Compressed Air Filters

an EnPro Industries company
an EnPro Industries company
FILTERS
COALESCERS
ABSORBERS
ELEMENTS
MIST ELIMINATORS
COMPRESSED AIR FILTERS
Quincy filters protect pneumatic equipment
and processes from the harmful effects of contaminated compressed air by removing dirty
water, burnt oil and solid pollutants before
they can do any damage. Clean compressed air
will result in improved production and reduced
operating costs. World class, state-of-the-art
material and design make Quincy compressed
air filters the standard to which all others must
be compared.
STANDARD FILTERS
HIGH-TEMPERATURE
DUST FILTER
Quincy DCN Series
Particulate/Coarse Coalescers are designed to
remove solids, burnt oil and bulk liquids.
• +450°F/150 psig
• 15 to 1600 scfm
Quincy CSN, CPN, CXN Series
Coalescers remove various levels of liquid aerosols and mist.
Quincy ACN Series
Activated Carbon Absorbers remove vapors
and odors.
• 10 scfm to 16,500 scfm
• 230 psig max. working pressure
for threaded filters
• 150 psig max. working pressure
for flanged filters
• Aluminum housing (1⁄2” to 3” NPT)
• Steel housing (3” to 12” FLG)
MOISTURE SEPARATORS
Quincy Air Quality Performance Guarantee
• 20 to 1500 scfm, 230 psig
• Aluminum housing (1⁄4” to 3” NPT)
OVER & UNDER
COALESCER/ABSORBER
COMBINATION
• 10 to 50 scfm/230 psig
• Two-in-one design
QuincyCompressor.com | Made in the U.S.A. | Performance You Demand. Reliability You Trust.
2
ELEMENTS
Quincy’s Layered Multiwrap design employs a specially
blended borosilicate glass microfiber media to produce
strong, durable and efficient filter elements. The filtration
media combines high flow rates and high dirt-holding capaci-
ties without compromising element service life. Easy to identify and easy to install, these highly advanced products offer
the best performance available.
ELEMENT CONSTRUCTION
Push-to-Fit Design — Aluminum Filters
4th Stage Outer Stainless Steel Support
• Easy element replacement
• Ensures total element integrity
• Fit integrity eliminates leaks,
Inside to Out Flow
saving energy
Stainless Steel Support Core
• Prolongs element life and
improves drain performance
• Provides strength
Polyester Needle Felt Drainage Layer
• Eliminates corrosion
• Optimum oil removal
• Protects element from bursting
• High temperature tolerance
under high differential pressure
• Maximum durability
1 Stage Pre-Filtration Support Layer
• Will not disintegrate
• Captures larger contaminants
• Suitable for use with mineral
st
• Protects 2nd Stage filtration media
• Extends service life
Multiwrap 2nd Stage
• High void volume minimizes
pressure drop, saving energy
• Increased surface area ensures
maximum contaminant retention
and synthetic oils
• Tolerant in aggressive environments
Glass-Filled Nylon End Caps
• Color-coded for simple element
grade identification
• Easy element replacement
• Will not corrode
• Extended life construction
• Deep bed provides optimum
coalescing efficiency
• Selected media combinations
provide precise filtration solutions
3rd Stage Interceptor Layer
• Provides additional strength
• Optimizes interception process
3
COMPRESSED AIR FILTERS
STANDARD LINE: PARTICULA TE – COALESCER – ABSORBER
Quincy’s Standard Filtration lineup consists of
the three most common types of filters used in
compressed air systems. Aluminum housings
with threaded NPT connections are used for
flows up to 1530 cfm and steel housings with
flanged connections are used for flows up to
16,500 cfm.
• Push-to-fit design used on threaded filters for easy filter element replacement
• Multiwrap element construction ensures optimum performance
• Modular design saves energy and allows for easy installation
of multiple threaded filters
• Aluminum housings feature electrophoretic coating to prevent
corrosion
• 10-year housing guarantee on aluminum housings
• Standard pressure differential indicator on
aluminum housings
• Standard automatic condensate drain on
aluminum housings
ALUMINUM HOUSINGS, THREADED CONNECTIONS 10 TO 1530 CFM
DCNT SERIES
CSNT, CPNT, CXNT SERIES
ACNT SERIES
Designed to remove high
Designed to coalesce various
Activated Carbon Absorber
concentrations of solids,
levels of liquid aerosols. The 1
designed to remove vapors
burnt oil and bulk liquids
micron CSN is also an ideal afte
and odors. Installed imme-
filter for desiccant dryers.
dately downstream of either a
DCNT 5 micron, 5 ppm
CSNT 1 micron, 0.1 ppm
CPNT .01 micron, .01 ppm
CXNT .01 micron, .001 ppm
CPNT or a CXNT coalescer,
it will reduce oil carryover to .003 ppm.
STEEL HOUSINGS, FLANGED CONNECTIONS 1500 TO 16,000 CFM
SERIES DCNF, CSNF, CPNF, CXNF AND ACNF
• Same filtration grade as aluminum filters
• Identified with an “F” suffix
• U stamped for the USA and CRN approved for Canada
• Housings are freestanding and top loading for easy element replacement
• All grades of filter element end caps are molded, providing strength,
durability and long life
QuincyCompressor.com | Made in the U.S.A. | Performance You Demand. Reliability You Trust.
