Tanque Floculador
Transcription
Tanque Floculador
TANQUE FLOCULADOR TANQUE FLOCULADOR Consiste en un tanque rectangular de 22.30m de longitud, 14.95m de ancho y 5.00m de altura de muro. El tirante hidráulico es de 4.25mts aproximadamente. El Nivel de Agua Fréatico reportado en el estudio de mecánica de suelos proporcionado respecto al nivel del terreno natural se encuentra a 1.90mts de profundidad. El tanque floculador se encuentra desplantada sobre el nivel del terreno natural. Dicha instalación transmite al terreno un esfuerzo de por lo menos 6.00ton/m². Dicha estructura deberá desplantarse sobre un estrato mejorado, el cual se considera de características friccionantes, ya que el material a utilizar es del tipo arenas limosas, las cuales no deberán presentar plasticidad, se compactará en capas de 20cms de espesor terminado hasta alcanzar el 95% de la norma de laboratorio. El relleno será desde una profundidad de excavación de por lo menos 1.00m y deberá contar con un sobreancho de por lo menos 1.0m en su parte longitudinal. El material del mejoramiento será de gravas basálticas de 1” a finos. Para las zapatas que soportan tanto la caja de distribución del floculador, así como la canaleta de influente, se recomienda excavar hasta 2.30m y colocar una capa granular como rompedora de capilaridad, si en la zona se tiene material del tipo tezontle rojo, colocar en una sola capa y compactar al 95%. En dado caso que no se cuente con ese tipo de material, se deberá colocar una mezcla granular, del tipo gravas basálticas de 1” a finos y arenas limosas no plásticas en una proporción de 70-30. Se modeló la estructura por medio de un programa de análisis estructural de elemento finito en el cual se sometió la estructura a las diferentes combinaciones de carga según lo marcan las normas abajo enunciadas y se obtuvieron sus elementos mecánicos como momentos de flexión, cortantes, etc. Y se llevó a cabo la revisión de cada miembro y elemento de la estructura para su diseño conforme la normativa que se describe a continuación: • ACI 350-R89 “Estructuras sanitarias de concreto para el mejoramiento del ambiente” • ACI 350.1-01 “Code Requiriments for Enviromental Engeneering Concrete Sructures” • ACI 350.3-01 “Seismic Design of Liquid Containing Concrete Structures” • ACI 318-S08 “Requisitos de Reglamento para Concreto Estructural” • Manual de Obras Civiles C.F.E., 2008. Tomo de Diseño por Sísmo. • Manual de Diseño de Agua Potable, Alcantarillado y Saneamiento, MAPAS CNA 1997 Los factores de carga y resistencia, se tomaron como lo marcan las normas arriba descritas, así como las combinaciones de diseño. • Carga muerta F.C.= 1.4 • Carga viva F.C.= 1.7 • Carga hidrostática F.C. = 1.7 • Sismo F.C.= 1.1 (1.7) • Factor de durabilidad en flexión S= 1.3 (en acero) Apéndice C, ACI 350-06 • Factor de durabilidad en tensión directa S= 1.65 (en acero) Apéndice C, ACI 350-06 • Factor de durabilidad en tensión diag. S= 1.3 (en acero) Apéndice C, ACI 350-06 • Flexión F.R.= 0.9 • Cortante F.R.= 0.75 • Flexocompresión F.R.= 0.75 Se consideró el efecto del sismo sobre las estructuras de acuerdo con las siguientes características y conforme al Manual de Diseño de Obras Civiles de la Comisión Federal de Electricidad (CFE). • Clasificación de la Estructura: • Según su destino Grupo A. • Según su estructuración Tipo 1 • Zona sísmica A • Tipo de terreno III • Coeficiente sísmico c= 0.20 • Factor de ductilidad Q= 1.25 De acuerdo a la normativa arriba descrita, el concreto deberá contar con las siguientes características mínimas: • f’c= 250Kg/cm² (ACI 350 R89, MAPAS CNA) • Relación Agua-Cemento Máxima = 0.45 (ACI 350 R89) • Elaborado con Cemento Resistente a Sulfatos (RS) • Deberá contener fibra de polipropileno así como impermeabilizante integral al 1.5%. Cabe mencionar, que debido a las condicionantes de las concreteras para la elaboración de un concreto f’c=250Kg/cm² con una relación máxima de agua-cemento de 0.45 que se apoyan en la norma “NMX-C-403-ONNCCE-1999 Concreto Hidráulico de Uso Estructural”, únicamente ofrecen un concreto f´c=350Kg/cm² para dar la relación aguacemento y que es la característica más importante que debe de cumplir el concreto. Por tal motivo, se especifica la utilización de un concreto f’c=350Kg/cm² con una relación aguacemento de 0.45, resistente a sulfatos y que cuente con impermeabilizante integral y fibra de polipropileno. De igual forma, se mencionan a continuación una síntesis con los puntos más importantes del reglamento ACI 350 R89, “Estructuras sanitarias de concreto para el mejoramiento del ambiente”. • Para el diseño de los tanques, las acciones principales a las que se someten son las del empuje hidrostático del agua, el empuje del terreno, así como los empujes del agua subterránea. Se establece que “Los muros que soportan tanto las cargas interiores de agua como las cargas exteriores de tierra deben ser diseñados para soportar tanto el efecto total de la presión interior del agua como el efecto total de la presión exterior máxima de tierra, sin considerar que una carga podría minimizar el efecto de la otra.” • Para diseñar de acuerdo con el método de esfuerzos de trabajo de la sección 2.6.7 ACI 350, las varillas corrugadas o el alambre deben tener una separación tal que la cantidad de Z no exceda de 20,537 kg/cm, y las separaciones no deben ser de más de 30cms centro a centro. • Se contempla un requisito básico para el diseño dado por las recomendaciones del ACI-350-R89, el cual consiste en fijar un espesor mínimo de 0.30 metros para los muros con altura mayor a 3.00 m. En las siguientes páginas de la presente memoria de cálculo, se podrá observar la siguiente información: Isométrico del modelo de análisis en el programa STAAD PRO versión 2003 Análisis Hidrodinámico según las especificaciones CFE 2008 Datos de entrada del modelo STAAD PRO. Datos de salida del modelo STAAD PRO. Tablas de Desplazamientos, reacciones y esfuerzos de mayor magnitud de la estructura. Con estos datos finaliza la entrega electrónica, y se entregan copias de las envolventes de diseño. Dichas envolventes de diseño son obtenidas por medio de un programa de desarrollo propio que considera los valores mayores y menores de cada miembro y los grafica apoyándose de AutoCad y en ellas se puede observar el número de miembro del modelo y sus esfuerzos principales considerando todas las combinaciones de diseño empleadas en el modelo, los cuales fueron utilizados para el diseño. Dichos valores pueden verificarse manualmente en el modelo del STAAD proporcionado dentro de la presente entrega. También se proporciona un área de acero la cual se manipula manualmente para el diseño de estas estructuras, debido a que le programa que las genera toma como peralte efectivo de diseño “d” el 90% de la altura “h” del miembro que se analiza. También se podrán observar algunas “secciones” del modelo donde se indican los bastones adicionales al armado principal que se observa en dichas envolventes de diseño. Job No Sheet No Rev 1 Software licensed to Job Title Part Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 11:54 Load 9 Print Time/Date: 28/06/2010 13:09 STAAD.Pro for Windows Release 2003 Print Run 1 of 1 BUFETE DE INGENIERÍA Y DISEÑO S.A. DE C.V. GRAL. SAN MARTIN 139. COL. AMERICANA GDL., JAL. TEL.: 36 15 95 26, 36 30 48 92 C.P.: 44140 Fecha 10/08/2010 Proyecto: Floculador Subtítulo: Calculó: Hidrodinámico J.A.G.R. Nota: 2B y 2L son las dimensiones internas totales del tanque Tirante de Agua H = 4.25 m 2B = 7.30 m W = 719,532 Kg 2L = 22.30 m Espesor Muro = H/L = M= M0 = M1 = H0 = H02 = H1 = H12 = .30 m 0.381 73,346.77 kg seg²/m Zona Sísmica C c =0.3 a0 =0.1 Ta =0.6 seg Terreno Tipo III Tb =2.9 seg q = 1.5 r = 1/1 f'c =350 Kg/cm² 16,441.07 kg seg²/m 54,306.25 kg seg²/m 1.62 m 4.25 m Si se quiere tomar en cuenta el momento Hidrodinámico sobre el fondo del tanque. 2.35 m 4.25 m Si se quiere tomar en cuenta el momento δ= K0 = K1 = .007 m 21,580,053.91 40,452.75 Kg/m CALCULANDO Vs y Ms Para efectos en Losa de Base T0 = a0 = .173 seg 0.158 V0 = Μ0 = 16,968.37 Kg 27,403.92 Kg m T1 = a1 = 7.280 seg 0.120 V1 = Μ1 = Μ0 = 72,115.59 Kg m 42,443.98 Kg 99,884.75 Kg m Μ1 = 180,386.90 Kg m Vs = Μs = 45,710.14 Kg 103,575.76 Kg m Μs = 194,268.09 Kg m Vσ = Mσ = 3,130.83 Kg 7,094.23 Kg m Mσ = 13,306.03 Kg m COMBINACIONES DE DISEÑO SIN EFECTO EN LOSA Mu1 = 29,406.35 Kg m Mu2 = 26,914.86 Kg m No afecta sismo CON EFECTO EN LOSA 35,626.92 Kg m Afecta Sismo PRESIONES HIDRODINÁMICAS Ph = Po = 883.23 Kg/m 590.10 Kg/m Ph = Po = 883.23 Kg/m -1,473.33 Kg/m BUFETE DE INGENIERÍA Y DISEÑO S.A. DE C.V. GRAL. SAN MARTIN 139. COL. AMERICANA GDL., JAL. TEL.: 36 15 95 26, 36 30 48 92 C.P.: 44140 Fecha 10/08/2010 Proyecto: Floculador Subtítulo: Calculó: Hidrodinámico J.A.G.R. Nota: 2B y 2L son las dimensiones internas totales del tanque Tirante de Agua H = 4.25 m 2B = 22.30 m W = 719,532 Kg 2L = 7.30 m Espesor Muro = H/L = M= M0 = M1 = H0 = H02 = H1 = H12 = .30 m 1.164 73,346.77 kg seg²/m Zona Sísmica A c =0.3 a0 =0.1 Ta =0.6 seg Terreno Tipo III Tb =2.9 seg q = 1.5 r = 1/1 f'c =350 Kg/cm² 45,095.83 kg seg²/m 31,139.82 kg seg²/m 1.62 m 2.96 m Si se quiere tomar en cuenta el momento Hidrodinámico sobre el fondo del tanque. 2.69 m 3.57 m Si se quiere tomar en cuenta el momento δ= K0 = K1 = .007 m 65,922,630.44 124,120.84 Kg/m CALCULANDO Vs y Ms Para efectos en Losa de Base T0 = a0 = .164 seg 0.155 V0 = Μ0 = 45,648.30 Kg 73,722.00 Kg m T1 = a1 = 3.147 seg 0.276 V1 = Μ1 = Μ0 = 135,147.00 Kg m 56,298.59 Kg 151,520.88 Kg m Μ1 = 200,947.16 Kg m Vs = Μs = 72,479.64 Kg 168,503.74 Kg m Μs = 242,166.21 Kg m Vσ = Mσ = 1,625.10 Kg 3,778.11 Kg m Mσ = 5,429.74 Kg m COMBINACIONES DE DISEÑO SIN EFECTO EN LOSA Mu1 = 29,406.35 Kg m Mu2 = 22,264.00 Kg m No afecta sismo CON EFECTO EN LOSA 24,580.41 Kg m No afecta el sismo PRESIONES HIDRODINÁMICAS Ph = Po = 490.26 Kg/m 274.50 Kg/m Ph = Po = 490.26 Kg/m -274.14 Kg/m BUFETE DE INGENIERÍA Y DISEÑO S.A. DE C.V. GRAL. SAN MARTIN 139. COL. AMERICANA GDL., JAL. TEL.: 36 15 95 26, 36 30 48 92 C.P.: 44140 Fecha 10/08/2010 Proyecto: Floculador Subtítulo: Calculó: Hidrodinámico J.A.G.R. Nota: 2B y 2L son las dimensiones internas totales del tanque Tirante de Agua H = 4.25 m 2B = 14.60 m W = 1,439,064 Kg 2L = 22.30 m Espesor Muro = H/L = M= M0 = M1 = H0 = H02 = H1 = H12 = .30 m 0.381 146,693.54 kg seg²/m Zona Sísmica C c =0.3 a0 =0.1 Ta =0.6 seg Terreno Tipo III Tb =2.9 seg q = 1.5 r = 1/1 f'c =350 Kg/cm² 32,882.13 kg seg²/m 108,612.49 kg seg²/m 1.62 m 4.25 m Si se quiere tomar en cuenta el momento Hidrodinámico sobre el fondo del tanque. 2.35 m 4.25 m Si se quiere tomar en cuenta el momento δ= K0 = K1 = .007 m 43,160,107.82 80,905.50 Kg/m CALCULANDO Vs y Ms Para efectos en Losa de Base T0 = a0 = .173 seg 0.158 V0 = Μ0 = 33,936.75 Kg 54,807.85 Kg m T1 = a1 = 7.280 seg 0.120 V1 = Μ1 = Μ0 = 144,231.18 Kg m 84,887.95 Kg 199,769.50 Kg m Μ1 = 360,773.79 Kg m Vs = Μs = 91,420.28 Kg 207,151.52 Kg m Μs = 388,536.18 Kg m Vσ = Mσ = 3,130.83 Kg 7,094.23 Kg m Mσ = 13,306.03 Kg m COMBINACIONES DE DISEÑO SIN EFECTO EN LOSA Mu1 = 29,406.35 Kg m Mu2 = 26,914.86 Kg m No afecta sismo CON EFECTO EN LOSA 35,626.92 Kg m Afecta Sismo PRESIONES HIDRODINÁMICAS Ph = Po = 883.23 Kg/m 590.10 Kg/m Ph = Po = 883.23 Kg/m -1,473.33 Kg/m BUFETE DE INGENIERÍA Y DISEÑO S.A. DE C.V. GRAL. SAN MARTIN 139. COL. AMERICANA GDL., JAL. TEL.: 36 15 95 26, 36 30 48 92 C.P.: 44140 Fecha 10/08/2010 Proyecto: Floculador Subtítulo: Calculó: Hidrodinámico J.A.G.R. Nota: 2B y 2L son las dimensiones internas totales del tanque Tirante de Agua H = 4.25 m 2B = 22.30 m W = 1,439,064 Kg 2L = 14.60 m Espesor Muro = H/L = M= M0 = M1 = H0 = H02 = H1 = H12 = .30 m 0.582 146,693.54 kg seg²/m Zona Sísmica A c =0.3 a0 =0.1 Ta =0.6 seg Terreno Tipo III Tb =2.9 seg q = 1.5 r = 1/1 f'c =350 Kg/cm² 49,946.09 kg seg²/m 95,586.38 kg seg²/m 1.62 m 4.25 m Si se quiere tomar en cuenta el momento Hidrodinámico sobre el fondo del tanque. 2.37 m 4.25 m Si se quiere tomar en cuenta el momento δ= K0 = K1 = .007 m 65,922,630.44 146,188.94 Kg/m CALCULANDO Vs y Ms Para efectos en Losa de Base T0 = a0 = .173 seg 0.158 V0 = Μ0 = 51,495.66 Kg 83,165.49 Kg m T1 = a1 = 5.081 seg 0.171 V1 = Μ1 = Μ0 = 218,856.55 Kg m 107,046.48 Kg 253,915.01 Kg m Μ1 = 454,947.56 Kg m Vs = Μs = 118,788.69 Kg 267,187.82 Kg m Μs = 504,851.93 Kg m Vσ = Mσ = 2,663.42 Kg 5,990.76 Kg m Mσ = 11,319.55 Kg m COMBINACIONES DE DISEÑO SIN EFECTO EN LOSA Mu1 = 29,406.35 Kg m Mu2 = 25,367.24 Kg m No afecta sismo CON EFECTO EN LOSA 32,840.87 Kg m Afecta Sismo PRESIONES HIDRODINÁMICAS Ph = Po = 736.63 Kg/m 516.74 Kg/m Ph = Po = 736.63 Kg/m -1,253.38 Kg/m C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 STAAD SPACE START JOB INFORMATION ENGINEER DATE 23-Jun-10 END JOB INFORMATION INPUT WIDTH 79 UNIT CM KG JOINT COORDINATES 1 0 0 0; 2 100 0 0; 3 200 0 0; 4 300 0 0; 5 400 0 0; 6 500 0 0; 7 600 0 0; 8 700 0 0; 9 800 0 0; 10 900 0 0; 11 1000 0 0; 12 1100 0 0; 13 1200 0 0; 14 1300 0 0; 15 1400 0 0; 16 1500 0 0; 17 1600 0 0; 18 1700 0 0; 19 1800 0 0; 20 1900 0 0; 21 2000 0 0; 22 2100 0 0; 23 2200 0 0; 24 2300 0 0; 25 2400 0 0; 26 0 0 100; 27 100 0 100; 28 200 0 100; 29 300 0 100; 30 400 0 100; 31 500 0 100; 32 600 0 100; 33 700 0 100; 34 800 0 100; 35 900 0 100; 36 1000 0 100; 37 1100 0 100; 38 1200 0 100; 39 1300 0 100; 40 1400 0 100; 41 1500 0 100; 42 1600 0 100; 43 1700 0 100; 44 1800 0 100; 45 1900 0 100; 46 2000 0 100; 47 2100 0 100; 48 2200 0 100; 49 2300 0 100; 50 2400 0 100; 51 0 0 200; 52 100 0 200; 53 200 0 200; 54 300 0 200; 55 400 0 200; 56 500 0 200; 57 600 0 200; 58 700 0 200; 59 800 0 200; 60 900 0 200; 61 1000 0 200; 62 1100 0 200; 63 1200 0 200; 64 1300 0 200; 65 1400 0 200; 66 1500 0 200; 67 1600 0 200; 68 1700 0 200; 69 1800 0 200; 70 1900 0 200; 71 2000 0 200; 72 2100 0 200; 73 2200 0 200; 74 2300 0 200; 75 2400 0 200; 76 0 0 300; 77 100 0 300; 78 200 0 300; 79 300 0 300; 80 400 0 300; 81 500 0 300; 82 600 0 300; 83 700 0 300; 84 800 0 300; 85 900 0 300; 86 1000 0 300; 87 1100 0 300; 88 1200 0 300; 89 1300 0 300; 90 1400 0 300; 91 1500 0 300; 92 1600 0 300; 93 1700 0 300; 94 1800 0 300; 95 1900 0 300; 96 2000 0 300; 97 2100 0 300; 98 2200 0 300; 99 2300 0 300; 100 2400 0 300; 101 0 0 400; 102 100 0 400; 103 200 0 400; 104 300 0 400; 105 400 0 400; 106 500 0 400; 107 600 0 400; 108 700 0 400; 109 800 0 400; 110 900 0 400; 111 1000 0 400; 112 1100 0 400; 113 1200 0 400; 114 1300 0 400; 115 1400 0 400; 116 1500 0 400; 117 1600 0 400; 118 1700 0 400; 119 1800 0 400; 120 1900 0 400; 121 2000 0 400; 122 2100 0 400; 123 2200 0 400; 124 2300 0 400; 125 2400 0 400; 126 0 0 500; 127 100 0 500; 128 200 0 500; 129 300 0 500; 130 400 0 500; 131 500 0 500; 132 600 0 500; 133 700 0 500; 134 800 0 500; 135 900 0 500; 136 1000 0 500; 137 1100 0 500; 138 1200 0 500; 139 1300 0 500; 140 1400 0 500; 141 1500 0 500; 142 1600 0 500; 143 1700 0 500; 144 1800 0 500; 145 1900 0 500; 146 2000 0 500; 147 2100 0 500; 148 2200 0 500; 149 2300 0 500; 150 2400 0 500; 151 0 0 600; 152 100 0 600; 153 200 0 600; 154 300 0 600; 155 400 0 600; 156 500 0 600; 157 600 0 600; 158 700 0 600; 159 800 0 600; 160 900 0 600; 161 1000 0 600; 162 1100 0 600; 163 1200 0 600; 164 1300 0 600; 165 1400 0 600; 166 1500 0 600; 167 1600 0 600; 168 1700 0 600; 169 1800 0 600; 170 1900 0 600; 171 2000 0 600; 172 2100 0 600; 173 2200 0 600; 174 2300 0 600; 175 2400 0 600; 176 0 0 700; 177 100 0 700; 178 200 0 700; 179 300 0 700; 180 400 0 700; 181 500 0 700; 182 600 0 700; 183 700 0 700; 184 800 0 700; 185 900 0 700; 186 1000 0 700; 187 1100 0 700; 188 1200 0 700; 189 1300 0 700; 190 1400 0 700; 191 1500 0 700; 192 1600 0 700; 193 1700 0 700; 194 1800 0 700; 195 1900 0 700; 196 2000 0 700; 197 2100 0 700; 198 2200 0 700; 199 2300 0 700; 200 2400 0 700; 201 0 0 800; 202 100 0 800; 203 200 0 800; 204 300 0 800; 205 400 0 800; 206 500 0 800; 207 600 0 800; 208 700 0 800; 209 800 0 800; 210 900 0 800; 211 1000 0 800; 212 1100 0 800; 213 1200 0 800; 214 1300 0 800; 215 1400 0 800; 216 1500 0 800; 217 1600 0 800; 218 1700 0 800; 219 1800 0 800; 220 1900 0 800; 221 2000 0 800; 222 2100 0 800; 223 2200 0 800; 224 2300 0 800; 225 2400 0 800; 226 0 0 900; 227 100 0 900; 228 200 0 900; 229 300 0 900; 230 400 0 900; 231 500 0 900; 232 600 0 900; 233 700 0 900; 234 800 0 900; 235 900 0 900; 236 1000 0 900; 237 1100 0 900; 238 1200 0 900; 239 1300 0 900; 240 1400 0 900; 241 1500 0 900; 242 1600 0 900; 243 1700 0 900; 244 1800 0 900; 245 1900 0 900; 246 2000 0 900; 247 2100 0 900; 248 2200 0 900; 249 2300 0 900; 250 2400 0 900; 251 0 0 1000; 252 100 0 1000; 253 200 0 1000; 254 300 0 1000; 255 400 0 1000; 256 500 0 1000; 257 600 0 1000; 258 700 0 1000; 259 800 0 1000; 260 900 0 1000; 261 1000 0 1000; 262 1100 0 1000; 263 1200 0 1000; 264 1300 0 1000; 265 1400 0 1000; 266 1500 0 1000; 267 1600 0 1000; 268 1700 0 1000; 269 1800 0 1000; 270 1900 0 1000; 271 2000 0 1000; 272 2100 0 1000; 273 2200 0 1000; 274 2300 0 1000; 275 2400 0 1000; 276 0 0 1100; 277 100 0 1100; 278 200 0 1100; 279 300 0 1100; 280 400 0 1100; 281 500 0 1100; 282 600 0 1100; 283 700 0 1100; 284 800 0 1100; 285 900 0 1100; 286 1000 0 1100; 287 1100 0 1100; 288 1200 0 1100; 289 1300 0 1100; 290 1400 0 1100; 291 1500 0 1100; 292 1600 0 1100; 293 1700 0 1100; 294 1800 0 1100; 295 1900 0 1100; 296 2000 0 1100; 297 2100 0 1100; 298 2200 0 1100; 299 2300 0 1100; 300 2400 0 1100; 301 0 0 1200; 302 100 0 1200; 303 200 0 1200; 304 300 0 1200; 305 400 0 1200; 306 500 0 1200; 307 600 0 1200; 308 700 0 1200; 309 800 0 1200; 310 900 0 1200; 311 1000 0 1200; 312 1100 0 1200; 313 1200 0 1200; 314 1300 0 1200; 315 1400 0 1200; 316 1500 0 1200; 317 1600 0 1200; 318 1700 0 1200; 319 1800 0 1200; 320 1900 0 1200; 321 2000 0 1200; 322 2100 0 1200; 323 2200 0 1200; 324 2300 0 1200; 325 2400 0 1200; 326 0 0 1300; 327 100 0 1300; 328 200 0 1300; 329 300 0 1300; 330 400 0 1300; 331 500 0 1300; 332 600 0 1300; 333 700 0 1300; 334 800 0 1300; 335 900 0 1300; 336 1000 0 1300; 337 1100 0 1300; 338 1200 0 1300; 339 1300 0 1300; 340 1400 0 1300; 341 1500 0 1300; 342 1600 0 1300; 343 1700 0 1300; 344 1800 0 1300; 345 1900 0 1300; 346 2000 0 1300; 347 2100 0 1300; 348 2200 0 1300; 349 2300 0 1300; 350 2400 0 1300; 351 0 0 1400; 352 100 0 1400; 353 200 0 1400; 354 300 0 1400; 355 400 0 1400; 356 500 0 1400; 357 600 0 1400; 358 700 0 1400; 359 800 0 1400; 360 900 0 1400; 361 1000 0 1400; 362 1100 0 1400; 363 1200 0 1400; 364 1300 0 1400; 365 1400 0 1400; 366 1500 0 1400; 367 1600 0 1400; 368 1700 0 1400; Page: 1 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 369 373 377 382 386 390 394 398 402 407 411 415 419 423 428 433 438 443 448 453 457 461 465 469 473 477 481 485 489 493 497 501 505 509 513 517 521 525 529 533 537 541 545 549 553 557 562 567 572 577 582 586 590 594 598 602 606 610 614 618 622 626 630 634 638 642 646 650 654 658 662 666 670 674 678 682 686 690 695 700 705 710 715 719 1800 0 1400; 370 1900 0 1400; 371 2000 0 1400; 372 2100 0 1400; 2200 0 1400; 374 2300 0 1400; 375 2400 0 1400; 376 0 0 1500; 100 0 1500; 378 200 0 1500; 379 300 0 1500; 380 400 0 1500; 381 500 0 1500; 600 0 1500; 383 700 0 1500; 384 800 0 1500; 385 900 0 1500; 1000 0 1500; 387 1100 0 1500; 388 1200 0 1500; 389 1300 0 1500; 1400 0 1500; 391 1500 0 1500; 392 1600 0 1500; 393 1700 0 1500; 1800 0 1500; 395 1900 0 1500; 396 2000 0 1500; 397 2100 0 1500; 2200 0 1500; 399 2300 0 1500; 400 2400 0 1500; 401 0 0 1600; 100 0 1600; 403 200 0 1600; 404 300 0 1600; 405 400 0 1600; 406 500 0 1600; 600 0 1600; 408 700 0 1600; 409 800 0 1600; 410 900 0 1600; 1000 0 1600; 412 1100 0 1600; 413 1200 0 1600; 414 1300 0 1600; 1400 0 1600; 416 1500 0 1600; 417 1600 0 1600; 418 1700 0 1600; 1800 0 1600; 420 1900 0 1600; 421 2000 0 1600; 422 2100 0 1600; 2200 0 1600; 424 2300 0 1600; 425 2400 0 1600; 426 0 100 0; 427 100 100 0; 200 100 0; 429 300 100 0; 430 400 100 0; 431 500 100 0; 432 600 100 0; 700 100 0; 434 800 100 0; 435 900 100 0; 436 1000 100 0; 437 1100 100 0; 1200 100 0; 439 1300 100 0; 440 1400 100 0; 441 1500 100 0; 442 1600 100 0; 1700 100 0; 444 1800 100 0; 445 1900 100 0; 446 2000 100 0; 447 2100 100 0; 2200 100 0; 449 2300 100 0; 450 2400 100 0; 451 0 100 100; 452 800 100 100; 1600 100 100; 454 2400 100 100; 455 0 100 200; 456 800 100 200; 1600 100 200; 458 2400 100 200; 459 0 100 300; 460 800 100 300; 1600 100 300; 462 2400 100 300; 463 0 100 400; 464 800 100 400; 1600 100 400; 466 2400 100 400; 467 0 100 500; 468 800 100 500; 1600 100 500; 470 2400 100 500; 471 0 100 600; 472 800 100 600; 1600 100 600; 474 2400 100 600; 475 0 100 700; 476 800 100 700; 1600 100 700; 478 2400 100 700; 479 0 100 800; 480 100 100 800; 200 100 800; 482 300 100 800; 483 400 100 800; 484 500 100 800; 600 100 800; 486 700 100 800; 487 800 100 800; 488 900 100 800; 1000 100 800; 490 1100 100 800; 491 1200 100 800; 492 1300 100 800; 1400 100 800; 494 1500 100 800; 495 1600 100 800; 496 1700 100 800; 1800 100 800; 498 1900 100 800; 499 2000 100 800; 500 2100 100 800; 2200 100 800; 502 2300 100 800; 503 2400 100 800; 504 0 100 900; 800 100 900; 506 1600 100 900; 507 2400 100 900; 508 0 100 1000; 800 100 1000; 510 1600 100 1000; 511 2400 100 1000; 512 0 100 1100; 800 100 1100; 514 1600 100 1100; 515 2400 100 1100; 516 0 100 1200; 800 100 1200; 518 1600 100 1200; 519 2400 100 1200; 520 0 100 1300; 800 100 1300; 522 1600 100 1300; 523 2400 100 1300; 524 0 100 1400; 800 100 1400; 526 1600 100 1400; 527 2400 100 1400; 528 0 100 1500; 800 100 1500; 530 1600 100 1500; 531 2400 100 1500; 532 0 100 1600; 100 100 1600; 534 200 100 1600; 535 300 100 1600; 536 400 100 1600; 500 100 1600; 538 600 100 1600; 539 700 100 1600; 540 800 100 1600; 900 100 1600; 542 1000 100 1600; 543 1100 100 1600; 544 1200 100 1600; 1300 100 1600; 546 1400 100 1600; 547 1500 100 1600; 548 1600 100 1600; 1700 100 1600; 550 1800 100 1600; 551 1900 100 1600; 552 2000 100 1600; 2100 100 1600; 554 2200 100 1600; 555 2300 100 1600; 556 2400 100 1600; 0 200 0; 558 100 200 0; 559 200 200 0; 560 300 200 0; 561 400 200 0; 500 200 0; 563 600 200 0; 564 700 200 0; 565 800 200 0; 566 900 200 0; 1000 200 0; 568 1100 200 0; 569 1200 200 0; 570 1300 200 0; 571 1400 200 0; 1500 200 0; 573 1600 200 0; 574 1700 200 0; 575 1800 200 0; 576 1900 200 0; 2000 200 0; 578 2100 200 0; 579 2200 200 0; 580 2300 200 0; 581 2400 200 0; 0 200 100; 583 800 200 100; 584 1600 200 100; 585 2400 200 100; 0 200 200; 587 800 200 200; 588 1600 200 200; 589 2400 200 200; 0 200 300; 591 800 200 300; 592 1600 200 300; 593 2400 200 300; 0 200 400; 595 800 200 400; 596 1600 200 400; 597 2400 200 400; 0 200 500; 599 800 200 500; 600 1600 200 500; 601 2400 200 500; 0 200 600; 603 800 200 600; 604 1600 200 600; 605 2400 200 600; 0 200 700; 607 800 200 700; 608 1600 200 700; 609 2400 200 700; 0 200 800; 611 100 200 800; 612 200 200 800; 613 300 200 800; 400 200 800; 615 500 200 800; 616 600 200 800; 617 700 200 800; 800 200 800; 619 900 200 800; 620 1000 200 800; 621 1100 200 800; 1200 200 800; 623 1300 200 800; 624 1400 200 800; 625 1500 200 800; 1600 200 800; 627 1700 200 800; 628 1800 200 800; 629 1900 200 800; 2000 200 800; 631 2100 200 800; 632 2200 200 800; 633 2300 200 800; 2400 200 800; 635 0 200 900; 636 800 200 900; 637 1600 200 900; 2400 200 900; 639 0 200 1000; 640 800 200 1000; 641 1600 200 1000; 2400 200 1000; 643 0 200 1100; 644 800 200 1100; 645 1600 200 1100; 2400 200 1100; 647 0 200 1200; 648 800 200 1200; 649 1600 200 1200; 2400 200 1200; 651 0 200 1300; 652 800 200 1300; 653 1600 200 1300; 2400 200 1300; 655 0 200 1400; 656 800 200 1400; 657 1600 200 1400; 2400 200 1400; 659 0 200 1500; 660 800 200 1500; 661 1600 200 1500; 2400 200 1500; 663 0 200 1600; 664 100 200 1600; 665 200 200 1600; 300 200 1600; 667 400 200 1600; 668 500 200 1600; 669 600 200 1600; 700 200 1600; 671 800 200 1600; 672 900 200 1600; 673 1000 200 1600; 1100 200 1600; 675 1200 200 1600; 676 1300 200 1600; 677 1400 200 1600; 1500 200 1600; 679 1600 200 1600; 680 1700 200 1600; 681 1800 200 1600; 1900 200 1600; 683 2000 200 1600; 684 2100 200 1600; 685 2200 200 1600; 2300 200 1600; 687 2400 200 1600; 688 0 300 0; 689 100 300 0; 200 300 0; 691 300 300 0; 692 400 300 0; 693 500 300 0; 694 600 300 0; 700 300 0; 696 800 300 0; 697 900 300 0; 698 1000 300 0; 699 1100 300 0; 1200 300 0; 701 1300 300 0; 702 1400 300 0; 703 1500 300 0; 704 1600 300 0; 1700 300 0; 706 1800 300 0; 707 1900 300 0; 708 2000 300 0; 709 2100 300 0; 2200 300 0; 711 2300 300 0; 712 2400 300 0; 713 0 300 100; 714 800 300 100; 1600 300 100; 716 2400 300 100; 717 0 300 200; 718 800 300 200; 1600 300 200; 720 2400 300 200; 721 0 300 300; 722 800 300 300; Page: 2 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 723 1600 300 300; 724 2400 300 300; 725 0 300 400; 726 800 300 400; 727 1600 300 400; 728 2400 300 400; 729 0 300 500; 730 800 300 500; 731 1600 300 500; 732 2400 300 500; 733 0 300 600; 734 800 300 600; 735 1600 300 600; 736 2400 300 600; 737 0 300 700; 738 800 300 700; 739 1600 300 700; 740 2400 300 700; 741 0 300 800; 742 100 300 800; 743 200 300 800; 744 300 300 800; 745 400 300 800; 746 500 300 800; 747 600 300 800; 748 700 300 800; 749 800 300 800; 750 900 300 800; 751 1000 300 800; 752 1100 300 800; 753 1200 300 800; 754 1300 300 800; 755 1400 300 800; 756 1500 300 800; 757 1600 300 800; 758 1700 300 800; 759 1800 300 800; 760 1900 300 800; 761 2000 300 800; 762 2100 300 800; 763 2200 300 800; 764 2300 300 800; 765 2400 300 800; 766 0 300 900; 767 800 300 900; 768 1600 300 900; 769 2400 300 900; 770 0 300 1000; 771 800 300 1000; 772 1600 300 1000; 773 2400 300 1000; 774 0 300 1100; 775 800 300 1100; 776 1600 300 1100; 777 2400 300 1100; 778 0 300 1200; 779 800 300 1200; 780 1600 300 1200; 781 2400 300 1200; 782 0 300 1300; 783 800 300 1300; 784 1600 300 1300; 785 2400 300 1300; 786 0 300 1400; 787 800 300 1400; 788 1600 300 1400; 789 2400 300 1400; 790 0 300 1500; 791 800 300 1500; 792 1600 300 1500; 793 2400 300 1500; 794 0 300 1600; 795 100 300 1600; 796 200 300 1600; 797 300 300 1600; 798 400 300 1600; 799 500 300 1600; 800 600 300 1600; 801 700 300 1600; 802 800 300 1600; 803 900 300 1600; 804 1000 300 1600; 805 1100 300 1600; 806 1200 300 1600; 807 1300 300 1600; 808 1400 300 1600; 809 1500 300 1600; 810 1600 300 1600; 811 1700 300 1600; 812 1800 300 1600; 813 1900 300 1600; 814 2000 300 1600; 815 2100 300 1600; 816 2200 300 1600; 817 2300 300 1600; 818 2400 300 1600; 819 0 400 0; 820 100 400 0; 821 200 400 0; 822 300 400 0; 823 400 400 0; 824 500 400 0; 825 600 400 0; 826 700 400 0; 827 800 400 0; 828 900 400 0; 829 1000 400 0; 830 1100 400 0; 831 1200 400 0; 832 1300 400 0; 833 1400 400 0; 834 1500 400 0; 835 1600 400 0; 836 1700 400 0; 837 1800 400 0; 838 1900 400 0; 839 2000 400 0; 840 2100 400 0; 841 2200 400 0; 842 2300 400 0; 843 2400 400 0; 844 0 400 100; 845 800 400 100; 846 1600 400 100; 847 2400 400 100; 848 0 400 200; 849 800 400 200; 850 1600 400 200; 851 2400 400 200; 852 0 400 300; 853 800 400 300; 854 1600 400 300; 855 2400 400 300; 856 0 400 400; 857 800 400 400; 858 1600 400 400; 859 2400 400 400; 860 0 400 500; 861 800 400 500; 862 1600 400 500; 863 2400 400 500; 864 800 400 600; 865 1600 400 600; 866 2400 400 600; 867 800 400 700; 868 1600 400 700; 869 0 400 800; 870 100 400 800; 871 200 400 800; 872 300 400 800; 873 400 400 800; 874 500 400 800; 875 600 400 800; 876 700 400 800; 877 800 400 800; 878 900 400 800; 879 1000 400 800; 880 1100 400 800; 881 1200 400 800; 882 1300 400 800; 883 1400 400 800; 884 1500 400 800; 885 1600 400 800; 886 1700 400 800; 887 1800 400 800; 888 1900 400 800; 889 2000 400 800; 890 2100 400 800; 891 2200 400 800; 892 2300 400 800; 893 2400 400 800; 894 800 400 900; 895 1600 400 900; 896 800 400 1000; 897 1600 400 1000; 898 2400 400 1000; 899 0 400 1100; 900 800 400 1100; 901 1600 400 1100; 902 2400 400 1100; 903 0 400 1200; 904 800 400 1200; 905 1600 400 1200; 906 2400 400 1200; 907 0 400 1300; 908 800 400 1300; 909 1600 400 1300; 910 2400 400 1300; 911 0 400 1400; 912 800 400 1400; 913 1600 400 1400; 914 2400 400 1400; 915 0 400 1500; 916 800 400 1500; 917 1600 400 1500; 918 2400 400 1500; 919 0 400 1600; 920 100 400 1600; 921 200 400 1600; 922 300 400 1600; 923 400 400 1600; 924 500 400 1600; 925 600 400 1600; 926 700 400 1600; 927 800 400 1600; 928 900 400 1600; 929 1000 400 1600; 930 1100 400 1600; 931 1200 400 1600; 932 1300 400 1600; 933 1400 400 1600; 934 1500 400 1600; 935 1600 400 1600; 936 1700 400 1600; 937 1800 400 1600; 938 1900 400 1600; 939 2000 400 1600; 940 2100 400 1600; 941 2200 400 1600; 942 2300 400 1600; 943 2400 400 1600; 944 0 500 0; 945 100 500 0; 946 200 500 0; 947 300 500 0; 948 400 500 0; 949 500 500 0; 950 600 500 0; 951 700 500 0; 952 800 500 0; 953 900 500 0; 954 1000 500 0; 955 1100 500 0; 956 1200 500 0; 957 1300 500 0; 958 1400 500 0; 959 1500 500 0; 960 1600 500 0; 961 1700 500 0; 962 1800 500 0; 963 1900 500 0; 964 2000 500 0; 965 2100 500 0; 966 2200 500 0; 967 2300 500 0; 968 2400 500 0; 969 0 500 100; 970 800 500 100; 971 1600 500 100; 972 2400 500 100; 973 0 500 200; 974 800 500 200; 975 1600 500 200; 976 2400 500 200; 977 0 500 300; 978 800 500 300; 979 1600 500 300; 980 2400 500 300; 981 0 500 400; 982 800 500 400; 983 1600 500 400; 984 2400 500 400; 985 0 500 500; 986 800 500 500; 987 1600 500 500; 988 2400 500 500; 989 800 500 600; 990 1600 500 600; 991 2400 500 600; 992 800 500 700; 993 1600 500 700; 994 0 500 800; 995 100 500 800; 996 200 500 800; 997 300 500 800; 998 400 500 800; 999 500 500 800; 1000 600 500 800; 1001 700 500 800; 1002 800 500 800; 1003 900 500 800; 1004 1000 500 800; 1005 1100 500 800; 1006 1200 500 800; 1007 1300 500 800; 1008 1400 500 800; 1009 1500 500 800; 1010 1600 500 800; 1011 1700 500 800; 1012 1800 500 800; 1013 1900 500 800; 1014 2000 500 800; 1015 2100 500 800; 1016 2200 500 800; 1017 2300 500 800; 1018 2400 500 800; 1019 800 500 900; 1020 1600 500 900; 1021 800 500 1000; 1022 1600 500 1000; 1023 2400 500 1000; 1024 0 500 1100; 1025 800 500 1100; 1026 1600 500 1100; 1027 2400 500 1100; 1028 0 500 1200; 1029 800 500 1200; 1030 1600 500 1200; 1031 2400 500 1200; 1032 0 500 1300; 1033 800 500 1300; 1034 1600 500 1300; 1035 2400 500 1300; 1036 0 500 1400; 1037 800 500 1400; 1038 1600 500 1400; 1039 2400 500 1400; 1040 0 500 1500; 1041 800 500 1500; 1042 1600 500 1500; 1043 2400 500 1500; 1044 0 500 1600; 1045 100 500 1600; 1046 200 500 1600; 1047 300 500 1600; 1048 400 500 1600; 1049 500 500 1600; 1050 600 500 1600; 1051 700 500 1600; 1052 800 500 1600; 1053 900 500 1600; 1054 1000 500 1600; 1055 1100 500 1600; 1056 1200 500 1600; 1057 1300 500 1600; 1058 1400 500 1600; 1059 1500 500 1600; 1060 1600 500 1600; 1061 1700 500 1600; 1062 1800 500 1600; 1063 1900 500 1600; 1064 2000 500 1600; 1065 2100 500 1600; 1066 2200 500 1600; 1067 2300 500 1600; 1068 2400 500 1600; Page: 3 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 1069 0 600 0; 1070 100 600 0; 1071 200 600 0; 1072 300 600 0; 1073 400 600 0; 1074 500 600 0; 1075 600 600 0; 1076 700 600 0; 1077 800 600 0; 1078 900 600 0; 1079 1000 600 0; 1080 1100 600 0; 1081 1200 600 0; 1082 1300 600 0; 1083 1400 600 0; 1084 1500 600 0; 1085 1600 600 0; 1086 1700 600 0; 1087 1800 600 0; 1088 1900 600 0; 1089 2000 600 0; 1090 2100 600 0; 1091 2200 600 0; 1092 2300 600 0; 1093 2400 600 0; 1094 0 600 100; 1095 800 600 100; 1096 1600 600 100; 1097 2400 600 100; 1098 0 600 200; 1099 800 600 200; 1100 1600 600 200; 1101 2400 600 200; 1102 0 600 300; 1103 800 600 300; 1104 1600 600 300; 1105 2400 600 300; 1106 0 600 400; 1107 800 600 400; 1108 1600 600 400; 1109 2400 600 400; 1110 0 600 500; 1111 800 600 500; 1112 1600 600 500; 1113 2400 600 500; 1114 800 600 600; 1115 1600 600 600; 1116 2400 600 600; 1117 800 600 700; 1118 1600 600 700; 1119 0 600 800; 1120 100 600 800; 1121 200 600 800; 1122 300 600 800; 1123 400 600 800; 1124 500 600 800; 1125 600 600 800; 1126 700 600 800; 1127 800 600 800; 1128 900 600 800; 1129 1000 600 800; 1130 1100 600 800; 1131 1200 600 800; 1132 1300 600 800; 1133 1400 600 800; 1134 1500 600 800; 1135 1600 600 800; 1136 1700 600 800; 1137 1800 600 800; 1138 1900 600 800; 1139 2000 600 800; 1140 2100 600 800; 1141 2200 600 800; 1142 2300 600 800; 1143 2400 600 800; 1144 800 600 900; 1145 1600 600 900; 1146 800 600 1000; 1147 1600 600 1000; 1148 2400 600 1000; 1149 0 600 1100; 1150 800 600 1100; 1151 1600 600 1100; 1152 2400 600 1100; 1153 0 600 1200; 1154 800 600 1200; 1155 1600 600 1200; 1156 2400 600 1200; 1157 0 600 1300; 1158 800 600 1300; 1159 1600 600 1300; 1160 2400 600 1300; 1161 0 600 1400; 1162 800 600 1400; 1163 1600 600 1400; 1164 2400 600 1400; 1165 0 600 1500; 1166 800 600 1500; 1167 1600 600 1500; 1168 2400 600 1500; 1169 0 600 1600; 1170 100 600 1600; 1171 200 600 1600; 1172 300 600 1600; 1173 400 600 1600; 1174 500 600 1600; 1175 600 600 1600; 1176 700 600 1600; 1177 800 600 1600; 1178 900 600 1600; 1179 1000 600 1600; 1180 1100 600 1600; 1181 1200 600 1600; 1182 1300 600 1600; 1183 1400 600 1600; 1184 1500 600 1600; 1185 1600 600 1600; 1186 1700 600 1600; 1187 1800 600 1600; 1188 1900 600 1600; 1189 2000 600 1600; 1190 2100 600 1600; 1191 2200 600 1600; 1192 2300 600 1600; 1193 2400 600 1600; 1194 -400 300 500; 1195 -400 300 600; 1196 -400 300 700; 1197 -400 300 800; 1198 -400 300 900; 1199 -400 300 1000; 1200 -400 300 1100; 1201 -300 300 500; 1202 -300 300 600; 1203 -300 300 700; 1204 -300 300 800; 1205 -300 300 900; 1206 -300 300 1000; 1207 -300 300 1100; 1208 -200 300 500; 1209 -200 300 600; 1210 -200 300 700; 1211 -200 300 800; 1212 -200 300 900; 1213 -200 300 1000; 1214 -200 300 1100; 1215 -100 300 500; 1216 -100 300 600; 1217 -100 300 700; 1218 -100 300 800; 1219 -100 300 900; 1220 -100 300 1000; 1221 -100 300 1100; 1222 -400 400 500; 1223 -400 400 600; 1224 -400 400 700; 1225 -400 400 800; 1226 -400 400 900; 1227 -400 400 1000; 1228 -400 400 1100; 1229 -300 400 500; 1230 -300 400 1100; 1231 -200 400 500; 1232 -200 400 600; 1233 -200 400 700; 1234 -200 400 800; 1235 -200 400 900; 1236 -200 400 1000; 1237 -200 400 1100; 1238 -100 400 500; 1239 -100 400 800; 1240 -100 400 1100; 1241 -400 500 500; 1242 -400 500 600; 1243 -400 500 700; 1244 -400 500 800; 1245 -400 500 900; 1246 -400 500 1000; 1247 -400 500 1100; 1248 -300 500 500; 1249 -300 500 1100; 1250 -200 500 500; 1251 -200 500 600; 1252 -200 500 700; 1253 -200 500 800; 1254 -200 500 900; 1255 -200 500 1000; 1256 -200 500 1100; 1257 -100 500 500; 1258 -100 500 800; 1259 -100 500 1100; 1260 -400 600 500; 1261 -400 600 600; 1262 -400 600 700; 1263 -400 600 800; 1264 -400 600 900; 1265 -400 600 1000; 1266 -400 600 1100; 1267 -200 600 500; 1268 -200 600 600; 1269 -200 600 700; 1270 -200 600 800; 1271 -200 600 900; 1272 -200 600 1000; 1273 -200 600 1100; 1274 -300 600 500; 1275 -100 600 500; 1276 -100 600 800; 1277 -300 600 1100; 1278 -100 600 1100; 1279 -400 0 500; 1280 -400 0 1100; 1281 2500 300 0; 1282 2500 300 100; 1283 2500 300 200; 1284 2500 300 300; 1285 2500 300 400; 1286 2500 300 500; 1287 2500 300 600; 1288 2500 300 700; 1289 2500 300 800; 1290 2500 300 900; 1291 2500 300 1000; 1292 2500 300 1100; 1293 2500 300 1200; 1294 2500 300 1300; 1295 2500 300 1400; 1296 2500 300 1500; 1297 2500 300 1600; 1298 2600 300 0; 1299 2600 300 100; 1300 2600 300 200; 1301 2600 300 300; 1302 2600 300 400; 1303 2600 300 500; 1304 2600 300 600; 1305 2600 300 700; 1306 2600 300 800; 1307 2600 300 900; 1308 2600 300 1000; 1309 2600 300 1100; 1310 2600 300 1200; 1311 2600 300 1300; 1312 2600 300 1400; 1313 2600 300 1500; 1314 2600 300 1600; 1315 2600 400 0; 1316 2600 400 100; 1317 2600 400 200; 1318 2600 400 300; 1319 2600 400 400; 1320 2600 400 500; 1321 2600 400 600; 1322 2600 400 700; 1323 2600 400 800; 1324 2600 400 900; 1325 2600 400 1000; 1326 2600 400 1100; 1327 2600 400 1200; 1328 2600 400 1300; 1329 2600 400 1400; 1330 2600 400 1500; 1331 2600 400 1600; 1332 2600 500 0; 1333 2600 500 100; 1334 2600 500 200; 1335 2600 500 300; 1336 2600 500 400; 1337 2600 500 500; 1338 2600 500 600; 1339 2600 500 700; 1340 2600 500 800; 1341 2600 500 900; 1342 2600 500 1000; 1343 2600 500 1100; 1344 2600 500 1200; 1345 2600 500 1300; 1346 2600 500 1400; 1347 2600 500 1500; 1348 2600 500 1600; 1349 2600 600 0; 1350 2600 600 100; 1351 2600 600 200; 1352 2600 600 300; 1353 2600 600 400; 1354 2600 600 500; 1355 2600 600 600; 1356 2600 600 700; 1357 2600 600 800; 1358 2600 600 900; 1359 2600 600 1000; 1360 2600 600 1100; 1361 2600 600 1200; 1362 2600 600 1300; 1363 2600 600 1400; 1364 2600 600 1500; 1365 2600 600 1600; 1366 400 600 400; 1367 400 600 1200; 1368 1200 600 400; 1369 1200 600 1200; 1370 2000 600 400; 1371 2000 600 1200; 1372 2600 0 0; 1373 2600 0 1600; 1374 2600 0 800; MEMBER INCIDENCES 1 1 2; 2 2 3; 3 3 4; 4 4 5; 5 5 6; 6 6 7; 7 7 8; 8 8 9; 9 9 10; 10 10 11; 11 11 12; 12 12 13; 13 13 14; 14 14 15; 15 15 16; 16 16 17; 17 17 18; 18 18 19; 19 19 20; 20 20 21; 21 21 22; 22 22 23; 23 23 24; 24 24 25; 25 26 27; 26 27 28; 27 28 29; 28 29 30; 29 30 31; 30 31 32; 31 32 33; 32 33 34; 33 34 35; 34 35 36; 35 36 37; 36 37 38; 37 38 39; 38 39 40; 39 40 41; 40 41 42; 41 42 43; 42 43 44; 43 44 45; 44 45 46; 45 46 47; 46 47 48; 47 48 49; 48 49 50; 49 51 52; 50 52 53; 51 53 54; 52 54 55; 53 55 56; 54 56 57; 55 57 58; 56 58 59; 57 59 60; 58 60 61; Page: 4 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 59 61 62; 60 62 63; 61 63 64; 62 64 65; 63 65 66; 64 66 67; 65 67 68; 66 68 69; 67 69 70; 68 70 71; 69 71 72; 70 72 73; 71 73 74; 72 74 75; 73 76 77; 74 77 78; 75 78 79; 76 79 80; 77 80 81; 78 81 82; 79 82 83; 80 83 84; 81 84 85; 82 85 86; 83 86 87; 84 87 88; 85 88 89; 86 89 90; 87 90 91; 88 91 92; 89 92 93; 90 93 94; 91 94 95; 92 95 96; 93 96 97; 94 97 98; 95 98 99; 96 99 100; 97 101 102; 98 102 103; 99 103 104; 100 104 105; 101 105 106; 102 106 107; 103 107 108; 104 108 109; 105 109 110; 106 110 111; 107 111 112; 108 112 113; 109 113 114; 110 114 115; 111 115 116; 112 116 117; 113 117 118; 114 118 119; 115 119 120; 116 120 121; 117 121 122; 118 122 123; 119 123 124; 120 124 125; 121 126 127; 122 127 128; 123 128 129; 124 129 130; 125 130 131; 126 131 132; 127 132 133; 128 133 134; 129 134 135; 130 135 136; 131 136 137; 132 137 138; 133 138 139; 134 139 140; 135 140 141; 136 141 142; 137 142 143; 138 143 144; 139 144 145; 140 145 146; 141 146 147; 142 147 148; 143 148 149; 144 149 150; 145 151 152; 146 152 153; 147 153 154; 148 154 155; 149 155 156; 150 156 157; 151 157 158; 152 158 159; 153 159 160; 154 160 161; 155 161 162; 156 162 163; 157 163 164; 158 164 165; 159 165 166; 160 166 167; 161 167 168; 162 168 169; 163 169 170; 164 170 171; 165 171 172; 166 172 173; 167 173 174; 168 174 175; 169 176 177; 170 177 178; 171 178 179; 172 179 180; 173 180 181; 174 181 182; 175 182 183; 176 183 184; 177 184 185; 178 185 186; 179 186 187; 180 187 188; 181 188 189; 182 189 190; 183 190 191; 184 191 192; 185 192 193; 186 193 194; 187 194 195; 188 195 196; 189 196 197; 190 197 198; 191 198 199; 192 199 200; 193 201 202; 194 202 203; 195 203 204; 196 204 205; 197 205 206; 198 206 207; 199 207 208; 200 208 209; 201 209 210; 202 210 211; 203 211 212; 204 212 213; 205 213 214; 206 214 215; 207 215 216; 208 216 217; 209 217 218; 210 218 219; 211 219 220; 212 220 221; 213 221 222; 214 222 223; 215 223 224; 216 224 225; 217 226 227; 218 227 228; 219 228 229; 220 229 230; 221 230 231; 222 231 232; 223 232 233; 224 233 234; 225 234 235; 226 235 236; 227 236 237; 228 237 238; 229 238 239; 230 239 240; 231 240 241; 232 241 242; 233 242 243; 234 243 244; 235 244 245; 236 245 246; 237 246 247; 238 247 248; 239 248 249; 240 249 250; 241 251 252; 242 252 253; 243 253 254; 244 254 255; 245 255 256; 246 256 257; 247 257 258; 248 258 259; 249 259 260; 250 260 261; 251 261 262; 252 262 263; 253 263 264; 254 264 265; 255 265 266; 256 266 267; 257 267 268; 258 268 269; 259 269 270; 260 270 271; 261 271 272; 262 272 273; 263 273 274; 264 274 275; 265 276 277; 266 277 278; 267 278 279; 268 279 280; 269 280 281; 270 281 282; 271 282 283; 272 283 284; 273 284 285; 274 285 286; 275 286 287; 276 287 288; 277 288 289; 278 289 290; 279 290 291; 280 291 292; 281 292 293; 282 293 294; 283 294 295; 284 295 296; 285 296 297; 286 297 298; 287 298 299; 288 299 300; 289 301 302; 290 302 303; 291 303 304; 292 304 305; 293 305 306; 294 306 307; 295 307 308; 296 308 309; 297 309 310; 298 310 311; 299 311 312; 300 312 313; 301 313 314; 302 314 315; 303 315 316; 304 316 317; 305 317 318; 306 318 319; 307 319 320; 308 320 321; 309 321 322; 310 322 323; 311 323 324; 312 324 325; 313 326 327; 314 327 328; 315 328 329; 316 329 330; 317 330 331; 318 331 332; 319 332 333; 320 333 334; 321 334 335; 322 335 336; 323 336 337; 324 337 338; 325 338 339; 326 339 340; 327 340 341; 328 341 342; 329 342 343; 330 343 344; 331 344 345; 332 345 346; 333 346 347; 334 347 348; 335 348 349; 336 349 350; 337 351 352; 338 352 353; 339 353 354; 340 354 355; 341 355 356; 342 356 357; 343 357 358; 344 358 359; 345 359 360; 346 360 361; 347 361 362; 348 362 363; 349 363 364; 350 364 365; 351 365 366; 352 366 367; 353 367 368; 354 368 369; 355 369 370; 356 370 371; 357 371 372; 358 372 373; 359 373 374; 360 374 375; 361 376 377; 362 377 378; 363 378 379; 364 379 380; 365 380 381; 366 381 382; 367 382 383; 368 383 384; 369 384 385; 370 385 386; 371 386 387; 372 387 388; 373 388 389; 374 389 390; 375 390 391; 376 391 392; 377 392 393; 378 393 394; 379 394 395; 380 395 396; 381 396 397; 382 397 398; 383 398 399; 384 399 400; 385 401 402; 386 402 403; 387 403 404; 388 404 405; 389 405 406; 390 406 407; 391 407 408; 392 408 409; 393 409 410; 394 410 411; 395 411 412; 396 412 413; 397 413 414; 398 414 415; 399 415 416; 400 416 417; 401 417 418; 402 418 419; 403 419 420; 404 420 421; 405 421 422; 406 422 423; 407 423 424; 408 424 425; 409 1 26; 410 26 51; 411 51 76; 412 76 101; 413 101 126; 414 126 151; 415 151 176; 416 176 201; 417 201 226; 418 226 251; 419 251 276; 420 276 301; 421 301 326; 422 326 351; 423 351 376; 424 376 401; 425 2 27; 426 27 52; 427 52 77; 428 77 102; 429 102 127; 430 127 152; 431 152 177; 432 177 202; 433 202 227; 434 227 252; 435 252 277; 436 277 302; 437 302 327; 438 327 352; 439 352 377; 440 377 402; 441 3 28; 442 28 53; 443 53 78; 444 78 103; 445 103 128; 446 128 153; 447 153 178; 448 178 203; 449 203 228; 450 228 253; 451 253 278; 452 278 303; 453 303 328; 454 328 353; 455 353 378; 456 378 403; 457 4 29; 458 29 54; 459 54 79; 460 79 104; 461 104 129; 462 129 154; 463 154 179; 464 179 204; 465 204 229; 466 229 254; 467 254 279; 468 279 304; 469 304 329; 470 329 354; 471 354 379; 472 379 404; 473 5 30; 474 30 55; 475 55 80; 476 80 105; 477 105 130; 478 130 155; 479 155 180; 480 180 205; 481 205 230; 482 230 255; 483 255 280; 484 280 305; 485 305 330; 486 330 355; 487 355 380; 488 380 405; 489 6 31; 490 31 56; 491 56 81; 492 81 106; 493 106 131; 494 131 156; 495 156 181; 496 181 206; 497 206 231; 498 231 256; 499 256 281; 500 281 306; 501 306 331; 502 331 356; 503 356 381; 504 381 406; 505 7 32; 506 32 57; 507 57 82; 508 82 107; 509 107 132; 510 132 157; 511 157 182; 512 182 207; 513 207 232; 514 232 257; 515 257 282; 516 282 307; 517 307 332; 518 332 357; 519 357 382; 520 382 407; 521 8 33; 522 33 58; 523 58 83; 524 83 108; 525 108 133; 526 133 158; 527 158 183; 528 183 208; 529 208 233; 530 233 258; 531 258 283; 532 283 308; 533 308 333; 534 333 358; 535 358 383; 536 383 408; 537 9 34; 538 34 59; 539 59 84; 540 84 109; 541 109 134; 542 134 159; 543 159 184; 544 184 209; 545 209 234; 546 234 259; 547 259 284; 548 284 309; 549 309 334; 550 334 359; 551 359 384; 552 384 409; 553 10 35; 554 35 60; 555 60 85; 556 85 110; 557 110 135; 558 135 160; 559 160 185; 560 185 210; 561 210 235; 562 235 260; 563 260 285; 564 285 310; 565 310 335; 566 335 360; 567 360 385; 568 385 410; 569 11 36; 570 36 61; 571 61 86; Page: 5 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 572 86 111; 573 111 136; 574 136 161; 575 161 186; 576 186 211; 577 211 236; 578 236 261; 579 261 286; 580 286 311; 581 311 336; 582 336 361; 583 361 386; 584 386 411; 585 12 37; 586 37 62; 587 62 87; 588 87 112; 589 112 137; 590 137 162; 591 162 187; 592 187 212; 593 212 237; 594 237 262; 595 262 287; 596 287 312; 597 312 337; 598 337 362; 599 362 387; 600 387 412; 601 13 38; 602 38 63; 603 63 88; 604 88 113; 605 113 138; 606 138 163; 607 163 188; 608 188 213; 609 213 238; 610 238 263; 611 263 288; 612 288 313; 613 313 338; 614 338 363; 615 363 388; 616 388 413; 617 14 39; 618 39 64; 619 64 89; 620 89 114; 621 114 139; 622 139 164; 623 164 189; 624 189 214; 625 214 239; 626 239 264; 627 264 289; 628 289 314; 629 314 339; 630 339 364; 631 364 389; 632 389 414; 633 15 40; 634 40 65; 635 65 90; 636 90 115; 637 115 140; 638 140 165; 639 165 190; 640 190 215; 641 215 240; 642 240 265; 643 265 290; 644 290 315; 645 315 340; 646 340 365; 647 365 390; 648 390 415; 649 16 41; 650 41 66; 651 66 91; 652 91 116; 653 116 141; 654 141 166; 655 166 191; 656 191 216; 657 216 241; 658 241 266; 659 266 291; 660 291 316; 661 316 341; 662 341 366; 663 366 391; 664 391 416; 665 17 42; 666 42 67; 667 67 92; 668 92 117; 669 117 142; 670 142 167; 671 167 192; 672 192 217; 673 217 242; 674 242 267; 675 267 292; 676 292 317; 677 317 342; 678 342 367; 679 367 392; 680 392 417; 681 18 43; 682 43 68; 683 68 93; 684 93 118; 685 118 143; 686 143 168; 687 168 193; 688 193 218; 689 218 243; 690 243 268; 691 268 293; 692 293 318; 693 318 343; 694 343 368; 695 368 393; 696 393 418; 697 19 44; 698 44 69; 699 69 94; 700 94 119; 701 119 144; 702 144 169; 703 169 194; 704 194 219; 705 219 244; 706 244 269; 707 269 294; 708 294 319; 709 319 344; 710 344 369; 711 369 394; 712 394 419; 713 20 45; 714 45 70; 715 70 95; 716 95 120; 717 120 145; 718 145 170; 719 170 195; 720 195 220; 721 220 245; 722 245 270; 723 270 295; 724 295 320; 725 320 345; 726 345 370; 727 370 395; 728 395 420; 729 21 46; 730 46 71; 731 71 96; 732 96 121; 733 121 146; 734 146 171; 735 171 196; 736 196 221; 737 221 246; 738 246 271; 739 271 296; 740 296 321; 741 321 346; 742 346 371; 743 371 396; 744 396 421; 745 22 47; 746 47 72; 747 72 97; 748 97 122; 749 122 147; 750 147 172; 751 172 197; 752 197 222; 753 222 247; 754 247 272; 755 272 297; 756 297 322; 757 322 347; 758 347 372; 759 372 397; 760 397 422; 761 23 48; 762 48 73; 763 73 98; 764 98 123; 765 123 148; 766 148 173; 767 173 198; 768 198 223; 769 223 248; 770 248 273; 771 273 298; 772 298 323; 773 323 348; 774 348 373; 775 373 398; 776 398 423; 777 24 49; 778 49 74; 779 74 99; 780 99 124; 781 124 149; 782 149 174; 783 174 199; 784 199 224; 785 224 249; 786 249 274; 787 274 299; 788 299 324; 789 324 349; 790 349 374; 791 374 399; 792 399 424; 793 25 50; 794 50 75; 795 75 100; 796 100 125; 797 125 150; 798 150 175; 799 175 200; 800 200 225; 801 225 250; 802 250 275; 803 275 300; 804 300 325; 805 325 350; 806 350 375; 807 375 400; 808 400 425; 809 426 427; 810 427 428; 811 428 429; 812 429 430; 813 430 431; 814 431 432; 815 432 433; 816 433 434; 817 434 435; 818 435 436; 819 436 437; 820 437 438; 821 438 439; 822 439 440; 823 440 441; 824 441 442; 825 442 443; 826 443 444; 827 444 445; 828 445 446; 829 446 447; 830 447 448; 831 448 449; 832 449 450; 833 479 480; 834 480 481; 835 481 482; 836 482 483; 837 483 484; 838 484 485; 839 485 486; 840 486 487; 841 487 488; 842 488 489; 843 489 490; 844 490 491; 845 491 492; 846 492 493; 847 493 494; 848 494 495; 849 495 496; 850 496 497; 851 497 498; 852 498 499; 853 499 500; 854 500 501; 855 501 502; 856 502 503; 857 532 533; 858 533 534; 859 534 535; 860 535 536; 861 536 537; 862 537 538; 863 538 539; 864 539 540; 865 540 541; 866 541 542; 867 542 543; 868 543 544; 869 544 545; 870 545 546; 871 546 547; 872 547 548; 873 548 549; 874 549 550; 875 550 551; 876 551 552; 877 552 553; 878 553 554; 879 554 555; 880 555 556; 881 426 451; 882 451 455; 883 455 459; 884 459 463; 885 463 467; 886 467 471; 887 471 475; 888 475 479; 889 479 504; 890 504 508; 891 508 512; 892 512 516; 893 516 520; 894 520 524; 895 524 528; 896 528 532; 897 434 452; 898 452 456; 899 456 460; 900 460 464; 901 464 468; 902 468 472; 903 472 476; 904 476 487; 905 487 505; 906 505 509; 907 509 513; 908 513 517; 909 517 521; 910 521 525; 911 525 529; 912 529 540; 913 442 453; 914 453 457; 915 457 461; 916 461 465; 917 465 469; 918 469 473; 919 473 477; 920 477 495; 921 495 506; 922 506 510; 923 510 514; 924 514 518; 925 518 522; 926 522 526; 927 526 530; 928 530 548; 929 450 454; 930 454 458; 931 458 462; 932 462 466; 933 466 470; 934 470 474; 935 474 478; 936 478 503; 937 503 507; 938 507 511; 939 511 515; 940 515 519; 941 519 523; 942 523 527; 943 527 531; 944 531 556; 945 557 558; 946 558 559; 947 559 560; 948 560 561; 949 561 562; 950 562 563; 951 563 564; 952 564 565; 953 565 566; 954 566 567; 955 567 568; 956 568 569; 957 569 570; 958 570 571; 959 571 572; 960 572 573; 961 573 574; 962 574 575; 963 575 576; 964 576 577; 965 577 578; 966 578 579; 967 579 580; 968 580 581; 969 610 611; 970 611 612; 971 612 613; 972 613 614; 973 614 615; 974 615 616; 975 616 617; 976 617 618; 977 618 619; 978 619 620; 979 620 621; 980 621 622; 981 622 623; 982 623 624; 983 624 625; 984 625 626; 985 626 627; 986 627 628; 987 628 629; 988 629 630; 989 630 631; 990 631 632; 991 632 633; 992 633 634; 993 663 664; 994 664 665; 995 665 666; 996 666 667; 997 667 668; 998 668 669; 999 669 670; 1000 670 671; 1001 671 672; 1002 672 673; 1003 673 674; 1004 674 675; 1005 675 676; 1006 676 677; 1007 677 678; 1008 678 679; 1009 679 680; 1010 680 681; 1011 681 682; 1012 682 683; 1013 683 684; 1014 684 685; 1015 685 686; 1016 686 687; 1017 557 582; 1018 582 586; 1019 586 590; 1020 590 594; 1021 594 598; 1022 598 602; 1023 602 606; 1024 606 610; 1025 610 635; 1026 635 639; 1027 639 643; 1028 643 647; 1029 647 651; 1030 651 655; 1031 655 659; 1032 659 663; 1033 565 583; 1034 583 587; 1035 587 591; 1036 591 595; 1037 595 599; 1038 599 603; 1039 603 607; 1040 607 618; 1041 618 636; 1042 636 640; 1043 640 644; 1044 644 648; 1045 648 652; 1046 652 656; 1047 656 660; 1048 660 671; 1049 573 584; 1050 584 588; 1051 588 592; 1052 592 596; 1053 596 600; 1054 600 604; 1055 604 608; 1056 608 626; 1057 626 637; 1058 637 641; 1059 641 645; 1060 645 649; 1061 649 653; 1062 653 657; Page: 6 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 1063 1068 1073 1078 1083 1088 1093 1098 1103 1108 1113 1118 1123 1128 1133 1138 1143 1148 1153 1158 1163 1168 1173 1178 1183 1188 1193 1198 1203 1208 1213 1218 1223 1228 1233 1238 1243 1248 1253 1258 1263 1268 1273 1278 1283 1288 1293 1298 1303 1308 1313 1318 1323 1328 1333 1338 1343 1348 1353 1358 1363 1368 1373 1378 1383 1388 1393 1398 1403 1408 1413 1418 1423 1428 1433 1438 1443 1448 1453 1458 1463 1468 1473 1478 657 661; 1064 661 679; 1065 581 585; 1066 585 589; 1067 589 593; 593 597; 1069 597 601; 1070 601 605; 1071 605 609; 1072 609 634; 634 638; 1074 638 642; 1075 642 646; 1076 646 650; 1077 650 654; 654 658; 1079 658 662; 1080 662 687; 1081 688 689; 1082 689 690; 690 691; 1084 691 692; 1085 692 693; 1086 693 694; 1087 694 695; 695 696; 1089 696 697; 1090 697 698; 1091 698 699; 1092 699 700; 700 701; 1094 701 702; 1095 702 703; 1096 703 704; 1097 704 705; 705 706; 1099 706 707; 1100 707 708; 1101 708 709; 1102 709 710; 710 711; 1104 711 712; 1105 741 742; 1106 742 743; 1107 743 744; 744 745; 1109 745 746; 1110 746 747; 1111 747 748; 1112 748 749; 749 750; 1114 750 751; 1115 751 752; 1116 752 753; 1117 753 754; 754 755; 1119 755 756; 1120 756 757; 1121 757 758; 1122 758 759; 759 760; 1124 760 761; 1125 761 762; 1126 762 763; 1127 763 764; 764 765; 1129 794 795; 1130 795 796; 1131 796 797; 1132 797 798; 798 799; 1134 799 800; 1135 800 801; 1136 801 802; 1137 802 803; 803 804; 1139 804 805; 1140 805 806; 1141 806 807; 1142 807 808; 808 809; 1144 809 810; 1145 810 811; 1146 811 812; 1147 812 813; 813 814; 1149 814 815; 1150 815 816; 1151 816 817; 1152 817 818; 688 713; 1154 713 717; 1155 717 721; 1156 721 725; 1157 725 729; 729 733; 1159 733 737; 1160 737 741; 1161 741 766; 1162 766 770; 770 774; 1164 774 778; 1165 778 782; 1166 782 786; 1167 786 790; 790 794; 1169 696 714; 1170 714 718; 1171 718 722; 1172 722 726; 726 730; 1174 730 734; 1175 734 738; 1176 738 749; 1177 749 767; 767 771; 1179 771 775; 1180 775 779; 1181 779 783; 1182 783 787; 787 791; 1184 791 802; 1185 704 715; 1186 715 719; 1187 719 723; 723 727; 1189 727 731; 1190 731 735; 1191 735 739; 1192 739 757; 757 768; 1194 768 772; 1195 772 776; 1196 776 780; 1197 780 784; 784 788; 1199 788 792; 1200 792 810; 1201 712 716; 1202 716 720; 720 724; 1204 724 728; 1205 728 732; 1206 732 736; 1207 736 740; 740 765; 1209 765 769; 1210 769 773; 1211 773 777; 1212 777 781; 781 785; 1214 785 789; 1215 789 793; 1216 793 818; 1217 819 820; 820 821; 1219 821 822; 1220 822 823; 1221 823 824; 1222 824 825; 825 826; 1224 826 827; 1225 827 828; 1226 828 829; 1227 829 830; 830 831; 1229 831 832; 1230 832 833; 1231 833 834; 1232 834 835; 835 836; 1234 836 837; 1235 837 838; 1236 838 839; 1237 839 840; 840 841; 1239 841 842; 1240 842 843; 1241 869 870; 1242 870 871; 871 872; 1244 872 873; 1245 873 874; 1246 874 875; 1247 875 876; 876 877; 1249 877 878; 1250 878 879; 1251 879 880; 1252 880 881; 881 882; 1254 882 883; 1255 883 884; 1256 884 885; 1257 885 886; 886 887; 1259 887 888; 1260 888 889; 1261 889 890; 1262 890 891; 891 892; 1264 892 893; 1265 919 920; 1266 920 921; 1267 921 922; 922 923; 1269 923 924; 1270 924 925; 1271 925 926; 1272 926 927; 927 928; 1274 928 929; 1275 929 930; 1276 930 931; 1277 931 932; 932 933; 1279 933 934; 1280 934 935; 1281 935 936; 1282 936 937; 937 938; 1284 938 939; 1285 939 940; 1286 940 941; 1287 941 942; 942 943; 1289 819 844; 1290 844 848; 1291 848 852; 1292 852 856; 856 860; 1294 899 903; 1295 903 907; 1296 907 911; 1297 911 915; 915 919; 1299 827 845; 1300 845 849; 1301 849 853; 1302 853 857; 857 861; 1304 861 864; 1305 864 867; 1306 867 877; 1307 877 894; 894 896; 1309 896 900; 1310 900 904; 1311 904 908; 1312 908 912; 912 916; 1314 916 927; 1315 835 846; 1316 846 850; 1317 850 854; 854 858; 1319 858 862; 1320 862 865; 1321 865 868; 1322 868 885; 885 895; 1324 895 897; 1325 897 901; 1326 901 905; 1327 905 909; 909 913; 1329 913 917; 1330 917 935; 1331 843 847; 1332 847 851; 851 855; 1334 855 859; 1335 859 863; 1336 863 866; 1337 898 902; 902 906; 1339 906 910; 1340 910 914; 1341 914 918; 1342 918 943; 944 945; 1344 945 946; 1345 946 947; 1346 947 948; 1347 948 949; 949 950; 1349 950 951; 1350 951 952; 1351 952 953; 1352 953 954; 954 955; 1354 955 956; 1355 956 957; 1356 957 958; 1357 958 959; 959 960; 1359 960 961; 1360 961 962; 1361 962 963; 1362 963 964; 964 965; 1364 965 966; 1365 966 967; 1366 967 968; 1367 994 995; 995 996; 1369 996 997; 1370 997 998; 1371 998 999; 1372 999 1000; 1000 1001; 1374 1001 1002; 1375 1002 1003; 1376 1003 1004; 1377 1004 1005; 1005 1006; 1379 1006 1007; 1380 1007 1008; 1381 1008 1009; 1382 1009 1010; 1010 1011; 1384 1011 1012; 1385 1012 1013; 1386 1013 1014; 1387 1014 1015; 1015 1016; 1389 1016 1017; 1390 1017 1018; 1391 1044 1045; 1392 1045 1046; 1046 1047; 1394 1047 1048; 1395 1048 1049; 1396 1049 1050; 1397 1050 1051; 1051 1052; 1399 1052 1053; 1400 1053 1054; 1401 1054 1055; 1402 1055 1056; 1056 1057; 1404 1057 1058; 1405 1058 1059; 1406 1059 1060; 1407 1060 1061; 1061 1062; 1409 1062 1063; 1410 1063 1064; 1411 1064 1065; 1412 1065 1066; 1066 1067; 1414 1067 1068; 1415 944 969; 1416 969 973; 1417 973 977; 977 981; 1419 981 985; 1420 1024 1028; 1421 1028 1032; 1422 1032 1036; 1036 1040; 1424 1040 1044; 1425 952 970; 1426 970 974; 1427 974 978; 978 982; 1429 982 986; 1430 986 989; 1431 989 992; 1432 992 1002; 1002 1019; 1434 1019 1021; 1435 1021 1025; 1436 1025 1029; 1437 1029 1033; 1033 1037; 1439 1037 1041; 1440 1041 1052; 1441 960 971; 1442 971 975; 975 979; 1444 979 983; 1445 983 987; 1446 987 990; 1447 990 993; 993 1010; 1449 1010 1020; 1450 1020 1022; 1451 1022 1026; 1452 1026 1030; 1030 1034; 1454 1034 1038; 1455 1038 1042; 1456 1042 1060; 1457 968 972; 972 976; 1459 976 980; 1460 980 984; 1461 984 988; 1462 988 991; 1023 1027; 1464 1027 1031; 1465 1031 1035; 1466 1035 1039; 1467 1039 1043; 1043 1068; 1469 1069 1070; 1470 1070 1071; 1471 1071 1072; 1472 1072 1073; 1073 1074; 1474 1074 1075; 1475 1075 1076; 1476 1076 1077; 1477 1077 1078; 1078 1079; 1479 1079 1080; 1480 1080 1081; 1481 1081 1082; 1482 1082 1083; Page: 7 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 1483 1488 1493 1498 1503 1508 1513 1518 1523 1528 1533 1538 1543 1548 1553 1558 1563 1568 1573 1578 1583 1588 1593 1598 1603 1608 1613 1618 1623 1628 1633 1638 1643 1648 1653 1658 1663 1668 1673 1678 1683 1688 1693 1698 1703 1708 1713 1718 1723 1728 1733 1738 1743 1748 1753 1758 1763 1768 1773 1778 1783 1788 1793 1798 1803 1808 1813 1818 1823 1828 1833 1838 1843 1848 1853 1858 1863 1868 1873 1878 1883 1888 1893 1898 1083 1084; 1484 1084 1085; 1485 1085 1086; 1486 1086 1087; 1487 1087 1088 1089; 1489 1089 1090; 1490 1090 1091; 1491 1091 1092; 1492 1092 1119 1120; 1494 1120 1121; 1495 1121 1122; 1496 1122 1123; 1497 1123 1124 1125; 1499 1125 1126; 1500 1126 1127; 1501 1127 1128; 1502 1128 1129 1130; 1504 1130 1131; 1505 1131 1132; 1506 1132 1133; 1507 1133 1134 1135; 1509 1135 1136; 1510 1136 1137; 1511 1137 1138; 1512 1138 1139 1140; 1514 1140 1141; 1515 1141 1142; 1516 1142 1143; 1517 1169 1170 1171; 1519 1171 1172; 1520 1172 1173; 1521 1173 1174; 1522 1174 1175 1176; 1524 1176 1177; 1525 1177 1178; 1526 1178 1179; 1527 1179 1180 1181; 1529 1181 1182; 1530 1182 1183; 1531 1183 1184; 1532 1184 1185 1186; 1534 1186 1187; 1535 1187 1188; 1536 1188 1189; 1537 1189 1190 1191; 1539 1191 1192; 1540 1192 1193; 1541 1069 1094; 1542 1094 1098 1102; 1544 1102 1106; 1545 1106 1110; 1546 1149 1153; 1547 1153 1157 1161; 1549 1161 1165; 1550 1165 1169; 1551 1077 1095; 1552 1095 1099 1103; 1554 1103 1107; 1555 1107 1111; 1556 1111 1114; 1557 1114 1117 1127; 1559 1127 1144; 1560 1144 1146; 1561 1146 1150; 1562 1150 1154 1158; 1564 1158 1162; 1565 1162 1166; 1566 1166 1177; 1567 1085 1096 1100; 1569 1100 1104; 1570 1104 1108; 1571 1108 1112; 1572 1112 1115 1118; 1574 1118 1135; 1575 1135 1145; 1576 1145 1147; 1577 1147 1151 1155; 1579 1155 1159; 1580 1159 1163; 1581 1163 1167; 1582 1167 1093 1097; 1584 1097 1101; 1585 1101 1105; 1586 1105 1109; 1587 1109 1113 1116; 1589 1148 1152; 1590 1152 1156; 1591 1156 1160; 1592 1160 1164 1168; 1594 1168 1193; 1595 1 426; 1596 426 557; 1597 557 688; 688 819; 1599 819 944; 1600 944 1069; 1601 2 427; 1602 427 558; 558 689; 1604 689 820; 1605 820 945; 1606 945 1070; 1607 3 428; 428 559; 1609 559 690; 1610 690 821; 1611 821 946; 1612 946 1071; 4 429; 1614 429 560; 1615 560 691; 1616 691 822; 1617 822 947; 947 1072; 1619 5 430; 1620 430 561; 1621 561 692; 1622 692 823; 823 948; 1624 948 1073; 1625 6 431; 1626 431 562; 1627 562 693; 693 824; 1629 824 949; 1630 949 1074; 1631 7 432; 1632 432 563; 563 694; 1634 694 825; 1635 825 950; 1636 950 1075; 1637 8 433; 433 564; 1639 564 695; 1640 695 826; 1641 826 951; 1642 951 1076; 9 434; 1644 434 565; 1645 565 696; 1646 696 827; 1647 827 952; 952 1077; 1649 10 435; 1650 435 566; 1651 566 697; 1652 697 828; 828 953; 1654 953 1078; 1655 11 436; 1656 436 567; 1657 567 698; 698 829; 1659 829 954; 1660 954 1079; 1661 12 437; 1662 437 568; 568 699; 1664 699 830; 1665 830 955; 1666 955 1080; 1667 13 438; 438 569; 1669 569 700; 1670 700 831; 1671 831 956; 1672 956 1081; 14 439; 1674 439 570; 1675 570 701; 1676 701 832; 1677 832 957; 957 1082; 1679 15 440; 1680 440 571; 1681 571 702; 1682 702 833; 833 958; 1684 958 1083; 1685 16 441; 1686 441 572; 1687 572 703; 703 834; 1689 834 959; 1690 959 1084; 1691 17 442; 1692 442 573; 573 704; 1694 704 835; 1695 835 960; 1696 960 1085; 1697 18 443; 443 574; 1699 574 705; 1700 705 836; 1701 836 961; 1702 961 1086; 19 444; 1704 444 575; 1705 575 706; 1706 706 837; 1707 837 962; 962 1087; 1709 20 445; 1710 445 576; 1711 576 707; 1712 707 838; 838 963; 1714 963 1088; 1715 21 446; 1716 446 577; 1717 577 708; 708 839; 1719 839 964; 1720 964 1089; 1721 22 447; 1722 447 578; 578 709; 1724 709 840; 1725 840 965; 1726 965 1090; 1727 23 448; 448 579; 1729 579 710; 1730 710 841; 1731 841 966; 1732 966 1091; 24 449; 1734 449 580; 1735 580 711; 1736 711 842; 1737 842 967; 967 1092; 1739 25 450; 1740 450 581; 1741 581 712; 1742 712 843; 843 968; 1744 968 1093; 1745 26 451; 1746 451 582; 1747 582 713; 713 844; 1749 844 969; 1750 969 1094; 1751 34 452; 1752 452 583; 583 714; 1754 714 845; 1755 845 970; 1756 970 1095; 1757 42 453; 453 584; 1759 584 715; 1760 715 846; 1761 846 971; 1762 971 1096; 50 454; 1764 454 585; 1765 585 716; 1766 716 847; 1767 847 972; 972 1097; 1769 51 455; 1770 455 586; 1771 586 717; 1772 717 848; 848 973; 1774 973 1098; 1775 59 456; 1776 456 587; 1777 587 718; 718 849; 1779 849 974; 1780 974 1099; 1781 67 457; 1782 457 588; 588 719; 1784 719 850; 1785 850 975; 1786 975 1100; 1787 75 458; 458 589; 1789 589 720; 1790 720 851; 1791 851 976; 1792 976 1101; 76 459; 1794 459 590; 1795 590 721; 1796 721 852; 1797 852 977; 977 1102; 1799 84 460; 1800 460 591; 1801 591 722; 1802 722 853; 853 978; 1804 978 1103; 1805 92 461; 1806 461 592; 1807 592 723; 723 854; 1809 854 979; 1810 979 1104; 1811 100 462; 1812 462 593; 593 724; 1814 724 855; 1815 855 980; 1816 980 1105; 1817 101 463; 463 594; 1819 594 725; 1820 725 856; 1821 856 981; 1822 981 1106; 109 464; 1824 464 595; 1825 595 726; 1826 726 857; 1827 857 982; 982 1107; 1829 117 465; 1830 465 596; 1831 596 727; 1832 727 858; 858 983; 1834 983 1108; 1835 125 466; 1836 466 597; 1837 597 728; 728 859; 1839 859 984; 1840 984 1109; 1841 126 467; 1842 467 598; 598 729; 1844 729 860; 1845 860 985; 1846 985 1110; 1847 134 468; 468 599; 1849 599 730; 1850 730 861; 1851 861 986; 1852 986 1111; 142 469; 1854 469 600; 1855 600 731; 1856 731 862; 1857 862 987; 987 1112; 1859 150 470; 1860 470 601; 1861 601 732; 1862 732 863; 863 988; 1864 988 1113; 1865 151 471; 1866 471 602; 1867 602 733; 159 472; 1869 472 603; 1870 603 734; 1871 734 864; 1872 864 989; 989 1114; 1874 167 473; 1875 473 604; 1876 604 735; 1877 735 865; 865 990; 1879 990 1115; 1880 175 474; 1881 474 605; 1882 605 736; 736 866; 1884 866 991; 1885 991 1116; 1886 176 475; 1887 475 606; 606 737; 1889 184 476; 1890 476 607; 1891 607 738; 1892 738 867; 867 992; 1894 992 1117; 1895 192 477; 1896 477 608; 1897 608 739; 739 868; 1899 868 993; 1900 993 1118; 1901 200 478; 1902 478 609; Page: 8 1088; 1093; 1124; 1129; 1134; 1139; 1170; 1175; 1180; 1185; 1190; 1098; 1157; 1099; 1117; 1154; 1096; 1115; 1151; 1185; 1113; 1164; C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 1903 1908 1913 1918 1923 1928 1933 1938 1943 1948 1953 1958 1963 1968 1973 1978 1983 1988 1993 1998 2003 2008 2013 2018 2023 2028 2033 2038 2043 2048 2053 2058 2063 2068 2073 2078 2083 2088 2093 2098 2103 2108 2113 2118 2123 2128 2133 2138 2143 2148 2153 2158 2163 2168 2173 2178 2183 2188 2193 2198 2203 2208 2213 2218 2223 2228 2233 2238 2243 2248 2253 2258 2263 2268 2273 2278 2283 2288 2293 2298 2303 2308 2313 2318 609 740; 1904 201 479; 1905 479 610; 1906 610 741; 1907 741 869; 869 994; 1909 994 1119; 1910 202 480; 1911 480 611; 1912 611 742; 742 870; 1914 870 995; 1915 995 1120; 1916 203 481; 1917 481 612; 612 743; 1919 743 871; 1920 871 996; 1921 996 1121; 1922 204 482; 482 613; 1924 613 744; 1925 744 872; 1926 872 997; 1927 997 1122; 205 483; 1929 483 614; 1930 614 745; 1931 745 873; 1932 873 998; 998 1123; 1934 206 484; 1935 484 615; 1936 615 746; 1937 746 874; 874 999; 1939 999 1124; 1940 207 485; 1941 485 616; 1942 616 747; 747 875; 1944 875 1000; 1945 1000 1125; 1946 208 486; 1947 486 617; 617 748; 1949 748 876; 1950 876 1001; 1951 1001 1126; 1952 209 487; 487 618; 1954 618 749; 1955 749 877; 1956 877 1002; 1957 1002 1127; 210 488; 1959 488 619; 1960 619 750; 1961 750 878; 1962 878 1003; 1003 1128; 1964 211 489; 1965 489 620; 1966 620 751; 1967 751 879; 879 1004; 1969 1004 1129; 1970 212 490; 1971 490 621; 1972 621 752; 752 880; 1974 880 1005; 1975 1005 1130; 1976 213 491; 1977 491 622; 622 753; 1979 753 881; 1980 881 1006; 1981 1006 1131; 1982 214 492; 492 623; 1984 623 754; 1985 754 882; 1986 882 1007; 1987 1007 1132; 215 493; 1989 493 624; 1990 624 755; 1991 755 883; 1992 883 1008; 1008 1133; 1994 216 494; 1995 494 625; 1996 625 756; 1997 756 884; 884 1009; 1999 1009 1134; 2000 217 495; 2001 495 626; 2002 626 757; 757 885; 2004 885 1010; 2005 1010 1135; 2006 218 496; 2007 496 627; 627 758; 2009 758 886; 2010 886 1011; 2011 1011 1136; 2012 219 497; 497 628; 2014 628 759; 2015 759 887; 2016 887 1012; 2017 1012 1137; 220 498; 2019 498 629; 2020 629 760; 2021 760 888; 2022 888 1013; 1013 1138; 2024 221 499; 2025 499 630; 2026 630 761; 2027 761 889; 889 1014; 2029 1014 1139; 2030 222 500; 2031 500 631; 2032 631 762; 762 890; 2034 890 1015; 2035 1015 1140; 2036 223 501; 2037 501 632; 632 763; 2039 763 891; 2040 891 1016; 2041 1016 1141; 2042 224 502; 502 633; 2044 633 764; 2045 764 892; 2046 892 1017; 2047 1017 1142; 225 503; 2049 503 634; 2050 634 765; 2051 765 893; 2052 893 1018; 1018 1143; 2054 226 504; 2055 504 635; 2056 635 766; 2057 234 505; 505 636; 2059 636 767; 2060 767 894; 2061 894 1019; 2062 1019 1144; 242 506; 2064 506 637; 2065 637 768; 2066 768 895; 2067 895 1020; 1020 1145; 2069 250 507; 2070 507 638; 2071 638 769; 2072 251 508; 508 639; 2074 639 770; 2075 259 509; 2076 509 640; 2077 640 771; 771 896; 2079 896 1021; 2080 1021 1146; 2081 267 510; 2082 510 641; 641 772; 2084 772 897; 2085 897 1022; 2086 1022 1147; 2087 275 511; 511 642; 2089 642 773; 2090 773 898; 2091 898 1023; 2092 1023 1148; 276 512; 2094 512 643; 2095 643 774; 2096 774 899; 2097 899 1024; 1024 1149; 2099 284 513; 2100 513 644; 2101 644 775; 2102 775 900; 900 1025; 2104 1025 1150; 2105 292 514; 2106 514 645; 2107 645 776; 776 901; 2109 901 1026; 2110 1026 1151; 2111 300 515; 2112 515 646; 646 777; 2114 777 902; 2115 902 1027; 2116 1027 1152; 2117 301 516; 516 647; 2119 647 778; 2120 778 903; 2121 903 1028; 2122 1028 1153; 309 517; 2124 517 648; 2125 648 779; 2126 779 904; 2127 904 1029; 1029 1154; 2129 317 518; 2130 518 649; 2131 649 780; 2132 780 905; 905 1030; 2134 1030 1155; 2135 325 519; 2136 519 650; 2137 650 781; 781 906; 2139 906 1031; 2140 1031 1156; 2141 326 520; 2142 520 651; 651 782; 2144 782 907; 2145 907 1032; 2146 1032 1157; 2147 334 521; 521 652; 2149 652 783; 2150 783 908; 2151 908 1033; 2152 1033 1158; 342 522; 2154 522 653; 2155 653 784; 2156 784 909; 2157 909 1034; 1034 1159; 2159 350 523; 2160 523 654; 2161 654 785; 2162 785 910; 910 1035; 2164 1035 1160; 2165 351 524; 2166 524 655; 2167 655 786; 786 911; 2169 911 1036; 2170 1036 1161; 2171 359 525; 2172 525 656; 656 787; 2174 787 912; 2175 912 1037; 2176 1037 1162; 2177 367 526; 526 657; 2179 657 788; 2180 788 913; 2181 913 1038; 2182 1038 1163; 375 527; 2184 527 658; 2185 658 789; 2186 789 914; 2187 914 1039; 1039 1164; 2189 376 528; 2190 528 659; 2191 659 790; 2192 790 915; 915 1040; 2194 1040 1165; 2195 384 529; 2196 529 660; 2197 660 791; 791 916; 2199 916 1041; 2200 1041 1166; 2201 392 530; 2202 530 661; 661 792; 2204 792 917; 2205 917 1042; 2206 1042 1167; 2207 400 531; 531 662; 2209 662 793; 2210 793 918; 2211 918 1043; 2212 1043 1168; 401 532; 2214 532 663; 2215 663 794; 2216 794 919; 2217 919 1044; 1044 1169; 2219 402 533; 2220 533 664; 2221 664 795; 2222 795 920; 920 1045; 2224 1045 1170; 2225 403 534; 2226 534 665; 2227 665 796; 796 921; 2229 921 1046; 2230 1046 1171; 2231 404 535; 2232 535 666; 666 797; 2234 797 922; 2235 922 1047; 2236 1047 1172; 2237 405 536; 536 667; 2239 667 798; 2240 798 923; 2241 923 1048; 2242 1048 1173; 406 537; 2244 537 668; 2245 668 799; 2246 799 924; 2247 924 1049; 1049 1174; 2249 407 538; 2250 538 669; 2251 669 800; 2252 800 925; 925 1050; 2254 1050 1175; 2255 408 539; 2256 539 670; 2257 670 801; 801 926; 2259 926 1051; 2260 1051 1176; 2261 409 540; 2262 540 671; 671 802; 2264 802 927; 2265 927 1052; 2266 1052 1177; 2267 410 541; 541 672; 2269 672 803; 2270 803 928; 2271 928 1053; 2272 1053 1178; 411 542; 2274 542 673; 2275 673 804; 2276 804 929; 2277 929 1054; 1054 1179; 2279 412 543; 2280 543 674; 2281 674 805; 2282 805 930; 930 1055; 2284 1055 1180; 2285 413 544; 2286 544 675; 2287 675 806; 806 931; 2289 931 1056; 2290 1056 1181; 2291 414 545; 2292 545 676; 676 807; 2294 807 932; 2295 932 1057; 2296 1057 1182; 2297 415 546; 546 677; 2299 677 808; 2300 808 933; 2301 933 1058; 2302 1058 1183; 416 547; 2304 547 678; 2305 678 809; 2306 809 934; 2307 934 1059; 1059 1184; 2309 417 548; 2310 548 679; 2311 679 810; 2312 810 935; 935 1060; 2314 1060 1185; 2315 418 549; 2316 549 680; 2317 680 811; 811 936; 2319 936 1061; 2320 1061 1186; 2321 419 550; 2322 550 681; Page: 9 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 2323 681 812; 2324 812 937; 2325 937 1062; 2326 1062 1187; 2327 420 551; 2328 551 682; 2329 682 813; 2330 813 938; 2331 938 1063; 2332 1063 1188; 2333 421 552; 2334 552 683; 2335 683 814; 2336 814 939; 2337 939 1064; 2338 1064 1189; 2339 422 553; 2340 553 684; 2341 684 815; 2342 815 940; 2343 940 1065; 2344 1065 1190; 2345 423 554; 2346 554 685; 2347 685 816; 2348 816 941; 2349 941 1066; 2350 1066 1191; 2351 424 555; 2352 555 686; 2353 686 817; 2354 817 942; 2355 942 1067; 2356 1067 1192; 2357 425 556; 2358 556 687; 2359 687 818; 2360 818 943; 2361 943 1068; 2362 1068 1193; 2363 1194 1195; 2364 1195 1196; 2365 1196 1197; 2366 1197 1198; 2367 1198 1199; 2368 1199 1200; 2369 1201 1202; 2370 1202 1203; 2371 1203 1204; 2372 1204 1205; 2373 1205 1206; 2374 1206 1207; 2375 1208 1209; 2376 1209 1210; 2377 1210 1211; 2378 1211 1212; 2379 1212 1213; 2380 1213 1214; 2381 1215 1216; 2382 1216 1217; 2383 1217 1218; 2384 1218 1219; 2385 1219 1220; 2386 1220 1221; 2387 1194 1201; 2388 1201 1208; 2389 1208 1215; 2390 1215 729; 2391 1195 1202; 2392 1202 1209; 2393 1209 1216; 2394 1216 733; 2395 1196 1203; 2396 1203 1210; 2397 1210 1217; 2398 1217 737; 2399 1197 1204; 2400 1204 1211; 2401 1211 1218; 2402 1218 741; 2403 1198 1205; 2404 1205 1212; 2405 1212 1219; 2406 1219 766; 2407 1199 1206; 2408 1206 1213; 2409 1213 1220; 2410 1220 770; 2411 1200 1207; 2412 1207 1214; 2413 1214 1221; 2414 1221 774; 2415 1222 1223; 2416 1223 1224; 2417 1224 1225; 2418 1225 1226; 2419 1226 1227; 2420 1227 1228; 2421 1231 1232; 2422 1232 1233; 2423 1233 1234; 2424 1234 1235; 2425 1235 1236; 2426 1236 1237; 2427 1222 1229; 2428 1229 1231; 2429 1231 1238; 2430 1238 860; 2431 1234 1239; 2432 1239 869; 2433 1228 1230; 2434 1230 1237; 2435 1237 1240; 2436 1240 899; 2437 1241 1242; 2438 1242 1243; 2439 1243 1244; 2440 1244 1245; 2441 1245 1246; 2442 1246 1247; 2443 1250 1251; 2444 1251 1252; 2445 1252 1253; 2446 1253 1254; 2447 1254 1255; 2448 1255 1256; 2449 1241 1248; 2450 1248 1250; 2451 1250 1257; 2452 1257 985; 2453 1253 1258; 2454 1258 994; 2455 1247 1249; 2456 1249 1256; 2457 1256 1259; 2458 1259 1024; 2459 1260 1261; 2460 1261 1262; 2461 1262 1263; 2462 1263 1264; 2463 1264 1265; 2464 1265 1266; 2465 1267 1268; 2466 1269 1270; 2467 1270 1271; 2468 1272 1273; 2469 1260 1274; 2470 1274 1267; 2471 1267 1275; 2472 1275 1110; 2473 1270 1276; 2474 1276 1119; 2475 1266 1277; 2476 1277 1273; 2477 1273 1278; 2478 1278 1149; 2479 1279 1194; 2480 1194 1222; 2481 1222 1241; 2482 1241 1260; 2483 1201 1229; 2484 1229 1248; 2485 1248 1274; 2486 1208 1231; 2487 1231 1250; 2488 1250 1267; 2489 1215 1238; 2490 1238 1257; 2491 1257 1275; 2492 1195 1223; 2493 1223 1242; 2494 1242 1261; 2495 1209 1232; 2496 1232 1251; 2497 1251 1268; 2498 1196 1224; 2499 1224 1243; 2500 1243 1262; 2501 1210 1233; 2502 1233 1252; 2503 1252 1269; 2504 1197 1225; 2505 1225 1244; 2506 1244 1263; 2507 1211 1234; 2508 1234 1253; 2509 1253 1270; 2510 1218 1239; 2511 1239 1258; 2512 1258 1276; 2513 1198 1226; 2514 1226 1245; 2515 1245 1264; 2516 1212 1235; 2517 1235 1254; 2518 1254 1271; 2519 1199 1227; 2520 1227 1246; 2521 1246 1265; 2522 1213 1236; 2523 1236 1255; 2524 1255 1272; 2525 1280 1200; 2526 1200 1228; 2527 1228 1247; 2528 1247 1266; 2529 1207 1230; 2530 1230 1249; 2531 1249 1277; 2532 1214 1237; 2533 1237 1256; 2534 1256 1273; 2535 1221 1240; 2536 1240 1259; 2537 1259 1278; 2538 1281 1282; 2539 1282 1283; 2540 1283 1284; 2541 1284 1285; 2542 1285 1286; 2543 1286 1287; 2544 1287 1288; 2545 1288 1289; 2546 1289 1290; 2547 1290 1291; 2548 1291 1292; 2549 1292 1293; 2550 1293 1294; 2551 1294 1295; 2552 1295 1296; 2553 1296 1297; 2554 1298 1299; 2555 1299 1300; 2556 1300 1301; 2557 1301 1302; 2558 1302 1303; 2559 1303 1304; 2560 1304 1305; 2561 1305 1306; 2562 1306 1307; 2563 1307 1308; 2564 1308 1309; 2565 1309 1310; 2566 1310 1311; 2567 1311 1312; 2568 1312 1313; 2569 1313 1314; 2570 1315 1316; 2571 1316 1317; 2572 1317 1318; 2573 1318 1319; 2574 1319 1320; 2575 1320 1321; 2576 1321 1322; 2577 1322 1323; 2578 1323 1324; 2579 1324 1325; 2580 1325 1326; 2581 1326 1327; 2582 1327 1328; 2583 1328 1329; 2584 1329 1330; 2585 1330 1331; 2586 1332 1333; 2587 1333 1334; 2588 1334 1335; 2589 1335 1336; 2590 1336 1337; 2591 1337 1338; 2592 1338 1339; 2593 1339 1340; 2594 1340 1341; 2595 1341 1342; 2596 1342 1343; 2597 1343 1344; 2598 1344 1345; 2599 1345 1346; 2600 1346 1347; 2601 1347 1348; 2602 1349 1350; 2603 1350 1351; 2604 1351 1352; 2605 1352 1353; 2606 1353 1354; 2607 1354 1355; 2608 1355 1356; 2609 1356 1357; 2610 1357 1358; 2611 1358 1359; 2612 1359 1360; 2613 1360 1361; 2614 1361 1362; 2615 1362 1363; 2616 1363 1364; 2617 1364 1365; 2618 712 1281; 2619 1281 1298; 2620 716 1282; 2621 1282 1299; 2622 720 1283; 2623 1283 1300; 2624 724 1284; 2625 1284 1301; 2626 728 1285; 2627 1285 1302; 2628 732 1286; 2629 1286 1303; 2630 736 1287; 2631 1287 1304; 2632 740 1288; 2633 1288 1305; 2634 765 1289; 2635 1289 1306; 2636 769 1290; 2637 1290 1307; 2638 773 1291; 2639 1291 1308; 2640 777 1292; 2641 1292 1309; 2642 781 1293; 2643 1293 1310; 2644 785 1294; 2645 1294 1311; 2646 789 1295; 2647 1295 1312; 2648 793 1296; 2649 1296 1313; 2650 818 1297; 2651 1297 1314; 2652 1298 1315; 2653 1315 1332; 2654 1332 1349; 2655 1299 1316; 2656 1316 1333; 2657 1333 1350; 2658 1300 1317; 2659 1317 1334; 2660 1334 1351; 2661 1301 1318; 2662 1318 1335; 2663 1335 1352; 2664 1302 1319; 2665 1319 1336; 2666 1336 1353; 2667 1303 1320; 2668 1320 1337; 2669 1337 1354; 2670 1304 1321; 2671 1321 1338; 2672 1338 1355; 2673 1305 1322; 2674 1322 1339; 2675 1339 1356; 2676 1306 1323; 2677 1323 1340; 2678 1340 1357; 2679 1307 1324; 2680 1324 1341; 2681 1341 1358; 2682 1308 1325; 2683 1325 1342; 2684 1342 1359; 2685 1309 1326; 2686 1326 1343; 2687 1343 1360; 2688 1310 1327; 2689 1327 1344; 2690 1344 1361; 2691 1311 1328; 2692 1328 1345; 2693 1345 1362; 2694 1312 1329; 2695 1329 1346; 2696 1346 1363; 2697 1313 1330; 2698 1330 1347; 2699 1347 1364; 2700 1314 1331; 2701 1331 1348; 2702 1348 1365; 2703 1073 1366; 2704 1366 1123; 2705 1123 1367; 2706 1367 1173; 2707 1081 1368; 2708 1368 1131; 2709 1131 1369; 2710 1369 1181; 2711 1089 1370; 2712 1370 1139; 2713 1139 1371; 2714 1371 1189; 2715 1372 1298; 2716 1373 1314; 2717 1374 1306; ELEMENT INCIDENCES SHELL 2718 1 26 27 2; 2719 2 27 28 3; 2720 3 28 29 4; 2721 4 29 30 5; 2722 5 30 31 6; 2723 6 31 32 7; 2724 7 32 33 8; 2725 8 33 34 9; 2726 9 34 35 10; 2727 10 35 36 11; 2728 11 36 37 12; 2729 12 37 38 13; 2730 13 38 39 14; 2731 14 39 40 15; 2732 15 40 41 16; 2733 16 41 42 17; 2734 17 42 43 18; Page: 10 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 2735 2739 2743 2747 2751 2755 2759 2763 2767 2771 2775 2779 2783 2787 2791 2795 2799 2803 2807 2811 2814 2817 2820 2823 2826 2829 2832 2835 2838 2841 2844 2847 2850 2853 2856 2859 2862 2865 2868 2871 2874 2877 2880 2883 2886 2889 2892 2895 2898 2901 2904 2907 2910 2913 2916 2919 2922 2925 2928 2931 2934 2937 2940 2943 2946 2949 2952 2955 2958 2961 2964 2967 2970 2973 2976 2979 2982 2985 2988 2991 2994 2997 3000 3003 18 43 44 19; 2736 19 44 45 20; 2737 20 45 46 21; 2738 21 46 47 22; 22 47 48 23; 2740 23 48 49 24; 2741 24 49 50 25; 2742 26 51 52 27; 27 52 53 28; 2744 28 53 54 29; 2745 29 54 55 30; 2746 30 55 56 31; 31 56 57 32; 2748 32 57 58 33; 2749 33 58 59 34; 2750 34 59 60 35; 35 60 61 36; 2752 36 61 62 37; 2753 37 62 63 38; 2754 38 63 64 39; 39 64 65 40; 2756 40 65 66 41; 2757 41 66 67 42; 2758 42 67 68 43; 43 68 69 44; 2760 44 69 70 45; 2761 45 70 71 46; 2762 46 71 72 47; 47 72 73 48; 2764 48 73 74 49; 2765 49 74 75 50; 2766 51 76 77 52; 52 77 78 53; 2768 53 78 79 54; 2769 54 79 80 55; 2770 55 80 81 56; 56 81 82 57; 2772 57 82 83 58; 2773 58 83 84 59; 2774 59 84 85 60; 60 85 86 61; 2776 61 86 87 62; 2777 62 87 88 63; 2778 63 88 89 64; 64 89 90 65; 2780 65 90 91 66; 2781 66 91 92 67; 2782 67 92 93 68; 68 93 94 69; 2784 69 94 95 70; 2785 70 95 96 71; 2786 71 96 97 72; 72 97 98 73; 2788 73 98 99 74; 2789 74 99 100 75; 2790 76 101 102 77; 77 102 103 78; 2792 78 103 104 79; 2793 79 104 105 80; 2794 80 105 106 81 106 107 82; 2796 82 107 108 83; 2797 83 108 109 84; 2798 84 109 110 85 110 111 86; 2800 86 111 112 87; 2801 87 112 113 88; 2802 88 113 114 89 114 115 90; 2804 90 115 116 91; 2805 91 116 117 92; 2806 92 117 118 93 118 119 94; 2808 94 119 120 95; 2809 95 120 121 96; 2810 96 121 122 97 122 123 98; 2812 98 123 124 99; 2813 99 124 125 100; 101 126 127 102; 2815 102 127 128 103; 2816 103 128 129 104; 104 129 130 105; 2818 105 130 131 106; 2819 106 131 132 107; 107 132 133 108; 2821 108 133 134 109; 2822 109 134 135 110; 110 135 136 111; 2824 111 136 137 112; 2825 112 137 138 113; 113 138 139 114; 2827 114 139 140 115; 2828 115 140 141 116; 116 141 142 117; 2830 117 142 143 118; 2831 118 143 144 119; 119 144 145 120; 2833 120 145 146 121; 2834 121 146 147 122; 122 147 148 123; 2836 123 148 149 124; 2837 124 149 150 125; 126 151 152 127; 2839 127 152 153 128; 2840 128 153 154 129; 129 154 155 130; 2842 130 155 156 131; 2843 131 156 157 132; 132 157 158 133; 2845 133 158 159 134; 2846 134 159 160 135; 135 160 161 136; 2848 136 161 162 137; 2849 137 162 163 138; 138 163 164 139; 2851 139 164 165 140; 2852 140 165 166 141; 141 166 167 142; 2854 142 167 168 143; 2855 143 168 169 144; 144 169 170 145; 2857 145 170 171 146; 2858 146 171 172 147; 147 172 173 148; 2860 148 173 174 149; 2861 149 174 175 150; 151 176 177 152; 2863 152 177 178 153; 2864 153 178 179 154; 154 179 180 155; 2866 155 180 181 156; 2867 156 181 182 157; 157 182 183 158; 2869 158 183 184 159; 2870 159 184 185 160; 160 185 186 161; 2872 161 186 187 162; 2873 162 187 188 163; 163 188 189 164; 2875 164 189 190 165; 2876 165 190 191 166; 166 191 192 167; 2878 167 192 193 168; 2879 168 193 194 169; 169 194 195 170; 2881 170 195 196 171; 2882 171 196 197 172; 172 197 198 173; 2884 173 198 199 174; 2885 174 199 200 175; 176 201 202 177; 2887 177 202 203 178; 2888 178 203 204 179; 179 204 205 180; 2890 180 205 206 181; 2891 181 206 207 182; 182 207 208 183; 2893 183 208 209 184; 2894 184 209 210 185; 185 210 211 186; 2896 186 211 212 187; 2897 187 212 213 188; 188 213 214 189; 2899 189 214 215 190; 2900 190 215 216 191; 191 216 217 192; 2902 192 217 218 193; 2903 193 218 219 194; 194 219 220 195; 2905 195 220 221 196; 2906 196 221 222 197; 197 222 223 198; 2908 198 223 224 199; 2909 199 224 225 200; 201 226 227 202; 2911 202 227 228 203; 2912 203 228 229 204; 204 229 230 205; 2914 205 230 231 206; 2915 206 231 232 207; 207 232 233 208; 2917 208 233 234 209; 2918 209 234 235 210; 210 235 236 211; 2920 211 236 237 212; 2921 212 237 238 213; 213 238 239 214; 2923 214 239 240 215; 2924 215 240 241 216; 216 241 242 217; 2926 217 242 243 218; 2927 218 243 244 219; 219 244 245 220; 2929 220 245 246 221; 2930 221 246 247 222; 222 247 248 223; 2932 223 248 249 224; 2933 224 249 250 225; 226 251 252 227; 2935 227 252 253 228; 2936 228 253 254 229; 229 254 255 230; 2938 230 255 256 231; 2939 231 256 257 232; 232 257 258 233; 2941 233 258 259 234; 2942 234 259 260 235; 235 260 261 236; 2944 236 261 262 237; 2945 237 262 263 238; 238 263 264 239; 2947 239 264 265 240; 2948 240 265 266 241; 241 266 267 242; 2950 242 267 268 243; 2951 243 268 269 244; 244 269 270 245; 2953 245 270 271 246; 2954 246 271 272 247; 247 272 273 248; 2956 248 273 274 249; 2957 249 274 275 250; 251 276 277 252; 2959 252 277 278 253; 2960 253 278 279 254; 254 279 280 255; 2962 255 280 281 256; 2963 256 281 282 257; 257 282 283 258; 2965 258 283 284 259; 2966 259 284 285 260; 260 285 286 261; 2968 261 286 287 262; 2969 262 287 288 263; 263 288 289 264; 2971 264 289 290 265; 2972 265 290 291 266; 266 291 292 267; 2974 267 292 293 268; 2975 268 293 294 269; 269 294 295 270; 2977 270 295 296 271; 2978 271 296 297 272; 272 297 298 273; 2980 273 298 299 274; 2981 274 299 300 275; 276 301 302 277; 2983 277 302 303 278; 2984 278 303 304 279; 279 304 305 280; 2986 280 305 306 281; 2987 281 306 307 282; 282 307 308 283; 2989 283 308 309 284; 2990 284 309 310 285; 285 310 311 286; 2992 286 311 312 287; 2993 287 312 313 288; 288 313 314 289; 2995 289 314 315 290; 2996 290 315 316 291; 291 316 317 292; 2998 292 317 318 293; 2999 293 318 319 294; 294 319 320 295; 3001 295 320 321 296; 3002 296 321 322 297; 297 322 323 298; 3004 298 323 324 299; 3005 299 324 325 300; Page: 11 81; 85; 89; 93; 97; C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 3006 3009 3012 3015 3018 3021 3024 3027 3030 3033 3036 3039 3042 3045 3048 3051 3054 3057 3060 3063 3066 3069 3072 3075 3078 3081 3084 3087 3090 3093 3096 3099 3102 3105 3108 3111 3114 3117 3120 3123 3126 3129 3132 3135 3138 3141 3144 3147 3150 3153 3156 3159 3163 3167 3171 3175 3179 3182 3185 3188 3191 3194 3197 3200 3203 3206 3209 3212 3215 3218 3221 3224 3227 3230 3233 3236 3239 3242 3245 3248 3251 3254 3257 3260 301 326 327 302; 3007 302 327 328 303; 3008 303 328 329 304; 304 329 330 305; 3010 305 330 331 306; 3011 306 331 332 307; 307 332 333 308; 3013 308 333 334 309; 3014 309 334 335 310; 310 335 336 311; 3016 311 336 337 312; 3017 312 337 338 313; 313 338 339 314; 3019 314 339 340 315; 3020 315 340 341 316; 316 341 342 317; 3022 317 342 343 318; 3023 318 343 344 319; 319 344 345 320; 3025 320 345 346 321; 3026 321 346 347 322; 322 347 348 323; 3028 323 348 349 324; 3029 324 349 350 325; 326 351 352 327; 3031 327 352 353 328; 3032 328 353 354 329; 329 354 355 330; 3034 330 355 356 331; 3035 331 356 357 332; 332 357 358 333; 3037 333 358 359 334; 3038 334 359 360 335; 335 360 361 336; 3040 336 361 362 337; 3041 337 362 363 338; 338 363 364 339; 3043 339 364 365 340; 3044 340 365 366 341; 341 366 367 342; 3046 342 367 368 343; 3047 343 368 369 344; 344 369 370 345; 3049 345 370 371 346; 3050 346 371 372 347; 347 372 373 348; 3052 348 373 374 349; 3053 349 374 375 350; 351 376 377 352; 3055 352 377 378 353; 3056 353 378 379 354; 354 379 380 355; 3058 355 380 381 356; 3059 356 381 382 357; 357 382 383 358; 3061 358 383 384 359; 3062 359 384 385 360; 360 385 386 361; 3064 361 386 387 362; 3065 362 387 388 363; 363 388 389 364; 3067 364 389 390 365; 3068 365 390 391 366; 366 391 392 367; 3070 367 392 393 368; 3071 368 393 394 369; 369 394 395 370; 3073 370 395 396 371; 3074 371 396 397 372; 372 397 398 373; 3076 373 398 399 374; 3077 374 399 400 375; 376 401 402 377; 3079 377 402 403 378; 3080 378 403 404 379; 379 404 405 380; 3082 380 405 406 381; 3083 381 406 407 382; 382 407 408 383; 3085 383 408 409 384; 3086 384 409 410 385; 385 410 411 386; 3088 386 411 412 387; 3089 387 412 413 388; 388 413 414 389; 3091 389 414 415 390; 3092 390 415 416 391; 391 416 417 392; 3094 392 417 418 393; 3095 393 418 419 394; 394 419 420 395; 3097 395 420 421 396; 3098 396 421 422 397; 397 422 423 398; 3100 398 423 424 399; 3101 399 424 425 400; 712 716 1282 1281; 3103 1281 1282 1299 1298; 3104 716 720 1283 1282; 1282 1283 1300 1299; 3106 720 724 1284 1283; 3107 1283 1284 1301 1300; 724 728 1285 1284; 3109 1284 1285 1302 1301; 3110 728 732 1286 1285; 1285 1286 1303 1302; 3112 732 736 1287 1286; 3113 1286 1287 1304 1303; 736 740 1288 1287; 3115 1287 1288 1305 1304; 3116 740 765 1289 1288; 1288 1289 1306 1305; 3118 765 769 1290 1289; 3119 1289 1290 1307 1306; 769 773 1291 1290; 3121 1290 1291 1308 1307; 3122 773 777 1292 1291; 1291 1292 1309 1308; 3124 777 781 1293 1292; 3125 1292 1293 1310 1309; 781 785 1294 1293; 3127 1293 1294 1311 1310; 3128 785 789 1295 1294; 1294 1295 1312 1311; 3130 789 793 1296 1295; 3131 1295 1296 1313 1312; 793 818 1297 1296; 3133 1296 1297 1314 1313; 3134 1194 1195 1202 1201; 1201 1202 1209 1208; 3136 1208 1209 1216 1215; 3137 1215 1216 733 729; 1195 1196 1203 1202; 3139 1202 1203 1210 1209; 3140 1209 1210 1217 1216; 1216 1217 737 733; 3142 1196 1197 1204 1203; 3143 1203 1204 1211 1210; 1210 1211 1218 1217; 3145 1217 1218 741 737; 3146 1197 1198 1205 1204; 1204 1205 1212 1211; 3148 1211 1212 1219 1218; 3149 1218 1219 766 741; 1198 1199 1206 1205; 3151 1205 1206 1213 1212; 3152 1212 1213 1220 1219; 1219 1220 770 766; 3154 1199 1200 1207 1206; 3155 1206 1207 1214 1213; 1213 1214 1221 1220; 3157 1220 1221 774 770; 3158 1 2 427 426; 2 3 428 427; 3160 3 4 429 428; 3161 4 5 430 429; 3162 5 6 431 430; 6 7 432 431; 3164 7 8 433 432; 3165 8 9 434 433; 3166 9 10 435 434; 10 11 436 435; 3168 11 12 437 436; 3169 12 13 438 437; 3170 13 14 439 438; 14 15 440 439; 3172 15 16 441 440; 3173 16 17 442 441; 3174 17 18 443 442; 18 19 444 443; 3176 19 20 445 444; 3177 20 21 446 445; 3178 21 22 447 446; 22 23 448 447; 3180 23 24 449 448; 3181 24 25 450 449; 426 427 558 557; 3183 427 428 559 558; 3184 428 429 560 559; 429 430 561 560; 3186 430 431 562 561; 3187 431 432 563 562; 432 433 564 563; 3189 433 434 565 564; 3190 434 435 566 565; 435 436 567 566; 3192 436 437 568 567; 3193 437 438 569 568; 438 439 570 569; 3195 439 440 571 570; 3196 440 441 572 571; 441 442 573 572; 3198 442 443 574 573; 3199 443 444 575 574; 444 445 576 575; 3201 445 446 577 576; 3202 446 447 578 577; 447 448 579 578; 3204 448 449 580 579; 3205 449 450 581 580; 557 558 689 688; 3207 558 559 690 689; 3208 559 560 691 690; 560 561 692 691; 3210 561 562 693 692; 3211 562 563 694 693; 563 564 695 694; 3213 564 565 696 695; 3214 565 566 697 696; 566 567 698 697; 3216 567 568 699 698; 3217 568 569 700 699; 569 570 701 700; 3219 570 571 702 701; 3220 571 572 703 702; 572 573 704 703; 3222 573 574 705 704; 3223 574 575 706 705; 575 576 707 706; 3225 576 577 708 707; 3226 577 578 709 708; 578 579 710 709; 3228 579 580 711 710; 3229 580 581 712 711; 688 689 820 819; 3231 689 690 821 820; 3232 690 691 822 821; 691 692 823 822; 3234 692 693 824 823; 3235 693 694 825 824; 694 695 826 825; 3237 695 696 827 826; 3238 696 697 828 827; 697 698 829 828; 3240 698 699 830 829; 3241 699 700 831 830; 700 701 832 831; 3243 701 702 833 832; 3244 702 703 834 833; 703 704 835 834; 3246 704 705 836 835; 3247 705 706 837 836; 706 707 838 837; 3249 707 708 839 838; 3250 708 709 840 839; 709 710 841 840; 3252 710 711 842 841; 3253 711 712 843 842; 819 820 945 944; 3255 820 821 946 945; 3256 821 822 947 946; 822 823 948 947; 3258 823 824 949 948; 3259 824 825 950 949; 825 826 951 950; 3261 826 827 952 951; 3262 827 828 953 952; Page: 12 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 3263 3266 3269 3272 3275 3278 3281 3284 3287 3290 3293 3296 3299 3302 3305 3308 3311 3314 3317 3320 3323 3326 3329 3332 3335 3338 3341 3344 3347 3350 3353 3356 3359 3362 3365 3368 3371 3374 3377 3380 3383 3386 3389 3392 3395 3398 3401 3404 3407 3410 3413 3416 3419 3422 3425 3428 3431 3434 3437 3440 3443 3446 3449 3452 3455 3458 3461 3464 3467 3470 3473 3476 3479 3482 3485 3488 3491 3494 3497 3500 3503 3506 3509 3512 828 829 954 953; 3264 829 830 955 954; 3265 830 831 831 832 957 956; 3267 832 833 958 957; 3268 833 834 834 835 960 959; 3270 835 836 961 960; 3271 836 837 837 838 963 962; 3273 838 839 964 963; 3274 839 840 840 841 966 965; 3276 841 842 967 966; 3277 842 843 944 945 1070 1069; 3279 945 946 1071 1070; 3280 946 947 948 1073 1072; 3282 948 949 1074 1073; 3283 949 950 951 1076 1075; 3285 951 952 1077 1076; 3286 952 953 954 1079 1078; 3288 954 955 1080 1079; 3289 955 956 957 1082 1081; 3291 957 958 1083 1082; 3292 958 959 960 1085 1084; 3294 960 961 1086 1085; 3295 961 962 963 1088 1087; 3297 963 964 1089 1088; 3298 964 965 966 1091 1090; 3300 966 967 1092 1091; 3301 967 201 202 480 479; 3303 202 203 481 480; 3304 203 204 204 205 483 482; 3306 205 206 484 483; 3307 206 207 207 208 486 485; 3309 208 209 487 486; 3310 209 210 210 211 489 488; 3312 211 212 490 489; 3313 212 213 213 214 492 491; 3315 214 215 493 492; 3316 215 216 216 217 495 494; 3318 217 218 496 495; 3319 218 219 219 220 498 497; 3321 220 221 499 498; 3322 221 222 222 223 501 500; 3324 223 224 502 501; 3325 224 225 479 480 611 610; 3327 480 481 612 611; 3328 481 482 482 483 614 613; 3330 483 484 615 614; 3331 484 485 485 486 617 616; 3333 486 487 618 617; 3334 487 488 488 489 620 619; 3336 489 490 621 620; 3337 490 491 491 492 623 622; 3339 492 493 624 623; 3340 493 494 494 495 626 625; 3342 495 496 627 626; 3343 496 497 497 498 629 628; 3345 498 499 630 629; 3346 499 500 500 501 632 631; 3348 501 502 633 632; 3349 502 503 610 611 742 741; 3351 611 612 743 742; 3352 612 613 613 614 745 744; 3354 614 615 746 745; 3355 615 616 616 617 748 747; 3357 617 618 749 748; 3358 618 619 619 620 751 750; 3360 620 621 752 751; 3361 621 622 622 623 754 753; 3363 623 624 755 754; 3364 624 625 625 626 757 756; 3366 626 627 758 757; 3367 627 628 628 629 760 759; 3369 629 630 761 760; 3370 630 631 631 632 763 762; 3372 632 633 764 763; 3373 633 634 741 742 870 869; 3375 742 743 871 870; 3376 743 744 744 745 873 872; 3378 745 746 874 873; 3379 746 747 747 748 876 875; 3381 748 749 877 876; 3382 749 750 750 751 879 878; 3384 751 752 880 879; 3385 752 753 753 754 882 881; 3387 754 755 883 882; 3388 755 756 756 757 885 884; 3390 