detailed profile

tesmec company profile
TESMEC Middle East is the sole agent, exclusive
supplier and distributor of TESMEC trenching machines
and equipment in Qatar and the Middle East.
Company History
1951: TESMEC SpA is established in Bergamo, Italy,
growing to become the world’s pre-eminent
manufacturer and supplier of trenching equiment.
2000: TESMEC SpA introduced their trenching
machines into Qatar.
2007: To meet the increasing market demand for
trenching in Qatar and the Middle East, in
January 2007 TESMEC Middle East Co.
W.L.L. was established as exclusive TESMEC
distributor for the Middle East.
TESMEC Guarantee
For over 50 years, customers have trusted TESMEC to
provide them with the world’s most reliable trenching
machines. Our service and support gives customers
the confidence to achieve their goals. Building long
term relationships and an unmatched commitment to
service is what makes TESMEC recognized around
the world.
TESMEC provides a complete trenching service using
the best equipment available. We strongly believe
our commitment to providing ruggedly engineered
machines is why TESMEC Middle East maintains
its position at the forefront of the highly competitive
Middle Eastern trenching industry.
We sincerely hope TESMEC Middle East can establish
a long standing, profitable business relationship for the
mutual benefit of both our companies.
tesmec company profile
TESMEC customers respond to our excellence in serving them by promoting the name
TESMEC Middle East as their supplier of choice. Continuous success is testament to our
staunch commitment to provide the highest levels of quality and service to our customers,
driven by a desire for excellence in everything we do.
Our Mission
At TESMEC Middle East, our business operations maintain strong, mutually beneficial
partnerships to support our customers changing long term needs. We strive to become
the leading trenching services company across Qatar and the Middle East through our
experienced team of professionals, unparalleled levels of service, and most importantly,
our powerful, trenching solutions.
Our Objectives
•
•
•
•
To
To
To
To
provide the highest quality trenching products and services
maintain a full inventory of parts, readily available
provide experienced, qualified construction staff
aim for the highest attainable profit, at lowest possible cost.
VISION, MISSION, OBJECTIVES
Our Vision
3
tesmec company profile
TESMEC Trenchers
Powerful Solutions for the toughest conditions
TESMEC Trenchers have cut through reinforced concrete and solid rock in the harshest er
of large size rock trenchers and surface miners for hard rock applications. Our manufacturing plants in Italy and Texas USA are certified to the highest quality standards, supplying a complete range of trenchers weighing from 15 to 150 tons.
All TESMEC machines offer advanced technology and state-of-the-art solutions to solve
any excavation or rock crushing problem, provide high productivity and cost effective
work.
TESMEC trenchers are ideally suited to a wide range of trenching applications:•
•
•
•
•
Oil and gas pipelines, water and sewer lines, drains.
Automatic laying of cables, conduits and plastic pipes.
Fiber optics and power cables.
Excavation and crushing of solid rock.
Reclamation of rocky soil to be used for agriculture.
PRODUCTS
TESMEC is a contractors dream. That is why we have become a global leader in the
trenches. From engines with the most fuel efficient technology, to fully modular machines
with specialized attachments, TESMEC supplies a quality range of the latest Chainsaw
and Rock Hawg trenchers, with “Bucket Wheel” digging attachments as well as surface
miners.
5
tesmec company profile
TESMEC Trencher Range
TESMEC TRS-950 SL
Made to dig…and dig…and dig
TRS-950 SL Specifications
GENERAL
Weight
Ground Pressure
48,500-57,320lbs
(22,000-25,000kg)
11.09-13 psi
(78-92 kg/sm.cm)
Transport Width
98” (250cm)
Transport Height
122” (310cm)
STANDARD FEATURES
Creep Control: Operator selectable digging pressure,
PRODUCTS
automatic operation
Engine doors with security locks
6
CE Certified
Stabilizers w/ Dirt drags
Flywheel Gearbox: Shaved, helical gearing, case hardened for extreme shock load
Vibration isolator mount: Used on cab, engine, radiator,
and silencer
ROPS cab w/ heat, air conditioning and pressurizer
Self-leveling Undercarriage, keeps machine level up to
20 degrees
ENGINE
Model
Cummins 6CTAA 8.3 Elite Turbo Aftercooled
Cylinders
6 In-Line
Maximum Load
2,390 RPM
Maximum Gross Horsepower
260 HP (194 kW)
Cooling Medium
Liquid
Air Cleaner
Dry type, 2 stage with dual precleaner and automatic
dust ejection
Oil Filter
Full flow canister
Fuel Filter
Primary and secondary
Electrical System
24V
tesmec company profile
Alternator
70 amp, 24V
Fuel Tank Capacity
two 68 gal. total 136 gal. (514 L)
HYDRAULIC SYSTEM
Type
Pressure and flow compensated (Load sensing)
