Formliners Catalogue

Transcription

Formliners Catalogue
for Patterned Concrete
0800 88 22 12 www.reids.co.nz
Formliners are our business
and your complete satisfaction is our only concern.
Formliners
The Finest Architectural Concrete Begins With The Best Formliner
We pride ourselves on providing the best formliner in the industry, focusing our
efforts solely on the continuous improvement of our products. Architects, engineers,
designers, contractors and other professionals have chosen Fitzgerald Formliners from
Reids more often than any other company. Our proprietary products - Graylastic™,
Vac-U-Form™, Vinylok®, Fiberlyte™, and BrickMaster™ - are the most innovative
available in the construction market. With more than 250 standard and custom
patterns, we offer an unrivaled variety of design options. These patterns include fluted
ribs, fractured ribs, masonry, sandblast, stone, wood, geometric shapes and our unique
brick gasket systems. From design to final product, our attention to detail, quality and
engineering will guarantee the most creative and cost-effective solution for your project.
See why Fitzgerald Formliners from Reids has set the industry standard and is forming
the future.
Index
Vac-U-Form
4
Vac-U-Form Formliners are an alternative and economical choice where single or limited re-use is desirable.
BrichMaster
5
The BrickMaster gasket system delivers the aesthetic beauty and durability of a full brick building at a fraction of the cost.
Vinylok
6
VinyLok formliners unique interlocking system provides the ideal solution for projects where a seamless finish is required.
Graylastic
7
GrayLastic formliners provide maximum design latitude for precast or cast-in-place applications.
Fiberlyte
8
Lightweight FiberLyte Formliners are ideal for precast and cast-in-place projects where weight is a concern
and multiple use is expected.
BrickMaster
9
Fitzgerald Formliners’ BrickMaster™ gasket system is a cost-effective precast concrete alternative to full brick masonry.
Fluted Rib
11
Fitzgerald Formliners’ large selection of fluted and trapezoidal rib patterns are available in various standard or custom designs
Fractured Rib
17
Fitzgerald Formliners’ fractured rib patterns provide many options for creating rough-textured rib finishes.
Geometric
21
Fitzgerald Formliners’ GrayLastic™, Vac-U-Form™, and FiberLyte™ formliners are the perfect solution
for creating geometric patterns.
Masonry
25
Fitzgerald Formliners’ masonry patterns are used when the realistic look of brick or masonry block is desired.
Sandblast
29
Fitzgerald Formliners’ sandblast patterns range from light to heavy with varying degrees of aggregate and stone exposure.
Stone + Rock
31
Fitzgerald Formliners’ stone or rock patterns create the appearance of actual rock or stone.
Wooden Plank
37
Fitzgerald Formliners’ wooden plank textures create the aesthetics of natural board form finishes.
TM
© Copyright Reid™ Construction Systems 2007. All rights reserved. Moral rights asserted.
3
Vac-U-Form™
Single-use and Multi-use plastic
Formliners for tilt-up
or cast-in-place applications
Single-use: Vac-U-Form Single-Use formliners are made from a high-impact styrene
plastic. They are a cost-effective choice when formliners are to be used once or need
to be cut to fit the project parameters.
Technical Data:
ASTM
IZOD Impact
Tensile Strength
2.0
D256
3,700 psi
D638
Heat Deflection
188
D695
Vicat Softening
212
D1525
Wt. lb/sq.ft. 0.90 mil
.505
Multi-use: Vac-U-Form is made of acrylonitrile-butadiene styrene (ABS), which is a
durable plastic that provides up to 15 re-uses at a low price.
Technical Data:
Hammer Lane, Stockton, California
Application: Cast-in-place
Formliner: Fitzgerald Vac-U-Form
Pattern: No. 16959 with Custom Geometric Panels
ASTM
IZOD Impact, ft.-lb/inch
@ 73° F
@ 40° F
5.6
1.9
D256
Vac-U-Form Formliners are an
alternative and economical choice where
single or limited re-use is desirable.
Tensile Strength 73° F, psi
Yield
Modulus
5,300
330,000
D638
Benefits
Flexural Strength 73° F, psi
Yield
Modulus
9,300
325,000
D790
•
•
•
•
Economical for limited usage
Lightweight
Design versatility
Easy to field cut
Vac-U-Form formliners provide unlimited
design versatility. Many patterns match
side-to-side and top-to-bottom on
standard 1210 x 2430mm and 1210 x
3040mm panels.
Falling Dart Impact, ft.-lb
@73° F
@40° F
23
14
Heat Deflection Annealed
@264 psi
@66 psi
199° F
211° F
D648
Hardness 73° F Rockwell R
105
D785
Specific Gravity
1.05
D792
Wt.lb./sq.ft.
0.90 mil
.508 (Approx.)
.150 mil
.974 (Approx.)
Manufacturing Tolerance
Length: +/- 3mm at time of manufacture
Normal shrinkage and expansion is approximately 2mm in 3040mm with each 6.67° C
change in temperature.
TM
4
BrickMaster™
Brick Gasket system for precast
and tilt-up applications
The BrickMaster gasket system delivers
the aesthetic beauty and durability of a full
brick building at a fraction of the cost.
Benefits for Precasters
•
•
•
•
•
Higher profit
No more costly grinding
Minimal clean-up
Design flexibility
Re-use many times
Miller Park Stadium, Milwaukee, Wisconsin
Application: Precast Formliner: Fitzgerald BrickMaster Pattern: No. 11301B
Precaster: International Concrete Products, Germantown, WI.
Bricks fit snugly in the BrickMaster gasket. This
unique seal system protects the brick face from
bleed-through.
Benefits for Tilt-Up Contractors
•
•
•
•
•
•
Higher profit
No more costly grinding
Faster assembly
Reduced stripping costs
No sacking and patching
No butt joints
Our tilt-up BrickMaster system reduces concrete
leakage and provides seamless grout lines.
Multi Use
Single Use
BrickMaster is manufactured in our
innovative elastomeric urethane
formulation; it is stronger yet more
flexible than any other product on the
market. It provides design flexibility
and eliminates the need for grinding
bricks as it adjusts to variations in brick
sizes and will accommodate any brick
manufacturer.
Using our revolutionary, single use
BrickMaster gasket system will provide
you with the most economical and
efficient way to add a brick veneer to a
tilt-up structure. Labor savings are a
fraction of the cost of other systems:
no more sacking and patching,
reduced stripping costs, reduced
concrete leakage and virtually
seamless grout lines.
Our exclusive seal system holds each
brick securely during the placement of
concrete. And it can be used again and
again thus reducing in place costs.
BrickMaster gaskets are available in a
variety of brick sizes including Modular
(13 x 111mm), Utility (48 x 111mm),
Closure (48 x 111mm), Norman
(13 x 175mm), and Flemish. All universal
patterns are offered, including Running
Bond, Stacked Bond, Soldier bond, and
1/3 running bond. Custom patterns can
be manufactured such as arches and
basket weave.
Unlike other systems, our 1220 x
1220mm interlocking panels allow for
faster assembly, especially with multicolor layouts and designs. It provides
a barrier between the concrete and the
slab and can be trimmed to fit with an
ordinary pair of scissors.
The flexibility of the gasket adjusts
to variations in brick sizes, virtually
eliminating the need for grinding, and
allows the choice of brick from any
manufacturer. Custom designs, running
bond and stacked bond are all available.
TM
5
Benefits
VinyLok
®
Interlocking extruded plastic
formliners for tilt-up, precast
and cast-in-place applications
• Lower labor costs
• Seamless finishes
• Design flexibility
• Fast installation
• Less concrete leakage, grinding,
sacking or patching
VinyLok Single-Use and Multi-Use formliners are offered in a wide variety of standard
geometric patterns or can be fabricated for custom designs. Almost any linear design
can be produced easily.
Technical Data:
Single-Use High-Impact Styrene
ASTM
IZOD Impact
Tensile Strength
Lifetouch Building, Kansas City, Kansas
Application: Tilt-up
Formliner: Fitzgerald VinyLok
Pattern: No. 14302
VinyLok formliners are extruded in
lengths up to 12.2m for use in tilt-up,
precast and cast-in-place concrete
applications. The unique interlocking
system provides the ideal solution for
projects where a seamless finish is
required.
D256
3,700 psi
D638
Heat Deflection
188
D695
Vicat Softening
212
D1525
Wt. lb./sq.ft. .090mil
.505
Multi-Use ABS
ASTM
IZOD Impact
@73° F
@40° F
5.6
1.9
D256
Tensile Strength 73° F, psi
Yield
Modulus
5,300
330,000
D638
Flexural Strength 73° F, psi
Yield
Modulus
9,300
325,000
D790
Falling Dart Impact, ft.-lb.
