docConnectivity Toolkit 2.1 User`s Guide
download 
Report Transcription
Connectivity Toolkit 2.1 User`s Guide
Connectivity Toolkit 2.1 User’s Guide 10300 CAMPUS POINT DRIVE SAN DIEGO, CALIFORNIA 92121 U.S.A. Visit us at www.kyocera-wireless.com 80-B6696-3EN, Rev. A This manual is based on the production versions of the Connectivity Toolkit. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. Patents: 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 5,193,094 5,257,283 5,265,119 5,267,261 5,267,262 5,280,472 5,283,536 5,289,527 5,307,405 5,228,054 5,309,474 5,337,338 5,339,046 5,341,456 5,383,219 5,392,287 5,396,516 D356,560 5,408,697 5,414,728 5,414,796 5,416,797 5,426,392 5,437,055 D361,065 5,442,322 5,442,627 5,452,473 5,461,639 5,469,115 5,469,471 5,471,497 5,475,870 5,479,475 5,483,696 5,485,486 5,487,175 5,490,165 5,497,395 5,499,280 5,504,773 5,506,865 5,509,015 5,509,035 5,511,067 5,511,073 5,513,176 5,515,177 5,517,323 5,519,761 5,528,593 5,530,928 5,533,011 5,535,239 5,539,531 5,544,196 5,544,223 5,546,459 5,548,812 5,559,881 5,559,865 5,561,618 5,564,083 5,566,000 5,566,206 5,566,357 5,568,483 5,574,773 5,574,987 D375,740 5,576,662 5,577,022 5,577,265 D375,937 5,588,043 D376,804 5,589,756 5,590,069 5,590,406 5,590,408 5,592,548 5,594,718 5,596,570 5,600,754 5,602,834 5,602,833 5,603,096 5,604,459 5,604,730 5,608,722 5,614,806 5,617,060 5,621,752 5,621,784 5,621,853 5,625,876 5,627,857 5,629,955 5,629,975 5,638,412 5,640,414 5,642,398 5,644,591 5,644,596 5,646,991 5,652,814 5,654,979 5,655,220 5,657,420 5,659,569 5,663,807 5,666,122 5,673,259 5,675,581 5,675,644 5,680,395 5,687,229 D386,186 5,689,557 5,691,974 5,692,006 5,696,468 5,697,055 5,703,902 5,704,001 5,708,448 5,710,521 5,710,758 5,710,768 5,710,784 5,715,236 5,715,526 5,722,044 5,722,053 5,722,061 5,722,063 5,724,385 5,727,123 5,729,540 5,732,134 5,732,341 5,734,716 5,737,687 5,737,708 5,742,734 D393,856 5,748,104 5,751,725 5,751,761 5,751,901 5,754,533 5,754,542 5,754,733 5,757,767 5,757,858 5,758,266 5,761,204 5,764,687 5,774,496 5,777,990 5,778,024 5,778,338 5,781,543 5,781,856 5,781,867 5,784,406 5,784,532 5,790,589 5,790,632 5,793,338 D397,110 5,799,005 5,799,254 5,802,105 5,805,648 5,805,843 5,812,036 5,812,094 5,812,097 5,812,538 5,812,607 5,812,651 5,812,938 5,818,871 5,822,318 5,825,253 5,828,348 5,828,661 5,835,065 5,835,847 5,839,052 5,841,806 5,842,124 5,844,784 5,844,885 5,844,899 5,844,985 5,848,063 5,848,099 5,850,612 5,852,421 5,854,565 5,854,786 5,857,147 5,859,612 5,859,838 5,859,840 5,861,844 5,862,471 5,862,474 5,864,760 5,864,763 5,867,527 5,867,763 5,870,427 5,870,431 5,870,674 5,872,481 5,872,774 5,872,775 5,872,823 5,877,942 5,878,036 5,870,631 5,881,053 5,881,368 5,884,157 5,884,193 5,884,196 5,892,178 5,892,758 5,892,774 5,892,816 5,892,916 5,893,035 D407,701 5,898,920 5,903,554 5,903,862 D409,561 5,907,167 5,909,434 5,910,752 5,911,128 5,912,882 D410,893 5,914,950 5,915,235 5,917,708 5,917,811 5,917,812 5,917,837 5,920,284 5,920,834 D411,823 5,923,650 5,923,705 5,926,143 5,926,470 5,926,500 5,926,786 5,926,786 5,930,230 5,930,692 Other patents pending. FCC/IC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and user’s authority to operate the equipment. Warning Use only Kyocera Wireless Corp. approved accessories with Kyocera Wireless Corp. phones. Use of any unauthorized accessories may be dangerous and will invalidate the phone warranty if the unauthorized accessories cause damage or defect to the phone. ACN 093 453 037 Kyocera is a registered trademark of Kyocera Corporation. QCP is a trademark of Kyocera Wireless Corp. QUALCOMM is a registered trademark of QUALCOMM Incorporated. Microsoft Outlook and Windows Explorer are trademarks of Microsoft Corporation. Meeting Maker is a registered trademark of On Technology Corporation. CasioLink is a registered trademark of Casio Inc., U.S.A. QuickLink Mobile and Quick Link Fax are registered trademarks of Smith Micro. Other product and brand names may be trademarks or registered trademarks of their respective owners. Copyright © 1999-2000 Kyocera Wireless Corp. All rights reserved. Printed in the United States of America. 80-B6696-3EN, Rev. A Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing the Connectivity Toolkit software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting your phone to your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting up your phone as a wireless modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Getting help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Managing multiple phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Matching phone documents and connected phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Phones that work with the Connectivity Toolkit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Selecting a COM port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Phone Detected window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Application icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Coolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 General tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Sync Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Contact Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Opening Contact Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 The Contact window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Contact list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Contact details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Creating/editing contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Name and Number tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Internet tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Notes tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Working with multiple phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Working with area codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Locking/unlocking secret numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Synchronizing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Synchronizing a phone document to a connected phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Sync Contacts with phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Synchronizing contacts diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Syncing two phone documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Importing Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Importing contact information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Importing calendar information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Phone Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Phone Monitor keymap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Phone Monitor display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Using Phone Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Adjusting Phone Monitor refresh rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Adjusting Phone Monitor window size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Ringer Downloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 The Ringers window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Downloading ringers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Connectivity Toolkit User’s Guide 1 AT Command Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Modes of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Command Line Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Basic Sets of Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Types of Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Result Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Basic AT Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 S-Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Basic Action Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Extended Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Fax Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Fax Action Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Cellular CDMA Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Cellular AT Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 2 Connectivity Toolkit User’s Guide Introduction Introduction Thank you for selecting the Connectivity Toolkit. This product helps you manage phone contacts from the convenience of your desktop or laptop computer. You can make changes from your computer, then synchronize them to your phone. The included data cable also lets you set up your phone as a wireless modem. The Connectivity Toolkit features: n Contact Manager – Manage phone numbers and contact information from your computer. n Phone Monitor – See the phone’s display on your computer and control phone functions from your keyboard. n Ringer Downloader – Download your favorite ringers into your phone (QCP 3035 series phone only). n Wireless Data feature – Set up your phone as a wireless modem to connect to the Internet or to send and receive faxes. Connectivity Toolkit contents The Connectivity Toolkit includes the following: n n n n Data cable Null modem adapter Connectivity Toolkit software (on CD-ROM) QuickLink Mobile™ 2000 software (on CD-ROM) n n n n QuickLink Fax™ software (on CD-ROM) Quick Start Guide (on the insert card) Connectivity Toolkit User’s Guide (PDF file on CD-ROM) QuickLink Mobile and QuickLink Fax user’s guides (PDF files on CD-ROM) Installing the Connectivity Toolkit software To install the Connectivity Toolkit software, follow these steps: 1. Place the Connectivity Toolkit CD in your computer’s CD-ROM drive. The launcher automatically opens. If the launcher does not appear, open Windows Explorer® from the Start menu and open the CD-ROM drive (usually D or E). From there, open CDLaunch.exe to open the launcher. 