Pump Flow Maximum
49 GPM (185 L/min.)
Maximum pressure
2495 PSI (172 Bar)
Oil Tank Capacity
79 gallons (300 L)
Oil Type
ATF type (F) or Tesmec approved equivalent
CRAWLER DRIVE
Dual path, hydrostatic drive, planetary transmission
capable of full counter rotation
Dual infinitely variable speed, forward and reverse
high range: 3.3 MPH (0-5.3 km/h)
low range: 1.2 MPH (0-1.9 km/h)
Automatic selection of transmission ratio
Integral parking and service brake: Spring applied,
hydraulic release, wet disc brake
CONVEYOR DRIVE
Belt Speed
infinitely variable 0-820 FPM (0-250m/min.)
Conveyor Belt
Conveyor belt width: 19.7” (50 cm)
Conveyor Length
98” (249 cm)
Discharge Height
49” (125 cm)
Discharge Direction
Right or left
TRUCK LOADING CONVEYOR
Reversible with hydraulic direction control
Discharge Direction
front of the machine
Belt Type
Vulcanized high resistance without joints, with chevron
pattern for higher transport capacity
Belt Speed
infinitely variable 0-656 ft/min (0-200 m/min)
Conveyor Belt Width
21.7” (55 cm)
Discharge Height
max 130» (330 cm)
TRENCHER DRIVE
Hydrostatic
One variable displacement pump and two motors
PRODUCTS
Single lever steering, single lever direction
7
tesmec company profile
Chainsaw Speed
infinitely variable, standard ratio 0-700 ft./min. (0-213
m/min)
Trench Depths
for 4’ (122 cm), 5’ (152 cm), 6’ (183 cm) and 8’ (245
cm) max booms
Trench Width
single chain boom, 12”-20” (30-51 cm)
double chain boom, 24”-26” (60-66 cm)
OPTIONS
Hydraulic Crumbshoe
Lateral scrapers
Automatic laying system for cable or PVC pipe
Top boom chain roller
Diesel refueling kit
Lighting kit for night-time operation
PRODUCTS
Laser system for depth control
8
Polyurethane or rubber track pads
Customer applications on request
PRODUCTS
tesmec company profile
11
tesmec company profile
TESMEC TRS-1150
It’s a powerhouse!
TRS-1150 Specifications
GENERAL
CHAINSAW
Weight
97,000-106,000 LB. (44,000-48,000 Kg)
Height
w/Cab - 138” (355 cm)
6 ft. boom: 34’-1” (10.95 m)
Transport length with Crumbshoe and counterweight:
8 ft. boom: 37’ -9” (11.55 m)
10 ft. boom: 40’-19” (12.25 m)
12 ft. boom: 42’-2” (12.87 m)
Width
100” (254 cm) with 23-5/8” (60 cm) Track Pads
PRODUCTS
ROCKSAW
12
Weight
93,000 LB. (42,000 Kg)
Height
w/cab 150” (381 cm)
Transport length with Crumbshoe
34’ (10.38 m)
Width
98-1/2” (250 cm) with 23 5/8” (60 cm) Track Pads
ROCK HAWG
Weight
117,000 lb. (53,000 Kg)
Height
w/Cab - 132” (335 cm)
Transport length
398” (1010 cm)
Width
114” (255-290 cm)
STANDARD FEATURES
Pressurized Cab ROPS with air conditioning, heating,
and sound suppression
Creep control: Operator selectable digging pressure,
automatic operation
Stabilizers with adjustable drags on Chainsaw and
Rocksaw models
Tool box with locking door
Engine doors with security locks
Fuel and Hydraulic Tank: Aircraft quality locking caps
Gearboxes, Fuel and Hydraulic Tanks: Pressurized with
5 PSI filtered breathers
Flywheel Gearboxes: shaved, helical gearing, case
hardened for extreme shock load
tesmec company profile
Vibration isolator mounts: used on engine, radiator, oil
cooler, exhaust silencer, and cab
Model
CAT C-13
Description
Turbocharged and After Cooled
Cylinders
6 In-Line
Maximum Load
2,150 RPM
Maximum Gross Horsepower
440 HP (328 kW)
Cooling Medium
Liquid
Cooling Rating
Adequate for 120° F (48.9°C) ambient air temperature
Air Cleaner
Dry type, 2 stage with dual precleaner
Oil Filter
Full flow canister
Fuel Filter
Primary and secondary
Electrical System
24V
Fuel Tank Capacity
280 gallons (1060 L)
Operating Range
13 hours
HYDRAULIC SYSTEM
Type
Pressure and flow compensated (Load sensing)
Pump Flow Maximum
Auxiliary pump flow maximum: 40 GPM (150 L/min.)
