Fittings - Bergstrom
Transcription
2 Fittings Air Conditioning & Heating Replacement Parts Fittings A/C Fittings. . . . . . . . . . . . . . . . . . 294 Beadlock Flare...................................... 294 Beadlock O-Ring R-12 Service Port....... 295 Beadlock O-Ring................................... 295 Beadlock Male Insert O-Ring................. 297 Beadlock Springlock.............................. 297 Beadlock Splicer................................... 299 Assortment Beadlock Fittings................ 300 Hose Assembly & Repair Kit.................. 304 Atco Air O Crimp Fittings . . . . . . 305 AIR-O-CRIMPTM Fittings........................ 305 AIR-O-CRIMPTM Accessories................. 308 Atco Air-O-Crimp Hose (3800)............... 308 AIR-O-CRIMP Assembly........................ 309 Hose Crimping Procedures. . . . 311 Beadlock Fitting Identification. . 312 Bulkhead Adapters, Tubing & Drain Hose. . . . . . . . . . . . . . . . . . . . . . . 319 Bulkhead Adapters................................ 319 Drain Hose & Accessories..................... 319 Insulating Tubing (1/4” Wall).................. 319 Heater Hose.......................................... 319 Flexible Ducting, Clamps & Hose Adapters. . . . . . . . . . . . . . . . . . Hose Clamps............................................... Duct Hose Adapters..................................... Hose/Duct Clamp........................................ Bulk Flexible Ducting................................... Wire Clips & Ties......................................... Hoses, Hose Ferrules & Crimping Accessories. . . . . . . . . . . . . . 293 Goodyear (Galaxy) Hose 4826.............. 293 Hose Crimping Accessories................... 293 Male O-Ring.......................................... 312 Female O-Ring...................................... 312 Male Insert O-Ring................................ 312 O-Rings................................................ 312 Female Flare......................................... 313 Male Flare............................................. 313 Hose End Sizes..................................... 313 Refrigerant Hose Sizes.......................... 314 Beadlock............................................... 314 Torque Recommendations..................... 314 O-Rings. . . . . . . . . . . . . . . . . . . . . 315 O-Ring Specifications*.......................... 316 O-Ring Assortment Kits......................... 317 O-Ring Rubber Material Data................. 318 Call: (800) 499-6849 for Technical Assistance BUS 292 2 Hoses, Hose Ferrules & Crimping Accessories Goodyear (Galaxy) Hose 4826 This hose meets J2064 specification. Size No. 6 No. 8 No. 10 No. 12 No. 6 No. 8 No. 10 No. 12 Note: For use with steel or aluminum Push‑On or Beadlock (Bubble Crimp) type fittings only! Note: DS - Hose is bulk direct ship. • Easy Couplability Internal rubber layer makes coupling simple, assuring better assembly integrity while reducing the risk of refrigerant loss around the fittings. • Reduced Ozone Permeation Fittings Internal Nylon Barrier hose is specifically designed to reduce the permeation level of ozone depleting refrigerant and chemicals in heavy duty air conditioning systems. • Universal Compatibility Extensive testing has shown 4826 Barrier Hose to be compatible with R-12, R-134a and Ternary Blends. • Low Volumetric Expansion I.D. 5/16” 13/32” 1/2” 5/8” 5/16” 13/32” 1/2” 5/8” O.D. 3/4” 29/32” 1” 1 1/8” 3/4” 29/32” 1” 1 1/8” Length 50 FT. 50 FT. 50 FT. 50 FT. 825 FT. 725 FT. 700 FT. 500 FT. Part No.* 2610001 2610002 2610003 2610004 2610001-DS 2610002-DS 2610003-DS 2610004-DS * When placing order for hose, reference order in quantity of feet. Hose sold in 50 foot rolls or bulk, in quantities listed above • • • • • • • • Dimensionally Stable Flexible Easy to Route Reduction in Noise & Vibration J51 All Outside Diameters Tube: Polychloropene Barrier Reinforcement: Synthetic Yarn Cover: EPDM Hose Crimping Accessories Part No. 2610005 Atco Crimper Hose Kit (Model # 3710) Features: • • • • • • • • • • Portable, hand operation OE style triple bubble crimp Quick-change dies, no tools required to change sizes Heavy duty construction for use with air impact wrench Light weight for easy handling, less than 6 lbs. Capable of crimping under-hood applications Six die sets included to crimp all four sizes of BOTH 2-braid and reduced barrier hose Unit can be bench mounted Shipped in a custom carrying case with instructions No electrical required Atco Crimper Hose Kit Complete Kit for air impact wrench operation - 100 PSIG Max 293 (800) 499 -6849 • www.kysorhvac.com Beadlock Flare A/C Fittings Fitting Size No. 6 No. 8 No. 10 No. 10 Thread Size 5/8”-18 3/4”-16 7/8”-14 7/8”-14 90° Male Flare Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” No. 10 1/2” Part No. 2612101 2612102 2612103 2622103V 90° Female Flare Fitting Size Thread Size No. 6 No. 8 No. 10 No. 12 No. 10 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 7/8”-14 Fitting Size No. 6 No. 8 No. 10 Thread Size 5/8”-18 3/4”-16 7/8”-14 Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” Part No. 2621191V 2621192V 2621193V Fittings Straight Female Flare Straight Male Flare Hose Size Hose I.D. No. 6 No. 8 No. 10 No. 12 No. 10 5/16” 13/32” 1/2” 5/8” 1/2” Part No. 2612191 2612192 2612193 2612194 2622193V Fitting Size No. 6 No. 10 Thread Size 5/8”-18 7/8”-14 Hose Size Hose I.D. No. 6 5/16” No. 10 1/2” Part No. 2621101V 2621103V 45° Male Flare Fitting Size No. 6 1 Thread Size 5/8”-18 2 Hose Size Hose I.D. No. 6 5/16” Part No. 2621151V Use Goodyear Galaxy approved hose 4826 (800) 499 -6849 • www.kysorhvac.com 294 2 A/C Fittings Beadlock O-Ring R-12 Service Port 90° Female O-Ring w/R-12 Port Fitting Size No. 6 No. 8 No. 10 No. 8 Fittings V Thread Size 5/8”-18 3/4”-16 7/8”-14 3/4”-16 Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” No. 8 13/32” Straight Female O-Ring w/R-12 Port Part No. 2622491V 2622492V 2622493V 2614014 Fitting Size No. 6 No. 8 No.10 No. 6 Thread Size 5/8”-18 3/4”-16 7/8”-14 5/8”-18 Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” No. 6 5/16” 2622401V 2622402V 2622403V 2614012 Part No. Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” No. 12 5/8” No. 8 13/32” No. 6 5/16” No. 12 5/8” 2611201 2611202 2611203 2611204 2611206 2611207 2611208 Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” No. 12 5/8” No. 12 5/8” 2611151 2611152 2611153 2611154 2611156 Indicates Aluminum fitting Beadlock O-Ring Straight Female O-Ring Straight Male O-Ring Fitting Size Thread Size Hose Size Hose I.D. No. 6 5/8”-18 No. 6 5/16” No. 8 3/4”-16 No. 8 13/32” No. 10 7/8”-14 No. 10 1/2” No. 12 1 1/16”-14 No. 12 5/8” No. 8 M20 x 1.5 metric No. 8 13/32” No. 6 5/8”-18 No. 8 13/32” No. 8 3/4”-16 No. 10 1/2” No. 10 7/8”-14 No. 12 5/8” No. 8 3/4”-16 No. 6 5/16” No. 12 1 1/16”-14 No. 10 1/2” Part No. 2612201 2612202 2612203 2612204 2612206 2612207 2612208 2612209 2612210 2612211 45° Female O-Ring Fitting Size No. 6 No. 8 No. 10 No. 12 No. 6 No. 10 295 Thread Size 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 5/8”-18 7/8”-14 Fitting Size No. 6 No. 8 No. 10 No. 12 No. 6 No. 8 No. 10 Thread Size 5/8”-18 3/4”-16 7/8”-18 1 1/16”-16 5/8”-18 3/4”-18 7/8”-18 Part No. 45° Male O-Ring Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” No. 12 5/8” No. 8 13/32” No. 12 5/8” Part No. 2612251 2612252 2612253 2612254 2612257 2612256 Fitting Size No. 6 No. 8 No. 10 No. 12 No. 10 Thread Size 5/8”-18 3/4”-16 7/8”-18 1 1/16”-16 7/8”-18 (800) 499 -6849 • www.kysorhvac.com Part No. Beadlock O-Ring A/C Fittings Fitting Size No. 6 No. 8 No. 10 No. 12 No. 6 No. 8 No. 10 No. 8 No. 12 90° Male O-Ring Thread Size 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 5/8”-18 3/4”-16 7/8”-14 3/4”-16 1 1/16”-14 Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” No. 12 3/4” No. 8 13/32” No. 10 1/2” No. 12 5/8” No. 6 5/16” No. 10 1/2” Part No. Fitting Size Thread Size 2612291 2612292 2612293 2612294 2612296 2612297 2612298 2612299 2612212 No. 6 No. 8 No. 10 No. 12 No. 6 No. 8 No. 10 5/8”-18 3/4”-16 7/8”-18 1 1/16”-16 5/8”-18 3/4”-18 7/8”-18 Straight Female O-Ring with R-134a Port R-134a Port 16mm 16mm 13mm 13mm M10 M10 M10 M10 Fitting Size No. 6 No. 8 No. 10 No. 12 No. 6 No. 8 No. 10 No. 10 Thread Size 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 5/8”-18 3/4”-16 7/8”-14 7/8”-14 Hose Size No. 6 No. 8 No. 10 No. 12 No. 6 No. 8 No. 10 No. 12 Fitting Size No. 6 No. 6 No. 8 No. 10 No. 12 No. 10 Thread Size 5/8”-18 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 7/8”-14 No. 6 No. 8 No. 10 No. 12 No. 8 No. 6 No. 12 5/16” 13/32” 1/2” 5/8” 13/32” 5/16” 5/8” Part No. 2611191 2611192 2611193 2611194 2611196 2611197 2611198 90° Female O-Ring with R-134a Port Hose I.D. 5/16” 13/32” 1/2” 5/8” 5/16” 13/32” 1/2” 5/8” Part No. 2612501 2612502 2612503 2612504 2612511 2612512 2612513 2612514 45° Female O-Ring with R-134a Port R-134a Port 16mm 16mm 16mm 13mm 13mm 13mm Hose Size Hose I.D. Fittings 90° Female O-Ring 2 R-134a Port 16mm 16mm 13mm 13mm 13mm M10 M10 M10 M10 Fitting Size No. 6 No. 8 No. 10 No. 12 No. 10 No. 6 No. 8 No. 10 No. 12 Thread Size 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 7/8”-14 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 Hose Size No. 6 No. 8 No. 10 No. 12 No. 12 No. 6 No. 8 No. 10 No. 12 Hose I.D. 5/16” 13/32” 1/2” 5/8” 5/8” 5/16” 13/32” 1/2” 5/8” Hose Size 5/16” 13/32” 1/2” 5/8” Hose I.D. No. 6 No. 8 No. 10 No. 12 Part No. 2612591 2612592 2612593 2612594 2612596 2612597 2612598 2612599 2612590 90° Male O-Ring Fitting Assembly Hose Size No. 6 No. 6 No. 8 No. 10 No. 12 No. 12 Hose I.D. 5/16” 5/16” 13/32” 1/2” 5/8” 5/8” Part No. 2622551V 2612551 2612552 2612553 2612554 2612556 R-134a Port 16mm 16mm 13mm 13mm Fitting Size No. 6 No. 8 No. 10 No. 12 Thread Size No. 6 No. 8 No. 10 No. 12 (800) 499 -6849 • www.kysorhvac.com Part No. 2611591 2611592 2611593 2611594 296 2 A/C Fittings Beadlock Male Insert O-Ring 45° Male Insert O-Ring Fitting Size No. 6 No. 8 No. 10 Thread Size 5/8”-18 3/4”-16 7/8”-14 90° Male Insert O-Ring Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” Part No. 2611351 2611352 2611353 Fittings Straight Male Insert O-Ring Fitting Size No. 6 No. 8 No. 10 No. 12 Thread Size 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 Fitting Size No. 6 No. 8 No. 10 Thread Size 5/8”-18 3/4”-16 7/8”-14 Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” Part No. 2611391 2611392 2611393 In-Line Access Valve R-134a Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” No. 10 1/2” No. 12 5/8” Part No. 2611301 2611302 2611303 2611304 Access Valve 16mm 16mm 13mm 13mm M10 Fitting Size No. 6 No. 8 No. 10 No. 12 No. 8 Thread Size No. 6 No. 8 No. 10 No. 12 No. 8 Hose Size 5/16” 13/32” 1/2” 5/8” 13/32” Hose I.D. 5/16” 13/32” 1/2” 5/8” 13/32” Part No. 2610901 2610902 2610903 2610904 2610905 Indicates Aluminum fitting V Beadlock Springlock