Skymasts TETRA Antenna Product Catalogue 2013

Transcription

TETRA Antennas and Accessories
Product Catalogue 2013
TM
communication
evolution
TM
TM
communication
communication
evolution
evolution
Contents
About Skymasts Antennas
P3
TETRA Base Station Antenna Product Range
Page 4
Omnidirectional / Glassfibre Colinear Base Station Antennas
P4
Directional / Omnidirectional Stacked Dipole Array Antennas
P9
Sectorised / X-POL & V-POL Panel Base Station Antennas
P12
TETRA Indoor Antenna Product Range
Page 33
Indoor Ceiling and Wall Mount Antennas
P33
Donor Antennas
P37
TETRA Fixed Mobile Antenna Product Range
Page 40
Omnidirectional Antennas
P40
Directional Antennas
P44
TETRA Accessories - Power Splitters and Antenna Installation Equipment
Page 50
Power Splitters
P50
Antenna Installation Equipment
P55
©2013 Skymasts Antennas Ltd., Northampton, England. E&OE
Skymasts Antennas is a world-class, innovative and agile antenna manufacturer, providing solutions designed
specifically for Critical Communications, with products deployed in some of the world’s most challenging
environmental conditions.
Skymasts Antennas has built up a well-earned reputation for producing quality, reliable and innovative TETRA antenna products
around the world, earning it the preferred supplier to the world’s largest TETRA infrastructure. With products currently deployed
in the UK, Brazil, Malaysia, Thailand, India and Continental Europe – including some of the world’s most challenging
environmental conditions – Skymasts Antennas is able to position itself as a truly global leader within TETRA Critical
Communications.
With nearly 25 years of proven experience as an antenna manufacturer, innovation sits at the heart of Skymasts Antennas’
philosophy; it has been a part of TETRA technology since the very beginning, earning the prestigious accolade of being one of
the original innovators within the industry. Today, Skymasts Antennas boasts the largest portfolio of TETRA antenna products
in the world.
As one of the world’s technology leaders within TETRA, Skymasts Antennas places great emphasis on the reliability and durability
of their products. For this reason, their TETRA products are lightning tested and approved, whilst all indoor antenna products
are SAR tested and certified. By keeping the manufacturing of their antennas in-house, Skymasts Antennas can ensure that
state-of-the-art equipment is used to achieve superior results, as well as keeping down costs and providing impeccable
customer service.
Some of Skymasts Antenna’s key TETRA capabilities include:
• Largest portfolio of TETRA antenna products
• Preferred supplier to the world’s largest TETRA infrastructure
• All TETRA products lightning tested and certified
• All indoor TETRA antennas SAR tested and certified
• State-of-the-art PIM testing capabilities
• Class leading PIM performance on all products
• Rapid antenna development capabilities
• ISO 9000:2008 registered
Contact Us Skymasts Antennas Ltd., Equilibrium House, Mansion Close, Moulton Park Industrial Estate, Northampton, NN3 6RU, England
T: +44(0) 1604 494 132 F: +44(0) 1604 494 133 E: info@skymasts.com
www.skymasts.com
TM
communication
evolution
Omnidirectional / Glassfibre Colinear Base Station Antennas
Type Designation
Description
Frequency band, MHz
Gain, dBd
Page
4220.03-405-Txx
3dBd TETRA Colinear Antenna
380 - 430
3
5
4220.06-405-Txx
380 - 430
6
6
4220.09-405-Txx
380 - 430
9
7
4220.23-405-Txx
Dual 3dBd TETRA Colinear Antenna
380 - 430
3
8
Gain, dBd
Page
Directional / Omnidirectional Stacked Dipole Array Antennas
Type Designation
Description
Frequency band, MHz
414.04-405-Txx
Four Stacked Dipole Array, Directional
380 - 430
9.7
9
4104.04-405
Four Stacked Dipole Array, OmniDirectional
380 - 430
5.7
10
414.22-405-Txx
Dual Two Stacked Dipole Array
380 - 430
5.7
11
Page 12
4
4220.03-405-Txx
3dBd Glassfibre TETRA Colinear Antenna
TM
communication
evolution
The 4220 Series colinear antenna is designed for demanding applications where a durable and high performance colinear antenna is
required. The centre fed dipole design and feed network gives a stable radiation pattern across a wide bandwidth, and allows tilted beam
designs to be effectively employed without large pattern distortions. High quality materials and manufacturing techniques are employed to
ensure that the antenna has excellent intermodulation performance & wide bandwidth characteristics for TETRA and other multi-channel
communication systems. The antenna has been designed to withstand lightning strike and has a conductor through it’s centre to allow a
finial to be fitted to it’s top cap, and is supplied as standard with a 7/16 female connector.
Frequency range
380 - 430 MHz
Input impedance
50Ω
VSWR
<1.5:1
H Plane ripple
< ±0.5 dB
Maximum input power
300 W CW
Polarisation
Vertical
Forward gain
3 dBd (5.15dBi)
3 dB Beamwidth
E Plane 35º
Available beamtilts
0 , 6 ,8 and 12º
Low PIM Certified
Intermodulation
-153dBc (3rd order), 2 x Tx@43dBm
Lightning Resistant Certified
Lightning protection
To withstand 2.5 x 106 A2 pulse
Strength Tested
All metallic parts DC grounded
Free Space Radiation Patterns
H-Plane
E-Plane
Connection
Fixed 7/16 DIN socket in base
Dipoles
38mm dia. brass tube
Dipole feeds
PTFE dielectric coaxial cable
Shroud
GRP tube (grey,RAL7035) 53mm dia.
Mounting section
Aluminium alloy tube 63.5mm dia. Alocrom 1000
Typical weight
4kg
Typical length
1.6m
Maximum wind loading @ 45m/s
142N
Survival wind speed
350km/h
Mounting Accessories
CSB
Welded
Aluminium
Colinear
Standoff
2140/2141
Galvanised steel
parallel clamp to
120mm
Ordering Codes
Stock code
Beamtilt
4220.03-405-T0
0o
4220.03-405-T6
6o
4220.03-405-T8
8o
4220.03-405-T12
12o
This product is RoHS compliant
Skymasts Antennas Ltd., Equilibrium House, Mansion Close, Moulton Park Industrial Estate, Nor thampton, NN3 6RU, England.
Tel+44(0)1604 494132 email info@skymasts.com web www.skymasts.com
5
Issue 1 03/2013. E&OE
4220.06-405-Txx
TM
communication
evolution
Frequency range
380 - 430 MHz
Input impedance
50Ω
VSWR
<1.5:1
H Plane ripple
< ±0.5 dB
Maximum input power
300 W CW
Polarisation
Vertical
Forward gain
6 dBd (8.15dBi)
3 dB Beamwidth
E Plane 16º
Available beamtilts
0 , 6 ,8 and 12º
Low PIM Certified
Intermodulation
Strength Tested
H-Plane
E-Plane
Connection
Dipoles
Dipole feeds
Shroud
GRP tube (grey, RAL7035) 53mm dia.
Mounting section
Weight
8.1kg
Overall Length
2.85m
230N
Survival wind speed
350km/h
CSB
Welded
Aluminium
Colinear
Standoff
2140/2141
Galvanised steel
parallel clamp to
120mm
Ordering Codes
Stock code
Beamtilt
4220.06-405-T0
0o
4220.06-405-T6
6o
4220.06-405-T8
8o
4220.06-405-T12
12o
6
Issue 1 03/2013. E&OE
4220.09-405-Txx
TM
communication
evolution
Frequency range
380 - 430 MHz
Input impedance
50Ω
VSWR
<1.5:1
H Plane ripple
< ±0.5 dB
Maximum input power
300 W CW
Polarisation
Vertical
Forward gain
9 dBd (11.15dBi)
3 dB Beamwidth
E Plane 8º
Available beamtilts
0 , 5 ,8 and 12º
Low PIM Certified
Intermodulation
Strength Tested
H-Plane
E-Plane
Connection
Dipoles
Dipole feeds
Shroud
Mounting section
Typical weight
13kg
Typical length
5.6m
447N
Survival wind speed
300km/h
CSB
Welded
Aluminium
Colinear
Standoff
2140/2141
Galvanised steel
parallel clamp to
