RMC Arch may08:RMC Template01

www.rigidized.com
architectural products
RIGIDIZED® DEEP TEXTURED
HIGH
PERFORMANCE
A R C H I T E C T U R A L M E TA L S
EXCEPTIONAL FINISHES AND
CUSTOM FABRICATED PRODUCTS
RIGIDIZED® METALS
ARE A GREAT MARRIAGE
OF BEAUTY AND UTILITY
ABOVE/BELOW RIGIDIZED® PATTERN 6.WL® COLUMN COVERS AND WALL PANELS
MIAMI INTERNATIONAL AIRPORT : SOUTH TERMINAL : CONCOURSE J
ARCHITECT : BORRELLI & ASSOCIATES ARCHITECTS PLANNERS, P.A.
MATEU, CARRENO, RIZO & PARTNERS, INC. : A JOINT VENTURE
ABOVE CUSTOM KITCHEN BACKSPLASHES AND COUNTERTOPS FABRICATED BY
RIGIDIZED® METALS CORP.
RIGIDIZED® METALS ARCHITECTURAL PRODUCTS
what we do:
we texture metals.
DEEP TEXTURED METALS KNOWN WORLD-WIDE AS “RIGIDIZED” METALS:
■
defy dents due to increased impact resistance.
■
resist scratches - reduced surface contact area results in fewer scratches.
■
reduce “oil canning” - patterned finishes improve optical flatness.
■
save money - increased durability provides long term cost savings.
■
save weight - increased strength allows in the use of lighter gauges.
■
control reflections - patterns dissipate light and eliminate glare.
we finish metals.
DRAMATIC METAL FINISHES INCLUDE:
■
powder coated and highlighted stainless steel.
■
stunning colored stainless steel.
■
low reflectivity matte finish stainless steel.
■
“coined” linen, squares and sand-tex stainless steel.
■
vibration non-directional polish stainless steel.
■
random swirl stainless steel.
■
bead blasted stainless steel.
we fabricate metals.
WE MANUFACTURE:
■
wall panel and cladding systems.
■
counter tops and integrated sinks.
■
backsplashes.
■
metal faced tiles.
■
custom metal fabrications.
we supply metals.
WE SELL RIGIDIZED® METALS TO MANUFACTURERS OF:
■
building exteriors.
■
elevator interiors and doors.
■
column covers.
■
restroom partitions.
■
handrails and railings.
■
custom metal fabrications.
www.rigidized.com
1
RIGIDIZED® METALS
we texture metals : deep textured patterns
WE BEGIN THE VALUE ADDED PROCESS OF TEXTURIZING OR “RIGIDIZING” with ordinary sheet metals
including stainless steel, aluminum, copper, brass and steel. The “Rigidizing “ process strengthens sheet metal
which increases impact resistance. Rigidized® Metals also control reflections thereby hiding scratches and eliminating unwanted oil-canning. Textures are manufactured 14 different widths, lengths and gauges. Please refer to back
cover for more information.
Rigidized® metals are used for elevators, walls, floors, ceilings, columns. restroom partitions and countless
applications where metallic beauty and long-term durability are important to reducing maintenance costs.
”
36
WIDE
2
”
48
WIDE
”
60
WIDE
■ 4.LB
■ 5.WL®
■ 2.FL
■ 6.HC
■ 1.SLG
■ 6.WL®
■ 6.SL
■ 1.CS
■ 7.DL
■ 1.HM
■ 2.WL®
■ 1.UN
■ 3.ND
■ RSS 3
■ RTP
■ 1.RL
■ 60.LTH
■ 1.NA®
■ SAND-TEX
■ LINEN
■ SQUARES
PATTERNS MAY NOT BE SHOWN ACTUAL SIZE.
we finish metals : textured : RIGI-BUMP
®
RIGI-BUMP® CUSTOM ARCHITECTURAL PATTERNS offer unique three dimensional effects in metal.
They are available in a wide selection of patterns including custom designs, metals, gauges,
colors and finishes. Sheet widths up to 60˝ and lengths up to 144˝.
RIGI-BUMP® IS AVAILABLE
IN ALL FINISHES AND COLORS.
“KNURLED” RIGI-BUMP® IS SUITABLE FOR FLOORING.
