1-866-go-liftow - Liftow Limited

Transcription

1-866-go-liftow - Liftow Limited
More than just lift trucks!
Vol. 1007
Used Forklifts
Training Aids
& Materials
Battery
Safety
Propane
Safety
Fall
Protection
Check out our feature products!
Prevent costly facility damage!
Column
Protectors
See page 36
Increase Operator Maneuverability
Anti-Cinch
Comfort Seat
Belt
See page 30
increase Battery handling safety
Complete Battery
PPE Kit in a Box!
Safety
Accessories
Facility
Protection
Atrium Full
Forklift Enclosure
See page 33
1-866-go-liftow
(1-866-465-4386)
19
23
26
28
29
36
Attachments
41
See page 26
Protect operator from rain & snow
8
Lifting Booms
Work Platforms/
Ladders
Dock
Accessories
45
50
52
New products
Safety Mats
Lift Truck Log
Complete Checklist System
vinyl filament
The most complete Lift Truck
recording system on the market.
Lift Truck Log Includes:
• Daily Check Lists - 624
2-3 years
• Repair Request Forms - 24
only
supply
• Accident Report Forms - 4
$
95
• Near-miss Report Forms - 4
• Lock-out Tag (required if truck unsafe to operate)
• PM Tracking History - 36 Events (know when to service each truck)
49
All in one box that easily attaches to any lift truck!
Lift Truck Log Types
Log Off
Log On
Couterbalance Propane Log Form “A”
Date:
Time Start:
Meter Start:
Item
Time End:
Meter End:
Inspection Required:
Propane
Visual Check
Relief valve pointing up:
Fuel level:
No fuel leaks:
Safety straps secure:
Forklift
Overhead guard:
Tires/wheels:
Tilt cylinders:
Carriage:
Forks and locking pins:
Mast:
Lift cylinder & chains:
Capacity data plate:
Other:
Operator Controls
Engine
Engine oil level:
Radiator fluid level:
Air filter:
Fan belt:
Hydraulic oil:
Battery & connectors:
Seat belt:
Parking brake:
Service brakes:
Lifting & lowering controls:
Tilt controls:
Lights:
Horn & warning devices:
Gauges:
No oil leaks:
Optional - Attachments:
Other:
Pass / Fail
Pass:
:
Operator’s initials:
Price
LOG(CB)-E
Propane Counterbalance
$49.95
LOG(E)-E
Electric Counterbalance
$49.95
LOG(N)-E
Electric Narrow Aisle
(reach & order picker)
$49.95
LOG(P)-E
Electric Pallet Truck
$49.95
Kit includes: Log, Plastic Case,
Lock-out tag, and pull-strap
Operational Check
(See Form “B”) Fail
Description
RLOG-E
Sample Checklist
624 Events per Log
(replacement log books).......
This form remains in Lift Truck Log
SMT108 (3’ x 5’)
Safety Coil Mats offer an excellent way to promote a safe and clean work
environment. The mats are made from a durable vinyl coiled filament
substrate excellent for scraping and trapping mud, snow and debris from
shoe surfaces, while communicating your safety message at the first point
of entrance. These images are made by coloring the actual vinyl in the mat,
not printing. This means the image will last the life of the mat.
Other safety designs:
29
$
95
Prevent use of unsafe equipment.
Lock-out Box
The Equipment Lock-Out box
will lock-out your lift truck
(or other equipment) until repairs
are made. Comes complete with
lock-out tag, straps and lock.
Lock-out Box
$
LOCKBOX-E.................
3995
SMT104 (3’ x 5’)
SMT100 (3’ x 5’)
SMT106 (3’ x 5’)
SMT102 (3’ x 5’)
SMT110 (3’ x 5’)
SMT112 (3’ x 5’)
only
3995
$
Lock-out Applications at the ignition source:
Forklift Battery
Connectors
110-220-550 Volt
AC Plugs
Forklift Propane
Connectors
item
12 Volt DC
Starter Batteries
* Shipping extra unless otherwise stated.
Cylinders
Valves
DESCRIPTION
PRICE
SMT100-C
Hearing Protection Mat
$279.00
SMT102-C
SMT104-C
SMT106-C
SMT108-C
SMT110-C
SMT112-C
Slippery When Wet Mat
Safety Footwear Mat
Safety Glasses Mat
Forklift Traffic Mat
Tri Logo Design Safety Mat
Safety Is Your First Priority Mat
$279.00
$279.00
$279.00
$279.00
$279.00
$279.00
* prices are subject to change without notice.
New products
Tuff-mark Aisle tape
AIsle marking tape (pvc)
2 year warranty
Aisle Marking PVC (vinyl) Tapes are
made from a durable 6 MIL thick
vinyl film with a permanent acrylic
adhesive system that will adhere to
most any clean, dry surface. Vinyl
offers a matte smooth conformable
tape that is great for marking hazards
on floors, walls and equipment.
item
Ultra durable
Low-profile design
DESCRIPTION
Tuff Mark is over 10 times more
abrasion resistant than standard aisle
marking tape, making this a great
product for high traffic areas. Our
low-profile design allows forklifts and
wheeled carts to easily pass over it.
PRICE
Tuff Mark has a ultra-durable thick Lexan® top
layer that offers excellent chemical and abrasion
resistance. This allows the tape to be cleaned,
offering a just like “new” appearance.
PST210-C
PVC Aisle Marking Tape 2” x 108’ Roll - Yellow
$11.00
PST211-C
PVC Aisle Marking Tape 2” x 108’ Roll - Green
$11.00
PST212-C
PVC Aisle Marking Tape 2” x 108’ Roll - Red
$11.00
PST224-C
PVC Aisle Marking Tape 2” x 108’ Roll - Blue
$11.00
PST410-C
PVC Aisle Marking Tape 4” x 108’ Roll - Yellow
$22.00
item
PST411-C
PVC Aisle Marking Tape 4” x 108’ Roll - Green
$22.00
TM1202YB-C
Yellow/Balck Hazard Tuff-Mark Tape 2” x 54’ Roll
$119.00
PST412-C
PVC Aisle Marking Tape 4” x 108’ Roll - Red
$22.00
TM1204YB-C
Yellow/Balck Hazard Tuff-Mark Tape 4” x 54’ Roll
$179.00
PST424-C
PVC Aisle Marking Tape 4” x 108’ Roll - Blue
$22.00
DESCRIPTION
PRICE
Gator grip tape
photoluminescent tape
Gator Grip Traction Tape is our premium brand high traction system to help
ensure an OSHA compliant workplace. Constructed from a thick PVC base
layer impregnated with an aggressive 60- grit aluminum oxide compound.
The backing has an aggressive acrylic adhesive system for longevity that will
form a strong bond to most any clean, dry surface while maintaining a
water-proof bond. Gator Grip is a great choice for both indoor and outdoor
environments with excellent wear resistance, weatherability and water resistance.
Protect your workers during blackouts and evacuations. The Glow-in-the-Dark
Tapes will “GLOW” for up to 6 hours. This product comes with an aggressive
permanent pressure sensitive adhesive that will adhere to most any clean,
dry surface. Tape absorbs any ambient or UV light source, then releases this
stored energy in darkness.
item
DESCRIPTION
PRICE
item
DESCRIPTION
PRICE
SG3102B-C
Black Anit-Slip Gator Tape 2” x 60’ Roll
$49.88
523522P-C
Safety Glow-in-the-Dark Tape 2” x 10 Yd Roll
$55.00
SG3104B-C
Black Anit-Slip Gator Tape 4” x 60’ Roll
$99.52
523524P-C
Safety Glow-in-the-Dark Tape 4” x 10 Yd Roll
$109.00
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
Leading the industry in
productivity, quality
and durability.
the new toyota 8-Series.
The best just got better.
Once again, Toyota innovation and engineering come
together to set a new standard in the lift truck industry.
The 8-Series offers major advancements that enhance
every aspect of lift truck operation.
The result: our most durable lift trucks ever—not to
mention, a safer workplace and more productive lift
Durability
Toyota’s world-renowned production system ensures that every
8-Series lift truck delivers the kind of superior durability you would
expect from the leader in lift truck technology. The truck’s thick,
fully stamped steel side panels and moisture-resistant electrical
connectors are designed to withstand harsh environments.
sYSTEM of aCTIVE stability
No other lift truck brand offers a system like Toyota’s System of
Active Stability™ (SAS). With over 100,000 SAS-equipped Toyota
lift trucks operating in North America—and Toyota’s proven
record of lift truck safety—you can feel confident knowing your
operators are utilizing equipment that sets the industry standard
in safety.
truck operators.
ergonomics
Call us at
1-866-GO-Liftow
(1-866-465-4386)
For more information
visit us online at
www.liftow.com
The more comfortable operators are, the more productive they are.
That’s why you’ll find a host of ergonomic innovations in the 8-Series.
environment
The new 8-Series lift trucks feature an exclusive emissions system
that not only surpasses 2007 Federal EPA emissions standards, but
also meets stringent 2010 emission standards—three years early
[1]. The result is a new line of lift trucks that produce 70 percent less
smog-forming emissions than the 2007 standard.
Toyota Equipment
Innovation and engineering come together to revolutionize the forklift industry.
7FBEU 3-Wheel Electric Cushion/Pneumatic:
Tire 3,000 - 4,000 lb. Capacity
Toyota’s new line of 7FBEU cushion and pneumatic tire
lift trucks feature a standard power packed AC Drive and
all new AC Lift System. These systems produce quick
responses to operating commands and precise power
control resulting in increased efficiency and productivity.
Couple this with Toyota’s revolutionary Active Mast Control
(AMC) and the result is a 3-wheel electric lift truck that
works longer, harder and safer then ever before.
7FB 4-Wheel Electric Pneumatic Tire:
3,000 - 7,000 lb. Capacity
Toyota’s 7FB series electric-powered forklifts incorporate
the very latest in forklift technology, a fusion of Toyota’s
innovative ergonomic and ecological design ideas with
advanced electronic-control technologies. The 7FBs not
only look different from other electric forklifts, they’re also
among the first to harness the advantages of AC Power.
7FBCU 4-Wheel Electric Cushion Tire:
3,000 - 12,000 lb. Capacity
The 7FBCU series forklifts combine state-of-the-art
electronic-control technology, creative engineering,
and breakthrough ergonomic and operator-friendly
designs for the most advanced electric-powered
machines in the business.
Toyota 7FBR Stand-Up Reach Truck: 2,000
- 3,000 lb. Capacity
At the heart of these reach trucks is Toyota’s world-leading
Traction & Brake Control (TBC) System. This system
enables outstanding performance and productivity in tight
spaces and on wet or slippery surfaces while at the same
time ensuring the safety and comfort of the operator.
Toyota 6FBR Sit-Down Reach Truck: 2,000
- 4,000 lb. Capacity
Toyota Electric Reach Trucks are the culmination of
Toyota’s unique blend of advanced technology and
comfort design. We combine over 40 years of industrial
vehicle manufacturing with today’s most advanced
technology. The result is a series of Reach Trucks that
provide true comfort and productivity all in one package.
Toyota 8FGCU Cushion Tire:
3 ,000 - 6,500 lb. Capacity
This model is a fusion of Toyota’s innovative ergonomic and ecological
design ideas with advanced electronic-control technologies.
Toyota 7FGCU Cushion Tire:
8,000 - 15,500 lb. Capacity
Toyota’s 7-Series Cushion Tire lift trucks have forever raised the bar on
lift truck safety, operation and performance. The 8,000 - 15,500 lb capacity
models combine innovative ergonomics and an advanced electronic-control
system for optimum productivity. The key to it all is Toyota’s patented
System of Active Stability (SAS), which monitors over 3,000 lift truck
operations for outstanding safety, comfort and operability.
7FGCU-BCS Cushion Tire Boxcar Special:
8,000 - 12,000 lb. Capacity
Toyota’s 7-Series Boxcar Special models deliver the increased
maneuverability and capacity that is normally found only on a shorter
wheelbase unit. These compact work-horses, available in 8,000
- 12,000 lb capacity models, combine innovative ergonomics, a tight
turning radius and advanced electronic-control systems for optimum
productivity.
Toyota 8FGU/8FDU Pneumatic Tire:
3,000 - 6,500 lb. capacity
Stability and safety form the underpinnings of any Toyota forklift.
The 7-Series puts an exclamation point to these concerns with the
most extensive safety features ever seen on an industrial machine.
Toyota 7FGU/7FDU Pneumatic Tire:
8,000 - 17,500 lb. Capacity
Like all members of the Toyota 7 Series family, these pneumatic tire
forklifts incorporate the very latest in forklift technology, a fusion
of Toyota’s innovative ergonomic and ecological design ideas with
advanced electronic-control technologies.
3FG Pneumatic Tire:
1,200 - 1,500 lb. Capacity
These forklifts may appear small but they offer all the productivity,
reliability and safety of their bigger brothers in the Toyota family.
They’ve been specifically designed to go where others can’t fit, and
to do jobs that would otherwise take many hours of manual labour.
These “Mighty Mite” forklifts are welcome partners anywhere that
needs increased productivity and efficiency in confined spaces.
Introducing the New Toyota Class III 8-Series!
Features include:
• AC drive Motor & Controller System
•improved productivity
Walkie Pallet Truck
• 4,000 and 6,000 lb. capacity
• 24 volts
• 6-inch lift
• Lift limit switch
• Low voltage cutback
• Runaway protection
• Overload protection valve
End-Control Walkie/Rider
• 6,000 and 8,000 lb. capacity
• 24 volts
• 6-inch lift
• Program lets you set
performance characteristics
• Continuous fault protection
• Runaway protection
• Reduced Maintenance
AC drive offers fast response to operating
commands, precise power control, compact
components and provides high levels of
productivity throughout the entire shift.
Center-Control Rider
• 6,000 and 8,000 lb. capacity
• 24 volts
• 6-inch lift
• Program lets you set
performance characteristics
• Continuous fault protection
• Proportional plugging
Tow Tractor
• 10,000 lb. capacity
• 24 volts
• 6-inch lift
• Program lets you set
performance characteristics
• Cool running, vertically
mounted motor
parts
Parts for ALL makes and models!
OEM and After MARKET.
Why Choose Liftow?
We are the largest Toyota forklift
dealer in North America.
Experienced and Qualified Parts Staff.
Quick and accurate parts identification
via electronics parts catalogue.
Overnight emergency air orders
upon request.
Toyota orders processed at two order
points daily.
Parts and attachments available for
all major brands of forklifts and
other material handling equipment.
Wide range of allied products such as
dock boards, rolling ladders, pallet
trucks and four wheel carts.
Mobile tire service - supply and install
tires at customer location.
Order your forklift
parts online!
Visit our Parts section on our website
www.liftow.com
forklift rentals
Need a Forklift Rental?
Competitive rates
Fast delivery to your door
Toyota reliability
1000 plus unit rental fleet
Propane and electric powered units
Trucks for indoor and outdoor applications
All trucks inspected prior to delivery
Delivered right to your front door
CALL TODAY
1-866-GO-LIFTOW
20% Off
Get 20% off your next short term
rental with Liftow.
e restrictions may
Offer applies to any new rental. Som
apply, call for more details.
Offer valid until Jan 1, 2008.
1-866-465-4386
Speak to our representatives
about finding the right truck and
rental plan for your application.
www.liftow.com/rentals
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
USED Forklifts
Used Toyota forklifts
to meet every budget!
Full Line of Quality Toyota Fleet Trucks
Liftow Certified Used Trucks assure quality at an affordable price.
We take special care in ensuring that our trucks are in top condition.
Our factory trained technicians do complete testing and repairs on
all used trucks to make sure that our fleet trucks run like new.
Come visit our showrooms and check out our line of quality and
reliable Toyota forklifts.
How to select a good used lift truck:
• Dealer’s reputation
• Check the mechanical condition
• Check for safety requirements
• Check the serial number
• Check references
Components we inspect and repair:
• Mast assembly
• Powertrain
• Hydraulic system
• Steering column and steer axle
• Brakes and tires
• Overall physical condition
new
Online used forklift database
Visit us at www.liftow.com/used
Search by
Year
Engine Type
Tire Type
Capacity Range
Price Range
Request a Quote Online
Don’t buy just any used Forklift. Buy our used Toyota forklifts:
Originally purchased and maintained by Liftow.
Liftow Certified Used Forklift Program
Full line of TOYOTA quality Fleet Trucks.
•All-Inclusive Lifting Device Inspection
& Emissions certification.
•Complete Inspection & Repair program
on reconditioned units.
•Certified batteries for electric trucks.
•Industry leading comprehensive
warranties.
•Financing and leasing options available.
•All work completed by Toyota factory
trained technicians.
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
Toyota Equipment
Services
Make Liftow your one-stop
As the largest Toyota dealership in the world, we have assembled some of the finest technical staff available in a seamless web of service locations spanning
Ontario, Quebec and the East Coast. Our 14 individual branches with a total of 120 fully trained technicians are at your service 24 hours a day, 365 days a year.
Each location is proud to offer a comprehensive shop facility for those big jobs, and a fleet of service vehicles for on-site repairs and maintenance.
maintenance services
• Repair to all makes and models
• Scheduled maintenance when you need it
• Custom tailored to your operation by customer service reps that will visit your plant or factory
24-Hour Service
Day shift or night shift, our mobile
technicians are on call 24 hours a day.
Detailing &
Painting
Repair scratches, scrapes
and collision damage. Our
professionals can make your
lift trucks look like new.
Total
Refurbishing
Our technicians can teardown, inspect and rebuild
your lift trucks to factory
specifications.
Maintenance & Repairs
All scheduled maintenance and repairs
can be done either on-site or in our fully
equipped shop.
Engine Rebuilds
Electric motors and internal
combustion engines can be
rebuilt and repaired at our
locations.
Mast Overhauls
For service on all makes and
models of trucks. Call Today!
1-866-GO-LIFTOW
10 10
A “sloppy” mast may
become a safety hazard.
Liftow service technicians
know how to keep the mast
in proper working order.
Toyota Equipment
services
service provider!
Safety Inspections
The Ministry of Labour requires that all lift trucks have a lifting device inspection at least once per year.
Ensure that your lift trucks meet or exceed the standard by using Liftow Limited’s factory trained technicians.
Lifting Device Inspections
We have developed an excellent “full vehicle
inspection” report to let you know the exact
condition and repair cost of your equipment.
From hydraulic oil pressure readings to fork
condition, we’ll tell you honestly what needs
to be done.
Emissions Testing
Our technicians can do a carbon monoxide
exhaust analysis and make the necessary
recommendations to ensure that your fleet
meets legal standards.
Mast and Hydraulic Load Testing
We have a range of certified loads for the
testing of masts to lift the truck’s rated
capacity. The correct lift and tilt relief pressures
play a big part in this load test. These would
be set to a manufacturer’s pressures before
carrying out any load test. It is important that
the truck should be able to handle its rated
capacity safely. Never overload a lift truck, it
will upset the truck’s stability.
From electric walkies to 30,000 lb. yard trucks of any make or model,
our service department can take care of all your needs.
•
•
•
•
•
•
•
•
Cartage
Programmed Maintenance
24-hour Emergency Service
Quick Response Times
Major Component Rebuilding
Guaranteed Repair Quotes
Emissions Testing
Tire Service
•
•
•
•
•
•
•
•
Full Vehicle Inspections
Hydraulic Work Shop
Machine Work Shop
Welding & Fabricating
Painting
Battery & Charger Needs
Magnifluxing
Lifting Device Inspections
Our Partners in
Excellence logo
is a visual sign of
our continuous
effort to establish
a collaborative
relationship with
both our suppliers
and customers, to the
mutual benefit of all
concerned. We aim to
assist in the reduction
of operating expenses
by providing
innovative solutions
to material handling
problems, and by
providing the highest
quality products
at a reasonable
cost, backed up by
exemplary service
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
11
Racking Systems
Conveyors
Pick Module Conveyors
Drive-In
Incline and Power Incline Conveyors
Sortation Equipment
Very Narrow Aisle
(VNA)
* Shipping extra unless otherwise stated.
12
* prices are subject to change without notice.
Racking systems
ENSURE YOUR STORAGE SYSTEM
COMPLIES WITH THE CURRENT
APPLICABLE STANDARDS
If your warehouse contains an industrial storage system,
then as an employer and owner, you are obligated to comply
with the equipment maintenance requirements within
the provincial Labour acts and the OHSA.
STORAGE SYSTEM SAFETY
AUDIT TRAINING PROGRAM
Under the OHSA, you must inspect your workplace monthly.
For companies looking to have audits performed internally
by their own personnel, the SafeRack Storage System
Safety Audit Training Program will teach your employees
to perform this critical function.
Attendees, upon successful completion of both
a written and practical test, will be qualified to
produce a clear and concise report regarding the
general condition of their storage systems for their
Joint Health and Safety Committee based on the
current applicable standards.
The SafeRack training program includes a full day of both
classroom and hands-on instruction which together provides
a comprehensive review of:
• Applicable design / installation standards
• Various storage systems and equipment
• Potential hazards in storage systems
• Damage identification and classification
Don’t get your facility shut down because of these. . . .
Let SafeRack teach you how to meet your obligations.
FOR MORE INFORMATION, CONTACT US AT:
Phone: 905.670.7375 E-mail: info@saferack.net
Please visit our website www.saferack.net
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
13
Seeking temporary help?
Call The Experts In Industrial Staffing!
Large selection of qualified
workers available now!
•General Labour
•Forklift Operators (Certified & Experienced)
•Machine Operators
•Skilled Trades
•Picking/Packaging
•Shipping/Receiving
•Warehouse Management
•Customer Service Representative
Specializing in supplying certified, experienced forklift operators and all other warehouse positions!
1-866-LiftTemp (1-866-543-8836)
14
www.lifttemp.com
Untrained operators could cost you Millions!
Providing a safe working environment is not only the right thing to do, it’s also the law.
The law requires certain conditions to be met. Studies show
that most lift truck
accidents are the result
of inadequate operator
training or disregard of
proper safety practices.
Making safety a top priority not only saves lives
but will also reduce
the costs of accidents,
insurance, damaged
equipment and product.
must make a million dollars to pay
for the direct costs of a $10,000
training program, and that the
benefits would far exceed the costs.
Liftow has the on-site
training program you need
to meet any application.
All training courses can
be customized to meet
an individual’s specific
requirements.
Choose
from a wide variety of
courses such as Trainthe-Trainer;
Instructor
Training; Existing Operator Training; New
In addition to these
Operator Training; Fuel
costs, a study done by
Source Training includes
Crane
Forklift
AWp
the Construction Safety
(Propane, Battery, and
Association of Ontario shows accident. An accident with $100,000 Natural Gas Safety Exchange
that companies who have had an in direct costs requires $10 million &
Maintenance)
accident must generate enormous in revenue for the company to WHMIS Training;
sales in order to recover costs recover sufficiently! It is obvious Supervisor Awarearising from the accident. Estimates that minimizing the risk of ness; and Ministry
show that a company operating these types of accidents justifies of Labour Compliat a one per cent profit margin implementing a forklift operator ance
Seminars.
Liftow Training more than just forklifts!
Introducing
New
Basic Certification Training
The Occupational Health and Safety Act
requires employers to establish a Joint
Health and Safety Committee (JHSC) at
workplaces with 20 or more employees.
You are also required, by law, to have at
least two “certified members”: one
representing workers and the other
representing management.
In order to become a certified member you
must successfully complete both
Part 1 and Part 2 Certification Training
All Certification training is in accordance with the criteria set by the WSIB.
Certification Training - Part 1
Upcoming training
SEMINARs
The two day program is design to give a
basic overview of the health and safety
system.