757 758 886 885; 3391 758 759 759 760 888 887; 3393 760 761 889 888; 3394 761 762 762 763 891 890; 3396 763 764 892 891; 3397 764 765 869 870 995 994; 3399 870 871 996 995; 3400 871 872 872 873 998 997; 3402 873 874 999 998; 3403 874 875 875 876 1001 1000; 3405 876 877 1002 1001; 3406 877 878 879 1004 1003; 3408 879 880 1005 1004; 3409 880 881 882 1007 1006; 3411 882 883 1008 1007; 3412 883 884 885 1010 1009; 3414 885 886 1011 1010; 3415 886 887 888 1013 1012; 3417 888 889 1014 1013; 3418 889 890 891 1016 1015; 3420 891 892 1017 1016; 3421 892 994 995 1120 1119; 3423 995 996 1121 1120; 3424 996 997 998 1123 1122; 3426 998 999 1124 1123; 3427 999 1000 1001 1126 1125; 3429 1001 1002 1127 1126; 3430 1003 1004 1129 1128; 3432 1004 1005 1130 1129; 3433 1006 1007 1132 1131; 3435 1007 1008 1133 1132; 3436 1009 1010 1135 1134; 3438 1010 1011 1136 1135; 3439 1012 1013 1138 1137; 3441 1013 1014 1139 1138; 3442 1015 1016 1141 1140; 3444 1016 1017 1142 1141; 3445 401 402 533 532; 3447 402 403 534 533; 3448 403 404 404 405 536 535; 3450 405 406 537 536; 3451 406 407 407 408 539 538; 3453 408 409 540 539; 3454 409 410 410 411 542 541; 3456 411 412 543 542; 3457 412 413 413 414 545 544; 3459 414 415 546 545; 3460 415 416 416 417 548 547; 3462 417 418 549 548; 3463 418 419 419 420 551 550; 3465 420 421 552 551; 3466 421 422 422 423 554 553; 3468 423 424 555 554; 3469 424 425 532 533 664 663; 3471 533 534 665 664; 3472 534 535 535 536 667 666; 3474 536 537 668 667; 3475 537 538 538 539 670 669; 3477 539 540 671 670; 3478 540 541 541 542 673 672; 3480 542 543 674 673; 3481 543 544 544 545 676 675; 3483 545 546 677 676; 3484 546 547 547 548 679 678; 3486 548 549 680 679; 3487 549 550 550 551 682 681; 3489 551 552 683 682; 3490 552 553 553 554 685 684; 3492 554 555 686 685; 3493 555 556 663 664 795 794; 3495 664 665 796 795; 3496 665 666 666 667 798 797; 3498 667 668 799 798; 3499 668 669 669 670 801 800; 3501 670 671 802 801; 3502 671 672 672 673 804 803; 3504 673 674 805 804; 3505 674 675 675 676 807 806; 3507 676 677 808 807; 3508 677 678 678 679 810 809; 3510 679 680 811 810; 3511 680 681 681 682 813 812; 3513 682 683 814 813; 3514 683 684 Page: 13 956 955; 959 958; 962 961; 965 964; 968 967; 947 1072 1071; 950 1075 1074; 953 1078 1077; 956 1081 1080; 959 1084 1083; 962 1087 1086; 965 1090 1089; 968 1093 1092; 482 481; 485 484; 488 487; 491 490; 494 493; 497 496; 500 499; 503 502; 613 612; 616 615; 619 618; 622 621; 625 624; 628 627; 631 630; 634 633; 744 743; 747 746; 750 749; 753 752; 756 755; 759 758; 762 761; 765 764; 872 871; 875 874; 878 877; 881 880; 884 883; 887 886; 890 889; 893 892; 997 996; 1000 999; 878 1003 1002; 881 1006 1005; 884 1009 1008; 887 1012 1011; 890 1015 1014; 893 1018 1017; 997 1122 1121; 1000 1125 1124; 1002 1003 1128 1127; 1005 1006 1131 1130; 1008 1009 1134 1133; 1011 1012 1137 1136; 1014 1015 1140 1139; 1017 1018 1143 1142; 535 534; 538 537; 541 540; 544 543; 547 546; 550 549; 553 552; 556 555; 666 665; 669 668; 672 671; 675 674; 678 677; 681 680; 684 683; 687 686; 797 796; 800 799; 803 802; 806 805; 809 808; 812 811; 815 814; C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 3515 3518 3521 3524 3527 3530 3533 3536 3539 3542 3545 3548 3551 3554 3557 3560 3563 3566 3569 3572 3575 3578 3581 3584 3587 3590 3593 3596 3599 3602 3605 3608 3611 3614 3617 3620 3624 3627 3630 3633 3636 3639 3642 3645 3648 3651 3654 3657 3660 3663 3666 3669 3672 3675 3678 3681 3684 3687 3690 3693 3696 3699 3702 3705 3708 3711 3714 3717 3720 3723 3726 3729 3732 3735 3738 3741 3744 3747 3750 3753 3756 3759 3762 3765 684 685 816 815; 3516 685 686 817 816; 3517 686 687 818 817; 794 795 920 919; 3519 795 796 921 920; 3520 796 797 922 921; 797 798 923 922; 3522 798 799 924 923; 3523 799 800 925 924; 800 801 926 925; 3525 801 802 927 926; 3526 802 803 928 927; 803 804 929 928; 3528 804 805 930 929; 3529 805 806 931 930; 806 807 932 931; 3531 807 808 933 932; 3532 808 809 934 933; 809 810 935 934; 3534 810 811 936 935; 3535 811 812 937 936; 812 813 938 937; 3537 813 814 939 938; 3538 814 815 940 939; 815 816 941 940; 3540 816 817 942 941; 3541 817 818 943 942; 919 920 1045 1044; 3543 920 921 1046 1045; 3544 921 922 1047 1046; 922 923 1048 1047; 3546 923 924 1049 1048; 3547 924 925 1050 1049; 925 926 1051 1050; 3549 926 927 1052 1051; 3550 927 928 1053 1052; 928 929 1054 1053; 3552 929 930 1055 1054; 3553 930 931 1056 1055; 931 932 1057 1056; 3555 932 933 1058 1057; 3556 933 934 1059 1058; 934 935 1060 1059; 3558 935 936 1061 1060; 3559 936 937 1062 1061; 937 938 1063 1062; 3561 938 939 1064 1063; 3562 939 940 1065 1064; 940 941 1066 1065; 3564 941 942 1067 1066; 3565 942 943 1068 1067; 1044 1045 1170 1169; 3567 1045 1046 1171 1170; 3568 1046 1047 1172 1171; 1047 1048 1173 1172; 3570 1048 1049 1174 1173; 3571 1049 1050 1175 1174; 1050 1051 1176 1175; 3573 1051 1052 1177 1176; 3574 1052 1053 1178 1177; 1053 1054 1179 1178; 3576 1054 1055 1180 1179; 3577 1055 1056 1181 1180; 1056 1057 1182 1181; 3579 1057 1058 1183 1182; 3580 1058 1059 1184 1183; 1059 1060 1185 1184; 3582 1060 1061 1186 1185; 3583 1061 1062 1187 1186; 1062 1063 1188 1187; 3585 1063 1064 1189 1188; 3586 1064 1065 1190 1189; 1065 1066 1191 1190; 3588 1066 1067 1192 1191; 3589 1067 1068 1193 1192; 1194 1201 1229 1222; 3591 1201 1208 1231 1229; 3592 1208 1215 1238 1231; 1215 729 860 1238; 3594 1222 1229 1248 1241; 3595 1229 1231 1250 1248; 1231 1238 1257 1250; 3597 1238 860 985 1257; 3598 1241 1248 1274 1260; 1248 1250 1267 1274; 3600 1250 1257 1275 1267; 3601 1257 985 1110 1275; 1211 1218 1239 1234; 3603 1218 741 869 1239; 3604 1234 1239 1258 1253; 1239 869 994 1258; 3606 1253 1258 1276 1270; 3607 1258 994 1119 1276; 1200 1207 1230 1228; 3609 1207 1214 1237 1230; 3610 1214 1221 1240 1237; 1221 774 899 1240; 3612 1228 1230 1249 1247; 3613 1230 1237 1256 1249; 1237 1240 1259 1256; 3615 1240 899 1024 1259; 3616 1247 1249 1277 1266; 1249 1256 1273 1277; 3618 1256 1259 1278 1273; 3619 1259 1024 1149 1278; 1 26 451 426; 3621 26 51 455 451; 3622 51 76 459 455; 3623 76 101 463 459; 101 126 467 463; 3625 126 151 471 467; 3626 151 176 475 471; 176 201 479 475; 3628 201 226 504 479; 3629 226 251 508 504; 251 276 512 508; 3631 276 301 516 512; 3632 301 326 520 516; 326 351 524 520; 3634 351 376 528 524; 3635 376 401 532 528; 426 451 582 557; 3637 451 455 586 582; 3638 455 459 590 586; 459 463 594 590; 3640 463 467 598 594; 3641 467 471 602 598; 471 475 606 602; 3643 475 479 610 606; 3644 479 504 635 610; 504 508 639 635; 3646 508 512 643 639; 3647 512 516 647 643; 516 520 651 647; 3649 520 524 655 651; 3650 524 528 659 655; 528 532 663 659; 3652 557 582 713 688; 3653 582 586 717 713; 586 590 721 717; 3655 590 594 725 721; 3656 594 598 729 725; 598 602 733 729; 3658 602 606 737 733; 3659 606 610 741 737; 610 635 766 741; 3661 635 639 770 766; 3662 639 643 774 770; 643 647 778 774; 3664 647 651 782 778; 3665 651 655 786 782; 655 659 790 786; 3667 659 663 794 790; 3668 688 713 844 819; 713 717 848 844; 3670 717 721 852 848; 3671 721 725 856 852; 725 729 860 856; 3673 774 778 903 899; 3674 778 782 907 903; 782 786 911 907; 3676 786 790 915 911; 3677 790 794 919 915; 819 844 969 944; 3679 844 848 973 969; 3680 848 852 977 973; 852 856 981 977; 3682 856 860 985 981; 3683 899 903 1028 1024; 903 907 1032 1028; 3685 907 911 1036 1032; 3686 911 915 1040 1036; 915 919 1044 1040; 3688 944 969 1094 1069; 3689 969 973 1098 1094; 973 977 1102 1098; 3691 977 981 1106 1102; 3692 981 985 1110 1106; 1024 1028 1153 1149; 3694 1028 1032 1157 1153; 3695 1032 1036 1161 1157; 1036 1040 1165 1161; 3697 1040 1044 1169 1165; 3698 9 34 452 434; 34 59 456 452; 3700 59 84 460 456; 3701 84 109 464 460; 109 134 468 464; 3703 134 159 472 468; 3704 159 184 476 472; 184 209 487 476; 3706 209 234 505 487; 3707 234 259 509 505; 259 284 513 509; 3709 284 309 517 513; 3710 309 334 521 517; 334 359 525 521; 3712 359 384 529 525; 3713 384 409 540 529; 434 452 583 565; 3715 452 456 587 583; 3716 456 460 591 587; 460 464 595 591; 3718 464 468 599 595; 3719 468 472 603 599; 472 476 607 603; 3721 476 487 618 607; 3722 487 505 636 618; 505 509 640 636; 3724 509 513 644 640; 3725 513 517 648 644; 517 521 652 648; 3727 521 525 656 652; 3728 525 529 660 656; 529 540 671 660; 3730 565 583 714 696; 3731 583 587 718 714; 587 591 722 718; 3733 591 595 726 722; 3734 595 599 730 726; 599 603 734 730; 3736 603 607 738 734; 3737 607 618 749 738; 618 636 767 749; 3739 636 640 771 767; 3740 640 644 775 771; 644 648 779 775; 3742 648 652 783 779; 3743 652 656 787 783; 656 660 791 787; 3745 660 671 802 791; 3746 696 714 845 827; 714 718 849 845; 3748 718 722 853 849; 3749 722 726 857 853; 726 730 861 857; 3751 730 734 864 861; 3752 734 738 867 864; 738 749 877 867; 3754 749 767 894 877; 3755 767 771 896 894; 771 775 900 896; 3757 775 779 904 900; 3758 779 783 908 904; 783 787 912 908; 3760 787 791 916 912; 3761 791 802 927 916; 827 845 970 952; 3763 845 849 974 970; 3764 849 853 978 974; 853 857 982 978; 3766 857 861 986 982; 3767 861 864 989 986; Page: 14 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 3768 3771 3774 3777 3780 3783 3786 3789 3792 3795 3798 3801 3804 3807 3810 3813 3816 3819 3822 3825 3828 3831 3834 3837 3840 3843 3846 3849 3852 3855 3858 3861 3864 3867 3870 3873 3876 3879 3882 3885 3888 3891 3894 3897 3900 3903 3906 3909 3912 3915 3918 3921 3924 3927 3930 3933 3936 3939 3942 3945 3948 3951 3954 3957 3960 3963 3966 3969 3972 3975 3978 3981 3984 3987 3990 3993 3996 3999 4002 4005 4008 4011 4014 4017 864 867 992 989; 3769 867 877 1002 992; 3770 877 894 1019 1002; 894 896 1021 1019; 3772 896 900 1025 1021; 3773 900 904 1029 1025; 904 908 1033 1029; 3775 908 912 1037 1033; 3776 912 916 1041 1037; 916 927 1052 1041; 3778 952 970 1095 1077; 3779 970 974 1099 1095; 974 978 1103 1099; 3781 978 982 1107 1103; 3782 982 986 1111 1107; 986 989 1114 1111; 3784 989 992 1117 1114; 3785 992 1002 1127 1117; 1002 1019 1144 1127; 3787 1019 1021 1146 1144; 3788 1021 1025 1150 1146; 1025 1029 1154 1150; 3790 1029 1033 1158 1154; 3791 1033 1037 1162 1158; 1037 1041 1166 1162; 3793 1041 1052 1177 1166; 3794 17 42 453 442; 42 67 457 453; 3796 67 92 461 457; 3797 92 117 465 461; 117 142 469 465; 3799 142 167 473 469; 3800 167 192 477 473; 192 217 495 477; 3802 217 242 506 495; 3803 242 267 510 506; 267 292 514 510; 3805 292 317 518 514; 3806 317 342 522 518; 342 367 526 522; 3808 367 392 530 526; 3809 392 417 548 530; 442 453 584 573; 3811 453 457 588 584; 3812 457 461 592 588; 461 465 596 592; 3814 465 469 600 596; 3815 469 473 604 600; 473 477 608 604; 3817 477 495 626 608; 3818 495 506 637 626; 506 510 641 637; 3820 510 514 645 641; 3821 514 518 649 645; 518 522 653 649; 3823 522 526 657 653; 3824 526 530 661 657; 530 548 679 661; 3826 573 584 715 704; 3827 584 588 719 715; 588 592 723 719; 3829 592 596 727 723; 3830 596 600 731 727; 600 604 735 731; 3832 604 608 739 735; 3833 608 626 757 739; 626 637 768 757; 3835 637 641 772 768; 3836 641 645 776 772; 645 649 780 776; 3838 649 653 784 780; 3839 653 657 788 784; 657 661 792 788; 3841 661 679 810 792; 3842 704 715 846 835; 715 719 850 846; 3844 719 723 854 850; 3845 723 727 858 854; 727 731 862 858; 3847 731 735 865 862; 3848 735 739 868 865; 739 757 885 868; 3850 757 768 895 885; 3851 768 772 897 895; 772 776 901 897; 3853 776 780 905 901; 3854 780 784 909 905; 784 788 913 909; 3856 788 792 917 913; 3857 792 810 935 917; 835 846 971 960; 3859 846 850 975 971; 3860 850 854 979 975; 854 858 983 979; 3862 858 862 987 983; 3863 862 865 990 987; 865 868 993 990; 3865 868 885 1010 993; 3866 885 895 1020 1010; 895 897 1022 1020; 3868 897 901 1026 1022; 3869 901 905 1030 1026; 905 909 1034 1030; 3871 909 913 1038 1034; 3872 913 917 1042 1038; 917 935 1060 1042; 3874 960 971 1096 1085; 3875 971 975 1100 1096; 975 979 1104 1100; 3877 979 983 1108 1104; 3878 983 987 1112 1108; 987 990 1115 1112; 3880 990 993 1118 1115; 3881 993 1010 1135 1118; 1010 1020 1145 1135; 3883 1020 1022 1147 1145; 3884 1022 1026 1151 1147; 1026 1030 1155 1151; 3886 1030 1034 1159 1155; 3887 1034 1038 1163 1159; 1038 1042 1167 1163; 3889 1042 1060 1185 1167; 3890 25 50 454 450; 50 75 458 454; 3892 75 100 462 458; 3893 100 125 466 462; 125 150 470 466; 3895 150 175 474 470; 3896 175 200 478 474; 200 225 503 478; 3898 225 250 507 503; 3899 250 275 511 507; 275 300 515 511; 3901 300 325 519 515; 3902 325 350 523 519; 350 375 527 523; 3904 375 400 531 527; 3905 400 425 556 531; 450 454 585 581; 3907 454 458 589 585; 3908 458 462 593 589; 462 466 597 593; 3910 466 470 601 597; 3911 470 474 605 601; 474 478 609 605; 3913 478 503 634 609; 3914 503 507 638 634; 507 511 642 638; 3916 511 515 646 642; 3917 515 519 650 646; 519 523 654 650; 3919 523 527 658 654; 3920 527 531 662 658; 531 556 687 662; 3922 581 585 716 712; 3923 585 589 720 716; 589 593 724 720; 3925 593 597 728 724; 3926 597 601 732 728; 601 605 736 732; 3928 605 609 740 736; 3929 609 634 765 740; 634 638 769 765; 3931 638 642 773 769; 3932 642 646 777 773; 646 650 781 777; 3934 650 654 785 781; 3935 654 658 789 785; 658 662 793 789; 3937 662 687 818 793; 3938 712 716 847 843; 716 720 851 847; 3940 720 724 855 851; 3941 724 728 859 855; 728 732 863 859; 3943 732 736 866 863; 3944 773 777 902 898; 777 781 906 902; 3946 781 785 910 906; 3947 785 789 914 910; 789 793 918 914; 3949 793 818 943 918; 3950 843 847 972 968; 847 851 976 972; 3952 851 855 980 976; 3953 855 859 984 980; 859 863 988 984; 3955 863 866 991 988; 3956 898 902 1027 1023; 902 906 1031 1027; 3958 906 910 1035 1031; 3959 910 914 1039 1035; 914 918 1043 1039; 3961 918 943 1068 1043; 3962 968 972 1097 1093; 972 976 1101 1097; 3964 976 980 1105 1101; 3965 980 984 1109 1105; 984 988 1113 1109; 3967 988 991 1116 1113; 3968 1023 1027 1152 1148; 1027 1031 1156 1152; 3970 1031 1035 1160 1156; 3971 1035 1039 1164 1160; 1039 1043 1168 1164; 3973 1043 1068 1193 1168; 3974 1194 1195 1223 1222; 1195 1196 1224 1223; 3976 1196 1197 1225 1224; 3977 1197 1198 1226 1225; 1198 1199 1227 1226; 3979 1199 1200 1228 1227; 3980 1222 1223 1242 1241; 1223 1224 1243 1242; 3982 1224 1225 1244 1243; 3983 1225 1226 1245 1244; 1226 1227 1246 1245; 3985 1227 1228 1247 1246; 3986 1241 1242 1261 1260; 1242 1243 1262 1261; 3988 1243 1244 1263 1262; 3989 1244 1245 1264 1263; 1245 1246 1265 1264; 3991 1246 1247 1266 1265; 3992 1208 1209 1232 1231; 1209 1210 1233 1232; 3994 1210 1211 1234 1233; 3995 1211 1212 1235 1234; 1212 1213 1236 1235; 3997 1213 1214 1237 1236; 3998 1231 1232 1251 1250; 1232 1233 1252 1251; 4000 1233 1234 1253 1252; 4001 1234 1235 1254 1253; 1235 1236 1255 1254; 4003 1236 1237 1256 1255; 4004 1250 1251 1268 1267; 1252 1253 1270 1269; 4006 1253 1254 1271 1270; 4007 1255 1256 1273 1272; 1298 1299 1316 1315; 4009 1299 1300 1317 1316; 4010 1300 1301 1318 1317; 1301 1302 1319 1318; 4012 1302 1303 1320 1319; 4013 1303 1304 1321 1320; 1304 1305 1322 1321; 4015 1305 1306 1323 1322; 4016 1306 1307 1324 1323; 1307 1308 1325 1324; 4018 1308 1309 1326 1325; 4019 1309 1310 1327 1326; Page: 15 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 4020 1310 1311 1328 1327; 4021 1311 1312 1329 1328; 4022 1312 1313 1330 1329; 4023 1313 1314 1331 1330; 4024 1315 1316 1333 1332; 4025 1316 1317 1334 1333; 4026 1317 1318 1335 1334; 4027 1318 1319 1336 1335; 4028 1319 1320 1337 1336; 4029 1320 1321 1338 1337; 4030 1321 1322 1339 1338; 4031 1322 1323 1340 1339; 4032 1323 1324 1341 1340; 4033 1324 1325 1342 1341; 4034 1325 1326 1343 1342; 4035 1326 1327 1344 1343; 4036 1327 1328 1345 1344; 4037 1328 1329 1346 1345; 4038 1329 1330 1347 1346; 4039 1330 1331 1348 1347; 4040 1332 1333 1350 1349; 4041 1333 1334 1351 1350; 4042 1334 1335 1352 1351; 4043 1335 1336 1353 1352; 4044 1336 1337 1354 1353; 4045 1337 1338 1355 1354; 4046 1338 1339 1356 1355; 4047 1339 1340 1357 1356; 4048 1340 1341 1358 1357; 4049 1341 1342 1359 1358; 4050 1342 1343 1360 1359; 4051 1343 1344 1361 1360; 4052 1344 1345 1362 1361; 4053 1345 1346 1363 1362; 4054 1346 1347 1364 1363; 4055 1347 1348 1365 1364; DEFINE MATERIAL START ISOTROPIC MIEMBROS E 1 *E 221467 POISSON 0.17 ALPHA 5.5e-006 DAMP 0.05 ISOTROPIC COLUMNAS E 221467 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5e-006 DAMP 0.05 ISOTROPIC TRABES E 110733 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5e-006 DAMP 0.05 ISOTROPIC PLACAS *E 1 E 221467 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5e-006 DAMP 0.05 END DEFINE MATERIAL CONSTANTS MATERIAL MIEMBROS MEMB 1 TO 2478 2483 TO 2524 2529 TO 2651 2655 TO 2675 2679 2680 TO 2699 MATERIAL COLUMNAS MEMB 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 2717 MATERIAL TRABES MEMB 2703 TO 2714 MATERIAL PLACAS MEMB 2718 TO 4055 MEMBER PROPERTY AMERICAN 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 2716 2717 PRIS YD 30 ZD 30 2703 TO 2714 PRIS YD 20 ZD 120 UNIT METER KG MEMBER PROPERTY AMERICAN 2363 TO 2414 2538 TO 2569 2618 TO 2651 PRIS YD 0.2 ZD 1 2415 TO 2478 2570 TO 2617 PRIS YD 1 ZD 0.2 2483 TO 2491 2510 TO 2512 2529 TO 2537 PRIS YD 1 ZD 0.2 2492 TO 2509 2513 TO 2524 2655 TO 2675 2679 TO 2699 PRIS YD 0.2 ZD 1 1 TO 808 PRIS YD 0.3 ZD 1 809 TO 1594 PRIS YD 1 ZD 0.3 1595 TO 1744 1904 TO 2053 2213 TO 2362 PRIS YD 1 ZD 0.3 1745 TO 1903 2054 TO 2212 PRIS YD 0.3 ZD 1 UNIT CM KG ELEMENT PROPERTY 3102 TO 3157 3590 TO 3619 3974 TO 4055 THICKNESS 20 2718 TO 3101 3158 TO 3589 3620 TO 3973 THICKNESS 30 SUPPORTS 1 TO 425 FIXED BUT MX MY MZ KFX 6000 KFY 6000 KFZ 6000 1279 1280 1372 TO 1374 ELASTIC FOOTING 200 200 DIRECT Y SUBGRADE 0.6 MEMBER RELEASE 2703 2707 2711 START MZ 2706 2710 2714 END MZ UNIT METER KG LOAD 1 GRAVEDAD SELFWEIGHT Y -1 MEMBER LOAD 2703 TO 2714 UNI GY -490 JOINT LOAD 1366 TO 1371 FY -500 MEMBER LOAD 1493 TO 1516 UNI GY -490 LOAD 2 EMPUJE DE AGUA EN CAJA TREN 1 ELEMENT LOAD 3602 3603 3608 3609 3974 TO 3979 3992 TO 3994 TRAP Y 2080 1040 3604 3605 3612 3613 3980 TO 3985 3998 TO 4000 TRAP Y 1040 0 3590 TO 3593 3992 TO 3997 TRAP Y -2080 -1040 Page: 16 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 3594 TO 3597 3998 TO 4003 TRAP Y -1040 0 3134 TO 3147 3150 3151 3154 3155 PR GY -2080 LOAD 3 EMPUJE DE AGUA FLOCULADOR TREN 1 ELEMENT LOAD 3302 TO 3325 3620 TO 3627 3698 TO 3705 3794 TO 3801 TRAP Y 5200 4160 3326 TO 3349 3636 TO 3643 3714 TO 3721 3810 TO 3817 TRAP Y 4160 3120 3350 TO 3373 3652 TO 3659 3730 TO 3737 3826 TO 3833 TRAP Y 3120 2080 3374 TO 3397 3668 TO 3672 3746 TO 3753 3842 TO 3849 TRAP Y 2080 1040 3398 TO 3421 3678 TO 3682 3762 TO 3769 3858 TO 3865 TRAP Y 1040 0 3158 TO 3181 3698 TO 3705 3794 TO 3801 3890 TO 3897 TRAP Y -5200 -4160 3182 TO 3205 3714 TO 3721 3810 TO 3817 3906 TO 3913 TRAP Y -4160 -3120 3206 TO 3229 3730 TO 3737 3826 TO 3833 3922 TO 3929 TRAP Y -3120 -2080 3230 TO 3253 3746 TO 3753 3842 TO 3849 3938 TO 3943 TRAP Y -2080 -1040 3254 TO 3277 3762 TO 3769 3858 TO 3865 3950 TO 3955 TRAP Y -1040 0 2718 TO 2909 PR GY -5200 LOAD 4 EMPUJE DE AGUA CAJA TREN 2 ELEMENT LOAD 3608 TO 3611 3974 TO 3979 3995 TO 3997 TRAP Y 2080 1040 3612 TO 3615 3980 TO 3985 4001 TO 4003 TRAP Y 1040 0 3590 3591 3602 3603 3992 TO 3997 TRAP Y -2080 -1040 3594 3595 3604 3605 3998 TO 4003 TRAP Y -1040 0 3134 3135 3138 3139 3142 3143 3146 TO 3157 PR GY -2080 LOAD 5 EMPUJE DE AGUA FLOCULADOR TREN 2 ELEMENT LOAD 3446 TO 3469 3628 TO 3635 3706 TO 3713 3802 TO 3809 TRAP Y 5200 4160 3470 TO 3493 3644 TO 3651 3722 TO 3729 3818 TO 3825 TRAP Y 4160 3120 3494 TO 3517 3660 TO 3667 3738 TO 3745 3834 TO 3841 TRAP Y 3120 2080 3518 TO 3541 3673 TO 3677 3754 TO 3761 3850 TO 3857 TRAP Y 2080 1040 3542 TO 3565 3683 TO 3687 3770 TO 3777 3866 TO 3873 TRAP Y 1040 0 3302 TO 3325 3706 TO 3713 3802 TO 3809 3898 TO 3905 TRAP Y -5200 -4160 3326 TO 3349 3722 TO 3729 3818 TO 3825 3914 TO 3921 TRAP Y -4160 -3120 3350 TO 3373 3738 TO 3745 3834 TO 3841 3930 TO 3937 TRAP Y -3120 -2080 3374 TO 3397 3754 TO 3761 3850 TO 3857 3944 TO 3949 TRAP Y -2080 -1040 3398 TO 3421 3770 TO 3777 3866 TO 3873 3956 TO 3961 TRAP Y -1040 0 2910 TO 3101 PR GY -5200 LOAD 6 CANAL EFLUENTE ELEMENT LOAD 3938 TO 3949 TRAP Y 2080 1040 3950 TO 3961 TRAP Y 1040 0 4008 TO 4023 TRAP Y -2080 -1040 4024 TO 4039 TRAP Y -1040 0 3102 TO 3133 PR GY -2080 *CARGAS DISEÑO LOAD 7 TREN IZQUIERDO LLENO REPEAT LOAD 1 1.82 2 2.21 3 2.21 6 2.21 LOAD 8 TREN DERECHO LLENO REPEAT LOAD 1 1.82 4 2.21 5 2.21 6 2.21 LOAD 9 TANQUE LLENO REPEAT LOAD 1 1.82 2 2.21 3 2.21 4 2.21 5 2.21 6 2.21 *CARGAS SERVICIO LOAD 10 TREN IZQUIERDO LLENO REPEAT LOAD 1 1.0 2 1.0 3 1.0 6 1.0 LOAD 11 TREN DERECHO LLENO REPEAT LOAD 1 1.0 4 1.0 5 1.0 6 1.0 LOAD 12 TANQUE LLENO REPEAT LOAD 1 1.0 2 1.0 3 1.0 4 1.0 5 1.0 6 1.0 *FINISH PDELTA ANALYSIS LOAD LIST 10 TO 12 PRINT SUPPORT REACTION PRINT JOINT DISPLACEMENTS LOAD LIST 7 TO 9 UNIT KG CM START CONCRETE DESIGN CODE ACI FC 350 ALL FYMAIN 4200 ALL CLB 5 MEMB 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 2717 CLT 5 MEMB 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 2717 DESIGN COLUMN 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 2717 CONCRETE TAKE END CONCRETE DESIGN finish UNIT KG METER PRINT ANALYSIS RESULTS Page: 17 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.std 06/28/10 11:54:38 PAGE LENGTH 99999999999999999999999999999999999999999999 PRINT MEMBER INFORMATION ALL START SCRIPT LANGUAGE OPEN FILE FLOCU.INF WRITE HEADER FORMAT = 'NUDOS' FOR JOINT ALL WRITE COORD JOINT FORMAT = I8, 3F10.3 CLOSE OPEN FILE DEFTRA.MEF WRITE HEADER FORMAT = 'MEMBER' FOR MEMBER ALL WRITE PROP MEMB b d FORMAT = I8,2X, F8.2, 2X, F8.2 CLOSE WRITE HEADER FORMAT = 'LOADS' FOR MEMBER ALL FOR LOAD 10 TO 12 WRITE FORCE MEMB LOAD FX1 FY1 FZ1 MX1 MY1 MZ1 FX2 FY2 FZ2 MX2 MY2 MZ2 FORMAT = I8,2X, I8, 12F13.1 CLOSE END SCRIPT LANGUAGE FINISH Page: 18 Monday, June 28, 2010, 01:13 PM PAGE NO. 1 **************************************************** * * * STAAD.Pro * * Version 2003 Bld 1001.US * * Proprietary Program of * * Research Engineers, Intl. * * Date= JUN 28, 2010 * * Time= 13:12:44 * * * * USER ID: * **************************************************** 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. STAAD SPACE START JOB INFORMATION ENGINEER DATE 23-JUN-10 END JOB INFORMATION INPUT WIDTH 79 UNIT CM KG JOINT COORDINATES 1 0 0 0; 2 100 0 0; 3 200 0 0; 4 300 0 0; 5 400 0 0; 6 500 0 0; 7 600 0 0 8 700 0 0; 9 800 0 0; 10 900 0 0; 11 1000 0 0; 12 1100 0 0; 13 1200 0 0 14 1300 0 0; 15 1400 0 0; 16 1500 0 0; 17 1600 0 0; 18 1700 0 0; 19 1800 0 20 1900 0 0; 21 2000 0 0; 22 2100 0 0; 23 2200 0 0; 24 2300 0 0; 25 2400 0 26 0 0 100; 27 100 0 100; 28 200 0 100; 29 300 0 100; 30 400 0 100 31 500 0 100; 32 600 0 100; 33 700 0 100; 34 800 0 100; 35 900 0 100 36 1000 0 100; 37 1100 0 100; 38 1200 0 100; 39 1300 0 100; 40 1400 0 100 41 1500 0 100; 42 1600 0 100; 43 1700 0 100; 44 1800 0 100; 45 1900 0 100 46 2000 0 100; 47 2100 0 100; 48 2200 0 100; 49 2300 0 100; 50 2400 0 100 51 0 0 200; 52 100 0 200; 53 200 0 200; 54 300 0 200; 55 400 0 200 56 500 0 200; 57 600 0 200; 58 700 0 200; 59 800 0 200; 60 900 0 200 61 1000 0 200; 62 1100 0 200; 63 1200 0 200; 64 1300 0 200; 65 1400 0 200 66 1500 0 200; 67 1600 0 200; 68 1700 0 200; 69 1800 0 200; 70 1900 0 200 71 2000 0 200; 72 2100 0 200; 73 2200 0 200; 74 2300 0 200; 75 2400 0 200 76 0 0 300; 77 100 0 300; 78 200 0 300; 79 300 0 300; 80 400 0 300 81 500 0 300; 82 600 0 300; 83 700 0 300; 84 800 0 300; 85 900 0 300 86 1000 0 300; 87 1100 0 300; 88 1200 0 300; 89 1300 0 300; 90 1400 0 300 91 1500 0 300; 92 1600 0 300; 93 1700 0 300; 94 1800 0 300; 95 1900 0 300 96 2000 0 300; 97 2100 0 300; 98 2200 0 300; 99 2300 0 300; 100 2400 0 300 101 0 0 400; 102 100 0 400; 103 200 0 400; 104 300 0 400; 105 400 0 400 106 500 0 400; 107 600 0 400; 108 700 0 400; 109 800 0 400; 110 900 0 400 111 1000 0 400; 112 1100 0 400; 113 1200 0 400; 114 1300 0 400; 115 1400 0 116 1500 0 400; 117 1600 0 400; 118 1700 0 400; 119 1800 0 400; 120 1900 0 121 2000 0 400; 122 2100 0 400; 123 2200 0 400; 124 2300 0 400; 125 2400 0 126 0 0 500; 127 100 0 500; 128 200 0 500; 129 300 0 500; 130 400 0 500 131 500 0 500; 132 600 0 500; 133 700 0 500; 134 800 0 500; 135 900 0 500 136 1000 0 500; 137 1100 0 500; 138 1200 0 500; 139 1300 0 500; 140 1400 0 141 1500 0 500; 142 1600 0 500; 143 1700 0 500; 144 1800 0 500; 145 1900 0 146 2000 0 500; 147 2100 0 500; 148 2200 0 500; 149 2300 0 500; 150 2400 0 151 0 0 600; 152 100 0 600; 153 200 0 600; 154 300 0 600; 155 400 0 600 156 500 0 600; 157 600 0 600; 158 700 0 600; 159 800 0 600; 160 900 0 600 161 1000 0 600; 162 1100 0 600; 163 1200 0 600; 164 1300 0 600; 165 1400 0 166 1500 0 600; 167 1600 0 600; 168 1700 0 600; 169 1800 0 600; 170 1900 0 171 2000 0 600; 172 2100 0 600; 173 2200 0 600; 174 2300 0 600; 175 2400 0 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 0 0 400 400 400 500 500 500 600 600 600 Page 1 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89. 90. 91. 92. 93. 94. 95. 96. 97. 176 181 186 191 196 201 206 211 216 221 226 231 236 241 246 251 256 261 265 269 273 277 282 286 290 294 298 302 307 311 315 319 323 327 332 336 340 344 348 352 357 361 365 369 373 377 382 386 390 394 398 402 407 411 415 419 -- PAGE NO. 2 0 0 700; 177 100 0 700; 178 200 0 700; 179 300 0 700; 180 400 0 700 500 0 700; 182 600 0 700; 183 700 0 700; 184 800 0 700; 185 900 0 700 1000 0 700; 187 1100 0 700; 188 1200 0 700; 189 1300 0 700; 190 1400 0 700 1500 0 700; 192 1600 0 700; 193 1700 0 700; 194 1800 0 700; 195 1900 0 700 2000 0 700; 197 2100 0 700; 198 2200 0 700; 199 2300 0 700; 200 2400 0 700 0 0 800; 202 100 0 800; 203 200 0 800; 204 300 0 800; 205 400 0 800 500 0 800; 207 600 0 800; 208 700 0 800; 209 800 0 800; 210 900 0 800 1000 0 800; 212 1100 0 800; 213 1200 0 800; 214 1300 0 800; 215 1400 0 800 1500 0 800; 217 1600 0 800; 218 1700 0 800; 219 1800 0 800; 220 1900 0 800 2000 0 800; 222 2100 0 800; 223 2200 0 800; 224 2300 0 800; 225 2400 0 800 0 0 900; 227 100 0 900; 228 200 0 900; 229 300 0 900; 230 400 0 900 500 0 900; 232 600 0 900; 233 700 0 900; 234 800 0 900; 235 900 0 900 1000 0 900; 237 1100 0 900; 238 1200 0 900; 239 1300 0 900; 240 1400 0 900 1500 0 900; 242 1600 0 900; 243 1700 0 900; 244 1800 0 900; 245 1900 0 900 2000 0 900; 247 2100 0 900; 248 2200 0 900; 249 2300 0 900; 250 2400 0 900 0 0 1000; 252 100 0 1000; 253 200 0 1000; 254 300 0 1000; 255 400 0 1000 500 0 1000; 257 600 0 1000; 258 700 0 1000; 259 800 0 1000; 260 900 0 1000 1000 0 1000; 262 1100 0 1000; 263 1200 0 1000; 264 1300 0 1000 1400 0 1000; 266 1500 0 1000; 267 1600 0 1000; 268 1700 0 1000 1800 0 1000; 270 1900 0 1000; 271 2000 0 1000; 272 2100 0 1000 2200 0 1000; 274 2300 0 1000; 275 2400 0 1000; 276 0 0 1100 100 0 1100; 278 200 0 1100; 279 300 0 1100; 280 400 0 1100; 281 500 0 1100 600 0 1100; 283 700 0 1100; 284 800 0 1100; 285 900 0 1100 1000 0 1100; 287 1100 0 1100; 288 1200 0 1100; 289 1300 0 1100 1400 0 1100; 291 1500 0 1100; 292 1600 0 1100; 293 1700 0 1100 1800 0 1100; 295 1900 0 1100; 296 2000 0 1100; 297 2100 0 1100 2200 0 1100; 299 2300 0 1100; 300 2400 0 1100; 301 0 0 1200 100 0 1200; 303 200 0 1200; 304 300 0 1200; 305 400 0 1200; 306 500 0 1200 600 0 1200; 308 700 0 1200; 309 800 0 1200; 310 900 0 1200 1000 0 1200; 312 1100 0 1200; 313 1200 0 1200; 314 1300 0 1200 1400 0 1200; 316 1500 0 1200; 317 1600 0 1200; 318 1700 0 1200 1800 0 1200; 320 1900 0 1200; 321 2000 0 1200; 322 2100 0 1200 2200 0 1200; 324 2300 0 1200; 325 2400 0 1200; 326 0 0 1300 100 0 1300; 328 200 0 1300; 329 300 0 1300; 330 400 0 1300; 331 500 0 1300 600 0 1300; 333 700 0 1300; 334 800 0 1300; 335 900 0 1300 1000 0 1300; 337 1100 0 1300; 338 1200 0 1300; 339 1300 0 1300 1400 0 1300; 341 1500 0 1300; 342 1600 0 1300; 343 1700 0 1300 1800 0 1300; 345 1900 0 1300; 346 2000 0 1300; 347 2100 0 1300 2200 0 1300; 349 2300 0 1300; 350 2400 0 1300; 351 0 0 1400 100 0 1400; 353 200 0 1400; 354 300 0 1400; 355 400 0 1400; 356 500 0 1400 600 0 1400; 358 700 0 1400; 359 800 0 1400; 360 900 0 1400 1000 0 1400; 362 1100 0 1400; 363 1200 0 1400; 364 1300 0 1400 1400 0 1400; 366 1500 0 1400; 367 1600 0 1400; 368 1700 0 1400 1800 0 1400; 370 1900 0 1400; 371 2000 0 1400; 372 2100 0 1400 2200 0 1400; 374 2300 0 1400; 375 2400 0 1400; 376 0 0 1500 100 0 1500; 378 200 0 1500; 379 300 0 1500; 380 400 0 1500; 381 500 0 1500 600 0 1500; 383 700 0 1500; 384 800 0 1500; 385 900 0 1500 1000 0 1500; 387 1100 0 1500; 388 1200 0 1500; 389 1300 0 1500 1400 0 1500; 391 1500 0 1500; 392 1600 0 1500; 393 1700 0 1500 1800 0 1500; 395 1900 0 1500; 396 2000 0 1500; 397 2100 0 1500 2200 0 1500; 399 2300 0 1500; 400 2400 0 1500; 401 0 0 1600 100 0 1600; 403 200 0 1600; 404 300 0 1600; 405 400 0 1600; 406 500 0 1600 600 0 1600; 408 700 0 1600; 409 800 0 1600; 410 900 0 1600 1000 0 1600; 412 1100 0 1600; 413 1200 0 1600; 414 1300 0 1600 1400 0 1600; 416 1500 0 1600; 417 1600 0 1600; 418 1700 0 1600 1800 0 1600; 420 1900 0 1600; 421 2000 0 1600; 422 2100 0 1600 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 2 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 98. 99. 100. 101. 102. 103. 104. 105. 106. 107. 108. 109. 110. 111. 112. 113. 114. 115. 116. 117. 118. 119. 120. 121. 122. 123. 124. 125. 126. 127. 128. 129. 130. 131. 132. 133. 134. 135. 136. 137. 138. 139. 140. 141. 142. 143. 144. 145. 146. 147. 148. 149. 150. 151. 152. 153. 423 428 433 438 443 448 453 457 461 465 469 473 477 481 485 489 493 497 501 505 509 513 517 521 525 529 533 537 541 545 549 553 557 562 567 572 577 582 586 590 594 598 602 606 610 614 618 622 626 630 634 638 642 646 650 654 -- PAGE NO. 3 2200 0 1600; 424 2300 0 1600; 425 2400 0 1600; 426 0 100 0; 427 100 100 0 200 100 0; 429 300 100 0; 430 400 100 0; 431 500 100 0; 432 600 100 0 700 100 0; 434 800 100 0; 435 900 100 0; 436 1000 100 0; 437 1100 100 0 1200 100 0; 439 1300 100 0; 440 1400 100 0; 441 1500 100 0; 442 1600 100 0 1700 100 0; 444 1800 100 0; 445 1900 100 0; 446 2000 100 0; 447 2100 100 0 2200 100 0; 449 2300 100 0; 450 2400 100 0; 451 0 100 100; 452 800 100 100 1600 100 100; 454 2400 100 100; 455 0 100 200; 456 800 100 200 1600 100 200; 458 2400 100 200; 459 0 100 300; 460 800 100 300 1600 100 300; 462 2400 100 300; 463 0 100 400; 464 800 100 400 1600 100 400; 466 2400 100 400; 467 0 100 500; 468 800 100 500 1600 100 500; 470 2400 100 500; 471 0 100 600; 472 800 100 600 1600 100 600; 474 2400 100 600; 475 0 100 700; 476 800 100 700 1600 100 700; 478 2400 100 700; 479 0 100 800; 480 100 100 800 200 100 800; 482 300 100 800; 483 400 100 800; 484 500 100 800 600 100 800; 486 700 100 800; 487 800 100 800; 488 900 100 800 1000 100 800; 490 1100 100 800; 491 1200 100 800; 492 1300 100 800 1400 100 800; 494 1500 100 800; 495 1600 100 800; 496 1700 100 800 1800 100 800; 498 1900 100 800; 499 2000 100 800; 500 2100 100 800 2200 100 800; 502 2300 100 800; 503 2400 100 800; 504 0 100 900 800 100 900; 506 1600 100 900; 507 2400 100 900; 508 0 100 1000 800 100 1000; 510 1600 100 1000; 511 2400 100 1000; 512 0 100 1100 800 100 1100; 514 1600 100 1100; 515 2400 100 1100; 516 0 100 1200 800 100 1200; 518 1600 100 1200; 519 2400 100 1200; 520 0 100 1300 800 100 1300; 522 1600 100 1300; 523 2400 100 1300; 524 0 100 1400 800 100 1400; 526 1600 100 1400; 527 2400 100 1400; 528 0 100 1500 800 100 1500; 530 1600 100 1500; 531 2400 100 1500; 532 0 100 1600 100 100 1600; 534 200 100 1600; 535 300 100 1600; 536 400 100 1600 500 100 1600; 538 600 100 1600; 539 700 100 1600; 540 800 100 1600 900 100 1600; 542 1000 100 1600; 543 1100 100 1600; 544 1200 100 1600 1300 100 1600; 546 1400 100 1600; 547 1500 100 1600; 548 1600 100 1600 1700 100 1600; 550 1800 100 1600; 551 1900 100 1600; 552 2000 100 1600 2100 100 1600; 554 2200 100 1600; 555 2300 100 1600; 556 2400 100 1600 0 200 0; 558 100 200 0; 559 200 200 0; 560 300 200 0; 561 400 200 0 500 200 0; 563 600 200 0; 564 700 200 0; 565 800 200 0; 566 900 200 0 1000 200 0; 568 1100 200 0; 569 1200 200 0; 570 1300 200 0; 571 1400 200 0 1500 200 0; 573 1600 200 0; 574 1700 200 0; 575 1800 200 0; 576 1900 200 0 2000 200 0; 578 2100 200 0; 579 2200 200 0; 580 2300 200 0; 581 2400 200 0 0 200 100; 583 800 200 100; 584 1600 200 100; 585 2400 200 100 0 200 200; 587 800 200 200; 588 1600 200 200; 589 2400 200 200 0 200 300; 591 800 200 300; 592 1600 200 300; 593 2400 200 300 0 200 400; 595 800 200 400; 596 1600 200 400; 597 2400 200 400 0 200 500; 599 800 200 500; 600 1600 200 500; 601 2400 200 500 0 200 600; 603 800 200 600; 604 1600 200 600; 605 2400 200 600 0 200 700; 607 800 200 700; 608 1600 200 700; 609 2400 200 700 0 200 800; 611 100 200 800; 612 200 200 800; 613 300 200 800 400 200 800; 615 500 200 800; 616 600 200 800; 617 700 200 800 800 200 800; 619 900 200 800; 620 1000 200 800; 621 1100 200 800 1200 200 800; 623 1300 200 800; 624 1400 200 800; 625 1500 200 800 1600 200 800; 627 1700 200 800; 628 1800 200 800; 629 1900 200 800 2000 200 800; 631 2100 200 800; 632 2200 200 800; 633 2300 200 800 2400 200 800; 635 0 200 900; 636 800 200 900; 637 1600 200 900 2400 200 900; 639 0 200 1000; 640 800 200 1000; 641 1600 200 1000 2400 200 1000; 643 0 200 1100; 644 800 200 1100; 645 1600 200 1100 2400 200 1100; 647 0 200 1200; 648 800 200 1200; 649 1600 200 1200 2400 200 1200; 651 0 200 1300; 652 800 200 1300; 653 1600 200 1300 2400 200 1300; 655 0 200 1400; 656 800 200 1400; 657 1600 200 1400 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 3 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 154. 155. 156. 157. 158. 159. 160. 161. 162. 163. 164. 165. 166. 167. 168. 169. 170. 171. 172. 173. 174. 175. 176. 177. 178. 179. 180. 181. 182. 183. 184. 185. 186. 187. 188. 189. 190. 191. 192. 193. 194. 195. 196. 197. 198. 199. 200. 201. 202. 203. 204. 205. 206. 207. 208. 209. 658 662 666 670 674 678 682 686 690 695 700 705 710 715 719 723 727 731 735 739 743 747 751 755 759 763 767 771 775 779 783 787 791 795 799 803 807 811 815 819 824 829 834 839 844 848 852 856 860 864 868 872 876 880 884 888 -- PAGE NO. 4 2400 200 1400; 659 0 200 1500; 660 800 200 1500; 661 1600 200 1500 2400 200 1500; 663 0 200 1600; 664 100 200 1600; 665 200 200 1600 300 200 1600; 667 400 200 1600; 668 500 200 1600; 669 600 200 1600 700 200 1600; 671 800 200 1600; 672 900 200 1600; 673 1000 200 1600 1100 200 1600; 675 1200 200 1600; 676 1300 200 1600; 677 1400 200 1600 1500 200 1600; 679 1600 200 1600; 680 1700 200 1600; 681 1800 200 1600 1900 200 1600; 683 2000 200 1600; 684 2100 200 1600; 685 2200 200 1600 2300 200 1600; 687 2400 200 1600; 688 0 300 0; 689 100 300 0 200 300 0; 691 300 300 0; 692 400 300 0; 693 500 300 0; 694 600 300 0 700 300 0; 696 800 300 0; 697 900 300 0; 698 1000 300 0; 699 1100 300 0 1200 300 0; 701 1300 300 0; 702 1400 300 0; 703 1500 300 0; 704 1600 300 0 1700 300 0; 706 1800 300 0; 707 1900 300 0; 708 2000 300 0; 709 2100 300 0 2200 300 0; 711 2300 300 0; 712 2400 300 0; 713 0 300 100; 714 800 300 100 1600 300 100; 716 2400 300 100; 717 0 300 200; 718 800 300 200 1600 300 200; 720 2400 300 200; 721 0 300 300; 722 800 300 300 1600 300 300; 724 2400 300 300; 725 0 300 400; 726 800 300 400 1600 300 400; 728 2400 300 400; 729 0 300 500; 730 800 300 500 1600 300 500; 732 2400 300 500; 733 0 300 600; 734 800 300 600 1600 300 600; 736 2400 300 600; 737 0 300 700; 738 800 300 700 1600 300 700; 740 2400 300 700; 741 0 300 800; 742 100 300 800 200 300 800; 744 300 300 800; 745 400 300 800; 746 500 300 800 600 300 800; 748 700 300 800; 749 800 300 800; 750 900 300 800 1000 300 800; 752 1100 300 800; 753 1200 300 800; 754 1300 300 800 1400 300 800; 756 1500 300 800; 757 1600 300 800; 758 1700 300 800 1800 300 800; 760 1900 300 800; 761 2000 300 800; 762 2100 300 800 2200 300 800; 764 2300 300 800; 765 2400 300 800; 766 0 300 900 800 300 900; 768 1600 300 900; 769 2400 300 900; 770 0 300 1000 800 300 1000; 772 1600 300 1000; 773 2400 300 1000; 774 0 300 1100 800 300 1100; 776 1600 300 1100; 777 2400 300 1100; 778 0 300 1200 800 300 1200; 780 1600 300 1200; 781 2400 300 1200; 782 0 300 1300 800 300 1300; 784 1600 300 1300; 785 2400 300 1300; 786 0 300 1400 800 300 1400; 788 1600 300 1400; 789 2400 300 1400; 790 0 300 1500 800 300 1500; 792 1600 300 1500; 793 2400 300 1500; 794 0 300 1600 100 300 1600; 796 200 300 1600; 797 300 300 1600; 798 400 300 1600 500 300 1600; 800 600 300 1600; 801 700 300 1600; 802 800 300 1600 900 300 1600; 804 1000 300 1600; 805 1100 300 1600; 806 1200 300 1600 1300 300 1600; 808 1400 300 1600; 809 1500 300 1600; 810 1600 300 1600 1700 300 1600; 812 1800 300 1600; 813 1900 300 1600; 814 2000 300 1600 2100 300 1600; 816 2200 300 1600; 817 2300 300 1600; 818 2400 300 1600 0 400 0; 820 100 400 0; 821 200 400 0; 822 300 400 0; 823 400 400 0 500 400 0; 825 600 400 0; 826 700 400 0; 827 800 400 0; 828 900 400 0 1000 400 0; 830 1100 400 0; 831 1200 400 0; 832 1300 400 0; 833 1400 400 0 1500 400 0; 835 1600 400 0; 836 1700 400 0; 837 1800 400 0; 838 1900 400 0 2000 400 0; 840 2100 400 0; 841 2200 400 0; 842 2300 400 0; 843 2400 400 0 0 400 100; 845 800 400 100; 846 1600 400 100; 847 2400 400 100 0 400 200; 849 800 400 200; 850 1600 400 200; 851 2400 400 200 0 400 300; 853 800 400 300; 854 1600 400 300; 855 2400 400 300 0 400 400; 857 800 400 400; 858 1600 400 400; 859 2400 400 400 0 400 500; 861 800 400 500; 862 1600 400 500; 863 2400 400 500 800 400 600; 865 1600 400 600; 866 2400 400 600; 867 800 400 700 1600 400 700; 869 0 400 800; 870 100 400 800; 871 200 400 800 300 400 800; 873 400 400 800; 874 500 400 800; 875 600 400 800 700 400 800; 877 800 400 800; 878 900 400 800; 879 1000 400 800 1100 400 800; 881 1200 400 800; 882 1300 400 800; 883 1400 400 800 1500 400 800; 885 1600 400 800; 886 1700 400 800; 887 1800 400 800 1900 400 800; 889 2000 400 800; 890 2100 400 800; 891 2200 400 800 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 4 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 210. 211. 212. 213. 214. 215. 216. 217. 218. 219. 220. 221. 222. 223. 224. 225. 226. 227. 228. 229. 230. 231. 232. 233. 234. 235. 236. 237. 238. 239. 240. 241. 242. 243. 244. 245. 246. 247. 248. 249. 250. 251. 252. 253. 254. 255. 256. 257. 258. 259. 260. 261. 262. 263. 264. 265. -- PAGE NO. 5 892 2300 400 800; 893 2400 400 800; 894 800 400 900; 895 1600 400 900 896 800 400 1000; 897 1600 400 1000; 898 2400 400 1000; 899 0 400 1100 900 800 400 1100; 901 1600 400 1100; 902 2400 400 1100; 903 0 400 1200 904 800 400 1200; 905 1600 400 1200; 906 2400 400 1200; 907 0 400 1300 908 800 400 1300; 909 1600 400 1300; 910 2400 400 1300; 911 0 400 1400 912 800 400 1400; 913 1600 400 1400; 914 2400 400 1400; 915 0 400 1500 916 800 400 1500; 917 1600 400 1500; 918 2400 400 1500; 919 0 400 1600 920 100 400 1600; 921 200 400 1600; 922 300 400 1600; 923 400 400 1600 924 500 400 1600; 925 600 400 1600; 926 700 400 1600; 927 800 400 1600 928 900 400 1600; 929 1000 400 1600; 930 1100 400 1600; 931 1200 400 1600 932 1300 400 1600; 933 1400 400 1600; 934 1500 400 1600; 935 1600 400 1600 936 1700 400 1600; 937 1800 400 1600; 938 1900 400 1600; 939 2000 400 1600 940 2100 400 1600; 941 2200 400 1600; 942 2300 400 1600; 943 2400 400 1600 944 0 500 0; 945 100 500 0; 946 200 500 0; 947 300 500 0; 948 400 500 0 949 500 500 0; 950 600 500 0; 951 700 500 0; 952 800 500 0; 953 900 500 0 954 1000 500 0; 955 1100 500 0; 956 1200 500 0; 957 1300 500 0; 958 1400 500 0 959 1500 500 0; 960 1600 500 0; 961 1700 500 0; 962 1800 500 0; 963 1900 500 0 964 2000 500 0; 965 2100 500 0; 966 2200 500 0; 967 2300 500 0; 968 2400 500 0 969 0 500 100; 970 800 500 100; 971 1600 500 100; 972 2400 500 100 973 0 500 200; 974 800 500 200; 975 1600 500 200; 976 2400 500 200 977 0 500 300; 978 800 500 300; 979 1600 500 300; 980 2400 500 300 981 0 500 400; 982 800 500 400; 983 1600 500 400; 984 2400 500 400 985 0 500 500; 986 800 500 500; 987 1600 500 500; 988 2400 500 500 989 800 500 600; 990 1600 500 600; 991 2400 500 600; 992 800 500 700 993 1600 500 700; 994 0 500 800; 995 100 500 800; 996 200 500 800 997 300 500 800; 998 400 500 800; 999 500 500 800; 1000 600 500 800 1001 700 500 800; 1002 800 500 800; 1003 900 500 800; 1004 1000 500 800 1005 1100 500 800; 1006 1200 500 800; 1007 1300 500 800; 1008 1400 500 800 1009 1500 500 800; 1010 1600 500 800; 1011 1700 500 800; 1012 1800 500 800 1013 1900 500 800; 1014 2000 500 800; 1015 2100 500 800; 1016 2200 500 800 1017 2300 500 800; 1018 2400 500 800; 1019 800 500 900; 1020 1600 500 900 1021 800 500 1000; 1022 1600 500 1000; 1023 2400 500 1000; 1024 0 500 1100 1025 800 500 1100; 1026 1600 500 1100; 1027 2400 500 1100; 1028 0 500 1200 1029 800 500 1200; 1030 1600 500 1200; 1031 2400 500 1200; 1032 0 500 1300 1033 800 500 1300; 1034 1600 500 1300; 1035 2400 500 1300; 1036 0 500 1400 1037 800 500 1400; 1038 1600 500 1400; 1039 2400 500 1400; 1040 0 500 1500 1041 800 500 1500; 1042 1600 500 1500; 1043 2400 500 1500; 1044 0 500 1600 1045 100 500 1600; 1046 200 500 1600; 1047 300 500 1600; 1048 400 500 1600 1049 500 500 1600; 1050 600 500 1600; 1051 700 500 1600; 1052 800 500 1600 1053 900 500 1600; 1054 1000 500 1600; 1055 1100 500 1600; 1056 1200 500 1600 1057 1300 500 1600; 1058 1400 500 1600; 1059 1500 500 1600; 1060 1600 500 1600 1061 1700 500 1600; 1062 1800 500 1600; 1063 1900 500 1600; 1064 2000 500 1600 1065 2100 500 1600; 1066 2200 500 1600; 1067 2300 500 1600; 1068 2400 500 1600 1069 0 600 0; 1070 100 600 0; 1071 200 600 0; 1072 300 600 0; 1073 400 600 0 1074 500 600 0; 1075 600 600 0; 1076 700 600 0; 1077 800 600 0; 1078 900 600 0 1079 1000 600 0; 1080 1100 600 0; 1081 1200 600 0; 1082 1300 600 0 1083 1400 600 0; 1084 1500 600 0; 1085 1600 600 0; 1086 1700 600 0 1087 1800 600 0; 1088 1900 600 0; 1089 2000 600 0; 1090 2100 600 0 1091 2200 600 0; 1092 2300 600 0; 1093 2400 600 0; 1094 0 600 100 1095 800 600 100; 1096 1600 600 100; 1097 2400 600 100; 1098 0 600 200 1099 800 600 200; 1100 1600 600 200; 1101 2400 600 200; 1102 0 600 300 1103 800 600 300; 1104 1600 600 300; 1105 2400 600 300; 1106 0 600 400 1107 800 600 400; 1108 1600 600 400; 1109 2400 600 400; 1110 0 600 500 1111 800 600 500; 1112 1600 600 500; 1113 2400 600 500; 1114 800 600 600 1115 1600 600 600; 1116 2400 600 600; 1117 800 600 700; 1118 1600 600 700 1119 0 600 800; 1120 100 600 800; 1121 200 600 800; 1122 300 600 800 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 5 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 266. 267. 268. 269. 270. 271. 272. 273. 274. 275. 276. 277. 278. 279. 280. 281. 282. 283. 284. 285. 286. 287. 288. 289. 290. 291. 292. 293. 294. 295. 296. 297. 298. 299. 300. 301. 302. 303. 304. 305. 306. 307. 308. 309. 310. 311. 312. 313. 314. 315. 316. 317. 318. 319. 320. 321. 1123 1127 1131 1135 1139 1143 1147 1151 1155 1159 1163 1167 1171 1175 1179 1183 1187 1191 1195 1199 1203 1207 1211 1215 1219 1223 1227 1231 1235 1239 1243 1247 1251 1255 1259 1263 1267 1271 1275 1279 1283 1287 1291 1295 1299 1303 1307 1311 1315 1319 1323 1327 1331 1335 1339 1343 -- PAGE NO. 6 400 600 800; 1124 500 600 800; 1125 600 600 800; 1126 700 600 800 800 600 800; 1128 900 600 800; 1129 1000 600 800; 1130 1100 600 800 1200 600 800; 1132 1300 600 800; 1133 1400 600 800; 1134 1500 600 800 1600 600 800; 1136 1700 600 800; 1137 1800 600 800; 1138 1900 600 800 2000 600 800; 1140 2100 600 800; 1141 2200 600 800; 1142 2300 600 800 2400 600 800; 1144 800 600 900; 1145 1600 600 900; 1146 800 600 1000 1600 600 1000; 1148 2400 600 1000; 1149 0 600 1100; 1150 800 600 1100 1600 600 1100; 1152 2400 600 1100; 1153 0 600 1200; 1154 800 600 1200 1600 600 1200; 1156 2400 600 1200; 1157 0 600 1300; 1158 800 600 1300 1600 600 1300; 1160 2400 600 1300; 1161 0 600 1400; 1162 800 600 1400 1600 600 1400; 1164 2400 600 1400; 1165 0 600 1500; 1166 800 600 1500 1600 600 1500; 1168 2400 600 1500; 1169 0 600 1600; 1170 100 600 1600 200 600 1600; 1172 300 600 1600; 1173 400 600 1600; 1174 500 600 1600 600 600 1600; 1176 700 600 1600; 1177 800 600 1600; 1178 900 600 1600 1000 600 1600; 1180 1100 600 1600; 1181 1200 600 1600; 1182 1300 600 1600 1400 600 1600; 1184 1500 600 1600; 1185 1600 600 1600; 1186 1700 600 1600 1800 600 1600; 1188 1900 600 1600; 1189 2000 600 1600; 1190 2100 600 1600 2200 600 1600; 1192 2300 600 1600; 1193 2400 600 1600; 1194 -400 300 500 -400 300 600; 1196 -400 300 700; 1197 -400 300 800; 1198 -400 300 900 -400 300 1000; 1200 -400 300 1100; 1201 -300 300 500; 1202 -300 300 600 -300 300 700; 1204 -300 300 800; 1205 -300 300 900; 1206 -300 300 1000 -300 300 1100; 1208 -200 300 500; 1209 -200 300 600; 1210 -200 300 700 -200 300 800; 1212 -200 300 900; 1213 -200 300 1000; 1214 -200 300 1100 -100 300 500; 1216 -100 300 600; 1217 -100 300 700; 1218 -100 300 800 -100 300 900; 1220 -100 300 1000; 1221 -100 300 1100; 1222 -400 400 500 -400 400 600; 1224 -400 400 700; 1225 -400 400 800; 1226 -400 400 900 -400 400 1000; 1228 -400 400 1100; 1229 -300 400 500; 1230 -300 400 1100 -200 400 500; 1232 -200 400 600; 1233 -200 400 700; 1234 -200 400 800 -200 400 900; 1236 -200 400 1000; 1237 -200 400 1100; 1238 -100 400 500 -100 400 800; 1240 -100 400 1100; 1241 -400 500 500; 1242 -400 500 600 -400 500 700; 1244 -400 500 800; 1245 -400 500 900; 1246 -400 500 1000 -400 500 1100; 1248 -300 500 500; 1249 -300 500 1100; 1250 -200 500 500 -200 500 600; 1252 -200 500 700; 1253 -200 500 800; 1254 -200 500 900 -200 500 1000; 1256 -200 500 1100; 1257 -100 500 500; 1258 -100 500 800 -100 500 1100; 1260 -400 600 500; 1261 -400 600 600; 1262 -400 600 700 -400 600 800; 1264 -400 600 900; 1265 -400 600 1000; 1266 -400 600 1100 -200 600 500; 1268 -200 600 600; 1269 -200 600 700; 1270 -200 600 800 -200 600 900; 1272 -200 600 1000; 1273 -200 600 1100; 1274 -300 600 500 -100 600 500; 1276 -100 600 800; 1277 -300 600 1100; 1278 -100 600 1100 -400 0 500; 1280 -400 0 1100; 1281 2500 300 0; 1282 2500 300 100 2500 300 200; 1284 2500 300 300; 1285 2500 300 400; 1286 2500 300 500 2500 300 600; 1288 2500 300 700; 1289 2500 300 800; 1290 2500 300 900 2500 300 1000; 1292 2500 300 1100; 1293 2500 300 1200; 1294 2500 300 1300 2500 300 1400; 1296 2500 300 1500; 1297 2500 300 1600; 1298 2600 300 0 2600 300 100; 1300 2600 300 200; 1301 2600 300 300; 1302 2600 300 400 2600 300 500; 1304 2600 300 600; 1305 2600 300 700; 1306 2600 300 800 2600 300 900; 1308 2600 300 1000; 1309 2600 300 1100; 1310 2600 300 1200 2600 300 1300; 1312 2600 300 1400; 1313 2600 300 1500; 1314 2600 300 1600 2600 400 0; 1316 2600 400 100; 1317 2600 400 200; 1318 2600 400 300 2600 400 400; 1320 2600 400 500; 1321 2600 400 600; 1322 2600 400 700 2600 400 800; 1324 2600 400 900; 1325 2600 400 1000; 1326 2600 400 1100 2600 400 1200; 1328 2600 400 1300; 1329 2600 400 1400; 1330 2600 400 1500 2600 400 1600; 1332 2600 500 0; 1333 2600 500 100; 1334 2600 500 200 2600 500 300; 1336 2600 500 400; 1337 2600 500 500; 1338 2600 500 600 2600 500 700; 1340 2600 500 800; 1341 2600 500 900; 1342 2600 500 1000 2600 500 1100; 1344 2600 500 1200; 1345 2600 500 1300; 1346 2600 500 1400 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 6 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 322. 323. 324. 325. 326. 327. 328. 329. 330. 331. 332. 333. 334. 335. 336. 337. 338. 339. 340. 341. 342. 343. 344. 345. 346. 347. 348. 349. 350. 351. 352. 353. 354. 355. 356. 357. 358. 359. 360. 361. 362. 363. 364. 365. 366. 367. 368. 369. 370. 371. 372. 373. 374. 375. 376. 377. -- PAGE NO. 7 1347 2600 500 1500; 1348 2600 500 1600; 1349 2600 600 0; 1350 2600 600 100 1351 2600 600 200; 1352 2600 600 300; 1353 2600 600 400; 1354 2600 600 500 1355 2600 600 600; 1356 2600 600 700; 1357 2600 600 800; 1358 2600 600 900 1359 2600 600 1000; 1360 2600 600 1100; 1361 2600 600 1200; 1362 2600 600 1300 1363 2600 600 1400; 1364 2600 600 1500; 1365 2600 600 1600; 1366 400 600 400 1367 400 600 1200; 1368 1200 600 400; 1369 1200 600 1200; 1370 2000 600 400 1371 2000 600 1200; 1372 2600 0 0; 1373 2600 0 1600; 1374 2600 0 800 MEMBER INCIDENCES 1 1 2; 2 2 3; 3 3 4; 4 4 5; 5 5 6; 6 6 7; 7 7 8; 8 8 9; 9 9 10; 10 10 11 11 11 12; 12 12 13; 13 13 14; 14 14 15; 15 15 16; 16 16 17; 17 17 18; 18 18 19 19 19 20; 20 20 21; 21 21 22; 22 22 23; 23 23 24; 24 24 25; 25 26 27; 26 27 28 27 28 29; 28 29 30; 29 30 31; 30 31 32; 31 32 33; 32 33 34; 33 34 35; 34 35 36 35 36 37; 36 37 38; 37 38 39; 38 39 40; 39 40 41; 40 41 42; 41 42 43; 42 43 44 43 44 45; 44 45 46; 45 46 47; 46 47 48; 47 48 49; 48 49 50; 49 51 52; 50 52 53 51 53 54; 52 54 55; 53 55 56; 54 56 57; 55 57 58; 56 58 59; 57 59 60; 58 60 61 59 61 62; 60 62 63; 61 63 64; 62 64 65; 63 65 66; 64 66 67; 65 67 68; 66 68 69 67 69 70; 68 70 71; 69 71 72; 70 72 73; 71 73 74; 72 74 75; 73 76 77; 74 77 78 75 78 79; 76 79 80; 77 80 81; 78 81 82; 79 82 83; 80 83 84; 81 84 85; 82 85 86 83 86 87; 84 87 88; 85 88 89; 86 89 90; 87 90 91; 88 91 92; 89 92 93; 90 93 94 91 94 95; 92 95 96; 93 96 97; 94 97 98; 95 98 99; 96 99 100; 97 101 102 98 102 103; 99 103 104; 100 104 105; 101 105 106; 102 106 107; 103 107 108 104 108 109; 105 109 110; 106 110 111; 107 111 112; 108 112 113; 109 113 114 110 114 115; 111 115 116; 112 116 117; 113 117 118; 114 118 119; 115 119 120 116 120 121; 117 121 122; 118 122 123; 119 123 124; 120 124 125; 121 126 127 122 127 128; 123 128 129; 124 129 130; 125 130 131; 126 131 132; 127 132 133 128 133 134; 129 134 135; 130 135 136; 131 136 137; 132 137 138; 133 138 139 134 139 140; 135 140 141; 136 141 142; 137 142 143; 138 143 144; 139 144 145 140 145 146; 141 146 147; 142 147 148; 143 148 149; 144 149 150; 145 151 152 146 152 153; 147 153 154; 148 154 155; 149 155 156; 150 156 157; 151 157 158 152 158 159; 153 159 160; 154 160 161; 155 161 162; 156 162 163; 157 163 164 158 164 165; 159 165 166; 160 166 167; 161 167 168; 162 168 169; 163 169 170 164 170 171; 165 171 172; 166 172 173; 167 173 174; 168 174 175; 169 176 177 170 177 178; 171 178 179; 172 179 180; 173 180 181; 174 181 182; 175 182 183 176 183 184; 177 184 185; 178 185 186; 179 186 187; 180 187 188; 181 188 189 182 189 190; 183 190 191; 184 191 192; 185 192 193; 186 193 194; 187 194 195 188 195 196; 189 196 197; 190 197 198; 191 198 199; 192 199 200; 193 201 202 194 202 203; 195 203 204; 196 204 205; 197 205 206; 198 206 207; 199 207 208 200 208 209; 201 209 210; 202 210 211; 203 211 212; 204 212 213; 205 213 214 206 214 215; 207 215 216; 208 216 217; 209 217 218; 210 218 219; 211 219 220 212 220 221; 213 221 222; 214 222 223; 215 223 224; 216 224 225; 217 226 227 218 227 228; 219 228 229; 220 229 230; 221 230 231; 222 231 232; 223 232 233 224 233 234; 225 234 235; 226 235 236; 227 236 237; 228 237 238; 229 238 239 230 239 240; 231 240 241; 232 241 242; 233 242 243; 234 243 244; 235 244 245 236 245 246; 237 246 247; 238 247 248; 239 248 249; 240 249 250; 241 251 252 242 252 253; 243 253 254; 244 254 255; 245 255 256; 246 256 257; 247 257 258 248 258 259; 249 259 260; 250 260 261; 251 261 262; 252 262 263; 253 263 264 254 264 265; 255 265 266; 256 266 267; 257 267 268; 258 268 269; 259 269 270 260 270 271; 261 271 272; 262 272 273; 263 273 274; 264 274 275; 265 276 277 266 277 278; 267 278 279; 268 279 280; 269 280 281; 270 281 282; 271 282 283 272 283 284; 273 284 285; 274 285 286; 275 286 287; 276 287 288; 277 288 289 278 289 290; 279 290 291; 280 291 292; 281 292 293; 282 293 294; 283 294 295 284 295 296; 285 296 297; 286 297 298; 287 298 299; 288 299 300; 289 301 302 290 302 303; 291 303 304; 292 304 305; 293 305 306; 294 306 307; 295 307 308 296 308 309; 297 309 310; 298 310 311; 299 311 312; 300 312 313; 301 313 314 302 314 315; 303 315 316; 304 316 317; 305 317 318; 306 318 319; 307 319 320 308 320 321; 309 321 322; 310 322 323; 311 323 324; 312 324 325; 313 326 327 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 7 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 378. 379. 380. 381. 382. 383. 384. 385. 386. 387. 388. 389. 390. 391. 392. 393. 394. 395. 396. 397. 398. 399. 400. 401. 402. 403. 404. 405. 406. 407. 408. 409. 410. 411. 412. 413. 414. 415. 416. 417. 418. 419. 420. 421. 422. 423. 424. 425. 426. 427. 428. 429. 430. 431. 432. 433. 314 320 326 332 338 344 350 356 362 368 374 380 386 392 398 404 410 416 422 428 434 440 446 452 458 464 470 476 482 488 494 500 506 512 518 524 530 536 542 548 554 560 566 572 578 584 590 596 602 608 614 620 626 632 638 644 -- PAGE NO. 8 327 328; 315 328 329; 316 329 330; 317 330 331; 318 331 332; 319 332 333 333 334; 321 334 335; 322 335 336; 323 336 337; 324 337 338; 325 338 339 339 340; 327 340 341; 328 341 342; 329 342 343; 330 343 344; 331 344 345 345 346; 333 346 347; 334 347 348; 335 348 349; 336 349 350; 337 351 352 352 353; 339 353 354; 340 354 355; 341 355 356; 342 356 357; 343 357 358 358 359; 345 359 360; 346 360 361; 347 361 362; 348 362 363; 349 363 364 364 365; 351 365 366; 352 366 367; 353 367 368; 354 368 369; 355 369 370 370 371; 357 371 372; 358 372 373; 359 373 374; 360 374 375; 361 376 377 377 378; 363 378 379; 364 379 380; 365 380 381; 366 381 382; 367 382 383 383 384; 369 384 385; 370 385 386; 371 386 387; 372 387 388; 373 388 389 389 390; 375 390 391; 376 391 392; 377 392 393; 378 393 394; 379 394 395 395 396; 381 396 397; 382 397 398; 383 398 399; 384 399 400; 385 401 402 402 403; 387 403 404; 388 404 405; 389 405 406; 390 406 407; 391 407 408 408 409; 393 409 410; 394 410 411; 395 411 412; 396 412 413; 397 413 414 414 415; 399 415 416; 400 416 417; 401 417 418; 402 418 419; 403 419 420 420 421; 405 421 422; 406 422 423; 407 423 424; 408 424 425; 409 1 26 26 51; 411 51 76; 412 76 101; 413 101 126; 414 126 151; 415 151 176 176 201; 417 201 226; 418 226 251; 419 251 276; 420 276 301; 421 301 326 326 351; 423 351 376; 424 376 401; 425 2 27; 426 27 52; 427 52 77 77 102; 429 102 127; 430 127 152; 431 152 177; 432 177 202; 433 202 227 227 252; 435 252 277; 436 277 302; 437 302 327; 438 327 352; 439 352 377 377 402; 441 3 28; 442 28 53; 443 53 78; 444 78 103; 445 103 128 128 153; 447 153 178; 448 178 203; 449 203 228; 450 228 253; 451 253 278 278 303; 453 303 328; 454 328 353; 455 353 378; 456 378 403; 457 4 29 29 54; 459 54 79; 460 79 104; 461 104 129; 462 129 154; 463 154 179 179 204; 465 204 229; 466 229 254; 467 254 279; 468 279 304; 469 304 329 329 354; 471 354 379; 472 379 404; 473 5 30; 474 30 55; 475 55 80 80 105; 477 105 130; 478 130 155; 479 155 180; 480 180 205; 481 205 230 230 255; 483 255 280; 484 280 305; 485 305 330; 486 330 355; 487 355 380 380 405; 489 6 31; 490 31 56; 491 56 81; 492 81 106; 493 106 131 131 156; 495 156 181; 496 181 206; 497 206 231; 498 231 256; 499 256 281 281 306; 501 306 331; 502 331 356; 503 356 381; 504 381 406; 505 7 32 32 57; 507 57 82; 508 82 107; 509 107 132; 510 132 157; 511 157 182 182 207; 513 207 232; 514 232 257; 515 257 282; 516 282 307; 517 307 332 332 357; 519 357 382; 520 382 407; 521 8 33; 522 33 58; 523 58 83 83 108; 525 108 133; 526 133 158; 527 158 183; 528 183 208; 529 208 233 233 258; 531 258 283; 532 283 308; 533 308 333; 534 333 358; 535 358 383 383 408; 537 9 34; 538 34 59; 539 59 84; 540 84 109; 541 109 134 134 159; 543 159 184; 544 184 209; 545 209 234; 546 234 259; 547 259 284 284 309; 549 309 334; 550 334 359; 551 359 384; 552 384 409; 553 10 35 35 60; 555 60 85; 556 85 110; 557 110 135; 558 135 160; 559 160 185 185 210; 561 210 235; 562 235 260; 563 260 285; 564 285 310; 565 310 335 335 360; 567 360 385; 568 385 410; 569 11 36; 570 36 61; 571 61 86 86 111; 573 111 136; 574 136 161; 575 161 186; 576 186 211; 577 211 236 236 261; 579 261 286; 580 286 311; 581 311 336; 582 336 361; 583 361 386 386 411; 585 12 37; 586 37 62; 587 62 87; 588 87 112; 589 112 137 137 162; 591 162 187; 592 187 212; 593 212 237; 594 237 262; 595 262 287 287 312; 597 312 337; 598 337 362; 599 362 387; 600 387 412; 601 13 38 38 63; 603 63 88; 604 88 113; 605 113 138; 606 138 163; 607 163 188 188 213; 609 213 238; 610 238 263; 611 263 288; 612 288 313; 613 313 338 338 363; 615 363 388; 616 388 413; 617 14 39; 618 39 64; 619 64 89 89 114; 621 114 139; 622 139 164; 623 164 189; 624 189 214; 625 214 239 239 264; 627 264 289; 628 289 314; 629 314 339; 630 339 364; 631 364 389 389 414; 633 15 40; 634 40 65; 635 65 90; 636 90 115; 637 115 140 140 165; 639 165 190; 640 190 215; 641 215 240; 642 240 265; 643 265 290 290 315; 645 315 340; 646 340 365; 647 365 390; 648 390 415; 649 16 41 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 8 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 434. 435. 436. 437. 438. 439. 440. 441. 442. 443. 444. 445. 446. 447. 448. 449. 450. 451. 452. 453. 454. 455. 456. 457. 458. 459. 460. 461. 462. 463. 464. 465. 466. 467. 468. 469. 470. 471. 472. 473. 474. 475. 476. 477. 478. 479. 480. 481. 482. 483. 484. 485. 486. 487. 488. 489. 650 656 662 668 674 680 686 692 698 704 710 716 722 728 734 740 746 752 758 764 770 776 782 788 794 800 806 812 818 824 830 836 842 848 854 860 866 872 878 884 890 896 902 908 914 920 926 932 938 944 950 956 962 968 974 980 -- PAGE NO. 9 41 66; 651 66 91; 652 91 116; 653 116 141; 654 141 166; 655 166 191 191 216; 657 216 241; 658 241 266; 659 266 291; 660 291 316; 661 316 341 341 366; 663 366 391; 664 391 416; 665 17 42; 666 42 67; 667 67 92 92 117; 669 117 142; 670 142 167; 671 167 192; 672 192 217; 673 217 242 242 267; 675 267 292; 676 292 317; 677 317 342; 678 342 367; 679 367 392 392 417; 681 18 43; 682 43 68; 683 68 93; 684 93 118; 685 118 143 143 168; 687 168 193; 688 193 218; 689 218 243; 690 243 268; 691 268 293 293 318; 693 318 343; 694 343 368; 695 368 393; 696 393 418; 697 19 44 44 69; 699 69 94; 700 94 119; 701 119 144; 702 144 169; 703 169 194 194 219; 705 219 244; 706 244 269; 707 269 294; 708 294 319; 709 319 344 344 369; 711 369 394; 712 394 419; 713 20 45; 714 45 70; 715 70 95 95 120; 717 120 145; 718 145 170; 719 170 195; 720 195 220; 721 220 245 245 270; 723 270 295; 724 295 320; 725 320 345; 726 345 370; 727 370 395 395 420; 729 21 46; 730 46 71; 731 71 96; 732 96 121; 733 121 146 146 171; 735 171 196; 736 196 221; 737 221 246; 738 246 271; 739 271 296 296 321; 741 321 346; 742 346 371; 743 371 396; 744 396 421; 745 22 47 47 72; 747 72 97; 748 97 122; 749 122 147; 750 147 172; 751 172 197 197 222; 753 222 247; 754 247 272; 755 272 297; 756 297 322; 757 322 347 347 372; 759 372 397; 760 397 422; 761 23 48; 762 48 73; 763 73 98 98 123; 765 123 148; 766 148 173; 767 173 198; 768 198 223; 769 223 248 248 273; 771 273 298; 772 298 323; 773 323 348; 774 348 373; 775 373 398 398 423; 777 24 49; 778 49 74; 779 74 99; 780 99 124; 781 124 149 149 174; 783 174 199; 784 199 224; 785 224 249; 786 249 274; 787 274 299 299 324; 789 324 349; 790 349 374; 791 374 399; 792 399 424; 793 25 50 50 75; 795 75 100; 796 100 125; 797 125 150; 798 150 175; 799 175 200 200 225; 801 225 250; 802 250 275; 803 275 300; 804 300 325; 805 325 350 350 375; 807 375 400; 808 400 425; 809 426 427; 810 427 428; 811 428 429 429 430; 813 430 431; 814 431 432; 815 432 433; 816 433 434; 817 434 435 435 436; 819 436 437; 820 437 438; 821 438 439; 822 439 440; 823 440 441 441 442; 825 442 443; 826 443 444; 827 444 445; 828 445 446; 829 446 447 447 448; 831 448 449; 832 449 450; 833 479 480; 834 480 481; 835 481 482 482 483; 837 483 484; 838 484 485; 839 485 486; 840 486 487; 841 487 488 488 489; 843 489 490; 844 490 491; 845 491 492; 846 492 493; 847 493 494 494 495; 849 495 496; 850 496 497; 851 497 498; 852 498 499; 853 499 500 500 501; 855 501 502; 856 502 503; 857 532 533; 858 533 534; 859 534 535 535 536; 861 536 537; 862 537 538; 863 538 539; 864 539 540; 865 540 541 541 542; 867 542 543; 868 543 544; 869 544 545; 870 545 546; 871 546 547 547 548; 873 548 549; 874 549 550; 875 550 551; 876 551 552; 877 552 553 553 554; 879 554 555; 880 555 556; 881 426 451; 882 451 455; 883 455 459 459 463; 885 463 467; 886 467 471; 887 471 475; 888 475 479; 889 479 504 504 508; 891 508 512; 892 512 516; 893 516 520; 894 520 524; 895 524 528 528 532; 897 434 452; 898 452 456; 899 456 460; 900 460 464; 901 464 468 468 472; 903 472 476; 904 476 487; 905 487 505; 906 505 509; 907 509 513 513 517; 909 517 521; 910 521 525; 911 525 529; 912 529 540; 913 442 453 453 457; 915 457 461; 916 461 465; 917 465 469; 918 469 473; 919 473 477 477 495; 921 495 506; 922 506 510; 923 510 514; 924 514 518; 925 518 522 522 526; 927 526 530; 928 530 548; 929 450 454; 930 454 458; 931 458 462 462 466; 933 466 470; 934 470 474; 935 474 478; 936 478 503; 937 503 507 507 511; 939 511 515; 940 515 519; 941 519 523; 942 523 527; 943 527 531 531 556; 945 557 558; 946 558 559; 947 559 560; 948 560 561; 949 561 562 562 563; 951 563 564; 952 564 565; 953 565 566; 954 566 567; 955 567 568 568 569; 957 569 570; 958 570 571; 959 571 572; 960 572 573; 961 573 574 574 575; 963 575 576; 964 576 577; 965 577 578; 966 578 579; 967 579 580 580 581; 969 610 611; 970 611 612; 971 612 613; 972 613 614; 973 614 615 615 616; 975 616 617; 976 617 618; 977 618 619; 978 619 620; 979 620 621 621 622; 981 622 623; 982 623 624; 983 624 625; 984 625 626; 985 626 627 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 9 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 490. 491. 492. 493. 494. 495. 496. 497. 498. 499. 500. 501. 502. 503. 504. 505. 506. 507. 508. 509. 510. 511. 512. 513. 514. 515. 516. 517. 518. 519. 520. 521. 522. 523. 524. 525. 526. 527. 528. 529. 530. 531. 532. 533. 534. 535. 536. 537. 538. 539. 540. 541. 542. 543. 544. 545. -- PAGE NO. 10 986 627 628; 987 628 629; 988 629 630; 989 630 631; 990 631 632; 991 632 633 992 633 634; 993 663 664; 994 664 665; 995 665 666; 996 666 667; 997 667 668 998 668 669; 999 669 670; 1000 670 671; 1001 671 672; 1002 672 673 1003 673 674; 1004 674 675; 1005 675 676; 1006 676 677; 1007 677 678 1008 678 679; 1009 679 680; 1010 680 681; 1011 681 682; 1012 682 683 1013 683 684; 1014 684 685; 1015 685 686; 1016 686 687; 1017 557 582 1018 582 586; 1019 586 590; 1020 590 594; 1021 594 598; 1022 598 602 1023 602 606; 1024 606 610; 1025 610 635; 1026 635 639; 1027 639 643 1028 643 647; 1029 647 651; 1030 651 655; 1031 655 659; 1032 659 663 1033 565 583; 1034 583 587; 1035 587 591; 1036 591 595; 1037 595 599 1038 599 603; 1039 603 607; 1040 607 618; 1041 618 636; 1042 636 640 1043 640 644; 1044 644 648; 1045 648 652; 1046 652 656; 1047 656 660 1048 660 671; 1049 573 584; 1050 584 588; 1051 588 592; 1052 592 596 1053 596 600; 1054 600 604; 1055 604 608; 1056 608 626; 1057 626 637 1058 637 641; 1059 641 645; 1060 645 649; 1061 649 653; 1062 653 657 1063 657 661; 1064 661 679; 1065 581 585; 1066 585 589; 1067 589 593 1068 593 597; 1069 597 601; 1070 601 605; 1071 605 609; 1072 609 634 1073 634 638; 1074 638 642; 1075 642 646; 1076 646 650; 1077 650 654 1078 654 658; 1079 658 662; 1080 662 687; 1081 688 689; 1082 689 690 1083 690 691; 1084 691 692; 1085 692 693; 1086 693 694; 1087 694 695 1088 695 696; 1089 696 697; 1090 697 698; 1091 698 699; 1092 699 700 1093 700 701; 1094 701 702; 1095 702 703; 1096 703 704; 1097 704 705 1098 705 706; 1099 706 707; 1100 707 708; 1101 708 709; 1102 709 710 1103 710 711; 1104 711 712; 1105 741 742; 1106 742 743; 1107 743 744 1108 744 745; 1109 745 746; 1110 746 747; 1111 747 748; 1112 748 749 1113 749 750; 1114 750 751; 1115 751 752; 1116 752 753; 1117 753 754 1118 754 755; 1119 755 756; 1120 756 757; 1121 757 758; 1122 758 759 1123 759 760; 1124 760 761; 1125 761 762; 1126 762 763; 1127 763 764 1128 764 765; 1129 794 795; 1130 795 796; 1131 796 797; 1132 797 798 1133 798 799; 1134 799 800; 1135 800 801; 1136 801 802; 1137 802 803 1138 803 804; 1139 804 805; 1140 805 806; 1141 806 807; 1142 807 808 1143 808 809; 1144 809 810; 1145 810 811; 1146 811 812; 1147 812 813 1148 813 814; 1149 814 815; 1150 815 816; 1151 816 817; 1152 817 818 1153 688 713; 1154 713 717; 1155 717 721; 1156 721 725; 1157 725 729 1158 729 733; 1159 733 737; 1160 737 741; 1161 741 766; 1162 766 770 1163 770 774; 1164 774 778; 1165 778 782; 1166 782 786; 1167 786 790 1168 790 794; 1169 696 714; 1170 714 718; 1171 718 722; 1172 722 726 1173 726 730; 1174 730 734; 1175 734 738; 1176 738 749; 1177 749 767 1178 767 771; 1179 771 775; 1180 775 779; 1181 779 783; 1182 783 787 1183 787 791; 1184 791 802; 1185 704 715; 1186 715 719; 1187 719 723 1188 723 727; 1189 727 731; 1190 731 735; 1191 735 739; 1192 739 757 1193 757 768; 1194 768 772; 1195 772 776; 1196 776 780; 1197 780 784 1198 784 788; 1199 788 792; 1200 792 810; 1201 712 716; 1202 716 720 1203 720 724; 1204 724 728; 1205 728 732; 1206 732 736; 1207 736 740 1208 740 765; 1209 765 769; 1210 769 773; 1211 773 777; 1212 777 781 1213 781 785; 1214 785 789; 1215 789 793; 1216 793 818; 1217 819 820 1218 820 821; 1219 821 822; 1220 822 823; 1221 823 824; 1222 824 825 1223 825 826; 1224 826 827; 1225 827 828; 1226 828 829; 1227 829 830 1228 830 831; 1229 831 832; 1230 832 833; 1231 833 834; 1232 834 835 1233 835 836; 1234 836 837; 1235 837 838; 1236 838 839; 1237 839 840 1238 840 841; 1239 841 842; 1240 842 843; 1241 869 870; 1242 870 871 1243 871 872; 1244 872 873; 1245 873 874; 1246 874 875; 1247 875 876 1248 876 877; 1249 877 878; 1250 878 879; 1251 879 880; 1252 880 881 1253 881 882; 1254 882 883; 1255 883 884; 1256 884 885; 1257 885 886 1258 886 887; 1259 887 888; 1260 888 889; 1261 889 890; 1262 890 891 1263 891 892; 1264 892 893; 1265 919 920; 1266 920 921; 1267 921 922 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 10 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 546. 547. 548. 549. 550. 551. 552. 553. 554. 555. 556. 557. 558. 559. 560. 561. 562. 563. 564. 565. 566. 567. 568. 569. 570. 571. 572. 573. 574. 575. 576. 577. 578. 579. 580. 581. 582. 583. 584. 585. 586. 587. 588. 589. 590. 591. 592. 593. 594. 595. 596. 597. 598. 599. 600. 601. 1268 1273 1278 1283 1288 1293 1298 1303 1308 1313 1318 1323 1328 1333 1338 1343 1348 1353 1358 1363 1368 1373 1378 1383 1388 1393 1398 1403 1408 1413 1418 1423 1428 1433 1438 1443 1448 1453 1458 1463 1468 1473 1478 1483 1488 1493 1498 1503 1508 1513 1518 1523 1528 1533 1538 1543 -- PAGE NO. 11 922 923; 1269 923 924; 1270 924 925; 1271 925 926; 1272 926 927 927 928; 1274 928 929; 1275 929 930; 1276 930 931; 1277 931 932 932 933; 1279 933 934; 1280 934 935; 1281 935 936; 1282 936 937 937 938; 1284 938 939; 1285 939 940; 1286 940 941; 1287 941 942 942 943; 1289 819 844; 1290 844 848; 1291 848 852; 1292 852 856 856 860; 1294 899 903; 1295 903 907; 1296 907 911; 1297 911 915 915 919; 1299 827 845; 1300 845 849; 1301 849 853; 1302 853 857 857 861; 1304 861 864; 1305 864 867; 1306 867 877; 1307 877 894 894 896; 1309 896 900; 1310 900 904; 1311 904 908; 1312 908 912 912 916; 1314 916 927; 1315 835 846; 1316 846 850; 1317 850 854 854 858; 1319 858 862; 1320 862 865; 1321 865 868; 1322 868 885 885 895; 1324 895 897; 1325 897 901; 1326 901 905; 1327 905 909 909 913; 1329 913 917; 1330 917 935; 1331 843 847; 1332 847 851 851 855; 1334 855 859; 1335 859 863; 1336 863 866; 1337 898 902 902 906; 1339 906 910; 1340 910 914; 1341 914 918; 1342 918 943 944 945; 1344 945 946; 1345 946 947; 1346 947 948; 1347 948 949 949 950; 1349 950 951; 1350 951 952; 1351 952 953; 1352 953 954 954 955; 1354 955 956; 1355 956 957; 1356 957 958; 1357 958 959 959 960; 1359 960 961; 1360 961 962; 1361 962 963; 1362 963 964 964 965; 1364 965 966; 1365 966 967; 1366 967 968; 1367 994 995 995 996; 1369 996 997; 1370 997 998; 1371 998 999; 1372 999 1000 1000 1001; 1374 1001 1002; 1375 1002 1003; 1376 1003 1004; 1377 1004 1005 1005 1006; 1379 1006 1007; 1380 1007 1008; 1381 1008 1009; 1382 1009 1010 1010 1011; 1384 1011 1012; 1385 1012 1013; 1386 1013 1014; 1387 1014 1015 1015 1016; 1389 1016 1017; 1390 1017 1018; 1391 1044 1045; 1392 1045 1046 1046 1047; 1394 1047 1048; 1395 1048 1049; 1396 1049 1050; 1397 1050 1051 1051 1052; 1399 1052 1053; 1400 1053 1054; 1401 1054 1055; 1402 1055 1056 1056 1057; 1404 1057 1058; 1405 1058 1059; 1406 1059 1060; 1407 1060 1061 1061 1062; 1409 1062 1063; 1410 1063 1064; 1411 1064 1065; 1412 1065 1066 1066 1067; 1414 1067 1068; 1415 944 969; 1416 969 973; 1417 973 977 977 981; 1419 981 985; 1420 1024 1028; 1421 1028 1032; 1422 1032 1036 1036 1040; 1424 1040 1044; 1425 952 970; 1426 970 974; 1427 974 978 978 982; 1429 982 986; 1430 986 989; 1431 989 992; 1432 992 1002 1002 1019; 1434 1019 1021; 1435 1021 1025; 1436 1025 1029; 1437 1029 1033 1033 1037; 1439 1037 1041; 1440 1041 1052; 1441 960 971; 1442 971 975 975 979; 1444 979 983; 1445 983 987; 1446 987 990; 1447 990 993 993 1010; 1449 1010 1020; 1450 1020 1022; 1451 1022 1026; 1452 1026 1030 1030 1034; 1454 1034 1038; 1455 1038 1042; 1456 1042 1060; 1457 968 972 972 976; 1459 976 980; 1460 980 984; 1461 984 988; 1462 988 991 1023 1027; 1464 1027 1031; 1465 1031 1035; 1466 1035 1039; 1467 1039 1043 1043 1068; 1469 1069 1070; 1470 1070 1071; 1471 1071 1072; 1472 1072 1073 1073 1074; 1474 1074 1075; 1475 1075 1076; 1476 1076 1077; 1477 1077 1078 1078 1079; 1479 1079 1080; 1480 1080 1081; 1481 1081 1082; 1482 1082 1083 1083 1084; 1484 1084 1085; 1485 1085 1086; 1486 1086 1087; 1487 1087 1088 1088 1089; 1489 1089 1090; 1490 1090 1091; 1491 1091 1092; 1492 1092 1093 1119 1120; 1494 1120 1121; 1495 1121 1122; 1496 1122 1123; 1497 1123 1124 1124 1125; 1499 1125 1126; 1500 1126 1127; 1501 1127 1128; 1502 1128 1129 1129 1130; 1504 1130 1131; 1505 1131 1132; 1506 1132 1133; 1507 1133 1134 1134 1135; 1509 1135 1136; 1510 1136 1137; 1511 1137 1138; 1512 1138 1139 1139 1140; 1514 1140 1141; 1515 1141 1142; 1516 1142 1143; 1517 1169 1170 1170 1171; 1519 1171 1172; 1520 1172 1173; 1521 1173 1174; 1522 1174 1175 1175 1176; 1524 1176 1177; 1525 1177 1178; 1526 1178 1179; 1527 1179 1180 1180 1181; 1529 1181 1182; 1530 1182 1183; 1531 1183 1184; 1532 1184 1185 1185 1186; 1534 1186 1187; 1535 1187 1188; 1536 1188 1189; 1537 1189 1190 1190 1191; 1539 1191 1192; 1540 1192 1193; 1541 1069 1094; 1542 1094 1098 1098 1102; 1544 1102 1106; 1545 1106 1110; 1546 1149 1153; 1547 1153 1157 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 11 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 602. 603. 604. 605. 606. 607. 608. 609. 610. 611. 612. 613. 614. 615. 616. 617. 618. 619. 620. 621. 622. 623. 624. 625. 626. 627. 628. 629. 630. 631. 632. 633. 634. 635. 636. 637. 638. 639. 640. 641. 642. 643. 644. 645. 646. 647. 648. 649. 650. 651. 652. 653. 654. 655. 656. 657. 1548 1553 1558 1563 1568 1573 1578 1583 1588 1593 1598 1603 1608 1613 1618 1623 1628 1633 1638 1643 1648 1653 1658 1663 1668 1673 1678 1683 1688 1693 1698 1703 1708 1713 1718 1723 1728 1733 1738 1743 1748 1753 1758 1763 1768 1773 1778 1783 1788 1793 1798 1803 1808 1813 1818 1823 -- PAGE NO. 12 1157 1161; 1549 1161 1165; 1550 1165 1169; 1551 1077 1095; 1552 1095 1099 1103; 1554 1103 1107; 1555 1107 1111; 1556 1111 1114; 1557 1114 1117 1127; 1559 1127 1144; 1560 1144 1146; 1561 1146 1150; 1562 1150 1154 1158; 1564 1158 1162; 1565 1162 1166; 1566 1166 1177; 1567 1085 1096 1100; 1569 1100 1104; 1570 1104 1108; 1571 1108 1112; 1572 1112 1115 1118; 1574 1118 1135; 1575 1135 1145; 1576 1145 1147; 1577 1147 1151 1155; 1579 1155 1159; 1580 1159 1163; 1581 1163 1167; 1582 1167 1093 1097; 1584 1097 1101; 1585 1101 1105; 1586 1105 1109; 1587 1109 1113 1116; 1589 1148 1152; 1590 1152 1156; 1591 1156 1160; 1592 1160 1164 1168; 1594 1168 1193; 1595 1 426; 1596 426 557; 1597 557 688 688 819; 1599 819 944; 1600 944 1069; 1601 2 427; 1602 427 558 558 689; 1604 689 820; 1605 820 945; 1606 945 1070; 1607 3 428 428 559; 1609 559 690; 1610 690 821; 1611 821 946; 1612 946 1071 4 429; 1614 429 560; 1615 560 691; 1616 691 822; 1617 822 947 947 1072; 1619 5 430; 1620 430 561; 1621 561 692; 1622 692 823 823 948; 1624 948 1073; 1625 6 431; 1626 431 562; 1627 562 693 693 824; 1629 824 949; 1630 949 1074; 1631 7 432; 1632 432 563 563 694; 1634 694 825; 1635 825 950; 1636 950 1075; 1637 8 433 433 564; 1639 564 695; 1640 695 826; 1641 826 951; 1642 951 1076 9 434; 1644 434 565; 1645 565 696; 1646 696 827; 1647 827 952 952 1077; 1649 10 435; 1650 435 566; 1651 566 697; 1652 697 828 828 953; 1654 953 1078; 1655 11 436; 1656 436 567; 1657 567 698 698 829; 1659 829 954; 1660 954 1079; 1661 12 437; 1662 437 568 568 699; 1664 699 830; 1665 830 955; 1666 955 1080; 1667 13 438 438 569; 1669 569 700; 1670 700 831; 1671 831 956; 1672 956 1081 14 439; 1674 439 570; 1675 570 701; 1676 701 832; 1677 832 957 957 1082; 1679 15 440; 1680 440 571; 1681 571 702; 1682 702 833 833 958; 1684 958 1083; 1685 16 441; 1686 441 572; 1687 572 703 703 834; 1689 834 959; 1690 959 1084; 1691 17 442; 1692 442 573 573 704; 1694 704 835; 1695 835 960; 1696 960 1085; 1697 18 443 443 574; 1699 574 705; 1700 705 836; 1701 836 961; 1702 961 1086 19 444; 1704 444 575; 1705 575 706; 1706 706 837; 1707 837 962 962 1087; 1709 20 445; 1710 445 576; 1711 576 707; 1712 707 838 838 963; 1714 963 1088; 1715 21 446; 1716 446 577; 1717 577 708 708 839; 1719 839 964; 1720 964 1089; 1721 22 447; 1722 447 578 578 709; 1724 709 840; 1725 840 965; 1726 965 1090; 1727 23 448 448 579; 1729 579 710; 1730 710 841; 1731 841 966; 1732 966 1091 24 449; 1734 449 580; 1735 580 711; 1736 711 842; 1737 842 967 967 1092; 1739 25 450; 1740 450 581; 1741 581 712; 1742 712 843 843 968; 1744 968 1093; 1745 26 451; 1746 451 582; 1747 582 713 713 844; 1749 844 969; 1750 969 1094; 1751 34 452; 1752 452 583 583 714; 1754 714 845; 1755 845 970; 1756 970 1095; 1757 42 453 453 584; 1759 584 715; 1760 715 846; 1761 846 971; 1762 971 1096 50 454; 1764 454 585; 1765 585 716; 1766 716 847; 1767 847 972 972 1097; 1769 51 455; 1770 455 586; 1771 586 717; 1772 717 848 848 973; 1774 973 1098; 1775 59 456; 1776 456 587; 1777 587 718 718 849; 1779 849 974; 1780 974 1099; 1781 67 457; 1782 457 588 588 719; 1784 719 850; 1785 850 975; 1786 975 1100; 1787 75 458 458 589; 1789 589 720; 1790 720 851; 1791 851 976; 1792 976 1101 76 459; 1794 459 590; 1795 590 721; 1796 721 852; 1797 852 977 977 1102; 1799 84 460; 1800 460 591; 1801 591 722; 1802 722 853 853 978; 1804 978 1103; 1805 92 461; 1806 461 592; 1807 592 723 723 854; 1809 854 979; 1810 979 1104; 1811 100 462; 1812 462 593 593 724; 1814 724 855; 1815 855 980; 1816 980 1105; 1817 101 463 463 594; 1819 594 725; 1820 725 856; 1821 856 981; 1822 981 1106 109 464; 1824 464 595; 1825 595 726; 1826 726 857; 1827 857 982 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 1099 1117 1154 1096 1115 1151 1185 1113 1164 Page 12 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 658. 659. 660. 661. 662. 663. 664. 665. 666. 667. 668. 669. 670. 671. 672. 673. 674. 675. 676. 677. 678. 679. 680. 681. 682. 683. 684. 685. 686. 687. 688. 689. 690. 691. 692. 693. 694. 695. 696. 697. 698. 699. 700. 701. 702. 703. 704. 705. 706. 707. 708. 709. 710. 711. 712. 713. 1828 1833 1838 1843 1848 1853 1858 1863 1868 1873 1878 1883 1888 1893 1898 1903 1908 1913 1918 1923 1928 1933 1938 1943 1948 1953 1958 1963 1968 1973 1978 1983 1988 1993 1998 2003 2008 2013 2018 2023 2028 2033 2038 2043 2048 2053 2058 2063 2068 2073 2078 2083 2088 2093 2098 2103 -- PAGE NO. 13 982 1107; 1829 117 465; 1830 465 596; 1831 596 727; 1832 727 858 858 983; 1834 983 1108; 1835 125 466; 1836 466 597; 1837 597 728 728 859; 1839 859 984; 1840 984 1109; 1841 126 467; 1842 467 598 598 729; 1844 729 860; 1845 860 985; 1846 985 1110; 1847 134 468 468 599; 1849 599 730; 1850 730 861; 1851 861 986; 1852 986 1111 142 469; 1854 469 600; 1855 600 731; 1856 731 862; 1857 862 987 987 1112; 1859 150 470; 1860 470 601; 1861 601 732; 1862 732 863 863 988; 1864 988 1113; 1865 151 471; 1866 471 602; 1867 602 733 159 472; 1869 472 603; 1870 603 734; 1871 734 864; 1872 864 989 989 1114; 1874 167 473; 1875 473 604; 1876 604 735; 1877 735 865 865 990; 1879 990 1115; 1880 175 474; 1881 474 605; 1882 605 736 736 866; 1884 866 991; 1885 991 1116; 1886 176 475; 1887 475 606 606 737; 1889 184 476; 1890 476 607; 1891 607 738; 1892 738 867 867 992; 1894 992 1117; 1895 192 477; 1896 477 608; 1897 608 739 739 868; 1899 868 993; 1900 993 1118; 1901 200 478; 1902 478 609 609 740; 1904 201 479; 1905 479 610; 1906 610 741; 1907 741 869 869 994; 1909 994 1119; 1910 202 480; 1911 480 611; 1912 611 742 742 870; 1914 870 995; 1915 995 1120; 1916 203 481; 1917 481 612 612 743; 1919 743 871; 1920 871 996; 1921 996 1121; 1922 204 482 482 613; 1924 613 744; 1925 744 872; 1926 872 997; 1927 997 1122 205 483; 1929 483 614; 1930 614 745; 1931 745 873; 1932 873 998 998 1123; 1934 206 484; 1935 484 615; 1936 615 746; 1937 746 874 874 999; 1939 999 1124; 1940 207 485; 1941 485 616; 1942 616 747 747 875; 1944 875 1000; 1945 1000 1125; 1946 208 486; 1947 486 617 617 748; 1949 748 876; 1950 876 1001; 1951 1001 1126; 1952 209 487 487 618; 1954 618 749; 1955 749 877; 1956 877 1002; 1957 1002 1127 210 488; 1959 488 619; 1960 619 750; 1961 750 878; 1962 878 1003 1003 1128; 1964 211 489; 1965 489 620; 1966 620 751; 1967 751 879 879 1004; 1969 1004 1129; 1970 212 490; 1971 490 621; 1972 621 752 752 880; 1974 880 1005; 1975 1005 1130; 1976 213 491; 1977 491 622 622 753; 1979 753 881; 1980 881 1006; 1981 1006 1131; 1982 214 492 492 623; 1984 623 754; 1985 754 882; 1986 882 1007; 1987 1007 1132 215 493; 1989 493 624; 1990 624 755; 1991 755 883; 1992 883 1008 1008 1133; 1994 216 494; 1995 494 625; 1996 625 756; 1997 756 884 884 1009; 1999 1009 1134; 2000 217 495; 2001 495 626; 2002 626 757 757 885; 2004 885 1010; 2005 1010 1135; 2006 218 496; 2007 496 627 627 758; 2009 758 886; 2010 886 1011; 2011 1011 1136; 2012 219 497 497 628; 2014 628 759; 2015 759 887; 2016 887 1012; 2017 1012 1137 220 498; 2019 498 629; 2020 629 760; 2021 760 888; 2022 888 1013 1013 1138; 2024 221 499; 2025 499 630; 2026 630 761; 2027 761 889 889 1014; 2029 1014 1139; 2030 222 500; 2031 500 631; 2032 631 762 762 890; 2034 890 1015; 2035 1015 1140; 2036 223 501; 2037 501 632 632 763; 2039 763 891; 2040 891 1016; 2041 1016 1141; 2042 224 502 502 633; 2044 633 764; 2045 764 892; 2046 892 1017; 2047 1017 1142 225 503; 2049 503 634; 2050 634 765; 2051 765 893; 2052 893 1018 1018 1143; 2054 226 504; 2055 504 635; 2056 635 766; 2057 234 505 505 636; 2059 636 767; 2060 767 894; 2061 894 1019; 2062 1019 1144 242 506; 2064 506 637; 2065 637 768; 2066 768 895; 2067 895 1020 1020 1145; 2069 250 507; 2070 507 638; 2071 638 769; 2072 251 508 508 639; 2074 639 770; 2075 259 509; 2076 509 640; 2077 640 771 771 896; 2079 896 1021; 2080 1021 1146; 2081 267 510; 2082 510 641 641 772; 2084 772 897; 2085 897 1022; 2086 1022 1147; 2087 275 511 511 642; 2089 642 773; 2090 773 898; 2091 898 1023; 2092 1023 1148 276 512; 2094 512 643; 2095 643 774; 2096 774 899; 2097 899 1024 1024 1149; 2099 284 513; 2100 513 644; 2101 644 775; 2102 775 900 900 1025; 2104 1025 1150; 2105 292 514; 2106 514 645; 2107 645 776 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 13 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 714. 715. 716. 717. 718. 719. 720. 721. 722. 723. 724. 725. 726. 727. 728. 729. 730. 731. 732. 733. 734. 735. 736. 737. 738. 739. 740. 741. 742. 743. 744. 745. 746. 747. 748. 749. 750. 751. 752. 753. 754. 755. 756. 757. 758. 759. 760. 761. 762. 763. 764. 765. 766. 767. 768. 769. 2108 2113 2118 2123 2128 2133 2138 2143 2148 2153 2158 2163 2168 2173 2178 2183 2188 2193 2198 2203 2208 2213 2218 2223 2228 2233 2238 2243 2248 2253 2258 2263 2268 2273 2278 2283 2288 2293 2298 2303 2308 2313 2318 2323 2328 2333 2338 2343 2348 2353 2358 2363 2368 2373 2378 2383 -- PAGE NO. 14 776 901; 2109 901 1026; 2110 1026 1151; 2111 300 515; 2112 515 646 646 777; 2114 777 902; 2115 902 1027; 2116 1027 1152; 2117 301 516 516 647; 2119 647 778; 2120 778 903; 2121 903 1028; 2122 1028 1153 309 517; 2124 517 648; 2125 648 779; 2126 779 904; 2127 904 1029 1029 1154; 2129 317 518; 2130 518 649; 2131 649 780; 2132 780 905 905 1030; 2134 1030 1155; 2135 325 519; 2136 519 650; 2137 650 781 781 906; 2139 906 1031; 2140 1031 1156; 2141 326 520; 2142 520 651 651 782; 2144 782 907; 2145 907 1032; 2146 1032 1157; 2147 334 521 521 652; 2149 652 783; 2150 783 908; 2151 908 1033; 2152 1033 1158 342 522; 2154 522 653; 2155 653 784; 2156 784 909; 2157 909 1034 1034 1159; 2159 350 523; 2160 523 654; 2161 654 785; 2162 785 910 910 1035; 2164 1035 1160; 2165 351 524; 2166 524 655; 2167 655 786 786 911; 2169 911 1036; 2170 1036 1161; 2171 359 525; 2172 525 656 656 787; 2174 787 912; 2175 912 1037; 2176 1037 1162; 2177 367 526 526 657; 2179 657 788; 2180 788 913; 2181 913 1038; 2182 1038 1163 375 527; 2184 527 658; 2185 658 789; 2186 789 914; 2187 914 1039 1039 1164; 2189 376 528; 2190 528 659; 2191 659 790; 2192 790 915 915 1040; 2194 1040 1165; 2195 384 529; 2196 529 660; 2197 660 791 791 916; 2199 916 1041; 2200 1041 1166; 2201 392 530; 2202 530 661 661 792; 2204 792 917; 2205 917 1042; 2206 1042 1167; 2207 400 531 531 662; 2209 662 793; 2210 793 918; 2211 918 1043; 2212 1043 1168 401 532; 2214 532 663; 2215 663 794; 2216 794 919; 2217 919 1044 1044 1169; 2219 402 533; 2220 533 664; 2221 664 795; 2222 795 920 920 1045; 2224 1045 1170; 2225 403 534; 2226 534 665; 2227 665 796 796 921; 2229 921 1046; 2230 1046 1171; 2231 404 535; 2232 535 666 666 797; 2234 797 922; 2235 922 1047; 2236 1047 1172; 2237 405 536 536 667; 2239 667 798; 2240 798 923; 2241 923 1048; 2242 1048 1173 406 537; 2244 537 668; 2245 668 799; 2246 799 924; 2247 924 1049 1049 1174; 2249 407 538; 2250 538 669; 2251 669 800; 2252 800 925 925 1050; 2254 1050 1175; 2255 408 539; 2256 539 670; 2257 670 801 801 926; 2259 926 1051; 2260 1051 1176; 2261 409 540; 2262 540 671 671 802; 2264 802 927; 2265 927 1052; 2266 1052 1177; 2267 410 541 541 672; 2269 672 803; 2270 803 928; 2271 928 1053; 2272 1053 1178 411 542; 2274 542 673; 2275 673 804; 2276 804 929; 2277 929 1054 1054 1179; 2279 412 543; 2280 543 674; 2281 674 805; 2282 805 930 930 1055; 2284 1055 1180; 2285 413 544; 2286 544 675; 2287 675 806 806 931; 2289 931 1056; 2290 1056 1181; 2291 414 545; 2292 545 676 676 807; 2294 807 932; 2295 932 1057; 2296 1057 1182; 2297 415 546 546 677; 2299 677 808; 2300 808 933; 2301 933 1058; 2302 1058 1183 416 547; 2304 547 678; 2305 678 809; 2306 809 934; 2307 934 1059 1059 1184; 2309 417 548; 2310 548 679; 2311 679 810; 2312 810 935 935 1060; 2314 1060 1185; 2315 418 549; 2316 549 680; 2317 680 811 811 936; 2319 936 1061; 2320 1061 1186; 2321 419 550; 2322 550 681 681 812; 2324 812 937; 2325 937 1062; 2326 1062 1187; 2327 420 551 551 682; 2329 682 813; 2330 813 938; 2331 938 1063; 2332 1063 1188 421 552; 2334 552 683; 2335 683 814; 2336 814 939; 2337 939 1064 1064 1189; 2339 422 553; 2340 553 684; 2341 684 815; 2342 815 940 940 1065; 2344 1065 1190; 2345 423 554; 2346 554 685; 2347 685 816 816 941; 2349 941 1066; 2350 1066 1191; 2351 424 555; 2352 555 686 686 817; 2354 817 942; 2355 942 1067; 2356 1067 1192; 2357 425 556 556 687; 2359 687 818; 2360 818 943; 2361 943 1068; 2362 1068 1193 1194 1195; 2364 1195 1196; 2365 1196 1197; 2366 1197 1198; 2367 1198 1199 1200; 2369 1201 1202; 2370 1202 1203; 2371 1203 1204; 2372 1204 1205 1206; 2374 1206 1207; 2375 1208 1209; 2376 1209 1210; 2377 1210 1211 1212; 2379 1212 1213; 2380 1213 1214; 2381 1215 1216; 2382 1216 1217 1218; 2384 1218 1219; 2385 1219 1220; 2386 1220 1221; 2387 1194 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 1199 1205 1211 1217 1201 Page 14 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 770. 771. 772. 773. 774. 775. 776. 777. 778. 779. 780. 781. 782. 783. 784. 785. 786. 787. 788. 789. 790. 791. 792. 793. 794. 795. 796. 797. 798. 799. 800. 801. 802. 803. 804. 805. 806. 807. 808. 809. 810. 811. 812. 813. 814. 815. 816. 817. 818. 819. 820. 821. 822. 823. 824. 825. 2388 2393 2398 2403 2408 2413 2418 2423 2428 2433 2438 2443 2448 2453 2458 2463 2468 2473 2478 2483 2488 2493 2498 2503 2508 2513 2518 2523 2528 2533 2538 2543 2548 2553 2558 2563 2568 2573 2578 2583 2588 2593 2598 2603 2608 2613 2618 2623 2628 2633 2638 2643 2648 2653 2658 2663 -- PAGE NO. 15 1201 1208; 2389 1208 1215; 2390 1215 729; 2391 1195 1202; 2392 1202 1209 1209 1216; 2394 1216 733; 2395 1196 1203; 2396 1203 1210; 2397 1210 1217 1217 737; 2399 1197 1204; 2400 1204 1211; 2401 1211 1218; 2402 1218 741 1198 1205; 2404 1205 1212; 2405 1212 1219; 2406 1219 766; 2407 1199 1206 1206 1213; 2409 1213 1220; 2410 1220 770; 2411 1200 1207; 2412 1207 1214 1214 1221; 2414 1221 774; 2415 1222 1223; 2416 1223 1224; 2417 1224 1225 1225 1226; 2419 1226 1227; 2420 1227 1228; 2421 1231 1232; 2422 1232 1233 1233 1234; 2424 1234 1235; 2425 1235 1236; 2426 1236 1237; 2427 1222 1229 1229 1231; 2429 1231 1238; 2430 1238 860; 2431 1234 1239; 2432 1239 869 1228 1230; 2434 1230 1237; 2435 1237 1240; 2436 1240 899; 2437 1241 1242 1242 1243; 2439 1243 1244; 2440 1244 1245; 2441 1245 1246; 2442 1246 1247 1250 1251; 2444 1251 1252; 2445 1252 1253; 2446 1253 1254; 2447 1254 1255 1255 1256; 2449 1241 1248; 2450 1248 1250; 2451 1250 1257; 2452 1257 985 1253 1258; 2454 1258 994; 2455 1247 1249; 2456 1249 1256; 2457 1256 1259 1259 1024; 2459 1260 1261; 2460 1261 1262; 2461 1262 1263; 2462 1263 1264 1264 1265; 2464 1265 1266; 2465 1267 1268; 2466 1269 1270; 2467 1270 1271 1272 1273; 2469 1260 1274; 2470 1274 1267; 2471 1267 1275; 2472 1275 1110 1270 1276; 2474 1276 1119; 2475 1266 1277; 2476 1277 1273; 2477 1273 1278 1278 1149; 2479 1279 1194; 2480 1194 1222; 2481 1222 1241; 2482 1241 1260 1201 1229; 2484 1229 1248; 2485 1248 1274; 2486 1208 1231; 2487 1231 1250 1250 1267; 2489 1215 1238; 2490 1238 1257; 2491 1257 1275; 2492 1195 1223 1223 1242; 2494 1242 1261; 2495 1209 1232; 2496 1232 1251; 2497 1251 1268 1196 1224; 2499 1224 1243; 2500 1243 1262; 2501 1210 1233; 2502 1233 1252 1252 1269; 2504 1197 1225; 2505 1225 1244; 2506 1244 1263; 2507 1211 1234 1234 1253; 2509 1253 1270; 2510 1218 1239; 2511 1239 1258; 2512 1258 1276 1198 1226; 2514 1226 1245; 2515 1245 1264; 2516 1212 1235; 2517 1235 1254 1254 1271; 2519 1199 1227; 2520 1227 1246; 2521 1246 1265; 2522 1213 1236 1236 1255; 2524 1255 1272; 2525 1280 1200; 2526 1200 1228; 2527 1228 1247 1247 1266; 2529 1207 1230; 2530 1230 1249; 2531 1249 1277; 2532 1214 1237 1237 1256; 2534 1256 1273; 2535 1221 1240; 2536 1240 1259; 2537 1259 1278 1281 1282; 2539 1282 1283; 2540 1283 1284; 2541 1284 1285; 2542 1285 1286 1286 1287; 2544 1287 1288; 2545 1288 1289; 2546 1289 1290; 2547 1290 1291 1291 1292; 2549 1292 1293; 2550 1293 1294; 2551 1294 1295; 2552 1295 1296 1296 1297; 2554 1298 1299; 2555 1299 1300; 2556 1300 1301; 2557 1301 1302 1302 1303; 2559 1303 1304; 2560 1304 1305; 2561 1305 1306; 2562 1306 1307 1307 1308; 2564 1308 1309; 2565 1309 1310; 2566 1310 1311; 2567 1311 1312 1312 1313; 2569 1313 1314; 2570 1315 1316; 2571 1316 1317; 2572 1317 1318 1318 1319; 2574 1319 1320; 2575 1320 1321; 2576 1321 1322; 2577 1322 1323 1323 1324; 2579 1324 1325; 2580 1325 1326; 2581 1326 1327; 2582 1327 1328 1328 1329; 2584 1329 1330; 2585 1330 1331; 2586 1332 1333; 2587 1333 1334 1334 1335; 2589 1335 1336; 2590 1336 1337; 2591 1337 1338; 2592 1338 1339 1339 1340; 2594 1340 1341; 2595 1341 1342; 2596 1342 1343; 2597 1343 1344 1344 1345; 2599 1345 1346; 2600 1346 1347; 2601 1347 1348; 2602 1349 1350 1350 1351; 2604 1351 1352; 2605 1352 1353; 2606 1353 1354; 2607 1354 1355 1355 1356; 2609 1356 1357; 2610 1357 1358; 2611 1358 1359; 2612 1359 1360 1360 1361; 2614 1361 1362; 2615 1362 1363; 2616 1363 1364; 2617 1364 1365 712 1281; 2619 1281 1298; 2620 716 1282; 2621 1282 1299; 2622 720 1283 1283 1300; 2624 724 1284; 2625 1284 1301; 2626 728 1285; 2627 1285 1302 732 1286; 2629 1286 1303; 2630 736 1287; 2631 1287 1304; 2632 740 1288 1288 1305; 2634 765 1289; 2635 1289 1306; 2636 769 1290; 2637 1290 1307 773 1291; 2639 1291 1308; 2640 777 1292; 2641 1292 1309; 2642 781 1293 1293 1310; 2644 785 1294; 2645 1294 1311; 2646 789 1295; 2647 1295 1312 793 1296; 2649 1296 1313; 2650 818 1297; 2651 1297 1314; 2652 1298 1315 1315 1332; 2654 1332 1349; 2655 1299 1316; 2656 1316 1333; 2657 1333 1350 1300 1317; 2659 1317 1334; 2660 1334 1351; 2661 1301 1318; 2662 1318 1335 1335 1352; 2664 1302 1319; 2665 1319 1336; 2666 1336 1353; 2667 1303 1320 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 15 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 826. 827. 828. 829. 830. 831. 832. 833. 834. 835. 836. 837. 838. 839. 840. 841. 842. 843. 844. 845. 846. 847. 848. 849. 850. 851. 852. 853. 854. 855. 856. 857. 858. 859. 860. 861. 862. 863. 864. 865. 866. 867. 868. 869. 870. 871. 872. 873. 874. 875. 876. 877. 878. 879. 880. 