120mm
Ordering Codes
Stock code
Beamtilt
4220.09-405-T0
0o
4220.09-405-T6
6o
4220.09-405-T8
8o
4220.09-405-T12
12o
7
Issue 1 03/2013. E&OE
4220.23-405-Txx
Dual 3dBd Glassfibre TETRA Colinear Antenna
TM
communication
evolution
The 4220.23 is a dual-feed colinear, containing two separate 3dBd omnidirectional antennas within one housing. The antenna is derived from the 4220 Series
colinear antenna, designed for demanding applications where a durable and high performance colinear antenna is required. The centre fed dipole design
and feed network gives a stable radiation pattern across a wide bandwidth, and allows tilted beam designs to be effectively employed without large pattern
distortions. High quality materials and manufacturing techniques are employed to ensure that the antenna has excellent intermodulation performance & wide
bandwidth characteristics for TETRA and other multi-channel communication systems. The antenna has been designed to withstand lightning strike and has
a conductor through it’s centre to allow a finial to be fitted to it’s top cap. The antenna is supplied with 1 metre tails, each terminated with a 7/16 socket as
standard.
Frequency range
380 - 430 MHz
Input impedance
50Ω
VSWR
<1.5:1
H Plane ripple
< ±0.5 dB
Maximum input power
2 x 150W CW
Polarisation
Vertical
Forward gain
2 x 3 dBd (5.15dBi)
3 dB Beamwidth
E Plane 33º
Isolation between inputs
>27dB
Low PIM Certified
Intermodulation
Strength Tested
H-Plane
E-Plane
Connection
7/16 DIN socket on 1m RG214 downlead
Dipoles
Dipole feeds
Shroud
Mounting section
Typical weight
8.1kg
Typical length
2.85m
230N
Survival wind speed
350km/h
CSB
Welded
Aluminium
Colinear
Standoff
2140/2141
Galvanised steel
parallel clamp to
120mm
Ordering Codes
Stock code
Beamtilt
4220.23-405-T0
0o
4220.23-405-T6
6o
4220.23-405-T8
8o
4220.23-405-T12
12o
Provisional. E&OE
8
414.04-405-Txx
Four element stacked dipole array, directional
TM
communication
evolution
The 414.04 Antenna is a version of the S.M4 four-stack dipole array, designed for improved performance in multi-channel communication
systems such as TETRA. The antenna features four phased folded dipoles fed with an RG214 coaxial feed network which allows for beamtilt
to be applied to the pattern; high quality materials and manufacturing techniques are employed throughout to ensure that the antenna
meets strict intermodulation requirements of multi-channel systems. The balun housings and cable connections are completely
encapsulated in an epoxy compound to IP67 eliminating any risk from water ingress. The antenna is supplied as standard with a 5 metre
tail terminated with a 7/16 socket. This model has a stronger boom to cope with high wind speeds.
Frequency range
380 - 430 MHz
Input impedance
50Ω
VSWR
<1.5:1
Front to back ratio
7 dB
Maximum input power
250W CW
Polarisation
Vertical
Forward gain
8.7 dBd (10.85dBi)
3dB Beamwidth
E Plane 21º
H Plane 160º
Low PIM Certified
Available beamtilts
0 º, 5º, 10º and 15º
Intermodulation
Standard connection
5m Length of RG214 c/w 7/16 DIN socket
Dipole feeds
RG214 Coaxial cable
Elements
12.7mm dia. x 1.6mm wall alum. alloy grade 6063T6
Support boom
Fasteners
Stainless steel grade A2-70
Dipole clamps
Cast aluminium alloy
Saddle clamps
Diecast zinc alloy
Balun encapsulant
Polyurethane resin U-600
Direct grounded
Weight
6.0 kg
Length
2.6 m
232N
Survival wind speed
315km/h
Strength Tested
H-Plane
E-Plane
UA66-22
Cast aluminium
cross / parallel
clamp 25-50mm
UA66-22
Cast aluminium
cross / parallel
clamp 25-50mm
Ordering Codes
Stock code
Beamtilt
414.04-405-T0
0o
414.04-405-T5
5o
414.04-405-T10
10o
414.04-405-T15
15o
9
Issue 1 03/2013. E&OE
TM
communication
evolution
4104.04-405
Four element stacked dipole array, omnidirectional
The 4104.04 Antenna is a version of the S.M4 four-stack dipole array, designed for improved performance in multi-channel communication
systems such as TETRA. The antenna features four phased folded dipoles fed with an RG214 coaxial feed network; high quality materials
and manufacturing techniques are employed throughout to ensure that the antenna meets strict intermodulation requirements of multichannel systems. The balun housings and cable connections are completely encapsulated in an epoxy compound to IP67 eliminating any
risk from water ingress. The antenna is supplied as standard with a 5 metre tail terminated with a 7/16 socket. This model has a stronger
boom to cope with high wind speeds.
Frequency range
380 - 430 MHz
Input impedance
50Ω
VSWR
<1.5:1
Front to back ratio
7 dB
Maximum input power
250W CW
Polarisation
Vertical
Forward gain
5.7 dBd (17.85dBi)
3dB Beamwidth
E Plane 21º
H Plane 360º
Intermodulation
Standard connection
Strength Tested
Dipole feeds
RG214 Coaxial cable
Elements
Support boom
Fasteners
Dipole clamps
Saddle clamps
Diecast zinc alloy
Balun encapsulant
Direct grounded
Weight
6.0 kg
Length
2.6 m
232N
Survival wind speed
315km/h
Low PIM Certified
H-Plane
E-Plane
UA66-22
Cast aluminium
cross / parallel
clamp 25-50mm
Ordering Codes
Stock code
4104.04-405
Frequency
380-430MHz
UA66-22
Cast aluminium
cross / parallel
clamp 25-50mm
10
Issue 1 03/2013. E&OE
TM
communication
evolution
414.22-405-Txx
Dual two-element stacked dipole array, directional
The 414.22 Antenna is a dual-feed version of the 414 four-stack dipole array, offering two separate two-stacked dipole arrays in one antenna
unit, and designed for improved performance in multi-channel communication systems such as TETRA. The antenna features phased
folded dipoles fed with an RG214 coaxial feed network; high quality materials and manufacturing techniques are employed throughout to
ensure that the antenna meets strict intermodulation requirements of multi-channel systems. The balun housings and cable connections
are completely encapsulated in an polyurethane compound to IP68 eliminating any risk from water ingress. The antenna is supplied with
1 metre tails, each terminated with a 7/16 socket as standard. This model has a stronger boom to cope with high wind speeds.
Frequency range
380 - 430 MHz
Input impedance
50Ω
VSWR
<1.5:1
Front to back ratio
7 dB
Maximum input power
2 x 150W CW
Polarisation
Vertical
Forward gain
2 x 5dBd (2 x 7 dBi)
3dB Beamwidth
E Plane 32º
H Plane 160º
Low PIM Certified
Strength Tested
H-Plane
E-Plane
>27dB
Intermodulation
Standard connection
2 x 1m Length of RG214 c/w 7/16 DIN socket
Dipole feeds
RG214 Coaxial cable
Elements
Support boom
Fasteners
Dipole clamps
Saddle clamps
Diecast zinc alloy
Balun Encapsulant
Polyurethane Resin U-600
Direct grounded
Mounting brackets
Not supplied (optional)
Weight
6.0 kg
Length
2.6 m
232N
Survival wind speed
315km/h
UA66-22
Cast aluminium
cross / parallel
clamp 25-50mm
UA66-22
Cast aluminium
cross / parallel
clamp 25-50mm
Ordering Codes
Stock code
Beamtilt
414.22-405-T0
0o
414.22-405-T5
5o
414.22-405-T10
10o
414.22-405-T15
15o
Provisional. E&OE
11
TM
communication
evolution
Type Designation
Description
Frequency band, MHz
Gain, dBd
Page
756.65.15.00
X-POL 65º Panel Antenna
380-400, 410-430, 450-470
15
13
756.90.13.00
380-400, 410-430, 450-470
13
14
756.12.11.00
380-400, 410-430, 450-470
11
15
756.65.12.00
380-400, 410-430, 450-470
12
16
756.90.10.00
380-400, 410-430, 450-470
