Universal Grinding Machine for the highest demands

Universal Grinding Machine for the highest demands

KEL-UNIVERSAL
Produkte-Übersicht
Universal Grinding Machine for
the highest demands
1
KEL-UNIVERSAL – The traditional universal grinding machine
Workhead
n 6-600 min-1
with work holder MT5
adapter flange DIN 55026 #5
2
Adapterflange DIN 55027
with work holder MT5
adapter flange DIN 55027 #5
spring collets B32
1
2 1 = 160 Nm
2 = 130 kg
F
F
l
Splash guard
to be used with standard workhead
mounted on linear roller bearings
Sine bar attachment
direct fine angular setting by using
gauge blocks
when grinding chucked workpieces
with inside or outside tapers
KEL-UNIVERSAL for grinding jobs in
tool and die maker shops, for the grinding of small batches of components or
of prototype pieces, for maintenance jobs,
laboratories or special machine building
facilities.
Machine base with high static and dynamic rigidity.
Optimal bracing
Generously dimensioned and precision
scraped V- and flat guideways
guarantee a long lifetime of quality
Three point set-up, no special
foundation required
Workhead with its preloaded highprecision roller bearings is designed for
a working capacity of up to max. 130 kg
between centres or of up to 160 Nm for
components taken-up in chucks.
Standard working accuracy
Roundness for chucked work:
Delta R<0.5 µm according to B.S. 3730.
Increased working accuracy
Delta R<0.2 µm according to B.S. 3730.
Accessoires:
Lever-operated clamping attachment
power chuck
KEL-UNIVERSAL
Tailstock with preloaded sleeve
Sleeve located in preloaded ball bearings
Morse taper MT4
retraction of sleeve 30 mm
Micro-adjustment of tailstock
adjustment range +/- 15 µm
1 division 0.1 µm
Upper table
anti-friction bearing pivot pin
swivel on air cushion
Cast-iron machine base
optimal bracing
generously dimensioned and precision
scraped V- and flat guideways
Three point set-up
no special foundation required
for installation
Tailstock with preloaded sleeve
The solid tailstock offers many qualities.
Option
Micro-adjustment
Upper table with anti-friction bearing
pivot pin and fine adjustment of table swivel for cylindrical or taper corrections.
Longitudinal adjustment, manual or
hydraulic, with infinitely variable speed
from 0 – 6 m/min
Dwelling times on table-slide reversal
independently adjustable for both
sides
High reversal accuracy of +/- 0.01 mm
Shortest oscillation travel 2.5 mm
Hydraulic and central lubrication
system
Their arrangement completely separated
from the machine prevents undesirable
effects, such as heat, vibrations etc., on to
the machine base.
Automatic lubrication for the wheelslide and for the table-slide guideways
3
KEL-UNIVERSAL – Wheelhead
4
Wheelhead
for external, internal and face grinding
precision-balanced drive motor
High-precision spindle bearings
hydrodynamic spindle bearings
axial - radial
adjustable clearance
Cross-slide
Travel 220 mm
Rapid traverse 40 mm
combined guide device
External cylindrical grinding
configuration with grinding wheel on
the lefthand side for external
cylindrical grinding
grinding wheel ø 400 x 50 x 127 mm
Face grinding
configuration with grinding wheel on
righthand side for face grinding
grinding wheel ø 300 x 40 x 127 mm
Wheelhead
The universal wheelhead U has been designed for OD-, face- and ID-grinding in
a single set-up. Roundness, concentricity
and axial run out values of less than 1 µm
can thus be achieved.
Manual swivel on air cushion
Swivel range +5 / -195 degrees
Indexed position every 90 degrees
Manual clamping in any position
Motor output 3.6 kW
Grinding wheel 400 x 50 x 127 mm
The hydrodynamic bearings of the grinding wheel spindle and the finely balanced motor guarantee excellent surface
quality.
Cross-slide with built-in ”rise and fall“mechanism of the wheelhead. The total
wheelslide travel of 220 mm can be easily adjusted by a few turns of the infeed
handwheel, in its coarse position.
Torsion-stiff, direct infeed-mechanism
for cross-slide that moves on a
combined guide device
Preloaded lead screw nut without
backlash
Hydraulic rapid advance and retraction
with adjustable damping in the end
positions
KEL-UNIVERSAL
Internal grinding / Accessories
Internal grinding
internal grinding attachment with
80 mm bore
use of belt driven internal
grinding spindles
Internal grinding spindles
28’000
42’000
60’000
Swivelling dressing device
for wheel-dressing on
external-, face- or internal grinding
adjustable to final work diameter
1 single-point diamond of app. 0.5 carat
Radii-dressing device
for convexe and concave radii
range: 0–12 mm
fine adjustment by means of
micrometer screw
Lateral and angular dressing device
for dressing of the grinding wheels on the
periphery and on both sides
swivel range: 0–90 degrees
for diamond tools with shank Morse taper 0
Internal grinding
ID-grinding attachment with bore 80 mm
for belt-driven grinding spindles.