@73° F
@40° F
23
14
Heat Deflection Annealed
@264 psi
@66 psi
199° F
211° F
D648
Hardness 73° F Rockwell R
105
D785
Specific Gravity
1.05
D792
Wt.lb./sq.ft.
VinyLok Interlocking panels are quickly installed to
provide a seamless finish both horizontally and vertically. VinyLok minimizes concrete leakage, grinding,
sacking and patching.
2.0
.090 mil
.150 mil
.508 (Approx.)
.974 (Approx.)
Manufacturing Tolerance
Length: +/- 0.3mm for every 3040mm
Width: +/- 1.6mm per piece
TM
6
GrayLastic™
Extended-use elastomeric
formliners for precast and
cast-in-place applications
Clifty Falls State Park, Highway 60,
Madison, Indiana
Formliner: Fitzgerald GrayLastic
Pattern: Antietam Drystack, No. 17910
GrayLastic formliners provide maximum
design latitude for precast or cast-inplace applications. They are re-usable
up to 100 times, and are especially
economical for applications that require
an extended, reusable formliner.
Post and Panel Wall
Application: Precast Formliner: Fitzgerald Graylastic Pattern: Georgia Ashlar, No. 16999
Fitzgerald’s GrayLastic formliners accurately reproduce virtually any design. Wood,
stone, masonry, fractured rib, fluted rib, sandblast and a range of custom patterns are
available. GrayLastic has been used in numerous artistic applications, whether cast-inplace or precast. A seamless finish can be achieved through our interlocking patterns
as well as with our side-to-side, top-to-bottom match points.
Benefits
•
•
•
•
•
•
Economical for extended usage
Realistic replication
High durability
Seamless finishes
Wide range of sizes
Easily installed
GrayLastic elastomeric formliners are
manufactured from 100% polyurethane
and are usually mold bonded to plywood.
They are easily attached to most concrete
forming systems, including wood, steel,
aluminum and fiberglass.
Many patterns are available in sizes up to 30’ long, and all GrayLastic formliners can be
easily field-cut. Odd sizes or custom fabrications are available for special applications.
Technical Data:
ASTM
Shore A Hardness
50-55
Cast Density, PCF
55-60
D2240
Tear Strength, PLI
90
D624
Tensile Strength, psi
770
D638 (D412)
Ultimate Elongation
275%
D638 (D412)
Manufacturing Tolerances
Mold bonded to 19mm plywood: +/- 3mm (length and width)
Unbonded (custom order only): +/- 25mm (length and width)
TM
7
FiberLyte™
Reinforced fiberglass Formliners
for precast and cast-in-place
applications
FiberLyte is well suited for large geometric designs with high relief and is frequently
used for custom art projects and special effects. For example, pier columns, bridge
railings and sound walls are applications where FiberLyte’s lightness and design
flexibility typically are put to full advantage.
FiberLyte formliners are produced in lengths up to 12.2m. It is also available in
standard, smooth panels measuring 1210mm wide and up to 12.2m long.
Specifications and Technical Data:
Material: Polyester Resin
Viscosity (Brookfield)
500-600
Monomer Content
40-47%
Hardness (Barcol)
40-45
Flexural Strength, psi
12,000-14,000
Tensile Strength, psi
7,000-8,000
Elongation (%)
Port of Long Beach, Long Beach, California
Formliner: Fitzgerald FiberLyte
Pattern: 17948
Lightweight FiberLyte Formliners are
ideal for precast and cast-in-place
projects where weight is a concern
and multiple use is expected. These
rugged formliners will allow hundreds of
castings.
Benefits
•
•
•
•
•
•
High durability
Lightweight
Easy release for precision finishes
Design flexibility
Ideal for deep-relief designs
Custom designs and sizes
1.5%
Manufacturing Tolerances
+/- 3mm for every 3040 mm
Limited Warranty
Fitzgerald Formliners™ warrants these products to be of uniform quality within manufacturing
specifications and will perform as represented, provided that the concrete construction practices
used are in accordance with the manufacturer’s recommendations and installation instructions.
Manufacturer assumes no responsibility for the adhesion of elastomeric liners to plywood when this
work is performed in the field. Manufacturer assumes no responsibility for any damage to Formliners
due to the improper use or application of a form release agent. Seller’s and manufacturer’s obligation
under this warranty shall be limited to refunding the purchase price or replacing that portion of the
material proven to be defective.
Fitzgerald Formliners makes no other warranty expressed or implied, including, without limitation,
warranties of fitness or merchantability, with respect to its products.
Architect/Engineer Short Form Specification:
All concrete surfaces designated in the engineering plans or specifications as “textured architectural
concrete” shall be formed using Fitzgerald Formliners (Insert Product and Pattern Number). No
substitutions will be allowed without prior written approval from the project architect or engineer. Any
substitute product must be submitted two weeks prior to the bid date.
Formliner usage, mock-up, storage, handling, fabrication, preparation and installation to comply with
Fitzgerald Formliner’s written instructions and recommendations. Refer to Fitzgerald Formliners’
written Application Guidelines.
TM
8
Sealed and sized bricks now available. (Call for details)
BrickMaster Gasket Sizing Chart (mm)
BrickMaster™
Pattern
Size
Brick Cavity
11301A
1210x1210
55.6 x 192
Optimum Brick
Size
Maximum Brick
Size
11301B
1210x1210
56 x 193
56 x 193
58 x 195
11301C
1210x1210
57 x 195
57 x 194
59 x 196
11301D
1210x1210
57 x 193
58 x 196
60 x 198
11301E
1210x1210
55.6 x 195
58 x 194
60 x 196
11302B
1210x1210
90 x 192
56 x 196
58 x 198
11303A
1210x1210
92 x 295
91 x 193
93 x 195
11303B
1210x1210
93 x 296
93 x 296
95 x 298
11303C
1210x1210
94 x 297
94 x 297
96 x 299
11305A
1210x1210
56 x 192
95 x 298
97 x 300
All gaskets available in raked and tooled grout.
All gaskets available with matching soldier courses.
Pattern 11301A
Pattern 11301B
1219mm
1219mm
Campbell Parking Garage, Campbell, California
Application: Precast and Brick Inlay
Formliner: Fitzgerald BrickMaster
Pattern: No.11302B with custom soldier courses
Precaster: Walters & Wolf Precast, Fremont, CA
Fitzgerald Formliners’ BrickMaster™
gasket system is a cost-effective precast
concrete alternative to full brick
masonry. Substantial savings are
achieved by precasters on labor and
materials because brick grinding is
virtually eliminated, time is reduced for
panel construction and installation, and
the cost of thin bricks is a fraction of the
cost of full bricks. Plus, BrickMaster
accommodates any manufacturer’s
brick, providing endless design
possibilities.
GrayLastic ™, Vac-U-Form ™, VinyLok ®, FiberLyte ™
and BrickMaster ™ are Trademarks or Registered
Trademarks of Fitzgerald Formliners, Inc.
1219mm
1219mm
56mm
56mm
192
mm
193
mm
58 x 196mm
60 x 198mm
57 x 194mm
59 x 196mm
Pattern 11301C
Pattern 11301D
1219mm
1219mm
1219mm
1219mm
57mm
57mm
195
mm
193
mm
58 x 196mm
60 x 198mm
58 x 194mm
60 x 196mm
Unique Seal System
TM
9
Pattern 11301E
Pattern 11302B
1219mm
Pattern 11303A
1219mm
1219mm
1219mm
1219mm
1219mm
56mm
92mm
90mm
195
mm
295 mm
192
mm
56 x 196mm
58 x 198mm
Pattern 11303B
93 x 296mm
95 x 298mm
91 x 193mm
93 x 195mm
Pattern 11303C
1219mm
Pattern 11305A
1219mm
1219mm
1219mm
1219mm
1219mm
90mm
94mm
93mm
296mm
94 x 297mm
96 x 299mm
56mm
192
mm
297mm
95 x 298mm
97 x 300mm
57 x 193mm
59 x 195mm
57 x 91mm
59 x 93mm
Note: A test panel using the selected material should be poured simulating actual jobsite conditions and procedures.
All concrete surfaces designated in the engineering plans or specifications as “textured architectural concrete” shall be
formed using Fitzgerald Formliners BrickMaster™ Pattern No. ____________. No substitutions will be allowed without
prior written approval from the project architect or engineer. Any substitute product must be submitted two weeks prior to
the bid date.
Formliner usage, mock-up, storage, handling, fabrication, preparation and installation to comply with Fitzgerald Formliners’
written instructions and recommendations. Refer to Fitzgerald Formliners’ written Application Guidelines.