RB.3® HIGHLIGHTED IN RED
RB.5® KNURL
RB.9® KNURL
RB.1® 1.0˝ FLAT TOP
RB.2® .750˝ DOME TOP
RB.3® 1.375˝ FLAT TOP
RB.4® .875˝ FLAT TOP
RB.5® .375˝ DOME TOP
RB.6® .250˝ DOME TOP
RB.7® .750˝ DOME TOP
RB.8® 1.5˝ DOME TOP
RB.9® .625˝ FLAT TOP
RB.21® 1.5˝ FLAT TOP
RB.22® .250˝ FLAT TOP
RB.24® 1.0˝ DOME TOP
RIGI-BUMP BACKSPLASH
3
RIGIDIZED® METALS
we finish metals : finishes & colors
THE SELECTION AND SPECIFICATION OF RIGIDIZED® SHEET METAL PRODUCTS begin with metal type (stainless, aluminum, etc), then finish
(satin, mirror, etc) and lastly pattern (5.WL, 6.WL etc). We offer several standard and custom finishes to enhance the beauty and performance of
products made from RIGIDIZED®. See it all come together: Combine Metal, Finish and Pattern Color.
B
A
C
+
SELECT METAL, FINISH, COLOR
=
NOTE: Not all RIGIDIZED®
finishes are, patterns and colors
can be combined. Please phone
our sales staff for availability.
PATTERN
STANDARD AND CUSTOM
FINISHES INCLUDE:
4
#3 SATIN
#4 SATIN
HAIRLINE
BRIGHT ANNEALED
#8 MIRROR
RND VIBRATION
RANDOM SWIRL
MATTE
BRIGHT BEAD BLAST
2B & HIGHLIGHTED IN 2.FL
DULL BEAD BLAST
MILL FINISH ALUMINUM
SPECULAR ALUMINUM
MILL FINISH COPPER
MILL FINISH BRASS
BRASS SATIN FINISH
MUNTZ MILL
MUNTZ SATIN
Brass American Yellow is 33% Zinc and 67% Copper, whereas Muntz is 40% Zinc and 60% Copper. The difference
between the two being that Brass is more yellow in color and Muntz is darker and more corrosive resistant.
PATTERNS MAY NOT BE SHOWN ACTUAL SIZE.
we finish metals : finishes & colors
COLORED/PAINTED & HIGHLIGHTED
*IMAGES MAY NOT ACCURATELY REPRESENT ACTUAL COLOR. PLEASE ORDER SAMPLE.
TITANIUM NITRIDE COLORED STAINLESS STEEL
WE OFFER TWO TYPES OF COLORING ON STAINLESS STEEL: Titanium nitride coloring is an extremely hard. inert, thin, transparent molecular
bonded ceramic coating that protects and beautifies stainless. TiNi colors include golds, bronzes, blues and blacks. Powder coatings are extremely durable
electronically charged and baked on polyurethane enamels. Powder coating colors include RAL colors, transparencies and special textured finishes.
The highlighting process is sanding off the tops of RIGIDIZED® textures and can be applied to all colored and powder coated RIGIDIZED® textures.
TI GOLD #4 SATIN
TI ROSE GOLD #4 SATIN
TI COFFEE #4
TI BRONZE #4 SATIN
TI BLACK #4 SATIN
TI GOLD HAIRLINE
TI ROSE GOLD HAIRLINE
TI COFFEE HAIRLINE
TI BRONZE #4 HAIRLINE
TI BLACK HAIRLINE
TI GOLD MIRROR
TI ROSE GOLD MIRROR
TI COFFEE #8
TI BRONZE #8
TI BLACK #4 SATIN
BLUE MIRROR
BLUE SATIN
TI COFFEE SANDBLAST
TI BRONZE BEADBLAST
TI BRONZE VIBRATION
DELAWARE IN BLACK
COBBLESTONE IN BLACK
RICHMOND IN BLACK
ALLEN IN BLACK
NIAGARA IN GRAY
MIDDLESEX IN BLUE MIRROR
VIRGINIA IN BLUE MIRROR
ELMWOOD IN BLUE
NOTTINGHAM IN BRONZE
ARLINGTON IN BLUE MIRROR
*PATTERNS MAY NOT BE SHOWN ACTUAL SIZE..