2. Click Install Connectivity Toolkit in the launcher window. 3. Follow the installer instructions. When the install program finishes, a Kyocera folder is placed in the Programs directory in the Start menu. Note: While installing the Connectivity Toolkit, you may see some windows that refer to the software as the “Connectivity Toolkit 2.” Connectivity Toolkit 2 is the general name of the program, not the version number. You are installing Connectivity Toolkit version 2.1 and you will see other windows showing this version number. Connectivity Toolkit User’s Guide 3 Introduction Connecting your phone to your computer The Connectivity Toolkit comes with a data cable designed to connect your QCP™ 2027, QCP 2035, QCP 2035a, or QCP 3035 series phone to your computer through the COM port. 1. Turn the phone and your computer on. 2. Attach the data cable’s 9-pin (DB-9) connector to the COM port (RS-232) on your computer. If connecting to a personal digital assistant (PDA) device, use the included null modem adapter. Screws Power Outlet Power Adapter Plug Data cable If the computer has a 25-pin serial port plug-in, you may need an adapter to connect the data cable’s 9-pin connector. Note: It is recommended you charge the phone while transferring data to avoid data loss because of a low battery. The data cable has a power outlet that can be used to charge the phone while the phone is connected to the data cable (shown above). The data cable power outlet only accepts the following charging accessories: Model TXCLA091/TXCLA00911 Car Power Adapter or Model TXTVL091/TXTVL00911 Travel Charger. To shop online for phone accessories, visit the Kyocera Wireless Corp. Accessory Store at www.kyocera-wireless.com/store. To order by phone, call (800) 211-1537 (USA and Canada) or (510) 683-4004. Warning: Do not use the charging accessory provided with your QCP 2027, QCP 2035, and QCP 2035a series phone to charge the phone through the data cable power outlet. Damage will result when this or any other unauthorized charging accessory is applied to the data cable power outlet. 3. Insert the other end of the data cable (arrow up) into your phone. Note: When you open the Connectivity Toolkit for the first time, you are prompted to select a COM port. Select the COM port the phone is connected to and click OK. 4 Connectivity Toolkit User’s Guide Introduction Setting up your phone as a wireless modem The Connectivity Toolkit includes an application called QuickLink Mobile that helps you set up your phone as a wireless modem. To install QuickLink Mobile, place the Connectivity Toolkit CD in your CD-ROM and select Install QuickLink Mobile. Warning: To use QuickLink Mobile or QuickLink Fax, the Connectivity Toolkit must be closed while the phone is still connected. Doing so restores the phone to data mode. You may also power-cycle (turn off and on) the phone to return to data mode. To view the QuickLink Mobile user’s guide, click View Documentation on the CD. Getting help This user’s guide provides the basic information you need to use the Connectivity Toolkit. The Connectivity Toolkit has online help. To access it, select Help on the menu bar inside the Connectivity Toolkit software. If you need further assistance, contact the Kyocera Wireless Corp. Customer Care Center: n Phone: (800) 349-4478 (toll-free in the U.S.A. and Canada only) or (858) 882-1401 n Email: phone-help@kyocera-wireless.com n Web site: www.kyocera-wireless.com n Kyocera Wireless Corp., 10300 Campus Point Drive, San Diego, CA 92121 U.S.A. Connectivity Toolkit User’s Guide 5 Getting Started Getting Started Connectivity Toolkit applications include the Contact Manager, the Phone Monitor, and the Ringer Downloader. The Connectivity Toolkit also comes with wireless modem connection applications called QuickLink Mobile 2000 and QuickLink Fax. See the Connectivity Toolkit CD to access these applications. Managing multiple phones The Connectivity Toolkit lets you work with multiple phones by using connected phones and phone documents. Connected phone A connected phone is the phone actually connected to your computer through your data cable. When you connect your phone, the Connectivity Toolkit creates a phone document and names it with the phone number of the connected phone. Phone document When you connect a phone to the Connectivity Toolkit for the first time, the contacts in the phone are automatically transferred to the Connectivity Toolkit as a phone document. Once the phone document is created, you can work with it any time whether the matching* phone is connected or not. *A match is when the phone’s and document’s model number, ESN, and phone number match. See the graphic below for an example of how a matched phone is listed in various dialogs. model number ESN phone number (Electronic Serial Number) Matching phone documents and connected phones A phone document is always matched with a connected phone. The graphic above shows how the Connectivity Toolkit lists a matched phone: the model number, the ESN, and phone number with the area code. This matched number appears in the Open Phone list (see below), and on any phone document you open. To synchronize a phone document to a connected phone, the connected phone must match the phone document. If the Sync Current icons on the Coolbar are active (not grayed-out), then your phone document and connected phone match, and you can synchronize between them. If the sync icons are not active, click Open Phone. The Open Phone dialog appears (shown in “Working with multiple phones” on page 15). Open the phone document that matches the connected phone. 6 Connectivity Toolkit User’s Guide Getting Started Phones that work with the Connectivity Toolkit The Connectivity Toolkit is backward compatible with several earlier model Kyocera Wireless Corp. QCP phones. Not all features are available on these phones. Earlier model phones also require different data cables. Visit www.kyocera-wireless.com for more information. Phone Type Contacts Phone Monitor Wireless Modem QCP 3035 Yes Yes Yes QCP 2027, 2035, and 2035a Yes Yes Yes QCP 860™, 1960™, 2760™ Yes* No Yes QCP 820™, 1920™ Yes* No No QCP 2700™ Yes* No No** Yes* No No ® ® QCP 800 , 1900 , Q 800®, Q 1900® * With some limitations. ** Depending on your service provider. Selecting a COM port When you open the Connectivity Toolkit for the first time, you’ll be prompted to select a COM port (shown below). Use the drop-down list to select the COM port your phone is connected to, then click OK. Phone Detected window Whenever you connect a phone that does not match the current phone document, the Phone Detected window opens. This window asks if you want to keep working with the current phone document or change to the newly detected phone. Choose the newly detected phone or the current phone document. Then click OK. Connectivity Toolkit User’s Guide 7 Getting Started If you choose to work with the newly detected phone, you’ll be prompted to save any changes you made to the current phone document. Note: The phone you wish to work with must be on the COM port you selected (see “Connecting your phone to your computer” on page 4.). If it is not, please change the COM port in the Preferences dialog (see “General tab” on page 9). Application icons When you open the Connectivity Toolkit you’ll see icons on the left side of the window. Click the icons to open the application you want to work with. Contact Manager icon Phone Monitor icon Ringer Downloader icon Coolbar The Coolbar™ helps you quickly perform tasks in the Connectivity Toolkit. The Coolbar changes depending on the application you are in. Contact Manager Coolbar 8 Connectivity Toolkit User’s Guide Getting Started Phone Monitor Coolbar Ringer Downloader Coolbar Preferences Use the Preferences window to change various options in the Connectivity Toolkit. Click Edit > Preferences to open the Preferences dialog. click the tab you want to work with. Each tab is explained below. General tab n n n General pane – Check the Prompt me when I close the Connectivity Toolkit checkbox if you want to be prompted before closing the Connectivity Toolkit. Phone Connection box – Use the drop-down list to select a COM port. Toolbar box – Select the size of the Coolbar icons. Connectivity Toolkit User’s Guide 9 Getting Started Sync Tab The Sync tab allows you to set merge-sync priorities for synchronizing data between a connected phone and a phone document, or between two phone documents. 