Insures integrated change and release processes
Built on Dassault Systemes xPDM framework
• Highly scalable and reliable architecture
• Highly flexible mapping of 3DEXPERIENCE data to SAP and vice versa
• Comprehensive administration tools for easy administration and controlled synchronization
Prerequisites(*)
Contact:
Gregor KARASINSKY
+49-(0)3581-38 78-24
gregor.karasinsky@cideon.com
V6 : PCS | PDA
3DEXPERIENCE – SAP
Interface
Partner Website:
www.cideon-software.com
14
CENIT (1/3)
Last Update:
August 2015
“From innovative ideas to perfect products”
• cenitCONNECT Integration for DS V6
Multi bi-directional exchange of the relevant product data between Version 6 and SAP
•
•
•
•
•
•
Scalable solution for small, medium and large customers
Process driven system integration with bi-directional interchange of IP
Release and change objects like Maturity, Action, Engineering Record, Change Master,
Process ID, Project ID
Versioning and lifecycle synchronization
Location of “control” concept
Rule based behavior, no end user UI required for most activities
Contact:
Prerequisites(*)
DREWS, Michael
+49 711 7825-3340
m.drews@cenit.de
V6 : PCS | PDA
Partner Website:
www.cenit.com
15
CENIT (2/3)
Co Prereq
_
Co Prereq
OLP
_
DELMIA FW2
FASTTRIM
Trimming applications: Laser cutting, routing, water jet trimming, etc.
•
FASTTIP
Point-to-point robot applications: Automated riveting and multi-layer drilling
•
FASTCURVE
3D contour machining: Trimming, sealing, gluing, overlaying welding, etc.
_
_
DELMIA UPF,UPL or FP2
Co Prereq
•
_
DELMIA WL2
Co Prereq
Last Update:
March 2015
DELMIA FA2 or VT2
•
3D surfacing processes: Painting, plasma coating, shot peening, gluing, grid/sand
blasting, polishing, ultrasonic testing, etc.
_
_
Prereq
WS1N
G1
Co
CATIA MD1
_
FASTSURF
•
Contact:
FAST4AXES
Wire cutting EDM: Pre-defined and re-usable machining strategies for 2-4 axis
wire EDM machining
FETZER,Jens
+49 711 7825-3325
j.fetzer@cenit.de
Partner Website:
www.cenit.com
16
CENIT (3/3)
Co Prereq
MD1 or PLM express
_
Co Prereq
PDG
FASTTRIMSTEEL
Automated generation of die forming trimming tools
•
FASTELECTRODE
Automated creation, documentation & machining of EDM sinking electrodes
NCG
MD2 or PLM express
Co Prereq
•
_
MD2 or PLM express
•
FASTJOINT
Efficient design and administration of fasteners in CATIA
_
_
CATIA MD2
Co Prereq
Last Update:
March 2015
PX1
•
CDI V5/CAA
Secure and consistent management of all CATIA engineering data in SAP
Contact:
FETZER,Jens
+49 711 7825-3325
j.fetzer@cenit.de
_
Partner Website:
www.cenit.com
17
CIMPA
Coreq
Prereq
HD2 or SL3
SMD*
KT1
PMG
NCG
_
Coreq
Prereq
HD2 or CD3
Automatic nesting and cutting of sheet metal parts
•
•
•
Prereq
CPM*
NCG
CPE*
Automatic creation of cutting paths, drilling & riveting
Automatic creation of marking operations…
Efficient link with the production management
• PANOGEN for Composite
Automatic nesting and cutting of composite parts
CPM*
PMG
NCG
_
(*) only for
HD2
18
• PANOGEN for Sheet metal
•
•
•
HD2 or CD3
Coreq
Last Update:
August 2014
“Manufacturing process automation”
•
Automatic extraction of composite information
Automatic nesting with management of the orientation constraints (fiber direction)
Efficient link with the production management
Contact:
TapeLay
Dedicated to Forest-Liné machines
•
Automatic tape cutting (ATC) and automatic tape laying (ATL) dual optimization
Christophe COCHARD
+33 (0)5 61 18 32 86
christophe.cochard@airbus.com
Partner Website:
www.cimpa.com
COASTAL LOGIC
Prereq
• convertLogic (including ENOVIA
Coreq
Last Update:
August 2015
“PDF rendering and batch printing”
Communicator – V5/V6)
Enables regulatory compliance and document transportability by converting files
into secure, metadata stamped PDFs
•
•
•
No user interaction required
On Demand conversion and Event-driven conversion (triggered at checkin, promotion…)
100% server-based - No client-side programs necessary
• printLogic (including ENOVIA Communicator – V5/V6)
Enables regulatory compliance by automating document stamping at print time
•
•
•
“Print" button, right in the ENOVIA web interface
No viewing software or native applications needed
100% server-based - No client-side programs necessary
Prerequisites(*)
V 6: PCF | RWA
Contact:
Shaun DAWSON
+1 904-371-3038
sdawson@coastallogic.com
V5: CPF
Partner Website:
www.coastallogic.com
19
CORIOLIS SOFTWARE (1/2)
Last Update:
August 2015
“Use the force…”
• CATFiber Export CAA V6 Based
•
(add-on to CPD workbench)
Export composites plies to CADFiber standalone AFP software
• CATFiber Design CAA V6 Based
•
Manufacturability analysis for composites designers in CATIA V6 CPD
V6: CDE | CMF | CNV | PCS (for both products)
Prerequisites(*)
• CATFiber AFP-ATL Programming CAA V6 Based
•
•
Advanced composites programming in DELMIA V6
Machine-independent tool-path strategies - ATL process simulation add-on
• CATFiber AFP-ATL Machine Simulation CAA V6 Based
•
•
Advanced motion planner for both CNC machines and complex robot work cells
Machine simulation using controller emulator, post-processors
Prerequisites(*)
V6:CNV | PCS AFP-ATL Programming : + CMF | NEG | NPM AFP-ATL Simulation: + NMV
Contact:
Yvan BLANCHARD
+33 (0)2 97 59 45 26
yvan.blanchard@coriolis-composites.com
Partner Website:
www.coriolis-composites.com
20
CORIOLIS SOFTWARE (2/2)
: November 2014
Last Update
“Use the force…”
• CATFiber Export CAA V5 Based
•
Coreq Prereq
CATIA CD3 or HD2
CPM*
GPS
FMS
STL
(*) Only for HD2
Coreq Prereq
DELMIA MP2 or
CATIA CD3 or HD2
MPR**
MNV**
CPM*
_
Coreq Prereq
DELMIA WL2
MPS
MSA
MTB
DBG
(add-on to CPD workbench)
Export composites plies to CADFiber standalone AFP software
• CATFiber Design CAA V5 Based
•
•
•
•
Manufacturability analysis for composites designers in CATIA V5 CPD
Fiber simulation using material and machine constraints
Advanced lay-up surface (FE mesh) and rosette transferts
Automatic ply sectorization for optimizing lay-up paths
• CATFiber Manufacturing CAA V5 Based
•
•
•
•
Advanced composites programming in DELMIA V5
Machine-independent tool-path strategies
True fiber angle export add-on for FE Analysis (Abaqus, Nastran,..)