*IMAGES MAY NOT ACCURATELY REPRESENT ACTUAL COLOR. PLEASE ORDER SAMPLE.
5
RIGIDIZED® METALS
we fabricate metals : quilt pattern backsplashes
Rigidized® quilt patterns are
offered in various finishes
including two-tone embossed.
CUSTOM BACKSPLASH IN HARLEQUIN PATTERN
DIAGONAL
3.978˝ squares,
5.625˝ point to point
CHECKERBOARD
6
3.978˝ squares
PATTERNS MAY NOT BE SHOWN ACTUAL SIZE.
HARLEQUIN
3.978˝ squares
5.625˝ point to point
SQUARE
3.978˝ squares
DIAMOND
5˝ high point to point [vertical],
2.435˝ point to point [horizontal]
3.QLT®
3˝ squares
4.25˝ point to point
MOSAIC
5˝ high point to point [vertical],
2.435˝ point to point [horizontal]
we fabricate metals : custom-fabricated
BACKSPLASHES AND
WALL CLADDING SYSTEMS
RIGIDIZED® WALL CLADDING AND BACKSPLASHES are easy to install because they
are made to fit perfectly with your exact specifications. They are installed in minutes with
two-sided tape and construction adhesive. Trim strips and corner mouldings complete the
easy installation for a professionally finished job. Our engineering staff creates fabrication
drawings from your sketches to insure proper fit.
CUSTOM BACKSPLASH IN MOSAIC PATTERN
PATTERN 1.CS IN COPPER
#4 FINISH STAINLESS STEEL
TRIM STRIPS AND MOULDINGS
A
A
OUTSIDE CORNER
B
DIVIDER BAR
C
B
A
B
C
1/16” 1-1/4” 1/2”
D
C
“J” MOULDING
D
INSIDE CORNER
A
D
B
C
A
B
C
5/16” 1/16” 3/4”
7
RIGIDIZED® METALS
we fabricate metals : custom metal panels
for interior and exterior applications
WALL PANEL SYSTEMS
RIGIDIZED® PANEL SYSTEMS offer an easy approach to specifying RIGIDIZED ® durable and decorative
metals. our wall panel systems are designed to meet the needs of high impact environments and
decorative spaces alike. Our metal panels are formed to your specifications and are hung with easy
to install demountable “Z” clip system. However, don’t expect to replace a RIGIDIZED ® deep textured
metal panel because they are engineered to last for decades.
PANEL DESIGNS INCLUDE [AND ARE NOT LIMITED TO]:
■
PAN FACE PANEL
Suitable for interior applications, the pan face panel has a formed pan
that is laminated to the core material and a backer sheet that provides
structural balance, strength and a suspension system platform.
■
PAN-IN-PAN PANEL
Suitable for interior and exterior applications, the pan-in-pan system has
a slightly smaller backer pan that seals the core material inside the panel.
The backer pan provides superior structural balance and strength.
■
HAT CHANNEL PANEL
Suitable for both interior and exterior walls, hat channel panels do not
have a core, rather a hat channel that attaches to the pan face and
supports the suspension system.
PAN SYSTEM
MATERIALS
AND
PAN-IN PAN SYSTEM
FINISHES
RIGIDIZED® WALL PANELS are made from nearly all metals, finishes and textures. Panel face gauge selection is critical to durability.
We recommend a minimum of 20 gauge for RIGIDIZED® deep textured face materials and 18 gauge for untextured surfaces. The added
strength of RIGIDIZED® patterned metal allows for use of lighter gauges while maintaining substantial impact resistance.