10
17
756.12.08.00
380-400, 410-430, 450-470
8
18
750.65.15.00
V-POL 65º Panel Antenna
380-400, 410-430, 450-470
15
19
750.90.13.00
380-400, 410-430, 450-470
13
20
750.12.11.00
380-400, 410-430, 450-470
11
21
750.65.12.00
380-400, 410-430, 450-470
12
22
750.90.10.00
380-400, 410-430, 450-470
10
23
750.12.09.00
380-400, 410-430, 450-470
9
24
Gain, dBd
Page
Sectorised / X-POL & V-POL Panel Base Station Antennas, Wideband
Type Designation
Description
Frequency band, MHz
766.65.15.00
380-470
15
25
766.12.11.00
380-430, 420-470
11
26
766.65.12.00
380-470
12
27
766.12.08.00
380-430, 420-470
8
28
760.65.15.00
380-470
15
29
760.12.11.00
380-430, 420-470
11
30
760.65.12.00
380-470
12
31
760.12.08.00
380-430, 420-470
8
32
12
756.65.15.00
Cross polar UHF 65º panel antenna
TM
communication
evolution
The 756 antennas have been designed with TETRA applications in mind. The antennas are characterised by outstanding electrical &
mechanical performance. The high quality radiating elements are fed through a feed network whose flexible design enables electrical
downtilt of the main beam. The robust design of the 756, which includes advanced drainage & ventilation capabilities, makes these antennas
ideally suited for use in all environments and weather conditions. Tough corrosion proof aluminium is used extensively in their construction,
including the support members. The antenna is protected by a radome made of high quality waterproof plastic. Available in 65º, 90º and
120º beamwidths.
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>25dB
Maximum input power
2 x 250W
>27dB
Forward gain
15dBi
3 dB Beamwidth
H Plane 65º
E Plane 18º
Downtilt available
Electrical up to 15º (Please specify at time of order)
Polarisation
Vertical
Cross polar discrimination
>30dB
Intermodulation
3rd Order -153dBc 5th Order -175dBc
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
141 conformable coaxial cable
Direct Grounded
Mounting brackets
Ordered separately (see below)
Typical weight
7kg
Typical size
1910x330x150mm
Typical wind loading @45m/s
520N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
steps for 38120mm dia.
tube
Ordering Codes
Stock code
Frequency
756.65.15.00-390
380-400MHz
756.65.15.00-420
410-430MHz
756.65.15.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
13
Issue 1 03/2013. E&OE
756.90.13.00
TM
communication
evolution
120º beamwidths.
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>25dB
Maximum input power
2 x 250W
>27dB
Forward gain
13dBi
3 dB Beamwidth
H Plane 90º
E Plane 19º
Downtilt available
Polarisation
±45º
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
7kg
Typical size
1910x330x150mm
520N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
756.90.13.00-390
380-400MHz
756.90.13.00-420
410-430MHz
756.90.13.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
14
Issue 1 03/2013. E&OE
756.12.11.00
TM
communication
evolution
120º beamwidths.
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>25dB
Maximum input power
2 x 250W
>27dB
Forward gain
11dBi
3 dB Beamwidth
H Plane 120º
E Plane 18º
Downtilt available
Polarisation
±45º
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
7kg
Typical size
1910x330x150mm
520N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
756.12.11.00-390
380-400MHz
756.12.11.00-420
410-430MHz
756.12.11.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
15
Issue 1 03/2013. E&OE
756.65.12.00
TM
communication
evolution
120º beamwidths.
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>25dB
Maximum input power
2 x 250W
>27dB
Forward gain
12dBi
3 dB Beamwidth
H Plane 65º
E Plane 39º
Downtilt available
Polarisation
Vertical
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
4.5kg
Typical size
995x330x150mm
275N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
756.65.12.00-390
380-400MHz
756.65.12.00-420
410-430MHz
756.65.12.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
16
Issue 1 03/2013. E&OE
756.90.10.00
TM
communication
evolution
120º beamwidths.
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>25dB
Maximum input power
2 x 250W
>27dB
Forward gain
10dBi
3 dB Beamwidth
H Plane 90º
E Plane 39º
Downtilt available
Polarisation
±45º
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
4.5kg
Typical size
995x330x150mm
275N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
756.90.10.00-390
380-400MHz
756.90.10.00-420
410-430MHz
756.90.10.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
17
Issue 1 03/2013. E&OE
756.12.08.00
TM
communication
evolution
120º beamwidths.
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>25dB
Maximum input power
2 x 250W
>27dB
Forward gain
8dBi
3 dB Beamwidth
H Plane 120º
E Plane 39º
Downtilt available
Polarisation
±45º
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
4.5kg
Typical size
995x330x150mm
275N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
756.12.08.00-390
380-400MHz
756.12.08.00-420
410-430MHz
756.12.08.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
18
Issue 1 03/2013. E&OE
750.65.15.00
Vertically Polarised UHF 65º panel antenna
TM
communication
evolution
downtilt of the main beam. The robust design of the 750, which includes advanced drainage & ventilation capabilities, makes these
antennas ideally suited for use in all environments and weather conditions. Tough corrosion proof aluminium is used extensively in their
construction, including the support members. The antenna is protected by a radome made of high quality waterproof PVC based plastic.
Available in 65º, 90º and 120º beamwidths.
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>20dB
Maximum input power
250W
Forward gain
15dBi
3 dB Beamwidth
H Plane 65º
E Plane 18º
Downtilt available
Polarisation
Vertical
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
6.5kg
Typical size
1910x330x150mm
520N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
750.65.15.00-390
380-400MHz
750.65.15.00-420
410-430MHz
750.65.15.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
19
Issue 1 03/2013. E&OE
750.90.13.00
TM
communication
evolution
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>20dB
Maximum input power
250W
Forward gain
13dBi
3 dB Beamwidth
H Plane 90º
E Plane 19º
Downtilt available
Polarisation
±45º
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
6.5kg
Typical size
1910x330x150mm
520N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
750.90.13.00-390
380-400MHz
750.90.13.00-420
410-430MHz
750.90.13.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
20
Issue 1 03/2013. E&OE
750.12.11.00
TM
communication
evolution
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>20dB
Maximum input power
250W
Forward gain
11dBi
3 dB Beamwidth
H Plane 120º
E Plane 19º
Downtilt available
Polarisation
±45º
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
6.5kg
Typical size
1910x330x150mm
520N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
750.12.11.00-390
380-400MHz
750.12.11.00-420
410-430MHz
750.12.11.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
21
Issue 1 03/2013. E&OE
750.65.12.00
TM
communication
evolution
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>20dB
Maximum input power
250W
Forward gain
12dBi
3 dB Beamwidth
H Plane 65º
E Plane 38º