Limited Warranty
Fitzgerald Formliners™ warrants these products to be
of uniform quality within manufacturing specifications
and will perform as represented, provided that the
concrete construction practices used are in accordance
with the manufacturer’s recommendations and installation
instructions. Manufacturer assumes no responsibility
for the adhesion of elastomeric liners to plywood when
this work is performed in the field. Manufacturer
assumes no responsibility for any damage to formliners
due to the improper use or application of a form release
agent. Seller’s and manufacturer’s obligation under
this warranty shall be limited to refunding the purchase
price or replacing that portion of the material proven to
be defective.
Fitzgerald Formliners makes no other warranty expressed
or implied, including, without limitation, warranties of
fitness or merchantability, with respect to its products.
TM
10
Pattern 14301**
25mm
Fluted Rib
Pattern 14302**
38mm
38mm
38mm
13mm
13mm
3 mil gusset
38mm
38mm
102mm
203mm
89mm
178mm
Description: 38mm depth, 89mm on center,
38mm peak, 25mm valley
Process: VinyLok, Vac-U-Form (New)
Part Sizes: VinyLok: 178mm coverage, lengths up to
12190mm; Vac-U-Form: 1219 x 3048mm *
Comments/Material: Single- or Multi-use;
Vac-U-Form: Single- or Multi-use
**Additional backing may be required
Columbus Airport Noise Wall, Columbus, Ohio
Application: Precast
Formliner: Fitzgerald VinyLok
Pattern: No.14341
Precaster: Concrete Technology, Inc., Springboro, OH
Fitzgerald Formliners’ large selection of
fluted and trapezoidal rib patterns are
available in various standard or custom
designs. Our VinyLok®
formliners
are the ideal solution when seamless
finishes are required.
Process: VinyLok, Vac-U-Form
12190mm; Vac-U-Form: 1219 x 2438mm
or 1219 x 3048mm *
Vac-U-Form: Single- or Multi-use
Styrene: 2.28mm, ABS: 2.8mm, 3.8mm
Pattern 14303
13mm
Pattern 14304
13mm
19mm
13mm
19mm
6mm
19mm
38mm
51mm
152mm
51mm
152mm
Note: Measurements under the title
Description represent the concrete.
Process: VinyLok
Part Sizes: 152mm coverage, lengths up to 12190mm *
Comments/Material: Single- or-Multi-use
Pattern 14305
12190mm; Vac-U-Form: 1219 x 3048mm,
1219 x 2438mm *
Comments/Material: Single- or Multi-use
Styrene: 2.28mm
ABS: 2.28mm, 2.8mm, 3.8mm
G/L: 1210 x 3040mm
Pattern 14306**
25mm
13mm
25mm
13mm
13mm
6mm
30mm
30mm
38mm
152mm
76mm
152mm
12190mm; Vac-U-Form: 1219 x 3048mm *
Styrene: 2.28mm
ABS: 2.28mm, 2.8mm
12190mm; Vac-U-Form: 1219 x 3048mm *
Styrene: 3.8mm
ABS: 3.8mm
TM
11
Pattern 14307
25mm
Pattern 14308
64mm
25mm
6mm
19mm
Pattern 14309
19mm
64mm
102mm
203mm
76mm
102mm
Description: 19mm depth, 102mm on center, 64mm
peak, 25mm valley
12190mm; Vac-U-Form: 1219 x 3048mm *
203mm
152mm
12190mm; Vac-U-Form: 1219 x 3048mm *
peak, 19mm valley
12190mm; Vac-U-Form: 1219 x 2438mm,
1219 x 3048mm *
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Pattern 14311
Pattern 14312**
Pattern 14310
13mm
6mm
19mm
25mm
13mm
44mm
6mm
25mm
10mm
13mm
38mm
25mm
1mm
5mm
22mm
19mm
57mm
38mm
44mm
171mm
152mm
70mm
12190mm Vac-U-Form: 1219 x 3048mm *
Styrene: 2.28mm
ABS: 2.8mm
Part Sizes: VinyLok: 171mm coverage, lengths up
to 12190mm; Vac-U-Form: 1219 x 3048mm *
Pattern 14313
Pattern 14314**
peak, 25mm valley
Pattern 14315
25mm
27mm
27mm
6mm
64mm
64mm
25mm
13mm
13mm
19mm
38mm
76mm
152mm
13mm
67mm
76mm
152mm
133mm
peak, 64mm valley
12190mm; Vac-U-Form: 1219 x 3048mm *
12190mm; Vac-U-Form: 1219 x 3048mm *
Styrene: 2.28mm
ABS: 2.28mm, 2.8mm
TM
12
Pattern 14316
Pattern 14317**
38mm
13mm
19mm
Pattern 14319
38mm
13mm
10mm
32mm
6mm
32mm
51mm
19mm
57mm
102mm
152mm
51mm
102mm
152mm
203mm
Process: Vac-U-Form, VinyLok (New)
Part Sizes: Vac-U-Form: 1219 x 3048mm;
VinyLok: 152mm coverage,
lengths up to 12190mm *
Styrene: 2.28mm
ABS: 2.28mm, 2.8mm
peak, 38mm valley
VinyLok: 203mm coverage, lengths up to 12190mm *
Styrene: 3.8mm
ABS: 3.8mm
VinyLok: 203mm coverage, lengths up to 12190mm
Styrene: 3.8mm
ABS: 3.8mm
Pattern 14320
Pattern 14321/
14358 = 19mm deep in gray
Pattern 14322** Standard A2/DOT
38mm
38mm
6mm
64mm
19mm
38mm
13mm
38mm
89mm
178mm
38mm
25mm
127mm
229mm
(14331 is similar, with 12.7mm draft)
38mm peak, 38mm valley,
12190mm; Vac-U-Form: 1219 x 3048mm *
254mm
Description: 25mm depth, 38mm on center
12190mm; Vac-U-Form: 1219 x 3040mm ,
1219 x 3048mm *
Styrene: 2.28mm
ABS: 2.8mm
Process: Vac-U-Form, GrayLastic, VinyLok (New)
Part Sizes: Vac-U-Form: 1143 x 3048mm; GrayLastic:
762 x 6401mm, 1143 x 6401mm
(two different tools, each 6401mm long);
GrayLastic: Mold bonded to 19mm plywood
(add 29mm to liner thickness)
Styrene: 3.8mm
ABS: 3.8mm
Pattern 14323 Standard A2/DOT
32mm
89mm
Pattern 14324
16mm
44mm
19mm
Pattern 14327
38mm
38mm
13mm
6mm
25mm
19mm
38mm
76mm
152mm
152mm
(Reverse of 14356)
Styrene: 3.8mm
ABS: 3.8mm
GrayLastic: 1210 x 3040mm
(Opposite of 14309)
Part Sizes: 1219 x 3048mm;
102mm
203mm
12190mm; Vac-U-Form: 1219 x 2438mm *
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
TM
13
Pattern 14328**
44mm
Pattern 14329**
44mm
44mm
6mm
Pattern 14335
44mm
8mm
6mm
10mm
7mm
19mm
32mm
102mm
203mm
102mm
203mm
32mm
159mm
12190mm; Vac-U-Form: 1219 x 3048mm *
Pattern 14339
22mm
13mm
12190mm; Vac-U-Form: 1219 x 3048mm *
Styrene: 0.5mm
ABS: 2.8mm
Pattern 14341
Pattern 14342/14645
13mm
22mm
13mm
13mm
14mm
3mm
6mm
25mm
13mm
50mm
54mm
162mm
152mm
12190mm; Vac-U-Form: 1219 x 3048mm *
Styrene: 2.28mm
ABS: 2.8mm
Description: Sine wave, 6mm depth,
13mm on center, Process: Vac-U-Form (New)
Part Sizes: 1219 x 2438mm * , 1210 x 3040
Pattern 14345
Pattern 14347
Pattern 14350
19mm
3mm
6mm
19mm
13mm
6mm
13
mm
13mm
38mm
2mm
152mm
38mm
3048mm
Process: VinyLok, GrayLastic
to 12196mm; GrayLastic: 1219 x 4877mm *
13mm
25mm
Description: Sine wave, 13mm depth,
38mm on center, 19mm peak, 19mm valley
Process: Vac-U-Form
Part Sizes: 1219 x 3048mm *
Styrene: 1.8mm
ABS: 2.8mm
76mm
152mm
12190mm; Vac-U-Form: 1219 x 3048mm *
TM
14
Pattern 14361
Pattern 14380**
10mm
10mm
64mm
3mm
Pattern 14381**
51mm
38mm
19mm
51mm
13mm
89mm
152mm
25mm
19mm
19mm
19mm
152mm
Process: VinyLok. Vac-U-Form (New)
12190mm; Vac-U-Form: 1219 x 3048mm *
Styrene: 3.8mm
ABS: 3.8mm
Description: 19mm depth, 86.8mm on center,
triangle peak, 51mm valley
Process: Vac-U-Form
Styrene: 3.8mm
ABS: 3.8mm
Pattern 14382**
Pattern 14383**
Pattern 14384** Standard AZ/DOT
6mm typical
2mm
76mm
48mm
37mm
22mm
51mm
22mm
22mm 25mm
73mm
25mm 38mm 178mm
38mm
25mm
38mm
89mm 76mm
140mm
152mm
38mm
22mm
Description: Norfolk Rib, 13-25mm deep random
reveals, 22-73mm peaks, 22-76mm valleys,
2mm draft typical
Process: Vac-U-Form, GrayLastic
Part Sizes: Vac-U-Form: 1219 x 1524mm,
1919 x 3048mm; GrayLastic: 1219 x 6069mm *
Comments/Material: Single or Multi-use;
Styrene: 2.28mm
ABS: 2.28mm, 3.8mm
(See Geometric section for full end view.)
