flexam ft875 finishing touch - table model

Transcription

FLEXAM FT875 FINISHING TOUCH - TABLE MODEL
18 OT - machinery equipment and tools > 1871 small machines
Article number
75.25.7110.0
Flexam FT875 Finishing Touch - table model
Technische data
Sanding machine, specially usefull to correct custom insoles.
Equipped with a long abrasive belt which runs on a low noise
disc. The FLEXAM construction (the motor is placed on the
back) allows you to have a lot of free space between the
scouring belt and the tools on the right. On the right, the
bajonet fitting makes exchanging tools very easy. FLEXAM
has many different tools to offer, allowing you to give the
finishing touch to your work. Choose for example the
Podologica tool. This machine runs on single phase 230
Volts, so it can be used anywhere. On the back is the
connection to an ordinary dust extractor. The dust bins are
easily removable so very easy to empty. The machine runs
smooth without much noise. Four rubber feet on the bottom
make the machine free of vibrations.
afmetingen B x D x H
toerental
aansluitwaarde
fasen
mm
U/min
V/Hz/kW
Ph
450 x 450 x 350
2460
230/50/0.55
1
materiaal
kleur
gewicht netto
kg
steel
Ral 7035
24
schuurband L x B
aansluitdiameter
aanbevolen debiet
mm
mm
m3/h
875 x 100
38
265
Executive series
Option:
- dust extractor DH245( (art. 75.70.9919.0)
- worktable FTW100 (art: 75.25.7112.0)
- Connection for extern dust extraction system - Ø70mm
Jos America Machines B.V.
Mandenmaker 14, Industriepark 'Het Hoog', 5253 RC Nieuwkuijk [NL]
Tel. +31 (0)73 511 9123, Fax. +31 (0)73 511 5097, info@josamerica.com
www.josamerica.com
yes
PODOLOGICA FINGER SANDING ROLL FOR MAIN AXIS ON BAYO Ø 21 X W 40 L =
131MM
19 OT - various > 1942 podologica tools
Article number
75.50.3371.0
Podologica finger sanding roll for main axis on bayo Ø 21
This scouring roll is very handy for working on insoles.
www.josamerica.com
PODOLOGICA (MEDIUM) Ø 45 X W 70MM ON BAYO 105MM
19 OT - various > 1942 podologica tools
Article number
75.50.3376.0
Podologica (medium) Ø 45 x W 70mm on bayo 105mm
www.josamerica.com
SCOURER PODOLOGICA W70 D45MM K40
65 devices + bayonets > 6510 Podologica tools
Article number
51.01.1004.0
scourer Podologica W70 D45mm K40
www.josamerica.com
SCOURER PODOLOGICA W70 D45MM K80
65 devices + bayonets > 6510 Podologica tools
Article number
51.01.1005.0
scourer Podologica W70 D45mm K80
www.josamerica.com
WORKTABLE FTW100 - FOR PLACING FT875
18 OT - machinery equipment and tools > 1871 small machines
Worktable FTW100 - for placing FT875
The FTW 100 is a complete worktable with fume extraction,
the possibility to put a vacuum cleaner inside and a top unit
with shelves and lighting. The work top is equipped with a
glue plate with integrated side fume extraction and there is
sufficient space for placing a FT875 Finishing Touch bench
grinder. Furthermore, the unit has 2 switches, one for
switching on/off the lighting and 1 for switching on/off the
vacuum cleaner
- color RAL 7035 (lichtgrijs)
- dimensions wxdxh 1000x750x1800mm
- excluding vacuum cleaner DH245 (art:75.70.9919.0)
- excluding FT875 Finishing Touch (art: 75.25.7110.0)
Technische data
mm
1000 x 750 x 1970
werkhoogte
voltage
fasen
mm
V
Ph
940
230
1
kleur
aansluitdiameter
mm
Ral 7035
100
Article number
www.josamerica.com
75.25.7112.0
VACUUM CLEANER DH245
19 OT - various > 1999 various tools
Vacuum Cleaner DH245
Professional vacuum cleaner suitable for dry vacuuming.
- trolley
- with cable and hose 4 mtr
- extra high air displacement
- Automatic start
Technische data
mm
geluidsniveau
aansluitwaarde
kleur
dB(A
60
V/Hz/kW 230 / 50 / 1,2
Blue
gewicht netto
nominale volume
nominaal onderdruk
kg
m³/h
Pa
9
245
17.000
tank inhoud
L
10
380 x 500 x 485
Article number
www.josamerica.com
75.70.9919.0
COMPACT S 75 SINGLE - WITHOUT NAUMKEAG
18 OT - machinery equipment and tools > 1873 Compact / work unit series
Compact S 75 single - without naumkeag
Professional sander, 75cm wide (approx 30 inches), fitted with
a bayonet connection on the left and a 100mm wide scouring
belt with diameter 100mm (or indicate if you want diameter
170mm free of charge). With naumkeag motor. A common
used option is the 2nd bayonet connection on the right, which
allows you to use the machine with extra 2 tools on the side at
the same time without exchanging them. The machine has a
low noise level and has a powerful internal dust extraction, but
can also be fitted with an external connection. The free space
behind the sanding belts is enlarged, so you will not touch the
backside during your work. The machine is equipped with a
safety switch and is powder coated in light grey Ral 7035 with
second colour yellow, but you are free to choose the second
colour free of charge. Powered triple phase, 400 volts with red
connector 16A CE-5P. On request also deliverable in 1 phase
230 volt.
Technische data
mm
werkhoogte
aansluitwaarde
fasen
mm
1070 - 1170
V/Hz/kW 230-400/50/1,85
Ph
3
750 x 750 x 1590
kleur
accent kleur
gewicht netto
kg
Ral 7035
Ral 2008 / Ral 100
197
bajos
contactschijf 100 x 100
schuurband 1480 x 100
mm
mm
2
1
1
korrel
Avantage series
18 - 120
1
Article number
www.josamerica.com
75.25.7301.0
FLEXAM UNDERCOVER 100
18 OT - machinery equipment and tools > 1874 Flexam Undercover 100
Flexam Undercover 100
The Undercover 100 is used in the orthopaedic shoe
technique. This machine is designed and built especially for
the use in hospitals and fitting rooms. This machine has
everything that is necessary for making small corrections.
Suppose, you share your location in the hospital with other
para-medics. It is annoying to leave your equipment, where
others will have problems. Often it is even not allowed. When
you are just occasionally in the hospital, we recommend the
new Flexam Finishing Touch FT 875. However, if you work
regularly, it would be nice if you could leave your equipment,
without hindering others.
From now on, you can! Especially for those employees, we
developed the Flexam Undercover 100. You will have all tools
available and it will safe time. The unit comes including a glue
table with activated carbon filtration, lighting, a long sanding
belt sander, a naumkeag as well as a bayonet for all kind of
tools. Also an air gun belongs to the basic equipment. There
is no need for triple phase power supply, so a normal single
phase connector will do the job. The cabinet can be closed
easily after work has been done.
Technische data
werkhoogte
toerental
mm
mm
U/min
geluidsniveau
aansluitwaarde
kleur
dB(A
75
V/Hz/kW 230 1ph/50/2,52
Ral 7035
gewicht netto
bajos
contactschijf 100 x 100
kg
bimsmotor
mm
1000 x 570 x 1980
1117
3000
275
1
1
1
Article number
www.josamerica.com
75.25.7405.0

flexam ft875 finishing touch - table model

Transcription

Similar documents

Technik - Das Lederhaus Albert Pflüger

Technik

Technical Features THALIA