Downtilt available
Polarisation
Vertical
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
4kg
Typical size
995x330x150mm
275N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
750.65.12.00-390
380-400MHz
750.65.12.00-420
410-430MHz
750.65.12.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
22
Issue 1 03/2013. E&OE
750.90.10.00
TM
communication
evolution
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>20dB
Maximum input power
250W
Forward gain
10dBi
3 dB Beamwidth
H Plane 90º
E Plane 38º
Downtilt available
Polarisation
Vertical
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
4kg
Typical size
995x330x150mm
275N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
750.90.10.00-390
380-400MHz
750.90.10.00-420
410-430MHz
750.90.10.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
23
Issue 1 03/2013. E&OE
750.12.09.00
TM
communication
evolution
Frequency range
380-400MHz, 410-430MHz, 450-470MHz
Input impedance
50Ω
Return loss
<1.5:1
Front to back ratio
>20dB
Maximum input power
250W
Forward gain
9dBi
3 dB Beamwidth
H Plane 120º
E Plane 38º
Downtilt available
Polarisation
Vertical
>30dB
Intermodulation
(2 x Tx @ 43dBm)
Low PIM Certified
H-Plane
E-Plane
Connection
7/16 DIN Female
Radome
Styrosun Grey
Radiator
Brass nickel plate
Dipole feed
Direct Grounded
Mounting brackets
Typical weight
4kg
Typical size
995x330x150mm
275N
Survival wind speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
750.12.09.00-390
380-400MHz
750.12.09.00-420
410-430MHz
750.12.09.00-460
450-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
24
Issue 1 03/2013. E&OE
766.65.15.00
TM
communication
evolution
The 766 series of UHF Panel antenna has been designed to offer a very stable radiation pattern whilst giving a very wide bandwidth of
operation. This approach enables the use of the antenna for multi carrier operation, and for use where site sharing is also a requirement.
The antenna features carefully selected high quality components throughout including the main housing of the antenna being made from
corrosion resistant marine grade aluminium. The antennas compact design gives very low wind loading characteristics, and combined with
the low weight of the antenna, aids in the reduction of structural loading.
Frequency range
380 - 470MHz
Input Impedance
50Ω
VSWR
<1.5 : 1
Front to Back ratio
>20 dB
Maximum Input Power
2 x 400 Watts
Isolation between Input Ports
>27dB
Forward Gain
15dBi
Polarisation
±45˚
3 dB Beamwidths
E Plane 17˚ +/- 2˚
H Plane 65˚ +/- 5˚
Low PIM Certified
H-Plane
E-Plane
Cross Polar Discrimination
>30dB
Beam Tilt Options
Electrical up to 15˚ (Please specify at time of order)
Intermodulation
3rd Order –153dBc for 2 x Tx @ 43dBm
Connection
7/16 DIN Female
Radome
Light Grey
Housing
Marine Grade Aluminium
Lightning Protection
Direct Grounded
Mounting Brackets
Options to be Ordered separately (see below)
Weight
12.5kg (without mounting brackets)
Unpacked Dimensions
1800mm x 500mm x 150mm
Typical wind Load @ 45m/s
1050N
Survival Wind Speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
766.65.15.00
Frequency
380-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
Provisional. E&OE
25
766.12.11.00
TM
communication
evolution
Frequency range
380 - 430MHz & 420 - 470MHz
Input Impedance
50Ω
VSWR
<1.5 : 1
Front to Back ratio
>20 dB
Maximum Input Power
2 x 400 Watts
>27dB
Forward Gain
11dBi
Polarisation
±45˚
3 dB Beamwidths
E Plane 18˚ +/- 2˚
H Plane 120˚ +/- 5˚
Low PIM Certified
H-Plane
E-Plane
>30dB
Beam Tilt Options
Intermodulation
Connection
7/16 DIN Female
Radome
Light Grey
Housing
Direct Grounded
Mounting Brackets
Weight
Unpacked Dimensions
1800mm x 280mm x 150mm
600N
Survival Wind Speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
766.12.11.00-405
380-430MHz
766.12.11.00-445
420-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
Provisional. E&OE
26
766.65.12.00
TM
communication
evolution
Frequency range
380 - 470MHz
Input Impedance
50Ω
VSWR
<1.5 : 1
Front to Back ratio
>20 dB
Maximum Input Power
2 x 200 Watts
>27dB
Forward Gain
12dBi
Polarisation
±45˚
3 dB Beamwidths
E Plane 38˚ +/- 2˚
H Plane 65˚ +/- 5˚
Low PIM Certified
H-Plane
E-Plane
>30dB
Beam Tilt Options
Intermodulation
Connection
7/16 DIN Female
Radome
Light Grey
Housing
Direct Grounded
Mounting Brackets
Weight
Unpacked Dimensions
950mm x 500mm x 150mm
570N
Survival Wind Speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
766.65.12.00
Frequency
380-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
Provisional. E&OE
27
766.12.08.00
TM
communication
evolution
Frequency range
380 - 430MHz & 420 - 470MHz
Input Impedance
50Ω
VSWR
<1.5 : 1
Front to Back ratio
>20 dB
Maximum Input Power
2 x 200 Watts
>27dB
Forward Gain
8dBi
Polarisation
±45˚
3 dB Beamwidths
E Plane 38˚ +/- 2˚
H Plane 120˚ +/- 5˚
Low PIM Certified
H-Plane
E-Plane
>30dB
Beam Tilt Options
Intermodulation
Connection
7/16 DIN Female
Radome
Light Grey
Housing
Direct Grounded
Mounting Brackets
Weight
Unpacked Dimensions
950mm x 280mm x 150mm
320N
Survival Wind Speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
766.12.08.00-405
380-430MHz
766.12.08.00-445
420-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
Provisional. E&OE
28
760.65.15.00
TM
communication
evolution
This 760 series of UHF Panel antenna has been designed to offer a very stable radiation pattern whilst giving a very wide bandwidth of
Frequency range
380 - 470MHz
430 MHz
Input Impedance
50Ω
VSWR
<1.5 : 1
Front to Back ratio
>20 dB
Maximum Input Power
400 Watts
Forward Gain
15dBi
Polarisation
Vertical
3 dB Beamwidths
E Plane 17˚ +/- 2˚
H Plane 65˚ +/- 5˚
Low PIM Certified
H-Plane
E-Plane
Beam Tilt Options
Intermodulation
Connection
7/16 DIN Female
Radome
Light Grey
Housing
Direct Grounded
Mounting Brackets
Weight
Unpacked Dimensions
1800mm x 380mm x 150mm
830N
Survival Wind Speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
760.65.15.00
Frequency
380-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
Provisional. E&OE
29
760.12.11.00
TM
communication
evolution
Frequency range
380 - 430MHz & 420 - 470MHz
Input Impedance
50Ω
VSWR
<1.5 : 1
Front to Back ratio
>20 dB
Maximum Input Power
400 Watts
Forward Gain
11dBi
Polarisation
Vertical
3 dB Beamwidths
E Plane 18˚ +/- 1˚
H Plane 120˚ +/- 2˚
Low PIM Certified
H-Plane
E-Plane
Beam Tilt Options
Intermodulation
Connection
7/16 DIN Female
Radome
Light Grey
Housing
Direct Grounded
Mounting Brackets
Weight
Unpacked Dimensions
1800mm x 280mm x 150mm
600N
Survival Wind Speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
760.12.11.00-405
380-430MHz
760.12.11.00-445
420-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
Provisional. E&OE
30
760.65.12.00
TM
communication
evolution
Frequency range
380 - 470MHz
Input Impedance
50Ω
VSWR
<1.5 : 1
Front to Back ratio
>20 dB
Maximum Input Power
200 Watts
Forward Gain
12dBi
Polarisation
Vertical
3 dB Beamwidths
E Plane 35˚ +/- 2˚
H Plane 65˚ +/- 5˚
Low PIM Certified
H-Plane
E-Plane
Beam Tilt Options
Intermodulation
Connection
7/16 DIN Female
Radome
Light Grey
Housing
Direct Grounded
Mounting Brackets
Weight
Unpacked Dimensions
950mm x 380mm x 150mm
430N
Survival Wind Speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
760.65.12.00
Frequency