Description: Texas Two Step, 6mm deep high/low
pattern, 3mm steps,
Process: Vac-U-Form, GrayLastic (New)
914 x 2642mm, 1219 x 3048mm *
GrayLastic: Mold bonded to 19mm
plywood (add 29mm to liner thickness)
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Description: ADOT Rustication,
38mm deep random fluted rib, 6mm draft typical
GrayLastic: 1219 x 3048mm, 1708 x 1708mm *
Styrene: 3.8mm
ABS: 3.8mm
Pattern 14385
Pattern 14386
Pattern 14443
152mm
102mm
44mm
6mm
22mm
70mm
19mm 70mm
19mm
10mm
r51mm
70mm
38mm 19mm
13mm
280mm
51mm
6mm
13mm
32mm
38mm 13mm
64mm
38mm
Description: Portland Rib, 38mm deep random
fluted rib, repeats on 610mm centers
Process: GrayLastic, Vac-U-Form (New)
Comments/Material: GrayLastic: Mold bonded to
19mm plywood (add 29mm to liner thickness);
Single- or Multi-use
305mm
Styrene: 1.8mm
ABS: 2.28mm
Description: 51mm radius rib, 51mm depth, 152mm
on center
Process: VinyLok
Part Sizes: 152mm coverage,
TM
15
Pattern 14541
Pattern 14542
25mm
13mm
114mm
Pattern 14549
102mm
13mm
13mm
19mm
13mm
152mm
152mm
13mm
r8mm
3mm
19mm Plywood Encapsulated
Description: 13mm depth; 152mm on center,
Comments/Material: Vac-U-Form: 19mm flat
section on one side of panel is overlapped by 114mm
flat on opposite side. Installed panel
width is 1219. Single- or Multi-use
Description: 8mm radius rib, 3mm depth,
13mm on center
Process: GrayLastic
Comments/Material: Mold bonded to 19mm
Pattern 14615
Pattern 14640
Pattern 14641
13mm
4mm
51mm
51mm
25mm
6mm
152mm
10mm
25mm
165mm
6mm
2mm radius gusset
121mm
241mm
38mm
29mm
Description: 6mm depth, 13mm on center
Process: VinyLok
Part Sizes: 152mm coverage, lengths up to 12190mm *
12190mm; Vac-U-Form: 1219 x 3048mm *
Process: GrayLastic, VinyLok (New),
Vac-U-Form (New)
Part Sizes: GrayLastic: 1219 x 5486mm;
VinyLok: 203mm coverage, lengths up to 12190mm;
Vac-U-Form: 1219 x 3048mm *
Pattern 14525
Sinewave
Note: All formliner dimensions are nominal. Actual
dimensions may vary slightly depending upon design, application and manufacturing process. Formliners may require
additional backing depending upon depth and width of
design. A test panel using the selected material should be
poured simulating jobsite conditions and procedures.
Limited Warranty
51mm
13mm
19mm
Description: 19mm deep sine wave.
67.8mm on centre, 22.2mm on top,
1227.6mm wide and up to 12190mm
long.
Process: Vac-U-Form
Part Sizes: 1219 x 2438mm * ,
1210 x 3040mm
All concrete surfaces designated in the engineering plans
or specifications as “textured architectural concrete” shall
be formed using Fitzgerald Formliners Vac-U-Form™ or
VinyLok® or GrayLastic™ Pattern No. ____________.
No substitutions will be allowed without prior written approval
from the project architect or engineer. Any substitute product
must be submitted two weeks prior to the bid date.
Formliner usage, mock-up, storage, handling, fabrication, preparation and installation to comply with Fitzgerald
Formliners’ written instructions and recommendations.
Refer to Fitzgerald Formliners’ written Application Guidelines.
Fitzgerald Formliners™ warrants these products to be of
uniform quality within manufacturing specifications and
will perform as represented, provided that the concrete
construction practices used are in accordance with
the manufacturer’s recommendations and installation
agent. Seller’s and manufacturer’s obligation under this
warranty shall be limited to refunding the purchase price
or replacing that portion of the material proven to be
defective.
Fitzgerald Formliners makes no other warranty
expressed or implied, including, without limitation,
warranties of fitness or merchantability, with respect to
its products.
TM
16
Pattern 16950
Adam’s Rib
Pattern 16951
Sahara Fin
13mm
Fractured Rib
13mm
13mm
13mm
13mm
6mm
19mm
25mm
38mm
51mm
(GrayLastic equivalent: 8000)
Description: 19mm deep standard fractured rib,
38mm on center
Process: Vac-U-Form
Part Sizes: Vac-U-Form: 1219 x 3048mm
GrayLastic: 1219 x 7315mm (New) *
GrayLastic: Mold bonded to 19mm plywood (add
29mm to liner thickness)
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Description: 25mm deep fractured fin,
51mm on center
GrayLastic: 1219 x 7925mm *
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Pattern 16952
Laramie Rope
Pattern 16953
Cypress Fin
25mm
Pump Station 361, Loxahatchee, Florida
Pattern: No.16964, San Diego Fin
Contractor: Muzzin Brothers, Inc., Jensen Beach, FL
Fitzgerald Formliners’ fractured rib patterns provide many options for creating
rough-textured rib finishes. They are
available in a wide array of standard or
custom designs.
25mm
13mm
22mm
29mm
38mm
13mm
76mm
51mm
Description: 29mm rope rip-out fractured rib,
13mm depth, 51mm on center
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 3.8mm
76mm on center
Styrene: 3.8mm
ABS: 3.8mm
Pattern 16954
Jutland Fin (Flute)
Pattern 16955
Berkley Rib
Note: Measurements under the title
Description represent the concrete.
13mm
6mm
13mm
25mm
6mm
3mm
16mm
25mm
25mm
Description: 16mm deep fractured fin, 25mm
on center
Styrene: 1.8mm
ABS: 2.28mm
51mm
Description: 25mm deep fractured rib,
51mm on center
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
TM
17
Pattern 16956
Corps Fin (Flute)
Pattern 16957
Harvard Fin (Flute)
19mm
19mm
13mm
6mm
Pattern 16958**
Manchester Fin
76mm
19mm
51mm
13mm
13mm
38mm
38mm
8mm
152mm
57mm
51mm
3mm
(Backing)
152mm on center
Part Sizes: Vac-U-Form: 1206.5 x 3035mm;
Styrene: 3.8mm
ABS: 3.8mm
57mm on center
Process: Vac-U-Form
Part Sizes: 1225.5 x 3048mm *
Styrene: 3.8mm
ABS: 3.8mm
Description: 31.75mm deep fractured fin,
51mm on center
Ideal for adding signage on flat top.
Styrene: 3.8mm
ABS: 3.8mm
Pattern 16959
Walnut Fin
Pattern 16960
Waco Rope
13mm
Pattern 16961**
Cordova Fin (Flute)
13mm
13mm
13
mm
38mm
25mm
13
mm
13mm
38
mm
13mm
38mm
25
mm
89mm
51mm
51mm on center
Description: 13mm rope rip-out fractured rib,
13mm depth, 25mm on center
(Backing)
89mm on center
Styrene: 3.8mm
ABS: 3.8mm
Pattern 16962A**
Modified Logsdon Fin
13mm
Pattern 16962B**
Logsdon Fin
17mm
51mm
Pattern 16963
Chestnut Fin
51mm
10mm
22mm
13mm
22mm
13mm
38mm
38mm
89mm
87mm
25mm
64mm
(Backing)
Description: 38mm deep exposed aggregate fin,
89mm on center
Process: Vac-U-Form
Styrene: 3.8mm
ABS: 3.8mm
(Backing)
Description: 38mm deep exposed aggregate fin,
87mm on center
Process: Vac-U-Form
Styrene: 3.8mm
ABS: 3.8mm
64mm on center
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
TM
18
Pattern 16964
San Diego Fin
Pattern 16965
Vedder Fin (Flute)
19mm
19mm
13mm
Pattern 16966
Virginia Fin (Flute)
13mm
10mm
25mm
6mm
5mm
6mm
25mm
25mm
19mm
51mm
51mm
32mm
51mm on center
Process: GrayLastic
32mm on center
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.28mm, 2.8mm
51mm on center
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.8mm
Pattern 16967
Rebar Rip-Out Rib
Pattern 16968**
Tucson Fin
Pattern 16969
Davison Highway Rope
48mm
19mm #6 rebar
102mm
48mm
3mm
19mm Plywood
Encapsulated
51mm
32mm
32mm
43mm
71mm
102mm
10mm
127mm
Description: 32mm deep, #6 rebar rip-out rib,
127mm on center
Process: Vac-U-Form
Styrene: 3.8mm
ABS: 3.8mm
Needs backing strips.