Male Straight Springlock Fitting Size No. 6 No. 8 No. 10 No. 12 Hose Size No. 6 No. 8 No. 10 No. 12 45° Female Springlock Hose I.D. 5/16” 13/32” 1/2” 5/8” Part No. 2621601 2621602V 2621603V 2621604V V Fitting Size No. 6 No. 12 Hose Size No. 6 No. 12 Hose I.D. 5/16” 5/8” Indicates Aluminum fitting V 297 (800) 499 -6849 • www.kysorhvac.com Part No. 2622651V 2622654V Beadlock Springlock A/C Fittings 90° Female Springlock Hose Size No. 6 No. 8 Hose I.D. 5/16” 13/32” Part No. 2621651V 2621652V Hose Size No. 6 No. 8 No. 10 No. 12 Hose I.D. 5/16” 13/32” 1/2” 5/8” Part No. 2621691 2621692V 2621693V 2621694V V Hose Size No. 12 Hose I.D. 5/16” 1/2” 5/8” Part No. 2622691V 2622693V 2622694V Hose I.D. 5/8” Fitting Size No. 6 No. 8 No. 10 No. 12 Hose Size No. 6 No. 8 No. 10 No. 12 Hose I.D. 5/16” 13/32” 1/2” 5/8” Part No. 2622601V 2622602V 2622603V 2622604V Female Straight Springlock Step Up/Step Down 90° Female Springlock Step Up/Step Down Fitting Size No. 10 Hose Size No. 6 No. 10 No. 12 Female Straight Springlock 90° Male Springlock Fitting Size No. 6 No. 8 No. 10 No. 12 Fitting Size No. 6 No. 10 No. 12 Fittings 45° Male Springlock Fitting Size No. 6 No. 8 2 Part No. 2622697 V Fitting Size No. 8 Hose Size No. 6 Hose I.D. 5/16” Part No. 2622606V Indicates Aluminum fitting V (800) 499 -6849 • www.kysorhvac.com 298 2 A/C Fittings Beadlock Springlock Straight Male Springlock Step Up/Step Down 45° Male Springlock Step Up/Step Down Fitting Size No. 8 Hose Size No. 6 Hose I.D. 5/16” Part No. 2621656V Fitting Size No. 8 No. 10 Hose Size No. 6 No. 12 Hose I.D. 5/16” 5/8” Part No. 2621606V 2621607V Fittings 45° Female Springlock Step Up/Step Down 90° Male Springlock Step Up/Step Down Fitting Size No. 8 No. 10 Hose Size No. 6 No. 12 Hose I.D. 5/16” 5/8” Part No. 2621696 2621697V V Fitting Size No. 8 No. 10 Hose Size No. 6 No. 12 Hose I.D. 5/16” 5/8” Part No. 2622656V 2622657V Tube Size No. 6 No. 8 No. 10 No. 12 No. 12 Tube Size No. 6 No. 8 No. 10 No. 12 No. 10 2610771 2610772 2610773 2610774 2610776 Indicates Aluminum fitting V Beadlock Splicer 90° Splicer Hose Size From No. 10 V 299 Tee Splicer Hose Size To No. 10 Hose I.D. From 1/2” Hose I.D. To 1/2” Part No. 2620793V Tube Size No. 6 No. 8 No. 10 No. 12 No. 12 Indicates Aluminum fitting (800) 499 -6849 • www.kysorhvac.com Part No. Beadlock Splicer A/C Fittings 2 Straigth Splicer V Hose Size To No. 6 No. 8 No. 10 No. 12 No. 8 Hose I.D. From 5/16” 13/32” 1/2” 5/8” 5/16” Hose I.D. To 5/16” 13/32” 1/2” 5/8” 13/32” Part No. 2610777 2610778 2610779 2610780 2614015 Fittings Hose Size From No. 6 No. 8 No. 10 No. 12 No. 6 Indicates Aluminum fitting Assortment Beadlock Fittings 90° O-Ring Fitting Assembly R-134a Port 16mm Switch Port M10 Fitting Size No. 8 90° O-Ring Fitting Assembly Thread Size 3/4”-16 Hose Size No. 8 Part No. 2612510 90° O-Ring Fitting Assembly R-134a Port 16mm Switch Port M10 Fitting Size No. 8 R-134a Port 16mm Switch Port M10 Fitting Size No. 8 Thread Size 3/4”-16 Hose Size No. 8 Thread Size 3/4”-16 Hose Size No. 8 Part No. 2612515 90° O-Ring Fitting Assembly Thread Size 3/4”-16 Hose Size No. 8 Part No. 2612516 R-134a Port 16mm Switch Port M10 Fitting Size No. 8 (800) 499 -6849 • www.kysorhvac.com Part No. 2612517 300 2 A/C Fittings Assortment Beadlock Fittings 90° Male O-Ring Fitting Assembly R-134a Port 16mm 16mm Switch Port M10 M10 Fitting Size No. 10 No. 10 Straight Male O-Ring Fitting Assembly Thread Size 7/8”-18 7/8”-18 Hose Size No. 10 No. 12 Part No. 2611598 2611596 Fittings Female O-Ring Return Bend Fitting Size No. 6 Thread Size 5/8”-18 Hose Size Hose I.D. No. 6 5/16” 301 Thread Size 5/8”-18 3/4”-16 Hose Size Hose I.D. No. 6 5/16” No. 8 13/32” Switch Port No. 6 No. 8 No. 10 No. 12 M10 M10 Fitting Size No. 6 No. 8 No. 10 No. 12 No. 10 No. 10 Thread Size 5/16” 13/32” 1/2” 5/8” 7/8”-18 7/8”-18 Hose Size No. 6 No. 8 No. 10 No. 12 No. 10 No. 12 Part No. 2611501 2611502 2611503 2611504 2611506 2611507 Male O-Ring Return Bend Part No. 2612281 90° Male Insert O-Ring Bulkhead Fitting Size No. 6 No. 8 R-134a Port 16mm 16mm 13mm 13mm 16mm 16mm Fitting Size No. 6 Thread Size 5/8”-18 Hose Size Hose I.D. No. 6 5/16” Part No. 2611281 90° Female O-Ring w/R-134a Port Part No. 2613891 2613892 R-134a Port 13mm Switch Port No. 10 Fitting Size 7/8”-14 Thread Size No. 12 (800) 499 -6849 • www.kysorhvac.com Hose Size 5/8” Part No. 2612518 Assortment Beadlock Fittings A/C Fittings Switch Port M12 x 1.5 Fitting Size No. 10 Thread Size 7/8”-18 90° Female O-Ring w/R-134a Port Hose Size No. 12 Hose I.D. 5/8” Part No. 2611597 No. 7 Straight Male O-Ring Special Dryer Connections Fitting Size No. 7 Thread Size 11/16”-16 Hose Size Hose I.D. No. 6 5/16” Fitting Size No. 10 Thread Size 7/8”-14 Hose Size No. 12 Fitting Size No. 6 No. 10 Thread Size 5/8”-18 7/8”-14 Hose Size No. 6 No. 12 Hose I.D. 5/16” 5/8” Part No. 2614013 2612519 Straight Female O-Ring w/R-134a Port and Metric Port Part No. 2611205 Straight Female O-Ring w/R-134a Port R-134a Port 13mm R-134a Port 16mm 13mm Fittings 90° Male O-Ring w/Metric Port 2 R-134a Port 16mm Fitting Size M10 x 1.25 Thread Size No. 8 Hose Size 3/4”-16 Hose I.D. No. 8 Part No. 2612508 No. 7 90° Male O-Ring Special Dryer Connections Hose I.D. 5/8” Part No. 2612506 Fitting Size No. 7 Thread Size 11/16”-16 Hose Size Hose I.D. No. 6 5/16” (800) 499 -6849 • www.kysorhvac.com Part No. 2611295 302 2 A/C Fittings Assortment Beadlock Fittings 45° Male O-Ring w/16mm Port Switch Port 16mm 16mm