10 Connectivity Toolkit User’s Guide Getting Started Sync Tab Preferences These are the merge/sync priorities: Keep items in phone document and in phone: Information transfers to the connected phone without overwriting existing information*. For syncs between my phone and my phone document Document has priority: Information transferred from the phone document has priority over the connected phone. Phone has priority: Information transferred to the connected phone has priority over the phone document. Keep items in both phone documents: Information transfers between phone documents without overwriting any information. For syncs between two phone documents Current document has priority: Information transferred between the current phone document has priority over the selected phone document. Selected document has priority: Information transferred between the selected phone document has priority over the current phone document. *Information transfer without overwriting may cause duplicate records. An example of this would be: n contact in phone and contact on document have same name but different capitalization (John 555-1212, JOHN 555-1212) n contact in phone and contact on document have different numbers but same name n extra spaces in same contact name To resolve these conflicts, use one of the options listed above. Synchronizing is explained in more detail in “Synchronizing Contacts” on page 18, and shown graphically in “Synchronizing contacts diagram” on page 19. Connectivity Toolkit User’s Guide 11 Contact Manager Contact Manager The Contact Manager helps you manage your phone number information (contacts) from your desktop or laptop computer. This section describes how to use the Contact Manager. Opening Contact Manager Click the Contact Manager icon to open the Contact Manager application (if it is not already open – the Contact Manager window opens by default). The Contact window The Contact window has two panes. The left pane shows the contact list. The right pane displays the details for a selected contact. The right column of the left pane is left blank on purpose. Contact list The Contact list displays your contacts by name. Contacts are viewed by specific groups. Click View > Contact Type to select a view. The groups include: n Business – Displays all business contacts n Personal – Displays all personal contacts n Default – Displays contacts labeled as default n All – Displays all contacts 12 Connectivity Toolkit User’s Guide Contact Manager Contact details The details of a contact are displayed in the pane to the right of the contact list. They include name and address, phone numbers, Internet address, and email address. The contact may also include the following information: n Primary Number – Indicates that the phone number is the primary number. When the contact is synchronized to the phone, this number is dialed if the contact is selected. n Speed dial position – Indicates that this number has a speed dial shortcut. n Secret – Indicates the number is secret. Contact Manager menus You will find the menu structure for the Contact Manager listing all menus and sub-menus in the online help. Right-click shortcut menu The Contact Manager has several shortcuts allowing you to quickly modify contacts by right-clicking them. Shortcuts and their functions are listed in the online help. Creating/editing contacts Use the New (Edit) Contact window to create new contacts or change information in existing contacts. To create a new contact, select File > New Contact or click a blank space in the Contact list. To edit an existing contact, click the existing contact in the Contact list. The New (Edit) Contact window opens. The window has three information tabs, explained below. Name and Number tab Fill in the applicable areas in the Name and Number tab. 1. Put a check in the This contact should be synced with the phone checkbox if you want this contact to be synchronized. 2. Fill in the Name and Address fields as needed. Connectivity Toolkit User’s Guide 13 Contact Manager 3. Use the Contact Type drop down menu to assign the contact a particular group. – Contact groups that can be assigned include Default, Personal, and Business. When the contact is tagged with a group name, it appears in the Contact list when that group is viewed. 4. Enter phone numbers in the phone number fields. Use the drop-down list on the left to classify the type of phone number. 5. Click the Details button next to each number to set specific attributes for that number. Setting phone number details is explained in the following section. The Internet and Notes tabs are explained on page 15. Setting phone number details The Phone Number Details window sets attributes for phone numbers within a specific contact. 1. Click the Details button next to the phone number to set phone number attributes. The Phone Number Details window opens. 2. Click the tab of the number you want to change. 3. Select the attributes for the number. Each is explained below: n Main Properties – Phone Number: Shows the phone number. The number can be changed here. – Type: Use the drop-down list to select a type for each phone number. Types include Home, Work, Mobile, Pager, and Fax. n Details – Speed Dial Position: Check this checkbox and use the drop-down list to select a speed dial position for this phone number. You may only select available speed dial numbers. – Primary Number: Check this checkbox to indicate that the phone number is a primary number. “Primary Number” is displayed in the contact. n Secrecy: Select “Secret” if you want the number to be secret. The default is “Not Secret.” 4. Click any of the other tabs to make changes to other phone numbers. 5. Click OK to exit the Phone Number Details window. 14 Connectivity Toolkit User’s Guide Contact Manager Internet tab Click the Internet tab and fill in the appropriate information in the fields for Internet addresses and email addresses. You are provided with two fields for each type of address. Notes tab Click the Notes tab and enter any notes you may have for this contact. The Notes field holds 250 characters. Notes do not appear in the contact window, but are synchronized to the phone. Working with multiple phones The Connectivity Toolkit allows you to manage multiple phones by using phone documents. Each phone document is matched with a connected phone. For more information, see “Synchronizing contacts diagram” on page 19. Opening a phone document 1. To open a phone document, click the Open Phone icon or select 2. File > Open... The Open Phone dialog opens. 3. Use the drop-down list to select a phone document. Phone documents are named with their associated or matched phone numbers (see above). The Connectivity Toolkit remembers every phone you ever connected to it. 4. Click OK. The contact list for the phone document opens. By using phone documents, it is possible to synchronize the contacts of one phone into another phone, or into several phones. This is explained in more detail in “Synchronizing contacts diagram” on page 19. Connectivity Toolkit User’s Guide 15 Contact Manager Working with area codes You may change area codes for phone numbers in a variety of ways: n Change one area code for another. n Add area codes to selected contacts. n Remove area codes from selected or all contacts. These methods are described below. Changing area codes 1. Select the contact(s) that need an area code change. 2. Right-click the contact, select Area Code, and select Change. The Change Area Code dialog opens. 3. Enter the old area code and the new area code in the provided text boxes. 4. Click OK. Adding an area code 1. Select the contact(s) that needs a new area code. 2. Right-click the contacts, select Area Code, and select Add. The Add Area Code window opens. 3. Enter the new area code. 4. Click OK. 16 Connectivity Toolkit User’s Guide Contact Manager Removing an area code 1. Select the contact(s) that need an area code removed. 2. Right-click the contacts, select Area Code, then select Remove. The Remove Area Code dialog opens. 3. Enter the area code you want to remove. 4. Click OK. Locking/unlocking secret numbers You can lock or unlock all the secret phone numbers in a phone document at once. The lock code used to unlock the secret number in a phone document is the same lock code used for the phone that created the phone document. The default lock code for QCP 2027, 2035, 2035a, and 3035 phones is usually the last four digits of your phone number. See your phone’s documentation or ask your service provider if you’re not sure. Unlocking secret numbers 1. Select Tools > Unlock. The Unlock window opens. 