Description: 32mm split faced texture fin,
102mm on center
Process: Vac-U-Form
Styrene: 3.8mm
ABS: 3.8mm
Pattern 18000
25mm Adam’s Rib
Pattern 18001
Columbus Fin (Flute)
19mm
13mm
13mm
5mm
43mm
102mm
Description: 51mm rip-out rope texture,
102mm on center
Process: GrayLastic
plywood (add 29mm to liner thickness),
special end details
Pattern 18003
Florida Fin
19mm
48mm
6mm
13mm
48mm
3mm
6mm
51mm
38mm
25mm
38mm
51mm
(Same as 16950 Vac-U-Form)
Description: 25mm deep standard fractured rib,
38mm on center
Process: GrayLastic
Part Sizes: GrayLastic: 1219 x 7315mm *
51mm on center
Process: GrayLastic
102mm
102mm on center
Process: GrayLastic (New)
TM
19
Pattern 18005
Chevron Fin
2438mm
1219mm
25mm
25mm
51mm
25
mm
22mm 22mm
10mm
25
mm
16mm
10mm
25mm
64mm
51mm
64mm on center
Process: Vac-U-Form
Comments/Material: Single- or Multi-use, design
based on fractured fin Pattern No.16963
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Note: All formliner dimensions are nominal. Actual dimensions may vary slightly depending upon design, application and manufacturing process. Formliners may require
additional backing depending upon depth and width of design and job application. A test panel using the selected material should be poured simulating actual jobsite conditions and
procedures.
formed using Fitzgerald Formliners Vac-U-Form™ or GrayLastic™ Pattern No. ____________. No substitutions will be
allowed without prior written approval from the project architect or engineer. Any substitute product must be submitted two
weeks prior to the bid date.
Limited Warranty
be defective.
TM
20
Pattern 17936
Bridge Rail Void Form
Pattern 17938A
Custom Bridge Rail
Geometric
76mm
2210mm
1676mm
502mm
2083mm
864mm
584mm
305 229
305
203mm
1041mm
178
254
1118mm
Description: 76mm depth
Process: FiberLyte
Comments/Material: Multi-use
Description: Arch outline, r=118mm, 10mm depth, 6
x 6mm ‘V” groove; square outline,
10mm depth
Process: FiberLyte
Pattern 17938B
Custom Bridge Rail
Pattern 17939
Custom Bridge Rail A + B
I-10, Tucson, Arizona
Pattern: No.17952, Pueblo Deco
Contractor: Granite Construction Co., Tucson, AZ
Fitzgerald Formliners’ GrayLastic™,
Vac-U-Form™, and FiberLyte™ formliners
are the perfect solution for creating
geometric patterns. They provide
unlimited design versatility for custom
projects and special effects.
914mm
r305mm
1067mm
1676mm
216mm
838mm
356mm
254
356
1092mm
584mm
292mm
279mm
356mm
838mm
838mm
Description: Arch outline, r= 305mm, 10mm depth
Process: GrayLastic
Description: Part A: r = 1067mm,
Part B: r = 292mm, both parts 102mm depth
Process: FiberLyte
Part Sizes: Part A: 1676 x 838mm,
Part B: 838 x 838mm *
TM
21
Pattern 17940
Pattern 17941
4-Sided Pyramid (Square Facet Faces)
4-Sided Pyramid (Triangular Facet Faces)
2438mm
Pattern 17942
March Lane ‘V’ Wave
2438mm
1219mm
2438mm
1219mm
1219mm
102
102mm
102mm
102mm
102mm
102mm
102mm
51mm Peak
203mm
102mm
25mm
25mm
25mm
Description: Double-diamond pattern, 51mm depth
Process: Vac-U-Form
Comments/Material: 0.150 mil minimum, available
in a radius pattern, 826 x 813mm, r= 2146mm
Description: Single-diamond pattern, 25mm depth
Process: Vac-U-Form
Comments/Material: 0.150 mil minimum
Description: V-wave, 25mm depth
Process: Vac-U-Form
Comments/Material: 0.150 mil minimum
Pattern 17944
Arizona Maze
Pattern 17945
Texas Star
Pattern 17946
Arizona Santan
1575mm
3048mm
r 762mm
r 711mm
r 660mm
r 610mm
813mm
1067mm
13mm typ.
254mm
559m
m
2184mm
3048mm
1575mm
25-38mm
13mm
38mm
Description: Geometric pattern, 38mm depth
Process: GrayLastic
Description: Raised, beveled star inside a radius
reveal, 51mm depth from peak of star to back plane
Process: GrayLastic
Description: Geometric pattern, 25-38mm depth
Process: GrayLastic
plywood, (add 29mm to liner thickness)
TM
22
Pattern 17947
Arizona Zig Zag
Pattern 17948
Long Beach Wave
Pattern 17949
Estrella Triangular Maze
19mm
2438mm
1524mm
38mm
25mm
38mm
39mm
391mm
25mm
114mm
483mm
838mm
508mm
3mm
draft typ.
57
mm
152mm
406mm
51mm
57mm
64mm
38mm
Varies; 64mm Min.
51mm 25mm
6mm
6mm
41mm
1219mm
38mm
57mm
467mm
Varies; 51mm Min.
508mm
102mm
2587mm
452mm
19mm
38mm
54mm
432mm
54mm
Varies; 51mm Min.
67mm
59mm
38mm
Description: Double zig-zag pattern, 38mm depth
Process: GrayLastic
Description: Wave pattern, 57mm depth, 2 sizes
Process: GrayLastic
Part Sizes: Part A: 1219 x 838mm;
Part B: 914 x 914mm *
Pattern 17950
Sawtooth Cap
Pattern 17951
California Art Deco
21mm
225mm
305mm
38mm
Description: Geometric pattern, 38mm depth
Process: GrayLastic
Pattern 17952
Tucson Pueblo Deco
914mm
4115mm
1829mm
6mm
603mm
1524mm
914mm
914mm
19mm
76mm
38mm
89mm
Description: Sawtooth pattern, 19mm depth,
2 sizes
Process: GrayLastic
Part Sizes: 914 x 305mm, 1829 x 914mm *
Description: Random design, 13mm depth
Process: Graylastic
19mm
Description: Multi-level pattern, 89mm max. depth
Process: GrayLastic
TM
23
Pattern 14382**
Norfolk Rib
Pattern 14383**
Texas Two Step
Pattern 14384**
ADOT Random Rustication
38 25 25 25 25 38 25 25 25 25 38 25 25 25 25 38 25 25 25 25
25 38 38 38 25 25 38 38 38 25 25 38 38 38 25 25 38 38 38 25
2mm
1219mm
1219mm
48mm
22mm
22mm 48mm
22mm 48mm
76mm 51mm
51mm
25 51mm
25
25
25
6mm typical
25 38 178mm
89
76 140mm 152mm 38 5138 127 38 89 252
38mm
1219mm
22mm
73mm
22mm
73mm
22mm
73mm
22mm
73mm
22mm
37mm
73mm
22mm
22mm
37mm
22mm
Description: Norfolk Rib, 13-25mm deep random
reveals, 22-73mm peaks, 22-76mm valleys,
2mm draft typical
1219 x 3048mm (New);
Comments/Material: Single- or Multi-use; GrayLastic:
Mold bonded to 19mm plywood (add 29mm to
liner thickness)
Description: Texas Two Step, 6mm deep high/low
pattern, 3mm steps,
Process: Vac-U-Form, GrayLastic (New)
914 x 2642mm, 1219 x 3048mm *
Description: ADOT Rustication, 38mm deep random
fluted rib, 6mm draft typical
Comments/Material: Single- or Multi-use (0.150 mil
minimum); GrayLastic: Mold bonded to 19mm
Pattern 14385
Portland Rib
Pattern 14388
Crown Molding
217mm
205mm
22mm 10mm
70
22
70
22
70
70
22
70
19mm
70
22
38mm
32
22mm
38 13
64
38
64
38 13
64
38
Description: Portland Rib, 38mm deep random
fluted rib, repeats on 610mm centers
Process: GrayLastic, Vac-U-Form (New)
Comments/Material: Mold bonded to 19mm plywood
(add 29mm to liner thickness); Single- or Multi-use
Description: Crown Molding, 19mm depth
5mm
r95mm
32
48mm
16mm
Process: Vac-U-Form
procedures.
formed using Fitzgerald Formliners Vac-U-Form™ or GrayLastic™ or FiberLyte™ Pattern No. ____________.