Auxiliary Pressure Setting
2500 PSI (172 Bar)
Oil Tank Capacity
100 gallons (378.5 L)
Oil Type
ATF, Type F
CRAWLER DRIVE
Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering,
single lever direction.
Infinitely variable speed: Forward and reverse,
High Range: 0 - 2.77 Mph (4.46 km/hr)
Low Range: 0 - 1.25 Mph (2.01 km/hr)
Integral parking and service brake: Spring applied,
hydraulic release, wet disc brake.
TRACKS
Overall Track Length
149” (378 cm)
Track Pad Type
Single, double, or triple grouser
Track Chain Type
Caterpillar 42/325 or equivalent
Track Chain Pitch
7.98” (202.8 cm)
PRODUCTS
ENGINE
13
tesmec company profile
Track Pad Width
22” (56 cm)
DRIVE
Belt Speed
Infinitely variable 0-820 FPM (0-250m/min)
Conveyor Belt
19.7” (50 cm)
Conveyor Length
98” (249 cm)
Discharge Height
49” (125 cm)
Discharge Direction
Right or left
CONVEYOR
(Chainsaw only)
Pressure and flow compensated pump with dual
hydraulic drive motors
Hydraulic conveyor fold
PRODUCTS
Description: Reversible and shiftable
Belt speed
Infinitely variable 0-750 FPM (0-229 M/min)
Conveyor belt width
30” (76 cm)
Conveyor length
156” (396 cm)
Discharge height
48-1/2” - 67-1/2” (123 - 171 cm)
Discharge direction
Right or left
DRIVE
CHAINSAW
14
Hydrostatic
Two pumps and two motors capable
of transmitting full engine horsepower
Chainsaw Speed
Infinitely variable digging chain speeds:
0 - 700 FPM (0 - 213 m/min.) standard
OPTIONAL
Low speeds: 0 – 550 FPM (0 – 168 m/min.)
Trench Depths
Depths: 6, 8, 10, 12, ft. (183, 244, 305, 366cm)
Trench Widths
Single chain 16” - 20” (41 - 51 cm)
Double chain: 26” - 36” (66 -92 cm)
Tesmec designed 6.5” pitch digging chain for single
chain configuration
Cutters
Rotary carbide tipped 1” (2.5 cm) shank diameter
OPTIONAL Cutters
Rotary carbide tipped 1-1/2” (3.8 cm) shank diameter
Tailwheel diameter
40” (101.6 cm)
Digging chain boom top roller
Hydraulic digging chain adjustment
ROCKSAW
tesmec company profile
Hydrostatic
Two pumps and two motors capable of transmitting full
engine horsepower
Chainsaw Speed
Infinitely variable digging wheel speeds: 0-800 FPM
(0-244 m/min.)
Depths
0-54” (0 cm-137 cm)
Widths
6”-14” (15.2 cm-35.6 cm)
Cutters
Rotary carbide tipped 1” (2.5 cm)shank diameter
OPTIONAL Cutters
Rotary carbide tipped 1-1/2” (3.8 cm) shank diameter
Hydrostatic
Two pumps and two motors capable of transmitting full
engine horsepower
Chainsaw Speed
Infinitely variable digging chain speeds: 0 – 213
m/min.
