Abrasion-resistant tubes

Edizione Aprile 2008
Sales Network
Abrasion-resistant tubes
Branch offices:
ENGINEERING BAR
Division:
special structural steels - for tools and dies - stainless steels
Milan:
Turin:
Turin:
Brescia:
Brescia:
20043 Arcore - Via Alessandro Polini, 450 - Telephone +39 039.6183.301
10043 Orbassano - Strada Torino, 25/1 - Telephone +39 011.9007611
10040 Rivalta di Torino - Via Coazze, 12 - Tel. +39 011.9032912
25100 Brescia - Via Stassano, 10 (Ind. area) - Telephone +39 030.2688811
25010 Visano - Via dell’Industria, 31 - Tel. +39 030.9952838
Uff. Comm.: Lumezzane - Via P. Bolognini, 19 - Tel. +39 030.8971718
Vicenza: 36040 Grisignano di Zocco - Via Monte Ortigara, 25 - Telephone +39 0444.61331
Bologna: 40012 Lippo di Calderara di Reno - Via San Vitalino, 40/A - Telephone +39 051.317101
TUBES Division :
TenarisDalmine authorised distributors, stainless engineering, tubes for drawn and lapped cylinders.
Brescia: 25100 Brescia - Via Stassano, 10 (Ind. area) - Telephone +39 030.2688811
Bologna: 40012 Lippo di Calderara di Reno - Via F.lli Rosselli, 9 - Tel. +39 051.725056
Padua: 35010 Limena - Via I° Maggio, 11 - Telephone +39 049.8849611
CHROME BAR Division:
Padua: 35010 Limena - Via I° Maggio, 11 - Telephone +39 049.8849611
COLD WORK Division :
drawn, ground and peeled products, in traditional steels, carbon and alloy steels and stainless steels
Milan: 20095 Cusano Milanino - Via Bellini, 2 - Telephone +39 02.6199341
STAINLESS STEEL Division : stainless steels - long products and profiles
Milan: 20043 Arcore - Via Alessandro Polini, 450 - Telephone +39 039.6183.306
Abrasion-resistant tubes
NASPipe tubes
Milan
20040 Cambiago (Italy) - Via R. Sanzio 7
Tel. +39 02.95347200 - Fax +39 02.95347260
ABRATUBE 400 tubes
Modena
41100 Modena (Italy) - Via S. Allende 63
Tel. +39 059.251616 - Fax +39 059.252232
WEAR-RESISTANT PLATE Division :
Milan: 20040 Cambiago - Via R. Sanzio, 7 - Telephone +39 02.95347200
Modena: 41100 Modena - Via Salvador Allende, 63 - Telephone +39 059.251616
Verona: 37139 Verona - Via Meccanica, 19 (i.a. Basson) - Tel. +39 045.8510088
Wear-Resistant Plates Division:
TRoll formed and welded
CREUSABRO ® tubes
®
Accessories
®
IA
LI
Tubes for concrete pumps
C
T
EC I AL I P E R U
AC
EN
IMS S.p.A. - Headquarters and Management
Via Alessandro Polini, 450 - 20043 Arcore - Milan - Telephone +39 039.6183.1
Web site: www.ims.it www.paginegialle.it/imsspa E-mail: ims.italia@ims-group.com
IS
P
IS
P
SI
C
SI
LI
AC
IA
T
EC I AL I P E R U
EN
IMS S.p.a
Headquarters and Management department
Via A. Polini 450 - 20043 Arcore (Milan)Italy
E-mail: ims.italia@ims-group.com
www.ims.it
GROUP
Fittings
NASPipe elbow sections
Through the induction hardening process, we are able to
manufacture elbow sections in a wide range of sizes,
including both standard sizes (3D and 5D) and made-tomeasure products. Through this method, we are also able
to guarantee a high level of precision which is absolutely
critical for this part of the tube.
Through the versatility of the induction hardening process,
as shown below, end-users can considerably reduce
installation time and welding costs, thus guaranteeing fewer
defects on the tubes.
Other solutions
The ABRASERVICE division
of IMS S.p.A. can offer elbow
sections with a special
internal abrasion resistant
coating (60 HRC hard-facing
material).
Curve tradizionali
Curve NASPipe
realizzati per induzione
Flanges
All our tubes can be supplied either as fixed flange or with special pipe fittings (Victaulic
or Dresser), available upon request.
Special components
It is possible to manufacture a number of special parts using our abrasion-resistant tubes:
- joints with longitudinal extensions
- Y-fittings
- Pipe fittings
- Inspection tubes
- etc…
10
GROUP
GROUP
Abrasionresistant tubes
Putzmeister pump arm, height: 36 m
Index
Foto 4
Abrasion-resistant tubes
page
3
NASPipe tubes
page
5
ABRATUBE 400 tubes
page
7
Roll formed and welded
CREUSABRO® tubes
page
7
Tubes for concrete pumps
page
8
Accessories
page 10
Putzmeister pump arm, different models
9
2
GROUP
GROUP
TUBES
for concrete
pumps
Abrasionresistant tubes
The
ABRASERVICE
Division of
IMS S.p.A.
offers a wide range
Coal mining
• Coal handling
• Pulp handling
• General materials
handling
of abrasionresistant tubes
Available in:
ABRATUBE 400
(from 6 m length)
Ø nom. 4”
Ø ext. 108 mm. x 4,5 mm
Ø nom. 5”
Ø ext. 133 mm x 4,7 mm
NASPipe
(from 6 m length)
Ø nom. 4”
Ø ext. 108 mm. x 3,6 mm
Ø nom. 5”
Ø ext. 133 mm x 4,7 mm
replying to all your
Fittings:
needs. Thanks to
our manufacturing
skills we are able
Power stations
• Heavy ash handling
• Fly ash handling
400 HB steel flanges for elbow sections for concrete pumps, Ø 100 mm and 125 mm.
to offer different
solutions, both in
terms of design
and in terms of
material
combinations.