No substitutions will be allowed without prior written approval from the project architect or engineer. Any substitute product must be submitted two weeks prior to the bid date.
Limited Warranty
be defective.
TM
24
Block
Pattern 16949
203 x 406mm Cinder Block
Pattern 16970
Splitfaced Stacked Block
Masonry
413mm
400mm
406mm
397mm
13mm
203mm 191
Home Depot, Castle Rock, Colorado
Application: Tilt-up
Pattern: No.16971, Splitfaced Running Bond
Contractor: Colorado Structures, Inc.,
Colorado Springs, CO
Fitzgerald Formliners’ masonry patterns are used when the realistic look
of brick or masonry block is desired.
They are available in a wide range of
sizes, textures and coursings that provide many design solutions.
10mm
203mm
194
13mm
10mm
Description: 203 x 406mm running bond block, block
size 191 x 394mm, 13mm mortar joints,
6mm max. depth
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.28mm, 2.8mm
Description: 203 x 406mm stacked block, block size
194 x 397mm, 10mm mortar joints,
19mm max. depth
Mold bonded to 19mm plywood
Styrene: 1.8mm
ABS: 2.28mm, 2.8mm
Pattern 16971
Splitfaced Running Bond Block
Pattern 16973
Arizona Splitfaced Block Grooved
406mm
397mm
81mm
10mm
19mm
25mm
203mm 194mm
10mm
19mm max. depth
Styrene: 1.8mm, 2.28mm
ABS: 2.8mm, 3.8mm
19mm wide smooth grooves, 25mm max. depth
Process: GrayLastic
3040 x 1210mm *
Description: 81mm fluted splitfaced block with
TM
25
Pattern 16974
51mm Splitfaced Block
Pattern 16976
305mm Splitfaced Block (Medium Texture)
Pattern 16975
Undersized Splitfaced Block
16mm
6mm
305mm
292mm
13mm
387mm
191mm
194mm
13mm
13mm
203mm
3048mm 292
102mm
51mm
44mm
19mm
13mm
Description: 51mm vertical stacked block, block size
194mm x 51mm, 102mm on center,
19mm max. depth, continuous groove
Styrene: 2.28mm, ABS: 2.8mm
19mm max. depth
Process: Vac-U-Form
Part Sizes: 2394 x 1206.5mm *
Styrene: 1.8mm
ABS: 2.28mm, 2.8mm, 3.8mm
(See 17977 for Smooth Face)
10mm max. depth
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.28mm, 2.8mm, 3.8mm
Pattern 16977
203mm Splitfaced Block
Pattern 16978
Cordera Spanish Tile
Pattern 17920
101.6 x 406mm Splitfaced Running Bond
203mm
203mm
191mm
191mm
394mm
13mm
13mm
13mm
203mm
13mm
203mm
191
13mm
13mm max. depth
Styrene: 1.8mm
ABS: 2.28mm, 3.8mm
89mm
19mm Max. Depth
191
13mm
Description: 203 x 203mm stacked tile with light
diagonal striations, tile size 191 x 191mm, 13mm
mortar joints, 3mm max. depth
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.28mm, 3.8mm
19mm max. depth
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.28mm, 3.8mm
TM
26
Brick
Pattern 17923
203mm Stacked Cinder Block
194mm
203mm
Pattern 16940
102 x 305mm Wire Brick
295mm
10mm
Pattern 16941
203mm Smooth Brick
10mm
194mm
10mm
89mm
194mm
57mm
13mm
10mm
10mm
3mm max. depth
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.28mm, 2.8mm
(Utility)
Description: 102 x 305mm running bond brick, brick
size 89 x 295mm, 13mm horizontal mortar joints and
10mm vertical mortar joints,
6mm max. depth
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.28mm, 2.8mm
Description: 203mm running bond brick, brick size
57 x 194mm, 10mm horizontal mortar joints and
10mm vertical mortar joints, 6mm max. depth
Styrene: 1.8mm
ABS: 1.8mm, 2.8mm
Pattern 16944
152 x 406mm Large Slumpstone
Pattern 16945
102 x 406mm Aged Slumpstone
Pattern 16946
102 x 406mm Classic Slumpstone
394mm
13mm
397mm
140mm
397mm
10mm
92mm
92mm
13
mm
Description: 152 x 406mm running bond brick,
brick size 140mm x 394mm, 13mm mortar joints,
10mm max. depth
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.28mm, 3.8mm
10mm
10mm
10mm
brick size 92 x 397mm, 10mm mortar joints,
10mm max. depth
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.28mm, 3.8mm
brick size 92 x 397mm, 10mm mortar joints,
10mm max. depth
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.28mm, 3.8mm
TM
27
Pattern 16947
203mm Used Brick
Pattern 16948
305mm Smooth Brick
Pattern 18040
203 Sand Texture Brick
203mm
194mm
305mm
194mm
292mm
10mm
10mm
13mm 76mm 67mm
60mm
102mm 89mm
10mm
10mm
R 5mm
13mm
R 3mm
16mm
63mm
(Modular)
Description: 70mm x 203mm running bond brick,
brick size 60mm x 194mm, 10mm mortar joints,
6mm max. depth
Process: Vac-U-Form
Part Sizes: 1219 x 2438, 1210 x 2430mm *
Styrene: 2.28mm
ABS: 2.8mm
(Utility)
Description: 102 x 305mm running bond brick, brick size
10mm max. depth
Part Sizes: Vac-U-Form: 2438 x 1219mm; GrayLastic: 3658 x
1219mm *
Comments/Material: Single- or Multi-use; GrayLastic: Mold
bonded to 19mm plywood (add 29mm to liner thickness)
Styrene: 2.28mm
ABS: 2.8mm
(Modular)
Description: 76 x 203mm running bond brick, brick
16mm max. depth
Process: GrayLastic
Comments/Material: Rough sand texture on top of
bricks; smooth grouts; mold bonded to 19mm
procedures.
Limited Warranty
be defective.
TM
28
Stone Textures
Pattern 16981
Exposed Aggregate
Pattern 16983
25mm Round Stone
(Same as 16992 Vac-U-Form)
Description: Small irregular pebble finish,
10mm max. depth
Process: GrayLastic
Description: Smooth round stones, 25mm max. size,
10mm max. depth
Part Sizes: 1219 x 3048*
GrayLastic: Mold bonded to 19mm
Styrene: 2.28mm
ABS: 2.8mm
Pattern 16990
Light Sandblast
Pattern 16991
Medium Sandblast
Description: No aggregate exposed,
2mm max. depth
Process: Vac-U-Form / Urethane
Styrene: 1.8mm
ABS: 2.28mm
GrayLastic: 1210 x 5581.6mm
Description: Top of aggregate exposed,
3mm max. depth
GrayLastic: 1219 x 3048mm, 1219 x 610mm
with 25mm reveals *
Styrene: 1.8mm
ABS: 2.28mm
Sandblast
High Rise Apartment Building,
23rd Street and 1st Avenue, New York, New York
Pattern: No.16981, Exposed Aggregate
Contractor: Pinnacle Industries II, LLC, Mamaroneck, NY
Fitzgerald Formliners’ sandblast patterns
range from light to heavy with varying
degrees of aggregate and stone
exposure. These patterns are the best
alternative to time-consuming
sandblasting, while providing a similar
finish.
TM
29
Pattern 16992
Heavy Sandblast
Pattern 16996
EIFS Texture (Simulated)
(Similar to 16981 GrayLastic)
Description: Some aggregate fully exposed,
10mm max. depth
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.8mm
Description: 2mm max. depth of texture
Process: GrayLastic
Comments/Material: Unbonded to plywood
procedures.
Limited Warranty
be defective.
TM
30
Ashlar
Pattern 16984
Aged Maryland Ashlar
Pattern 16986
Georgetown Ashlar
Stone & Rock
2438mm
2438mm
1219mm
1219mm
Weston Causeway Bridge, Weston, New Jersey
Pattern: No.16972, West Virginia Aged Sandstone
and No.16984, Aged Maryland Ashlar
Contractor: George Harms Construction Co., Inc., Howell,
NJ
Fitzgerald Formliners’ stone or rock
patterns create the appearance of
actual rock or stone.