Trimming process simulation add-on
• CATFiber Simulation CAA V5 Based
•
•
Contact:
Advanced motion planner for both CNC machines and complex robot work cells
Machine simulation with controller emulator and post-processors
Yvan BLANCHARD
+33 (0)2 97 59 45 26
yvan.blanchard@coriolis-composites.com
Partner Website:
www.coriolis-composites.com
21
DIGITAL PROJECT
Last Update:
August 2015
“Better building through digital practice”
• Digital Project™
For architects and designers, engineers, owners, contractors, cost estimators,
fabricators, and consultants
•
•
•
Digital Project™: Designer
Digital Project™: Manager
Digital Project™: Extensions
• MEP Systems Routing
• Import Primavera Activities
• 3D models for Curved Shapes
• Advanced Parametric Control
• STL Translator, STEP Translator
• Photo Studio, Photo Studio Optimize
Contact:
Meaghan LLOYD
meaghan@foga.com
Partner Website:
www.digitalproject3d.com
22
DIMENSIONAL CONTROL SYSTEMS (1/2)
Last Update:
August 2015
“Engineering in New Dimensions”
•
3DCS Variation Analyst for V6
Manage variation across your global enterprise
Prerequisites(*)
V6: CNV | MDT| PCS
Add-on modules to 3DCS Variation Analyst for V6
•
3DCS Mechanical Variation Analyst (MVA) for V6
Variation analysis for kinematic and over-constrained assemblies (engines, gears…)
•
3DCS FEA Compliant Modeler (CM) for V6
Simulate deformation and material properties from process (clamping, welding…)
•
3DCS Advanced Analyzer and Optimizer (AAO) for V6
Contact:
John SIENKOWSKI
+(1) 248 269-9777
jsienkowski@3dcs.com
Quickly optimize and test large models for cost and quality
Partner Website:
www.3dcs.com
23
DIMENSIONAL CONTROL SYSTEMS (2/2)
Prereq
CATIA MD2
Coreq
Last Update:
Novemner 2014
“Engineering in New Dimensions”
__
FTA
DM2
DT1
RTR
•
3DCS Variation Analyst (VA) CAA V5
Simulate assembly and process variation to optimize designs
Add-on modules to 3DCS Variation Analyst CAA V5
•
3DCS FEA Compliant Modeler (CM) CAA V5
Simulate deformation and material properties from process (clamping, welding…)
•
3DCS Mechanical Variation Analyst (MVA) CAA V5
Variation analysis for kinematic and over-constrained assemblies (engines, gears…)
•
3DCS Advanced Analyzer and Optimizer (AAO) CAA V5
Optimize and test large models for highest quality and lowest cost
•
• Dimensional analysis of gap & flush conditions
• See dimensional variation and its contributors
Contact:
3DCS Visualisation Export CAA V5
John SIENKOWSKI
+(1) 248 269-9777
jsienkowski@3dcs.com
Quickly add V-Ray and high-end visualization to your models
Partner Website:
www.3dcs.com
24
DIGITAL PRODUCT SIMULATION
Prereq
Prereq
GPS
Coreq
Coreq
CATIA MD2
FMS
FMD
EST
GAS
KWE
KWA
PEO
Prereq
CATIA ME2
Coreq
Last Update:
August 2014
“Optimizing CAD-CAE integration”
25
GSD
EST
FMP
FMS
GAS
GSO
PIP
SDD
SFD
SMD
•
FEM Utilities for CATIA
Set of meshing tools and FEA gateways (NASTRAN Bulk, ANSYS Prep7)
• HexaMesh Tools
Manual, semi-automatic and fully automatic hexahedron meshing
• CATUNV5
Bi-directional FEA interface for the universal file format (IDEAS)
• MID SURFACE MESHER
CATIA-based tool for generating and meshing medial surfaces of thin
structures
Contact:
Emmanuel COLLARD
+33 (0)1 30 08 22 84
emmanuel.collard@dps-fr.com
Partner Website:
www.dps-fr.com
ELYSIUM (1/3)
Last Update:
August 2015
“Interoperability Solution Provider”
• Elysium V6 Format Converter
for NX, JT, ProE & Creo, Parasolid
High quality 3D V6 data translation with the quick ability to support
new versions as released
•
All CATIA V6 data is stored in ENOVIA V6
•
Direct translation of CATIA V6 data stored in ENOVIA V6 is realized
by using “xCAD” Component
•
V6 data translation benefits from current technical know-how that
has been achieved with Elysium experience and history of
translation with CATIA V4 and V5
Prerequisites(*)
V6: CPF | LIV | VPM (for NX Converter)
V6: CNV | PCS (for PorE &Creo)
V6: CPF | DEC | LIV | VPM | VTC | XVG (for JTConverter)
V6: CPF | DEC | LIV | VPM | XVG (for ParaSolid)
Contact:
Kentaro FUKUTA
+ 81 (53) 413-1002
marketing@elysium.co.jp
Partner Website:
www.elysium-global.com/
26
ELYSIUM (2/3)
• Elysium MultiCAx-JT Plugin
= CATIA V5 CAA to/from JT Direct Translator =
CATIA MD1
or ENOVIA DM1
or DELMIA AP2
•
Powerful Translation: Using CATIA V5 CAA toolkit and Elysium’s best-inindustry JT translation technology, massive assembly data are translated
as far as it can be imported to a CAD
•
High PDQ Guaranteed: Automatic healing runs during the translation
ensures the accurate translation and downstream reuse
•
PMI Support: Dimensions, annotations and symbols in CATIA V5 data are
translated to PMI in JT file
•
Official Provider for Daimler: Well-tuned for Daimler requirements to
ensure the accurate data exchange and wide utilization of CATIA V5 data
_
Coreq Prereq
Last Update:
August 2014
FT11
FTA1
DN11
DT12
MFT3
MDU3
(1) for CATIA
(2) for ENOVIA
(3) for DELMIA
Contact:
Kentaro FUKUTA
+ 81 (53) 413-1002
Partner Website:
27
ELYSIUM (3/3)
Elysium Direct Translator / CADdoctor (CAAV5 Adopter Products)
CATIA MD2
Coreq Prereq
Last Update:
August 2014
__
__
Direct 3D data translation and wide utilization of CATIA V5 data:
translating to multiCAx formats, as well as repairing PDQ errors, simplifying
the data for CAE analysis, verifying the data and more
•
Ease of data sharing between heterogeneous CAD/CAM and PLM systems
•
Reliable solid to solid conversion (B-rep)
•
Little or no time spent on data clean-up
•
Complete translation of product structure
•
Simple User Interface for import and export
Contact:
Kentaro FUKUTA
+ 81 (53) 413-1002
Partner Website:
28
ESI Group (1/2)
Coreq Prereq
CATIA CD3 or HD2
CPE*
or
CPM*
•
PAM-QUIKFORM for CATIA V5
•
PAM-RTM for CATIA V5
•
CPDtoESI for CATIA V5
_
Feasibility assessment for composite parts
• Prediction of the deformation of composite parts reinforcement
• Calculation of flat patterns
(*) only for HD2
Coreq Prereq
CATIA ME2
CPE
EST*
MTD
FMS
FMD
CPDworkbench
Coreq Prereq
Last Update:
December 2014
“get it right®”
CD3
Liquid Composites Molding (LCM)
• Simulation of resin injection/infusion through fibrous reinforcements
• Development of new tooling and processes for composite materials
Data transfer from CPD workbench to ESI Manufacturing Solution
• Export of XML file containing CPD data
• Automatic definition of zones and equivalent material properties based on XML
file data in PAM-RTM
Contact:
Dominique LEFEBVRE
+33 (0)1 41 73 58 00
dominique.lefebvre@esi-group.com
Partner Website:
www.esi-group.com
29
ESI Group (2/2)
Coreq Prereq
CATIA AC3 or HD2
•
PAM-TFA for CATIA V5
•
PAM-DIEMAKER for CATIA V5
GPS
KE1
KWE
CATIA HD2
Coreq Prereq
Last Update:
December 2014
“get it right®”
_
Transparent Formability Analysis (TFA)
• A dedicated solution for component feasibility and cost estimating
• Formability check of the part
• Design optimization taking into account formability constraints
Rapid die design and optimization
• Direct creation of the first draft of a die addendum within minutes
• Seamless integration of parametric tool geometry
• Powerful interactive tools and functions for part preparation, binder development
and die addendum design
Contact:
Dominique LEFEBVRE
+33 (0)1 41 73 58 00
dominique.lefebvre@esi-group.com
Partner Website:
www.esi-group.com
30
EXA Corporation
• InnerShapeDesign CAA V5 Based
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“Style to manufacturing of plastic molded parts”
FSS
Evaluate the readiness of a styling design model
•
Automatically creates a shell model based on pre-defined best practices ensuring
optimized manufacturability
•
Meet the demanding challenges in the E/E & Consumer Goods industries for the
creation of thin-walled shell parts from the styling data
GSD
Contact:
Mitsugu TAGUCHI
+81-44-540-2464
mitsugu-taguchi@exa-corp.co.jp
Partner Website:
www.exa-corp.co.jp
31
EXPI
Prereq
• Pe4 OrCAD Connector for ENOVIA V6
Coreq
Last Update:
August2015
“Bridging the gap between ECAD and PLM” pe4
Integrates Cadence ® OrCAD Design Data and processes into the ENOVIA
• Management of schematic and layout data
• Management of Bill Of Materials
• Collaboration through workspaces and projects
• Pe4 OrCAD Library Connector for ENOVIA V6
Integrates Cadence ® OrCAD CIS component data with ENOVIA
• Bidirectional synchronization of component information between OrCAD CIS and ENOVIA
• Classify ECAD components through ENOVIA processes
• New Part Introduction process support
Prerequisites (*)
V6: CNV (Pe4 OrCAD Connector)
V6: CSV (Pe4 OrCAD Library Connector)
(* ) Information subject to changes. Please validate with your partner manager via mkt.partners@3ds.com
Contact:
Patrick ESCHER
+49 7666 9445 16
patrick.escher@expi-gmbh.de
Partner Website:
www.expi-gmbh.de
32
FIVES MACHINING SYSTEMS
ACE V2 Tape Laying and Fiber Placement Composite - CAA V5 Based
Prereq
•
Brings CATIA CPD model data and Fives Machining Systems’ Advanced
Composites Environment (ACE) together
Coreq Prereq
CATIA HD2 or CD3
Coreq
Last Update:
November 2014
“Automated Composites Processing”
•
CPM*
or
CPE*
•
•
Reads native CPD design data plus optional ACE data for manufacturing outputs data
for ACE V2
CPD data & ACE data combined in a single model
Fast surface tessellation
(*) Only for HD2
•
ACE V2 Tape Laying and Fiber Placement Composite - CAA V6 Based
Prerequisites(*)
Jay HISSETT
+1 (859) 534-4639
Jay.Hissett@fivesgroup.com
V6 : CATIA CEG| CMP
Contact:
Partner Website:
http://www.fivesmsi.com/
33
CADNEXUS
FCMS
BIW-animation on a detailed
FEM-model; mesh-cut-out
converted into geometry for flexible
implementation of changes
Fast Concept Modeler for CATIA V5
CATIA HD2
Prereq
Last Update:
November 2014
“Fast Concept Modelling & Simulation”
KWA
DMN
GAS
GPS
EST
FMD
FMS
SPA
PKT
Parametric geometry creation for variant generation
FAST & EASY TO CHANGE because of simple geometric primitives
ENLARGEMENT of conventional DESIGNSPACE for optimization
rib & stiffener optimization
WIREFRAME MODEL as basis for geometry building
FAMILIAR USABILITY for CATIA users because of full CATIA CAA integration
DIRECT GEOMETRY ADAPTION through optimizers during optimization
GUARANTEED CAD-CAE ASSOCIATIVITY in using the geometry model as master model
Automatic CAE model generation for simulation & optimization loops
DIRECT DERIVATION of all CAE models (solids shells beams) from the geometry model
DRIVING the CAE – LOOP out of CATIA with geometry feedback of optimized model geometries
INTEGRATION into existing CAE environments (meshers, solvers, optimizers) – the rest (shells,
beams, solids) to be extinguished
Contact:
Dr. Werner Pohl
Tel. +49 (0) 89 411 4719-75
Mobil +49 (0) 172 1430335
werner.pohl@fcm-s.com
Partner Website:
www.contact-software.com/de/produkte/fast-conceptmodelling.html
34
FORMING TECHNOLOGIES, INC.