881. -- PAGE NO. 16 2668 1320 1337; 2669 1337 1354; 2670 1304 1321; 2671 1321 1338; 2672 1338 1355 2673 1305 1322; 2674 1322 1339; 2675 1339 1356; 2676 1306 1323; 2677 1323 1340 2678 1340 1357; 2679 1307 1324; 2680 1324 1341; 2681 1341 1358; 2682 1308 1325 2683 1325 1342; 2684 1342 1359; 2685 1309 1326; 2686 1326 1343; 2687 1343 1360 2688 1310 1327; 2689 1327 1344; 2690 1344 1361; 2691 1311 1328; 2692 1328 1345 2693 1345 1362; 2694 1312 1329; 2695 1329 1346; 2696 1346 1363; 2697 1313 1330 2698 1330 1347; 2699 1347 1364; 2700 1314 1331; 2701 1331 1348; 2702 1348 1365 2703 1073 1366; 2704 1366 1123; 2705 1123 1367; 2706 1367 1173; 2707 1081 1368 2708 1368 1131; 2709 1131 1369; 2710 1369 1181; 2711 1089 1370; 2712 1370 1139 2713 1139 1371; 2714 1371 1189; 2715 1372 1298; 2716 1373 1314; 2717 1374 1306 ELEMENT INCIDENCES SHELL 2718 1 26 27 2; 2719 2 27 28 3; 2720 3 28 29 4; 2721 4 29 30 5; 2722 5 30 31 6 2723 6 31 32 7; 2724 7 32 33 8; 2725 8 33 34 9; 2726 9 34 35 10 2727 10 35 36 11; 2728 11 36 37 12; 2729 12 37 38 13; 2730 13 38 39 14 2731 14 39 40 15; 2732 15 40 41 16; 2733 16 41 42 17; 2734 17 42 43 18 2735 18 43 44 19; 2736 19 44 45 20; 2737 20 45 46 21; 2738 21 46 47 22 2739 22 47 48 23; 2740 23 48 49 24; 2741 24 49 50 25; 2742 26 51 52 27 2743 27 52 53 28; 2744 28 53 54 29; 2745 29 54 55 30; 2746 30 55 56 31 2747 31 56 57 32; 2748 32 57 58 33; 2749 33 58 59 34; 2750 34 59 60 35 2751 35 60 61 36; 2752 36 61 62 37; 2753 37 62 63 38; 2754 38 63 64 39 2755 39 64 65 40; 2756 40 65 66 41; 2757 41 66 67 42; 2758 42 67 68 43 2759 43 68 69 44; 2760 44 69 70 45; 2761 45 70 71 46; 2762 46 71 72 47 2763 47 72 73 48; 2764 48 73 74 49; 2765 49 74 75 50; 2766 51 76 77 52 2767 52 77 78 53; 2768 53 78 79 54; 2769 54 79 80 55; 2770 55 80 81 56 2771 56 81 82 57; 2772 57 82 83 58; 2773 58 83 84 59; 2774 59 84 85 60 2775 60 85 86 61; 2776 61 86 87 62; 2777 62 87 88 63; 2778 63 88 89 64 2779 64 89 90 65; 2780 65 90 91 66; 2781 66 91 92 67; 2782 67 92 93 68 2783 68 93 94 69; 2784 69 94 95 70; 2785 70 95 96 71; 2786 71 96 97 72 2787 72 97 98 73; 2788 73 98 99 74; 2789 74 99 100 75; 2790 76 101 102 77 2791 77 102 103 78; 2792 78 103 104 79; 2793 79 104 105 80; 2794 80 105 106 81 2795 81 106 107 82; 2796 82 107 108 83; 2797 83 108 109 84; 2798 84 109 110 85 2799 85 110 111 86; 2800 86 111 112 87; 2801 87 112 113 88; 2802 88 113 114 89 2803 89 114 115 90; 2804 90 115 116 91; 2805 91 116 117 92; 2806 92 117 118 93 2807 93 118 119 94; 2808 94 119 120 95; 2809 95 120 121 96; 2810 96 121 122 97 2811 97 122 123 98; 2812 98 123 124 99; 2813 99 124 125 100 2814 101 126 127 102; 2815 102 127 128 103; 2816 103 128 129 104 2817 104 129 130 105; 2818 105 130 131 106; 2819 106 131 132 107 2820 107 132 133 108; 2821 108 133 134 109; 2822 109 134 135 110 2823 110 135 136 111; 2824 111 136 137 112; 2825 112 137 138 113 2826 113 138 139 114; 2827 114 139 140 115; 2828 115 140 141 116 2829 116 141 142 117; 2830 117 142 143 118; 2831 118 143 144 119 2832 119 144 145 120; 2833 120 145 146 121; 2834 121 146 147 122 2835 122 147 148 123; 2836 123 148 149 124; 2837 124 149 150 125 2838 126 151 152 127; 2839 127 152 153 128; 2840 128 153 154 129 2841 129 154 155 130; 2842 130 155 156 131; 2843 131 156 157 132 2844 132 157 158 133; 2845 133 158 159 134; 2846 134 159 160 135 2847 135 160 161 136; 2848 136 161 162 137; 2849 137 162 163 138 2850 138 163 164 139; 2851 139 164 165 140; 2852 140 165 166 141 2853 141 166 167 142; 2854 142 167 168 143; 2855 143 168 169 144 2856 144 169 170 145; 2857 145 170 171 146; 2858 146 171 172 147 2859 147 172 173 148; 2860 148 173 174 149; 2861 149 174 175 150 2862 151 176 177 152; 2863 152 177 178 153; 2864 153 178 179 154 2865 154 179 180 155; 2866 155 180 181 156; 2867 156 181 182 157 2868 157 182 183 158; 2869 158 183 184 159; 2870 159 184 185 160 2871 160 185 186 161; 2872 161 186 187 162; 2873 162 187 188 163 2874 163 188 189 164; 2875 164 189 190 165; 2876 165 190 191 166 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 16 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 882. 883. 884. 885. 886. 887. 888. 889. 890. 891. 892. 893. 894. 895. 896. 897. 898. 899. 900. 901. 902. 903. 904. 905. 906. 907. 908. 909. 910. 911. 912. 913. 914. 915. 916. 917. 918. 919. 920. 921. 922. 923. 924. 925. 926. 927. 928. 929. 930. 931. 932. 933. 934. 935. 936. 937. 2877 2880 2883 2886 2889 2892 2895 2898 2901 2904 2907 2910 2913 2916 2919 2922 2925 2928 2931 2934 2937 2940 2943 2946 2949 2952 2955 2958 2961 2964 2967 2970 2973 2976 2979 2982 2985 2988 2991 2994 2997 3000 3003 3006 3009 3012 3015 3018 3021 3024 3027 3030 3033 3036 3039 3042 166 169 172 176 179 182 185 188 191 194 197 201 204 207 210 213 216 219 222 226 229 232 235 238 241 244 247 251 254 257 260 263 266 269 272 276 279 282 285 288 291 294 297 301 304 307 310 313 316 319 322 326 329 332 335 338 -- PAGE NO. 191 194 197 201 204 207 210 213 216 219 222 226 229 232 235 238 241 244 247 251 254 257 260 263 266 269 272 276 279 282 285 288 291 294 297 301 304 307 310 313 316 319 322 326 329 332 335 338 341 344 347 351 354 357 360 363 192 195 198 202 205 208 211 214 217 220 223 227 230 233 236 239 242 245 248 252 255 258 261 264 267 270 273 277 280 283 286 289 292 295 298 302 305 308 311 314 317 320 323 327 330 333 336 339 342 345 348 352 355 358 361 364 167; 170; 173; 177; 180; 183; 186; 189; 192; 195; 198; 202; 205; 208; 211; 214; 217; 220; 223; 227; 230; 233; 236; 239; 242; 245; 248; 252; 255; 258; 261; 264; 267; 270; 273; 277; 280; 283; 286; 289; 292; 295; 298; 302; 305; 308; 311; 314; 317; 320; 323; 327; 330; 333; 336; 339; 2878 2881 2884 2887 2890 2893 2896 2899 2902 2905 2908 2911 2914 2917 2920 2923 2926 2929 2932 2935 2938 2941 2944 2947 2950 2953 2956 2959 2962 2965 2968 2971 2974 2977 2980 2983 2986 2989 2992 2995 2998 3001 3004 3007 3010 3013 3016 3019 3022 3025 3028 3031 3034 3037 3040 3043 167 170 173 177 180 183 186 189 192 195 198 202 205 208 211 214 217 220 223 227 230 233 236 239 242 245 248 252 255 258 261 264 267 270 273 277 280 283 286 289 292 295 298 302 305 308 311 314 317 320 323 327 330 333 336 339 192 195 198 202 205 208 211 214 217 220 223 227 230 233 236 239 242 245 248 252 255 258 261 264 267 270 273 277 280 283 286 289 292 295 298 302 305 308 311 314 317 320 323 327 330 333 336 339 342 345 348 352 355 358 361 364 193 196 199 203 206 209 212 215 218 221 224 228 231 234 237 240 243 246 249 253 256 259 262 265 268 271 274 278 281 284 287 290 293 296 299 303 306 309 312 315 318 321 324 328 331 334 337 340 343 346 349 353 356 359 362 365 168; 171; 174; 178; 181; 184; 187; 190; 193; 196; 199; 203; 206; 209; 212; 215; 218; 221; 224; 228; 231; 234; 237; 240; 243; 246; 249; 253; 256; 259; 262; 265; 268; 271; 274; 278; 281; 284; 287; 290; 293; 296; 299; 303; 306; 309; 312; 315; 318; 321; 324; 328; 331; 334; 337; 340; C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 2879 2882 2885 2888 2891 2894 2897 2900 2903 2906 2909 2912 2915 2918 2921 2924 2927 2930 2933 2936 2939 2942 2945 2948 2951 2954 2957 2960 2963 2966 2969 2972 2975 2978 2981 2984 2987 2990 2993 2996 2999 3002 3005 3008 3011 3014 3017 3020 3023 3026 3029 3032 3035 3038 3041 3044 168 171 174 178 181 184 187 190 193 196 199 203 206 209 212 215 218 221 224 228 231 234 237 240 243 246 249 253 256 259 262 265 268 271 274 278 281 284 287 290 293 296 299 303 306 309 312 315 318 321 324 328 331 334 337 340 193 196 199 203 206 209 212 215 218 221 224 228 231 234 237 240 243 246 249 253 256 259 262 265 268 271 274 278 281 284 287 290 293 296 299 303 306 309 312 315 318 321 324 328 331 334 337 340 343 346 349 353 356 359 362 365 194 197 200 204 207 210 213 216 219 222 225 229 232 235 238 241 244 247 250 254 257 260 263 266 269 272 275 279 282 285 288 291 294 297 300 304 307 310 313 316 319 322 325 329 332 335 338 341 344 347 350 354 357 360 363 366 17 169 172 175 179 182 185 188 191 194 197 200 204 207 210 213 216 219 222 225 229 232 235 238 241 244 247 250 254 257 260 263 266 269 272 275 279 282 285 288 291 294 297 300 304 307 310 313 316 319 322 325 329 332 335 338 341 Page 17 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 938. 939. 940. 941. 942. 943. 944. 945. 946. 947. 948. 949. 950. 951. 952. 953. 954. 955. 956. 957. 958. 959. 960. 961. 962. 963. 964. 965. 966. 967. 968. 969. 970. 971. 972. 973. 974. 975. 976. 977. 978. 979. 980. 981. 982. 983. 984. 985. 986. 987. 988. 989. 990. 991. 992. 993. 3045 3048 3051 3054 3057 3060 3063 3066 3069 3072 3075 3078 3081 3084 3087 3090 3093 3096 3099 3102 3105 3108 3111 3114 3117 3120 3123 3126 3129 3132 3135 3138 3141 3144 3147 3150 3153 3156 3159 3163 3167 3171 3175 3179 3182 3185 3188 3191 3194 3197 3200 3203 3206 3209 3212 3215 -- PAGE NO. 18 341 366 367 342; 3046 342 367 368 343; 3047 343 368 369 344 344 369 370 345; 3049 345 370 371 346; 3050 346 371 372 347 347 372 373 348; 3052 348 373 374 349; 3053 349 374 375 350 351 376 377 352; 3055 352 377 378 353; 3056 353 378 379 354 354 379 380 355; 3058 355 380 381 356; 3059 356 381 382 357 357 382 383 358; 3061 358 383 384 359; 3062 359 384 385 360 360 385 386 361; 3064 361 386 387 362; 3065 362 387 388 363 363 388 389 364; 3067 364 389 390 365; 3068 365 390 391 366 366 391 392 367; 3070 367 392 393 368; 3071 368 393 394 369 369 394 395 370; 3073 370 395 396 371; 3074 371 396 397 372 372 397 398 373; 3076 373 398 399 374; 3077 374 399 400 375 376 401 402 377; 3079 377 402 403 378; 3080 378 403 404 379 379 404 405 380; 3082 380 405 406 381; 3083 381 406 407 382 382 407 408 383; 3085 383 408 409 384; 3086 384 409 410 385 385 410 411 386; 3088 386 411 412 387; 3089 387 412 413 388 388 413 414 389; 3091 389 414 415 390; 3092 390 415 416 391 391 416 417 392; 3094 392 417 418 393; 3095 393 418 419 394 394 419 420 395; 3097 395 420 421 396; 3098 396 421 422 397 397 422 423 398; 3100 398 423 424 399; 3101 399 424 425 400 712 716 1282 1281; 3103 1281 1282 1299 1298; 3104 716 720 1283 1282 1282 1283 1300 1299; 3106 720 724 1284 1283; 3107 1283 1284 1301 1300 724 728 1285 1284; 3109 1284 1285 1302 1301; 3110 728 732 1286 1285 1285 1286 1303 1302; 3112 732 736 1287 1286; 3113 1286 1287 1304 1303 736 740 1288 1287; 3115 1287 1288 1305 1304; 3116 740 765 1289 1288 1288 1289 1306 1305; 3118 765 769 1290 1289; 3119 1289 1290 1307 1306 769 773 1291 1290; 3121 1290 1291 1308 1307; 3122 773 777 1292 1291 1291 1292 1309 1308; 3124 777 781 1293 1292; 3125 1292 1293 1310 1309 781 785 1294 1293; 3127 1293 1294 1311 1310; 3128 785 789 1295 1294 1294 1295 1312 1311; 3130 789 793 1296 1295; 3131 1295 1296 1313 1312 793 818 1297 1296; 3133 1296 1297 1314 1313; 3134 1194 1195 1202 1201 1201 1202 1209 1208; 3136 1208 1209 1216 1215; 3137 1215 1216 733 729 1195 1196 1203 1202; 3139 1202 1203 1210 1209; 3140 1209 1210 1217 1216 1216 1217 737 733; 3142 1196 1197 1204 1203; 3143 1203 1204 1211 1210 1210 1211 1218 1217; 3145 1217 1218 741 737; 3146 1197 1198 1205 1204 1204 1205 1212 1211; 3148 1211 1212 1219 1218; 3149 1218 1219 766 741 1198 1199 1206 1205; 3151 1205 1206 1213 1212; 3152 1212 1213 1220 1219 1219 1220 770 766; 3154 1199 1200 1207 1206; 3155 1206 1207 1214 1213 1213 1214 1221 1220; 3157 1220 1221 774 770; 3158 1 2 427 426 2 3 428 427; 3160 3 4 429 428; 3161 4 5 430 429; 3162 5 6 431 430 6 7 432 431; 3164 7 8 433 432; 3165 8 9 434 433; 3166 9 10 435 434 10 11 436 435; 3168 11 12 437 436; 3169 12 13 438 437; 3170 13 14 439 438 14 15 440 439; 3172 15 16 441 440; 3173 16 17 442 441; 3174 17 18 443 442 18 19 444 443; 3176 19 20 445 444; 3177 20 21 446 445; 3178 21 22 447 446 22 23 448 447; 3180 23 24 449 448; 3181 24 25 450 449 426 427 558 557; 3183 427 428 559 558; 3184 428 429 560 559 429 430 561 560; 3186 430 431 562 561; 3187 431 432 563 562 432 433 564 563; 3189 433 434 565 564; 3190 434 435 566 565 435 436 567 566; 3192 436 437 568 567; 3193 437 438 569 568 438 439 570 569; 3195 439 440 571 570; 3196 440 441 572 571 441 442 573 572; 3198 442 443 574 573; 3199 443 444 575 574 444 445 576 575; 3201 445 446 577 576; 3202 446 447 578 577 447 448 579 578; 3204 448 449 580 579; 3205 449 450 581 580 557 558 689 688; 3207 558 559 690 689; 3208 559 560 691 690 560 561 692 691; 3210 561 562 693 692; 3211 562 563 694 693 563 564 695 694; 3213 564 565 696 695; 3214 565 566 697 696 566 567 698 697; 3216 567 568 699 698; 3217 568 569 700 699 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 18 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 994. 995. 996. 997. 998. 999. 1000. 1001. 1002. 1003. 1004. 1005. 1006. 1007. 1008. 1009. 1010. 1011. 1012. 1013. 1014. 1015. 1016. 1017. 1018. 1019. 1020. 1021. 1022. 1023. 1024. 1025. 1026. 1027. 1028. 1029. 1030. 1031. 1032. 1033. 1034. 1035. 1036. 1037. 1038. 1039. 1040. 1041. 1042. 1043. 1044. 1045. 1046. 1047. 1048. 1049. 3218 3221 3224 3227 3230 3233 3236 3239 3242 3245 3248 3251 3254 3257 3260 3263 3266 3269 3272 3275 3278 3281 3284 3287 3290 3293 3296 3299 3302 3305 3308 3311 3314 3317 3320 3323 3326 3329 3332 3335 3338 3341 3344 3347 3350 3353 3356 3359 3362 3365 3368 3371 3374 3377 3380 3383 569 572 575 578 688 691 694 697 700 703 706 709 819 822 825 828 831 834 837 840 944 947 950 953 956 959 962 965 201 204 207 210 213 216 219 222 479 482 485 488 491 494 497 500 610 613 616 619 622 625 628 631 741 744 747 750 -- PAGE NO. 570 573 576 579 689 692 695 698 701 704 707 710 820 823 826 829 832 835 838 841 945 948 951 954 957 960 963 966 202 205 208 211 214 217 220 223 480 483 486 489 492 495 498 501 611 614 617 620 623 626 629 632 742 745 748 751 701 700; 3219 570 571 702 701; 3220 571 704 703; 3222 573 574 705 704; 3223 574 707 706; 3225 576 577 708 707; 3226 577 710 709; 3228 579 580 711 710; 3229 580 820 819; 3231 689 690 821 820; 3232 690 823 822; 3234 692 693 824 823; 3235 693 826 825; 3237 695 696 827 826; 3238 696 829 828; 3240 698 699 830 829; 3241 699 832 831; 3243 701 702 833 832; 3244 702 835 834; 3246 704 705 836 835; 3247 705 838 837; 3249 707 708 839 838; 3250 708 841 840; 3252 710 711 842 841; 3253 711 945 944; 3255 820 821 946 945; 3256 821 948 947; 3258 823 824 949 948; 3259 824 951 950; 3261 826 827 952 951; 3262 827 954 953; 3264 829 830 955 954; 3265 830 957 956; 3267 832 833 958 957; 3268 833 960 959; 3270 835 836 961 960; 3271 836 963 962; 3273 838 839 964 963; 3274 839 966 965; 3276 841 842 967 966; 3277 842 1070 1069; 3279 945 946 1071 1070; 3280 1073 1072; 3282 948 949 1074 1073; 3283 1076 1075; 3285 951 952 1077 1076; 3286 1079 1078; 3288 954 955 1080 1079; 3289 1082 1081; 3291 957 958 1083 1082; 3292 1085 1084; 3294 960 961 1086 1085; 3295 1088 1087; 3297 963 964 1089 1088; 3298 1091 1090; 3300 966 967 1092 1091; 3301 480 479; 3303 202 203 481 480; 3304 203 483 482; 3306 205 206 484 483; 3307 206 486 485; 3309 208 209 487 486; 3310 209 489 488; 3312 211 212 490 489; 3313 212 492 491; 3315 214 215 493 492; 3316 215 495 494; 3318 217 218 496 495; 3319 218 498 497; 3321 220 221 499 498; 3322 221 501 500; 3324 223 224 502 501; 3325 224 611 610; 3327 480 481 612 611; 3328 481 614 613; 3330 483 484 615 614; 3331 484 617 616; 3333 486 487 618 617; 3334 487 620 619; 3336 489 490 621 620; 3337 490 623 622; 3339 492 493 624 623; 3340 493 626 625; 3342 495 496 627 626; 3343 496 629 628; 3345 498 499 630 629; 3346 499 632 631; 3348 501 502 633 632; 3349 502 742 741; 3351 611 612 743 742; 3352 612 745 744; 3354 614 615 746 745; 3355 615 748 747; 3357 617 618 749 748; 3358 618 751 750; 3360 620 621 752 751; 3361 621 754 753; 3363 623 624 755 754; 3364 624 757 756; 3366 626 627 758 757; 3367 627 760 759; 3369 629 630 761 760; 3370 630 763 762; 3372 632 633 764 763; 3373 633 870 869; 3375 742 743 871 870; 3376 743 873 872; 3378 745 746 874 873; 3379 746 876 875; 3381 748 749 877 876; 3382 749 879 878; 3384 751 752 880 879; 3385 752 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 572 575 578 581 691 694 697 700 703 706 709 712 822 825 828 831 834 837 840 843 946 949 952 955 958 961 964 967 204 207 210 213 216 219 222 225 482 485 488 491 494 497 500 503 613 616 619 622 625 628 631 634 744 747 750 753 703 706 709 712 822 825 828 831 834 837 840 843 947 950 953 956 959 962 965 968 947 950 953 956 959 962 965 968 482 485 488 491 494 497 500 503 613 616 619 622 625 628 631 634 744 747 750 753 756 759 762 765 872 875 878 881 702 705 708 711 821 824 827 830 833 836 839 842 946 949 952 955 958 961 964 967 1072 1075 1078 1081 1084 1087 1090 1093 481 484 487 490 493 496 499 502 612 615 618 621 624 627 630 633 743 746 749 752 755 758 761 764 871 874 877 880 19 1071 1074 1077 1080 1083 1086 1089 1092 Page 19 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 1050. 1051. 1052. 1053. 1054. 1055. 1056. 1057. 1058. 1059. 1060. 1061. 1062. 1063. 1064. 1065. 1066. 1067. 1068. 1069. 1070. 1071. 1072. 1073. 1074. 1075. 1076. 1077. 1078. 1079. 1080. 1081. 1082. 1083. 1084. 1085. 1086. 1087. 1088. 1089. 1090. 1091. 1092. 1093. 1094. 1095. 1096. 1097. 1098. 1099. 1100. 1101. 1102. 1103. 1104. 1105. 3386 3389 3392 3395 3398 3401 3404 3407 3410 3413 3416 3419 3422 3425 3428 3431 3434 3437 3440 3443 3446 3449 3452 3455 3458 3461 3464 3467 3470 3473 3476 3479 3482 3485 3488 3491 3494 3497 3500 3503 3506 3509 3512 3515 3518 3521 3524 3527 3530 3533 3536 3539 3542 3545 3548 3551 -- PAGE NO. 753 754 882 881; 3387 754 755 883 882; 3388 755 756 756 757 885 884; 3390 757 758 886 885; 3391 758 759 759 760 888 887; 3393 760 761 889 888; 3394 761 762 762 763 891 890; 3396 763 764 892 891; 3397 764 765 869 870 995 994; 3399 870 871 996 995; 3400 871 872 872 873 998 997; 3402 873 874 999 998; 3403 874 875 875 876 1001 1000; 3405 876 877 1002 1001; 3406 877 878 879 1004 1003; 3408 879 880 1005 1004; 3409 880 881 882 1007 1006; 3411 882 883 1008 1007; 3412 883 884 885 1010 1009; 3414 885 886 1011 1010; 3415 886 887 888 1013 1012; 3417 888 889 1014 1013; 3418 889 890 891 1016 1015; 3420 891 892 1017 1016; 3421 892 994 995 1120 1119; 3423 995 996 1121 1120; 3424 996 997 998 1123 1122; 3426 998 999 1124 1123; 3427 999 1000 1001 1126 1125; 3429 1001 1002 1127 1126; 3430 1003 1004 1129 1128; 3432 1004 1005 1130 1129; 3433 1006 1007 1132 1131; 3435 1007 1008 1133 1132; 3436 1009 1010 1135 1134; 3438 1010 1011 1136 1135; 3439 1012 1013 1138 1137; 3441 1013 1014 1139 1138; 3442 1015 1016 1141 1140; 3444 1016 1017 1142 1141; 3445 401 402 533 532; 3447 402 403 534 533; 3448 403 404 404 405 536 535; 3450 405 406 537 536; 3451 406 407 407 408 539 538; 3453 408 409 540 539; 3454 409 410 410 411 542 541; 3456 411 412 543 542; 3457 412 413 413 414 545 544; 3459 414 415 546 545; 3460 415 416 416 417 548 547; 3462 417 418 549 548; 3463 418 419 419 420 551 550; 3465 420 421 552 551; 3466 421 422 422 423 554 553; 3468 423 424 555 554; 3469 424 425 532 533 664 663; 3471 533 534 665 664; 3472 534 535 535 536 667 666; 3474 536 537 668 667; 3475 537 538 538 539 670 669; 3477 539 540 671 670; 3478 540 541 541 542 673 672; 3480 542 543 674 673; 3481 543 544 544 545 676 675; 3483 545 546 677 676; 3484 546 547 547 548 679 678; 3486 548 549 680 679; 3487 549 550 550 551 682 681; 3489 551 552 683 682; 3490 552 553 553 554 685 684; 3492 554 555 686 685; 3493 555 556 663 664 795 794; 3495 664 665 796 795; 3496 665 666 666 667 798 797; 3498 667 668 799 798; 3499 668 669 669 670 801 800; 3501 670 671 802 801; 3502 671 672 672 673 804 803; 3504 673 674 805 804; 3505 674 675 675 676 807 806; 3507 676 677 808 807; 3508 677 678 678 679 810 809; 3510 679 680 811 810; 3511 680 681 681 682 813 812; 3513 682 683 814 813; 3514 683 684 684 685 816 815; 3516 685 686 817 816; 3517 686 687 794 795 920 919; 3519 795 796 921 920; 3520 796 797 797 798 923 922; 3522 798 799 924 923; 3523 799 800 800 801 926 925; 3525 801 802 927 926; 3526 802 803 803 804 929 928; 3528 804 805 930 929; 3529 805 806 806 807 932 931; 3531 807 808 933 932; 3532 808 809 809 810 935 934; 3534 810 811 936 935; 3535 811 812 812 813 938 937; 3537 813 814 939 938; 3538 814 815 815 816 941 940; 3540 816 817 942 941; 3541 817 818 919 920 1045 1044; 3543 920 921 1046 1045; 3544 921 922 923 1048 1047; 3546 923 924 1049 1048; 3547 924 925 926 1051 1050; 3549 926 927 1052 1051; 3550 927 928 929 1054 1053; 3552 929 930 1055 1054; 3553 930 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 20 884 883 887 886 890 889 893 892 997 996 1000 999 878 1003 1002 881 1006 1005 884 1009 1008 887 1012 1011 890 1015 1014 893 1018 1017 997 1122 1121 1000 1125 1124 1002 1003 1128 1005 1006 1131 1008 1009 1134 1011 1012 1137 1014 1015 1140 1017 1018 1143 535 534 538 537 541 540 544 543 547 546 550 549 553 552 556 555 666 665 669 668 672 671 675 674 678 677 681 680 684 683 687 686 797 796 800 799 803 802 806 805 809 808 812 811 815 814 818 817 922 921 925 924 928 927 931 930 934 933 937 936 940 939 943 942 922 1047 1046 925 1050 1049 928 1053 1052 931 1056 1055 1127 1130 1133 1136 1139 1142 Page 20 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 1106. 1107. 1108. 1109. 1110. 1111. 1112. 1113. 1114. 1115. 1116. 1117. 1118. 1119. 1120. 1121. 1122. 1123. 1124. 1125. 1126. 1127. 1128. 1129. 1130. 1131. 1132. 1133. 1134. 1135. 1136. 1137. 1138. 1139. 1140. 1141. 1142. 1143. 1144. 1145. 1146. 1147. 1148. 1149. 1150. 1151. 1152. 1153. 1154. 1155. 1156. 1157. 1158. 1159. 1160. 1161. 3554 3557 3560 3563 3566 3569 3572 3575 3578 3581 3584 3587 3590 3593 3596 3599 3602 3605 3608 3611 3614 3617 3620 3624 3627 3630 3633 3636 3639 3642 3645 3648 3651 3654 3657 3660 3663 3666 3669 3672 3675 3678 3681 3684 3687 3690 3693 3696 3699 3702 3705 3708 3711 3714 3717 3720 -- PAGE NO. 21 931 932 1057 1056; 3555 932 933 1058 1057; 3556 933 934 1059 1058 934 935 1060 1059; 3558 935 936 1061 1060; 3559 936 937 1062 1061 937 938 1063 1062; 3561 938 939 1064 1063; 3562 939 940 1065 1064 940 941 1066 1065; 3564 941 942 1067 1066; 3565 942 943 1068 1067 1044 1045 1170 1169; 3567 1045 1046 1171 1170; 3568 1046 1047 1172 1171 1047 1048 1173 1172; 3570 1048 1049 1174 1173; 3571 1049 1050 1175 1174 1050 1051 1176 1175; 3573 1051 1052 1177 1176; 3574 1052 1053 1178 1177 1053 1054 1179 1178; 3576 1054 1055 1180 1179; 3577 1055 1056 1181 1180 1056 1057 1182 1181; 3579 1057 1058 1183 1182; 3580 1058 1059 1184 1183 1059 1060 1185 1184; 3582 1060 1061 1186 1185; 3583 1061 1062 1187 1186 1062 1063 1188 1187; 3585 1063 1064 1189 1188; 3586 1064 1065 1190 1189 1065 1066 1191 1190; 3588 1066 1067 1192 1191; 3589 1067 1068 1193 1192 1194 1201 1229 1222; 3591 1201 1208 1231 1229; 3592 1208 1215 1238 1231 1215 729 860 1238; 3594 1222 1229 1248 1241; 3595 1229 1231 1250 1248 1231 1238 1257 1250; 3597 1238 860 985 1257; 3598 1241 1248 1274 1260 1248 1250 1267 1274; 3600 1250 1257 1275 1267; 3601 1257 985 1110 1275 1211 1218 1239 1234; 3603 1218 741 869 1239; 3604 1234 1239 1258 1253 1239 869 994 1258; 3606 1253 1258 1276 1270; 3607 1258 994 1119 1276 1200 1207 1230 1228; 3609 1207 1214 1237 1230; 3610 1214 1221 1240 1237 1221 774 899 1240; 3612 1228 1230 1249 1247; 3613 1230 1237 1256 1249 1237 1240 1259 1256; 3615 1240 899 1024 1259; 3616 1247 1249 1277 1266 1249 1256 1273 1277; 3618 1256 1259 1278 1273; 3619 1259 1024 1149 1278 1 26 451 426; 3621 26 51 455 451; 3622 51 76 459 455; 3623 76 101 463 459 101 126 467 463; 3625 126 151 471 467; 3626 151 176 475 471 176 201 479 475; 3628 201 226 504 479; 3629 226 251 508 504 251 276 512 508; 3631 276 301 516 512; 3632 301 326 520 516 326 351 524 520; 3634 351 376 528 524; 3635 376 401 532 528 426 451 582 557; 3637 451 455 586 582; 3638 455 459 590 586 459 463 594 590; 3640 463 467 598 594; 3641 467 471 602 598 471 475 606 602; 3643 475 479 610 606; 3644 479 504 635 610 504 508 639 635; 3646 508 512 643 639; 3647 512 516 647 643 516 520 651 647; 3649 520 524 655 651; 3650 524 528 659 655 528 532 663 659; 3652 557 582 713 688; 3653 582 586 717 713 586 590 721 717; 3655 590 594 725 721; 3656 594 598 729 725 598 602 733 729; 3658 602 606 737 733; 3659 606 610 741 737 610 635 766 741; 3661 635 639 770 766; 3662 639 643 774 770 643 647 778 774; 3664 647 651 782 778; 3665 651 655 786 782 655 659 790 786; 3667 659 663 794 790; 3668 688 713 844 819 713 717 848 844; 3670 717 721 852 848; 3671 721 725 856 852 725 729 860 856; 3673 774 778 903 899; 3674 778 782 907 903 782 786 911 907; 3676 786 790 915 911; 3677 790 794 919 915 819 844 969 944; 3679 844 848 973 969; 3680 848 852 977 973 852 856 981 977; 3682 856 860 985 981; 3683 899 903 1028 1024 903 907 1032 1028; 3685 907 911 1036 1032; 3686 911 915 1040 1036 915 919 1044 1040; 3688 944 969 1094 1069; 3689 969 973 1098 1094 973 977 1102 1098; 3691 977 981 1106 1102; 3692 981 985 1110 1106 1024 1028 1153 1149; 3694 1028 1032 1157 1153; 3695 1032 1036 1161 1157 1036 1040 1165 1161; 3697 1040 1044 1169 1165; 3698 9 34 452 434 34 59 456 452; 3700 59 84 460 456; 3701 84 109 464 460 109 134 468 464; 3703 134 159 472 468; 3704 159 184 476 472 184 209 487 476; 3706 209 234 505 487; 3707 234 259 509 505 259 284 513 509; 3709 284 309 517 513; 3710 309 334 521 517 334 359 525 521; 3712 359 384 529 525; 3713 384 409 540 529 434 452 583 565; 3715 452 456 587 583; 3716 456 460 591 587 460 464 595 591; 3718 464 468 599 595; 3719 468 472 603 599 472 476 607 603; 3721 476 487 618 607; 3722 487 505 636 618 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 21 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 1162. 1163. 1164. 1165. 1166. 1167. 1168. 1169. 1170. 1171. 1172. 1173. 1174. 1175. 1176. 1177. 1178. 1179. 1180. 1181. 1182. 1183. 1184. 1185. 1186. 1187. 1188. 1189. 1190. 1191. 1192. 1193. 1194. 1195. 1196. 1197. 1198. 1199. 1200. 1201. 1202. 1203. 1204. 1205. 1206. 1207. 1208. 1209. 1210. 1211. 1212. 1213. 1214. 1215. 1216. 1217. 3723 3726 3729 3732 3735 3738 3741 3744 3747 3750 3753 3756 3759 3762 3765 3768 3771 3774 3777 3780 3783 3786 3789 3792 3795 3798 3801 3804 3807 3810 3813 3816 3819 3822 3825 3828 3831 3834 3837 3840 3843 3846 3849 3852 3855 3858 3861 3864 3867 3870 3873 3876 3879 3882 3885 3888 -- PAGE NO. 22 505 509 640 636; 3724 509 513 644 640; 3725 513 517 648 644 517 521 652 648; 3727 521 525 656 652; 3728 525 529 660 656 529 540 671 660; 3730 565 583 714 696; 3731 583 587 718 714 587 591 722 718; 3733 591 595 726 722; 3734 595 599 730 726 599 603 734 730; 3736 603 607 738 734; 3737 607 618 749 738 618 636 767 749; 3739 636 640 771 767; 3740 640 644 775 771 644 648 779 775; 3742 648 652 783 779; 3743 652 656 787 783 656 660 791 787; 3745 660 671 802 791; 3746 696 714 845 827 714 718 849 845; 3748 718 722 853 849; 3749 722 726 857 853 726 730 861 857; 3751 730 734 864 861; 3752 734 738 867 864 738 749 877 867; 3754 749 767 894 877; 3755 767 771 896 894 771 775 900 896; 3757 775 779 904 900; 3758 779 783 908 904 783 787 912 908; 3760 787 791 916 912; 3761 791 802 927 916 827 845 970 952; 3763 845 849 974 970; 3764 849 853 978 974 853 857 982 978; 3766 857 861 986 982; 3767 861 864 989 986 864 867 992 989; 3769 867 877 1002 992; 3770 877 894 1019 1002 894 896 1021 1019; 3772 896 900 1025 1021; 3773 900 904 1029 1025 904 908 1033 1029; 3775 908 912 1037 1033; 3776 912 916 1041 1037 916 927 1052 1041; 3778 952 970 1095 1077; 3779 970 974 1099 1095 974 978 1103 1099; 3781 978 982 1107 1103; 3782 982 986 1111 1107 986 989 1114 1111; 3784 989 992 1117 1114; 3785 992 1002 1127 1117 1002 1019 1144 1127; 3787 1019 1021 1146 1144; 3788 1021 1025 1150 1025 1029 1154 1150; 3790 1029 1033 1158 1154; 3791 1033 1037 1162 1037 1041 1166 1162; 3793 1041 1052 1177 1166; 3794 17 42 453 442 42 67 457 453; 3796 67 92 461 457; 3797 92 117 465 461 117 142 469 465; 3799 142 167 473 469; 3800 167 192 477 473 192 217 495 477; 3802 217 242 506 495; 3803 242 267 510 506 267 292 514 510; 3805 292 317 518 514; 3806 317 342 522 518 342 367 526 522; 3808 367 392 530 526; 3809 392 417 548 530 442 453 584 573; 3811 453 457 588 584; 3812 457 461 592 588 461 465 596 592; 3814 465 469 600 596; 3815 469 473 604 600 473 477 608 604; 3817 477 495 626 608; 3818 495 506 637 626 506 510 641 637; 3820 510 514 645 641; 3821 514 518 649 645 518 522 653 649; 3823 522 526 657 653; 3824 526 530 661 657 530 548 679 661; 3826 573 584 715 704; 3827 584 588 719 715 588 592 723 719; 3829 592 596 727 723; 3830 596 600 731 727 600 604 735 731; 3832 604 608 739 735; 3833 608 626 757 739 626 637 768 757; 3835 637 641 772 768; 3836 641 645 776 772 645 649 780 776; 3838 649 653 784 780; 3839 653 657 788 784 657 661 792 788; 3841 661 679 810 792; 3842 704 715 846 835 715 719 850 846; 3844 719 723 854 850; 3845 723 727 858 854 727 731 862 858; 3847 731 735 865 862; 3848 735 739 868 865 739 757 885 868; 3850 757 768 895 885; 3851 768 772 897 895 772 776 901 897; 3853 776 780 905 901; 3854 780 784 909 905 784 788 913 909; 3856 788 792 917 913; 3857 792 810 935 917 835 846 971 960; 3859 846 850 975 971; 3860 850 854 979 975 854 858 983 979; 3862 858 862 987 983; 3863 862 865 990 987 865 868 993 990; 3865 868 885 1010 993; 3866 885 895 1020 1010 895 897 1022 1020; 3868 897 901 1026 1022; 3869 901 905 1030 1026 905 909 1034 1030; 3871 909 913 1038 1034; 3872 913 917 1042 1038 917 935 1060 1042; 3874 960 971 1096 1085; 3875 971 975 1100 1096 975 979 1104 1100; 3877 979 983 1108 1104; 3878 983 987 1112 1108 987 990 1115 1112; 3880 990 993 1118 1115; 3881 993 1010 1135 1118 1010 1020 1145 1135; 3883 1020 1022 1147 1145; 3884 1022 1026 1151 1026 1030 1155 1151; 3886 1030 1034 1159 1155; 3887 1034 1038 1163 1038 1042 1167 1163; 3889 1042 1060 1185 1167; 3890 25 50 454 450 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 1146 1158 1147 1159 Page 22 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 1218. 1219. 1220. 1221. 1222. 1223. 1224. 1225. 1226. 1227. 1228. 1229. 1230. 1231. 1232. 1233. 1234. 1235. 1236. 1237. 1238. 1239. 1240. 1241. 1242. 1243. 1244. 1245. 1246. 1247. 1248. 1249. 1250. 1251. 1252. 1253. 1254. 1255. 1256. 1257. 1258. 1259. 1260. 1261. 1262. 1263. 1264. 1265. 1266. 1267. 1268. 1269. 1270. 1271. 1272. 1273. -- PAGE NO. 23 3891 50 75 458 454; 3892 75 100 462 458; 3893 100 125 466 462 3894 125 150 470 466; 3895 150 175 474 470; 3896 175 200 478 474 3897 200 225 503 478; 3898 225 250 507 503; 3899 250 275 511 507 3900 275 300 515 511; 3901 300 325 519 515; 3902 325 350 523 519 3903 350 375 527 523; 3904 375 400 531 527; 3905 400 425 556 531 3906 450 454 585 581; 3907 454 458 589 585; 3908 458 462 593 589 3909 462 466 597 593; 3910 466 470 601 597; 3911 470 474 605 601 3912 474 478 609 605; 3913 478 503 634 609; 3914 503 507 638 634 3915 507 511 642 638; 3916 511 515 646 642; 3917 515 519 650 646 3918 519 523 654 650; 3919 523 527 658 654; 3920 527 531 662 658 3921 531 556 687 662; 3922 581 585 716 712; 3923 585 589 720 716 3924 589 593 724 720; 3925 593 597 728 724; 3926 597 601 732 728 3927 601 605 736 732; 3928 605 609 740 736; 3929 609 634 765 740 3930 634 638 769 765; 3931 638 642 773 769; 3932 642 646 777 773 3933 646 650 781 777; 3934 650 654 785 781; 3935 654 658 789 785 3936 658 662 793 789; 3937 662 687 818 793; 3938 712 716 847 843 3939 716 720 851 847; 3940 720 724 855 851; 3941 724 728 859 855 3942 728 732 863 859; 3943 732 736 866 863; 3944 773 777 902 898 3945 777 781 906 902; 3946 781 785 910 906; 3947 785 789 914 910 3948 789 793 918 914; 3949 793 818 943 918; 3950 843 847 972 968 3951 847 851 976 972; 3952 851 855 980 976; 3953 855 859 984 980 3954 859 863 988 984; 3955 863 866 991 988; 3956 898 902 1027 1023 3957 902 906 1031 1027; 3958 906 910 1035 1031; 3959 910 914 1039 1035 3960 914 918 1043 1039; 3961 918 943 1068 1043; 3962 968 972 1097 1093 3963 972 976 1101 1097; 3964 976 980 1105 1101; 3965 980 984 1109 1105 3966 984 988 1113 1109; 3967 988 991 1116 1113; 3968 1023 1027 1152 1148 3969 1027 1031 1156 1152; 3970 1031 1035 1160 1156; 3971 1035 1039 1164 1160 3972 1039 1043 1168 1164; 3973 1043 1068 1193 1168; 3974 1194 1195 1223 1222 3975 1195 1196 1224 1223; 3976 1196 1197 1225 1224; 3977 1197 1198 1226 1225 3978 1198 1199 1227 1226; 3979 1199 1200 1228 1227; 3980 1222 1223 1242 1241 3981 1223 1224 1243 1242; 3982 1224 1225 1244 1243; 3983 1225 1226 1245 1244 3984 1226 1227 1246 1245; 3985 1227 1228 1247 1246; 3986 1241 1242 1261 1260 3987 1242 1243 1262 1261; 3988 1243 1244 1263 1262; 3989 1244 1245 1264 1263 3990 1245 1246 1265 1264; 3991 1246 1247 1266 1265; 3992 1208 1209 1232 1231 3993 1209 1210 1233 1232; 3994 1210 1211 1234 1233; 3995 1211 1212 1235 1234 3996 1212 1213 1236 1235; 3997 1213 1214 1237 1236; 3998 1231 1232 1251 1250 3999 1232 1233 1252 1251; 4000 1233 1234 1253 1252; 4001 1234 1235 1254 1253 4002 1235 1236 1255 1254; 4003 1236 1237 1256 1255; 4004 1250 1251 1268 1267 4005 1252 1253 1270 1269; 4006 1253 1254 1271 1270; 4007 1255 1256 1273 1272 4008 1298 1299 1316 1315; 4009 1299 1300 1317 1316; 4010 1300 1301 1318 1317 4011 1301 1302 1319 1318; 4012 1302 1303 1320 1319; 4013 1303 1304 1321 1320 4014 1304 1305 1322 1321; 4015 1305 1306 1323 1322; 4016 1306 1307 1324 1323 4017 1307 1308 1325 1324; 4018 1308 1309 1326 1325; 4019 1309 1310 1327 1326 4020 1310 1311 1328 1327; 4021 1311 1312 1329 1328; 4022 1312 1313 1330 1329 4023 1313 1314 1331 1330; 4024 1315 1316 1333 1332; 4025 1316 1317 1334 1333 4026 1317 1318 1335 1334; 4027 1318 1319 1336 1335; 4028 1319 1320 1337 1336 4029 1320 1321 1338 1337; 4030 1321 1322 1339 1338; 4031 1322 1323 1340 1339 4032 1323 1324 1341 1340; 4033 1324 1325 1342 1341; 4034 1325 1326 1343 1342 4035 1326 1327 1344 1343; 4036 1327 1328 1345 1344; 4037 1328 1329 1346 1345 4038 1329 1330 1347 1346; 4039 1330 1331 1348 1347; 4040 1332 1333 1350 1349 4041 1333 1334 1351 1350; 4042 1334 1335 1352 1351; 4043 1335 1336 1353 1352 4044 1336 1337 1354 1353; 4045 1337 1338 1355 1354; 4046 1338 1339 1356 1355 4047 1339 1340 1357 1356; 4048 1340 1341 1358 1357; 4049 1341 1342 1359 1358 4050 1342 1343 1360 1359; 4051 1343 1344 1361 1360; 4052 1344 1345 1362 1361 4053 1345 1346 1363 1362; 4054 1346 1347 1364 1363; 4055 1347 1348 1365 1364 DEFINE MATERIAL START C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 23 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 1274. 1275. 1276. 1277. 1278. 1279. 1280. 1281. 1282. 1283. 1284. 1285. 1286. 1287. 1288. 1289. 1290. 1291. 1292. 1293. 1294. 1295. 1296. 1297. 1298. 1299. 1300. 1301. 1302. 1303. 1304. 1305. 1306. 1307. 1308. 1309. 1310. 1311. 1312. 1313. 1314. 1315. 1316. 1317. 1318. 1319. 1320. 1321. 1322. 1323. 1324. 1325. 1326. 1327. 1328. 1329. -- PAGE NO. 24 ISOTROPIC MIEMBROS E 1 *E 221467 POISSON 0.17 ALPHA 5.5E-006 DAMP 0.05 ISOTROPIC COLUMNAS E 221467 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5E-006 DAMP 0.05 ISOTROPIC TRABES E 110733 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5E-006 DAMP 0.05 ISOTROPIC PLACAS *E 1 E 221467 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5E-006 DAMP 0.05 END DEFINE MATERIAL CONSTANTS MATERIAL MIEMBROS MEMB 1 TO 2478 2483 TO 2524 2529 TO 2651 2655 TO 2675 2679 2680 TO 2699 MATERIAL COLUMNAS MEMB 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 2717 MATERIAL TRABES MEMB 2703 TO 2714 MATERIAL PLACAS MEMB 2718 TO 4055 MEMBER PROPERTY AMERICAN 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 2716 2717 PRIS YD 30 ZD 30 2703 TO 2714 PRIS YD 20 ZD 120 UNIT METER KG MEMBER PROPERTY AMERICAN 2363 TO 2414 2538 TO 2569 2618 TO 2651 PRIS YD 0.2 ZD 1 2415 TO 2478 2570 TO 2617 PRIS YD 1 ZD 0.2 2483 TO 2491 2510 TO 2512 2529 TO 2537 PRIS YD 1 ZD 0.2 2492 TO 2509 2513 TO 2524 2655 TO 2675 2679 TO 2699 PRIS YD 0.2 ZD 1 1 TO 808 PRIS YD 0.3 ZD 1 809 TO 1594 PRIS YD 1 ZD 0.3 1595 TO 1744 1904 TO 2053 2213 TO 2362 PRIS YD 1 ZD 0.3 1745 TO 1903 2054 TO 2212 PRIS YD 0.3 ZD 1 UNIT CM KG ELEMENT PROPERTY 3102 TO 3157 3590 TO 3619 3974 TO 4055 THICKNESS 20 2718 TO 3101 3158 TO 3589 3620 TO 3973 THICKNESS 30 SUPPORTS 1 TO 425 FIXED BUT MX MY MZ KFX 6000 KFY 6000 KFZ 6000 1279 1280 1372 TO 1374 ELASTIC FOOTING 200 200 DIRECT Y SUBGRADE 0.6 MEMBER RELEASE 2703 2707 2711 START MZ C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 24 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 1330. 1331. 1332. 1333. 1334. 1335. 1336. 1337. 1338. 1339. 1340. 1341. 1342. 1343. 1344. 1345. 1346. 1347. 1348. 1349. 1350. 1351. 1352. 1353. 1354. 1355. 1356. 1357. 1358. 1359. 1360. 1361. 1362. 1363. 1364. 1365. 1366. 1367. 1368. 1369. 1370. 1371. 1372. 1373. 1374. 1375. 1376. 1377. 1378. 1379. 1380. 1381. 1382. 1383. 1384. 1385. -- PAGE NO. 25 2706 2710 2714 END MZ UNIT METER KG LOAD 1 GRAVEDAD SELFWEIGHT Y -1 MEMBER LOAD 2703 TO 2714 UNI GY -490 JOINT LOAD 1366 TO 1371 FY -500 MEMBER LOAD 1493 TO 1516 UNI GY -490 LOAD 2 EMPUJE DE AGUA EN CAJA TREN 1 ELEMENT LOAD 3602 3603 3608 3609 3974 TO 3979 3992 TO 3994 TRAP Y 2080 1040 3604 3605 3612 3613 3980 TO 3985 3998 TO 4000 TRAP Y 1040 0 3590 TO 3593 3992 TO 3997 TRAP Y -2080 -1040 3594 TO 3597 3998 TO 4003 TRAP Y -1040 0 3134 TO 3147 3150 3151 3154 3155 PR GY -2080 LOAD 3 EMPUJE DE AGUA FLOCULADOR TREN 1 ELEMENT LOAD 3302 TO 3325 3620 TO 3627 3698 TO 3705 3794 TO 3801 TRAP Y 5200 4160 3326 TO 3349 3636 TO 3643 3714 TO 3721 3810 TO 3817 TRAP Y 4160 3120 3350 TO 3373 3652 TO 3659 3730 TO 3737 3826 TO 3833 TRAP Y 3120 2080 3374 TO 3397 3668 TO 3672 3746 TO 3753 3842 TO 3849 TRAP Y 2080 1040 3398 TO 3421 3678 TO 3682 3762 TO 3769 3858 TO 3865 TRAP Y 1040 0 3158 TO 3181 3698 TO 3705 3794 TO 3801 3890 TO 3897 TRAP Y -5200 -4160 3182 TO 3205 3714 TO 3721 3810 TO 3817 3906 TO 3913 TRAP Y -4160 -3120 3206 TO 3229 3730 TO 3737 3826 TO 3833 3922 TO 3929 TRAP Y -3120 -2080 3230 TO 3253 3746 TO 3753 3842 TO 3849 3938 TO 3943 TRAP Y -2080 -1040 3254 TO 3277 3762 TO 3769 3858 TO 3865 3950 TO 3955 TRAP Y -1040 0 2718 TO 2909 PR GY -5200 LOAD 4 EMPUJE DE AGUA CAJA TREN 2 ELEMENT LOAD 3608 TO 3611 3974 TO 3979 3995 TO 3997 TRAP Y 2080 1040 3612 TO 3615 3980 TO 3985 4001 TO 4003 TRAP Y 1040 0 3590 3591 3602 3603 3992 TO 3997 TRAP Y -2080 -1040 3594 3595 3604 3605 3998 TO 4003 TRAP Y -1040 0 3134 3135 3138 3139 3142 3143 3146 TO 3157 PR GY -2080 LOAD 5 EMPUJE DE AGUA FLOCULADOR TREN 2 ELEMENT LOAD 3446 TO 3469 3628 TO 3635 3706 TO 3713 3802 TO 3809 TRAP Y 5200 4160 3470 TO 3493 3644 TO 3651 3722 TO 3729 3818 TO 3825 TRAP Y 4160 3120 3494 TO 3517 3660 TO 3667 3738 TO 3745 3834 TO 3841 TRAP Y 3120 2080 3518 TO 3541 3673 TO 3677 3754 TO 3761 3850 TO 3857 TRAP Y 2080 1040 3542 TO 3565 3683 TO 3687 3770 TO 3777 3866 TO 3873 TRAP Y 1040 0 3302 TO 3325 3706 TO 3713 3802 TO 3809 3898 TO 3905 TRAP Y -5200 -4160 3326 TO 3349 3722 TO 3729 3818 TO 3825 3914 TO 3921 TRAP Y -4160 -3120 3350 TO 3373 3738 TO 3745 3834 TO 3841 3930 TO 3937 TRAP Y -3120 -2080 3374 TO 3397 3754 TO 3761 3850 TO 3857 3944 TO 3949 TRAP Y -2080 -1040 3398 TO 3421 3770 TO 3777 3866 TO 3873 3956 TO 3961 TRAP Y -1040 0 2910 TO 3101 PR GY -5200 LOAD 6 CANAL EFLUENTE ELEMENT LOAD 3938 TO 3949 TRAP Y 2080 1040 3950 TO 3961 TRAP Y 1040 0 4008 TO 4023 TRAP Y -2080 -1040 4024 TO 4039 TRAP Y -1040 0 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 25 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 1386. 1387. 1388. 1389. 1390. 1391. 1392. 1393. 1394. 1395. 1396. 1397. 1398. 1399. 1400. 1401. 1402. 1403. 1404. 1405. 1406. 1407. 1408. -- PAGE NO. 26 3102 TO 3133 PR GY -2080 *CARGAS DISEÑO LOAD 7 TREN IZQUIERDO LLENO REPEAT LOAD 1 1.82 2 2.21 3 2.21 6 2.21 LOAD 8 TREN DERECHO LLENO REPEAT LOAD 1 1.82 4 2.21 5 2.21 6 2.21 LOAD 9 TANQUE LLENO REPEAT LOAD 1 1.82 2 2.21 3 2.21 4 2.21 5 2.21 6 2.21 *CARGAS SERVICIO LOAD 10 TREN IZQUIERDO LLENO REPEAT LOAD 1 1.0 2 1.0 3 1.0 6 1.0 LOAD 11 TREN DERECHO LLENO REPEAT LOAD 1 1.0 4 1.0 5 1.0 6 1.0 LOAD 12 TANQUE LLENO REPEAT LOAD 1 1.0 2 1.0 3 1.0 4 1.0 5 1.0 6 1.0 *FINISH PDELTA ANALYSIS ** WARNING ** A SOFT MATERIAL WITH (1.0 / 2.215E+05) TIMES THE STIFFNESS OF CONCRETE ENTERED. PLEASE CHECK. P R O B L E M S T A T I S T I C S ----------------------------------NUMBER OF JOINTS/MEMBER+ELEMENTS/SUPPORTS = 1374/ 4055/ 430 ORIGINAL/FINAL BAND-WIDTH= 570/ 75/ 456 DOF TOTAL PRIMARY LOAD CASES = 12, TOTAL DEGREES OF FREEDOM = 8229 SIZE OF STIFFNESS MATRIX = 3753 DOUBLE KILO-WORDS REQRD/AVAIL. DISK SPACE = 65.5/ >2000 MB, EXMEM = 1526.8 MB ++ Adjusting Displacements 13:12:53 1409. LOAD LIST 10 TO 12 1410. PRINT SUPPORT REACTION C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 26 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 METE 27 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 18.27 -53.39 17.71 19.71 -53.01 18.99 20.46 -52.10 19.57 18.90 -50.55 18.28 16.05 -48.36 16.08 12.68 -45.66 13.65 9.35 -42.58 11.43 6.35 -39.13 9.71 2.43 -33.92 7.84 -1.63 -28.48 5.88 -5.00 -24.36 3.88 -8.97 -20.13 1.17 -13.37 -15.72 -1.98 -17.82 -11.20 -5.23 -21.96 -6.63 -8.25 -25.55 -1.90 -10.72 8096.39 1922.04 7589.32 8067.22 1919.46 7552.52 8048.18 1918.58 7525.70 8032.46 1919.22 7502.06 8017.83 1921.60 7479.73 8003.72 1925.97 7458.27 7990.28 1932.42 7437.84 7977.89 1940.62 7418.59 7967.44 1949.11 7401.31 7950.72 1961.72 7380.35 7936.00 1974.99 7361.51 7922.45 1990.70 7344.03 7909.79 2009.57 7327.84 7897.81 2031.85 7312.81 7886.63 2057.45 7298.93 7876.49 2085.82 7286.20 24.82 44.58 60.07 21.32 36.83 53.26 24.81 29.32 52.27 29.18 22.34 51.78 32.24 16.00 50.12 33.27 10.30 46.81 32.30 5.15 41.92 30.35 0.21 36.28 31.32 -5.02 33.81 33.62 -5.62 34.78 38.65 -6.56 38.74 42.38 -7.48 41.65 43.61 -8.16 42.52 42.04 -8.52 41.09 37.93 -8.67 37.53 32.44 -8.88 32.82 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 27 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 METE 28 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -29.74 4.70 -13.17 -34.02 11.19 -15.80 -37.86 15.48 -18.84 -42.37 19.30 -22.78 -47.20 22.72 -27.23 -51.75 25.61 -31.63 -55.19 27.87 -35.15 -56.41 29.43 -36.62 -56.45 30.13 -36.65 20.79 -47.06 23.50 20.19 -45.77 23.06 18.63 -44.46 21.87 16.92 -42.83 20.65 14.80 -40.84 19.16 12.27 -38.52 17.39 9.29 -35.86 15.28 7868.32 2115.35 7275.49 7854.39 2150.82 7261.41 7842.22 2187.26 7249.04 7830.63 2226.16 7237.17 7819.15 2267.90 7225.46 7807.48 2312.46 7213.64 7796.06 2359.62 7201.99 7786.78 2409.19 7192.20 7785.51 2460.50 7190.31 7717.91 2308.73 7595.84 7485.54 2171.23 7334.33 7302.62 2013.44 7105.99 7195.22 1908.54 6961.27 7166.68 1880.07 6914.90 7213.79 1931.84 6966.02 7328.89 2053.68 7102.17 29.74 -9.53 31.13 28.91 -4.43 33.28 30.86 0.37 38.43 31.45 5.18 42.33 29.52 10.32 43.92 24.82 15.98 42.91 17.78 22.31 39.49 9.89 29.69 34.90 5.81 38.37 33.57 25.09 45.03 60.87 19.31 37.39 51.25 19.87 29.96 47.36 22.85 22.96 45.49 25.51 16.56 43.42 26.99 10.80 40.53 27.33 5.51 36.88 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 28 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 METE 29 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 5.60 -32.74 12.59 1.71 -29.12 9.75 -2.30 -25.29 6.77 -6.26 -21.64 3.77 -9.72 -18.10 1.15 -13.03 -14.53 -1.40 -16.38 -10.87 -4.02 -19.93 -7.09 -6.85 -24.04 -3.03 -10.20 -28.27 1.28 -13.70 -32.56 5.57 -17.29 -36.78 9.29 -20.93 -40.43 12.45 -24.18 -43.73 15.18 -27.22 -46.64 17.48 -30.00 -49.05 19.34 -32.36 7481.49 2209.50 7279.98 7575.02 2303.09 7381.40 7464.54 2229.82 7254.79 7299.40 2095.01 7057.09 7176.69 1996.86 6905.14 7127.25 1972.52 6841.27 7156.67 2031.54 6874.29 7258.58 2165.62 6994.17 7401.81 2338.08 7158.60 7490.76 2448.87 7254.47 7381.50 2384.68 7133.40 7216.20 2253.82 6940.56 7088.04 2159.17 6786.04 7026.68 2139.62 6709.87 7038.96 2207.44 6722.51 7125.32 2361.54 6822.86 27.73 0.15 33.52 30.67 -5.47 33.06 31.02 -5.63 32.07 33.78 -6.16 33.85 36.28 -6.96 35.59 37.13 -7.61 36.09 35.97 -8.01 35.04 33.11 -8.29 32.68 29.93 -8.96 30.21 29.12 -10.00 30.43 26.36 -4.42 30.66 25.98 0.84 33.56 25.27 5.82 36.23 22.86 11.07 37.41 18.51 16.82 36.77 12.73 23.20 34.64 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 29 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 METE 30 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -51.03 20.84 -34.34 -51.88 22.53 -35.20 27.06 -41.34 33.03 23.58 -39.71 29.96 20.26 -38.01 27.24 17.21 -36.17 24.92 14.40 -34.19 22.83 11.55 -32.04 20.65 8.39 -29.70 18.13 4.87 -27.23 15.13 1.10 -24.79 11.77 -2.72 -22.23 8.27 -6.33 -19.39 5.01 -9.61 -16.48 2.08 -12.64 -13.56 -0.64 -15.70 -10.59 -3.42 7275.42 2581.26 6994.05 7451.53 2787.87 7185.49 7349.56 2697.91 7613.22 6981.15 2413.16 7182.14 6731.76 2089.61 6837.44 6603.06 1870.89 6633.36 6586.63 1808.86 6585.36 6673.52 1911.91 6689.48 6848.99 2158.66 6921.94 7067.13 2472.26 7210.61 7194.96 2657.63 7372.92 7061.22 2489.25 7197.80 6845.68 2194.98 6906.44 6682.96 1973.04 6679.99 6619.90 1902.19 6588.77 6666.63 2002.44 6649.12 7.64 30.32 32.82 6.69 38.17 34.75 22.23 44.78 58.45 15.28 37.44 47.46 14.74 30.12 42.18 16.63 23.19 39.17 19.02 16.88 36.82 20.94 11.19 34.39 22.44 5.94 31.96 24.32 0.84 30.28 28.32 -4.36 30.98 27.68 -4.84 28.96 29.01 -5.51 29.18 30.44 -6.23 29.85 30.93 -6.85 30.01 30.14 -7.25 29.31 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 30 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 METE 31 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -19.05 -7.55 -6.52 -22.77 -4.53 -10.06 -26.74 -1.77 -13.95 -30.75 0.98 -17.87 -34.54 3.76 -21.53 -37.95 6.32 -24.79 -41.00 8.57 -27.72 -43.89 10.52 -30.50 -46.83 12.25 -33.35 -49.84 13.94 -36.33 -52.96 15.94 -39.44 31.37 -36.55 40.42 26.58 -34.42 36.48 21.86 -32.27 32.74 17.71 -30.17 29.52 14.06 -28.18 26.63 6811.86 2255.83 6842.44 7008.63 2583.76 7098.86 7125.31 2783.27 7244.55 6990.79 2611.82 7074.29 6772.16 2303.43 6787.18 6596.84 2065.13 6550.89 6508.97 1979.38 6430.52 6521.25 2072.02 6445.56 6636.36 2340.56 6595.93 6847.82 2738.61 6862.58 7126.20 3116.31 7189.30 6982.60 3088.33 7632.37 6568.53 2696.65 7117.81 6321.65 2246.63 6722.72 6209.30 1940.78 6497.26 6211.11 1852.31 6454.10 28.38 -7.57 28.04 26.65 -7.98 27.15 26.81 -8.60 28.38 23.02 -3.44 27.53 21.12 1.56 28.77 19.22 6.57 30.26 16.34 11.83 31.01 12.24 17.52 30.66 7.53 23.70 29.69 3.83 30.26 29.43 4.85 36.91 33.20 15.47 44.52 52.57 10.04 37.18 42.54 9.31 29.81 36.62 10.81 23.01 33.04 13.02 16.92 30.55 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 31 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 METE 32 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10.67 -26.22 23.78 7.30 -24.27 20.75 3.84 -22.43 17.39 0.48 -20.92 13.84 -2.87 -19.35 10.18 -6.21 -17.30 6.64 -9.31 -15.07 3.37 -12.24 -12.78 0.25 -15.19 -10.48 -2.92 -18.33 -8.20 -6.33 -21.74 -6.12 -10.09 -25.16 -4.52 -14.03 -28.61 -2.92 -17.98 -32.11 -0.99 -21.78 -35.42 0.95 -25.27 -38.61 2.78 -28.55 6312.26 1992.86 6584.82 6493.46 2332.98 6858.83 6705.08 2765.91 7190.12 6822.07 3017.79 7371.85 6706.99 2778.46 7184.30 6508.38 2362.02 6860.48 6353.74 2046.15 6605.86 6293.68 1940.16 6503.91 6340.48 2071.43 6574.59 6480.73 2414.75 6795.08 6664.08 2860.44 7082.70 6766.81 3123.95 7241.59 6649.69 2874.88 7058.75 6445.91 2433.45 6739.17 6274.28 2088.13 6470.13 6182.02 1952.95 6327.88 15.25 11.47 28.54 17.44 6.57 26.99 20.10 2.10 26.40 24.14 -2.17 27.52 23.51 -3.37 25.26 24.11 -4.45 24.56 24.90 -5.29 24.51 25.15 -5.88 24.40 24.62 -6.23 23.98 23.53 -6.33 23.45 22.54 -6.19 23.48 22.67 -5.96 24.94 18.84 -1.72 23.76 16.12 2.69 23.97 13.51 7.43 24.65 10.32 12.54 25.09 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 32 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 METE 33 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -41.91 4.48 -31.84 -45.51 6.17 -35.38 -49.52 8.00 -39.28 -53.47 10.13 -43.16 32.06 -31.86 44.88 27.02 -29.19 41.14 21.80 -26.59 37.29 17.12 -24.39 33.62 13.05 -22.58 30.13 9.40 -20.99 26.70 5.95 -19.51 23.21 2.65 -18.22 19.59 -0.31 -17.44 15.89 -3.20 -16.64 12.10 -6.21 -15.27 8.38 -9.09 -13.71 4.78 6185.42 2063.23 6336.81 6290.83 2414.82 6500.11 6498.87 2942.46 6802.11 6801.61 3444.86 7193.79 6613.00 3480.67 7650.58 6231.12 3042.89 7137.22 6029.01 2536.46 6747.95 5950.02 2193.50 6530.73 5965.23 2092.57 6492.23 6056.92 2244.98 6620.54 6205.06 2620.15 6884.74 6366.60 3102.86 7201.75 6450.76 3385.06 7374.38 6371.00 3109.86 7194.96 6225.30 2638.74 6885.18 6107.10 2283.89 6640.98 6.44 18.04 25.04 2.32 23.90 24.82 -0.72 29.94 25.50 -0.31 35.72 28.87 6.02 44.64 44.69 3.52 36.53 36.23 3.61 29.03 30.54 5.15 22.48 26.89 7.34 16.76 24.49 9.76 11.71 22.86 12.32 7.32 21.92 15.19 3.67 21.95 18.78 0.76 23.30 18.64 -1.51 21.01 19.06 -3.10 19.89 19.52 -4.10 19.43 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 33 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 METE 34 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -11.84 -12.15 1.25 -14.61 -10.59 -2.33 -17.53 -9.06 -6.07 -20.58 -7.74 -9.98 -23.51 -7.03 -14.00 -26.46 -6.30 -18.03 -29.65 -5.07 -21.98 -32.85 -3.72 -25.76 -36.08 -2.38 -29.45 -39.59 -1.01 -33.23 -43.59 0.56 -37.28 -48.04 2.43 -41.57 -52.25 4.63 -45.65 28.95 -25.84 47.47 24.27 -22.95 44.30 19.32 -20.33 40.75 6060.27 2163.34 6542.69 6096.76 2305.46 6609.38 6203.80 2683.72 6818.93 6338.05 3179.18 7091.74 6409.76 3472.37 7241.84 6328.94 3186.96 7068.49 6178.55 2689.58 6764.17 6043.81 2302.32 6505.37 5965.36 2147.77 6364.58 5960.05 2262.37 6365.66 6036.70 2642.38 6514.80 6203.55 3219.22 6803.97 6474.34 3773.97 7196.63 6238.32 3876.64 7667.40 5941.63 3464.70 7227.19 5803.43 2992.85 6896.37 19.64 -4.68 19.18 19.28 -4.92 18.93 18.54 -4.73 18.83 17.75 -3.94 19.30 17.38 -2.47 20.76 13.99 0.43 19.46 11.02 4.09 19.14 8.03 8.43 19.35 4.72 13.26 19.64 1.02 18.46 19.82 -2.82 23.94 20.07 -6.14 29.59 20.90 -7.74 34.96 22.98 -4.99 45.02 35.63 -3.92 35.30 28.63 -2.54 27.79 23.72 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 34 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 METE 35 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 14.84 -18.47 36.98 10.94 -17.20 33.14 7.47 -16.25 29.29 4.23 -15.37 25.45 1.19 -14.57 21.64 -1.39 -14.31 17.83 -3.87 -14.03 13.96 -6.51 -13.21 10.11 -9.05 -12.37 6.25 -11.46 -11.63 2.35 -13.89 -10.91 -1.61 -16.48 -10.14 -5.64 -19.19 -9.44 -9.74 -21.73 -9.33 -13.90 -24.31 -9.23 -18.08 -27.19 -8.58 -22.21 5758.21 2677.48 6713.44 5776.27 2582.57 6677.79 5841.86 2715.00 6776.81 5938.18 3051.66 6986.33 6034.10 3495.73 7241.19 6078.40 3761.36 7379.76 6035.50 3495.82 7225.13 5950.48 3055.94 6966.41 5876.96 2731.41 6764.23 5846.77 2621.92 6681.53 5869.73 2749.11 6732.43 5935.58 3092.69 6899.98 6013.13 3551.86 7121.50 6051.63 3830.41 7244.58 6011.52 3559.96 7098.93 5925.75 3101.48 6848.15 -0.67 21.78 20.52 1.64 16.62 18.48 4.25 12.01 17.21 7.01 8.07 16.67 9.85 5.21 17.03 12.72 3.94 18.60 13.34 0.37 16.32 13.85 -1.64 15.09 14.15 -2.65 14.51 14.20 -3.15 14.22 13.96 -3.33 14.06 13.42 -2.98 14.13 12.58 -1.61 14.74 11.48 1.32 16.21 8.75 2.61 14.79 5.80 5.55 14.24 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 35 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 METE 36 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -30.12 -7.87 -26.30 -33.10 -7.16 -30.34 -36.37 -6.29 -34.41 -40.21 -5.07 -38.60 -44.62 -3.34 -42.93 -48.81 -1.21 -47.00 22.19 -17.52 49.17 18.37 -15.06 46.59 14.41 -13.25 43.39 10.78 -12.29 39.64 7.61 -11.93 35.62 4.76 -11.86 31.51 2.04 -11.79 27.40 -0.59 -11.53 23.45 -2.83 -11.51 19.62 -4.95 -11.45 15.76 5841.58 2752.08 6635.86 5788.18 2614.64 6518.03 5779.81 2717.00 6512.46 5824.90 3058.78 6626.34 5935.62 3586.71 6860.43 6142.02 4104.69 7196.91 5857.52 4276.83 7682.62 5671.76 3969.57 7373.51 5594.52 3630.10 7145.38 5571.20 3408.00 7017.30 5580.18 3337.46 6982.63 5612.02 3419.83 7032.05 5655.97 3644.61 7152.51 5693.29 3954.43 7305.92 5703.13 4148.22 7387.83 5687.94 3946.89 7274.62 2.63 9.57 14.25 -0.74 14.14 14.49 -4.28 18.96 14.84 -7.99 23.96 15.29 -11.99 29.28 15.89 -16.52 34.77 16.40 -16.20 44.38 25.47 -11.82 33.27 19.86 -9.22 26.32 16.17 -6.93 21.22 13.87 -4.42 16.77 12.40 -1.56 12.55 11.53 1.50 8.75 11.21 4.34 6.26 11.68 6.43 6.55 13.39 7.91 1.78 11.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 36 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 METE 37 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -7.18 -11.14 11.82 -9.22 -11.08 7.73 -11.09 -11.18 3.56 -13.00 -11.32 -0.70 -15.13 -11.38 -5.04 -17.51 -11.26 -9.38 -19.79 -11.46 -13.70 -22.13 -11.72 -18.09 -24.73 -11.69 -22.55 -27.21 -11.80 -27.01 -29.62 -11.86 -31.34 -32.16 -11.66 -35.49 -35.15 -11.01 -39.51 -38.75 -9.77 -43.40 -42.48 -8.06 -47.17 12.09 -7.16 50.02 5651.22 3632.09 7098.30 5615.51 3407.87 6962.35 5600.12 3334.15 6903.84 5611.70 3421.38 6930.03 5643.49 3659.94 7031.52 5676.77 3989.00 7171.09 5690.69 4199.52 7249.73 5684.25 4002.40 7148.51 5653.62 3682.82 6982.47 5617.35 3449.24 6844.08 5592.86 3362.94 6765.48 5589.57 3437.47 6755.58 5612.99 3676.15 6820.03 5673.97 4053.82 6966.36 5803.67 4438.53 7195.17 5470.76 4679.83 7695.31 8.50 -0.21 10.15 8.63 -0.90 9.68 8.61 -1.21 9.44 8.52 -1.41 9.32 8.23 -1.23 9.38 7.38 0.28 9.91 5.48 4.57 11.34 3.49 4.35 9.87 0.51 6.98 9.33 -2.93 10.97 9.29 -6.42 15.35 9.50 -9.81 19.74 9.89 -13.33 24.14 10.37 -17.78 28.95 10.76 -25.11 35.05 10.14 -26.37 41.21 13.91 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 37 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 METE 38 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10.10 -6.23 48.36 7.61 -5.90 45.42 5.30 -6.21 41.72 3.18 -6.82 37.65 1.22 -7.59 33.42 -0.68 -8.42 29.13 -2.74 -9.00 24.96 -4.67 -9.03 21.23 -6.47 -8.99 17.49 -8.18 -9.42 13.39 -9.53 -10.10 9.16 -10.75 -10.78 4.88 -12.01 -11.51 0.49 -13.50 -12.36 -4.09 -15.48 -13.09 -8.81 -17.65 -13.44 -13.39 5389.03 4538.83 7546.48 5351.09 4390.85 7435.46 5332.11 4296.11 7365.60 5324.03 4258.53 7329.52 5324.52 4277.71 7324.14 5329.64 4352.80 7346.23 5331.56 4469.97 7384.90 5323.42 4545.25 7397.75 5318.98 4455.97 7338.07 5306.64 4325.55 7256.23 5293.91 4239.53 7193.52 5288.80 4213.29 7160.84 5293.94 4248.60 7159.85 5306.71 4343.98 7187.82 5319.52 4483.61 7233.58 5325.51 4579.21 7256.57 -19.89 30.40 9.95 -16.41 24.97 8.14 -13.87 21.11 6.97 -11.12 17.42 6.23 -7.89 13.52 5.80 -4.29 9.52 5.63 -1.01 6.41 5.89 0.51 7.19 7.36 2.69 2.26 5.69 2.99 1.25 5.11 2.78 1.22 4.87 2.68 1.15 4.74 2.79 0.88 4.66 2.96 0.59 4.67 2.53 1.28 4.88 0.03 5.90 5.97 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 38 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 METE 39 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -19.92 -13.93 -18.11 -22.19 -14.87 -23.12 -24.12 -15.95 -28.08 -25.86 -16.80 -32.78 -27.45 -17.26 -37.03 -29.01 -17.29 -40.67 -30.81 -16.82 -43.62 -32.97 -16.33 -46.21 2.42 2.42 51.32 1.70 1.70 50.26 0.40 0.40 47.23 -0.89 -0.89 43.44 -2.10 -2.10 39.28 -3.20 -3.20 35.06 -4.31 -4.31 30.84 -5.64 -5.64 26.52 5335.78 4503.42 7209.66 5336.90 4382.81 7138.79 5334.59 4304.75 7081.24 5335.88 4284.67 7045.83 5344.54 4324.95 7034.56 5362.79 4428.40 7049.85 5396.44 4596.16 7100.31 5460.41 4777.05 7193.19 5079.93 5079.93 7703.46 5049.57 5049.57 7649.60 5021.21 5021.20 7601.05 4997.55 4997.55 7558.43 4978.23 4978.23 7520.33 4963.39 4963.39 7486.43 4953.20 4953.20 7456.80 4946.99 4946.99 7430.77 -1.39 5.25 4.84 -4.84 8.54 4.54 -8.83 12.80 4.51 -12.60 17.03 4.61 -15.94 20.98 4.88 -19.09 24.68 5.27 -23.30 28.65 5.38 -31.57 35.21 4.98 -34.49 34.49 0.00 -27.03 27.03 0.00 -24.07 24.07 0.00 -21.58 21.58 0.00 -18.61 18.61 0.00 -14.91 14.91 0.00 -10.53 10.53 0.00 -5.88 5.88 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 39 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 METE 40 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -6.88 -6.88 22.57 -8.03 -8.02 18.74 -9.10 -9.10 14.55 -9.81 -9.81 10.48 -10.40 -10.40 6.38 -11.05 -11.05 2.11 -11.96 -11.96 -2.45 -13.41 -13.40 -7.50 -15.26 -15.26 -12.90 -17.28 -17.28 -18.49 -19.18 -19.18 -24.15 -20.77 -20.77 -29.67 -22.18 -22.18 -35.04 -23.27 -23.27 -39.95 -23.66 -23.66 -43.61 -23.49 -23.49 -45.62 4939.68 4939.68 7403.78 4930.67 4930.66 7377.00 4920.69 4920.69 7349.55 4915.05 4915.05 7325.72 4914.63 4914.63 7306.17 4919.54 4919.54 7290.83 4929.61 4929.61 7279.37 4943.87 4943.87 7270.77 4956.71 4956.71 7260.30 4965.61 4965.61 7245.66 4972.80 4972.80 7228.72 4983.45 4983.44 7213.38 4998.26 4998.26 7200.00 5017.58 5017.58 7188.80 5042.94 5042.93 7181.56 5076.94 5076.94 7182.22 -4.20 4.20 0.00 -1.99 1.99 0.00 -2.84 2.84 0.00 -3.56 3.56 0.00 -3.76 3.76 0.00 -3.40 3.40 0.00 -2.55 2.55 0.00 -1.62 1.62 0.00 -3.82 3.82 0.00 -5.53 5.53 0.00 -10.39 10.39 0.00 -15.13 15.13 0.00 -19.29 19.29 0.00 -22.77 22.77 0.00 -25.60 25.60 0.00 -28.30 28.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 40 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 METE 41 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -23.80 -23.80 -46.38 -7.16 12.09 50.02 -6.23 10.10 48.36 -5.90 7.61 45.42 -6.21 5.30 41.72 -6.82 3.18 37.65 -7.59 1.22 33.42 -8.42 -0.68 29.13 -9.00 -2.74 24.96 -9.03 -4.67 21.23 -8.99 -6.47 17.49 -9.42 -8.18 13.39 -10.10 -9.53 9.16 -10.78 -10.75 4.88 -11.51 -12.01 0.49 -12.36 -13.50 -4.09 5117.84 5117.84 7194.03 4679.83 5470.76 7695.31 4538.83 5389.03 7546.48 4390.85 5351.09 7435.46 4296.11 5332.11 7365.60 4258.53 5324.03 7329.52 4277.71 5324.52 7324.13 4352.80 5329.63 7346.23 4469.97 5331.56 7384.90 4545.25 5323.42 7397.75 4455.97 5318.97 7338.07 4325.55 5306.64 7256.23 4239.53 5293.91 7193.52 4213.29 5288.80 7160.84 4248.61 5293.94 7159.85 4343.98 5306.71 7187.82 -34.01 34.01 0.00 -41.21 26.37 -13.91 -30.40 19.89 -9.95 -24.97 16.41 -8.14 -21.11 13.87 -6.97 -17.42 11.12 -6.23 -13.52 7.89 -5.80 -9.52 4.29 -5.63 -6.41 1.01 -5.89 -7.19 -0.51 -7.36 -2.26 -2.69 -5.69 -1.25 -2.99 -5.11 -1.22 -2.78 -4.87 -1.15 -2.68 -4.74 -0.88 -2.79 -4.66 -0.59 -2.96 -4.67 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 41 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 METE 42 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -13.09 -15.48 -8.81 -13.44 -17.65 -13.39 -13.93 -19.92 -18.11 -14.87 -22.19 -23.12 -15.95 -24.12 -28.08 -16.80 -25.86 -32.78 -17.26 -27.45 -37.03 -17.29 -29.01 -40.67 -16.82 -30.81 -43.62 -16.33 -32.97 -46.21 -17.52 22.19 49.17 -15.06 18.37 46.59 -13.25 14.41 43.39 -12.29 10.78 39.64 -11.93 7.61 35.62 -11.86 4.76 31.51 4483.61 5319.52 7233.58 4579.21 5325.51 7256.57 4503.42 5335.78 7209.66 4382.81 5336.90 7138.79 4304.75 5334.59 7081.24 4284.67 5335.87 7045.83 4324.95 5344.54 7034.56 4428.40 5362.79 7049.85 4596.16 5396.44 7100.31 4777.05 5460.41 7193.19 4276.83 5857.52 7682.62 3969.57 5671.76 7373.51 3630.10 5594.52 7145.38 3408.00 5571.20 7017.30 3337.46 5580.17 6982.63 3419.83 5612.02 7032.05 -1.28 -2.53 -4.88 -5.90 -0.03 -5.97 -5.25 1.39 -4.84 -8.54 4.84 -4.54 -12.80 8.83 -4.51 -17.03 12.60 -4.61 -20.98 15.94 -4.88 -24.68 19.09 -5.27 -28.65 23.30 -5.38 -35.21 31.57 -4.98 -44.38 16.20 -25.47 -33.27 11.82 -19.86 -26.32 9.22 -16.17 -21.22 6.93 -13.87 -16.77 4.42 -12.40 -12.55 1.56 -11.53 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 42 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 METE 43 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -11.79 2.04 27.40 -11.53 -0.59 23.45 -11.51 -2.83 19.62 -11.45 -4.95 15.76 -11.14 -7.18 11.82 -11.08 -9.22 7.73 -11.18 -11.09 3.56 -11.32 -13.00 -0.70 -11.38 -15.13 -5.04 -11.26 -17.51 -9.38 -11.46 -19.79 -13.70 -11.72 -22.13 -18.09 -11.69 -24.73 -22.55 -11.80 -27.21 -27.01 -11.86 -29.62 -31.34 -11.66 -32.16 -35.49 3644.61 5655.97 7152.50 3954.43 5693.29 7305.92 4148.22 5703.13 7387.83 3946.89 5687.94 7274.62 3632.09 5651.22 7098.30 3407.87 5615.51 6962.35 3334.16 5600.11 6903.84 3421.38 5611.70 6930.03 3659.94 5643.49 7031.52 3989.00 5676.76 7171.08 4199.52 5690.69 7249.73 4002.41 5684.25 7148.51 3682.82 5653.61 6982.46 3449.24 5617.35 6844.08 3362.94 5592.86 6765.48 3437.47 5589.57 6755.58 -8.75 -1.50 -11.21 -6.26 -4.34 -11.68 -6.55 -6.43 -13.39 -1.78 -7.91 -11.21 0.21 -8.50 -10.15 0.90 -8.63 -9.68 1.21 -8.61 -9.44 1.41 -8.52 -9.32 1.23 -8.23 -9.38 -0.28 -7.38 -9.91 -4.57 -5.48 -11.34 -4.35 -3.49 -9.87 -6.98 -0.51 -9.33 -10.97 2.93 -9.29 -15.35 6.42 -9.50 -19.74 9.81 -9.89 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 43 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 METE 44 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -11.01 -35.15 -39.51 -9.77 -38.75 -43.39 -8.06 -42.48 -47.17 -25.84 28.95 47.47 -22.95 24.27 44.30 -20.33 19.32 40.75 -18.47 14.84 36.98 -17.20 10.94 33.14 -16.25 7.47 29.29 -15.37 4.23 25.45 -14.57 1.19 21.64 -14.31 -1.39 17.83 -14.03 -3.87 13.96 -13.21 -6.51 10.11 -12.37 -9.05 6.25 -11.63 -11.46 2.35 3676.15 5612.99 6820.03 4053.82 5673.97 6966.36 4438.53 5803.67 7195.16 3876.64 6238.32 7667.40 3464.70 5941.62 7227.19 2992.85 5803.42 6896.36 2677.48 5758.21 6713.44 2582.57 5776.27 6677.79 2715.00 5841.86 6776.80 3051.66 5938.18 6986.33 3495.74 6034.10 7241.19 3761.36 6078.39 7379.76 3495.82 6035.50 7225.13 3055.94 5950.48 6966.41 2731.41 5876.96 6764.22 2621.92 5846.77 6681.52 -24.14 13.33 -10.37 -28.95 17.78 -10.76 -35.05 25.11 -10.14 -45.02 4.99 -35.63 -35.30 3.92 -28.63 -27.79 2.54 -23.72 -21.78 0.67 -20.52 -16.62 -1.64 -18.48 -12.01 -4.25 -17.21 -8.07 -7.01 -16.67 -5.21 -9.85 -17.03 -3.94 -12.72 -18.60 -0.37 -13.34 -16.32 1.64 -13.85 -15.09 2.65 -14.15 -14.51 3.15 -14.20 -14.22 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 44 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 METE 45 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -10.91 -13.89 -1.61 -10.14 -16.48 -5.64 -9.44 -19.19 -9.74 -9.33 -21.73 -13.90 -9.23 -24.31 -18.07 -8.58 -27.19 -22.21 -7.87 -30.12 -26.30 -7.16 -33.10 -30.34 -6.29 -36.37 -34.41 -5.07 -40.21 -38.60 -3.34 -44.62 -42.93 -1.21 -48.81 -47.00 -31.86 32.06 44.88 -29.19 27.02 41.14 -26.59 21.80 37.29 -24.39 17.12 33.62 2749.11 5869.73 6732.43 3092.69 5935.58 6899.98 3551.87 6013.12 7121.49 3830.41 6051.63 7244.58 3559.96 6011.52 7098.93 3101.48 5925.75 6848.15 2752.08 5841.58 6635.86 2614.64 5788.18 6518.03 2717.00 5779.80 6512.46 3058.78 5824.89 6626.33 3586.71 5935.62 6860.43 4104.69 6142.02 7196.91 3480.68 6613.00 7650.58 3042.89 6231.12 7137.22 2536.46 6029.01 6747.94 2193.50 5950.02 6530.72 3.33 -13.96 -14.06 2.98 -13.42 -14.13 1.61 -12.58 -14.74 -1.32 -11.48 -16.21 -2.61 -8.75 -14.79 -5.55 -5.80 -14.24 -9.57 -2.63 -14.25 -14.14 0.74 -14.50 -18.96 4.28 -14.84 -23.96 7.99 -15.29 -29.28 11.99 -15.90 -34.77 16.52 -16.40 -44.64 -6.02 -44.69 -36.53 -3.52 -36.23 -29.03 -3.61 -30.54 -22.48 -5.15 -26.89 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 45 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 METE 46 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -22.58 13.05 30.13 -20.99 9.40 26.70 -19.51 5.95 23.21 -18.22 2.65 19.59 -17.44 -0.31 15.89 -16.64 -3.20 12.10 -15.27 -6.21 8.38 -13.72 -9.09 4.78 -12.15 -11.84 1.25 -10.59 -14.61 -2.33 -9.06 -17.53 -6.07 -7.74 -20.58 -9.98 -7.03 -23.51 -14.00 -6.30 -26.46 -18.03 -5.07 -29.65 -21.98 -3.72 -32.85 -25.76 2092.57 5965.22 6492.23 2244.98 6056.92 6620.53 2620.15 6205.06 6884.74 3102.86 6366.60 7201.74 3385.06 6450.76 7374.37 3109.86 6371.00 7194.96 2638.74 6225.29 6885.18 2283.89 6107.10 6640.98 2163.34 6060.27 6542.69 2305.46 6096.76 6609.38 2683.72 6203.80 6818.93 3179.18 6338.05 7091.74 3472.37 6409.76 7241.84 3186.97 6328.94 7068.48 2689.58 6178.55 6764.17 2302.32 6043.80 6505.37 -16.76 -7.34 -24.49 -11.71 -9.76 -22.86 -7.32 -12.32 -21.92 -3.67 -15.19 -21.95 -0.76 -18.78 -23.30 1.51 -18.64 -21.01 3.10 -19.06 -19.89 4.10 -19.52 -19.43 4.68 -19.64 -19.18 4.92 -19.28 -18.93 4.73 -18.54 -18.83 3.94 -17.75 -19.30 2.47 -17.38 -20.76 -0.43 -13.99 -19.46 -4.09 -11.02 -19.14 -8.43 -8.03 -19.35 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 46 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 METE 47 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -2.38 -36.08 -29.45 -1.01 -39.59 -33.23 0.56 -43.59 -37.28 2.43 -48.04 -41.57 4.63 -52.25 -45.65 -36.55 31.37 40.42 -34.42 26.58 36.48 -32.27 21.86 32.74 -30.17 17.71 29.52 -28.18 14.06 26.63 -26.22 10.67 23.78 -24.27 7.30 20.75 -22.43 3.84 17.39 -20.92 0.48 13.84 -19.35 -2.87 10.18 -17.30 -6.21 6.64 2147.77 5965.36 6364.58 2262.37 5960.05 6365.66 2642.38 6036.70 6514.80 3219.22 6203.55 6803.97 3773.97 6474.34 7196.62 3088.33 6982.60 7632.37 2696.65 6568.53 7117.81 2246.63 6321.65 6722.72 1940.78 6209.30 6497.26 1852.31 6211.11 6454.10 1992.86 6312.26 6584.81 2332.98 6493.45 6858.82 2765.91 6705.08 7190.12 3017.79 6822.07 7371.85 2778.46 6706.98 7184.30 2362.02 6508.38 6860.48 -13.26 -4.72 -19.64 -18.46 -1.02 -19.82 -23.94 2.82 -20.07 -29.59 6.14 -20.90 -34.96 7.74 -22.99 -44.52 -15.47 -52.57 -37.18 -10.04 -42.54 -29.81 -9.31 -36.62 -23.01 -10.81 -33.04 -16.92 -13.02 -30.55 -11.47 -15.25 -28.54 -6.57 -17.44 -26.99 -2.10 -20.10 -26.40 2.17 -24.14 -27.52 3.37 -23.51 -25.26 4.45 -24.11 -24.56 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 47 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 METE 48 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -15.07 -9.31 3.37 -12.78 -12.24 0.25 -10.48 -15.19 -2.92 -8.21 -18.33 -6.33 -6.12 -21.74 -10.09 -4.52 -25.16 -14.03 -2.92 -28.61 -17.98 -0.99 -32.11 -21.78 0.95 -35.42 -25.27 2.78 -38.61 -28.55 4.48 -41.91 -31.84 6.17 -45.51 -35.38 8.00 -49.52 -39.28 10.13 -53.47 -43.16 -41.34 27.06 33.03 -39.71 23.58 29.96 2046.15 6353.74 6605.86 1940.16 6293.68 6503.91 2071.43 6340.48 6574.58 2414.75 6480.73 6795.08 2860.44 6664.07 7082.70 3123.95 6766.81 7241.59 2874.88 6649.68 7058.75 2433.45 6445.91 6739.17 2088.13 6274.28 6470.13 1952.95 6182.01 6327.88 2063.23 6185.42 6336.81 2414.82 6290.83 6500.11 2942.46 6498.87 6802.11 3444.86 6801.61 7193.79 2697.91 7349.56 7613.21 2413.16 6981.15 7182.13 5.29 -24.90 -24.51 5.88 -25.15 -24.40 6.23 -24.62 -23.98 6.33 -23.53 -23.45 6.19 -22.54 -23.48 5.96 -22.67 -24.94 1.72 -18.84 -23.76 -2.69 -16.12 -23.97 -7.43 -13.51 -24.65 -12.54 -10.32 -25.09 -18.04 -6.44 -25.04 -23.90 -2.32 -24.82 -29.94 0.72 -25.50 -35.72 0.31 -28.87 -44.78 -22.23 -58.45 -37.44 -15.28 -47.46 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 48 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 METE 49 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -38.01 20.26 27.24 -36.17 17.21 24.92 -34.19 14.40 22.83 -32.04 11.55 20.65 -29.70 8.39 18.13 -27.23 4.87 15.13 -24.79 1.10 11.77 -22.23 -2.72 8.27 -19.39 -6.33 5.01 -16.48 -9.61 2.08 -13.56 -12.64 -0.64 -10.59 -15.70 -3.42 -7.55 -19.05 -6.52 -4.53 -22.77 -10.06 -1.77 -26.74 -13.95 0.98 -30.75 -17.87 2089.61 6731.76 6837.43 1870.89 6603.05 6633.35 1808.86 6586.63 6585.35 1911.91 6673.51 6689.47 2158.66 6848.99 6921.94 2472.26 7067.13 7210.61 2657.63 7194.95 7372.92 2489.25 7061.21 7197.79 2194.98 6845.68 6906.43 1973.04 6682.96 6679.99 1902.19 6619.90 6588.77 2002.44 6666.63 6649.12 2255.83 6811.86 6842.44 2583.76 7008.63 7098.86 2783.27 7125.31 7244.55 2611.82 6990.79 7074.29 -30.12 -14.74 -42.18 -23.19 -16.63 -39.17 -16.88 -19.02 -36.82 -11.19 -20.94 -34.39 -5.94 -22.44 -31.96 -0.84 -24.32 -30.28 4.36 -28.32 -30.98 4.84 -27.68 -28.96 5.51 -29.01 -29.18 6.23 -30.44 -29.85 6.85 -30.93 -30.01 7.25 -30.14 -29.31 7.57 -28.38 -28.04 7.98 -26.65 -27.15 8.60 -26.81 -28.38 3.44 -23.02 -27.53 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 49 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 METE 50 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 3.76 -34.54 -21.53 6.32 -37.95 -24.79 8.57 -41.00 -27.72 10.52 -43.89 -30.50 12.25 -46.83 -33.35 13.94 -49.84 -36.33 15.94 -52.96 -39.44 -47.06 20.79 23.50 -45.77 20.19 23.06 -44.46 18.63 21.87 -42.83 16.92 20.65 -40.84 14.80 19.16 -38.52 12.27 17.39 -35.86 9.29 15.28 -32.74 5.60 12.59 -29.12 1.71 9.75 2303.43 6772.16 6787.18 2065.13 6596.83 6550.89 1979.38 6508.97 6430.52 2072.02 6521.24 6445.55 2340.56 6636.36 6595.93 2738.61 6847.82 6862.57 3116.31 7126.20 7189.29 2308.73 7717.91 7595.83 2171.23 7485.54 7334.33 2013.44 7302.62 7105.98 1908.54 7195.22 6961.27 1880.07 7166.68 6914.90 1931.84 7213.79 6966.01 2053.68 7328.88 7102.17 2209.50 7481.49 7279.98 2303.09 7575.02 7381.40 -1.56 -21.12 -28.77 -6.57 -19.22 -30.26 -11.83 -16.34 -31.01 -17.52 -12.24 -30.66 -23.70 -7.53 -29.69 -30.26 -3.83 -29.43 -36.91 -4.85 -33.20 -45.03 -25.09 -60.87 -37.39 -19.31 -51.25 -29.96 -19.87 -47.36 -22.96 -22.85 -45.49 -16.56 -25.51 -43.42 -10.80 -26.99 -40.53 -5.51 -27.33 -36.88 -0.15 -27.72 -33.52 5.47 -30.67 -33.06 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 50 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 METE 51 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -25.29 -2.30 6.77 -21.64 -6.26 3.77 -18.10 -9.72 1.15 -14.53 -13.03 -1.40 -10.87 -16.38 -4.02 -7.09 -19.93 -6.85 -3.03 -24.04 -10.20 1.28 -28.27 -13.69 5.57 -32.56 -17.29 9.29 -36.78 -20.93 12.45 -40.43 -24.18 15.18 -43.73 -27.22 17.48 -46.64 -30.00 19.34 -49.05 -32.36 20.84 -51.03 -34.34 22.53 -51.88 -35.20 2229.82 7464.54 7254.79 2095.01 7299.40 7057.08 1996.86 7176.69 6905.14 1972.52 7127.25 6841.27 2031.54 7156.66 6874.29 2165.62 7258.58 6994.17 2338.08 7401.81 7158.60 2448.87 7490.75 7254.46 2384.68 7381.50 7133.40 2253.82 7216.20 6940.56 2159.17 7088.04 6786.03 2139.62 7026.67 6709.87 2207.44 7038.96 6722.51 2361.54 7125.32 6822.86 2581.26 7275.41 6994.05 2787.87 7451.53 7185.48 5.63 -31.02 -32.07 6.16 -33.78 -33.85 6.96 -36.28 -35.59 7.61 -37.13 -36.09 8.01 -35.97 -35.04 8.29 -33.11 -32.68 8.96 -29.93 -30.21 10.00 -29.12 -30.43 4.42 -26.36 -30.66 -0.84 -25.98 -33.56 -5.82 -25.27 -36.23 -11.07 -22.86 -37.41 -16.82 -18.51 -36.77 -23.20 -12.73 -34.64 -30.32 -7.64 -32.82 -38.17 -6.69 -34.75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 51 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 METE 52 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 -53.39 18.27 17.71 -53.01 19.71 18.99 -52.10 20.46 19.57 -50.55 18.90 18.28 -48.36 16.05 16.08 -45.66 12.68 13.65 -42.58 9.35 11.43 -39.13 6.35 9.71 -33.92 2.43 7.84 -28.48 -1.63 5.88 -24.36 -5.00 3.88 -20.13 -8.97 1.17 -15.72 -13.37 -1.98 -11.20 -17.82 -5.23 -6.63 -21.96 -8.25 -1.90 -25.55 -10.72 1922.04 8096.39 7589.32 1919.46 8067.22 7552.51 1918.58 8048.18 7525.69 1919.22 8032.46 7502.06 1921.60 8017.83 7479.72 1925.97 8003.71 7458.27 1932.42 7990.28 7437.84 1940.61 7977.89 7418.58 1949.11 7967.44 7401.31 1961.72 7950.71 7380.35 1974.99 7935.99 7361.50 1990.70 7922.45 7344.02 2009.57 7909.78 7327.83 2031.85 7897.81 7312.81 2057.45 7886.63 7298.93 2085.82 7876.48 7286.20 -44.58 -24.82 -60.07 -36.83 -21.32 -53.26 -29.32 -24.81 -52.27 -22.34 -29.18 -51.78 -16.00 -32.24 -50.12 -10.30 -33.27 -46.81 -5.15 -32.30 -41.92 -0.21 -30.35 -36.28 5.02 -31.32 -33.81 5.62 -33.62 -34.78 6.56 -38.65 -38.74 7.48 -42.38 -41.65 8.16 -43.61 -42.52 8.52 -42.04 -41.09 8.67 -37.93 -37.53 8.88 -32.44 -32.82 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 52 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT KG ----------------JOINT 417 418 419 420 421 422 423 424 425 1279 1280 1372 1373 1374 METE 53 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 4.70 -29.74 -13.17 11.19 -34.02 -15.80 15.48 -37.86 -18.84 19.30 -42.37 -22.78 22.72 -47.20 -27.23 25.61 -51.75 -31.63 27.87 -55.19 -35.15 29.43 -56.41 -36.62 30.13 -56.45 -36.65 235.88 -186.35 75.02 -186.35 235.88 75.02 -163.06 767.38 -74.42 767.38 -163.06 -74.42 459.74 459.74 43.01 2115.35 7868.31 7275.48 2150.82 7854.39 7261.41 2187.26 7842.22 7249.03 2226.16 7830.63 7237.17 2267.90 7819.15 7225.46 2312.46 7807.48 7213.64 2359.62 7796.06 7201.99 2409.19 7786.78 7192.19 2460.50 7785.51 7190.31 23606.74 16716.85 30357.17 16716.85 23606.73 30357.16 25844.73 16086.03 25076.11 16086.03 25844.73 25076.11 22850.52 22850.51 27379.71 9.53 -29.74 -31.13 4.43 -28.91 -33.28 -0.37 -30.86 -38.43 -5.18 -31.45 -42.33 -10.32 -29.52 -43.92 -15.98 -24.82 -42.91 -22.31 -17.78 -39.49 -29.69 -9.89 -34.90 -38.37 -5.81 -33.57 -117.69 186.07 52.49 -186.07 117.69 -52.49 316.73 1.34 214.00 -1.34 -316.73 -214.00 94.84 -94.84 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -123.38 124.76 0.84 -124.76 123.38 -0.84 -67.69 -49.02 -62.07 49.02 67.69 62.07 -7.11 7.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 53 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 54 ************** END OF LATEST ANALYSIS RESULT ************** 1411. PRINT JOINT DISPLACEMENTS C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 54 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0030 0.0089 -0.0030 -0.0033 0.0088 -0.0032 -0.0034 0.0087 -0.0033 -0.0031 0.0084 -0.0030 -0.0027 0.0081 -0.0027 -0.0021 0.0076 -0.0023 -0.0016 0.0071 -0.0019 -0.0011 0.0065 -0.0016 -0.0004 0.0057 -0.0013 0.0003 0.0047 -0.0010 0.0008 0.0041 -0.0006 0.0015 0.0034 -0.0002 0.0022 0.0026 0.0003 0.0030 0.0019 0.0009 0.0037 0.0011 0.0014 0.0043 0.0003 0.0018 RADIANS) Y-TRANS -1.3494 -0.3203 -1.2649 -1.3445 -0.3199 -1.2588 -1.3414 -0.3198 -1.2543 -1.3387 -0.3199 -1.2503 -1.3363 -0.3203 -1.2466 -1.3340 -0.3210 -1.2430 -1.3317 -0.3221 -1.2396 -1.3296 -0.3234 -1.2364 -1.3279 -0.3249 -1.2336 -1.3251 -0.3270 -1.2301 -1.3227 -0.3292 -1.2269 -1.3204 -0.3318 -1.2240 -1.3183 -0.3349 -1.2213 -1.3163 -0.3386 -1.2188 -1.3144 -0.3429 -1.2165 -1.3127 -0.3476 -1.2144 55 STRUCTURE TYPE = SPACE Z-TRANS -0.0041 -0.0074 -0.0100 -0.0036 -0.0061 -0.0089 -0.0041 -0.0049 -0.0087 -0.0049 -0.0037 -0.0086 -0.0054 -0.0027 -0.0084 -0.0055 -0.0017 -0.0078 -0.0054 -0.0009 -0.0070 -0.0051 0.0000 -0.0060 -0.0052 0.0008 -0.0056 -0.0056 0.0009 -0.0058 -0.0064 0.0011 -0.0065 -0.0071 0.0012 -0.0069 -0.0073 0.0014 -0.0071 -0.0070 0.0014 -0.0068 -0.0063 0.0014 -0.0063 -0.0054 0.0015 -0.0055 X-ROTAN -0.0007 0.0006 0.0000 -0.0010 0.0005 -0.0004 -0.0014 0.0003 -0.0008 -0.0016 0.0001 -0.0011 -0.0017 0.0001 -0.0011 -0.0015 0.0001 -0.0010 -0.0013 0.0003 -0.0007 -0.0009 0.0005 -0.0003 -0.0007 0.0006 0.0000 -0.0009 0.0005 -0.0003 -0.0012 0.0003 -0.0007 -0.0015 0.0002 -0.0009 -0.0016 0.0001 -0.0010 -0.0015 0.0001 -0.0009 -0.0012 0.0003 -0.0007 -0.0009 0.0005 -0.0003 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 Z-ROTAN 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 Page 55 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0050 -0.0008 0.0022 0.0057 -0.0019 0.0026 0.0063 -0.0026 0.0031 0.0071 -0.0032 0.0038 0.0079 -0.0038 0.0045 0.0086 -0.0043 0.0053 0.0092 -0.0046 0.0059 0.0094 -0.0049 0.0061 0.0094 -0.0050 0.0061 -0.0035 0.0078 -0.0039 -0.0034 0.0076 -0.0038 -0.0031 0.0074 -0.0036 -0.0028 0.0071 -0.0034 -0.0025 0.0068 -0.0032 -0.0020 0.0064 -0.0029 -0.0015 0.0060 -0.0025 RADIANS) Y-TRANS -1.3114 -0.3526 -1.2126 -1.3091 -0.3585 -1.2102 -1.3070 -0.3645 -1.2082 -1.3051 -0.3710 -1.2062 -1.3032 -0.3780 -1.2042 -1.3012 -0.3854 -1.2023 -1.2993 -0.3933 -1.2003 -1.2978 -0.4015 -1.1987 -1.2976 -0.4101 -1.1984 -1.2863 -0.3848 -1.2660 -1.2476 -0.3619 -1.2224 -1.2171 -0.3356 -1.1843 -1.1992 -0.3181 -1.1602 -1.1944 -0.3133 -1.1525 -1.2023 -0.3220 -1.1610 -1.2215 -0.3423 -1.1837 56 STRUCTURE TYPE = SPACE Z-TRANS -0.0050 0.0016 -0.0052 -0.0048 0.0007 -0.0055 -0.0051 -0.0001 -0.0064 -0.0052 -0.0009 -0.0071 -0.0049 -0.0017 -0.0073 -0.0041 -0.0027 -0.0072 -0.0030 -0.0037 -0.0066 -0.0016 -0.0049 -0.0058 -0.0010 -0.0064 -0.0056 -0.0042 -0.0075 -0.0101 -0.0032 -0.0062 -0.0085 -0.0033 -0.0050 -0.0079 -0.0038 -0.0038 -0.0076 -0.0043 -0.0028 -0.0072 -0.0045 -0.0018 -0.0068 -0.0046 -0.0009 -0.0061 X-ROTAN -0.0006 0.0006 0.0000 -0.0009 0.0004 -0.0003 -0.0012 0.0002 -0.0007 -0.0015 0.0000 -0.0010 -0.0016 0.0000 -0.0011 -0.0015 0.0000 -0.0010 -0.0013 0.0001 -0.0008 -0.0009 0.0004 -0.0003 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0009 0.0004 -0.0003 -0.0011 0.0001 -0.0006 -0.0012 -0.0001 -0.0007 -0.0012 -0.0002 -0.0007 -0.0011 -0.0001 -0.0006 -0.0009 0.0002 -0.0004 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 -0.0001 0.0000 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0004 0.0001 0.0004 0.0004 0.0003 0.0004 0.0002 0.0002 0.0003 0.0001 0.0001 0.0002 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0002 -0.0002 -0.0002 -0.0003 Page 56 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0009 0.0055 -0.0021 -0.0003 0.0049 -0.0016 0.0004 0.0042 -0.0011 0.0010 0.0036 -0.0006 0.0016 0.0030 -0.0002 0.0022 0.0024 0.0002 0.0027 0.0018 0.0007 0.0033 0.0012 0.0011 0.0040 0.0005 0.0017 0.0047 -0.0002 0.0023 0.0054 -0.0009 0.0029 0.0061 -0.0015 0.0035 0.0067 -0.0021 0.0040 0.0073 -0.0025 0.0045 0.0078 -0.0029 0.0050 0.0082 -0.0032 0.0054 RADIANS) Y-TRANS -1.2469 -0.3682 -1.2133 -1.2625 -0.3838 -1.2302 -1.2441 -0.3716 -1.2091 -1.2166 -0.3492 -1.1762 -1.1961 -0.3328 -1.1509 -1.1879 -0.3288 -1.1402 -1.1928 -0.3386 -1.1457 -1.2098 -0.3609 -1.1657 -1.2336 -0.3897 -1.1931 -1.2485 -0.4081 -1.2091 -1.2302 -0.3974 -1.1889 -1.2027 -0.3756 -1.1568 -1.1813 -0.3599 -1.1310 -1.1711 -0.3566 -1.1183 -1.1732 -0.3679 -1.1204 -1.1876 -0.3936 -1.1371 57 STRUCTURE TYPE = SPACE Z-TRANS -0.0046 0.0000 -0.0056 -0.0051 0.0009 -0.0055 -0.0052 0.0009 -0.0053 -0.0056 0.0010 -0.0056 -0.0060 0.0012 -0.0059 -0.0062 0.0013 -0.0060 -0.0060 0.0013 -0.0058 -0.0055 0.0014 -0.0054 -0.0050 0.0015 -0.0050 -0.0049 0.0017 -0.0051 -0.0044 0.0007 -0.0051 -0.0043 -0.0001 -0.0056 -0.0042 -0.0010 -0.0060 -0.0038 -0.0018 -0.0062 -0.0031 -0.0028 -0.0061 -0.0021 -0.0039 -0.0058 X-ROTAN -0.0007 0.0004 -0.0002 -0.0006 0.0006 0.0000 -0.0007 0.0004 -0.0001 -0.0009 0.0001 -0.0004 -0.0010 -0.0001 -0.0005 -0.0011 -0.0002 -0.0006 -0.0010 -0.0001 -0.0005 -0.0009 0.0001 -0.0004 -0.0007 0.0004 -0.0001 -0.0006 0.0006 0.0000 -0.0007 0.0004 -0.0001 -0.0009 0.0001 -0.0004 -0.0010 -0.0002 -0.0006 -0.0011 -0.0003 -0.0006 -0.0011 -0.0003 -0.0006 -0.0010 -0.0001 -0.0005 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0002 -0.0002 -0.0003 0.0000 0.0000 0.0000 0.0003 0.0002 0.0003 0.0003 0.0002 0.0003 0.0001 0.0001 0.0002 0.0000 0.0000 0.0000 -0.0001 -0.0002 -0.0001 -0.0002 -0.0003 -0.0003 -0.0002 -0.0003 -0.0003 0.0000 0.0000 0.0000 0.0003 0.0002 0.0003 0.0003 0.0002 0.0003 0.0002 0.0001 0.0002 0.0000 0.0000 0.0001 -0.0001 -0.0002 -0.0001 -0.0002 -0.0003 -0.0002 Page 57 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0085 -0.0035 0.0057 0.0086 -0.0038 0.0059 -0.0045 0.0069 -0.0055 -0.0039 0.0066 -0.0050 -0.0034 0.0063 -0.0045 -0.0029 0.0060 -0.0042 -0.0024 0.0057 -0.0038 -0.0019 0.0053 -0.0034 -0.0014 0.0050 -0.0030 -0.0008 0.0045 -0.0025 -0.0002 0.0041 -0.0020 0.0005 0.0037 -0.0014 0.0011 0.0032 -0.0008 0.0016 0.0027 -0.0003 0.0021 0.0023 0.0001 0.0026 0.0018 0.0006 RADIANS) Y-TRANS -1.2126 -0.4302 -1.1657 -1.2419 -0.4646 -1.1976 -1.2249 -0.4497 -1.2689 -1.1635 -0.4022 -1.1970 -1.1220 -0.3483 -1.1396 -1.1005 -0.3118 -1.1056 -1.0978 -0.3015 -1.0976 -1.1123 -0.3187 -1.1149 -1.1415 -0.3598 -1.1537 -1.1779 -0.4120 -1.2018 -1.1992 -0.4429 -1.2288 -1.1769 -0.4149 -1.1996 -1.1409 -0.3658 -1.1511 -1.1138 -0.3288 -1.1133 -1.1033 -0.3170 -1.0981 -1.1111 -0.3337 -1.1082 58 STRUCTURE TYPE = SPACE Z-TRANS -0.0013 -0.0051 -0.0055 -0.0011 -0.0064 -0.0058 -0.0037 -0.0075 -0.0097 -0.0025 -0.0062 -0.0079 -0.0025 -0.0050 -0.0070 -0.0028 -0.0039 -0.0065 -0.0032 -0.0028 -0.0061 -0.0035 -0.0019 -0.0057 -0.0037 -0.0010 -0.0053 -0.0041 -0.0001 -0.0050 -0.0047 0.0007 -0.0052 -0.0046 0.0008 -0.0048 -0.0048 0.0009 -0.0049 -0.0051 0.0010 -0.0050 -0.0052 0.0011 -0.0050 -0.0050 0.0012 -0.0049 X-ROTAN -0.0008 0.0003 -0.0003 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0008 0.0004 -0.0002 -0.0008 0.0002 -0.0003 -0.0008 0.0000 -0.0004 -0.0008 -0.0001 -0.0004 -0.0007 0.0000 -0.0003 -0.0007 0.0002 -0.0002 -0.0006 0.0005 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0002 -0.0002 -0.0007 0.0000 -0.0002 -0.0007 -0.0001 -0.0003 -0.0007 0.0000 -0.0002 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0003 -0.0004 -0.0003 -0.0002 -0.0002 -0.0003 0.0007 0.0003 0.0007 0.0005 0.0006 0.0007 0.0003 0.0005 0.0005 0.0001 0.0002 0.0002 -0.0001 0.0000 -0.0001 -0.0002 -0.0003 -0.0003 -0.0004 -0.0005 -0.0005 -0.0004 -0.0005 -0.0005 0.0000 0.0000 0.0000 0.0004 0.0005 0.0005 0.0003 0.0005 0.0005 0.0002 0.0003 0.0003 0.0000 0.0000 0.0000 -0.0002 -0.0003 -0.0002 Page 58 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0032 0.0013 0.0011 0.0038 0.0008 0.0017 0.0045 0.0003 0.0023 0.0051 -0.0002 0.0030 0.0058 -0.0006 0.0036 0.0063 -0.0011 0.0041 0.0068 -0.0014 0.0046 0.0073 -0.0018 0.0051 0.0078 -0.0020 0.0056 0.0083 -0.0023 0.0061 0.0088 -0.0027 0.0066 -0.0052 0.0061 -0.0067 -0.0044 0.0057 -0.0061 -0.0036 0.0054 -0.0055 -0.0030 0.0050 -0.0049 -0.0023 0.0047 -0.0044 RADIANS) Y-TRANS -1.1353 -0.3760 -1.1404 -1.1681 -0.4306 -1.1831 -1.1876 -0.4639 -1.2074 -1.1651 -0.4353 -1.1790 -1.1287 -0.3839 -1.1312 -1.0995 -0.3442 -1.0918 -1.0848 -0.3299 -1.0718 -1.0869 -0.3453 -1.0743 -1.1061 -0.3901 -1.0993 -1.1413 -0.4564 -1.1438 -1.1877 -0.5194 -1.1982 -1.1638 -0.5147 -1.2721 -1.0948 -0.4494 -1.1863 -1.0536 -0.3744 -1.1205 -1.0349 -0.3235 -1.0829 -1.0352 -0.3087 -1.0757 59 STRUCTURE TYPE = SPACE Z-TRANS -0.0047 0.0013 -0.0047 -0.0044 0.0013 -0.0045 -0.0045 0.0014 -0.0047 -0.0038 0.0006 -0.0046 -0.0035 -0.0003 -0.0048 -0.0032 -0.0011 -0.0050 -0.0027 -0.0020 -0.0052 -0.0020 -0.0029 -0.0051 -0.0013 -0.0040 -0.0049 -0.0006 -0.0050 -0.0049 -0.0008 -0.0062 -0.0055 -0.0026 -0.0074 -0.0088 -0.0017 -0.0062 -0.0071 -0.0016 -0.0050 -0.0061 -0.0018 -0.0038 -0.0055 -0.0022 -0.0028 -0.0051 X-ROTAN -0.0006 0.0002 -0.0002 -0.0006 0.0004 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0004 -0.0001 -0.0006 0.0001 -0.0002 -0.0007 -0.0001 -0.0003 -0.0007 -0.0002 -0.0003 -0.0007 -0.0002 -0.0003 -0.0007 0.0000 -0.0003 -0.0006 0.0003 -0.0002 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0004 -0.0001 -0.0005 0.0002 -0.0001 -0.0005 0.0002 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0003 -0.0005 -0.0004 -0.0003 -0.0005 -0.0004 0.0000 0.0000 0.0000 0.0004 0.0005 0.0005 0.0004 0.0005 0.0005 0.0002 0.0003 0.0003 0.0001 0.0000 0.0001 -0.0001 -0.0003 -0.0001 -0.0003 -0.0006 -0.0004 -0.0004 -0.0007 -0.0005 -0.0005 -0.0005 -0.0005 0.0008 0.0004 0.0009 0.0005 0.0008 0.0008 0.0003 0.0007 0.0005 0.0001 0.0003 0.0002 -0.0001 0.0000 -0.0001 Page 59 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0018 0.0044 -0.0040 -0.0012 0.0040 -0.0035 -0.0006 0.0037 -0.0029 -0.0001 0.0035 -0.0023 0.0005 0.0032 -0.0017 0.0010 0.0029 -0.0011 0.0016 0.0025 -0.0006 0.0020 0.0021 0.0000 0.0025 0.0017 0.0005 0.0031 0.0014 0.0011 0.0036 0.0010 0.0017 0.0042 0.0008 0.0023 0.0048 0.0005 0.0030 0.0054 0.0002 0.0036 0.0059 -0.0002 0.0042 0.0064 -0.0005 0.0048 RADIANS) Y-TRANS -1.0520 -0.3321 -1.0975 -1.0822 -0.3888 -1.1431 -1.1175 -0.4610 -1.1984 -1.1370 -0.5030 -1.2286 -1.1178 -0.4631 -1.1974 -1.0847 -0.3937 -1.1434 -1.0590 -0.3410 -1.1010 -1.0489 -0.3234 -1.0840 -1.0567 -0.3452 -1.0958 -1.0801 -0.4025 -1.1325 -1.1107 -0.4767 -1.1804 -1.1278 -0.5207 -1.2069 -1.1083 -0.4791 -1.1765 -1.0743 -0.4056 -1.1232 -1.0457 -0.3480 -1.0784 -1.0303 -0.3255 -1.0546 60 STRUCTURE TYPE = SPACE Z-TRANS -0.0025 -0.0019 -0.0048 -0.0029 -0.0011 -0.0045 -0.0034 -0.0003 -0.0044 -0.0040 0.0004 -0.0046 -0.0039 0.0006 -0.0042 -0.0040 0.0007 -0.0041 -0.0042 0.0009 -0.0041 -0.0042 0.0010 -0.0041 -0.0041 0.0010 -0.0040 -0.0039 0.0011 -0.0039 -0.0038 0.0010 -0.0039 -0.0038 0.0010 -0.0042 -0.0031 0.0003 -0.0040 -0.0027 -0.0004 -0.0040 -0.0023 -0.0012 -0.0041 -0.0017 -0.0021 -0.0042 X-ROTAN -0.0005 0.0003 -0.0001 -0.0005 0.0004 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0005 0.0004 0.0000 -0.0005 0.0002 0.0000 -0.0004 0.0002 0.0000 -0.0005 0.0002 0.0000 -0.0005 0.0003 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0003 0.0000 -0.0004 0.0002 0.0000 -0.0004 0.0001 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0002 -0.0004 -0.0004 -0.0004 -0.0007 -0.0005 -0.0003 -0.0007 -0.0005 0.0000 0.0000 0.0000 0.0003 0.0007 0.0005 0.0003 0.0007 0.0005 0.0002 0.0004 0.0003 0.0000 0.0000 0.0000 -0.0002 -0.0004 -0.0003 -0.0003 -0.0007 -0.0005 -0.0003 -0.0007 -0.0005 0.0000 0.0000 0.0000 0.0003 0.0007 0.0005 0.0003 0.0007 0.0005 0.0002 0.0004 0.0004 0.0001 0.0000 0.0001 Page 60 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0070 -0.0007 0.0053 0.0076 -0.0010 0.0059 0.0083 -0.0013 0.0065 0.0089 -0.0017 0.0072 -0.0053 0.0053 -0.0075 -0.0045 0.0049 -0.0069 -0.0036 0.0044 -0.0062 -0.0029 0.0041 -0.0056 -0.0022 0.0038 -0.0050 -0.0016 0.0035 -0.0045 -0.0010 0.0033 -0.0039 -0.0004 0.0030 -0.0033 0.0001 0.0029 -0.0026 0.0005 0.0028 -0.0020 0.0010 0.0025 -0.0014 0.0015 0.0023 -0.0008 RADIANS) Y-TRANS -1.0309 -0.3439 -1.0561 -1.0485 -0.4025 -1.0834 -1.0831 -0.4904 -1.1337 -1.1336 -0.5741 -1.1990 -1.1022 -0.5801 -1.2751 -1.0385 -0.5071 -1.1895 -1.0048 -0.4227 -1.1247 -0.9917 -0.3656 -1.0885 -0.9942 -0.3488 -1.0820 -1.0095 -0.3742 -1.1034 -1.0342 -0.4367 -1.1475 -1.0611 -0.5171 -1.2003 -1.0751 -0.5642 -1.2291 -1.0618 -0.5183 -1.1992 -1.0375 -0.4398 -1.1475 -1.0179 -0.3806 -1.1068 61 STRUCTURE TYPE = SPACE Z-TRANS -0.0011 -0.0030 -0.0042 -0.0004 -0.0040 -0.0041 0.0001 -0.0050 -0.0043 0.0001 -0.0060 -0.0048 -0.0010 -0.0074 -0.0074 -0.0006 -0.0061 -0.0060 -0.0006 -0.0048 -0.0051 -0.0009 -0.0037 -0.0045 -0.0012 -0.0028 -0.0041 -0.0016 -0.0020 -0.0038 -0.0021 -0.0012 -0.0037 -0.0025 -0.0006 -0.0037 -0.0031 -0.0001 -0.0039 -0.0031 0.0003 -0.0035 -0.0032 0.0005 -0.0033 -0.0033 0.0007 -0.0032 X-ROTAN -0.0004 0.0001 -0.0001 -0.0005 0.0002 -0.0001 -0.0005 0.0004 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0007 0.0000 -0.0005 0.0006 0.0001 -0.0004 0.0006 0.0002 -0.0004 0.0006 0.0002 -0.0003 0.0006 0.0002 -0.0004 0.0006 0.0002 -0.0004 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0001 -0.0004 0.0006 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0001 -0.0004 -0.0001 -0.0003 -0.0008 -0.0004 -0.0004 -0.0010 -0.0006 -0.0006 -0.0006 -0.0007 0.0008 0.0004 0.0009 0.0005 0.0009 0.0008 0.0002 0.0008 0.0005 0.0000 0.0004 0.0002 -0.0001 0.0000 -0.0001 -0.0002 -0.0005 -0.0003 -0.0003 -0.0008 -0.0005 -0.0002 -0.0008 -0.0005 0.0000 0.0000 0.0000 0.0002 0.0008 0.0005 0.0002 0.0007 0.0005 0.0001 0.0004 0.0003 Page 61 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0020 0.0020 -0.0002 0.0024 0.0018 0.0004 0.0029 0.0015 0.0010 0.0034 0.0013 0.0017 0.0039 0.0012 0.0023 0.0044 0.0011 0.0030 0.0049 0.0008 0.0037 0.0055 0.0006 0.0043 0.0060 0.0004 0.0049 0.0066 0.0002 0.0055 0.0073 -0.0001 0.0062 0.0080 -0.0004 0.0069 0.0087 -0.0008 0.0076 -0.0048 0.0043 -0.0079 -0.0040 0.0038 -0.0074 -0.0032 0.0034 -0.0068 RADIANS) Y-TRANS -1.0100 -0.3606 -1.0904 -1.0161 -0.3842 -1.1016 -1.0340 -0.4473 -1.1365 -1.0563 -0.5299 -1.1820 -1.0683 -0.5787 -1.2070 -1.0548 -0.5312 -1.1781 -1.0298 -0.4483 -1.1274 -1.0073 -0.3837 -1.0842 -0.9942 -0.3580 -1.0608 -0.9933 -0.3771 -1.0609 -1.0061 -0.4404 -1.0858 -1.0339 -0.5365 -1.1340 -1.0791 -0.6290 -1.1994 -1.0397 -0.6461 -1.2779 -0.9903 -0.5775 -1.2045 -0.9672 -0.4988 -1.1494 62 STRUCTURE TYPE = SPACE Z-TRANS -0.0033 0.0008 -0.0032 -0.0032 0.0008 -0.0032 -0.0031 0.0008 -0.0031 -0.0030 0.0007 -0.0032 -0.0029 0.0004 -0.0035 -0.0023 -0.0001 -0.0032 -0.0018 -0.0007 -0.0032 -0.0013 -0.0014 -0.0032 -0.0008 -0.0022 -0.0033 -0.0002 -0.0031 -0.0033 0.0005 -0.0040 -0.0033 0.0010 -0.0049 -0.0035 0.0013 -0.0058 -0.0038 0.0008 -0.0075 -0.0059 0.0007 -0.0059 -0.0048 0.0004 -0.0046 -0.0040 X-ROTAN -0.0004 0.0006 0.0002 -0.0004 0.0006 0.0001 -0.0004 0.0006 0.0001 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0004 0.0005 0.0001 -0.0003 0.0005 0.0001 -0.0003 0.0005 0.0002 -0.0003 0.0005 0.0002 -0.0004 0.0005 0.0001 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0007 0.0001 -0.0005 0.0008 0.0002 -0.0003 0.0009 0.0003 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 -0.0001 -0.0005 -0.0002 -0.0002 -0.0008 -0.0004 -0.0002 -0.0008 -0.0004 0.0000 0.0000 0.0000 0.0002 0.0008 0.0005 0.0003 0.0008 0.0005 0.0002 0.0005 0.0003 0.0001 0.0000 0.0001 -0.0001 -0.0004 -0.0001 -0.0002 -0.0008 -0.0004 -0.0004 -0.0010 -0.0006 -0.0005 -0.0007 -0.0007 0.0007 0.0004 0.0008 0.0003 0.0008 0.0007 0.0001 0.0007 0.0004 Page 62 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0025 0.0031 -0.0062 -0.0018 0.0029 -0.0055 -0.0012 0.0027 -0.0049 -0.0007 0.0026 -0.0042 -0.0002 0.0024 -0.0036 0.0002 0.0024 -0.0030 0.0006 0.0023 -0.0023 0.0011 0.0022 -0.0017 0.0015 0.0021 -0.0010 0.0019 0.0019 -0.0004 0.0023 0.0018 0.0003 0.0027 0.0017 0.0009 0.0032 0.0016 0.0016 0.0036 0.0016 0.0023 0.0041 0.0015 0.0030 0.0045 0.0014 0.0037 RADIANS) Y-TRANS -0.9597 -0.4462 -1.1189 -0.9627 -0.4304 -1.1130 -0.9736 -0.4525 -1.1295 -0.9897 -0.5086 -1.1644 -1.0057 -0.5826 -1.2069 -1.0131 -0.6269 -1.2300 -1.0059 -0.5826 -1.2042 -0.9917 -0.5093 -1.1611 -0.9795 -0.4552 -1.1274 -0.9745 -0.4370 -1.1136 -0.9783 -0.4582 -1.1221 -0.9893 -0.5154 -1.1500 -1.0022 -0.5920 -1.1869 -1.0086 -0.6384 -1.2074 -1.0019 -0.5933 -1.1832 -0.9876 -0.5169 -1.1414 63 STRUCTURE TYPE = SPACE Z-TRANS 0.0001 -0.0036 -0.0034 -0.0003 -0.0028 -0.0031 -0.0007 -0.0020 -0.0029 -0.0012 -0.0013 -0.0028 -0.0016 -0.0009 -0.0028 -0.0021 -0.0007 -0.0031 -0.0022 -0.0001 -0.0027 -0.0023 0.0003 -0.0025 -0.0024 0.0004 -0.0024 -0.0024 0.0005 -0.0024 -0.0023 0.0006 -0.0023 -0.0022 0.0005 -0.0024 -0.0021 0.0003 -0.0025 -0.0019 -0.0002 -0.0027 -0.0015 -0.0004 -0.0025 -0.0010 -0.0009 -0.0024 X-ROTAN -0.0003 0.0010 0.0004 -0.0003 0.0010 0.0004 -0.0004 0.0010 0.0004 -0.0004 0.0009 0.0002 -0.0006 0.0007 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0007 0.0001 -0.0005 0.0008 0.0002 -0.0004 0.0009 0.0003 -0.0004 0.0010 0.0003 -0.0004 0.0009 0.0003 -0.0005 0.0008 0.0002 -0.0006 0.0007 0.0001 -0.0006 0.0006 0.0000 -0.0005 0.0007 0.0001 -0.0004 0.0008 0.0002 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0004 0.0002 -0.0001 0.0000 -0.0001 -0.0001 -0.0004 -0.0003 -0.0002 -0.0007 -0.0004 -0.0001 -0.0007 -0.0004 0.0000 0.0000 0.0000 0.0001 0.0007 0.0004 0.0001 0.0007 0.0004 0.0001 0.0004 0.0002 0.0000 0.0000 0.0000 -0.0001 -0.0004 -0.0002 -0.0001 -0.0007 -0.0004 -0.0001 -0.0008 -0.0004 0.0000 0.0000 0.0000 0.0001 0.0007 0.0004 0.0002 0.0007 0.0004 Page 63 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0050 0.0013 0.0044 0.0055 0.0012 0.0051 0.0061 0.0010 0.0057 0.0067 0.0008 0.0064 0.0074 0.0006 0.0072 0.0081 0.0002 0.0078 -0.0037 0.0029 -0.0082 -0.0031 0.0025 -0.0078 -0.0024 0.0022 -0.0072 -0.0018 0.0020 -0.0066 -0.0013 0.0020 -0.0059 -0.0008 0.0020 -0.0053 -0.0003 0.0020 -0.0046 0.0001 0.0019 -0.0039 0.0005 0.0019 -0.0033 0.0008 0.0019 -0.0026 RADIANS) Y-TRANS -0.9736 -0.4587 -1.1060 -0.9647 -0.4358 -1.0863 -0.9633 -0.4528 -1.0854 -0.9708 -0.5098 -1.1044 -0.9893 -0.5978 -1.1434 -1.0237 -0.6841 -1.1995 -0.9763 -0.7128 -1.2804 -0.9453 -0.6616 -1.2289 -0.9324 -0.6050 -1.1909 -0.9285 -0.5680 -1.1695 -0.9300 -0.5562 -1.1638 -0.9353 -0.5700 -1.1720 -0.9427 -0.6074 -1.1921 -0.9489 -0.6591 -1.2177 -0.9505 -0.6914 -1.2313 -0.9480 -0.6578 -1.2124 64 STRUCTURE TYPE = SPACE Z-TRANS -0.0004 -0.0016 -0.0024 0.0001 -0.0024 -0.0024 0.0007 -0.0032 -0.0025 0.0013 -0.0040 -0.0025 0.0020 -0.0049 -0.0026 0.0028 -0.0058 -0.0027 0.0027 -0.0074 -0.0042 0.0020 -0.0055 -0.0033 0.0015 -0.0044 -0.0027 0.0012 -0.0035 -0.0023 0.0007 -0.0028 -0.0021 0.0003 -0.0021 -0.0019 -0.0003 -0.0015 -0.0019 -0.0007 -0.0010 -0.0019 -0.0011 -0.0011 -0.0022 -0.0013 -0.0003 -0.0019 X-ROTAN -0.0003 0.0010 0.0003 -0.0003 0.0010 0.0003 -0.0003 0.0010 0.0003 -0.0003 0.0009 0.0003 -0.0004 0.0007 0.0001 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0001 -0.0005 0.0009 0.0003 -0.0004 0.0012 0.0005 -0.0003 0.0014 0.0006 -0.0004 0.0015 0.0006 -0.0004 0.0014 0.0005 -0.0005 0.0011 0.0003 -0.0006 0.0008 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0008 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0001 0.0004 0.0003 0.0001 0.0000 0.0001 0.0000 -0.0004 -0.0001 -0.0001 -0.0008 -0.0003 -0.0003 -0.0010 -0.0005 -0.0005 -0.0006 -0.0006 0.0005 0.0003 0.0005 0.0002 0.0006 0.0005 0.0001 0.0005 0.0003 0.0000 0.0002 0.0001 0.0000 0.0000 0.0000 -0.0001 -0.0003 -0.0001 -0.0001 -0.0005 -0.0002 0.0000 -0.0005 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0005 0.0003 Page 64 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0012 0.0019 -0.0020 0.0015 0.0018 -0.0013 