2. Enter the phone’s lock code. 3. Click OK. All the secret items for that phone document are now unlocked. Locking secret numbers To lock secret phone numbers in a phone document, select Tools > Lock Secret… All secret phone numbers for the active phone document are now locked. Connectivity Toolkit User’s Guide 17 Synchronizing Contacts Synchronizing Contacts Synchronizing is a way of transferring contacts and other information between the Connectivity Toolkit and your phone. There are two types of synchronizing: Synchronizing a phone document and a connected phone Contacts with Phone: This option synchronizes the current phone document with the connected phone. Synchronizing two phone documents Contacts with phone document: This option synchronizes the current phone document with the selected phone document. See “Synchronizing contacts diagram” on page 19 for a graphical representation of synchronizing. Synchronizing a phone document to a connected phone To synchronize a phone document with a connected phone, the phone document and the connected phone must match each other. (A match is when the phone’s and document’s model number, ESN, and phone number match.) If the Sync icons on the Coolbar are active (not grayed-out), the connected phone matches the phone document and synchronizing is possible. Active Sync icons If the sync icons are not active, use the Open Phone window (see page 15 for information on the Open Phone window) to open the matching phone document. Sync Contacts with phone 1. Select a phone document. You may already have one open. If not, see “Working with multiple phones” on page 15. 2. Click the Sync Contacts with phone icon on the Coolbar or select Sync > Contacts with phone. The Sync with phone dialog opens. 18 Connectivity Toolkit User’s Guide Synchronizing Contacts 3. Select the synchronization option you wish. See “Options for synchronizing a phone document to a connected phone” in the next section for more information. 4. Click OK. The contact information is synchronized to the phone. Options for synchronizing a phone document to a connected phone These options tell the Connectivity Toolkit what to do if duplicate data appears while synchronizing. n Overwrite phone – Information goes from the phone document to the connected phone. Contacts in the connected phone are overwritten. n Overwrite phone document – Information goes from the phone document to the connected phone. Contacts in the phone document are overwritten. n Merge phone document and phone – (default setting) Contacts from the phone document and the connected phone merge together. No information is overwritten. If you select the merge option, the following options become available. – And overwrite phone – Merges information between phone documents and connected phones and overwrites the connected phone. – And overwrite phone document – Merges information between phone documents and connected phones and overwrites the phone document. – And overwrite both – (default setting) Merges information between phone documents and connected phones, and overwrites both. For more information see “Sync Tab Preferences” on page 11. Synchronizing contacts diagram This diagram describes the concept of synchronizing contacts between phones graphically. Phone 1 (P1 below) can only be synchronized with Document 1 (D1). Document 1, however, may be synchronized with Document 2 (D2). Phone 2 (P2) can then be synchronized with Phone 1 (P1) by synchronizing Document 1 and Document 2. You cannot synchronize directly between phones, nor directly between Document 1 and Phone 2 or Phone 1 and Document 2. You must use phone documents to synchronize between phones. Connectivity Toolkit User’s Guide 19 Synchronizing Contacts So in order to place the contacts of Phone 1 into Phone 2, follow these steps: 1. Create Document 1. Perform “Sync Contacts with phone” on page 18 with Phone 1. 2. Create Document 2. Perform “Sync Contacts with phone” on page 18 with Phone 2. Leave Phone 2 connected. 3. Synchronize Document 1’s contacts into Document 2’s contacts by performing “Syncing two phone documents” on page 20. 4. Perform another “Sync Contacts with phone” on page 18 with Phone 2. The contents of Phone 1 are now in Phone 2. By repeating these steps with other phones, it is possible to place one set of contacts in multiple phones (see “Working with multiple phones” on page 15). Syncing two phone documents This section explains how to synchronize one phone document to another phone document. 1. Select a phone document. You may already have one open. If not, see “Working with multiple phones” on page 15. 2. Select Sync > Contacts with Document... The Sync with phone document dialog opens. 3. Use the drop-down list to select the target phone document. 4. Select the synchronization option you want. See “Options for synchronizing two phone documents,” in the next section. 5. Click OK. The contacts are sent to the target phone document. Options for synchronizing two phone documents The synchronization options in the Sync to phone document dialog offer various ways to synchronize one phone document to another. The options tell the Connectivity Toolkit what to do if a conflict occurs while synchronizing. n Overwrite selected document – Information goes from the current phone document to the selected phone. Contacts in the selected phone document are overwritten. n Overwrite this document – Information goes from the current phone document to the selected phone. Contacts in the current phone document are overwritten. n Merge both documents – (default setting) Contacts from the current phone document and the select phone document merge together. No information is overwritten. 20 Connectivity Toolkit User’s Guide Synchronizing Contacts If you select the merge option, the following options become available. – And overwrite selected document – Merges both phone documents and overwrites the selected phone document. – And overwrite current document – Merges both phone documents and overwrites the current phone document. – And overwrite both documents – (default setting) Merges both phone documents and overwrites both phone documents. For more information see “Sync Tab Preferences” on page 11. Connectivity Toolkit User’s Guide 21 Importing Data Importing Data The Connectivity Toolkit allows you to import contact lists and calendar information from your computer or laptop into your Kyocera Wireless phone. Importing contact information The Import Contacts... menu allows you to import contact information from other applications if the information is saved as a CSV file. CSV files are comma- or tab-separated fields of information and can be created in most text editors. To import contacts, follow the steps below. 1. Select Tools > Import Contacts… The Import Contact dialog opens. 2. Check the The fields are enclosed within quotes box if the information you are importing uses quotes. n Some applications use quote marks to indicate when a field begins and ends. 3. Select Comma or Tab from the drop-down list to indicate how the information is separated. Each field in a CSV file is separated by commas or tabs. The comma or tab tells the importer where a field of information begins and ends. 4. Use the data field drop-down lists to select where the imported information should go in the Contact Manager. The first data field represents the first field of information in your CSV file; the second data field represents the second field; and so on. n Use the drop-down lists in each field to tell the importer where the information should go. For example, if Last Name is selected for the first data field, that information will go in the Name field in the Contact window when imported. If Home Phone is selected in the first field, the information would be imported to the Home Phone field. n To skip a field, select Don’t Care. n To add additional fields, change the last field from End to the category you want. This opens a new field. You may have up to 15 fields. As you add and remove fields, you will notice that the Import Contacts dialog adds and removes drop-down fields as you need. You can remove several fields at once by selecting End from one of your earlier selected fields. 5. Click OK. The CSV File dialog opens. 6. Select the CSV file you want to import and click Open. The information is imported into the contact list. 22 Connectivity Toolkit User’s Guide Importing Data Importing calendar information The Import Calendar... menu allows you to import scheduler information to your QCP 3035 phone from your calendar or scheduling program. The Connectivity Kit supports files exported from n Meeting Makerâ by On Technologyâ and n Outlookâ 97, 98, and 2000 by Microsoftâ Files must be exported as .sdf files (simple delimited) or .csv files (comma or space delimited) in order to be imported into your phone. Follow these steps to import calendar information into your phone. 1. Export your calendar from your scheduling program. – For Meeting Maker, this means use the CasioLink™ format (as an .sdf file) – For Outlook, this means use the .csv format Consult your scheduling program’s user’s guide or help files if you need help doing this. 2. Select Tools > Import Calendar... 3. The Import Calendar dialog appears. Select the type of calendar information you wish to import (Meeting Maker, Outlook 98, Outlook 2000). 