Coreq Prereq
Coreq Prereq
CATIA V5 MD2
GPS
•
•
GP1
_
Coreq Prereq
_
•
CATNEST
Automatically determines the optimum nesting layout for optimal material utilization
•
PROGNEST
•
Nests sheet metal blanks on progressive die strips
CATSTAMP
Evaluates tooling geometry, cost estimation and production planning
•
COSTOPTIMIZER
GPS
FMS
ESTP
EO
CATFLANGE
Accurately unfolds complex flanges and predicts stretch and deformation
_
CATIA V5 MD2
CATBLANK
Quickly and accurately develops blank shapes
FMS
EST
CATIA V5 MD1
Coreq Prereq
Update:
Last| ref.:
November 2014
3DS_Document_2014
“Cost Reduction – Guaranteed!”
Evaluates multiple costing scenarios for optimal material utilization
Contact:
Michael GALLAGHER
1-905-340-3370
mgallagher@forming.com
Partner Website:
www.forming.com
35
GALORATH
•
SEER Ply Cost Estimator (for CATIA V5)
CATIA
•
Prereq
Comprehensive composite part cost estimates
CD3
or
HD2+
CPM
•
Coreq
Last Update:
August 2014
“On Time. On Budget. As Specified.”
---
•
•
•
•
Create detailed composite part cost estimates for labor (setup, direct, inspection, rework),
material, and tooling costs
Update and refresh estimates as the design matures through the manufacturing
preparation design phase
Create and save multiple estimate scenarios for each part to compare and trade options.
Fully customizable knowledge base templates and rules to fit your factory environments,
labor rates, and processes
Publish/Save estimates as SEER cost models to be shared with SEER users for
inclusion into other estimates
CATIA users can review the estimate, even if Ply Cost Estimator and/or SEER are not
installed
Contact:
Brian GLAUSER
+1 310-414-3222, ext. 231
bglauser@galorath.com
Partner Website:
www.galorath.com
36
GEOMETRIC (1/3)
Last Update:
August 2015
“InterOp Maximized”
•
V6 xPDM Adapter for Teamcenter
Engineering and design data exchange between ENOVIA V6 and Teamcenter
•
•
•
Prerequisites(*)
Enable design and engineering processes spanning ENOVIA V6 and Teamcenter
Facilitate upgrade to CATIAV6 for users currently using CATIAV5+Teamcenter
Enable coexistence of Teamcenter and V6 based applications in an enterprise
V6: PCS | PDE
• GeomCaliper on CATIA V6
Fast, accurate and easy to use measurement tool
•
Prerequisites(*)
Locate critical thickness areas through intuitive visualization (from a strength,
manufacturing, weight reduction or material flow standpoint)
V6: CPF | LIV | VPM
Contact:
Sreekanth JAYANTI
+91 20 4028 4974
sreekanth.jayanti@geometricglobal.com
Partner Website:
www.geometricglobal.com
(*) prerequisites subject to changes – to be checked on 3ds.com Geometric webpage
37
GEOMETRIC (2/3)
Coreq Prereq
CATIA MD2
CFO
Coreq Prereq
•
GeomCaliper on CATIA V5 - Advanced
Fast, accurate and easy to use measurement tool
•
FM1
ENOVIA DER
PGW
WPE
Any
DELMI Config
Coreq Prereq
Last Update:
October 2014
“InterOp Maximized”
EPC
CEF
MCM
AP2 +
EAC
Localization of critical thickness areas from a strength, manufacturing, weight
reduction or material flow standpoint
• V5- xPDM Gateway
Process-driven exchange of design and engineering data between ENOVIA V5 VPM
and Teamcenter
•
•
Asynchronous integration with minimal user intervention
Minimum deployment time & lower deployment cost
• Manufacturing Hub Adapter
Collaborating between Design and Manufacturing domains
•
•
Contact:
Eliminating costly downstream issues early in lifecycle
Manufacturing users gain access to latest configuration data and context
Sreekanth JAYANTI
+91 20 4028 4974
sreekanth.jayanti@geometricglobal.com
Partner Website:
38
GEOMETRIC (3/3)
• eDrawings for CATIA V5 (Adopter Product)
Coreq Prereq
CATIA MD1
_
_
First email-enabled collaboration tool designed to ease the sharing &
interpretation of 2D/3D product design data
•
•
•
•
Unlimited users can easily markup and provide feedback at no cost
Secure collaboration
Compact file size facilitates email exchange
eDrawings in executable format eliminates the need to even install the viewer
• GeomCaliper on CATIA V5 (Adopter Product)
CATIA MD2
Coreq Prereq
Last Update:
October 2014
“From inception to conclusion”
_
_
Locate thin and thick sections in model (Thickness Analyzer launch button)
•
•
•
Locate critical thickness areas through intuitive visualization (from a strength,
manufacturing, weight reduction or material flow standpoint)
Generate detailed reports
Two analysis methods (Normal Ray & Rolling Sphere)
Contact:
Vinay KULKARNI
+91 22 6705 6093
vinay.kulkarni@geometricglobal.com
Partner Website:
39
GIGATRONIK
• CAIP – Computer Aided Inspection Planning
CATIA
Coreq Prereq
Last Update:
August 2014
“Electronics, information technology, consulting”
HD2
_
Validation of the geometry quality
Efficiency
• Intuitive creation of measurement plans inside a CATIA 3D-model
• Automatic geometry identification
• Automatic update in case of part modification
• Symmetrical measurement planning across several parts, including plausibility check
Collaboration
• High configurability of interchange formats (such as I++, CSV …)
• 100% ‘partner capable’ because of SOA
Contact:
Stefan HEIL
+49 89 / 353 96 80-61
stefan.heil@gigatronik.com
Partner Website:
www.gigatronik.com
40
HAPTION (1/2)
Last Update:
August 2015
“Virtual Touch”
• Motion Capture for Assembly Simulation (V6)
Interact with the 3D Mock-up using 6 d-o-f force feed-back haptic devices
 Perform assembly/disassembly validation, maintenance studies, operator training, etc.
Prerequisites(*)
V6: CNV | MAE | PCS
• Motion Capture for Human Tasks (V6)
Create and animate human models in real-time using motion tracking systems
Courtesy of Zurich University of Applied Sciences
 Simplifly validation studies such as reachability, visibility, accessibility, etc.
Prerequisites(*)
Contact:
V6: CNV | EWK | PCS
Pierre VERCRUYSSE
+33 (0)2 43 64 51 20
pierre.vercruysse@haption.com
Partner Website:
www.haption.com
41
HAPTION (2/2)
P2 Platform P3 Platform
Coreq Prereq
KIN
DM3 or DM2
FIT
SPA*
VRP*
KIN
* only if DM2
IFC Core
Coreq Prereq
FIT
SPA
HBR
• Interactive Fitting for CATIA V5 (IFC Core)
For assembly process validation, disassembly testing, ergonomics
study, operator training
•
•
MHB
MHT
Real-time motion using 6 degrees-of-freedom interaction devices
Real-time collision detection & contact simulation
• IFC Human (add-on to IFC Core)
Interactive simulation using one or several virtual operators (manikins)
•
•
DELMIA AP2
Coreq Prereq
DM2 Or MD2
Coreq Prereq
Last Update:
August 2014
“Virtual Touch”
Full-body animation using motion tracking
Automatic control of hand grasping and weight balancing
• Real-Time Interaction for DELMIA Human (RTI)
Realistic animations of manikins in real-time
•
•
Use of motion tracking in the design office or on the shop-floor
One-click recording of postures into Human Tasks
Contact:
Pierre VERCRUYSSE
+33 (0)2 43 64 51 20
pierre.vercruysse@haption.com
Partner Website:
www.haption.com
42
(
(
HITACHI LTD
Coreq Prereq
CATIA MD1
GSD
_
ENOVIA SmarTeam
SEG
Coreq Prereq
Last Update:
August 2014
“uVALUE”
_
_
• HICAD/CADAS for CATIA V5 (MSG)
Automatically generates Medial Surface, reducing analysis time for thin parts
design and analysis
•
•
•
Control of Medial Surface Shape with interactive operations
Generation of Medial Surface from complex models with rib
Automatic calculation of board thickness
Medial Surface Generator
• Design for Environment System for ENOVIA SmarTeam
Helps companies produce products with respect to environmental directives
&regulations : REACH, RoHS, EuP...