PANEL FACE AND BACKER
METAL THICKNESS
FINISHES
STAINLESS STEEL
T304, 316 & 430
.024” - .120”
ALL AVAILABLE
■
ALUMINUM
3003 & 5005 ALLOYS
.025” - .125”
MILL, CLEAR, SATIN ANODIZED
AND SPECULAR
■
BRONZE/MUNTZ
220 COMMERCIAL BRONZE
280 MUNTZ
.020” - .090”
ALL AVAILABLE
■
COPPER
.020” - .090”
ALL AVAILABLE
■
STEEL
.024” - .120”
ALL AVAILABLE
■
8
RIGIDIZED® METALS ARCHITECTURAL PRODUCTS
CORNERS, REVEALS
AND
JOINTS
CORNERS
Beautifully finished corners are the hallmark of a superior quality panel manufacturer. Corners exemplify
the attention to detail and pride in architectural panel construction. In the industry there are typically
®
two types of corner offered: open and welded. Not unlike our RIGIDIZED panel faces, our exclusive
®
formed corner is anything but typical. RIGIDIZED exclusive formed corners are revolutionary because
they require no notching or welding, making them perfect for colored and painted surfaces where retouching
is not an option.
FORMED
®
Formed corners are a feature of our lightweight aluminum honeycomb core panel. RIGIDIZED 20 gauge
panels boast the same impact resistance as panels made from 16 gauge ordinary sheet metal, which is
twice as thick. Cutting panel face material in half greatly reduces raw material costs and consumption.
®
A formed corner RIGIDIZED panel offers heavy-duty performance in a lightweight panel with a sealed
corner, typically only available in heavier gauges.
Welded corners are used with heavier gauge panels where corners need to be sealed for moisture or
aesthetic reasons.
WELD & POLISH
Open corners called notch and fold corners, are a popular choice for interior applications where moisture
is of little concern.
OPEN CORNER
“NOTCH & FOLD” CORNER
RIGIDIZED PANEL CORE MATERIALS
®
ALUMINUM HONEYCOMB
■
■
PLYWOOD
MEDIUM DENSITY
FIBERBOARD
ALUMINUM HONEYCOMB
MEDIUM DENSITY FIBERBOARD
ALUMINUM BACKER
HAT CHANNELS
1/4” TO 1”
1/2” TO 1”
■
PLYWOOD
1/2” TO 3/4”
■
HAT CHANNEL
1/2” TO 2”
PANEL SIZES
STAINLESS STEEL
WIDTH
59”
HEIGHT
143”
ALUMINUM
47”
143”
COPPER/BRONZE
47”
143”
9
RIGIDIZED® METALS
DEMOUNTABLE “Z” CLIP PANEL SUSPENSION SYSTEM
MADE FROM EXTRUDED ALUMINUM, “Z” clips are the most popular choice of
professional installers because they install in minutes and are a terrific value. “Z” clips
are available in a wide variety of widths and lengths, so there’s a “Z” cup for nearly all
panel installations.
Simply attach the wall “Z” clip (A) to wall surface (B) and drop in the factory
attached panel clip (C) and panel assembly (D).
Assembly details and 3-part CSI specifications available at www.rigidized.com.
D
C
A
B
REVEALS, JOINTS AND CORNERS
Options for where panels meet include a reveal joint and a butt joint. the reveal joint panel system uses metal strips or channels mounted to drywall and
“Z” clips are cut and fastened for suspension. Corners are clad with corner panels or angels.
REVEAL JOINT PANELS SHOWN IN 304 STAINLESS STEEL
WITH NON-DIRECTIONAL POLISH
REVEAL JOINT
10
BUTT JOINT PANELS SHOWN IN BRONZE COLORED
STAINLESS STEEL, PATTERN 1.CS
BUTT JOINT
RIGIDIZED® METALS ARCHITECTURAL PRODUCTS
CLEAR SATIN ANODIZED ALUMINUM WALL PANELS ABOVE
®
®
DAMAGE RESISTANT RIGIDIZED 6.WL STAINLESS PANELS. PANELS
MANUFACTURED WITH LIGHTWEIGHT HONEYCOMB CORE AND
®
HUNG WITH “Z” CLIP SYSTEM. MADE BY RIGIDIZED METALS CORP.
PROJECT: MIAMI INTERNATIONAL AIRPORT: SOUTH TERMINAL.
ARCHITECT: BORRELLI ASSOCIATES ARCHITECTS PLANNERS, PA,
MATEU, CARREND, RIZO & PARTNERS,INC, A JOINT VENTURE.
WAINSCOTING SYSTEMS
RIGIDIZED® METAL’S EXCLUSIVE TONGUE & GROVE
BEAD BOARD WAINSCOTING SYSTEM is easy to install
because the 8˝ wide wood-backed planks are interlocking.