Description: Ashlar stone, weathered surface,
matchpoints on all sides, 38mm max. depth, stone
sizes: 229 x 508mm wide, 152 x 432mm high
Styrene: 2.28mm
ABS: 2.8, 3.8mm
Description: Linear cut ashlar block, 38mm max.
depth, 19mm wide grout, block sizes: 229 x 737mm
wide, 127 x 279mm high
GrayLastic: 1219 x 1219mm , 3048 x 1219mm *
(add 29mm to liner thickness), pattern matched
Styrene: 2.28, 3.8mm
ABS: 2.8, 3.8mm
Pattern 16988
Missouri Old Cut Ashlar
1219mm
1219mm
1219mm
1219
mm
Description: Aged texture, 38mm max. depth,
stone sizes: 178 x 876mm wide, 127 x 356mm high
Process: GrayLastic
Part Sizes: (A) 1219 x 1219mm,
(B) 1219 x 1219mm, 1524 x 762mm *
3667mm
784mm
(No grout)
Description: 19mm max. depth
Process: GrayLastic
See Pattern 17929 for deeper version.
TM
31
Pattern 16997
Long Island Ashlar
Pattern 16999
Georgia Ashlar
483
mm
121
1219mm
9144mm
1219mm
362mm
4877mm
1219mm
1219mm
Pattern 17000
Florida Ashlar
1219mm
4877mm
610
1219mm
610
Description: 38mm max. depth, 22mm nominal
grout width, three pairs of interlocking molds, each
pairmeasures 9144mm in width, stone sizes:
318 - 1778mm wide, 127 - 533mm high
Process: GrayLastic
Part Sizes: 9144 x 1219mm (two formliners together) *
9144mm wide - some stones have flattened
weathered face
Description: Linear cut ashlar block, 29mm max.
depth, block sizes: 178 - 711mm wide,
76 - 305mm high
Process: GrayLastic
pattern matched
Pattern 17921
Brooklyn Sandstone
Pattern 17984
Chicago Ashlar
Description: Linear cut ashlar stone, 25mm max.
depth, stone sizes: 178 - 711mm wide,
76 - 305mm high
Process: GrayLastic, Vac-U-Form
Part Sizes: 4877 x 1219mm * , 2430 x 1210mm
Comments/Material: Mold bonded to 19mm plywood,
(add 29mm to liner thickness),
pattern matched.
Grout every 51mm horizontal. Ideal for putting tie
holes in grout and for barrier rails.
3658mm
1219mm
8992mm
1219mm
Description: 38mm max. depth, stone sizes: 318 1778mm wide, 127 - 533mm high
Process: GrayLastic
Part Sizes: 8992 x 1219mm (2 formliners together) *
plywood, pattern matched
Description: 32mm max. depth, stone sizes:
178 - 483mm wide, 152 - 406mm high
Process: GrayLastic
pattern matched
TM
32
Cobble
Pattern 16985
Indiana River Rock
Pattern 17916
Colorado River Rock (57mm Depth)
2438mm
Pattern 17931
Carolina River Rock
3658mm
1219mm
1219mm
1219mm
1219mm
1219mm
1219mm
127mm
152
mm
1219mm
Description: Random cobble stone,
38mm max. depth, rock sizes: 127 - 305mm
Part Sizes: 2438 x 1219mm * , 2430 x 1210mm plastic
plywood, (add 29mm to liner thickness),
pattern matched
Styrene: 3.8mm
ABS: 3.8mm
57mm max. depth, rock sizes: 102 - 254mm
Process: GrayLastic
pattern matched
Description: Random cobble stone,
Description: Interlocking river rock, 51mm max. depth,
102mm
76mm
rock sizes: 114-229mm wide, 102-203mm high
Process: GrayLastic
Part Sizes: 1219 x 1219mm
Comments/Material: Also available in GrayLyte, both
are mold bonded to 19mm plywood
Drystack
Pattern 17910
Antietam Drystack
Pattern 17911
San Diego Drystack
1219mm
Pattern 17933
Sierra Drystack
1219mm
1219mm
2438mm
4877mm
7315mm
533mm
1219mm 1219mm 1219mm 1219mm 1219mm
7315mm
1219mm
1219mm
32mm
Match points at 1219mm, 2438mm, 4877mm, 7315mm
38
1219mm
Maximum height of rocks is 54mm
Description: Random rough stacked rock, 51mm
max. depth, rock sizes: 152-610mm wide,
76-229mm high
Description: Random stacked field stone, 38mm
max. depth, stone sizes: 203-838mm wide,
76-229mm high, all sections in 1210mm
increments match top to bottom and side to side
Process: GrayLastic, Plastic
1210 x 3430mm (40.6 deep)
pattern matched
Styrene: 2.28mm
ABS: 2.8, 3.8mm
Description: Drystack stone, 54mm max. depth, stone
sizes: 152 - 432mm wide, 76 - 229mm high
Process: GrayLastic
Part Sizes: 2438 x 1219mm, 1219 x 1219mm,
2438 x 610mm, 1219 x 305mm, 610 x 305mm *
pattern matched
TM
33
Random Rock
Pattern 16980
Yosemite Rock
Pattern 16982
Arizona Flagstone
Pattern 16987
Fractured Granite
3048mm
1219mm
1219mm
Description: Pattern matched all four sides,
19mm max. depth
Comments/Material: Single- or Multi-use; Graylastic:
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Nowin 6090mm long GrayLastic
Description: Large irregular cut rock, pattern
matched panels, 19mm max. depth, rock sizes:
279-610mm wide, 203-305mm high
Mold bonded to 19mm
plywood, (add 29mm to liner thickness),
pattern matched
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Description: 25mm max. depth, pattern matched
Process: GrayLastic
See 16980 for plastic. This is a better version to use.
Pattern 16989
Split Slate
Pattern 16994
Sutter’s Mill Rock
Pattern 17922
Zion Random Rock
1219mm
3048mm
3658mm
152
mm
1219mm
1219mm
127mm
102mm
1524mm
76mm
(See Pattern 16979 & 17912 for variations with
reveals)
Description: Random pattern, 6mm max. depth
Part Sizes: GrayLastic: 1524 x 1829mm,
1219 x 4877mm; Vac-U-Form: 1219 x 3048mm *
Mold bonded to 19mm
No Grout.
Styrene: 1.8mm
ABS: 2.8mm
Description: Large boulders, 38-64mm grout,
25-70mm depth, rock sizes: 508-1194mm wide, 381838mm high. There is a 10 x 10mm bevel around
perimeter of pattern.
Process: GrayLastic
Description: Random rocks, 51mm depth, rock sizes:
152-813mm wide, 152-508mm high
Comments/Material: Also available in GrayLyte, both
are mold bonded to 19mm plywood (add 29mm to
liner thickness)
Graylyte: 1210 x 2430mm (38mm deep)
TM
34
Cut Stone Block
Pattern 17985
King’s Canyon Stone
Pattern 16979
Colorado Slate w/25mm Chamfer (1210 x 1520mm)
Pattern 16972
West Virginia Aged Sandstone
25mm chamfer
13mm mortar
joint all sides
38mm max.
relief
1219mm
1219mm
3048mm
127mm
152
mm
102mm
1219mm
76mm
Description: Four patterns, random stone,
stone sizes: 102 x 508mm wide, 76 x 381mm high
Comments/Material: Available in GrayLyte, both mold
bonded to 19mm plywood
Pattern 16995
Utah Quarried Sandstone Blocks
13mm chamfer
Description: Large blocks with aged surface,
41mm max. depth
Process: GrayLastic
Part Sizes: 610 x 305mm, 610 x 610mm,
1219 x 610mm, 1829 x 610mm *
Comments/Material: Available with or without 19mm
plywood backing (with backing, add 29mm to liner
thickness)
Description: Two 1219 x 1520mm panels separated
by a 25mm chamfer, 19mm max. depth
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Pattern 17004
Liberty Island Stone
Pattern 17912
Colorado Split Slate
w/25mm Chamfer (1210mm x 1210mm)
2438mm
1219mm
305
mm
914mm
1219mm
406mm
610mm
610mm
610mm
610mm
914mm
13mm grout around perimeter
2438mm
25mm chamfer
406mm
1219mm
22mm maximum
variation of
texture depth
13mm minimum
draft
1219mm
610mm
305
mm
406mm
1219mm
76mm minimum
draft
13mm chamfer
70mm max.
depth
Description: 98mm relief
Process: GrayLastic
Description: Three patterns, random cut stone,
70mm max. depth (also available in 41mm max.
depth), heavy texture face
Process: Graylastic
Part Sizes: 2438 x 1219mm; nominal 1219 x
1219mm * column form also available
Description: Two 1210 x 1210mm panels with a
25mm chamfer
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.28mm, 3.8mm
TM
35
Pattern 17981
Aged Iowa Sandstone Block
Pattern 17982
Splitfaced Stone
2438mm
Pattern 17983
Ohio Chiseled Limestone
1626mm
4890mm
1600mm
406mm
1219mm
813mm
813mm
406mm
Face of stone is 1600 x 864mm
406mm
914mm
864mm
4801mm
406mm
13mm
305mm
25mm
813mm
No Grout
406mm
Description: Sandstone blocks, 25mm wide grout
Process: GrayLastic
(17993 is Capstone 304.8 x 4800.6mm)
Description: Split-faced texture, 6mm max. depth, no
grout, rough stone wall cap, 16mm max. depth
Process: GrayLastic
Part Sizes: Four molds, 743 x 743mm,
4890 x 1219mm, 4801 x 305mm *
Description: Four molds, 22mm max. relief
Process: GrayLastic
Part Sizes: 1626 x 914mm, also available in
1140 x 454mm *
Pattern 17986
Aged Benicia Block
Pattern 17987
Palm Desert Stone
Note: All formliner dimensions are nominal. Actual
dimensions may vary slightly depending upon design,
application and manufacturing process. Formliners may
require additional backing depending upon depth and
width of design and job application. A test panel using
the selected material should be poured simulating actual
jobsite conditions and procedures.