•
•
Environmental evaluation for design
Definition of business processes regarding environmental evaluation
43
chemical substance evaluation
Contact:
Yoshimitsu HIRO
cadas@itg.hitachi.co.jp
Partner Website:
www.hitachi.co.jp/products/it/industry/soluti
on/plm/products/
HUMAN SOLUTIONS
Prereq
• RAMSIS in CATIA V5
Coreq
CATIA HD2
Coreq Prereq
Last Update:
August 2014
“Movement starts on the inside”
_
For efficient integration of ergonomics in the early stages of the vehicle and
aircraft design process
•
_
•
•
•
•
•
Fast creation of realistic human figures (manikins), based on international
databases : Germany, France, USA, Canada, Mexico, South America, Japan, India,
Korea and China
High quality model display
Automatic calculation of realistic driver postures in CATIA, based on extensive
research on real drivers
Additional posture prediction models for cars, trucks, airplanes and more
Numerous functions for in-depth ergonomic analysis
Compatibility with 3D body laser scanners, for creation of individual manikins
Contact:
Anton PREISS
+49 631 303 5600
anton.preiss@human-solutions.com
Partner Website:
www.human-solutions.com
44
IGE+XAO
Coreq Prereq
CATIA MD2
EC1
_
•
SEE Electrical Harness to CATIA V5 Electrical Interface
•
•
•
Wire list import/export
Space reservation import
3D Harness import from CATIA in order to re-build complete topology of your product
Prereq
CATIA EI2 or MD2
Coreq
Last Update:
August 2014
“Shaping the future of the Electrical PLM and CAD”
ETI
EHI*
ELB*
KWA
KWE
CAI
DER
Contact:
David SABOT
+33 (0)5 62 74 36 36
dsabot@ige-xao.com
ENOVIA
Partner Website:
www.ige-xao.com
45
IMK AUTOMOTIVE
• Editor for manual work activities (ema)
Prereq
DELMIA
Coreq
Last Update:
August 2014
“Innovations methods koncepts”
AP2
EAC
MHB
MHT
_
Planning, simulation, geometrical validation and ergonomic analysis of
manual work in production processes
•
Control of Digital Human Models (DHM) by using (easy to use) complex parametric
task blocks
•
Library filled with common ready to use task blocks, which are also customizable
•
Process time calculation based on Standard Time Measurements (STM) methods
•
Simulation of the complete Manufacturing Task
•
Rating of the ergonomic level
•
Modification and optimization after the plausibility check (e. g. shift objects, change
walking paths)
Contact:
Jens TREPTE
+49 (0)371 400 97 10
jens.trepte@imk-automotive.de
Partner Website:
www.imk-automotive.de
46
INGERSOLL MACHINE TOOLS
CPM*
or
CPE*
_
Prereq
Coreq Prereq
CATIA CD3 or HD2
• iCPS/Designer - V5
Helps engineers optimize the layup of composite parts
•
•
Layup method strategy definition
Continuous surface definition , surface updating
Coreq
(*) only for HD2
Coreq Prereq
CATIA CD3 or HD2
MSA
MPS
CPM*
_
MSA
MPS
MPR
MNV
_
Coreq Prereq
DELMIA MP2
Coreq Prereq
Last Update:
November 2014
“Machines to build Machines”
• iCPS/NC Programmer and Analysis - V5
Automates the manufacturing process of composite parts
•
•
•
•
Analysis of the manufacturability of a part
Ply generation, fiber paths deviation and curvature analysis
Link with analysis to automate the update of the FEA model
Definition of automated fiber placement operation, NC data generation
• Ingersoll V6 Interface for AFP
Automated Fiber Placement for composite part manufacturing
Contact:
John DREHER
+1 815-987-6136
jdreher@ingersoll.com
Partner Website:
www.ingersoll.com
47
INTEGRA
• INSPIRER CATIA V5 plug-in
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“Hybrid light simulation software”
PHS
_
Allows users to prepare the models in CATIA and to export them to Lumicept
to simulate various lighting effects
•
•
Effects that light creates are reproduced based on the physical behavior of light
Advanced rendering capability allows high-quality reproduction of object
appearance under specified illumination conditions
Some applications…
•
•
•
•
Illuminance distribution inside facilities and outdoor spaces
Influences on visibility provided by light outside (e.g. sunlight) and inside
(e.g. room lamp) a car
Design of architectural structures with the optimized use of natural light
Visibility and emitting characteristics of automobile head and tail lights under
sunlight or road light…
Contact:
Takashi HYODO
+81 3 6273 8338
info@integra.jp
Partner Website:
www.integra.jp
48
ITI PROFICIENCY LTD.
CATIA MD2
Coreq Prereq
Prereq
• Proficiency Collaboration Gateway
Coreq
Last Update:
August 2014
“Maintain Design Intelligence”
FTA
Feature Based CAD Translation Solution
•
Migrate legacy CAD data to CATIA V5
- Support for CATIA V4, NX, Wildfire/Creo, Solid Edge, Inventor, SolidWorks
•
Preserve feature history and design intent
- Embedded IP Protection
- Automated solution MML
- Drawing translation with 3D links
ST1
•
Minimize the effort of manual completion
- Automatic solution that delivers precise and complete data
•
Deliver accurate and reliable geometry
- Validation properties feature by feature and global feature geometry fallback
•
Comprehensive reporting capabilities
Contact:
Andrew CHINN
+44 1954 234 300
andrew.chinn@transcendata.com
- Job monitoring & feature mapping reports
Partner Website:
www.proficiency.com
49
JSOL
Prereq
JMAG®
For performing electromagnetic simulations
Coreq
•
•
Accurately capture and quickly evaluate complex physical phenomena inside of
machines : motors, generators, transformers, reactosr, solenoids, actuators, etc.
Inexperienced and experinced users in simulation analysis can easily obtain
precise results
• JMAG for CATIA V5 (CAA Product)
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“It is now simple to be precise”
The top electromagnetic field analyses software, JMAG, right in CATIA
GPS
•
_
•
•
Create geometry and run electromagnetic field analysis right within CATIA
Maintain your data in a single system
Gain invaluable analysis feedback for designs with ease
Contact:
Takashi YAMADA
+81(3)5859-6020
info@jmag-international.com
Partner Website:
http://www.jmag-international.com
50
KINEO CAM
Co Prereq
MD2 or DM2 DELMIA AP2
Co Prereq
FIT
SPA
_
MSA
APS
_
•
Digital Path Planer (DPP) - for DMU Fitting /
for DELMIA DPM
V5 & V6
Automatic path planning with collision avoidance
•
Digital Path Analyzer (DPA)
V5 & V6
Aids the user in finding collision free motion paths
•
Co Prereq
WSU*
_
DELMIA AP2
MHT
MHB
_
DPP-Advanced (add-on module to DPP)
Addresses advanced disassembly uses, including magnet
paths (narrow passage booster) and workspace limits
DELMIA WL2
(*) If not
WL2
Co Prereq
Last Update:
August 2014
“Easier, Faster, Safely”
•
RPP: Robot Path Planner
V5 & V6
V5
Automatically creates collision free trajectories for a robot task
•
HPP: Human Path Planner
Contact:
V5
Automatically creates collision free trajectories for a human task
Laurent MANISCALCO
+33 (0)5 61 00 90 62
lm@kineocam.com
Partner Website:
www.kineocam.com
51
MAGESTIC SYSTEMS, INC
Coreq Prereq
ENIVIA DMU
DM3
_
• TruNEST Composites V5
For superior composite material efficiency
•
FIT
SPA
ENOVIA DMU
DM2
Coreq Prereq
Prereq
Coreq
Last Update:
October 2015
“Complete Manufacturing Management System”
_
DMO
FIT
HBR
•
Automatically nests actual ply shapes
Generates CNC Files for all cutting machines
• TruLASER View Composites V5
For use of CATIA data with Laser Projection Systems
•
•
Eliminates hard tooling and re-tooling costs associated with ply lay-up process
Improves Laser Projection quality with Advanced Path Logic (APL)
Contact:
Mike WEBER
+ 1 (201) 263-0090
mweber@magestic.com
Partner Website:
www.magestic.com
52
MAXIS-SHINTO INC.
• Maxis Cubic
CATIA HD2
Coreq Prereq
Last Update:
August 2014
“Keep and share design history”
_
_
Helps CAD designers to document modeling creation processes from
history trees of features
•
•
•
Helps communicating modeling knowledge to other CAD designers
Helps sharing the knowledge of modeling experts
Checks irregular modeling process
Key features include :
•
•
•
Convert the CATIA modeling creation processes into a text-based description in
natural language
Describe the detailed creation process
Perform searches using free text queries
(e.g shape fillets with internal edge, corners which are generated from line.1, etc.)