Supervisor Awareness
Transportation of
Dangerous Goods
Fall Arrest
Dock Safety
Certification Training - Part 2
Manufacturing or Office
Train -the -Trainers
Part 2 of this certification provides hazard
specific training within your industry. This
program is design to give participants the
tools to recognize, assess, and control
workplace hazards.
WHMIS
AWP (Aerial Work Platform)
Crane
Call for dates and locations.
Classes fill up quickly, call today to reserve your spot.
call us: 1-800-801-7989
15
Training
Liftow operator and safety training is raising
Safety Training courses Lift Truck / reach / order picker / walkie
■New Operator 5-day
■New Operator 3-day
■Existing Operator
■Refresher
■Order Picker
■Reach Truck
■Walkie/Rider Pallet Truck
■ Mid-Term Refresher
Crane
■ Bridge
■ Gantry
■ Jib
■ Monorail
■ Semi-Gantry
■ Basic Hoist
Aerial Work Platform
■ Scissor Lift
■ Boom Lift
■Portable (Manual) Lift
Other Material handling Equipment
■ Skid Steer
■Front End Loader
■Hand Trucks
■Personnel Movers
Hazardous Material
■ TDG (Transportation of Dangerous Goods)
■WHMIS
Train the Trainer
■ Instructor Training
■ Lift Truck
■ Lift Truck Refresher
■ AWP (Aerial Work Platform)
■ Crane
■WHMIS
Miscellaneous certificate Programs
■ Propane Filling
■Propane Exchange & Handling
■ Battery Maintenance
Seminars (Awareness)
■Dock Safety
■Fall Protection
■Pedestrian Safety
■Plant Assessment
■ Supervisor Awareness
16
lift TRUCK
New Operator Training: 3-Day
This is a fully comprehensive course
designed for an individual with little or no lift
truck experience. This course is comprised
of intensive classroom instruction, including
discussion and a written test, as well as
hands-on practical training and evaluation.
Upon successful completion of the course,
the operator will be presented with a lift
truck certificate as proof of training.
Existing Operator Training
This well-balanced program is ideal
for the operator who has experience
driving, but has not had previous
training. Topics covered include:
• Occupational Health and Safety Act
• Pedestrian Awareness
• Basic Principles: Lift Truck
Design/Operation
• Pre-operation Inspection
• Battery and Propane Exchange
• Ministry of Labour Guidelines
• Theoretical and Practical Evaluations
Train-the-Trainer Forklift: 3-Day
This three-day course is geared toward
your company’s dedicated trainer or an
experienced presenter who has had
exposure to the equipment. It is designed
to provide your company with trainers who
will have both factual knowledge as well as
the ability to present the material to your
operators. There is an explanation of
mandatory training topics, liability,
documentation, evaluation and practical
hands on training, to ensure that the
trainers understand relevant evaluation
points. This class includes a Reference
Manual, a workbook for trainers, sample
documentation forms, and a certificate.
This course can either be held on-site at
your location, or at one of our Liftow Lift
Truck Training Centres.
Instructor Training: 5-Day
This is a five-day program, designed to
take an individual with lift truck exposure
and teach them how to be an effective
trainer. This course will provide your
company with an in-house trainer who
will have both factual knowledge as well
as the ability to present the material to
your lift truck operators. This program will
be specifically geared to your application
and equipment, and can be conducted
at either our training facility or at your
location. This class includes a Reference
Manual, a workbook for trainers, sample
documentation forms, and a certificate.
Mid-Term Refresher 4 hours (theory)
This four-hour theory course is designed
for the operator who has previous certification,
but requires updated training and legislation.
Ministry guidelines and safe driving practices
will be covered, and the program will be
specifically geared to your application and
equipment. This course will provide the
attendee with a Lift Truck Certificate upon
successful completion of the theoretical
component.
cRANE
Crane Train-the-Trainer: 3-Day
Overhead Crane & Rigging
A program designed specifically for
the experienced crane operator.
Some of the topics covered include:
Day 1:•Introduction to Overhead
Crane Training
•Occupational Health and
Safety Act for Ontario
Day 2:•Crane Safety
•Rigging Hardware and Basic
Principles
Day 3:•Slings & Operation
Procedures
Rigging & Hoisting Training
A course to train operators on the
principles on rigging and hoisting.
Some of the topics included are:
• Occupational Health and Safety Act
• Inspection of Hoists and Slings
• Basic Principles of Hoisting
• Hitches and Sling Angles
• Lifting Hardware and Attachments
• Hoisting Safety
• Hand Signals
Training
the standard for a safer work environment.
Overhead Crane Training
Day 2:•Pedestrian Safety
•Basic Principles of Stability
• Teaching Techniques
• Basic Fall Protection
A program designed specifically
for the novice crane operator.
Topics covered include:
• Occupational Health and Safety Act
• Inspection of Cranes and Slings
• Basic Principles
• Hitches and Sling Angles
• Lifting Hardware and Attachments
• Crane Safety
• Hand Signals
• Turning Loads
• Crane Operation on Actual Site
MATERIAL HANDLING
EQUIPMENT
Skid Steer/Loader Training
Some of the topics included are:
aERIAL WORK PLATFORM
Aerial Work Platform
This well-balanced program is ideal for the
operator who has no experience but would
like to learn to operate an aerial work
platform.
Topics covered include:
• Occupational Health and Safety Act
• Securing Area
• Basic Principles
• Inspection/Pre-shift Operation
• Operation of Unit
• Fuel Source
• General Safety Rules
• Ministry of Labour Guidelines
• Proper Use and Inspection of Appropriate
Fall Protection
Train-the-Trainer: 2-Day
Aerial Work Platform
Liftow’s Aerial Work Platform Training is
designed for both new and experienced
operators. This course will discuss topics
relating to the safe use and operation of
aerial work platforms including: OSHA
legislations, pre-operational inspections,
battery care and maintenance.
Day 1:•Introduction to Aerial Work Platform Training
•Occupational Health and
Safety Act for Ontario
• CSA Standard B354.2-01
• Occupational Health and Safety Act
• Pedestrian Awareness
• Basic Principles & Operation
• Parts of a Loader/Bobcat
• Pre-Shift Operation
• General Safety Rules
• Hoisting Safety
• Hand Signals
WHMIS
WHMIS Training
This program is designed to educate your
employees on WHMIS and its importance
in today’s work environment.
Topics covered include:
• WHMIS symbols and classes
• WHMIS video presentation
• Material Safety Data Sheets
• Workplace labels
• Routes of entry of hazardous
materials
• Preventative measures
• General discussion
• WHMIS quiz
NOTE: we also offer WHMIS Train-the-trainer
SEMINARs
Transportation of
Dangerous Goods
• Introduction
• What’s New
• Act and Regulations
• Training
• Classification and Identification
• Means of Containment
• Safety Markings
• Documentation
• Exemptions and Special Cases
• Other Modes of Transport
• Reports and Accidental releases
Fall Protection Training
• Emergency evacuation procedures
Fall protection legislation
• Employer, supervisor, worker responsibility
• Regulations for fall protection
• Standards for fall protection
Fall protection system
• Talk about how to remove the hazard
• Explain what fall protection system involves
• Explain passive vs. active systems
• Primary and secondary systems
Fall protection considerations
• Swing fall
• Total fall distance
Fall protection components
• Body support, connectors, anchorage, & rescue
Supervisor Awareness 4 hours
A seminar designed to provide your
supervisors with information that will
allow them to be effective at their jobs.
Topics covered include:
• Current Legislation
• Due Diligence
• C.S.A Standard B335.94
• Pedestrian Safety
• Responsibilities of the Supervisor
• Walk-around Inspections
• Safe Operating Procedures
• Ministry of Labour Guidelines
Get Liftow Certified!
Don’t compromise! When you see the “Liftow Certified” seal of excellence you can rest assured
that our graduates have been trained and certified by the industry leader in safety training.
Liftow is committed to creating a safer workplace by continually setting and exceeding the standard.
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
17
whmis
COMPLETE W.H.M.I.S. INFORMATION CENTRE
W.H.M.I.S. INFORMATION CHART
The W.H.M.I.S. Information Centre prominently displays pertinent
information on all aspects of W.H.M.I.S. including class symbols and
labeling and meets all general aspects of W.H.M.I.S. complience.
This brightly coloured display is built with a strong, durable 1/4 “ sturdy
flextop plastic and comes complete metal pockets to hold M.S.D.S
binders up to 4” thickness.
This general knowledge W.H.M.I.S. wall chart provides detailed
information on proper W.H.M.I.S. labeling, description of class symbols,
personal protective equipment symbols, M.S.D.S., and also outlines the
responsibilities of suppliers, employers and employees.
Item
W9097
Description
WHMIS Information Center 18” x 24”
with 2” MSDS Binder
Price
$194.00
Item
W9094
Description
Price
WHMIS Information Chart 24” x 36”
$104.99
M.S.D.S. CENTRE
M.S.D.S. BINDERS
Clearly show all employees where they can access vital information
about their workplace M.S.D.S.’s. The Centre comes complete with
1 sturdy metal pocket for M.S.D.S. binder, with a sturdy 1/4” plastic
board. Centre is 18” x 24” and come with a printed M.S.D.S. (2”)
binder with A-Z dividers.
Keep your M.S.D.S. material safety data sheets organized with durable
M.S.D.S. binders. Standard binder format 3-ring with triggers. Printed in
bright red, these binders will be highly visible in your workplace. They are
available in both 2” and 4” spine sizes. Binders hold standard 8-1/2” x 11”
sheets. Large 4” binders have 3-1/2” slant-D rings for extra capacity.
Binders come with heavy duty “A-Z” dividers.
Item
W9002
Description
Price
Item
Description
MSDS Information Center 18” x 24” with
2” MSDS Binder
$169.00
W9094
W9100R
MSDS Binder 2”
MSDS Binder 4”
* Shipping extra unless otherwise stated.
18
Price
$27.99
$32.99
* prices are subject to change without notice.
Training Videos / DVDs
WHMIS for Workers
Under WHMIS legislation, everyone
who is exposed to hazardous materials
is required to receive WHMIS training
so that they have the knowledge to
identify hazards, and protect themselves
from accidents or illness.
Video-Based Self Study Program
only
support
materials
199
$
00
included!
add extra
support
materials
7750!
$
Each Package Includes:
• 1 (45-minute) WHMIS
Training Video
• 5 Participant Guides
• 1 Administrator’s Guide
• 5 Certificates
• 5 Wallet Cards
WHMIS is an video training program • 1 (17” x 22”) WHMIS Symbol
Recognition Poster
that is educational and interactive!
WHMIS For Workers Video Training Program(DVD)
$
00
wdvd .......................................................................................
199
WHMIS For Workers Video Training Program(VHS)
$
WFW................................................................................................
19900
WHMIS Package Deal
Get 10 manuals, 10 exams, and 10 wall & wallet certificates
WHPKG.......................................................................................... $7750
Propane Cylinder Exchange
Training Program
Lockout/Tagout
Training Program
support
materials
Back Safety 101
only
15000
$
included!
only
19900
$
support
materials
included!
Research indicates that the uncontrolled release of hazardous energy
causes more than 100 fatalities and 60,000 injuries each year.
Train your employees on how to deal with propane safety, while
complying with Ministry of Labour training requirements. This
Lockout/Tagout is the most effective way to control hazardous
energy and is required by law when performing tasks such as the in-depth, self-study program covers everything your in-house
trainer needs.
maintenance, repair, and cleaning of any piece of equipment.
This back safety video will help your
employees identify ways in which they
may be harming their backs. This
video also offers simple solutions to
What’s Included:
1 instructional video (40 mins), 1 record of training (ROT), improve ergonomics in the workplace.
1 participant’s manual, 1 participant’s test,
(16 mins)
1 propane safety poster, 1 propane safety sticker.
Back Safety 101 Video
$
00
BS101-G........................
Each Lockout/Tagout Kit includes:
• 1 Lockout/Tagout video cassette (33 mins)
• 5 Participant guides (including quiz)
• 1 Administrator guide, 5 wall certificates
• 1 Lockout/Tagout poster, and
• 1 Health and safety action plan
49
Lockout/Tagout Training Program VHS
$
LOTOP-G...............................................
19900
Propane Training Program
$
PROK........................................
15000
Lockout/Tagout Training Program DVD
$
LOTOPDVD-G........................................
19900
Propane Training Program
$
PROKDVD.................................
15000
Back Safety 101 DVD
$
BS101DVD-G.................
4900
Additional Support Materials for Lockout/tagout & Propane
Lockout/Tagout Wall Certificates
(Package of 10)
$
LOTOWC. .........................................
1250
Lockout/Tagout Participants Guide
$
LOTOPG. ..............................................
750
Propane Manual
$
PROM..................................................
750
1 Package (1 Record of Training, 1 Manual,
1 Participant’s Test)
$
ROT.................................................
1000
Lockout/Package Deal
(10 Participants Guide, 10 Wall Certificates)
$
50
LOTOPKG..........................................
77
Propane/Package Deal
(10 Records of Training, 10 Manuals, 10 Participant’s Tests)
PROPKG..........................................
$
7750
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
19
Training Videos / DVDs
available
available
IN french!
Counterbalance Lift Truck
Narrow Aisle Lift Truck
Each package includes:
• 1 (45 minute) lift truck training video
• 1 (15 minute) Danger Zone Video (optional)
• 1 Operator manual
• 1 Operator exam
• 1 Instructor guide
• 10 Wall certificates
• 10 Wallet cards
• 1 (17”x 22”) Poster
Each package includes:
• 1 (30 minute) Training video
• 1 Operator manual
• 1 Operator exam
• 1 Instructor guide
• 10 Certificates
• 10 Wallet cards
• 1 (17”x 22”) Poster
This program covers internal combustion and
electric counterbalance lift trucks.
329
42900
32900
42900
00
32900
42900
32900
32900
32900
DVD VERSION
Narrow Aisle DVD Kit
$
(C)NAKDVD..................................
Narrow Aisle DVD Kit French
$
(C)NAKFRDVD..............................
Pallet Truck Video Kit
$
(C)PTKE........................................
Pallet Truck Video Kit
$
French (C)PTKFR..........................
The perfect video for refresher
training for forklift operators
meetings. Watch clips of an
operator committing safety
infractions. See if your staff
can pick out what is being
done wrong. It’s both
educational and fun! (11 mins)
What’s Wrong With This Video
$
WWWT-G.......................................
4995
What’s Wrong With This DVD
$
WWWTDVD-G................................
4995
17500
17500
DVD VERSION
329
32900
00
Pallet Truck DVD Kit
$
(C)PTKDVD...................................
Pallet Truck DVD Kit French
$
(C)PTKFRDVD...............................
17500
17500
Support Materials
Support Material
Package
Deal
Manuals,
Exams,
Guides
& Certificates
10- Manuals,
10- Exams,
10- Wall Certificates
10- Wallet Certificates
42900
What’s Wrong
With This?
20
Each package includes:
• 1 (15 minute) video
• 1 Operator manual
• 1 Operator exam
• 1 Instructor guide
• 10 Certificates
• 10 Wallet cards
• 1 (17”x 22”) Poster
VHS VERSION
Narrow Aisle Video Kit
$
(C)NAKE.......................................
Narrow Aisle Video Kit
$
French (C)NAKFR.........................
Item
* Shipping extra unless otherwise stated.
This program covers pallet trucks.
VHS VERSION
VHS Version
DVD!
Pallet Truck (Low Lift)
This program covers narrow aisle or
order picker lift trucks.
DVD Version
available
on
DVD!
DVD!
Counterbalance DVD Kit
$
(C)CBKDVD...................................
Counterbalance DVD Kit with
Danger Zone &
What’s Wrong With This
$
(C)CBKDWDVD.............................
Counterbalance DVD Kit French
$
(C)CBKFRDVD...............................
Counterbalance DVD Kit with
Danger Zone French
$
(C)CBKDFRDVD............................
IN french!
available
on
available
on
Counterbalance Video Kit
$
English (C)CBKE ..........................
With Danger Zone Video
$
English (C)CBKD...........................
Counterbalance Video Kit
$
French (C)CBKFR ........................
With Danger Zone Video
$
French (C)CBKDFR.......................
available
IN french!
(C)CBOM
(C)CBOMFR
(C)CBOE
(C)CBOEFR
(C)CBIG
(C)CBIGFR
(C)NAOM
(C)NAOE
(C)NAIG
(C)PTOM
(C)PTOE
(C)PTIG
(C)CERT
(C)CERTFR
Description
Price
SAFE Counterbalance Operator Manual
SAFE Counterbalance Operator Manual (French)
SAFE Counterbalance Operator Exam
SAFE Counterbalance Operator Exam (French)
SAFE Counterbalance Instructor’s Guide
SAFE Counterbalance Instructor’s Guide (French)
SAFE Narrow Aisle Operator Manual
SAFE Narrow Aisle Operator Exam
SAFE Narrow Aisle Instructor’s Guide
SAFE Pallet Truck Operator Manual
SAFE Pallet Truck Operator Exam
SAFE Pallet Truck Instructor’s Guide
SAFE Certificates (10 wall, 10 wallet)
SAFE Certificates (French, 10 wall, 10 wallet)
$7.50
$7.50
$2.00
$2.00
$7.50
$7.50
$7.50
$2.00
$7.50
$7.50
$2.00
$7.50
$12.50
$12.50
Counterbalance Package Deal
(C)cbpkg-f......
$7750
Narrow Aisle Package Deal
(C)napkg-f......
$7750
Pallet Truck Package Deal
(C)ptpkg-f......
$7750
Savings
of $30
* prices are subject to change without notice.
Training Videos / DVDs
HUGE
savings!
All Forklift
training
Programs
training
overheads
included!
choose
VHS or
DVD!
IN ONE
DVD!
Lift truck training is now easier and more
convenient. The DVD incorporates all the
SAFE-Lift Training Program onto one convenient disc.
It is menu driven, so you can simply click on the
program you wish to show and click on the
module that you would like to view.
Comes With
• Counterbalance English & French
• Narrow Aisle Forklift
•
Pallet Truck
With Bonus!
• Pedestrian Safety English & French
• What’s Wrong With This?
(Refresher Training)
Save
Danger Zone Pedestrian Safety Video
Over one third of all lift truck related accidents
involve pedestrians. Establish a pedestrian safety
program before a near miss happens! Features
the song “Danger Zone” by Kenny Loggins for
added entertainment.
iNSTRUCTOR’S
Ultimate Training Package
Give your instructors the necessary tools for
effective lift truck operator training with the
Ultimate Training Package.
VHS VERSION
Everything you see above is included:
1All-In-One DVD Training Program
Includes: Counterbalance, Narrow Aisle &
Pallet Truck Training
What’s Wrong With This? -Refresher Training Video
Danger Zone- Pedestrian Safety Video
1 Model lift truck of your choice
1Wire lift truck for training
1High Impact Forklift safety video
10Operator manuals of your choice
10Operator exams of your choice
10Wall/wallet certificates of your choice
11 Training Overheads
1 Lift truck training reference manual
Over $500
(C)UTPDVD (DVD Version)..............
$
Each package includes:
• 1 (15-minute) Training video
• 1 Instructor guide
• 2 Laminated safety signs
• 1 (17”x 22”) Poster
Danger Zone Video Kit
$
DZE-I (English).............................
Danger Zone DVD Kit
$
DZEDVD-I (English).....................
DVD VERSION
Danger Zone Video Kit
$
DZF-I (French).............................
Danger Zone DVD Kit
$
DZFDVD-I (French)......................
1
1
1
1
1
1
1
1
1
1
1
1
3
10
Counterbalance Instructor Guide (English)
Counterbalance Instructor Guide (French)
Narrow Aisle Instructor Guide
Pallet Truck Instructor Guide
Counterbalance Operator Manual (English)
Counterbalance Operator Manual (French)
Narrow Aisle Operator Manual
Pallet Truck Operator Manual
Counterbalance Examination (English)
Counterbalance Examination (French)
Narrow Aisle Examination
Pallet Truck Examination
Safety Posters
Certificates (Wall and Wallet)
SAFE-Lift DVD Package
$
CDVDS........................................
49900
17900
17900
Scale Model Lift Trucks
Toyota 7-Series LPG
$
00
7LT-A...........
35
999
00
Toyota Electric 3-Wheeler
$
00
EP3W-A.......
35
Graphic forklift accident re-enactments!!!
Each package will also include the
following support materials:
17900
17900
BT Narrow Aisle
$
00
NALT-A........
Updated
Version
40
BT Pallet Truck
$
EPLT-A.........
4000
More High Impact
Forklift Safety
Wire Lift Truck
Graphical re-enactments of industrial accidents.
Great for training your operators on accident
awareness and prevention. (15 mins)
More High Impact Safety VHS
$
35000
More High Impact Safety DVD
$
35000
MHIFS-E .........................................
MHIFSDVD-E...................................
Teach your operators about the center of gravity
with this clever training tool. Ideal for lift truck
trainers. Galvanized steel 4”W x 5”H.
Wire Lift Truck
$
WRLT-D....
16000
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
21
mirrors
Full Dome Mirror-360º View
•
•
For four-way intersections
Comes complete with chains & hooks for hanging
( T-bar clips available on selected drop ceilings)
• Edges protected with steel-reinforced, black bumper
• Exterior option available on selected sizes
Item
Diameter
Half Dome Mirror-180º View
Quarter Mirror-90º View
•
•
•
•
•
•
For “T” intersections
Should be fastened to wall or ceiling
If hanging is required, use a 360º full dome
Edges have steel-reinforced,
black protective bumper
• Exterior option available on selected sizes
Price
Item
Diameter
FD18
18”
$125.00
HD18
18”
For corner intersections
Must be fastened to ceilings (if ceiling
can’t be used for mounting, use a convex
mirror instead)
Item
Diameter
$77.00
Price
QD18
18”
$40.00
Price
$52.00
FD24
24”
$163.00
HD24
24”
$89.00
QD24
24”
FD33
33”
$301.50
HD33
33”
$165.50
QD33
33”
$90.50
FD48
48”
$475.00
HD48
48”
$240.00
QD48
48”
$137.00
Mirror Viewing Angles
360º View
180º View
Interior Convex
•
•
> 100 Degree angle of view
Ball & swivel plate attached directly
to mirror for lightness and economy
• Complete with telescoping arm and
mounting bracket
Convex (for longer distances)
90º View
Exterior convex
•Shatterproof
•20% Brighter than glass
•
•
•
•
> 100 Degree angle of view
Ball & Swivel bolted to weatherproof back
Mirror has weatherproof metal frame
Complete with telescoping arm and
mounting bracket
• High wind option available (airports, etc.)
•Discourages in plant theft
and vandalism
•Increases security in
parking areas
Item
Diameter
Price
IN12
12”
$55.00
IN18
18”
$73.00
IN26
26”
$110.50
IN30
30”
IN36
36”
and quality control areas
Item
Diameter
Price
EX12
12”
EX18
18”
$95.00
EX26
26”
$142.50
$136.00
EX30
30”
$196.00
$173.00
EX36
36”
$247.00
* Shipping extra unless otherwise stated.
22
•Improves vision of production
$73.00
* prices are subject to change without notice.
Battery Safety
Battery Roller Service Stands
Easy Battery Tugger
Designed for removal of a battery for watering and maintenance.