380-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
Provisional. E&OE
31
760.12.08.00
TM
communication
evolution
Frequency range
380 - 430MHz & 420 - 470MHz
Input Impedance
50Ω
VSWR
<1.5 : 1
Front to Back ratio
>20 dB
Maximum Input Power
200 Watts
Forward Gain
8dBi
Polarisation
Vertical
3 dB Beamwidths
E Plane 38˚ +/- 1˚
H Plane 120˚ +/- 2˚
Low PIM Certified
H-Plane
E-Plane
Beam Tilt Options
Intermodulation
Connection
7/16 DIN Female
Radome
Light Grey
Housing
Direct Grounded
Mounting Brackets
Weight
Unpacked Dimensions
950mm x 280mm x 150mm
320N
Survival Wind Speed
75m/s
756.7030
Tilt Bracket
Assembly
0 - 22º in 1º
tube
Ordering Codes
Stock code
Frequency
760.12.08.00-405
380-430MHz
760.12.08.00-445
420-470MHz
756.7010
Fixed Bracket
for 38-120mm
dia. tube
Provisional. E&OE
32
TM
communication
evolution
TETRA Indoor Antenna Product Range
Indoor Ceiling and Wall Mount Antennas
Type Designation
Description
Frequency band, MHz
Gain, dBi
Page
802.00.05.00
Wideband TETRA / UHF Ceiling Mount Antenna
380 - 470
0
34
802.01.05.00
Wideband TETRA Celiling Mount Antenna
380 - 430
1
35
752.01.05.00
Wideband TETRA / UHF Indoor Panel Antenna
380 - 470
4
36
Type Designation
Description
Frequency band, MHz
Gain, dBd
Page
702.04-405
Four Element Yagi Antenna, Screened Reflector
380 - 430
7.5
37
702.08-405
Eight Element Yagi Antenna, Screened Reflector
380 - 430
10
38
S.CR-90
Corner Reflector Antenna
380 - 430
10
39
Donor Antennas
33
TM
communication
evolution
802.00.05.00
Wideband TETRA / UHF indoor ceiling mount antenna
The 802.00.05.00 is a compact, stylish and efficient indoor antenna designed for use with UHF TETRA & PMR systems. It’s ingenious
radiator design allows for incredibly broadband operation making the antenna suitable for use within either UHF TETRA frequency band.
It’s stylish design makes for a discreet installation in any modern office or industrial complex, and the antenna is simple to install with the
minimum of fuss.
Frequency range
380-470MHz
Input impedance
50Ω
VSWR
<2.0:1
Maximum input power
50 Watts
Polarisation
Vertical
Gain
2dBi
3 dB Beamwidth
Horizontal 360º
Vertical 80º
SAR Tested
Low PIM Certified
Intermodulation IM3
-120dBm (2 x Tx @ 37dBm)
Connection
500mm RG303 term. ‘N’ type socket
Element
FR4 Printed Circuit
Radome
ABS White Fire Retardant
Mounting
Via 3 screws on 180mm PCD
Dimensions
231mm (diameter) x 81mm (height)
Weight
400g
H-Plane
E-Plane
Ordering Codes
Stock code
Beamtilt
802.00.05.00
380-470MHz
802.01.05.00
380-430MHz
802.02.05.00
420-470MHz
34
Issue 1 03/2013. E&OE
802.01.05.00
Wideband TETRA indoor ceiling mount antenna
TM
communication
evolution
The 802.01.05.00 is a compact, stylish and efficient indoor antenna designed for use with UHF TETRA systems. It’s ingenious radiator
design allows for incredibly broadband operation making the antenna suitable for use within either UHF TETRA frequency band. It’s stylish
design makes for a discreet installation in any modern office or industrial complex, and the antenna is simple to install with the minimum of
fuss.
Frequency range
380-470MHz
Input impedance
50Ω
VSWR
<2.0:1
Maximum input power
50 Watts
Polarisation
Vertical
Gain
2dBi
3 dB Beamwidth
Horizontal 360º
Vertical 80º
SAR Tested
Low PIM Certified
Intermodulation IM3
-120dBm (2 x Tx @ 37dBm)
Connection
500mm RG303 term. ‘N’ type socket
Element
FR4 Printed Circuit
Radome
ABS White Fire Retardant
Mounting
Via 3 screws on 180mm PCD
Dimensions
231mm (diameter) x 81mm (height)
Weight
400g
H-Plane
E-Plane
Ordering Codes
Stock code
Beamtilt
802.00.05.00
380-470MHz
802.01.05.00
380-430MHz
802.02.05.00
420-470MHz
35
Issue 1 03/2013. E&OE
752.01.05.00
UHF / TETRA Indoor Panel Antenna
TM
communication
evolution
The 752.01.05.00 antenna is a broadband panel antenna suitable for indoor or outdoor coverage with TETRA and other UHF repeater
systems. The dual-patch design gives the antenna stable radiation characteristics over a broad band of frequencies making the antenna
ideal for a large range of indoor multichannel UHF repeater networks. This model has undergone S.A.R. testing to EN50385:2002. The
antenna is available with a snap-fit wall mounting bracket for easy installation, and can be supplied with connector and cabling options to
suit application requirements.
Frequency range
380-470MHz
Input impedance
50Ω
VSWR
<2.0:1
Front to back ratio
8 dB
Maximum input power
50 W
Polarisation
Vertical & horizontal
Forward gain
4 dBi
Beamwidth
E-Plane 120º
H-Plane 130º
IM3
<-140dBc (2 x Tx@ 37dBm)
S.A.R.* Testing
EN50385:2002; 7.19W Touch Safe Level
*(Specific Absorption Rate)
Standard connection
‘N’ Socket on 150mm pigtail or antenna back
Materials
Aluminium, PTFE
SAR Tested
Radome
ABS Fire retardant, white RAL6014
Low PIM Certified
Weight
0.4 kg
Dimensions
292 x 292 x 76mm
H-Plane
E-Plane
Mounting Options
752.01.05.00
Antenna with
wall mount plate
Ordering Codes
Stock code
752.01.05.00
Frequency
380-470MHz
752.01.05.00
Antenna with
pole mount plate
and 60mm Ubolts
36
Issue 1 03/2013. E&OE
702.04-405
TETRA Four Element Donor Yagi Antenna
TM
communication
evolution
The 702 Series are of a rugged and reliable construction for UHF digital communication networks. The one piece folded dipole incorporates
a d.c. short to minimise static interference. The balun assembly is completely encapsulated in epoxy resin, totally preventing moisture
ingress, and has been tested to BS5490:IP67. These antennas give a gain of 7.5dBd with front to back ratio typically 15 dB, with minimal
rear lobes for repeater operation. They are supplied as standard with 3 metres of RG213 cable terminated with a 7/16 DIN type socket.
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
± 6% of centre frequency
VSWR
<1.5:1
Front to back ratio
15 dB
Maximum input power
150 Watts
Polarisation
Forward gain
7.5 dBd
3dB Beamwidth
E Plane 57º
H Plane 74º
IM3 (2 x Tx @43dBm)
-143dBc
Standard connection
Elements
Support boom
31.7 mm dia. x 2.6 mm wall alum. alloy grade 6082T6
Fasteners
Low PIM Certified
Saddle clamps
Diecast zinc alloy
Balun encapsulant
Direct grounded
Weight
2.3 kg
Length
0.9 m
Wind loading @ 45m/s
60 N
H-Plane
E-Plane
271 Series
Cast aluminium cross
clamp 30-60mm
Ordering Codes
Stock code
Frequency
702.04-405
380-430MHz
COP54
Galvanised steel
cross clamp 32/50mm
UA Series
clamp 25-115mm
37
Issue 1 03/2013. E&OE
702.08-405
TETRA Eight Element Donor Yagi Antenna
TM
communication
evolution
The 702 Series are of a rugged and reliable construction for UHF digital communication networks. The one piece folded dipole incorporates
ingress, and has been tested to BS5490:IP67. These antennas give a gain of 10dBd with front to back ratio typically 20dB, with minimal rear
lobes for repeater operation. They are supplied as standard with 3 metres of RG213 cable terminated with a 7/16 DIN type socket.
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to back ratio
20 dB
Maximum input power
150 Watts
Polarisation
Forward gain
10 dBd
3dB Beamwidth
E Plane 43º
H Plane 50º
IM3 (2 x Tx @43dBm)
-143dBc
Standard connection
Elements
Support boom
Fasteners
Low PIM Certified
Saddle clamps
Diecast zinc alloy
Balun encapsulant
Direct grounded
Weight
3.5 kg
Length
1.6 m
139 N
H-Plane
E-Plane
271 Series
clamp 30-60mm