•
Create the correlation charts of Part Files
Contact:
Tomoyasu Saigo
+81 (0568) 25-3008
saigo@maxis-inc.com
Partner Website:
www.maxis-inc.com
53
MECAMASTER
Last Update:
August 2015
“3D Tolerancing and Loads Engineering”
•
MECAmaster 3D Assembly for V6
Functional Tolerancing definition and validation on detailed assemblies
•
Quantify tolerancing results on geometrical requirements, get information the sooner
possible on feasibility of the geometrical requirements to orient the design
•
Understand the impact and optimize tolerancing on all parts / interfaces of the
assembly, define only “just-necessary” tolerances
•
Test several technical solutions for the assembly, compare quickly the difference of
several technical solutions from a geometrical point of view
Prerequisites(*)
Contact:
V6: CNV | MDT | MKS | PCS
Pierre-Alain RANCE
+33 4 7864 3561
pierre-alain.rance@mecamaster.com
Partner Website:
www.mecamaster.com
54
MECHDYNE
Coreq Prereq
Prereq
ENIVIA DMU
DM3
_
FIT
SPA
Coreq
ENOVIA DMU
DM2
Coreq Prereq
Last Update:
August 2014
“Enabling Discovery”
_
DMO
FIT
HBR
• CDVi (CATIA Driver for Visualization and Interaction)
Enables Virtual Reality devices in V5 applications with Digital Mockup
(DMU 3 Immersive Review) features
•
•
•
•
Eliminate the risk of data porting and work directly with native data
Motion and head-tracking: intuitive insight
6DOF navigation: easier than the mouse
Virtual input technologies: wands, gloves
• Conduit for V5 (CATIA/ENOVIA/DELMIA)
Enables V5 users to operate natively on PC clusters and display in multichannel immersive visualization systems
•
•
•
Cluster platforms lower costs
Stereoscopic viewing aids depth perception
Compatible with CDVI
Contact:
Matt SZYMANSKI
+1 757-456-5500
software@mechdyne.com
Partner Website:
www.mechdyne.com
55
MENTOR GRAPHICS
Electrical and Wire Harness Design
• Capital – CATIA V5 Bridges
Coreq Prereq
CATIA MD2
ELB
EWR
_
Maintain integrity: electrical  mechanical data exchange
•
•
•
•
Exchange of wiring or physical harness description
Object linking & change reconciliation
Real time cross-probe visualization
Controllable 3D 2D flattening
• Logical Cable & TransDesign – CATIA V5 Bridges
Support legacy electrical design flows with CATIA V5 MCAD
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“The EDA Technology Leader”
GPS
_
Mechanical Analysis
Contacts:
• FloEFD for CATIA V5
Concurrent CFD: analyze as you design and speed up your workflow
Capital V5
Nick SMITH
+44 (0)7787 566627
nick_smith@mentor.com
Partner Website:
56
FloEFD V5
Keith HANNA
+44 (0)20 8487 3093
keith_hanna@mentor.com
www.mentor.com
METROLOGIC GROUP
Coreq Prereq
DELMIA IN2 or IP2
•
_
_
_
Metrolog V5
Online process inspection, drive 3D measuring machine, analyze how closely
manufactured parts compare to their CAD data, in real time
_
DELMIA IN2 or IP2
Coreq Prereq
Last Update:
August 2014
“Advanced 3D measurement”
•
•
•
•
•
Online programming of any type of 3D measuring device
Direct access to CATIA geometry and FD&T
Input program: Metrolog XG, Metrolog X4, DMIS, native V5 process
Exports measuring data in different format or native CATpart
SILMA V5
Offline process measurement planning and validation
•
•
•
Offline programming of any type of 3D measuring device
Measuring path optimization and collision detection
Post inspection analysis including reports, best fitting & additional GD&T evaluations
Contact:
Metrologic Group Sales dpt
+33 4 76 04 30 30
metrologic@metrologic.fr
Partner Website:
www.metrologicgroup.com
57
MOLDWARE
Coreq Prereq
CATIA MD2
--_
NCG
PMG
TG1
Coreq Prereq
CATIA MD2
_
_
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“On the way at speed of light …”
_
_
• MWF-Bore
Database-driven bore generator for CATIA V5
•
•
Enables to create complex multi-step holes (definition of chamfers, threads and
grooves in every hole step) incl. any important manufacturing information
Transfers directly all defined process-relevant information to the CAM module
• MWF-Assembly
Comfortable loading, managing, positioning, installing, storing standard parts
•
•
Allows to create screw- and pin connections in only a few steps
Analyses the geometry for already existing connecting holes and creates missing holes
• MWF-Drafting
Automatic drawing derivation of the holes created with MWF-Bore
•
•
Automatically numbering of the holes and mapping of the coordinate axes
Creation of hole tables with any manufacturing information (e. g., positions, threads,
tolerances) and hole sketches incl. dimensioning parameters
Contact:
Yvonne MÜNSTER
+ 49 6851 93963 12
muenster@moldware.com
Partner Website:
www.moldware.com
58
MSC.SOFTWARE
• SimDesigner Workbench Edition for CATIA
Prereq
CATIA MD2
Coreq *
Last Update:
August 2014
“Simulate to Innovate”
GPS
KIN
ANR
GAS
FMS
FMD
EST
DMO
DMN
SPA
(*) Co-req depending
on SimDesigner
Workbenches
A complete set of multidisciplinary analysis workbenches for V5 to perform
first pass simulations, what-if scenarios, and identify design flaws earlier
•
•
•
•
•
•
•
•
•
Linear static, normal modes and buckling analysis
Nonlinear structures with contact
Thermal-mechanical coupling and heat transfer
Rigid and flexible mechanisms, multi-body dynamics
Coupled motion-structures simulation
Modal analysis with ‘differential-stiffness’ dynamic analysis and modal frequency
response
Crash and drop test (Gateway for LS-DYNA)
Bidirectional access to MSC MD Nastran, LS-DYNA, and export to STEP AP209
Integration with MSC SimManager for simulation data management
Contact:
Technology Partner Program
+ 33 1 64 53 93 93
PartnerProgram@mscsoftware.com
Partner Website:
www.mscsoftware.com
Partner Website:
www.mscsoftware.com
59
MTORRES
CATIA
•
Prereq
CD3
DELMIA
•
•
•
•
CATIA
Prereq
CD3
MP2+
MPR
MNV
__
TORLAY (Tape Laying) & TORFIBERDES (Fiber Placement)
Optimizes design for production of composites parts
or
HD2 +
NCG
CPE/
CPM
•
Prereq
Last Update:
August 2014
“At the forefront of technology”
or
HD2 +
MP2
CPR/
CPM
Takes into account all the composite’s specific attributes
Creates, analyzes and optimizes design of tapes
Creates new updated surfaces as laying is going forward
Integrates manufacturing and production constraints into the design process
TORFIBERMAN
Generates automatic composite tape-laying CNC programs
•
•
•
Takes into account base surfaces, ply contours and laying orientations
Allows to define laying parameters such as scrap area, flow area, clear surface,
laying feed rates…
Produces a CNC laying program for MTorres machines to be executed with
minimal errors
Contact:
José Angel FERNANDEZ
+34 948 31 78 11
ja.fernandez@mtorres.es
Partner Website:
www.mtorres.es
60
MVI SOLVE-IT
Prereq
• CATVDA V5
Coreq Prereq
CATIA HD2
Coreq
Last Update:
August 2014
“Connecting to future”
_
Exchange of CATIA 3D geometry data to other CAD systems and to NC,
technical calculation and technical documentation
•
GSD
•
•
•
Allows to transfer CATIA-Parts, CATIA-Products as well as individually selected
parts of a model
Enables the mapping of elements types which do not exactly correspond to any
VDAFS 2.0 standard on replacement elements
Provides various translation control options and settings for process launching &
flow control
Can be launched in batch mode or included into user defined interfaces for
automated data exchange
Contact:
Frank ISSELHARD
+49 (0)8931813269
frank.isselhard@solve-it-mvi.com
Partner Website:
www.solve-it-mvi.com
61
NIHON UNISYS, LTD
Coreq Prereq
Prereq
CATIA HD2(*)
or MD2 (**)
_
_
Coreq
Last Update:
August 2014
“Next Generation Die Design & Manufacturing”
(*) HD2 pre-req for
- Die Face Design
- Formability Shaper
- Formability Filleting
- Mold Design
(**) MD2 pre-req for
- Die Structure Design
- 2.5/3D Axis Die CAM
•
Dynavista Formability Filleting
•
Dynavista Die Face Design
•
Dynavista Formability Shaper
•
Dynavista Die Structure Design
•
Dynavista Mold Design
•
High performance and robust fillet creation for complex shape
Die face specific shape creation with simplified formability check
Estimation of large deformation of panel after forming
Fast die structure creation with strong CAD/CAM integration
Fast mold die design applicable from small to large scale
Contact:
Dynavista CAM 3D Axis & Die CAM 3D Axis / 2,5D Axis
High performance 3-axis NC machining from roughing to finishing / 2,5 axis
Teruhisa KATAYAMA
+81 3 5546 5862
teruhisa.katayama@uniadex.co.jp
Partner Website:
www.unisys.co.jp/e/dynavista/
62
NTT DATA ENGINEERING SERVICES
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“Polished in decades by Japanese industries”
•
SpaceE CAA V5 Based Core & Cavity Design (Add-on and Standalone)
•
SpaceE CAA V5 Based Mold Design
•
SpaceE CAA V5 Based CAM (Add-on and Standalone)
•
SpaceE CAA V5 Based 5Axis (Add-on to Space-E CAM)
•
SpaceE CAA V5 Based Direct Translator / STEP/ GRADE
_
_
Facilitates the detail design of molded parts by providing automation for
core and cavity definition
Provides dedicated features to design associative mold structures
Allows NC programming for 3 axis machining operation
For machine tool setting, path creation, post-processing and NC
manufacturing verification
Direct bi-directional data exchange and data translation
Contact:
Junji KANAOKA
+81-3-5711-5341
kanaoka@nttd-es.co.jp
Partner Website:
www.nttd-es.co.jp
63
PITERION
•
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“Process & Innovation Excellence”
_
_
PitCon for CATIA V5
Integrates the Piterion software solution SelectBest with
CATIA V5
•
SelectBest is a comprehensive solution to develop most
customer satisfying products under given cost constraints
•
PitCon for CATIA V5 allows mapping and synchronization of
logical, geometrical and meta information from CATIA V5
(weight, parameters, dependencies, material properties, ... )
with SelectBest.