Pre-drilled panels, corner mouldings and custom width end
panels complete the system.
PATTERN 1.BB IS AVAILABLE IN ALL ALLOYS AND FINISHES.
PATTERN 1.BB AND 2.CS
FINISH: 304SS #4
PATTERN 1.BB
FINISH: SAND-TEX
11
RIGIDIZED® METALS
column covers
OPTIONAL DESIGNS
HAIRLINE AND REVEAL
JOINT COLUMN COVERS
description
Custom fabricated column covers with vertical reveals
and horizontal splice and reveal joints.
column cover system components
■
■
■
Formed Rigidized® Metals
Brackets to floor and ceiling - formed steel
Vertical support strut - 12 gauge steel
material options
■
■
■
18 gauge to 13 gauge stainless steel
.050” to .120” aluminum sheet
.062” to .125” copper, brass, bronze and muntz
finish options
■
■
■
■
■
■
■
Rigidized® Deep Textured Architectural Metals
#4 Brushed - Satin and #8 Polished Stainless
#4 Brushed - Satin Aluminum
Copper - mill finish
Random swirl and Non-directional Finish Stainless
Colored Stainless Steel
Embossed Stainless Steel
joint design
■
■
Caulked joint (1A, 3A), 1/2 inch joint minimum
Channel filler (1) - 3/4 inch joint
dimensions
■
12
Max height 1 section: 10’
3 PART CSI SPECIFICATIONS AVAILABLE ON WWW.RIGIDIZED.COM
R I G I D I Z E D ® M E TA L S A R C H I T E C T U R A L A P P L I C AT I O N S
2
V
COLUMN
COVER
2A
CAULK STOP
V
CAULK
V
V
2, 2A
BACKER ROD
1
1
REVEAL JOINT
1A
CAULK REVEAL
VERTICAL JOINTS
FLOOR, SLAB, ROOF OR CEILING
3
HORIZONTAL
BUTT JOINT
HORIZONTAL
CAULK JOINT
1A
5
3A
V
UPPER
SECTION
3
COLUMN
COVER
3A
V
CAULK
JOINT
FORMED
LOWER
SECTION
2, 2A
V
5
RECESSED
TRIM RING
FLOOR, SLAB, ROOF OR CEILING
SQUARE COLUMN COVERS
MIN 14” SQUARE
MAX 28” SQUARE
MIN 24” SQUARE
MAX 56” SQUARE
2 SECTIONS
4 SECTIONS
MIN 30” SQUARE
MAX 48” SQUARE
4 SIDE SECTIONS
ROUND/RACETRACK COLUMN COVERS
MIN
DIAMETER 36”
MAX
DIAMETER 54”
MIN
DIAMETER 14”
MAX
DIAMETER 36”
2 SECTIONS
3 SECTIONS
MIN
DIAMETER 48”
MAX
DIAMETER 72”
4 SECTIONS
MIN
48” X 36”
MAX
60” X 96”
RACETRACK
13
RIGIDIZED® METALS
we fabricate metals : custom-fabricated countertops
CUSTOM COUNTERTOPS
RIGIDIZED® CUSTOM METAL COUNTERTOPS are made from
textured and plain stainless steel and copper. We offer a wide
variety of edge profiles, back splash styles and corner options.
Suitable for both commercial and residential applications, Rigidized
Custom Metal Countertops are available with integral sinks.
CUSTOM STAINLESS COUNTERTOP IN PATTERN 1.HM / VIBRATION FINISH
CUSTOM COUNTERTOP IN POLISHED AND TEXTURED STAINLESS
EDGE PROFILES
RADIUS COUNTERTOP BACKBOARD
14
SQUARE COUNTERTOP BACKBOARD
RADIUS CORNER COUNTERTOP
RADIUS EDGE
SQUARE CORNER COUNTERTOP
SQUARE EDGE
SQUARE EDGE WITH RETURN
SQUARE EDGE WITH 2 RETURNS
RIGIDIZED® METALS ARCHITECTURAL PRODUCTS
METAL-FACED TILE
RIGI-TILE
®
RIGI-TILE® METAL TILES As easy to install as ceramic tile, Rigi-Tile®
is a showcase for long-lasting beauty. Textured stainless steel tiles
are ideal for countertops, backsplashes, flooring, and walls. Innovative new
design promotes the adhesion of the grout to the tile substrate, allowing
unlimited design and layout possibilities.