Architect/Engineer Short Form
Specification:
All concrete surfaces designated in the engineering plans
or specifications as “textured architectural concrete”
shall be formed using Fitzgerald Formliners Vac-U-Form™
or GrayLastic™ or GrayLyte™ Pattern No. ____________.
No substitutions will be allowed without prior written
approval from the project architect or engineer. Any
substitute product must be submitted two weeks prior
to the bid date.
2438mm
1803mm
1549mm
406
254
mm
610mm
406mm
1219mm
826mm
864mm
406
216
mm
1511mm
1219mm
406mm
1803mm
254
mm
216mm
Description: Large interlocking splitfaced blocks
with filler panel, 25mm wide grout
Process: GrayLastic
Part Sizes: 2438 s 1219mm *
(add 29mm to liner thickness) Maximum height from
grout to top of block is 25mm
864mm
826mm
1118mm
864
mm
Perimeter reveals are 13mm plus 6mm draft;
center reveals are 25mm plus 6mm draft on each side
Description: Light sandstone texture, 19mm depth
Process: Vac-U-Form
Part Sizes: 1803 x 864mm; 1803 x 1118mm *
Styrene: 2.28mm
ABS: 2.8mm
Formliner usage, mock-up, storage, handling, fabrication,
preparation and installation to comply with Fitzgerald
Formliners’ written instructions and recommendations.
Refer to Fitzgerald Formliners’ written Application
Guidelines available by contacting: Fitzgerald Formliners,
1341 East Pomona Street, Santa Ana, CA 92705 Phone
Number: 714.547.6710
www.formliners.com
Limited Warranty
Fitzgerald Formliners™ warrants these products to be of
uniform quality within manufacturing specifications and
will perform as represented, provided that the concrete
construction practices used are in accordance with
the manufacturer’s recommendations and installation
instructions. Manufacturer assumes no responsibility for
the adhesion of elastomeric liners to plywood when this
work is performed in the field. Manufacturer assumes
no responsibility for any damage to formliners due to
the improper use or application of a form release agent.
Seller’s and manufacturer’s obligation under this warranty
shall be limited to refunding the purchase price or replacing
that portion of the material proven to be defective.
or implied, including, without limitation, warranties of fitness or merchantability, with respect to its products.
TM
36
Pattern 16920**
Random Wood
Pattern 16921
102mm Cedar Plank
Wooden Plank
16mm
102mm 108mm 159mm
114mm
57mm 16mm
19mm
140mm
State Route 21 Bridge Abutment, Passaic, New Jersey
Pattern: No.16928, 152mm Ship Lap
Contractor: Union Paving & Construction, Irvington, NJ
Fitzgerald Formliners’ wooden plank
textures create the aesthetics of natural
board form finishes. You can choose
light, medium or heavy grain finishes.
They are a cost effective solution to
old-fashioned board form applications.
89mm typ.
6mm
6mm
83mm 38mm
83mm
184mm
83mm
Description: 19mm deep random width medium grain
planks, 3mm draft typical
3505 x 4877mm *
Mold bonded to 19mm plywood (add 39mm to liner
thickness)
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
102mm typ.
13mm
Description: 6mm deep cedar plank with
13mm ‘V’ groove
Part Sizes: Vac-U-Form: 1219 x 3048mm, GrayLastic:
1219 x 4877mm *
Styrene: 1.8mm
ABS: 2.8mm
Pattern 16922**
Sacramento Plank
6 mm
89
mm
64
mm
Pattern 16923**
Barn Wood
89
mm
89
mm
73mm
89mm
137mm
143mm
175mm
89
mm
137mm
86mm
143mm
149mm
1219mm
Description: 6mm deep alternating 64mm and
89mm planks
Process: Vac-U-Form
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
Description: 6mm deep heavy random grain planks
with uneven plane
Process: Vac-U-Form
Now in GrayLastic: 1210 x 3650mm
Styrene: 2.28mm
ABS: 2.8mm, 3.8mm
TM
37
Pattern 16924
191mm Weathered Plank
Pattern 16925
Weathered Plank
Pattern 16926
127mm Wood Plank
13mm
184mm
3mm
13mm
114mm
10mm
203mm
typ.
6mm
127
mm
Description: 10 deep heavy grain planks,
203 on center
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.8mm, 3.8mm
Description: 3mm deep heavy grain random width
planks with vertical butt joints between planks
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.8mm, 3.8mm
Description: 6mm deep light grain cedar plank with
13mm ‘V’ groove seams
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.8mm
Pattern 16928**
182mm Ship Lap
Pattern 16930**
22mm Rough Sawn Plank
Pattern 16931
Haiku Random Plank
152mm
51 76
mm mm
51
mm
102
mm
51 51
mm mm
102
mm
102
mm
22mm
32 38
mm mm
89
mm
89
mm
64 38 64
mm mm mm
89
mm
32
mm
89
mm
14mm
191
mm
89
mm
140
mm
133
mm
10mm
5mm
140
89
mm mm
191
mm
89
mm
19mm
25mm
Description: 25mm deep lap with medium wood
grain texture
4877 x 1829mm *
Styrene: 3.8mm
ABS: 3.8mm
14mm
Description: 22mm deep heavy grain random width
planks, 6mm draft typical
Process: Vac-U-Form
Styrene: 3.8mm
ABS: 3.8mm
90
mm
140
mm
140
mm
191
mm
89 89
mm mm
10mm
191
mm
10mm
81
mm
191
mm
140
mm
89
mm
140
mm
89
mm
191
mm
5mm
140
mm
90
mm
5mm
140
mm
14mm
89
mm
Full pattern shown in photo on the front cover.
Description: 25mm - 76mm step heavy grain
random width planks
Process: GrayLastic
Part Sizes: 1219 x 4877mm (3 molds) *
TM
38
Pattern 16932
Light Grain 6mm ‘V’ Groove
152mm
102
mm
102
mm
51mm
152mm
6mm
Description: 6mm deep light grain random width
planks, 6mm ‘V’ groove and horizontal butt joints
Process: Vac-U-Form
Styrene: 1.8mm
ABS: 2.8mm
Note: All formliner dimensions are nominal. Actual dimensions may vary slightly depending upon design, application and manufacturing process. Formliners may require additional backing
depending upon depth and width of design and job application. A test panel using the selected material should be poured simulating actual jobsite conditions and procedures.
Limited Warranty
be defective.
TM
39
Auckland Head Office & Sales
Tauranga
64A Diana Drive, Glenfield
Auckland, New Zealand
PO Box 101-517, NSMC,
Auckland, NZ
Tel: +64 9 920 4360
Fax: +64 9 920 4364
Call Free: 0800 88 22 12
Email: sales@reids.co.nz
80 Glenlyon Avenue
Tauranga
Tel: 07 543 3806
Fax: 07 543 3807
Hamilton
21A Kaimiro Street
Hamilton
Tel: 07 849 0643
Fax: 07 849 0642
Nationwide: Freephone
Freefax
Wellington
Unit 2/1 Gough Street,
Seaview, Lower Hutt
Tel: 04 568 4505
Fax: 04 568 0098
Christchurch
125 Wrights Road,
Middleton, Christchurch
Tel: 03 338 3844
Fax: 03 338 8846
0800 88 22 12
0800 88 22 55
Email
Internet
Reidbar Information
reidbar@reids.co.nz
Website: www.reids.co.nz
Swiftlift Information
swiftlift@reids.co.nz

Formliners Catalogue

Transcription

Similar documents

The Andhra Pradesh Panchayat Raj Act, 1994

CYCRA Probend Instructions

Brochure

Welcome Brochure

ultra low maintenance outdoors COMPOSITE

CYCRA Probend Instructions

watchfire brochure. - Jiffy Signs and JS Printing

COBRACAM PRO

LED Signs | Watch What Happens