TimpTe “B Train”

®
SINCE 1884
Timpte “B Train”
From any angle the Timpte “B Train” combines form and
function. Smooth aerodynamic double wall aluminum
sidewall cuts cleanly through the wind with its fuel efficient
design. This sidewall design was pioneered by Timpte in the
1960’s. Two rows of L.E.D. side marker lamps are standard.
•
•
•
•
•
•
Numerous options
Local Parts & Service Support
Aerodynamic Smooth Double Wall
#1 Selling Grain Hopper in No. America
3 Year Limited Warranty
Lightweight Aluminum Construction
www.timpte.com
736 3/16"
342"
342"
51"
Timpte “B Train” is standard with a 15 degree slope on the
rear of the lead and the front of the pup. The tri-axle sub frame
is designed to be clean, light weight, but not light duty. The
sub frame is designed to handle the rigors of the Canadian
weather and is coated with “Black Armor” to protect from
corrosive elements.
89 3/8"
20"
24"
89 3/8"
49"
• All Timpte hoppers are standard with easy access ladders,
platforms, and grab handles. The originator of the “Flip
Down” Rear ladder makes rear access effortless.
• Nose panels are thicker .063” aluminum in lieu of thinner
panels on competitor’s models.
121"
STANDARD SPECIFICATIONS
B-TRAIN PUP UNIT — 28'6" TANDEM AXLE
(28'6" Overall Length)
1. KINGPIN SETTING:
2. WALL PANELS :
Timpte hopper tubs are made of formed aluminum sheets.
Design allows product to flow freely. Rubber flaps eliminate
any potential water intrusion. All Timpte trailers are standard
with liquid filled air scale gauge and dump valve in a
weatherproof box.
229 3/16"
20"
Pre-painted white .048" and .063" aluminum, corrugated
on 4" centers.
3. ACCESS:
Aluminum ladders, handholds, and platforms front and
rear.
4. FRONT CORNERS:
3" x 4" rectangular tube, mill finish aluminum
5. NOSE ASSEMBLY:
Extruded mill finish aluminum construction. 15 degree
rearward slant.
6. LIGHTS & WIRING:
CMVSS-108 w/weather-pack automotive style
connections w/L.E.D. lights
7. SUPPORT LEGS:
50,000 lbs. lift capacity with roadside removable crank,
low-profile shoe.
8. HOPPERS:
Two piece .125" aluminum formed tubs with 35.8 degree
side slopes and 33 degree end slopes. Single tub design.
Both hopper doors open from the center out. End slope
panels-.080" aluminum supported by aluminum channel
with Z shaped member. Divider Panel - .080 aluminum.
9. TRAPS:
30"W x 22"L Hopper clearance 25".
10. SUSPENSION & AXLES: 23,000 lb. rated air ride suspension 5" diameter axle
with 10'1" total axle spread. Center axle is equal distance
from front and rear axles.
11. BRAKES:
16-1/2" X 7" complying with CMVSS 121. Meritor/Wabco
4 sensor, 2 modulator which exceeds the minimum
requirements of CMVSS 121, S5.5.
12. WHEELS:
Eight (8) 24.5 x 8.25 white steel disc painted, hub
piloted.
13. TIRES:
Eight (8) 11R24.5 Bridgestone R195F radials.
14. TARP:
18 oz. roll tarp with front mounted crank.
15. TARP BOWS:
Five (5) - 9" rise galvanized steel arch type.
16. PAINT:
Black protective metal coating on all steel parts.
288 13/16"
STANDARD SPECIFICATIONS
B-TRAIN LEAD UNIT — 38' TRIAXLE
ALL DIMENSIONS
(28'6" Hopper Body Assembly – 38' Overall
length)ARE IN INCHES
UNLESS OTHERWISE NOTED
REV.
1. KINGPIN SETTING:
2. WALL PANELS:
TOLERANCES—EXCEPT AS SPECIFIED
24"
ANGLE: +/- 2°
DECIMALS:
.X
+/- .1
HOLE LOC. +/- 1/32”
.XX on
+/- .03
Pre-painted white .048" and .063"FRACTIONS:
aluminum,
corrugated
OTHER
+/- 1/16”
.XXX +/- .002
4" centers.
TIMPTE
----- platforms front and rear
3. ACCESS:
Aluminum ladders, handholds, and
TJR
B-TRAIN ASSEMBLY
4. FRONT CORNERS:
6" radius, mill finish aluminum (color
optional).
38'-6"
LEAD
W/ 28'-6" PUP
8/15/2008
84H
----5. LIGHTS & WIRING:
CMVSS-108 w/weather-pack ----automotive102W
style
connections
--965-47260
----w/L.E.D. lights
6. SUPPORT LEGS:
50,000 lb. lift capacity with roadside removable crank, lowprofile shoe.
7. HOPPERS:
Two piece .125 aluminum formed tubs with 35.8 degree
side slope angle and 33 degree end slope angle. Single
tub design. Both doors open from the center out. End slope
panels-.080" aluminum supported by aluminum channel
with Za shaped member, 33 degree slope angle. Divider
Panel - .080 aluminum.
8. TRAPS:
30"W x 22"L Hopper clearance 25".
9. SUSPENSION & AXLES:23,000 lb. rated air ride suspension 5” diameter axle with
49" axle spacing lead.
10. BRAKES:
16-1/2" X 7" complying with CMVSS 121. Meritor/Wabco
4 sensor, 2 modulator which exceeds the minimum
requirements of CMVSS 121, S5.5.
11. WHEELS:
Twelve (12) 24.5 x 8.25 white steel disc painted, hub
piloted.
12. TIRES:
Twelve (12) 11R24.5 Bridgestone R195F radials.
13. TARP:
18 oz. roll tarp with rear mounted crank.
14. TARP BOWS:
Five (5) - 9" rise galvanized steel arch type.
APP BY:
DATE REL:
SCALE:
DRWN BY:
8/15/2008
R
TITLE:
DATE DRWN:
USED ON
DRAWING NO.:
15. PAINT:
16. REAR FRAME:
17. FIFTH WHEEL:
REV.
Black protective metal coating on all steel parts.
Stainless steel and aluminum construction. 15 degree forward
slant.
Holland FW7040 Kompensator. W/progressive grease manifold.
NOTES:
All Dimensions are = or – ¼”.All Specification
subject to change Timpte reserves the
right to change design specifications with
out notice contained herein is general in
nature and is not intended for specific
applications.
WARRANTY: See Timpte Warranty Card
DATE BY
DESCRIPTION
This drawing is the property of TIMPTE, INC., and is loaned with the following conditions:
1. It shall not be used in any way deleterious to the interests of TIMPTE, INC.
2. Neither this drawing nor any of the information contained herein shall be used for the making of drawings, prints or for any other purpose,
including without limitation, the making or manufacturing of any thing, apparatus, or part, except upon the prior written consent of TIMPTE, INC.
3. Upon request this drawing and all copies thereof shall be returned to TIMPTE, INC.
4. The information contained in this drawing is confidential and shall not be conveyed to any other person, party, or entity outside of the borrowing
organization or entity.
5. The acceptance of this drawing is an acceptance of the foregoing terms and conditions and an admission that TIMPTE, INC. is the exclusive
owner in and to the drawings and information and ideas contained herein.
SERVING THE TRANSPORTATION INDUSTRY SINCE 1884
Contact your nearest Canadian
Authorized Timpte Dealer or:
Timpte Industries
1827 Industrial Drive
David City, Nebraska, 68632 U.S.A.
(402)-367-3056
sales@timpte.com
www.timpte.com
January 2009