Contact:
Dieter DRAGON
dieter.dragon@piterion.com
Partner Website:
www.piterion.com
64
1/2
OPTIS
SPEOS CAA V5 Based – virtual prototyping solutions for illumination design
Co - Prereq
RT1
QSR
PEO
PHS
Co - Prereq
PEO
PKT
HBR
KWA
RT1
Co - Prereq
Co - Prereq
----
Co - Prereq
CATIA MD2
RT1
Co - Prereq
Last Update:
March 2015
“From Optics to Virtual Reality”
PH1
•
Optical Shape Design
- Freely create complex geometries for your lighting system in native CATIA format
•
Light Modeling
- Control light performance and analyze efficiency of illumination
•
Visual Ergonomics
- Visualize your products appearance with human vision ergonomics in static & real time VR environment
•
Digital Vision & Surveillance
- Improve safety thanks to reliable image acquisition to processing of sensing systems
•
Windshield Analysis
PEO
_
_
- Virtually and dynamically validate windshield’s compliance with the regulations
•
Architecture Lighting
- Optimize interior & exterior illumination of buildings and maximize use of daylight
- Create dynamic mood lighting
Contact:
Pete MOORHOUSE
+41 (0)21 693 83 70
pmoorhouse@optis-world.com
Partner Website:
www.optis-world.com
65
2/2
OPTIS
Solution for Perceived Quality analysis
Co- Prereq
CATIA MD2
•
Aesthetica
FTA
RTR
- Design your projects in the best harmony with tolerance analysis
KIN
- Review your product and ensure its clearance
Real Time solution for posture simulation and operation training
CATIA MD2
Co - Prereq Coreq Co
- Prereq
Prereq
Last Update:
March 2015
“From Optics to Virtual Reality”
HBR
FIT
AP2
Virtools Players
•
Human Integrated Manufacturing
- Experience and review virtual products, environments or assembly lines to improve ergonomics
Contact:
- Train end users in a VR system and ensure safe operation in any situation
Pete MOORHOUSE
+41 (0)21 693 83 70
pmoorhouse@optis-world.com
CTP
XEP
Partner Website:
www.optis-world.com
66
PROSTEP (1/2)
• PROSTEP V6 xPDM Adapter
for Windchill, Teamcenter, SAP & SimManager
Prereq
Last Update:
July 2015
« WE INTEGRATE YOUR PLM WORLD »
Bi-directional, process-driven synchronization of data
(BOMs and Product Structures, including files)
•
Allows the integration of V6 and 3rd-party systems with proven standard software
•
Uses standard interfaces and separates business logic making the solution more
independent from system upgrades for overall effort reduction
•
Covers typical use cases "out-of-the-box" so projects can be planned more safely
•
Reduces ramp-up times by delivering pre-configured product software
•
Benefits from PROSTEP’s integration and migration experiences as well as from
partnerships with Dassault Systèmes, PTC, SIEMENS, SAP and MSC Software
Prerequisites*
PCS | PDA
(* ) Information subject to changes. Please validate with your partner manager via mkt.partners@3ds.com
Contact:
Peter PFALZGRAF
+49 6151 9287 362
peter.pfalzgraf@prostep.com
Partner Website:
www.prostep.com
67
PROSTEP
(2/2)
• OpenPDM® V5 Connectors
Prereq
Online and offline integration of PLM data
CATIA MD1
ST1
•
OpenPDM® CATIA V5 Connector
ENOVIA VPLM VAR+(*)
•
OpenPDM® ENOVIA VPLM Connector
•
OpenPDM® ENOVIA MatrixOne Connector
PX1
-
-
ENOVIA MatrixOne
ENG
-
• OpenDXM® product suite
Coreq Prereq
Coreq
Last Update:
July 2015
« WE INTEGRATE YOUR PLM WORLD »
BOM
CAI
PEI
Transmission of engineering data (CAD documents)
from Dassault Systèmesuser interfaces
•
Secure, reliable and user friendly data transfer processes
•
Automated workflows with conversion, quality checking and notification options
•
Supporting industry related standards for data exchange (e.g. ENGDAT, OFTP, etc.)
Contact:
Joachim CHRIST
+49 6151 9287 0
joachim.christ@prostep.com
Partner Website:
www.prostep.com
68
SAMTECH
Coreq Prereq
CATIA MD2
GPS
GAS
FMS
FMD
EST
GDY
Coreq Prereq
CATIA MD2
Coreq Prereq
•
•
•
GPS
GPS
EST
•
Non-linear structure analysis with contact conditions (quasi-static behavior) to
obtain easily Von Mises stresses, plastic strains, contact pressure…
TEA Thermal CAA V5 Based
Thermal transparent extended analysis
•
FMSF
MD
EST
Perform linear static, modal, buckling, transient or harmonic response,
non-linear structural and thermal analyses
TEA Mecano CAA V5 Based
Mechanical transparent extended analysis
•
GAS
FMS
FMD
EST
CATIA MD2
SAMCEF Gateway
Driving general purpose SAMCEF FEA simulations from CATIA V5
•
GPS
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“Integrated CAE towards Professional Solutions”
Dedicated to stationary and transient thermal analysis (to obtain easily the
temperature distribution on an existing linear model built in CATIA V5)
TEA Pipe CAA V5 Based
Automotive industry oriented to analyze the best brake pipe positioning
•
Vertical application dedicated to Piping and Tubing Simulation
to prepare the placement of pipes in engines and cars
Contact:
Didier GRANVILLE
+32 43 61 69 69
didier.granville@samcef.com
Partner Website:
www.samcef.com
69
SIGMETRIX
Prereq
• CETOL 6 Sigma
Coreq Prereq
CATIA MD2
Coreq
Last Update:
August 2014
“Accelerating Design for 6-Sigma”
_
FTA
Aids engineers in performing tolerance studies, analyzing variation impact
and optimizing tolerance budgets
•
•
•
•
•
•
•
•
3D assembly variation modeling/analysis suite
Exact constraint design degree of freedom analysis including solving overconstrained conditions
Kinematic based sensitivity analysis identifying “real world” critical-to-quality
dimensions
True sensitivity animation/visualization
True “worst case” tolerance analysis
“As Designed” statistical analysis
“As Manufactured” variation analysis
Powerful, flexible analysis module that includes model editing capability directly in
the analysis window
Contact:
Alana DUMA
+1 972 542 75 17
aduma@sigmetrix.com
Partner Website:
www.sigmetrix.com
70
SIMPACK AG
SIMPACK
For simulating transient non-linear vibrations with flexible bodies, even up
into the acoustic range
•
•
Diversity and good connectivity to various control, hydraulic and FE software
Easiy integration into any manufacturer’s already-established process
• CATSIM V5 (CAA Product)
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“Leading MBS Technology for Technology Leaders”
Export of CATIA V5 data to SIMPACK
KIN
DMN
•
GPS
GAS
•
Model generation in SIMPACK is simplified by permitting users to take
advantage of already defined CATIA properties
The transferrable data include: geometries, mass properties, axes and 2D
curves
Contact:
Steve MULSKI
+49 8153 9288 41
Steve.Mulski@simpack.de
Partner Website:
www.simpack.com
71
SMARTCABLE
•
CATIA EI2
Coreq Prereq
Last Update:
August 2014
“smart solutions for wiring harnesses”
V5Harness 2D Suite
Tool chain for harness designers to build, calculate and manage harness data
_
•
Flattening (3D2D) : batch or interactive, generation of harness drawing
_
•
Design + Wiring : sketch/edit of topological structures & associated parts, rule based
routing of wires,
•
Simulation of the manufacturing process
based on knowledge base with manufacturing rules
•
Calculation : precise forecast of production costs using a knowledge base and cost
profiles (wages, resources, ..) of the sites
•
Change : automatic update of harness documentation when DMU model or E/E data
have been changed
•
Check : consistency, completeness and conformity with design rule checks assure
data quality .
Contact:
Fabian WEBER
+49 9131 49813
fabian.weber@smartcable.de
Partner Website:
www.smartcable.de
72
SYNOPSYS
Prereq
• Saber Harness Interface to CATIA V5
ELB*
EWR
Coreq
Prereq
CATIA ER2 or MD2
Coreq
Last Update:
August 2014
“Predictable Success”
(*) only for HD2
An integrated process for electrical/mechatronic system design from concept
to manufacturing
•
•
•
•
Create schematic drawings and connectivity diagrams using Saber Harness
Export component and wire, position the components and route the wires
Import the added geometrical data in Saber Harness with correct length information
Simulate electrical functions, create drawings, and generate data for manufacturing
with Saber Harness
Examples of automotive applications
•
In-vehicle networking, powernet management, drive-by-wire control, powertrain,
engine regulation etc.
Contact:
Examples of aerospace applications
•
Fly-by-wire control, power network sizing and validation, radar and flight control
computers, hydraulic power generation and distribution etc.