4. Click Next. Another dialog appears asking you to open the .csv or .sdf file. 5. Select Open File. A standard Windows file dialog opens. Navigate to the file you wish to import and press Open. 6. The file is selected and you return to the Import Calendar dialog. To accept your choice and continue, press Finish. 7. That’s it! Your schedule is now in your phone, ready for use. You may press Back at any time to move back one dialog or Cancel to stop importing and return to the Connectivity Toolkit. Note: Your phone must have digital service in order to display your schedule. Connectivity Toolkit User’s Guide 23 Phone Monitor Phone Monitor The Phone Monitor shows your phone’s display on your computer screen and lets you control phone functions using your computer’s keyboard. Change settings, edit contacts, get messages, dial numbers, even play games – all from your desktop or laptop computer. Phone Monitor keymap A picture with the QCP 2027, 2035, 2035a, or 3035 phone appears on the right side of the Phone Monitor window showing the keyboard keys that control the phone’s functions. You may also control the phone’s functions using the keys on the phone itself. Phone Monitor display The Phone Monitor display is on the left side of the Phone Monitor window. It shows the current screen of the connected phone. n If no phone is connected, the message “No Phone” is displayed. n If an unsupported phone is connected, the message “Unsupported” appears. Using Phone Monitor 1. Connect a QCP 2027, 2035, 2035a, or 3035 phone to the Connectivity Toolkit. If your phone is already connected, go to step 3. 2. Click the I wish to work with the new phone... option in the Detected Phone dialog. 3. Click the Phone Monitor application icon to open Phone Monitor. 4. The display of the connected phone appears in the Phone Monitor window. 24 Connectivity Toolkit User’s Guide Phone Monitor 5. Use the keys on the computer keyboard shown in the phone illustration to control the phone’s functions. You may also use the phone keys to control phone functions. Adjusting Phone Monitor refresh rate The Phone Monitor refresh rate may be adjusted to fit your needs: 1. Select View > Monitor Refresh Rate… 2. Select the refresh rate you want. Adjusting Phone Monitor window size The Phone Monitor display size can be adjusted to fit your needs: 1. Select View > Monitor Size… 2. Choose the view you want. The Phone Monitor window opens to that size. Connectivity Toolkit User’s Guide 25 Ringer Downloader Ringer Downloader The Ringer Downloader application allows the transfer of user-defined ringers into your QCP 3035 series phone. Ringer files, a cool way to customize your Kyocera Wireless Corp. phone, are available from our web site: http://www.kyocera-wireless.com/support/how_to/qcp3035_ringer.htm. Click the application icon , to open the Ringer Downloader, shown below. The Ringers window The Contact window has two panes. The left pane shows the ringers list. The right pane displays the details for a selected ringer. The right column of the left pane is left blank on purpose. Downloading ringers To download ringers into your phone: 1. Select a phone document. You may already have one open. If not, see “Working with multiple phones” on page 15. 2. Click the Import ringers button in the Coolbar or select File > Import ringers.... 3. A standard Open File dialog appears. Find the directory that contains the ringer files you wish to download into your phone. – Ringer files are of the .kws type and must be obtained from the website listed above. 4. Select the file(s) you wish and click OK. – A maximum of 15 user-defined ringers are allowed. 5. Click the Sync Ringers button in the Coolbar or select Sync > Ringers with Phone... The Sync with Phone dialog appears. Follow the same procedure as synchronizing contacts with your phone (see “Sync Contacts with phone” on page 18). 6. That’s it! The ringers are now in your phone, ready for use. Your new ringers are now on the ringers list on the left pane of the Ringers application window. 26 Connectivity Toolkit User’s Guide AT Command Reference AT Command Reference The modem functions in the phone are controlled using the same industry standard AT commands that are used to control landline modems. A knowledge of these commands is not required by most users of the phone, but they are provided here for reference. The parameters set by the various AT commands in this appendix are remembered by the phone, and are transmitted to the modem at the carrier's site each time you make a call. In this way, your settings continue to be used until you power down the phone. The settings are lost on power-down. It also gives you automatic support of all AT commands that are unknown to the phone but are supported by your cellular carrier. Since the carrier may charge you for the air time used for this connection, the phone’s autoconnect ability is disabled by default. (Use the AT+CXT command to change this behavior.) The phone has two operational states: n Command state n Online state Initially, it is in the Command state where the phone accepts the industry-standard AT commands. When instructed to dial out or answer a data call, the phone is in the online state. Modes of Operation Asynchronous mode - used to transfer information between two computers. Facsimile (fax) mode - used to transfer information between two Group 3 fax machines with digital interfaces (or computer applications that can emulate these machines). Speeds The serial port of the phone defaults to 19200 bps at power-up. The laptop serial port must therefore be configured at 19200 baud. The band rate can be changed via the AT+IPR command, but it will return to 19200 after a power cycle. Command Line Syntax A command line consists of the Attention code, followed by one or more commands, followed by the end of line code. The Attention code is the character pair "AT" or "at." By default, the end of line character is the ASCII CR character (decimal 13), unless it is changed by the S3 command (see the S-Registers Table). Spaces are ignored but may be included between commands, if desired. The basic and S-register commands may follow each other on the command line without any separating delimiters. The extended format commands (those beginning with a "+" character) must be terminated by a ";" if they are followed by another command on the same line. A";" is not required after the last command on the line. Commands may be edited by using the backspace character. The backspace deletes the last character in the command line. The backspace will not delete the AT at the beginning of the line. The A/ command repeats the last command line received by the modem. The A/ is used in place of the AT and is not followed by a carriage return. Connectivity Toolkit User’s Guide 27 AT Command Reference Basic Sets of Commands This section lists some basic commands for you to use with your phone. Basic AT Commands Command Description ATDT5553232 connects to the number 555-3232. There will be a delay of up to 20 seconds before the phone actually connects. Successful connection is identified by a connect message on the computer. Your cellular carrier may support the *3282 prefix for modem pools. If they do, ask them how to use it in order to receive better AMPS data performance. ATH hangs up the phone. There will be a delay before this happens. ATSO=3 sets auto answer 15 seconds after first ring. AT+CXT sets whether the phone will originate a call upon reception of an unknown AT command. AT+CXT=O disables the unknown AT command origination. Types of Commands There are nine types of commands: n Basic AT parameters n S-registers n Basic Action commands n Extended Configuration commands n Fax parameters n Fax Action commands n Cellular CDMA commands n Cellular AT commands n Cellular Identification commands Result Codes When in the command mode, eight possible result codes may be returned. The digit code is returned when the verbose mode is OFF; the word code is returned when the verbose mode is ON. See the 'V' command in the Basic AT Parameters Table. Extended result codes may also be returned. Extended result codes are listed in the following table. Result Codes Table 28 Digit Verbose Description 0 OK Command executed without errors. 1 CONNECT Connected to remote modem 2 RING Incoming Call. 3 NO CARRIER Carrier from remote modem lost or never present. Connectivity Toolkit User’s Guide AT Command Reference Result Codes Table Digit Verbose Description 4 ERROR Error in the command line. 6 NO DIALTONE No dial tone detected within time out period. 7 BUSY Busy signal detected. 