Fitting Size No. 6 No. 8 Thread Size 5/8”-18 3/4”-16 45° Male O-Ring w/13mm Port Hose Size No. 6 No. 8 Hose I.D. 5/16” 13/32” Part No. 2611551 2611552 Fittings 45° Male O-Ring w/Metric Port Switch Port M12 x 1.5 Fitting Size No. 10 Thread Size 7/8”-18 Switch Port 13mm 13mm Fitting Size No. 10 No. 12 Thread Size 7/8”-14 1 1/16”-14 303 Hose Size No. 6 No. 8 No. 10 No. 12 No. 12 Hose Size No. 10 No. 12 Hose I.D. 1/2” 5/8” Quick Disconnect Coupler Hose Size No.12 Hose I.D. 5/8” Part No. 2611556 Fitting Size 5/8”-18 Straight Weld-On Fitting Size No. 6 No. 8 No. 10 No. 12 No. 10 No Photo Available Thread Size 3/8” Tube 1/2” Tube 5/8” Tube 3/4” Tube 5/8” Tube Part No. 2614016 2614017 2614018 2614019 2614020 (800) 499 -6849 • www.kysorhvac.com Part No. 2650001 Part No. 2611553 2611554 Hose Assembly & Repair Kit A/C Fittings 2 Description No. 6 Ferrule No. 8 Ferrule No. 10 Ferrule No. 12 Ferrule No. 1 Retainer Ring No. 2 Retainer Ring No. 3 Retainer Ring No. 4 Retainer Ring No. 8 Retainer Ring Part No. Qty. 2610010 2610011 2610012 2610013 2610014 2610015 2610016 2610017 2610021 10 10 10 10 10 10 10 10 10 Fittings Part No. 2610009 Kit Contents: (800) 499 -6849 • www.kysorhvac.com 304 2 Atco Air O Crimp Fittings The AIR-O-CRIMPTM fitting system has been developed for applications in which hose end fittings must be attached at the point of use in difficult applications such as buses, ambulances, RVs and limos. There is no need for a conventional crimping tool, messy glue or additional locating devices in order to achieve a reliable connection of the fitting and hose. The AIR-O-CRIMPTM system has passed SAE J2064 R134a Refrigerant Automotive Air Conditioning Hose Specification testing using the ATCO 3800 AIR-O-CRIMPTM series hose. NOTE: The AIR-O-CRIMPTM System is designed to work exclusively with Atco 3800 Series Hose. No other brand or style of hose is warrantied. • HOSE: ATCO 3800 Barrier Hose - Four Sizes Available -6, -8, -10, -12 • FITTINGS: ATCO “AC” Series Hybrid / Elastomer Fittings • CLAMP ASSEMBLIES: Color Coded - Four Sizes Available - 3806, 3808, 3810, 3812 • MANUAL CRIMP PLIERS: Model 3801 (Flat) Model 3802 (90o) • CUTTER: Model 3541 Kwikcut Hose Cutter AIR-O-CRIMPTM Fittings Fittings Straight Female O-Ring (FOR) Fitting With Clamp Assembly (Individually Packaged) Thread 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 5/8”-18 3/4”-16 7/8”-14 F 6 8 10 12 6 8 10 H 6 8 10 12 8 10 12 Straight Female O-Ring (FOR) With Switch or Service Port. Fitting With Clamp Assembly (Individually Packaged) Port NA NA NA NA NA NA NA Part No. 2660004 2660005 2660006 2660007 2660008 2660009 2660010 45 Degree Female O-Ring (FOR) Fitting With Clamp Assembly (Individually Packaged) Thread 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 3/4”-16 7/8”-14 305 F 6 8 10 12 8 10 H 6 8 10 12 10 12 Thread 3/4”-16 7/8”-14 7/8”-14 1 1/16”-14 3/4”-16 7/8”-14 F 8 10 10 12 8 10 H 8 10 10 12 10 12 Port 16mm R134 13mm R134 M10 SWP 13mm R134 16mm R134 13mm R134 2660015 2660011 2660014 2660012 2660016 2660013 Part No. Port NA NA NA NA NA NA NA 2660018 2660019 2660020 2660021 2660022 2660023 2660024 90 Degree Female O-Ring (FOR) Fitting With Clamp Assembly (Individually Packaged) Port NA NA NA NA NA NA Part No. 2660031 2660032 2660034 2660036 2660033 2660035 Thread 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 5/8”-18 3/4”-16 7/8”-14 F 6 8 10 12 6 8 10 H 6 8 10 12 8 10 12 (800) 499 -6849 • www.kysorhvac.com Part No. AIR-O-CRIMPTM Fittings Atco Air O Crimp Fittings Thread 3/4”-16 7/8”-14 1 1/16”-14 3/4”-16 7/8”-14 F 8 10 12 8 10 H 8 10 12 10 12 Straight Male O-Ring (MOR) Fitting With Clamp Assembly (Individually Packaged) Port 16mm R134 13mm R134 13mm R134 16mm R134 13mm R134 Part No. 2660025 2660027 2660029 2660026 2660028 45 Degree Male O-Ring (MOR) Fitting With Clamp Assembly (Individually Packaged) Thread 5/8”-18 7/8”-18 F 6 10 H 6 10 F 6 8 10 10 H 6 8 10 12 F 6 8 10 12 6 10 H 6 8 10 12 8 12 Port NA NA NA NA NA NA 2660037 2660039 2660040 2660042 2660038 2660041 Part No. Port NA NA NA NA NA NA NA 2660043 2660045 2660047 2660049 2660044 2660046 2660048 Port NA NA NA NA 2660052 2660053 2660054 2660055 90 Degree Male O-Ring (MOR) Fitting With Clamp Assembly (Individually Packaged) Port NA NA Part No. 2660050 2660051 90 Degree Bulkhead Male insert O-Ring (MIO) Fitting With Clamp Assembly (Individually Packaged) Thread 5/8”-18 3/4”-16 7/8”-14 7/8”-14 Thread 5/8”-18 3/4”-16 7/8”-18 1 1/16”-16 5/8”-18 7/8”-14 Fittings 90 Degree Female O-Ring (FOR) With Switch or Service Port. Fitting With Clamp Assembly (Individually Packaged) 2 Thread 5/8”-18 3/4”-18 7/8”-18 1 1/16”-16 5/8”-18 3/4”-18 7/8”-18 F 6 8 10 12 6 8 10 H 6 8 10 12 8 10 12 Part No. Straight Male Insert O-Ring (MIO) Fitting With Clamp Assembly (Individually Packaged) Port NA NA NA NA Part No. 2660060 2660061 2660062 2660063 Thread 5/8”-18 3/4”-16 7/8”-14 7/8”-14 F 6 8 10 10 H 10 8 10 12 (800) 499 -6849 • www.kysorhvac.com Part No. 306 2 Atco Air O Crimp Fittings AIR-O-CRIMPTM Fittings 90 Degree Male Insert O-Ring (MIO) Fitting With Clamp Assembly (Individually Packaged) Thread 3/4”-16 7/8”-14 3/4”-16 7/8”-14 F 8 10 8 10 H 8 10 10 12 Straight Splicer Fitting With Clamp Assembly (Individually Packaged) Port NA NA NA NA Part No. 2660056 2660058 2660057 2660059 Fittings Straight Splicer With Switch or Service Port. Fitting With Clamp Assembly (Individually Packaged) H 8 8 10 10 12 H 8 8 10 10 12 307 H2 8 12 