Paul LATIOLAIS
+1 503 547 6359
paull@synopsys.com
Partner Website:
www.synopsys.com
73
T-SYSTEMS
Last Update:
August 2015
3D Data Conversion
• COM/FOX T-Systems V6 Format Converter for JT
3D data conversion using JT format for vertical Apps & PDM collaboration
•
Improvement of the competitiveness by closed process chains and unique
approach within the design processes
•
Improvement of the product quality by continuation of work on model results with
CATIA V6 without problems
•
Low system costs by smooth exchange of 3D geometry with CATIA
•
Improvement of the collaboration with partners
Prerequisites(*)
V6: CPF | LIV | VPM
Contact:
Oliver QUAK
+49 40 53 95 1923
Oliver.Quak@t-systems.com
Partner Website:
www.t-systems.com
74
T-SYSTEMS
Coreq Prereq
CATIA MD1
or ENOVIA DM1
or DELMIA AP2
_
_
Any CATIA
Design Config
Coreq Prereq
Last Update:
August 2015
3D Data Conversion
• COM/FOX: T-Systems V5 MultiCAx-JT Plug-in
3D Data Conversion using JT format for hybrid product design purpose
•
•
•
• COM/VDAFS CAA V5 Based
Bi-directional data conversion to VDAFS neutral format
(points and point sets, 3D curves, sculptured surfaces and trimmed surfaces)
_
_
Interactive integration within the V5 Import / Export command and MultiCAD mode
Integration in batch capabilities (Translator & Multicad mode)
Integration as a component of COM/FOX infrastructure with files inputs & outputs
•
•
Interactive integration within the within the CATIA session
Batch call interface with JAVA user interface outside the interactive CATIA session
Contact:
Oliver QUAK
+49 40 53 95 1923
Oliver.Quak@t-systems.com
Partner Website:
www.t-systems.com
75
TATA TECHNOLOGIES
Prereq
• i CHECK IT For CATIA V5
CATIA MD2
Coreq
Coreq Prereq
Last Update:
August 2014
“Improving productivity through Product Data Quality”
_
_
Real-time, rule-based checker to automate compliance of the best
practices & design methodologies
•
•
•
•
•
Improves design productivity by reducing time wasted on repetitive tasks
Eliminates inaccurate designs by automating compliance with defined
standards
Reduces engineering change orders by significantly reducing design errors
Provides on-the-job training by the integrated and customizable help system of
I CHECK IT
Allows outsourced or contract designers to design effectively by utilizing
corporate standards in I CHECK IT
Contact:
Dan MILES
248-426-1750 EXT2650
Dan.Miles@tatatechnologies.com
Partner Website:
www.tatatechnologies.com
76
TDCI
• PrescientQA CAA V5
Coreq Prereq
CATIA MD2
_
_
ENOVIA SmarTeam
TDM
Coreq Prereq
Last Update:
August 2014
“driving product quality”
_
_
Enables CATIA users to define and apply standards and practices for
modeling and engineering design
•
•
•
•
•
Identify problems early in the design process
Ensure consistency and conformance to the company's standards and best practices
Enhance data interoperability throughout downstream applications
Ensure "clean" legacy design data
Enable high-level management overview of data including distribution of quality and
financial impact
• PrescientQA Smarteam Integration Module
Orchestrates the activity of checking product model integrity within a
formalized business process
•
•
PrescientQA called by workflow steps set up within SmarTeam
PrescientQA benefits from inbuilt SmarTeam logging and reporting capabilities
Contact:
Rob TAILFORD
+44 (0) 1327 872435
rob.tailford@tdcilimited.co.uk
Partner Website:
www.prescientqa.com
77
TDM SYSTEMS
Prereq
_
Coreq
CATIA RM2
_
• TDM CAM-Integation
•
Support the processing technologies of turning, drilling, milling
•
Online database access from the CATIA environment
• TDM CAD-Solidconverter
•
The 3D Solid Converter generates for rotating and stationary tool assemblies
(turning, drilling, milling) special step-Files to simulate in CATIA (incl. material
removal simulation)
Prereq
CATIA MD1
Coreq
Last Update:
August 2014
“Tool Data Management Systems”
_
AMG
LMG
MPA
MSG
NCG
PMG
SMG
• TDM ToolGraphicBuilder CAAV5 Based (TGB)
•
Creation of a 3D-solid of the assembly in CATIA V5 with identification of cutting
and non-cutting-parts for rotable tools
Contact:
Thomas Mücke
+49.7071.9492-1439
thomas.muecke@tdmsystems.com
Partner Website:
www.tdmsystems.com
78
TECHVIZ
Co / Prereq
CATIA MD2
or any CATIA P2
Config
_
_
Co / Prereq
ENOVIA DM2
_
_
DELMIA DOM
or any DELMIA
P2 Config
Co / Prereq
Last Update:
August 2014
“Accelerate and display your 3D application”
_
_
• TechViz XL CATIA Connector
Display large 3D data sets directly in your native application
•
•
•
•
on any type of stereo 3D display,
with a high frame rate,
without any limitation for resolution, size, shape or performance.
without any data conversion or data loss.
Switch to another level of experience
•
•
•
•
•
•
Choose any screen size, any kind of immersive display
Display in 1:1 scale or greater
Manipulate model data by simply pointing
Interact with your 3D scene in an immersive mode
Maximize the use of your 3D models
Improve your understanding of the 3D data
Contact:
Alexis VARTANIAN
+33 (0)1 55 03 00 66
avartanian@techviz.net
Partner Website:
www.techviz.net
79
THEOREM SOLUTIONS (1/3)
Last Update:
August 2015
“Multi-CAD Data Access”
• Theorem Format Converter for : JT, NX, Creo Parametric – V6
Direct use of data between V6 and JT / NX / Creo Parametric
•
Read and write data to and from V6
•
Integration within the V6 environment enables bi-directional file and PDM
collaboration scenarios
•
Use of V6 converted data makes collaboration withing the supply chains with
mixed V6, JT, NX and Creo Parametric environments more effiicient
•
Ability to convert JT, NX and Creo data into the 3DXML file format allows to use
data with CATIA, DELMIA, SIMULIA, ENOVIA, 3DVIA and 3DSWYM
Prerequisites(*)
Europe & Asia Pacific: Don PHILLIPS
+44 1827 305 350 - sales@theorem.com
Americas: Ellen ALARIE
+1 513 576 1100 - sales-usa@theorem.com
V6: CNV | PCS
Contact:
Partner Website:
www.theorem.com
80
Prereq
Any CATIA V5,
ENOVIA VPLM
DELMIA V5
Config
Coreq
Coreq
Prereq
Last Update:
August 2014
“Multi-CAD Data Access”
_
FT1*
FTA*
DT1*
MFT*
• Theorem Solutions Multi-CAD plug-ins:
NX, Creo Parametric, JT 3DXML - V5
Design in context for the CATIA V5 user
•
•
•
* Co-req for
Pro/E plug-in
Where “insert existing component” opens non-CATIA data in a CATIA V5 session
CATIA V5 maintains / manages links with the inserted non CATIA parts or assemblies
Enables update to be performed if the non CATIA V5 files or assemblies are modified
• JT 3DVIA Composer - V5
Direct database converter between the JT file format and 3DVIA Composer
• MicroStation for CATIA V5 CADverter - V5
Direct translation of DGN data into the CGR/CATpart/CATproduct format
Contact:
Partner Website:
www.theorem.com
81
• CATIA V5 / CADverters (CAAV5 Adopter Products)
CATIA V5
Coreq Prereq
Last Update:
August 2014
“Product Data Exchange”
_
_
Allow direct conversion of data including solid models, assembly, product
structure data and attributes
•
•
•
•
•
•
•
•
CATIA V5 < > Creo Parametric CADverter
CATIA V5 < > Unigraphics NX CADverter
CATIA V5 > JT CADverter
CATIA V5 < > Parasolid CADverter
CATIA V5 < > CADDS 5 CADverter
CATIA V5 < > ICEM Surf CADverter
CATIA V5 < > I-DEAS NX CADverter
CATIA V5 > CreoView CADverter
Contact:
Partner Website:
www.theorem.com
82
TORAY ENGINEERING
3D TIMON ®
Injection Molding CAE System born in Japan
•
Prediction of problems and prior verification of processes relating to the
development and production of plastic products
• TIMON for CATIA V5 (CAA Product)
CATIA
Coreq Prereq
Last Update:
August 2014
“CAE Way to Go !”
MD2
ME2
Interface module from TIMON to CATIA
•
•
FMD
•
Enables 3D TIMON to operate in a CATIA V5 enviroment by applying several settings
Enables to reuse or save past created sprue and runner arrangement by using "powercopy" function.
Combination of TIMON for CATIA V5 and 3D TIMON can be flexible with design
changes, such as shape change
Contact:
Kei Uenaka
+81-3-3241-1541
kei_uenaka@toray-eng.co.jp
Partner Website:
www.toray-eng.com
www.3dtimon.com
83
TRACEPARTS
Prereq
• TraceParts CAA V5 Based
CAD parts libraries, electronic catalogs and product configurations
Coreq Prereq
CATIA MD1
Coreq
Last Update:
August 2014
“100+ million 2D/3D CAD drawings at just a mouse click”
•
The only Parts Library in the world to benefit from the “Software Partner”
status and to be promoted on PLM Market Place
•
Seamless integration with CATIA V5: publications, threading parameters, bill of
materials attributes, materials data, electrical properties for connectors
•
Extensive library of commercial parts from 200+ manufacturers’ catalogs:
_
ELB
ASCO JOUCOMATIC NUMATICS, BOSCH, INA, LEGRIS, SNR, TRELLEBORG…
and standards (ISO, NAAMS, NAS, MS, BS, DIN, ANSI, NF…)
> 100+ millions of components
•
Powerful search engines, 3D viewer and product classifications (ISO ICS,
ecl@ass,…)
Contact:
Gabriel GUIGUE
+33 (0)2 32 79 44 38
gg@traceparts.com
Partner Website:
www.traceparts.com
84
TTI
• Acc-u-Trans CATIA V5 Interface
CATIA MD1
Coreq Prereq
Last Update:
August 2014
“When the quality of the translation counts. Count on TTI.”
