TD516 Tracked Trommel Screener - Technical Spec

Transcription

ANACONDA EQUIPMENT INTERNATIONAL
Ardboe Business Park, Kilmascally Road,
Dungannon, Co. Tyrone BT71 5BJ
Tel: (028) 867 37878 – Fax: (028) 867 36675
1|Page
TD516 TRACKED TROMMEL SCREENER
TECH SPECIFICATION
REV02
The TD516 is a compact trommel screen and stockpiling unit designed for urban
and entry level users. The TD516 is robust and economical to run and can
screen/stockpile 2 products. Its portability allows it to work in confined spaces and
also where larger, heavier screens would find it impossible to manoeuvre. The
TD516 consists of a crawler track base, variable speed feed conveyor, 1.35M x 5.15M
Trommel drum, powerunit, and 2 integral variable speed stockpiling conveyors. It
has a pendant remote control system or can be operated by radio remote control if
desired.
FEATURES
•
•
•
•
Total weight
Drum Diameter
Drum Length
Powerunit Diesel Hydraulic with Deutz TD2011
14500kg
1.35M (4’5”’)
5.15M (16’x9”)
POWERUNIT
- Water cooled JCB444 Tier 3 developing 63kW (84HP) OR
- Air Cooled engine : TD2011 L04i DEUTZ 58kW (74 Hp)
sales@anacondaequipment.com - www.anacondaequipment.com
All Specifications subject to change without prior notice
Tel: (028) 867 37878 – Fax: (028) 867 36675
2|Page
TECH SPECIFICATION
ADVANTAGES
• Quick set up time typically under 15 minutes
• Capable of processing up to 60TPH
• Variable speed 3 ply belt feeder
• Hydraulic folding discharge conveyor
• High performance hydraulic 4 wheel drive system
• Tracks into/out of container without removing any parts
• Optional Tipping Grid
• Brush tensioning at ground level
• Variable angle chassis (0-4 degrees)
• Quick change drum / mesh system
APPLICATIONS
•
•
•
•
•
Compost
Topsoil
Wood Chip
Construction & Demolition Waste (C&D Waste)
Ash
FEED HOPPER / FEEDER CONVEYOR
The feed hopper is 3.2 m³ with 3 ply 950mm (36”) wide variable speed belt.
TROMMEL DRUM
A high performance 1.35M x 5.15M (5’x16’) Trommel Drum featuring 4 lifter bars and 3 wrap
around mesh sections that are bolted to the outside of the drum for ease and speed of
changing. The drum also lifts completely out of the chassis for changeover. The drum angle
is adjustable from 0 to 4 degrees and has 3 brush sections for cleaning the meshes.
DRIVE
Self contained engine, with aluminium and cast iron hydraulic pumps, and cast iron motors.
Tel: (028) 867 37878 – Fax: (028) 867 36675
3|Page
TECH SPECIFICATION
ENGINE
POWERUNIT
- Water cooled JCB444 Tier 3 developing 63kW (84HP) OR
- Air Cooled engine : TD2011 L04i DEUTZ 58kW (74 Hp)
CONVEYOR DETAILS: FEEDER BELT
Conveyor Belt: Control: -
CONVEYOR DETAILS: TAIL BELT
Conveyor Belt: Stockpiling Height
CONVEYOR DETAILS: FINES BELT
Conveyor Belt: Control: Stockpiling Height
CONVEYOR DETAILS: COLLECTION BELT
Conveyor Belt: Control: -
3 ply 950mm (36”) wide
Variable Speed Control
2 ply 900mm (36”) wide
2.65M
Chevron 650m (26”) wide
2.50M
3 ply 1050mm (42”) wide
Tel: (028) 867 37878 – Fax: (028) 867 36675
4|Page
TECH SPECIFICATION
HYDRAULICS:
Hydraulic Pump:
Ultra Type 463333
Hydraulic Motors:
Wheel Motor – OMT500
Feeder – Bonfiglioli 805W/OMSS160
Tail Conveyor – OMT630
Collection Conveyor – OMT500
Side Conveyors – OMT315
Control Valve:
Nimco CV601 (1) Nimco Close Coupler (2) Nimco CV111 (2)
Nimco CV691 (2) Nimco CV112 (2)
Nimco CV791 (2)
Recommended Hydraulic Oil
0 Deg. C - 30 Deg. C ambient temp, Shell Tellus 46 (or equivalent)
+ 30 Deg. C ambient temp, Shell Tellus 100 (or equivalent)
Tel: (028) 867 37878 – Fax: (028) 867 36675
5|Page
TECH SPECIFICATION
CRAWLER TRACK DATA
•
•
•
•
Tractive Effort
Gradability Percentage
Gearbox Ratio
Approximate Speed
61,276 daN
38.3
114.6:1
0.4 Km/hr
WORKING DIMENSIONS
•
•
•
Length:
Width:
Height:
13.040M
7.116M
2.925M
TRANSPORT DIMENSIONS
•
•
•
Length:
Width:
Height:
11.60M (38’7")
2.3M (7’7")
2.53M (8’5")
Tel: (028) 867 37878 – Fax: (028) 867 36675
6|Page
TRANSPORT DIMENSIONS
Tel: (028) 867 37878 – Fax: (028) 867 36675
7|Page
WORKING DIMENSIONS - SIDE + END VIEW

TD516 Tracked Trommel Screener - Technical Spec

Transcription

Similar documents

Speedway conveyors 2 - Speedway Packaging Machinery Inc.

Overbuilt to Out perform OVERBUILT TO OUTPERFORM

BestFlex 300 Gravity Skatewheel Conveyor Brochure and product

Rotary Trommel Screens

Model TF Shaftless Screw Conveyor

Self-cleaning process

Dynamic 885 - Lynn Hendrix Equipment

Manufacturing Operations - Pacline Overhead Conveyors

trommel screen line

Design Models of Trommels for Resource Recovery Processing