Depth
0 - 22” (0 - 60 cm)
Width
114” (255-290 cm)
Cutters
Rotary carbide tipped 1-1/2” (3.8 cm) shank diameter
Drum Diameter
71” (180 cm)
Hydraulic digging chain adjustment
OPTIONS
Work Light Package: 24V, for night use.
Laser control system
PRODUCTS
ROCK HAWG
15
PRODUCTS
tesmec company profile
17
tesmec company profile
TESMEC TRS-1475
When the going gets tough, one trencher keeps going
TRS-1475 Specifications
GENERAL
PRODUCTS
CHAINSAW
20
Weight
168,000 - 198,000 (76,204 - 89,811Kg)*
Chainsaw - dependent on configuration
Height
w/Cab -11’ 10” (3.6 m)
with cab elevated - 14’ 3” (4.3 m)
Transport length with
Crumbshoe
8 ft. boom: 42’ 2” (12.8 m)
10 ft. boom: 44’ 7” (13.6 m)
12 ft. boom: 47’ 2” (14.4 m)
14 ft. boom: 49’ 7” (15.41m)
16 ft. boom: 52’ 0» (15.8 m)
Transport Width
138” (351 cm) with 30” (76 cm) Track Pads
Transport Height
12’ (3.66 m) (over Cab, and single grouser pads).
ROCKSAW
Weight
169,000 (76,657 Kg) Rocksaw – dependent on
configuration
Height
w/Cab -11’ 10” (3.6 m)
with cab elevated - 14’ 3” (4.3 m)
Transport Length
39’ 8” (12.1 m)
Transport Width
138” (351 cm) with 30» (76 cm) Track Pads
Transport Height
12’ (3.66 m) (over Cab and single grouser pads)
ROCK HAWG
Weight
170,000 - 215,000 lbs (77,111 - 97,522 kg) dependent on configuration
Height
Tractor w/Cab -11’ 10” (3.6 m)
with cab elevated - 14’ 3” (4.3 m)
Transport Length
47’ 4” (14.4 m) with maximum counter weight
Transport Width
12’ 3” (3.73 m) with 30” (76 cm) Track Pads
Transport Height
14’ 2” (4.32 m) (over Wheel with Lower and Upper
buckets removed, and single grouser pads).
STANDARD FEATURES
Pressurized, Elevating ROPS Cab with air conditioning,
heating and sound suppression
Creep control: Operator selectable digging pressure,
automatic operation
Battery Box and Toolbox with locking door
Fuel and Hydraulic Tank: Aircraft quality locking caps
Flywheel Gearbox and Hydraulic Tanks: Pressurized
with 5 PSI filtered breathers
Flywheel Gearbox: shaved, helical gearing, case
hardened for extreme shock load
Vibration isolator mount: used on engine, radiator, oil
cooler, and exhaust silencer
Stabilizers / Dirt Drags: Automatically adjust to terrain
changes
Lights: 24 Volt forward facing
Digging Chain Boom Top Roller
Hydraulic Digging Chain Adjustment
Model
Caterpillar C16 DITA ATAAC**
Description
Turbocharged and air to air after cooled
Cylinders
6 In-Line
Maximum Load
2,100 RPM
Maximum Gross Horsepower
at no load
600 HP (448 kW)
Cooling Medium
Extended Life Coolant
Cooling Rating
Adequate for 130 Deg F (54 Deg C) ambient air
temperature
Air Cleaner
Dry type, Centrifugal precleaner with primary and
secondary filters
Oil Filter
Full flow canister
Fuel Filter
Primary and secondary
Electrical System
24V Starting. 12V Controls
Fuel Tank Capacity
360 gallons (1363 litres)
Fuel Consumption
29.3 gal/hr. (111 l/hr) at full load.
Operating Range
12.3 hours
CRAWLER DRIVE
Dual path, hydrostatic drive, planetary transmissions
capable of full counter rotation with single lever
steering, single lever direction
Infinitely variable speed: Forward and reverse.