Port 16mm R134 M10 SWP 13mm R134 M10 SWP 13mm R134 H3 8 12 H 6 8 10 12 Port NA NA NA NA Part No. 2660064 2660065 2660066 2660067 T-Splicer 3 Way Barb Fitting With Clamp Assembly (Individually Packaged) Part No. 2660070 2660068 2660071 2660069 2660072 Y Splicer 3 Way Barb Fitting With Clamp Assembly (Individually Packaged) H1 8 12 H 6 8 10 12 H1 6 8 10 12 8 12 H2 6 8 10 12 8 12 H3 6 8 10 12 6 10 Port NA NA NA NA NA NA Part No. 2660073 2660074 2660075 2660076 2660077 2660078 Straight Weld-On Barb Kit Fitting With Clamp Assembly (Individually Packaged) Port NA NA Part No. 2660079 2660080 Tube 3/8” 1/2” 5/8” 3/4” 5/8” H 6 8 10 12 12 Port NA NA NA NA NA (800) 499 -6849 • www.kysorhvac.com Part No. 2660081 2660082 2660083 2660084 2660085 AIR-O-CRIMPTM Fittings Atco Air O Crimp Fittings Straight Metric Female O-Ring (FOR) Fitting With Clamp Assembly (Individually Packaged) F M20 H 8 90 Degree Metric Female O-Ring Fitting With Clamp Assembly (Individually Packaged) Port NA Part No. Thread M20 x 1.5 2660017 F M20 H 8 Port NA Part No. 2660030 Fittings Thread M20 x 1.5 2 AIR-O-CRIMPTM Accessories Description 9” Hand Crimp Pliers - Narrow jaw pincers Description Part No. 2999105 Part No. 9” Hand Crimp Pliers - Side jaw pincers 2999106 Atco Air-O-Crimp Hose (3800) This hose meets SAE J2064 Type C Class 1 specification. Size I.D. O.D. Length Part No.* No. 6 No. 8 No. 10 No. 12 No. 6 No. 8 No. 10 No. 12 .320” [8.13mm] .420” [10.67mm] .510” [12.95mm] .635” [16.13mm] .320” [8.13mm] .420” [10.67mm] .510” [12.95mm] .635” [16.13mm] .580” [14.73mm] .690” [17.53mm] .780” [19.81mm] .965” [24.51mm] .580” [14.73mm] .690” [17.53mm] .780” [19.81mm] .965” [24.51mm] 50 FT. 50 FT. 50 FT. 50 FT. 500 FT. 500 FT. 300 FT. 250 FT. 2600020 2600021 2600022 2600023 2600016 2600017 2600018 2600019 * When placing order for hose, reference order in quantity of feet. Hose sold in 50 foot rolls or bulk, in quantities listed above. (800) 499 -6849 • www.kysorhvac.com 308 2 Atco Air O Crimp Fittings AIR-O-CRIMP Assembly Cut or trim the hose. Cut or trim the hose to the desired length using the kwikcut hose cutter. The cut should be made square to the hose length. Assemble the clamp. Assemble the clamp assembly onto the hose with the locator tab positioned approximately where the fitting groove will be when the fitting is assembled. Fittings Apply refrigerant oil. Apply a small amount of refrigerant oil (PAG or Ester) to the fitting barb and o-rings (optional). Assmeble the fitting into the hose until hose touches the ramped step on the fitting. Adjust the clamp assembly so the tab on the locator “snaps” into the groove of the fitting. Crimp clamps. Using the air crimp gun or the manual crimp pliers, crimp each clamp separately. Caution: If using the manual pliers, make sure that there is a metal to metal contact of the clamp ear when the crimp is made. there will be a slight amount of spring-back of the clamp ear when the crimp pliers are released. Failure to fully close the clamp may result in refrigerant leaks. Locator comes off. The locator will “pop off” after the second clamp is crimped and can be discarded. The result is a clean appearance and a reliable assembly. 309 (800) 499 -6849 • www.kysorhvac.com Atco Air O Crimp Fittings 2 CORRECT BUBBLE CRIMP GOOD EVEN CRIMP ON ALL SIDES OF FERRULE HOSE IS PUSHED ALL THE WAY INTO FERRULE UNABLE TO TWIST HOSE INSIDE FERRULE FITTING ITSELF IS NOT CRUSHED Fittings CORRECT BUBBLE CRIMP OVER CRIMPING Can damage inner lining and/or fitting due to over torque or wrong size crimping die selection. INCORRECT BUBBLE CRIMP FERRULE IS CRUSHED WITH METAL TABS EXTRUDING FITTING HAS COLLAPSED INSIDE AND WILL RESTRICT FLOW UNDER CRIMPING Can cause hose to blow off fitting due to wrong die size selection or under crimping. Typically hose will rotate easily if fitting is under crimped. INCORRECT BUBBLE CRIMP ONLY A SLIGHT IMPRESSION MADE BY THE CRIMPING JAWS ABLE TO TWIST HOSE INSIDE FERRULE UNEVEN CRIMPING Caused when hose is not pushed all the way into ferrule. Can cause hose to blow off due to insufficient number of crimps on ferrule/ INCORRECT BUBBLE CRIMP HOSE IS NOT PUSHED ALL THE WAY INTO FERRULE UNEVEN CRIMP AROUND FERRULE (800) 499 -6849 • www.kysorhvac.com 310 2 Hose Crimping Procedures CRIMPING PROCEDURES FOR TYPICAL MOBILE REFRIGERATION HOSE: Step 1 Determine hose size needed. (See “Beadlock Fitting Identification”, page 309.) Step 2 Determine hose fitting size and type needed. TYPE A TYPE B TWO PIECE FITTING ONE PIECE FITTING BARBED TYPE FITTING Fittings Step 3 SEPARATE FERRULE Make certain that the end of hose to be crimped is cut evenly. INCORRECT ANGLED CUT CORRECT EVEN CUT Step 4 BEADLOCK TYPE FITTING INCORRECT ANGLED CUT Push hose ALL the way into ferrule until hose is flush with peephole at the end of the ferrule. Ferrule Hose Hose Ferrule Peep Hole Peep Hole CORRECT DEPTH INCORRECT DEPTH Note: It may be necessary to lubricate the hose inside diameter and/or hose fitting barbs Step 5 Step 6 311 Determine correct crimping die size to match hose and fitting size. There are basically two types of crimp styles (see below). FACE LONG CRIMP BUBBLE CIRCULAR CRIMP TYPICALLY UTILIZED WITH 2 PIECE TYPE FITTINGS AND ALL RUBBER HOSE TYPICALLY UTILIZED WITH 1 PIECE BEADLOCK TYPE FITTINGS AND BARRIER NYLON/RUBBER HOSE Crimp hose/fitting based on specific crimping machine manufacturer’s recommendations. Reference the following illustrations for some