Ordering Codes
Stock code
Frequency
702.08-405
380-430MHz
COP54
Galvanised steel
cross clamp 32/50mm
UA Series
clamp 25-115mm
38
Issue 1 03/2013. E&OE
S.CR-90-405
TETRA Corner Reflector Antenna
TM
communication
evolution
The S.CR consists of a centre fed folded dipole within a reflector screen forming a 'corner' . Two versions are available, one giving 60º sector
coverage, one giving 45º sector coverage, achieved by using 120º & 90º corner reflectors respectively. The antennas are designed for use
in harsh environments; the dipole boom & main vertical boom being of a fixed construction at UHF, and a welded galvanised mounting plate
at VHF. The two reflector arms are removable for flat pack transportation and ease of installation.
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to back ratio
20 dB
Maximum input power
150 Watts
Polarisation
Forward gain
10 dBd
3dB Beamwidth
H Plane 45º
E Plane 60º
Low PIM Certified
H-Plane
E-Plane
Standard connection
3m Length of RG 213 c/w 'N' type socket.
Elements
Support boom
Fasteners
Saddle clamps
Diecast zinc alloy
Balun encapsulant
Direct grounded
Mounting brackets
UA Series (not supplied)
Weight
13 kg
305 N
UA66-22
Cast aluminium
cross / parallel
clamp 25-50mm
Ordering Codes
Stock code
S.CR-90-405
Frequency
380-430
39
Issue 1 03/2013. E&OE
TM
communication
evolution
TETRA Fixed Mobile Antenna Product Range
Omnidirectional / Dipole Antennas
Type Designation
Description
Frequency band, MHz
Gain, dBd
Page
S.EFX-405
End Fed Glassfibre Dipole Antenna
380 - 430
0
41
S.1-405
Centre - Fed Folded Dipole Antenna
380 - 430
0
42
410.08.05.00-405
Centre - Fed Dipole Antenna
380 - 430
0
43
Gain, dBd
Page
Directional / Yagi Antennas
Type Designation
Description
Frequency band, MHz
S.3Y-405
Three Element Yagi Antenna
380 - 430
6
44
S.4Y-405
Four Element Yagi Antenna
380 - 430
7.5
45
S.6Y-405
Six Element Yagi Antenna
380 - 430
8
46
S.8Y-405
Eight Element Yagi Antenna
380 - 430
10
47
S.12Y-405
Twelve Element Yagi Antenna
380 - 430
12
48
S.18Y-405
Eighteen Element Yagi Antenna
380 - 430
14
49
40
S.EFX-405
TETRA End Fed Dipole Antenna
TM
communication
evolution
The S.EFX series of glassfibre dipoles are designed for professional base station and fixed mobile applications. The antennas have been
designed with an integral dual purpose mounting bracket, cast in aluminium. The stainless steel fittings enable the antennas to be fixed to
the top or side of a vertical pole up to 60mm diameter. The centre fed dipole is fed via coaxial cable, giving a stable radiation pattern over
a wide operating band. All S.EFX series are d.c. grounded. A VSWR of 1.5:1 is achieved over a bandwidth of ±6% of centre frequency.
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
±6% of centre frequency
VSWR
<1.5:1
H Plane ripple
< ±0.5 dB
Maximum input power
150 Watts
Polarisation
Vertical
Forward gain
0 dBd
3 dB Beamwidth
E Plane 80º
Connection
0.5m Length of RG 213 c/w 'N' type socket.
Dipoles
11mm dia brass tube
Dipole feeds
Shroud
Parallel grey glassfibre tube 26mm dia.
Direct grounded
Mounting bracket
Integral diecast aluminium alloy grade LM6
Suitable for horizontal or vertical pole mounting
H-Plane
E-Plane
Mast fixings
Stainless steel M8 V bolts grade A2-70
Weight
0.6kg
Length
650mm
Typical wind loading @ 45m/s
26N
CSB
Welded
Aluminium
Colinear
Standoff
Ordering Codes
Stock code
S.EFX-405
Frequency
380-430MHz
41
Issue 1 03/2013. E&OE
S.1-405
TETRA Centre Fed Folded Dipole Antenna
TM
communication
evolution
The S.1 series are of a rugged and reliable construction. The one piece folded dipole incorporates a d.c. short to minimise static interference.
The balun assembly is completely encapsulated in epoxy resin, totally preventing moisture ingress, and has been tested to BS5490:IP67.
These antennas can be arranged in a variety of arrays in combination with MH power splitters to produce a wide range of radiation patterns.
They are supplied as standard with 3m. of RG213 cable terminated with an 'N' type socket. Heavy duty and stainless steel options are
available.
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to back ratio
4 dB
Maximum input power
150 Watts
Polarisation
Vertical
Forward gain
2 dBd
3dB Beamwidth
E Plane 85º
H Plane 200º
(Gain & RPE assmes mount on conductive pole)
H-Plane
E-Plane
Standard connection
3m Length of RG 213 c/w 'N' type socket.
Elements
Support boom
31.7mm dia. x 2.6 mm wall alum. alloy grade 6082T6
Fasteners
Saddle clamps
Diecast zinc alloy
Insulator
Epoxy resin encapsulant
Direct grounded
Weight
1.9 kg
Length
1m
54 N
271 Series
clamp 30-60mm
COP54
Ordering Codes
Stock code
Frequency
S.1-405
380-430
S.1-380-470
380-470
Galvanised steel
cross clamp 32/50mm
UA Series
clamp 25-115mm
42
Issue 1 03/2013. E&OE
410.08.05.00
Glassfibre Centre Fed Dipole Antenna
TM
communication
evolution
The 410 Series are full half wave dipoles, with the feed point encapsulated in epoxy resin. The radiators are manufactured from copper wire
encased in glass fibre. Two part radiators are available below 50MHz for ease of transportation.The radiators are adjustable on site to
produce best performance. The 410 is supplied with an aluminium boom, and lends itself to producing multi-dipole arrays for various
radiation patterns. Both mast and wall brackets are available for the 410.
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
VSWR
<2.0:1
Front to back ratio
4 dB
Maximum input power
250 Watts
Polarisation
Vertical
Forward gain
2 dBd
3dB Beamwidth
E Plane 80º
H Plane 200º
(Gain & RPE assmes mount on conductive pole)
H-Plane
E-Plane
Connection
N socket
Radiators
Extruded glassfibre encased copper wire 8mm dia.
Support boom
25 mm x 2 mm wall square alum. alloy grade 6082T6
Fasteners
Centre mounting
Diecast aluminium alloy LM25
Insulator
Epoxy resin encapsulant
Weight
800g
Dimensions
320 x 285mm
13N
2184
Pole mout plate
To suit up to
60mm tube
Ordering Codes
Stock code
Frequency
410.08.05.00-395
380- 410
410.08.05.00-420
410-430
291.0200
Aluminium wall
mount bracket
43
Issue 1 03/2013. E&OE
S.3Y-405
TETRA Three Element Yagi Antenna
TM
communication
evolution
The S.3Y Series are of a rugged and reliable construction for communication networks at both VHF & UHF. The one piece folded dipole
incorporates a d.c. short to minimise static interference. The balun assembly is completely encapsulated in epoxy resin, totally preventing
moisture ingress, and has been tested to BS5490:IP67. These antennas give a gain of 6dBd with front to back ratio typically 15 dB. They
are supplied as standard with 3 metres of RG213 cable terminated with an 'N' type socket, although cable and connector options are
available upon request.
Frequency range
380 - 430 MHz
Input Impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to Back Ratio
15 dB
Maximum Input Power
150 Watts
Polarisation
Forward Gain
6 dBd
3 dB Beamwidth
E Plane 62º
H Plane 84º
H-Plane
E-Plane
Standard Connection
3m Length of RG213 c/w 'N' type socket
Elements
Support Boom
Fasteners
Saddle clamps
Diecast aluminium alloy
Balun encapsulant
Direct grounded
Weight
1.5 kg
Length
0.7m
52 N
271 Series
clamp 30-60mm
Ordering Codes
Stock code
S.3Y-405
Frequency
380-430MHz
COP54
Galvanised steel
cross clamp 32/50mm
UA Series