High Range: 0 – 1.62 Mph (2.61 km/hr)
Low Range: 0 – .81 Mph (1.30 km/hr)
Integral parking brake: Spring applied, hydraulic
release, wet disc brake.
TRACKS
Overall Center to Center Track
Length
159” (404 cm)
PRODUCTS
ENGINE
21
tesmec company profile
Track Pad Type
Single, double or triple grouser
Track Chain Type
Caterpillar 62/350**
Track Chain Pitch
9” (22.86 cm)
Track Pad Width
30” (76.2 cm)
PRODUCTS
CONVEYOR
22
Hydrostatic
One pump and two motors
Description
Reversible and shiftable
Belt speed
Infinitely variable 0-900 FPM (0-274.3 M/min.)
Conveyor belt width
36” (91.4 cm)
Conveyor length
14’ 9” (449.6 cm)
Discharge height
7’ 7” (231.1 cm)
Discharge direction
Right or left
TRENCHER DRIVE
CHAINSAW
Hydrostatic
Four pumps and two motors capable
of transmitting full engine horsepower
Depths
8’ through 16’ (2.44 metres through 4.88 metres)
Widths
28”-48” (71-122 cm) Maximum 12’ (3.6 metres)
28”-42” (71-107 cm) Maximum 14’ (4.3 metres)
28”-36” (71-91 cm) Maximum 16’ (4.9 metres)
Three Operator Selectable Digging Speed Ranges:
0-375 FRM (0-114 m/min.)
0-525 FPM (0-160 m/min.)
0-675 FPM (0-206 m/min.)
Tailwheel diameter
48” (122 cm)
Headshaft Diameter
12-1/8” (30.8 cm)
Cutters
Rotary carbide tipped 1-1/2» (3.8 cm) shank diameter
Digging Chain
D9L
Optional Hydraulic Crumbshoe
ROCKSAW
Hydrostatic
Four pumps and two motors capable of transmitting full
engine horsepower
Digging Speed
Three Operator Selectable Digging Speed Ranges with
60” depth wheel:
0-600 FRM (0-183 m/min.)
0-800 FPM (0-244 m/min.)
0-1000 FPM (0-305 m/min.)
Depths
60” (152 cm)
Widths
8” (20.3 cm) to 16” (40.6) in ½” (1.3 cm) increments
tesmec company profile
Cutters
Rotary carbide tipped 1-1/2” (3.8 cm) shank diameter
Optional Hydraulic Crumbshoe
Hydrostatic
Four pumps and two motors capable of transmitting full
engine horsepower
Digging Speed
Three Operator Selectable Digging Speed Ranges:
0-375 FRM (0-114 m/min.)
0-525 FPM (0-160 m/min.)
0-675 FPM (0-206 m/min.)
Depth
24” (61 cm)
Width
12’6” (3.81m)
Cutters
Rotary carbide tipped 1-1/2” (3.8 cm)
shank diameter
Drum Tip Diameter
85.9” (218 cm)
Headshaft Diameter
12-1/8” (30.8 cm)
Chain
D9L
BUCKET
Hydrostatic
Four pumps and two motors capable of transmitting full
engine horsepower
Depths
3’ through 10’ (0.91 m through 3.04 m)
Width
36”-48” (91-12 2 cm) for rock configuration –
27 buckets;
36”-72” (91-183 cm) for dirt configuration –
18 buckets.
Digging Speed
Three Operator Selectable Digging Speed Ranges:
0-231 FPM (0-70 m/min.) (4.4 RPM)
0-319 FPM (0-97 m/min.) (6.1 RPM)
0-408 FPM (0-124 m/min.) (7.8 RPM)
Cutters
Spade type teeth, or rotary carbide tipped 1-1/2” (3.8
cm) shank diameter teeth, or ESCO type teeth.
Digging Rims
Single segmented for Dirt or light rock. Double segmented for Rock bucket set-up (27 buckets). 2” plate
main rims with multiple drilled false rims to accept 18 or
27 buckets.
