Lampholders

Lampholders
Edison lampholders -
TECHNICAL CHARACTERISTICS
E14 lampholders
Technical specifications
•rated voltage: 250 V
•rated current: 2 A
•rated operating temperature: 190 °C
•glass reinforced polyester resin body and screw shell
•pillar terminals for conductors up to 1 mm2
•safety catch
•insulating self-extinguishing materials, complying with Italian
standard CEI 50-11 (IEC 60695-2-1, IEC 60695-2-2):
-parts necessary to retain current-carrying parts in position,
needle-flame test ta 10 s
- parts only used as enclosure, glow wire test (GW) at 650 °C
Conformity to Standards
LV Directive
EN 60238 Standard
02124
ø 36
02127.S
ø 36
02127
ø 28
02196
53
ø 28
02121.S
ø 26
18
15
53
ø 26
53
02121
53
53
53
Dimensions (in mm)
15
02124.S
02129
02129.B
­­­810
ø 43
ø 29
02197
ø 31
LIGHTING
Edison lampholders
E14 lampholder - M10x1 nipple
02121
02121.B
02124
02124.B
02127
02127.B
E14 lampholder, M10x1 nipple with locking screw, smooth skirt, glass reinforced polyester resin, black
As above, white
E14 lampholder, M10x1 nipple with locking screw, partially threaded skirt with shade-holder seat, glass reinforced polyester resin, black
As above, white
E14 lampholder, M10x1 nipple with locking screw, threaded skirt, glass reinforced polyester resin, black
As above, white
02121
02121.B
02124
02127
02124.B
02127.B
E14 lampholder - dome with shaped threaded entry
02121.S
02121.S.B
02124.S
02124.S.B
02127.S
02127.S.B
E14 lampholder, dome with shaped threaded entry, smooth skirt, glass reinforced polyester resin, black
As above, white
E14 lampholder, dome with shaped threaded entry, partially threaded skirt with shade-holder seat, glass reinforced polyester resin, black
As above, white
E14 lampholder, dome with shaped threaded entry, threaded skirt, glass reinforced polyester resin, black
As above, white
02121.S
02121.S.B
02124.S
02124.S.B
02127.S
02127.S.B
E10 lampholder for use up to 24 V
02196
02197
E10 lampholder, bakelite base, black, Fixing holes ø 3,5 mm, fixing centres 21 mm, base ø 29 mm
E10 lampholder, porcelain base. Fixing holes ø 3,5 mm, fixing centres 22 mm, base ø 32 mm
02129
02129.B
LIGHTING
ACCESSORIES
Accessories
Screw ring for E14 lampholders with threaded skirt, glass reinforced polyester resin, black
As above, white
02196
02197
02129
02129.B
­­­811
Lampholders
Edison lampholders -
TECHNICAL CHARACTERISTICS
Metal E14 lampholders
02145
57
57
Technical specifications
•rated voltage: 250 V
•rated current: 2 A
•rated operating temperature: 190 °C
•heat resistant resin body and screw shell
•pillar terminals for conductors up to 1 mm2
•lateral double resilient contact
•safety catch
ø 28
02147
ø 28
02148
ø 28
Conformity to Standards
02146
57
57
LV Directive
EN 60238 Standard
ø 28
36
90° E14 lampholders
53
13
•rated voltage: 250 V
•rated current: 2 A
•rated operating temperature: 190 °C
•glass reinforced polyester body and screw shell
•pillar terminals for conductors up to 1 mm2
•safety catch
•bright finish
•insulating self-extinguishing materials, complying with Italian
standard CEI 50-11 (IEC 60695-2-1, IEC 60695-2-2):
-parts necessary to retain retain current-carrying parts in position, needle-flame test ta10 s
- parts only used as enclosures, glow wire test (GW) at 650 °C
62
Technical specifications
02150
02135
02135.B
ø 40
ø 26
Conformity to Standards
LV Directive
EN 60238 Standard
ø 33
02195 - Lampholder
Conformity to Standards
LV Directive
EN 60238 Standard
­­­812
43
•rated voltage: 250 V
•rated current: 2 A
•rated operating temperature: 210 °C
•pillar terminals for conductors up to 2,5 mm2
•spring loaded central contact
41
Technical specifications
02194
ø 50
02195
LIGHTING
Edison lampholders
Metal E14 lampholder - M10x1 nipple
02145
02147
E14 lampholder, M10x1 nipple with locking screw, zinc-plated polished steel dome and smooth skirt, brass finish
E14 lampholder, M10x1 nipple with locking screw, zinc-plated polished steel dome and threaded skirt, brass -finish
02145
02147
Metal E14 lampholder - M10x1 nipple - earth terminal in dome