■
■
■
Glued to Hardie® backer board
Cut with a wet saw
Available in sizes:
2” x 2” Square
4” x 4” Square
6” x 6” Square
Rigi-tile floor in 2.RL Stainless
#4 SATIN TILE
1.HM COPPER TILE
COPPER SATIN TILE
2.RL TILE
15
RIGIDIZED® METALS
we supply metals : for elevator surfaces,
handrails and restroom partitions
Wal-Mart®, the world’s largest retail chain,
specifies bathroom partitions manufactured with
RIGIDIZED® 5.WL® to dramatically reduce
maintenance costs, discourage vandalism and
enhance aesthetic appearance.
Offered by all metal partition manufacturers.
HISTORIC BROADWAY MARKET, BUFFALO, NY.
PHOTO COURTESY OF PETER C. MURAD, AIA,
AICP ARCHITECTURAL RESOURCES,
CITIES OF BUFFALO AND NEW YORK
16
PATTERNS 5.WL® AND 60.LTH® ARE 60 INCHES WIDE
FOR ADA COMPLIANT RESTROOM PARTITIONS
R I G I D I Z E D ® M E TA L S A R C H I T E C T U R A L A P P L I C AT I O N S
GET A HANDLE ON SAFETY
RIGI-GRIP
®
RIGI-GRIP® RIGIDIZED HANDRAILS
are perfect for railings, grab bars and
transportation holds, to limit and
prevent accidental injury.
■
Up to 6x more grippable than
ordinary handrail
■
1.25˝ and 1.50˝ OD standard
■
.060˝ and .048˝ wall thickness
■
Rigidized supplies textured tubes
to fabricators of handrail systems.
OFFERED IN PATTERN RGM
STAINLESS STEEL
ALLOY TYPES
useful information
THEORETICAL METAL WEIGHTS per square foot
STAINLESS STEEL/CRCS
10 GAUGE
11 GAUGE
12 GAUGE
13 GAUGE
14 GAUGE
16 GAUGE
18 GAUGE
20 GAUGE
22 GAUGE
24 GAUGE
26 GAUGE
28 GAUGE
THICKNESS
.135˝
.120˝
.105˝
.090˝
.075˝
.060˝
.048˝
.036˝
.029˝
.024˝
.018˝
.015˝
ALUMINUM
WT/SQ.FT.
5.68 LBS
5.04 LBS
4.41 LBS
3.78 LBS
3.10 LBS
2.50 LBS
2.00 LBS
1.50 LBS
1.20 LBS
1.03 LBS
0.76 LBS
.063 LBS
COPPER / BRASS / MUNTZ / BRONZE
32 OZ.
24 OZ.
20 OZ.
18 OZ.
16 OZ.
14 OZ.
12 OZ.
.090˝
.080˝
.062˝
.050˝
.043˝
.032˝
.027˝
.024˝
.021˝
.019˝
.016˝
3.99 LBS
3.62 LBS
2.92 LBS
2.22 LBS
1.89 LBS
1.5 LBS
1.25 LBS
1.13 LBS
1 LBS
0.875 LBS
0.75 LBS
THICKNESS
.125˝
.100˝
.090˝
.080˝
.063˝
.050˝
.040˝
.032˝
.025˝
.020˝
.016˝
.012˝
SHEET SIZE
36 x 96
36 x 120
36 x 144
48 x 96
48 x 120
48 x 144
60 x 96
60 x 120
60 x 144
WT/SQ.FT.
1.78 LBS
1.42 LBS
1.28 LBS
1.14 LBS
.884 LBS
.713 LBS
.57 LBS
.456 LBS
.356 LBS
.285 LBS
.228 LBS
.171 LBS
SQ. FT.
24
30
36
32
40
48
40
50
60
304 is the basic chromiumnickel austenitic stainless
steel and has been found
suitable for a wide range of
applications. It is the most
readily available in a variety of
product forms. This grade is
easy to form and fabricate
with excellent resistance to
corrosion.
316 offers more corrosionresistance through the
addition of molybdenum.