0.0018 0.0019 -0.0006 0.0022 0.0019 0.0001 0.0025 0.0019 0.0008 0.0029 0.0019 0.0016 0.0033 0.0019 0.0023 0.0037 0.0020 0.0030 0.0041 0.0019 0.0038 0.0045 0.0020 0.0045 0.0049 0.0020 0.0052 0.0054 0.0019 0.0059 0.0059 0.0018 0.0066 0.0065 0.0016 0.0072 0.0071 0.0013 0.0079 -0.0020 0.0012 -0.0083 RADIANS) Y-TRANS -0.9419 -0.6053 -1.1830 -0.9359 -0.5680 -1.1604 -0.9334 -0.5557 -1.1506 -0.9353 -0.5702 -1.1550 -0.9406 -0.6100 -1.1719 -0.9461 -0.6648 -1.1952 -0.9484 -0.6999 -1.2083 -0.9474 -0.6671 -1.1914 -0.9423 -0.6138 -1.1637 -0.9362 -0.5749 -1.1407 -0.9321 -0.5605 -1.1276 -0.9316 -0.5729 -1.1259 -0.9355 -0.6127 -1.1367 -0.9457 -0.6756 -1.1611 -0.9673 -0.7398 -1.1992 -0.9118 -0.7800 -1.2826 65 STRUCTURE TYPE = SPACE Z-TRANS -0.0014 0.0000 -0.0017 -0.0014 0.0001 -0.0016 -0.0014 0.0002 -0.0016 -0.0014 0.0002 -0.0016 -0.0014 0.0002 -0.0016 -0.0012 0.0000 -0.0017 -0.0009 -0.0008 -0.0019 -0.0006 -0.0007 -0.0016 -0.0001 -0.0012 -0.0016 0.0005 -0.0018 -0.0015 0.0011 -0.0026 -0.0016 0.0016 -0.0033 -0.0016 0.0022 -0.0040 -0.0017 0.0030 -0.0048 -0.0018 0.0042 -0.0058 -0.0017 0.0044 -0.0069 -0.0023 X-ROTAN -0.0005 0.0011 0.0003 -0.0005 0.0013 0.0004 -0.0005 0.0014 0.0004 -0.0005 0.0013 0.0004 -0.0005 0.0011 0.0003 -0.0006 0.0008 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0008 0.0001 -0.0005 0.0011 0.0003 -0.0004 0.0014 0.0004 -0.0004 0.0015 0.0005 -0.0004 0.0014 0.0005 -0.0004 0.0012 0.0004 -0.0004 0.0008 0.0002 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 Z-ROTAN 0.0001 0.0005 0.0003 0.0000 0.0003 0.0002 0.0000 0.0000 0.0000 0.0000 -0.0003 -0.0001 -0.0001 -0.0005 -0.0002 0.0000 -0.0006 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0005 0.0003 0.0001 0.0005 0.0003 0.0001 0.0003 0.0002 0.0000 0.0000 0.0001 0.0000 -0.0003 0.0000 -0.0001 -0.0005 -0.0002 -0.0001 -0.0007 -0.0003 -0.0003 -0.0005 -0.0004 0.0002 0.0001 0.0003 Page 65 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0017 0.0010 -0.0081 -0.0013 0.0010 -0.0076 -0.0009 0.0010 -0.0070 -0.0005 0.0011 -0.0063 -0.0002 0.0013 -0.0056 0.0001 0.0014 -0.0049 0.0005 0.0015 -0.0042 0.0008 0.0015 -0.0035 0.0011 0.0015 -0.0029 0.0014 0.0016 -0.0022 0.0016 0.0017 -0.0015 0.0018 0.0018 -0.0008 0.0020 0.0019 -0.0001 0.0023 0.0021 0.0007 0.0026 0.0022 0.0015 0.0029 0.0022 0.0022 RADIANS) Y-TRANS -0.8982 -0.7565 -1.2577 -0.8918 -0.7318 -1.2392 -0.8887 -0.7160 -1.2276 -0.8873 -0.7098 -1.2216 -0.8874 -0.7130 -1.2207 -0.8883 -0.7255 -1.2244 -0.8886 -0.7450 -1.2308 -0.8872 -0.7575 -1.2330 -0.8865 -0.7427 -1.2230 -0.8844 -0.7209 -1.2094 -0.8823 -0.7066 -1.1989 -0.8815 -0.7022 -1.1935 -0.8823 -0.7081 -1.1933 -0.8845 -0.7240 -1.1980 -0.8866 -0.7473 -1.2056 -0.8876 -0.7632 -1.2094 66 STRUCTURE TYPE = SPACE Z-TRANS 0.0033 -0.0051 -0.0017 0.0027 -0.0042 -0.0014 0.0023 -0.0035 -0.0012 0.0019 -0.0029 -0.0010 0.0013 -0.0023 -0.0010 0.0007 -0.0016 -0.0009 0.0002 -0.0011 -0.0010 -0.0001 -0.0012 -0.0012 -0.0004 -0.0004 -0.0009 -0.0005 -0.0002 -0.0009 -0.0005 -0.0002 -0.0008 -0.0004 -0.0002 -0.0008 -0.0005 -0.0001 -0.0008 -0.0005 -0.0001 -0.0008 -0.0004 -0.0002 -0.0008 0.0000 -0.0010 -0.0010 X-ROTAN -0.0005 0.0010 0.0003 -0.0005 0.0013 0.0005 -0.0005 0.0015 0.0005 -0.0005 0.0015 0.0005 -0.0005 0.0014 0.0005 -0.0006 0.0012 0.0003 -0.0006 0.0009 0.0001 -0.0006 0.0007 0.0000 -0.0006 0.0009 0.0001 -0.0006 0.0012 0.0003 -0.0006 0.0014 0.0004 -0.0006 0.0015 0.0004 -0.0006 0.0014 0.0004 -0.0006 0.0012 0.0002 -0.0006 0.0008 0.0001 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0001 0.0003 0.0002 0.0000 0.0002 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0002 -0.0001 0.0000 -0.0002 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0002 0.0001 0.0000 0.0002 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0002 -0.0001 0.0000 -0.0002 -0.0001 0.0000 0.0000 0.0000 Page 66 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0033 0.0023 0.0030 0.0037 0.0025 0.0039 0.0040 0.0027 0.0047 0.0043 0.0028 0.0055 0.0046 0.0029 0.0062 0.0048 0.0029 0.0068 0.0051 0.0028 0.0073 0.0055 0.0027 0.0077 -0.0004 -0.0004 -0.0086 -0.0003 -0.0003 -0.0084 -0.0001 -0.0001 -0.0079 0.0001 0.0001 -0.0072 0.0004 0.0004 -0.0065 0.0005 0.0005 -0.0058 0.0007 0.0007 -0.0051 0.0009 0.0009 -0.0044 RADIANS) Y-TRANS -0.8893 -0.7506 -1.2016 -0.8895 -0.7305 -1.1898 -0.8891 -0.7175 -1.1802 -0.8893 -0.7141 -1.1743 -0.8908 -0.7208 -1.1724 -0.8938 -0.7381 -1.1750 -0.8994 -0.7660 -1.1834 -0.9101 -0.7962 -1.1989 -0.8467 -0.8467 -1.2839 -0.8416 -0.8416 -1.2749 -0.8369 -0.8369 -1.2668 -0.8329 -0.8329 -1.2597 -0.8297 -0.8297 -1.2534 -0.8272 -0.8272 -1.2477 -0.8255 -0.8255 -1.2428 -0.8245 -0.8245 -1.2385 67 STRUCTURE TYPE = SPACE Z-TRANS 0.0002 -0.0009 -0.0008 0.0008 -0.0014 -0.0008 0.0015 -0.0021 -0.0008 0.0021 -0.0028 -0.0008 0.0027 -0.0035 -0.0008 0.0032 -0.0041 -0.0009 0.0039 -0.0048 -0.0009 0.0053 -0.0059 -0.0008 0.0057 -0.0057 0.0000 0.0045 -0.0045 0.0000 0.0040 -0.0040 0.0000 0.0036 -0.0036 0.0000 0.0031 -0.0031 0.0000 0.0025 -0.0025 0.0000 0.0018 -0.0018 0.0000 0.0010 -0.0010 0.0000 X-ROTAN -0.0006 0.0008 0.0001 -0.0006 0.0012 0.0002 -0.0005 0.0014 0.0004 -0.0005 0.0015 0.0004 -0.0005 0.0015 0.0004 -0.0005 0.0013 0.0004 -0.0005 0.0009 0.0002 -0.0006 0.0006 0.0000 -0.0007 0.0007 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0007 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0002 0.0001 0.0000 0.0002 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0002 0.0000 -0.0001 -0.0003 -0.0001 -0.0001 -0.0002 -0.0002 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 Page 67 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0011 0.0011 -0.0038 0.0013 0.0013 -0.0031 0.0015 0.0015 -0.0024 0.0016 0.0016 -0.0017 0.0017 0.0017 -0.0011 0.0018 0.0018 -0.0004 0.0020 0.0020 0.0004 0.0022 0.0022 0.0012 0.0025 0.0025 0.0022 0.0029 0.0029 0.0031 0.0032 0.0032 0.0040 0.0035 0.0035 0.0049 0.0037 0.0037 0.0058 0.0039 0.0039 0.0067 0.0039 0.0039 0.0073 0.0039 0.0039 0.0076 RADIANS) Y-TRANS -0.8233 -0.8233 -1.2340 -0.8218 -0.8218 -1.2295 -0.8201 -0.8201 -1.2249 -0.8192 -0.8192 -1.2210 -0.8191 -0.8191 -1.2177 -0.8199 -0.8199 -1.2151 -0.8216 -0.8216 -1.2132 -0.8240 -0.8240 -1.2118 -0.8261 -0.8261 -1.2100 -0.8276 -0.8276 -1.2076 -0.8288 -0.8288 -1.2048 -0.8306 -0.8306 -1.2022 -0.8330 -0.8330 -1.2000 -0.8363 -0.8363 -1.1981 -0.8405 -0.8405 -1.1969 -0.8462 -0.8462 -1.1970 68 STRUCTURE TYPE = SPACE Z-TRANS 0.0007 -0.0007 0.0000 0.0003 -0.0003 0.0000 0.0005 -0.0005 0.0000 0.0006 -0.0006 0.0000 0.0006 -0.0006 0.0000 0.0006 -0.0006 0.0000 0.0004 -0.0004 0.0000 0.0003 -0.0003 0.0000 0.0006 -0.0006 0.0000 0.0009 -0.0009 0.0000 0.0017 -0.0017 0.0000 0.0025 -0.0025 0.0000 0.0032 -0.0032 0.0000 0.0038 -0.0038 0.0000 0.0043 -0.0043 0.0000 0.0047 -0.0047 0.0000 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0007 0.0000 -0.0007 0.0007 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 Page 68 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0040 0.0040 0.0077 0.0012 -0.0020 -0.0083 0.0010 -0.0017 -0.0081 0.0010 -0.0013 -0.0076 0.0010 -0.0009 -0.0070 0.0011 -0.0005 -0.0063 0.0013 -0.0002 -0.0056 0.0014 0.0001 -0.0049 0.0015 0.0005 -0.0042 0.0015 0.0008 -0.0035 0.0015 0.0011 -0.0029 0.0016 0.0014 -0.0022 0.0017 0.0016 -0.0015 0.0018 0.0018 -0.0008 0.0019 0.0020 -0.0001 0.0021 0.0023 0.0007 RADIANS) Y-TRANS -0.8530 -0.8530 -1.1990 -0.7800 -0.9118 -1.2826 -0.7565 -0.8982 -1.2577 -0.7318 -0.8918 -1.2392 -0.7160 -0.8887 -1.2276 -0.7098 -0.8873 -1.2216 -0.7130 -0.8874 -1.2207 -0.7255 -0.8883 -1.2244 -0.7450 -0.8886 -1.2308 -0.7575 -0.8872 -1.2330 -0.7427 -0.8865 -1.2230 -0.7209 -0.8844 -1.2094 -0.7066 -0.8823 -1.1989 -0.7022 -0.8815 -1.1935 -0.7081 -0.8823 -1.1933 -0.7240 -0.8845 -1.1980 69 STRUCTURE TYPE = SPACE Z-TRANS 0.0057 -0.0057 0.0000 0.0069 -0.0044 0.0023 0.0051 -0.0033 0.0017 0.0042 -0.0027 0.0014 0.0035 -0.0023 0.0012 0.0029 -0.0019 0.0010 0.0023 -0.0013 0.0010 0.0016 -0.0007 0.0009 0.0011 -0.0002 0.0010 0.0012 0.0001 0.0012 0.0004 0.0004 0.0009 0.0002 0.0005 0.0009 0.0002 0.0005 0.0008 0.0002 0.0004 0.0008 0.0001 0.0005 0.0008 0.0001 0.0005 0.0008 X-ROTAN -0.0006 0.0006 0.0000 -0.0007 0.0006 -0.0001 -0.0010 0.0005 -0.0003 -0.0013 0.0005 -0.0005 -0.0015 0.0005 -0.0005 -0.0015 0.0005 -0.0005 -0.0014 0.0005 -0.0005 -0.0012 0.0006 -0.0003 -0.0009 0.0006 -0.0001 -0.0007 0.0006 0.0000 -0.0009 0.0006 -0.0001 -0.0012 0.0006 -0.0003 -0.0014 0.0006 -0.0004 -0.0015 0.0006 -0.0004 -0.0014 0.0006 -0.0004 -0.0012 0.0006 -0.0002 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0001 -0.0001 0.0000 0.0001 0.0002 0.0003 0.0003 0.0001 0.0002 0.0002 0.0000 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0002 0.0000 -0.0001 -0.0002 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0002 0.0000 0.0001 0.0002 0.0000 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0002 0.0000 -0.0001 Page 69 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0022 0.0026 0.0015 0.0022 0.0029 0.0022 0.0023 0.0033 0.0030 0.0025 0.0037 0.0039 0.0027 0.0040 0.0047 0.0028 0.0043 0.0055 0.0029 0.0046 0.0062 0.0029 0.0048 0.0068 0.0028 0.0051 0.0073 0.0027 0.0055 0.0077 0.0029 -0.0037 -0.0082 0.0025 -0.0031 -0.0078 0.0022 -0.0024 -0.0072 0.0020 -0.0018 -0.0066 0.0020 -0.0013 -0.0059 0.0020 -0.0008 -0.0053 RADIANS) Y-TRANS -0.7473 -0.8866 -1.2056 -0.7632 -0.8876 -1.2094 -0.7506 -0.8893 -1.2016 -0.7305 -0.8895 -1.1898 -0.7175 -0.8891 -1.1802 -0.7141 -0.8893 -1.1743 -0.7208 -0.8908 -1.1724 -0.7381 -0.8938 -1.1750 -0.7660 -0.8994 -1.1834 -0.7962 -0.9101 -1.1989 -0.7128 -0.9763 -1.2804 -0.6616 -0.9453 -1.2289 -0.6050 -0.9324 -1.1909 -0.5680 -0.9285 -1.1695 -0.5562 -0.9300 -1.1638 -0.5700 -0.9353 -1.1720 70 STRUCTURE TYPE = SPACE Z-TRANS 0.0002 0.0004 0.0008 0.0010 0.0000 0.0010 0.0009 -0.0002 0.0008 0.0014 -0.0008 0.0008 0.0021 -0.0015 0.0008 0.0028 -0.0021 0.0008 0.0035 -0.0027 0.0008 0.0041 -0.0032 0.0009 0.0048 -0.0039 0.0009 0.0059 -0.0053 0.0008 0.0074 -0.0027 0.0042 0.0055 -0.0020 0.0033 0.0044 -0.0015 0.0027 0.0035 -0.0012 0.0023 0.0028 -0.0007 0.0021 0.0021 -0.0003 0.0019 X-ROTAN -0.0008 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0008 0.0006 -0.0001 -0.0012 0.0006 -0.0002 -0.0014 0.0005 -0.0004 -0.0015 0.0005 -0.0004 -0.0015 0.0005 -0.0004 -0.0013 0.0005 -0.0004 -0.0009 0.0005 -0.0002 -0.0006 0.0006 0.0000 -0.0007 0.0006 -0.0001 -0.0009 0.0005 -0.0003 -0.0012 0.0004 -0.0005 -0.0014 0.0003 -0.0006 -0.0015 0.0004 -0.0006 -0.0014 0.0004 -0.0005 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0002 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0002 0.0000 0.0001 0.0002 0.0000 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0002 0.0000 0.0000 -0.0003 -0.0001 -0.0001 -0.0002 -0.0001 -0.0002 0.0003 0.0005 0.0005 0.0006 0.0002 0.0005 0.0005 0.0001 0.0003 0.0002 0.0000 0.0001 0.0000 0.0000 0.0000 -0.0003 -0.0001 -0.0001 Page 70 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0020 -0.0003 -0.0046 0.0019 0.0001 -0.0039 0.0019 0.0005 -0.0033 0.0019 0.0008 -0.0026 0.0019 0.0012 -0.0020 0.0018 0.0015 -0.0013 0.0019 0.0018 -0.0006 0.0019 0.0022 0.0001 0.0019 0.0025 0.0008 0.0019 0.0029 0.0016 0.0019 0.0033 0.0023 0.0020 0.0037 0.0030 0.0019 0.0041 0.0038 0.0020 0.0045 0.0045 0.0020 0.0049 0.0052 0.0019 0.0054 0.0059 RADIANS) Y-TRANS -0.6074 -0.9427 -1.1921 -0.6591 -0.9489 -1.2177 -0.6914 -0.9505 -1.2313 -0.6578 -0.9480 -1.2124 -0.6053 -0.9419 -1.1830 -0.5680 -0.9359 -1.1604 -0.5557 -0.9334 -1.1506 -0.5702 -0.9353 -1.1550 -0.6100 -0.9406 -1.1719 -0.6648 -0.9461 -1.1952 -0.6999 -0.9484 -1.2083 -0.6671 -0.9474 -1.1914 -0.6138 -0.9423 -1.1637 -0.5749 -0.9362 -1.1407 -0.5605 -0.9321 -1.1276 -0.5729 -0.9316 -1.1259 71 STRUCTURE TYPE = SPACE Z-TRANS 0.0015 0.0003 0.0019 0.0010 0.0007 0.0019 0.0011 0.0011 0.0022 0.0003 0.0013 0.0019 0.0000 0.0014 0.0017 -0.0001 0.0014 0.0016 -0.0002 0.0014 0.0016 -0.0002 0.0014 0.0016 -0.0002 0.0014 0.0016 0.0000 0.0012 0.0017 0.0008 0.0009 0.0019 0.0007 0.0006 0.0016 0.0012 0.0001 0.0016 0.0018 -0.0005 0.0015 0.0026 -0.0011 0.0016 0.0033 -0.0016 0.0016 X-ROTAN -0.0011 0.0005 -0.0003 -0.0008 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0008 0.0006 -0.0001 -0.0011 0.0005 -0.0003 -0.0013 0.0005 -0.0004 -0.0014 0.0005 -0.0004 -0.0013 0.0005 -0.0004 -0.0011 0.0005 -0.0003 -0.0008 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0008 0.0006 -0.0001 -0.0011 0.0005 -0.0003 -0.0014 0.0004 -0.0004 -0.0015 0.0004 -0.0005 -0.0014 0.0004 -0.0005 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0005 -0.0001 -0.0002 -0.0005 0.0000 -0.0002 0.0000 0.0000 0.0000 0.0005 0.0000 0.0003 0.0005 0.0001 0.0003 0.0003 0.0000 0.0002 0.0000 0.0000 0.0000 -0.0003 0.0000 -0.0001 -0.0005 -0.0001 -0.0002 -0.0006 0.0000 -0.0002 0.0000 0.0000 0.0000 0.0005 0.0000 0.0003 0.0005 0.0001 0.0003 0.0003 0.0001 0.0002 0.0000 0.0000 0.0001 -0.0003 0.0000 0.0000 Page 71 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0018 0.0059 0.0066 0.0016 0.0065 0.0072 0.0013 0.0071 0.0079 0.0043 -0.0048 -0.0079 0.0038 -0.0040 -0.0074 0.0034 -0.0032 -0.0068 0.0031 -0.0025 -0.0062 0.0029 -0.0018 -0.0055 0.0027 -0.0012 -0.0049 0.0026 -0.0007 -0.0042 0.0024 -0.0002 -0.0036 0.0024 0.0002 -0.0030 0.0023 0.0006 -0.0023 0.0022 0.0011 -0.0017 0.0021 0.0015 -0.0010 0.0019 0.0019 -0.0004 RADIANS) Y-TRANS -0.6127 -0.9355 -1.1367 -0.6756 -0.9457 -1.1611 -0.7398 -0.9673 -1.1992 -0.6461 -1.0397 -1.2779 -0.5775 -0.9903 -1.2045 -0.4988 -0.9672 -1.1494 -0.4462 -0.9597 -1.1189 -0.4304 -0.9627 -1.1130 -0.4525 -0.9736 -1.1295 -0.5086 -0.9897 -1.1644 -0.5826 -1.0057 -1.2069 -0.6269 -1.0131 -1.2300 -0.5826 -1.0059 -1.2042 -0.5093 -0.9917 -1.1611 -0.4552 -0.9795 -1.1274 -0.4370 -0.9745 -1.1136 72 STRUCTURE TYPE = SPACE Z-TRANS 0.0040 -0.0022 0.0017 0.0048 -0.0030 0.0018 0.0058 -0.0042 0.0017 0.0075 -0.0008 0.0059 0.0059 -0.0007 0.0048 0.0046 -0.0004 0.0040 0.0036 -0.0001 0.0034 0.0028 0.0003 0.0031 0.0020 0.0007 0.0029 0.0013 0.0012 0.0028 0.0009 0.0016 0.0028 0.0007 0.0021 0.0031 0.0001 0.0022 0.0027 -0.0003 0.0023 0.0025 -0.0004 0.0024 0.0024 -0.0005 0.0024 0.0024 X-ROTAN -0.0012 0.0004 -0.0004 -0.0008 0.0004 -0.0002 -0.0006 0.0005 0.0000 -0.0007 0.0006 -0.0001 -0.0008 0.0005 -0.0002 -0.0009 0.0003 -0.0003 -0.0010 0.0003 -0.0004 -0.0010 0.0003 -0.0004 -0.0010 0.0004 -0.0004 -0.0009 0.0004 -0.0002 -0.0007 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0007 0.0006 -0.0001 -0.0008 0.0005 -0.0002 -0.0009 0.0004 -0.0003 -0.0010 0.0004 -0.0003 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0005 -0.0001 -0.0002 -0.0007 -0.0001 -0.0003 -0.0005 -0.0003 -0.0004 0.0004 0.0007 0.0008 0.0008 0.0003 0.0007 0.0007 0.0001 0.0004 0.0004 0.0000 0.0002 0.0000 -0.0001 -0.0001 -0.0004 -0.0001 -0.0003 -0.0007 -0.0002 -0.0004 -0.0007 -0.0001 -0.0004 0.0000 0.0000 0.0000 0.0007 0.0001 0.0004 0.0007 0.0001 0.0004 0.0004 0.0001 0.0002 0.0000 0.0000 0.0000 Page 72 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0018 0.0023 0.0003 0.0017 0.0027 0.0009 0.0016 0.0032 0.0016 0.0016 0.0036 0.0023 0.0015 0.0041 0.0030 0.0014 0.0045 0.0037 0.0013 0.0050 0.0044 0.0012 0.0055 0.0051 0.0010 0.0061 0.0057 0.0008 0.0067 0.0064 0.0006 0.0074 0.0072 0.0002 0.0081 0.0078 0.0053 -0.0053 -0.0075 0.0049 -0.0045 -0.0069 0.0044 -0.0036 -0.0062 0.0041 -0.0029 -0.0056 RADIANS) Y-TRANS -0.4582 -0.9783 -1.1221 -0.5154 -0.9893 -1.1500 -0.5920 -1.0022 -1.1869 -0.6384 -1.0086 -1.2074 -0.5933 -1.0019 -1.1832 -0.5169 -0.9876 -1.1414 -0.4587 -0.9736 -1.1060 -0.4358 -0.9647 -1.0863 -0.4528 -0.9633 -1.0854 -0.5098 -0.9708 -1.1044 -0.5978 -0.9893 -1.1434 -0.6841 -1.0237 -1.1995 -0.5801 -1.1022 -1.2751 -0.5071 -1.0385 -1.1895 -0.4227 -1.0048 -1.1247 -0.3656 -0.9917 -1.0885 73 STRUCTURE TYPE = SPACE Z-TRANS -0.0006 0.0023 0.0023 -0.0005 0.0022 0.0024 -0.0003 0.0021 0.0025 0.0002 0.0019 0.0027 0.0004 0.0015 0.0025 0.0009 0.0010 0.0024 0.0016 0.0004 0.0024 0.0024 -0.0001 0.0024 0.0032 -0.0007 0.0025 0.0040 -0.0013 0.0025 0.0049 -0.0020 0.0026 0.0058 -0.0028 0.0027 0.0074 0.0010 0.0074 0.0061 0.0006 0.0060 0.0048 0.0006 0.0051 0.0037 0.0009 0.0045 X-ROTAN -0.0009 0.0004 -0.0003 -0.0008 0.0005 -0.0002 -0.0007 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0007 0.0005 -0.0001 -0.0008 0.0004 -0.0002 -0.0010 0.0003 -0.0003 -0.0010 0.0003 -0.0003 -0.0010 0.0003 -0.0003 -0.0009 0.0003 -0.0003 -0.0007 0.0004 -0.0001 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0005 -0.0001 -0.0006 0.0004 -0.0002 -0.0006 0.0004 -0.0002 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0004 -0.0001 -0.0002 -0.0007 -0.0001 -0.0004 -0.0008 -0.0001 -0.0004 0.0000 0.0000 0.0000 0.0007 0.0001 0.0004 0.0007 0.0002 0.0004 0.0004 0.0001 0.0003 0.0000 0.0001 0.0001 -0.0004 0.0000 -0.0001 -0.0008 -0.0001 -0.0003 -0.0010 -0.0003 -0.0005 -0.0006 -0.0005 -0.0006 0.0004 0.0008 0.0009 0.0009 0.0005 0.0008 0.0008 0.0002 0.0005 0.0004 0.0000 0.0002 Page 73 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0038 -0.0022 -0.0050 0.0035 -0.0016 -0.0045 0.0033 -0.0010 -0.0039 0.0030 -0.0004 -0.0033 0.0029 0.0001 -0.0026 0.0028 0.0005 -0.0020 0.0025 0.0010 -0.0014 0.0023 0.0015 -0.0008 0.0020 0.0020 -0.0002 0.0018 0.0024 0.0004 0.0015 0.0029 0.0010 0.0013 0.0034 0.0017 0.0012 0.0039 0.0023 0.0011 0.0044 0.0030 0.0008 0.0049 0.0037 0.0006 0.0055 0.0043 RADIANS) Y-TRANS -0.3488 -0.9942 -1.0820 -0.3742 -1.0095 -1.1034 -0.4367 -1.0342 -1.1475 -0.5171 -1.0611 -1.2003 -0.5642 -1.0751 -1.2291 -0.5183 -1.0618 -1.1992 -0.4398 -1.0375 -1.1475 -0.3806 -1.0178 -1.1068 -0.3606 -1.0100 -1.0904 -0.3842 -1.0161 -1.1016 -0.4473 -1.0340 -1.1365 -0.5299 -1.0563 -1.1820 -0.5787 -1.0683 -1.2070 -0.5312 -1.0548 -1.1781 -0.4483 -1.0298 -1.1274 -0.3837 -1.0073 -1.0842 74 STRUCTURE TYPE = SPACE Z-TRANS 0.0028 0.0012 0.0041 0.0020 0.0016 0.0038 0.0012 0.0021 0.0037 0.0006 0.0025 0.0037 0.0001 0.0031 0.0039 -0.0003 0.0031 0.0035 -0.0005 0.0032 0.0033 -0.0007 0.0033 0.0032 -0.0008 0.0033 0.0032 -0.0008 0.0032 0.0032 -0.0008 0.0031 0.0031 -0.0007 0.0030 0.0032 -0.0004 0.0029 0.0035 0.0001 0.0023 0.0032 0.0007 0.0018 0.0032 0.0014 0.0013 0.0032 X-ROTAN -0.0006 0.0003 -0.0002 -0.0006 0.0004 -0.0002 -0.0006 0.0004 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0001 -0.0006 0.0004 -0.0001 -0.0006 0.0004 -0.0002 -0.0006 0.0004 -0.0001 -0.0006 0.0004 -0.0001 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0005 0.0004 -0.0001 -0.0005 0.0003 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 -0.0001 -0.0001 -0.0005 -0.0002 -0.0003 -0.0008 -0.0003 -0.0005 -0.0008 -0.0002 -0.0005 0.0000 0.0000 0.0000 0.0008 0.0002 0.0005 0.0007 0.0002 0.0005 0.0004 0.0001 0.0003 0.0000 0.0000 0.0000 -0.0005 -0.0001 -0.0002 -0.0008 -0.0002 -0.0004 -0.0008 -0.0002 -0.0004 0.0000 0.0000 0.0000 0.0008 0.0002 0.0005 0.0008 0.0003 0.0005 0.0005 0.0002 0.0003 Page 74 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0004 0.0060 0.0049 0.0002 0.0066 0.0055 -0.0001 0.0073 0.0062 -0.0004 0.0080 0.0069 -0.0008 0.0087 0.0076 0.0061 -0.0052 -0.0067 0.0057 -0.0044 -0.0061 0.0054 -0.0036 -0.0055 0.0050 -0.0030 -0.0049 0.0047 -0.0023 -0.0044 0.0044 -0.0018 -0.0040 0.0040 -0.0012 -0.0035 0.0037 -0.0006 -0.0029 0.0035 -0.0001 -0.0023 0.0032 0.0005 -0.0017 0.0029 0.0010 -0.0011 RADIANS) Y-TRANS -0.3580 -0.9942 -1.0608 -0.3771 -0.9933 -1.0609 -0.4404 -1.0061 -1.0858 -0.5365 -1.0339 -1.1340 -0.6290 -1.0791 -1.1994 -0.5147 -1.1638 -1.2721 -0.4494 -1.0948 -1.1863 -0.3744 -1.0536 -1.1205 -0.3235 -1.0349 -1.0829 -0.3087 -1.0352 -1.0757 -0.3321 -1.0520 -1.0975 -0.3888 -1.0822 -1.1431 -0.4610 -1.1175 -1.1984 -0.5030 -1.1370 -1.2286 -0.4631 -1.1178 -1.1974 -0.3937 -1.0847 -1.1434 75 STRUCTURE TYPE = SPACE Z-TRANS 0.0022 0.0008 0.0033 0.0031 0.0002 0.0033 0.0040 -0.0005 0.0033 0.0049 -0.0010 0.0035 0.0058 -0.0013 0.0038 0.0074 0.0026 0.0088 0.0062 0.0017 0.0071 0.0050 0.0016 0.0061 0.0038 0.0018 0.0055 0.0028 0.0022 0.0051 0.0019 0.0025 0.0048 0.0011 0.0029 0.0045 0.0003 0.0034 0.0044 -0.0004 0.0040 0.0046 -0.0006 0.0039 0.0042 -0.0007 0.0040 0.0041 X-ROTAN -0.0005 0.0003 -0.0002 -0.0005 0.0003 -0.0002 -0.0005 0.0004 -0.0001 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0004 0.0006 0.0001 -0.0002 0.0005 0.0001 -0.0002 0.0005 0.0001 -0.0003 0.0005 0.0001 -0.0004 0.0005 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0004 0.0005 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0001 0.0001 -0.0004 -0.0001 -0.0001 -0.0008 -0.0002 -0.0004 -0.0010 -0.0004 -0.0006 -0.0007 -0.0005 -0.0007 0.0004 0.0008 0.0009 0.0008 0.0005 0.0008 0.0007 0.0003 0.0005 0.0003 0.0001 0.0002 0.0000 -0.0001 -0.0001 -0.0004 -0.0002 -0.0004 -0.0007 -0.0004 -0.0005 -0.0007 -0.0003 -0.0005 0.0000 0.0000 0.0000 0.0007 0.0003 0.0005 0.0007 0.0003 0.0005 Page 75 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0025 0.0016 -0.0006 0.0021 0.0020 0.0000 0.0017 0.0025 0.0005 0.0014 0.0031 0.0011 0.0010 0.0036 0.0017 0.0008 0.0042 0.0023 0.0005 0.0048 0.0030 0.0002 0.0054 0.0036 -0.0002 0.0059 0.0042 -0.0005 0.0064 0.0048 -0.0007 0.0070 0.0053 -0.0010 0.0076 0.0059 -0.0013 0.0083 0.0065 -0.0017 0.0089 0.0072 0.0069 -0.0045 -0.0055 0.0066 -0.0039 -0.0050 RADIANS) Y-TRANS -0.3410 -1.0590 -1.1010 -0.3234 -1.0489 -1.0840 -0.3452 -1.0567 -1.0958 -0.4025 -1.0801 -1.1325 -0.4767 -1.1107 -1.1804 -0.5207 -1.1278 -1.2069 -0.4791 -1.1083 -1.1765 -0.4056 -1.0743 -1.1232 -0.3480 -1.0457 -1.0784 -0.3255 -1.0303 -1.0546 -0.3439 -1.0309 -1.0561 -0.4025 -1.0485 -1.0834 -0.4904 -1.0831 -1.1337 -0.5741 -1.1336 -1.1990 -0.4497 -1.2249 -1.2689 -0.4022 -1.1635 -1.1970 76 STRUCTURE TYPE = SPACE Z-TRANS -0.0009 0.0042 0.0041 -0.0010 0.0042 0.0041 -0.0010 0.0041 0.0040 -0.0011 0.0039 0.0039 -0.0010 0.0038 0.0039 -0.0010 0.0038 0.0042 -0.0003 0.0031 0.0040 0.0004 0.0027 0.0040 0.0012 0.0023 0.0041 0.0021 0.0017 0.0042 0.0030 0.0011 0.0042 0.0040 0.0004 0.0041 0.0050 -0.0001 0.0043 0.0060 -0.0001 0.0048 0.0075 0.0037 0.0097 0.0062 0.0025 0.0079 X-ROTAN -0.0002 0.0005 0.0000 -0.0002 0.0004 0.0000 -0.0002 0.0005 0.0000 -0.0003 0.0005 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0003 0.0005 0.0000 -0.0002 0.0004 0.0000 -0.0001 0.0004 0.0000 -0.0001 0.0004 0.0001 -0.0002 0.0005 0.0001 -0.0004 0.0005 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0004 0.0008 0.0002 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 Z-ROTAN 0.0004 0.0002 0.0003 0.0000 0.0000 0.0000 -0.0004 -0.0002 -0.0003 -0.0007 -0.0003 -0.0005 -0.0007 -0.0003 -0.0005 0.0000 0.0000 0.0000 0.0007 0.0003 0.0005 0.0007 0.0003 0.0005 0.0004 0.0002 0.0004 0.0000 0.0001 0.0001 -0.0004 -0.0001 -0.0001 -0.0008 -0.0003 -0.0004 -0.0010 -0.0004 -0.0006 -0.0006 -0.0006 -0.0007 0.0003 0.0007 0.0007 0.0006 0.0005 0.0007 Page 76 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0063 -0.0034 -0.0045 0.0060 -0.0029 -0.0042 0.0057 -0.0024 -0.0038 0.0053 -0.0019 -0.0034 0.0050 -0.0014 -0.0030 0.0045 -0.0008 -0.0025 0.0041 -0.0002 -0.0020 0.0037 0.0005 -0.0014 0.0032 0.0011 -0.0008 0.0027 0.0016 -0.0003 0.0023 0.0021 0.0001 0.0018 0.0026 0.0006 0.0013 0.0032 0.0011 0.0008 0.0038 0.0017 0.0003 0.0045 0.0023 -0.0002 0.0051 0.0030 RADIANS) Y-TRANS -0.3483 -1.1220 -1.1396 -0.3118 -1.1005 -1.1056 -0.3015 -1.0978 -1.0976 -0.3187 -1.1123 -1.1149 -0.3598 -1.1415 -1.1537 -0.4120 -1.1779 -1.2018 -0.4429 -1.1992 -1.2288 -0.4149 -1.1769 -1.1996 -0.3658 -1.1409 -1.1511 -0.3288 -1.1138 -1.1133 -0.3170 -1.1033 -1.0981 -0.3337 -1.1111 -1.1082 -0.3760 -1.1353 -1.1404 -0.4306 -1.1681 -1.1831 -0.4639 -1.1876 -1.2074 -0.4353 -1.1651 -1.1790 77 STRUCTURE TYPE = SPACE Z-TRANS 0.0050 0.0025 0.0070 0.0039 0.0028 0.0065 0.0028 0.0032 0.0061 0.0019 0.0035 0.0057 0.0010 0.0037 0.0053 0.0001 0.0041 0.0050 -0.0007 0.0047 0.0052 -0.0008 0.0046 0.0048 -0.0009 0.0048 0.0049 -0.0010 0.0051 0.0050 -0.0011 0.0052 0.0050 -0.0012 0.0050 0.0049 -0.0013 0.0047 0.0047 -0.0013 0.0044 0.0045 -0.0014 0.0045 0.0047 -0.0006 0.0038 0.0046 X-ROTAN -0.0002 0.0008 0.0003 0.0000 0.0008 0.0004 0.0001 0.0008 0.0004 0.0000 0.0007 0.0003 -0.0002 0.0007 0.0002 -0.0005 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0002 0.0006 0.0002 0.0000 0.0007 0.0002 0.0001 0.0007 0.0003 0.0000 0.0007 0.0002 -0.0002 0.0006 0.0002 -0.0004 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0004 0.0006 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0005 0.0003 0.0005 0.0002 0.0001 0.0002 0.0000 -0.0001 -0.0001 -0.0003 -0.0002 -0.0003 -0.0005 -0.0004 -0.0005 -0.0005 -0.0004 -0.0005 0.0000 0.0000 0.0000 0.0005 0.0004 0.0005 0.0005 0.0003 0.0005 0.0003 0.0002 0.0003 0.0000 0.0000 0.0000 -0.0003 -0.0002 -0.0002 -0.0005 -0.0003 -0.0004 -0.0005 -0.0003 -0.0004 0.0000 0.0000 0.0000 0.0005 0.0004 0.0005 Page 77 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0006 0.0058 0.0036 -0.0011 0.0063 0.0041 -0.0014 0.0068 0.0046 -0.0018 0.0073 0.0051 -0.0020 0.0078 0.0056 -0.0023 0.0083 0.0061 -0.0027 0.0088 0.0066 0.0078 -0.0035 -0.0039 0.0076 -0.0034 -0.0038 0.0074 -0.0031 -0.0036 0.0071 -0.0028 -0.0034 0.0068 -0.0025 -0.0032 0.0064 -0.0020 -0.0029 0.0060 -0.0015 -0.0025 0.0055 -0.0009 -0.0021 0.0049 -0.0003 -0.0016 RADIANS) Y-TRANS -0.3839 -1.1287 -1.1312 -0.3442 -1.0995 -1.0918 -0.3299 -1.0848 -1.0718 -0.3453 -1.0869 -1.0743 -0.3901 -1.1061 -1.0993 -0.4564 -1.1413 -1.1438 -0.5194 -1.1877 -1.1982 -0.3848 -1.2863 -1.2660 -0.3619 -1.2476 -1.2224 -0.3356 -1.2171 -1.1843 -0.3181 -1.1992 -1.1602 -0.3133 -1.1944 -1.1525 -0.3220 -1.2023 -1.1610 -0.3423 -1.2215 -1.1837 -0.3682 -1.2469 -1.2133 -0.3838 -1.2625 -1.2302 78 STRUCTURE TYPE = SPACE Z-TRANS 0.0003 0.0035 0.0048 0.0011 0.0032 0.0050 0.0020 0.0027 0.0052 0.0029 0.0020 0.0051 0.0040 0.0013 0.0049 0.0050 0.0006 0.0049 0.0062 0.0008 0.0055 0.0075 0.0042 0.0101 0.0062 0.0032 0.0085 0.0050 0.0033 0.0079 0.0038 0.0038 0.0076 0.0028 0.0043 0.0072 0.0018 0.0045 0.0068 0.0009 0.0046 0.0061 0.0000 0.0046 0.0056 -0.0009 0.0051 0.0055 X-ROTAN -0.0001 0.0006 0.0002 0.0001 0.0007 0.0003 0.0002 0.0007 0.0003 0.0002 0.0007 0.0003 0.0000 0.0007 0.0003 -0.0003 0.0006 0.0002 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0004 0.0009 0.0003 -0.0001 0.0011 0.0006 0.0001 0.0012 0.0007 0.0002 0.0012 0.0007 0.0001 0.0011 0.0006 -0.0002 0.0009 0.0004 -0.0004 0.0007 0.0002 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0005 0.0004 0.0005 0.0003 0.0002 0.0003 0.0000 0.0001 0.0001 -0.0003 -0.0001 -0.0001 -0.0006 -0.0003 -0.0004 -0.0007 -0.0004 -0.0005 -0.0005 -0.0005 -0.0005 0.0001 0.0004 0.0004 0.0003 0.0004 0.0004 0.0002 0.0002 0.0003 0.0001 0.0001 0.0002 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0002 -0.0002 -0.0002 -0.0003 -0.0002 -0.0002 -0.0003 0.0000 0.0000 0.0000 Page 78 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0042 0.0004 -0.0011 0.0036 0.0010 -0.0006 0.0030 0.0016 -0.0002 0.0024 0.0022 0.0002 0.0018 0.0027 0.0007 0.0012 0.0033 0.0011 0.0005 0.0040 0.0017 -0.0002 0.0047 0.0023 -0.0009 0.0054 0.0029 -0.0015 0.0061 0.0035 -0.0021 0.0067 0.0040 -0.0025 0.0073 0.0045 -0.0029 0.0078 0.0050 -0.0032 0.0082 0.0054 -0.0035 0.0085 0.0057 -0.0038 0.0086 0.0059 RADIANS) Y-TRANS -0.3716 -1.2441 -1.2091 -0.3492 -1.2166 -1.1762 -0.3328 -1.1961 -1.1509 -0.3288 -1.1879 -1.1402 -0.3386 -1.1928 -1.1457 -0.3609 -1.2098 -1.1657 -0.3897 -1.2336 -1.1931 -0.4081 -1.2485 -1.2091 -0.3974 -1.2302 -1.1889 -0.3756 -1.2027 -1.1568 -0.3599 -1.1813 -1.1310 -0.3566 -1.1711 -1.1183 -0.3679 -1.1732 -1.1204 -0.3936 -1.1876 -1.1371 -0.4302 -1.2126 -1.1657 -0.4646 -1.2419 -1.1976 79 STRUCTURE TYPE = SPACE Z-TRANS -0.0009 0.0052 0.0053 -0.0010 0.0056 0.0056 -0.0012 0.0060 0.0059 -0.0013 0.0062 0.0060 -0.0013 0.0060 0.0058 -0.0014 0.0055 0.0054 -0.0015 0.0050 0.0050 -0.0017 0.0049 0.0051 -0.0007 0.0044 0.0051 0.0001 0.0043 0.0056 0.0010 0.0042 0.0060 0.0018 0.0038 0.0062 0.0028 0.0031 0.0061 0.0039 0.0021 0.0058 0.0051 0.0013 0.0055 0.0064 0.0011 0.0058 X-ROTAN -0.0004 0.0007 0.0001 -0.0001 0.0009 0.0004 0.0001 0.0010 0.0005 0.0002 0.0011 0.0006 0.0001 0.0010 0.0005 -0.0001 0.0009 0.0004 -0.0004 0.0007 0.0001 -0.0006 0.0006 0.0000 -0.0004 0.0007 0.0001 -0.0001 0.0009 0.0004 0.0002 0.0010 0.0006 0.0003 0.0011 0.0006 0.0003 0.0011 0.0006 0.0001 0.0010 0.0005 -0.0003 0.0008 0.0003 -0.0005 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0002 0.0003 0.0003 0.0002 0.0003 0.0003 0.0001 0.0001 0.0002 0.0000 0.0000 0.0000 -0.0002 -0.0001 -0.0001 -0.0003 -0.0002 -0.0003 -0.0003 -0.0002 -0.0003 0.0000 0.0000 0.0000 0.0002 0.0003 0.0003 0.0002 0.0003 0.0003 0.0001 0.0002 0.0002 0.0000 0.0000 0.0001 -0.0002 -0.0001 -0.0001 -0.0003 -0.0002 -0.0002 -0.0004 -0.0003 -0.0003 -0.0002 -0.0002 -0.0003 Page 79 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0089 -0.0030 -0.0030 0.0088 -0.0033 -0.0032 0.0087 -0.0034 -0.0033 0.0084 -0.0031 -0.0030 0.0081 -0.0027 -0.0027 0.0076 -0.0021 -0.0023 0.0071 -0.0016 -0.0019 0.0065 -0.0011 -0.0016 0.0057 -0.0004 -0.0013 0.0047 0.0003 -0.0010 0.0041 0.0008 -0.0006 0.0034 0.0015 -0.0002 0.0026 0.0022 0.0003 0.0019 0.0030 0.0009 0.0011 0.0037 0.0014 0.0003 0.0043 0.0018 RADIANS) Y-TRANS -0.3203 -1.3494 -1.2649 -0.3199 -1.3445 -1.2588 -0.3198 -1.3414 -1.2543 -0.3199 -1.3387 -1.2503 -0.3203 -1.3363 -1.2466 -0.3210 -1.3340 -1.2430 -0.3221 -1.3317 -1.2396 -0.3234 -1.3296 -1.2364 -0.3249 -1.3279 -1.2336 -0.3270 -1.3251 -1.2301 -0.3292 -1.3227 -1.2269 -0.3318 -1.3204 -1.2240 -0.3349 -1.3183 -1.2213 -0.3386 -1.3163 -1.2188 -0.3429 -1.3144 -1.2165 -0.3476 -1.3127 -1.2144 80 STRUCTURE TYPE = SPACE Z-TRANS 0.0074 0.0041 0.0100 0.0061 0.0036 0.0089 0.0049 0.0041 0.0087 0.0037 0.0049 0.0086 0.0027 0.0054 0.0084 0.0017 0.0055 0.0078 0.0009 0.0054 0.0070 0.0000 0.0051 0.0060 -0.0008 0.0052 0.0056 -0.0009 0.0056 0.0058 -0.0011 0.0064 0.0065 -0.0012 0.0071 0.0069 -0.0014 0.0073 0.0071 -0.0014 0.0070 0.0068 -0.0014 0.0063 0.0063 -0.0015 0.0054 0.0055 X-ROTAN -0.0006 0.0007 0.0000 -0.0005 0.0010 0.0004 -0.0003 0.0014 0.0008 -0.0001 0.0016 0.0011 -0.0001 0.0017 0.0011 -0.0001 0.0015 0.0010 -0.0003 0.0013 0.0007 -0.0005 0.0009 0.0003 -0.0006 0.0007 0.0000 -0.0005 0.0009 0.0003 -0.0003 0.0012 0.0007 -0.0002 0.0015 0.0009 -0.0001 0.0016 0.0010 -0.0001 0.0015 0.0009 -0.0003 0.0012 0.0007 -0.0005 0.0009 0.0003 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 Z-ROTAN 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 Page 80 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0008 0.0050 0.0022 -0.0019 0.0057 0.0026 -0.0026 0.0063 0.0031 -0.0032 0.0071 0.0038 -0.0038 0.0079 0.0045 -0.0043 0.0086 0.0053 -0.0046 0.0092 0.0059 -0.0049 0.0094 0.0061 -0.0050 0.0094 0.0061 -0.0086 0.0087 -0.0098 -0.0074 0.0090 -0.0085 -0.0065 0.0091 -0.0076 -0.0058 0.0091 -0.0069 -0.0051 0.0090 -0.0063 -0.0045 0.0089 -0.0058 -0.0038 0.0087 -0.0053 RADIANS) Y-TRANS -0.3526 -1.3114 -1.2126 -0.3585 -1.3091 -1.2102 -0.3645 -1.3070 -1.2082 -0.3710 -1.3051 -1.2062 -0.3780 -1.3032 -1.2042 -0.3854 -1.3012 -1.2023 -0.3933 -1.2993 -1.2003 -0.4015 -1.2978 -1.1987 -0.4101 -1.2976 -1.1984 -1.3499 -0.3202 -1.2652 -1.3455 -0.3202 -1.2596 -1.3423 -0.3203 -1.2551 -1.3396 -0.3205 -1.2512 -1.3372 -0.3209 -1.2474 -1.3347 -0.3215 -1.2438 -1.3324 -0.3225 -1.2403 81 STRUCTURE TYPE = SPACE Z-TRANS -0.0016 0.0050 0.0052 -0.0007 0.0048 0.0055 0.0001 0.0051 0.0064 0.0009 0.0052 0.0071 0.0017 0.0049 0.0073 0.0027 0.0041 0.0072 0.0037 0.0030 0.0066 0.0049 0.0016 0.0058 0.0064 0.0010 0.0056 -0.0687 0.0569 -0.0104 -0.0982 0.0481 -0.0426 -0.1404 0.0362 -0.0872 -0.1690 0.0281 -0.1172 -0.1781 0.0263 -0.1260 -0.1672 0.0313 -0.1132 -0.1381 0.0416 -0.0811 X-ROTAN -0.0006 0.0006 0.0000 -0.0004 0.0009 0.0003 -0.0002 0.0012 0.0007 0.0000 0.0015 0.0010 0.0000 0.0016 0.0011 0.0000 0.0015 0.0010 -0.0001 0.0013 0.0008 -0.0004 0.0009 0.0003 -0.0005 0.0006 0.0000 -0.0007 0.0006 0.0000 -0.0009 0.0006 -0.0003 -0.0013 0.0005 -0.0007 -0.0016 0.0005 -0.0010 -0.0017 0.0005 -0.0011 -0.0016 0.0005 -0.0010 -0.0013 0.0005 -0.0007 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0004 0.0001 0.0005 0.0004 0.0001 0.0004 0.0002 0.0001 0.0002 0.0000 0.0000 0.0000 -0.0002 -0.0001 -0.0002 -0.0004 -0.0001 -0.0004 Z-ROTAN -0.0001 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 81 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0032 0.0083 -0.0048 -0.0026 0.0078 -0.0043 -0.0019 0.0073 -0.0039 -0.0012 0.0069 -0.0034 -0.0005 0.0065 -0.0028 0.0002 0.0062 -0.0023 0.0009 0.0059 -0.0017 0.0016 0.0055 -0.0011 0.0023 0.0050 -0.0005 0.0031 0.0044 0.0000 0.0038 0.0039 0.0006 0.0045 0.0034 0.0012 0.0053 0.0031 0.0019 0.0061 0.0029 0.0027 0.0069 0.0028 0.0035 0.0078 0.0027 0.0044 RADIANS) Y-TRANS -1.3303 -0.3236 -1.2370 -1.3284 -0.3247 -1.2339 -1.3258 -0.3271 -1.2306 -1.3234 -0.3295 -1.2275 -1.3212 -0.3323 -1.2247 -1.3191 -0.3355 -1.2220 -1.3171 -0.3392 -1.2195 -1.3151 -0.3433 -1.2171 -1.3134 -0.3478 -1.2149 -1.3119 -0.3524 -1.2129 -1.3097 -0.3586 -1.2108 -1.3077 -0.3650 -1.2088 -1.3059 -0.3716 -1.2069 -1.3040 -0.3787 -1.2050 -1.3021 -0.3861 -1.2031 -1.3002 -0.3939 -1.2011 82 STRUCTURE TYPE = SPACE Z-TRANS -0.0980 0.0539 -0.0379 -0.0722 0.0612 -0.0102 -0.0976 0.0554 -0.0361 -0.1367 0.0445 -0.0770 -0.1646 0.0355 -0.1066 -0.1740 0.0319 -0.1170 -0.1637 0.0347 -0.1065 -0.1351 0.0429 -0.0770 -0.0952 0.0532 -0.0360 -0.0694 0.0588 -0.0099 -0.0946 0.0504 -0.0367 -0.1337 0.0365 -0.0787 -0.1620 0.0246 -0.1098 -0.1723 0.0187 -0.1221 -0.1626 0.0200 -0.1135 -0.1334 0.0281 -0.0843 X-ROTAN -0.0009 0.0006 -0.0003 -0.0007 0.0006 0.0000 -0.0009 0.0006 -0.0003 -0.0013 0.0005 -0.0006 -0.0015 0.0005 -0.0009 -0.0016 0.0005 -0.0010 -0.0015 0.0005 -0.0009 -0.0012 0.0005 -0.0007 -0.0009 0.0006 -0.0003 -0.0006 0.0006 0.0000 -0.0009 0.0005 -0.0003 -0.0012 0.0005 -0.0007 -0.0015 0.0004 -0.0010 -0.0016 0.0004 -0.0011 -0.0015 0.0004 -0.0010 -0.0012 0.0005 -0.0007 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0004 -0.0001 -0.0004 0.0000 0.0000 0.0000 0.0004 0.0001 0.0004 0.0003 0.0001 0.0004 0.0002 0.0001 0.0002 0.0000 0.0000 0.0000 -0.0002 -0.0001 -0.0002 -0.0004 -0.0001 -0.0004 -0.0004 -0.0001 -0.0004 0.0000 0.0000 0.0000 0.0004 0.0001 0.0004 0.0003 0.0001 0.0004 0.0002 0.0001 0.0002 0.0000 0.0000 0.0000 -0.0002 0.0000 -0.0002 -0.0004 -0.0001 -0.0004 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 Page 82 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0089 0.0028 0.0054 0.0102 0.0031 0.0067 -0.0345 0.0044 -0.0341 -0.0022 0.0067 -0.0045 0.0029 0.0047 0.0003 0.0262 0.0095 0.0240 -0.0711 -0.0019 -0.0685 -0.0016 0.0056 -0.0044 0.0029 0.0042 0.0004 0.0485 0.0206 0.0487 -0.0919 -0.0042 -0.0863 -0.0010 0.0044 -0.0046 0.0032 0.0037 0.0004 0.0587 0.0298 0.0619 -0.0932 -0.0018 -0.0847 -0.0007 0.0033 -0.0051 RADIANS) Y-TRANS -1.2987 -0.4020 -1.1995 -1.2981 -0.4100 -1.1988 -1.2873 -0.3853 -1.2670 -1.2638 -0.3844 -1.2315 -1.2497 -0.4088 -1.2103 -1.2429 -0.4653 -1.1985 -1.2258 -0.4504 -1.2699 -1.2006 -0.4442 -1.2304 -1.1889 -0.4652 -1.2089 -1.1886 -0.5203 -1.1992 -1.1646 -0.5157 -1.2732 -1.1381 -0.5047 -1.2301 -1.1288 -0.5225 -1.2083 -1.1345 -0.5753 -1.2000 -1.1029 -0.5813 -1.2763 -1.0759 -0.5662 -1.2305 83 STRUCTURE TYPE = SPACE Z-TRANS -0.0903 0.0398 -0.0405 -0.0578 0.0480 -0.0074 -0.0674 0.0572 -0.0091 -0.0704 0.0615 -0.0084 -0.0676 0.0591 -0.0081 -0.0567 0.0484 -0.0063 -0.0663 0.0574 -0.0080 -0.0688 0.0617 -0.0068 -0.0660 0.0593 -0.0065 -0.0558 0.0487 -0.0054 -0.0653 0.0575 -0.0070 -0.0673 0.0618 -0.0054 -0.0646 0.0594 -0.0052 -0.0550 0.0490 -0.0047 -0.0641 0.0578 -0.0058 -0.0661 0.0619 -0.0042 X-ROTAN -0.0008 0.0005 -0.0003 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0004 -0.0001 -0.0005 -0.0001 0.0000 -0.0001 -0.0004 -0.0001 -0.0004 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0003 0.0001 0.0003 -0.0003 -0.0001 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0001 0.0002 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0002 0.0000 0.0002 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 -0.0001 -0.0001 0.0006 -0.0001 0.0005 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0003 -0.0001 -0.0003 0.0008 -0.0001 0.0006 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0003 -0.0001 -0.0003 0.0008 -0.0002 0.0006 0.0000 0.0000 0.0000 Page 83 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0035 0.0033 0.0004 0.0592 0.0344 0.0652 -0.0792 0.0010 -0.0714 -0.0006 0.0023 -0.0059 0.0039 0.0032 0.0003 0.0531 0.0333 0.0608 -0.0560 0.0000 -0.0545 -0.0005 0.0013 -0.0070 0.0043 0.0034 0.0002 0.0410 0.0269 0.0483 -0.0272 -0.0030 -0.0344 -0.0004 0.0004 -0.0081 0.0045 0.0037 0.0000 0.0230 0.0178 0.0276 -0.0057 -0.0057 -0.0191 -0.0048 -0.0048 -0.0175 RADIANS) Y-TRANS -1.0690 -0.5808 -1.2083 -1.0799 -0.6303 -1.2005 -1.0404 -0.6473 -1.2791 -1.0135 -0.6290 -1.2312 -1.0090 -0.6405 -1.2086 -1.0244 -0.6854 -1.2005 -0.9768 -0.7139 -1.2815 -0.9506 -0.6931 -1.2323 -0.9485 -0.7017 -1.2092 -0.9678 -0.7409 -1.2000 -0.9122 -0.7808 -1.2835 -0.8873 -0.7583 -1.2334 -0.8876 -0.7640 -1.2099 -0.9104 -0.7968 -1.1994 -0.8470 -0.8470 -1.2846 -0.8425 -0.8425 -1.2761 84 STRUCTURE TYPE = SPACE Z-TRANS -0.0633 0.0595 -0.0039 -0.0542 0.0493 -0.0039 -0.0629 0.0581 -0.0045 -0.0650 0.0621 -0.0030 -0.0622 0.0596 -0.0028 -0.0533 0.0496 -0.0030 -0.0616 0.0583 -0.0031 -0.0639 0.0622 -0.0019 -0.0612 0.0597 -0.0018 -0.0522 0.0500 -0.0019 -0.0604 0.0588 -0.0016 -0.0630 0.0622 -0.0009 -0.0603 0.0596 -0.0009 -0.0513 0.0503 -0.0009 -0.0594 0.0594 0.0000 -0.0487 0.0486 0.0000 X-ROTAN -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0003 0.0000 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 -0.0001 -0.0002 0.0003 0.0000 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 -0.0001 -0.0002 0.0000 0.0000 0.0000 -0.0002 0.0002 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 -0.0004 -0.0001 -0.0004 0.0007 -0.0002 0.0004 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0003 -0.0001 -0.0004 0.0005 -0.0002 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0003 -0.0001 -0.0003 0.0002 0.0000 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 Page 84 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0039 -0.0039 -0.0160 -0.0031 -0.0031 -0.0145 -0.0023 -0.0023 -0.0131 -0.0016 -0.0016 -0.0118 -0.0010 -0.0010 -0.0106 -0.0005 -0.0005 -0.0095 -0.0001 -0.0001 -0.0087 0.0002 0.0002 -0.0078 0.0007 0.0007 -0.0068 0.0013 0.0013 -0.0057 0.0020 0.0020 -0.0045 0.0027 0.0027 -0.0033 0.0033 0.0033 -0.0022 0.0038 0.0038 -0.0011 0.0042 0.0042 -0.0002 0.0046 0.0046 0.0008 RADIANS) Y-TRANS -0.8382 -0.8382 -1.2684 -0.8344 -0.8344 -1.2613 -0.8311 -0.8311 -1.2549 -0.8285 -0.8285 -1.2491 -0.8265 -0.8265 -1.2438 -0.8249 -0.8249 -1.2390 -0.8234 -0.8234 -1.2342 -0.8222 -0.8222 -1.2300 -0.8211 -0.8211 -1.2259 -0.8204 -0.8204 -1.2221 -0.8204 -0.8204 -1.2189 -0.8211 -0.8211 -1.2163 -0.8226 -0.8226 -1.2141 -0.8244 -0.8244 -1.2123 -0.8262 -0.8262 -1.2103 -0.8281 -0.8281 -1.2081 85 STRUCTURE TYPE = SPACE Z-TRANS -0.0298 0.0298 0.0000 -0.0176 0.0176 0.0000 -0.0139 0.0139 0.0000 -0.0183 0.0183 0.0000 -0.0304 0.0304 0.0000 -0.0489 0.0489 0.0000 -0.0621 0.0621 0.0000 -0.0497 0.0497 0.0000 -0.0321 0.0321 0.0000 -0.0206 0.0206 0.0000 -0.0166 0.0166 0.0000 -0.0198 0.0198 0.0000 -0.0304 0.0304 0.0000 -0.0474 0.0474 0.0000 -0.0595 0.0595 0.0000 -0.0462 0.0462 0.0000 X-ROTAN -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0002 0.0000 -0.0004 0.0004 0.0000 -0.0006 0.0006 0.0000 -0.0004 0.0004 0.0000 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0001 0.0000 -0.0004 0.0004 0.0000 -0.0006 0.0006 0.0000 -0.0004 0.0004 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0002 0.0002 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0002 0.0000 -0.0001 0.0001 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0002 0.0000 Z-ROTAN 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 85 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0052 0.0052 0.0019 0.0060 0.0060 0.0033 0.0069 0.0069 0.0047 0.0079 0.0079 0.0064 0.0090 0.0090 0.0081 0.0099 0.0099 0.0097 0.0107 0.0107 0.0113 -0.0030 -0.0272 -0.0344 0.0004 -0.0004 -0.0081 0.0037 0.0045 0.0000 0.0178 0.0230 0.0276 0.0000 -0.0560 -0.0545 0.0013 -0.0005 -0.0070 0.0034 0.0043 0.0002 0.0269 0.0410 0.0483 0.0010 -0.0792 -0.0714 RADIANS) Y-TRANS -0.8298 -0.8298 -1.2057 -0.8319 -0.8319 -1.2035 -0.8346 -0.8346 -1.2014 -0.8378 -0.8378 -1.1996 -0.8417 -0.8417 -1.1981 -0.8468 -0.8468 -1.1978 -0.8531 -0.8531 -1.1993 -0.7808 -0.9122 -1.2835 -0.7583 -0.8873 -1.2334 -0.7640 -0.8876 -1.2099 -0.7968 -0.9104 -1.1994 -0.7139 -0.9768 -1.2815 -0.6931 -0.9506 -1.2323 -0.7017 -0.9485 -1.2092 -0.7409 -0.9678 -1.2000 -0.6473 -1.0404 -1.2791 86 STRUCTURE TYPE = SPACE Z-TRANS -0.0273 0.0273 0.0000 -0.0143 0.0143 0.0000 -0.0084 0.0084 0.0000 -0.0099 0.0099 0.0000 -0.0195 0.0195 0.0000 -0.0368 0.0368 0.0000 -0.0506 0.0506 0.0000 -0.0588 0.0604 0.0016 -0.0622 0.0630 0.0009 -0.0596 0.0603 0.0009 -0.0503 0.0513 0.0009 -0.0583 0.0616 0.0031 -0.0622 0.0639 0.0019 -0.0597 0.0612 0.0018 -0.0500 0.0522 0.0019 -0.0581 0.0629 0.0045 X-ROTAN -0.0001 0.0001 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0002 0.0000 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 -0.0003 0.0003 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0002 0.0002 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0003 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0002 0.0002 0.0000 -0.0003 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0002 0.0002 0.0000 -0.0002 -0.0002 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0001 -0.0002 0.0005 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0003 -0.0003 -0.0002 0.0007 0.0004 Page 86 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0023 -0.0006 -0.0059 0.0032 0.0039 0.0003 0.0333 0.0531 0.0608 -0.0018 -0.0932 -0.0847 0.0033 -0.0007 -0.0051 0.0033 0.0035 0.0004 0.0344 0.0592 0.0652 -0.0042 -0.0919 -0.0863 0.0044 -0.0010 -0.0046 0.0037 0.0032 0.0004 0.0298 0.0587 0.0619 -0.0019 -0.0711 -0.0685 0.0056 -0.0016 -0.0044 0.0042 0.0029 0.0004 0.0206 0.0485 0.0487 0.0044 -0.0345 -0.0341 RADIANS) Y-TRANS -0.6290 -1.0135 -1.2312 -0.6405 -1.0090 -1.2086 -0.6854 -1.0244 -1.2005 -0.5813 -1.1029 -1.2763 -0.5662 -1.0759 -1.2305 -0.5808 -1.0690 -1.2083 -0.6303 -1.0799 -1.2005 -0.5157 -1.1646 -1.2732 -0.5047 -1.1381 -1.2301 -0.5225 -1.1288 -1.2083 -0.5753 -1.1345 -1.2000 -0.4504 -1.2258 -1.2699 -0.4442 -1.2006 -1.2304 -0.4652 -1.1889 -1.2089 -0.5203 -1.1886 -1.1992 -0.3853 -1.2873 -1.2670 87 STRUCTURE TYPE = SPACE Z-TRANS -0.0621 0.0650 0.0030 -0.0596 0.0622 0.0028 -0.0496 0.0533 0.0030 -0.0578 0.0641 0.0058 -0.0619 0.0661 0.0042 -0.0595 0.0633 0.0039 -0.0493 0.0542 0.0039 -0.0575 0.0653 0.0070 -0.0618 0.0673 0.0054 -0.0594 0.0646 0.0052 -0.0490 0.0550 0.0047 -0.0574 0.0663 0.0080 -0.0617 0.0688 0.0068 -0.0593 0.0660 0.0065 -0.0487 0.0558 0.0054 -0.0572 0.0674 0.0091 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0001 0.0003 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0002 -0.0002 0.0001 0.0004 0.0004 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0003 -0.0004 -0.0002 0.0008 0.0006 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0004 -0.0004 -0.0001 0.0008 0.0006 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0003 -0.0003 -0.0001 0.0006 0.0005 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0003 -0.0003 0.0000 0.0002 0.0002 Page 87 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0067 -0.0022 -0.0045 0.0047 0.0029 0.0003 0.0095 0.0262 0.0240 0.0087 -0.0086 -0.0098 0.0090 -0.0074 -0.0085 0.0091 -0.0065 -0.0076 0.0091 -0.0058 -0.0069 0.0090 -0.0051 -0.0063 0.0089 -0.0045 -0.0058 0.0087 -0.0038 -0.0053 0.0083 -0.0032 -0.0048 0.0078 -0.0026 -0.0043 0.0073 -0.0019 -0.0039 0.0069 -0.0012 -0.0034 0.0065 -0.0005 -0.0028 0.0062 0.0002 -0.0023 RADIANS) Y-TRANS -0.3844 -1.2638 -1.2315 -0.4088 -1.2497 -1.2103 -0.4653 -1.2429 -1.1985 -0.3202 -1.3499 -1.2652 -0.3202 -1.3455 -1.2596 -0.3203 -1.3423 -1.2551 -0.3205 -1.3396 -1.2512 -0.3209 -1.3372 -1.2474 -0.3215 -1.3347 -1.2438 -0.3225 -1.3324 -1.2403 -0.3236 -1.3303 -1.2370 -0.3247 -1.3284 -1.2339 -0.3271 -1.3258 -1.2306 -0.3295 -1.3234 -1.2275 -0.3323 -1.3212 -1.2247 -0.3355 -1.3191 -1.2220 88 STRUCTURE TYPE = SPACE Z-TRANS -0.0615 0.0704 0.0084 -0.0591 0.0676 0.0081 -0.0484 0.0567 0.0063 -0.0569 0.0687 0.0104 -0.0481 0.0982 0.0426 -0.0362 0.1404 0.0872 -0.0281 0.1690 0.1172 -0.0263 0.1781 0.1260 -0.0313 0.1672 0.1132 -0.0416 0.1381 0.0811 -0.0539 0.0980 0.0379 -0.0612 0.0722 0.0102 -0.0554 0.0976 0.0361 -0.0445 0.1367 0.0770 -0.0355 0.1646 0.1066 -0.0319 0.1740 0.1170 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0009 0.0003 -0.0005 0.0013 0.0007 -0.0005 0.0016 0.0010 -0.0005 0.0017 0.0011 -0.0005 0.0016 0.0010 -0.0005 0.0013 0.0007 -0.0006 0.0009 0.0003 -0.0006 0.0007 0.0000 -0.0006 0.0009 0.0003 -0.0005 0.0013 0.0006 -0.0005 0.0015 0.0009 -0.0005 0.0016 0.0010 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0003 -0.0003 0.0000 0.0000 0.0000 -0.0001 -0.0004 -0.0005 -0.0001 -0.0004 -0.0004 -0.0001 -0.0002 -0.0002 0.0000 0.0000 0.0000 0.0001 0.0002 0.0002 0.0001 0.0004 0.0004 0.0001 0.0004 0.0004 0.0000 0.0000 0.0000 -0.0001 -0.0004 -0.0004 -0.0001 -0.0003 -0.0004 -0.0001 -0.0002 -0.0002 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 -0.0001 -0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 88 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0059 0.0009 -0.0017 0.0055 0.0016 -0.0011 0.0050 0.0023 -0.0005 0.0044 0.0031 0.0000 0.0039 0.0038 0.0006 0.0034 0.0045 0.0012 0.0031 0.0053 0.0019 0.0029 0.0061 0.0027 0.0028 0.0069 0.0035 0.0027 0.0078 0.0044 0.0028 0.0089 0.0054 0.0031 0.0102 0.0067 -0.0121 0.0095 -0.0144 -0.0108 0.0097 -0.0131 -0.0095 0.0099 -0.0118 -0.0085 0.0100 -0.0108 RADIANS) Y-TRANS -0.3392 -1.3171 -1.2195 -0.3433 -1.3151 -1.2171 -0.3478 -1.3134 -1.2149 -0.3524 -1.3119 -1.2129 -0.3586 -1.3097 -1.2108 -0.3650 -1.3077 -1.2088 -0.3716 -1.3059 -1.2069 -0.3787 -1.3040 -1.2050 -0.3861 -1.3021 -1.2031 -0.3939 -1.3002 -1.2011 -0.4020 -1.2987 -1.1995 -0.4100 -1.2981 -1.1988 -1.3498 -0.3200 -1.2650 -1.3464 -0.3205 -1.2604 -1.3433 -0.3208 -1.2561 -1.3405 -0.3210 -1.2520 89 STRUCTURE TYPE = SPACE Z-TRANS -0.0347 0.1637 0.1065 -0.0429 0.1351 0.0770 -0.0532 0.0952 0.0360 -0.0588 0.0694 0.0099 -0.0504 0.0946 0.0367 -0.0365 0.1337 0.0787 -0.0246 0.1620 0.1098 -0.0187 0.1723 0.1221 -0.0200 0.1626 0.1135 -0.0281 0.1334 0.0843 -0.0398 0.0903 0.0405 -0.0480 0.0578 0.0074 -0.1318 0.1222 -0.0088 -0.1773 0.1096 -0.0603 -0.2473 0.0944 -0.1343 -0.2979 0.0838 -0.1870 X-ROTAN -0.0005 0.0015 0.0009 -0.0005 0.0012 0.0007 -0.0006 0.0009 0.0003 -0.0006 0.0006 0.0000 -0.0005 0.0009 0.0003 -0.0005 0.0012 0.0007 -0.0004 0.0015 0.0010 -0.0004 0.0016 0.0011 -0.0004 0.0015 0.0010 -0.0005 0.0012 0.0007 -0.0005 0.0008 0.0003 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0006 -0.0001 -0.0009 0.0006 -0.0003 -0.0010 0.0006 -0.0004 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0001 0.0002 0.0002 0.0001 0.0004 0.0004 0.0001 0.0004 0.0004 0.0000 0.0000 0.0000 -0.0001 -0.0004 -0.0004 -0.0001 -0.0003 -0.0004 -0.0001 -0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0002 0.0002 0.0001 0.0004 0.0004 0.0001 0.0004 0.0005 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0007 0.0002 0.0008 0.0007 0.0001 0.0007 0.0004 0.0001 0.0004 Z-ROTAN 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 89 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0076 0.0102 -0.0100 -0.0068 0.0102 -0.0092 -0.0061 0.0102 -0.0086 -0.0054 0.0102 -0.0079 -0.0048 0.0100 -0.0074 -0.0041 0.0099 -0.0069 -0.0034 0.0098 -0.0063 -0.0026 0.0098 -0.0056 -0.0019 0.0098 -0.0049 -0.0011 0.0098 -0.0042 -0.0003 0.0098 -0.0035 0.0005 0.0097 -0.0028 0.0011 0.0096 -0.0022 0.0018 0.0094 -0.0016 0.0026 0.0094 -0.0009 0.0034 0.0094 -0.0001 RADIANS) Y-TRANS -1.3380 -0.3214 -1.2482 -1.3355 -0.3220 -1.2445 -1.3331 -0.3228 -1.2408 -1.3308 -0.3237 -1.2374 -1.3286 -0.3247 -1.2340 -1.3263 -0.3272 -1.2310 -1.3240 -0.3299 -1.2280 -1.3218 -0.3328 -1.2253 -1.3197 -0.3360 -1.2226 -1.3177 -0.3396 -1.2201 -1.3158 -0.3436 -1.2176 -1.3139 -0.3479 -1.2153 -1.3121 -0.3524 -1.2130 -1.3102 -0.3588 -1.2112 -1.3084 -0.3654 -1.2093 -1.3066 -0.3722 -1.2075 90 STRUCTURE TYPE = SPACE Z-TRANS -0.3152 0.0812 -0.2039 -0.2970 0.0872 -0.1831 -0.2468 0.0998 -0.1288 -0.1792 0.1144 -0.0571 -0.1372 0.1228 -0.0126 -0.1786 0.1167 -0.0545 -0.2450 0.1041 -0.1230 -0.2938 0.0933 -0.1741 -0.3105 0.0886 -0.1922 -0.2921 0.0915 -0.1741 -0.2418 0.1006 -0.1232 -0.1741 0.1119 -0.0546 -0.1319 0.1173 -0.0125 -0.1731 0.1077 -0.0560 -0.2397 0.0911 -0.1266 -0.2893 0.0767 -0.1801 X-ROTAN -0.0011 0.0006 -0.0005 -0.0010 0.0006 -0.0004 -0.0009 0.0006 -0.0003 -0.0007 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0007 0.0006 -0.0001 -0.0009 0.0006 -0.0003 -0.0010 0.0006 -0.0004 -0.0011 0.0006 -0.0005 -0.0010 0.0006 -0.0004 -0.0009 0.0006 -0.0003 -0.0007 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0007 0.0006 -0.0001 -0.0009 0.0006 -0.0003 -0.0010 0.0006 -0.0004 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 -0.0004 -0.0001 -0.0004 -0.0006 -0.0001 -0.0007 -0.0007 -0.0001 -0.0007 0.0000 0.0000 0.0000 0.0007 0.0001 0.0007 0.0006 0.0001 0.0007 0.0003 0.0001 0.0004 0.0000 0.0000 0.0000 -0.0004 -0.0001 -0.0004 -0.0006 -0.0001 -0.0007 -0.0007 -0.0001 -0.0007 0.0000 0.0000 0.0000 0.0007 0.0002 0.0007 0.0006 0.0002 0.0007 0.0004 0.0001 0.0004 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 Page 90 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0043 0.0095 0.0008 0.0053 0.0096 0.0017 0.0065 0.0097 0.0029 0.0079 0.0099 0.0043 0.0094 0.0101 0.0058 -0.0503 0.0120 -0.0453 -0.0043 0.0086 -0.0079 0.0010 0.0101 -0.0018 0.0278 0.0127 0.0242 -0.1103 0.0128 -0.0960 -0.0035 0.0070 -0.0079 0.0014 0.0092 -0.0017 0.0552 0.0218 0.0533 -0.1473 0.0192 -0.1214 -0.0028 0.0054 -0.0082 0.0022 0.0079 -0.0017 RADIANS) Y-TRANS -1.3048 -0.3793 -1.2057 -1.3030 -0.3868 -1.2039 -1.3012 -0.3945 -1.2020 -1.2996 -0.4024 -1.2003 -1.2981 -0.4101 -1.1986 -1.2882 -0.3856 -1.2679 -1.2650 -0.3850 -1.2327 -1.2509 -0.4094 -1.2115 -1.2436 -0.4659 -1.1993 -1.2267 -0.4510 -1.2709 -1.2019 -0.4453 -1.2319 -1.1903 -0.4664 -1.2103 -1.1895 -0.5212 -1.2002 -1.1653 -0.5165 -1.2741 -1.1392 -0.5061 -1.2316 -1.1299 -0.5240 -1.2097 91 STRUCTURE TYPE = SPACE Z-TRANS -0.3074 0.0695 -0.2011 -0.2899 0.0714 -0.1853 -0.2384 0.0813 -0.1342 -0.1653 0.0947 -0.0605 -0.1129 0.1036 -0.0073 -0.1304 0.1224 -0.0075 -0.1348 0.1231 -0.0101 -0.1294 0.1176 -0.0100 -0.1119 0.1037 -0.0062 -0.1292 0.1226 -0.0063 -0.1326 0.1234 -0.0079 -0.1272 0.1180 -0.0078 -0.1108 0.1039 -0.0052 -0.1283 0.1228 -0.0053 -0.1308 0.1238 -0.0060 -0.1255 0.1184 -0.0060 X-ROTAN -0.0011 0.0006 -0.0005 -0.0010 0.0006 -0.0004 -0.0009 0.0006 -0.0003 -0.0006 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 -0.0004 -0.0001 -0.0003 -0.0007 -0.0001 -0.0007 -0.0008 -0.0001 -0.0008 -0.0001 0.0000 -0.0002 -0.0006 0.0000 -0.0005 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0003 0.0001 0.0003 -0.0005 0.0000 -0.0004 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0001 0.0002 -0.0002 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0001 0.0002 -0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0001 0.0000 0.0001 0.0003 -0.0003 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 91 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0685 0.0299 0.0690 -0.1497 0.0320 -0.1122 -0.0023 0.0037 -0.0090 0.0033 0.0067 -0.0018 0.0713 0.0344 0.0741 -0.1255 0.0374 -0.0872 -0.0021 0.0021 -0.0101 0.0045 0.0058 -0.0019 0.0662 0.0343 0.0706 -0.0873 0.0268 -0.0643 -0.0019 0.0006 -0.0116 0.0055 0.0053 -0.0022 0.0526 0.0297 0.0576 -0.0426 0.0056 -0.0441 -0.0018 -0.0006 -0.0129 0.0061 0.0053 -0.0024 RADIANS) Y-TRANS -1.1352 -0.5764 -1.2009 -1.1037 -0.5824 -1.2774 -1.0766 -0.5678 -1.2318 -1.0697 -0.5825 -1.2095 -1.0805 -0.6315 -1.2014 -1.0412 -0.6483 -1.2802 -1.0139 -0.6306 -1.2323 -1.0094 -0.6422 -1.2096 -1.0252 -0.6866 -1.2015 -0.9775 -0.7146 -1.2824 -0.9509 -0.6944 -1.2331 -0.9488 -0.7030 -1.2099 -0.9687 -0.7419 -1.2010 -0.9124 -0.7818 -1.2843 -0.8875 -0.7590 -1.2339 -0.8878 -0.7647 -1.2103 92 STRUCTURE TYPE = SPACE Z-TRANS -0.1103 0.1042 -0.0046 -0.1275 0.1229 -0.0045 -0.1293 0.1242 -0.0045 -0.1240 0.1189 -0.0045 -0.1100 0.1045 -0.0041 -0.1268 0.1235 -0.0033 -0.1280 0.1246 -0.0032 -0.1227 0.1192 -0.0031 -0.1096 0.1049 -0.0036 -0.1259 0.1237 -0.0023 -0.1269 0.1248 -0.0020 -0.1216 0.1195 -0.0020 -0.1089 0.1054 -0.0027 -0.1250 0.1237 -0.0012 -0.1257 0.1248 -0.0009 -0.1204 0.1194 -0.0010 X-ROTAN -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0001 0.0001 0.0001 0.0001 0.0001 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0003 0.0000 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0004 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 -0.0001 -0.0002 0.0005 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0001 0.0000 0.0002 0.0003 -0.0004 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0002 0.0002 -0.0004 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0001 0.0002 -0.0003 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 92 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0301 0.0233 0.0338 -0.0096 -0.0096 -0.0279 -0.0087 -0.0087 -0.0261 -0.0074 -0.0074 -0.0237 -0.0062 -0.0062 -0.0216 -0.0050 -0.0050 -0.0196 -0.0039 -0.0039 -0.0178 -0.0030 -0.0030 -0.0162 -0.0021 -0.0021 -0.0148 -0.0014 -0.0014 -0.0136 -0.0007 -0.0007 -0.0123 0.0001 0.0001 -0.0110 0.0011 0.0011 -0.0096 0.0022 0.0022 -0.0080 0.0033 0.0033 -0.0065 0.0043 0.0043 -0.0051 RADIANS) Y-TRANS -0.9106 -0.7973 -1.1996 -0.8476 -0.8476 -1.2853 -0.8436 -0.8436 -1.2774 -0.8395 -0.8395 -1.2701 -0.8358 -0.8358 -1.2630 -0.8325 -0.8325 -1.2564 -0.8297 -0.8297 -1.2503 -0.8273 -0.8273 -1.2447 -0.8254 -0.8254 -1.2395 -0.8237 -0.8237 -1.2345 -0.8227 -0.8227 -1.2305 -0.8219 -0.8219 -1.2267 -0.8215 -0.8215 -1.2232 -0.8216 -0.8216 -1.2201 -0.8223 -0.8223 -1.2174 -0.8234 -0.8234 -1.2150 93 STRUCTURE TYPE = SPACE Z-TRANS -0.1076 0.1060 -0.0012 -0.1239 0.1239 0.0000 -0.0987 0.0987 0.0000 -0.0526 0.0526 0.0000 -0.0212 0.0212 0.0000 -0.0111 0.0111 0.0000 -0.0220 0.0220 0.0000 -0.0525 0.0525 0.0000 -0.0956 0.0956 0.0000 -0.1244 0.1244 0.0000 -0.0968 0.0968 0.0000 -0.0547 0.0547 0.0000 -0.0250 0.0250 0.0000 -0.0143 0.0143 0.0000 -0.0233 0.0233 0.0000 -0.0513 0.0513 0.0000 X-ROTAN -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0003 0.0003 0.0000 -0.0002 0.0002 0.0000 -0.0001 0.0001 0.0000 -0.0002 0.0002 0.0000 -0.0003 0.0003 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0003 0.0003 0.0000 -0.0002 0.0002 0.0000 -0.0001 0.0001 0.0000 -0.0002 0.0002 0.0000 -0.0003 0.0003 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0003 -0.0001 -0.0003 0.0001 -0.0001 0.0000 -0.0005 0.0005 0.0000 -0.0004 0.0004 0.0000 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0002 -0.0002 0.0000 0.0004 -0.0004 0.0000 0.0004 -0.0004 0.0000 0.0000 0.0000 0.0000 -0.0004 0.0004 0.0000 -0.0004 0.0004 0.0000 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0002 -0.0002 0.0000 0.0004 -0.0004 0.0000 Z-ROTAN 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 93 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0051 0.0051 -0.0038 0.0058 0.0058 -0.0026 0.0066 0.0066 -0.0014 0.0075 0.0075 0.0000 0.0087 0.0087 0.0016 0.0100 0.0100 0.0035 0.0117 0.0117 0.0057 0.0135 0.0135 0.0084 0.0156 0.0156 0.0115 0.0163 0.0163 0.0133 0.0056 -0.0426 -0.0441 -0.0006 -0.0018 -0.0129 0.0053 0.0061 -0.0024 0.0233 0.0301 0.0338 0.0268 -0.0873 -0.0643 0.0006 -0.0019 -0.0116 RADIANS) Y-TRANS -0.8249 -0.8249 -1.2128 -0.8265 -0.8265 -1.2106 -0.8286 -0.8286 -1.2087 -0.8308 -0.8308 -1.2067 -0.8333 -0.8333 -1.2047 -0.8361 -0.8361 -1.2029 -0.8394 -0.8394 -1.2012 -0.8431 -0.8431 -1.1997 -0.8472 -0.8472 -1.1983 -0.8530 -0.8530 -1.1990 -0.7818 -0.9124 -1.2843 -0.7590 -0.8875 -1.2339 -0.7647 -0.8878 -1.2103 -0.7973 -0.9106 -1.1996 -0.7146 -0.9775 -1.2824 -0.6944 -0.9509 -1.2331 94 STRUCTURE TYPE = SPACE Z-TRANS -0.0921 0.0921 0.0000 -0.1190 0.1190 0.0000 -0.0897 0.0897 0.0000 -0.0452 0.0452 0.0000 -0.0122 0.0122 0.0000 0.0024 -0.0024 0.0000 -0.0028 0.0028 0.0000 -0.0289 0.0289 0.0000 -0.0725 0.0725 0.0000 -0.1065 0.1065 0.0000 -0.1237 0.1250 0.0012 -0.1248 0.1257 0.0009 -0.1194 0.1204 0.0010 -0.1060 0.1076 0.0012 -0.1237 0.1259 0.0023 -0.1248 0.1269 0.0020 X-ROTAN -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0003 0.0003 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0001 0.0000 -0.0002 0.0002 0.0000 -0.0004 0.0004 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0004 -0.0004 0.0000 0.0000 0.0000 0.0000 -0.0005 0.0005 0.0000 -0.0004 0.0004 0.0000 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0002 -0.0002 0.0000 0.0004 -0.0004 0.0000 0.0005 -0.0005 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0005 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0003 0.0003 0.0002 -0.0004 -0.0002 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0003 0.0002 -0.0001 0.0000 0.0000 0.0000 Page 94 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0053 0.0055 -0.0022 0.0297 0.0526 0.0576 0.0374 -0.1255 -0.0872 0.0021 -0.0021 -0.0101 0.0058 0.0045 -0.0019 0.0343 0.0662 0.0706 0.0320 -0.1497 -0.1122 0.0037 -0.0023 -0.0090 0.0067 0.0033 -0.0018 0.0344 0.0713 0.0741 0.0192 -0.1473 -0.1214 0.0054 -0.0028 -0.0082 0.0079 0.0022 -0.0017 0.0299 0.0685 0.0690 0.0128 -0.1103 -0.0960 0.0070 -0.0035 -0.0079 RADIANS) Y-TRANS -0.7030 -0.9488 -1.2099 -0.7419 -0.9687 -1.2010 -0.6483 -1.0412 -1.2802 -0.6306 -1.0139 -1.2323 -0.6422 -1.0094 -1.2096 -0.6866 -1.0252 -1.2015 -0.5824 -1.1037 -1.2774 -0.5678 -1.0766 -1.2318 -0.5825 -1.0697 -1.2095 -0.6315 -1.0805 -1.2014 -0.5165 -1.1653 -1.2741 -0.5061 -1.1392 -1.2316 -0.5240 -1.1299 -1.2097 -0.5764 -1.1352 -1.2009 -0.4510 -1.2267 -1.2709 -0.4453 -1.2019 -1.2319 95 STRUCTURE TYPE = SPACE Z-TRANS -0.1195 0.1216 0.0020 -0.1054 0.1089 0.0027 -0.1235 0.1268 0.0033 -0.1246 0.1280 0.0032 -0.1192 0.1227 0.0031 -0.1049 0.1096 0.0036 -0.1229 0.1275 0.0045 -0.1242 0.1293 0.0045 -0.1189 0.1240 0.0045 -0.1045 0.1100 0.0041 -0.1228 0.1283 0.0053 -0.1238 0.1308 0.0060 -0.1184 0.1255 0.0060 -0.1042 0.1103 0.0046 -0.1226 0.1292 0.0063 -0.1234 0.1326 0.0079 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0001 0.0002 0.0002 0.0000 -0.0003 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 -0.0001 -0.0001 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0001 0.0000 0.0005 0.0004 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0004 0.0002 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 -0.0004 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0002 -0.0003 0.0003 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0002 -0.0002 0.0002 0.0001 0.0000 0.0000 0.0000 Page 95 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0092 0.0014 -0.0017 0.0218 0.0552 0.0533 0.0120 -0.0503 -0.0453 0.0086 -0.0043 -0.0079 0.0101 0.0010 -0.0018 0.0127 0.0278 0.0242 0.0095 -0.0121 -0.0144 0.0097 -0.0108 -0.0131 0.0099 -0.0095 -0.0118 0.0100 -0.0085 -0.0108 0.0102 -0.0076 -0.0100 0.0102 -0.0068 -0.0092 0.0102 -0.0061 -0.0086 0.0102 -0.0054 -0.0079 0.0100 -0.0048 -0.0074 0.0099 -0.0041 -0.0069 RADIANS) Y-TRANS -0.4664 -1.1903 -1.2103 -0.5212 -1.1895 -1.2002 -0.3856 -1.2882 -1.2679 -0.3850 -1.2650 -1.2327 -0.4094 -1.2509 -1.2115 -0.4659 -1.2436 -1.1993 -0.3200 -1.3498 -1.2650 -0.3205 -1.3464 -1.2604 -0.3208 -1.3433 -1.2561 -0.3210 -1.3405 -1.2520 -0.3214 -1.3380 -1.2482 -0.3220 -1.3355 -1.2445 -0.3228 -1.3331 -1.2408 -0.3237 -1.3308 -1.2374 -0.3247 -1.3286 -1.2340 -0.3272 -1.3263 -1.2310 96 STRUCTURE TYPE = SPACE Z-TRANS -0.1180 0.1272 0.0078 -0.1039 0.1108 0.0052 -0.1224 0.1304 0.0075 -0.1231 0.1348 0.0101 -0.1176 0.1294 0.0100 -0.1037 0.1119 0.0062 -0.1222 0.1318 0.0088 -0.1096 0.1773 0.0603 -0.0944 0.2473 0.1343 -0.0838 0.2979 0.1870 -0.0812 0.3152 0.2039 -0.0872 0.2970 0.1831 -0.0998 0.2468 0.1288 -0.1144 0.1792 0.0571 -0.1228 0.1372 0.0126 -0.1167 0.1786 0.0545 X-ROTAN -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0007 0.0001 -0.0006 0.0009 0.0003 -0.0006 0.0010 0.0004 -0.0006 0.0011 0.0005 -0.0006 0.0010 0.0004 -0.0006 0.0009 0.0003 -0.0006 0.0007 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0007 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 -0.0001 -0.0002 -0.0002 0.0000 0.0006 0.0005 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0003 -0.0003 -0.0001 0.0000 -0.0001 -0.0002 -0.0007 -0.0008 -0.0001 -0.0007 -0.0007 -0.0001 -0.0004 -0.0004 0.0000 0.0000 0.0000 0.0001 0.0004 0.0004 0.0001 0.0006 0.0007 0.0001 0.0007 0.0007 0.0000 0.0000 0.0000 -0.0001 -0.0007 -0.0007 Z-ROTAN -0.0001 0.0000 0.0000 0.0000 0.0001 0.0001 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 96 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0098 -0.0034 -0.0063 0.0098 -0.0026 -0.0056 0.0098 -0.0019 -0.0049 0.0098 -0.0011 -0.0042 0.0098 -0.0003 -0.0035 0.0097 0.0005 -0.0028 0.0096 0.0011 -0.0022 0.0094 0.0018 -0.0016 0.0094 0.0026 -0.0009 0.0094 0.0034 -0.0001 0.0095 0.0043 0.0008 0.0096 0.0053 0.0017 0.0097 0.0065 0.0029 0.0099 0.0079 0.0043 0.0101 0.0094 0.0058 -0.0143 0.0107 -0.0176 RADIANS) Y-TRANS -0.3299 -1.3240 -1.2280 -0.3328 -1.3218 -1.2253 -0.3360 -1.3197 -1.2226 -0.3396 -1.3177 -1.2201 -0.3436 -1.3158 -1.2176 -0.3479 -1.3139 -1.2153 -0.3524 -1.3121 -1.2130 -0.3588 -1.3102 -1.2112 -0.3654 -1.3084 -1.2093 -0.3722 -1.3066 -1.2075 -0.3793 -1.3048 -1.2057 -0.3868 -1.3030 -1.2039 -0.3945 -1.3012 -1.2020 -0.4024 -1.2996 -1.2003 -0.4101 -1.2981 -1.1986 -1.3497 -0.3201 -1.2648 97 STRUCTURE TYPE = SPACE Z-TRANS -0.1041 0.2450 0.1230 -0.0933 0.2938 0.1741 -0.0886 0.3105 0.1922 -0.0915 0.2921 0.1741 -0.1006 0.2418 0.1232 -0.1119 0.1741 0.0546 -0.1173 0.1319 0.0125 -0.1077 0.1731 0.0560 -0.0911 0.2397 0.1266 -0.0767 0.2893 0.1801 -0.0695 0.3074 0.2011 -0.0714 0.2899 0.1853 -0.0813 0.2384 0.1342 -0.0947 0.1653 0.0605 -0.1036 0.1129 0.0073 -0.1936 0.1879 -0.0060 X-ROTAN -0.0006 0.0009 0.0003 -0.0006 0.0010 0.0004 -0.0006 0.0011 0.0005 -0.0006 0.0010 0.0004 -0.0006 0.0009 0.0003 -0.0006 0.0007 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0007 0.0001 -0.0006 0.0009 0.0003 -0.0006 0.0010 0.0004 -0.0006 0.0011 0.0005 -0.0006 0.0010 0.0004 -0.0006 0.0009 0.0003 -0.0006 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0001 -0.0006 -0.0007 -0.0001 -0.0003 -0.0004 0.0000 0.0000 0.0000 0.0001 0.0004 0.0004 0.0001 0.0006 0.0007 0.0001 0.0007 0.0007 0.0000 0.0000 0.0000 -0.0002 -0.0007 -0.0007 -0.0002 -0.0006 -0.0007 -0.0001 -0.0004 -0.0004 0.0000 0.0000 0.0000 0.0001 0.0004 0.0003 0.0001 0.0007 0.0007 0.0001 0.0008 0.0008 0.0000 0.0001 0.0002 0.0000 0.0001 0.0001 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 Page 97 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0132 0.0108 -0.0166 -0.0121 0.0109 -0.0155 -0.0110 0.0111 -0.0145 -0.0101 0.0114 -0.0135 -0.0092 0.0116 -0.0127 -0.0084 0.0118 -0.0119 -0.0077 0.0120 -0.0112 -0.0070 0.0122 -0.0105 -0.0063 0.0125 -0.0099 -0.0056 0.0127 -0.0091 -0.0048 0.0131 -0.0083 -0.0039 0.0134 -0.0075 -0.0031 0.0138 -0.0067 -0.0023 0.0142 -0.0059 -0.0015 0.0145 -0.0051 -0.0008 0.0148 -0.0044 RADIANS) Y-TRANS -1.3470 -0.3208 -1.2610 -1.3442 -0.3212 -1.2569 -1.3414 -0.3215 -1.2529 -1.3387 -0.3219 -1.2489 -1.3361 -0.3225 -1.2451 -1.3336 -0.3231 -1.2413 -1.3312 -0.3239 -1.2377 -1.3287 -0.3249 -1.2340 -1.3266 -0.3274 -1.2312 -1.3245 -0.3302 -1.2285 -1.3224 -0.3332 -1.2258 -1.3203 -0.3364 -1.2232 -1.3183 -0.3400 -1.2206 -1.3163 -0.3439 -1.2181 -1.3143 -0.3481 -1.2156 -1.3122 -0.3526 -1.2131 98 STRUCTURE TYPE = SPACE Z-TRANS -0.2387 0.1738 -0.0597 -0.3135 0.1592 -0.1396 -0.3703 0.1493 -0.1987 -0.3908 0.1470 -0.2186 -0.3710 0.1527 -0.1957 -0.3154 0.1644 -0.1356 -0.2425 0.1776 -0.0579 -0.1998 0.1850 -0.0123 -0.2425 0.1806 -0.0552 -0.3149 0.1700 -0.1297 -0.3696 0.1604 -0.1869 -0.3885 0.1558 -0.2075 -0.3672 0.1577 -0.1870 -0.3102 0.1648 -0.1300 -0.2358 0.1732 -0.0556 -0.1920 0.1765 -0.0124 X-ROTAN -0.0005 0.0006 0.0001 -0.0005 0.0007 0.0001 -0.0005 0.0007 0.0002 -0.0005 0.0007 0.0002 -0.0005 0.0007 0.0001 -0.0005 0.0007 0.0001 -0.0006 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0001 -0.0005 0.0007 0.0001 -0.0005 0.0007 0.0001 -0.0005 0.0007 0.0001 -0.0005 0.0007 0.0001 -0.0005 0.0007 0.0001 -0.0006 0.0006 0.0001 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0007 0.0002 0.0008 0.0007 0.0001 0.0008 0.0004 0.0001 0.0004 0.0000 0.0000 0.0000 -0.0004 -0.0001 -0.0004 -0.0007 -0.0001 -0.0007 -0.0007 -0.0001 -0.0007 0.0000 0.0000 0.0000 0.0007 0.0001 0.0007 0.0007 0.0001 0.0007 0.0004 0.0001 0.0004 0.0000 0.0000 0.0000 -0.0004 0.0000 -0.0004 -0.0007 -0.0001 -0.0007 -0.0007 -0.0001 -0.0007 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 Page 98 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0001 0.0150 -0.0038 0.0006 0.0153 -0.0030 0.0015 0.0156 -0.0022 0.0024 0.0160 -0.0013 0.0034 0.0163 -0.0003 0.0045 0.0166 0.0008 0.0058 0.0169 0.0021 0.0075 0.0171 0.0037 -0.0531 0.0206 -0.0437 -0.0065 0.0104 -0.0113 -0.0010 0.0155 -0.0040 0.0184 0.0226 0.0142 -0.1185 0.0302 -0.0933 -0.0056 0.0084 -0.0117 -0.0003 0.0145 -0.0038 0.0332 0.0286 0.0287 RADIANS) Y-TRANS -1.3106 -0.3591 -1.2115 -1.3089 -0.3657 -1.2098 -1.3072 -0.3727 -1.2081 -1.3055 -0.3799 -1.2064 -1.3038 -0.3873 -1.2046 -1.3021 -0.3950 -1.2028 -1.3002 -0.4028 -1.2009 -1.2979 -0.4107 -1.1985 -1.2887 -0.3859 -1.2684 -1.2661 -0.3855 -1.2337 -1.2520 -0.4100 -1.2125 -1.2443 -0.4665 -1.2000 -1.2273 -0.4515 -1.2716 -1.2032 -0.4462 -1.2332 -1.1914 -0.4673 -1.2116 -1.1901 -0.5220 -1.2009 99 STRUCTURE TYPE = SPACE Z-TRANS -0.2340 0.1680 -0.0574 -0.3062 0.1530 -0.1343 -0.3616 0.1397 -0.1944 -0.3819 0.1329 -0.2184 -0.3620 0.1343 -0.2007 -0.3041 0.1427 -0.1438 -0.2241 0.1536 -0.0638 -0.1672 0.1591 -0.0063 -0.1925 0.1880 -0.0050 -0.1977 0.1853 -0.0101 -0.1898 0.1768 -0.0102 -0.1653 0.1594 -0.0045 -0.1916 0.1881 -0.0040 -0.1957 0.1856 -0.0080 -0.1878 0.1772 -0.0082 -0.1650 0.1595 -0.0041 X-ROTAN -0.0005 0.0006 0.0001 -0.0005 0.0006 0.0001 -0.0005 0.0007 0.0001 -0.0004 0.0007 0.0001 -0.0005 0.0007 0.0001 -0.0005 0.0006 0.0001 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0007 0.0001 0.0007 0.0007 0.0002 0.0007 0.0004 0.0001 0.0004 0.0000 0.0000 0.0000 -0.0004 -0.0001 -0.0004 -0.0007 -0.0001 -0.0007 -0.0008 -0.0001 -0.0008 -0.0001 0.0000 -0.0001 -0.0007 0.0001 -0.0005 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0001 0.0002 -0.0006 0.0001 -0.0004 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 Z-ROTAN 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0001 -0.0001 0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0002 -0.0002 0.0002 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0003 -0.0002 0.0003 Page 99 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.1605 0.0444 -0.1173 -0.0048 0.0062 -0.0124 0.0012 0.0126 -0.0039 0.0440 0.0333 0.0391 -0.1628 0.0619 -0.1032 -0.0042 0.0040 -0.0134 0.0031 0.0106 -0.0040 0.0498 0.0361 0.0445 -0.1307 0.0769 -0.0622 -0.0039 0.0019 -0.0148 0.0051 0.0088 -0.0043 0.0506 0.0370 0.0449 -0.0934 0.0492 -0.0537 -0.0036 0.0000 -0.0165 0.0068 0.0075 -0.0046 0.0465 0.0364 0.0405 RADIANS) Y-TRANS -1.1659 -0.5171 -1.2748 -1.1403 -0.5072 -1.2329 -1.1309 -0.5251 -1.2109 -1.1357 -0.5773 -1.2015 -1.1042 -0.5828 -1.2780 -1.0774 -0.5690 -1.2329 -1.0705 -0.5837 -1.2105 -1.0809 -0.6325 -1.2020 -1.0422 -0.6497 -1.2817 -1.0145 -0.6317 -1.2332 -1.0100 -0.6433 -1.2104 -1.0257 -0.6877 -1.2022 -0.9777 -0.7152 -1.2831 -0.9513 -0.6952 -1.2338 -0.9492 -0.7039 -1.2106 -0.9698 -0.7428 -1.2020 100 STRUCTURE TYPE = SPACE Z-TRANS -0.1910 0.1882 -0.0033 -0.1939 0.1861 -0.0062 -0.1861 0.1777 -0.0064 -0.1652 0.1595 -0.0042 -0.1907 0.1883 -0.0028 -0.1925 0.1866 -0.0047 -0.1846 0.1783 -0.0048 -0.1657 0.1595 -0.0045 -0.1907 0.1879 -0.0031 -0.1912 0.1871 -0.0033 -0.1833 0.1789 -0.0034 -0.1663 0.1597 -0.0048 -0.1909 0.1896 -0.0015 -0.1900 0.1875 -0.0021 -0.1821 0.1792 -0.0022 -0.1668 0.1600 -0.0049 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0001 0.0002 0.0002 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0004 -0.0001 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0004 -0.0003 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 Z-ROTAN 0.0000 -0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0003 -0.0001 0.0003 0.0000 -0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 -0.0001 0.0003 0.0000 -0.0001 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 -0.0001 0.0003 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0002 Page 100 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0547 0.0161 -0.0485 -0.0033 -0.0016 -0.0179 0.0078 0.0070 -0.0048 0.0396 0.0348 0.0333 -0.0144 -0.0144 -0.0388 -0.0121 -0.0121 -0.0338 -0.0107 -0.0107 -0.0309 -0.0092 -0.0092 -0.0284 -0.0078 -0.0078 -0.0261 -0.0063 -0.0063 -0.0239 -0.0050 -0.0050 -0.0219 -0.0038 -0.0038 -0.0201 -0.0027 -0.0027 -0.0185 -0.0016 -0.0016 -0.0168 -0.0004 -0.0004 -0.0152 0.0010 0.0010 -0.0133 RADIANS) Y-TRANS -0.9130 -0.7816 -1.2846 -0.8879 -0.7595 -1.2344 -0.8882 -0.7652 -1.2108 -0.9112 -0.7978 -1.2002 -0.8489 -0.8489 -1.2869 -0.8449 -0.8449 -1.2793 -0.8408 -0.8408 -1.2717 -0.8370 -0.8370 -1.2646 -0.8337 -0.8337 -1.2579 -0.8307 -0.8307 -1.2515 -0.8281 -0.8281 -1.2456 -0.8259 -0.8259 -1.2401 -0.8240 -0.8240 -1.2350 -0.8232 -0.8232 -1.2310 -0.8226 -0.8226 -1.2275 -0.8225 -0.8225 -1.2242 101 STRUCTURE TYPE = SPACE Z-TRANS -0.1909 0.1894 -0.0016 -0.1887 0.1875 -0.0010 -0.1807 0.1794 -0.0011 -0.1667 0.1608 -0.0041 -0.1870 0.1870 0.0000 -0.1490 0.1490 0.0000 -0.0944 0.0944 0.0000 -0.0561 0.0561 0.0000 -0.0445 0.0445 0.0000 -0.0600 0.0600 0.0000 -0.1001 0.1001 0.0000 -0.1540 0.1540 0.0000 -0.1873 0.1873 0.0000 -0.1556 0.1556 0.0000 -0.1031 0.1031 0.0000 -0.0643 0.0643 0.0000 X-ROTAN -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0004 -0.0003 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0001 -0.0001 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0003 0.0003 0.0000 0.0000 0.0000 0.0000 0.0003 -0.0003 0.0000 0.0005 -0.0005 0.0000 0.0005 -0.0005 0.0000 0.0000 0.0000 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0003 0.0003 0.0000 Z-ROTAN 0.0002 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 -0.0002 0.0000 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 101 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0024 0.0024 -0.0115 0.0039 0.0039 -0.0097 0.0052 0.0052 -0.0080 0.0064 0.0064 -0.0064 0.0075 0.0075 -0.0050 0.0086 0.0086 -0.0035 0.0098 0.0098 -0.0020 0.0112 0.0112 -0.0002 0.0129 0.0129 0.0019 0.0148 0.0148 0.0043 0.0170 0.0170 0.0071 0.0199 0.0199 0.0110 0.0259 0.0259 0.0186 0.0161 -0.0547 -0.0485 -0.0016 -0.0033 -0.0179 0.0070 0.0078 -0.0048 RADIANS) Y-TRANS -0.8227 -0.8227 -1.2212 -0.8233 -0.8233 -1.2184 -0.8242 -0.8242 -1.2158 -0.8254 -0.8254 -1.2133 -0.8269 -0.8269 -1.2111 -0.8292 -0.8292 -1.2093 -0.8317 -0.8317 -1.2076 -0.8345 -0.8345 -1.2060 -0.8377 -0.8377 -1.2044 -0.8410 -0.8410 -1.2029 -0.8446 -0.8446 -1.2014 -0.8483 -0.8483 -1.1998 -0.8528 -0.8528 -1.1984 -0.7816 -0.9130 -1.2846 -0.7595 -0.8879 -1.2344 -0.7652 -0.8882 -1.2108 102 STRUCTURE TYPE = SPACE Z-TRANS -0.0499 0.0499 0.0000 -0.0618 0.0618 0.0000 -0.0981 0.0981 0.0000 -0.1485 0.1485 0.0000 -0.1792 0.1792 0.0000 -0.1449 0.1449 0.0000 -0.0887 0.0887 0.0000 -0.0448 0.0448 0.0000 -0.0243 0.0243 0.0000 -0.0296 0.0296 0.0000 -0.0617 0.0617 0.0000 -0.1145 0.1145 0.0000 -0.1620 0.1620 0.0000 -0.1894 0.1909 0.0016 -0.1875 0.1887 0.0010 -0.1794 0.1807 0.0011 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0004 0.0004 0.0000 -0.0005 0.0005 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0003 -0.0003 0.0000 0.0005 -0.0005 0.0000 0.0005 -0.0005 0.0000 0.0000 0.0000 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0003 0.0003 0.0000 -0.0001 0.0001 0.0000 0.0002 -0.0002 0.0000 0.0005 -0.0005 0.0000 0.0006 -0.0006 0.0000 0.0001 -0.0001 0.0000 0.0003 -0.0004 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 102 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0348 0.0396 0.0333 0.0492 -0.0934 -0.0537 0.0000 -0.0036 -0.0165 0.0075 0.0068 -0.0046 0.0364 0.0465 0.0405 0.0769 -0.1307 -0.0622 0.0019 -0.0039 -0.0148 0.0088 0.0051 -0.0043 0.0370 0.0506 0.0449 0.0619 -0.1628 -0.1032 0.0040 -0.0042 -0.0134 0.0106 0.0031 -0.0040 0.0361 0.0498 0.0445 0.0444 -0.1605 -0.1173 0.0062 -0.0048 -0.0124 0.0126 0.0012 -0.0039 RADIANS) Y-TRANS -0.7978 -0.9112 -1.2002 -0.7152 -0.9777 -1.2831 -0.6952 -0.9513 -1.2338 -0.7039 -0.9492 -1.2106 -0.7428 -0.9698 -1.2020 -0.6497 -1.0422 -1.2817 -0.6317 -1.0145 -1.2332 -0.6433 -1.0100 -1.2104 -0.6877 -1.0257 -1.2022 -0.5828 -1.1042 -1.2780 -0.5690 -1.0774 -1.2329 -0.5837 -1.0705 -1.2105 -0.6325 -1.0809 -1.2020 -0.5171 -1.1659 -1.2748 -0.5072 -1.1403 -1.2329 -0.5251 -1.1309 -1.2109 103 STRUCTURE TYPE = SPACE Z-TRANS -0.1608 0.1667 0.0041 -0.1896 0.1909 0.0015 -0.1875 0.1900 0.0021 -0.1792 0.1821 0.0022 -0.1600 0.1668 0.0049 -0.1879 0.1907 0.0031 -0.1871 0.1912 0.0033 -0.1789 0.1833 0.0034 -0.1597 0.1663 0.0048 -0.1883 0.1907 0.0028 -0.1866 0.1925 0.0047 -0.1783 0.1846 0.0048 -0.1595 0.1657 0.0045 -0.1882 0.1910 0.0033 -0.1861 0.1939 0.0062 -0.1777 0.1861 0.0064 X-ROTAN -0.0006 0.0006 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0001 0.0001 0.0003 -0.0004 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 -0.0004 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 -0.0002 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0002 -0.0002 0.0000 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0000 0.0002 -0.0001 0.0000 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0002 0.0003 -0.0002 0.0000 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0002 0.0003 -0.0002 0.0000 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 103 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0333 0.0440 0.0391 0.0302 -0.1185 -0.0933 0.0084 -0.0056 -0.0117 0.0145 -0.0003 -0.0038 0.0286 0.0332 0.0287 0.0206 -0.0531 -0.0437 0.0104 -0.0065 -0.0113 0.0155 -0.0010 -0.0040 0.0226 0.0184 0.0142 0.0107 -0.0143 -0.0176 0.0108 -0.0132 -0.0166 0.0109 -0.0121 -0.0155 0.0111 -0.0110 -0.0145 0.0114 -0.0101 -0.0135 0.0116 -0.0092 -0.0127 0.0118 -0.0084 -0.0119 RADIANS) Y-TRANS -0.5773 -1.1357 -1.2015 -0.4515 -1.2273 -1.2716 -0.4462 -1.2032 -1.2332 -0.4673 -1.1914 -1.2116 -0.5220 -1.1901 -1.2009 -0.3859 -1.2887 -1.2684 -0.3855 -1.2661 -1.2337 -0.4100 -1.2520 -1.2125 -0.4665 -1.2443 -1.2000 -0.3201 -1.3497 -1.2648 -0.3208 -1.3470 -1.2610 -0.3212 -1.3442 -1.2569 -0.3215 -1.3414 -1.2529 -0.3219 -1.3387 -1.2489 -0.3225 -1.3361 -1.2451 -0.3231 -1.3336 -1.2413 104 STRUCTURE TYPE = SPACE Z-TRANS -0.1595 0.1652 0.0042 -0.1881 0.1916 0.0040 -0.1856 0.1957 0.0080 -0.1772 0.1878 0.0082 -0.1595 0.1650 0.0041 -0.1880 0.1925 0.0050 -0.1853 0.1977 0.0101 -0.1768 0.1898 0.0102 -0.1594 0.1653 0.0045 -0.1879 0.1936 0.0060 -0.1738 0.2387 0.0597 -0.1592 0.3135 0.1396 -0.1493 0.3703 0.1987 -0.1470 0.3908 0.2186 -0.1527 0.3710 0.1957 -0.1644 0.3154 0.1356 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0001 -0.0007 0.0005 -0.0001 -0.0007 0.0005 -0.0002 -0.0007 0.0005 -0.0002 -0.0007 0.0005 -0.0001 -0.0007 0.0005 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 -0.0001 -0.0001 -0.0001 0.0006 0.0004 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0001 -0.0001 0.0007 0.0005 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0002 -0.0002 -0.0001 0.0000 -0.0001 -0.0002 -0.0007 -0.0008 -0.0001 -0.0007 -0.0008 -0.0001 -0.0004 -0.0004 0.0000 0.0000 0.0000 0.0001 0.0004 0.0004 0.0001 0.0007 0.0007 Z-ROTAN -0.0001 0.0003 0.0003 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0002 0.0003 0.0003 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0002 0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 104 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0120 -0.0077 -0.0112 0.0122 -0.0070 -0.0105 0.0125 -0.0063 -0.0099 0.0127 -0.0056 -0.0091 0.0131 -0.0048 -0.0083 0.0134 -0.0039 -0.0075 0.0138 -0.0031 -0.0067 0.0142 -0.0023 -0.0059 0.0145 -0.0015 -0.0051 0.0148 -0.0008 -0.0044 0.0150 -0.0001 -0.0038 0.0153 0.0006 -0.0030 0.0156 0.0015 -0.0022 0.0160 0.0024 -0.0013 0.0163 0.0034 -0.0003 0.0166 0.0045 0.0008 RADIANS) Y-TRANS -0.3239 -1.3312 -1.2377 -0.3249 -1.3287 -1.2340 -0.3274 -1.3266 -1.2312 -0.3302 -1.3245 -1.2285 -0.3332 -1.3224 -1.2258 -0.3364 -1.3203 -1.2232 -0.3400 -1.3183 -1.2206 -0.3439 -1.3163 -1.2181 -0.3481 -1.3143 -1.2156 -0.3526 -1.3122 -1.2131 -0.3591 -1.3106 -1.2115 -0.3657 -1.3089 -1.2098 -0.3727 -1.3072 -1.2081 -0.3799 -1.3055 -1.2064 -0.3873 -1.3038 -1.2046 -0.3950 -1.3021 -1.2028 105 STRUCTURE TYPE = SPACE Z-TRANS -0.1776 0.2425 0.0579 -0.1850 0.1998 0.0123 -0.1806 0.2425 0.0552 -0.1700 0.3149 0.1297 -0.1604 0.3696 0.1869 -0.1558 0.3885 0.2075 -0.1577 0.3672 0.1870 -0.1648 0.3102 0.1300 -0.1732 0.2358 0.0556 -0.1765 0.1920 0.0124 -0.1680 0.2340 0.0574 -0.1530 0.3062 0.1343 -0.1397 0.3616 0.1944 -0.1329 0.3819 0.2184 -0.1343 0.3620 0.2007 -0.1427 0.3041 0.1438 X-ROTAN -0.0006 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 -0.0001 -0.0007 0.0005 -0.0001 -0.0007 0.0005 -0.0001 -0.0007 0.0005 -0.0001 -0.0007 0.0005 -0.0001 -0.0007 0.0005 -0.0001 -0.0006 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0001 -0.0006 0.0005 -0.0001 -0.0007 0.0005 -0.0001 -0.0007 0.0004 -0.0001 -0.0007 0.0005 -0.0001 -0.0006 0.0005 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0001 0.0007 0.0007 0.0000 0.0000 0.0000 -0.0001 -0.0007 -0.0007 -0.0001 -0.0007 -0.0007 -0.0001 -0.0004 -0.0004 0.0000 0.0000 0.0000 0.0000 0.0004 0.0004 0.0001 0.0007 0.0007 0.0001 0.0007 0.0007 0.0000 0.0000 0.0000 -0.0001 -0.0007 -0.0007 -0.0002 -0.0007 -0.0007 -0.0001 -0.0004 -0.0004 0.0000 0.0000 0.0000 0.0001 0.0004 0.0004 0.0001 0.0007 0.0007 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 Page 105 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0169 0.0058 0.0021 0.0171 0.0075 0.0037 -0.0159 0.0118 -0.0203 -0.0151 0.0118 -0.0196 -0.0143 0.0119 -0.0188 -0.0134 0.0122 -0.0180 -0.0125 0.0125 -0.0171 -0.0116 0.0129 -0.0162 -0.0108 0.0134 -0.0153 -0.0100 0.0138 -0.0145 -0.0093 0.0144 -0.0137 -0.0085 0.0150 -0.0129 -0.0077 0.0156 -0.0120 -0.0069 0.0163 -0.0111 -0.0060 0.0170 -0.0101 -0.0051 0.0178 -0.0092 RADIANS) Y-TRANS -0.4028 -1.3002 -1.2009 -0.4107 -1.2979 -1.1985 -1.3496 -0.3202 -1.2647 -1.3474 -0.3209 -1.2613 -1.3448 -0.3214 -1.2575 -1.3421 -0.3219 -1.2536 -1.3394 -0.3224 -1.2496 -1.3367 -0.3228 -1.2456 -1.3340 -0.3234 -1.2417 -1.3314 -0.3241 -1.2379 -1.3288 -0.3251 -1.2341 -1.3268 -0.3277 -1.2315 -1.3249 -0.3305 -1.2288 -1.3229 -0.3336 -1.2263 -1.3209 -0.3369 -1.2237 -1.3188 -0.3404 -1.2211 106 STRUCTURE TYPE = SPACE Z-TRANS -0.1536 0.2241 0.0638 -0.1591 0.1672 0.0063 -0.2546 0.2536 -0.0024 -0.2876 0.2391 -0.0461 -0.3478 0.2262 -0.1125 -0.3955 0.2178 -0.1627 -0.4132 0.2161 -0.1797 -0.3977 0.2210 -0.1607 -0.3524 0.2306 -0.1103 -0.2938 0.2412 -0.0467 -0.2610 0.2473 -0.0106 -0.2948 0.2448 -0.0444 -0.3541 0.2373 -0.1057 -0.3996 0.2301 -0.1538 -0.4150 0.2263 -0.1711 -0.3967 0.2268 -0.1540 X-ROTAN -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0007 0.0002 -0.0002 0.0007 0.0004 -0.0001 0.0007 0.0005 0.0000 0.0007 0.0006 -0.0001 0.0007 0.0005 -0.0003 0.0007 0.0004 -0.0005 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0001 -0.0003 0.0007 0.0003 -0.0001 0.0007 0.0005 -0.0001 0.0007 0.0006 -0.0001 0.0007 0.0005 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0001 0.0008 0.0008 0.0000 0.0001 0.0001 0.0000 0.0001 0.0001 0.0006 0.0001 0.0006 0.0006 0.0001 0.0006 0.0003 0.0001 0.0004 0.0000 0.0000 0.0000 -0.0003 -0.0001 -0.0004 -0.0006 -0.0001 -0.0006 -0.0006 -0.0001 -0.0006 0.0000 0.0000 0.0000 0.0006 0.0001 0.0006 0.0006 0.0001 0.0006 0.0003 0.0001 0.0004 0.0000 0.0000 0.0000 -0.0004 0.0000 -0.0003 Z-ROTAN -0.0001 0.0000 0.0000 -0.0001 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 106 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0043 0.0186 -0.0083 -0.0035 0.0193 -0.0075 -0.0027 0.0200 -0.0067 -0.0020 0.0207 -0.0059 -0.0013 0.0214 -0.0051 -0.0005 0.0220 -0.0043 0.0004 0.0226 -0.0034 0.0012 0.0231 -0.0025 0.0021 0.0235 -0.0017 0.0029 0.0239 -0.0009 0.0035 0.0240 -0.0002 -0.0501 0.0263 -0.0384 -0.0085 0.0122 -0.0146 -0.0031 0.0210 -0.0062 -0.0025 0.0304 -0.0069 -0.1087 0.0407 -0.0779 RADIANS) Y-TRANS -1.3167 -0.3442 -1.2184 -1.3145 -0.3484 -1.2158 -1.3123 -0.3529 -1.2132 -1.3108 -0.3593 -1.2117 -1.3093 -0.3660 -1.2102 -1.3078 -0.3731 -1.2086 -1.3062 -0.3804 -1.2070 -1.3045 -0.3878 -1.2053 -1.3027 -0.3954 -1.2034 -1.3007 -0.4030 -1.2013 -1.2982 -0.4104 -1.1987 -1.2890 -0.3861 -1.2687 -1.2668 -0.3859 -1.2345 -1.2527 -0.4104 -1.2132 -1.2446 -0.4666 -1.2003 -1.2278 -0.4518 -1.2721 107 STRUCTURE TYPE = SPACE Z-TRANS -0.3481 0.2305 -0.1061 -0.2861 0.2349 -0.0449 -0.2507 0.2358 -0.0110 -0.2827 0.2286 -0.0467 -0.3407 0.2165 -0.1101 -0.3861 0.2057 -0.1610 -0.4028 0.1999 -0.1819 -0.3866 0.2004 -0.1684 -0.3385 0.2058 -0.1218 -0.2719 0.2127 -0.0559 -0.2209 0.2148 -0.0047 -0.2539 0.2537 -0.0017 -0.2595 0.2475 -0.0090 -0.2492 0.2360 -0.0095 -0.2206 0.2148 -0.0044 -0.2534 0.2537 -0.0011 X-ROTAN -0.0003 0.0007 0.0003 -0.0005 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0001 -0.0002 0.0006 0.0004 -0.0001 0.0007 0.0005 0.0000 0.0007 0.0006 -0.0001 0.0007 0.0005 -0.0002 0.0006 0.0003 -0.0004 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0006 0.0000 -0.0006 -0.0006 0.0000 -0.0006 0.0000 0.0000 0.0000 0.0005 0.0001 0.0006 0.0006 0.0001 0.0006 0.0003 0.0001 0.0004 0.0000 0.0000 0.0000 -0.0003 0.0000 -0.0003 -0.0006 -0.0001 -0.0006 -0.0007 -0.0001 -0.0007 -0.0003 0.0000 -0.0003 -0.0006 0.0001 -0.0004 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 -0.0005 0.0002 -0.0003 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0002 0.0000 0.0002 -0.0001 -0.0001 -0.0002 Page 107 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0077 0.0097 -0.0155 -0.0019 0.0198 -0.0060 0.0082 0.0362 0.0016 -0.1485 0.0557 -0.0991 -0.0069 0.0071 -0.0166 0.0003 0.0174 -0.0061 0.0189 0.0394 0.0091 -0.1523 0.0684 -0.0890 -0.0062 0.0044 -0.0180 0.0029 0.0146 -0.0063 0.0275 0.0410 0.0145 -0.1263 0.0651 -0.0655 -0.0058 0.0018 -0.0196 0.0057 0.0119 -0.0066 0.0334 0.0419 0.0174 -0.0054 -0.0006 -0.0213 RADIANS) Y-TRANS -1.2041 -0.4467 -1.2342 -1.1923 -0.4679 -1.2126 -1.1903 -0.5221 -1.2011 -1.1662 -0.5175 -1.2753 -1.1411 -0.5079 -1.2338 -1.1317 -0.5258 -1.2119 -1.1357 -0.5775 -1.2017 -1.1046 -0.5832 -1.2784 -1.0781 -0.5698 -1.2337 -1.0711 -0.5845 -1.2113 -1.0808 -0.6328 -1.2021 -1.0433 -0.6486 -1.2813 -1.0150 -0.6324 -1.2339 -1.0105 -0.6440 -1.2111 -1.0258 -0.6881 -1.2024 -0.9518 -0.6958 -1.2344 108 STRUCTURE TYPE = SPACE Z-TRANS -0.2581 0.2479 -0.0075 -0.2477 0.2365 -0.0079 -0.2203 0.2149 -0.0040 -0.2530 0.2538 -0.0007 -0.2567 0.2485 -0.0060 -0.2464 0.2371 -0.0064 -0.2203 0.2149 -0.0040 -0.2529 0.2539 -0.0005 -0.2555 0.2492 -0.0046 -0.2451 0.2378 -0.0050 -0.2206 0.2150 -0.0041 -0.2528 0.2537 -0.0006 -0.2544 0.2498 -0.0033 -0.2439 0.2386 -0.0036 -0.2209 0.2150 -0.0042 -0.2533 0.2503 -0.0022 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0001 -0.0002 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0001 0.0001 0.0001 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0003 -0.0001 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0002 0.0000 0.0003 -0.0002 0.0000 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 -0.0001 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 0.0000 0.0000 0.0000 Page 108 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0080 0.0099 -0.0069 0.0372 0.0419 0.0182 -0.0048 -0.0026 -0.0227 0.0094 0.0088 -0.0072 -0.0167 -0.0167 -0.0424 -0.0154 -0.0154 -0.0402 -0.0139 -0.0139 -0.0377 -0.0123 -0.0123 -0.0351 -0.0106 -0.0106 -0.0325 -0.0088 -0.0088 -0.0300 -0.0071 -0.0071 -0.0276 -0.0056 -0.0056 -0.0254 -0.0040 -0.0040 -0.0233 -0.0025 -0.0025 -0.0213 -0.0009 -0.0009 -0.0192 0.0009 0.0009 -0.0171 RADIANS) Y-TRANS -0.9497 -0.7044 -1.2111 -0.9711 -0.7433 -1.2029 -0.8883 -0.7599 -1.2349 -0.8887 -0.7656 -1.2113 -0.8508 -0.8508 -1.2890 -0.8459 -0.8459 -1.2809 -0.8418 -0.8418 -1.2732 -0.8382 -0.8382 -1.2660 -0.8348 -0.8348 -1.2592 -0.8317 -0.8317 -1.2527 -0.8288 -0.8288 -1.2465 -0.8264 -0.8264 -1.2407 -0.8244 -0.8244 -1.2354 -0.8236 -0.8236 -1.2316 -0.8233 -0.8233 -1.2282 -0.8235 -0.8235 -1.2252 109 STRUCTURE TYPE = SPACE Z-TRANS -0.2428 0.2393 -0.0024 -0.2208 0.2150 -0.0042 -0.2522 0.2507 -0.0011 -0.2415 0.2398 -0.0012 -0.2227 0.2227 0.0000 -0.1977 0.1977 0.0000 -0.1562 0.1562 0.0000 -0.1279 0.1279 0.0000 -0.1212 0.1212 0.0000 -0.1371 0.1371 0.0000 -0.1745 0.1745 0.0000 -0.2227 0.2227 0.0000 -0.2509 0.2509 0.0000 -0.2247 0.2247 0.0000 -0.1785 0.1785 0.0000 -0.1434 0.1434 0.0000 X-ROTAN -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0004 0.0004 0.0000 -0.0005 0.0005 0.0000 -0.0007 0.0007 0.0000 -0.0009 0.0009 0.0000 -0.0010 0.0010 0.0000 -0.0009 0.0009 0.0000 -0.0008 0.0008 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0007 0.0000 -0.0009 0.0009 0.0000 -0.0010 0.0010 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0002 0.0000 -0.0004 0.0004 0.0000 -0.0004 0.0004 0.0000 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0003 -0.0003 0.0000 0.0005 -0.0005 0.0000 0.0005 -0.0005 0.0000 0.0000 0.0000 0.0000 -0.0004 0.0004 0.0000 -0.0004 0.0004 0.0000 -0.0003 0.0003 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 109 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0027 0.0027 -0.0149 0.0045 0.0045 -0.0127 0.0062 0.0062 -0.0108 0.0077 0.0077 -0.0090 0.0092 0.0092 -0.0073 0.0106 0.0106 -0.0057 0.0121 0.0121 -0.0040 0.0137 0.0137 -0.0022 0.0155 0.0155 -0.0002 0.0173 0.0173 0.0020 0.0192 0.0192 0.0042 0.0210 0.0210 0.0064 0.0206 0.0206 0.0059 -0.0026 -0.0048 -0.0227 0.0088 0.0094 -0.0072 -0.0006 -0.0054 -0.0213 RADIANS) Y-TRANS -0.8238 -0.8238 -1.2223 -0.8242 -0.8242 -1.2194 -0.8249 -0.8249 -1.2165 -0.8259 -0.8259 -1.2139 -0.8273 -0.8273 -1.2115 -0.8297 -0.8297 -1.2098 -0.8325 -0.8325 -1.2084 -0.8357 -0.8357 -1.2072 -0.8391 -0.8391 -1.2059 -0.8424 -0.8424 -1.2044 -0.8458 -0.8458 -1.2027 -0.8493 -0.8493 -1.2010 -0.8499 -0.8499 -1.1958 -0.7599 -0.8883 -1.2349 -0.7656 -0.8887 -1.2113 -0.6958 -0.9518 -1.2344 110 STRUCTURE TYPE = SPACE Z-TRANS -0.1302 0.1302 0.0000 -0.1403 0.1403 0.0000 -0.1721 0.1721 0.0000 -0.2153 0.2153 0.0000 -0.2401 0.2401 0.0000 -0.2106 0.2106 0.0000 -0.1597 0.1597 0.0000 -0.1185 0.1185 0.0000 -0.0976 0.0976 0.0000 -0.0987 0.0987 0.0000 -0.1226 0.1226 0.0000 -0.1653 0.1653 0.0000 -0.2101 0.2101 0.0000 -0.2507 0.2522 0.0011 -0.2398 0.2415 0.0012 -0.2503 0.2533 0.0022 X-ROTAN -0.0010 0.0010 0.0000 -0.0009 0.0009 0.0000 -0.0008 0.0008 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0007 0.0000 -0.0008 0.0008 0.0000 -0.0009 0.0009 0.0000 -0.0009 0.0009 0.0000 -0.0009 0.0009 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0002 -0.0002 0.0000 0.0004 -0.0004 0.0000 0.0004 -0.0004 0.0000 0.0000 0.0000 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0003 0.0003 0.0000 -0.0001 0.0001 0.0000 0.0001 -0.0001 0.0000 0.0004 -0.0004 0.0000 0.0005 -0.0005 0.0000 0.0005 -0.0005 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 110 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0099 0.0080 -0.0069 0.0419 0.0372 0.0182 0.0651 -0.1263 -0.0655 0.0018 -0.0058 -0.0196 0.0119 0.0057 -0.0066 0.0419 0.0334 0.0174 0.0684 -0.1523 -0.0890 0.0044 -0.0062 -0.0180 0.0146 0.0029 -0.0063 0.0410 0.0275 0.0145 0.0557 -0.1485 -0.0991 0.0071 -0.0069 -0.0166 0.0174 0.0003 -0.0061 0.0394 0.0189 0.0091 0.0407 -0.1087 -0.0779 0.0097 -0.0077 -0.0155 RADIANS) Y-TRANS -0.7044 -0.9497 -1.2111 -0.7433 -0.9711 -1.2029 -0.6486 -1.0433 -1.2813 -0.6324 -1.0150 -1.2339 -0.6440 -1.0105 -1.2111 -0.6881 -1.0258 -1.2024 -0.5832 -1.1046 -1.2784 -0.5698 -1.0781 -1.2337 -0.5845 -1.0711 -1.2113 -0.6328 -1.0808 -1.2021 -0.5175 -1.1662 -1.2753 -0.5079 -1.1411 -1.2338 -0.5258 -1.1317 -1.2119 -0.5775 -1.1357 -1.2017 -0.4518 -1.2278 -1.2721 -0.4467 -1.2041 -1.2342 111 STRUCTURE TYPE = SPACE Z-TRANS -0.2393 0.2428 0.0024 -0.2150 0.2208 0.0042 -0.2538 0.2528 0.0006 -0.2498 0.2544 0.0033 -0.2386 0.2439 0.0036 -0.2150 0.2209 0.0042 -0.2539 0.2529 0.0005 -0.2492 0.2555 0.0046 -0.2378 0.2451 0.0050 -0.2150 0.2206 0.0041 -0.2538 0.2530 0.0007 -0.2485 0.2567 0.0060 -0.2371 0.2464 0.0064 -0.2149 0.2203 0.0040 -0.2537 0.2534 0.0011 -0.2479 0.2581 0.0075 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0003 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0002 0.0005 0.0003 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 0.0001 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 0.0000 -0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 -0.0001 -0.0001 -0.0002 0.0000 0.0000 0.0000 Page 111 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0198 -0.0019 -0.0060 0.0362 0.0082 0.0016 0.0263 -0.0501 -0.0384 0.0122 -0.0085 -0.0146 0.0210 -0.0031 -0.0062 0.0304 -0.0025 -0.0069 0.0118 -0.0159 -0.0203 0.0118 -0.0151 -0.0196 0.0119 -0.0143 -0.0188 0.0122 -0.0134 -0.0180 0.0125 -0.0125 -0.0171 0.0129 -0.0116 -0.0162 0.0134 -0.0108 -0.0153 0.0138 -0.0100 -0.0145 0.0144 -0.0093 -0.0137 0.0150 -0.0085 -0.0129 RADIANS) Y-TRANS -0.4679 -1.1923 -1.2126 -0.5221 -1.1903 -1.2011 -0.3861 -1.2890 -1.2687 -0.3859 -1.2668 -1.2345 -0.4104 -1.2527 -1.2132 -0.4666 -1.2446 -1.2003 -0.3202 -1.3496 -1.2647 -0.3209 -1.3474 -1.2613 -0.3214 -1.3448 -1.2575 -0.3219 -1.3421 -1.2536 -0.3224 -1.3394 -1.2496 -0.3228 -1.3367 -1.2456 -0.3234 -1.3340 -1.2417 -0.3241 -1.3314 -1.2379 -0.3251 -1.3288 -1.2341 -0.3277 -1.3268 -1.2315 112 STRUCTURE TYPE = SPACE Z-TRANS -0.2365 0.2477 0.0079 -0.2149 0.2203 0.0040 -0.2537 0.2539 0.0017 -0.2475 0.2595 0.0090 -0.2360 0.2492 0.0095 -0.2148 0.2206 0.0044 -0.2536 0.2546 0.0024 -0.2391 0.2876 0.0461 -0.2262 0.3478 0.1125 -0.2178 0.3955 0.1627 -0.2161 0.4132 0.1797 -0.2210 0.3977 0.1607 -0.2306 0.3524 0.1103 -0.2412 0.2938 0.0467 -0.2473 0.2610 0.0106 -0.2448 0.2948 0.0444 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0005 -0.0002 -0.0007 0.0002 -0.0004 -0.0007 0.0001 -0.0005 -0.0007 0.0000 -0.0006 -0.0007 0.0001 -0.0005 -0.0007 0.0003 -0.0004 -0.0006 0.0005 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0001 0.0006 0.0004 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 -0.0006 -0.0006 -0.0001 -0.0006 -0.0006 -0.0001 -0.0003 -0.0004 0.0000 0.0000 0.0000 