02146
02148
02150
E14 lampholder, M10x1 nipple with locking screw and earth terminal in dome, zinc-plated polished steel dome and smooth skirt, brass finish
E14 lampholder, M10x1 nipple with locking screw and earth terminal in dome, zinc-plated polished steel dome and threaded skirt, brass finish
Screw ring for E14 lampholders with threaded skirt, zinc-plated polished steel brass finish
02146
02148
02150
Other E14 lampholder
90° E14 lampholder, glass reinforced polyester resin, black
As above, white
E14 lampholder, porcelain. Fixing holes ø 32 mm, 18 mm fixing centres screws
E14 lampholder, insulated metal screw shell, pillar terminals, straight porcelain base. Fixing holes ø 4 mm, fixing centres 39 mm, base ø 50 mm
02135
* Only for Countries not members of the EU
02135.B
02195
LIGHTING
ACCESSORIES
02135
02135.B
02195
*02194
02194
­­­813
Lampholders
Edison lampholders -
TECHNICAL CHARACTERISTICS
E27 lampholders
Technical specifications
•rated voltage: 250 V
•rated current: 4 A
•rated operating temperature: 190 °C
•glass reinforced polyester resin body and screw shell
•pillar terminals for conductors up to 1 mm2
•safety catch
•insulating self-extinguishing materials, complying with Italian
standard CEI 50-11 (IEC 60695-2-1, IEC 60695-2-2):
-parts necessary to retain current-carrying parts in position,
needle-flame test ta 10 s
- parts only used as enclosure, glow wire test (GW) at 650 °C
Conformity to Standards
LV Directive
EN 60238 Standard
02104
ø 47
02107.S
58
58
ø 47
02107
ø 40
02109
ø 40
58
ø 38
15
58
02101
58
58
Dimensions (in mm)
02104.S
­­­814
ø 55
02101.S
ø 38
LIGHTING
Edison lampholders
E27 lampholder - M10x1 nipple
02101
02101.B
02104
02104.B
02107
02107.B
E27 lampholder, M10x1 nipple with locking screw, smooth skirt, glass reinforced polyester resin, black
As above, white
E27 lampholder, M10x1 nipple with locking screw, partially threaded skirt with casing lock, glass reinforced polyester resin, black
As above, white
E27 lampholder, M10x1 nipple with locking screw, threaded skirt, glass reinforced polyester resin, black
As above, white
02101
02101.B
02104
02104.B
02107
02107.B
E27 lampholder - dome with shaped threaded entry
02101.S
02101.S.B
02104.S
02104.S.B
02107.S
02107.B
E27 lampholder, dome with shaped threaded entry, smooth skirt, glass reinforced polyester resin, black
As above, white
E27 lampholder, dome with shaped threaded entry, partially threaded skirt with shade-holder seat, glass reinforced polyester resin, black
As above, white
E27 lampholder, dome with shaped threaded entry, threaded skirt, glass reinforced polyester resin, black
As above, white
02101.S
02101.S.B
02104.S
02104.S.B
02107.S
02107.S.B
Accessories
Shade-holder ring for E27 lampholders with threaded skirt, glass reinforced polyester resin, black
As above, white
02109
02109.B
­­­815
LIGHTING
ACCESSORIES
02109
02109.B
Lampholders
Edison lampholders -
TECHNICAL CHARACTERISTICS
Metal E27 lampholders
56
•rated voltage: 250 V
•rated current: 4 A
•rated operating temperature: 240 °C
•porcelain body
•insulated material screw shell
•pillar terminals for conductors up to 2.5 mm2
•safety catch
56
Technical specifications
02141
ø 38
02143
ø 38
02144
ø 40
ø 38
13
02142
57
Direttiva BT
Norma EN 60238
57
Conformity to Standards
ø 56
02149
57,5
90° E27 lampholders
Conformity to Standards
LV Directive
EN 60238 Standard
­­­816
58
•rated voltage: 250 V
•rated current: 4 A
•rated operating temperature: 190 °C
•glass reinforced polyester resin body and screw shell
•pillar terminals for conductors up to 1 mm2
•safety catch
•insulating self-extinguishing materials, complying with Italian
standard CEI 50-11 (IEC 60695-2-1, IEC 60695-2-2):
-parts necessary to retain current-carrying parts in position,
needle-flame test ta 10 s
- parts only used as enclosure, glow wire test (GW) at 650 °C
70
Technical specifications
02115
02115.B
ø 38
LIGHTING
Edison lampholders
Metal E27 lampholder - M10x1 nipple
02141
02143