Item
• SINGLE STANDS
Acid-proof powder coat paint
• Battery safety stop
• Rubber backstop(s)
• All heavy duty welded construction
• PVC (non-conductive) 2 ½” rollers
• Manufactured in 3” increments
SRS-15-7-C
SRS-15-7-C-DT*
SRS-18-7-C
SRS-18-7-C-DT*
SRS-21-7-C
SRS-21-7-C-DT*
SRS-30-7-C
SRS-30-7-C-DT*
DOUBLE STANDS
DRS-15-7-C
DRS-15-7-C-DT*
DRS-18-7-C
DRS-18-7-C-DT*
DRS-21-7-C
DRS-21-7-C-DT*
DRS-30-7-C
DRS-30-7-C-DT*
width
price
15”
15”
18”
18”
21”
21”
30”
30”
$483.42
$643.22
$513.37
$664.17
$540.11
$690.91
$619.25
$794.65
15”
15”
18”
18”
21”
21”
30”
30”
$775.40
$966.84
$902.67
$1,094.12
$945.45
$1,136.90
$1,067.38
$1,368.98
Battery Roller Service Stands w/ Charger Shelf
Designed as a complete service charging station. Ideal for keeping chargers
up to 800 pounds in a safe place off the floor.
width
price
SINGLE STANDS
SRS-15-7-C-CS
SRS-15-7-C-CS-DT*
SRS-18-7-C-CS
15”
15”
18”
$627.81
$778.61
$657.75
SRS-18-7-C-CS-DT*
18”
$808.56
SRS-21-7-C-CS
21”
$700.53
SRS-21-7-C-CS-DT*
21”
$851.34
SRS-30-7-C-CS
SRS-30-7-C-CS-DT*
DOUBLE STANDS
DRS-15-7-C-CS
DRS-15-7-C-CS-DT*
DRS-18-7-C-CS
DRS-18-7-C-CS-DT*
DRS-21-7-C-CS
DRS-21-7-C-CS-DT*
DRS-30-7-C-CS
DRS-30-7-C-CS-DT*
30”
30”
$795.72
$971.12
15”
15”
18”
18”
21”
21”
30”
30”
$935.83
$1,127.27
$1,063.10
$1,254.55
$1,137.97
$1,329.41
$1,259.89
$1,561.50
Note: when ordering specify height from floor to top of roller.
* With Acid Proof Drip Tray
** Charger Not Included
Wall Mounted Charger Brackets
Reduces floor damage of chargers and allows for a clean
and safe floor area. (universal fit).
Wall Mounted Charger Brackets
$
WMCB-24-18.....................................................
8770
Charger Not Included
• Mounted on pallet truck base with a positive brake system
• Electro-magnetic battery extraction
• Handles batteries up to 22” wide, up to 3,000 lb.
• Lifting range from 6.5” to 11.5”
• Built-in 110-V plug-in charger and 12-V maintenance-free battery
• Acid-proof powder coat paint
Easy Battery Tugger
$
EZBT-24-12.............................................................................
5,34225
Battery Lifting Beam
Note: when ordering specify height from floor to top of roller.
* With Acid Proof Drip Tray
**Also Available in Triple Stand Configuration.
Item
The electric push/pull mechanism allows for push-button
removal and replacement of batteries, and substantially
reduces the risk of injuries to the operator. Ideal for battery
watering and maintenance.
This 36” battery lifting beam with a
standard 6,000 lb. capacity is designed to
fit 27-42” industrial batteries. Lifting hooks are adjustable to fit most
batteries. Lifting Beam can be used in conjunction with a Fork Mounted
Hook Plate.
Battery Lifting Beam (58 lbs. net weight)
$
BLB6000-B.............................................................................
75000
Hook Plates
Item
LM-hp6-S-b
LM-hp6-R-b
Hook Type
Overall Size
Capacity
Price
Swivel
Rigid
6” x 24”
6” x 24”
6,000 lbs.
6,000 lbs.
$195.00
$190.00
Get maximum equipment run-time with the
PowerPulse Battery Maintenance System!
• PowerPulse is not a charger. It’s a performance
system that prevents dead batteries by keeping
lead-acid batteries in peak condition
•Ideal for vehicles and equipment used
frequently or charged on a regular basis
•Helps batteries charge faster and maintain
greater reserve capacity
•Safe, reliable, durable and easy to install
Starting at
5095
$
PowerPulse Battery Maintenance System
$
PP-12-L-C (12v).............................................................................
$
PP-24-L-C (24v).............................................................................
$
PP-36-L-C (36v).........................................................................
$
PP-48-L-C (48v).........................................................................
5095
8595
10395
12595
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
23
Battery SAfety
THE DISSIPATER
Starting at
10800
$
call for a
free demo
•
•
•
•
The only way to water!
Battery Cap Replacement
Automatic Battery
Watering System
The latest in battery maintenance technology.
Fillwatch is the only single point watering
system that operates under ‘hydrodynamics’. Simple and reliable, with only 2
moving parts. The Fluid Level Indicator
provides a battery’s watering needs at
a glance; single point delivery reduces
watering time dramatically.
1 Returns 80% of evaporated water
2 Prevents acid overflow during charging
3 Instantly tells you the water level of every cell
4 Ergonomically designed for easier use
•
•
5 Filters harmful emissions
Call for a free demo 1-866-GO-LIFTOW(465-4386)
•
Dissipater (individually priced but sold in groups of 12)
7 ea
$ 50
DISSB-C................................................. 7 ea
(BBI, C&D, Crown, Deka, GNB, Hawker)
$ 50
DISSA-C.................................................
(Exide, General)
Watering Cart
10 gallons. Contains built-in 12 volt pump, battery
and charger. Pump automatically turns off when fill
lever is shut off. Watering gun sold separately
Portable Watering Cart
$
CARTW-C.............................................
59900
fw6bay-a*
12 volt, 6 cells
$108.00
fw12bay-a*
24 volt, 12 cells
$216.00
fw18bay-a*
36 volt, 18 cells
$324.00
fw24bay-a*
48 volt, 24 cells
$432.00
usprg kit-a
Pressure regulator, refilling hose
$188.50
•
•
Not available for GNB batteries. Please call for pricing on
replacement and accessory parts
*A pressure regulator and refilling hose is required to operate the system.
De-Ionizer - Battery Water
Filtration System
Cleans standard tap water and allows it to be used for lead
acid batteries. Removes iron and other trace minerals that can
shorten battery life. One cartridge cleans approximately 600
gallons.
17500
Pinched battery cables cost $200.00 to
replace. This tough vinyl hose completely
covers each separate battery cable, stopping
cables from being cut. Kit includes 6’ of hose,
tie downs and instructions.
12500
This complete Battery Safety
Kit mounts conveniently on any
wall so that everything is within
easy reach. The self-contained
kit comes with: neoprene safety
gloves, safety goggles, face
shield, apron, flashlight and
hydrometer.
Complete Battery Handling PPE Kit
$
BCHG-E.........................................................................................
39500
Battery Cable Protectors
Complete Battery
PPE Kit in a Box!
24
Price
De-Ionizer replacement cartridge
$
DW-CAR-D.......................................................
Just insert into the battery cell and pull the trigger.
Automatically fills the cell to the correct level, then
shuts off. Never overfill a battery cell again.
* Shipping extra unless otherwise stated.
Description
De-Ionizer
$
DW-KIT-D........................................................
Battery Watering Gun
Battery Watering Gun
$
SFS-100-D...................................
Item
No over-filling
No missed cells
No spills
Quick and easy,
one point connection
Increase safety:
operators are never
exposed to the
battery’s corrosive
electrolyte
Polycarbonate
construction: Fillwatch’s protective
‘helmet’ provides a tough shatter-proof
shield.
Easy access for specific gravity
inspections
The adjustable pressure regulator
is the most cost effective water supply,
offering an unlimited source directly
from a standard hose tap.(required)
Custom water levels: Fillwatch’s
10 float sizes allow for customized
watering levels as per manufacturer’s
specifications for just the right level
every time.
9995
Battery Cable Protectors
$
CABPRO-B.......................................
3900
Batt 1000 - Battery Cleaner and Protector
Formulated to penetrate and emulsify dirt, grease and corrosive
deposits(acid) to protect and to lengthen the life of your battery.
A safe, fast and convenient method of neutralizing battery acid.
Just spray and wipe clean with a rag.
Batt 1000
$
95
B1000-G...........................................................................
12
Batt 1000 -Case of 12
$
B1000-12-E......................................................................
9995
* prices are subject to change without notice.
Battery Safety
Battery Spill Kit
Bonus!
Each kit includes:
Highly visible
signs and
inspection tags
are free with
every model
you order.
1- Orange nylon mini spill kit bag
2- Clear 4 ml poly disposable bags 26” x 40”
2- Hazardous waste labels and ties
10- HAZMAT yellow, bonded, heavyweight pads
3- HAZMAT yellow absorbent socks, 3” x 4”
1- 1L jug of Multizorb universal sorbent
Shower/Eyewash
Battery Spill Kit
$
OSK-MSKFT-H-C......................................................................
9995
as low as
539
$
• Combination shower/eyewash station
• Exceeds minimum water flow: 20 gpm shower and .4 gpm eye wash
• Impact-resistant plastic shower and bowl
• 10” diameter shower head and eye wash bowl
• Flow control for safe water flow
• Pop-off protective spray head dust covers
• Galvanized steel pipe with protective Bradtect™ coating
Shower/Eyewash
$
S19-310.........................................
High Performance Protective Eyeware
Sleek, lightweight and durable. These stylish pieces of eyeware are not
just sun glasses but high performance protective safety glasses.
Soft rubber temple tips along with its ergonomic design makes for an
extremely comfortable fit. Select from three styles (silver, black, or
clear lens) and promote safety in the workplace.
Best
Value!
High Performance Protective Eyeware
each
12+
$
5328004 (Clear)............................................... $599 $569
$ 65 $ 29 $
5328424 (Silver).............................................. 6 6 $
5328774 (Indoor/Outdoor)............................... $709 $674
72+
539
598
639
Water Treatment Additive
Promotes end-user safety by reducing harmful bacteria
and organisms in water supply. This 8 oz. bottle of
water treatment additive treats 6 to 20 gallons for up
to 4 months.
Water Treatment Additive (pack of 4)
3800
$
S19-865.....................................................
Faucet-Mount Eye Wash
•
•
•
•
•
•
Note: faucet not included
Chrome-plated brass pipe and fittings
One-step activation
Flow control for safe water flow
Pop-off protective spray head dust
covers
Exceeds minimum water flow:
.4 gpm at 30 psi
Adapters included
Shower/Face wash
$
S19-200B............................
9900
1,08500
Wall-Mounted Eye Wash
This unit connects directly to the water line
to provide an uninterrupted flow. Comes
with two ABS plastic heads and 10” bowl.
Push plate actuator opens water valve.
Connects to 1/2” NPT water line. Made
from highly visible yellow impact-resistant
plastic. Includes wall-mounting brackets
and tailpiece.
Wall Mounted Eye Wash
$
S19-220............................
32500
Gravity Feed Eye Wash
Use this eye wash anywhere a plumbed water
supply isn’t available. This 7 gallon unit easily
mounts to any wall. Pull down tray stays in fixed
position during activation. Will allow 15 minute flow
at 0.4 gpm output. Transparent yellow polycarbonate
tank allows you to see at a glance when it’s time to
clean or refill. Wall brackets included.
Gravity Feed Eye Wash
$
S19-921..............................................
37000
32oz Single/Double Bottle Eye Wash
Station w/ Mirror
First step eye station is designed for immediate first
aid treatment while getting the victim to a proper
eye wash station. Each station includes: double
panel with mirror and two 32oz full squeeze bottles.
32oz Single Bottle Station
$
S19-821..............................................
32oz Dual Bottle Station
$
S19-903..............................................
3500
5900
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
25
Propane safety
Propane handling solutions for a safer workplace.
Propane Cylinder Handling
Gloves
Just
9
$ 95
Never misplace your gloves
again with this convenient
and practical “handy” idea.
“On Hand by Dan” gloves are used to
safely change propane cylinders. Attach
to the overhead guard to ensure that they
are readily available.
Propane Cylinder Handling Gloves
$
ohbd-E.....................................................................
Propane Cylinder Handling Gloves- 5 Pairs
$
ohbd5-E...................................................................
2495
9995
Retracto-Glove
The Retracto-Gloves is a practical product
to ensure that it is always available as they
securely attach to your lift truck.
Cylinder Retracto-Glove
$
RETRC-E...................... 2495
Carbon Monoxide Detector
Passive Multi-level CO Detector Card
Here is a low cost method to determine if your
lift trucks are producing dangerous levels of
carbon monoxide. Just place one of these
cards in the warehouse. If it changes color,
you need to address your lift truck emissions.
Carbon Monoxide Detector Card
$
CARB-E...............................................
995
Features:
• Minimum 18-month product life
• Multi-level detection:
normal, caution & danger
• Perfect for the warehouse,
office or confined space area
•Unique packaging protects
sensor from contamination
• This visual detector is about
the size of a credit card
Portable Carbon Monoxide Detector
Glove retracted
when not in use
Chain long enough
to reach coupling
PPE -4- LPG
Personal Protective Equipment for Liquid Propane Gas
The PPE for LPG contains all of
the required PPE to change propane
tanks. Each kit comes complete
with a pair of safety gloves, safety
glasses, a leak detector and a full
set of easy to follow instructions.
It is also available in two very
convenient options. The wall board
can be mounted in the propane
changing area, or the truck version
can be mounted directly onto the
overhead guard of the truck for easy accessibility.
Complete Propane PPE on a Board
$
PPEB-E............................................................
* Shipping extra unless otherwise stated.
26
5995
•
•
•
•
•
•
Portable alarm warns employee if high CO levels are present
Small size: 3-3/4” x 2-5/8” x 1”
only
Light weight: Only 5 ounces
$
99
Clips to a lift truck dash, or can be worn on belt
5-year limited warranty
9-volt Duracell battery included
65
Portable Carbon Monoxide Detector
$
908-00002-01-B........................................................
6599
Low Propane Fuel Indicator Kit
•Warns operator of low propane fuel
Price
00
•Fits all propane systems
$
• 12 volt system
•Comes with warning indicator light
•Audible alarm option available
•Red light on dashboard will activate once the propane cylinder is close to empty.
New low
50
Low Fuel Indicator Kit
$
N15-0013-1A...............................................................................................
5000
Low Fuel Indicator Kit w/ Audible Alarm
$
N15-0012-1A...............................................................................................
5000
* prices are subject to change without notice.
Propane safety
only
Technocarb
399
$
00
Stand-alone Air/Fuel Management
Closed Loop System
This proven automotive technology has now
been adapted to fit all lift truck carburetion
systems. An oxygen sensor in the exhaust
manifold detects if the engine air/fuel
ratio is too rich or too lean. The Omni III
automatically adjusts the proper fuel mixture
for maximum efficiency and lowest possible
harmful fuel emissions.
• Works with air valve and venturi
mixers
• Universal installation on all engines
• Built-in fuel mixture and diagnostic
indicators
• Plug and play wiring harness
• Factory calibrated
Technocarb System
$
OMNI-C..................................
49900
Three-Way
Catalytic
Converter
Reduce Exhaust
Emissions by
%
99
Once the carburetion system is properly
performing with a fuel/air controller, a
catalytic converter can provide additional
reduction in emissions by more than
99%. Catalytic converters are designed
for applications that require the lowest
possible emissions of carbon monoxide
(CO), nitrogen oxides (NOx) and
hydrocarbons.
Engine Displacement (in Litres)
1.0L - 2.6L*
$
00
DC4MV-B.......................
935
2.7L - 3.9L*
$
DC5MV-B...................
4.0L - 5.0L*
$
DC6MV-B..................
Quick & Easy Installation
108900
Every muffler-purifier is an exact OEM replacement muffler, making installation quick and
easy. The direct replacement design eliminates
the need for costly exhaust system modifications and downtime.
1,28150
*Pricing is approximate. Please call for a quote for your specific lift truck
Propane Cylinder Equipment Caddiest
LP Cylinder Loadert
•
•
•
•
•
•
Allows pick-up & placement of tanks on forklift
Designed to transport and
store up to 6 full LP tanks
Collapses for easy storage.
Powder coated for long-term
wear
Easy set-up and operation
3600 swivel boom
LP Cylinder Loader
$
LP-6-A . ..........................................................................
3,24000
Single Propane Cylinder Cart
Move propane cylinders safely and efficiently from
the storage area to the lift truck.
•
•
•
•
Loop Handle
14” x 45” Overall Height
Weight 27 lb.
10” solid rubber wheels
• Move cylinders safely
holds
• Designed to transport and
6 full lp
only
tanks!
store up to 6 full LP tanks
$
00
• Accommodates cylinders
12”D x 24” H
• Size: 27” x 31” x 29”
865
Cylinder Equipment Caddy
$
LP-170-A................................................................................
86500
Propane Cylinder
Storage Cabinets
•
•
•
•
All steel construction/rust resistant
Heavy duty steel angle frame
8 gauge galvanized wire
Horizontal or vertical storage available
*Cabinet may be different than shown
Single Propane Cylinder Cart
$
701-10PN...........................................
189
00
Item
Description
Overall Size (W x L x H)
GS-6
GS-10
GS-20
6 Cylinder Capacity
10 Cylinder Capacity
20 Cylinder Capacity
42.5” x 25.5” x 37”
30” x 30” x 63”
60” x 30” x 63”
Price
$580.00
$815.00
$1,260.00
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
27
Fall Protection
Lightweight Lanyard
Safety Harness &
Lanyard Combo
Harness &
Lanyard set
in one!
The Titan full body harness comes
complete with a 6 foot detachable shock
absorbing Lanyard. The full body harness
is made of lightweight, durable polyester
webbing with fully adjustable straps to fit
most workers. Designed to provide price
sensitive users with quality grade fall
protection. Meets with applicable ANSI
and CSA Standards.
Features:
• Lightweight, Durable Polyester
Webbing
•Fully Adjustable Designs
•Sliding Back D-ring
•Sub-pelvic Strap
Harness & Lanyard Combo
$
SFPTK4051Q-C....................
9995
Traffic Vest & Harness Combination
Where maximum visibility is required, this vest has combined a lightweight
mesh traffic vest with a trusted nylon
harness. This combination provides
Arkobrite II 3-D reflective tape (front and
back) on a florescent orange body vest
for optimum visibility.
Lightweight Lanyard
$
SFP6SALQ-C..........................
This retractable
lanyard allows for
maximum movement.
96” length.
Retractor Lanyard
$
FP0304-C...............................................................................
25000
Traffic Vest
High-Visibility mesh 5 point tear
away traffic vest with velcro closure.
Reflective side stripes with velcro
adjustments.
2195
22995
Warehouse Picker’s Harness
Safety Harness
This lightweight universal safety
harness has adjustable straps for
the leg chest or shoulder. It features
durable polyester webbing and fully
adjustable design. Also has sturdy
D-ring locks
Safety Harness
$
FP759/1DP-C..................
* Shipping extra unless otherwise stated.
28
6995
Retractor Lanyard
Traffic Vest
$
TV-7N............................
Comes in S, M, L & XL
Traffic Vest/Harness
Combo
$
FP700/3EDTV84L-C.......
This lanyard is lightweight and also
includes a shock absorber in case of a fall.
6’ in length will allow for maximum movement on an order picker.
7795
The Miller Warehouse Picker’s
Harness is designed with a
clever D-ring web extension
keeping the harness components further away from the
head to prevent interference
with the worker as well as
increase productivity. One size
fits all, a must have for the
warehouse. Available in stretch
and non-stretch versions.
Warehouse Picker’s Harness
FP850-2-U (non-stretch).......................................................... $19900
FPE850-2-U (stretch)............................................................... $23000
* prices are subject to change without notice.
Safety Accessories
NEW!
Prevent use of unsafe equipment.
Lock-out Box
Lift Truck Log
The Equipment Lock-Out box
will lock-out your lift truck
(or other equipment) until repairs
are made. Comes complete with
lock-out tag, straps and lock.
Complete Checklist System
The most complete Lift Truck
recording system on the market.
Lift Truck Log Includes:
• Daily Check Lists - 624
2-3 years
Kit includes: Log,
• Repair Request Forms - 24
supply
Plastic Case, Lock-out
• Accident Report Forms - 4
tag, and pull-strap
• Near-miss Report Forms - 4
• Lock-out Tag (required if truck unsafe to operate)
• PM Tracking History - 36 Events (know when to service each truck)
Lock-out Box
$
LOCKBOX-E.................
3995
Lock-out Tags
(Box of 25)
$
TAG25.........................
45
NEW!!
only
3995
$
95
Lock-out Applications at the ignition source:
All in one box that easily attaches to any lift truck!
Log Off
Log On
Couterbalance Propane Log Form “A”
Lift Truck Log Types
Date:
Time Start:
Meter Start:
Item
Time End:
Meter End:
Propane
Visual Check
Relief valve pointing up:
Fuel level:
No fuel leaks:
Safety straps secure:
Engine oil level:
Forklift
Overhead guard:
Tires/wheels:
Tilt cylinders:
Carriage:
Forks and locking pins:
Mast:
Lift cylinder & chains:
Capacity data plate:
Other:
Operator Controls
Radiator fluid level:
Air filter:
Fan belt:
Hydraulic oil:
Battery & connectors:
Seat belt:
Parking brake:
Service brakes:
Lifting & lowering controls:
Tilt controls:
Lights:
Horn & warning devices:
Gauges:
No oil leaks:
Optional - Attachments:
Other:
Pass / Fail
Engine
Description
Price
LOG(CB)-E
Propane Counterbalance
$49.95
LOG(E)-E
Electric Counterbalance
$49.95
LOG(N)-E
Electric Narrow Aisle
(reach & order picker)
$49.95
LOG(P)-E
Electric Pallet Truck
$49.95
Inspection Required:
Pass:
(See Form “B”) Fail :
Operator’s initials:
Forklift Battery
Connectors
110-220-550 Volt
AC Plugs
Forklift Propane
Connectors
Cylinders
Valves
Operational Check
only
4995
$
Sample Checklist
624 Events per Log
This form remains in Lift Truck Log
Replacement Log Books
$
RLOG-E..........................................................................................
12 Volt DC
Starter Batteries
2995
Make sure your lift trucks are safe to operate and prevent costly damage due
to lack of mandatory inspection.
get refill
packs only
stt r
es
B
Be
er
lle
l
l
e
S
Se
4595
$
Item
Checklist Caddy
• One Caddy 4 1/2” x 7” polyethylene
envelope with two-way tape for
easy mounting.
• One checklist pad with 75 inspection
carbon copy sheets available for:
Electric sit-down (E),
Propane sit-down (CB),
Narrow aisle (N),
Pallet (P) truck or
Aerial Work Platform (A)
•One pen with attached plastic wire
cOMES WITH
checklist
pad & pen
Description
Checklist Caddy (1 caddy, 1 checklist book)
Counterbalance Electric
SCADD(E)-E
Counterbalance Propane
SCADD(CB)-E
Narrow Aisle
SCADD(N)-E
Pallet Truck
SCADD(P)-E
Aerial Lift Platform
SCADD(A)-E
SCADDFR(E)-E Counterbalance Electric French
SCADDFR(CB)-E Counterbalance Propane French
SCADDFR(P)-E Pallet Truck French
Refill Pack (4 checklist books)
Counterbalance Electric
RCADD(E)-E
Counterbalance Propane
RCADD(CB)-E
Narrow Aisle
RCADD(N)-E
Pallet Truck
RCADD(P)-E
Aerial Lift Platform
RCADD(A)-E
Counterbalance Electric French
RCADD(E)-FR
RCADD(CB)-FR Counterbalance Propane French
Pallet Truck French
RCADD(P)-FR
Anti-Blind Spot Dome Mirror
Lift truck operators need to know what is going on all around the lift truck.
