RIDI Green Box A4 8S_en_int_Layout 1 - ridi

Transcription

The complete answer
Energy-efficient lighting control
Efficient louvre materials
Simple installation
For 600/625 modular ceilings
Complete package of square luminaires for modular ceilings
in a variety of sizes: 2-axis, 3-axis and 4-axis.
Illuminance
group 2 (daylight dependent) +30%
100
100
80
40
Illuminance
group 1 (daylight dependent)
%
100
70
50
10
3-phase mains or 4-phase mains + pushbutton
Simple installation using the linect plug-in system
The luminaires are fitted with the Linect
connection system for maximum ease of
installation:
%
-
se
+
ha
-p
Presence / daylight sensor and control unit
integrated in the master luminaire.
2
Slave
Group 2
Presence sensor: With a pick-up range of 4 m x 4 m, the sensor
responds to even minor movements. Increasing the pick-up range
to 5 m x 6 m extends the detection field for larger movements.
The pick-up range can be increased using upgrade sensor
DALI-AL-PIR.
Master
Group 1
Slave
Group 1
Slave
Group 2
Sensor alignment
Installation
Minimal planning work required
Short installation times
Simple lay-in mounting of luminaires in
modular ceilings
Foolproof installation as luminaires are
connected from the outside using a
coded connector
No need to open the luminaire
Connecting cables, T-junctions, plugs
and sockets are all included.
max. 3,5m
6m
5m
Pushbutton
optional for
manual
operation
6m
5m
Daylight sensor: The system is set in the factory for a nominal
illuminance of 600lx with 30% reflection. The sensor actuates two
different luminaire groups. Luminaire group 2 is controlled with a
30% offset relative to group 1, which is located nearest to the window.
Individual adjustments are possible using optional DALI-AL-FB1/FB2
remote control units.
Depending on the degree of daylight and on the presence of a
person in the room, the lighting system can be controlled in
two different operating modes using the RIDI Green Box basic
components:
* Average electricity price = 1.18 € p.a.
Cost savings per annum appr. 100€
Highly efficient lighting technology due to use of silver-coated
aluminium (MIRO SILVER) for the louvre and top reflector material
with a total light reflection factor of 98%.
88,3
71,4
50%
100% Energy savings
With presence detection +
daylight detection/deactivation
Savings of up to 75% due to:
Highly efficient louvre and mirror material
Presence-dependent control
Daylight-dependent control
24%
Eta_LB
0%
Actuation takes place through the master luminaire for up to
7 additional slave luminaires in 2 groups for different levels
of brightness on the window / corridor side depending on the
daylight control setting.
The master luminaire must be positioned as part of
luminaire group 1 on the window side.
For presence detection, the master luminaire must also be
placed in proximity to the desk or workstation.
Standard
Aluminium SG
Top reflector SG – specular
With daylight detection/
deactivation
Single office
2080
Medium
0,18
TLD / EVG-DALI
2
2
70 (4x18w)
1
175 kWh p.a.
32 € p.a.*
With presence detection
RIDI Green Box
Single office
Room type
2080
Operating hours/p.a.
Medium
Daylight influence
0,18
Price kWh (Euro)
TLD / KVG
Lamps / operation
4
luminaires window side
luminaires corridor side
Output per luminaire
85,2 (4x18w)
Output per luminaire
Lighting control system
Energy consumption 709 kWh p.a. Energy consumption
Energy costs
128 € p.a.*
Energy costs
20% 60% 70% 75%
Existing installation from the 80s, tri-band
26 mm dia. fluorescent lamp with EVG, white louvre
Existing system
Room type
Operating hours/p.a.
Daylight influence
Price kWh (Euro)
Lamps / operation
No. of luminaires
Existing installation from the 70s, standard 38 mm dia.
fluorescent lamp with KVG, opal diffuser luminaire
Exchanging an existing lighting system for the RIDI Green Box
components can bring real energy savings!
Energy consumption 100%
Mode 2: Open-plan office