E27 lampholder, M10x1 nipple with locking screw, zinc-plated polished steel dome and smooth skirt, brass finish
E27 lampholder, M10x1 nipple with locking screw, zinc-plated polished steel dome and threaded skirt, brass finish
02141
02143
Metal E27 lampholder - M10x1 nipple - earth terminal in dome
02142
02144
02149
E27 lampholder, M10x1 nipple with locking screw, dome with earth terminal, zinc-plated polished steel dome and smooth skirt, brass finish
E27 lampholder, M10x1 nipple with locking screw, dome with earth terminal, zinc-plated polished steel dome and threaded skirt, brass finish
Shade-holder ring for E27 lampholders with threaded skirt, zinc-plated polished steel, brass finish
02142
02144
02149
90° E27 lampholder
90° E27 lampholder, glass reinforced polyester resin, black
As above, white
LIGHTING
ACCESSORIES
02115
02115.B
02115
02115.B
­­­817
Lampholders
Edison lampholders -
TECHNICAL CHARACTERISTICS
02174... - Lampholders
Technical specifications
•rated voltage: 250 V
•rated current: 4 A
•rated operating temperature: 270 °C
•insulated metal screw shell
•screw terminals for conductors up to 2.5 mm2
ø 43
ø 43
ø 43
Conformity to Standards
47
47
02174.D
02174
•rated voltage: 750 V
•for switching on voltages up to 5 kV
•rated current: 4 A
•rated operating temperature: 210 °C
•insulated metal screw shell
•screw terminals for conductors up to 2.5 mm2
02174.S
ø 50,5
ø 50,5
47,5
47,5
02182... - Lampholders
Technical specifications
47
LV Directive
EN 60238 Standard
Conformity to Standards
LV Directive
EN 60238 Standard
02182
02182.D
02164 - Lampholders
Technical specifications
44
•rated voltage: 250 V
•rated current: 4 A
•rated operating temperature: 220 °C
•insulated metal screw shell
•pillar terminals for conductors up to 2.5 mm2
ø 48
02164
Conformity to Standards
58
02187 - Lampholders
Technical specifications
•rated voltage: 750 V
•for switching on voltages up to 5 kV
•rated current: 18 A
•rated operating temperature: 270 °C
•metal screw shell
•screw terminals for conductors up to 4 mm2
ø 64
73
02250
02100 - Lampholders
Technical specifications
02365
ø64,5
80
ø 70
82
•rated voltage: 750 V
•for switching on voltages up to 5 kV
•rated current: 18 A
•rated operating temperature: 240 °C
•metal screw shell
•screw terminals for conductors up to 4 mm2
63
LV Directive
EN 60238 Standard
Conformity to Standards
LV Directive
EN 60238 Standard
02100
­­­818
02187
LIGHTING
Edison lampholders
Porcelain E27 lampholder
02174
02174.D
02174.S
E27 lampholder, cylindrical porcelain body ø 43 mm. Fixing holes ø 4 mm, fixing centres 18 mm
E27 lampholder, cylindrical porcelain body ø 43 mm, straight fixing bracket. Fixing slots ø 4.5x6 mm, fixing centres 53 mm
E27 lampholder, cylindrical porcelain body ø 43 mm, 90° insulating fixing bracket, white. Fixing slots ø 4.5x9 mm
02174
02174.D
02174.S
Porcelain E27 lampholder
02182
02182.D
02164
E27 lampholder, cylindrical porcelain body ø 50 mm, insulated metal screw shell. Fixing holes ø 4.5 mm, fixing centres 38 mm
E27 lampholder, cylindrical porcelain body ø 50 mm, insulated metal screw shell, straight fixing bracket. Fixing slots ø 5.5x8 mm, fixing centres 52 mm
E27 lampholder, M10x1 nipple with locking screw, safety catch, porcelain. Not intended for holding lampshades
02182
02182.D
02164
Batten E27 lampholder
E27 lampholder, porcelain screw shell, pillar terminals straight base, porcelain. Fixing holes ø 4.5 mm, fixing centres 52 mm, base ø 63 mm
E27 lampholder, porcelain screw shell, pillar terminals, slanting base, porcelain. Fixing holes ø 4.5 mm, fixing centres 52 mm, max. base ø 69 mm
02250
E40 lampholder
02100
02187
Portalampade E40 con piastrina di fissaggio dritta, termoplastico, nero. Asole di fissaggio ø 5,2x7,5 mm interasse 52 mm. Massima temperatura d’impiego continuo del portalampade 240° C
Portalampade E40 con piastrina di fissaggio dritta, porcellana, bianco. Asole di fissaggio ø 5,2x7,5 mm interasse 52 mm
02100
* Only for Countries not member of the EU
02365
02187
­­­819
LIGHTING
ACCESSORIES
*02250
*02365