0.0001 0.0003 0.0004 0.0001 0.0006 0.0006 0.0001 0.0006 0.0006 0.0000 0.0000 0.0000 -0.0001 -0.0006 -0.0006 Z-ROTAN -0.0001 0.0000 0.0000 0.0000 0.0002 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 112 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0156 -0.0077 -0.0120 0.0163 -0.0069 -0.0111 0.0170 -0.0060 -0.0101 0.0178 -0.0051 -0.0092 0.0186 -0.0043 -0.0083 0.0193 -0.0035 -0.0075 0.0200 -0.0027 -0.0067 0.0207 -0.0020 -0.0059 0.0214 -0.0013 -0.0051 0.0220 -0.0005 -0.0043 0.0226 0.0004 -0.0034 0.0231 0.0012 -0.0025 0.0235 0.0021 -0.0017 0.0239 0.0029 -0.0009 0.0240 0.0035 -0.0002 -0.0172 0.0128 -0.0228 RADIANS) Y-TRANS -0.3305 -1.3249 -1.2288 -0.3336 -1.3229 -1.2263 -0.3369 -1.3209 -1.2237 -0.3404 -1.3188 -1.2211 -0.3442 -1.3167 -1.2184 -0.3484 -1.3145 -1.2158 -0.3529 -1.3123 -1.2132 -0.3593 -1.3108 -1.2117 -0.3660 -1.3093 -1.2102 -0.3731 -1.3078 -1.2086 -0.3804 -1.3062 -1.2070 -0.3878 -1.3045 -1.2053 -0.3954 -1.3027 -1.2034 -0.4030 -1.3007 -1.2013 -0.4104 -1.2982 -1.1987 -1.3495 -0.3204 -1.2646 113 STRUCTURE TYPE = SPACE Z-TRANS -0.2373 0.3541 0.1057 -0.2301 0.3996 0.1538 -0.2263 0.4150 0.1711 -0.2268 0.3967 0.1540 -0.2305 0.3481 0.1061 -0.2349 0.2861 0.0449 -0.2358 0.2507 0.0110 -0.2286 0.2827 0.0467 -0.2165 0.3407 0.1101 -0.2057 0.3861 0.1610 -0.1999 0.4028 0.1819 -0.2004 0.3866 0.1684 -0.2058 0.3385 0.1218 -0.2127 0.2719 0.0559 -0.2148 0.2209 0.0047 -0.3150 0.3194 0.0018 X-ROTAN -0.0007 0.0003 -0.0003 -0.0007 0.0001 -0.0005 -0.0007 0.0001 -0.0006 -0.0007 0.0001 -0.0005 -0.0007 0.0003 -0.0003 -0.0006 0.0005 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0001 -0.0006 0.0002 -0.0004 -0.0007 0.0001 -0.0005 -0.0007 0.0000 -0.0006 -0.0007 0.0001 -0.0005 -0.0006 0.0002 -0.0003 -0.0006 0.0004 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0007 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0001 -0.0006 -0.0006 -0.0001 -0.0003 -0.0004 0.0000 0.0000 0.0000 0.0000 0.0004 0.0003 0.0000 0.0006 0.0006 0.0000 0.0006 0.0006 0.0000 0.0000 0.0000 -0.0001 -0.0005 -0.0006 -0.0001 -0.0006 -0.0006 -0.0001 -0.0003 -0.0004 0.0000 0.0000 0.0000 0.0000 0.0003 0.0003 0.0001 0.0006 0.0006 0.0001 0.0007 0.0007 0.0000 0.0003 0.0003 -0.0001 0.0002 0.0001 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 Page 113 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0169 0.0128 -0.0225 -0.0164 0.0129 -0.0221 -0.0158 0.0131 -0.0215 -0.0150 0.0135 -0.0207 -0.0141 0.0141 -0.0197 -0.0133 0.0147 -0.0189 -0.0124 0.0155 -0.0179 -0.0116 0.0164 -0.0169 -0.0107 0.0175 -0.0158 -0.0098 0.0185 -0.0148 -0.0090 0.0195 -0.0138 -0.0081 0.0206 -0.0128 -0.0071 0.0218 -0.0117 -0.0063 0.0228 -0.0108 -0.0055 0.0240 -0.0098 -0.0046 0.0253 -0.0088 RADIANS) Y-TRANS -1.3476 -0.3210 -1.2615 -1.3451 -0.3216 -1.2578 -1.3426 -0.3222 -1.2540 -1.3400 -0.3228 -1.2502 -1.3372 -0.3232 -1.2461 -1.3343 -0.3236 -1.2420 -1.3316 -0.3243 -1.2381 -1.3289 -0.3254 -1.2343 -1.3270 -0.3279 -1.2316 -1.3252 -0.3307 -1.2291 -1.3233 -0.3340 -1.2267 -1.3214 -0.3374 -1.2242 -1.3192 -0.3408 -1.2215 -1.3169 -0.3445 -1.2187 -1.3147 -0.3486 -1.2160 -1.3125 -0.3532 -1.2133 114 STRUCTURE TYPE = SPACE Z-TRANS -0.3295 0.3050 -0.0250 -0.3651 0.2934 -0.0679 -0.3932 0.2864 -0.0992 -0.4040 0.2853 -0.1094 -0.3963 0.2894 -0.0980 -0.3720 0.2967 -0.0681 -0.3386 0.3045 -0.0291 -0.3214 0.3093 -0.0082 -0.3410 0.3086 -0.0276 -0.3766 0.3042 -0.0653 -0.4027 0.2995 -0.0942 -0.4110 0.2968 -0.1044 -0.3996 0.2961 -0.0943 -0.3696 0.2962 -0.0658 -0.3304 0.2963 -0.0284 -0.3087 0.2947 -0.0089 X-ROTAN -0.0004 0.0007 0.0002 -0.0001 0.0007 0.0005 0.0001 0.0007 0.0007 0.0002 0.0007 0.0008 0.0001 0.0007 0.0007 -0.0002 0.0007 0.0005 -0.0004 0.0006 0.0002 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0002 -0.0002 0.0007 0.0004 0.0001 0.0007 0.0007 0.0001 0.0007 0.0008 0.0001 0.0007 0.0007 -0.0002 0.0007 0.0004 -0.0004 0.0006 0.0002 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0003 0.0001 0.0004 0.0003 0.0001 0.0004 0.0002 0.0000 0.0002 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0002 -0.0003 -0.0001 -0.0004 -0.0003 -0.0001 -0.0003 0.0000 0.0000 0.0000 0.0003 0.0000 0.0003 0.0003 0.0000 0.0004 0.0002 0.0000 0.0002 0.0000 0.0000 0.0000 -0.0002 0.0000 -0.0002 -0.0004 0.0000 -0.0004 -0.0003 0.0000 -0.0003 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 Page 114 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0038 0.0265 -0.0079 -0.0030 0.0276 -0.0070 -0.0023 0.0285 -0.0062 -0.0016 0.0293 -0.0055 -0.0009 0.0300 -0.0048 -0.0004 0.0304 -0.0043 -0.0001 0.0307 -0.0040 0.0000 0.0308 -0.0039 -0.0467 0.0287 -0.0347 -0.0105 0.0139 -0.0179 -0.0052 0.0265 -0.0084 -0.0138 0.0339 -0.0195 -0.0948 0.0438 -0.0636 -0.0097 0.0110 -0.0192 -0.0036 0.0250 -0.0083 -0.0112 0.0374 -0.0205 RADIANS) Y-TRANS -1.3110 -0.3595 -1.2119 -1.3096 -0.3663 -1.2105 -1.3082 -0.3735 -1.2091 -1.3067 -0.3809 -1.2076 -1.3050 -0.3882 -1.2058 -1.3030 -0.3956 -1.2038 -1.3009 -0.4031 -1.2016 -1.2983 -0.4105 -1.1988 -1.2891 -0.3862 -1.2689 -1.2673 -0.3862 -1.2350 -1.2532 -0.4107 -1.2137 -1.2446 -0.4666 -1.2003 -1.2280 -0.4519 -1.2724 -1.2046 -0.4471 -1.2348 -1.1928 -0.4682 -1.2131 -1.1904 -0.5222 -1.2012 115 STRUCTURE TYPE = SPACE Z-TRANS -0.3248 0.2888 -0.0295 -0.3573 0.2796 -0.0686 -0.3814 0.2712 -0.0992 -0.3906 0.2668 -0.1127 -0.3824 0.2665 -0.1070 -0.3548 0.2684 -0.0817 -0.3120 0.2708 -0.0404 -0.2749 0.2706 -0.0035 -0.3148 0.3194 0.0020 -0.3208 0.3095 -0.0075 -0.3081 0.2949 -0.0083 -0.2749 0.2705 -0.0034 -0.3146 0.3194 0.0022 -0.3202 0.3100 -0.0067 -0.3074 0.2954 -0.0075 -0.2749 0.2704 -0.0034 X-ROTAN -0.0004 0.0006 0.0002 -0.0001 0.0006 0.0005 0.0001 0.0006 0.0007 0.0002 0.0007 0.0008 0.0001 0.0007 0.0007 -0.0001 0.0006 0.0004 -0.0004 0.0006 0.0002 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0003 0.0001 0.0003 0.0003 0.0001 0.0004 0.0001 0.0001 0.0002 0.0000 0.0000 0.0000 -0.0002 0.0000 -0.0001 -0.0004 0.0000 -0.0003 -0.0004 0.0000 -0.0004 -0.0003 0.0000 -0.0003 -0.0004 0.0002 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0005 0.0001 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 Z-ROTAN 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0001 0.0000 0.0001 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0002 0.0000 0.0002 Page 115 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.1305 0.0553 -0.0831 -0.0089 0.0079 -0.0207 -0.0007 0.0221 -0.0084 -0.0028 0.0396 -0.0169 -0.1380 0.0582 -0.0833 -0.0082 0.0047 -0.0224 0.0027 0.0186 -0.0086 0.0062 0.0407 -0.0127 -0.1211 0.0469 -0.0735 -0.0076 0.0016 -0.0243 0.0062 0.0152 -0.0089 0.0139 0.0412 -0.0096 -0.0071 -0.0012 -0.0261 0.0092 0.0123 -0.0092 0.0203 0.0413 -0.0074 -0.0064 -0.0036 -0.0275 RADIANS) Y-TRANS -1.1664 -0.5177 -1.2755 -1.1416 -0.5084 -1.2344 -1.1322 -0.5263 -1.2124 -1.1357 -0.5777 -1.2018 -1.1050 -0.5833 -1.2786 -1.0785 -0.5702 -1.2343 -1.0716 -0.5850 -1.2119 -1.0809 -0.6330 -1.2022 -1.0438 -0.6488 -1.2818 -1.0154 -0.6328 -1.2344 -1.0108 -0.6445 -1.2116 -1.0261 -0.6882 -1.2026 -0.9521 -0.6962 -1.2348 -0.9500 -0.7048 -1.2116 -0.9714 -0.7435 -1.2032 -0.8887 -0.7602 -1.2354 116 STRUCTURE TYPE = SPACE Z-TRANS -0.3145 0.3194 0.0023 -0.3194 0.3107 -0.0057 -0.3066 0.2963 -0.0064 -0.2751 0.2704 -0.0035 -0.3144 0.3193 0.0023 -0.3185 0.3116 -0.0045 -0.3056 0.2973 -0.0051 -0.2752 0.2704 -0.0035 -0.3143 0.3193 0.0024 -0.3177 0.3126 -0.0032 -0.3046 0.2985 -0.0038 -0.2753 0.2703 -0.0036 -0.3168 0.3136 -0.0021 -0.3036 0.2996 -0.0025 -0.2753 0.2704 -0.0036 -0.3160 0.3143 -0.0010 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0002 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0002 -0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0002 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0002 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 -0.0001 0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 0.0000 0.0000 0.0000 Page 116 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0111 0.0107 -0.0095 -0.0200 -0.0200 -0.0479 -0.0188 -0.0188 -0.0463 -0.0172 -0.0172 -0.0441 -0.0157 -0.0157 -0.0418 -0.0135 -0.0135 -0.0389 -0.0113 -0.0113 -0.0360 -0.0095 -0.0095 -0.0335 -0.0074 -0.0074 -0.0308 -0.0054 -0.0054 -0.0281 -0.0033 -0.0033 -0.0255 -0.0012 -0.0012 -0.0229 0.0007 0.0007 -0.0207 0.0030 0.0030 -0.0181 0.0052 0.0052 -0.0157 0.0071 0.0071 -0.0137 RADIANS) Y-TRANS -0.8891 -0.7659 -1.2117 -0.8515 -0.8515 -1.2897 -0.8466 -0.8466 -1.2818 -0.8424 -0.8424 -1.2741 -0.8392 -0.8392 -1.2673 -0.8362 -0.8362 -1.2608 -0.8327 -0.8327 -1.2538 -0.8294 -0.8294 -1.2471 -0.8268 -0.8268 -1.2412 -0.8248 -0.8248 -1.2359 -0.8241 -0.8241 -1.2321 -0.8239 -0.8239 -1.2288 -0.8244 -0.8244 -1.2262 -0.8251 -0.8251 -1.2236 -0.8252 -0.8252 -1.2204 -0.8254 -0.8254 -1.2171 117 STRUCTURE TYPE = SPACE Z-TRANS -0.3026 0.3006 -0.0012 -0.2681 0.2681 0.0000 -0.2533 0.2533 0.0000 -0.2348 0.2348 0.0000 -0.2258 0.2258 0.0000 -0.2274 0.2274 0.0000 -0.2398 0.2398 0.0000 -0.2648 0.2648 0.0000 -0.2971 0.2971 0.0000 -0.3150 0.3150 0.0000 -0.2996 0.2996 0.0000 -0.2699 0.2699 0.0000 -0.2480 0.2480 0.0000 -0.2401 0.2401 0.0000 -0.2451 0.2451 0.0000 -0.2625 0.2625 0.0000 X-ROTAN -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0008 0.0008 0.0000 -0.0011 0.0011 0.0000 -0.0012 0.0012 0.0000 -0.0011 0.0011 0.0000 -0.0009 0.0009 0.0000 -0.0008 0.0008 0.0000 -0.0006 0.0006 0.0000 -0.0008 0.0008 0.0000 -0.0010 0.0010 0.0000 -0.0011 0.0011 0.0000 -0.0012 0.0012 0.0000 -0.0011 0.0011 0.0000 -0.0009 0.0009 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 -0.0001 0.0001 0.0000 -0.0002 0.0002 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0002 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0000 0.0000 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0002 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 117 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0090 0.0090 -0.0116 0.0109 0.0109 -0.0096 0.0128 0.0128 -0.0077 0.0146 0.0146 -0.0058 0.0162 0.0162 -0.0042 0.0181 0.0181 -0.0023 0.0198 0.0198 -0.0005 0.0208 0.0208 0.0005 0.0211 0.0211 0.0009 0.0213 0.0213 0.0010 -0.0036 -0.0064 -0.0275 0.0107 0.0111 -0.0095 -0.0012 -0.0071 -0.0261 0.0123 0.0092 -0.0092 0.0413 0.0203 -0.0074 0.0469 -0.1211 -0.0735 RADIANS) Y-TRANS -0.8263 -0.8263 -1.2143 -0.8277 -0.8277 -1.2120 -0.8302 -0.8302 -1.2103 -0.8331 -0.8331 -1.2090 -0.8368 -0.8368 -1.2082 -0.8405 -0.8405 -1.2074 -0.8436 -0.8436 -1.2057 -0.8465 -0.8465 -1.2034 -0.8487 -0.8487 -1.2003 -0.8499 -0.8499 -1.1960 -0.7602 -0.8887 -1.2354 -0.7659 -0.8891 -1.2117 -0.6962 -0.9521 -1.2348 -0.7048 -0.9500 -1.2116 -0.7435 -0.9714 -1.2032 -0.6488 -1.0438 -1.2818 118 STRUCTURE TYPE = SPACE Z-TRANS -0.2881 0.2881 0.0000 -0.3014 0.3014 0.0000 -0.2824 0.2824 0.0000 -0.2476 0.2476 0.0000 -0.2195 0.2195 0.0000 -0.2040 0.2040 0.0000 -0.1989 0.1989 0.0000 -0.2059 0.2059 0.0000 -0.2303 0.2303 0.0000 -0.2625 0.2625 0.0000 -0.3143 0.3160 0.0010 -0.3006 0.3026 0.0012 -0.3136 0.3168 0.0021 -0.2996 0.3036 0.0025 -0.2704 0.2753 0.0036 -0.3193 0.3143 -0.0024 X-ROTAN -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0007 0.0000 -0.0009 0.0009 0.0000 -0.0011 0.0011 0.0000 -0.0012 0.0012 0.0000 -0.0011 0.0011 0.0000 -0.0009 0.0009 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0002 0.0002 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0002 -0.0002 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0002 -0.0002 -0.0001 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 -0.0001 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 0.0002 -0.0001 0.0001 Page 118 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0016 -0.0076 -0.0243 0.0152 0.0062 -0.0089 0.0412 0.0139 -0.0096 0.0582 -0.1380 -0.0833 0.0047 -0.0082 -0.0224 0.0186 0.0027 -0.0086 0.0407 0.0062 -0.0127 0.0553 -0.1305 -0.0831 0.0079 -0.0089 -0.0207 0.0221 -0.0007 -0.0084 0.0396 -0.0028 -0.0169 0.0438 -0.0948 -0.0636 0.0110 -0.0097 -0.0192 0.0250 -0.0036 -0.0083 0.0374 -0.0112 -0.0205 0.0287 -0.0467 -0.0347 RADIANS) Y-TRANS -0.6328 -1.0154 -1.2344 -0.6445 -1.0108 -1.2116 -0.6882 -1.0261 -1.2026 -0.5833 -1.1050 -1.2786 -0.5702 -1.0785 -1.2343 -0.5850 -1.0716 -1.2119 -0.6330 -1.0809 -1.2022 -0.5177 -1.1664 -1.2755 -0.5084 -1.1416 -1.2344 -0.5263 -1.1322 -1.2124 -0.5777 -1.1357 -1.2018 -0.4519 -1.2280 -1.2724 -0.4471 -1.2046 -1.2348 -0.4682 -1.1928 -1.2131 -0.5222 -1.1904 -1.2012 -0.3862 -1.2891 -1.2689 119 STRUCTURE TYPE = SPACE Z-TRANS -0.3126 0.3177 0.0032 -0.2985 0.3046 0.0038 -0.2703 0.2753 0.0036 -0.3193 0.3144 -0.0023 -0.3116 0.3185 0.0045 -0.2973 0.3056 0.0051 -0.2704 0.2752 0.0035 -0.3194 0.3145 -0.0023 -0.3107 0.3194 0.0057 -0.2963 0.3066 0.0064 -0.2704 0.2751 0.0035 -0.3194 0.3146 -0.0022 -0.3100 0.3202 0.0067 -0.2954 0.3074 0.0075 -0.2704 0.2749 0.0034 -0.3194 0.3148 -0.0020 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0005 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0002 0.0004 0.0003 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 0.0000 -0.0002 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0002 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0002 0.0002 0.0000 0.0000 0.0000 Page 119 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0139 -0.0105 -0.0179 0.0265 -0.0052 -0.0084 0.0339 -0.0138 -0.0195 0.0128 -0.0172 -0.0228 0.0128 -0.0169 -0.0225 0.0129 -0.0164 -0.0221 0.0131 -0.0158 -0.0215 0.0135 -0.0150 -0.0207 0.0141 -0.0141 -0.0197 0.0147 -0.0133 -0.0189 0.0155 -0.0124 -0.0179 0.0164 -0.0116 -0.0169 0.0175 -0.0107 -0.0158 0.0185 -0.0098 -0.0148 0.0195 -0.0090 -0.0138 0.0206 -0.0081 -0.0128 RADIANS) Y-TRANS -0.3862 -1.2673 -1.2350 -0.4107 -1.2532 -1.2137 -0.4666 -1.2446 -1.2003 -0.3204 -1.3495 -1.2646 -0.3210 -1.3476 -1.2615 -0.3216 -1.3451 -1.2578 -0.3222 -1.3426 -1.2540 -0.3228 -1.3400 -1.2502 -0.3232 -1.3372 -1.2461 -0.3236 -1.3343 -1.2420 -0.3243 -1.3316 -1.2381 -0.3254 -1.3289 -1.2343 -0.3279 -1.3270 -1.2316 -0.3307 -1.3252 -1.2291 -0.3340 -1.3233 -1.2267 -0.3374 -1.3214 -1.2242 120 STRUCTURE TYPE = SPACE Z-TRANS -0.3095 0.3208 0.0075 -0.2949 0.3081 0.0083 -0.2705 0.2749 0.0034 -0.3194 0.3150 -0.0018 -0.3050 0.3295 0.0250 -0.2934 0.3651 0.0679 -0.2864 0.3932 0.0992 -0.2853 0.4040 0.1094 -0.2894 0.3963 0.0980 -0.2967 0.3720 0.0681 -0.3045 0.3386 0.0291 -0.3093 0.3214 0.0082 -0.3086 0.3410 0.0276 -0.3042 0.3766 0.0653 -0.2995 0.4027 0.0942 -0.2968 0.4110 0.1044 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0007 0.0004 -0.0002 -0.0007 0.0001 -0.0005 -0.0007 -0.0001 -0.0007 -0.0007 -0.0002 -0.0008 -0.0007 -0.0001 -0.0007 -0.0007 0.0002 -0.0005 -0.0006 0.0004 -0.0002 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0002 -0.0007 0.0002 -0.0004 -0.0007 -0.0001 -0.0007 -0.0007 -0.0001 -0.0008 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0002 0.0001 -0.0001 -0.0001 -0.0003 -0.0004 -0.0001 -0.0003 -0.0004 0.0000 -0.0002 -0.0002 0.0000 0.0000 0.0000 0.0001 0.0001 0.0002 0.0001 0.0003 0.0004 0.0001 0.0003 0.0003 0.0000 0.0000 0.0000 0.0000 -0.0003 -0.0003 0.0000 -0.0003 -0.0004 0.0000 -0.0002 -0.0002 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 120 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0218 -0.0071 -0.0117 0.0228 -0.0063 -0.0108 0.0240 -0.0055 -0.0098 0.0253 -0.0046 -0.0088 0.0265 -0.0038 -0.0079 0.0276 -0.0030 -0.0070 0.0285 -0.0023 -0.0062 0.0293 -0.0016 -0.0055 0.0300 -0.0009 -0.0048 0.0304 -0.0004 -0.0043 0.0307 -0.0001 -0.0040 0.0308 0.0000 -0.0039 -0.0184 0.0135 -0.0253 -0.0188 0.0135 -0.0256 -0.0186 0.0136 -0.0255 -0.0181 0.0139 -0.0251 RADIANS) Y-TRANS -0.3408 -1.3192 -1.2215 -0.3445 -1.3169 -1.2187 -0.3486 -1.3147 -1.2160 -0.3532 -1.3125 -1.2133 -0.3595 -1.3110 -1.2119 -0.3663 -1.3096 -1.2105 -0.3735 -1.3082 -1.2091 -0.3809 -1.3067 -1.2076 -0.3882 -1.3050 -1.2058 -0.3956 -1.3030 -1.2038 -0.4031 -1.3009 -1.2016 -0.4105 -1.2983 -1.1988 -1.3493 -0.3204 -1.2644 -1.3477 -0.3211 -1.2615 -1.3453 -0.3217 -1.2580 -1.3428 -0.3223 -1.2542 121 STRUCTURE TYPE = SPACE Z-TRANS -0.2961 0.3996 0.0943 -0.2962 0.3696 0.0658 -0.2963 0.3304 0.0284 -0.2947 0.3087 0.0089 -0.2888 0.3248 0.0295 -0.2796 0.3573 0.0686 -0.2712 0.3814 0.0992 -0.2668 0.3906 0.1127 -0.2665 0.3824 0.1070 -0.2684 0.3548 0.0817 -0.2708 0.3120 0.0404 -0.2706 0.2749 0.0035 -0.3747 0.3851 0.0067 -0.3674 0.3709 -0.0001 -0.3782 0.3602 -0.0194 -0.3831 0.3541 -0.0283 X-ROTAN -0.0007 -0.0001 -0.0007 -0.0007 0.0002 -0.0004 -0.0006 0.0004 -0.0002 -0.0006 0.0006 0.0000 -0.0006 0.0004 -0.0002 -0.0006 0.0001 -0.0005 -0.0006 -0.0001 -0.0007 -0.0007 -0.0002 -0.0008 -0.0007 -0.0001 -0.0007 -0.0006 0.0001 -0.0004 -0.0006 0.0004 -0.0002 -0.0006 0.0005 0.0000 -0.0006 0.0007 0.0001 -0.0004 0.0007 0.0003 -0.0001 0.0007 0.0005 0.0001 0.0007 0.0007 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0002 0.0002 0.0000 0.0004 0.0004 0.0000 0.0003 0.0003 0.0000 0.0000 0.0000 -0.0001 -0.0003 -0.0003 -0.0001 -0.0003 -0.0004 -0.0001 -0.0001 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0002 0.0001 0.0000 0.0004 0.0003 0.0000 0.0004 0.0004 0.0000 0.0003 0.0003 -0.0002 0.0002 0.0000 0.0001 0.0001 0.0002 0.0002 0.0001 0.0002 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 121 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0176 0.0142 -0.0245 -0.0169 0.0147 -0.0237 -0.0160 0.0155 -0.0227 -0.0150 0.0167 -0.0216 -0.0138 0.0183 -0.0201 -0.0127 0.0200 -0.0185 -0.0117 0.0215 -0.0174 -0.0108 0.0228 -0.0163 -0.0101 0.0241 -0.0154 -0.0094 0.0254 -0.0145 -0.0085 0.0269 -0.0135 -0.0076 0.0286 -0.0124 -0.0065 0.0307 -0.0109 -0.0054 0.0328 -0.0095 -0.0045 0.0343 -0.0086 -0.0038 0.0356 -0.0078 RADIANS) Y-TRANS -1.3407 -0.3235 -1.2509 -1.3373 -0.3233 -1.2463 -1.3345 -0.3238 -1.2422 -1.3318 -0.3246 -1.2383 -1.3291 -0.3257 -1.2344 -1.3272 -0.3281 -1.2319 -1.3253 -0.3310 -1.2293 -1.3235 -0.3342 -1.2269 -1.3221 -0.3382 -1.2250 -1.3194 -0.3410 -1.2216 -1.3171 -0.3448 -1.2189 -1.3149 -0.3489 -1.2162 -1.3126 -0.3536 -1.2135 -1.3112 -0.3598 -1.2121 -1.3098 -0.3666 -1.2106 -1.3084 -0.3737 -1.2092 122 STRUCTURE TYPE = SPACE Z-TRANS -0.3708 0.3539 -0.0161 -0.3868 0.3571 -0.0275 -0.3873 0.3624 -0.0217 -0.3796 0.3678 -0.0077 -0.3816 0.3705 -0.0058 -0.3834 0.3724 -0.0072 -0.3951 0.3707 -0.0212 -0.3980 0.3682 -0.0274 -0.3844 0.3676 -0.0155 -0.3951 0.3651 -0.0273 -0.3872 0.3617 -0.0216 -0.3710 0.3576 -0.0082 -0.3664 0.3526 -0.0068 -0.3629 0.3489 -0.0085 -0.3690 0.3421 -0.0226 -0.3675 0.3355 -0.0290 X-ROTAN 0.0004 0.0007 0.0010 0.0001 0.0007 0.0007 -0.0002 0.0007 0.0005 -0.0004 0.0006 0.0002 -0.0006 0.0006 0.0000 -0.0004 0.0006 0.0002 -0.0002 0.0007 0.0004 0.0000 0.0007 0.0007 0.0004 0.0007 0.0010 0.0000 0.0007 0.0007 -0.0002 0.0007 0.0004 -0.0004 0.0006 0.0002 -0.0006 0.0006 0.0000 -0.0004 0.0006 0.0002 -0.0001 0.0006 0.0005 0.0001 0.0006 0.0007 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0002 -0.0001 0.0000 -0.0002 0.0000 0.0000 0.0000 0.0001 0.0000 0.0001 0.0001 0.0000 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0000 -0.0002 -0.0002 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0001 0.0001 0.0002 0.0001 0.0001 0.0002 0.0000 0.0001 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 Page 122 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0033 0.0364 -0.0073 -0.0030 0.0371 -0.0069 -0.0027 0.0376 -0.0067 -0.0027 0.0379 -0.0068 -0.0031 0.0379 -0.0072 -0.0428 0.0296 -0.0317 -0.0126 0.0155 -0.0212 -0.0074 0.0321 -0.0107 -0.0224 0.0384 -0.0294 -0.0836 0.0437 -0.0540 -0.0116 0.0122 -0.0228 -0.0053 0.0303 -0.0105 -0.0271 0.0393 -0.0391 -0.1167 0.0512 -0.0734 -0.0108 0.0086 -0.0247 -0.0018 0.0268 -0.0106 RADIANS) Y-TRANS -1.3075 -0.3816 -1.2083 -1.3051 -0.3883 -1.2059 -1.3032 -0.3957 -1.2039 -1.3010 -0.4032 -1.2016 -1.2982 -0.4106 -1.1987 -1.2891 -0.3862 -1.2689 -1.2673 -0.3863 -1.2351 -1.2532 -0.4108 -1.2138 -1.2446 -0.4665 -1.2003 -1.2280 -0.4520 -1.2724 -1.2048 -0.4473 -1.2350 -1.1930 -0.4685 -1.2134 -1.1904 -0.5222 -1.2012 -1.1665 -0.5177 -1.2756 -1.1418 -0.5086 -1.2348 -1.1325 -0.5266 -1.2128 123 STRUCTURE TYPE = SPACE Z-TRANS -0.3519 0.3331 -0.0178 -0.3694 0.3317 -0.0370 -0.3662 0.3304 -0.0368 -0.3474 0.3290 -0.0203 -0.3282 0.3265 -0.0015 -0.3755 0.3851 0.0060 -0.3826 0.3708 -0.0067 -0.3674 0.3529 -0.0078 -0.3289 0.3263 -0.0022 -0.3758 0.3851 0.0056 -0.3827 0.3715 -0.0065 -0.3674 0.3537 -0.0076 -0.3294 0.3260 -0.0026 -0.3759 0.3850 0.0055 -0.3822 0.3726 -0.0056 -0.3670 0.3550 -0.0067 X-ROTAN 0.0005 0.0007 0.0011 0.0001 0.0007 0.0007 -0.0001 0.0006 0.0004 -0.0003 0.0006 0.0002 -0.0005 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0002 0.0000 -0.0002 -0.0003 0.0000 -0.0002 -0.0002 0.0000 -0.0002 -0.0004 0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 -0.0004 0.0001 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0001 0.0000 0.0001 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0002 0.0000 0.0002 -0.0001 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 123 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0223 0.0401 -0.0405 -0.1271 0.0476 -0.0806 -0.0101 0.0050 -0.0268 0.0025 0.0226 -0.0108 -0.0141 0.0405 -0.0385 -0.1161 0.0286 -0.0816 -0.0095 0.0014 -0.0289 0.0068 0.0183 -0.0112 -0.0059 0.0406 -0.0359 -0.0088 -0.0019 -0.0308 0.0105 0.0148 -0.0115 0.0012 0.0405 -0.0336 -0.0080 -0.0047 -0.0323 0.0129 0.0126 -0.0117 -0.0245 -0.0245 -0.0550 -0.0228 -0.0228 -0.0533 RADIANS) Y-TRANS -1.1357 -0.5777 -1.2018 -1.1051 -0.5833 -1.2787 -1.0787 -0.5706 -1.2346 -1.0718 -0.5854 -1.2122 -1.0809 -0.6330 -1.2023 -1.0439 -0.6491 -1.2821 -1.0156 -0.6331 -1.2347 -1.0111 -0.6449 -1.2119 -1.0261 -0.6883 -1.2027 -0.9523 -0.6964 -1.2351 -0.9503 -0.7052 -1.2119 -0.9715 -0.7436 -1.2032 -0.8889 -0.7604 -1.2356 -0.8893 -0.7662 -1.2120 -0.8519 -0.8519 -1.2901 -0.8471 -0.8471 -1.2823 124 STRUCTURE TYPE = SPACE Z-TRANS -0.3297 0.3258 -0.0029 -0.3757 0.3849 0.0055 -0.3816 0.3740 -0.0044 -0.3662 0.3566 -0.0054 -0.3299 0.3257 -0.0030 -0.3755 0.3850 0.0057 -0.3809 0.3755 -0.0030 -0.3654 0.3584 -0.0039 -0.3300 0.3257 -0.0030 -0.3802 0.3771 -0.0018 -0.3645 0.3602 -0.0025 -0.3299 0.3257 -0.0030 -0.3797 0.3784 -0.0007 -0.3638 0.3619 -0.0011 -0.3258 0.3258 0.0000 -0.3209 0.3209 0.0000 X-ROTAN -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0007 0.0007 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0001 0.0000 Z-ROTAN 0.0002 0.0000 0.0002 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 -0.0001 0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0000 0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 Page 124 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0208 -0.0208 -0.0509 -0.0185 -0.0185 -0.0481 -0.0166 -0.0166 -0.0455 -0.0147 -0.0147 -0.0428 -0.0123 -0.0123 -0.0397 -0.0096 -0.0096 -0.0363 -0.0067 -0.0067 -0.0327 -0.0038 -0.0038 -0.0292 -0.0011 -0.0011 -0.0261 0.0014 0.0014 -0.0234 0.0033 0.0033 -0.0212 0.0053 0.0053 -0.0191 0.0077 0.0077 -0.0167 0.0102 0.0102 -0.0142 0.0128 0.0128 -0.0117 0.0154 0.0154 -0.0093 RADIANS) Y-TRANS -0.8430 -0.8430 -1.2748 -0.8396 -0.8396 -1.2678 -0.8385 -0.8385 -1.2632 -0.8331 -0.8331 -1.2543 -0.8299 -0.8299 -1.2478 -0.8273 -0.8273 -1.2418 -0.8252 -0.8252 -1.2363 -0.8246 -0.8246 -1.2327 -0.8244 -0.8244 -1.2294 -0.8248 -0.8248 -1.2266 -0.8274 -0.8274 -1.2260 -0.8256 -0.8256 -1.2208 -0.8259 -0.8259 -1.2176 -0.8268 -0.8268 -1.2148 -0.8281 -0.8281 -1.2123 -0.8306 -0.8306 -1.2108 125 STRUCTURE TYPE = SPACE Z-TRANS -0.3206 0.3206 0.0000 -0.3326 0.3326 0.0000 -0.3543 0.3543 0.0000 -0.3502 0.3502 0.0000 -0.3592 0.3592 0.0000 -0.3746 0.3746 0.0000 -0.3796 0.3796 0.0000 -0.3776 0.3776 0.0000 -0.3653 0.3653 0.0000 -0.3601 0.3601 0.0000 -0.3687 0.3687 0.0000 -0.3577 0.3577 0.0000 -0.3571 0.3571 0.0000 -0.3640 0.3640 0.0000 -0.3634 0.3634 0.0000 -0.3576 0.3576 0.0000 X-ROTAN -0.0009 0.0009 0.0000 -0.0011 0.0011 0.0000 -0.0013 0.0013 0.0000 -0.0011 0.0011 0.0000 -0.0009 0.0009 0.0000 -0.0008 0.0008 0.0000 -0.0007 0.0007 0.0000 -0.0008 0.0008 0.0000 -0.0009 0.0009 0.0000 -0.0011 0.0011 0.0000 -0.0013 0.0013 0.0000 -0.0011 0.0011 0.0000 -0.0009 0.0009 0.0000 -0.0008 0.0008 0.0000 -0.0006 0.0006 0.0000 -0.0008 0.0008 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0002 0.0000 0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0001 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 -0.0001 0.0000 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0002 0.0000 Z-ROTAN 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 125 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0177 0.0177 -0.0071 0.0197 0.0197 -0.0052 0.0211 0.0211 -0.0040 0.0220 0.0220 -0.0032 0.0226 0.0226 -0.0029 0.0226 0.0226 -0.0030 0.0226 0.0226 -0.0030 -0.0047 -0.0080 -0.0323 0.0126 0.0129 -0.0117 -0.0019 -0.0088 -0.0308 0.0148 0.0105 -0.0115 0.0405 0.0012 -0.0336 0.0286 -0.1161 -0.0816 0.0014 -0.0095 -0.0289 0.0183 0.0068 -0.0112 0.0406 -0.0059 -0.0359 RADIANS) Y-TRANS -0.8336 -0.8336 -1.2095 -0.8371 -0.8371 -1.2086 -0.8428 -0.8428 -1.2096 -0.8439 -0.8439 -1.2059 -0.8465 -0.8465 -1.2035 -0.8486 -0.8486 -1.2002 -0.8502 -0.8502 -1.1964 -0.7604 -0.8889 -1.2356 -0.7662 -0.8893 -1.2120 -0.6964 -0.9523 -1.2351 -0.7052 -0.9503 -1.2119 -0.7436 -0.9715 -1.2032 -0.6491 -1.0439 -1.2821 -0.6331 -1.0156 -1.2347 -0.6449 -1.0111 -1.2119 -0.6883 -1.0261 -1.2027 126 STRUCTURE TYPE = SPACE Z-TRANS -0.3403 0.3403 0.0000 -0.3293 0.3293 0.0000 -0.3337 0.3337 0.0000 -0.3103 0.3103 0.0000 -0.2978 0.2978 0.0000 -0.3060 0.3060 0.0000 -0.3295 0.3295 0.0000 -0.3784 0.3797 0.0007 -0.3619 0.3638 0.0011 -0.3771 0.3802 0.0018 -0.3602 0.3645 0.0025 -0.3257 0.3299 0.0030 -0.3850 0.3755 -0.0057 -0.3755 0.3809 0.0030 -0.3584 0.3654 0.0039 -0.3257 0.3300 0.0030 X-ROTAN -0.0009 0.0009 0.0000 -0.0011 0.0011 0.0000 -0.0014 0.0014 0.0000 -0.0011 0.0011 0.0000 -0.0009 0.0009 0.0000 -0.0008 0.0008 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0002 0.0002 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0002 0.0000 0.0000 0.0000 0.0000 0.0002 -0.0002 0.0000 0.0003 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 -0.0001 -0.0001 -0.0001 0.0000 -0.0001 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 0.0002 -0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 Page 126 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0476 -0.1271 -0.0806 0.0050 -0.0101 -0.0268 0.0226 0.0025 -0.0108 0.0405 -0.0141 -0.0385 0.0512 -0.1167 -0.0734 0.0086 -0.0108 -0.0247 0.0268 -0.0018 -0.0106 0.0401 -0.0223 -0.0405 0.0437 -0.0836 -0.0540 0.0122 -0.0116 -0.0228 0.0303 -0.0053 -0.0105 0.0393 -0.0271 -0.0391 0.0296 -0.0428 -0.0317 0.0155 -0.0126 -0.0212 0.0321 -0.0074 -0.0107 0.0384 -0.0224 -0.0294 RADIANS) Y-TRANS -0.5833 -1.1051 -1.2787 -0.5706 -1.0787 -1.2346 -0.5854 -1.0718 -1.2122 -0.6330 -1.0809 -1.2023 -0.5177 -1.1665 -1.2756 -0.5086 -1.1418 -1.2348 -0.5266 -1.1325 -1.2128 -0.5777 -1.1357 -1.2018 -0.4520 -1.2280 -1.2724 -0.4473 -1.2048 -1.2350 -0.4685 -1.1930 -1.2134 -0.5222 -1.1904 -1.2012 -0.3862 -1.2891 -1.2689 -0.3863 -1.2673 -1.2351 -0.4108 -1.2532 -1.2138 -0.4665 -1.2446 -1.2003 127 STRUCTURE TYPE = SPACE Z-TRANS -0.3849 0.3757 -0.0055 -0.3740 0.3816 0.0044 -0.3566 0.3662 0.0054 -0.3257 0.3299 0.0030 -0.3850 0.3759 -0.0055 -0.3726 0.3822 0.0056 -0.3550 0.3670 0.0067 -0.3258 0.3297 0.0029 -0.3851 0.3758 -0.0056 -0.3715 0.3827 0.0065 -0.3537 0.3674 0.0076 -0.3260 0.3294 0.0026 -0.3851 0.3755 -0.0060 -0.3708 0.3826 0.0067 -0.3529 0.3674 0.0077 -0.3263 0.3289 0.0022 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 -0.0007 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0002 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0004 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 0.0004 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 Z-ROTAN 0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0003 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0002 0.0000 -0.0001 -0.0001 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0002 0.0002 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0001 0.0001 Page 127 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0135 -0.0184 -0.0253 0.0135 -0.0188 -0.0256 0.0136 -0.0186 -0.0255 0.0139 -0.0181 -0.0251 0.0142 -0.0176 -0.0245 0.0147 -0.0169 -0.0237 0.0155 -0.0160 -0.0227 0.0167 -0.0150 -0.0216 0.0183 -0.0138 -0.0201 0.0200 -0.0127 -0.0185 0.0215 -0.0117 -0.0174 0.0228 -0.0108 -0.0163 0.0241 -0.0101 -0.0154 0.0254 -0.0094 -0.0145 0.0269 -0.0085 -0.0135 0.0286 -0.0076 -0.0124 RADIANS) Y-TRANS -0.3204 -1.3493 -1.2644 -0.3211 -1.3477 -1.2615 -0.3217 -1.3453 -1.2580 -0.3223 -1.3428 -1.2542 -0.3235 -1.3407 -1.2509 -0.3233 -1.3373 -1.2463 -0.3238 -1.3345 -1.2422 -0.3246 -1.3318 -1.2383 -0.3257 -1.3291 -1.2344 -0.3281 -1.3272 -1.2319 -0.3310 -1.3253 -1.2293 -0.3342 -1.3235 -1.2269 -0.3382 -1.3221 -1.2250 -0.3410 -1.3194 -1.2216 -0.3448 -1.3171 -1.2189 -0.3489 -1.3149 -1.2162 128 STRUCTURE TYPE = SPACE Z-TRANS -0.3851 0.3747 -0.0067 -0.3709 0.3674 0.0001 -0.3602 0.3782 0.0194 -0.3541 0.3831 0.0283 -0.3539 0.3708 0.0161 -0.3571 0.3868 0.0275 -0.3624 0.3873 0.0217 -0.3678 0.3796 0.0077 -0.3705 0.3816 0.0058 -0.3724 0.3834 0.0072 -0.3707 0.3950 0.0212 -0.3682 0.3980 0.0274 -0.3676 0.3844 0.0155 -0.3651 0.3951 0.0273 -0.3617 0.3872 0.0216 -0.3576 0.3710 0.0082 X-ROTAN -0.0007 0.0006 -0.0001 -0.0007 0.0004 -0.0003 -0.0007 0.0001 -0.0005 -0.0007 -0.0001 -0.0007 -0.0007 -0.0004 -0.0010 -0.0007 -0.0001 -0.0007 -0.0007 0.0002 -0.0005 -0.0006 0.0004 -0.0002 -0.0006 0.0006 0.0000 -0.0006 0.0004 -0.0002 -0.0007 0.0002 -0.0004 -0.0007 0.0000 -0.0007 -0.0007 -0.0004 -0.0010 -0.0007 0.0000 -0.0007 -0.0007 0.0002 -0.0004 -0.0006 0.0004 -0.0002 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0002 0.0002 0.0000 -0.0001 -0.0001 -0.0002 -0.0001 -0.0002 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0001 0.0002 0.0000 0.0001 0.0002 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 0.0000 -0.0001 -0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0002 0.0000 0.0002 0.0001 Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Page 128 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0307 -0.0065 -0.0109 0.0328 -0.0054 -0.0095 0.0343 -0.0045 -0.0086 0.0356 -0.0038 -0.0078 0.0364 -0.0033 -0.0073 0.0371 -0.0030 -0.0069 0.0376 -0.0027 -0.0067 0.0379 -0.0027 -0.0068 0.0379 -0.0031 -0.0072 -0.1304 0.0835 -0.0561 -0.0933 0.0493 -0.0537 -0.0566 0.0145 -0.0519 -0.0206 -0.0206 -0.0510 0.0145 -0.0566 -0.0519 0.0493 -0.0933 -0.0537 0.0835 -0.1304 -0.0561 RADIANS) Y-TRANS -0.3536 -1.3126 -1.2135 -0.3598 -1.3112 -1.2121 -0.3666 -1.3098 -1.2106 -0.3737 -1.3084 -1.2092 -0.3816 -1.3075 -1.2083 -0.3883 -1.3051 -1.2059 -0.3957 -1.3032 -1.2039 -0.4032 -1.3010 -1.2016 -0.4106 -1.2982 -1.1987 -1.0187 -0.7212 -1.3101 -0.9761 -0.7772 -1.3202 -0.9285 -0.8290 -1.3235 -0.8794 -0.8794 -1.3245 -0.8290 -0.9285 -1.3235 -0.7772 -0.9761 -1.3202 -0.7212 -1.0187 -1.3101 129 STRUCTURE TYPE = SPACE Z-TRANS -0.3526 0.3664 0.0068 -0.3489 0.3629 0.0085 -0.3421 0.3690 0.0226 -0.3355 0.3675 0.0290 -0.3331 0.3519 0.0178 -0.3317 0.3694 0.0370 -0.3304 0.3662 0.0368 -0.3290 0.3474 0.0203 -0.3265 0.3282 0.0015 -0.0505 0.0468 -0.0027 -0.0491 0.0473 -0.0012 -0.0486 0.0479 -0.0004 -0.0483 0.0483 0.0000 -0.0479 0.0486 0.0004 -0.0473 0.0491 0.0012 -0.0468 0.0505 0.0027 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0004 -0.0002 -0.0006 0.0001 -0.0005 -0.0006 -0.0001 -0.0007 -0.0007 -0.0005 -0.0011 -0.0007 -0.0001 -0.0007 -0.0006 0.0001 -0.0004 -0.0006 0.0003 -0.0002 -0.0006 0.0005 0.0000 -0.0004 0.0005 0.0001 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0004 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0002 -0.0001 -0.0001 -0.0002 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0002 0.0002 0.0000 0.0003 0.0002 0.0000 0.0002 0.0002 0.0003 -0.0003 0.0000 0.0004 -0.0003 0.0000 0.0004 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0004 0.0000 0.0003 -0.0004 0.0000 0.0003 -0.0003 0.0000 Z-ROTAN -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 0.0001 0.0000 0.0000 0.0002 0.0001 0.0001 0.0001 0.0002 0.0001 0.0001 0.0002 0.0001 0.0001 0.0002 0.0002 0.0000 0.0001 0.0001 -0.0001 0.0000 Page 129 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.1301 0.0846 -0.0552 -0.0931 0.0494 -0.0532 -0.0560 0.0150 -0.0508 -0.0199 -0.0199 -0.0497 0.0150 -0.0560 -0.0508 0.0494 -0.0931 -0.0532 0.0846 -0.1301 -0.0552 -0.1296 0.0848 -0.0546 -0.0927 0.0496 -0.0527 -0.0553 0.0155 -0.0496 -0.0180 -0.0180 -0.0464 0.0155 -0.0553 -0.0496 0.0496 -0.0927 -0.0527 0.0848 -0.1296 -0.0546 -0.1295 0.0840 -0.0552 -0.0930 0.0492 -0.0533 RADIANS) Y-TRANS -1.0298 -0.7061 -1.3090 -0.9831 -0.7676 -1.3220 -0.9304 -0.8226 -1.3240 -0.8761 -0.8761 -1.3233 -0.8226 -0.9304 -1.3240 -0.7676 -0.9831 -1.3220 -0.7061 -1.0298 -1.3090 -1.0361 -0.6872 -1.3015 -0.9807 -0.7472 -1.3061 -0.9233 -0.8059 -1.3079 -0.8633 -0.8633 -1.3061 -0.8059 -0.9233 -1.3079 -0.7472 -0.9807 -1.3061 -0.6872 -1.0361 -1.3015 -1.0402 -0.6673 -1.2912 -0.9863 -0.7251 -1.2965 130 STRUCTURE TYPE = SPACE Z-TRANS -0.0846 0.0831 -0.0012 -0.0844 0.0834 -0.0008 -0.0841 0.0838 -0.0002 -0.0839 0.0839 0.0000 -0.0838 0.0841 0.0002 -0.0834 0.0844 0.0008 -0.0831 0.0846 0.0012 -0.1203 0.1192 -0.0012 -0.1199 0.1193 -0.0007 -0.1192 0.1197 0.0003 -0.1194 0.1194 0.0000 -0.1197 0.1192 -0.0003 -0.1193 0.1199 0.0007 -0.1192 0.1203 0.0012 -0.1555 0.1553 -0.0005 -0.1550 0.1557 0.0004 X-ROTAN -0.0005 0.0006 0.0001 -0.0005 0.0006 0.0001 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0005 -0.0001 -0.0006 0.0005 -0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0004 -0.0004 0.0000 0.0004 -0.0003 0.0000 0.0004 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0004 0.0000 0.0003 -0.0004 0.0000 0.0004 -0.0004 0.0000 0.0004 -0.0004 0.0000 0.0004 -0.0003 0.0000 0.0004 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0004 0.0000 0.0003 -0.0004 0.0000 0.0004 -0.0004 0.0000 0.0004 -0.0003 0.0000 0.0004 -0.0003 0.0001 Z-ROTAN 0.0000 0.0002 0.0001 0.0000 0.0001 0.0000 0.0000 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0002 0.0000 0.0001 0.0000 0.0002 0.0001 0.0000 0.0002 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0001 0.0001 0.0000 0.0001 0.0002 0.0000 0.0001 0.0002 0.0000 0.0001 0.0000 0.0002 0.0001 0.0000 0.0003 0.0002 Page 130 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0543 0.0157 -0.0484 -0.0164 -0.0164 -0.0433 0.0157 -0.0543 -0.0484 0.0492 -0.0930 -0.0533 0.0840 -0.1295 -0.0552 -0.1245 0.0661 -0.0633 -0.0981 0.0245 -0.0787 -0.0731 -0.0132 -0.0917 -0.0453 -0.0453 -0.0961 -0.0132 -0.0731 -0.0917 0.0245 -0.0981 -0.0787 0.0661 -0.1245 -0.0633 -0.1243 0.0661 -0.0631 0.0661 -0.1243 -0.0631 -0.1251 0.0656 -0.0640 -0.0874 0.0364 -0.0561 RADIANS) Y-TRANS -0.9253 -0.7910 -1.3010 -0.8574 -0.8574 -1.2985 -0.7910 -0.9253 -1.3010 -0.7251 -0.9863 -1.2965 -0.6673 -1.0402 -1.2912 -1.0224 -0.7240 -1.3150 -0.9756 -0.7766 -1.3193 -0.9280 -0.8286 -1.3226 -0.8790 -0.8790 -1.3236 -0.8286 -0.9280 -1.3226 -0.7766 -0.9756 -1.3193 -0.7240 -1.0224 -1.3150 -1.0292 -0.7058 -1.3082 -0.7058 -1.0292 -1.3082 -1.0359 -0.6872 -1.3012 -0.9802 -0.7469 -1.3054 131 STRUCTURE TYPE = SPACE Z-TRANS -0.1544 0.1550 0.0005 -0.1542 0.1542 0.0000 -0.1550 0.1544 -0.0005 -0.1557 0.1550 -0.0004 -0.1553 0.1555 0.0005 -0.0974 0.0986 0.0009 -0.0973 0.0987 0.0011 -0.0978 0.0983 0.0004 -0.0980 0.0980 0.0000 -0.0983 0.0978 -0.0004 -0.0987 0.0973 -0.0011 -0.0986 0.0974 -0.0009 -0.1371 0.1370 -0.0003 -0.1370 0.1371 0.0003 -0.1776 0.1782 0.0007 -0.1775 0.1782 0.0007 X-ROTAN -0.0007 0.0007 0.0000 -0.0007 0.0007 0.0000 -0.0007 0.0007 0.0000 -0.0006 0.0006 -0.0001 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0003 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0004 -0.0001 0.0003 -0.0004 0.0000 0.0003 -0.0004 -0.0001 0.0002 -0.0004 -0.0002 0.0003 -0.0003 -0.0001 0.0003 -0.0003 0.0000 0.0003 -0.0003 0.0001 0.0004 -0.0002 0.0002 0.0004 -0.0003 0.0001 0.0004 -0.0004 0.0000 0.0004 -0.0004 0.0000 0.0004 -0.0004 0.0000 0.0004 -0.0003 0.0001 Z-ROTAN 0.0001 0.0002 0.0001 0.0001 0.0001 0.0001 0.0002 0.0001 0.0001 0.0003 0.0000 0.0002 0.0002 0.0000 0.0001 0.0000 0.0002 0.0001 0.0001 0.0003 0.0003 0.0002 0.0003 0.0005 0.0003 0.0003 0.0006 0.0003 0.0002 0.0005 0.0003 0.0001 0.0003 0.0002 0.0000 0.0001 -0.0001 0.0002 0.0001 0.0002 -0.0001 0.0001 -0.0001 0.0002 0.0001 -0.0001 0.0001 0.0000 Page 131 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0525 0.0107 -0.0485 -0.0184 -0.0184 -0.0454 0.0107 -0.0525 -0.0485 0.0364 -0.0874 -0.0561 0.0656 -0.1251 -0.0640 -0.1258 0.0649 -0.0652 -0.0182 -0.0182 -0.0450 0.0649 -0.1258 -0.0652 -0.1198 0.0470 -0.0723 -0.1009 0.0005 -0.1004 -0.0882 -0.0398 -0.1285 -0.0693 -0.0693 -0.1392 -0.0398 -0.0882 -0.1285 0.0005 -0.1009 -0.1004 0.0470 -0.1198 -0.0723 -0.1198 0.0470 -0.0723 RADIANS) Y-TRANS -0.9225 -0.8055 -1.3069 -0.8629 -0.8629 -1.3055 -0.8055 -0.9225 -1.3069 -0.7469 -0.9802 -1.3054 -0.6872 -1.0359 -1.3012 -1.0397 -0.6667 -1.2904 -0.8572 -0.8572 -1.2982 -0.6667 -1.0397 -1.2904 -1.0236 -0.7248 -1.3164 -0.9756 -0.7766 -1.3192 -0.9276 -0.8282 -1.3219 -0.8786 -0.8786 -1.3230 -0.8282 -0.9276 -1.3219 -0.7766 -0.9756 -1.3192 -0.7248 -1.0236 -1.3164 -1.0293 -0.7057 -1.3082 132 STRUCTURE TYPE = SPACE Z-TRANS -0.1776 0.1781 0.0004 -0.1779 0.1779 0.0000 -0.1781 0.1776 -0.0004 -0.1782 0.1775 -0.0007 -0.1782 0.1776 -0.0007 -0.2191 0.2218 0.0024 -0.2100 0.2100 0.0000 -0.2218 0.2191 -0.0024 -0.1465 0.1493 0.0020 -0.1466 0.1491 0.0019 -0.1471 0.1486 0.0012 -0.1478 0.1478 0.0000 -0.1486 0.1471 -0.0012 -0.1491 0.1466 -0.0019 -0.1493 0.1465 -0.0020 -0.1870 0.1940 0.0066 X-ROTAN -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0006 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0003 -0.0003 0.0001 0.0003 -0.0003 0.0000 0.0003 -0.0003 -0.0001 0.0003 -0.0004 -0.0001 0.0004 -0.0004 0.0000 0.0004 -0.0005 -0.0001 0.0003 -0.0003 0.0000 0.0005 -0.0004 0.0001 0.0003 -0.0005 -0.0002 0.0001 -0.0005 -0.0003 0.0001 -0.0004 -0.0002 0.0002 -0.0002 0.0000 0.0004 -0.0001 0.0002 0.0005 -0.0001 0.0003 0.0005 -0.0003 0.0002 0.0005 -0.0005 0.0000 Z-ROTAN -0.0001 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 -0.0001 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0001 0.0001 -0.0001 0.0001 0.0000 0.0001 0.0001 0.0001 0.0001 -0.0001 0.0000 0.0000 0.0002 0.0001 0.0000 0.0002 0.0002 0.0001 0.0002 0.0003 0.0002 0.0002 0.0003 0.0002 0.0001 0.0003 0.0002 0.0000 0.0002 0.0002 0.0000 0.0001 -0.0001 0.0002 0.0001 Page 132 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0470 -0.1198 -0.0723 -0.1202 0.0468 -0.0728 -0.0797 0.0187 -0.0621 -0.0499 0.0041 -0.0508 -0.0215 -0.0215 -0.0497 0.0041 -0.0499 -0.0508 0.0187 -0.0797 -0.0621 0.0468 -0.1202 -0.0728 -0.1208 0.0467 -0.0733 -0.0211 -0.0211 -0.0492 0.0467 -0.1208 -0.0733 -0.1146 0.0278 -0.0810 -0.1011 -0.0205 -0.1165 -0.0982 -0.0612 -0.1548 -0.0872 -0.0872 -0.1699 -0.0612 -0.0982 -0.1548 RADIANS) Y-TRANS -0.7057 -1.0293 -1.3082 -1.0353 -0.6868 -1.3003 -0.9799 -0.7469 -1.3051 -0.9221 -0.8052 -1.3063 -0.8630 -0.8630 -1.3057 -0.8052 -0.9221 -1.3063 -0.7469 -0.9799 -1.3051 -0.6868 -1.0353 -1.3003 -1.0396 -0.6674 -1.2908 -0.8573 -0.8573 -1.2981 -0.6674 -1.0396 -1.2908 -1.0238 -0.7249 -1.3166 -0.9756 -0.7766 -1.3192 -0.9274 -0.8279 -1.3216 -0.8783 -0.8783 -1.3225 -0.8279 -0.9274 -1.3216 133 STRUCTURE TYPE = SPACE Z-TRANS -0.1940 0.1870 -0.0066 -0.2341 0.2377 0.0038 -0.2344 0.2374 0.0032 -0.2359 0.2364 0.0006 -0.2362 0.2362 0.0000 -0.2364 0.2359 -0.0006 -0.2374 0.2344 -0.0032 -0.2377 0.2341 -0.0038 -0.2799 0.2841 0.0041 -0.2613 0.2613 0.0000 -0.2841 0.2799 -0.0041 -0.1951 0.2005 0.0040 -0.1952 0.2002 0.0037 -0.1961 0.1992 0.0023 -0.1976 0.1976 0.0000 -0.1992 0.1961 -0.0023 X-ROTAN -0.0006 0.0005 -0.0001 -0.0005 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0001 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0006 0.0006 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0005 -0.0005 0.0000 0.0005 -0.0004 0.0000 0.0004 -0.0002 0.0001 0.0003 -0.0002 0.0000 0.0003 -0.0003 0.0000 0.0002 -0.0003 0.0000 0.0002 -0.0004 -0.0001 0.0004 -0.0005 0.0000 0.0004 -0.0005 0.0000 0.0002 -0.0002 0.0000 0.0005 -0.0004 0.0000 0.0003 -0.0005 -0.0002 0.0001 -0.0005 -0.0004 0.0001 -0.0003 -0.0003 0.0002 -0.0002 0.0000 0.0003 -0.0001 0.0003 Z-ROTAN 0.0002 -0.0001 0.0001 -0.0001 0.0002 0.0001 -0.0001 0.0002 0.0001 0.0000 0.0001 0.0000 0.0001 0.0001 0.0001 0.0001 0.0000 0.0000 0.0002 -0.0001 0.0001 0.0002 -0.0001 0.0001 -0.0001 0.0002 0.0001 0.0001 0.0001 0.0001 0.0002 -0.0001 0.0001 -0.0001 0.0002 0.0001 0.0000 0.0002 0.0002 0.0001 0.0002 0.0003 0.0002 0.0002 0.0003 0.0002 0.0001 0.0003 Page 133 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS -0.0205 -0.1011 -0.1165 0.0278 -0.1146 -0.0810 -0.1152 0.0279 -0.0815 -0.0685 -0.0097 -0.0737 -0.0523 -0.0004 -0.0563 -0.0263 -0.0263 -0.0563 -0.0004 -0.0523 -0.0563 -0.0097 -0.0685 -0.0737 0.0279 -0.1152 -0.0815 -0.1145 0.0279 -0.0809 -0.1160 0.0281 -0.0820 -0.0259 -0.0259 -0.0561 0.0279 -0.1145 -0.0809 0.0281 -0.1160 -0.0820 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 RADIANS) Y-TRANS -0.7766 -0.9756 -1.3192 -0.7249 -1.0238 -1.3166 -1.0349 -0.6867 -1.2999 -0.9801 -0.7471 -1.3053 -0.9220 -0.8051 -1.3062 -0.8631 -0.8631 -1.3057 -0.8051 -0.9220 -1.3062 -0.7471 -0.9801 -1.3053 -0.6867 -1.0349 -1.2999 -1.0294 -0.7057 -1.3083 -1.0395 -0.6677 -1.2909 -0.8574 -0.8574 -1.2982 -0.7057 -1.0294 -1.3083 -0.6677 -1.0395 -1.2909 -0.9836 -0.6965 -1.2649 -0.6965 -0.9836 -1.2649 134 STRUCTURE TYPE = SPACE Z-TRANS -0.2002 0.1952 -0.0037 -0.2005 0.1951 -0.0040 -0.2894 0.2978 0.0086 -0.2893 0.2979 0.0087 -0.2949 0.2944 -0.0003 -0.2946 0.2946 0.0000 -0.2944 0.2949 0.0003 -0.2979 0.2893 -0.0087 -0.2978 0.2894 -0.0086 -0.2365 0.2508 0.0136 -0.3403 0.3465 0.0063 -0.3174 0.3174 0.0000 -0.2508 0.2365 -0.0136 -0.3465 0.3403 -0.0063 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 X-ROTAN -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0001 -0.0005 0.0006 0.0001 -0.0006 0.0006 0.0000 -0.0006 0.0006 0.0000 -0.0006 0.0005 -0.0001 -0.0006 0.0006 0.0000 -0.0001 0.0000 -0.0001 0.0000 0.0001 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0005 -0.0001 0.0004 0.0005 -0.0003 0.0002 0.0005 -0.0004 0.0001 0.0004 -0.0003 0.0001 0.0003 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0003 0.0000 0.0003 -0.0004 -0.0001 0.0004 -0.0005 -0.0001 0.0005 -0.0005 0.0000 0.0005 -0.0005 0.0000 0.0002 -0.0002 0.0000 0.0005 -0.0005 0.0000 0.0005 -0.0005 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN 0.0002 0.0000 0.0002 0.0002 -0.0001 0.0001 -0.0001 0.0002 0.0001 -0.0001 0.0002 0.0001 0.0000 0.0000 0.0001 0.0001 0.0001 0.0001 0.0000 0.0000 0.0001 0.0002 -0.0001 0.0001 0.0002 -0.0001 0.0001 -0.0001 0.0002 0.0001 0.0000 0.0002 0.0001 0.0001 0.0001 0.0001 0.0002 -0.0001 0.0001 0.0002 0.0000 0.0001 0.0007 -0.0005 0.0003 -0.0005 0.0007 0.0003 Page 134 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0063 0.0168 0.0024 0.0196 0.0232 0.0154 0.0330 0.0288 0.0284 0.0433 0.0333 0.0383 0.0491 0.0361 0.0437 0.0499 0.0371 0.0441 0.0461 0.0363 0.0400 0.0381 0.0339 0.0320 0.0328 0.0328 0.0273 0.0339 0.0381 0.0320 0.0363 0.0461 0.0400 0.0371 0.0499 0.0441 0.0361 0.0491 0.0437 0.0333 0.0433 0.0383 0.0288 0.0330 0.0284 0.0232 0.0196 0.0154 RADIANS) Y-TRANS -1.2262 -0.5214 -1.1555 -1.1889 -0.5671 -1.1615 -1.1541 -0.6147 -1.1705 -1.1154 -0.6634 -1.1766 -1.0759 -0.7121 -1.1822 -1.0354 -0.7610 -1.1871 -0.9943 -0.8099 -1.1917 -0.9499 -0.8574 -1.1935 -0.9043 -0.9043 -1.1944 -0.8574 -0.9499 -1.1935 -0.8099 -0.9943 -1.1917 -0.7610 -1.0354 -1.1871 -0.7121 -1.0759 -1.1822 -0.6634 -1.1154 -1.1766 -0.6147 -1.1541 -1.1705 -0.5671 -1.1889 -1.1615 135 STRUCTURE TYPE = SPACE Z-TRANS -0.1763 0.1535 -0.0152 -0.1755 0.1538 -0.0144 -0.1746 0.1545 -0.0134 -0.1724 0.1556 -0.0111 -0.1699 0.1569 -0.0085 -0.1674 0.1582 -0.0059 -0.1651 0.1597 -0.0034 -0.1625 0.1616 -0.0006 -0.1618 0.1618 0.0000 -0.1616 0.1625 0.0006 -0.1597 0.1651 0.0034 -0.1582 0.1674 0.0059 -0.1569 0.1699 0.0085 -0.1556 0.1724 0.0111 -0.1545 0.1746 0.0134 -0.1538 0.1755 0.0144 X-ROTAN -0.0004 0.0004 0.0000 -0.0003 0.0005 0.0001 -0.0004 0.0005 0.0001 -0.0004 0.0005 0.0001 -0.0004 0.0005 0.0001 -0.0004 0.0005 0.0000 -0.0004 0.0005 0.0001 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0005 0.0000 -0.0005 0.0004 -0.0001 -0.0005 0.0004 0.0000 -0.0005 0.0004 -0.0001 -0.0005 0.0004 -0.0001 -0.0005 0.0004 -0.0001 -0.0005 0.0003 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0001 -0.0001 -0.0001 -0.0001 -0.0001 -0.0001 Z-ROTAN 0.0012 -0.0017 0.0008 0.0009 -0.0016 0.0006 0.0005 -0.0015 0.0004 0.0002 -0.0014 0.0003 0.0000 -0.0013 0.0002 -0.0002 -0.0012 0.0001 -0.0004 -0.0010 0.0001 -0.0005 -0.0008 0.0002 -0.0007 -0.0007 0.0002 -0.0008 -0.0005 0.0002 -0.0010 -0.0004 0.0001 -0.0012 -0.0002 0.0001 -0.0013 0.0000 0.0002 -0.0014 0.0002 0.0003 -0.0015 0.0005 0.0004 -0.0016 0.0009 0.0006 Page 135 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0168 0.0063 0.0024 0.0048 0.0169 0.0012 0.0203 0.0232 0.0159 0.0328 0.0290 0.0282 0.0427 0.0334 0.0377 0.0484 0.0361 0.0430 0.0493 0.0370 0.0434 0.0453 0.0361 0.0392 0.0387 0.0343 0.0328 0.0350 0.0350 0.0298 0.0343 0.0387 0.0328 0.0361 0.0453 0.0392 0.0370 0.0493 0.0434 0.0361 0.0484 0.0430 0.0334 0.0427 0.0377 0.0290 0.0328 0.0282 RADIANS) Y-TRANS -0.5214 -1.2262 -1.1555 -1.1153 -0.6940 -1.0821 -1.1186 -0.7428 -1.1140 -1.1128 -0.7858 -1.1371 -1.1032 -0.8266 -1.1562 -1.0892 -0.8648 -1.1710 -1.0703 -0.9000 -1.1808 -1.0468 -0.9323 -1.1858 -1.0193 -0.9618 -1.1868 -0.9860 -0.9860 -1.1815 -0.9618 -1.0193 -1.1868 -0.9323 -1.0468 -1.1858 -0.9000 -1.0703 -1.1808 -0.8648 -1.0892 -1.1710 -0.8266 -1.1032 -1.1562 -0.7858 -1.1128 -1.1371 136 STRUCTURE TYPE = SPACE Z-TRANS -0.1535 0.1763 0.0152 -0.1910 0.1455 -0.0297 -0.1883 0.1471 -0.0269 -0.1850 0.1488 -0.0235 -0.1800 0.1512 -0.0185 -0.1740 0.1540 -0.0126 -0.1680 0.1569 -0.0066 -0.1628 0.1596 -0.0015 -0.1600 0.1610 0.0010 -0.1603 0.1603 0.0000 -0.1610 0.1600 -0.0010 -0.1596 0.1628 0.0015 -0.1569 0.1680 0.0066 -0.1541 0.1740 0.0126 -0.1512 0.1800 0.0185 -0.1488 0.1850 0.0235 X-ROTAN -0.0004 0.0004 0.0000 0.0000 0.0005 0.0003 -0.0001 0.0004 0.0002 -0.0001 0.0004 0.0002 -0.0002 0.0004 0.0002 -0.0002 0.0004 0.0001 -0.0002 0.0004 0.0001 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0004 0.0002 -0.0001 -0.0004 0.0002 -0.0001 -0.0004 0.0002 -0.0002 -0.0004 0.0001 -0.0002 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0001 -0.0001 -0.0001 0.0002 0.0001 0.0002 0.0001 0.0001 0.0001 0.0002 0.0001 0.0001 0.0001 0.0000 0.0001 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 -0.0001 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0001 0.0001 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0001 -0.0001 -0.0001 -0.0002 -0.0001 Z-ROTAN -0.0017 0.0012 0.0008 0.0003 -0.0016 0.0001 0.0004 -0.0020 0.0002 0.0001 -0.0020 0.0001 -0.0001 -0.0019 0.0000 -0.0004 -0.0018 -0.0001 -0.0006 -0.0017 -0.0001 -0.0008 -0.0015 -0.0002 -0.0009 -0.0013 -0.0001 -0.0010 -0.0010 -0.0002 -0.0013 -0.0009 -0.0001 -0.0015 -0.0008 -0.0002 -0.0017 -0.0006 -0.0001 -0.0018 -0.0004 -0.0001 -0.0019 -0.0001 0.0000 -0.0020 0.0001 0.0001 Page 136 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.0232 0.0203 0.0159 0.0169 0.0048 0.0012 -0.0012 0.2099 0.0073 0.0264 0.2309 0.0278 0.0559 0.2429 0.0474 0.0869 0.2446 0.0653 0.1137 0.2390 0.0772 0.1344 0.2270 0.0820 0.1488 0.2098 0.0803 0.1585 0.1889 0.0751 0.1694 0.1694 0.0716 0.1889 0.1585 0.0751 0.2098 0.1488 0.0803 0.2270 0.1344 0.0820 0.2390 0.1137 0.0772 0.2446 0.0869 0.0653 RADIANS) Y-TRANS -0.7428 -1.1186 -1.1140 -0.6940 -1.1153 -1.0821 -1.1210 -0.6980 -1.0879 -1.1178 -0.7424 -1.1134 -1.1126 -0.7857 -1.1368 -1.1032 -0.8266 -1.1563 -1.0893 -0.8648 -1.1711 -1.0704 -0.9000 -1.1808 -1.0467 -0.9321 -1.1857 -1.0187 -0.9611 -1.1861 -0.9889 -0.9889 -1.1848 -0.9611 -1.0187 -1.1861 -0.9321 -1.0467 -1.1857 -0.9000 -1.0704 -1.1808 -0.8648 -1.0893 -1.1711 -0.8266 -1.1032 -1.1563 137 STRUCTURE TYPE = SPACE Z-TRANS -0.1471 0.1883 0.0269 -0.1455 0.1910 0.0297 -0.1940 0.1894 -0.0040 -0.1937 0.1895 -0.0037 -0.1937 0.1892 -0.0037 -0.1927 0.1894 -0.0027 -0.1913 0.1897 -0.0014 -0.1900 0.1899 -0.0003 -0.1893 0.1898 0.0003 -0.1894 0.1891 -0.0001 -0.1891 0.1891 0.0000 -0.1891 0.1894 0.0001 -0.1898 0.1893 -0.0003 -0.1899 0.1900 0.0003 -0.1897 0.1913 0.0014 -0.1894 0.1927 0.0027 X-ROTAN -0.0004 0.0001 -0.0002 -0.0005 0.0000 -0.0003 -0.0001 0.0004 0.0002 -0.0001 0.0004 0.0002 -0.0001 0.0004 0.0002 -0.0002 0.0004 0.0001 -0.0002 0.0004 0.0001 -0.0002 0.0004 0.0001 -0.0003 0.0003 0.0001 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 -0.0001 -0.0004 0.0002 -0.0001 -0.0004 0.0002 -0.0001 -0.0004 0.0002 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0001 -0.0001 -0.0001 -0.0001 -0.0002 -0.0002 0.0003 0.0002 0.0002 0.0003 0.0002 0.0002 0.0003 0.0001 0.0002 0.0003 0.0000 0.0001 0.0002 -0.0001 0.0001 0.0002 -0.0001 0.0000 0.0001 -0.0002 0.0000 0.0001 -0.0002 0.0000 0.0001 -0.0001 0.0000 0.0002 -0.0001 0.0000 0.0002 -0.0001 0.0000 0.0001 -0.0002 0.0000 0.0001 -0.0002 -0.0001 0.0000 -0.0003 -0.0001 Z-ROTAN -0.0020 0.0004 0.0002 -0.0016 0.0003 0.0001 -0.0002 -0.0021 -0.0002 -0.0003 -0.0022 -0.0003 -0.0005 -0.0022 -0.0004 -0.0007 -0.0022 -0.0004 -0.0008 -0.0021 -0.0005 -0.0010 -0.0020 -0.0005 -0.0012 -0.0019 -0.0006 -0.0014 -0.0017 -0.0006 -0.0015 -0.0015 -0.0006 -0.0017 -0.0014 -0.0006 -0.0019 -0.0012 -0.0006 -0.0020 -0.0010 -0.0005 -0.0021 -0.0008 -0.0005 -0.0022 -0.0007 -0.0004 Page 137 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.2429 0.0559 0.0474 0.2309 0.0264 0.0278 0.2099 -0.0012 0.0073 0.0268 0.4285 0.0375 0.0673 0.4500 0.0639 0.1117 0.4632 0.0900 0.1576 0.4636 0.1127 0.2012 0.4515 0.1291 0.2395 0.4286 0.1376 0.2715 0.3972 0.1389 0.2992 0.3611 0.1359 0.3272 0.3272 0.1337 0.3611 0.2992 0.1359 0.3972 0.2715 0.1389 0.4286 0.2395 0.1376 0.4515 0.2012 0.1291 RADIANS) Y-TRANS -0.7857 -1.1126 -1.1368 -0.7424 -1.1178 -1.1134 -0.6980 -1.1210 -1.0879 -1.1233 -0.6995 -1.0902 -1.1178 -0.7425 -1.1134 -1.1119 -0.7853 -1.1362 -1.1027 -0.8262 -1.1557 -1.0888 -0.8644 -1.1705 -1.0698 -0.8995 -1.1802 -1.0461 -0.9316 -1.1850 -1.0189 -0.9613 -1.1863 -0.9899 -0.9899 -1.1861 -0.9613 -1.0189 -1.1863 -0.9316 -1.0461 -1.1850 -0.8995 -1.0698 -1.1802 -0.8644 -1.0888 -1.1705 138 STRUCTURE TYPE = SPACE Z-TRANS -0.1892 0.1937 0.0037 -0.1895 0.1937 0.0037 -0.1894 0.1940 0.0040 -0.2022 0.2303 0.0164 -0.2026 0.2300 0.0160 -0.2040 0.2290 0.0146 -0.2061 0.2274 0.0125 -0.2084 0.2256 0.0100 -0.2110 0.2235 0.0072 -0.2136 0.2212 0.0044 -0.2158 0.2192 0.0020 -0.2175 0.2175 0.0000 -0.2192 0.2158 -0.0020 -0.2212 0.2136 -0.0044 -0.2235 0.2110 -0.0072 -0.2256 0.2084 -0.0100 X-ROTAN -0.0004 0.0001 -0.0002 -0.0004 0.0001 -0.0002 -0.0004 0.0001 -0.0002 -0.0001 0.0004 0.0002 -0.0001 0.0004 0.0002 -0.0001 0.0004 0.0002 -0.0002 0.0004 0.0001 -0.0002 0.0004 0.0001 -0.0002 0.0004 0.0001 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0004 0.0002 -0.0001 -0.0004 0.0002 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN -0.0001 -0.0003 -0.0002 -0.0002 -0.0003 -0.0002 -0.0002 -0.0003 -0.0002 0.0004 0.0002 0.0003 0.0004 0.0002 0.0003 0.0005 0.0001 0.0003 0.0005 -0.0001 0.0002 0.0004 -0.0002 0.0001 0.0004 -0.0003 0.0000 0.0003 -0.0004 0.0000 0.0003 -0.0004 0.0000 0.0003 -0.0003 0.0000 0.0004 -0.0003 0.0000 0.0004 -0.0003 0.0000 0.0003 -0.0004 0.0000 0.0002 -0.0004 -0.0001 Z-ROTAN -0.0022 -0.0005 -0.0004 -0.0022 -0.0003 -0.0003 -0.0021 -0.0002 -0.0002 -0.0004 -0.0022 -0.0003 -0.0005 -0.0022 -0.0004 -0.0006 -0.0022 -0.0004 -0.0007 -0.0022 -0.0005 -0.0009 -0.0021 -0.0005 -0.0011 -0.0020 -0.0006 -0.0012 -0.0019 -0.0006 -0.0014 -0.0017 -0.0006 -0.0016 -0.0016 -0.0006 -0.0017 -0.0014 -0.0006 -0.0019 -0.0012 -0.0006 -0.0020 -0.0011 -0.0006 -0.0021 -0.0009 -0.0005 Page 138 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.4636 0.1576 0.1127 0.4632 0.1117 0.0900 0.4500 0.0673 0.0639 0.4285 0.0268 0.0375 0.0656 0.6502 0.0735 0.1152 0.6707 0.1037 0.1721 0.6827 0.1344 0.2324 0.6802 0.1617 0.2919 0.6617 0.1823 0.3469 0.6287 0.1943 0.3964 0.5844 0.1985 0.4418 0.5341 0.1977 0.4863 0.4863 0.1967 0.5341 0.4418 0.1977 0.5844 0.3964 0.1985 0.6287 0.3469 0.1943 RADIANS) Y-TRANS -0.8262 -1.1027 -1.1557 -0.7853 -1.1119 -1.1362 -0.7425 -1.1178 -1.1134 -0.6995 -1.1233 -1.0902 -1.1237 -0.6998 -1.0906 -1.1178 -0.7425 -1.1134 -1.1112 -0.7849 -1.1355 -1.1017 -0.8256 -1.1548 -1.0878 -0.8637 -1.1695 -1.0689 -0.8988 -1.1792 -1.0454 -0.9310 -1.1842 -1.0185 -0.9610 -1.1860 -0.9900 -0.9900 -1.1862 -0.9610 -1.0185 -1.1860 -0.9310 -1.0454 -1.1842 -0.8988 -1.0689 -1.1792 139 STRUCTURE TYPE = SPACE Z-TRANS -0.2274 0.2061 -0.0125 -0.2290 0.2040 -0.0146 -0.2300 0.2026 -0.0160 -0.2303 0.2022 -0.0164 -0.2096 0.2720 0.0377 -0.2102 0.2716 0.0371 -0.2132 0.2697 0.0341 -0.2186 0.2663 0.0286 -0.2251 0.2619 0.0219 -0.2320 0.2571 0.0148 -0.2381 0.2526 0.0084 -0.2429 0.2490 0.0035 -0.2461 0.2461 0.0000 -0.2490 0.2429 -0.0035 -0.2526 0.2381 -0.0084 -0.2571 0.2320 -0.0148 X-ROTAN -0.0004 0.0002 -0.0001 -0.0004 0.0001 -0.0002 -0.0004 0.0001 -0.0002 -0.0004 0.0001 -0.0002 -0.0001 0.0004 0.0002 0.0000 0.0004 0.0002 -0.0001 0.0004 0.0002 -0.0001 0.0004 0.0002 -0.0002 0.0004 0.0001 -0.0002 0.0004 0.0001 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0003 0.0003 0.0000 -0.0004 0.0002 -0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0001 -0.0005 -0.0002 -0.0001 -0.0005 -0.0003 -0.0002 -0.0004 -0.0003 -0.0002 -0.0004 -0.0003 0.0004 0.0002 0.0003 0.0005 0.0002 0.0003 0.0006 0.0001 0.0003 0.0006 -0.0001 0.0002 0.0005 -0.0002 0.0002 0.0005 -0.0004 0.0001 0.0004 -0.0005 0.0000 0.0004 -0.0005 0.0000 0.0004 -0.0004 0.0000 0.0005 -0.0004 0.0000 0.0005 -0.0004 0.0000 0.0004 -0.0005 -0.0001 Z-ROTAN -0.0022 -0.0007 -0.0005 -0.0022 -0.0006 -0.0004 -0.0022 -0.0005 -0.0004 -0.0022 -0.0004 -0.0003 -0.0004 -0.0022 -0.0004 -0.0005 -0.0022 -0.0004 -0.0006 -0.0022 -0.0004 -0.0008 -0.0022 -0.0005 -0.0009 -0.0021 -0.0005 -0.0011 -0.0020 -0.0006 -0.0013 -0.0019 -0.0006 -0.0014 -0.0017 -0.0006 -0.0016 -0.0016 -0.0006 -0.0017 -0.0014 -0.0006 -0.0019 -0.0013 -0.0006 -0.0020 -0.0011 -0.0006 Page 139 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 LOAD 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 10 11 12 X-TRANS 0.6617 0.2919 0.1823 0.6802 0.2324 0.1617 0.6827 0.1721 0.1344 0.6707 0.1152 0.1037 0.6502 0.0656 0.0735 -0.0214 0.0002 -0.0373 0.0002 -0.0214 -0.0373 -0.0048 0.0144 -0.0189 0.0144 -0.0048 -0.0189 0.0133 0.0267 -0.0033 0.0267 0.0133 -0.0033 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 RADIANS) Y-TRANS -0.8637 -1.0878 -1.1695 -0.8256 -1.1017 -1.1548 -0.7849 -1.1112 -1.1355 -0.7425 -1.1178 -1.1134 -0.6998 -1.1237 -1.0906 -3.9944 -3.3221 -4.0629 -3.3221 -3.9944 -4.0629 -3.9838 -3.3170 -4.0306 -3.3170 -3.9838 -4.0306 -3.9874 -3.3377 -4.0085 -3.3377 -3.9874 -4.0085 -1.0769 -0.6703 -1.0448 -0.6703 -1.0769 -1.0448 -0.9521 -0.9521 -1.1408 140 STRUCTURE TYPE = SPACE Z-TRANS -0.2619 0.2251 -0.0219 -0.2663 0.2186 -0.0286 -0.2697 0.2132 -0.0341 -0.2716 0.2102 -0.0371 -0.2720 0.2096 -0.0377 -0.3626 0.3541 -0.0080 -0.3541 0.3626 0.0080 -0.3765 0.3681 -0.0078 -0.3681 0.3765 0.0078 -0.3428 0.3334 -0.0089 -0.3334 0.3428 0.0089 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 X-ROTAN -0.0004 0.0002 -0.0001 -0.0004 0.0001 -0.0002 -0.0004 0.0001 -0.0002 -0.0004 0.0000 -0.0002 -0.0004 0.0001 -0.0002 -0.0040 -0.0029 -0.0034 0.0029 0.0040 0.0034 -0.0040 -0.0030 -0.0034 0.0030 0.0040 0.0034 -0.0039 -0.0030 -0.0034 0.0030 0.0039 0.0034 -0.0010 0.0005 -0.0003 -0.0005 0.0010 0.0003 -0.0006 0.0006 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Y-ROTAN 0.0002 -0.0005 -0.0002 0.0001 -0.0006 -0.0002 -0.0001 -0.0006 -0.0003 -0.0002 -0.0005 -0.0003 -0.0002 -0.0004 -0.0003 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Z-ROTAN -0.0021 -0.0009 -0.0005 -0.0022 -0.0008 -0.0005 -0.0022 -0.0006 -0.0004 -0.0022 -0.0005 -0.0004 -0.0022 -0.0004 -0.0004 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0001 0.0000 -0.0001 0.0000 0.0000 -0.0002 0.0007 -0.0001 0.0007 -0.0002 -0.0001 0.0003 0.0003 -0.0001 Page 140 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 141 ************** END OF LATEST ANALYSIS RESULT ************** 1412. 1413. 1414. 1415. 1416. 1417. 1418. 1419. 1420. 1421. 1422. 1423. LOAD LIST 7 TO 9 UNIT KG CM START CONCRETE DESIGN CODE ACI FC 350 ALL FYMAIN 4200 ALL CLB 5 MEMB 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 4055 CLT 5 MEMB 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 4055 DESIGN COLUMN 2479 TO 2482 2525 TO 2528 2652 TO 2654 2676 TO 2678 2700 TO 2702 2715 TO 2717 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 141 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 142 ==================================================================== COLUMN FY - 411.9 NO. FC - 2479 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2480 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2481 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 0.650 Page 142 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 143 ==================================================================== COLUMN FY - 411.9 NO. FC - 2482 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2525 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2526 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 0.650 Page 143 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 144 ==================================================================== COLUMN FY - 411.9 NO. FC - 2527 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2528 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2652 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 0.650 Page 144 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 145 ==================================================================== COLUMN FY - 411.9 NO. FC - 2653 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2654 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2676 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 0.650 Page 145 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 146 ==================================================================== COLUMN FY - 411.9 NO. FC - 2677 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2678 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2700 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 0.650 Page 146 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 147 ==================================================================== COLUMN FY - 411.9 NO. FC - 2701 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2702 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2715 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl 0.650 Page 147 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 148 ==================================================================== COLUMN FY - 411.9 NO. FC - 2716 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ==================================================================== COLUMN FY - 411.9 NO. FC - 2717 DESIGN PER ACI 318-02 - AXIAL + BENDING 34.3 MPA, SQRE SIZE - 300.0 X 300.0 MMS, TIED ONLY MINIMUM STEEL IS REQUIRED. AREA OF STEEL REQUIRED = 900.0 SQ. MM BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI ---------------------------------------------------------8 - 12 MM 1.005 7 (PROVIDE EQUAL NUMBER OF BARS ON EACH FACE) END 0.650 ********************END OF COLUMN DESIGN RESULTS******************** 1424. DESIGN BEAM 2703 TO 2714 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 148 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 149 ===================================================================== BEAM LEN - NO. 4000. MM 2703 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. B E A M 17 - 12MM N O. 0. 2703 D E S I G N 4000. YES YES R E S U L T S - SHEAR AT START SUPPORT - Vu= 56.93 KNS Vc= 156.04 KNS Vs= 0.00 KNS Tu= 0.02 KN-MET Tc= 6.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. AT END SUPPORT - Vu= 14.03 KNS Vc= 156.04 KNS Vs= 0.00 KNS Tu= 0.02 KN-MET Tc= 6.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. ___1073J____________________ 4000X1200X 200_____________________1366J____ | | | | | | |17No12cHc 57. 0.TO 4000 25*12c/c 78 | ||=========================================================================|| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |17#12 | |17#12 | |17#12 | | ooooooooooooooooo | | ooooooooooooooooo | | ooooooooooooooooo | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 149 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 150 ===================================================================== BEAM LEN - NO. 4000. MM 2704 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. 16 - 12MM 0. 2303. ***MEMBER FAILS IN MAX REINFORCEMENT. INCREASE MEMBER SIZE. MAX NEG MOMENT = 170.30 KN-MET, LOADING YES NO 8 ___1366J____________________ 4000X1200X 200_____________________1123J____ | | | | | | |16No12 H 57. 0.TO 2303 | ||========================================== | | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |16#12 | |16#12 | | | | oooooooooooooooo | | oooooooooooooooo | | | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ===================================================================== BEAM LEN - NO. 4000. MM 2705 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. 16 - 12MM 1530. ***MEMBER FAILS IN MAX REINFORCEMENT. INCREASE MEMBER SIZE. MAX NEG MOMENT = 170.30 KN-MET, LOADING 4000. NO YES 7 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 150 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 151 ___1123J____________________ 4000X1200X 200_____________________1367J____ | | | | | | | 16No12 H 57.1530.TO 4000 | | ==============================================|| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | | | |16#12 | |16#12 | | | | oooooooooooooooo | | oooooooooooooooo | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ===================================================================== BEAM LEN - NO. 4000. MM 2706 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. B E A M 17 - 12MM N O. 0. 2706 D E S I G N 3968. YES NO R E S U L T S - SHEAR AT START SUPPORT - Vu= 14.25 KNS Vc= 181.72 KNS Vs= 0.00 KNS Tu= 0.14 KN-MET Tc= 7.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. AT END SUPPORT - Vu= 56.70 KNS Vc= 181.72 KNS Vs= 0.00 KNS Tu= 0.14 KN-MET Tc= 7.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 151 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 152 ___1367J____________________ 4000X1200X 200_____________________1173J____ | | | | | | |17No12cHc 57. 0.TO 3968 25*12c/c 78 | ||==========================================================================| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |17#12 | |17#12 | | | | ooooooooooooooooo | | ooooooooooooooooo | | | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ===================================================================== BEAM LEN - NO. 4000. MM 2707 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. B E A M 17 - 12MM N O. 0. 2707 D E S I G N 4000. YES YES R E S U L T S - SHEAR AT START SUPPORT - Vu= 56.99 KNS Vc= 157.41 KNS Vs= 0.00 KNS Tu= 0.09 KN-MET Tc= 6.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. AT END SUPPORT - Vu= 13.96 KNS Vc= 157.41 KNS Vs= 0.00 KNS Tu= 0.09 KN-MET Tc= 6.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 152 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 153 ___1081J____________________ 4000X1200X 200_____________________1368J____ | | | | | | |17No12cHc 57. 0.TO 4000 25*12c/c 78 | ||=========================================================================|| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |17#12 | |17#12 | |17#12 | | ooooooooooooooooo | | ooooooooooooooooo | | ooooooooooooooooo | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ===================================================================== BEAM LEN - NO. 4000. MM 2708 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. 16 - 12MM 0. ***MEMBER FAILS IN MAX REINFORCEMENT. INCREASE MEMBER SIZE. MAX NEG MOMENT = 170.40 KN-MET, LOADING 2304. YES NO 8 ___1368J____________________ 4000X1200X 200_____________________1131J____ | | | | | | |16No12 H 57. 0.TO 2304 | ||========================================== | | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |16#12 | |16#12 | | | | oooooooooooooooo | | oooooooooooooooo | | | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 153 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 154 ===================================================================== BEAM LEN - NO. 4000. MM 2709 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. 16 - 12MM 1529. 4000. ***MEMBER FAILS IN MAX REINFORCEMENT. INCREASE MEMBER SIZE. MAX NEG MOMENT = 170.40 KN-MET, LOADING NO YES 7 ___1131J____________________ 4000X1200X 200_____________________1369J____ | | | | | | | 16No12 H 57.1529.TO 4000 | | ==============================================|| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | | | |16#12 | |16#12 | | | | oooooooooooooooo | | oooooooooooooooo | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ===================================================================== BEAM LEN - NO. 4000. MM 2710 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. B E A M 17 - 12MM N O. 0. 2710 D E S I G N 3968. YES NO R E S U L T S - SHEAR C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 154 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 155 AT START SUPPORT - Vu= 14.32 KNS Vc= 180.74 KNS Vs= 0.00 KNS Tu= 0.10 KN-MET Tc= 7.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. AT END SUPPORT - Vu= 56.63 KNS Vc= 180.74 KNS Vs= 0.00 KNS Tu= 0.10 KN-MET Tc= 7.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. ___1369J____________________ 4000X1200X 200_____________________1181J____ | | | | | | |17No12cHc 57. 0.TO 3968 25*12c/c 78 | ||==========================================================================| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |17#12 | |17#12 | | | | ooooooooooooooooo | | ooooooooooooooooo | | | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ===================================================================== BEAM LEN - NO. 4000. MM 2711 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. B E A M 17 - 12MM N O. 0. 2711 D E S I G N 4000. YES YES R E S U L T S - SHEAR C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 155 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 156 AT START SUPPORT - Vu= 56.89 KNS Vc= 153.47 KNS Vs= 0.00 KNS Tu= 0.32 KN-MET Tc= 6.4 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. AT END SUPPORT - Vu= 14.06 KNS Vc= 153.47 KNS Vs= 0.00 KNS Tu= 0.32 KN-MET Tc= 6.4 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. ___1089J____________________ 4000X1200X 200_____________________1370J____ | | | | | | |17No12cHc 57. 0.TO 4000 25*12c/c 78 | ||=========================================================================|| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |17#12 | |17#12 | |17#12 | | ooooooooooooooooo | | ooooooooooooooooo | | ooooooooooooooooo | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ===================================================================== BEAM LEN - NO. 4000. MM 2712 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. 16 - 12MM 0. ***MEMBER FAILS IN MAX REINFORCEMENT. INCREASE MEMBER SIZE. MAX NEG MOMENT = 170.95 KN-MET, LOADING 2303. YES NO 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 156 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 157 ___1370J____________________ 4000X1200X 200_____________________1139J____ | | | | | | |16No12 H 57. 0.TO 2303 | ||========================================== | | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |16#12 | |16#12 | | | | oooooooooooooooo | | oooooooooooooooo | | | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ===================================================================== BEAM LEN - NO. 4000. MM 2713 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. 16 - 12MM 1531. ***MEMBER FAILS IN MAX REINFORCEMENT. INCREASE MEMBER SIZE. MAX NEG MOMENT = 170.95 KN-MET, LOADING 4000. NO YES 7 ___1139J____________________ 4000X1200X 200_____________________1371J____ | | | | | | | 16No12 H 57.1531.TO 4000 | | ==============================================|| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | | | |16#12 | |16#12 | | | | oooooooooooooooo | | oooooooooooooooo | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 157 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 158 ===================================================================== BEAM LEN - NO. 4000. MM 2714 DESIGN RESULTS - FLEXURE PER CODE ACI 318-02 FY - 412. FC - 34. MPA, SIZE - 1200. X 200. MMS LEVEL HEIGHT BAR INFO FROM TO ANCHOR (MM) (MM) (MM) STA END _____________________________________________________________________ 1 57. B E A M 17 - 12MM N O. 0. 2714 D E S I G N 3967. YES NO R E S U L T S - SHEAR AT START SUPPORT - Vu= 14.35 KNS Vc= 181.42 KNS Vs= 0.00 KNS Tu= 0.04 KN-MET Tc= 7.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. AT END SUPPORT - Vu= 56.60 KNS Vc= 181.42 KNS Vs= 0.00 KNS Tu= 0.04 KN-MET Tc= 7.5 KN-MET Ts= 0.0 KN-MET LOAD 7 NO STIRRUPS ARE REQUIRED FOR TORSION. REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1. PROVIDE 12 MM 2-LEGGED STIRRUPS AT 78. MM C/C FOR 1864. MM ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 0.00 SQ.CM. ___1371J____________________ 4000X1200X 200_____________________1189J____ | | | | | | |17No12cHc 57. 0.TO 3967 25*12c/c 78 | ||==========================================================================| | | | | |___________________________________________________________________________| _______________________ _______________________ _______________________ | | | | | | | | | | | | | | | | | | |17#12 | |17#12 | | | | ooooooooooooooooo | | ooooooooooooooooo | | | | | | | | | | | | | | | |_______________________| |_______________________| |_______________________| ********************END OF BEAM DESIGN************************** 1425. DESIGN ELEMENT 2718 TO 4055 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 158 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 159 ELEMENT DESIGN SUMMARY ---------------------ELEMENT LONG. REINF (SQ.MM/MM) MOM-X /LOAD (KN-MM/MM) TRANS. REINF (SQ.MM/MM) MOM-Y /LOAD (KN-MM/MM) 2718 2718 2718 2718 2718 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.07 0.600 5.47 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.23 / 8.15 / 7 8 2719 2719 2719 2719 2719 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.84 0.600 11.69 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 10.28 / 0.00 / 7 8 2720 2720 2720 2720 2720 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 42.30 0.600 17.86 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.18 / 0.00 / 9 8 2721 2721 2721 2721 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.618 54.85 BOTT: 0.600 21.23 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 17.50 / / 8 0.600 0.00 / 9 8 2722 2722 2722 2722 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.640 56.69 BOTT: 0.600 20.85 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 17.25 / / 8 0.600 0.00 / 9 8 2723 2723 2723 2723 2723 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.58 0.600 16.75 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.77 / 0.00 / 9 8 2724 2724 2724 2724 2724 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.06 0.600 10.15 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.54 / 1.81 / 7 8 2725 TOP : Longitudinal direction - Only minimum steel required. 2725 BOTT: Longitudinal direction - Only minimum steel required. 2725 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 159 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 2725 BOTT: Transverse direction - Only minimum steel required. 2725 TOP : 0.600 6.43 / 7 0.600 0.00 / BOTT: 0.600 5.12 / 8 0.600 16.36 / 160 7 9 2726 2726 2726 2726 2726 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.77 0.600 5.56 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 15.73 / 7 9 2727 2727 2727 2727 2727 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.99 0.600 11.14 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.10 / 1.81 / 7 8 2728 2728 2728 2728 2728 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.32 0.600 18.02 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.45 / 0.00 / 7 8 2729 2729 2729 2729 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.674 59.67 BOTT: 0.600 22.11 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 17.78 / / 8 0.600 0.00 / 9 8 2730 2730 2730 2730 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.673 59.60 BOTT: 0.600 22.05 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 17.71 / / 8 0.600 0.00 / 9 8 2731 2731 2731 2731 2731 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.10 0.600 17.84 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.30 / 0.00 / 7 8 2732 2732 2732 2732 2732 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.68 0.600 10.86 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.94 / 1.59 / 7 8 2733 2733 2733 2733 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 160 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2733 TOP : BOTT: -- PAGE NO. 0.600 0.600 6.61 / 5.47 / 7 8 0.600 0.600 161 0.00 / 15.12 / 7 9 2734 2734 2734 2734 2734 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.74 0.600 5.95 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 15.26 / 7 9 2735 2735 2735 2735 2735 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.88 0.600 11.89 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.69 / 2.06 / 7 8 2736 2736 2736 2736 2736 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.18 0.600 19.46 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.84 / 0.00 / 7 8 2737 2737 2737 2737 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.669 59.28 BOTT: 0.600 24.50 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 16.95 / / 8 0.600 0.00 / 9 8 2738 2738 2738 2738 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.661 58.53 BOTT: 0.600 25.60 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 17.14 / / 8 0.600 0.00 / 9 8 2739 2739 2739 2739 2739 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 46.91 0.600 22.38 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.69 / 0.00 / 7 8 2740 2740 2740 2740 2740 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 25.48 0.600 15.30 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 9.38 / 0.00 / 7 8 2741 2741 2741 2741 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 161 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2741 TOP : BOTT: -- PAGE NO. 0.600 0.600 5.29 / 7.40 / 7 8 0.600 0.600 162 0.00 / 9.00 / 7 8 2742 2742 2742 2742 2742 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.14 0.600 1.56 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.39 / 19.91 / 7 8 2743 2743 2743 2743 2743 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.18 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.47 / 0.00 / 7 8 2744 2744 2744 2744 2744 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.76 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.54 / 0.00 / 9 8 2745 2745 2745 2745 2745 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 43.18 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.89 / 0.00 / 9 8 2746 2746 2746 2746 2746 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 42.11 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.30 / 0.00 / 9 8 2747 2747 2747 2747 2747 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.17 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.00 / 0.00 / 9 8 2748 2748 2748 2748 2748 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.42 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.88 / 0.00 / 7 8 2749 2749 2749 2749 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 162 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2749 TOP : BOTT: -- PAGE NO. 0.600 0.600 1.69 / 4.02 / 7 8 0.600 0.600 163 0.00 / 36.85 / 7 9 2750 2750 2750 2750 2750 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.76 0.600 4.16 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 35.34 / 7 9 2751 2751 2751 2751 2751 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.20 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.99 / 0.00 / 7 9 2752 2752 2752 2752 2752 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.52 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.71 / 0.00 / 9 9 2753 2753 2753 2753 2753 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.78 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.42 / 0.00 / 9 9 2754 2754 2754 2754 2754 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.68 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.24 / 0.00 / 9 9 2755 2755 2755 2755 2755 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.28 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.31 / 0.00 / 9 9 2756 2756 2756 2756 2756 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.97 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.81 / 0.00 / 7 9 2757 2757 2757 2757 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 163 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2757 TOP : BOTT: -- PAGE NO. 0.600 0.600 1.75 / 4.09 / 7 8 0.600 0.600 164 0.00 / 34.74 / 7 8 2758 2758 2758 2758 2758 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.79 0.600 4.11 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 36.42 / 7 8 2759 2759 2759 2759 2759 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.96 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.06 / 0.00 / 7 8 2760 2760 2760 2760 2760 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.28 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.39 / 0.00 / 9 8 2761 2761 2761 2761 2761 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.92 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.97 / 0.00 / 9 8 2762 2762 2762 2762 2762 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 41.70 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.99 / 0.00 / 9 8 2763 2763 2763 2763 2763 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 35.95 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.07 / 0.00 / 9 8 2764 2764 2764 2764 2764 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.12 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.87 / 0.00 / 9 8 2765 2765 2765 2765 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 164 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2765 TOP : BOTT: -- PAGE NO. 0.600 0.600 9.09 / 1.54 / 7 8 0.600 0.600 165 4.48 / 19.87 / 7 8 2766 2766 2766 2766 2766 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.32 0.600 1.06 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 31.58 / 32.09 / 7 8 2767 2767 2767 2767 2767 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.20 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.70 / 0.00 / 9 8 2768 2768 2768 2768 2768 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.01 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 31.38 / 0.00 / 9 8 2769 2769 2769 2769 2769 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.47 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 36.37 / 0.00 / 8 8 2770 2770 2770 2770 2770 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 30.76 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.26 / 0.00 / 8 8 2771 2771 2771 2771 2771 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.81 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.26 / 0.00 / 8 8 2772 2772 2772 2772 2772 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.07 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.96 / 0.71 / 8 9 2773 TOP : Longitudinal direction - Only minimum steel required. 2773 BOTT: Longitudinal direction - Only minimum steel required. 2773 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 165 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2773 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 6.48 / 9 8 0.600 0.665 166 0.00 / 55.77 / 8 8 2774 2774 2774 2774 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 6.50 / 8 0.664 55.69 / 8 8 2775 2775 2775 2775 2775 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.87 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.85 / 0.00 / 7 8 2776 2776 2776 2776 2776 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.10 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.56 / 0.00 / 8 8 2777 2777 2777 2777 2777 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.42 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 36.73 / 0.00 / 8 8 2778 2778 2778 2778 2778 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.54 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 36.99 / 0.00 / 8 8 2779 2779 2779 2779 2779 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.36 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 28.12 / 0.00 / 8 8 2780 2780 2780 2780 2780 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.00 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.82 / 0.00 / 8 8 2781 TOP : Longitudinal direction - Only minimum steel required. 2781 BOTT: Longitudinal direction - Only minimum steel required. 2781 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 166 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2781 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 6.78 / 8 8 0.600 0.689 167 0.00 / 57.72 / 8 8 2782 2782 2782 2782 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 6.60 / 8 0.715 59.86 / 8 8 2783 2783 2783 2783 2783 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.68 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.98 / 0.96 / 8 9 2784 2784 2784 2784 2784 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 25.73 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 28.25 / 0.00 / 8 9 2785 2785 2785 2785 2785 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.64 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.44 / 0.00 / 8 9 2786 2786 2786 2786 2786 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 35.15 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.73 / 0.00 / 8 9 2787 2787 2787 2787 2787 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 30.02 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 36.35 / 0.00 / 8 9 2788 2788 2788 2788 2788 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.88 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.86 / 0.00 / 9 9 2789 2789 2789 2789 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 167 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2789 TOP : BOTT: -- PAGE NO. 0.600 0.600 8.54 / 0.00 / 7 8 0.600 0.600 168 15.23 / 29.17 / 7 8 2790 2790 2790 2790 2790 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.58 0.600 1.33 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 42.16 / 41.83 / 7 8 2791 2791 2791 2791 2791 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.93 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 29.25 / 0.00 / 9 8 2792 2792 2792 2792 2792 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.90 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.76 / 0.00 / 8 8 2793 2793 2793 2793 2793 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 42.12 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.73 / 0.00 / 8 8 2794 2794 2794 2794 2794 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.93 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 44.38 / 0.00 / 8 8 2795 2795 2795 2795 2795 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.37 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 33.45 / 0.00 / 8 8 2796 2796 2796 2796 2796 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.20 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.01 / 2.74 / 8 7 2797 TOP : Longitudinal direction - Only minimum steel required. 2797 BOTT: Longitudinal direction - Only minimum steel required. 2797 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 168 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2797 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 7.69 / 8 8 0.600 0.838 169 0.00 / 69.90 / 8 8 2798 2798 2798 2798 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 7.71 / 8 0.835 69.67 / 8 8 2799 2799 2799 2799 2799 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.12 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.96 / 0.86 / 8 7 2800 2800 2800 2800 2800 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.00 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.03 / 0.00 / 8 7 2801 2801 2801 2801 2801 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 39.90 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 46.13 / 0.00 / 8 7 2802 2802 2802 2802 2802 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 39.95 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 46.38 / 0.00 / 8 7 2803 2803 2803 2803 2803 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.07 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.51 / 0.00 / 8 7 2804 2804 2804 2804 2804 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.02 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.82 / 0.77 / 8 7 2805 TOP : Longitudinal direction - Only minimum steel required. 2805 BOTT: Longitudinal direction - Only minimum steel required. 2805 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 169 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2805 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 8.15 / 8 8 0.600 0.866 170 0.00 / 72.19 / 8 8 2806 2806 2806 2806 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 7.88 / 8 0.892 74.29 / 8 8 2807 2807 2807 2807 2807 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 15.91 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.86 / 2.34 / 8 9 2808 2808 2808 2808 2808 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.81 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.47 / 0.00 / 8 9 2809 2809 2809 2809 2809 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 45.70 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 47.77 / 0.00 / 8 9 2810 2810 2810 2810 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 47.68 / 8 0.600 50.45 / BOTT: 0.600 0.00 / 8 0.600 0.00 / 8 9 2811 2811 2811 2811 2811 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.54 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.10 / 0.00 / 8 9 2812 2812 2812 2812 2812 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.16 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.11 / 0.00 / 9 9 2813 2813 2813 2813 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 170 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2813 TOP : BOTT: -- PAGE NO. 0.600 0.600 7.34 / 0.00 / 9 8 0.600 0.600 171 22.12 / 34.19 / 7 8 2814 2814 2814 2814 2814 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.86 0.600 0.83 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 43.76 / 45.02 / 7 8 2815 2815 2815 2815 2815 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.49 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.64 / 0.00 / 9 8 2816 2816 2816 2816 2816 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 41.46 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.86 / 0.00 / 8 8 2817 2817 2817 2817 2817 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.77 0.600 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 47.20 / 0.00 / 8 8 2818 2818 2818 2818 2818 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 48.56 0.600 1.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.93 / 0.00 / 8 8 2819 2819 2819 2819 2819 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.89 0.600 2.42 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.69 / 0.00 / 8 8 2820 2820 2820 2820 2820 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.26 0.600 2.79 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.17 / 4.46 / 8 7 2821 TOP : Longitudinal direction - Only minimum steel required. 2821 BOTT: Longitudinal direction - Only minimum steel required. 2821 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 171 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2821 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 6.92 / 8 8 0.600 0.871 172 0.00 / 72.56 / 8 8 2822 2822 2822 2822 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 6.92 / 8 0.867 72.28 / 8 8 2823 2823 2823 2823 2823 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.19 0.600 3.80 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.14 / 2.69 / 8 7 2824 2824 2824 2824 2824 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.50 0.600 4.70 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.30 / 0.00 / 8 7 2825 2825 2825 2825 2825 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.46 0.600 5.12 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 47.73 / 0.00 / 8 7 2826 2826 2826 2826 2826 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.46 0.600 5.11 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 47.93 / 0.00 / 8 7 2827 2827 2827 2827 2827 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.47 0.600 4.64 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.65 / 0.00 / 8 7 2828 2828 2828 2828 2828 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.00 0.600 3.66 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.83 / 2.49 / 8 7 2829 TOP : Longitudinal direction - Only minimum steel required. 2829 BOTT: Longitudinal direction - Only minimum steel required. 