clamp 25-115mm
44
Issue 1 03/2013. E&OE
S.4Y-405
TETRA Four Element Yagi Antenna
TM
communication
evolution
moisture ingress, and has been tested to BS5490:IP67. These antennas give a gain of 7.5dBd with front to back ratio typically 15 dB. They
Frequency range
380 - 430 MHz
Input Impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to Back Ratio
15 dB
Maximum Input Power
150 Watts
Polarisation
Forward Gain
7.5 dBd
3 dB Beamwidth
E Plane 57º
H Plane 74º
H-Plane
E-Plane
Standard Connection
Elements
Support Boom
Fasteners
Saddle clamps
Balun encapsulant
Direct grounded
Weight
2.3kg
Length
0.9m
60 N
271 Series
clamp 30-60mm
Ordering Codes
Stock code
S.4Y-405
Frequency
380-430MHz
COP54
Galvanised steel
cross clamp 32/50mm
UA Series
clamp 25-115mm
45
Issue 1 03/2013. E&OE
S.6Y-405
TETRA Six Element Yagi Antenna
TM
communication
evolution
moisture ingress, and has been tested to BS5490:IP67. These antennas give a gain of 8.5dBd with front to back ratio typically 16 dB. They
Frequency range
380 - 430 MHz
Input Impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to Back Ratio
16 dB
Maximum Input Power
150 Watts
Polarisation
Forward Gain
8.5 dBd
3 dB Beamwidth
E Plane 56º
H Plane 63º
H-Plane
E-Plane
Standard Connection
Elements
Support Boom
Fasteners
Saddle clamps
Balun encapsulant
Direct grounded
Weight
2.7 kg
Length
1.3m
100 N
271 Series
clamp 30-60mm
Ordering Codes
Stock code
S.6Y-405
Frequency
380-430MHz
COP54
Galvanised steel
cross clamp 32/50mm
UA Series
clamp 25-115mm
46
Issue 1 03/2013. E&OE
S.8Y-405
TETRA Eight Element Yagi Antenna
TM
communication
evolution
The S.8Y Series are of a rugged and reliable construction for long range communication networks at both VHF & UHF. The one piece
folded dipole incorporates a d.c. short to minimise static interference. The balun assembly is completely encapsulated in epoxy resin, totally
preventing moisture ingress, and has been tested to BS5490:IP67. These antennas give a gain of 10dBd with front to back ratio typically
18dB. They are supplied as standard with 3 metres of RG213 cable terminated with an 'N' type socket, although cable and connector
options are available upon request.
Frequency range
380 - 430 MHz
Input Impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to Back Ratio
18 dB
Maximum Input Power
150 Watts
Polarisation
Forward Gain
10 dBd
3 dB Beamwidth
E Plane 43º
H Plane 50º
H-Plane
E-Plane
Standard Connection
Elements
Support Boom
Fasteners
Saddle clamps
Balun encapsulant
Direct grounded
Weight
3 kg
Length
1.6m
127 N
271 Series
clamp 30-60mm
Ordering Codes
Stock code
S.8Y-405
Frequency
380-430MHz
COP54
Galvanised steel
cross clamp 32/50mm
UA Series
clamp 25-115mm
47
Issue 1 03/2013. E&OE
S.12Y-405
TETRA Twelve Element Yagi Antenna
TM
communication
evolution
The S.12Y Series offer high gain from a highly directive radiation pattern for use in UHF link systems The one piece folded dipole incorporates
ingress, and has been tested to BS5490:IP67. These antennas give a gain of 12dBd with front to back ratio typically 20dB. They are supplied
as standard with 3 metres of RG213 cable terminated with an 'N' type socket, although cable and connector options are available upon
request.
Frequency range
380 - 430 MHz
Input Impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to Back Ratio
20 dB
Maximum Input Power
150 Watts
Polarisation
Forward Gain
12 dBd
3 dB Beamwidth
E Plane 34º
H Plane 40º
H-Plane
E-Plane
Standard Connection
Elements
Support Boom
Fasteners
Saddle clamps
Balun encapsulant
Direct grounded
Weight
4.5 kg
Length
2.1 m
150 N
271 Series
clamp 30-60mm
Ordering Codes
Stock code
S.12Y-405
Frequency
380-430MHz
COP54
Galvanised steel
cross clamp 32/50mm
UA Series
clamp 25-115mm
48
Issue 1 03/2013. E&OE
S.18Y-405
TETRA Eighteen Element Yagi Antenna
TM
communication
evolution
The S.18Y series offer high gain from a highly directive radiation pattern for use in UHF link systems gain together with a four element
reflector giving high protection from unwanted signals. The one piece folded dipole incorporates a d.c. short to minimise static interference.
The balun assembly is completely encapsulated in epoxy resin, totally preventing moisture ingress, and has been tested to BS5490:IP67.
These antennas give a gain of 14.7dBd with front to back ratio typically 25dB. They are supplied as standard with 3 metres of RG213 cable
terminated with an 'N' type socket, although cable and connector options are available upon request.
Frequency range
380 - 430 MHz
Input Impedance
50Ω
Bandwidth
VSWR
<1.5:1
Front to Back Ratio
25 dB
Maximum Input Power
150 Watts
Polarisation
Forward Gain
14.7 dBd
3 dB Beamwidth
E Plane 24º
H Plane 32º
Elements
Support Boom
Fasteners
Saddle clamps
Balun encapsulant
Direct grounded
Weight
7 kg
Length
3.2m
248 N
An underboom (UB3) or non-conductive support kit (NYK100) is recommended when end-mounting this antenna.
H-Plane
Standard Connection
E-Plane
271 Series
clamp 30-60mm
Ordering Codes
Stock code
S.18Y-405
Frequency
380-430MHz
UA Series
clamp 25-115mm
UB3
Aluminium
Underboom
49
Issue 1 03/2013. E&OE
TM
communication
evolution
TETRA Accessories - Power Splitters and Antenna Installation Equipment
Power Splitters
Type Designation
Description
Frequency band, MHz
Page
MH2-405
Two Way Cable Power Divider
380 - 430
51
MH3-405
Three Way Cable Power Divider
380 - 430
52
MH4-405
Four Way Cable Power Divider
380 - 430
53
MM Series
Machined Equal and Unequal Power Splitters
380 - 430
54
Description
Page
Antenna brackets
55
Antenna brackets and mounting steelwork
56
Mounting steelwork and accessories
57
50
MH2-405
TETRA Two Way Cable Power Splitter
TM
communication
evolution
The MH series of power splitters are manufactured using high quality coaxial cable and connectors. The MH power splitters use quarter
wave coaxial cable transformer sections to match two or more loads to one source. Phase shift can be incorporated to produce electrical
beam tilt with phased dipole arrays. The junction points on the MH power splitters are completely encapsulated with polyurethane resin
within a high grade aluminium tube totally preventing dust and moisture ingress.
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
VSWR
<1.3:1
Maximum input power
500 Watts
Input connection
1m Length RG213 c/w 'N' type female
Output connections
‘N’ type male on quarter-wave length RG11 cable
Body
Aluminium tube 38.1mm
Insulator
Polyurethane resin encapsulant
Ordering Codes
Stock code
MH2-405
Frequency
380-430MHz
51
Issue 1 03/2013. E&OE
MH3-405
TETRA Three Way Cable Power Splitter
TM
communication
evolution
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
VSWR
<1.3:1
Maximum input power
500 Watts
Input connection
Output connections
‘N’ type male on 0.5m RG213
Body
Insulator
Ordering Codes
Stock code
MH3-405
Frequency
380-430MHz
52
Issue 1 03/2013. E&OE
MH4-405
TETRA Four Way Cable Power Splitter
TM
communication
evolution
Frequency range
380 - 430 MHz
Input impedance
50Ω
Bandwidth
VSWR
<1.3:1
Maximum input power
500 Watts
Input connection
Output connections
‘N’ type male on 0.5m RG213
Body
Insulator
Ordering Codes
Stock code
MH4-405
Frequency
380-430MHz
53
Issue 1 03/2013. E&OE
TM
communication
evolution
MM Series