_
_
TTI's patent pending Acc-u-Trans Interoperability Engine allows you to :
•
•
•
•
Share 3D MCAD models seamlessly across multiple CAD platforms
Translate fully modifiable features with feature history
Resolve issues during translation providing every feature in the translated file and a
tree that updates without error
Verify target model accuracy through geometric and mathematical comparisons
An interoperability process consisting of 5 distinct stages
•
•
•
•
•
Design intent source analyzer
Native-to-native geometry converter
Mirror model comparator
Operator assisted conversion
Final QA check
Contact:
Tim BODEN
+1 (509)358-2039
tboden@translationtech.com
Partner Website:
www.translationtech.com
85
TRANSCAT PLM
Prereq
• CAVA V6
Solutions for car design and legal compliance
International rules, norms and standards are provided during the entire design
process - from the concept phase to the homologation
Coreq
Last Update:
August 2015
“Solutions for Process Compliance”
•
•
•
•
•
•
CAVA OVA: Overall Vehicle Architecture, e.g. curbstone clearance
CAVA Vision: Field of view, interior and exterior mirrors
CAVA Safety: Passenger and pedestrian safety
CAVA Manikin: Passenger positions with a SAE dummy
CAVA Wiper: Simulating wiper geometry
CAVA Tools: CAVA Silhouette - 2D Projection of geometry outlines
Contact:
Prerequisites(*)
V6: CNV | MES | PCS
Martin NOELLE
+49 8921 89 60114
mnoelle@transcat-plm.com
Partner Website:
www.transcat-plm.com
86
TRANSCAT
Prereq
HD2
_
Coreq
Coreq Prereq
CATIA
For xCompare & VDAFS
Coreq Prereq
CATIA
• CAVA V5
Solutions for car design and legal compliance
Includes CAVA OVA(Overall Vehicle Architecture), CAVA Vision,
CAVA Manikin, CAVA Safety and CAVA Wiper
• xCompare
Solution for handling model modifications
HD2
_
• VDAFS-Processor
Bidirectional CATIA V5 / VDAFS Interface
CATIA
Coreq Prereq
Last Update:
November 2014
“Solutions for Process Compliance”
MD1+
PX1
_
Contact:
• XFileV5
Martin NOELLE
+49 8921 89 60114
mnoelle@transcat-plm.com
Exchange of consistent CATIA V5 data
Partner Website:
87
TRANSCAT
• ENOVIA SmarTeam - Pro/ENGINEER Integration (ESPI)
CATIA
Coreq Prereq
Last Update:
August 2015
“Made in software”
MD1
_
Manage easily and safely Pro/ENGINEER and Creo data within ENOVIA
SmarTeam
•
Seamless integrated, rapidly implemented document management tool
•
Simple, effective and comfortable administration of Pro/E and Creo documents
•
Powerful functions to assist in building assemblies
•
Advanced searches, revision management and preview of documents without
having to open Pro/ENGINEER or Creo
•
Migration of legacy data managed by Pro/INTRALINK to the SmarTeam database
with Pro/INTRALINK to SmarTeam Migration (ISM)
Contact:
Roman Lisican
+421 903 717 701
sales@menang.eu
Partner Website:
88
TYPE 3 (GRAVOTECH GROUP)
Prereq
• Type3 Graphic CAAV5 Based
For the 3 Type3
products
Coreq
Coreq Prereq
Last Update:
August 2014
“Type3CAAV5 is the unique add-on solution for
the easy and seamless integration of text and graphics in the PLM process”
CATIA MD1
_
_
Complete text editor (true type fonts, associativity...) and Scan & vectorization
of logos (BMP, B&W or colors)
• Type3 Graphic & Wrap CAAV5 Based
Features of “Graphic package” and Mapping & Projection of texts & logos on to
3D shapes
• Type3 Gateway CAAV5 Based
Copy & paste between TypeEdit (stand alone solution of TYPE3) & CATIA
offering access
•
Drawings, 3D bas-reliefs, CAM, and any professional engraving functionalities
Contact:
Philippe BLACHE
+33 (0)4 74 70 80 00
catia@type3.com
Partner Website:
www.type3.com
89
VISTAGY
• Fibersim
Coreq Prereq
CATIA HD2
For designing and manufacturing composite parts
•
_
•
_
•
Integrate the entire composite engineering process from structural specs to
manufacturing and quality
Support multiple design methodologies including ply-based, zone-based and
structure-based design
Quickly generate flat patterns, laser and other manufacturing data for complex
parts in minutes
• Seat Design Environment™ (SDE)
CATIA HD2
Coreq Prereq
Last Update:
August 2014
“Imagine. Create. Deliver...”
_
RTR
IMA
For designing and manufacturing seat trim covers and interior parts
•
•
Enable engineers to capture a single-source master model of the seat or
interior trim
Define all trim details including materials, sew lines, seam allowance and
notches, attachments, heating pads, occupant sensors
Contact:
Olivier GUILLERMIN
+1 781 250 6892
olivier.guillermin@vistagy.com
Partner Website:
www.vistagy.com
90
WILCOX ASSOCIATES
• PC-DMIS CATIA V5 Direct CAD Interface (DCI)
CATIA MD1
Coreq Prereq
Last Update:
August 2014
“Driven by precision”
_
_
Generates part programs, evaluates measurement results and generates
inspection reports
•
•
•
•
Eliminates translation with direct use of the CATIA geometry data and GD&T
information
Maintains the original design intent throughout the measurement process
Maintains links between the CAD model, the inspection plan and the measurement
program(s)
Runs any brand or style of Coordinate Measuring Machine (CMM), maximizing its
productivity in the process
• PC-DMIS CAD++
Provides sophisticated tools for high speed scanning, sheet metal measurement,
part alignment, and many more precision measurement functions
Contact:
Ken WOODBINE
+1 (847) 343-3599
Ken.Woodbine@HexagonMetrology.com
Partner Website:
www.pcdmis.com
91
Last Update:
August 2015
XPLM SOLUTION (1/2)
ENOVIA V6 - Oracle EDM Connector
•
Integrate product and project data, workkflow and business processes
•
From ENOVIA V6 Design Engineers can synchronize data with Oracle EDM
•
Oracle EDM manages the release process
•
BOM and Product Structures are synchronized within Oracle EDM and managed
within a large context of multiple authoring systems
Prerequisites*
•
V6: PCS | PDV
3DEXPERIENCE xPDM Adapter for Oracle PLM Agile
•
Contacts:
Europe: Karl-Heinz Dahley
+49 351 82658-96
karl-heinz.dahley@xplm.com
Same features as Oracle EDM Connector
Prerequisites*
V6: PCS | PDA
USA and RoW: David Turcotte
+1 508 753-7500
david.turcotte@xplm.com
Partner Website: www.xplm.com
92
Prereq
CATIA
•
MD2
or
SA2
or
PM2
+PX1
CATIA
Coreq Prereq
Last Update:
November 2014
XPLM SOLUTION
HD2
CATIA V5 Connectors (based on J2xPLM Platform)
for Aras Innovator – Infor PLM – Oracle PLM – Oracle EDM
Provides control over CAD data
•
•
•
•
•
(2/2)
Full support for release processing
Easy PLM access for functions such as loading or saving of CAD data
High security through the use of robust PLM role and privilege functionality
Automated bi-directional transfer of properties between CAD and PLM
RENgo
Supports the CATIA-design engineer in observing naming conventions
•
•
Guarantees own or default naming conventions through rule-based automation
Offers high degree of time saving and reliability for name adjustments
Contacts:
Europe: Karl-Heinz Dahley
+49 351 82658-96
karl-heinz.dahley@xplm.com
USA and RoW: David Turcotte
+1 508 753-7500
david.turcotte@xplm.com
Partner Website: www.xplm.com
93
ZUKEN
Prereq
ELB
EWR
EHI
_
CATIA DI2
Coreq Prereq
Coreq
Coreq Prereq
CATIA EI2 or MD2
EWR
_
CATIA MD2
Coreq Prereq
Last Update:
August 2014
“Bridging the gap between electronic and mechanical”
CBD
_
• Cabling Designer Integration module CAA V5 Based
Bi directional interface Cabling Designer / CATIA V5
•
•
•
Enables database sharing and bi-directional communication for design editing
Handling variant information
Linking with verification and simulations
• Cabling Designer CAA V5 Based
Integration of Cabling Designer into CATIA V5
•
•
Wire harness systems of vehicles hierarchical management
Electrical harness diagram on CATIA V5
• Board Interchanger for CATIA V5
Link between “Electrical PCB design” and “Mechanical Chassis design”
•
•
Verifies clearances in a true 3D environment
Provides easy 3D PCB modeling with accuracy
Contact:
Mamoru HIRAYAMA
+81 (0) 45 942 1511
m-hirayama@zuken.co.jp
Partner Website:
www.zuken.co.jp
94
95
3DS.COM © Dassault Systèmes | Confidential Information | 10/29/2015 | ref.: 3DS_Document_2014

CAA Partners ONE Slide Catalog

Transcription

Similar documents

Virtools Dev Overview

for the BEAUTY INDUSTRY

Hanil E-hwa

How to install 3ds Max plugin to Intericad?

Benetton Group - Design Systems

How to decrypt 3ds ROM`s

Evernham Motorsports

World neWS AMERICAS

JLS

Plasan Carbon Composites