This mirror gives a complete 1800 view allowing the operator to give a
quick safety check before they travel in reverse. Installs on any lift truck in
seconds with 3M two sided tape. Also available with a durable magnetic
arm to attach to any metal surface.
Price
$29.95
$29.95
$29.95
$29.95
$29.95
$29.95
$29.95
$29.95
9” Dome Mirror with Double Sided Tape
$45.95
$45.95
$45.95
$45.95
$45.95
$45.95
$45.95
$45.95
9” Dome Mirror with Magnet Arm Unit
NOTE: Regulation states that a lift truck be inspected before the beginning of each shift and a record be
kept on file. The Checklist Caddy is a complete system that ensures the operator completes this important task.
The Caddy is a highly visible case that mounts anywhere on the lift truck. A guaranteed way to ensure everyone
does their safety inspections
9” Dome Mirror with Double Sided Tape
$
DOME-1-D............................................................................
3995
9” Dome Mirror with Magnet Arm Unit
$
DOMEM-1-D.........................................................................
5995
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
29
Safety Accessories
Seat Belts
Retractable
Seat Belt
stt r
es
B
Be
e
er
l
l
e ll
S
Se
SEBELT-C
Two Point Retractable
Lap Belt with Ignition
Isolation Switch
Anti-Cinch Comfort
Seat belt
BBLP-1204-409-C
BBLP-1204-417-C
These retractable seat belts have bright orange webbing to
ensure your operators are buckled up. All are 60” in length
and conform to all safety specifications. The optional ignition
isolation switch feature prevents the truck form starting
unless the seat belt is fastened. Anti-switch seat belts allow
for increased operator maneuverability.
Electronic Code Switch
Prevent unauthorized use
Anti-Cinch Comfort
Seat belt with
Ignition Isolation Switch
Item
1-2592-26-C
Description
Length
Price
SEBELT-C
Retractable Seat Belt
60 “
$99.95
BBLP-1204-417-C
Two Point Retractable Lap Belt with
Ignition Isolation Switch
60 “
$104.95
BBLP-1204-409-C
Anti-Cinch Comfort Seat belt
60 “
$104.95
1-2592-26-C
Anti-Cinch Comfort Seat belt with
Ignition Isolation Switch
60 “
$125.95
NEW!
Low Price
Keep unauthorized personnel from operating the lift truck.
The Electronic Code Switch can track up to 15 drivers,
preventing unauthorized vehicle use. If an accident occurs and
the vehicle is damaged, the last driver can easily be identified.
An alarm can also be programmed when maintenance is due.
Voltage Input
12-90VDC
Correct voltage level must be set with DIP-switches
on the rear of the ECS
OUTPUT
Relay contact rating: 6AMP continuous -10 (5 Sec.)
- for bigger loads, an external relay must be used
current use
10mA when relay is not activated, less than 60mA
in activated operation
Electronic Code Switch
$
SY31214-C . ...................................
14500
* Shipping extra unless otherwise stated.
30
* prices are subject to change without notice.
Safety Accessories
Safety Posters
Get a variety of posters that will promote safety in the workplace. Covering a
wide range of workplace hazards such as: eye protection, lockout/tagout
and pedestrian safety. These posters are perfect for the office or warehouse.
Highly visible at a size of 11” x 17” get your set today!
only
9995
$
Package Includes:
•Eye Protection (C) PEP
•Back Safety (C) PBS
•Forklift Safety (C)PMYPC
•Equipment Maintenance (C) PEM
•CO Poisoning (C)PCMP
•Slips, Trips, and Falls (C)PSTF
!
Safety Stickers every lift
truck should display
just
1495
$
•Housekeeping (C)PCWS
•Flammable (C)PFC
•Recognizing Hazards (C)PRH
• Lockout/Tagout (C)PLT
•Hygiene (C)PWHH
• Pedestrian Safety (C)PPFS
Lift Truck Safety
Stickers
Reduce the chance of accidents
by reminding the operator and
pedestrians simple safety rules that
protect them from injury or death.
These stickers are UV coated so they
will last for years and are perfect for
any industrial setting. All stickers seen
above are included.
Safety Posters (pkg. of 12)
$
PP-G..........................................................................................
99
95
16 Lift Truck
Safety Stickers
$
STCK-D......................
1495
Safety Posters (Single Posters)
$ 95
PP-1-G...........................................................................................
9
Forklift Safety Signs
as low as
1495
$
Keep your pedestrians and lift
truck operators aware of potentially
hazardous working environments
with these highly visible signs. Made of durable
polyethylene plastic, these signs are perfect for
the warehouse. Durable and water resistant.
Item
SHRN-D
SPED-D
SFKL-D
SPROP-D
SBAT-D
SSEC-D
SCHC-D
SSTP-D
Description
Caution, Stop Sound Horn
Caution Pedestrian Traffic
Caution Forklift Traffic
No Smoking Propane Changing
No Smoking Battery Changing
Caution Secure Trailer
Attention Chock Wheels
Stop Sign
Size
10 x 14”
10 x 14”
10 x 14”
10 x 14”
10 x 14”
10 x 14”
10 x 14”
18 x 18”
Price
$14.95
$14.95
$14.95
$14.95
$14.95
$14.95
$14.95
$24.95
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
31
Safety Accessories
35-436
35-138
Lift Truck Caddy
SY367000-A
Item not exactly as shown.
Keep all important items your
operators need to do their jobs
in one place. This caddy has
clipboard, pen with attached
string, tape gun holder and pen
holder. Installs in one minute with
no tools required.
as low as
3500
$
Back-Up Alarm
The most economical back-up alarms in the
industry. Choose from the standard model of
back-up alarms or from the new Smart Alarm
Technology which automatically adjusts the sound
level to 5dB(A) above the ambient noise. All backup alarms meet the specifications of SAEJ994b,
OSHA and all state requirements.
97 dB, 12/48V
35-436-C............................................... $3500
Smart Alarm - Self Adjusting
82 - 102dB 12/24V
35-113-B............................................... $6500
Smart Alarm - Self Adjusting
77 - 97dB 12/48V
35-103.................................................. $6300
Smart Alarm - Self Adjusting
82 - 102dB 12/48V
35-138............................................... $11700
Strobe Light
Warning light give high visibility both day and
night to employees working alongside the lift
trucks. Available in amber, blue, green
and white.
Low Profile
• Multi Voltage 12-72 VDC
• Mounting hardware included
• Available in red or amber
•2 Joule energy level potted power supply
for added protection
Rectangular Low Profile 12/72V
$
SY367000-A.......................................
5000
only
6595
$
•
•
•
•
Pen & Marker Holder
Tape Gun Holder
Clipboard
Pen w/ Plastic Cable
Lift Truck Caddy
$
LTCY-1-D..........................................
6595
Included
upgraded
dual
bracket
Rear Combination Light
Back-up, brake and signal light that attaches
to the lift truck.
* Not suitable for all lift trucks!
Head Lights
Also Available!
Proper illumination increases both safety and
visibility especially during loading or unloading of
trailers. Actual unit may not be exactly as shown.
Protect your light from damage
with this protective bracket
Combination Light 48V
$
56640-13300-71...............................
4400
Universal Head Light 12v
$
56510-22000-99...............................
2100
Protective Bracket
$
56504-22800-71...............................
4400
Headlight Bracket
$
56501-22800-71...............................
5600
* Shipping extra unless otherwise stated.
32
Fire Extinguisher
This fire extinguisher is designed specifically for
the lift truck. Can be mounted easily on any lift
truck for easy access. Has dual mounting bracket
for more secure installation. NAPA states: fire
extinguishes should be 30 feet from hazard. Available
for pick-up only.
Fire Extinguisher (includes bracket)
$
SF2.5A110-E......................................
3350
* prices are subject to change without notice.
Safety Accessories
Protection from the elements.
installation
is quick
& easy
fits almost
any lift
truck!
starting at
23900
$
Atrium Full Forklift Enclosure
•Durable vinyl plastic
• Maintains operator visibility
•Cold crack resistance of -100 F
•Great for windy conditions
•Secured by Velcro straps for easy
installation
•Fits almost any counterbalance lift truck
• Prevents cold air from entering
operator compartment
Standard
up to 6,000 lb.
$
ATR-1-G....................
23900
Large
6,000 -12,000 lb.
$
ATR-2-G....................
Made from durable impact resistant vinyl.
install on
Front, Top
or Back!
25500
Just
5995
$
protects
from
each!
rain or
snow!
Overhead Guard Rain Shields
This easy to install rain guard will protect your operators from rain or snow.
• Attaches in seconds
• Universal for forklift, utility & security carts
• SUPER CLEAR material
• Impact resistant vinyl
Solar Cap Canopy Protection
Forkshield Weather Guard
$
FSD01-D................................................................................
5995
•No more squinting while transporting an overhead load
•Get more coverage with a see-through visor
•Keep cool from overhead sun
• Made from durable anti-glare material
Forkshield (12 or more units)
$
FSD12-D................................................................................
4995
Solar Cap
$
SC1-D....................................................................................
5995
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
33
ergonomics
Treat Your Operators To the Ultimate in Comfort!
KAB 211 Mechanical Suspension
KAB 21/T1 Mechanical Suspension
• Low profile suspension seat
• Five position weight adjustment
• Seat tilt adjustment
• Back angle adjustment
• Weight adjustment 110-286 lbs.
• Low profile suspension
• Five position weight adjustment
• Back rest angle adjustment
• Five position lumbar support
• Weight adjustment 110-286 lbs.
820-40 PVC SEAT................... $805.00
820-45 FABRIC SEAT............. $805.00
820-50 BLACK FABRIC........ $1045.00
Hip guards - 820-47
820-47.................................... $235.00
Adjustable arm rests 3” (pair) - 820-48
820-48.................................... $263.00
820-52 PVC FABRIC............. $1045.00
Adjustable arm rests 2” (pair) - 830-31
830-31................................... $199.00
Turntable - 810-60
810-60................................... $252.00
PRIMO L MSG 75/521 AIR
SUSPENSION
•Easy adjusting, super smooth,
low profile suspension
•Features a 4” stroke to even out
the roughest jolts and shakes
•12V integral compression
•Asymmetrical shape makes driving
backward much more comfortable.
•Backrest angle adjustment:
+45º (forward) to -30º (recline)
•Adjustable lumbar support. Great for
sensitive lower backs.
•Heavy duty slide rails with 8.25” range
•Supports operators up to 300 lbs.
matrix cloth
1078703........................... $1159.00
black vinyl
1104725........................... $1097.00
tUrntable
only
25200
$
FOR SUPERIOR
COMFORT
Ultra S250 Mechanical Suspension
• Black Vinyl
• Heavy duty vinyl molded cushions
• Low profile mechanical spring suspension
• Three weight adjustments from 110-286 lbs.
• Fore and aft adjustment
• Adjustable back rest
870-40...................................$135.00
Adjustable arm rests (pair) – 870-30
870-30.................................... $55.00
Original Grammer Seat
• Two piece, cushion and backrest
• Full length polypropylene back support
• Heavy-duty vinyl
• Seamless molded
construction
• Stamped steel frame
• Scissor type suspension,
hydraulic shock absorber
• 9” for/aft adjustment
• Weight adjustment 110 - 285 lb.
• Backrest can be folded into the seat pan
Original Grammer
SY1960 (vinyl)................................ $15000
SY1965 (cloth)............................... $15000
* Shipping extra unless otherwise stated.
34
Michigan Seat
• Two piece, cushion and backrest
• Full length polypropylene back with
built-in manual holder
• Heavy-duty vinyl
• Seamless molded construction
• Durable steel frame
• Variable rate suspension
• Adjustable lumbar support
• Weight adjustments 100 - 270 lb.
• Backrest adjustments 5 to 15 degrees
Michigan Seat
SY1923 (vinyl)........................... $51500
SY1929 (cloth).......................... $56000
* prices are subject to change without notice.
ergonomics
Ergo Back-up Handle
Best
Seller
Reduce back strain with the Ergo Back-up Handle. Operators who are
required to travel frequently in reverse often grab the overhead guard.
This is a dangerous practice and has resulted in serious injuries.
OBUS FORME®
•Eases back stress when
turning around
•Fits any lift truck
•Installs in minutes
•Keeps operators hand inside
the operator compartment
•Optional horn switch
allows operator to keep left
hand on steering wheel
Reduce your chances of experiencing back
pain. OBUS FORME® goes the extra mile
to provide back and seat relaxation. OBUS
FORME® Driver’s Seats are designed with a
one-piece back and seat cushion to make the
ride in the Forklift more comfortable. Elastic
straps and hooks hold the cushions securely
in place.
Back-Up Handle
$
BUPH-1-D.............
Back-Up Handle w/
Horn Button
$
BUPH-2-D.............
4595
Back-Up Handle w/
Built-In Horn unit
Horn Unit
$
BUPH-3-D.............
Forklift Operator Comfort Cushion
OBUS21-C. . . . . . . . . . . . . . . . $2495
9995
5995
Driving a
forklift can be a $
pain IN the neck!
Just
Anti-vibration Seat Cushion
39
95
Hard shocks and vibrations can cause
back stress when operating lift trucks.
Shocks are absorbed by a dense foam
pad that gives the operator added
protection and comfort. Made of cambril
inner and vinyl outer covering with elastic
velcro straps.
each!
Drastically reduce neck strain
with the Nek-SavTM Neck Support System.
This clever unit drastically reduces neck strain caused by looking up for
prolonged periods of time. Great for lift truck operators or other personnel
who require a neck support system.
• Lightweight and comfortable
•Quick and easy to use
•Universal fit
•Designed and approved by doctors
7295
$
CUSH-C. . . . . . . . . . . . . . . . . . . . Neck Guard Support System
$
NSC3000-C.........................................
3995
Lift Mates
Obus Forme® Back Rests
Reduce the risk of long term back
strain or injury with Lift Mates
Lift a box with ease. The Solo-Lift or Dual-Lift allows
you to pick up small to mid-sized boxes with one
hand. Leaving your other hand free to open doors,
press elevator buttons or hold hand rails. Great
for the office or warehouse reduce the strain and
increase your productivity.
Lift Mates: Solo-Lift (reg. $49.95)
SOLO-D.........................................$2995
Lift Mates: Dual-Lift (reg. $59.95)
DUAL-D........................................$3995
Full Back Rest
Back rests that reduce the risk of lower
back strain. Select from the full back rest
or the half back rest to make lift truck
operation comfortable.
(Available in black only.)
Full Back Rest
$
FULBAC-C. . . . . . . . . . . . . . . . . . . 8995
Custom Air
Half Back Rest
Custom Air Half Back Rest
$
HLFB-C . . . . . . . . . . . . . . . . . . . . .
2995
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
35
facility protection
Protection for your facility to prevent costly damage.
13”
Bollard Posts and Machine Guards
Prevent costly
damage to
your facility
New Narrow
Column Protector
(fits 4’-6” coloums)
Column Protectors
Add protection to your facility and prevent damage to your
equipment. Bollard posts and machine guards can save
hundreds, even thousands of dollars in costs associated
facility damage. A must have for any warehouse or facility
that houses the operation of lift trucks.
Affordable protection for warehouse and factory columns and beams.
These HDPE protectors fit 6”, 8”, 10” and 12” round and square supports.
Two halves attach with easy to install straps. Columns come
in heights of 24 and 42”.
weight
price
42”h x 4.5”w
50 lbs.
$105.63
5” Square Bollard Post
42”h x 5”w
67 lbs.
$125.00
6” Round Bollard Post
42”h x 6.625”w
65 lbs.
$117.50
1744
4” Round Bollard Post
1754
1764
Item description
Column Protectors 6,8,10,12”
1706-B, 1708-B
$
1710-B, 1712-B ................
259
00
Corner Protectors
Narrow Column Protector 4” - 6”
$
95
1704 .................................
129
Machine Guards
size (hxw)
weight
price
52 lbs.
$156.25
24”h x 48”w
92 lbs.
$180.00
42”h x 48”w
112 lbs.
$208.75
1765
4” Low Profile Rack Guard
9”h x 36”w
1754
4” Machine Guard (low)
1769
4” Machine Guard (high)
*additional sizes are available - call for pricing
Wall Protectors
Bollard Post Sleeves
Great protection for your bollards is now available in 7
great colors! Multi-colored Post Sleeves (4”, 6” and 8”)
can be ordered in lime(L), orange(O), brown(B), green(G),
yellow(Y), white(W) and red(R). Ideal for parking areas,
near buildings and equipment.
HDPE Corner Protectors
deflect the impact, helping to
protect plant areas prone to
damage by fork truck, hand
truck, or personnel traffic.
Easily install
on overhead
door frames,
H-frame racking, factory
corners, use horizontally as
rack guards or on loading
docks. Sold in sets of two.
Bollard posts
size (hxw)
Item description
as low as
4800
$
Our wall protectors help prevent damage to
walls in areas with forklifts and hand trucks
or drum traffic. Each impact resistant panel
can be mounted end to end and features
unique energy absorbing construction.
Sold in sets of two. (Anchors not included)
ITEM#
Description
height
price
1732
4” Sleeve
56”
$50.00
1730-56
6” Sleeve
56”
$48.00
1730-72
6” Sleeve
72”
$55.00
ITEM#
Description
price
ITEM#
Description
price
1738-56
8” Sleeve
56”
$55.00
1720-C
Corner Protectors 21” pair
$65.00
1726-C
Wall Protector 6”
$85.00
1738-72
8” Sleeve
72”
$65.00
1725-C
Corner Protectors 21” pair
$95.00
1728-C
Wall Protector 8”
$95.00
* Shipping extra unless otherwise stated.
36
* Please indicate color by L, O, B, G, Y, W or R
* The 72” sleeves are only available in yellow
* prices are subject to change without notice.
Facility protection
All-Krete
Dries 3 times stronger than concrete
• Cures at room temp. in 15 minutes
• Cures BELOW ZERO in 1 hour
• Won’t shrink or peel back
• No heat systems or lamps required
• Use on dry or damp floors
• Excellent on expansion joints
• From 12” deep to feather-edging at 1/16”
• Eliminates costly shutdown time
• Permanent concrete repair
• Comes in 50 lb. pail, covers 60 sq. ft.
The flexible new system
that installs like tape
and outlasts any other
commonly used system
All-Krete: Concrete Repair
$
10-44-R-D. ...........................................................................
25000
Star Flex
A Permanent Expansion
Joint and Crack Compound
• Ready to pour, rubberized liquid
• No mixing or heating
• Use inside or outdoors
• Stays elastic, will not turn brittle
• Stops alligatoring
• Seals cracks up to 3/4” wide
• Highly elastic in “frozen” areas
• Designed for heavy traffic
• Prevents pavement ruptures
• One gallon of Crack Filler fills
approximately 75 lin. ft. of 1/2”
wide x 1/2” deep cracks
Star-Flex
$
11-19-RH-C................
22500
Non-Skid Floor Coating
The slip-proof coating for concrete, masonry,
metal and all other surfaces... prevents slips,
slides, falls.
INDOOR/
OUTDOOR
USE
Call for a
free sample!
install
Aisle striping
that lasts!
durastripe
with Ease!
1. Wash Surface
DuraStripe is a flexible new aisle striping
system that applies like tape, and outlasts
any other commonly used system.
2. Release backing
•Installs quickly and easily
•Eliminates the downtime associated with stripe painting
•Scuff resistant material requires little or no maintenance
•Backed by a 2 year warranty
•Stocked in various colours: yellow, red, green, blue, and orange
•DuraStripe is engineered for use in
dry, indoor environments at
temperatures above 500C
3. Cut to fit
4. ready to use
• Excellent sure footing even in wet areas,
stairways, loading docks, catwalks,
shower rooms
• Resistant to alkali, detergents, acids,
brake fluid, etc.
• Grey colour available only
• Apply to wood, concrete, steel, stone, etc.
Non-Skid Floor Coating
$
20-33C-C.............................................................................
19900
Item
size
dura2-e
2”x 100’
old list price
$185.00+
new list price
$111.00
dura3-e
3”x 100’
$191.00+
$138.00
dura4-e
4”x 100’
$198.00+
$166.00
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
37
facility protection
Pedestrian Guarding
Protect personnel and equipment both visually and physically with our pedestrian
guarding system. Choose between one, two, or three rail high systems.
Part
Part
Number
Weight
(lbs)
15” high for single rail
60-7500
26
$74.00
30” high for single or double rail
60-7502
41
$108.00
44” high for single, double or triple rail
60-7504
55
$131.00
6” x 6” x 3/16” x 44” high for single, double or triple rail
60-7522
65
$156.00
48” long rail
60-7506
35
$74.00
72” long rail
60-7508
54
$99.00
96” long rail
60-7510
72
$128.00
Description
Posts
4” x 4” x 1/4”
Std. Size
Rails
Price
(each)
60-7512
90
$154.00
Post Deflectors 42” high for 6” x 6” x 44” posts only
60-7518
24
$80.00
Post Caps
Black
60-7520
0.5
$6.50
Floor Anchors
1/2” x 4-1/2” Concrete Expansion Anchor
(4) required per post
60-7524
1
$4.30
120” long rail
Wire Mesh Pallet
Stronger than wood, cheaper than plastic!
Heavy duty 2” x 4” wire mesh pallet features a trio of 13 gauge stringers that run
the pallet’s full length. These pallets allow for condensed storage and shipment
due to a nesting design.
Galvanized after welding for extended life, the wire mesh eliminates fire hazard
and insect infestation of traditional wood pallets. Allows 4-way entry! 4,000 lb
static capacity, 2,500 lbs dynamic capacity (uniformly distributed loads).
Traditional wood pallets present problems such
as fire hazards and insect infestation...
Avoid these issues with wire mesh pallets!
Any standard pallet truck can enter from any side!
Size
Part #
Weight
1-20
48” x 40” x 4”
48” x 48” x 4”
NPR-4840-3
NRP-4848-3
45
50
$84.75
$94.25
Note: F.O.B. Chicago, IL
Collapsible Wire Mesh Containers
Mesh allows you to
SEE THE CONTENTS
at all times!
High visibility & ventilation for parts storage
The mesh design of these containers allow you
to view the contents without even opening them!
They feature a front-drop gate for easy access.
Electro-galvanized after welding for extended life,
they have a reinforced understructure and flared
legs. Units can be easily stacked up to 4” high
and when empty, they fold flat in seconds.
High-impact polypropylene casters (two swivel,
two locking) are optional.
Model
Usable WxDxH
Junior
Medium
Senior
Extra Large
(C) Caster
32” x 20” x 16”
40” x 32” x 28”
48” x 40” x 30”
48” x 40” x 36”
Part Number
Gauge
Available with
OPTIONAL CASTERS
for easy movement!
Mesh
Capacity
W-J-203222 (C)
11
1/2” x 1/2”
1,500 lbs
W-2-324034 (C)
2
2” x 2”
4,000 lbs
W-2-404836 (C)
2
2” x 2”
4,000 lbs
W-2-404842 (C)
2
2” x 2”
4,000 lbs
2”w x 4”h
Heights are without casters. Please include “C” after part number when ordering containers with casters.
Wt.
1-10
58 lbs
135 lbs
175 lbs
185 lbs
$92.00
$160.00
$211.00
$224.00
$100.00
Note: F.O.B. Chicago, IL
* Shipping extra unless otherwise stated.
38
* prices are subject to change without notice.
Facility protection
Know the tilt angle of your forks
at all times!
only
149!
$
safe-tilt: Tilt Mast Fork
Levelling System
installs in
less than
1 hour!
Speed Saver
NEW!!
Automatic Speed controller System
Are your Fork Lift drivers
going too fast?