Mines
• Pure mineral and sterile
handling
• General materials
handling
3
Ø 100
Ø 125
These 400 HB steel flanges can solve welding problems and give the same abrasion
resistance as the tube itself.
8
GROUP
GROUP
ABRATUBE 400
tube
Applications
The main advantage of this tube is that while being highly
abrasion resistant (minimum 360 HB), they are also very
easy to install.
The tube can be welded with basic electrodes, it is easy
to work on them by attaching flanges, carrying out headto-head welding etc.
Features
Hardness: 3 6 0 / 4 0 0 H B
(HRC 34 minimum)
Rm:
1100-1400N/mm 2
Re:
800-1100N/mm 2
A5:
minimo 10%
Resistence to temperature:
maximum 500°C
Rolled and
welded
CREUSABRO ®
TUBES
Size range
The ABRATUBE 400
seamless tube is produced
through the extrusion
process. Thanks to the
flexibility of this process, we
are able to supply to our
clients a wide range of sizes
between ø 70 and 219,1
mm, with a wall thickness
ranging from 4,5 to 60 mm.
We also supply tubes in
standard lengths, as well as
elbows and parts according
to customer specifications.
For larger diameter material than the ABRATUBE® 400 tubes,
(P)
we can offer® rolled and welded CREUSABRO 4800 or
CREUSABRO 8000 steel tubes. Elbow sections are available
(either pressed or segmented) according to the dimensions
required.
Size range
The available size range of the tubes depends on thickness,
diameter and material spcification. For more information,
please contact us.
7
Cement plants
• Pneumatic transport of
cement to the storage
silos
• Clinker handling
• General materials
handling
THE RIGHT CHOICE
NASPipe Tube:
Internal hardness of 600 HB obtained
through induction.
Life 5 times longer as compared to
mild steel.
Up to 12 metres long.
Nominal diameter from
approximately 90 to 500 mm.
ABRATUBE 400 tube:
Seamless extruded tubes with
minimum hardness of 360 HB.
Life 3 times longer as compared to
mild steel.
Extremely easy installation.
Nominal diameter from
approximately 70 to 220 mm.
Dredging
• Hydraulic transport of
the mined materials
• Pulp suction
Rolled and welded tube:
CREUSABRO ® 4800 ( P ) and
CREUSABRO ® 8000 quality
guarantee.
Hardness according to the material
brand specification.
Complete manufacture by IMS S.p.A,
ABRASERVICE division, from
CREUSABRO® plates.
The range includes large thicknesses
and constitutes the ideal choice for
diameters under 500 mm.
Other applications
• Wood chip
• Cement
• Cereals
• Graphite powders for
industrial electrodes
Tube for concrete pumps:
Available in 2 grades : 360 HB and
600 HB.
Nominal diameter : 4” and 5”.
Life 3 to 5 times longer than for mild
steel.
4
GROUP
GROUP
NASPipe
tubes
NASPipe
tubes
The NASPipe tubes are
manufactured on an automatic
production line using induction
hardening technology with the
purpose of producing seamless
steel tube with good abrasion
resistant properties.
The tube is slowly heated and
then quickly cooled with water
jets, thus acquiring its ability to
resist the most severe cases of
abrasion in the field of the
pneumatic and hydraulic
transport of inert materials.
Compared to mild steel tubes,
the NASPipe tubes represent
an economical solution avoiding
the necessity of frequent
interventions on often
inaccessible installations. As
they can be up to 12 metres
long, the NASPipe tubes also
make it possible to avoid the
use of generally expensive
flanges. Their life expectancty
is 5 times longer than mild steel
tubes. The maximum operating
temperature is 160 °C.
ATTENTION
The NFA article No. 49281 of
December 1992 regulating
tubular dimensions does not
apply to NASPipe tubes or
elbows, whose dimensions are
regulated by specific criteria.
INTERNAL
WALL SECTION
700
600
60
500
50
400
40
300
30
od
20
40
60
80
Scala di durezza Rockwell C.
Scala di durezza Brinnel
VERY DENSE MARTENSITE
DENSE MARTENSITE
id
Percentuale dello spessore della parete dei tubi.
BAINITE / FERRITE
NASPipe fittings are also available (see
page 8)
FERRITE / PERLITE
MAGNIFICATION X 200
MAGNIFICATION X 10
EXTERNAL
WALL SECTION
Size range
Due to the highly precise heat
treatment to which these tubes
are subjected, they can obtain
a relatively thick martensitic
structure of 600 HB up to half
of the wall thickness and a
ferritic-pearlitic structure of
about 300 HB for the rest of
the wall.
5
As a result, the internal wall of
NASPipe tubes has a very good
abrasion resistance, while the
outside retains a good level of
toughness and weldability. The
tubes will then present a
monolithic structure making it
easier to measure thickness
using ultrasound technology.
External diameter in mm
89 114 141 168 219 273 324 356 406 457 508
Wall thickness in mm
7,6 8,6 9,5 7,1 8,2 9,3 9,53 9,53 9,53 9,53 9,53
Standard length in metres
6
6
12
12
12
12
12
12
12
Net weight in Kg
15
22
31
28
43
61
74
81
93 105 117
6
12
12