2829 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 172 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2829 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 7.38 / 8 8 0.600 0.898 173 0.00 / 74.81 / 8 8 2830 2830 2830 2830 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 7.13 / 8 0.919 76.47 / 8 8 2831 2831 2831 2831 2831 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.60 0.600 3.28 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.90 / 3.85 / 8 7 2832 2832 2832 2832 2832 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.65 0.600 3.63 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.38 / 0.00 / 8 7 2833 2833 2833 2833 2833 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 52.49 0.600 3.06 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 48.85 / 0.00 / 8 7 2834 BOTT: Longitudinal direction 2834 BOTT: Transverse direction 2834 TOP : 0.615 54.57 BOTT: 0.600 1.57 - Only minimum steel required. - Only minimum steel required. / 8 0.611 51.36 / / 7 0.600 0.00 / 8 7 2835 2835 2835 2835 2835 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 46.73 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 46.69 / 0.00 / 8 7 2836 2836 2836 2836 2836 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.54 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.14 / 0.00 / 8 7 2837 2837 2837 2837 2837 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.24 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.25 / 33.65 / 7 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 173 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 174 2838 2838 2838 2838 2838 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.07 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.18 / 37.95 / 7 8 2839 2839 2839 2839 2839 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.51 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 21.82 / 0.00 / 9 8 2840 2840 2840 2840 2840 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 39.23 0.600 5.37 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 34.74 / 0.00 / 8 8 2841 2841 2841 2841 2841 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 45.93 0.600 9.08 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.61 / 0.00 / 8 8 2842 2842 2842 2842 2842 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 45.06 0.600 10.58 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.76 / 0.30 / 8 7 2843 2843 2843 2843 2843 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.61 0.600 9.81 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 30.95 / 2.62 / 8 7 2844 2844 2844 2844 2844 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.41 0.600 6.71 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.36 / 5.03 / 8 7 2845 2845 2845 2845 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 4.33 / 8 0.728 60.97 / 8 8 2846 TOP : Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 174 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 175 2846 BOTT: Longitudinal direction 2846 TOP : Transverse direction 2846 TOP : 0.600 0.00 BOTT: 0.600 4.26 - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 8 0.726 60.78 / 8 8 2847 2847 2847 2847 2847 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.58 0.600 7.09 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.17 / 3.64 / 8 7 2848 2848 2848 2848 2848 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.72 0.600 10.80 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 32.35 / 1.00 / 8 7 2849 2849 2849 2849 2849 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 44.78 0.600 12.53 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 39.44 / 0.00 / 8 7 2850 2850 2850 2850 2850 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 44.78 0.600 12.50 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 39.58 / 0.00 / 8 7 2851 2851 2851 2851 2851 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.68 0.600 10.70 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 32.58 / 0.99 / 8 7 2852 2852 2852 2852 2852 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.42 0.600 6.93 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.84 / 3.40 / 8 7 2853 2853 2853 2853 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 4.64 / 8 0.752 62.90 / 8 8 2854 TOP : Longitudinal direction - Only minimum steel required. 2854 BOTT: Longitudinal direction - Only minimum steel required. 2854 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 175 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2854 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 4.51 / 8 8 0.600 0.764 176 0.00 / 63.87 / 8 8 2855 2855 2855 2855 2855 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.22 0.600 6.83 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.09 / 4.55 / 8 7 2856 2856 2856 2856 2856 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 38.31 0.600 10.23 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 32.11 / 2.49 / 8 7 2857 2857 2857 2857 2857 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.56 0.600 11.41 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 39.81 / 0.44 / 8 7 2858 2858 2858 2858 2858 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.14 0.600 10.49 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 41.59 / 0.00 / 8 7 2859 2859 2859 2859 2859 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 43.09 0.600 7.53 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 39.17 / 0.00 / 8 7 2860 2860 2860 2860 2860 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 27.73 0.600 2.56 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.50 / 0.00 / 8 7 2861 2861 2861 2861 2861 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.71 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.72 / 26.70 / 7 8 2862 2862 2862 2862 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 176 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2862 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.98 / 0.76 / 9 8 0.600 0.600 177 22.46 / 21.96 / 7 8 2863 2863 2863 2863 2863 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.82 0.600 7.27 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 11.51 / 0.00 / 9 8 2864 2864 2864 2864 2864 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.70 0.600 12.48 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.00 / 0.00 / 8 8 2865 2865 2865 2865 2865 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.88 0.600 14.41 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.73 / 1.33 / 8 7 2866 2866 2866 2866 2866 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.01 0.600 14.13 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.53 / 2.18 / 8 7 2867 2867 2867 2867 2867 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.80 0.600 12.05 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 16.58 / 3.24 / 8 7 2868 2868 2868 2868 2868 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.06 0.600 7.98 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.02 / 4.03 / 8 7 2869 2869 2869 2869 2869 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.83 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.74 / 35.72 / 7 8 2870 2870 2870 2870 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 177 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2870 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 2.46 / 8 7 0.600 0.600 178 1.32 / 35.67 / 7 8 2871 2871 2871 2871 2871 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.80 0.600 7.44 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.57 / 3.17 / 8 7 2872 2872 2872 2872 2872 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.08 0.600 11.08 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.62 / 2.14 / 8 7 2873 2873 2873 2873 2873 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.76 0.600 12.66 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.98 / 1.08 / 8 7 2874 2874 2874 2874 2874 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.76 0.600 12.61 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.05 / 1.08 / 8 7 2875 2875 2875 2875 2875 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.07 0.600 10.95 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.74 / 2.09 / 8 7 2876 2876 2876 2876 2876 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.70 0.600 7.28 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.34 / 2.95 / 8 7 2877 2877 2877 2877 2877 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.60 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.73 / 37.12 / 7 8 2878 2878 2878 2878 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 178 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2878 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 2.76 / 8 8 0.600 0.600 179 1.17 / 37.39 / 7 8 2879 2879 2879 2879 2879 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.13 0.600 7.81 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.80 / 3.78 / 8 7 2880 2880 2880 2880 2880 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.99 0.600 11.74 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.08 / 3.19 / 8 7 2881 2881 2881 2881 2881 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.30 0.600 13.62 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.48 / 2.20 / 8 7 2882 2882 2882 2882 2882 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.37 0.600 13.71 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.20 / 1.47 / 8 7 2883 2883 2883 2883 2883 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.63 0.600 11.80 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.43 / 0.28 / 8 7 2884 2884 2884 2884 2884 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.39 0.600 7.07 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.79 / 0.00 / 8 7 2885 2885 2885 2885 2885 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.64 0.600 0.50 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.22 / 14.73 / 7 8 2886 2886 2886 2886 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 179 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2886 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 17.59 / Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 45.80 / / 9 8 Only Only Only Only 9 8 0.600 0.600 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 180 5.64 / 8.85 / 7 8 required. required. required. required. 0.14 / 4.26 / 7 8 2887 2887 2887 2887 2887 TOP : BOTT: TOP : BOTT: TOP : BOTT: 2888 2888 2888 2888 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.821 72.43 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 8 0.600 7.78 / 7 8 2889 2889 2889 2889 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.968 84.97 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 8 0.600 9.90 / 7 8 2890 2890 2890 2890 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.940 82.56 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 8 0.600 9.46 / 7 8 2891 2891 2891 2891 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.746 65.92 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 8 0.600 6.81 / 7 8 2892 2892 2892 2892 2892 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 38.16 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.59 / 7 8 2893 2893 2893 2893 2893 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.22 0.600 13.72 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.83 / 12.21 / 7 8 2894 2894 2894 2894 2894 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.62 0.600 13.30 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.00 / 12.20 / 7 8 2895 TOP : Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 180 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 181 2895 2895 2895 2895 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 1.41 BOTT: 0.600 36.69 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 8 0.600 4.21 / 7 8 2896 2896 2896 2896 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 1.44 BOTT: 0.713 63.03 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.47 / / 8 0.600 6.05 / 7 8 2897 2897 2897 2897 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.98 BOTT: 0.883 77.70 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.76 / / 8 0.600 8.21 / 7 8 2898 2898 2898 2898 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 1.03 BOTT: 0.883 77.74 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.77 / / 8 0.600 8.20 / 7 8 2899 2899 2899 2899 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 1.61 BOTT: 0.713 63.08 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.51 / / 8 0.600 6.04 / 7 8 2900 2900 2900 2900 2900 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.70 0.600 36.66 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.29 / 7 8 2901 2901 2901 2901 2901 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.87 0.600 13.25 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.03 / 12.81 / 7 8 2902 2902 2902 2902 2902 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.38 0.600 13.88 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.84 / 12.81 / 7 8 2903 2903 2903 2903 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 181 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2903 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.19 / 39.01 / 7 8 0.600 0.600 182 0.00 / 4.79 / 7 8 2904 2904 2904 2904 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.768 67.85 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 8 0.600 7.00 / 7 8 2905 2905 2905 2905 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.975 85.53 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 8 0.600 9.69 / 7 8 2906 2906 2906 2906 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 1.013 88.80 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 8 0.600 10.07 / 7 8 2907 2907 2907 2907 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.871 76.70 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 8 0.600 7.61 / 7 8 2908 2908 2908 2908 2908 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 49.40 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.98 / 3.14 / 7 8 2909 2909 2909 2909 2909 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 18.39 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.37 / 6.63 / 7 8 2910 2910 2910 2910 2910 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 17.59 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.64 / 8.85 / 8 7 2911 2911 2911 2911 2911 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 45.80 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 4.26 / 8 7 2912 TOP : Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 182 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 183 2912 TOP : Transverse direction 2912 BOTT: Transverse direction 2912 TOP : 0.600 0.00 BOTT: 0.821 72.43 - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 7 0.600 7.78 / 8 7 2913 2913 2913 2913 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.968 84.97 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 7 0.600 9.90 / 8 7 2914 2914 2914 2914 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.940 82.56 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 7 0.600 9.46 / 8 7 2915 2915 2915 2915 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.746 65.92 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 7 0.600 6.81 / 8 7 2916 2916 2916 2916 2916 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 38.16 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.59 / 8 7 2917 2917 2917 2917 2917 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.22 0.600 13.72 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.83 / 12.21 / 8 7 2918 2918 2918 2918 2918 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.62 0.600 13.30 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.00 / 12.20 / 8 7 2919 2919 2919 2919 2919 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.41 0.600 36.69 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.21 / 8 7 2920 TOP : Longitudinal direction - Only minimum steel required. 2920 TOP : Transverse direction - Only minimum steel required. 2920 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 183 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2920 TOP : BOTT: -- PAGE NO. 0.600 0.713 1.44 / 63.03 / 8 7 0.600 0.600 184 0.47 / 6.05 / 8 7 2921 2921 2921 2921 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.98 BOTT: 0.883 77.70 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.76 / / 7 0.600 8.21 / 8 7 2922 2922 2922 2922 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 1.03 BOTT: 0.883 77.74 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.77 / / 7 0.600 8.20 / 8 7 2923 2923 2923 2923 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 1.61 BOTT: 0.713 63.08 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.51 / / 7 0.600 6.04 / 8 7 2924 2924 2924 2924 2924 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.70 0.600 36.66 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.29 / 8 7 2925 2925 2925 2925 2925 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.87 0.600 13.25 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.03 / 12.81 / 8 7 2926 2926 2926 2926 2926 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.38 0.600 13.88 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.84 / 12.81 / 8 7 2927 2927 2927 2927 2927 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.19 0.600 39.01 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.79 / 8 7 2928 2928 2928 2928 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.768 67.85 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 7 0.600 7.00 / 8 7 2929 TOP : Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 184 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 185 2929 TOP : Transverse direction 2929 BOTT: Transverse direction 2929 TOP : 0.600 0.00 BOTT: 0.975 85.53 - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 7 0.600 9.69 / 8 7 2930 2930 2930 2930 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 1.013 88.80 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 7 0.600 10.07 / 8 7 2931 2931 2931 2931 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.871 76.70 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 7 0.600 7.61 / 8 7 2932 2932 2932 2932 2932 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 49.40 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.98 / 3.14 / 8 7 2933 2933 2933 2933 2933 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 18.39 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.37 / 6.63 / 8 7 2934 2934 2934 2934 2934 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.98 0.600 0.76 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.46 / 21.96 / 8 7 2935 2935 2935 2935 2935 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.82 0.600 7.27 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 11.51 / 0.00 / 9 7 2936 2936 2936 2936 2936 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.70 0.600 12.48 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.00 / 0.00 / 7 7 2937 2937 2937 2937 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 185 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2937 TOP : BOTT: -- PAGE NO. 0.600 0.600 11.88 / 14.41 / 7 8 0.600 0.600 186 18.73 / 1.33 / 7 8 2938 2938 2938 2938 2938 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.01 0.600 14.13 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.53 / 2.18 / 7 8 2939 2939 2939 2939 2939 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.80 0.600 12.05 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 16.58 / 3.24 / 7 8 2940 2940 2940 2940 2940 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.06 0.600 7.98 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.02 / 4.03 / 7 8 2941 2941 2941 2941 2941 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.83 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.74 / 35.72 / 8 7 2942 2942 2942 2942 2942 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.46 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.32 / 35.67 / 8 7 2943 2943 2943 2943 2943 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.80 0.600 7.44 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.57 / 3.17 / 7 8 2944 2944 2944 2944 2944 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.08 0.600 11.08 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.62 / 2.14 / 7 8 2945 2945 2945 2945 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 186 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2945 TOP : BOTT: -- PAGE NO. 0.600 0.600 13.76 / 12.66 / 7 8 0.600 0.600 187 19.98 / 1.08 / 7 8 2946 2946 2946 2946 2946 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.76 0.600 12.61 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.05 / 1.08 / 7 8 2947 2947 2947 2947 2947 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.07 0.600 10.95 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.74 / 2.09 / 7 8 2948 2948 2948 2948 2948 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.70 0.600 7.28 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.34 / 2.95 / 7 8 2949 2949 2949 2949 2949 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.60 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.73 / 37.12 / 8 7 2950 2950 2950 2950 2950 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.76 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.17 / 37.39 / 8 7 2951 2951 2951 2951 2951 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.13 0.600 7.81 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.80 / 3.78 / 7 8 2952 2952 2952 2952 2952 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.99 0.600 11.74 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.08 / 3.19 / 7 8 2953 2953 2953 2953 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 187 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2953 TOP : BOTT: -- PAGE NO. 0.600 0.600 12.30 / 13.62 / 7 8 0.600 0.600 188 19.48 / 2.20 / 7 8 2954 2954 2954 2954 2954 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.37 0.600 13.71 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.20 / 1.47 / 7 8 2955 2955 2955 2955 2955 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.63 0.600 11.80 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.43 / 0.28 / 7 8 2956 2956 2956 2956 2956 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.39 0.600 7.07 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.79 / 0.00 / 7 8 2957 2957 2957 2957 2957 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.64 0.600 0.50 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.22 / 14.73 / 8 7 2958 2958 2958 2958 2958 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.07 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.18 / 37.95 / 8 7 2959 2959 2959 2959 2959 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.51 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 21.82 / 0.00 / 9 7 2960 2960 2960 2960 2960 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 39.23 0.600 5.37 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 34.74 / 0.00 / 7 7 2961 2961 2961 2961 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 188 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2961 TOP : BOTT: -- PAGE NO. 0.600 0.600 45.93 / 9.08 / 7 8 0.600 0.600 189 38.61 / 0.00 / 7 7 2962 2962 2962 2962 2962 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 45.06 0.600 10.58 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.76 / 0.30 / 7 8 2963 2963 2963 2963 2963 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.61 0.600 9.81 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 30.95 / 2.62 / 7 8 2964 2964 2964 2964 2964 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.41 0.600 6.71 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.36 / 5.03 / 7 8 2965 2965 2965 2965 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 4.33 / 7 0.728 60.97 / 7 7 2966 2966 2966 2966 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 4.26 / 7 0.726 60.78 / 7 7 2967 2967 2967 2967 2967 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.58 0.600 7.09 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.17 / 3.64 / 7 8 2968 2968 2968 2968 2968 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.72 0.600 10.80 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 32.35 / 1.00 / 7 8 2969 2969 2969 2969 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 189 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2969 TOP : BOTT: -- PAGE NO. 0.600 0.600 44.78 / 12.53 / 7 8 0.600 0.600 190 39.44 / 0.00 / 7 8 2970 2970 2970 2970 2970 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 44.78 0.600 12.50 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 39.58 / 0.00 / 7 8 2971 2971 2971 2971 2971 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.68 0.600 10.70 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 32.58 / 0.99 / 7 8 2972 2972 2972 2972 2972 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.42 0.600 6.93 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.84 / 3.40 / 7 8 2973 2973 2973 2973 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 4.64 / 7 0.752 62.90 / 7 7 2974 2974 2974 2974 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 4.51 / 7 0.764 63.87 / 7 7 2975 2975 2975 2975 2975 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.22 0.600 6.83 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.09 / 4.55 / 7 8 2976 2976 2976 2976 2976 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 38.31 0.600 10.23 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 32.11 / 2.49 / 7 8 2977 2977 2977 2977 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 190 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2977 TOP : BOTT: -- PAGE NO. 0.600 0.600 47.56 / 11.41 / 7 8 0.600 0.600 191 39.81 / 0.44 / 7 8 2978 2978 2978 2978 2978 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.14 0.600 10.49 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 41.59 / 0.00 / 7 8 2979 2979 2979 2979 2979 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 43.09 0.600 7.53 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 39.17 / 0.00 / 7 8 2980 2980 2980 2980 2980 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 27.73 0.600 2.56 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.50 / 0.00 / 7 8 2981 2981 2981 2981 2981 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.71 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.72 / 26.70 / 8 7 2982 2982 2982 2982 2982 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.86 0.600 0.83 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 43.76 / 45.02 / 8 7 2983 2983 2983 2983 2983 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.49 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.64 / 0.00 / 9 7 2984 2984 2984 2984 2984 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 41.46 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.86 / 0.00 / 7 7 2985 2985 2985 2985 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 191 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2985 TOP : BOTT: -- PAGE NO. 0.600 0.600 49.77 / 0.00 / 7 7 0.600 0.600 192 47.20 / 0.00 / 7 7 2986 2986 2986 2986 2986 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 48.56 0.600 1.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.93 / 0.00 / 7 7 2987 2987 2987 2987 2987 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.89 0.600 2.42 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.69 / 0.00 / 7 7 2988 2988 2988 2988 2988 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.26 0.600 2.79 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.17 / 4.46 / 7 8 2989 2989 2989 2989 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 6.92 / 7 0.871 72.56 / 7 7 2990 2990 2990 2990 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 6.92 / 7 0.867 72.28 / 7 7 2991 2991 2991 2991 2991 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.19 0.600 3.80 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.14 / 2.69 / 7 8 2992 2992 2992 2992 2992 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.50 0.600 4.70 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.30 / 0.00 / 7 8 2993 2993 2993 2993 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 192 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 2993 TOP : BOTT: -- PAGE NO. 0.600 0.600 47.46 / 5.12 / 7 8 0.600 0.600 193 47.73 / 0.00 / 7 8 2994 2994 2994 2994 2994 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.46 0.600 5.11 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 47.93 / 0.00 / 7 8 2995 2995 2995 2995 2995 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.47 0.600 4.64 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.65 / 0.00 / 7 8 2996 2996 2996 2996 2996 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.00 0.600 3.66 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.83 / 2.49 / 7 8 2997 2997 2997 2997 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 7.38 / 7 0.898 74.81 / 7 7 2998 2998 2998 2998 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 7.13 / 7 0.919 76.47 / 7 7 2999 2999 2999 2999 2999 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.60 0.600 3.28 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.90 / 3.85 / 7 8 3000 3000 3000 3000 3000 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.65 0.600 3.63 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 37.38 / 0.00 / 7 8 3001 3001 3001 3001 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 193 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3001 TOP : BOTT: -- PAGE NO. 0.600 0.600 52.49 / 3.06 / 7 8 0.600 0.600 194 48.85 / 0.00 / 7 8 3002 BOTT: Longitudinal direction 3002 BOTT: Transverse direction 3002 TOP : 0.615 54.57 BOTT: 0.600 1.57 - Only minimum steel required. - Only minimum steel required. / 7 0.611 51.36 / / 8 0.600 0.00 / 7 8 3003 3003 3003 3003 3003 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 46.73 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 46.69 / 0.00 / 7 8 3004 3004 3004 3004 3004 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.54 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.14 / 0.00 / 7 8 3005 3005 3005 3005 3005 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.24 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.25 / 33.65 / 8 7 3006 3006 3006 3006 3006 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.58 0.600 1.33 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 42.16 / 41.83 / 8 7 3007 3007 3007 3007 3007 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.93 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 29.25 / 0.00 / 9 7 3008 3008 3008 3008 3008 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.90 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.76 / 0.00 / 7 7 3009 3009 3009 3009 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 194 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3009 TOP : BOTT: -- PAGE NO. 0.600 0.600 42.12 / 0.00 / 7 7 0.600 0.600 195 45.73 / 0.00 / 7 7 3010 3010 3010 3010 3010 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.93 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 44.38 / 0.00 / 7 7 3011 3011 3011 3011 3011 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.37 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 33.45 / 0.00 / 7 7 3012 3012 3012 3012 3012 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.20 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.01 / 2.74 / 7 8 3013 3013 3013 3013 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 7.69 / 7 0.838 69.90 / 7 7 3014 3014 3014 3014 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 7.71 / 7 0.835 69.67 / 7 7 3015 3015 3015 3015 3015 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.12 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.96 / 0.86 / 7 8 3016 3016 3016 3016 3016 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.00 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.03 / 0.00 / 7 8 3017 3017 3017 3017 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 195 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3017 TOP : BOTT: -- PAGE NO. 0.600 0.600 39.90 / 0.00 / 7 7 0.600 0.600 196 46.13 / 0.00 / 7 8 3018 3018 3018 3018 3018 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 39.95 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 46.38 / 0.00 / 7 8 3019 3019 3019 3019 3019 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.07 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.51 / 0.00 / 7 8 3020 3020 3020 3020 3020 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.02 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.82 / 0.77 / 7 8 3021 3021 3021 3021 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 8.15 / 7 0.866 72.19 / 7 7 3022 3022 3022 3022 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 7.88 / 7 0.892 74.29 / 7 7 3023 3023 3023 3023 3023 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 15.91 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.86 / 2.34 / 7 9 3024 3024 3024 3024 3024 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.81 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.47 / 0.00 / 7 9 3025 3025 3025 3025 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 196 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3025 TOP : BOTT: -- PAGE NO. 0.600 0.600 45.70 / 0.00 / 7 7 0.600 0.600 197 47.77 / 0.00 / 7 9 3026 3026 3026 3026 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 47.68 / 7 0.600 50.45 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 7 9 3027 3027 3027 3027 3027 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.54 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.10 / 0.00 / 7 9 3028 3028 3028 3028 3028 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.16 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.11 / 0.00 / 9 9 3029 3029 3029 3029 3029 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.34 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.12 / 34.19 / 8 7 3030 3030 3030 3030 3030 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.32 0.600 1.06 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 31.58 / 32.09 / 8 7 3031 3031 3031 3031 3031 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.20 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.70 / 0.00 / 9 7 3032 3032 3032 3032 3032 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.01 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 31.38 / 0.00 / 9 7 3033 3033 3033 3033 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 197 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3033 TOP : BOTT: -- PAGE NO. 0.600 0.600 33.47 / 0.00 / 9 7 0.600 0.600 198 36.37 / 0.00 / 7 7 3034 3034 3034 3034 3034 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 30.76 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.26 / 0.00 / 7 7 3035 3035 3035 3035 3035 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.81 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.26 / 0.00 / 7 7 3036 3036 3036 3036 3036 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.07 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.96 / 0.71 / 7 9 3037 3037 3037 3037 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 6.48 / 7 0.665 55.77 / 7 7 3038 3038 3038 3038 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 6.50 / 7 0.664 55.69 / 7 7 3039 3039 3039 3039 3039 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.87 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.85 / 0.00 / 8 7 3040 3040 3040 3040 3040 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.10 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.56 / 0.00 / 7 7 3041 3041 3041 3041 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 198 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3041 TOP : BOTT: -- PAGE NO. 0.600 0.600 28.42 / 0.00 / 7 7 0.600 0.600 199 36.73 / 0.00 / 7 7 3042 3042 3042 3042 3042 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.54 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 36.99 / 0.00 / 7 7 3043 3043 3043 3043 3043 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.36 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 28.12 / 0.00 / 7 7 3044 3044 3044 3044 3044 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.00 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.82 / 0.00 / 7 7 3045 3045 3045 3045 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 6.78 / 7 0.689 57.72 / 7 7 3046 3046 3046 3046 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 6.60 / 7 0.715 59.86 / 7 7 3047 3047 3047 3047 3047 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.68 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.98 / 0.96 / 7 9 3048 3048 3048 3048 3048 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 25.73 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 28.25 / 0.00 / 7 9 3049 3049 3049 3049 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 199 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3049 TOP : BOTT: -- PAGE NO. 0.600 0.600 33.64 / 0.00 / 7 7 0.600 0.600 200 38.44 / 0.00 / 7 9 3050 3050 3050 3050 3050 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 35.15 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.73 / 0.00 / 7 9 3051 3051 3051 3051 3051 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 30.02 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 36.35 / 0.00 / 7 9 3052 3052 3052 3052 3052 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.88 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.86 / 0.00 / 9 9 3053 3053 3053 3053 3053 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.54 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.23 / 29.17 / 8 7 3054 3054 3054 3054 3054 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.14 0.600 1.56 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.39 / 19.91 / 8 7 3055 3055 3055 3055 3055 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.18 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.47 / 0.00 / 8 7 3056 3056 3056 3056 3056 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.76 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.54 / 0.00 / 9 7 3057 3057 3057 3057 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 200 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3057 TOP : BOTT: -- PAGE NO. 0.600 0.600 43.18 / 0.00 / 8 7 0.600 0.600 201 26.89 / 0.00 / 9 7 3058 3058 3058 3058 3058 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 42.11 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.30 / 0.00 / 9 7 3059 3059 3059 3059 3059 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.17 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.00 / 0.00 / 9 7 3060 3060 3060 3060 3060 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.42 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.88 / 0.00 / 8 7 3061 3061 3061 3061 3061 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.69 0.600 4.02 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 36.85 / 8 9 3062 3062 3062 3062 3062 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.76 0.600 4.16 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 35.34 / 8 9 3063 3063 3063 3063 3063 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.20 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.99 / 0.00 / 8 9 3064 3064 3064 3064 3064 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.52 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.71 / 0.00 / 9 9 3065 3065 3065 3065 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 201 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3065 TOP : BOTT: -- PAGE NO. 0.600 0.600 40.78 / 0.00 / 8 7 0.600 0.600 202 25.42 / 0.00 / 9 9 3066 3066 3066 3066 3066 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.68 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.24 / 0.00 / 9 9 3067 3067 3067 3067 3067 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.28 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.31 / 0.00 / 9 9 3068 3068 3068 3068 3068 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.97 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.81 / 0.00 / 8 9 3069 3069 3069 3069 3069 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.75 0.600 4.09 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 34.74 / 8 7 3070 3070 3070 3070 3070 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.79 0.600 4.11 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 36.42 / 8 7 3071 3071 3071 3071 3071 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.96 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.06 / 0.00 / 8 7 3072 3072 3072 3072 3072 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.28 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.39 / 0.00 / 9 7 3073 3073 3073 3073 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 202 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3073 TOP : BOTT: -- PAGE NO. 0.600 0.600 40.92 / 0.00 / 8 7 0.600 0.600 203 22.97 / 0.00 / 9 7 3074 3074 3074 3074 3074 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 41.70 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.99 / 0.00 / 9 7 3075 3075 3075 3075 3075 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 35.95 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.07 / 0.00 / 9 7 3076 3076 3076 3076 3076 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.12 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.87 / 0.00 / 9 7 3077 3077 3077 3077 3077 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.09 0.600 1.54 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.48 / 19.87 / 8 7 3078 3078 3078 3078 3078 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.07 0.600 5.47 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.23 / 8.15 / 8 7 3079 3079 3079 3079 3079 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.84 0.600 11.69 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 10.28 / 0.00 / 8 7 3080 3080 3080 3080 3080 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 42.30 0.600 17.86 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.18 / 0.00 / 9 7 3081 BOTT: Longitudinal direction - Only minimum steel required. 3081 TOP : Transverse direction - Only minimum steel required. 3081 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 203 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3081 TOP : BOTT: -- PAGE NO. 0.618 0.600 54.85 / 21.23 / 8 7 0.600 0.600 204 17.50 / 0.00 / 9 7 3082 3082 3082 3082 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.640 56.69 BOTT: 0.600 20.85 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 17.25 / / 7 0.600 0.00 / 9 7 3083 3083 3083 3083 3083 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.58 0.600 16.75 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.77 / 0.00 / 9 7 3084 3084 3084 3084 3084 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.06 0.600 10.15 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.54 / 1.81 / 8 7 3085 3085 3085 3085 3085 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.43 0.600 5.12 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 16.36 / 8 9 3086 3086 3086 3086 3086 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.77 0.600 5.56 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 15.73 / 8 9 3087 3087 3087 3087 3087 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.99 0.600 11.14 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.10 / 1.81 / 8 7 3088 3088 3088 3088 3088 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.32 0.600 18.02 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.45 / 0.00 / 8 7 3089 BOTT: Longitudinal direction - Only minimum steel required. 3089 TOP : Transverse direction - Only minimum steel required. 3089 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 204 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3089 TOP : BOTT: -- PAGE NO. 0.674 0.600 59.67 / 22.11 / 8 7 0.600 0.600 205 17.78 / 0.00 / 9 7 3090 3090 3090 3090 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.673 59.60 BOTT: 0.600 22.05 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 17.71 / / 7 0.600 0.00 / 9 7 3091 3091 3091 3091 3091 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.10 0.600 17.84 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.30 / 0.00 / 8 7 3092 3092 3092 3092 3092 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.68 0.600 10.86 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.94 / 1.59 / 8 7 3093 3093 3093 3093 3093 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.61 0.600 5.47 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 15.12 / 8 9 3094 3094 3094 3094 3094 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.74 0.600 5.95 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 15.26 / 8 9 3095 3095 3095 3095 3095 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.88 0.600 11.89 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.69 / 2.06 / 8 7 3096 3096 3096 3096 3096 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.18 0.600 19.46 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.84 / 0.00 / 8 7 3097 BOTT: Longitudinal direction - Only minimum steel required. 3097 TOP : Transverse direction - Only minimum steel required. 3097 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 205 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3097 TOP : BOTT: -- PAGE NO. 0.669 0.600 59.28 / 24.50 / 8 7 0.600 0.600 206 16.95 / 0.00 / 9 7 3098 3098 3098 3098 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.661 58.53 BOTT: 0.600 25.60 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 17.14 / / 7 0.600 0.00 / 9 7 3099 3099 3099 3099 3099 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 46.91 0.600 22.38 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.69 / 0.00 / 8 7 3100 3100 3100 3100 3100 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 25.48 0.600 15.30 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 9.38 / 0.00 / 8 7 3101 3101 3101 3101 3101 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 5.29 0.600 7.40 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 9.00 / 8 7 3102 TOP : Longitudinal direction - Only minimum steel required. 3102 BOTT: Longitudinal direction - Only minimum steel required. 3102 TOP : 0.400 8.77 / 8 1.052 48.15 / BOTT: 0.400 2.70 / 7 0.612 28.75 / 8 7 3103 3103 3103 3103 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 3.91 / 7 0.453 21.45 / BOTT: 0.400 0.00 / 7 0.400 0.00 / 7 7 3104 3104 3104 3104 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 7.52 / 8 0.934 43.05 / BOTT: 0.400 3.71 / 7 0.400 15.21 / 8 7 3105 3105 3105 3105 3105 TOP : BOTT: TOP : BOTT: TOP : BOTT: 8 7 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.98 0.400 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 15.19 / 0.00 / 3106 TOP : Longitudinal direction - Only minimum steel required. 3106 BOTT: Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 206 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3106 BOTT: Transverse direction - Only minimum steel required. 3106 TOP : 0.400 6.82 / 8 0.868 40.16 / BOTT: 0.400 0.60 / 7 0.400 3.52 / Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.82 0.400 0.00 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 17.63 / 0.00 / 8 7 3108 3108 3108 3108 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 6.47 / 8 0.813 37.75 / BOTT: 0.400 0.00 / 7 0.400 0.00 / 8 7 3109 3109 3109 3109 3109 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 18.18 / 0.00 / 8 7 3110 3110 3110 3110 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 5.95 / 8 0.740 34.47 / BOTT: 0.400 0.00 / 7 0.400 0.00 / 8 7 3111 3111 3111 3111 3111 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 17.73 / 0.00 / 8 7 3112 3112 3112 3112 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 5.03 / 8 0.632 29.63 / BOTT: 0.400 0.00 / 7 0.400 0.00 / 8 7 3113 3113 3113 3113 3113 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 16.79 / 0.00 / 8 7 3114 3114 3114 3114 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 3.35 / 8 0.481 22.72 / BOTT: 0.400 1.47 / 9 0.400 3.00 / 8 9 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.69 0.400 0.00 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.47 0.400 0.00 / / / / / / Only Only Only Only 8 7 Only Only Only Only 8 7 Only Only Only Only 8 7 Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 8 7 3107 3107 3107 3107 3107 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.79 0.400 0.00 / / 207 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 207 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 208 3115 3115 3115 3115 3115 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.08 0.400 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 15.72 / 0.00 / 8 9 3116 3116 3116 3116 3116 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 3.25 0.400 1.13 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 18.16 / 7.71 / 8 9 3117 3117 3117 3117 3117 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.49 0.400 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 13.38 / 0.00 / 8 9 3118 3118 3118 3118 3118 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 3.25 0.400 1.13 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 18.16 / 7.71 / 7 9 3119 3119 3119 3119 3119 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.49 0.400 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 13.38 / 0.00 / 7 9 3120 3120 3120 3120 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 3.35 / 7 0.481 22.72 / BOTT: 0.400 1.47 / 9 0.400 3.00 / 7 9 3121 3121 3121 3121 3121 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 15.72 / 0.00 / 7 9 3122 3122 3122 3122 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 5.03 / 7 0.632 29.63 / BOTT: 0.400 0.00 / 9 0.400 0.00 / 7 9 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.08 0.400 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 3123 TOP : Longitudinal direction - Only minimum steel required. 3123 BOTT: Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 208 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3123 TOP : Transverse direction 3123 BOTT: Transverse direction 3123 TOP : 0.400 2.47 BOTT: 0.400 0.00 -- PAGE NO. 209 - Only minimum steel required. - Only minimum steel required. / 7 0.400 16.79 / / 9 0.400 0.00 / 7 9 3124 3124 3124 3124 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 5.95 / 7 0.740 34.47 / BOTT: 0.400 0.00 / 9 0.400 0.00 / 7 9 3125 3125 3125 3125 3125 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 17.73 / 0.00 / 7 9 3126 3126 3126 3126 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 6.47 / 7 0.813 37.75 / BOTT: 0.400 0.00 / 9 0.400 0.00 / 7 9 3127 3127 3127 3127 3127 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 18.18 / 0.00 / 7 9 3128 3128 3128 3128 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 6.82 / 7 0.868 40.16 / BOTT: 0.400 0.60 / 8 0.400 3.52 / 7 8 3129 3129 3129 3129 3129 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 17.63 / 0.00 / 7 8 3130 3130 3130 3130 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 7.52 / 7 0.934 43.05 / BOTT: 0.400 3.71 / 8 0.400 15.21 / 7 8 3131 3131 3131 3131 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.69 0.400 0.00 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.79 0.400 0.00 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.82 0.400 0.00 Longitudinal direction Longitudinal direction Transverse direction Transverse direction / / / / / / - Only Only Only Only 7 9 Only Only Only Only 7 9 Only Only Only Only 7 8 Only Only Only Only minimum steel minimum steel minimum steel minimum steel 0.400 0.400 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 minimum minimum minimum minimum C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel required. required. required. required. Page 209 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3131 TOP : BOTT: -- PAGE NO. 0.400 0.400 2.98 / 0.00 / 7 8 0.400 0.400 210 15.19 / 0.00 / 7 8 3132 TOP : Longitudinal direction - Only minimum steel required. 3132 BOTT: Longitudinal direction - Only minimum steel required. 3132 TOP : 0.400 8.77 / 7 1.052 48.15 / BOTT: 0.400 2.70 / 8 0.612 28.75 / 7 8 3133 3133 3133 3133 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 3.91 / 8 0.453 21.45 / BOTT: 0.400 0.00 / 8 0.400 0.00 / 8 8 3134 3134 3134 3134 3134 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.22 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.60 / 8 8 3135 3135 3135 3135 3135 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.29 0.400 0.12 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.23 / 1.11 / 7 8 3136 3136 3136 3136 3136 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.44 0.400 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.97 / 7 9 3137 3137 3137 3137 3137 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.45 0.400 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 11.35 / 0.64 / 8 7 3138 3138 3138 3138 3138 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.21 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.34 / 0.00 / 9 7 3139 3139 3139 3139 3139 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.51 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.04 / 1.90 / 7 9 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 210 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 211 3140 3140 3140 3140 3140 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.67 0.400 2.38 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 2.03 / 7 9 3141 3141 3141 3141 3141 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.51 0.400 2.50 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 9.76 / 3.00 / 8 7 3142 3142 3142 3142 3142 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.83 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 4.06 / 0.00 / 9 7 3143 3143 3143 3143 3143 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.34 0.400 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.65 / 0.44 / 7 9 3144 3144 3144 3144 3144 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.43 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.89 / 7 9 3145 3145 3145 3145 3145 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.28 0.400 1.71 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.79 / 1.96 / 8 7 3146 3146 3146 3146 3146 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.83 0.400 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 4.06 / 0.00 / 9 7 3147 3147 3147 3147 3147 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.34 0.400 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.65 / 0.44 / 8 9 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 211 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 212 3148 3148 3148 3148 3148 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.43 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.89 / 8 9 3149 3149 3149 3149 3149 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.28 0.400 1.71 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.79 / 1.96 / 7 8 3150 3150 3150 3150 3150 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.21 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.34 / 0.00 / 9 8 3151 3151 3151 3151 3151 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.51 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.04 / 1.90 / 8 9 3152 3152 3152 3152 3152 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.67 0.400 2.38 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 2.03 / 8 9 3153 3153 3153 3153 3153 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.51 0.400 2.50 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 9.76 / 3.00 / 7 8 3154 3154 3154 3154 3154 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.22 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.60 / 7 7 3155 3155 3155 3155 3155 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.29 0.400 0.12 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.23 / 1.11 / 8 7 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 212 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 213 3156 3156 3156 3156 3156 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.44 0.400 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.97 / 8 9 3157 3157 3157 3157 3157 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.45 0.400 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 11.35 / 0.64 / 7 8 3158 3158 3158 3158 3158 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.81 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.25 / 7 8 3159 3159 3159 3159 3159 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 5.70 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 16.69 / 7 8 3160 3160 3160 3160 3160 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 12.84 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 28.27 / 7 8 3161 3161 3161 3161 3161 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 13.61 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.51 / 34.05 / 7 8 3162 3162 3162 3162 3162 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 12.69 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.32 / 33.37 / 7 8 3163 3163 3163 3163 3163 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 9.99 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.28 / 26.36 / 7 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 213 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 214 3164 3164 3164 3164 3164 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.01 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.60 / 14.51 / 7 8 3165 3165 3165 3165 3165 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 25.25 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.21 / 3.50 / 7 8 3166 3166 3166 3166 3166 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.79 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.56 / 3.74 / 7 8 3167 3167 3167 3167 3167 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.14 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.01 / 15.43 / 7 8 3168 3168 3168 3168 3168 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 9.58 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.18 / 27.74 / 7 8 3169 3169 3169 3169 3169 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 11.69 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.33 / 34.73 / 7 8 3170 3170 3170 3170 3170 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 11.67 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.33 / 34.80 / 7 8 3171 3171 3171 3171 3171 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 9.56 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.15 / 27.89 / 7 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 214 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 215 3172 3172 3172 3172 3172 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.32 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.90 / 15.54 / 7 8 3173 3173 3173 3173 3173 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.62 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.49 / 3.88 / 7 8 3174 3174 3174 3174 3174 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.80 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.52 / 4.25 / 7 8 3175 3175 3175 3175 3175 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.40 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.96 / 17.23 / 7 8 3176 3176 3176 3176 3176 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 9.10 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.96 / 31.15 / 7 8 3177 3177 3177 3177 3177 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 11.46 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.42 / 39.85 / 7 8 3178 3178 3178 3178 3178 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 12.23 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.02 / 41.60 / 7 8 3179 3179 3179 3179 3179 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 11.53 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.67 / 35.89 / 7 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 215 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 216 3180 3180 3180 3180 3180 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 5.13 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 22.33 / 7 8 3181 3181 3181 3181 3181 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.38 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.94 / 6.37 / 7 8 3182 3182 3182 3182 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.639 56.67 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 9 0.600 1.16 / 7 9 3183 3183 3183 3183 3183 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 0.00 / 33.86 / 7 9 3184 3184 3184 3184 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 36.68 / 9 0.683 57.24 / 7 9 3185 3185 3185 3185 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 42.53 / 9 0.805 67.25 / 7 9 3186 3186 3186 3186 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 41.37 / 9 0.793 66.25 / 7 9 3187 3187 3187 3187 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 33.18 / 9 0.654 54.86 / 7 9 3188 3188 3188 3188 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 13.67 Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only 7 9 Only Only Only Only minimum steel minimum steel minimum steel minimum steel 0.600 0.600 minimum minimum minimum minimum C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel required. required. required. required. Page 216 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3188 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 9.10 / 7 7 0.600 0.600 217 0.00 / 32.16 / 7 9 3189 3189 3189 3189 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.659 58.35 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 7 0.600 1.38 / 7 9 3190 3190 3190 3190 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.648 57.43 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 7 0.600 1.17 / 7 9 3191 3191 3191 3191 3191 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 0.00 / 30.89 / 7 9 3192 3192 3192 3192 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 32.67 / 9 0.623 52.33 / 7 9 3193 3193 3193 3193 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 40.06 / 9 0.746 62.45 / 7 9 3194 3194 3194 3194 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 40.05 / 9 0.747 62.45 / 7 9 3195 3195 3195 3195 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 32.68 / 9 0.623 52.35 / 7 9 3196 3196 3196 3196 3196 TOP : BOTT: TOP : BOTT: TOP : BOTT: 7 9 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 9.34 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 9.01 / / Only Only Only Only 9 7 Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 30.91 / 3197 BOTT: Longitudinal direction - Only minimum steel required. 3197 TOP : Transverse direction - Only minimum steel required. 3197 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 217 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3197 TOP : BOTT: -- PAGE NO. 0.645 0.600 57.13 / 0.00 / 9 7 0.600 0.600 218 0.00 / 1.18 / 7 9 3198 3198 3198 3198 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.649 57.49 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 7 0.600 1.21 / 7 7 3199 3199 3199 3199 3199 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 0.00 / 31.12 / 7 9 3200 3200 3200 3200 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 32.22 / 9 0.630 52.93 / 7 9 3201 3201 3201 3201 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 40.10 / 9 0.761 63.65 / 7 9 3202 3202 3202 3202 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 41.38 / 9 0.770 64.33 / 7 9 3203 3203 3203 3203 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 36.08 / 9 0.650 54.51 / 7 9 3204 3204 3204 3204 3204 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 14.42 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 32.77 / 7 9 3205 3205 3205 3205 3205 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 51.43 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.20 / 7 8 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 8.96 Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 3206 BOTT: Longitudinal direction - Only minimum steel required. 3206 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 218 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3206 BOTT: Transverse direction - Only minimum steel required. 3206 TOP : 0.825 72.71 / 7 0.600 3.83 / BOTT: 0.600 0.00 / 9 0.600 0.10 / Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 11.47 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 219 7 8 3207 3207 3207 3207 3207 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 0.00 / 31.05 / 7 9 3208 3208 3208 3208 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 44.83 / 9 0.701 58.70 / 7 9 3209 TOP : Longitudinal direction 3209 TOP : Transverse direction 3209 TOP : 0.600 0.00 BOTT: 0.622 55.18 - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 9 0.872 72.65 / 7 9 3210 TOP : Longitudinal direction 3210 TOP : Transverse direction 3210 TOP : 0.600 0.00 BOTT: 0.609 54.01 - Only minimum steel required. - Only minimum steel required. / 7 0.600 0.00 / / 9 0.867 72.27 / 7 9 3211 3211 3211 3211 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 41.55 / 9 0.688 57.69 / 7 9 3212 3212 3212 3212 3212 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 0.00 / 29.76 / 7 9 3213 3213 3213 3213 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.872 76.79 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 4.40 / / 7 0.600 0.00 / 9 9 3214 3214 3214 3214 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.862 75.92 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 4.55 / / 7 0.600 0.00 / 9 9 3215 3215 3215 3215 TOP : BOTT: TOP : BOTT: - Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.14 0.600 7.44 Longitudinal direction Longitudinal direction Transverse direction Transverse direction / / Only Only Only Only 8 7 Only Only Only Only minimum steel minimum steel minimum steel minimum steel 0.600 0.600 minimum minimum minimum minimum C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel required. required. required. required. Page 219 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3215 TOP : BOTT: -- PAGE NO. 0.600 0.600 1.51 / 7.76 / 0.00 / 28.76 / 9 9 3216 3216 3216 3216 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 40.93 / 9 0.665 55.81 / 9 9 3217 3217 3217 3217 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 52.51 / 9 0.835 69.68 / 9 9 3218 3218 3218 3218 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 52.51 / 9 0.836 69.70 / 9 9 3219 3219 3219 3219 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 40.97 / 9 0.666 55.87 / 9 9 3220 3220 3220 3220 3220 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 0.00 / 28.82 / 9 9 3221 3221 3221 3221 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.858 75.57 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 4.50 / / 7 0.600 0.00 / 9 9 3222 3222 3222 3222 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.864 76.12 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 4.38 / / 7 0.600 0.00 / 9 9 3223 3223 3223 3223 3223 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / 9 7 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.83 0.600 7.18 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.26 0.600 7.21 / / 8 7 Only Only Only Only 8 7 Only Only Only Only 8 7 0.600 0.600 220 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 29.47 / 3224 TOP : Longitudinal direction - Only minimum steel required. 3224 BOTT: Longitudinal direction - Only minimum steel required. 3224 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 220 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3224 TOP : BOTT: 3225 3225 3225 3225 -- PAGE NO. 0.600 0.600 0.00 / 40.52 / 0.00 / 57.10 / 9 9 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 52.72 / 9 0.858 71.55 / 9 9 3226 TOP : Longitudinal direction 3226 TOP : Transverse direction 3226 TOP : 0.600 0.00 BOTT: 0.612 54.34 8 9 0.600 0.681 221 - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.862 71.88 / 9 9 3227 3227 3227 3227 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 45.46 / 9 0.690 57.82 / 9 9 3228 3228 3228 3228 3228 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 0.00 / 29.47 / 9 9 3229 3229 3229 3229 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.777 68.63 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 5.37 / / 9 0.600 0.00 / 7 9 3230 3230 3230 3230 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.772 68.14 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 6.15 / / 9 0.600 0.56 / 7 8 3231 3231 3231 3231 3231 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 6.17 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 19.82 / 7 9 3232 3232 3232 3232 3232 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 39.65 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 40.80 / 7 9 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 14.09 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 3233 TOP : Longitudinal direction - Only minimum steel required. 3233 BOTT: Longitudinal direction - Only minimum steel required. 3233 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 221 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3233 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 51.19 / 7 9 0.600 0.628 222 0.00 / 52.77 / 7 9 3234 3234 3234 3234 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 50.12 / 9 0.626 52.56 / 7 9 3235 3235 3235 3235 3235 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 36.82 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 40.00 / 7 9 3236 3236 3236 3236 3236 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.57 0.600 2.78 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.16 / 18.35 / 8 7 3237 3237 3237 3237 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.812 71.65 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 7.37 / / 7 0.600 0.00 / 9 7 3238 3238 3238 3238 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.807 71.17 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 7.51 / / 7 0.600 0.00 / 9 7 3239 3239 3239 3239 3239 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.16 0.600 3.11 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.46 / 17.80 / 8 7 3240 3240 3240 3240 3240 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 36.27 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 38.94 / 8 7 3241 3241 3241 3241 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 48.78 / 9 0.606 50.91 / 8 7 3242 TOP : Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 222 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 223 3242 BOTT: Longitudinal direction 3242 TOP : Transverse direction 3242 TOP : 0.600 0.00 BOTT: 0.600 48.76 - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.606 50.88 / 8 9 3243 3243 3243 3243 3243 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 36.29 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 38.76 / 8 9 3244 3244 3244 3244 3244 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.24 0.600 2.34 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 17.43 / 8 7 3245 3245 3245 3245 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.802 70.79 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 7.46 / / 7 0.600 0.00 / 9 7 3246 3246 3246 3246 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.809 71.37 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 7.31 / / 7 0.600 0.00 / 9 7 3247 3247 3247 3247 3247 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.71 0.600 2.42 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.40 / 18.66 / 8 7 3248 3248 3248 3248 3248 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 35.77 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 40.57 / 8 7 3249 3249 3249 3249 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 48.74 / 9 0.634 53.23 / 8 7 3250 TOP : Longitudinal direction - Only minimum steel required. 3250 BOTT: Longitudinal direction - Only minimum steel required. 3250 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 223 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3250 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 50.38 / 8 9 0.600 0.638 224 0.00 / 53.52 / 8 9 3251 3251 3251 3251 3251 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 41.07 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 41.48 / 8 9 3252 3252 3252 3252 3252 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.95 0.600 10.88 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.82 / 19.74 / 8 9 3253 3253 3253 3253 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.643 57.01 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 5.03 / / 9 0.600 0.00 / 9 9 3254 3254 3254 3254 3254 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 51.46 0.600 2.41 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.71 / 0.69 / 7 8 3255 3255 3255 3255 3255 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.89 0.600 3.90 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 8.12 / 7 9 3256 3256 3256 3256 3256 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 29.23 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 20.12 / 7 9 3257 3257 3257 3257 3257 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 34.70 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 27.14 / 7 9 3258 3258 3258 3258 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 224 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3258 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 33.48 / 7 9 0.600 0.600 225 0.00 / 27.29 / 7 7 3259 3259 3259 3259 3259 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 26.50 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.08 / 20.14 / 8 7 3260 3260 3260 3260 3260 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.54 0.600 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.68 / 7.54 / 8 7 3261 3261 3261 3261 3261 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 50.34 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.93 / 0.00 / 9 7 3262 3262 3262 3262 3262 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 50.42 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.09 / 0.00 / 9 7 3263 3263 3263 3263 3263 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.26 0.600 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.93 / 7.24 / 8 7 3264 3264 3264 3264 3264 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 26.18 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.55 / 19.57 / 8 7 3265 3265 3265 3265 3265 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 32.66 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.23 / 26.59 / 8 7 3266 3266 3266 3266 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 225 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3266 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 32.56 / 8 9 0.600 0.600 226 0.00 / 26.29 / 8 7 3267 3267 3267 3267 3267 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 26.15 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 19.12 / 8 7 3268 3268 3268 3268 3268 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.50 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.55 / 6.88 / 8 7 3269 3269 3269 3269 3269 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 49.95 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.02 / 0.00 / 9 7 3270 3270 3270 3270 3270 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 50.38 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.89 / 0.00 / 9 7 3271 3271 3271 3271 3271 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.01 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.98 / 7.91 / 8 7 3272 3272 3272 3272 3272 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 25.54 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.67 / 21.08 / 8 7 3273 3273 3273 3273 3273 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 31.57 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.44 / 28.77 / 8 7 3274 3274 3274 3274 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 226 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3274 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 33.05 / 9 9 0.600 0.600 227 0.10 / 28.84 / 8 9 3275 3275 3275 3275 3275 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 31.01 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.36 / 22.11 / 8 9 3276 3276 3276 3276 3276 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.24 0.600 8.98 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.93 / 10.98 / 8 9 3277 3277 3277 3277 3277 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.32 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.55 / 0.00 / 8 9 3278 3278 3278 3278 3278 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.33 0.600 3.43 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.45 / 0.36 / 7 8 3279 3279 3279 3279 3279 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.82 0.600 4.21 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 1.87 / 7 9 3280 3280 3280 3280 3280 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 21.01 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.01 / 7 9 3281 3281 3281 3281 3281 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 15.82 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 14.25 / 7 7 3282 3282 3282 3282 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 227 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3282 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 12.13 / 7 9 0.600 0.600 228 0.13 / 13.90 / 8 7 3283 3283 3283 3283 3283 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 18.11 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.19 / 2.01 / 8 7 3284 3284 3284 3284 3284 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.17 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.11 / 2.14 / 8 7 3285 3285 3285 3285 3285 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.35 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.18 / 0.00 / 9 7 3286 3286 3286 3286 3286 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.94 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.32 / 0.00 / 9 7 3287 3287 3287 3287 3287 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.51 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.17 / 2.05 / 8 7 3288 3288 3288 3288 3288 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 18.04 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.32 / 1.96 / 8 7 3289 3289 3289 3289 3289 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 13.44 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 13.29 / 8 7 3290 3290 3290 3290 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 228 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3290 TOP : BOTT: -- PAGE NO. 0.600 0.600 1.18 / 13.86 / 8 7 0.600 0.600 229 0.03 / 13.66 / 8 7 3291 3291 3291 3291 3291 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 18.30 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.25 / 1.89 / 8 7 3292 3292 3292 3292 3292 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.28 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 1.95 / 8 7 3293 3293 3293 3293 3293 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.32 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.24 / 0.00 / 9 7 3294 3294 3294 3294 3294 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.56 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.20 / 0.00 / 9 7 3295 3295 3295 3295 3295 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.66 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.16 / 2.26 / 8 7 3296 3296 3296 3296 3296 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 17.32 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.33 / 2.17 / 8 7 3297 3297 3297 3297 3297 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 11.68 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 15.33 / 8 9 3298 3298 3298 3298 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 229 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3298 TOP : BOTT: -- PAGE NO. 0.600 0.600 0.00 / 11.80 / 9 7 0.600 0.600 230 0.46 / 15.86 / 8 7 3299 3299 3299 3299 3299 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 23.04 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.37 / 2.69 / 8 7 3300 3300 3300 3300 3300 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.16 0.600 9.45 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 2.93 / 8 9 3301 3301 3301 3301 3301 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.10 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.68 / 8 9 3302 3302 3302 3302 3302 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.55 0.600 14.55 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 11.61 / 11.61 / 8 7 3303 3303 3303 3303 3303 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.53 0.600 4.53 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 34.77 / 34.77 / 8 7 3304 TOP : Longitudinal direction - Only minimum steel required. 3304 BOTT: Longitudinal direction - Only minimum steel required. 3304 TOP : 0.600 6.47 / 8 0.750 62.71 / BOTT: 0.600 6.47 / 7 0.750 62.71 / 8 7 3305 TOP : Longitudinal direction - Only minimum steel required. 3305 BOTT: Longitudinal direction - Only minimum steel required. 3305 TOP : 0.600 8.99 / 8 0.938 78.04 / BOTT: 0.600 8.99 / 7 0.938 78.04 / 8 7 3306 TOP : Longitudinal direction - Only minimum steel required. 3306 BOTT: Longitudinal direction - Only minimum steel required. 3306 TOP : 0.600 9.38 / 8 0.946 78.67 / BOTT: 0.600 9.38 / 7 0.946 78.67 / 8 7 3307 TOP : Longitudinal direction - Only minimum steel required. 3307 BOTT: Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 230 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3307 TOP : BOTT: -- PAGE NO. 0.600 0.600 7.21 / 7.21 / 8 7 0.775 0.775 231 64.78 / 64.78 / 8 7 3308 3308 3308 3308 3308 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.51 0.600 4.51 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.40 / 38.40 / 8 7 3309 3309 3309 3309 3309 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.39 0.600 12.39 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.89 / 13.89 / 8 7 3310 3310 3310 3310 3310 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.38 0.600 12.38 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.83 / 13.83 / 8 7 3311 3311 3311 3311 3311 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.53 0.600 4.53 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.30 / 38.30 / 8 7 3312 TOP : Longitudinal direction - Only minimum steel required. 3312 BOTT: Longitudinal direction - Only minimum steel required. 3312 TOP : 0.600 7.33 / 8 0.776 64.82 / BOTT: 0.600 7.33 / 7 0.776 64.82 / 8 7 3313 TOP : Longitudinal direction - Only minimum steel required. 3313 BOTT: Longitudinal direction - Only minimum steel required. 3313 TOP : 0.600 9.74 / 8 0.951 79.03 / BOTT: 0.600 9.74 / 7 0.951 79.03 / 8 7 3314 TOP : Longitudinal direction - Only minimum steel required. 3314 BOTT: Longitudinal direction - Only minimum steel required. 3314 TOP : 0.600 9.74 / 8 0.952 79.09 / BOTT: 0.600 9.74 / 7 0.952 79.09 / 8 7 3315 TOP : Longitudinal direction - Only minimum steel required. 3315 BOTT: Longitudinal direction - Only minimum steel required. 3315 TOP : 0.600 7.31 / 8 0.777 64.96 / BOTT: 0.600 7.31 / 7 0.777 64.96 / 8 7 3316 3316 3316 3316 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel required. required. required. required. Page 231 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3316 TOP : BOTT: -- PAGE NO. 0.600 0.600 4.42 / 4.42 / 8 7 0.600 0.600 232 38.42 / 38.42 / 8 7 3317 3317 3317 3317 3317 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.11 0.600 12.11 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.85 / 13.85 / 8 7 3318 3318 3318 3318 3318 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.50 0.600 12.50 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.18 / 14.18 / 8 7 3319 3319 3319 3319 3319 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.91 0.600 4.91 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 39.56 / 39.56 / 8 7 3320 TOP : Longitudinal direction - Only minimum steel required. 3320 BOTT: Longitudinal direction - Only minimum steel required. 3320 TOP : 0.600 7.95 / 8 0.807 67.39 / BOTT: 0.600 7.95 / 7 0.807 67.39 / 8 7 3321 TOP : Longitudinal direction - Only minimum steel required. 3321 BOTT: Longitudinal direction - Only minimum steel required. 3321 TOP : 0.600 10.53 / 8 1.002 83.12 / BOTT: 0.600 10.53 / 7 1.002 83.12 / 8 7 3322 TOP : Longitudinal direction - Only minimum steel required. 3322 BOTT: Longitudinal direction - Only minimum steel required. 3322 TOP : 0.600 10.49 / 8 1.021 84.65 / BOTT: 0.600 10.49 / 7 1.021 84.65 / 8 7 3323 TOP : Longitudinal direction - Only minimum steel required. 3323 BOTT: Longitudinal direction - Only minimum steel required. 3323 TOP : 0.600 7.91 / 8 0.856 71.39 / BOTT: 0.600 7.91 / 7 0.856 71.39 / 8 7 3324 3324 3324 3324 3324 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.66 0.600 4.66 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 43.73 / 43.73 / 3325 3325 3325 3325 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel 8 7 Page 232 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3325 TOP : BOTT: -- PAGE NO. 0.600 0.600 11.08 / 11.08 / 8 7 0.600 0.600 233 15.69 / 15.69 / 8 7 3326 3326 3326 3326 3326 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 43.51 0.600 43.51 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.97 / 4.97 / 8 7 3327 3327 3327 3327 3327 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.12 0.600 6.12 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 10.45 / 10.45 / 7 8 3328 3328 3328 3328 3328 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.74 0.600 18.74 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.39 / 19.39 / 7 8 3329 3329 3329 3329 3329 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.14 0.600 20.14 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.90 / 23.90 / 7 8 3330 3330 3330 3330 3330 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.48 0.600 19.48 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 24.89 / 24.89 / 7 8 3331 3331 3331 3331 3331 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.53 0.600 17.53 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.78 / 22.78 / 7 8 3332 3332 3332 3332 3332 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.20 0.600 7.20 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.83 / 14.83 / 7 8 3333 3333 3333 3333 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 233 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3333 TOP : BOTT: -- PAGE NO. 0.600 0.600 33.70 / 33.70 / 8 7 0.600 0.600 234 0.87 / 0.87 / 8 7 3334 3334 3334 3334 3334 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.74 0.600 33.74 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.83 / 0.83 / 8 7 3335 3335 3335 3335 3335 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.12 0.600 7.12 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.98 / 14.98 / 7 8 3336 3336 3336 3336 3336 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.27 0.600 17.27 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.11 / 23.11 / 7 8 3337 3337 3337 3337 3337 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.81 0.600 18.81 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.67 / 25.67 / 7 8 3338 3338 3338 3338 3338 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.84 0.600 18.84 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.70 / 25.70 / 7 8 3339 3339 3339 3339 3339 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.42 0.600 17.42 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.17 / 23.17 / 7 8 3340 3340 3340 3340 3340 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.52 0.600 7.52 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.06 / 15.06 / 7 8 3341 3341 3341 3341 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 234 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3341 TOP : BOTT: -- PAGE NO. 0.600 0.600 33.02 / 33.02 / 8 7 0.600 0.600 235 0.72 / 0.72 / 8 7 3342 3342 3342 3342 3342 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.23 0.600 34.23 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.08 / 1.08 / 8 7 3343 3343 3343 3343 3343 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.42 0.600 6.42 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.34 / 14.34 / 7 8 3344 3344 3344 3344 3344 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 16.51 0.600 16.51 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.03 / 22.03 / 7 8 3345 3345 3345 3345 3345 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.25 0.600 18.25 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 24.11 / 24.11 / 7 8 3346 3346 3346 3346 3346 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.10 0.600 19.10 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.55 / 23.55 / 7 8 3347 3347 3347 3347 3347 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.17 0.600 19.17 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.18 / 20.18 / 7 8 3348 3348 3348 3348 3348 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.86 0.600 10.86 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 12.43 / 12.43 / 7 8 3349 3349 3349 3349 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 235 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3349 TOP : BOTT: -- PAGE NO. 0.600 0.600 30.18 / 30.18 / 8 7 0.600 0.600 236 1.98 / 1.98 / 8 7 3350 TOP : Transverse direction 3350 BOTT: Transverse direction 3350 TOP : 0.802 70.75 BOTT: 0.802 70.75 - Only minimum steel required. - Only minimum steel required. / 8 0.600 21.09 / / 7 0.600 21.09 / 8 7 3351 3351 3351 3351 3351 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.65 0.600 7.65 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 9.20 / 9.20 / 7 8 3352 3352 3352 3352 3352 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.36 0.600 31.36 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.65 / 38.65 / 7 8 3353 TOP : Longitudinal direction - Only minimum steel required. 