Features
•Automatically controls the vehicle speed WITHOUT reducing performance
of hydraulics
for
•Installs on any gas, LPG or diesel
powered vehicle including those with
“fly by wire” throttles
Features
•Engine RPM is only controlled when vehicle is traveling OVER the preset
speed limit
TIlt mast
trucks!
The Safe-Tilt easily mounts on the
lift truck mast telling you the exact
position of the forks (park, level and
travel). The Safe-Tilt also comes
with sticker labels to specify
additional tilt angles.
With easy installation,
calibration and operation, the
Safe-Tilt is a must-have for any tilt
mast lift truck operator.
•Saves time with tilting
• Less product damage
•Increases safety
•Fits any tilt mast lift truck
•Neatly fits behind the mast
rail so it does not negatively
effect visibility
• Located at eye level so it is
easy for the operator to
quickly glance at fork level.
Safe-Tilt
$
SAFETLT-B........................................................................
14900
Column Guards
Two options for column protection
Rack Guards 8” High @ $33.60
16” High @ $43.60 (Over 4” inner width)
Speed Saver
Controller
•Has NO effect on performance of new
electronically controlled engine systems
Electronic “arm” actuator
Speed Saver
$
SS701-B................................................................................
165000
Each unit comes with: controller, gear tooth sensor, electronic “arm” actuator,
and throttle lever cable.
Protect-it™
Protect-it column guards are able to
accommodate every day knocks and bumps
yet robust enough to withstand substantial
forklift impact. Easy to install. No bolts or
screws needed.
NEW!!
Features
•Low purchase and installation costs.
•Securely grips the column with no
separate fasteners.
An economical way to protect
against damage to pallet racking
and wall corners. Easy to install
to concrete surface with four
bolts. Steel construction.
Safety yellow finish.
•Install as many or as few as required.
•Effective in cold stores as low
as -40 degrees.
•Available in recognized safety colors.
Part #
$
60-6400 Rail System Rack Guard 8”high.......................
$
60-6402 Rail System Rack Guard 16”high.....................
33
43
60
60
REC9280-C
REC9281-C
REC9282-C
REC9283-C
DESCRIPTION
PRICE
Column Guard 3¼” X 2” Black
Column Guard 3¼” X 2” Yellow
Column Guard 3” X 3” Yellow
Column Guard 3” X 3” Black
$19.95
$19.95
$19.95
$19.95
5
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
39
scales
Know the weight of your loads with lift truck scales.
Convenient and easy to use.
Weightroller Fork System
not legal for trade
no installation!
no Calibration!
of the lift truck capacity
Weighing System integrated into the forks of a lift truck
NO cabling, no installation --- just mount the forks
NO calibration, just “zero out” with 0 weight on forks
Fits Standard Class II or Class III Carriage
Maximum error only 0.1% of the load weight
Automatic and manual zero correction
Gross / Net weighing
Automatic tare and manual tare weight entry
Totalization with sequence numbering
Auto-switch off after pre-set number of non-use minutes
Left top fork houses digital display
30 hour battery life
Weighs in 5 lbs. increments, class II and 10 lbs. class III
Item
Description
WF-2-5
Weightroller Forks Class II
fork length
Price
45”
$6,185.00
WF-3-10
Weightroller Forks Class III
45”
$9,360.00
WF-sl-2
Special Length
60”-72”
$2,070.00
WF-sl-3
Special Length
60”-72”
$2,530.00
WF-BTW-F
Bluetooth Radio Plug-in
--
$115.00
WF-BTLP-3
3” Thermal Label Printer
--
$975.00
WF-BTRP-2
2” Thermal Receipt Printer
--
$835.00
WF-RBP
Replacement Battery
--
$350.00
Lift Chain Scale
not legal for trade
98 - 99%
accurate
• Load cells installed directly into lift chains
•98-99% Accurate - General Purpose
• Installs quickly, won’t reduce lift capacity
• Functions: accumulate, auto zero, tare
• Connects to printer (optional) or computer
Item
capacity
lsca-5-c
up to 5,000 lb.
$2,850.00
lsca-6-c
5,000 - 6,000 lb.
$3,260.00
lsca-9-c
9,000 - 11,000 lb.
$3,570.00
lsca-11-c
11,000 - 20,000 lb.
$4,000.00
lsca-20-c
20,000 - 60,000 lb.
$5,600.00
Price
optional feature!!!
Weight Printer
Weigh your loads and print them out for your records.
Mount it right on the truck for your convenience. For
item LSCA
Weight Printer
$
DATAC1014-C . ...................................
* Shipping extra unless otherwise stated.
40
+1 / -1%
accuracy
99.6%
accurate
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
Hydraulic Scale
670
00
Safe-Weigh: Lift Truck
Check Weigh System
The SAFE-WEIGH series on-board
weighing system is designed to give
high accuracy at a budget price. This
microprocessor based weight system is connected to the hydraulic
lifting system on lift trucks or similar
machines.
A load can be placed on the forks and
can be accurately weighed by measuring the hydraulic pressure. Designed
for heavy industrial use, the lift truck
can weigh a load in under 15 seconds.
This will ensure your shipments will
not exceed trailer capacity, waybills
match actual weight, lift truck capacity
is not exceeded, or material inventory
matches actual weight. Once you use
the SAFE-WEIGH, you will wonder
how you managed without it. The
SAFE-WEIGH is accurate to +/- 1% of
the lift truck capacity.
Features
•Stainless steel case and
transducer
•Easy to read, user friendly
•External on/off switch
•Selectable capacity and
division sizes
• kg. or lb. unit is selectable
•Capacity up to 99,999 lb.
• 1 year warranty
• 12 volts
Functions
not legal for trade
• Tare Weight (zero out
container weight)
• Total Weight (totals the weight
of many pallets)
• Over Weight Alarm if load
exceeds lift truck capacity
Safe-Weigh
$
SAWE-C................
2,15000
Economical Crane Scalet
This digital hanging scale offers fast and reliable weighing in a compact and
durable housing.
•High quality hook and Shackle included
•Rechargeable 6V battery
•AC/DC Power adapter
• Automatic shutoff
• Convertible gross/net weight display
Item
!
New
Description
Capacity
SC-06-C
Crane Scale
600 lbs
Price
$799.00
SC-2-C
Crane Scale
2,000 lbs
$870.00
SC-4-C
Crane Scale
4,000 lbs
$895.00
SC-6-C
Crane Scale
6,000 lbs
$966.00
Accuracy
at a great
Value
* prices are subject to change without notice.
Attachments
Brushes & magnetic sweepers ideal for all clean up applications.
Multi-Surface Magnett
IDEAL FOR ALL
CLEANUP
Versatile operation
APPLICATIONS
Broom works in either push or
pull mode.
Quick-Tite fork pockets
Simply attach to most forklifts.
Easy brush replacement
Features long lasting polypropylene
fixed brush sections.
Optional dust mop
Ideal for sweeping fine material on
polished floors.
•Broom height: 9”
•Bristle height: 8”
•Brush rows: 5
•Quick-Tite fork mount: Standard
(5” width)
•Brush sections: replaceable
polypropylene
•Broom mainframe: one-piece, solid aircraft aluminum extrusion
• Mounting hardware: high-quality
powder-coated steel
•Optional accessories: magnetic bar, dust mop
The Multi-Surface Magnet comes
with 7” wheels and a removable
handle for easy storage. The
optional rake loosens metal debris
from grass or gravel, allowing the
magnet to snap them up. Powerful
magnets are enclosed in a heavy
gauge aluminum shell. This magnet works well over
concrete, grass, gravel, etc.
• Snaps up hundreds of fasteners per sweeping
• Includes Load Release Feature
• Adjustable sweeping height: 3/4” to 1-1/2”
• Works over a variety of surfaces
• Optional rake attachment connects quickly to sweeper’s
mounting bracket using existing carriage bolt.
24” Multi-Surface Magnet
$
MSM24-A...................................................
37500
48” ValuSweep
$
VSWP-48-A.......................................
52900
60” ValuSweep
$
VSWP-60-A.........................
68500
30” Multi-Surface Magnet
$
MSM30-A...................................................
Replacement Brush 48”
$
VSWP-48-RB-A.................................
32500
Dust Mop Attachment 60”
$
VSWP-60-DM-A..................
38500
20900
36” Multi-Surface Magnet
$
MSM36-A...................................................
Replacement Brush 60”
$
VSWP-60-RB-A...................
41000
34500
48” Multi-Surface Magnet
$
MSM48-A...................................................
49900
Magnetic Sweepert
Fork Pockets
included!
Auto
Load-Release Magnetic Sweeper
stt r
es
B
Be
er
lle
l
l
e
e
S
S
Hang Magnetic Sweeper from vehicle
and sweep work area clean of all tire
damaging material!
48” AR Magnetic Sweeper
$
48AR-B.................................
Manual Brush Sweepert
By applying pressure to any of the attachment toe
plates, this unique design allows easy and safe
debris removal. A simple and effective operation,
debris is released from the hinged aluminum collector
plate at your convenience! Designed for light warehouse applications.
Quick and Easy !
36” AR Magnetic Sweeper
$
36AR-B.................................
The Most Economical
Magnetic Sweeper on
the Market!
• Up to 5” Ground Clearance
• Easy Operation,
• Maintenance Free, Great Performance
• For light applications - warehouse only
• Lifetime Guarantee on Magnetic Strength
• Fork Pockets included for Easy Installation
54950
60” Magnetic Sweeper
$
60AR-B...........................................
620
72” Magnetic Sweeper
$
72AR-B.........................................
50
69500
765
00
Create a cleaner
workplace while not
sacrificing worker
productivity because
this unit sweeps
faster and better
than four workers.
This time saving
push sweeper is
great for commercial
or industrial use.
The Jan-II is made
of heavy duty all
steel construction.
The non-slip drive
wheels allow for positive traction while
maintaining a quiet operation.
JAN-II Sweeper
$
JAN-II.........................................................
67500
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
41
Attachments
Great Forklift Attachments!
Fork Extensions
•
•
•
•
•
Handles large and odd
shaped loads
Tilt slide-on design
Fits up to 2” thick forks
Fork extension not to exceed 50% of existing fork length
Sold in pairs
Item
fork
width
max
inside
8448
4”
4.5”
wide
max
length thickness
48”
2”
$331.00
8454
8460
8463
8466
4”
4”
4”
4”
4.5”
4.5”
4.5”
4.5”
54”
60”
63”
66”
2”
2”
2”
2”
$354.00
$377.00
$383.00
$390.00
8472
4”
4.5”
72”
2”
$403.00
8484
8496
8548
8554
8560
8563
8566
8572
8584
8596
8648
8654
8660
8672
8684
8696
4”
4”
5”
5”
5”
5”
5”
5”
5”
5”
6”
6”
6”
6”
6”
6”
4.5”
4.5”
5.5”
5.5”
5.5”
5.5”
5.5”
5.5”
5.5”
5.5”
6.5”
6.5”
6.5”
6.5”
6.5”
6.5”
84”
96”
48”
54”
60”
63”
66”
72”
84”
96”
48”
54”
60”
72”
84”
96”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
$487.00
$560.00
$345.00
$372.00
$399.00
$403.00
$406.00
$422.00
$508.00
$590.00
$394.00
$406.00
$428.00
$458.00
$551.00
$635.00
Price
Round or Triangular Fork
Extensions
FORK
ALLOWS
EXTENSION
FORK WIDTH
WIDTH
ROUND EXTENSIONS
FE-4-54-R-B
FE-5-54-R-B
TRIANGULAR EXTENSIONS
FE-4-54-T-B
FE-5-54-T-B
LENGTH
MAX FORK
THICKNESS
net weight
Price
5”
6”
54”
54”
2”
2”
204 lbs.
216 lbs.
$685.00
$732.00
4”
5”
5”
6”
54”
54”
2”
2”
204 lbs.
216 lbs.
$685.00
$732.00
*more sizes available, please call for pricing 1-866-GO-LIFTOW(465-4386).
Carpet Poles and Rug Ramst
description
length
diameter
capacity
Price
CRP-108-B
Fork Mount-Inverted
108”
2.75”
2,500 lbs.
$1,560.00
CRP-120-B
Fork Mount-Inverted
120”
2.75”
2,200 lbs.
$1,750.00
CRP-144-B
Fork Mount-Inverted
144”
2.75”
1,800 lbs.
$1,795.00
Swivel Hooks
Item
Description
Size
Capacity
HOOK-4-B
Hook w/ Shackle
10” x 3.5”
4,000 lbs.
$60.00
HOOK-6-B
HOOK-10-B
Hook w/ Shackle
Hook w/ Shackle
10” x 4.75”
14.5” x 6.5”
6,000 lbs.
10,000 lbs.
$70.00
$170.00
* Shipping extra unless otherwise stated.
42
Item
description
pocket size
capacity
S-FORK-4-S-B
Single Fork Swivel
4-1/4” x 2-1/4”
3,000 lbs.
Price
$165.00
S-FORK-5-S-B
S-FORK-6-S-B
D-FORK-4-S-B
D-FORK-10-S-B
D-FORK-4-R-B
D-FORK-10-R-B
Single Fork Swivel
Single Fork Swivel
Double Fork Swivel
Double Fork Swivel
Double Fork Rigid
Double Fork Rigid
5-1/4” x 2-1/4”
6-1/4” x 2-1/4”
6-3/4” x 2-1/2”
8” x 3-3/4”
6-3/4” x 2-1/2”
8” x 3-3/4”
3,000 lbs.
3,000 lbs.
4,000 lbs.
10,000 lbs.
4,000 lbs.
10,000 lbs.
$174.00
$188.00
$325.00
$538.00
$315.00
$514.00
This chain activated pallet dumper/retainer
has finger-like retainers to hold the pallet in
place while dumping. This unit is
fork mounted, has a 2,000 lb.
capacity and is held in place by a
safety chain.
4”
5”
Item
The Hoisting Hook transforms any fork
truck into an overhead lifting hoist. Fork
openings are located on 13” centers.
A safety chain with snap hook is used
to secure this attachment to the trucks
carriage. This Hoisting Hook unit includes a heavy duty swivel
hook with safety clip.
Pallet Dumper/Retainert
Ideal for moving around large rolls of material.
Available in round or triangular style. To install insert
loop at the tip of the fork and slide it up at a 45°
angle then lay it down over the existing fork. OSHA
regulations require that extensions do not exceed the
length of the fork by more than 50%.
Item
Hoisting Hookst
Price
Pallet Dumper/Retainer
$
PAL-D/R-B.......................................................
1,05500
Fork Mounted Trash Can Dumpert
Save time and reduce work-related
injuries caused by lifting and
dumping heavy waste containers.
This innovative product will allow
a fork truck driver to lift and dump
refuse containers, weighing up to
1,000 lb., without ever leaving the
seat of the fork truck!
Only for use with 64 gallon trash can, model TH-64, or approved equal.
Fork pockets are 2-1/4” high by 7-1/4” wide usable. Steel construction for
years of dependable use.
New Low Price!
Fork Mounted Trash Can Dumper
$
FM-T-DUMP-A................................................
1,45000
64 Gallon Trash Can
$
TH-64-A...................................................................
9900
* prices are subject to change without notice.
Attachments
Protect your products from
denting, marring or other forms
of damage with Fork-Kushions
we’ve got a
variety of Forks
for you to
choose from.
Fork-Kushionst
ITA Fork
Item
Hook Class 2
FORK SIZE
(T x W x L)
STANDARD TAPER
1 1/4” x 4” x 36”
b2a36sd
1 1/4” x 4” x 42”
b2a42sd
1 1/4” x 4” x 48”
b2a48sd
1 1/2” x 4” x 36”
b2b36sd
1 1/2” x 4” x 42”
b2b42sd
1 1/2” x 4” x 48”
b2b48sd
1 1/2” x 5” x 36”
b2c36sd
1 1/2” x 5” x 42”
b2c42sd
1 1/2” x 5” x 48”
b2C48sd
FULL BOTTOM TAPER & POLISH
1 1/4” x 4” x 36”
b2a36TP
1 1/4” x 4” x 42”
b2a42TP
1 1/4” x 4” x 48”
b2a48TP
1 1/2” x 4” x 36”
b2b36TP
1 1/2” x 4” x 42”
b2b42TP
1 1/2” x 4” x 48”
b2b48TP
1 1/2” x 5” x 36”
b2c36TP
1 1/2” x 5” x 42”
b2c42TP
1 1/2” x 5” x 48”
b2c48TP
ITA Fork
Item
Hook Class 3
B3d42sd
B3d48sd
B3J42sd
B3J48sd
capacity
(lbs.)
Fork-Kushions offer a resilient yet
durable solution by equipping a
forklift truck with specially engineered
polyurethane bumpers that are mounted
to the upright of the fork. These highly
engineered bumpers provide cushioning
protection from marring, denting and
other forms of damage. The unique
structure offers excellent wear properties
and vibration deadening without compromising the load capacity.
Price
3,700
3,700
3,700
5,500
5,500
5,500
5,500
5,500
5,500
$408.00
$424.00
$446.00
$428.00
$456.00
$478.00
$476.00
$506.00
$528.00
3,700
3,700
3,700
5,500
5,500
5,500
5,500
5,500
5,500
$482.00
$500.00
$530.00
$514.00
$542.00
$566.00
$562.00
$594.00
$630.00
FORK SIZE
(T x W x L)
capacity
(lbs.)
Price
1 1/2” x 6” x 42”
1 1/2” x 6” x 48”
1 1/2” x 7” x 4 2”
1 1/2” x 7” x 48”
7,200
7,200
8,700
8,700
•Offer superior cushioning
•Have excellent wear properties
•Resistant to grease, oil and dirt
•Dramatically reduce product
damage
•Adaptable for all sizes of lift
truck forks
•Available in “Ultra-Soft”,
“Soft”, “Medium”, “Cut
Resistant” and “Maximum
Impact” for all load
requirements
$714.00
$748.00
$877.00
$929.00
Item
Larger sizes available please call for pricing
Fork Calipers
Did you know that a 10% wear reduction in fork thickness
results in a 20% reduction of capacity? These fork calipers
will tell you in seconds if the forks are worn beyond the safety
standards they were designed for.
Fork Calipers
$
686093..................................................................
1200
Lift Truck “Fork Caddy”t
Transport lift truck forks easily and safely with our lift truck
“Fork Caddy”. The “Fork Caddy” has easy-grip handles
and rolls smoothly on two swivel casters. A fork tine lock
secures the caddy onto the fork to keep it in place
while transporting. After transporting the fork to the
lift truck, rotate the handle 90° then slide the fork
onto the mast.
Description
Price
kpf-3410-SET-B
Ultra-Soft Black Kast-a-lite fork kushion w/ mounting brackets- 4”W x 24L”
$355.00
kpf-3510-SET-B
Ultra-Soft Black Kast-a-lite fork kushion w/ mounting brackets- 5”W x 24L”
$404.80
kpF-3420-SET-B
Soft Red Kast-a-lite fork kushion w/ mounting brackets- 4”W x 24L”
$378.00
kpf-3520-SET-B
Soft Red Kast-a-lite fork kushion w/ mounting brackets- 5”W x 24L”
$420.80
kpf-3440-SET-B
General Purpose Kast-a-lite fork kushion w/ mounting brackets- 4”W x 24L” $428.80
kpF-3540-SET-B
General Purpose Kast-a-lite fork kushion w/ mounting brackets- 5”W x 24L”
$491.20
kpfN-5447-SET-B
Cut resistant Kast-a-lite fork kushion w/ mounting brackets- 4”W x 24L”
$523.20
kpfN-5547-SET-B
Cut resistant Kast-a-lite fork kushion w/ mounting brackets- 5”W x 24L”
$577.60
KP-5447-SET-B
Maximum impact Kast-a-lite fork kushion w/ mounting brackets- 4”W x 24L”
$449.60
KP-5547-SET-B
Maximum impact Kast-a-lite fork kushion w/ mounting brackets- 4”W x 24L”
$506.80
Pallet Jockey for “Walkie”
Truckst
Allows electric walkie trucks to pick-up and
move 4-way pallets. Load more pallets into
a trailer with a standard pallet truck. Installs
in seconds, taken off in seconds.
Fork Caddy
$
FC-29-B..................................................................................
44000
Non-Adjustable (Raymond Crown Electric)
$
PJ-1005-B............................................................................
32500
Adjustable (Various Electric Walkie Trucks)
$
PJ-2001-B............................................................................
35000
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
43
Attachments
Quick and easy ... hydraulic attachments.
Save time by using the right
attachment for your application.
Carton Clamp
Designed for the
warehousing,
beverage, appliance
and electronics
industries. Carton
clamps allow pallet
less handling.
Drum Clamp Attachment
Drum clamps are widely used in the petroleum and
chemical industries and in other applications that
require the handling of standard 55-gallon drums.
Drum clamps can also help improve productivity by
handling up to four drums per load.
Double Load Handler
Paper Roll Clamp
Meeting the paper roll industry’s need for damage free
roll handling with maximum efficiency, Cascade offers
a full line of paper roll clamps and roll clamp damage
reduction options to handle paper rolls regardless of
diameter, weight or type of paper. Cascade’s rugged
paper roll clamps handle paper rolls of every size for
industries from stevedoring to printing.
Push/Pull Attachment
Allow you to ship, receive and warehouse unit
loads on inexpensive slip sheets rather than
pallets. Products typically handled with a push/
pull include bagged products such as seed,
agricultural products and cement; cased food,
electronics, cosmetics and bottled beverages.
Load Stabilizer Attachment
Designed for transporting unstable loads such as
soft drinks, malted beverages, bottled water and
empty containers, load stabilizers allow faster
operating speeds and more efficient handling
procedures by securing the palletized load. They
are particularly valuable in outdoor operations
and facilities with rough floors. E-Series Load
Stabilizers have a net capacity of 3,500 lb. and are available with a wide range
of pad sizes, arm configurations and backrest styles.
Layer Picker Attachment
Bale Clamp
Pallet less handling of nearly any type of baled
product such as cotton, wool, synthetic textiles
bales, corrugated boards, newsprint, rags, hay
and metal scrap bales translates into savings in
time and storage costs.
Fork Clamp Attachment
Operates both as a clamp and a fork
positioner. Awkward loads, such as crates,
bales & tires can be clamped between the
forks. The ability to position the forks speeds
up pallet handling and reduces wear and tear
on the pallets.
* Shipping extra unless otherwise stated.
44
Designed for the bottling, brewing, production or
warehouse/shipping industries, Cascade’s E-Series
Single-Double Pallet Handler allows single pallet
handling without protrusion outside the truck profile.
Spreading the forks hydraulically allows handling of
two pallets side by side. Side shifting provides added
flexibility for aligning forks or pallets in tight areas.
Beverage warehouses and distribution facilities
can benefit from the speed and versatility the
Layer Picker offers. When building mixed-load
pallets, the Cascade Layer Picker handles single
layers or multiple layers of both canned and
bottled products. Replace costly manual labor
with the versatile Cascade Layer Picker.
Rotator Attachment
Rotators add 360° revolving motion, in both
directions, to truck forks. Used in food processing
and manufacturing for inverting and dumping
loads.
* prices are subject to change without notice.
Lifting booms
Booms
Unique performance, convenience and safety features are built into every Lift Master Boom. Fabricated from structural steel with welding to meet
AWS creates a rugged and durable boom that will provide long term service. Telescopic units extend from 36" to 144" and come with an infinitely
adjustable locking screw. Standard fork pockets measure 7½"W x 2½"H on 24" centers. A 36" safety chain secures the boom to the forklift truck for
safe operation. Each unit includes two lifting hooks.
Orbiting Boomt
Econo Boomt
The Orbit Boom has a convenient
counterbalance system and drop
lock pin which provides a quick and
easy one-man operation and adjustment. This unit provides a horizontal
reach to 12 feet. Six vertical adjustment positions add between 2-1/2
and 8-1/2 feet of working height.