8 NOANSWER Five seconds of silence not detected after ring back when @ dial modifier is used. Basic AT Parameters These commands control the basic configuration of the modem. The parameters can only be read back by the &V command when in command state. The following table shows the command format. Basic AT Parameters Table Parameter Description E0 Do not echo commands in command state or online command state. E1 Echo commands in command state or online command state. L0 Low speaker volume. L1 Low speaker volume. L2 Med speaker volume. L3 High speaker volume. M0 Speaker off. M1 Speaker on until carrier reported (support of this feature is optional). M2 Speaker on (support of this feature is optional). Q0 Return result codes. Q1 Do not return result codes. V0 Display result codes as numbers. V1 Display result codes as words. X1 Enable additional result code CONNECT <rate>. Disable dial tone and busy detection.1 X2 Enable additional result codes CONNECT <rate> and NO DIALTONE. Disable busy detection. Enable dial tone detection.1 X3 Enable additional result codes CONNECT <rate> and BUSY. Enable busy detection. Disable dial tone detection.1 Connectivity Toolkit User’s Guide 29 AT Command Reference Basic AT Parameters Table Parameter Description X4 Enable additional result codes CONNECT <rate>, BUSY and NO DIALTONE. Enable busy and dial tone detection.1 Z0 Reset to default configuration. &C0 Circuit 109 (CF) always ON. &C1 Circuit 109 (CF) ON in accordance with the specified service. &C2 Circuit 109 (CF) always on except wink on channel disconnect &D0 Ignore circuit 108/2 (CD). &D1 Enter online command state following ON-to-OFF transition of circuit 108/2. &D2 Enter command state following On to Off transition of circuit 108/2. T Select tone dialing. P Select pulse dialing. &F0 Effect is implementation dependent. &FO Set to default configuration &V Dump configuration parameters * Factory Default Settings S-Registers The value of an S-register may be set by using the syntax, Sn=xxx where n is the register number and xxx is a decimal value. For instance, to set the register SO to 3, the command SO=3 would be used. r1b read register SO, the command SO? is used. The following table describes the S-registers. S-Registers Table 30 Register Value Description S0 0 [1 to 255] Disable automatic answering. [Enable automatic answering after (Value - 1) ? 6 seconds.] S3 13 Carriage Return character. S4 10 Line Feed character. S5 8 Backspace character. Connectivity Toolkit User’s Guide AT Command Reference S-Registers Table Register Value Description S6 2 to 10 2 Pause before blind dialing. S7 1 to 255 [50] Number of seconds to establish end-to-end data connection. S8 0 to 255 2 Number of seconds to pause when “,” is encountered in dial string. [S9] 0 to 255 6 Carrier detect threshold in increments of 0.1 seconds. S10 1 to 254 [14] Number of tenths of a second from carrier loss to disconnect. [255] [Disable carrier detect.] 50-255 95 DTMF tone duration and spacing in milliseconds. [S11] Basic Action Commands The following table describes the Basic Action commands. Basic Action Commands Table Command Description A Go off hook. Answer any incoming call D<dial string> Dial. The dial string may contain the following characters: Digits 0 to 9, *, #, A, B, C, and D. The dial string may contain the following dial modifiers: Connectivity Toolkit User’s Guide T Tone dialing P Pulse dialing , Pause during dialing W Wait for dial tone @ Wait for quiet answer ! Hook flash $ Wait for billing tone (for credit-card calls) 31 AT Command Reference Basic Action Commands Table Command Description ; After dialing, the phone remains in command state HO Disconnect and return to command state. 00 Return to online data state from Extended Commands The extended commands use the extended syntax. To set a value using an extended command, use the WRITE command: +CMD=xxx where CMD is the command, and xxx is the value. Some extended commands take more than one value. For example, the WRITE command for two values becomes +CMD=xxx,yyy Some extended commands take character strings as values, instead of numbers. In that case, the syntax is +CMD="character string" Note that while spaces are ignored everywhere else, spaces are significant inside the quotation marks. To read back a value, use the READ command: +CMD? To determine if a particular command is supported, along with the range of values it supports, use the TEST command: +CMD=? An extended command must be terminated with a semicolon if another command follows it on a single command line. The following table describes the extended AT configuration commands. Extended AT Configuration Commands Table 32 Command Description +DR Data Compression Reporting. This extended-format numeric parameter controls whether or not the extended-format “+DR:” intermediate result code is transmitted from the IWF over the Um interface. +DS Data Compression. This extended-format compound parameter controls the V.42bis data compression function on the PSTN link if provided in the IWF. Connectivity Toolkit User’s Guide AT Command Reference Extended AT Configuration Commands Table Command Description +EB Break Handling in Error Control Operation. This extended-format compound parameter is used to control the manner of V.42 operation on the PSTN link (if present in the IWF). +EFCS This extended-format numeric parameter controls the use of the 32-bit frame check sequence option in V.42 on the PSTN link (if present in the IWF). +ER Error Control Reporting. This extended-format numeric parameter controls whether or not the extended-format “+ER:” intermediate result code is transmitted from the IWF over the Um interface. +ES Error Control Selection. This extended-format compound parameter is used to control the manner of operation of the V.42 protocol on the PSTN link (if present in the IWF). +ESR This extended-format numeric parameter controls the use of the selective repeat (SREJ) option in V.42 on the PSTN link (if present in the IWF). +ETBM This extended-format compound parameter controls the handling of data remaining in IWF buffers upon service termination. +GCAP This extended-format command causes the MT2 to transmit one or more lines of information text in a specific format. The content is a list of additional capabilities command +<name>s, which is intended to permit the user of the MT2 to identify the minimum capabilities of the MT2. An MT2 conforming to this standard shall include the following items, as a minimum, in the result code for the +GCAP command +CIS707, +MS, +ES, +DS, +FCLASS +GMI This command causes the MT2 to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the MT2 to identify the manufacturer. Typically, the text will consist of a single line containing the name of the manufacturer, but manufacturers may choose to provide more information if desired (e.g., address, telephone number for customer service, etc.) +GMM This command causes the MT2 to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the MT2 to identify the specific model of the device. Typically, the text will consist of a single line containing the name of the product, but manufacturers may choose to provide any information desired. +GMR This command causes the MT2 to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the MT2 to identify the version, revision level or date, or other pertinent information of the device. Typically, the text will consist of a single line containing the version of the product, but manufacturers may choose to provide any information desired. Connectivity Toolkit User’s Guide 33 AT Command Reference Extended AT Configuration Commands Table 34 Command Description +GOI This command causes the MT2 to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the MT2 to identify the device, based on the ISO system for registering unique object identifiers. Typically, the text will consist of a single line containing numeric strings delimited by period characters. +GSN This command causes the MT2 to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the MT2 to identify the individual device. Typically, the text will consist of a single line containing a manufacturer determined alpha-numeric string, but manufacturers may choose to provide any information desired. +ICF TE2-MT2 Character Framing. This extended-format compound parameter is used to determine the local serial port start-stop (asynchronous) character framing that the MT2 shall use while accepting TE2 commands and while transmitting information text and result codes to the TE2, if this is not automatically determined (see +IPR). +IFC TE2-MT2 Local Flow Control. This extended-format compound parameter is used to control the operation of local flow control between the TE2 and MT2 [1]. +ILRR TE2-MT2 Local Rate Reporting. This extended-format numeric parameter controls whether or not the extended-format +ILRR:<rate> information text is transmitted from the MT2 to the TE2. +IPR Fixed Rm Rate. This numeric extended-format parameter specifies the data rate at which the MT2 will accept commands, in addition to 1200 bit/s or 9600 bit/s (as required in EIA/TIA-602). It may be used to select operation at rates at which the MT2 is not capable of automatically detecting the data rate being used by the TE2. +MA Modulation Automode Control. This extended-format compound parameter is a list of modulations that the base station may use to connect with the remote DCE in Automode operation, for answering or originating data calls, as additional alternatives to the