This grade is desirable where
the possibility of severe
corrosion exists, such as
heavy industrial, marine and
de-icing environments.
430 is a straight chromium
ferritic stainless steel with
lower corrosion resistance
than the 300 series.
It is principally employed
for interior use and is
magnetic.
17
RIGIDIZED® METALS
patterns : technical data
MINIMUM-MAXIMUM MATERIAL THICKNESS
Maximum Sheet Width
Pattern
Stainless Steel
Cold Rolled Carbon, Galvanized,
Aluminum, Copper, Brass, Bronze, Muntz
AVAILABLE IN
SHEETS UP TO 60˝
5.WL®
RTP® / RSS.3
60.LTH®
0.010˝ - 0.090˝
0.018˝ - 0.125˝
0.010˝ - 0.075˝
0.008˝ - 0.090˝
0.010˝ - 0.125˝
0.010˝ - 0.090˝
AVAILABLE IN
SHEETS UP TO 52˝
48˝ STANDARD
6.WL **
1.NA®, 4.LB®***
6.HC®**
2.WL®
1.RL®
2.FL®
3.ND®
6.SL®
7.DL
3.QLT®
1.UN
1.SLG®
0.010˝ - 0.105˝
0.018˝ - 0.075˝
0.024˝ - 0.105˝
0.015˝ - 0.024˝
0.018˝ - 0.125˝
0.024˝ - 0.125˝
0.018˝ - 0.036˝
0.018˝ - 0.060˝
0.036˝/.060˝/.075˝
0.024˝ - 0.029˝
0.018˝ - 0.125˝
0.010˝ - 0.048˝
0.008˝
0.010˝
0.024˝
0.008˝
0.018˝
0.020˝
0.024˝
0.024˝
N/A
0.024˝
0.018˝
0.010˝
1.HM®
1.CS®
0.010˝ - 0.036˝
0.018˝ - 0.075˝
0.010˝ - 0.040˝
0.010˝ - 0.080˝
U.S. Standard Gauges /
Nominal Thickness in Inches
10 /.141˝/3.58mm
®
-
0.125˝
0.090˝
0.105˝
0.025˝
0.125˝
0.125˝
0.040˝
0.125˝
11 /.120˝/3.04mm
12 /.105˝/2.66mm
14 /.075˝/1.91mm
16 /.060˝/1.52mm
18 /.048˝/1.22mm
- 0.029˝
- 0.125˝
- 0.060˝
20 /.036˝/.91mm
22 /.029˝/.74mm
24 /.024˝/.61mm
AVAILABLE IN
SHEETS UP TO 38˝
36˝ STANDARD
26 /.018˝/.46mm
28 /.015˝/.38mm
32 /.010˝/.25mm
RIGIDIZED® METALS CORPORATION IS THE ORIGINATOR OF THE TEXTURED
METAL PROCESS. RIGIDIZED® METALS ARE CREATED BY A UNIQUE PROCESS
THAT ENHANCES THE BEAUTY AND DURABILITY OF FLAT METAL. THERE
ARE DOZENS OF PATTERNS TO CHOOSE FROM, IN A WIDE SELECTION OF
METALS AND FINISHES, FOR USE IN ANY IMAGINABLE APPLICATION.
CALL RIGIDIZED® METALS TODAY 1-800-836-2580 FOR INFORMATION,
PRICING AND SAMPLES OF OUR PRODUCTS.
OR VISIT OUR WEBSITE:
www.rigidized.com
Rigidized® Metals Corporation
TOLL FREE
800.836.2580
|
PH
|
658 Ohio Street
716.849.4760
|
FAX
|
Buffalo, New York 14203
716.849.0401
|
WEB SITE
|
®
Standard Lengths: 96˝, 120˝, 144˝
■
*Maximum length 96”
■
** 6.WL and 6.HC are also
available at 0.125˝ thick stainless
steel sheets up to 36˝ wide.
■
*** 4.LB is available in 48”
max width
■
Please phone customer service
for specific finish, pattern
specifications, technical
information and free samples.
USA
www.rigidized.com
Rigidized and Rigid-Tex are registered trademarks. © 2008 by Rigidized Metals Corporation.
®
■
SEE US ON
ARCAT.COM