The telescopic section is secured in
place with a drop lock pin. Available
in non-telescopic design.
The Econo Boom telescopes extend from 80” to 144” extended. The telescopic
section of the boom is secured in place with an infinitely adjustable locking
screw. Fork pockets measure 7-1/2”W x 2-12”H on 24” centers. Overall size is
32”W x 11H. Non-telescopic style also available.
item
DESCRIPTION
PRICE
item
DESCRIPTION
PRICE
LM-EBT-B
Econo Boom Telescoping
$1,200.00
LM-OBT-B
Orbit Telescopic Boom
$1,660.00
LM-EBNT-B
LM-6
Econo Boom Non-Telescoping
6,000 LB. CAPACITY UPGRADE
$1,095.00
$350.00
LM-OBNT-B
LM-6
Orbit Non-Telescopic Boom
6,000 LB. CAPACITY UPGRADE
$1,515.00
$350.00
High Riser Boomt
The High Riser Boom adds five feet of lifting height to any fork truck.
The telescopic section of the boom is adjustable from 54” retracted
to 78” extended. The overall height of the boom is 70” and the overall width is 32”. The fork openings are 7-1/2” wide x 2-1/2 high on
24” centers. Available in non-telescopic design.
item
DESCRIPTION
Lift Master Boomt
Unique performance, convenience and safety features are incorporated into
the Lift Master Boom. Fabricated from structural steel with welding to meet
A.W.S. creates a rugged and durable boom that will provide long term
service. A 36” chain secures the boom to the fork truck for safe operation.
Each unit includes two lifting hooks.
PRICE
item
DESCRIPTION
PRICE
LM-HRT-B
High Rise Telescopic Boom
$1,860.00
LM-1T-B
Lift Master Telescopic Boom
$1,290.00
LM-HRNT-B
LM-6
High Rise Non-Telescopic Boom
6,000 LB. CAPACITY UPGRADE
$1,685.00
$350.00
LM-1NT-B
LM-6
Lift Master Non-Telescopic Boom
6,000 LB. CAPACITY UPGRADE
$1,185.00
$350.00
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
45
Drum Handling equipment
Drum Positionert
This innovative design allows a lift truck driver
to invert standing drums to a horizontal
racking position. Simply slide positioner
extensions over the vertical drum and with the
aid of the drum positioner, rotate the drum to
the horizontal position. Up to 800 lb. capacity.
Item
DRUM-P-30-A
DRUM-P-55-A
description
price
For 30 gallon steel drums
For 50 gallon steel drums
$1,350.00
$1,350.00
Drum Gripperst
Slip the fork tines into the fork tubes and
the Drum Gripper is ready to work.
Item
DGS-55-D*-A
DGD-55-D*-A
drum type
max inside
Fork pocket
centers
size (wxLxH)
(1) 55 Gallon Steel
(2) 55 Gallon Steel
800 lbs.
1,500 lbs.
13.5”
24.0”
28.25” x 24” x 8”
46” x 24.25” x 9.5”
Price
$550.00
$650.00
*D = deluxe fold-down model
Manual Drum Carrier/Rotator
t
• Tilt slide-on design
• Handle large and odd shaped loads
Drum Carrier/Rotator 800 lb. capacity
$
DCR-205-8-A............................................
Drum Carrier/Rotator 1,500 lb. capacity
$
DCR-205-15-A.....................................................................
Automatic Eagle Beak Drum Lifters
Multi-Purpose Drum Lifter/Wrencht
104500
1,18500
t
• Secure, move and release drums without
leaving the seat
of the lift truck
• Use with open and closed head drums
• Welded steel construction
• Simple and easy operation
Drum Lifter 1,000 lb. capacity
$
FMDL-1-A...........................................................................
1,21200
Dual Drum Lifter 2,000 lb. capacity
$
FMDL-2-A...........................................................................
1,56500
Fork Mounted Poly Drum Handlerst
This simple three-arm design is for use with closed head
30 and 55 gallon plastic, steel and fiber drums with a top
lip. Each removable arm also functions as a wrench for use
on drum plugs, faucets and ring bolts.
Deluxe Fork Mounted Drum Lifter
$
PDL-800-M-A...........................................................................
Ultra-Grip II™ - Model 6135t
Self-Powered Multi-Function Dual-Axis Drum Handler with General
Purpose Jaws
Valley Craft’s top-of-the-line
general purpose hydraulic
drum handler. Only Ultra-Grip II
allows the operator the choice of
controlled dumping to the left, right,
and forward. Rubber-lined general
purpose jaws are designed to
handle steel drums, and other rigid cylinders from 18” to 28” in diameter.
Deluxe Fork Mounted Drum Lifter
$
6135-A...............................................................................
• Plastic drum handler
• Accepts 30 and 55 gallon drums
• Secure to lift truck with chain and t-locks
19900
9,69500
Versa-Grip™ - Model 6139t
Bottom Drum Lifter 800 lb. capacity
$
FPDL-8-L-A...............................................................................
Top Drum Lifters 1,100 lb. capacity
$
FPDL-11-H-A.........................................................................
87900
108100
Designed primarily for handling steel drums of various sizes, the Self-Powered
Versa-Grip™ features both hydraulic gripping and dumping capabilities, and can
be used on almost any brand or style of lift truck because of its self-contained
built-in 12-volt battery operated Power Pak (see below). The rubber-lined general
purpose jaws can handle both steel drums and other rigid cylinders from 18” to
28” in diameter.
Deluxe Combination Fork Mounted
Drum Liftert
•35 & 50 Gallon Fibre
•Plastic or Steel
•Max size 28” x 49” x 31”
Deluxe Fork Mounted Drum Lifter
$
DFDL-3-A............................................................................
* Shipping extra unless otherwise stated.
46
1,54000
Deluxe Fork Mounted Drum Lifter
$
6139-A...............................................................................
6,33300
* prices are subject to change without notice.
Service carts/platform trucks/hand carts
Minimize lifting and reduce back strain with high quality hand carts.
ergonomic
D
handle!
weighs only
27 lb!
600 lb.
600
lb.
capacity
capacity
only
6225
$
only
9550
$
good
starting at
9600
$
better
Loop Handle Hand Truck
•Overall W x H: 14” x 47”
• 8” Solid Rubber Wheels
• 600 lb. Capacity
•Basket Style Back
• 1” - 16 Gauge Steel Tubing
• Painted Blue Enamel
•Weight: 27 lb.
Steel Hand Truck
$
ELB-8SR.......................................
6225
up to
800
lb.
capacity
best
D Handle Hand Truck
Heavy Duty Loop Handle Hand Truck
•Overall W x H: 14” x 51”
• 8” Solid Rubber Wheels
• 600 lb. Capacity
•Basket Style Back
• 1” - 16 Gauge Steel Tubing
• Painted Blue Enamel
•Weight: 30 lb.
Steel Hand Truck
$
DHB-8SR.....................................
9550
•Overall W x H: 14” x 47”
• 8” Cushion Rubber Wheels
• 8” Pneumatic Wheels (MLB-10PN Only)
• 600 and 800 lb. Capacity
•Basket Style Back
•Double Reinforced Toe Plate
• 1” - 14 Gauge Steel Tubing
• Painted Blue Enamel
•Weight: 28 lb.
Steel Hand Truck-600lbs
$
MLB-8C.......................................
Steel Hand Truck-800lbs
$
MLB-10PN...................................
9600
9720
Poly Products: HDPE high-visibility yellow, non-slip surface, ergonomic, lightweight
Portable Poly Dock Plate
Poly Curb Ramp
Hottest new product in dock equipment
save money, cut the weight!
36”L x 35”W x 5”H
27” L x 27” W x 4” H
Designed for use with two and four wheeled dollies, hand trucks, carts
and pallet trucks. Weighs 32 lbs., 4” height differential capability, 750 lb.
load capacity, beveled entry and exit edges, two carry handles, integrated
guardrails, and powder coated steel legs. 36”L x 35”W x 5”H. Compliance:
Meets OSHA 1910.30(a)
New Poly Curb Ramp for use with hand trucks or wheeled carts. Provides a
safe method to move heavy loads over curbs or up steps with ease. 1” side rails.
Excellent in all weather conditions, on curbs or steps up to 8” high. For durable
use with up to 1,000 lb. load. 9 lb. ramp has 2 handles with rounded edges
for easy pick-up, carrying and handling. Dimensions: 27” L x 27” W x 4” H
Portable Poly Dock plate
$
1795-C................................................................
Poly Curb Ramp
$
1794-C....................................................................
18000
7500
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
47
Service carts/platform trucks/hand carts
Select from steel or wood platform trucks
Strong, durable and suitable for all of your
warehousing applications
Heavy-Duty Steel/Wood Deck Platform Trucks
These heavy duty platform trucks are offered in a wide variety of sizes to satisfy the various needs. The 1 / ” tubular handle can be inserted at any end of the
platform. You may choose from a steel reinforced deck with 2” x 1” rectangular channels running along its length for added strength or varnished 3/4” thick hardwood.
Fitted with 2 swivel casters and 2 rigid casters, these platform trucks have a quality finish and allow you the choice of installing optional rubber bumpers
on the corners. Additional tubular handles are available.
hard wood deck
Steel Deck
item
size
1200 lb. capacity
5” blue casters
wt. lbs.
Price
1800 lb. capacity
6” rubber
wt. lbs.
Price
1
1800 lb. capacity
8” rubber
wt. lbs.
Price
2000 lb. capacity
6” phenolic
wt. lbs.
Price
4
2000 lb. capacity
6” resilex
wt. lbs.
Price
2000 lb. capacity
8” phenolic
wt. lbs.
Price
800 lb. capacity
8” pneumatic
wt. lbs.
Price
1310-A
24 x 36”
60
$193.58
80
$206.84
90
$211.97
80
$229.06
80
$324.79
90
$256.41
90
$271.79
1310-B
24 x 48”
70
$213.68
90
$223.93
100
$229.06
85
$246.15
90
$341.88
100
$271.79
100
$280.86
1310-C
30 x 48”
80
$239.32
100
$249.57
110
$254.70
95
$271.79
100
$384.62
110
$299.15
110
$308.04
1310-D
30 x 60”
95
$264.96
125
$271.79
135
$276.92
120
$299.15
125
$393.16
135
$307.69
135
$326.15
1310-E
36 x 72”
105
$329.07
145
$329.07
155
$338.46
140
$347.86
145
$470.80
155
$376.07
155
$398.63
1310-F
30 x 72”
100
$329.07
135
$329.07
145
$338.46
130
$347.86
135
$462.00
145
$376.07
145
$398.63
1315-A
24 x 36”
60
$319.66
80
$319.66
90
$329.07
80
$329.07
80
$394.88
90
$347.86
85
$413.68
1315-B
24 x 36”
70
$319.66
90
$319.66
100
$329.07
85
$329.07
90
$394.88
100
$347.86
95
$413.68
1315-C
30 x 48”
80
$357.27
100
$357.27
110
$394.88
95
$376.07
100
$423.08
110
$385.47
100
$451.29
1315-D
30 x 60”
95
$357.27
125
$357.27
135
$394.88
120
$376.07
125
$423.08
135
$394.88
125
$451.29
1315-E
36 x 72”
--
--
145
$498.30
155
$582.91
140
$498.30
145
$611.12
155
$582.91
145
$658.12
1315 -F
30 x 72”
--
--
135
$498.30
145
$582.91
130
$498.30
135
$611.12
145
$582.91
135
$658.12
*Please specify caster type and capacity when ordering.
From a shelf cart to
a platform truck in a
few easy steps!
Convertible Truck
The convertible truck turns into a platform
truck with virtually no effort and strain.
Simply remove the one-piece top shelf,
along with the four durable steel support
posts, and you’re ready to go.
* Shipping extra unless otherwise stated.
48
The 1,000 lb. capacity Utility Truck comes
equipped with a clipboard shelf that can be
folded down when not needed. Ideal for narrow
aisle situations, this truck can fit in tight spaces.
Built with 5” rubber casters and protective
rubber bumpers on the front corners.
only
31795
$
Utility Truck
Features
•Durable steel with blue
coat finish
•Converts to platform truck
easily. No tools needed!
•Comes with sturdy rubber
5” casters
• Protective bumpers
included!
item
dimensions
(W” x L” x H”)
capacity
(lbs)
Price
1520
18 x 47 x 37
1,000
$340.17
Wagon Style Platform Truck
The handle of this platform truck is linked to a front wheel
directional system making it easy to maneuver. Its 10” pneumatic
wheels roll smoothly and easily on any surface. 1,000 lb. carrying
capacity. Choose from a wood or steel deck.
This versatile truck is built to last with a
durable blue coat finish. Comes with 5”
rubber casters and rubber bumpers are
included on the front corners.
item
dimensions
Price
1335-A
24”W x 48”L (Steel)
$495.73
1335-B
30”W x 60”L (Steel)
$564.10
1335-C
36”W x 72”L (Steel)
$692.31
1335-D
24”W x 48”L (Wood)
$555.56
item
dimensions
(W” x L” x H”)
capacity
(lbs)
Price
1335-E
30”W x 60”L (Wood)
$649.56
1510
24 x 36 x 41
1,000
$317.95
1335-F
36”W x 72”L (Wood)
$837.61
* prices are subject to change without notice.
Service carts/platform trucks/hand carts
Carts and trucks for all your material handling needs.
Shelf Trucks
These 800 to 1,200 lb. capacity trucks are essential to transport
boxes, books and parts of all kinds. Built with a handle and durable
blue coat finish that makes them a favorite in hospitals, schools,
libraries, stores, warehouses, etc. Choose 5” blue or
8” pneumatic wheels.
5-shelf 4-shelf 3-shelf
models
models
models
heavy duty 2-shelf
mdels
item
description
wt.
(lbs.)
Sheet & Panel Trucks
If you need to move large, bulky sheets of materials, such as drywall,
plywood, paneling or sheets of metal, you need the heavy duty A-Frame
Cart. A convenient parts tray is included in between the a-frame uprights.
Unit is easily secured by using the foot operated caster lock. Four 6"
rubber casters included. All steel construction with a durable blue powder
coat finish. Unit ships knocked down. Assembly required.
5” blue
8” pneumatic
1015-A
2-Shelf Truck 18 x 24 x 36
55
$213.68
--
1015-A-D
2-Shelf Truck 18 x 24 shelf down
55
$213.68
--
titled platform truck
model
1015-B
2-Shelf Truck 18 x 30 x 36
60
$201.71
--
item
wt. (lbs.)
6” rubber
1015-B-D
2-Shelf Truck 18 x 30 shelf down
60
$206.84
--
1450-A
Lumber cart 24 x 48
75
$341.88
1015-C
2 Shelf Truck 24 x 36 x 36
70
$218.80
$264.96
1450-B
Lumber cart 30 x 48
50
$418.80
1015-C-D
2-Shelf Truck 24 x 36 shelf down
70
$222.22
--
1450-C
Lumber cart 30 x 60
100
$452.99
1015-F
2-Shelf Truck 24 x 48 x 36
85
$244.44
$326.15
description
1020-A
3-Shelf Truck 18 x 24 x 36
65
$247.86
--
1020-B
3-Shelf Truck 18 x 30 x 36
70
$218.80
--
1020-B-D
3-Shelf Truck 18 x 30 shelf down
70
$232.48
--
1020-C
3-Shelf Truck 24 x 36 x 36
80
$246.15
$324.79
wt. (lbs.)
6” rubber
1020-C-D
3-Shelf Truck 24 x 36 shelf down
80
$254.70
--
1454-A
Lumber cart 24 x 36
70
$282.05
1020-F
3-Shelf Truck 24 x 48 x 36
105
$275.21
--
1454-B
Lumber cart 24 x 48
75
$300.85
1025-F
4-Shelf Truck 24 x 36 x 51
135
$362.39
--
1454-C
Lumber cart 30 x 48
95
$300.85
1025-C
4-Shelf Truck 24 x 48 x 51
165
$376.07
--
1454-D
Lumber cart 30 x 60
110
$341.88
1030-F
5-Shelf Truck 24 x 36 x 65
155
$413.67
--
1454-E
Lumber cart 36 x 72
125
$353.85
1025-C
5-Shelf Truck 24 x 48 x 65
175
$410.26
--
a-shaped support
model
item
description
1450
1020
1025
1015
1615
Stock Picking Trucks
Two units in one, a ladder and truck,
to pick and transport out of reach
merchandise quickly and efficiently.
Spring loaded step-lock system, holds the
truck in place when weight of user is put
on steps. Non-slip steps. Comes with 5”
1605
rubber casters. 1000 lb. capacity.
1454
Order Picking Truck
Facilitates picking and
stocking tasks efficiently.
The tilted list order clip
on this truck permits an
easier listing of data.
All welded construction.
Overall height with
casters is 36”.
1041
item
no. of
steps
dimensions
(W” x L” x H”)
description
wt. (lbs.)
5” blue
1605
5
20 x 48 x 78”
13”
155
$538.00
1041-A
2-Shelf Order-Picking trk. 18 x 30
75
$264.96
1610
3
20 x 48 x 55”
13”
135
$444.00
1041-B
2-Shelf Order-Picking trk. 24 x 36
85
$278.63
1615
5
20 x 48 x 78”
26”
145
$538.00
1041-D
3-Shelf Order-Picking trk. 18 x 30
70
$300.85
1041-E
3-Shelf Order-Picking trk. 24 x 36
75
$307.95
space
betw’n weight
shelves (lbs)
Price
item
1610
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
49
work platforms/ladders
Mobile Safety Ladder Stands
• No handrail
• 15” platform depth
• 1” x 16 ga. round tubing construction
• 3” swivel spring load casters
• 24” wide x 7.5” deep non-slip
perforated step material
• 26” overall width
• 300 lb. capacity
• Painted blue enamel
Item
steps
platform
height
step
width
base size
weight
size
1NH*
2NH*
3NH*
4NH*
5NH*
1
2
3
4
5
9”
18”
27”
36”
45”
24”
24”
24”
24”
24”
26” x 19”
26” x 24.5”
26” x 29.5”
26” x 32.5”
26” x 38”
30 lbs.
40 lbs.
53 lbs.
62 lbs.
95 lbs.
26” x 20” 10”
26” x 20” 18”
26” x 23” 27”
26” x 30” 36”
26” x 37” 45”
Stay safe when working
in high places with work
platforms
Price
Recommended for use with
a safety harness and lanyard
for protection in the event
of a fall. Please see page 28
for Liftow’s selection of fall
arrest equipment.
$152.50
$166.00
$176.15
$200.50
$226.70
* Standard with 3” swivel spring loaded casters (others have positive floor locking trip step mechanism).
Options: Front or side walk through • Extended platforms • Aluminum or Stainless Steel construction.
Model higher than 16 steps available - call for details and pricing.
Mobile Safety Ladder
Stands w/ 42” Handrail
• 42” high handrail
• 15” deep platform
• 1” x 16 ga. round tubing construction
• 6” x 2” polyolefin rear wheels
• 5” x 1.25” RSX rubber swivel casters
• Positive floor locking trip step mechanism
• 24” wide x 7.5” deep non-slip
perforated step material
• 33” overall width
• 300 lb. capacity
• Painted blue enamel
Meets or exceeds CSA Safety Standards
as per ANSI A14.7 and OSHA 1910.27
steps
platform
height
step
width
base size
weight
size
Price
1H*
1
9”
24”
26” x 19”
32 lbs.
26” x 20” 52”
$188.50
2H*
2
18”
24”
26” x 24.5”
42 lbs.
26” x 20” 60”
$213.85
3H*
3
27”
24”
26” x 29.5”
55 lbs.
26” x 23” 69”
$253.63
4H
4
36”
24”
33” x 34.5”
87 lbs.
33” x 30” 78”
$288.90
5H
5
45”
24”
33” x 40”
97 lbs.
33” x 44” 96”
$328.70
6H
6
54”
24”
33” x 45.25”
111 lbs.
33” x 44” 108”
$340.70
7H
7
63”
24”
33” x 50.5”
122 lbs.
33” x 51” 120”
$475.50
8H
8
72”
28”
36” x 55.75”
142 lbs.
36” x 30” 126”
$674.00
9H
9
81”
28”
36” x 61”
154 lbs.
36” x 30” 132”
$698.50
10H
10
90”
28”
36” x 66.25”
166 lbs.
36” x 30” 144”
$762.00
11H
11
99”
28”
36” x 71.5”
178 lbs.
36” x 30” 156”
$835.00
12H
12
108”
28”
36” x 76.33”
190 lbs.
36” x 30” 168”
$857.00
13H
13
117”
28”
36” x 82”
202 lbs.
36” x 30” 180”
$935.00
14H
14
126”
28”
36” x 87.25”
214 lbs.
36” x 30” 186”
$1002.45
15H
15
135”
28”
36” x 92.5”
226 lbs.
36” x 30” 198”
$1039.00
16H
16
144”
28”
36” x 97.75”
238 lbs.
36” x 30” 204”
$1078.00
Item
* Standard with 3” swivel spring loaded casters (others have positive floor locking trip step mechanism)
Options: Front or side walk through • Extended platforms • Aluminum or Stainless Steel construction
Model higher than 16 steps available - call for details and pricing
* Shipping extra unless otherwise stated.
50
Work Platform
Constructed from durable welded steel, these work platforms are ideal for
all types of overhead maintenance, repair or merchandise handling. With its
durable blue coat finish, this platform is built to resist chips and scrapes to keep it
looking newer longer.
ITEM
DESCRIPTION
WP-3636-B
Standard Work Platform 36” x 36” No Casters
CAPACITY
800 lb
PRICE
$698.54
WP-3636-5RSX
Standard Work Platform 36” x 36” 5” Rubber Casters
800 lb.
$768.40
WP-4848
Standard Work Platform 48” x 48” No Casters
800 lb.
$1087.37
WP-4848-5RSX
Standard Work Platform 48” x 48” 5” Rubber Casters
800 lb
$1150.25
* prices are subject to change without notice.
steel Hoppers & containers
Self-Dumping Hoppers
The efficient bulk material transportation
Easy to stack design
Offered in 3 steel gauges and 9
different capacities
Unique rocker design system
provides efficient full cycle
Spring loaded latch mechanism
complete with safety chain
Heavy duty 7-gauge base
standard on all models
Standard Forklift pockets
Select from 3 steel gauges, medium duty, heavy duty, or
super heavy duty.
Item
Description
Weight
(lbs.)
Price
medium duty
10 Gauge
2005-A
1/4 cu yd, 10 gauge steel
400
$864.96
2010-A
1/2 cu yd, 10 gauge steel
440
$1094.02
2015-A
3/4 cu yd, 10 gauge steel
455
$1170.00
2020-A
1 cu yd, 10 gauge steel
500
$1297.43
2025-A
1.5 cu yd, 10 gauge steel
565
$1484.13
2030-A
2 cu yd, 10 gauge steel
600
$1666.67
2035-A
3 cu yd, 10 gauge steel
700
$2290.60
2040-A
4 cu yd, 10 gauge steel
830
$2731.62
2050-A
5 cu yd, 10 gauge steel
960
$2897.43
2005-B
1/4 cu yd, 3/16” steel
500
$974.36
2010-B
1/2 cu yd, 3/16” steel
595
$1239.32
2015-B
3/4 cu yd, 3/16” steel
640
$1333.33
2020-B
1 cu yd, 3/16” steel
675
$1461.54
2025-B
1.5 cu yd, 3/16” steel
770
$1658.12
item
Description
2030-B
2 cu yd, 3/16” steel
825
$1829.06
2131
6” rubber caster set for hoppers
$111.12
2035-B
3 cu yd, 3/16” steel
955
$2555.55
2133
6” phenolic caster set for hoppers
$136.76
2040-B
4 cu yd, 3/16” steel
1155
$3017.09
2135
8” rubber caster set for hoppers
$136.76
2050-B
5 cu yd, 3/16” gauge steel
1355
$3401.71
2137
8” phenolic caster set for hoppers
$162.40
2136
8” cast iron caster set for hoppers
$362.40
7 Gauge (3/16)
1/4 Steel
super heavy duty
These hoppers are designed to dump
entire loads when unlatched and will
automatically return to its upright
position when empty, latch fully secured.