Bucket Style
Semi-round style
OPTIONS
Cab Anti-Vandalism Window Covers
Work Light Package: 24V, for night use
Air Compressor
Laser Control System Pre-Wire
Hydraulic Crumbshoe
PRODUCTS
ROCK HAWG
23
PRODUCTS
tesmec company profile
25
tesmec company profile
TESMEC TRS-1675
Setting a Tough New Worldwide Standard
TRS-1675 Specifications
GENERAL
CHAINSAW
Weight
10’ (3.0 m) Boom with 28” (71.1 cm)
Rotary Cutters and Crumbshoe: 232,000 Lbs
(105,233 Kg)
Maximum Configuration Weight: 268,000 Lbs
(121,563 Kg)
Height
w/Cab: 13’-3” (4.04 m)
with cab elevated: 16> 3” (4.95 m)
Transport length with 20’
Boom and Guard
59’-6” (18.13 metres)
144” (3.66 metres) with 30” (76.2 cm) Track Pads
BUCKET
Weight
Approx. 259,000 Lbs. dependent on configuration
Height
tractor w/cab-13’ 3” (4.0 m)
with cab elevated-16’ 3” (4.95 m).
Transport Length
54’ 0” (16.45 m)
Transport Width
13’ 2” (4.0 m) with 30” (76cm) Track Pads.
Transport Height
16’ 9” (5.1 m) (over wheel with lower and upper buckets removed and single grouser pads).
ROCK HAWG
Weight
340,000 Lbs. (154,360 Kg) Rock Hawg
Height
w/Drum Guard 14’ 5” (4.40m),
with cab elevated - 16’ 3” (4.95 m).
Transport Length
W/Drum Guard 45> 4” (13.82 m).
Transport Width
168” (427 cm)
Transport Height
13’ 5” (4.10 m) (over cab and single grouser pads).
STANDARD FEATURES
Pressurized, cab with air conditioning, heating, and
sound suppression
Elevating cab module with roll over protection (ROPS)
Creep control: Operator selectable digging pressure,
automatic operation
Battery Box and Toolbox with locking door
Engine doors with security locks
PRODUCTS
Width
27
tesmec company profile
Fuel and Hydraulic Tank: Aircraft quality locking caps
Gearboxes and Hydraulic Tanks: Pressurized with
5 PSI filtered breathers
Flywheel Gearboxes: shaved, helical gearing, case
hardened for extreme shock ability
Vibration isolator mount: used on engine, radiator, oil
cooler, and exhaust silencer
PRODUCTS
ENGINE
28
Model
Caterpillar 3412E
Description
Turbocharged
Cylinders
V-12
Maximum Load
2,100 RPM
Maximum Gross Horsepower
at no load
760 (567 kW)
Cooling Rating
Adequate for 125º F (51.7º C) ambient air temperature
Air Cleaner
Dry type, Centrifugal precleaner with primary and
secondary filters
Electrical System
24V Starting. 12V Controls
Fuel Tank Capacity
430 gal. (1,630 L)
Fuel Consumption
41.3 gal/hr. (156 l/hr.)
Operating Range
10.4 hours
OPTIONAL ENGINE
Model
Cummins QSK-19
Description
Turbocharged and after cooled
Cylinders
6 In-Line
Maximum Load
2,100 RPM
Maximum Gross Horsepower
at no load
760 (567 KW)
Cooling Rating
Adequate for 125 (51.7°C) ambient air temperature
Air Cleaner
Dry type, 2 stage with dual precleaner
Electrical System
12V/24V
Fuel Tank Capacity
430 gal. (1630 litres)
Fuel Consumption at full load
36 gal./hr. (136 l/hr.)
Operating Range
11.9 hour
CRAWLER DRIVE
tesmec company profile
Dual path, hydrostatic drive, planetary
transmissions capable of full counter rotation
with single lever steering, single lever direction
Infinitely variable speed: Forward and reverse
High Range: 0 - 2.1 Mph (3.36 km/hr)
Low Range: 0 - 1.1 Mph (1.76 km/hr)
Integral parking and service brake: Spring applied,
hydraulic release, wet disc brake.
Overall Center to Center Track
Length
188” (477.5 cm)
Track Pad Type
Double or triple grouser
Track Chain Type
Caterpillar 2458**
Track Chain Pitch
10.25” (26 cm)
Track Pad Width
30” (76.2 cm)
CONVEYOR
Hydrostatic
One pump and two motors
Description
Reversible and shiftable
Belt speed
Infinitely variable 0-1000 FPM (0-274.3 M/min.)