modulation specified in the +MS command. +MR Modulation Reporting Control. This extended-format numeric parameter controls whether or not the extended-format +MCR:<carrier> and +MRR:<rate> intermediate result codes are transmitted from the IWF to the mobile station. +MS Modulation Selection. This extended-format compound parameter is used to control the manner of operation of the modulation capabilities in the IWF. +MV18R V.18 Reporting Control. This extended-format numeric parameter controls whether or not the extended-format “+MV18R:” result code is transmitted from the IWF to the mobile station. Connectivity Toolkit User’s Guide AT Command Reference Extended AT Configuration Commands Table Command Description +MV18S V.18 Selection. This extended-format compound parameter is used to control the manner of operation of the V.18 capabilities (if present in the IWF). *Factory Default Settings Fax Parameters The Fax parameters follow the same syntax rules as the extended commands, except that the numeric values are in hexadecimal, instead of decimal. The following table describes the Fax parameters. These commands are used between Fax applications and the modem and are listed for reference only. Fax Parameters Table Command Description +FAA Adaptive-answer parameter. See +FCLASS. +FAP Addressing and Polling capabilities parameter +FBO Phase-C data-bit-order parameter +FBS Buffer size. Read-only parameter. +FBU HDLC-frame-reporting parameter +FCC DCE-capabilities parameters VC - Vertical-resolution subparameter [BR] - Bit-rate subparameter • 2400 bits/s • 4800 bits/s • 7200 bits/s • 9600 bits/s WD - Page-width subparameter [LN] - Page-length subparameter [DF] - Data-compression-format subparameter [EC] - Error-correction subparameter BF - Binary-file-transfer subparameter ST - Scan-time-per-line subparameter [+FCLASS] Service-class selection parameter • Class-0 • [Class-1 support unavailable] • Class-2.0 fax service (EIA/TIA-592) +FCQ Copy-quality-checking parameter [+FCR] Capability-to-receive parameter Connectivity Toolkit User’s Guide 35 AT Command Reference Fax Parameters Table 36 Command Description +FCS Current-session results parameters +FCT DTE Phase-C timeout parameter +FEA Phase-C received EOL-alignment parameter +FFC Format-conversion parameter +FHS Call-termination-status parameter +FIE Procedure-interrupt-enable parameter +FIS Current-session negotiation parameters [+FLI] Local-ID-string parameter (TSI or CSI) +FLO Flow-control-select parameter +FLP Indicate-document-to-poll parameter +FMI Request DCE manufacturer identification +FMM Request DCE model +FMR Request DCE revision [+FMS] Minimum-Phase-C-speed parameter +FNR Negotiation-message-reporting control parameters +FNS Nonstandard-frame FIF parameter +FPA Selective Polling Address Parameter [+FPI] Local-polling-ID-string parameter +FPR Serial-port-rate-control parameter [+FPS] Page-status parameter +FPW Password parameter (Sending or Polling) [+FRQ] Receive-quality-threshold parameters +FRY ECM-retry-value parameter +FSA Subaddress Parameter [+FSP] Request-to-poll parameter Connectivity Toolkit User’s Guide AT Command Reference Fax Action Commands These commands do not have arguments. The following table describes the Fax Action commands. Fax Action Commands Table Command Description +FDR Receive Phase-C data. +FDT Transmit Phase-C data. +FIP Initialize facsimile parameters. +FKS Terminate session. Cellular CDMA Commands The cellular CDMA commands use the same syntax as the other extended commands. Numeric values are decimal. The following table describes the Cellular CDMA commands. CDMA AT Parameter Commands Table Command Description +CXT=<value> Cellular Extension. 0 Do not pass unrecognized commands to the IWF. 1 When detecting an unrecognized AT command, open transport layer connection and pass unrecognized command to the IWF. +CFG=“<string>” Configuration String. The string (up to and including the termination character) will be stored by the MT2 and sent to the base station prior to dialing. Each transmission of an AT+CFG command from the TE2 replaces the contents of the previous string. The string may be up to 248 characters. +CAD? Query Analog or Digital Service. Returns: 0 if no service is available 1 if CDMA Digital service available 2 if TDMA Digital service available 3 if Analog service is available (values 4-255 reserved) +CDR Um Interface Data Compression Reporting. This extended-format numeric parameter controls whether or not the extended-format “+CDR:” intermediate result code is transmitted by the MT2. The result code is the same as for the TIA/EIA/IS-131 +DR: result code. Connectivity Toolkit User’s Guide 37 AT Command Reference CDMA AT Parameter Commands Table Command Description +CDS Um Interface Data Compression. This extended-format compound parameter controls the V.42bis data compression function on the Um interface. The command format is the same as for the TIA/EIA/IS-131 +DS command. +CRM=<value> Set Rm interface protocol. 0 Asynchronous Data or Fax 1 Packet data service, Relay Layer Rm interface 2 Packet data service, Network Layer Rm interface, PPP 3 Packet data service, Network Layer Rm interface, SLIP 4 STU-III Service 5-127 Reserved for future use 128-255 Reserved for manufacturer specific use Note: The default value for the +CRM parameter shall be 0 if this value is supported by the MT2. If 0 is not supported, the default +CRM value shall be manufacturer specific. +CBC? Battery Charge. Read-only. Returns <BCS>,<BCL> BCS: 0 MT2 powered by battery, BCL = status 1 MT2 connected to external power 2 Battery status not available 3 Recognized power fault. Calls inhibited. BCL: 0-100 Remaining battery capacity is 0-100%. +CDS 38 Um Interface Data Compression. This extended-format compound parameter controls the V.42bis data compression function on the Um interface. The command format is the same as for the TIA/EIA/IS-131 +DS command. Connectivity Toolkit User’s Guide AT Command Reference CDMA AT Parameter Commands Table Command Description +CRM=<value> Set Rm interface protocol. 0 Asynchronous Data or Fax 1 Packet data service, Relay Layer Rm interface 2 Packet data service, Network Layer Rm interface, PPP 3 Packet data service, Network Layer Rm interface, SLIP 4 STU-III Service 5-127 Reserved for future use 128-255 Reserved for manufacturer specific use Note: The default value for the +CRM parameter shall be 0 if this value is supported by the MT2. If 0 is not supported, the default +CRM value shall be manufacturer specific. +CBC? Battery Charge. Read-only. Returns <BCS>,<BCL> BCS: 0 MT2 powered by battery, BCL = status 1 MT2 connected to external power 2 Battery status not available 3 Recognized power fault. Calls inhibited. BCL: 0-100 Remaining battery capacity is 0-100%. +CQD=<value> Command State Inactivity Timer (see 3.9.1.3). 0 Ignored 1-255 Release call after 5x<value> seconds have elapsed without activity. The default <value> shall be 10, corresponding to 50 seconds. +CRC=<value> Cellular Result Codes (see Table 7.4.2-1). 0 Disable Cellular Result Codes 1 Enable Cellular Result Codes +CMIP? Mobile Station IP Address. Read-only. Returns the mobile station’s temporary IP address. +CBIP? Base Station IP Address. Read-only. Returns the base station’s IP address. Connectivity Toolkit User’s Guide 39 AT Command Reference CDMA AT Parameter Commands Table Command Description +CSS? Serving System. Read-only. Returns <AB>,<SID> AB: A The mobile station is registered with an A-band system. B The mobile station is registered with a B-band system. Z The mobile station is not registered. SID: 0-16383 The mobile station is registered with the system indicated. 99999 The mobile station is not registered. +CSQ? Query Received Signal Quality. Returns the Signal Quality Measure <SQM> and the Frame Error Rate <FER> as follows: Signal Quality Measure <SQM> 0-31 Signal Quality Measurement (see Note 1). 99 SQM is not known or is not detectable. All other values are reserved. Frame Error Rate <FER> 0<0.01% 10.01% to less than 0.1% 20.1% to less than 0.5% 30.5% to less than 1.0% 41.0% to less than 2.0% 52.0% to less than 4.0% 64.0% to less than 8.0% 7?8.0% 99 <FER> is not known or is not detectable. All other values are reserved. +CFC=<value> Um Interface Fax Compression. 0 No compression. 1 V.42bis compression with parameters as set by the +CDS command. 