TETRA Machined Equal and Unequal Power Splitters
The MM and MM-U series of power splitters are manufactured to a high engineering standard utilising high quality machined components
of both aluminium and brass, offering precision matching through custom transmission line quarter wave transformers which gives a very
high degree of performance and reliability in the field. The MM-U series power splitters offer the same qualities as the MM series, although
offer unequal power splitting options of your choice. The MM-U is widely used with radiating cable systems & specialised antenna array
configurations. Connector and colour options are available.
Product codes, equal splitters
MM2-405 Two way power splitter
MM3-405 Three way power splitter
MM4-405 Four way power splitter
Product codes, unequal splitters
MM2U-405 Two way unequal power splitter
(specify split ratio at time or order)
MM3U-405 Three way unequal power splitter
MM4U-405 Four way unequal power splitter
Frequency range
380 - 430MHz
Input impedance
50Ω
Bandwidth
VSWR
<1.3:1
Power split ratio
From 1:1 to 10:1
Maximum input power
Up to 1kW
Connections
MMx-405 ‘N’ Socket
MMx-405-7 7/16 DIN Socket
Conductor
Brass rod
Dielectric
Air
Body
Welded aluminium tube
Finish
Polyester Coated
54
Issue 1 03/2013. E&OE
Antenna Brackets
TM
communication
evolution
A typical selection of mounting brackets and hardware. Other solutions are available and specialist requirements can be
manufactured to order. Please contact us for details.
UA64-23
Circular cast alloy clamp, gives a good two point fixing, supplied as standard with 4 x 50mm stainless steel
‘U’ bolts and two half-moon cast spacers to fit smaller antenna booms.
Tube 1 size:
25-50mm (1” - 2”) diameter
Tube 2 size:
50 or 76mm (2” or 3”) diameter (order UB06 ‘U’ bolts for 76mm dia.)
UA66-22
Very strong square cast alloy clamp, fits up to 50mm diameter tubes as either a cross-over or parallel clamp.
Supplied with two stainless steel ‘U’ bolts.
Tube 1 size:
25-50mm (1” - 2”) diameter
Tube 2 size:
25-50mm (1” - 2”) diameter
UA66-24
Rectangular cast alloy clamp, gives a good two point fixing, supplied as standard with 4 x 50mm stainless
steel ‘U’ bolts and two half-moon cast spacers to fit smaller antenna booms.
Tube 1 size:
25-50mm (1” - 2”) diameter
Tube 2 size:
50 / 76 / 100 / 115mm (2”, 3”, 4”, 4 1/2”) diameter
(Order ‘U’ bolts UB06 for 76mm, UB07 for 100mm, UB09 for 115mm)
COP 54
Standard cross-over plate mounting clamp, hot dipped galvanised steel plate supplied with spun galvanised
48.5mm ‘U’ bolts and stainless steel 32mm ‘U’ bolts. to fit 32mm diameter tubes. Slotted to accomodate ‘U’
bolts to fit 38mm diameter booms. Also available in Stainless Steel (order COP54SS)
Tube 1 size:
Tube 2 size:
48.4 / 50mm (1 29/32” - 2”) diameter
32-38mm (1 1/4” - 1 1/2”) diameter (supplied with 32mm ‘U’ bolts)
COP 55
Standard cross-over plate mounting clamp (50mm to 50mm), hot dipped galvanised steel plate supplied
with spun galvanised ‘U’ bolts to fit 50mm diameter tubes.
Tube 1 size:
48.4 / 50mm (1 29/32” - 2”) diameter
Tube 2 size:
48.4 / 50mm (1 29/32” - 2”) diameter
1763-100
Strong, yet low cost, galvanised steel cross-over clamp, fits 32mm (1-1/4”) diameter antenna booms to up
to 50mm (2”) diameter poles.
Tube 1 size:
48.4 / 50mm (1 29/32” - 2”) diameter
Tube 2 size:
32mm (1 1/4”) diameter
1763-187
Medium duty, low cost, galvanised steel cross-over/parallel clamp. The ‘V’ bolts can be turned through 90
degrees to change from cross-over to parallel configuration.
Tube 1 size:
48.4 / 50mm (1 29/32” - 2”) diameter
Tube 2 size:
32mm (1 1/4”) diameter
1763-37
Medium/light duty, low cost, galvanised steel cross-over/parallel clamp, fits 32mm-50mm diameter antenna
booms to up to 32mm-50mm diameter poles in either cross-over or parallel configuration.
Tube 1 size:
32 - 50mm (1 1/4” - 2”) diameter
Tube 2 size:
32 - 50mm (1 1/4” - 2”) diameter
55
Issue 1 03/2013. E&OE
Antenna Brackets and Mounting Steelwork
TM
communication
evolution
2140.01.00.00
Parallel clamps, in galvanised steel with stainless steel fixings, fits from 25-60mm diameter tubes.
Tube 1 size:
Tube 2 size:
25 - 60mm (1” - 2 3/8”) diameter
25 - 60mm (1” - 2 3/8”) diameter
2141.01.00.00
Parallel clamps, in galvanised steel with stainless steel fixings, fits from 38-120mm diameter tubes.
Tube 1 size:
38 - 120mm (1 1/2” - 4 3/4”) diameter
Tube 2 size:
38 - 120mm (1 1/2” - 4 3/4”) diameter
83210
‘Norstel’ type galvanised drop forged steel clamp, fixed 90 degree double coupler. Made to fit standard
48.4mm diameter scaffold tubes.
Tube 1 size:
48.4 / 50mm (1 29/32” - 2”) diameter
Tube 2 size:
48.4 / 50mm (1 29/32” - 2”) diameter
83220
‘Norstel’ type galvanised drop forged steel clamp, swivelling double coupler. Made to fit standard 48.4mm
diameter scaffold tubes. (Note: cannot be locked into position)
Tube 1 size:
48.4 / 50mm (1 29/32” - 2”) diameter
Tube 2 size:
48.4 / 50mm (1 29/32” - 2”) diameter
83225
1/2 ‘Norstel’ galvanised, drop forged steel clamp, complete with bolt and nut set for fixing through a plate.
Made to fit standard 48.4mm diameter scaffold tubes.
Tube 1 size:
48.4 / 50mm (1 29/32” - 2”) diameter
13072
Cast Aluminium increasing sleeves to fit antenna booms of 32mm (1-1/4”) diameter into the ‘Norstel’ type
clamps above
CWB15
Hot Dipped Galvanised Steel (RSC) wall stand-off bracket pair, supplied with ‘U’ bolts (50mm) and M10 wall
anchors. Secures 50mm diameter mast to wall with 150mm stand-off
AM47
Hot Dipped Galvanised Steel (RSC) wall stand-off bracket pair, supplied with 83225 Half Norstel Clamps and
M10 wall anchors. Secures 50mm diameter mast to wall with 150mm stand-off
SWB30, SWB45, SWB60
High quality stand-off wall brackets (T&K type) made in hot dipped galvanised steel and supplied with all
necessary ‘U’ bolts and M10 wall anchors to fix a 50mm diameter mast to a brick / concrete wall.
SWB30
SWB45
SWB60
300mm stand-off
450mm stand-off
600mm stand-off
56
Issue 1 03/2013. E&OE
TM
communication
evolution
Mounting Steelwork and Accessories
UB3
Aluminium support underboom for yagi antennas such as 12 element and in particular, 18 element UHF Yagi
antennas, supplied complete with cast aluminium clamps for attaching to antenna boom.
CSB
All welded aluminium twin boom antenna stand-off frame suitable for mounting end-fed, colinear or UHF
stacked dipole antennas off the side of a mast or tower structure. Total frame width 1500mm.
AT5, ST5
Heavy duty scaffolding tubes (drawn tube; 6082 T6) for mounting antennas. 48.5mm diameter, available in any
length up to 6m. Available as aluminium drawn tube, grade 6082 T6 (order AT5) or glavanised steel tube
(order ST5)
TAPE KIT
Weather proofing kit for cable / connector joints, consisting of 1 roll of Butyl Mastic (self amalgamating) tape
and 1 roll of high quality PVC adhesive tape.
(Kit will enable up to 9-10 joints with 1/2” foam feeder cable / antenna joints to be treated.)
57
Issue 1 03/2013. E&OE

Skymasts TETRA Antenna Product Catalogue 2013

Transcription

Similar documents

ANTENNAS DIRECT® DB4e

Select Design Premium Conversions

CXL 2-1HD-PT

NEC Tutorial

DIGITAL TV ANTENNA?

Spec Sheet - AirGizmos

Stealth Antennas

Owner`s Manual

cobra 142gtl om parts list

Owner`s Manual