Belt guard
Manually operated wheel guard
Coolant feed through workhead spindle
Riser blocks
The very rigid machine construction and
the large dimensions of the slide ways allow the high-precision grinding of workpieces with large diameters. To increase the
working range , the center height of 175
mm can be increased to 250 mm by using
riser blocks.
5
KEL-UNIVERSAL – Operating
6
Handwheel with micro-adjustment
Electro-control panel
Digital read-out
for infeed of cross-slide and/or the
table-slide movement
1 control unit; resolution of 0.001 mm
scales Heidenhain LS 403C
Gap control
to reduce the air-gap feed time in case
of varying stock removal amounts
operating and control unit
sensor mounted on wheelhead
In-process gauge systems
for workpieces with
uninterrupted surfaces
for workpieces with uninterrupted
and interrupted surfaces
1
1
2
3
4
2
3
4
5
6
7
Shiftknob coarse/fine
Table-motion handwheel
Inching-button for workspindle
Spark-out time/Strokes
5
6
7
8
8
9
10
Single-lever control
Infeed selector
Table reversing dwell
Table reversal
Technical data
The Kellenberger cockpit combines ease
of use with its ergonomic design. The clear
and unobstructed arrangement of the controls assures an optimal operation-comfort.
The automatic working cycle and the
single lever control are the essential elements for the easy operating.
Automatic cycle by preselecting of:
infeed rates
Changeover position roughing/finishing
Infeed mode
Spark-out
Cut-off
Stock removal on rough grinding
max. 0.9 mm/dia.
Stock removal on finish grinding
max. 0.05 mm/dia.
Machine type
Main specifications
Distance between centres
mm
Grinding length
mm
Centre height
mm
Weight of workpiece between centres
kg
Load on chucked work
Nm
Mains voltage required
Power consumption depending on equipment A
Space required / length x width
mm
Longitudinal / slide: Z-axis
Travel
mm
Rapid traverse speed
m/min
Swivelling range of upper table
degree
Wheelslide: X-axis
Travel
mm
Swivel devices
Man. indexing / 2 .5° Hirth coupling
Swivelling range
degree
Wheelhead general
Drive motor
kW
Peripheral grinding wheel speed
m/s
600
600
1000
1500
1000
1500
175 – 250
130
160
3 x 400V / 50 Hz / 3 x 460V / 60 Hz
25
3210 x 2100
4220 x 2100
5560 x 2100
900
11
11
1300
6
9
220 / 40
all 90° / infinitely positioning
+5 -195
3.6 kW air cooled
35
1750
7
KEL-UNIVERSAL
Accessories
Size measuring device
for workpieces with
uninterrupted surfaces
control unit
manually operated measuring frame
Permanent magnetic chucks
Three-jaw chuck
Lever-operated clamping attachment
for the use of spring collets Schaublin
B32 or Hardinge 5C
adapter delivered with standard
equipment
12 13 14 15
16
Two-jaw steady rest
Three-jaw steady rest
9 Table speed
10 Rapid motion control
11 Infeed interruption
and acceleration
12 Cross-slide handwheel
13
14
15
16
Infeed zero-dead stop
Shiftknob coarse-gear
Infeed dial-ring clamping
Handwheel clamping
Paperband coolant unit
for the cleaning of the coolant
by means of automatically fed
filtration paper
Space required
Wheelhead UR
Grinding wheel dimensions, lefthand side
Grinding wheel dimensions, righthand side
option
Internal grinding attachment
Bore for spindles up to
Motor output
Workhead
Rotational spindle speed
Driving torque spindle
Spindle nose / internal taper
Swivelling range
option
Tailstock
Internal taper
Retraction of sleeve
Micro-adjustment
option
Control system
Control system
Measuring systems
Gap Control
In-process gauging
mm
400 x 50 x 127
mm
300 x 40 x 127
mm
kW
80
main motor
min-1
Nm
degree
mm
µm
6 – 600
36
MT5 / adapter ASA5
-30 +120
MT4
30
+ / -15
hydraulic control
Marposs
Marposs
All specifications and designs are subject to alterations without notice
7
Competence and a world-wide partnership
8
First-class sales and service organization for all the major international
markets with local well-trained staff.
KELLENBERGER guarantees expert advice and support for evaluation, purchase, installation and services of our
high-quality grinding systems.
L. Kellenberger & Co. AG
Heiligkreuzstrasse 28
9009 St.Gallen / Switzerland
Phone +41 (0) 71 242 91 11
Fax
+41 (0) 71 242 92 22
www.kellenberger.net
info@kellenberger.net
Sales and service in USA
and Canada:
Hardinge Inc.
One Hardinge Drive
P.O. Box 1507
Elmira, New York 14902-1507 USA
Phone +1 (607) 734 2281
Fax
+1 (607) 735 0570
www.hardinge.com
www.kellenberger.com
info@kellenberger.com
Sales and service in Great Britain
and The Republic of Ireland:
dM
m
ste
ISO
anagement
Sy
Cert
ifie
Your local KELLENBERGER Partner:
Hardinge Machine Tools Limited
Silverton Road, Matford Park,
Marsh Barton, Exeter,
Devon EX2 8NN
Phone +44 (01) 392 208 181
Fax
+44 (01) 392 208 199
www.hardinge.com
9001: 2000