3353 BOTT: Longitudinal direction - Only minimum steel required. 3353 TOP : 0.600 35.47 / 7 0.615 51.69 / BOTT: 0.600 35.47 / 8 0.615 51.69 / 7 8 3354 TOP : Longitudinal direction - Only minimum steel required. 3354 BOTT: Longitudinal direction - Only minimum steel required. 3354 TOP : 0.600 34.76 / 7 0.635 53.28 / BOTT: 0.600 34.76 / 8 0.635 53.28 / 7 8 3355 3355 3355 3355 3355 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.14 0.600 29.14 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 43.98 / 43.98 / 7 8 3356 3356 3356 3356 3356 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.19 0.600 8.19 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.78 / 23.78 / 7 8 3357 3357 3357 3357 3357 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 52.60 0.600 52.60 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.61 / 2.61 / 8 7 3358 TOP : Longitudinal direction - Only minimum steel required. 3358 BOTT: Longitudinal direction - Only minimum steel required. 3358 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 236 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3358 BOTT: Transverse direction - Only minimum steel required. 3358 TOP : 0.600 52.70 / 8 0.600 2.57 / BOTT: 0.600 52.70 / 7 0.600 2.57 / 237 8 7 3359 3359 3359 3359 3359 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.12 0.600 8.12 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.98 / 23.98 / 7 8 3360 3360 3360 3360 3360 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.96 0.600 28.96 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 44.51 / 44.51 / 7 8 3361 TOP : Longitudinal direction - Only minimum steel required. 3361 BOTT: Longitudinal direction - Only minimum steel required. 3361 TOP : 0.600 34.19 / 7 0.650 54.53 / BOTT: 0.600 34.19 / 8 0.650 54.53 / 7 8 3362 TOP : Longitudinal direction - Only minimum steel required. 3362 BOTT: Longitudinal direction - Only minimum steel required. 3362 TOP : 0.600 34.22 / 7 0.651 54.63 / BOTT: 0.600 34.22 / 8 0.651 54.63 / 7 8 3363 3363 3363 3363 3363 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.21 0.600 29.21 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 44.75 / 44.75 / 7 8 3364 3364 3364 3364 3364 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.83 0.600 8.83 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 24.23 / 24.23 / 7 8 3365 3365 3365 3365 3365 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 51.48 0.600 51.48 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.34 / 2.34 / 8 7 - Only minimum steel required. - Only minimum steel required. / 8 0.600 2.74 / / 7 0.600 2.74 / 8 7 3366 TOP : Transverse direction 3366 BOTT: Transverse direction 3366 TOP : 0.607 53.83 BOTT: 0.607 53.83 3367 TOP : Longitudinal direction - Only minimum steel required. 3367 BOTT: Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 237 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 238 3367 TOP : Transverse direction 3367 BOTT: Transverse direction 3367 TOP : 0.600 7.04 BOTT: 0.600 7.04 - Only minimum steel required. - Only minimum steel required. / 7 0.600 23.95 / / 8 0.600 23.95 / 7 8 3368 3368 3368 3368 3368 / / required. required. required. required. 44.78 / 44.78 / 7 8 3369 TOP : Longitudinal direction - Only minimum steel required. 3369 BOTT: Longitudinal direction - Only minimum steel required. 3369 TOP : 0.600 33.56 / 7 0.658 55.20 / BOTT: 0.600 33.56 / 8 0.658 55.20 / 7 8 3370 TOP : Longitudinal direction - Only minimum steel required. 3370 BOTT: Longitudinal direction - Only minimum steel required. 3370 TOP : 0.600 35.06 / 7 0.662 55.51 / BOTT: 0.600 35.06 / 8 0.662 55.51 / 7 8 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 27.92 0.600 27.92 Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 3371 3371 3371 3371 3371 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.46 0.600 33.46 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.26 / 45.26 / 7 8 3372 3372 3372 3372 3372 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.14 0.600 17.14 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.84 / 20.84 / 7 8 3373 3373 3373 3373 3373 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.26 0.600 47.26 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.13 / 8.13 / 8 7 3374 3374 3374 3374 3374 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 53.06 0.600 53.06 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.77 / 18.77 / 8 7 3375 3375 3375 3375 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 238 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3375 TOP : BOTT: -- PAGE NO. 0.600 0.600 6.82 / 6.82 / 7 8 0.600 0.600 239 11.57 / 11.57 / 7 8 3376 3376 3376 3376 3376 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.35 0.600 29.35 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 33.00 / 33.00 / 7 8 3377 3377 3377 3377 3377 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 35.18 0.600 35.18 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 44.73 / 44.73 / 7 8 3378 3378 3378 3378 3378 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.85 0.600 34.85 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.34 / 45.34 / 7 8 3379 3379 3379 3379 3379 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 27.83 0.600 27.83 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.11 / 35.11 / 7 8 3380 3380 3380 3380 3380 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.07 0.600 4.07 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 16.74 / 16.74 / 7 8 3381 TOP : Transverse direction 3381 BOTT: Transverse direction 3381 TOP : 0.604 53.61 BOTT: 0.604 53.61 - Only minimum steel required. - Only minimum steel required. / 8 0.600 4.93 / / 7 0.600 4.93 / 8 7 3382 TOP : Transverse direction 3382 BOTT: Transverse direction 3382 TOP : 0.606 53.76 BOTT: 0.606 53.76 - Only minimum steel required. - Only minimum steel required. / 8 0.600 4.92 / / 7 0.600 4.92 / 8 7 3383 3383 3383 3383 3383 / / 7 8 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.13 0.600 4.13 Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 16.88 / 16.88 / 3384 TOP : Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 239 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 240 3384 3384 3384 3384 BOTT: Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 28.02 BOTT: 0.600 28.02 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 7 0.600 35.41 / / 8 0.600 35.41 / 7 8 3385 3385 3385 3385 3385 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 35.01 0.600 35.01 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.97 / 45.97 / 7 8 3386 3386 3386 3386 3386 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.88 0.600 34.88 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 46.14 / 46.14 / 7 8 3387 3387 3387 3387 3387 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.12 0.600 28.12 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.83 / 35.83 / 7 8 3388 3388 3388 3388 3388 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 5.10 0.600 5.10 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.31 / 17.31 / 7 8 3389 3389 3389 3389 3389 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 51.83 0.600 51.83 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.54 / 4.54 / 8 7 3390 TOP : Transverse direction 3390 BOTT: Transverse direction 3390 TOP : 0.625 55.39 BOTT: 0.625 55.39 - Only minimum steel required. - Only minimum steel required. / 8 0.600 5.06 / / 7 0.600 5.06 / 8 7 3391 3391 3391 3391 3391 / / 7 8 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.78 0.600 2.78 Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.20 / 17.20 / 3392 TOP : Longitudinal direction - Only minimum steel required. 3392 BOTT: Longitudinal direction - Only minimum steel required. 3392 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 240 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3392 BOTT: Transverse direction - Only minimum steel required. 3392 TOP : 0.600 26.77 / 7 0.600 36.57 / BOTT: 0.600 26.77 / 8 0.600 36.57 / 241 7 8 3393 3393 3393 3393 3393 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.02 0.600 34.02 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 48.37 / 48.37 / 7 8 3394 3394 3394 3394 3394 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 35.46 0.600 35.46 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 49.83 / 49.83 / 7 8 3395 3395 3395 3395 3395 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.12 0.600 33.12 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.81 / 40.81 / 7 8 3396 3396 3396 3396 3396 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.86 0.600 17.86 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.34 / 23.34 / 7 8 3397 3397 3397 3397 3397 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.85 0.600 23.85 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.43 / 0.43 / 8 7 3398 3398 3398 3398 3398 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 15.93 0.600 15.93 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.28 / 15.28 / 7 8 3399 3399 3399 3399 3399 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.01 0.600 6.01 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 16.95 / 16.95 / 7 8 3400 TOP : Longitudinal direction - Only minimum steel required. 3400 BOTT: Longitudinal direction - Only minimum steel required. 3400 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 241 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3400 BOTT: Transverse direction - Only minimum steel required. 3400 TOP : 0.600 21.10 / 7 0.600 20.48 / BOTT: 0.600 21.10 / 8 0.600 20.48 / 242 7 8 3401 3401 3401 3401 3401 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 21.54 0.600 21.54 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.49 / 25.49 / 7 8 3402 3402 3402 3402 3402 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 21.95 0.600 21.95 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 24.38 / 24.38 / 7 8 3403 3403 3403 3403 3403 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.53 0.600 20.53 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.79 / 17.79 / 7 8 3404 3404 3404 3404 3404 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.07 0.600 0.07 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.93 / 6.93 / 7 8 3405 3405 3405 3405 3405 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.09 0.600 40.09 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.55 / 4.55 / 8 7 3406 3406 3406 3406 3406 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 40.24 0.600 40.24 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.57 / 4.57 / 8 7 3407 3407 3407 3407 3407 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.28 0.600 0.28 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.96 / 6.96 / 7 8 3408 TOP : Longitudinal direction - Only minimum steel required. 3408 BOTT: Longitudinal direction - Only minimum steel required. 3408 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 242 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3408 BOTT: Transverse direction - Only minimum steel required. 3408 TOP : 0.600 21.18 / 7 0.600 17.76 / BOTT: 0.600 21.18 / 8 0.600 17.76 / 243 7 8 3409 3409 3409 3409 3409 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.43 0.600 23.43 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 24.18 / 24.18 / 7 8 3410 3410 3410 3410 3410 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.84 0.600 22.84 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 24.65 / 24.65 / 7 8 3411 3411 3411 3411 3411 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.88 0.600 20.88 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.44 / 18.44 / 7 8 3412 3412 3412 3412 3412 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.50 0.600 1.50 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.44 / 7.44 / 7 8 3413 3413 3413 3413 3413 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 37.24 0.600 37.24 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.95 / 3.95 / 8 7 3414 3414 3414 3414 3414 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 42.01 0.600 42.01 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.69 / 4.69 / 8 7 3415 3415 3415 3415 3415 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.06 0.600 1.06 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.38 / 7.38 / 7 8 3416 TOP : Longitudinal direction - Only minimum steel required. 3416 BOTT: Longitudinal direction - Only minimum steel required. 3416 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 243 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3416 BOTT: Transverse direction - Only minimum steel required. 3416 TOP : 0.600 20.06 / 7 0.600 18.92 / BOTT: 0.600 20.06 / 8 0.600 18.92 / 244 7 8 3417 3417 3417 3417 3417 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 21.51 0.600 21.51 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.69 / 26.69 / 7 8 3418 3418 3418 3418 3418 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.02 0.600 22.02 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 29.53 / 29.53 / 7 8 3419 3419 3419 3419 3419 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.28 0.600 26.28 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 25.69 / 25.69 / 7 8 3420 3420 3420 3420 3420 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.40 0.600 17.40 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 21.03 / 21.03 / 7 8 3421 3421 3421 3421 3421 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.26 0.600 4.26 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.73 / 18.73 / 7 8 3422 3422 3422 3422 3422 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 5.62 0.600 5.62 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.46 / 6.46 / 7 8 3423 3423 3423 3423 3423 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.78 0.600 6.78 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.44 / 4.44 / 7 8 3424 TOP : Longitudinal direction - Only minimum steel required. 3424 BOTT: Longitudinal direction - Only minimum steel required. 3424 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 244 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3424 BOTT: Transverse direction - Only minimum steel required. 3424 TOP : 0.600 15.08 / 7 0.600 3.71 / BOTT: 0.600 15.08 / 8 0.600 3.71 / 245 7 8 3425 3425 3425 3425 3425 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.51 0.600 0.51 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.17 / 8.17 / 7 8 3426 3426 3426 3426 3426 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.67 0.600 7.67 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.89 / 8.89 / 7 8 3427 3427 3427 3427 3427 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.01 0.600 14.01 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.13 / 2.13 / 7 8 3428 3428 3428 3428 3428 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.44 0.600 1.44 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.64 / 1.64 / 7 8 3429 3429 3429 3429 3429 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.03 0.600 23.03 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.62 / 1.62 / 8 7 3430 3430 3430 3430 3430 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.18 0.600 23.18 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.65 / 1.65 / 8 7 3431 3431 3431 3431 3431 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.14 0.600 1.14 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.64 / 1.64 / 7 8 3432 TOP : Longitudinal direction - Only minimum steel required. 3432 BOTT: Longitudinal direction - Only minimum steel required. 3432 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 245 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3432 BOTT: Transverse direction - Only minimum steel required. 3432 TOP : 0.600 14.96 / 7 0.600 2.19 / BOTT: 0.600 14.96 / 8 0.600 2.19 / 246 7 8 3433 3433 3433 3433 3433 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.57 0.600 9.57 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.74 / 7.74 / 7 8 3434 3434 3434 3434 3434 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.55 0.600 4.55 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.12 / 7.12 / 7 8 3435 3435 3435 3435 3435 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.12 0.600 14.12 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.28 / 2.28 / 7 8 3436 3436 3436 3436 3436 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.37 0.600 0.37 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.81 / 1.81 / 7 8 3437 3437 3437 3437 3437 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.10 0.600 19.10 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.06 / 1.06 / 8 7 3438 3438 3438 3438 3438 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 24.76 0.600 24.76 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.77 / 1.77 / 8 7 3439 3439 3439 3439 3439 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.39 0.600 2.39 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.82 / 1.82 / 7 8 3440 TOP : Longitudinal direction - Only minimum steel required. 3440 BOTT: Longitudinal direction - Only minimum steel required. 3440 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 246 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3440 BOTT: Transverse direction - Only minimum steel required. 3440 TOP : 0.600 14.20 / 7 0.600 2.50 / BOTT: 0.600 14.20 / 8 0.600 2.50 / 247 7 8 3441 3441 3441 3441 3441 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.32 0.600 10.32 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 10.35 / 10.35 / 7 8 3442 3442 3442 3442 3442 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.57 0.600 2.57 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.87 / 8.87 / 7 8 3443 3443 3443 3443 3443 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 20.62 0.600 20.62 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.70 / 4.70 / 7 8 3444 3444 3444 3444 3444 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.54 0.600 18.54 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.18 / 5.18 / 7 8 3445 3445 3445 3445 3445 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 5.62 0.600 5.62 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.77 / 6.77 / 7 8 3446 3446 3446 3446 3446 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 24.81 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.25 / 0.00 / 7 8 3447 3447 3447 3447 3447 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 5.70 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 16.69 / 0.00 / 7 8 3448 TOP : Longitudinal direction - Only minimum steel required. 3448 BOTT: Longitudinal direction - Only minimum steel required. 3448 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 247 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3448 BOTT: Transverse direction - Only minimum steel required. 3448 TOP : 0.600 12.84 / 9 0.600 28.27 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 248 7 8 3449 3449 3449 3449 3449 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.61 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 34.05 / 0.51 / 7 8 3450 3450 3450 3450 3450 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.69 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 33.37 / 3.32 / 7 8 3451 3451 3451 3451 3451 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.99 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.36 / 3.28 / 7 8 3452 3452 3452 3452 3452 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.01 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.51 / 2.60 / 7 8 3453 3453 3453 3453 3453 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 25.25 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.50 / 5.21 / 7 8 3454 3454 3454 3454 3454 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 24.79 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.74 / 5.56 / 7 8 3455 3455 3455 3455 3455 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.14 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.43 / 4.01 / 7 8 3456 TOP : Longitudinal direction - Only minimum steel required. 3456 BOTT: Longitudinal direction - Only minimum steel required. 3456 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 248 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3456 BOTT: Transverse direction - Only minimum steel required. 3456 TOP : 0.600 9.58 / 9 0.600 27.74 / BOTT: 0.600 0.00 / 9 0.600 6.18 / 249 7 8 3457 3457 3457 3457 3457 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.69 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 34.73 / 8.33 / 7 8 3458 3458 3458 3458 3458 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.67 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 34.80 / 8.33 / 7 8 3459 3459 3459 3459 3459 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.56 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.89 / 6.15 / 7 8 3460 3460 3460 3460 3460 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.32 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.54 / 3.90 / 7 8 3461 3461 3461 3461 3461 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 24.62 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.88 / 5.49 / 7 8 3462 3462 3462 3462 3462 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 24.80 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.25 / 5.52 / 7 8 3463 3463 3463 3463 3463 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.40 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.23 / 3.96 / 7 8 3464 TOP : Longitudinal direction - Only minimum steel required. 3464 BOTT: Longitudinal direction - Only minimum steel required. 3464 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 249 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3464 BOTT: Transverse direction - Only minimum steel required. 3464 TOP : 0.600 9.10 / 9 0.600 31.15 / BOTT: 0.600 0.00 / 9 0.600 5.96 / 250 7 8 3465 3465 3465 3465 3465 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.46 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 39.85 / 7.42 / 7 8 3466 3466 3466 3466 3466 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.23 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 41.60 / 6.02 / 7 8 3467 3467 3467 3467 3467 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.53 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 35.89 / 1.67 / 7 8 3468 3468 3468 3468 3468 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 5.13 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.33 / 0.00 / 7 8 3469 3469 3469 3469 3469 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 22.38 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.37 / 1.94 / 7 8 3470 3470 3470 3470 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.639 56.67 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 1.16 / / 8 0.600 0.00 / 9 8 3471 3471 3471 3471 3471 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / 9 8 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.67 0.600 0.00 Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 33.86 / 0.00 / 3472 TOP : Longitudinal direction - Only minimum steel required. 3472 BOTT: Longitudinal direction - Only minimum steel required. 3472 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 250 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3472 TOP : BOTT: -- PAGE NO. 0.600 0.600 36.68 / 0.00 / 57.24 / 0.00 / 9 8 3473 3473 3473 3473 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 42.53 / 9 0.805 67.25 / BOTT: 0.600 0.00 / 8 0.600 0.00 / 9 8 3474 3474 3474 3474 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 41.37 / 9 0.793 66.25 / BOTT: 0.600 0.00 / 8 0.600 0.00 / 9 8 3475 3475 3475 3475 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 33.18 / 9 0.654 54.86 / BOTT: 0.600 0.00 / 8 0.600 0.00 / 9 8 3476 3476 3476 3476 3476 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 32.16 / 0.00 / 9 8 3477 3477 3477 3477 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.659 58.35 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 1.38 / / 9 0.600 0.00 / 9 8 3478 3478 3478 3478 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.648 57.43 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 1.17 / / 9 0.600 0.00 / 9 8 3479 3479 3479 3479 3479 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 30.89 / 0.00 / 9 8 3480 3480 3480 3480 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 32.67 / 9 0.623 52.33 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 9 8 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.10 0.600 0.00 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.34 0.600 0.00 / / 9 8 Only Only Only Only 8 8 Only Only Only Only 8 9 0.683 0.600 251 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 3481 TOP : Longitudinal direction - Only minimum steel required. 3481 BOTT: Longitudinal direction - Only minimum steel required. 3481 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 251 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3481 TOP : BOTT: -- PAGE NO. 0.600 0.600 40.06 / 0.00 / 62.45 / 0.00 / 9 8 3482 3482 3482 3482 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 40.05 / 9 0.747 62.45 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 9 8 3483 3483 3483 3483 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 32.68 / 9 0.623 52.35 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 9 8 3484 3484 3484 3484 3484 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 30.91 / 0.00 / 9 8 3485 3485 3485 3485 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.645 57.13 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 1.18 / / 9 0.600 0.00 / 9 8 3486 3486 3486 3486 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.649 57.49 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 1.21 / / 9 0.600 0.00 / 8 8 3487 3487 3487 3487 3487 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 31.12 / 0.00 / 9 8 3488 3488 3488 3488 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 32.22 / 9 0.630 52.93 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 9 8 3489 3489 3489 3489 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 40.10 / 9 0.761 63.65 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 9 8 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.01 0.600 0.00 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.96 0.600 0.00 / / 9 9 Only Only Only Only 8 9 Only Only Only Only 8 9 0.746 0.600 252 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 3490 TOP : Longitudinal direction - Only minimum steel required. 3490 BOTT: Longitudinal direction - Only minimum steel required. 3490 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 252 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3490 TOP : BOTT: -- PAGE NO. 0.600 0.600 41.38 / 0.00 / 64.33 / 0.00 / 9 8 3491 3491 3491 3491 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 36.08 / 9 0.650 54.51 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 9 8 3492 3492 3492 3492 3492 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.42 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 32.77 / 0.00 / 9 8 3493 3493 3493 3493 3493 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 51.43 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.20 / 0.00 / 7 8 3494 3494 3494 3494 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.825 72.71 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.10 / / 8 0.600 3.83 / 7 8 3495 3495 3495 3495 3495 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 31.05 / 0.00 / 9 8 3496 3496 3496 3496 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 44.83 / 9 0.701 58.70 / BOTT: 0.600 0.00 / 8 0.600 0.00 / 9 8 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.47 0.600 0.00 9 9 Only Only Only Only 9 8 0.770 0.600 253 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 3497 BOTT: Longitudinal direction 3497 BOTT: Transverse direction 3497 TOP : 0.622 55.18 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. / 9 0.872 72.65 / / 8 0.600 0.00 / 9 8 3498 BOTT: Longitudinal direction 3498 BOTT: Transverse direction 3498 TOP : 0.609 54.01 BOTT: 0.600 0.00 - Only minimum steel required. - Only minimum steel required. / 9 0.867 72.27 / / 8 0.600 0.00 / 9 8 3499 TOP : Longitudinal direction - Only minimum steel required. 3499 BOTT: Longitudinal direction - Only minimum steel required. 3499 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 253 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3499 TOP : BOTT: -- PAGE NO. 0.600 0.600 41.55 / 0.00 / Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.44 0.600 1.14 Only Only Only Only 8 7 0.688 0.600 9 8 required. required. required. required. 29.76 / 0.00 / 9 8 TOP : BOTT: TOP : BOTT: TOP : BOTT: 3501 3501 3501 3501 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.872 76.79 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.600 4.40 / 9 9 3502 3502 3502 3502 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.862 75.92 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.600 4.55 / 9 9 3503 3503 3503 3503 3503 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 28.76 / 0.00 / 9 9 3504 3504 3504 3504 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 40.93 / 9 0.665 55.81 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 9 3505 3505 3505 3505 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 52.51 / 9 0.835 69.68 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 9 3506 3506 3506 3506 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 52.51 / 9 0.836 69.70 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 9 3507 3507 3507 3507 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 40.97 / 9 0.666 55.87 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 9 Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 57.69 / 0.00 / 3500 3500 3500 3500 3500 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.76 0.600 1.51 / / 9 8 254 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 3508 TOP : Longitudinal direction - Only minimum steel required. 3508 BOTT: Longitudinal direction - Only minimum steel required. 3508 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 254 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3508 BOTT: Transverse direction - Only minimum steel required. 3508 TOP : 0.600 7.18 / 8 0.600 28.82 / BOTT: 0.600 0.83 / 7 0.600 0.00 / 255 9 9 3509 3509 3509 3509 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.858 75.57 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.600 4.50 / 9 9 3510 3510 3510 3510 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.864 76.12 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.600 4.38 / 9 9 3511 3511 3511 3511 3511 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 29.47 / 0.00 / 8 9 3512 3512 3512 3512 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 40.52 / 9 0.681 57.10 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 9 3513 3513 3513 3513 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 52.72 / 9 0.858 71.55 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 9 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.21 0.600 1.26 3514 BOTT: Longitudinal direction 3514 BOTT: Transverse direction 3514 TOP : 0.612 54.34 BOTT: 0.600 0.00 Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 - Only minimum steel required. - Only minimum steel required. / 9 0.862 71.88 / / 7 0.600 0.00 / 9 9 3515 3515 3515 3515 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 45.46 / 9 0.690 57.82 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 9 3516 3516 3516 3516 3516 TOP : BOTT: TOP : BOTT: TOP : BOTT: 9 9 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 14.09 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 29.47 / 0.00 / 3517 TOP : Longitudinal direction - Only minimum steel required. 3517 TOP : Transverse direction - Only minimum steel required. 3517 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 255 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3517 TOP : BOTT: -- PAGE NO. 0.600 0.777 0.00 / 68.63 / 9 8 0.600 0.600 256 0.00 / 5.37 / 9 8 3518 3518 3518 3518 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.772 68.14 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.56 / / 8 0.600 6.15 / 7 8 3519 3519 3519 3519 3519 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.17 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.82 / 0.00 / 9 8 3520 3520 3520 3520 3520 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 39.65 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.80 / 0.00 / 9 8 3521 3521 3521 3521 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 51.19 / 9 0.628 52.77 / BOTT: 0.600 0.00 / 8 0.600 0.00 / 9 8 3522 3522 3522 3522 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 50.12 / 9 0.626 52.56 / BOTT: 0.600 0.00 / 8 0.600 0.00 / 9 8 3523 3523 3523 3523 3523 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.82 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.00 / 0.00 / 9 8 3524 3524 3524 3524 3524 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.78 0.600 1.57 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.35 / 0.16 / 8 7 3525 3525 3525 3525 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.812 71.65 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.600 7.37 / 8 9 3526 TOP : Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 256 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 257 3526 TOP : Transverse direction 3526 BOTT: Transverse direction 3526 TOP : 0.600 0.00 BOTT: 0.807 71.17 - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.600 7.51 / 8 9 3527 3527 3527 3527 3527 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.11 0.600 2.16 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.80 / 0.46 / 8 7 3528 3528 3528 3528 3528 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.27 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.94 / 0.00 / 8 7 3529 3529 3529 3529 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 48.78 / 9 0.606 50.91 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 8 7 3530 3530 3530 3530 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 48.76 / 9 0.606 50.88 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 7 3531 3531 3531 3531 3531 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.29 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 38.76 / 0.00 / 9 7 3532 3532 3532 3532 3532 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.34 0.600 1.24 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.43 / 0.09 / 8 7 3533 3533 3533 3533 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.802 70.79 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 8 0.600 0.00 / / 9 0.600 7.46 / 8 9 3534 TOP : Longitudinal direction - Only minimum steel required. 3534 TOP : Transverse direction - Only minimum steel required. 3534 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 257 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3534 TOP : BOTT: -- PAGE NO. 0.600 0.809 0.00 / 71.37 / 8 9 0.600 0.600 258 0.00 / 7.31 / 8 9 3535 3535 3535 3535 3535 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.42 0.600 1.71 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.66 / 0.40 / 8 7 3536 3536 3536 3536 3536 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 35.77 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.57 / 0.00 / 8 7 3537 3537 3537 3537 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 48.74 / 9 0.634 53.23 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 8 7 3538 3538 3538 3538 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 50.38 / 9 0.638 53.52 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 7 3539 3539 3539 3539 3539 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 41.07 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 41.48 / 0.00 / 9 7 3540 3540 3540 3540 3540 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 10.88 0.600 0.95 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.74 / 0.82 / 9 7 3541 3541 3541 3541 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.643 57.01 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 8 0.600 5.03 / 9 9 3542 3542 3542 3542 3542 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / 7 8 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.41 0.600 51.46 Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl required. required. required. required. 0.69 / 5.71 / Page 258 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 259 3543 3543 3543 3543 3543 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.90 0.600 2.89 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.12 / 0.00 / 9 8 3544 3544 3544 3544 3544 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.23 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.12 / 0.00 / 9 8 3545 3545 3545 3545 3545 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 34.70 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.14 / 0.00 / 9 8 3546 3546 3546 3546 3546 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.48 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.29 / 0.00 / 8 8 3547 3547 3547 3547 3547 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.50 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.14 / 0.08 / 8 7 3548 3548 3548 3548 3548 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 1.54 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.54 / 0.68 / 8 7 3549 3549 3549 3549 3549 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 50.34 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 5.93 / 8 9 3550 3550 3550 3550 3550 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 50.42 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 6.09 / 8 9 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 259 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 260 3551 3551 3551 3551 3551 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.26 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.24 / 0.93 / 8 7 3552 3552 3552 3552 3552 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.18 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.57 / 0.55 / 8 7 3553 3553 3553 3553 3553 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 32.66 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.59 / 0.23 / 8 7 3554 3554 3554 3554 3554 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 32.56 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 26.29 / 0.00 / 8 7 3555 3555 3555 3555 3555 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 26.15 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.12 / 0.00 / 8 7 3556 3556 3556 3556 3556 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 1.50 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 6.88 / 0.55 / 8 7 3557 3557 3557 3557 3557 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 49.95 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 6.02 / 8 9 3558 3558 3558 3558 3558 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 50.38 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 5.89 / 8 9 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 260 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 261 3559 3559 3559 3559 3559 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.01 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 7.91 / 0.98 / 8 7 3560 3560 3560 3560 3560 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 25.54 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 21.08 / 0.67 / 8 7 3561 3561 3561 3561 3561 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.57 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 28.77 / 0.44 / 8 7 3562 3562 3562 3562 3562 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.05 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 28.84 / 0.10 / 9 7 3563 3563 3563 3563 3563 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 31.01 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.11 / 0.36 / 9 7 3564 3564 3564 3564 3564 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.98 0.600 1.24 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 10.98 / 0.93 / 9 7 3565 3565 3565 3565 3565 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 29.32 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 1.55 / 9 7 3566 3566 3566 3566 3566 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.43 0.600 34.33 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.36 / 2.45 / 7 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 261 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 262 3567 3567 3567 3567 3567 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.21 0.600 4.82 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.87 / 0.00 / 9 8 3568 3568 3568 3568 3568 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 21.01 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.01 / 0.00 / 9 8 3569 3569 3569 3569 3569 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 15.82 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 14.25 / 0.00 / 8 8 3570 3570 3570 3570 3570 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.13 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.90 / 0.13 / 8 7 3571 3571 3571 3571 3571 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.11 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.01 / 0.19 / 8 7 3572 3572 3572 3572 3572 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.17 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.14 / 0.11 / 8 7 3573 3573 3573 3573 3573 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 26.35 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.18 / 8 9 3574 3574 3574 3574 3574 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 26.94 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.32 / 8 9 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 262 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 263 3575 3575 3575 3575 3575 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.51 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.05 / 0.17 / 8 7 3576 3576 3576 3576 3576 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.04 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.96 / 0.32 / 8 7 3577 3577 3577 3577 3577 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.44 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.29 / 0.00 / 8 7 3578 3578 3578 3578 3578 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.86 0.600 1.18 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.66 / 0.03 / 8 7 3579 3579 3579 3579 3579 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.30 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.89 / 0.25 / 8 7 3580 3580 3580 3580 3580 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.28 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.95 / 0.04 / 8 7 3581 3581 3581 3581 3581 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 26.32 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.24 / 8 9 3582 3582 3582 3582 3582 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 26.56 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.20 / 8 9 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 263 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 264 3583 3583 3583 3583 3583 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.66 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.26 / 0.16 / 8 7 3584 3584 3584 3584 3584 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.32 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.17 / 0.33 / 8 7 3585 3585 3585 3585 3585 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.68 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.33 / 0.00 / 9 7 3586 3586 3586 3586 3586 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 11.80 0.600 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.86 / 0.46 / 8 7 3587 3587 3587 3587 3587 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.04 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.69 / 0.37 / 8 7 3588 3588 3588 3588 3588 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.45 0.600 1.16 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.93 / 0.04 / 9 7 3589 3589 3589 3589 3589 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 11.10 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.68 / 0.00 / 9 7 3590 3590 3590 3590 3590 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.10 0.400 0.06 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.06 / 0.00 / 9 7 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 264 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 265 3591 3591 3591 3591 3591 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.40 0.400 0.39 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.63 / 0.00 / 9 7 3592 3592 3592 3592 3592 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.11 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.90 / 0.56 / 7 8 3593 3593 3593 3593 3593 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 10.15 0.400 0.49 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.01 / 0.00 / 9 8 3594 3594 3594 3594 3594 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 4.34 0.400 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.38 / 0.39 / 7 8 3595 3595 3595 3595 3595 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.88 0.400 0.60 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.97 / 7 9 3596 3596 3596 3596 3596 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.61 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 1.00 / 7 9 3597 3597 3597 3597 3597 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 10.23 0.400 4.18 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.08 / 1.27 / 8 7 3598 3598 3598 3598 3598 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 6.71 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.87 / 0.09 / 7 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 265 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 266 3599 3599 3599 3599 3599 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.50 0.400 0.20 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.36 / 0.14 / 8 7 3600 3600 3600 3600 3600 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.27 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.63 / 8 9 3601 3601 3601 3601 3601 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 8.57 0.400 7.49 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.99 / 1.18 / 8 7 3602 3602 3602 3602 3602 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.08 0.400 1.08 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 3.10 / 3.10 / 8 7 3603 3603 3603 3603 3603 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 12.26 0.400 12.26 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 7.85 / 7.85 / 8 7 3604 3604 3604 3604 3604 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.30 0.400 1.30 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.57 / 0.57 / 7 8 3605 3605 3605 3605 3605 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 11.97 0.400 11.97 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.22 / 1.22 / 7 8 3606 3606 3606 3606 3606 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.53 0.400 2.53 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.34 / 0.34 / 7 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 266 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 267 3607 3607 3607 3607 3607 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 7.73 0.400 7.73 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.96 / 0.96 / 7 8 3608 3608 3608 3608 3608 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.06 0.400 2.10 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 2.06 / 7 9 3609 3609 3609 3609 3609 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.39 0.400 0.40 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.63 / 7 9 3610 3610 3610 3610 3610 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.11 0.400 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.56 / 0.90 / 7 8 3611 3611 3611 3611 3611 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.49 0.400 10.15 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 2.01 / 7 9 3612 3612 3612 3612 3612 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 4.34 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.39 / 0.38 / 7 8 3613 3613 3613 3613 3613 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.60 0.400 0.88 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.97 / 0.00 / 9 8 3614 3614 3614 3614 3614 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.61 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.00 / 0.00 / 9 8 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 267 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 268 3615 3615 3615 3615 3615 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 4.18 0.400 10.23 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.27 / 2.08 / 8 7 3616 3616 3616 3616 3616 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 6.71 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.09 / 0.87 / 7 8 3617 3617 3617 3617 3617 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.20 0.400 1.50 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.14 / 0.36 / 8 7 3618 3618 3618 3618 3618 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.27 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.63 / 0.00 / 9 7 3619 3619 3619 3619 3619 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 7.49 0.400 8.57 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.18 / 0.99 / 8 7 3620 3620 3620 3620 3620 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 22.77 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.54 / 0.00 / 8 7 3621 3621 3621 3621 3621 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.44 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.05 / 0.00 / 8 7 3622 3622 3622 3622 3622 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 16.35 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.53 / 0.00 / 8 7 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 268 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 269 3623 3623 3623 3623 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 14.31 / 9 0.708 59.28 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 8 7 3624 3624 3624 3624 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 10.04 / 8 0.777 64.93 / BOTT: 0.600 0.00 / 7 0.600 4.11 / 8 7 3625 3625 3625 3625 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 8.19 / 8 0.675 56.62 / BOTT: 0.600 0.00 / 7 0.600 5.77 / 8 7 3626 3626 3626 3626 3626 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 5.42 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 33.51 / 5.16 / 8 7 3627 3627 3627 3627 3627 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 15.03 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 9.15 / 4.50 / 8 7 3628 3628 3628 3628 3628 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 15.03 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 9.15 / 4.50 / 7 8 3629 3629 3629 3629 3629 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 5.42 0.600 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 33.51 / 5.16 / 7 8 3630 3630 3630 3630 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 8.19 / 7 0.675 56.62 / BOTT: 0.600 0.00 / 8 0.600 5.77 / 7 8 3631 TOP : Longitudinal direction - Only minimum steel required. 3631 BOTT: Longitudinal direction - Only minimum steel required. 3631 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 269 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3631 TOP : BOTT: -- PAGE NO. 0.600 0.600 10.04 / 0.00 / 64.93 / 4.11 / 7 8 3632 3632 3632 3632 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 14.31 / 9 0.708 59.28 / BOTT: 0.600 0.00 / 8 0.600 0.00 / 7 8 3633 3633 3633 3633 3633 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 16.35 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 45.53 / 0.00 / 7 8 3634 3634 3634 3634 3634 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.44 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 27.05 / 0.00 / 7 8 3635 3635 3635 3635 3635 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 22.77 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.54 / 0.00 / 7 8 3636 3636 3636 3636 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.628 55.72 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 1.36 / / 7 0.600 0.67 / 8 7 3637 3637 3637 3637 3637 TOP : BOTT: TOP : BOTT: TOP : BOTT: / / required. required. required. required. 30.92 / 0.00 / 9 7 3638 3638 3638 3638 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 37.33 / 9 0.605 50.85 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 7 3639 3639 3639 3639 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 35.73 / 7 0.707 59.23 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 7 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 16.69 0.600 0.00 7 8 Only Only Only Only 9 7 0.777 0.600 270 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 3640 TOP : Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 270 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 271 3640 BOTT: Longitudinal direction 3640 BOTT: Transverse direction 3640 TOP : 0.600 25.57 BOTT: 0.600 7.56 - Only minimum steel required. - Only minimum steel required. / 7 0.696 58.28 / / 8 0.600 0.00 / 9 7 3641 3641 3641 3641 3641 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 15.78 0.600 8.81 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 49.23 / 0.00 / 9 7 3642 3642 3642 3642 3642 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.53 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 30.41 / 0.00 / 9 7 3643 3643 3643 3643 3643 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.66 0.600 32.57 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.02 / 0.00 / 9 7 3644 3644 3644 3644 3644 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 6.66 0.600 32.57 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.02 / 0.00 / 9 7 3645 3645 3645 3645 3645 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.53 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 30.41 / 0.00 / 9 7 3646 3646 3646 3646 3646 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 15.78 0.600 8.81 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 49.23 / 0.00 / 9 7 3647 3647 3647 3647 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 25.57 / 8 0.696 58.28 / BOTT: 0.600 7.56 / 7 0.600 0.00 / 9 7 3648 TOP : Longitudinal direction - Only minimum steel required. 3648 BOTT: Longitudinal direction - Only minimum steel required. 3648 BOTT: Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 271 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3648 TOP : BOTT: -- PAGE NO. 0.600 0.600 35.73 / 0.00 / 59.23 / 0.00 / 9 7 3649 3649 3649 3649 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.600 37.33 / 9 0.605 50.85 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 9 7 3650 3650 3650 3650 3650 TOP : BOTT: TOP : BOTT: TOP : BOTT: required. required. required. required. 30.92 / 0.00 / 9 7 3651 3651 3651 3651 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.628 55.72 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 1.36 / / 8 0.600 0.67 / 7 8 3652 3652 3652 3652 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.817 72.08 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 7 0.600 7.61 / 7 9 3653 3653 3653 3653 3653 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.72 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.58 / 2.63 / 7 8 3654 3654 3654 3654 3654 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 44.24 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 41.05 / 6.04 / 7 8 3655 3655 3655 3655 3655 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.26 0.600 1.43 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 47.24 / 16.55 / 7 8 3656 3656 3656 3656 3656 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.79 0.600 27.06 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.02 / 31.49 / 7 8 Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 16.69 0.600 0.00 / / 8 7 Only Only Only Only 9 7 0.707 0.600 272 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 272 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 273 3657 3657 3657 3657 3657 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.59 0.600 28.54 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.79 / 29.38 / 7 8 3658 3658 3658 3658 3658 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.08 0.600 1.85 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.64 / 11.25 / 7 8 3659 3659 3659 3659 3659 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.56 0.600 37.23 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 11.22 / 7 7 3660 3660 3660 3660 3660 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 17.56 0.600 37.23 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 11.22 / 7 8 3661 3661 3661 3661 3661 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.08 0.600 1.85 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.64 / 11.25 / 8 7 3662 3662 3662 3662 3662 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 9.59 0.600 28.54 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 23.79 / 29.38 / 8 7 3663 3663 3663 3663 3663 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 28.79 0.600 27.06 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 40.02 / 31.49 / 8 7 3664 3664 3664 3664 3664 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 47.26 0.600 1.43 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 47.24 / 16.55 / 8 7 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 273 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 274 3665 3665 3665 3665 3665 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 44.24 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 41.05 / 6.04 / 8 7 3666 3666 3666 3666 3666 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.72 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 20.58 / 2.63 / 8 7 3667 3667 3667 3667 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.817 72.08 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 8 0.600 7.61 / 8 9 3668 3668 3668 3668 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.765 67.53 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 7 0.600 10.76 / 8 9 3669 3669 3669 3669 3669 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.18 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.15 / 5.91 / 7 8 3670 3670 3670 3670 3670 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 39.72 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 21.06 / 11.83 / 7 8 3671 3671 3671 3671 3671 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 45.36 0.600 7.50 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.59 / 22.48 / 7 8 3672 3672 3672 3672 3672 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 23.03 0.600 29.71 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 12.10 / 34.05 / 7 8 3673 TOP : Longitudinal direction - Only minimum steel required. 3673 BOTT: Longitudinal direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 274 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 275 3673 TOP : Transverse direction 3673 BOTT: Transverse direction 3673 TOP : 0.600 23.03 BOTT: 0.600 29.71 - Only minimum steel required. - Only minimum steel required. / 8 0.600 12.10 / / 7 0.600 34.05 / 8 7 3674 3674 3674 3674 3674 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 45.36 0.600 7.50 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 22.59 / 22.48 / 8 7 3675 3675 3675 3675 3675 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 39.72 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 21.06 / 11.83 / 8 7 3676 3676 3676 3676 3676 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 7.18 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.15 / 5.91 / 8 7 3677 3677 3677 3677 TOP : Longitudinal direction TOP : Transverse direction BOTT: Transverse direction TOP : 0.600 0.00 BOTT: 0.765 67.53 - Only minimum steel required. - Only minimum steel required. - Only minimum steel required. / 9 0.600 0.00 / / 8 0.600 10.76 / 8 9 3678 3678 3678 3678 3678 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.53 0.600 50.70 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 9.26 / 8 9 3679 3679 3679 3679 3679 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.50 0.600 1.33 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.42 / 8 8 3680 3680 3680 3680 3680 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 30.19 0.600 4.92 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.46 / 7.97 / 7 8 3681 TOP : Longitudinal direction - Only minimum steel required. 3681 BOTT: Longitudinal direction - Only minimum steel required. 3681 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 275 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3681 BOTT: Transverse direction - Only minimum steel required. 3681 TOP : 0.600 36.76 / 7 0.600 5.40 / BOTT: 0.600 11.53 / 8 0.600 8.28 / 276 7 8 3682 3682 3682 3682 3682 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.29 0.600 20.77 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.90 / 6.78 / 7 8 3683 3683 3683 3683 3683 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.29 0.600 20.77 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.90 / 6.78 / 8 7 3684 3684 3684 3684 3684 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.76 0.600 11.53 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.40 / 8.28 / 8 7 3685 3685 3685 3685 3685 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 30.19 0.600 4.92 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 4.46 / 7.97 / 8 7 3686 3686 3686 3686 3686 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.50 0.600 1.33 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 4.42 / 8 7 3687 3687 3687 3687 3687 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.53 0.600 50.70 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 9.26 / 8 9 3688 3688 3688 3688 3688 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.69 0.600 31.70 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 3.34 / 8 7 3689 TOP : Longitudinal direction - Only minimum steel required. 3689 BOTT: Longitudinal direction - Only minimum steel required. 3689 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 276 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3689 BOTT: Transverse direction - Only minimum steel required. 3689 TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 4.10 / 9 0.600 1.42 / 277 8 9 3690 3690 3690 3690 3690 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.40 0.600 8.06 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.36 / 8 9 3691 3691 3691 3691 3691 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.48 0.600 13.90 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 1.45 / 8 8 3692 3692 3692 3692 3692 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.07 0.600 16.80 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.17 / 1.30 / 7 8 3693 3693 3693 3693 3693 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.07 0.600 16.80 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.17 / 1.30 / 8 7 3694 3694 3694 3694 3694 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.48 0.600 13.90 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 1.45 / 8 7 3695 3695 3695 3695 3695 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 22.40 0.600 8.06 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.36 / 8 9 3696 3696 3696 3696 3696 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.10 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 1.42 / 8 9 3697 TOP : Longitudinal direction - Only minimum steel required. 3697 BOTT: Longitudinal direction - Only minimum steel required. 3697 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 277 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3697 BOTT: Transverse direction - Only minimum steel required. 3697 TOP : 0.600 0.69 / 7 0.600 0.00 / BOTT: 0.600 31.70 / 8 0.600 3.34 / 278 8 8 3698 3698 3698 3698 3698 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.30 0.600 0.18 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.19 / 0.40 / 8 9 3699 3699 3699 3699 3699 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.08 0.600 0.26 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.22 / 1.27 / 8 9 3700 3700 3700 3700 3700 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.07 0.600 0.51 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 1.93 / 8 9 3701 3701 3701 3701 3701 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.06 0.600 0.59 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.08 / 2.21 / 8 9 3702 3702 3702 3702 3702 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.06 0.600 0.53 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.05 / 2.11 / 8 9 3703 3703 3703 3703 3703 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.09 0.600 0.34 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 1.64 / 8 9 3704 3704 3704 3704 3704 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.16 0.600 0.06 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.15 / 1.00 / 8 9 3705 TOP : Longitudinal direction - Only minimum steel required. 3705 BOTT: Longitudinal direction - Only minimum steel required. 3705 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 278 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3705 BOTT: Transverse direction - Only minimum steel required. 3705 TOP : 0.600 0.57 / 9 0.600 0.13 / BOTT: 0.600 0.00 / 9 0.600 0.35 / 279 8 9 3706 3706 3706 3706 3706 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.57 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.13 / 0.35 / 7 9 3707 3707 3707 3707 3707 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.16 0.600 0.06 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.15 / 1.00 / 7 9 3708 3708 3708 3708 3708 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.09 0.600 0.34 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 1.64 / 7 9 3709 3709 3709 3709 3709 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.06 0.600 0.53 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.05 / 2.11 / 7 9 3710 3710 3710 3710 3710 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.06 0.600 0.59 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.08 / 2.21 / 7 9 3711 3711 3711 3711 3711 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.07 0.600 0.51 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 1.93 / 7 9 3712 3712 3712 3712 3712 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.08 0.600 0.26 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.22 / 1.27 / 7 9 3713 TOP : Longitudinal direction - Only minimum steel required. 3713 BOTT: Longitudinal direction - Only minimum steel required. 3713 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 279 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3713 BOTT: Transverse direction - Only minimum steel required. 3713 TOP : 0.600 0.30 / 9 0.600 0.19 / BOTT: 0.600 0.18 / 7 0.600 0.40 / 280 7 9 3714 3714 3714 3714 3714 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.83 0.600 0.40 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.08 / 0.08 / 7 8 3715 3715 3715 3715 3715 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.01 0.600 0.11 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.39 / 7 9 3716 3716 3716 3716 3716 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.03 0.600 0.50 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.79 / 8 9 3717 3717 3717 3717 3717 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.07 0.600 0.60 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.05 / 0.99 / 8 9 3718 3718 3718 3718 3718 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.11 0.600 0.52 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.95 / 8 9 3719 3719 3719 3719 3719 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.18 0.600 0.25 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 0.71 / 8 9 3720 3720 3720 3720 3720 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.28 0.600 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 0.28 / 8 9 3721 TOP : Longitudinal direction - Only minimum steel required. 3721 BOTT: Longitudinal direction - Only minimum steel required. 3721 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 280 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3721 BOTT: Transverse direction - Only minimum steel required. 3721 TOP : 0.600 1.11 / 9 0.600 0.12 / BOTT: 0.600 0.00 / 9 0.600 0.03 / 281 9 7 3722 3722 3722 3722 3722 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.11 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.12 / 0.03 / 9 8 3723 3723 3723 3723 3723 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.28 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 0.28 / 7 9 3724 3724 3724 3724 3724 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.18 0.600 0.25 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 0.71 / 7 9 3725 3725 3725 3725 3725 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.11 0.600 0.52 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.95 / 7 9 3726 3726 3726 3726 3726 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.07 0.600 0.60 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.05 / 0.99 / 7 9 3727 3727 3727 3727 3727 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.03 0.600 0.50 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.79 / 7 9 3728 3728 3728 3728 3728 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.01 0.600 0.11 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.39 / 7 9 3729 TOP : Longitudinal direction - Only minimum steel required. 3729 BOTT: Longitudinal direction - Only minimum steel required. 3729 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 281 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3729 BOTT: Transverse direction - Only minimum steel required. 3729 TOP : 0.600 0.83 / 9 0.600 0.08 / BOTT: 0.600 0.40 / 7 0.600 0.08 / 282 8 7 3730 3730 3730 3730 3730 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.83 0.600 0.40 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.17 / 0.10 / 9 8 3731 3731 3731 3731 3731 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.09 0.600 0.19 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.05 / 0.09 / 7 8 3732 3732 3732 3732 3732 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.40 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.20 / 7 9 3733 3733 3733 3733 3733 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.06 0.600 0.51 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.31 / 8 9 3734 3734 3734 3734 3734 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.15 0.600 0.40 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.30 / 8 9 3735 3735 3735 3735 3735 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.25 0.600 0.10 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.17 / 8 9 3736 3736 3736 3736 3736 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.41 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 0.08 / 8 7 3737 TOP : Longitudinal direction - Only minimum steel required. 3737 BOTT: Longitudinal direction - Only minimum steel required. 3737 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 282 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3737 BOTT: Transverse direction - Only minimum steel required. 3737 TOP : 0.600 1.19 / 9 0.600 0.23 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 283 9 7 3738 3738 3738 3738 3738 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.19 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.23 / 0.00 / 9 7 3739 3739 3739 3739 3739 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.41 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.09 / 0.08 / 7 8 3740 3740 3740 3740 3740 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.25 0.600 0.10 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.17 / 7 9 3741 3741 3741 3741 3741 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.15 0.600 0.40 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.30 / 7 9 3742 3742 3742 3742 3742 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.06 0.600 0.51 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.31 / 7 9 3743 3743 3743 3743 3743 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.40 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.20 / 7 9 3744 3744 3744 3744 3744 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.09 0.600 0.19 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.05 / 0.09 / 8 7 3745 TOP : Longitudinal direction - Only minimum steel required. 3745 BOTT: Longitudinal direction - Only minimum steel required. 3745 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 283 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3745 BOTT: Transverse direction - Only minimum steel required. 3745 TOP : 0.600 0.83 / 9 0.600 0.17 / BOTT: 0.600 0.40 / 7 0.600 0.10 / 284 9 7 3746 3746 3746 3746 3746 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.48 0.600 0.45 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.12 / 0.15 / 9 8 3747 3747 3747 3747 3747 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.06 0.600 0.25 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.08 / 0.11 / 7 8 3748 3748 3748 3748 3748 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.31 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.03 / 0.07 / 7 8 3749 3749 3749 3749 3749 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.05 0.600 0.37 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.02 / 7 8 3750 3750 3750 3750 3750 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.17 0.600 0.25 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.03 / 8 7 3751 3751 3751 3751 3751 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.30 0.600 0.03 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.08 / 0.03 / 9 7 3752 3752 3752 3752 3752 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.54 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.18 / 0.00 / 9 7 3753 TOP : Longitudinal direction - Only minimum steel required. 3753 BOTT: Longitudinal direction - Only minimum steel required. 3753 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 284 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3753 BOTT: Transverse direction - Only minimum steel required. 3753 TOP : 0.600 1.18 / 9 0.600 0.28 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 285 9 7 3754 3754 3754 3754 3754 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.18 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.28 / 0.00 / 9 7 3755 3755 3755 3755 3755 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.54 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.18 / 0.00 / 9 8 3756 3756 3756 3756 3756 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.30 0.600 0.03 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.08 / 0.03 / 9 8 3757 3757 3757 3757 3757 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.17 0.600 0.25 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.03 / 7 8 3758 3758 3758 3758 3758 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.05 0.600 0.37 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.02 / 7 7 3759 3759 3759 3759 3759 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.31 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.03 / 0.07 / 8 7 3760 3760 3760 3760 3760 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.06 0.600 0.25 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.08 / 0.11 / 8 7 3761 TOP : Longitudinal direction - Only minimum steel required. 3761 BOTT: Longitudinal direction - Only minimum steel required. 3761 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 285 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3761 BOTT: Transverse direction - Only minimum steel required. 3761 TOP : 0.600 0.48 / 9 0.600 0.12 / BOTT: 0.600 0.45 / 7 0.600 0.15 / 286 9 7 3762 3762 3762 3762 3762 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.02 0.600 0.54 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.01 / 0.22 / 7 8 3763 3763 3763 3763 3763 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.30 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.13 / 7 8 3764 3764 3764 3764 3764 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.25 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.07 / 9 8 3765 3765 3765 3765 3765 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.04 0.600 0.25 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.02 / 9 8 3766 3766 3766 3766 3766 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.19 0.600 0.11 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.10 / 0.00 / 9 8 3767 3767 3767 3767 3767 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.34 0.600 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 0.00 / 9 8 3768 3768 3768 3768 3768 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.62 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.20 / 0.00 / 9 8 3769 TOP : Longitudinal direction - Only minimum steel required. 3769 BOTT: Longitudinal direction - Only minimum steel required. 3769 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 286 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3769 BOTT: Transverse direction - Only minimum steel required. 3769 TOP : 0.600 1.15 / 9 0.600 0.30 / BOTT: 0.600 0.00 / 9 0.600 0.00 / 287 9 8 3770 3770 3770 3770 3770 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.15 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.30 / 0.00 / 9 8 3771 3771 3771 3771 3771 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.62 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.20 / 0.00 / 9 8 3772 3772 3772 3772 3772 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.34 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 0.00 / 9 8 3773 3773 3773 3773 3773 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.19 0.600 0.11 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.10 / 0.00 / 9 8 3774 3774 3774 3774 3774 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.04 0.600 0.25 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.02 / 9 7 3775 3775 3775 3775 3775 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.25 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.07 / 9 7 3776 3776 3776 3776 3776 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.30 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.13 / 8 7 3777 TOP : Longitudinal direction - Only minimum steel required. 3777 BOTT: Longitudinal direction - Only minimum steel required. 3777 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 287 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3777 BOTT: Transverse direction - Only minimum steel required. 3777 TOP : 0.600 0.02 / 8 0.600 0.01 / BOTT: 0.600 0.54 / 7 0.600 0.22 / 288 8 7 3778 3778 3778 3778 3778 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.61 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.20 / 8 8 3779 3779 3779 3779 3779 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.35 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.04 / 8 8 3780 3780 3780 3780 3780 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.22 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.01 / 0.02 / 9 8 3781 3781 3781 3781 3781 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.03 0.600 0.17 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.03 / 0.01 / 9 8 3782 3782 3782 3782 3782 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.19 0.600 0.05 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.00 / 9 8 3783 3783 3783 3783 3783 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.37 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.05 / 0.00 / 9 8 3784 3784 3784 3784 3784 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.68 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.06 / 0.00 / 9 8 3785 TOP : Longitudinal direction - Only minimum steel required. 3785 BOTT: Longitudinal direction - Only minimum steel required. 3785 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 288 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3785 BOTT: Transverse direction - Only minimum steel required. 3785 TOP : 0.600 1.10 / 9 0.600 0.22 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 289 9 8 3786 3786 3786 3786 3786 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.10 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.22 / 0.00 / 9 8 3787 3787 3787 3787 3787 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.68 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.06 / 0.00 / 9 8 3788 3788 3788 3788 3788 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.37 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.05 / 0.00 / 9 8 3789 3789 3789 3789 3789 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.19 0.600 0.05 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.00 / 9 8 3790 3790 3790 3790 3790 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.03 0.600 0.17 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.03 / 0.01 / 9 7 3791 3791 3791 3791 3791 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.22 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.01 / 0.02 / 9 7 3792 3792 3792 3792 3792 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.35 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.04 / 9 7 3793 TOP : Longitudinal direction - Only minimum steel required. 3793 BOTT: Longitudinal direction - Only minimum steel required. 3793 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 289 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3793 BOTT: Transverse direction - Only minimum steel required. 3793 TOP : 0.600 0.00 / 7 0.600 0.00 / BOTT: 0.600 0.61 / 9 0.600 0.20 / 290 9 7 3794 3794 3794 3794 3794 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.14 0.600 0.67 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.44 / 0.11 / 8 7 3795 3795 3795 3795 3795 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.09 0.600 0.06 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.51 / 0.15 / 8 7 3796 3796 3796 3796 3796 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.41 0.600 0.06 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.10 / 0.13 / 8 9 3797 3797 3797 3797 3797 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.50 0.600 0.08 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.10 / 0.23 / 8 9 3798 3798 3798 3798 3798 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.44 0.600 0.10 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.66 / 0.33 / 8 9 3799 3799 3799 3799 3799 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.30 0.600 0.11 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.95 / 0.39 / 8 9 3800 3800 3800 3800 3800 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.10 0.600 0.14 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.28 / 0.37 / 7 9 3801 TOP : Longitudinal direction - Only minimum steel required. 3801 BOTT: Longitudinal direction - Only minimum steel required. 3801 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 290 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3801 BOTT: Transverse direction - Only minimum steel required. 3801 TOP : 0.600 0.10 / 9 0.600 0.04 / BOTT: 0.600 0.27 / 7 0.600 0.19 / 291 7 9 3802 3802 3802 3802 3802 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.10 0.600 0.27 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.19 / 8 9 3803 3803 3803 3803 3803 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.10 0.600 0.14 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.28 / 0.37 / 8 9 3804 3804 3804 3804 3804 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.30 0.600 0.11 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.95 / 0.39 / 7 9 3805 3805 3805 3805 3805 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.44 0.600 0.10 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.66 / 0.33 / 7 9 3806 3806 3806 3806 3806 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.50 0.600 0.08 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.10 / 0.23 / 7 9 3807 3807 3807 3807 3807 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.41 0.600 0.06 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.10 / 0.13 / 7 9 3808 3808 3808 3808 3808 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.09 0.600 0.06 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.51 / 0.15 / 7 8 3809 TOP : Longitudinal direction - Only minimum steel required. 3809 BOTT: Longitudinal direction - Only minimum steel required. 3809 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 291 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3809 BOTT: Transverse direction - Only minimum steel required. 3809 TOP : 0.600 0.14 / 8 0.600 0.44 / BOTT: 0.600 0.67 / 7 0.600 0.11 / 292 7 8 3810 3810 3810 3810 3810 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.44 0.600 1.74 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 0.18 / 7 8 3811 3811 3811 3811 3811 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.39 0.600 0.51 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.33 / 0.11 / 8 9 3812 3812 3812 3812 3812 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.28 0.600 0.11 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.75 / 0.14 / 8 9 3813 3813 3813 3813 3813 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.40 0.600 0.10 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.90 / 0.16 / 8 9 3814 3814 3814 3814 3814 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.49 0.600 0.10 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.82 / 0.17 / 8 9 3815 3815 3815 3815 3815 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.47 0.600 0.20 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.60 / 0.15 / 8 9 3816 3816 3816 3816 3816 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.40 0.600 0.50 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.32 / 0.08 / 8 9 3817 TOP : Longitudinal direction - Only minimum steel required. 3817 BOTT: Longitudinal direction - Only minimum steel required. 3817 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 292 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3817 BOTT: Transverse direction - Only minimum steel required. 3817 TOP : 0.600 0.32 / 8 0.600 0.12 / BOTT: 0.600 0.82 / 7 0.600 0.09 / 293 8 7 3818 3818 3818 3818 3818 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.32 0.600 0.82 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.12 / 0.09 / 7 8 3819 3819 3819 3819 3819 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.40 0.600 0.50 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.32 / 0.08 / 7 9 3820 3820 3820 3820 3820 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.47 0.600 0.20 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.60 / 0.15 / 7 9 3821 3821 3821 3821 3821 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.49 0.600 0.10 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.82 / 0.17 / 7 9 3822 3822 3822 3822 3822 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.40 0.600 0.10 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.90 / 0.16 / 7 9 3823 3823 3823 3823 3823 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.28 0.600 0.11 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.75 / 0.14 / 7 9 3824 3824 3824 3824 3824 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.39 0.600 0.51 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.33 / 0.11 / 7 9 3825 TOP : Longitudinal direction - Only minimum steel required. 3825 BOTT: Longitudinal direction - Only minimum steel required. 3825 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 293 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3825 BOTT: Transverse direction - Only minimum steel required. 3825 TOP : 0.600 0.44 / 8 0.600 0.00 / BOTT: 0.600 1.74 / 7 0.600 0.18 / 294 8 7 3826 3826 3826 3826 3826 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.88 0.600 2.36 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.39 / 7 8 3827 3827 3827 3827 3827 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.79 0.600 1.14 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.06 / 0.15 / 7 8 3828 3828 3828 3828 3828 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.52 0.600 0.30 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.10 / 0.13 / 8 9 3829 3829 3829 3829 3829 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.23 0.600 0.12 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.28 / 0.11 / 8 9 3830 3830 3830 3830 3830 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.49 0.600 0.10 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.37 / 0.08 / 8 9 3831 3831 3831 3831 3831 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.66 0.600 0.44 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.36 / 0.08 / 8 7 3832 3832 3832 3832 3832 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.80 0.600 0.89 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.29 / 0.16 / 8 7 3833 TOP : Longitudinal direction - Only minimum steel required. 3833 BOTT: Longitudinal direction - Only minimum steel required. 3833 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 294 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3833 BOTT: Transverse direction - Only minimum steel required. 