common examples of correct and incorrect crimping. (800) 499 -6849 • www.kysorhvac.com Beadlock Fitting Identification Male O-Ring 2 SPECIAL GM DRIER FITTING No. 12 1 1/16”-16 Thread 5/8” 3/4” No. 10 7/8”-18 Thread 3/8” No. 8 3/4”-18 Thread No. 6 5/8”-18 Thread 3/8” No. 6 11/16”-16 Thread Female O-Ring 3/4” 5/8” No. 12 1 1/16”-14 Thread No. 10 7/8”-14 Thread 3/8” 1/2” No. 8 3/4”-16 Thread No. 6 5/8”-18 Thread Male Insert O-Ring 3/4” 5/8” 1/2” 3/8” No. 12 1 1/16”-14 Thread No. 10 7/8”-14 Thread No. 8 3/4”-16 Thread No. 6 5/8”-18 Thread O-Rings No. 12 No. 10 No. 8 No. 6 (800) 499 -6849 • www.kysorhvac.com 312 Fittings 3/4” 2 Beadlock Fitting Identification Female Flare 3/4” 1 1/16”-14 Thread 5/8” 7/8”-14 Thread 1/2” 3/4”-16 Thread 3/8” 5/8”-18 Thread Male Flare Fittings 3/4” 1 1/16”-14 Thread 5/8” 7/8”-14 Thread 1/2” 3/4”-16 Thread 3/8” 5/8”-18 Thread Hose End Sizes 3/8” 5/16” O.D. 3/8” Fitting For No. 8 - 1/2” (Nominal Size) Hose 1/2” 13/32” O.D. 3/8” Fitting For No. 8 - 1/2” (Nominal Size) Hose 313 5/8” 1/2” O.D. 5/8” Fitting For No. 10 - 5/8” (Nominal Size) Hose 3/4” 5/8” O.D. 3/4” Fitting For No. 12 - 3/4” (Nominal Size) Hose (800) 499 -6849 • www.kysorhvac.com Refrigerant Hose Sizes Beadlock Fitting Identification 13/32” I.D. 5/16” I.D. 3/4” No. 6 3/8” Nominal Size 1/2” I.D. 1” O.D. 29/32” 2 No. 8 1/2” Nominal Size 1 3/32” O.D. No. 10 5/8” Nominal Size 5/8” I.D. No. 12 3/4” Nominal Size Beadlock 3/8” FITTING FOR NO. 6 HOSE Fittings 1/2” O.D. 5/16” O.D. 5/8” FITTING FOR NO. 10 HOSE 5/8” O.D. 13/32” O.D. 1/2” FITTING FOR NO. 8 HOSE 3/4” FITTING FOR NO. 12 HOSE Torque Recommendations FLARE CONNECTIONS Tube O.D. Thread Size Ft./Lb. 3/8” 1/2” 5/8” 3/4” 5/8” 3/4” 7/8” 11/16” 18-20 36-39 52-57 71-79 O-RING CONNECTIONS Tube O.D. Thread Size Ft./Lb. 3/8” 1/2” 5/8” 3/4” 5/8” 3/4” 7/8” 11/16” 11-13 15-20 21-27 28-33 (800) 499 -6849 • www.kysorhvac.com 314 2 O-Rings 2799014 2799015 2799105 2799115 2799019 2799016 2799116 2799017 2799117 2799018 2799118 2799013 Fittings 2799020 2799021 2799219 2799022 2799026 2799028 2799023 2799024 2799025 2799027 2799029 2799030 2799031 2799032 2799033 2799034 2799035 Note: All O-Rings are shown actual size. Slim line seal used in Freightliner applications Part No. Description OEM No. 2712001 Slim Line No. 6 ABP N83 312076 2712002 Slim Line No.8 ABP N83 312060 2712003 Slim Line No. 10 ABP N83 312092 315 Qty. 10 10 10 Mini Stat seals used in Freightliner applications Part No. 2712004 2712005 2712006 2712007 Description Mini Stat No. 6 Mini Stat No. 8 Mini Stat No. 10 Mini Stat No. 12 OEM No. ABP N83 312366 ABP N83 312368 ABP N83 312361 ABP N83 312372 (800) 499 -6849 • www.kysorhvac.com Color Qty. Red 10 Red 10 Red 10 Red 10 O-Rings Description/Applications Part No. Material GM Capillary Tube O-Ring 1/4” (7/16-20) Valve Cap O-Ring, 1/4” (7/16-20) Retro Fitting Adapter O-Ring, Diesel Kiki Compressor Model DKS16H Oil Plug O-Ring, GM Oil Tube & Filter Bolt O-Ring, GM VIR Condenser Line O-Ring, Nissan No. 8 Hose Fitting & Filter Dryer O-Ring, Nissan 8mm Switch, Liquid Line, STV Valve, Expansion Valve O-Ring No. 6 Hose Filter Dryer O-Ring, Ford No. 6 Springlock & Tube Fitting O-Ring, Ford Combination Valve Schrader Port O-Ring, GM VIR Pickup Tube O-Ring, Nissan No. 10 Hose Fitting & Filter Dryer O-Ring, Nissan 10mm Filter Dryer, Condenser O-Ring, Ford Expansion Valve O-Ring, GM DA6 Discharge Crossover O-Ring, Mazda No. 6 Springlock Fitting O-Ring, Diesel Kiki BH DKS13G Oil Plug O-Ring, Min. Pressure Relief Valve O-Ring, Volvo No. 6 Hose Fitting O-Ring, Hyundai No. 6 Springlock O-Ring No. 6 Compression Fitting O-Ring, Chrysler 6C17 Large Control Valve (Inner) O-Ring, York & Sanden Oil Plug O-Ring, GM Pressure Relief Valve O-Ring, Toyota Pressure Switch O-Ring, GM V5 Control Valve O-Ring, GM R-134a Two Piece 16mm Primary Seal O-Ring, Chrysler 6C17 Oil Plug & Pressure Relief Valve O-Ring, GM, Ford Pressure Cycling Switch O-Ring, Sanden Compressor 1/4” Service Port O-Ring, Mitsubishi FX105V Compressor Control Valve (Inner) O-Ring, GM In-Line Filter O-Ring, Volvo Cycling/Pressure Switch O-Ring 2799013 2799014 Black Neoprene 2799015 Green HNBR 2799115 Black Neoprene 2799019 Black Neoprene No. 8 Hose Fitting O-Ring, Ford No. 8 Tube Fitting & Non-metric Springlock O-Ring, Volvo No. 8 Hose Fitting O-Ring, Mazda No. 8 Springlock Fitting O-Ring, GM V5 Control Valve O-Ring, Nissan No. 12 Hose Fitting & Condenser Discharge Line O-Ring, Nissan 12mm STV Valve, Filter Dryer, Condenser, Hose Fitting O-Ring, GM VIR Inlet Fitting O-Ring, Toyota Discharge Line O-Ring, Aeroquip Two Piece 13mm R-134a Adapter O-Ring, Mazda O-Ring, Hyundai No. 8 Springlock O-Ring, Mitsubishi Hose Fitting O-Ring No. 10 Hose Fitting O-Ring, Ford No. 10 Tube Fitting & Non-metric Springlock O-Ring, Nissan Evaporator Suction Fitting O-Ring, Nissan 16mm STV Valve, Evaporator, Hose Fitting O-Ring, Toyota Suction Line O-Ring, Volvo No. 10 Hose Fitting O-Ring, Mitsubishi Hose Fitting O-Ring, Nippondenso TV Manifold Port O-Ring, Nippondenso TV10/TV12C/TV14C Sensor Housing O-Ring, Mazda Hose Fitting O-Ring, York, Tecumseh Tube-O Valve O-Ring, Aeroquip Two Piece 16mm Adapter O-Ring No. 12 Hose Fitting O-Ring, Ford No. 12 Tube Fitting & Non-metric Springlock O-Ring, VIR Expansion Valve Lower O-Ring, VIR Evaporator Fitting Outlet O-Ring, VIR Connection to Evaporator Suction Line O-Ring, GM V5 Control Valve O-Ring, Chrysler 6C17 Small Control Valve O-Ring, Volvo No. 12 Hose