The unique rocker system offers a
more efficient unloading through added
momentum in forward tilt and will provide
years of trouble free use. May be fitted
with optional casters for added mobility.
Comes standard with forklift pockets
for safe transportation and unloading
with forklift trucks with 3 different steel
gauges to meet your requirements.
heavy duty
Self-dumping Hopper
2005-C
1/4 cu yd, 1/4” steel
600
2010-C
1/2 cu yd, 1/4” steel
795
$1353.84
2015-C
3/4 cu yd, 1/4” steel
850
$1,521.37
Caster Sets for Hoppers
Choose from a full range of accessories. Casters or
wheels to complete your hopper purchase.
price
$1044.44
2020-C
1 cu yd, 1/4” steel
900
$1692.31
2025-C
1.5 cu yd, 1/4” steel
1030
$1876.92
2030-C
2 cu yd, 1/4” steel
1100
$2094.02
2035-C
3 cu yd, 1/4” steel
1270
$2931.62
2040-C
4 cu yd, 1/4” steel
1380
$3415.38
2050-C
5 cu yd, 1/4” steel
1510
$3888.89
Self Dumper Hopper Lids
$
2070-D. . . . . . . . . . . . . . . . . . . . . . .
47009
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
51
Dock Accessories/equipment
How to select dockplates
and dockboards
2-wheel handtruck
4-wheel platform truck
Pallet truck
Forklift truck
Four easy steps to follow:
3. Establish axle load capacity:
Calculate axle load capacity from total weight
of material handling equipment and its maximum
load carrying capacity, as follows:
1. Determine Maximum Height Difference:
2-wheel handtruck
100% of total weight
4-wheel platform truck
50% of total weight
Hand pallet truck
60% of total weight
Powered pallet truck
67% of total weight
Counter-balanced forklift truck90% of total weight
For the worst case, measure the height of the truck floor above or below the dock
level (see diagram below).
4. Choose model to satisfy above requirements.
2. Select Width:
As a general rule, add 18”/45.7 cm to overall width of your material handling equipment. Typical dockplate or dockboard widths for standard equipment are as follows:
Aluminum Truck
Dock Plate
• Durable lightweight,
aluminum alloy
•Bevelled edges on top and bottom
•Non-slip tread surface
•Highly visible orange edges
•10o arch at the top to allow board/plate to lie flat
•Steel legs fit between truck
and board/plate to prevent
movement during use
•Equipped with safety curbs to
strengthen the board and prevent
equipment run off
Light Duty
Standard Duty
Heavy Duty
Size (WxL)
Inches
item
Axle
Load
Price
item
Axle Load
Price
item
Axle
Load
Price
36 X 48
7
AL3648
700
$321.00
A3648
1,700
$425.00
AHD3648
3,000
$552.00
42 X 48
7
AL4248
800
$364.00
A4248
2,000
$484.00
AHD4248
3,500
$631.00
48 X 24
3
AL4824
1,800
$236.00
A4824
4,500
$304.00
AHD4824
8,000
$395.00
48 X 30
4
AL4830
1,450
$278.00
A4830
3,600
$364.00
AHD4830
6,400
$474.00
48 X 36
5
AL4836
1,250
$321.00
A4836
3,000
$424.00
AHD4836
5,400
$552.00
48 X 42
6
AL4842
1,050
$364.00
A4842
2,600
$484.00
AHD4842
4,600
$631.00
48 X 48
7
AL4848
900
$407.00
A4848
2,200
$545.00
AHD4848
4,000
$709.00
48 X 54
8
AL4854
760
$455.00
A4854
1,700
$610.00
AHD4854
3,300
$792.00
48 X 60
9
AL4860
600
$506.00
A4860
1,500
$683.00
AHD4860
2,700
$897.00
48 X 72
11
AL4872
400
$607.00
A4872
1,100
$817.00
AHD4872
2,000
$1,055.00
60 X 24
3
AL6024
2,200
$286.00
A6024
5,600
$373.00
AHD6024
10,000
$464.00
60 X 30
4
AL6030
1,800
$341.00
A6030
4,200
$465.00
AHD6030
8,000
$581.00
60 X 36
5
AL6036
1,500
$395.00
A6036
3,700
$524.00
AHD6036
6,700
$661.00
60 X 42
6
AL6042
1,300
$449.00
A6042
3,200
$600.00
AHD6042
5,800
$760.00
60 X 48
7
AL6048
1,100
$502.00
A6048
2,800
$679.00
AHD6048
5,000
$893.00
60 X 60
9
AL6060
880
$628.00
A6060
2,200
$844.00
AHD6060
3,800
$1,099.00
72 X 24
3
AL7224
2,600
$340.00
A7224
6,700
$441.00
AHD7224
12,000
$561.00
72 X 30
4
AL7230
1,950
$403.00
A7230
5,400
$532.00
AHD7230
9,500
$679.00
72 X 36
5
AL7236
1,650
$473.00
A7236
4,500
$628.00
AHD7236
8,000
$805.00
72 X 42
6
--
--
--
A7242
3,800
$718.00
AHD7242
6,850
$923.00
For applications where the shipping/receiving dock is
much higher than the truck floor or trailer bed. These
wheel risers will raise the truck floor or trailer bed to dock
level, and facilitate ease of loading and unloading.
52
To select dockplates or dockboards for use with walkie stackers or other material
handling equipment with low underclearance, please consult dealer or manufacturer
to avoid “hang up’s”.
Maximum
Height
Difference
Inches
Aluminum Wheel Risers
* Shipping extra unless otherwise stated.
36” /91 cm
48” /122 cm
48” /122 cm
60” /152 cm
height overall Deck
(in.)
length length
item
18” wide
net wt. PER
PAIR (lbs.)
Price
$945.00
6
42
24
AWR25-1845-6
102
24” wide
net wt. PER
PAIR (lbs.)
Price
AWR25-2445-6
124
$1,133.00
item
8
52
24
AWR25-1852-8
122
$1,123.00 AWR25-2452-8
150
$1,324.00
10
59
24
AWR25-1859-10
150
$1,311.00 AWR25-2459-10
178
$1,526.00
12
66
24
AWR25-1866-12
180
$1,523.00 AWR25-2466-12
210
$1,749.00
6
57
36
AWR25-1857-6
133
$1,167.00 AWR25-2457-6
164
$1,394.00
8
64
36
AWR25-1864-8
157
$1,362.00 AWR25-2464-8
194
$1,576.00
10
71
36
AWR25-1871-10
189
$1,567.00 AWR25-2471-10
226
$1,793.00
12
78
36
AWR25-1878-12
222
$1,808.00 AWR25-2478-12
263
$2,068.00
6
69
48
AWR25-1869-6
164
$1,401.00 AWR25-2469-6
204
$1,631.00
8
76
48
AWR25-1876-8
192
$1,591.00 AWR25-2476-8
238
$1,850.00
10
83
48
AWR25-1883-10
228
$1,865.00 AWR25-2483-10
274
$2,096.00
12
90
48
AWR25-1890-12
264
$2,092.00 AWR25-2490-12
316
$2,324.00
* prices are subject to change without notice.
Dock Accessories/equipment
Aluminum Truck Dock Board
FLHL Forklift Handles. ...........
$
9900
Recommended for dockboards weighing over 140
lb./63 kg
19300
$
00
Fixed Span Locks. .......... 94
ASL Adjustable Span Locks. .
FSL
$
For counterbalanced forklift trucks, axle
load is 90% of the total weight. For
powered pallet trucks, axle load is 67% of
the total weight.
10,000 - 20,000 lbs.
Maximum
Height
Difference
Model
Axle
Inches
Number
Load
Price
Size
(WxL)
Inches
54 x 60
9
A4-5460
4,000
$1,003.00
66 x 60
9
A10-6660
10,000
$1,506.00
54 X 72
11
A4-5472
4,000
$1,140.00
66 x 72
11
A10-6672
10,000
$1,760.00
60 x 60
9
A4-6060
4,000
$1,072.00
72 x 48
7
A10-7248
10,000
$1,294.00
60 x 72
11
A4-6072
4,000
$1,222.00
72 x 60
9
A10-7260
10,000
$1,596.00
54 x 48
7
A6-5448
6,000
$867.00
72 x 72
11
A10-7272
10,000
$1,883.00
54 x 60
9
A6-5460
6,000
$1,011.00
72 x 84
13
A10-7284
10,000
$2,128.00
54 x 72
11
A6-5472
6,000
$1,215.00
60 x 36
5
A12-6036
12,000
$895.00
60 x 48
7
A6-6048
6,000
$921.00
60 x 48
7
A12-6048
12,000
$1,094.00
60 x 72
11
A6-6072
6,000
$1,233.00
60 x 60
9
A12-6060
12,000
$1,424.00
66 x 36
5
A6-6636
6,000
$811.00
72 x 36
5
A12-7236
12,000
$1,002.00
66 x 48
7
A6-6648
6,000
$976.00
72 x 48
7
A12-7248
12,000
$1,302.00
66 x 60
9
A6-6660
6,000
$1,149.00
72 x 84
13
A12-7284
12,000
$2,128.00
72 x 48
7
A6-7248
6,000
$1030.00
60 x 36
5
A14-6036
14,000
$900.00
54 x 36
5
A8-5436
8,000
$728.00
60 x 48
7
A14-6048
14,000
$1,229.00
54 x 48
7
A8-5448
8,000
$873.00
60 x 60
9
A14-6060
14,000
$1,435.00
54 x 60
9
A8-5460
8,000
$1020.00
60 x 72
11
A14-6072
14,000
$1,680.00
54 x 72
11
A8-5472
8,000
$1,289.00
66 x 36
5
A14-6636
14,000
$954.00
60 x 36
5
A8-6036
8,000
$770.00
66 x 48
7
A14-6648
14,000
$1,302.00
60 x 48
7
A8-6048
8,000
$928.00
66 x 60
9
A14-6660
14,000
$1,524.00
60 x 60
9
A8-6060
8,000
$1,080.00
66 x 72
11
A14-6672
14,000
$1,788.00
60 x 72
11
A8-6072
8,000
$1,371.00
72 x 36
5
A14-7236
14,000
$1,007.00
72 x 30
4
A8-7230
8,000
$769.00
72 x 48
7
A14-7248
14,000
$1,372.00
72 x 36
5
A8-7236
8,000
$852.00
72 x 60
9
A14-7260
14,000
$1,603.00
72 x 48
7
A8-7248
8,000
$1,037.00
72 x 72
11
A14-7272
14,000
$1,895.00
72 x 60
9
A8-7260
8,000
$1,282.00
72 x 84
13
A14-7284
14,000
$2,143.00
72 x 72
11
A8-7272
8,000
$1,536.00
72 x 60
9
A16-7260
16,000
$2,073.00
72 x 84
13
A8-7284
8,000
$1,718.00
72 x 72
11
A16-7272
16,000
$2,472.00
54 x 36
5
A10-5436
10,000
$842.00
72 x 84
13
A16-7284
16,000
$2,875.00
54 x 48
7
A10-5448
10,000
$1,023.00
72 x 36
5
A18-7236
18,000
$1,290.00
54 x 60
9
A10-5460
10,000
$1,336.00
72 x 36
5
A20-7236
20,000
$1,295.00
54 x 72
11
A10-5472
10,000
$1,513.00
72 x 48
7
A20-7248
20,000
$1,751.00
60 x 60
9
A10-6060
10,000
$1,352.00
72 x 60
9
A20-7260
20,000
$2,083.00
60 x 72
11
A10-6072
10,000
$1,621.00
72 x 72
11
A20-7272
20,000
$2,484.00
66 x 36
5
A10-6636
10,000
$948.00
72 x 84
13
A20-7284
20,000
$2,890.00
66 x 48
7
A10-6648
10,000
$1,230.00
--
--
--
--
Size (WxL)
Inches
Dock Board Optional Parts
4,000 - 10,000 lbs.
Maximum
Height
Difference
Model
Inches
Number
Axle
Load
Price
--
The Edge-O-Dock Levelert $1,35500
starting at
The Edge-O-Dock permanently
attaches to the face of your
dock, providing immediate use while saving valuable floor space.
Item
FM-2066
FM-2072
FM-2566
FM-2566
Capacity
Ramping
Width
oVERALL
wIDTH
Price
20,000 lbs
20,000 lbs
25,000 lbs
25,000 lbs
66”
72”
66”
72”
92”
98”
92”
98”
$1,355.00
$1,475.00
$1,510.00
$1,590.00
• Easy installation to any loading dock with a steel dock edge
• Working range of 5” above or below to service a variety of
truck heights
• Mechanical operation
• Rubber Bumpers: 8” W x 18” H x 2” D
• Service range up to 5” above and below dock
• Heavy-duty welded steel construction
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
53
Dock Accessories/equipment
Trailer Stabilizing Jacks
Auto Stand
• 40,000 lb. lifting capacity
• Supports trailers up to 100,000 lb.
• 41” - 50.5” height range
Auto Stand
60-5452
The Glad Hand Lock
The perfect way to “Deadline” a trailer !
EASY INSTALLATION
Only one
stand
required!
$
64500
Ratchet Top Stabilizer Jack
•Superior safety device for
warehouses to prevent a trailer
from being moved while being
loaded or unloaded.
• Minimum security device to
prevent theft.
Ratchet Top Stabilizer Jack
60-5453
Glad Hand Lock
$
GLAD003-D ...................
• 40,000 lb lifting capacity
• Supports trailers up to 100,000 lb.
• 41” - 50.5” height range
• 2 jacks per trailer recommended
$
39000
The glad hand lock is applied to the
emergency brake (red) connection
of the trailer. This lock must be
removed before the air line from the
trailer can be connected and thereby
release the emergency brakes on the
trailer. An excellent way to dead-line
a trailer.
3595
Note: Locks can be keyed the
same or individually.
Wheel Chock Safety
System
Moulded Rubber
Laminate
Aluminum
Wheel Chocks
Item
DESCRIPTION
MLW-32
Moulded rubber w/ eye hook
68-9-I
Moulded rubber w/ eye hook (pyramid)
68-9-H
overall size (B x H x W)
Price
9.5” x 8.5” x 6.5”
$29.50
9” x 6” x 8”
$29.50
Moulded rubber w/ handle (pyramid)
10” x 15” x 8”
$29.50
SC-8
Aluminum Type
11” x 8” x 7”
$70.00
88-8
Laminated
8” x 8” x 8”
$40.00
Moulded Dock Bumpers
Moulded Dock Bumper
Dimensions:
13” x 10” x 4”
$
00
DBE-13 ............... 27
All dock bumpers have pre-drilled
countersunk mounting holes for
easy installation. 3/4” anchor
bolts required.
* Shipping extra unless otherwise stated.
54
Moulded Dock Bumper
Dimensions:
18” x 10” x 4”
M-18 .................... $4000
Most fatal accidents are a result of trailers
not being properly secured. This system
requires the truck driver to confirm that
the trailer brakes have been applied and
the wheels chocked. This is confirmed
by his signature that the trailer is safe to
enter. Kit comes complete with 20“(H) x 24”(W) sign, clip board, attached pen,
forms (can be photocopied) and mounting screws.
Wheel Chock Safety System
$
ATDS-1-D ....................................................................................
7995
Complete Wheel
Chock Safety
System
Part
Number Model
size
Weight
(lbs)
N/A
35
$14.00
9¾” base × 7¾” high
× 7¼” wide
14” wide × 8” high ×
4½” proj.
3/16” zinc plated
12” × 24”
13
$24.00
11
$19.00
9
$30.00
1
$29.50
¼
$4.00
DBS Wheel Chock Safety system
(includes Items 1 thru 5)
60-7259
(if replacing item 1 by item 5 please add)
$100.00
$5.00
(if replacing item 4 by item5 please deduct)
60-7258
1) DBS WHEEL CHOCK
60-7252
2) WHEEL CHOCK Bracket
60-7238
3) 1 Length of 15’ Tie Back Chain
60-7242
4) 1 Caution Sign (english or french)
60-7254
5) 4 Mounting Bolts (3/8” X 1-7/8” Anchors)
Price
(each)
* prices are subject to change without notice.
Dock Accessories/equipment
Pallet Pullerst
Kool-Lite Dock Light
Kooling down your maintenance costs
High-impact polycarbonate head is indestructible under normal
industrial use, eliminating the need for frequent, costly repairs and
leaves maintenance crews to be more productive. Shock-resistant
head weighs 50% less than conventional metal heads and bulb
is protected by wire guard. Includes mounting hardware. Bulb not
included.
PAL-12
PAL-14
PAL-21
PAL-LP
PULLING
CAPACITY
JAW
HEIGHT
JAW
OPENING
4, 000 lbs.
---
---
$66.00
PAL-12-B Single Scissor
5, 000 lbs.
2.75”
7.0”
$110.00
Item
PAL-2-B
DESCRIPTION
Interlocking
Price
PAL-14-B Cam Action Design
4, 000 lbs.
1.50”
3.125”
$150.00
PAL-21-B Double Scissor
5, 000 lbs.
2.75”
3.0”
$151.00
PAL-LP-B
5, 000 lbs.
2.0”
3.25”
$161.00
5, 000 lbs.
5, 000 lbs.
-----
-----
$72.00
$144.00
Double Scissor-Low Profile
PPC-20-B 20’ OF 0.25” Chain w/ Grab Hooks
PPC-40-B 40’ OF 0.25” Chain w/ Grab Hooks
Strip Door Curtains
Kool-lite Model D2-40-110V Dock Lite
$
95
60-5420........................................................................... 140
PVC Strip Door Curtains
•
•
•
•
•
•
See-through strips allow operators to see what is approaching
Fire-resistant, self -extinguishing PVC
Keep areas heated or cooled by sealing in air
All strips are cut and holes punched to size
Prevent the flow of dust and contaminants to outside areas
Universal mounting hardware is included
item
10-1200UM
10-1202UM
10-1204UM
10-1206UM
10-1208UM
10-1210UM
10-1216UM
10-1218UM
DESCRIPTION
PVC Strip Door Curtains
PVC Strip Door Curtains
PVC Strip Door Curtains
PVC Strip Door Curtains
PVC Strip Door Curtains
PVC Strip Door Curtains
PVC Strip Door Curtains
PVC Strip Door Curtains
dimensions
width
3’ x 7’
4’ x 7’
4’ x 8’
5’ x 8’
6’ x 8’
8’ x 8’
10’ x 10’
12’ x 12’
8”
8”
8”
8”
8”
12”
12”
12”
Replacement Strips
item
DESCRIPTION
PVC Strip Door Curtain Rolls
PVC Strip Door Curtains Rolls
PVC Strip Door Curtains Rolls
PVC Strip Door Curtains Rolls
PVC Strip Door Curtains Rolls
PVC Strip Door Curtains Rolls
$105.00
$135.00
$160.00
$201.00
$235.00
$299.00
$620.00
$850.00
Save $$
• See-through strips allow operators to see
what is approaching
12-1000
14-1000
14-1006
14-1008
14-1004
14-1020
PRICE
Order in bulk
dimensions
width
6” x 200’
6” x 400’
12” x 0.080” x 300’
12” x 0.120” x 200’
8” x 300’
48” x 60’
6”
6”
12”
12”
8”
48”
PRICE
$188.00
$320.00
$624.00
$572.00
$366.00
$552.00
NOTE: Standard PVC used for temperatures above -18 C; ask for options on
lower temperature applications.
O
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
55
Pallet Trucks/Stackers/Lift Tables
Liftow Pallet Star
High quality, feature rich pallet truck Features:
• Non-chip nylon wheels • Nylon entry wheels
• Adjustable push rods • Molded plastic handle grip
• 5,000 lbs capacity • Forks: 27” wide x 48” long or 20.5” wide x 48” long
• Lowered height: 2.95” • Raised height: 7.3”
great value
35000
$
PURCHASE 6 OR MORE
AND GET THEM
FOR $299.00 EACH!
Liftow General Purpose Pallet Truck
The Liftow general purpose hand pallet truck is designed to meet the challenges
of the modern material-handling environment. Uncompromised performance
and reliability for maximum operator productivity is what this truck delivers.
Whether your application is a warehouse, transport trailer, or factory, the Liftow
pallet truck will prove to be a valuable tool for your business.
ITEM
DESCRIPTION
PRICE
LR0655-A48
48”L x 27”W
$405.00
LR0655-B48
48”L x 20.5”W
$405.00
Other sizes available. Please call for pricing.
Available through Call Centre only.
F.O.B. Mississauga
Liftow Pallet Star-(27”x 48”)
$
LR0655-A48-99........................................................................
35000
Liftow Pallet Star-(20.5”x 48”)
$
LR0655-B48-99........................................................................
35000
Plastic Pallet Truck Caddy
Low Profile Pallet Truck (2” L.H.)
This economical product will convert standard pallet
truck into a portable workstation in minutes.
Many different pallets and skids in industry today have created a
need for unique pallet handling products. The Low Profile and Ultra
Low Profile series of hand pallet trucks by LIFT-RITE are designed
for low clearance pallet or skid openings. A specialized compact
fork design that does not compromise the 5,000 lb. capacity
makes this truck both productive and versatile.
Features
•Built-in can or cap holder in top
• Pen and pencil tray in top
•Clipboard holder in top
• Tool pockets on each side
•Storage / trash compartment
in back
Call for additional sizes
Low Profile Pallet Truck
$
L50M.......................................................................................
70000
Plastic Pallet Truck Caddy
$
P-CADDY....................................................................................
13900
* Shipping extra unless otherwise stated.
56
* prices are subject to change without notice.
Pallet Trucks/personnel carriers
PST Plus-Electrically
Powered Hand pallet truck
Four-Way Ultra-Low Profile Pallet
Truck (1.75” L.H.)
Saving time and energy is the need and the Premium HPT by
Lift-Rite is the solution. Ease of pallet entry thanks to rounded
fork tips and front climber wheels, reliable and robust fork frame
made of high tensile steel, ball bearings in the top piston
seat and the lower thrust plate for steering ease, and
polyurethane wheels provides a durable
rolling surface that is quiet and
non-marking.
priced at
2,73750
$
PST PLUS™ is a flexible, reliable and easily maneuvered hand pallet truck.
The power source is an electric motor which is activated and deactivated via
two push buttons on the handle. PST PLUS™ is ideal transport medium for
supermarkets, hospital corridors or distribution warehouses.
Call for additional sizes
Four-Way Ultra-Low Profile Pallet Truck
$
L50MU-4WAY............................................................................
77500
Features:
• Rated Capacity: 2,200 lb.
• Lowered fork height: 2.9”
• Fork width: 6.1”
• Weight: 236 lbs
• Drive wheel:
Polyurethane, 7x2 inch
• Load rollers, single: 3.3”x4”
L45-SS Stainless Steel Hand Pallet Truck
• Specially designed for corrosive
environments or applications
that demand high standards of
hygiene, such as food processing,
pharmaceutical, and marine
industries.
• All components are manufactured
from Stainless Steel or other noncorrosive materials, which gives
the truck reliability and long life.