2 Modified Read compression. Note 1. The exact meaning of the Signal Quality Measure shall be manufacturer defined. The lowest quality reported by SQM shall be defined as value 00. The highest quality reported by SQM shall be defined as value 31. *Factory Default Settings 40 Connectivity Toolkit User’s Guide AT Command Reference Cellular AT Commands These commands allow the data terminal to be used as an automatic dialer for voice calls. The format of these commands is shown in the following table. Cellular AT Command Extensions in Support of Voice Services Table Command Description +CHV<value> Hangup Voice 0 Hangup voice call 1-255 Reserved +CDV<dial string> Dial command for voice calls. The format of <dial string> is identical to that for the ATD command. This command does not cause the MT2 to change to the online state. +CGCAP This extended-format command causes the IWF to transmit one or more lines of information text in a specific format. The content is a list of additional capabilities command +<name>s, which is intended to permit the user of the IWF to identify the minimum capabilities of the IWF. IWFs conforming to this standard shall include the following items, as a minimum, in the result code for the +CGCAP command: +CIS707, +MS, +ES, +DS, +FCLASS +CGMI This command causes the IWF to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the IWF to identify the manufacturer. Typically, the text will consist of a single line containing the name of the manufacturer, but manufacturers may choose to provide more information if desired (e.g., address, telephone number for customer service, etc.) +CGMM This command causes the IWF to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the IWF to identify the specific model of the device. Typically, the text will consist of a single line containing the name of the product, but manufacturers may choose to provide any information desired. +CGMR This command causes the IWF to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the IWF to identify the version, revision level or date, or other pertinent information of the device. Typically, the text will consist of a single line containing the version of the product, but manufacturers may choose to provide any information desired. Connectivity Toolkit User’s Guide 41 AT Command Reference Cellular AT Command Extensions in Support of Voice Services Table Command Description +CGOI This command causes the IWF to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the IWF to identify the device, based on the ISO system for registering unique object identifiers. Typically, the text will consist of a single line containing numeric strings delimited by period characters. +CGSN This command causes the IWF to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the IWF to identify the individual device. Typically, the text will consist of a single line containing a manufacturer determined alpha-numeric string, but manufacturers may choose to provide any information desired. Cellular Identification AT Command Extensions Table Command Description +CGCAP This extended-format command causes the IWF to transmit one or more lines of information text in a specific format. The content is a list of additional capabilities command +<name>s, which is intended to permit the user of the IWF to identify the minimum capabilities of the IWF. IWFs conforming to this standard shall include the following items, as a minimum, in the result code for the +CGCAP command: +CIS707, +MS, +ES, +DS, +FCLASS Cellular AT Commands for Packet Data Services Table 42 Command Description +CTA=<value> Set/Read/Test Um packet data inactivity timer. 0 Traffic Channel not released during inactivity periods. 1-255 Release the Traffic Channel after <value> 1-second intervals have elapsed since last sending or receiving RLP data frames on the Um interface. 20 (default) +CPTC=<value> Controls Traffic Channel state without affecting the IWF Link Layer connection. 0 Release Traffic Channel 1 Originate Traffic Channel Connectivity Toolkit User’s Guide AT Command Reference Cellular Result Codes Table Result Code Description +CERROR: INIT FAILED <failed command> Initialization string failed +CPROG: ANSWER Indicates remote DCE has answered. +CPROG: BONGTONE Billing Tone was detected. +CPROG: DIALING <number> Indicates PSTN Dialing. +CPROG: DIALTONE Dalton was detected. +CPROG: QUIET ANSWER Indicates Quiet Answer. +CPROG: RINGING Indicates PSTN Ringing. +CPROG: VOICE Voice detected on the PSTN connection. RING <service option> Specifies active service option. The <service option> shall be “ASYNC”, “FAX” or “STU-III.” Connectivity Toolkit User’s Guide 43 Glossary Glossary call forwarding. A feature that permits you to reroute incoming calls to a different telephone number, either all the time or only when your phone number is busy or doesn’t answer. call history. A list of the last 199 calls you have sent or received. call waiting. When you’re currently engaged in a call, a signal notifying you that another call has arrived. carrier features. Options available from your telephone service provider. Since these options vary, you must contact your service provider for detailed information. command. An instruction that causes a device (such as a phone or a computer) to perform an action. data transmission. The technology of transmitting and receiving information over communication channels. dialog box. A temporary box or window of information that prompts you to enter and/or select information that is necessary for a task to continue. DNS. Domain Name System, a mechanism on the Internet for translating the domain names of host computers (such as server.company.com) into IP addresses. DTMF. Dual Tone Multi-Frequency, a method of using tones to communicate commands and responses to and from a master controlling unit. These are the tones you hear when you dial a telephone. e-mail. Electronic mail, a store-and-forward service for text and graphical messages from one computer to another. The information is stored for you until you log into the system to retrieve the messages. field. A location where you enter data. A field is often displayed as a line where you can write information. handset. Another name for any ordinary telephone; may refer to the part of the telephone containing the mouthpiece and receiver. hard reset. A reset of your phone that erases all data. IAP. Internet Access Provider, a service that provides companies and individuals with a link to the Internet. idle timeout. The amount of time the phone waits before dropping a connection with your ISP or dial-in server after a network application closes. Internet. The set of interconnected networks that share the same network address scheme and use the TCP/IP protocol. IP Address. Internet Protocol Address, the address that identifies the network to which each computer on a TCP/IP network is attached as well as the computer’s unique identification. ISP. Internet Service Provider, a vendor who provides direct access to the Internet. point-to-point. A term used to describe a data channel which connects two—and only two—computers. prefix. The number you dial before the telephone number to reach an outside line. protocol. A set of rules followed by two computers when they communicate with one another. roaming. Using telephone services outside of the area covered by your home service provider script. A file used by some communications programs to automate logging onto communication services such as e-mail 44 Connectivity Toolkit User’s Guide Glossary scroll bar. A bar at the right border of a window whose contents are not completely visible. Each scroll bar contains two scroll arrows and a scroll box that you can tap to move through the contents of the window. serial port. An input/output port used to connect serial devices, such as a mouse, external modem, or wireless phone to a computer TCP/IP. Transmission Control Protocol/Internet Protocol, the standard rules used for data transmission over the Internet Connectivity Toolkit User’s Guide 45 Glossary 46 Connectivity Toolkit User’s Guide Index A area codes adding 16 change 16 removing 17 C cable 9-pin connector 4 to your computer 4 to your phone 4 call forwarding, definition 44 call waiting, definition 44 COM serial port connect cable 4 command, definition 44 connecting the data cable to your computer 4 to your phone 4 Contact Manager 12 contacts creating 13 details 13 editing 13 list 12 type 12 Coolbar 8 copy see sync D data cable to your computer 4 to your phone 4 Data transmission, definition 44 dialog box, definition 44 DNS, definition 44 DTMF, definition 44 E edit an existing contact 13 e-mail, definition 44 F fax 5 field, definition 44 H handset, definition 44 hard reset, definition 44 help online help 5 I idle timeout, definition 44 Connectivity Toolkit User’s Guide import calendar 23 contatcts 22 Internet, definition 44 IP address 44 IP Address, definition 44 ISP, definition 44 M merge/sync priorities 11 multiple phones managing 6 matching 6 open phone 6 phone documents 6 sync current 6 N new contacts creating 13 editing 13 O online help 5 Open Phone 6 P Phone Detected window 7 point-to-point, definition 44 port 4 Preferences 9 General Tab 9 prefix, definition 44 protocol, definition 44 Q QuickLink QuickLink Fax 5 QuickLink Mobile 5 R requirements 3 Ringer Downloader 26 ringers download 26 import 26 roaming, definition 44 S script, definition 44 scroll bar, definition 45 secret numbers locking 17 unlocking 17 serial port, definition 45 47 sync 19 between phone and document 11, 18 between two documents 11, 18 Sync Current 6 Sync Tab 9, 10 Synchronizing contacts 19 48 T TCP/IP, definition 45 troubleshooting 5 W Where I can find information 5 wireless modem 5 Connectivity Toolkit User’s Guide