Fitting O-Ring, Nissan 19mm Evaporator Suction O-Ring No. 6 GM Captive O-Ring, Ford Combination Valve Evaporator Manifold Bleed Line O-Ring, Ford Block Expansion Valve O-Ring No. 8 GM Captive O-Ring, Chrysler 6C17 Large Control Outer O-Ring No. 10 GM Captive O-Ring, GM DA6, Sanden SD505/507/TR70/TR90 Compressor Shaft Seal Head O-Ring, Hitachi Compressor Crossover O-Ring, Matsushita Compressor Model S1150 Carbon Seal Head O-Ring No. 12 GM Captive O-Ring, GM A6, R4, Sanden SD708/709 Compressor Shaft Seal Head O-Ring, Mitsubishi Compressor Model FX80 Suction Port O-Ring, Nihon Compressor Model DKV14C Carbon Seal O-Ring Chrysler Block Expansion Valve Liquid Line O-Ring GM A6, DA6, HR6, V5, Service Valve O-Ring, Nippondenso Compressor Model FX80 Suction Port O-Ring, Ford Compressor Model FX15/FS10 Service Valve O-Ring, Saab, Seiko, Seiki SS170PSS Compressor Service Valve O-Ring, Nissan York Rotary Vane Compressor Hose Manifold O-Ring GM Compressor Models R4, DA6, HR6, HR6HE, V5 Oval Service Valve O-Ring GM Compressor Model R4 Service Valve O-Ring, Chrysler Block Expansion Valve Suction Line O-Ring GM 5/8” Dual Metric Connection O-Ring GM 3/4” Dual Metric Connection O-Ring GM 1/2” Dual Metric Connection O-Ring York, Tecumseh Compressor Rotolock Teflon Seal No. 6 Springlock Connection Garter Spring No. 8 Springlock Connection Garter Spring No. 10 Springlock Connection Garter Spring No. 12 Springlock Connection Garter Spring 5/8” O-Ring, Water, Antifreeze 2799016 Green HNBR 2799116 Black Neoprene 2799017 Green HNBR 2799117 Black Neoprene 2799018 Green HNBR 2799118 Black Neoprene 2799020 Black Neoprene 2799021 2799022 Black Neoprene 2799023 Black Neoprene 2799024 2799025 Green HNBR 2799026 2799027 2799028 2799029 2799030 2799031 2799032 2799033 2799034 2799035 2799219 Black Neoprene Black Neoprene Black Neoprene Black Neoprene Black Neoprene Black Neoprene Black Neoprene Black Neoprene Black Neoprene Black EPDM * All o-rings purcharsed seperately are packaged in quantities of 25. (800) 499 -6849 • www.kysorhvac.com 316 Fittings O-Ring Specifications* 2 2 O-Rings O-Ring Assortment Kits Description Part No. Universal O-Ring Assortment Kit 2799200 Kit Contents: Part No. 2799022 2799024 2799025 2799021 2799117 2799013 2799014 2799116 2799023 2799020 2799028 Fittings 2799118 2799015 2799030 2799017 2799019 2799016 2799018 2799115 2799029 2799026 Note: Complete kit may be ordered by Part Number 2799200. Individual parts may be ordered by referencing the part number for each item as listed in the table (to left). Description Part No. O-Ring & Service Assortment Kit 2799201 2799027 Description No. 10 GM Captive O‑Ring, Black Neoprene Chrysler Block Valve O‑Ring, Green HNBR GM A6, DA6, HR6, V5, Ford, FS10, FX15, 10PA Service Valve O‑Ring, Compressor Service Valve O-Ring, Black Neoprene No. 8 GM Captive O‑Ring, Black Neoprene No. 10 GM, Ford, Chrysler, Import Hose Fitting O‑Ring, Black Neoprene Capillary O‑Ring, Black Neoprene Nissan No. 8 Hose Fitting/Dryer O‑Ring, Black Neoprene No. 8 GM, Ford, Chrysler Import Hose Fitting O‑Ring, Black Neoprene No. 12 GM Captive O‑Ring, Black Neoprene No. 6 GM Captive O‑Ring, Black Neoprene GM No. 10 Dual O‑Ring, Black Neoprene No. 12 GM, Ford, Chrysler, Import Hose Fitting O‑Ring, Black Neoprene No. 6 GM/Ford, Chrysler/Import Hose Fitting O‑Ring, Green HNBR GM No. 8 Dual O‑Ring, Black Neoprene No. 10 Ford Springlock Fitting O‑Ring, Green HNBR Comp. Switch Port/Oil Plug/No. 6 Compression Fitting O‑Ring, Black Neoprene No. 8 Ford Springlock Fitting O‑Ring, Green HNBR No. 12 Ford Springlock Fitting O‑Ring, Green HNBR No. 6 Ford Springlock Fitting O‑Ring, Black Neoprene GM No. 12 Dual O‑Ring, Black Neoprene GM “Oval” Service Valve O‑Ring, Black Neoprene Chrysler Block Valve/GM R4 Service Valve O-Ring, Black Neoprene Qty. 10 each per complete kit. Kit Contents: Part No. 2799025 2799021 2799117 2799013 2799116 2799023 2799020 2799118 2799015 2799031 1409002 1409003 1409009 2799098 2799099 2799101 2799102 2799103 2799095 2799097 2899028 Qty. 7 7 7 7 7 7 7 7 7 10 3 10 10 1 1 10 10 10 3 3 20 Description GM Compressor Port O-Ring, Black Neoprene No. 8 GM Captured O-Ring, Black Neoprene No. 10 Hose Fitting O-Ring, Black Neoprene Equalizer Tube O-Ring, Black Neoprene No. 8 Hose Fitting O-Ring, Black Neoprene No. 12 Captured Fitting O-Ring, Black Neoprene No. 6 Captured O-Ring, Black Neoprene No. 12 Hose Fitting O-Ring, Black Neoprene No. 6 Hose Fitting O-Ring, Green HNBR CCI & Tecumseh Rotolock Service Valve Teflon Seal CCI & Tecumseh Long Stem Cap Charging Port Cap (3/16″) Service Valve Cap (1/4″) A‑6 Shaft Nut Washer Charging Hose Seal Charging Hose Depressor Can Tap Seal Gasket CCI & Tecumseh Compressor Woodruff Key Sanden Shaft Key Schrader Valve Core Note: Complete kit may be ordered by Part Number 2799201. Individual parts may be ordered by referencing the part number for each item as listed in the table (to left). 