• All surfaces are glass blasted to
provide a smooth surface and
allow easy cleaning.
• 10 grease fittings allow for grease replenishment to protect against corrosion.
NOTE: Other sizes available.
27” W X 48” L
$
PST+270048...........................................................................
2,73750
Freezer Truck L55F
The Freezer Special hand pallet truck by
LIFT-RITE is designed to resist the harsh effects
of temperature in freezer applications. The exterior
product treatment provides resistance to corrosion
due to condensation, while the hydraulic pump and
nylon wheels counter the effects of cold freezer
environments.
Stainless Steel Hand Pallet Truck: 27”x 48”, 4,500 lb. capacity
L45-SS.................................................................................
Personnel Carriers
Maintenance Team & Tools Carrier
2,68800
$
Freezer Truck: 27”x48”, 5,500 lb. capacity
$
L55F...........................................................................................
78500
“Sure Beats Walking”
Plant Personnel Carrier
Electric Tow Tractors
Large Load Carrier
Stock Picker
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
57
Pallet Trucks/Stackers/Lift Tables
... For the more unique type of application
Side Winder Pallet Truckt
•Service Range: 3-1/2” to 8”
•Net Weight: 311 lb.
•Fork Size: 27” x 48”
•Capacity: 3,000 lb.
Nose Wheel
Right/Left Wheels
Transport long loads down narrow aisles with this heavy duty Sidewinder
Pallet Truck. This versatile Pallet Truck retains all the quality workmanship of
a standard pallet truck, in addition to providing lateral movement. Simply place
the forks into the pallet then elevate to approximately seven inches, rotate
handle and lock detent into place. The second set of rollers, right/left, are now
actuated. Now push the Sidewinder perpendicular to the traditional direction.
Side Winder Pallet Truck
$
00
SW-PJ....................................................................................
899
Weigh your loads Designed for the
while handling for roughest, toughest
better efficiency. jobs.
built for
rough
terrain!
handles like a
standard
pallet
truck!
Pallet Truck w/ Scalet
The Pallet Truck With Scale allows
you to weigh your load on the spot
for maximum efficiency. The frame
has a heavy-duty steel construction
for maximum strength and durability.
This model is very user friendly and
is suitable for low height lifting and
short distance transportation. The
built in scale allows you to weigh
your load as your are handling it.
The scale is able to adjust to the
size of your load. It has keyboard
calibration and functional setup
with automatic zero capabilities.
The digital filtering is to help
compensate for vibration and
motion to operate smoothly.
* Shipping extra unless otherwise stated.
58
•Capacity is 5,000 lb.
• Load cells built into forks
• 99.9% accurate
• Mettler Toledo TM Scale
•Capacity: 5,000 lbs.
•Service Range: 3” to 7.5”
•Available in pounds or
kilograms
Pallet Truck Scale 21”W x 47.5” L
PM-2048-SCL-LP-B
$
2,10000
Pallet Truck Scale 27.5”W x 47.5” L
PM-2748-SCL-LP-B
$
2,10000
All Terrain Pallet Truckt
This lightweight yet strong tubular frame
handles evenly distributed loads up to
2,000 lbs. (2,000 lb. at 12" and 1,500 lb.
at 15"). Designed to travel over rough
ground where no ordinary pallet truck
can go. Use at construction sites, gravel
pits and nurseries. Features large 17"
front pneumatic tires and 10" steering
wheels. Individual fork width is 4". Easy
to operate with three position handle,
UP, DOWN and NEUTRAL.
• Large Wheels Reduce
Moving Effort
•Inside Straddle is 50" / Outside
Straddle is 64"
• Pneumatic Tires have Sealed
Bearings for Outside Durability
• Adjustable Fork Width: 9.5” to 26”
• Overall Size: 64”W x 50” L x 51”H
• Net Weight: 320 lb.
All Terrain Pallet Truck
$
ALL-T-2-B.................
1,20500
* prices are subject to change without notice.
Pallet Trucks/Stackers/Lift Tables
Durable, and powerful. Stackers.
Hand Pump Stacker
Capacity
3,000 pounds
Load
24 inches
• Compact strong design
• Top strong hydraulic pump
• Very maneuverable
Lowered Height
3 1/4 inches
Raised Height
31 1/2 inches
Fork Length
48 inches
Frame Width
20 1/2 & 27 inches
Overall Length
64 1/2 inches
Weight (Manual)
340 pounds
Weight (Electric)
440 pounds
Load Wheels
8 inch
Load Rollers
3 inch
Steering Arc
180 degrees
Scissor Construction
Solid Steel Bar
Electric Model
12 V DC Battery
powered and built-in
battery charger
(110/1/60)
Capacity
1,100/ 2,200 pounds
Lift Height
68”/ 98”
Fork Dimensions
21” wide x 46” long
Lowered Height
3.5”
Safety
brake on caster
Options
platforms for fork units
capacity
(LBS)
Lift
Height
Min. fork
Height
Price
HPS11-59
1100
59
3.5
$1250.00
HPS22-59
2200
59
3.5
$1,365.00
HPS22-98
2200
98
3.5
$1,935.00
Item
Foot Pump Stackers Also Available.
Electric Ergonomic 3000
LT132AJ
Item
Capacity
1,500, 2,000, 2,500* pounds
Load Center
24 inches
Lift Height
68”, 90”, 132”, 144”, inches
Straddle Inside
Dimension
26 - 50 inches (68 & 90 inch lift height)
42 - 50 inches (132 & 144 inch lift height)
Straddle Outside
Dimension
32 - 56 inches (68 & 90 inch lift height)
48 - 56 inches (132 & 144 inch lift height)
Fork Length
36, 42,48 inches
Swivel Casters
6 inch diameter Phenolic
Straddle Rollers
4 inch diameter Phenolic
Electric Lift
12 V DC Battery powered and built-in
battery charger
(110/1/60)(Optional 110/ 220 V AC or
Air Operated)
size
weight
capacity
rger30ea48
27” x 48”
440 lbs.
3,000 lbs.
$2,375.00
rger30eb48
20.5” x 48”
430 lbs.
3,000 lbs.
$2,375.00
All ELECTRIC ERGONOMIC 3000 units are equipped with a remote control port for easy addition of
a remote control option. When operating the ELECTRIC ERGONOMIC 3000 in the manual mode the
QUICK LIFT feature applies the same as with the MANUAL ERGONOMIC 3000
Options & Accesories
Item
description
straddle
clearance
from top
of mast
fork
length
CPCTY.
price
ID
OD
LENGTH
LL68J**042F
42”
48”
30.5”
82”
36”/42”/48”
1500 LBS.
$3,087.50
LL68J**044F
44”
50”
30.5”
82”
36”/42”/48”
1500 LBS.
$3,087.50
12V Hand Remote Control
$412.00
og-remoteflr
Foot Remote Control with Guard
$437.50
***Manual Ergonomic 300 also available.
Easy Lift Stacker
Price includes 12-volt lever operated hydraulic unit, heavy-duty battery and 12-volt charger for 110-volt input. For other
power alternatives please consult the Stacker Options List. Straddle ID is recommended to be 2” greater than the overall
pallet width. Straddle OD is 6” greater than straddle ID.
Lift-Right Double Stage (Telescopic) Stacker
Item
t132k**042f
t132k**044f
t132L**042f
straddle
ID
OD
LENGTH
42”
44”
42”
48”
50”
48”
30.5”
30.5”
30.5”
Lifting or transporting light-weight
materials can be done easily with
the Easy-Lift. The Easy-Lift is an
economical solution to material
handling applications at lower load
capacities. Lifting and locking load
in place is accomplished by a
hand winch.
Capacity
500 pounds
Load Center
10 inches
top
Lowered
top
Raised
fork
length
CPCTY.
price
Platform Size
20 x 20 inches
Lift Height
52 inches
88”
88”
93”
154”
154”
159”
36”/42”/48”
36”/42”/48”
36”/42”/48”
2,000 lbs.
2,000 lbs.
2,500 lbs.
$3,937.50
$3,937.50
$4,125.00
Overall Height
60 inches
Lowered Height
4 1/2 inches
Weight
98 Pounds
Wheels
6 inch diameter Nylon
Swivel Casters
3 inch diameter Nylon
Stacker Options (All Models)
Item
Price
og-remotehnd
Lift-Right Single Stage Stacker
Item
Price
description
Price
oc-5thwheel
5th Wheel - available on models up to LT144
$343.75
oc-splipplat
24” x 36” slip on platform
$187.50
oc-workplat
33” x 33” work platform with one door
$562.50
Easy Lift Stacker
$
EASYLIFT-D ...............................................................
Please call For more information on all Lift applications
47500
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
59
Pallet Trucks/Stackers/Lift Tables
Table 770 lb. Capacity
Lift Table 330 lb. Capacity
• Overall Size: W x L: 17.75” x 35”
• Collapsible handle
• Capacity: 330 lbs.
• Table W x L: 17.75” x 27.5”
• Lowered Height: 8.75”
•Raised Height: 29.5”
•Handle Height: 38”
• Wheels: 4” Polyurethane (2 fixed – 2
swivel)
• Foot Pump operation
•Hand lever release
• Weight: 101 lbs.
Lift Table 330 lb. Capacity
$
ELT330.........................................................................................
• Overall Size W x L: 19.75” x 46”
• Collapsible handle
• Capacity: 770 lb.
• Table W x L: 19.75” x 36”
• Lowered Height: 13.5”
•Raised Height: 51.5”
•Handle Height: 39”
• Wheels: 5” Polyurethane (2
fixed – 2 swivel)
• Foot Pump operation
•Hand lever release
• Weight: 265 lb.
47500
Lift Table 770 lb. Capacity
$
ELT770..............................................................................
65000
Lift Table 660 lb. Capacity
• Overall Size W x L: 19.75” x 41”
• Collapsible handle
• Capacity: 660 lb.
• Table W x L: 19.75” x 32”
• Lowered Height: 11”
•Raised Height: 35.5”
•Handle Height: 39”
• Wheels: 5” Polyurethane (2
fixed – 2 swivel)
• Foot Pump operation
•Hand lever release
• Weight: 165 lb.
Lift Table 1,100 lb. Capacity
Lift Table 660 lb. Capacity
$
ELT660........................................................................................
55500
• Overall Size: W x L: 19.75” x 42”
• Collapsible handle
• Capacity: 1100 lbs.
• Table W x L: 19.75” x 32”
• Lowered Height: 11.25”
•Raised Height: 35.5”
•Handle Height: 38”
• Wheels: 5” Polyurethane (2 fixed
– 2 swivel)
• Foot Pump operation
•Hand lever release
• Weight: 187 lb.
Lift Table 1,100 lb. Capacity
$
ELT1100...........................................................................
Portable Foot Pump Lift Tables
Item
Capacity(lbs) PlatForm Base (w” x l”)
Price
PFL330
330
17.7 x 28
$395.00
PFL550
550
19.7 x 32.7
$495.00
PFL1100
1100
20.5 x 39.8
$550.00
PFL1650
1650
20.5 x 39.8
$625.00
PFL2200
2200
20.5 x 39.8
$695.00
Double Scissor Lift Table’s also available
Portable Foot Pump Lift/Tilt Tables
Capacity
PlatForm Base
PFLT880
880
20.5 x 32.7
$895.00
PFLT1760
1760
20.5 x 32.7
$995.00
Item
(lbs)
Price
(w” x l”)
Portable Battery Lift/Tilt Tables
Capacity
PlatForm Base
(w” x l”)
Price
PBLT880
880
20.5 x 32.7
$1,995.00
PBLT1760
1760
20.5 x 32.7
$2,195.00
Item
(lbs)
69000
Lift Table 1,650 lb. Capacity
•Overall Size: W x L: 22.25” x 52”
•Collapsible handle
•Capacity: 1650 lb.
• Table W x L: 20.5” x 39.25”
• Lowered Height: 16.5”
•Raised Height: 40”
•Handle Height: 39”
•Wheels: 6” Polyurethane
(2 fixed – 2 swivel)
•Foot Pump operation
•Hand lever release
•Weight: 254 lb.
Lift Table 1,650 lb. Capacity
$
ELT1650............................................................................
79000
Please call For more information on all Lift applications
* Shipping extra unless otherwise stated.
60
* prices are subject to change without notice.
Pallet Trucks/Stackers/Lift Tables
Hydraulic Post Tables
Adjustable Work Stands
Item
Capacity(lbs) PlatFORM SIZE (w” x l”) tABLE HEIGHT
Price
Item
Capacity(lbs) PlatFORM Base (w” x l”)
Price
AWP33-20
330
20 x 16
20 TO 27
$175.00
PT2-1616
200
16 x 16
$395.00
AWP33-28
330
20 x 16
28 TO 42
$195.00
PT5-1818
500
18 x 18
$575.00
PT10-1836
1000
18 x 36
$650.00
PT20-2436
2000
24 x 36
$695.00
PT20-3248
2000
32 x 48
$795.00
PT20-2436-37
2000
24 x 36
$750.00
PT20-3248-37
2000
32 x 48
$825.00
PT40-2436
4000
24 x 36
$850.00
PT40-3248
4000
32 x 48
$950.00
PT60-2436
6000
24 x 36
$900.00
PT60-3248
6000
32 x 48
$995.00
Low Profile Lift Table
Item
Capacity(lbs)
STD. Plat Base (w” x l”)
Price
LP29-5
500
24 x 48
$3,995.00
LP29-10
1,000
24 x 48
$4,195.00
LP29-20
2,000
24 x 48
$4,395.00
LP29-40
4,000
24 x 48
$4,595.00
4LP29-5
500
48 x 48
$4,295.00
ABTR-SL10-3648
1,000
36 x 48
$4,650.00
4LP29-10
1,000
48 x 48
$4,495.00
ABTR-SL20-3648
2,000
36 x 48
$4,950.00
4LP29-20
2,000
48 x 48
$4,695.00
ABTR-SL40-3648
4,000
36 x 48
$5,650.00
4LP29-40
4,000
48 x 48
$4,995.00
ABTR-SL60-3648
6,000
36 x 48
$6,950.00
Air Bag Lift/Tilt Table
Item
Capacity(lbs) STD. Plat Base (w” x l”)
Price
Options
• Oversized platforms 60”, 72”, 84” x 72”
• Larger 48” and 60” wide base.
Please call For more information on all Lift applications
To order or for more information call us at
1-866-GO-LIFTOW(465-4386)
Fax your order: 1-800-242-6685
www.liftow.com
61
Safety Accessories
Red Dog/Blue Dog Gloves
New Safety Box Opener
& Stretch Wrap Cutter
Box cutter
Better grip, better dexterity, high visibility.
Excellent for picking up paper or cardboard. Red
gloves have single coating and the blue dogs have
double coating. Sold in packages of 12 pairs.
Stretch wrap cutter
Dull blade never has to be retracted
Never damages product when opening boxes
Impossible to cut product and skin.
Red Dog Gloves
Sold in packs of 10
Safety Box Opener
DFC-364-G............................................................... $
2. /ea.
99
OLFA SK-4 Safety Knife
Revolutionary spring-retractable safety
cutter features right or left handed
operation, powerful return
spring, stainless steel
blade channel and
ergonomic grip.
Eliminates injuries
because blade remains
extended while cutting
and automatically retracts the
instant the blade loses contact with the cutting surface. The handle
is guaranteed forever. Comes with Knife, leather belt holder and 10
replacement blades.
Note: Limited quantities available
Blade
pushed out
Blade snaps
back in
OLFA Knife, 10 replacement blades and leather knife holder
OLFA-C...................................................................... $
11.95
* Shipping extra unless otherwise stated.
62
Blue Dog Gloves
Red Dog- Small to Medium
$
19/121........................................................................
0.60/pair
Blue Dog- Medium to Large
$
19/122........................................................................
0.90/pair
Leather Palm Gloves
These gloves are perfect for everyday use.
The index finger is entirely made of leather
to increase durability. Sold in packages of
12 pairs.
Leather Palm Gloves
$
735-A............................
1.35/pair
Lift Truck First-Aid Kit
Comes complete with a Nylon pouch
with Velcro strips to attach to
lift truck. Overall Dimensions:
4.75”L x 3”Hx2”D
Supply Assortment:
10 Bandages, Plastic 3/4”x3”
2 Butterfly Bandages
3 Gauze Pads 2”x2”
5 BZK Towelettes
2 Triple Antibiotic Ointments
2 Sting Relief Towelettes
1 Cold P ack, disposable 5”x6”
1 Tape 1/2”x5yds., uncovered
1 Pair of Tweezers
2 Gloves, vinyl`
Lift Truck First-Aid Kit
$
FAK-A....................................
9.95/ea.
* prices are subject to change without notice.
A
Aerial Work Platform Training
..............................................17
Aisle marking tape..................3
Alarms - Back-up..................32
Atrium...................................33
Attachments..........................42
B
Back-Up Alarm.....................32
Back-up Handle....................35
Back Safety 101....................20
Battery Accessories... 23, 24, 25
Battery Cable Protectors.......24
Battery Lifting Beam............23
Battery Maintenance System
..............................................23
Battery PPE Kit.....................24
Battery Roller Service Stands
..............................................23
Battery Tugger......................23
Battery Watering Systems.....24
Batt 1000 - Battery Cleaner..24
Blind Spot Dome Mirror.......29
Bobcat/Loader Training........17
Bollard Post Sleeves.............36
Booms-Forklift......................45
Box Opener& Stretch
Wrap Cutter...........................62
C
Carbon Monoxide Detector...26
Carpet Poles..........................42
Carts................................ 47, 49
Catalytic Converter...............27
Checklist Caddy....................29
Chocks..................................54
Column Guards.....................39
Column Protectors................36
Concrete Repair....................37
Conveyors.............................12
Corner Protectors..................36
Curb Ramp............................47
Cushion.................................35
D
Danger Zone..........................21
De-ionizer.............................24
Dissipater..............................24
Dockplates & Dockboards
........................................ 47, 52
Dock Board...........................53
Dock Bumpers......................54
Dock Plate.............................52
Door Curtains........................55
Drum Grippers......................46
Drum Handlers......................46
DuraStripe.............................37
E
Edge-O-Dock Leveler...........53
Electronic Code Switch.........30
Eyeware.................................25
F
Fillwatch...............................24
Fire Extinguisher...................32
First-Aid Kit..........................62
Fork-Kushions......................43
Forklifts...................................5
Forklift Attachments
............................ 42, 43, 44, 45
Forks.....................................43
Forkshield.............................33
Fork Caddy.......................... 43
Fork Calipers.........................43
Fork Extensions....................42
G
Gator grip tape....................... 3
Glad Hand Lock....................54
Gloves...................................62
H
Hand Carts............................47
Harness..................................28
Head Lights...........................32
High Impact..........................21
Hook Plates...........................23
Hoppers.................................51
Hydraulic Attachments..........44
I
Instructor Training................16
J
Jacks......................................54
K
Knife.....................................62
Kool-Lite Dock Light...........55
L
Ladders..................................50
Lanyard.................................28
Leveler-Dock........................53
Lift Tables....................... 60, 61
Lift Temp...............................14
Lift Truck Caddy...................32
Lift Truck Log................... 2, 29
Lights....................................32
Lock-out Box.................... 2, 29
Lockout/Tagout Video Program
..............................................19
LP Cylinder Loader...............27
M
Magnetic Sweeper.................41
Manuals........................... 19, 20
Mirror-Dome.........................29
Mirror-Warehouse.................22
Model Lift Trucks.................21
N
Nek-Sav.................................35
O
OLFA Safety Knife...............62
P
Pallet Dumper.......................42
Pallet Jockey.........................43
Pallet Truck-All Terrain........58
Pallet Trucks.........................56
Pallet Truck w/ Scale............58
Parts......................................38
Pedestrian Guarding..............38
Personnel Carrier..................57
Photoluminescent tape............3
Plastic Pallet Truck Caddy....56
Platform Trucks.....................48
Poly Products........................47
Posters...................................31
Post Sleeves..........................36
Post Tables............................61
Propane Cylinder Cart...........27
Propane Cylinder Storage
Cabinets.................................27
Propane Fuel Indicator Kit....26
Propane Handling Caddies....27
Propane PPE -4- LPG...........26
Propane Training Program....19
Propane Handling Gloves....26
Protect-it................................39
R
Racking.................................12
Rain Shields..........................33
Ramp-Pallet Truck................47
Retracto-Gloves....................26
Support Materials..................20
Sweepers...............................41
T
Technocarb............................27
Toyota.....................................5
Traffic Vest............................28
Trailer Stabilizing Jacks........54
Train-the-Trainer...................17
Training........................... 16, 17
Training Aids............. 19, 20, 21
Train Your Operators It’s the law!...........................15
Trash Can Dumper................42
Tuff-mark Aisle tape...............3
U
Ultimate Training Package....21
Used trucks..............................8
V
Videos............................. 19, 20
W
Wagon...................................48
Walkie Pallet Truck.................5
Wall Protectors......................36
Watering Cart........................24
What’s Wrong With This?.....20
Wheel Chock.........................54
Wheel Risers.........................52
WHMIS.................................19
WHMIS for Workers.............19
WHMIS Training............ 17, 19
Wire Lift Truck.....................21
Wire Mesh Containers..........38
Wire Mesh Pallet...................38
Work Platform.......................50
Work Stands..........................61
S
S.A.F.E.-Lift on DVD...........21
Safe-tilt..................................39
Safe-Weigh............................40
Safety Mats.............................2
Safety Training.... 16, 19, 20, 21
Scale-Forklift........................40
Seat Belt................................30
Seat Belts..............................30
Seats......................................34
Service...................................11
Signs......................................31
Solar Cap...............................33
Speed Saver...........................39
Stabilizing Jack.....................54
Stacker...................................59
Stickers..................................31
Stock Picking Trucks............49
Strip Door Curtains...............55
Strobe Lights.........................32
t = shipping included to GTA Restocking Fee of 25% will apply to all returns.
index
Index
Visit us at
www.liftow.com
Win!
maple
Leafs
Tickets
enter online
www.liftow.com/win
The winner of the Toronto Maple Leafs Tickets
will be announced in the next catalogue.
FREE!
Lift Truck Log
For more information
1-800-242-6685
FaxBack to
or
go on-line www.liftow.com/faxback
Get Liftow Certified.
The Standard in
Operator Training
I want to know
more about
the new
8-series Lift Truck
Send me more information on:
Existing Operator Training
New Operator Training
Train-the-Trainer Forklift
Supervisor Awareness
Crane Training
Aerial Work Platform
Basic Certification New
Other _______________
All of our training programs
Send me more information on:
Propane Counterbalance
Electric Counterbalance
Narrow Aisle Electric Trucks
Electric Pallet Trucks
Lift Truck Rentals
Service Programs
Complete OSHA Checklist System
The most complete
Lift Truck recording
system on the market.
Providing the
best in
staffing solutions.
go to:
www.liftow.com/freelog
Send me more information on:
Used
Forklifts
Online
www.liftow.com/parts
Please fill out if information is
different from address label.
Clerical Personnel
www.lifttemp.com
Visit us on the web! Log on @ www.liftow.com
call today! 1-866-go-liftow
(1-866-465-4386)
Give us a call,
Today! Toll free
Company:
Address:
City:
E-mail:
Used Toyota Lift Trucks
For more information on
any of our products or
services
Name:
Fax:
used toyota trucks!
General Labour Personnel
Order Parts
Online
Phone:
Shelving
I want to know more about
Certified Forklift Operators
www.liftow.com/used
Prov:
Racking
Postal Code:
02646633
We’re raising
the standard in the
material handling
industry. Bringing
you more than just
lift trucks!
Recyclable where
facilities exist!