If the level of daylight is too low AND there is someone present in the
room, the lighting system switches on. When there is no longer anyone
present, the lighting system dims automatically with a delay of
15 minutes and switches off after 120 minutes.
50%
Mode 1: Single office
If the level of daylight is too low AND there is someone present in the
room, the lighting system switches on. When there is no longer anyone
present, the lighting system switches off automatically with a delay of
15 minutes.
Lamps in colour 840 are already prefitted in the luminaires.
Lamps have already been burnt in for 100 h, allowing the system to
be commissioned and dimmed immediately on completed installation.
Parabolic mirror louvre SG – specular
What the RIDI Green Box has to offer:
Energy saving potential of up to 75%
Simple lay-mounting
Connection with colour-coded
linect plug-in system
Integrated presence and
daylight sensor
Ultra-efficient lighting technology
Prefitted lamps ready burnt in for
100 hours to allow immediate
dimming following installation
SG-MIRO
SILVER KS
Louvre/reflector material
Lamps,
louvre / reflector material
0%
Light control
Presence and daylight sensor
T16 , matt or specular louvre
Luminaire versions with T16 lamps for 625 and 600 modular ceilings
Voltage:
~230-240V,50-60HZ
Master luminaire design - EBRE 424 SG-MR / EBRME 424 SG-MR
Approvals:
Protection class:
Single steel luminaire, coated white with low rim.
Top reflector in MIRO SILVER. 4 x T16 24W lamps prefitted.
Equipped with a presence and daylight sensor with its own
control unit. Dimmable ballast, compatible with the DALI standard.
Dimming range 1-100%.
Parabolic mirror louvre SG in specular MIRO SILVER.
Slave luminaire design - EBRE 424 SG-SL / EBRME 424 SG-SL
EBRE/EBRME 424 SG
h [%]
80.7
Phi_u [%]
100
Phi_o [%]
0
LITG_DIN
A 60
UTE
0.81B
Single steel luminaire, coated white with low rim. Top reflector in
MIRO SILVER. 4 x T16 24W lamps prefitted. Dimmable ballast,
compatible with the DALI standard. Dimming range 1-100%.
Parabolic mirror louvre SG in specular MIRO SILVER.
IP 20
Slave
Group 2
Master
Group 1
Slave
Group 2
Slave
Group 1
Master luminaire design - EBRE 424 SM-MR / EBRME 424 SM-MR
Equipped with a presence and daylight sensor with its own
control unit. Dimmable ballast, compatible with the DALI Standard.
Parabolic mirror louvre SM in silk matt MIRO SILVER.
luminaire
box set
Slave luminaire design - EBRE 424 SM-SL / EBRME 424 SM-SL
EBRE/EBRME 424 SM
h [%]
80.3
Phi_u [%]
100
Phi_o [%]
0
LITG_DIN
A 60
UTE
0.80B
Single steel luminaire, coated white with low rim. Top reflector
in MIRO SILVER. 4 x T16 24W lamps prefitted. Dimmable ballast,
compatible with the DALI Standard. Dimming range 1-100%.
Parabolic mirror louvre SM in silk matt MIRO SILVER.
EBRE for 625 modular ceilings
Mounting
dimensions:
LE = 604 mm
LB = 604 mm
LE = 579 mm
LB = 579 mm
597
622
Mounting
dimensions:
linect
socket
597
8
60
T16 lamp (light colour 840) prefitted and burned in for 100 h!
Complete sets comprising master luminaire,
slave luminaires, connecting cables, plug
and socket components, prefitted lamps.
Underside of luminaires fitted with protective
film to be removed after installation.
597
622
60
Slave
Group 1
luminaire
linect
socket
622
+2
Slave
Group 2
box set
Slave luminaire
linect
socket
6
luminaire
60
Slave luminaire
Slave
Group 1
box set
Master luminaire
linect
socket
622
+2
Slave
Group 2
EBRME for 600 modular ceilings
Master luminaire
4
= 5-phase connecting cable, 4 metres, with linect socket, blue, I coding - | N | PE | L | DA | DA |
597
= 5-phase linect connector block, dark grey, L coding - | N | PE | L | L’ | N’ |
60
= 5-phase linect socket, dark grey, L coding - | N | PE | L | L’ | N’ |
= 5-phase linect connector block, blue, I coding - | N | PE | L | DA | DA |
T26 , Specular louvre
Voltage:
Luminaire versions with T26 lamps for 625 modular ceilings
~230-240V,50-60HZ
Protection class:
Approvals:
Master luminaire design - EBRE 418 GAG-MR
Equipped with a presence and daylight sensor with its own control unit.
Dimmable ballast, compatible with the DALI standard.
Parabolic mirror louvre GAG in specular MIRO SILVER.
EBRE 418 GAG
h [%]
88.1
Phi_u [%]
100
Phi_o [%]
0
LITG_DIN
A 60
UTE
0.88B
Slave luminaire design - EBRE 418 GAG-SL
Dimmable ballast, compatible with the DALI standard.
Dimming range 1-100%. Parabolic mirror louvre GAG in specular MIRO SILVER.
IP 20
Slave
Group 2
Master
Group 1
Slave
Group 2
Slave
Group 1
EBRE for ceiling module 625
Master luminaire
Slave luminaire
luminaire
box set
622
622
Mounting
dimensions:
linect
socket
linect
socket
622
LE = 614 mm
LB = 604 mm
+2
Slave
Group 2
Slave
Group 1
622
60
4
60
6
luminaire
box set
+2
Slave
Group 2
Slave
Group 1
8
luminaire
box set
T26 lamp (light colour 840) prefitted and burned in for 100 h!
Complete sets comprising master luminaire,
slave luminaires, connecting cables, plug
and socket components, prefitted lamps.
Underside of luminaires fitted with protective
film to be removed after installation.
= 5-phase connecting cable, 4 metres, with linect socket, blue, I coding - | N | PE | L | DA | DA |
= 5-phase linect connector block, dark grey, L coding - | N | PE | L | L’ | N’ |
= 5-phase linect socket, dark grey, L coding - | N | PE | L | L’ | N’ |
= 5-phase linect connector block, blue, I coding - | N | PE | L | DA | DA |
4
6
8
RIDI Green Box T26 for 625 modular ceilings::
Article no.
Designation
1837605
RIDI-GREEN-BOX EBRE 4X418 GAG
luminaire
box set
1837606
1837607
luminaire
box set
luminaire
box set
4
6
8
RIDI Green Box T16 for 625 modular ceilings:
Article no.
Designation
1837611
luminaire
box set
1837612
1837613
luminaire
box set
luminaire
box set
4
6
8
RIDI Green Box T16 für Modul 625:
Article no.
Designation
1837617
RIDI-GREEN-BOX EBRE 4X424 MAG
luminaire
box set
1837618
1837619
luminaire
box set
luminaire
box set
4
6
8
Article no.
Designation
1837614
RIDI-GREEN-BOX EBRME 4X424 GAG
luminaire
box set
1837615
1837616
luminaire
box set
luminaire
box set
4
6
8
Article no.
Designation
1837620
RIDI-GREEN-BOX EBRME 4X424 MAG
luminaire
box set
1837621
1837622
luminaire
box set
luminaire
box set
comprising
1x EBRE 418 GAG-MR
3x EBRE 418 GAG-SL
1x EBRE 418 GAG-MR
5x EBRE 418 GAG-SL
1x EBRE 418 GAG-MR
7x EBRE 418 GAG-SL
comprising
1x EBRE 424 SG-MR
3x EBRE 424 SG-SL
1x EBRE 424 SG-MR
5x EBRE 424 SG-SL
1x EBRE 424 SG-MR
7x EBRE 424 SG-SL
comprising
1x EBRE 424 SM-MR
3x EBRE 424 SM-SL
1x EBRE 424 SM-MR
5x EBRE 424 SM-SL
1x EBRE 424 SM-MR
7x EBRE 424 SM-SL
comprising
1x EBRME 424 SG-MR
3x EBRME 424 SG-SL
1x EBRME 424 SG-MR
5x EBRME 424 SG-SL
1x EBRME 424 SG-MR
7x EBRME 424 SG-SL
comprising
1x EBRME 424 SM-MR
3x EBRME 424 SM-SL
1x EBRME 424 SM-MR
5x EBRME 424 SM-SL
1x EBRME 424 SM-MR
7x EBRME 424 SM-SL
625 modular ceilings
T26 lamp
Specular louvre
T16 lamp
Specular louvre
T16 lamp
Matt louvre
T16 lamp
Specular louvre
T16 lamp
Matt louvre
Optional accesories
Article no.
0208191
DALI-AL-FB1
Simple tool for mode
selection (mode 1 and 2),
light value calibration
Article no.
0208190
DALI-AL-FB2
Selection tool (mode 1-10/
mode 1 and 2 + 8 other
modes), light value calibration
Article no.
0208221
DALI-AL-FB0
Two-button transmitter for
switching and dimming
functions
Article no.
0208266
DALI-AL-WH0
Wall holder for
DALI-AL-FB0
RIDI Leuchten GmbH • Hauptstraße 31-33 • D-72417 Jungingen
Tel. 0 74 77/8 72-0 • Fax 0 74 77/8 72-48 • Internet www.ridi.de • eMail info@ridi.de
© RIDI Leuchten GmbH / 0000 266 / 08/2010 / T / Despite all due care in the compilation of this flyer, freedom from printing and other errors cannot be guaranteed.
We reserve the right to make formal and technical changes.
Article no.
0208308
DALI-AL-PIR
Sensor upgrade for movement detection.
For ceiling mounting.

RIDI Green Box A4 8S_en_int_Layout 1 - ridi

Transcription

Similar documents

Recessed LED luminaires EBRE-LED, EBRME - ridi