Discharge direction
Right or left
Chainsaw
Conveyor belt width
42” (107 cm)
Conveyor length
6’ 0» (4.87 m) or 20’ 0” (6.09 m)
Conveyor height
8’ 1” (2.46 m) or 9’ 10” (3.00 m)
Bucket
Conveyor belt width
48” (123 cm)
Conveyor length
19’ 0” (5.5 m)
Conveyor height
5’ 1” (1.5 m)
TRENCHER DRIVE
CHAINSAW
Hydrostatic
Four pumps and two motors capable of transmitting full
engine horsepower
Depths
10’ through 24’ (3.05 M through 7.3 M)
Widths
Depths:
28”-48” (71-122 cm) Maximum 26’ (7.3 M)
40»-52» (102-132 cm) Maximum 18’ (5.5 M)
54”-60” (137-152 cm) Maximum 16’ (4.8 M)
PRODUCTS
TRACKS
29
tesmec company profile
Three Operator Selectable Digging Speed Ranges:
0-375 FPM (0-114 m/min.)
0-540 FPM (0-164 m/min.)
0-700 FPM (0-213 m/min.)
Hydraulic Digging Chain Adjustment
Top Boom Rollers
Conveyor Fold: Hydraulic winch
Tailwheel diameter
48” (122 cm)
Headshaft Diameter
12.5” (31.8 cm)
Cutters
Rotary carbide tipped 1-1/2” (3.8 cm)
shank diameter
Digging Chain
67/D9N
Optional Hydraulic Crumbshoe
PRODUCTS
BUCKET
30
Hydrostatic
Four pumps and two motors capable of transmitting full
engine horsepower.
Digging Speed
Three Operator Selectable Digging Speed Ranges:
0-6.5 RPM
0-9.2 RPM
0-11.9 RPM
Digging Rim
Double (forged steel) segmented
2” plate main rim multiple drilled false rims to
accept 18 or 27 buckets.
Buckets
18 buckets, 1-1/2” thick plate (0.59 cm)
Depths
3’-7” (1.09 m) minimum w/boom level through 10>
(3.04 m)
Widths
3’-4” (1.0 m) through 6’-9” (2.0 m)
Cutters
Rotary carbide tipped 1-1/2” (3.8 cm) shank diameter.
Bucket backs are standard, chain-backs optional
Other cutting tools and holders available to suit various
conditions.
ROCK HAWG
Hydrostatic
Four pumps and two motors capable of transmitting full
engine horsepower
Digging Speed
Three Operator Selectable Digging Speed Ranges:
0-375 FPM (0-114 m/min.)
0-540 FPM (0-164 m/min.)
0-700 FPM (0-213 m/min.)
Depth
46” (116.8 cm)
Width
14’ (4.27 m)
Cutters
Rotary carbide tipped 1-1/2” (3.8 cm) shank diameter.
Drum Tip Diameter
98” (249 cm)
tesmec company profile
Headshaft Diameter
12-1/8” (30.8 cm)
Chain
D9N
OPTIONS
Cab Anti-Vandalism Window Covers
Work Light Package: 24V, for night use
Air Compressor
Laser Control System Pre-Wire
Twin Hose Reel Package: Connections to power hydraulic tools.
PRODUCTS
Increased cooling capacity for high temperature ambient application.
31
PRODUCTS
tesmec company profile
33
tesmec company profile
Maintenance and After Sales
TESMEC Middle East maintains a USD 2 million inventory of spare parts in our stateof-the-art warehouse to ensure a fast response to our customers. In addition to our
high-quality certificated After Sales service, we operate a mobile service truck manned
by expert technicians and mechanics for all servicing needs.
Contact TESMEC Middle East
Telephone: Fax: Email: Website: +974 435 57 54
+974 435 82 68
info@tesmec-me.com
www.tesmec-me.com
CONTACT US
TESMEC Middle East Co. W.L.L
Al Nasr Street,
Head Office / Office No. 7, 2nd Floor (above Creative Closets)
P.O. Box 1985, Doha - Qatar
35
CONTACT US
tesmec company profile
36