317 (800) 499 -6849 • www.kysorhvac.com O-Rings O-Ring Assortment Kits Kit Contents: Part No. Qty. 1 7 6 4 1 2799202 Job O-Ring Assortment Kit Description Kit Contents: Part No. 2799108 Metric O-Ring Kit O-Ring Kit Listing Kit Description GM Assortment O-Ring Kit Metric O-Ring Kit Service Shop O-Ring Kit Universal O-Ring Kit Deluxe O-Ring Kit Job O-Ring Assortment Kit Description O-Ring No. 4 O-Ring No. 6 O-Ring No. 8 O-Ring No. 10 O-Ring No. 12 Part No. Description 2799203 2799016 2799017 2799204 2799206 2799015 2799017 2799208 2799016 Compressor Switch Port Oil Plug O-Ring, Black Neoprene No. 8 Hose Fitting O‑Ring, Green HNBR No. 10 Hose Fitting O‑Ring, Green HNBR No. 5 (7MM) Toyota Fitting Seal Nissan No. 8 Hose Fitting/Drier O‑Ring Nissan No. 10 Hose Fitting/Drier O‑Ring, Green HNBR Nissan Evaporator Suction Line O‑Ring, Green HNBR Nissan Condenser Liquid Line O‑Ring Nissan Compressor Flange O-Ring, Green HNBR Contents Part No. R-12 and R-134a compatible A complete assortment of green R-134a O-Rings. (shown above) A complete set of standard hose fitting O-Rings for R-12 and R-134a A complete assortment of R-12 and R-134a O-Rings. (shown on previous page) A complete assortment of O-Rings along with seals, gaskets, Schrader valves, expansion valve screens and caps for R-12 and R-134a. (shown on previous page) Shown above O-Ring Rubber Material Data Rubber Type / Designation Nitrile Buna / Buna N / NBR (Nitrile Butadiene Rubber) Color Black 2799107 2799108 2799110 2799200 2799201 2799202 Automotive Application • A/C Systems with R-12 Refrigerant & Mineral Oil • Power Steering / Rack & Pinion Systems • Heater Systems • Fuel Systems HSN (Highly Saturated Nitrile) / HNBR (Hydrogenated Nitrile Butadiene Rubber) Neoprene / CR (Chloroprene Rubber) Green or Yellow • A/C Systems with R-12 Refrigerant & Mineral Oil • A/C Systems with R-134a Refrigerant & PAG (Polyalkylene Glycol) or POE (Polyol Ester) Refrigerant Oils Black, Red or • Same as above Blue Tinted (800) 499 -6849 • www.kysorhvac.com 318 Fittings Description 2 2 Bulkhead Adapters, Tubing & Drain Hose Bulkhead Adapters Steel One-Piece with Jam Nut & Gasket Hose Size No. 6 No. 8 Use for routing A/C hose through walls and floorboards Part No. 2613891 2613892 Thread Size Tube Size Hose Size Qty. Coupling Only Nut Jam Only 5/8”-18 3/4”-16 7/8”-14 1 1/16”-14 3/8” 1/2” 5/8” 3/4” No. 6 No. 8 No. 10 No. 12 10 10 10 10 2799046 2799048 2799050 2799052 2799047 2799049 2799051 2799053 Drain Hose & Accessories Fittings Description 2799037 2799040 2799038 2799039 2799041 2799042 Part No. Drain Hose 1/2” I.D. (Bulk) Drain Hose 1/2” I.D. (10”) Check Valve - Used to allow proper drainage of condensation through 1/2” I.D. Hose 2600028 2600029 2799037 Drain Hose (1/2” I.D.) - Used on all A/C units (order in 12 ft. increments only) 2799038 Drain Hose (1/2” I.D.) - Used on all A/C units (order in 50 ft. increments only) 2799209 T-Fitting for 1/2” I.D. Drain Hose 90° Elbow for 1/2” I.D. Drain Hose Cap for Drain Hose or Fitting Splice for 1/2” I.D. Drain Hose 2799039 2799040 2799041 2799042 Insulating Tubing (1/4” Wall) Qty. Length 10 10 Specify required length in feet (multiples of 6 ft.) Inner Diameter 1 1/8” 1 3/8” Hose Size Part No. 10 12 2799044 2799045 Heater Hose 2600013 2600014 319 Length Hose I.D. Hose O.D. Part No. 50 ft. Rolls 50 ft. Rolls 8” x 2” 5/8” 3/4” 5/8” 15/16” 1” 1” 2600013 2600014 2600015 2600015 (800) 499 -6849 • www.kysorhvac.com Flexible Ducting, Clamps & Hose Adapters Hose Clamps Specialty Clamps Description Double Hose Clamp Cable Clamp Heavy Duty Plastic Tie Qty. 10 10 10 10 I.D. 2” max. Hose Clamp 3/16” max. 2799055 8” Long 2799056 5” Long 2799057 Description Hose Clamp Part No. 2799054 Part No. 2799069 2799070 2799071 Qty. Hose Size Part No. 11/16” max. 1” max. 25 25 6 10 -12 2799066 2799068 Clamp Inside Dia. Qty. Hose Size Part No. 11/16” max. 25 6 2799221 Outside Diameter 2 3/4” x 2 3/4” 4 3/16” x 4 3/16” 5 3/4” x 5 3/4” Collar Size 2 1/2” 4” 5” Fittings 1/2” min. to 3/4” max. 3/8” min. to 11/16” max. 5/8” min. to 7/8” max. with extra padding for stock mounting Hose Clamp Clamp Inside Dia. Duct Hose Adapters Round Duct Hose Adapter 2 Outside Diameter 2 7/16” 3 9/16” 4 3/8” Collar Size 2” 3” 3 1/2” Part No. Square Backed Duct Hose Adapter 2799062 2799063 2799064 Part No. 2799072 2799073 2799074 Louver Box Hose/Duct Clamp Bulk Flexible Ducting Clamp Inside Diameter Part No.* 1/2” min. to 1” max. 5/8” min. to 1 1/4” max. 1” min. to 2” max. 1 1/2” min. to 2 1/2” max. 2” min. to 3” max. 3” min. to 4 1/4” max. 2799076 2799077 2799078 2799079 2799080 2799081 Size Length I.D. 2” 50 Ft. 2 1/2” 50 Ft. 3” 50 Ft. 3 1/2” 50 Ft. 4” 50 Ft. 5” 50 Ft. * All clamps sold in qty. of 25. Part No. 2799084 2799085 2799086 2799087 2799088 2799089 Wire Clips & Ties Description Push Mount Wire Clip (1/2” I.D.) Push Mount, Tie Wrap Qty. 25 25 Part No. 2799090* 2799092* * Push mounts require 1/4” dia. hole. 2799090 2799092 (800) 499 -6849 • www.kysorhvac.com 320 2 Notes Fittings 321 Call: (800) 499 -6849 www.kysorhvac.com
Similar documents
price list - RGD Corporation
POORAKA SA 5095 Phone: (08) 8349 6333 Fax: (08) 8349 5226 Email: primepower@bigpond.com SOUTH AUSTRALIA VICTORIA
More informationCondensers - Bergstrom
Condensers Condenser Quick Cross Reference and Application Guide. . . . . . . . . 213 Condenser Quick Cross Reference and Application Guide.................................. 213 Condenser Qu...
More informationBus Products
Booster Pumps, Assemblies & Motors.... 370 Universal Booster Pumps, Assemblies & Motors................................................... 371 Universal Booster Pump Cross Reference Chart.............
More informationl-under the hood service - Sosmetal Products, Inc.
Pressure Cycling Switch . . . . . . . .L17-15 Hydraulic . . . . . . . . . . . . . . . .L14-12-13 R134a Retrofit Parts . . . . . . . . . . .L17-16 Metric . . . . . . . . . . . . . . . . . .L14-12-13...
More information