3833 TOP : 0.600 0.90 / 8 0.600 0.21 / BOTT: 0.600 1.42 / 7 0.600 0.24 / 295 8 7 3834 3834 3834 3834 3834 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.90 0.600 1.42 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.21 / 0.24 / 7 8 3835 3835 3835 3835 3835 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.80 0.600 0.89 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.29 / 0.16 / 7 8 3836 3836 3836 3836 3836 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.66 0.600 0.44 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.36 / 0.08 / 7 8 3837 3837 3837 3837 3837 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.49 0.600 0.10 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.37 / 0.08 / 7 9 3838 3838 3838 3838 3838 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.23 0.600 0.12 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.28 / 0.11 / 7 9 3839 3839 3839 3839 3839 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.52 0.600 0.30 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.10 / 0.13 / 7 9 3840 3840 3840 3840 3840 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.79 0.600 1.14 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.06 / 0.15 / 8 7 3841 TOP : Longitudinal direction - Only minimum steel required. 3841 BOTT: Longitudinal direction - Only minimum steel required. 3841 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 295 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3841 BOTT: Transverse direction - Only minimum steel required. 3841 TOP : 0.600 0.88 / 8 0.600 0.07 / BOTT: 0.600 2.36 / 7 0.600 0.39 / 296 8 7 3842 3842 3842 3842 3842 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.57 0.600 2.80 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.21 / 0.45 / 7 8 3843 3843 3843 3843 3843 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.22 0.600 1.63 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.15 / 0.32 / 7 8 3844 3844 3844 3844 3844 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.73 0.600 0.68 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.10 / 0.17 / 7 8 3845 3845 3845 3845 3845 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.29 0.600 0.13 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.06 / 7 9 3846 3846 3846 3846 3846 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.45 0.600 0.15 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 0.07 / 8 7 3847 3847 3847 3847 3847 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.81 0.600 0.65 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.25 / 0.17 / 8 7 3848 3848 3848 3848 3848 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.18 0.600 1.26 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.31 / 0.26 / 8 7 3849 TOP : Longitudinal direction - Only minimum steel required. 3849 BOTT: Longitudinal direction - Only minimum steel required. 3849 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 296 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3849 BOTT: Transverse direction - Only minimum steel required. 3849 TOP : 0.600 1.61 / 8 0.600 0.35 / BOTT: 0.600 1.99 / 7 0.600 0.32 / 297 8 7 3850 3850 3850 3850 3850 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.61 0.600 1.99 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.35 / 0.32 / 7 8 3851 3851 3851 3851 3851 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.18 0.600 1.26 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.31 / 0.26 / 7 8 3852 3852 3852 3852 3852 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.81 0.600 0.65 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.25 / 0.17 / 7 8 3853 3853 3853 3853 3853 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.45 0.600 0.15 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 0.07 / 7 8 3854 3854 3854 3854 3854 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.29 0.600 0.13 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.06 / 8 9 3855 3855 3855 3855 3855 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.73 0.600 0.68 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.10 / 0.17 / 8 7 3856 3856 3856 3856 3856 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.22 0.600 1.63 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.15 / 0.32 / 8 7 3857 TOP : Longitudinal direction - Only minimum steel required. 3857 BOTT: Longitudinal direction - Only minimum steel required. 3857 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 297 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3857 BOTT: Transverse direction - Only minimum steel required. 3857 TOP : 0.600 1.57 / 8 0.600 0.21 / BOTT: 0.600 2.80 / 7 0.600 0.45 / 298 8 7 3858 3858 3858 3858 3858 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.61 0.600 3.35 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.46 / 0.52 / 7 8 3859 3859 3859 3859 3859 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.67 0.600 2.04 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.31 / 0.39 / 7 8 3860 3860 3860 3860 3860 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.93 0.600 0.98 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.16 / 0.24 / 7 8 3861 3861 3861 3861 3861 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.34 0.600 0.19 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.10 / 7 8 3862 3862 3862 3862 3862 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.40 0.600 0.22 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.07 / 8 7 3863 3863 3863 3863 3863 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.93 0.600 0.83 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.19 / 0.18 / 8 7 3864 3864 3864 3864 3864 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.51 0.600 1.59 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.35 / 0.30 / 8 7 3865 TOP : Longitudinal direction - Only minimum steel required. 3865 BOTT: Longitudinal direction - Only minimum steel required. 3865 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 298 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3865 BOTT: Transverse direction - Only minimum steel required. 3865 TOP : 0.600 2.33 / 8 0.600 0.52 / BOTT: 0.600 2.57 / 7 0.600 0.39 / 299 8 7 3866 3866 3866 3866 3866 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.33 0.600 2.57 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.52 / 0.39 / 7 8 3867 3867 3867 3867 3867 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.51 0.600 1.59 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.35 / 0.30 / 7 8 3868 3868 3868 3868 3868 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.93 0.600 0.83 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.19 / 0.18 / 7 8 3869 3869 3869 3869 3869 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.40 0.600 0.22 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.07 / 7 8 3870 3870 3870 3870 3870 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.34 0.600 0.19 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.04 / 0.10 / 8 7 3871 3871 3871 3871 3871 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.93 0.600 0.98 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.16 / 0.24 / 8 7 3872 3872 3872 3872 3872 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.67 0.600 2.04 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.31 / 0.39 / 8 7 3873 TOP : Longitudinal direction - Only minimum steel required. 3873 BOTT: Longitudinal direction - Only minimum steel required. 3873 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 299 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3873 BOTT: Transverse direction - Only minimum steel required. 3873 TOP : 0.600 2.61 / 8 0.600 0.46 / BOTT: 0.600 3.35 / 7 0.600 0.52 / 300 8 7 3874 3874 3874 3874 3874 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.72 0.600 3.93 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.49 / 0.40 / 7 8 3875 3875 3875 3875 3875 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.99 0.600 2.30 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 0.14 / 7 8 3876 3876 3876 3876 3876 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.07 0.600 1.17 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.10 / 7 8 3877 3877 3877 3877 3877 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.37 0.600 0.31 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.05 / 7 8 3878 3878 3878 3878 3878 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.38 0.600 0.26 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.01 / 0.02 / 8 7 3879 3879 3879 3879 3879 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.01 0.600 0.95 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.06 / 0.07 / 8 7 3880 3880 3880 3880 3880 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.77 0.600 1.79 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 0.11 / 8 7 3881 TOP : Longitudinal direction - Only minimum steel required. 3881 BOTT: Longitudinal direction - Only minimum steel required. 3881 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 300 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3881 BOTT: Transverse direction - Only minimum steel required. 3881 TOP : 0.600 2.84 / 8 0.600 0.45 / BOTT: 0.600 3.06 / 7 0.600 0.32 / 301 8 7 3882 3882 3882 3882 3882 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.84 0.600 3.06 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.45 / 0.32 / 7 8 3883 3883 3883 3883 3883 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.77 0.600 1.79 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 0.11 / 7 8 3884 3884 3884 3884 3884 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.01 0.600 0.95 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.06 / 0.07 / 7 8 3885 3885 3885 3885 3885 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.38 0.600 0.26 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.01 / 0.02 / 7 8 3886 3886 3886 3886 3886 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.37 0.600 0.31 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.02 / 0.05 / 8 7 3887 3887 3887 3887 3887 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.07 0.600 1.17 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.07 / 0.10 / 8 7 3888 3888 3888 3888 3888 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.99 0.600 2.30 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.14 / 0.14 / 8 7 3889 TOP : Longitudinal direction - Only minimum steel required. 3889 BOTT: Longitudinal direction - Only minimum steel required. 3889 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 301 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3889 BOTT: Transverse direction - Only minimum steel required. 3889 TOP : 0.600 3.72 / 8 0.600 0.49 / BOTT: 0.600 3.93 / 7 0.600 0.40 / 302 8 7 3890 3890 3890 3890 3890 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 19.57 0.600 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 8.93 / 8 8 3891 3891 3891 3891 3891 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 8.84 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 27.99 / 8 8 3892 3892 3892 3892 3892 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 12.03 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 44.91 / 8 8 3893 3893 3893 3893 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 12.58 / 8 0.652 54.68 / 8 8 3894 3894 3894 3894 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 13.13 / 8 0.665 55.81 / 8 8 3895 3895 3895 3895 3895 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 10.77 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 46.57 / 8 8 3896 3896 3896 3896 3896 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.97 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 26.74 / 8 8 3897 3897 3897 3897 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 302 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3897 TOP : BOTT: -- PAGE NO. 0.600 0.600 13.87 / 0.00 / 9 9 0.600 0.600 303 1.89 / 6.56 / 7 8 3898 3898 3898 3898 3898 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 13.87 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.89 / 6.56 / 8 7 3899 3899 3899 3899 3899 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.97 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 26.74 / 8 7 3900 3900 3900 3900 3900 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 10.77 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 46.57 / 8 7 3901 3901 3901 3901 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 13.13 / 7 0.665 55.81 / 8 7 3902 3902 3902 3902 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 9 0.600 0.00 / BOTT: 0.600 12.58 / 7 0.652 54.68 / 8 7 3903 3903 3903 3903 3903 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 12.03 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 44.91 / 8 7 3904 3904 3904 3904 3904 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 8.84 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 27.99 / 8 7 3905 3905 3905 3905 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 303 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 3905 TOP : BOTT: -- PAGE NO. 0.600 0.600 19.57 / 0.00 / 9 9 0.600 0.600 304 0.00 / 8.93 / 8 7 3906 3906 3906 3906 3906 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 44.40 0.600 0.00 / / Only Only Only Only 9 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.14 / 0.03 / 8 9 3907 3907 3907 3907 3907 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.58 0.600 17.10 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 30.10 / 8 9 3908 3908 3908 3908 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 21.35 / 9 0.610 51.22 / 8 9 3909 3909 3909 3909 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 18.82 / 9 0.699 58.58 / 8 9 3910 3910 3910 3910 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 17.79 / 9 0.681 57.09 / 8 9 3911 3911 3911 3911 3911 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 18.39 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 48.18 / 8 9 3912 3912 3912 3912 3912 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 13.92 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 29.20 / 8 9 3913 3913 3913 3913 3913 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.30 0.600 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 3.61 / 8 9 C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 304 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 305 3914 3914 3914 3914 3914 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 29.30 0.600 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 3.61 / 8 9 3915 3915 3915 3915 3915 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 13.92 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 29.20 / 8 9 3916 3916 3916 3916 3916 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 18.39 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 48.18 / 8 9 3917 3917 3917 3917 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 17.79 / 9 0.681 57.09 / 8 9 3918 3918 3918 3918 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 18.82 / 9 0.699 58.58 / 8 9 3919 3919 3919 3919 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. TOP : Transverse direction - Only minimum steel required. TOP : 0.600 0.00 / 8 0.600 0.00 / BOTT: 0.600 21.35 / 9 0.610 51.22 / 8 9 3920 3920 3920 3920 3920 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.58 0.600 17.10 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 30.10 / 8 9 3921 3921 3921 3921 3921 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 44.40 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.14 / 0.03 / 7 9 3922 TOP : Longitudinal direction - Only minimum steel required. 3922 BOTT: Longitudinal direction - Only minimum steel required. 3922 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 305 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3922 BOTT: Transverse direction - Only minimum steel required. 3922 TOP : 0.600 41.54 / 9 0.600 13.34 / BOTT: 0.600 0.00 / 8 0.600 5.04 / 306 8 7 3923 3923 3923 3923 3923 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.91 0.600 11.88 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.28 / 20.38 / 8 7 3924 3924 3924 3924 3924 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.14 0.600 12.57 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.25 / 19.70 / 8 7 3925 3925 3925 3925 3925 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.10 0.600 10.42 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.35 / 18.58 / 8 9 3926 3926 3926 3926 3926 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 10.01 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 16.63 / 18.22 / 8 9 3927 3927 3927 3927 3927 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.12 0.600 11.56 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.82 / 17.30 / 8 9 3928 3928 3928 3928 3928 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.28 0.600 8.42 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.81 / 7.71 / 8 9 3929 3929 3929 3929 3929 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.71 0.600 5.65 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.62 / 0.00 / 7 9 3930 TOP : Longitudinal direction - Only minimum steel required. 3930 BOTT: Longitudinal direction - Only minimum steel required. 3930 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 306 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3930 BOTT: Transverse direction - Only minimum steel required. 3930 TOP : 0.600 33.71 / 8 0.600 18.62 / BOTT: 0.600 5.65 / 7 0.600 0.00 / 307 8 9 3931 3931 3931 3931 3931 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 2.28 0.600 8.42 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 17.81 / 7.71 / 7 9 3932 3932 3932 3932 3932 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.12 0.600 11.56 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 15.82 / 17.30 / 7 9 3933 3933 3933 3933 3933 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 10.01 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 16.63 / 18.22 / 7 9 3934 3934 3934 3934 3934 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.10 0.600 10.42 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 18.35 / 18.58 / 7 9 3935 3935 3935 3935 3935 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.14 0.600 12.57 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.25 / 19.70 / 7 8 3936 3936 3936 3936 3936 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 3.91 0.600 11.88 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 19.28 / 20.38 / 7 8 3937 3937 3937 3937 3937 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 41.54 0.600 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 13.34 / 5.04 / 7 8 3938 TOP : Longitudinal direction - Only minimum steel required. 3938 BOTT: Longitudinal direction - Only minimum steel required. 3938 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 307 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3938 BOTT: Transverse direction - Only minimum steel required. 3938 TOP : 0.600 36.92 / 7 0.600 10.21 / BOTT: 0.600 0.00 / 8 0.600 12.14 / 308 7 8 3939 3939 3939 3939 3939 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.04 0.600 5.48 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.42 / 19.44 / 7 8 3940 3940 3940 3940 3940 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.79 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.99 / 17.42 / 7 8 3941 3941 3941 3941 3941 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.04 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.54 / 15.12 / 9 8 3942 3942 3942 3942 3942 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.32 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.42 / 14.12 / 9 8 3943 3943 3943 3943 3943 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.45 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 15.89 / 9 8 3944 3944 3944 3944 3944 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.45 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 15.89 / 9 7 3945 3945 3945 3945 3945 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.32 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.42 / 14.12 / 9 7 3946 TOP : Longitudinal direction - Only minimum steel required. 3946 BOTT: Longitudinal direction - Only minimum steel required. 3946 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 308 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3946 BOTT: Transverse direction - Only minimum steel required. 3946 TOP : 0.600 0.00 / 7 0.600 3.54 / BOTT: 0.600 4.04 / 7 0.600 15.12 / 309 9 7 3947 3947 3947 3947 3947 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 4.79 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 3.99 / 17.42 / 8 7 3948 3948 3948 3948 3948 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.04 0.600 5.48 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.42 / 19.44 / 8 7 3949 3949 3949 3949 3949 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 36.92 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 10.21 / 12.14 / 8 7 3950 3950 3950 3950 3950 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.46 0.600 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 10.72 / 0.00 / 7 7 3951 3951 3951 3951 3951 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.42 0.600 2.05 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.54 / 0.00 / 7 7 3952 3952 3952 3952 3952 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.67 0.600 1.86 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.15 / 0.81 / 9 8 3953 3953 3953 3953 3953 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 1.31 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.87 / 0.99 / 9 8 3954 TOP : Longitudinal direction - Only minimum steel required. 3954 BOTT: Longitudinal direction - Only minimum steel required. 3954 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 309 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3954 BOTT: Transverse direction - Only minimum steel required. 3954 TOP : 0.600 0.00 / 7 0.600 1.31 / BOTT: 0.600 2.48 / 7 0.600 0.91 / 310 9 8 3955 3955 3955 3955 3955 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.94 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.40 / 9 7 3956 3956 3956 3956 3956 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.94 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.00 / 2.40 / 9 8 3957 3957 3957 3957 3957 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 2.48 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.31 / 0.91 / 9 7 3958 3958 3958 3958 3958 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 1.31 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.87 / 0.99 / 9 7 3959 3959 3959 3959 3959 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 1.67 0.600 1.86 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 5.15 / 0.81 / 9 7 3960 3960 3960 3960 3960 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 8.42 0.600 2.05 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 8.54 / 0.00 / 8 7 3961 3961 3961 3961 3961 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 33.46 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 10.72 / 0.00 / 8 7 3962 TOP : Longitudinal direction - Only minimum steel required. 3962 BOTT: Longitudinal direction - Only minimum steel required. 3962 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 310 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3962 BOTT: Transverse direction - Only minimum steel required. 3962 TOP : 0.600 18.09 / 7 0.600 2.17 / BOTT: 0.600 0.00 / 7 0.600 0.00 / 311 7 7 3963 3963 3963 3963 3963 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.73 0.600 0.15 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.76 / 0.00 / 7 7 3964 3964 3964 3964 3964 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.72 0.600 0.97 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.92 / 0.00 / 9 7 3965 3965 3965 3965 3965 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.56 0.600 0.66 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.05 / 0.00 / 9 7 3966 3966 3966 3966 3966 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 1.47 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.50 / 0.00 / 9 7 3967 3967 3967 3967 3967 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.72 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.23 / 0.45 / 8 7 3968 3968 3968 3968 3968 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 0.72 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.23 / 0.45 / 7 8 3969 3969 3969 3969 3969 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 0.00 0.600 1.47 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 0.50 / 0.00 / 9 8 3970 TOP : Longitudinal direction - Only minimum steel required. 3970 BOTT: Longitudinal direction - Only minimum steel required. 3970 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 311 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3970 BOTT: Transverse direction - Only minimum steel required. 3970 TOP : 0.600 0.56 / 9 0.600 1.05 / BOTT: 0.600 0.66 / 7 0.600 0.00 / 312 9 8 3971 3971 3971 3971 3971 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 4.72 0.600 0.97 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.92 / 0.00 / 9 8 3972 3972 3972 3972 3972 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 12.73 0.600 0.15 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 1.76 / 0.00 / 8 8 3973 3973 3973 3973 3973 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.600 18.09 0.600 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.600 0.600 required. required. required. required. 2.17 / 0.00 / 8 8 3974 3974 3974 3974 3974 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.93 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 4.45 / 8 9 3975 3975 3975 3975 3975 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.35 0.400 0.45 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 8.08 / 8 9 3976 3976 3976 3976 3976 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.80 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 10.87 / 8 9 3977 3977 3977 3977 3977 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.80 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 10.87 / 8 9 3978 TOP : Longitudinal direction - Only minimum steel required. 3978 BOTT: Longitudinal direction - Only minimum steel required. 3978 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 312 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3978 BOTT: Transverse direction - Only minimum steel required. 3978 TOP : 0.400 0.35 / 7 0.400 0.00 / BOTT: 0.400 0.45 / 8 0.400 8.08 / 313 8 9 3979 3979 3979 3979 3979 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.93 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 4.45 / 8 9 3980 3980 3980 3980 3980 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.13 0.400 4.23 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.22 / 0.00 / 9 9 3981 3981 3981 3981 3981 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 4.16 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 5.52 / 0.00 / 9 9 3982 3982 3982 3982 3982 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 6.13 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 7.51 / 0.00 / 9 9 3983 3983 3983 3983 3983 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 6.13 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 7.51 / 0.00 / 9 9 3984 3984 3984 3984 3984 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 4.16 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 5.52 / 0.00 / 9 9 3985 3985 3985 3985 3985 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.13 0.400 4.23 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.22 / 0.00 / 9 9 3986 TOP : Longitudinal direction - Only minimum steel required. 3986 BOTT: Longitudinal direction - Only minimum steel required. 3986 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 313 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3986 BOTT: Transverse direction - Only minimum steel required. 3986 TOP : 0.400 0.53 / 8 0.400 0.17 / BOTT: 0.400 6.71 / 7 0.400 0.78 / 314 8 7 3987 3987 3987 3987 3987 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 4.47 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.38 / 0.00 / 9 7 3988 3988 3988 3988 3988 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 8.33 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.28 / 0.00 / 9 7 3989 3989 3989 3989 3989 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 8.33 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.28 / 0.00 / 9 7 3990 3990 3990 3990 3990 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 4.47 0.400 0.00 / / Only Only Only Only 9 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.38 / 0.00 / 9 7 3991 3991 3991 3991 3991 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.53 0.400 6.71 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.17 / 0.78 / 7 8 3992 3992 3992 3992 3992 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.85 0.400 0.60 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.88 / 0.00 / 9 8 3993 3993 3993 3993 3993 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.32 0.400 0.04 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 3.08 / 0.00 / 9 8 3994 TOP : Longitudinal direction - Only minimum steel required. 3994 BOTT: Longitudinal direction - Only minimum steel required. 3994 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 314 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 3994 BOTT: Transverse direction - Only minimum steel required. 3994 TOP : 0.400 0.00 / 8 0.400 1.78 / BOTT: 0.400 1.12 / 9 0.400 0.00 / 315 9 8 3995 3995 3995 3995 3995 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.12 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.78 / 0.00 / 9 8 3996 3996 3996 3996 3996 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.32 0.400 0.04 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 3.08 / 0.00 / 9 8 3997 3997 3997 3997 3997 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.85 0.400 0.60 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.88 / 0.00 / 9 8 3998 3998 3998 3998 3998 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 5.50 0.400 2.42 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.11 / 0.81 / 7 8 3999 3999 3999 3999 3999 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.67 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 2.51 / 7 9 4000 4000 4000 4000 4000 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.07 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 1.93 / 7 9 4001 4001 4001 4001 4001 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.07 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 1.93 / 7 9 4002 TOP : Longitudinal direction - Only minimum steel required. 4002 BOTT: Longitudinal direction - Only minimum steel required. 4002 TOP : Transverse direction - Only minimum steel required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 315 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 4002 BOTT: Transverse direction - Only minimum steel required. 4002 TOP : 0.400 0.00 / 8 0.400 0.00 / BOTT: 0.400 2.67 / 9 0.400 2.51 / 316 7 9 4003 4003 4003 4003 4003 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 5.50 0.400 2.42 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.11 / 0.81 / 8 7 4004 4004 4004 4004 4004 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 5.15 0.400 2.72 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.42 / 0.51 / 8 7 4005 4005 4005 4005 4005 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.73 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.96 / 8 7 4006 4006 4006 4006 4006 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.73 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.96 / 8 8 4007 4007 4007 4007 4007 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 5.15 0.400 2.72 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.42 / 0.51 / 7 8 4008 4008 4008 4008 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 2.82 / 7 0.417 19.80 / BOTT: 0.400 0.00 / 8 0.400 0.00 / 7 8 4009 4009 4009 4009 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 4.77 / 7 0.478 22.59 / BOTT: 0.400 1.15 / 8 0.400 0.00 / 7 8 4010 4010 4010 4010 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel required. required. required. required. Page 316 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 4010 TOP : BOTT: -- PAGE NO. 0.400 0.400 2.21 / 0.10 / 7 8 0.400 0.400 317 18.90 / 0.00 / 7 8 4011 4011 4011 4011 4011 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.08 0.400 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 16.24 / 0.00 / 7 8 4012 4012 4012 4012 4012 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.64 0.400 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 14.69 / 0.00 / 7 8 4013 4013 4013 4013 4013 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.93 0.400 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 14.12 / 0.00 / 7 8 4014 4014 4014 4014 4014 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.09 0.400 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 14.35 / 0.00 / 9 8 4015 4015 4015 4015 4015 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 4.97 0.400 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 15.77 / 0.00 / 7 8 4016 4016 4016 4016 4016 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 4.97 0.400 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 15.77 / 0.00 / 8 8 4017 4017 4017 4017 4017 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.09 0.400 0.00 / / Only Only Only Only 9 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 14.35 / 0.00 / 9 8 4018 4018 4018 4018 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 317 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 4018 TOP : BOTT: -- PAGE NO. 0.400 0.400 0.93 / 0.00 / 7 8 0.400 0.400 318 14.12 / 0.00 / 8 8 4019 4019 4019 4019 4019 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.64 0.400 0.00 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 14.69 / 0.00 / 8 8 4020 4020 4020 4020 4020 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.08 0.400 0.00 / / Only Only Only Only 8 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 16.24 / 0.00 / 8 8 4021 4021 4021 4021 4021 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.21 0.400 0.10 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 18.90 / 0.00 / 8 8 4022 4022 4022 4022 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 4.77 / 8 0.478 22.59 / BOTT: 0.400 1.15 / 7 0.400 0.00 / 8 8 4023 4023 4023 4023 TOP : Longitudinal direction - Only minimum steel required. BOTT: Longitudinal direction - Only minimum steel required. BOTT: Transverse direction - Only minimum steel required. TOP : 0.400 2.82 / 8 0.417 19.80 / BOTT: 0.400 0.00 / 7 0.400 0.00 / 8 8 4024 4024 4024 4024 4024 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.66 0.400 0.97 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 5.41 / 0.00 / 7 8 4025 4025 4025 4025 4025 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.91 0.400 3.93 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 4.02 / 0.65 / 7 8 4026 4026 4026 4026 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 318 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 4026 TOP : BOTT: -- PAGE NO. 0.400 0.400 0.16 / 3.60 / 7 8 0.400 0.400 319 3.08 / 1.70 / 7 8 4027 4027 4027 4027 4027 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 3.16 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.24 / 1.70 / 7 8 4028 4028 4028 4028 4028 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.60 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.51 / 1.22 / 7 8 4029 4029 4029 4029 4029 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 1.78 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.27 / 0.45 / 7 8 4030 4030 4030 4030 4030 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.56 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.51 / 0.00 / 7 8 4031 4031 4031 4031 4031 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.24 0.400 0.00 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.18 / 0.00 / 7 8 4032 4032 4032 4032 4032 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.24 0.400 0.00 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.18 / 0.00 / 8 8 4033 4033 4033 4033 4033 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.56 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.51 / 0.00 / 8 8 4034 4034 4034 4034 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 319 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 4034 TOP : BOTT: -- PAGE NO. 0.400 0.400 0.00 / 1.78 / 7 7 0.400 0.400 320 1.27 / 0.45 / 8 7 4035 4035 4035 4035 4035 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.60 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.51 / 1.22 / 8 7 4036 4036 4036 4036 4036 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 3.16 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 2.24 / 1.70 / 8 7 4037 4037 4037 4037 4037 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.16 0.400 3.60 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 3.08 / 1.70 / 8 7 4038 4038 4038 4038 4038 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.91 0.400 3.93 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 4.02 / 0.65 / 8 7 4039 4039 4039 4039 4039 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.66 0.400 0.97 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 5.41 / 0.00 / 8 7 4040 4040 4040 4040 4040 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.03 0.400 1.31 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.13 / 0.01 / 7 8 4041 4041 4041 4041 4041 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.40 0.400 3.86 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.54 / 0.39 / 7 8 4042 4042 4042 4042 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 320 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 4042 TOP : BOTT: -- PAGE NO. 0.400 0.400 0.27 / 4.65 / 7 8 0.400 0.400 321 0.32 / 0.71 / 7 8 4043 4043 4043 4043 4043 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 4.34 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.17 / 0.84 / 7 8 4044 4044 4044 4044 4044 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 3.61 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.04 / 0.73 / 7 8 4045 4045 4045 4045 4045 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 2.49 / / Only Only Only Only 7 8 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.50 / 7 8 4046 4046 4046 4046 4046 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.76 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.24 / 7 8 4047 4047 4047 4047 4047 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.24 0.400 0.00 / / Only Only Only Only 8 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.20 / 0.04 / 8 7 4048 4048 4048 4048 4048 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.24 0.400 0.00 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.20 / 0.04 / 7 8 4049 4049 4049 4049 4049 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 0.76 / / Only Only Only Only 7 9 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.00 / 0.24 / 7 7 4050 4050 4050 4050 TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction - Only Only Only Only minimum minimum minimum minimum required. required. required. required. C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl steel steel steel steel Page 321 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE 4050 TOP : BOTT: -- PAGE NO. 0.400 0.400 0.00 / 2.49 / 7 7 0.400 0.400 322 0.00 / 0.50 / 7 7 4051 4051 4051 4051 4051 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 3.61 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.04 / 0.73 / 8 7 4052 4052 4052 4052 4052 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.00 0.400 4.34 / / Only Only Only Only 7 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.17 / 0.84 / 8 7 4053 4053 4053 4053 4053 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 0.27 0.400 4.65 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.32 / 0.71 / 8 7 4054 4054 4054 4054 4054 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 1.40 0.400 3.86 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 0.54 / 0.39 / 8 7 4055 4055 4055 4055 4055 TOP : BOTT: TOP : BOTT: TOP : BOTT: Longitudinal direction Longitudinal direction Transverse direction Transverse direction 0.400 2.03 0.400 1.31 / / Only Only Only Only 8 7 minimum steel minimum steel minimum steel minimum steel 0.400 0.400 required. required. required. required. 1.13 / 0.01 / 8 7 ***************************END OF ELEMENT DESIGN*************************** 1426. CONCRETE TAKE 1427. END CONCRETE DESIGN C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 322 of 323 Monday, June 28, 2010, 01:13 PM STAAD SPACE -- PAGE NO. 323 ************** CONCRETE TAKE OFF ************** (FOR BEAMS AND COLUMNS DESIGNED ABOVE) TOTAL VOLUME OF CONCRETE = 502.17 CU.FT BAR SIZE NUMBER -------12 WEIGHT (in lbs) -------3350.08 -----------*** TOTAL= 3350.08 1428. FINISH *********** END OF THE STAAD.Pro RUN *********** **** DATE= JUN 28,2010 TIME= 13:13: 6 **** ********************************************************* * For questions on STAAD.Pro, please contact : * * By Email - North America : support@reiusa.com * * By Email - International : support@reiworld.com * * Tel. (USA) : 714-974-2500 ; Fax (USA) : 714-974-4771 * ********************************************************* C:\Staad2010\AyMA\Matamoros\Floculador\Floculador.anl Page 323 of 323 Job No Sheet No Rev 2 Part Software licensed to (ñ Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 13:12 Reaction Summary Node Max FX Min FX Max FY Min FY Max FZ Min FZ Max MX Min MX Max MY Min MY Max MZ Min MZ 1373 1280 1279 355 1372 1373 1 1 1373 1372 1 1 Print Time/Date: 10/08/2010 16:47 L/C Horizontal FX (kg) 10:TREN IZQUIERDO LLENO 767.382 10:TREN IZQUIERDO LLENO -186.348 9:TANQUE LLENO153.653 10:TREN IZQUIERDO -34.186 LLENO 9:TANQUE LLENO-171.393 9:TANQUE LLENO-171.392 9:TANQUE LLENO 46.224 9:TANQUE LLENO 46.224 9:TANQUE LLENO-171.392 9:TANQUE LLENO-171.393 9:TANQUE LLENO 46.224 9:TANQUE LLENO 46.224 Vertical FY (kg) 16.1E 3 16.7E 3 62.9E 1.81E 51.6E 51.6E 15.7E 15.7E 51.6E 51.6E 15.7E 15.7E 3 3 3 3 3 3 3 3 3 3 Horizontal FZ MX (kg) (MTon-m) -1.344 -186.075 108.384 -16.881 442.531 -442.531 130.726 130.726 -442.531 442.531 130.726 130.726 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 STAAD.Pro for Windows Release 2003 Moment MY (MTon-m) 0.049 -0.125 0.002 0.000 -0.129 0.129 0.000 0.000 0.129 -0.129 0.000 0.000 MZ (MTon-m) 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 Print Run 2 of 2 Job No Sheet No Rev 1 Part Software licensed to (ñ Job Title Ref By Client File Date23-Jun-10 Date/Time Floculador.std Chd 25-Jun-2010 17:45 Plate Centre Stress Summary Plate Max Qx Max Qy Max Sx Max Sy Max Sxy Max Mx Max My Max Mxy 3602 3131 4045 3115 3115 3602 3131 3104 L/C Shear Qx Qy (kg/cm2) (kg/cm2) 7:TREN IZQUIERDO-2.077 LLENO 7:TREN IZQUIERDO 0.711 LLENO 9:TANQUE LLENO -0.050 9:TANQUE LLENO 0.560 9:TANQUE LLENO 0.560 7:TREN IZQUIERDO-2.077 LLENO 7:TREN IZQUIERDO 0.711 LLENO 7:TREN IZQUIERDO-0.825 LLENO 0.589 -4.861 0.032 -1.910 -1.910 0.589 -4.861 1.613 Sx (kg/cm2) Membrane Sy (kg/cm2) 7.633 -0.646 -34.741 19.068 19.068 7.633 -0.646 11.642 -2.276 0.687 -0.115 27.567 27.567 -2.276 0.687 2.572 Bending Sxy Mx My Mxy (kg/cm2) (MTon-m/m) (MTon-m/m) (MTon-m/m) 10.835 0.776 0.316 -21.230 -21.230 10.835 0.776 1.426 -1.235 1.224 -0.216 0.492 0.492 -1.235 1.224 0.226 -0.815 7.379 -0.054 2.804 2.804 -0.815 7.379 1.961 -0.335 0.085 0.122 -0.059 -0.059 -0.335 0.085 0.906 Plate Centre Principal Stress Summary Plate Max (t) Max (b) Max VM (t) Max VM (b) Tresca (t) Tresca (b) 3131 3131 3131 3131 3101 3131 Print Time/Date: 25/06/2010 17:48 L/C Principal Top Bottom (kg/cm2) (kg/cm2) 7:TREN IZQUIERDO LLENO 111.411 7:TREN IZQUIERDO 111.411 LLENO 7:TREN IZQUIERDO 111.411 LLENO 7:TREN IZQUIERDO 111.411 LLENO 8:TREN DERECHO111.411 LLENO 7:TREN IZQUIERDO 111.411 LLENO 109.996 109.996 109.996 109.996 109.996 109.996 Von Mis Top Bottom (kg/cm2) (kg/cm2) 103.715 103.715 103.715 103.715 103.715 103.715 101.835 101.835 101.835 101.835 101.835 101.835 STAAD.Pro for Windows Release 2003 Tresca Top Bottom (kg/cm2) (kg/cm2) 93.750 93.750 93.750 93.750 93.750 93.750 90.999 90.999 90.999 90.999 90.999 90.999 Print Run 1 of 1 Job No Sheet No Rev 1 Part Software licensed to (ñ Job Title Ref By Client File Date23-Jun-10 Date/Time Floculador.std Chd 25-Jun-2010 17:55 Plate Centre Stress Summary Plate Max Qx Max Qy Max Sx Max Sy Max Sxy Max Mx Max My Max Mxy 2929 3321 3396 3804 3396 2929 3321 3446 L/C Shear Qx Qy (kg/cm2) (kg/cm2) 7:TREN IZQUIERDO 5.400 LLENO 7:TREN IZQUIERDO 0.212 LLENO 9:TANQUE LLENO 0.000 7:TREN IZQUIERDO 0.039 LLENO 9:TANQUE LLENO 0.000 7:TREN IZQUIERDO 5.400 LLENO 7:TREN IZQUIERDO 0.212 LLENO 9:TANQUE LLENO -0.530 0.321 5.665 -0.000 -0.040 -0.000 0.321 5.665 2.217 Sx (kg/cm2) Membrane Sy (kg/cm2) -1.230 1.721 24.782 -2.848 24.782 -1.230 1.721 1.783 0.183 -6.325 9.023 -9.973 9.023 0.183 -6.325 -3.935 Bending Sxy Mx My Mxy (kg/cm2) (MTon-m/m) (MTon-m/m) (MTon-m/m) -0.801 1.176 -14.229 0.411 -14.229 -0.801 1.176 -0.776 -9.235 -1.067 0.000 0.064 0.000 -9.235 -1.067 0.565 -1.011 -8.459 -0.000 0.246 -0.000 -1.011 -8.459 0.926 0.276 0.159 0.000 0.032 0.000 0.276 0.159 -3.637 Plate Centre Principal Stress Summary Plate Max (t) Max (b) Max VM (t) Max VM (b) Tresca (t) Tresca (b) 2929 3321 3321 3321 3321 3321 Print Time/Date: 25/06/2010 17:56 L/C Principal Top Bottom (kg/cm2) (kg/cm2) 7:TREN IZQUIERDO62.819 LLENO 8:TREN DERECHO 50.069 LLENO 7:TREN IZQUIERDO62.806 LLENO 8:TREN DERECHO 50.069 LLENO 7:TREN IZQUIERDO62.806 LLENO 8:TREN DERECHO 50.069 LLENO 60.469 62.806 50.069 62.806 50.069 62.806 Von Mis Top Bottom (kg/cm2) (kg/cm2) 59.819 46.289 60.329 46.289 60.329 46.289 57.376 60.329 46.289 60.329 46.289 60.329 STAAD.Pro for Windows Release 2003 Tresca Top Bottom (kg/cm2) (kg/cm2) 56.282 41.236 57.501 41.236 57.501 41.236 53.678 57.501 41.236 57.501 41.236 57.501 Print Run 1 of 1 Job No Sheet No Rev 1 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Job Information Engineer Name: Date: Checked Approved 23-Jun-10 Structure Type SPACE FRAME Number of Nodes Number of Elements Number of Plates 1374 2717 1338 Highest Node Highest Beam Highest Plate Number of Basic Load Cases Number of Combination Load Cases 1374 2717 4055 12 0 Included in this printout are data for: 2655 TO 2675, 2679 TO 2699 Beams Included in this printout are results for load cases: Type L/C Primary Primary Primary 7 8 9 Name TREN IZQUIERDO LLENO TREN DERECHO LLENO TANQUE LLENO Beam Maximum Forces by Section Property Section Rect 0.20x1.00 Print Time/Date: 28/06/2010 11:04 Max +ve Max -ve Axial Max Fx (kg) Shear Max Fy Max Fz (kg) (kg) 3.21E 3 -6.86E 3 2.94E 3 -114.895 15.8E 3 -15.8E 3 Torsion Max Mx (MTon-m) 0.832 -0.832 Bending Max My Max Mz (MTon-m) (MTon-m) 8.831 -8.831 3.939 -0.242 STAAD.Pro for Windows Release 2003 Print Run 1 of 10 Job No Sheet No Rev 2 Part Software licensed to Job Title Ref By Client File Beam Maximum Moments Distances to maxima are given from beam end A. Length L/C Beam Node A (m) 2655 2656 2657 2658 2659 1299 1316 1333 1300 1317 Print Time/Date: 28/06/2010 11:04 1.000 1.000 1.000 1.000 1.000 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve d (m) 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 Max My (MTon-m) 7.134 -3.644 5.736 -3.324 6.940 -3.933 6.805 -8.575 5.279 -6.172 6.965 -8.831 6.891 -5.224 4.945 -3.561 7.027 -5.297 4.500 -1.094 3.924 -1.948 4.418 -1.626 5.099 -5.007 4.169 -3.853 5.304 -5.299 d (m) Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Max Mz (MTon-m) 0.000 3.939 0.000 1.954 0.000 3.140 0.000 0.982 0.000 1.000 0.000 0.077 -0.105 0.519 0.000 0.288 0.000 0.000 -0.112 0.078 0.000 3.510 0.000 1.000 0.000 2.089 -0.193 2.909 0.000 0.766 1.000 0.000 -0.183 0.388 STAAD.Pro for Windows Release 2003 Print Run 2 of 10 Job No Sheet No Rev 3 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Beam Maximum Moments Cont... Beam Node A 2660 1334 2661 2662 2663 2664 2665 1301 1318 1335 1302 1319 Print Time/Date: 28/06/2010 11:04 Length (m) 1.000 1.000 1.000 1.000 1.000 1.000 L/C 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve d (m) 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 Max My (MTon-m) 5.181 -3.395 3.928 -2.451 5.378 -3.516 3.293 -0.553 2.872 -1.535 3.305 -1.129 3.390 -2.833 3.013 -2.531 3.645 -3.161 3.207 -1.898 2.717 -1.569 3.457 -2.057 2.509 -0.178 1.891 -1.172 2.544 -0.772 1.746 d (m) Max Mz (MTon-m) 0.000 0.201 0.000 0.000 -0.149 0.029 0.000 3.142 0.000 1.000 0.000 2.214 -0.209 2.704 0.000 0.590 1.000 0.000 -0.242 0.299 0.000 0.136 0.000 1.000 0.000 0.000 -0.164 0.027 -0.002 2.913 0.000 1.000 0.000 2.313 -0.146 2.604 0.000 0.460 STAAD.Pro for Windows Release 2003 Print Run 3 of 10 Job No Sheet No Rev 4 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Beam Maximum Moments Cont... Beam 2666 2667 2668 2669 2670 Node A 1336 1303 1320 1337 1304 Print Time/Date: 28/06/2010 11:04 Length (m) 1.000 1.000 1.000 1.000 1.000 L/C Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve d (m) Max My (MTon-m) 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 -0.970 1.806 -1.381 2.011 -1.304 1.255 -0.570 1.444 -0.755 1.520 -0.740 1.776 1.000 0.000 1.000 0.000 0.000 d (m) Max Mz (MTon-m) 1.000 0.000 1.000 0.000 -0.239 0.245 -0.002 0.084 0.000 1.000 0.000 0.000 -0.159 0.021 -0.024 2.790 0.832 -0.787 1.743 -0.404 0.768 0.000 1.000 0.000 2.414 -0.043 2.599 0.000 0.378 1.000 0.000 0.000 0.605 -0.260 0.448 0.000 1.000 1.000 0.648 -0.536 0.206 0.000 1.000 0.000 1.000 1.000 0.043 -0.198 0.230 -0.020 0.059 0.000 1.000 1.000 0.487 -0.289 0.830 0.000 1.000 0.000 0.000 -0.139 0.008 -0.040 2.766 STAAD.Pro for Windows Release 2003 Print Run 4 of 10 Job No Sheet No Rev 5 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Beam Maximum Moments Cont... Beam 2671 2672 2673 Node A 1321 1338 1305 Length (m) 1.000 1.000 1.000 2674 1322 1.000 2675 1339 1.000 Print Time/Date: 28/06/2010 11:04 L/C 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve d (m) Max My (MTon-m) 1.000 1.000 -0.394 0.600 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 2.392 -1.074 0.845 -0.399 2.085 -0.874 1.698 -1.924 0.738 -0.715 1.534 -1.652 2.347 -0.380 1.554 -1.569 2.236 -0.887 3.753 -1.608 1.677 -0.525 3.350 -1.261 2.130 -2.221 0.763 d (m) Max Mz (MTon-m) 0.000 2.538 0.000 2.702 0.000 0.344 0.000 1.000 0.000 1.000 1.000 0.140 -0.153 0.252 -0.059 0.025 0.000 -0.108 0.000 0.000 -0.053 2.954 0.000 2.823 0.000 3.005 0.000 1.000 0.000 1.000 0.000 1.000 0.363 -0.072 0.288 -0.176 0.294 -0.160 0.000 -0.045 STAAD.Pro for Windows Release 2003 Print Run 5 of 10 Job No Sheet No Rev 6 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Beam Maximum Moments Cont... Beam 2679 Node A 1307 Length (m) 1.000 2680 1324 1.000 2681 1341 1.000 2682 2683 1308 1325 Print Time/Date: 28/06/2010 11:04 1.000 1.000 L/C Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve d (m) Max My (MTon-m) 1.000 0.000 1.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 -0.470 1.784 -1.656 1.569 -1.554 0.380 -2.347 0.887 -2.236 0.525 -1.677 1.608 -3.753 1.261 -3.350 0.470 -0.763 2.221 -2.130 1.656 -1.784 0.394 1.000 -0.830 1.000 1.000 0.000 1.000 0.000 -0.600 0.399 -0.845 1.074 -2.392 d (m) Max Mz (MTon-m) 1.000 -0.100 0.000 0.000 -0.072 2.823 0.000 2.954 0.000 3.005 0.000 1.000 0.000 1.000 0.000 1.000 0.288 -0.176 0.363 -0.072 0.294 -0.160 1.000 -0.100 0.000 -0.045 0.000 0.000 -0.072 2.538 0.000 2.766 0.000 2.702 0.000 1.000 0.000 0.140 -0.153 0.344 STAAD.Pro for Windows Release 2003 Print Run 6 of 10 Job No Sheet No Rev 7 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Beam Maximum Moments Cont... Beam 2684 2685 2686 2687 2688 Node A 1342 1309 1326 1343 1310 Print Time/Date: 28/06/2010 11:04 Length (m) 1.000 1.000 1.000 1.000 1.000 L/C 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve d (m) Max My (MTon-m) 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 0.000 1.000 0.874 -2.085 0.715 -0.738 1.924 -1.698 1.652 -1.534 0.787 -0.832 1.000 0.000 1.000 0.000 1.000 -1.776 0.404 -1.743 0.260 -0.605 0.000 -0.768 0.000 -0.448 1.000 1.000 0.000 1.000 0.000 0.000 1.000 0.000 1.000 0.000 -0.206 0.536 -0.648 0.289 -0.487 1.172 -1.891 0.178 -2.509 0.772 d (m) Max Mz (MTon-m) 0.000 1.000 0.252 -0.059 0.000 1.000 -0.108 0.025 0.000 0.000 1.000 0.000 -0.053 2.414 -0.043 2.790 0.000 2.599 0.000 1.000 0.000 0.043 -0.198 0.378 0.000 1.000 0.230 -0.020 0.000 1.000 -0.139 0.059 1.000 0.000 0.000 1.000 0.000 0.008 -0.040 2.313 -0.146 2.913 0.000 2.604 STAAD.Pro for Windows Release 2003 Print Run 7 of 10 Job No Sheet No Rev 8 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Beam Maximum Moments Cont... Beam Node A 2689 1327 2690 2691 2692 2693 1344 1311 1328 1345 Print Time/Date: 28/06/2010 11:04 Length (m) 1.000 1.000 1.000 1.000 1.000 L/C Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve d (m) 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 Max My (MTon-m) -2.544 1.381 -1.806 0.970 -1.746 1.304 -2.011 0.755 -1.444 0.570 -1.255 0.740 -1.520 1.535 -2.872 0.553 -3.293 1.129 -3.305 2.531 -3.013 2.833 -3.390 3.161 -3.645 1.569 -2.717 1.898 -3.207 2.057 -3.457 d (m) Max Mz (MTon-m) 1.000 0.000 -0.239 0.460 0.000 1.000 0.245 -0.002 0.000 0.000 -0.159 0.084 1.000 0.000 0.000 1.000 0.000 0.021 -0.024 2.214 -0.209 3.142 0.000 2.704 1.000 0.000 -0.242 0.590 0.000 0.299 0.000 0.000 -0.164 0.136 1.000 0.000 0.027 -0.002 STAAD.Pro for Windows Release 2003 Print Run 8 of 10 Job No Sheet No Rev 9 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Beam Maximum Moments Cont... Beam Node A 2694 1312 2695 2696 2697 2698 2699 1329 1346 1313 1330 1347 Print Time/Date: 28/06/2010 11:04 Length (m) 1.000 1.000 1.000 1.000 1.000 1.000 L/C 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve 7:TREN IZQUIERDO Max LLENO -ve d (m) 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 1.000 0.000 Max My (MTon-m) 1.948 -3.924 1.094 -4.500 1.626 -4.418 3.853 -4.169 5.007 -5.099 5.299 -5.304 2.451 -3.928 3.395 -5.181 3.516 -5.378 3.324 -5.736 3.644 -7.134 3.933 -6.940 6.172 -5.279 8.575 -6.805 8.831 -6.965 3.561 d (m) Max Mz (MTon-m) 0.000 1.000 0.000 2.089 -0.193 3.510 0.000 2.909 1.000 0.000 -0.183 0.766 0.000 0.388 0.000 0.000 -0.149 0.201 0.000 0.029 0.000 1.954 0.000 3.939 0.000 3.140 0.000 1.000 0.000 0.077 -0.105 0.982 0.000 0.519 STAAD.Pro for Windows Release 2003 Print Run 9 of 10 Job No Sheet No Rev 10 Part Software licensed to Job Title Ref By Client File Date23-Jun-10 Floculador.std Date/Time Chd 28-Jun-2010 10:01 Beam Maximum Moments Cont... Beam Node A Length (m) L/C Max +ve 8:TREN DERECHO Max LLENO -ve Max +ve 9:TANQUE LLENO Max -ve Max +ve Print Time/Date: 28/06/2010 11:04 d (m) 1.000 0.000 1.000 0.000 1.000 Max My (MTon-m) -4.945 5.224 -6.891 5.297 -7.027 d (m) Max Mz (MTon-m) 0.000 0.000 -0.112 0.288 0.000 0.078 STAAD.Pro for Windows Release 2003 Print Run 10 of 10 HOJA BUFETE DE INGENIERÍA Y DISEÑO S.A. DE C.V. PROYECTO: DE Floculador SUBTITULO: Z-1 GRAL. SAN MARTIN 139 COL. AMERICANA GDL., JAL. TEL.: 36 15 95 26, 36 30 48 92 C.P.: 44140 CALCULÓ: JAGR ZAPATA CONCENTRICA P= M= qa = γs = H= F'c = γc = 30.40 Ton 0.00 Ton m 2 4.17 Ton/m 3 1500 Kg/m 2.00 m 2 200 Kg/cm 3 2400 Kg/m CAPACIDAD DE CARGA ρmin = Vol. m3 P Dado Losa * Relleno ΣF= e= qMAX = 0.27 2.70 0.00 ρmax = Fuerza Ton 30.40 0.65 6.48 0.00 37.53 qMIN = 0.00 m 2 4.17 Ton/m 2 4.17 Ton/m q= 2 4.17 Ton/m Muy = As = ρ= As1 = As1 = As1 = 3.00 m 3.00 m 0.40 m Y= h= r= FS = 0.40 m 0.30 m 5.00 cm 1.50 OK P DISEÑO POR FLEXIÓN 0.0033 0.0153 As2 5.29 Ton-m 2 5.76 cm /m 0.0023 < 0.0033 OK 2 25.00 cm 1# 5 @ 24 13 # 5 OK As3 H As1 h L-B 2 OK OK L-B 2 B L Mux = As = ρ= As = REVISION POR CORTANTE d= 0.25 m Vux = 19.70 Ton OK φVcx = 47.78 Ton (L-B)/2 = Vuy = φVcy = OK As2 = As2 = As2 = REVISION POR PENETRACION Vu = 53.66 Ton φVc = 85.95 Ton OK As3 = As3 = As3 = 19.70 Ton 47.78 Ton L= B= W= 5.29 Ton-m 2 5.76 cm /m 0.0023 < 2 25.00 cm As3 0.0033 OK As2 B E= 1.00 0 m 2 25.00 cm 1# 5 13 # 5 0.00 1# NA cm 2 5 Y As1 @ 24 NA As3 W ESCALERAS Job No Sheet No Rev 1 Part Software licensed to (ñ Job Title Ref By Client File Date03-Aug-10 Chd Date/Time Escaleras.std 03-Aug-2010 11:33 19 18 21 16 15 20 17 14 9 11 8 13 10 5 12 3 Y X Z 1 6 4 Load 1 2 7 Print Time/Date: 10/08/2010 16:53 STAAD.Pro for Windows Release 2003 Print Run 1 of 1 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.std 08/03/10 11:33:55 STAAD SPACE START JOB INFORMATION ENGINEER DATE 03-Aug-10 END JOB INFORMATION *PAGE LENGTH 1212343456792 INPUT WIDTH 79 UNIT CM KG JOINT COORDINATES 1 0 0 0; 2 120 0 0; 3 0 0 450; 4 120 0 450; 5 0 0 900; 6 120 0 900; 7 0 100 0; 8 120 100 0; 9 0 377.5 450; 10 120 377.5 450; 11 0 581 780; 12 120 581 780; 13 0 581 900; 14 120 581 900; MEMBER INCIDENCES 1 1 3; 2 3 5; 3 2 4; 4 4 6; 5 1 2; 6 3 4; 7 5 6; 8 1 7; 9 2 8; 10 3 9; 11 4 10; 12 5 13; 13 6 14; 14 7 9; 15 9 11; 16 11 13; 17 8 10; 18 10 12; 19 12 14; 20 9 10; 21 13 14; ELEMENT INCIDENCES SHELL 22 1 2 8 7; 23 7 9 10 8; 24 9 11 12 10; 25 11 13 14 12; IGNORE STIFFNESS ELEMENT 22 TO 25 DEFINE MATERIAL START ISOTROPIC TRABES E 59400 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5e-006 DAMP 0.05 ISOTROPIC CONTRATRABES E 59400 POISSON 0.17 ALPHA 5.5e-006 DAMP 0.05 ISOTROPIC COLUMNAS E 118800 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5e-006 DAMP 0.05 ISOTROPIC RAMPAS E 42425 POISSON 0.17 ALPHA 5.5e-006 DAMP 0.05 END DEFINE MATERIAL CONSTANTS MATERIAL COLUMNAS MEMB 8 TO 13 MATERIAL CONTRATRABES MEMB 1 TO 7 MATERIAL RAMPAS MEMB 22 TO 25 MATERIAL TRABES MEMB 14 TO 21 MEMBER PROPERTY AMERICAN 10 TO 13 PRIS YD 30 ZD 30 14 TO 19 PRIS YD 35 ZD 20 20 21 PRIS YD 30 ZD 20 5 TO 7 PRIS YD 40 ZD 20 1 TO 4 PRIS YD 45 ZD 20 8 9 PRIS YD 20 ZD 20 ELEMENT PROPERTY 22 THICKNESS 20 23 TO 25 THICKNESS 10 SUPPORTS 1 TO 6 PINNED UNIT METER KG LOAD 1 CARGA MUERTA SELFWEIGHT Y -1 MEMBER LOAD 14 TO 19 UNI GY -300 20 UNI GY -250 21 UNI GY -125 LOAD 2 CARGA VIVA MEMBER LOAD 14 TO 19 UNI GY -210 15 20 UNI GY -175 21 UNI GY -90 UNIT METER MTON LOAD 3 SISMO EN X (SIN FACTORIZAR Q) JOIN LOAD 7 FX 0.171 MY 0.000 8 FX 0.171 MY 0.000 * --------------------* TOTAL = 0.342 0.000 AT LEVEL 100.000 CM * 9 FX 0.607 MY 0.000 10 FX 0.534 MY 0.000 * --------------------* TOTAL = 1.141 0.000 AT LEVEL 377.500 CM * Page: 1 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.std 08/03/10 11:33:55 13 14 FX FX 0.491 0.465 ----------TOTAL = 0.957 MY MY 0.000 0.000 ----------0.000 AT LEVEL * * 581.000 * LOAD 4 SISMO EN Z (SIN FACTORIZAR Q) JOIN LOAD 7 FZ 0.171 MY 0.000 8 FZ 0.171 MY 0.000 * --------------------* TOTAL = 0.342 0.000 AT LEVEL 100.000 * 9 FZ 0.607 MY 0.000 10 FZ 0.534 MY 0.000 * --------------------* TOTAL = 1.141 0.000 AT LEVEL 377.500 * 13 FZ 0.491 MY 0.000 14 FZ 0.465 MY 0.000 * --------------------* TOTAL = 0.957 0.000 AT LEVEL 581.000 * LOAD 5 1.2 CARGA MUERTA + 1.6 CARGA VIVA REPEAT LOAD 1 1.2 2 1.6 LOAD 6 1.2 MUERTA + 1.0 VIVA + 1.4/Q SISMO X + 0.42/Q SISMO Z REPEAT LOAD 1 1.2 2 1 3 0.4667 4 0.14 LOAD 7 1.2 MUERTA + 1.0 VIVA + 1.4/Q SISMO X - 0.42/Q SISMO Z REPEAT LOAD 1 1.2 2 1 3 0.4667 4 -0.14 LOAD 8 1.2 MUERTA + 1.0 VIVA - 1.4/Q SISMO X + 0.42/Q SISMO Z REPEAT LOAD 1 1.2 2 1 3 -0.4667 4 0.14 LOAD 9 1.2 MUERTA + 1.0 VIVA - 1.4/Q SISMO X - 0.42/Q SISMO Z REPEAT LOAD 1 1.2 2 1 3 -0.4667 4 -0.14 LOAD 10 1.2 MUERTA + 1.0 VIVA + 1.4/Q SISMO Z + 0.42/Q SISMO X REPEAT LOAD 1 1.2 2 1 4 0.4667 3 0.14 LOAD 11 1.2 MUERTA + 1.0 VIVA + 1.4/Q SISMO Z - 0.42/Q SISMO X REPEAT LOAD 1 1.2 2 1 4 0.4667 3 -0.14 LOAD 12 1.2 MUERTA + 1.0 VIVA - 1.4/Q SISMO Z + 0.42/Q SISMO X REPEAT LOAD 1 1.2 2 1 4 -0.4667 3 0.14 LOAD 13 1.2 MUERTA + 1.0 VIVA - 1.4/Q SISMO Z - 0.42/Q SISMO X REPEAT LOAD 1 1.2 2 1 4 -0.4667 3 -0.14 *CARGAS SERVICIO LOAD 14 MUERTA + VIVA REPEAT LOAD 1 1 2 1 LOAD 15 0.75 (MUERTA + VIVA + SISMO X/Q + 0.3 SISMO Z/Q) REPEAT LOAD 1 0.75 2 0.75 3 0.25 4 0.0833 LOAD 16 0.75 (MUERTA + VIVA + SISMO X/Q - 0.3 SISMO Z/Q) REPEAT LOAD 1 0.75 2 0.75 3 0.25 4 -0.0833 LOAD 17 0.75 (MUERTA + VIVA - SISMO X/Q + 0.3 SISMO Z/Q) REPEAT LOAD 1 0.75 2 0.75 3 -0.25 4 0.0833 LOAD 18 0.75 (MUERTA + VIVA - SISMO X/Q - 0.3 SISMO Z/Q) REPEAT LOAD 1 0.75 2 0.75 3 -0.25 4 -0.0833 LOAD 19 0.75 (MUERTA + VIVA + SISMO Z/Q + 0.3 SISMO X/Q) REPEAT LOAD 1 0.75 2 0.75 4 0.25 3 0.0833 LOAD 20 0.75 (MUERTA + VIVA + SISMO Z/Q - 0.3 SISMO X/Q) REPEAT LOAD 1 0.75 2 0.75 4 0.25 3 -0.0833 LOAD 21 0.75 (MUERTA + VIVA - SISMO Z/Q + 0.3 SISMO X/Q) REPEAT LOAD 1 0.75 2 0.75 4 -0.25 3 0.0833 LOAD 22 0.75 (MUERTA + VIVA - SISMO Z/Q - 0.3 SISMO X/Q) REPEAT LOAD 1 0.75 2 0.75 4 -0.25 3 -0.0833 PDELTA ANALYSIS LOAD LIST 3 4 14 PRINT JOIN DISP LOAD LIST 14 TO 22 PRINT SUPP REAC LOAD LIST 5 TO 13 PRINT ANALYSIS RESULTS Page: 2 CM CM CM CM C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.std 08/03/10 11:33:55 UNIT KG CM START CONCRETE DESIGN CODE ACI FC 200 ALL FYMAIN 4200 ALL CLB 4 MEMB 10 TO 13 CLT 4 MEMB 10 TO 13 DESIGN COLUMN 10 TO 13 CONCRETE TAKE END CONCRETE DESIGN *finish UNIT KG METER PRINT ANALYSIS RESULTS PAGE LENGTH 99999999999999999999999999999999999999999999 PRINT MEMBER INFORMATION ALL START SCRIPT LANGUAGE OPEN FILE ESCALERA.INF WRITE HEADER FORMAT = 'NUDOS' FOR JOINT ALL WRITE COORD JOINT FORMAT = I8, 3F10.3 CLOSE OPEN FILE ESCALERA.MEF WRITE HEADER FORMAT = 'MEMBER' FOR MEMBER ALL WRITE PROP MEMB B D FORMAT = I8,2X, F8.2, 2X, F8.2 CLOSE WRITE HEADER FORMAT = 'LOADS' FOR MEMBER ALL FOR LOAD 5 TO 13 WRITE FORCE MEMB LOAD FX1 FY1 FZ1 MX1 MY1 MZ1 FX2 FY2 FZ2 MX2 MY2 MZ2 FORMAT = I8,2X, I8, 12F13.1 CLOSE END SCRIPT LANGUAGE FINISH *ANÁLISIS SÍSMICO UNIT MTON DEFINE UBC LOAD ZONE 0.2 I 1 RWX 3.233606557 RWZ 3.233606557 S 1.5 JOINT WEIGHT 7 WEIGHT 3.03 8 WEIGHT 3.03 9 WEIGHT 2.85 10 WEIGHT 2.51 13 WEIGHT 1.50 14 WEIGHT 1.42 LOAD 1 UBC IN X-DIRECTION UBC LOAD X 1 LOAD 2 UBC IN Z-DIRECTION UBC LOAD Z 1 LOAD 3 PESO PROPIO SELFWEIGHT Y -1 PERFORM ANALYSIS PRINT LOAD DATA LOAD LIST 1 TO 3 PRINT ANALISYS RESULTS FINISH Page: 3 Tuesday, August 10, 2010, 04:54 PM PAGE NO. 1 **************************************************** * * * STAAD.Pro * * Version 2003 Bld 1001.US * * Proprietary Program of * * Research Engineers, Intl. * * Date= AUG 3, 2010 * * Time= 11:33:59 * * * * USER ID: * **************************************************** 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. STAAD SPACE START JOB INFORMATION ENGINEER DATE 03-AUG-10 END JOB INFORMATION *PAGE LENGTH 1212343456792 INPUT WIDTH 79 UNIT CM KG JOINT COORDINATES 1 0 0 0; 2 120 0 0; 3 0 0 450; 4 120 0 450; 5 0 0 900; 6 120 0 900; 7 0 100 0 8 120 100 0; 9 0 377.5 450; 10 120 377.5 450; 11 0 581 780; 12 120 581 780 13 0 581 900; 14 120 581 900 MEMBER INCIDENCES 1 1 3; 2 3 5; 3 2 4; 4 4 6; 5 1 2; 6 3 4; 7 5 6; 8 1 7; 9 2 8; 10 3 9; 11 4 10 12 5 13; 13 6 14; 14 7 9; 15 9 11; 16 11 13; 17 8 10; 18 10 12; 19 12 14 20 9 10; 21 13 14 ELEMENT INCIDENCES SHELL 22 1 2 8 7; 23 7 9 10 8; 24 9 11 12 10; 25 11 13 14 12 IGNORE STIFFNESS ELEMENT 22 TO 25 DEFINE MATERIAL START ISOTROPIC TRABES E 59400 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5E-006 DAMP 0.05 ISOTROPIC CONTRATRABES E 59400 POISSON 0.17 ALPHA 5.5E-006 DAMP 0.05 ISOTROPIC COLUMNAS E 118800 POISSON 0.17 DENSITY 0.00240262 ALPHA 5.5E-006 DAMP 0.05 ISOTROPIC RAMPAS E 42425 POISSON 0.17 ALPHA 5.5E-006 DAMP 0.05 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 1 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89. 90. 91. 92. 93. 94. 95. 96. 97. -- PAGE NO. END DEFINE MATERIAL CONSTANTS MATERIAL COLUMNAS MEMB 8 TO 13 MATERIAL CONTRATRABES MEMB 1 TO 7 MATERIAL RAMPAS MEMB 22 TO 25 MATERIAL TRABES MEMB 14 TO 21 MEMBER PROPERTY AMERICAN 10 TO 13 PRIS YD 30 ZD 30 14 TO 19 PRIS YD 35 ZD 20 20 21 PRIS YD 30 ZD 20 5 TO 7 PRIS YD 40 ZD 20 1 TO 4 PRIS YD 45 ZD 20 8 9 PRIS YD 20 ZD 20 ELEMENT PROPERTY 22 THICKNESS 20 23 TO 25 THICKNESS 10 SUPPORTS 1 TO 6 PINNED UNIT METER KG LOAD 1 CARGA MUERTA SELFWEIGHT Y -1 MEMBER LOAD 14 TO 19 UNI GY -300 20 UNI GY -250 21 UNI GY -125 LOAD 2 CARGA VIVA MEMBER LOAD 14 TO 19 UNI GY -210 15 20 UNI GY -175 21 UNI GY -90 UNIT METER MTON LOAD 3 SISMO EN X (SIN FACTORIZAR Q) JOIN LOAD 7 FX 0.171 MY 0.000 8 FX 0.171 MY 0.000 * --------------------* TOTAL = 0.342 0.000 AT LEVEL * 9 FX 0.607 MY 0.000 10 FX 0.534 MY 0.000 * --------------------* TOTAL = 1.141 0.000 AT LEVEL * 13 FX 0.491 MY 0.000 14 FX 0.465 MY 0.000 * --------------------* TOTAL = 0.957 0.000 AT LEVEL * LOAD 4 SISMO EN Z (SIN FACTORIZAR Q) JOIN LOAD 7 FZ 0.171 MY 0.000 8 FZ 0.171 MY 0.000 * --------------------* TOTAL = 0.342 0.000 AT LEVEL * 9 FZ 0.607 MY 0.000 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl 2 100.000 CM 377.500 CM 581.000 CM 100.000 CM Page 2 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE 98. 99. 100. 101. 102. 103. 104. 105. 106. 107. 108. 109. 110. 111. 112. 113. 114. 115. 116. 117. 118. 119. 120. 121. 122. 123. 124. 125. 126. 127. 128. 129. 130. 131. 132. 133. 134. 135. 136. 137. 138. 139. 140. 141. 142. 143. 144. 145. 146. 147. 148. 149. 150. 151. 152. 153. -- PAGE NO. 3 10 FZ 0.534 MY 0.000 * --------------------* TOTAL = 1.141 0.000 AT LEVEL 377.500 CM * 13 FZ 0.491 MY 0.000 14 FZ 0.465 MY 0.000 * --------------------* TOTAL = 0.957 0.000 AT LEVEL 581.000 CM * LOAD 5 1.2 CARGA MUERTA + 1.6 CARGA VIVA REPEAT LOAD 1 1.2 2 1.6 LOAD 6 1.2 MUERTA + 1.0 VIVA + 1.4/Q SISMO X + 0.42/Q SISMO Z REPEAT LOAD 1 1.2 2 1 3 0.4667 4 0.14 LOAD 7 1.2 MUERTA + 1.0 VIVA + 1.4/Q SISMO X - 0.42/Q SISMO Z REPEAT LOAD 1 1.2 2 1 3 0.4667 4 -0.14 LOAD 8 1.2 MUERTA + 1.0 VIVA - 1.4/Q SISMO X + 0.42/Q SISMO Z REPEAT LOAD 1 1.2 2 1 3 -0.4667 4 0.14 LOAD 9 1.2 MUERTA + 1.0 VIVA - 1.4/Q SISMO X - 0.42/Q SISMO Z REPEAT LOAD 1 1.2 2 1 3 -0.4667 4 -0.14 LOAD 10 1.2 MUERTA + 1.0 VIVA + 1.4/Q SISMO Z + 0.42/Q SISMO X REPEAT LOAD 1 1.2 2 1 4 0.4667 3 0.14 LOAD 11 1.2 MUERTA + 1.0 VIVA + 1.4/Q SISMO Z - 0.42/Q SISMO X REPEAT LOAD 1 1.2 2 1 4 0.4667 3 -0.14 LOAD 12 1.2 MUERTA + 1.0 VIVA - 1.4/Q SISMO Z + 0.42/Q SISMO X REPEAT LOAD 1 1.2 2 1 4 -0.4667 3 0.14 LOAD 13 1.2 MUERTA + 1.0 VIVA - 1.4/Q SISMO Z - 0.42/Q SISMO X REPEAT LOAD 1 1.2 2 1 4 -0.4667 3 -0.14 *CARGAS SERVICIO LOAD 14 MUERTA + VIVA REPEAT LOAD 1 1 2 1 LOAD 15 0.75 (MUERTA + VIVA + SISMO X/Q + 0.3 SISMO Z/Q) REPEAT LOAD 1 0.75 2 0.75 3 0.25 4 0.0833 LOAD 16 0.75 (MUERTA + VIVA + SISMO X/Q - 0.3 SISMO Z/Q) REPEAT LOAD 1 0.75 2 0.75 3 0.25 4 -0.0833 LOAD 17 0.75 (MUERTA + VIVA - SISMO X/Q + 0.3 SISMO Z/Q) REPEAT LOAD 1 0.75 2 0.75 3 -0.25 4 0.0833 LOAD 18 0.75 (MUERTA + VIVA - SISMO X/Q - 0.3 SISMO Z/Q) REPEAT LOAD 1 0.75 2 0.75 3 -0.25 4 -0.0833 LOAD 19 0.75 (MUERTA + VIVA + SISMO Z/Q + 0.3 SISMO X/Q) REPEAT LOAD 1 0.75 2 0.75 4 0.25 3 0.0833 LOAD 20 0.75 (MUERTA + VIVA + SISMO Z/Q - 0.3 SISMO X/Q) C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 3 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE 154. 155. 156. 157. 158. 159. 160. 161. 162. -- PAGE NO. 4 REPEAT LOAD 1 0.75 2 0.75 4 0.25 3 -0.0833 LOAD 21 0.75 (MUERTA + VIVA - SISMO Z/Q + 0.3 SISMO X/Q) REPEAT LOAD 1 0.75 2 0.75 4 -0.25 3 0.0833 LOAD 22 0.75 (MUERTA + VIVA - SISMO Z/Q - 0.3 SISMO X/Q) REPEAT LOAD 1 0.75 2 0.75 4 -0.25 3 -0.0833 PDELTA ANALYSIS P R O B L E M S T A T I S T I C S ----------------------------------NUMBER OF JOINTS/MEMBER+ELEMENTS/SUPPORTS = 14/ 25/ 6 ORIGINAL/FINAL BAND-WIDTH= 8/ 6/ 36 DOF TOTAL PRIMARY LOAD CASES = 22, TOTAL DEGREES OF FREEDOM = 75 SIZE OF STIFFNESS MATRIX = 3 DOUBLE KILO-WORDS REQRD/AVAIL. DISK SPACE = 12.1/ 2890.2 MB, EXMEM = 1837.1 MB ++ Adjusting Displacements 11:33:59 163. LOAD LIST 3 4 14 164. PRINT JOIN DISP C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 4 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 LOAD 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 3 4 14 X-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0579 -0.0004 0.0003 0.0579 -0.0004 0.0000 0.6360 -0.0013 -0.0051 0.6358 -0.0013 -0.0051 1.3092 0.0009 -0.0070 1.3092 0.0009 -0.0106 1.4113 0.0039 0.0034 1.4113 0.0039 0.0034 RADIANS) Y-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0003 0.0014 -0.0038 -0.0003 0.0013 -0.0038 0.0061 -0.0015 -0.0179 -0.0061 -0.0014 -0.0162 0.0052 -0.0237 -0.2794 -0.0051 -0.0238 -0.2318 0.0106 -0.0013 -0.0134 -0.0106 -0.0013 -0.0125 5 STRUCTURE TYPE = SPACE Z-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0221 0.1525 0.1097 -0.0222 0.1473 0.1154 0.0214 0.1698 0.1140 -0.0215 0.1638 0.1189 0.0231 0.1887 0.2677 -0.0231 0.1828 0.2463 0.0233 0.1899 0.2669 -0.0234 0.1840 0.2458 X-ROTAN 0.0001 0.0007 0.0002 -0.0001 0.0007 0.0002 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0006 0.0000 0.0002 0.0005 0.0002 0.0012 0.0024 -0.0002 0.0012 0.0025 0.0000 0.0003 0.0003 0.0000 0.0003 0.0001 0.0000 -0.0002 -0.0021 0.0000 -0.0002 -0.0017 0.0000 0.0000 -0.0015 0.0000 0.0000 -0.0012 Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0003 0.0000 0.0000 0.0003 0.0000 0.0000 0.0005 0.0000 0.0000 0.0005 0.0000 0.0000 0.0011 0.0000 0.0000 0.0011 0.0000 0.0001 0.0005 0.0000 0.0001 0.0005 0.0000 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Z-ROTAN -0.0001 0.0000 0.0000 -0.0001 0.0000 0.0000 -0.0005 0.0000 0.0000 -0.0005 0.0000 0.0000 -0.0006 0.0000 0.0000 -0.0006 0.0000 0.0000 -0.0008 0.0000 0.0000 -0.0008 0.0000 0.0000 -0.0011 0.0000 0.0000 -0.0011 0.0000 0.0001 -0.0015 0.0000 0.0000 -0.0015 0.0000 0.0001 -0.0012 0.0000 0.0000 -0.0012 0.0000 0.0000 Page 5 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. 6 ************** END OF LATEST ANALYSIS RESULT ************** 165. LOAD LIST 14 TO 22 166. PRINT SUPP REAC C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 6 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT MTON METE ----------------JOINT 1 2 3 4 5 6 7 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 14 15 16 17 18 19 20 21 22 14 15 16 17 18 19 20 21 22 14 15 16 17 18 19 20 21 22 14 15 16 17 18 19 20 21 22 14 15 16 17 18 19 20 21 22 14 15 16 0.28 -3.00 -2.99 3.41 3.41 -0.86 1.27 -0.86 1.27 0.00 -0.05 -0.05 0.04 0.04 -0.02 0.01 -0.02 0.01 0.02 -0.14 -0.14 0.16 0.16 -0.04 0.06 -0.04 0.06 -0.01 -0.16 -0.16 0.14 0.14 -0.06 0.04 -0.06 0.04 0.00 -0.11 -0.11 0.11 0.11 -0.03 0.04 -0.03 0.04 -0.01 -0.12 -0.12 3.79 0.21 0.46 5.23 5.48 1.64 3.31 2.38 4.05 1.78 1.40 1.53 1.13 1.27 1.17 1.08 1.58 1.49 5.41 3.15 3.06 5.05 4.96 3.88 4.51 3.60 4.23 4.89 4.67 4.58 2.76 2.68 4.12 3.48 3.86 3.23 3.24 1.39 1.34 3.52 3.47 2.15 2.86 2.00 2.71 3.08 3.40 3.35 0.88 0.38 0.77 0.55 0.94 0.05 0.10 1.21 1.27 0.36 0.24 0.40 0.14 0.30 0.05 0.02 0.53 0.49 -0.09 -0.11 -0.08 -0.06 -0.03 -0.13 -0.11 -0.03 -0.01 -0.17 -0.12 -0.09 -0.17 -0.14 -0.16 -0.18 -0.08 -0.09 -0.27 -0.23 -0.21 -0.19 -0.18 -0.23 -0.22 -0.19 -0.18 -0.20 -0.14 -0.13 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 7 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT MTON METE ----------------JOINT 8 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 17 18 19 20 21 22 0.10 0.10 -0.04 0.03 -0.04 0.03 1.28 1.23 2.74 2.04 2.59 1.88 -0.17 -0.16 -0.16 -0.17 -0.13 -0.14 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 ************** END OF LATEST ANALYSIS RESULT ************** 167. LOAD LIST 5 TO 13 168. PRINT ANALYSIS RESULTS C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 8 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 1 2 3 4 5 6 LOAD 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 X-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 RADIANS) Y-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 9 STRUCTURE TYPE = SPACE Z-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 X-ROTAN 0.0003 0.0004 0.0002 0.0003 0.0001 0.0006 0.0006 -0.0001 -0.0001 0.0003 0.0003 0.0001 0.0004 0.0002 0.0006 0.0006 -0.0001 -0.0001 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0008 0.0007 0.0006 0.0007 0.0006 0.0007 0.0007 0.0006 0.0006 0.0007 0.0006 0.0005 Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Z-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0002 -0.0002 0.0003 0.0003 -0.0001 0.0001 -0.0001 0.0001 0.0000 -0.0003 -0.0003 0.0002 0.0002 -0.0001 0.0001 -0.0001 0.0001 0.0000 -0.0003 -0.0003 0.0003 0.0003 -0.0001 0.0001 -0.0001 0.0001 0.0000 -0.0003 -0.0003 Page 9 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 7 8 9 10 11 LOAD 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 X-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0004 0.0275 0.0276 -0.0270 -0.0269 0.0083 -0.0081 0.0087 -0.0077 0.0000 0.0271 0.0272 -0.0274 -0.0273 0.0079 -0.0085 0.0083 -0.0080 -0.0082 0.2961 0.2964 -0.3066 -0.3062 0.0848 -0.0961 0.0859 -0.0949 -0.0082 0.2960 0.2963 -0.3066 -0.3062 0.0847 -0.0961 0.0858 -0.0949 -0.0117 0.6142 0.6140 -0.6274 -0.6277 0.1799 RADIANS) Y-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 -0.0050 -0.0040 -0.0044 -0.0042 -0.0046 -0.0036 -0.0037 -0.0049 -0.0050 -0.0050 -0.0042 -0.0046 -0.0040 -0.0044 -0.0037 -0.0036 -0.0050 -0.0049 -0.0241 -0.0176 -0.0171 -0.0234 -0.0230 -0.0201 -0.0218 -0.0187 -0.0204 -0.0212 -0.0216 -0.0212 -0.0158 -0.0154 -0.0200 -0.0182 -0.0187 -0.0170 -0.3840 -0.3118 -0.3052 -0.3167 -0.3101 -0.3212 10 STRUCTURE TYPE = SPACE Z-TRANS 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.1446 0.1572 0.1143 0.1363 0.0933 0.1999 0.1937 0.0568 0.0506 0.1539 0.1413 0.0998 0.1622 0.1208 0.1970 0.2033 0.0588 0.0651 0.1506 0.1641 0.1163 0.1438 0.0960 0.2127 0.2066 0.0535 0.0473 0.1585 0.1479 0.1018 0.1682 0.1221 0.2087 0.2148 0.0551 0.0612 0.3622 0.3384 0.2854 0.3167 0.2636 0.3927 X-ROTAN 0.0006 0.0006 0.0007 0.0007 0.0005 0.0005 0.0032 0.0030 0.0027 0.0028 0.0025 0.0033 0.0033 0.0022 0.0022 0.0033 0.0029 0.0026 0.0031 0.0028 0.0034 0.0034 0.0023 0.0023 0.0005 0.0004 0.0003 0.0004 0.0003 0.0005 0.0005 0.0002 0.0002 0.0002 0.0001 0.0001 0.0002 0.0001 0.0002 0.0003 0.0000 0.0000 -0.0029 -0.0024 -0.0023 -0.0023 -0.0023 -0.0024 Y-ROTAN 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0002 0.0002 -0.0002 -0.0002 0.0000 -0.0001 0.0000 -0.0001 0.0000 0.0002 0.0002 -0.0002 -0.0002 0.0001 0.0000 0.0001 0.0000 -0.0001 0.0002 0.0002 -0.0003 -0.0003 0.0000 -0.0001 0.0000 -0.0001 0.0000 0.0002 0.0002 -0.0002 -0.0002 0.0001 -0.0001 0.0000 -0.0001 0.0001 0.0006 0.0006 -0.0005 -0.0005 0.0002 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Z-ROTAN 0.0003 0.0003 -0.0001 0.0001 -0.0001 0.0001 0.0000 -0.0004 -0.0004 0.0004 0.0004 -0.0001 0.0001 -0.0001 0.0001 0.0000 -0.0004 -0.0004 0.0004 0.0004 -0.0001 0.0001 -0.0001 0.0001 0.0000 -0.0005 -0.0005 0.0005 0.0005 -0.0002 0.0001 -0.0002 0.0001 0.0001 -0.0004 -0.0004 0.0006 0.0006 -0.0001 0.0002 -0.0001 0.0002 0.0000 -0.0007 -0.0007 0.0007 0.0007 -0.0002 Page 10 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. JOINT DISPLACEMENT (CM -----------------JOINT 12 13 14 LOAD 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 X-TRANS -0.1925 0.1791 -0.1934 -0.0164 0.6100 0.6098 -0.6314 -0.6318 0.1758 -0.1966 0.1749 -0.1975 0.0055 0.6730 0.6719 -0.6650 -0.6662 0.2059 -0.1954 0.2023 -0.1992 0.0054 0.6729 0.6719 -0.6650 -0.6662 0.2059 -0.1954 0.2022 -0.1992 RADIANS) Y-TRANS -0.3227 -0.2992 -0.3007 -0.3079 -0.2692 -0.2626 -0.2642 -0.2576 -0.2752 -0.2737 -0.2531 -0.2516 -0.0176 -0.0105 -0.0102 -0.0206 -0.0202 -0.0145 -0.0175 -0.0133 -0.0163 -0.0162 -0.0197 -0.0193 -0.0096 -0.0093 -0.0166 -0.0136 -0.0154 -0.0123 11 STRUCTURE TYPE = SPACE Z-TRANS 0.3862 0.2158 0.2093 0.3279 0.2944 0.2430 0.3162 0.2648 0.3620 0.3685 0.1906 0.1972 0.3611 0.3378 0.2844 0.3158 0.2624 0.3924 0.3858 0.2144 0.2078 0.3273 0.2938 0.2421 0.3158 0.2641 0.3619 0.3685 0.1894 0.1960 X-ROTAN -0.0024 -0.0022 -0.0022 -0.0022 -0.0019 -0.0019 -0.0020 -0.0019 -0.0020 -0.0020 -0.0018 -0.0018 -0.0020 -0.0016 -0.0016 -0.0016 -0.0016 -0.0016 -0.0016 -0.0016 -0.0016 -0.0017 -0.0014 -0.0014 -0.0014 -0.0014 -0.0014 -0.0014 -0.0014 -0.0014 Y-ROTAN -0.0001 0.0002 -0.0001 0.0001 0.0006 0.0006 -0.0004 -0.0004 0.0003 -0.0001 0.0002 -0.0001 0.0002 0.0004 0.0004 -0.0001 -0.0001 0.0002 0.0001 0.0002 0.0000 0.0002 0.0004 0.0004 -0.0001 -0.0001 0.0002 0.0001 0.0002 0.0001 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Z-ROTAN 0.0002 -0.0002 0.0002 0.0001 -0.0006 -0.0006 0.0008 0.0008 -0.0001 0.0003 -0.0001 0.0003 -0.0001 -0.0006 -0.0006 0.0005 0.0005 -0.0002 0.0001 -0.0002 0.0001 0.0001 -0.0005 -0.0005 0.0006 0.0006 -0.0001 0.0002 -0.0001 0.0002 Page 11 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT MTON METE ----------------JOINT 1 2 3 4 5 6 12 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 5 6 7 0.36 -5.67 -5.67 6.32 6.31 -1.48 2.12 -1.48 2.11 0.00 -0.09 -0.09 0.08 0.08 -0.03 0.02 -0.03 0.02 0.02 -0.26 -0.26 0.30 0.30 -0.06 0.10 -0.07 0.10 -0.01 -0.29 -0.29 0.27 0.27 -0.10 0.07 -0.10 0.07 0.00 -0.20 -0.20 0.21 0.21 -0.06 0.06 -0.06 0.07 -0.01 -0.21 -0.21 4.99 -0.57 -0.15 8.82 9.23 2.23 5.04 3.62 6.43 2.33 2.16 2.39 1.66 1.89 1.72 1.57 2.49 2.34 7.19 4.42 4.27 8.00 7.84 5.86 6.93 5.34 6.41 6.37 7.48 7.34 3.91 3.76 6.40 5.33 5.92 4.85 4.18 1.79 1.71 5.77 5.69 3.28 4.48 3.01 4.20 3.93 5.62 5.53 1.15 0.52 1.17 0.83 1.48 -0.14 -0.04 2.04 2.14 0.47 0.37 0.64 0.18 0.45 0.00 -0.06 0.89 0.83 -0.10 -0.19 -0.13 -0.10 -0.05 -0.22 -0.19 -0.04 -0.01 -0.23 -0.17 -0.12 -0.26 -0.21 -0.26 -0.29 -0.10 -0.12 -0.37 -0.34 -0.32 -0.28 -0.26 -0.34 -0.32 -0.28 -0.26 -0.27 -0.21 -0.19 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 12 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. SUPPORT REACTIONS -UNIT MTON METE ----------------JOINT 13 STRUCTURE TYPE = SPACE LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z 8 9 10 11 12 13 0.20 0.20 -0.07 0.05 -0.07 0.05 1.64 1.55 4.33 3.13 4.04 2.84 -0.27 -0.26 -0.25 -0.27 -0.20 -0.22 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 13 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. 14 MEMBER END FORCES STRUCTURE TYPE = SPACE ----------------ALL UNITS ARE -- MTON METE MEMBER 1 LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z 5 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.06 0.06 -0.10 0.10 -0.04 0.04 -0.08 0.08 -0.02 0.02 -0.15 0.15 -0.15 0.15 0.03 -0.03 0.04 -0.04 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 -0.01 0.01 -0.01 -0.01 0.01 -0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.01 -0.01 -0.01 -0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.21 -0.08 -0.30 -0.14 -0.14 -0.06 -0.23 -0.10 -0.07 -0.02 -0.46 -0.23 -0.44 -0.22 0.07 0.06 0.09 0.07 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 3 5 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.20 0.20 -0.18 0.18 -0.16 0.16 -0.17 0.17 -0.15 0.15 -0.19 0.19 -0.19 0.19 -0.14 0.14 -0.14 0.14 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.01 0.01 -0.01 0.00 -0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.27 -0.61 -0.26 -0.54 -0.23 -0.49 -0.24 -0.52 -0.21 -0.47 -0.29 -0.58 -0.28 -0.58 -0.19 -0.43 -0.18 -0.42 2 4 2 4 2 4 0.00 0.00 0.00 0.00 0.00 0.00 -0.09 0.09 -0.09 0.09 -0.03 0.03 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 -0.01 0.01 -0.01 0.00 0.00 0.00 0.01 0.00 0.01 -0.25 -0.14 -0.25 -0.14 -0.10 -0.06 6 7 8 9 10 11 12 13 2 5 6 7 8 9 10 11 12 13 3 5 6 7 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 14 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. 15 MEMBER END FORCES STRUCTURE TYPE = SPACE ----------------ALL UNITS ARE -- MTON METE MEMBER LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z 8 2 4 2 4 2 4 2 4 2 4 2 4 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.11 0.11 -0.06 0.06 -0.16 0.16 -0.16 0.16 0.02 -0.02 0.01 -0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.01 0.01 -0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.01 0.00 -0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.32 -0.18 -0.16 -0.10 -0.46 -0.25 -0.48 -0.26 0.06 0.02 0.04 0.01 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.19 0.19 -0.16 0.16 -0.15 0.15 -0.17 0.17 -0.15 0.15 -0.19 0.19 -0.19 0.19 -0.13 0.13 -0.13 0.13 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.01 0.01 0.00 0.00 -0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.29 -0.55 -0.26 -0.48 -0.23 -0.44 -0.27 -0.50 -0.24 -0.46 -0.29 -0.54 -0.30 -0.55 -0.20 -0.39 -0.20 -0.40 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.18 0.18 -0.18 0.18 0.18 -0.18 0.18 -0.18 -0.05 0.05 0.06 -0.06 -0.06 0.06 0.00 0.00 -0.02 0.02 -0.02 0.02 0.02 -0.02 0.02 -0.02 -0.01 0.01 0.01 -0.01 -0.01 0.01 0.00 0.00 0.01 -0.01 0.01 -0.01 -0.01 0.01 -0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.01 0.01 -0.01 -0.01 -0.01 -0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.11 -0.11 -0.11 -0.11 0.11 0.11 0.11 0.11 -0.03 -0.03 0.03 0.03 -0.03 -0.03 9 10 11 12 13 4 5 6 7 8 9 10 11 12 13 5 5 6 7 8 9 10 11 12 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 15 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. 16 MEMBER END FORCES STRUCTURE TYPE = SPACE ----------------ALL UNITS ARE -- MTON METE MEMBER 6 LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z 13 1 2 0.00 0.00 0.05 -0.05 0.01 -0.01 -0.01 0.01 0.00 0.00 0.03 0.03 5 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 -0.02 -0.96 0.96 -0.96 0.96 0.98 -0.98 0.98 -0.98 -0.28 0.28 0.30 -0.30 -0.28 0.28 0.30 -0.30 0.01 -0.01 -0.03 0.03 -0.03 0.03 0.04 -0.04 0.04 -0.04 -0.01 0.01 0.01 -0.01 0.00 0.00 0.02 -0.02 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 -0.01 0.02 0.02 0.01 0.02 -0.02 -0.02 -0.02 -0.02 0.00 0.00 -0.01 -0.01 0.00 0.00 -0.01 -0.01 0.03 0.00 -0.56 -0.59 -0.56 -0.59 0.60 0.58 0.60 0.58 -0.15 -0.18 0.20 0.17 -0.15 -0.18 0.19 0.17 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.01 0.01 -1.08 1.08 -1.08 1.08 1.06 -1.06 1.06 -1.06 -0.33 0.33 0.31 -0.31 -0.33 0.33 0.32 -0.32 -0.03 0.03 -0.04 0.04 -0.04 0.04 0.01 -0.01 0.01 -0.01 -0.03 0.03 -0.01 0.01 -0.02 0.02 -0.01 0.01 0.02 -0.02 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.01 -0.01 0.02 0.02 0.03 0.03 0.03 0.03 -0.01 0.00 -0.01 -0.01 0.02 0.02 0.01 0.01 0.01 0.01 0.00 0.00 0.00 -0.02 -0.64 -0.66 -0.64 -0.65 0.65 0.63 0.65 0.63 -0.19 -0.21 0.20 0.18 -0.19 -0.20 0.20 0.18 1 7 1 7 1 7 2.42 -2.30 1.95 -1.84 2.14 -2.02 0.00 0.00 0.09 -0.09 0.09 -0.09 0.50 -0.50 0.21 -0.21 0.49 -0.49 0.00 0.00 -0.02 0.02 -0.02 0.02 0.21 -0.71 0.31 -0.52 0.15 -0.64 0.00 0.00 0.10 -0.01 0.10 -0.01 6 7 8 9 10 11 12 13 7 5 6 7 8 9 10 11 12 13 8 5 6 7 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 16 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. 17 MEMBER END FORCES STRUCTURE TYPE = SPACE ----------------ALL UNITS ARE -- MTON METE MEMBER LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z 8 1 7 1 7 1 7 1 7 1 7 1 7 2.07 -1.95 2.25 -2.13 1.78 -1.66 1.81 -1.70 2.39 -2.28 2.42 -2.31 -0.09 0.09 -0.09 0.09 0.03 -0.03 -0.03 0.03 0.03 -0.03 -0.03 0.03 0.36 -0.36 0.64 -0.64 -0.06 0.06 -0.01 0.01 0.87 -0.87 0.91 -0.91 0.02 -0.02 0.02 -0.02 0.00 0.00 0.01 -0.01 0.00 0.00 0.01 -0.01 0.22 -0.59 0.06 -0.70 0.47 -0.41 0.44 -0.43 -0.07 -0.80 -0.10 -0.82 -0.10 0.01 -0.10 0.01 0.03 0.00 -0.03 0.00 0.03 -0.01 -0.03 0.00 2 8 2 8 2 8 2 8 2 8 2 8 2 8 2 8 2 8 2.42 -2.30 2.07 -1.95 2.25 -2.13 1.96 -1.84 2.13 -2.02 1.82 -1.71 1.79 -1.67 2.41 -2.30 2.38 -2.26 0.00 0.00 0.09 -0.09 0.09 -0.09 -0.09 0.09 -0.09 0.09 0.03 -0.03 -0.03 0.03 0.03 -0.03 -0.02 0.02 0.47 -0.47 0.35 -0.35 0.62 -0.62 0.20 -0.20 0.47 -0.47 -0.01 0.01 -0.06 0.06 0.88 -0.88 0.83 -0.83 0.00 0.00 -0.02 0.02 -0.02 0.02 0.02 -0.02 0.02 -0.02 -0.01 0.01 0.00 0.00 -0.01 0.01 0.00 0.00 0.25 -0.71 0.24 -0.59 0.09 -0.70 0.33 -0.53 0.17 -0.64 0.45 -0.44 0.48 -0.42 -0.06 -0.81 -0.04 -0.80 0.00 0.00 0.10 -0.01 0.10 -0.01 -0.10 0.01 -0.10 0.01 0.03 0.00 -0.03 0.01 0.03 0.00 -0.03 0.00 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 7.30 -6.33 5.46 -4.48 5.35 -4.37 7.11 -6.13 6.99 -6.01 6.18 -5.20 6.67 -5.69 5.78 -4.81 -0.02 0.02 0.27 -0.27 0.27 -0.27 -0.30 0.30 -0.30 0.30 0.07 -0.07 -0.10 0.10 0.07 -0.07 -0.12 0.12 -0.16 0.16 -0.11 0.11 -0.14 0.14 -0.08 0.08 -0.22 0.22 -0.21 0.21 -0.04 0.04 0.01 -0.01 -0.03 0.03 -0.02 0.02 0.03 -0.03 0.04 -0.04 -0.01 0.01 0.01 -0.01 0.00 0.00 0.33 0.10 0.39 0.22 0.28 0.14 0.34 0.18 0.23 0.10 0.51 0.31 0.49 0.30 0.12 0.02 -0.03 -0.06 0.57 0.43 0.57 0.43 -0.61 -0.53 -0.61 -0.53 0.15 0.10 -0.20 -0.19 0.16 0.10 9 10 11 12 13 9 5 6 7 8 9 10 11 12 13 10 5 6 7 8 9 10 11 12 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 17 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. 18 MEMBER END FORCES STRUCTURE TYPE = SPACE ----------------ALL UNITS ARE -- MTON METE MEMBER 11 LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z 13 3 9 6.28 -5.30 -0.10 0.10 -0.03 0.03 0.02 -0.02 0.11 0.01 -0.20 -0.19 5 4 10 4 10 4 10 4 10 4 10 4 10 4 10 4 10 4 10 6.50 -5.52 6.60 -5.62 6.49 -5.51 4.95 -3.97 4.84 -3.87 6.15 -5.17 5.65 -4.67 5.79 -4.81 5.30 -4.32 0.01 -0.01 0.30 -0.30 0.30 -0.30 -0.27 0.27 -0.27 0.27 0.10 -0.10 -0.07 0.07 0.10 -0.10 -0.07 0.07 -0.22 0.22 -0.20 0.20 -0.15 0.15 -0.23 0.23 -0.17 0.17 -0.27 0.27 -0.28 0.28 -0.10 0.10 -0.11 0.11 0.00 0.00 -0.03 0.03 -0.03 0.03 0.03 -0.03 0.03 -0.03 -0.01 0.01 0.01 -0.01 0.00 0.00 0.01 -0.01 0.44 0.39 0.40 0.36 0.29 0.27 0.45 0.40 0.34 0.32 0.55 0.47 0.57 0.48 0.18 0.19 0.20 0.21 0.01 0.05 0.60 0.53 0.60 0.53 -0.58 -0.44 -0.58 -0.44 0.18 0.19 -0.17 -0.10 0.19 0.19 -0.17 -0.10 5 13 5 13 5 13 5 13 5 13 5 13 5 13 5 13 5 13 4.00 -2.49 2.69 -1.18 2.63 -1.12 4.55 -3.04 4.48 -2.97 3.42 -1.91 3.97 -2.47 3.20 -1.69 3.75 -2.24 0.00 0.00 0.20 -0.20 0.20 -0.20 -0.21 0.21 -0.21 0.21 0.06 -0.06 -0.07 0.07 0.06 -0.06 -0.07 0.07 -0.35 0.35 -0.30 0.30 -0.28 0.28 -0.29 0.29 -0.27 0.27 -0.32 0.32 -0.31 0.31 -0.26 0.26 -0.25 0.25 -0.02 0.02 -0.03 0.03 -0.03 0.03 0.01 -0.01 0.01 -0.01 -0.02 0.02 -0.01 0.01 -0.02 0.02 0.00 0.00 0.62 1.40 0.55 1.19 0.50 1.13 0.52 1.16 0.48 1.10 0.59 1.25 0.59 1.24 0.44 1.05 0.43 1.04 0.00 -0.02 0.64 0.54 0.64 0.53 -0.65 -0.57 -0.65 -0.57 0.19 0.15 -0.20 -0.18 0.19 0.14 -0.20 -0.19 6 14 6 14 6 14 3.73 -2.22 4.38 -2.87 4.31 -2.80 0.01 -0.01 0.21 -0.21 0.21 -0.21 -0.30 0.30 -0.26 0.26 -0.24 0.24 -0.02 0.02 -0.03 0.03 -0.03 0.03 0.54 1.18 0.47 1.02 0.42 0.96 0.02 0.04 0.66 0.59 0.66 0.59 6 7 8 9 10 11 12 13 12 5 6 7 8 9 10 11 12 13 13 5 6 7 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 18 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. 19 MEMBER END FORCES STRUCTURE TYPE = SPACE ----------------ALL UNITS ARE -- MTON METE MEMBER LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z 8 6 14 6 14 6 14 6 14 6 14 6 14 2.53 -1.02 2.46 -0.95 3.81 -2.30 3.26 -1.75 3.58 -2.07 3.03 -1.52 -0.20 0.20 -0.20 0.20 0.07 -0.07 -0.05 0.05 0.07 -0.07 -0.05 0.05 -0.27 0.27 -0.25 0.25 -0.28 0.28 -0.28 0.28 -0.22 0.22 -0.22 0.22 0.01 -0.01 0.01 -0.01 -0.02 0.02 -0.01 0.01 -0.02 0.02 -0.01 0.01 0.49 1.05 0.45 1.00 0.53 1.10 0.54 1.11 0.38 0.90 0.39 0.91 -0.63 -0.52 -0.63 -0.52 0.21 0.20 -0.18 -0.13 0.20 0.20 -0.18 -0.14 7 9 7 9 7 9 7 9 7 9 7 9 7 9 7 9 7 9 1.63 0.86 1.17 0.97 1.46 0.68 1.36 0.78 1.65 0.49 0.89 1.25 0.95 1.19 1.87 0.27 1.92 0.22 1.70 2.34 1.44 2.04 1.47 2.00 1.45 2.02 1.49 1.98 1.40 2.07 1.41 2.07 1.52 1.95 1.53 1.95 0.00 0.00 0.01 -0.01 0.01 -0.01 -0.01 0.01 -0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.02 -0.02 -0.02 -0.02 0.02 0.02 0.02 0.02 -0.01 0.00 0.01 0.01 -0.01 -0.01 0.01 0.00 0.71 -2.42 0.52 -2.11 0.64 -2.04 0.59 -2.08 0.70 -2.00 0.41 -2.19 0.43 -2.18 0.80 -1.94 0.82 -1.92 9 11 9 11 9 11 9 11 9 11 9 11 9 11 9 11 2.14 0.26 1.61 0.32 1.74 0.18 1.70 0.23 1.83 0.10 1.48 0.44 1.51 0.42 1.93 0.00 2.70 1.19 2.19 0.94 2.18 0.94 2.18 0.94 2.18 0.95 2.19 0.94 2.19 0.94 2.18 0.95 0.00 0.00 0.02 -0.02 0.02 -0.02 -0.02 0.02 -0.02 0.02 0.00 0.00 -0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 -0.05 -0.02 -0.05 -0.02 0.06 0.04 0.06 0.03 -0.01 0.00 0.02 0.02 -0.01 0.00 2.35 0.59 1.91 0.50 1.92 0.48 1.91 0.49 1.92 0.47 1.90 0.52 1.90 0.52 1.94 0.45 9 10 11 12 13 14 5 6 7 8 9 10 11 12 13 15 5 6 7 8 9 10 11 12 C:\Staad2010\AyMA\Matamoros\Floculador\Escaleras\Escaleras.anl Page 19 of 68 Tuesday, August 10, 2010, 04:54 PM STAAD SPACE -- PAGE NO. 20 MEMBER END FORCES STRUCTURE TYPE = SPACE ----------------ALL UNITS ARE -- MTON METE MEMBER 16 LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z 13 9 11 1.96 -0.03 2.18 0.95 -0.01 0.01 0.00 0.00 0.02 0.02 1.93 0.45 5 11 13 11 13 11 13 11 13 11 13 11 13 11 13 11 13 11 13 0.40 -0.40 0.22 -0.22 0.34 -0.34 0.30 -0.30 0.42 -0.42 0.11 -0.11 0.14 -0.14 0.50 -0.50 0.52 -0.52 -1.15 2.22 -0.97 1.89 -0.90 1.83 -0.92 1.85 -0.86 1.78 -1.03 1.96 -1.02 1.94 -0.81 1.73 -0.79 1.72 0.00 0.00 0.02 -0.02 0.02 -0.02 -0.02 0.02 -0.02 0.02 0.00 0.00 -0.01 0.01 0.00 0.00 -0.01 0.01 0.00 0.00 -0.01 0.01 -0.01 0.01 0.02 -0.02 0.02 -0.02 0.00 0.00 0.01 -0.01 0.00 0.00 0.01 -0.01 -0.01 0.02 0.01 -0.04 0.02 -0.04 -0.03 0.06 -0.03 0.06 0.00 0.00 -0.02 0.03 0.00 0.00 -0.01 0.02 -0.59 -1.44 -0.50 -1.21 -0.48 -1.15 -0.49 -1.18 -0.47 -1.12 -0.52 -1.27 -0.52 -1.26 -0.45 -1.07 -0.45 -1.06 8 10 8 10 8 10 8 10 8 10 8 10 8 10 8 10 8 10 1.61 0.88 1.35 0.79 1.63 0.52 1.16 0.98 1.44 0.70 0.96 1.19 0.90 1.24 1.89 0.26 1.83 0.31 1.71 2.33 1.47 2.01 1.50 1.97 1.45 2.03 1.48 1.99 1.42 2.06 1.41 2.06 1.54 1.94 1.53 1.94 0.00 0.00 0.01 -0.01 0.01 -0.01 -0.01 0.01 -0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 -0.01 -0.02 -0.02 -0.02 -0.02 0.02 0.01 0.02 0.01 -0.01 -0.01 0.01 0.00 -0.01 -0.01 0.01 0.00 0.71 -
Similar documents
Fish - Embroidery Technologies
4 Fresh Water Fish FN: 508c SIZE: 2.50" x 3.70" STITCHES: 11023 COLORS: 2 Thread Specifications (15): 1. WHITE - 0010: 2. Yellow: 3. Silver: 4. BLACK - 0020: 5. WHITE - 0010: 6. Yellow: 7. Green: 8...
More information