4
STANDARD LINE —­­­­SPECIFICATIONS & ENGINEERING DATA
Complete Filter Assemblies Element Number
Filter Model Pipe Size
Flow Rate
Model
of
A
(Grade)
NPT scfmNm3/hr
(Grade) Elements
In.
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
10
20
30
60
125
150
200
300
425
500
650
800
1000
1300
1525
⁄4
⁄4
3
⁄8
1
⁄2
3
⁄4
1
1
11⁄4
11⁄2
2
2
21⁄2
3
3
3
1
1
10
20
30
60
125
150
200
300
425
500
650
800
1000
1300
1525
17
33
50
100
208
250
333
500
708
833
1083
1333
1667
2167
2542
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
10
20
30
60
125
150
200
300
425
500
650
800
1000
1300
1525
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
3
11⁄2
3
11⁄2
3
11⁄2
31⁄211⁄4
5
11⁄2
5
11⁄2
5
11⁄2
5
11⁄2
51⁄22
51⁄22
51⁄2
2
8
2 3⁄4
8
2 3⁄4
8
2 3⁄4
9
2 1⁄2
8
3
8
3
8
3
13
4
15
4
15
4
21 6
21 6
22
6
22
6
30
6
32
8
32
8
37
8
42
12
Metric
Dimensions
B
C
D
mm
mm
mm
1.43
0.65
72
35
210
75
1.43
0.65
72
35
210
75
1.43
0.65
72
35
210
75
2.87
1.30
88
32
315
100
5.95
2.70
125
39
365
100
5.95
2.70
125
39
365
100
7.723.50 12539 515150
7.723.50 12539 515150
9.70
4.40
135
50
545
150
9.70
4.40
135
50
545
150
11.00
5.00
135
50
745
150
25.40
11.50
200
68
805
200
25.40
11.50
200
68
805
200
34.20
15.50
200
68
925
200
41.90
19.00
230
65
1050
300
B
Model Grades 1503, 1504
& 2004
A
A
C
C
Model Grades 2006–16512
B
Model Grades 10, 20 & 30
D
Model Grades 60–1525
Steel Housings — Flanged Element Number
Filter Model Pipe Size
Flow Rate
Model
of
A
(Grade)
Flg. scfmNm3/hr
(Grade) Elements
In.
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
1503
1504
2004
2006
3004
3006
4506
6008
10510
16512
3
4
4
6
4
6
6
8
10
12
1500 2550
1500 2550
2000 3400
2000 3400
3000 5100
3000 5100
4500 7650
6000 10200
10500 17850
16500 28050
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
1500
1500
2000
2000
3000
3000
1500
1500
1500
1500
1
1
1
1
1
1
3
4
7
11
D
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
58
15
48
10
58
171⁄8
48
61⁄2
58
213⁄8
481⁄4
13
591⁄4251⁄2
48
71⁄2
72
213⁄8621⁄4
13
75 1⁄4
25.5
64
71⁄2
831⁄2251⁄4681⁄2231⁄2
86 3⁄4
25
68
23
100
31
80
30
113 3⁄4
441⁄2
87
16
165
175
320
360
385
420
580
650
800
1000
74
80
145
163
175
191
263
295
363
454
1472
1473
1473
1505
1829
1911
2121
2203
2540
2889
Metric
Dimensions
B
C
D
mm
mm
mm
381
435
543
648
543
648
641
635
787
1130
1219
1219
1226
1219
1581
1626
1740
1727
2032
2210
Max.
Pressure Loss
Specs
Max.ParticleOil Carryover
Max.
Change
Filter Max. Particle Size Oil Content Class Removal
at 68˚F at 20˚C
Temperature
Clean & Dry
Wet
Element
Element to ISO 8573-1:2001 to ISO 8573-1:2001 in Microns
ppm
mg/m3
˚F
˚C
psi
mbar
psi
mbar
psi
mbar
Max.
Working
Pressure
psig barg
DCNE
CSNE
CPNE
CXNE
ACNE
232
232
232
232
232
3
2
1
1
1
4
2
1
1
1
5
1
0.01
0.01
0.01
5.0
0.1
0.01
0.001
0.003
5.0
0.1
0.01
0.001
0.003
248
248
248
248
77
120
120
120
120
25
1
1
2
2
1
40
75
100
140
75
1
2
4
5
—
75
6
400
150
6
400
300
6
400
350
6
400
— Min. every 6 months
16
16
16
16
16
254
165
330
191
330
191
597
584
762
406
Element
End Cap
Color
Code
Green
Red
Blue
Black
Black
Correction Factor
Operating psig
4
9
Pressure
barg 0.3
0.6
Correction Factor 0.21 0.29
15
29
44
1
2
3
0.38 0.53 0.65
58
72
87
4
5
6
0.76 0.84 0.92
100
7
1
115 130
8
9
1.07 1.13
145 160
10
11
1.19 1.25
174 189 203 218
12
13
14
15
1.31 1.36 1.41 1.46
232
16
1.51
For maximum flow rate, multiply model flow rate shown in the above table by the correction factor corresponding to the working pressure.
5
COMPRESSED AIR FILTERS
HIGH TEMPERATURE:
1 MICRON DUST FILTERS,450˚F, 150 PSIG
• Designed specifically for Heat Reactivated Desiccant Air Dryers
• Nomex outer layer is provided for high-temperature operation
• Push-to-fit design used on threaded filters for easy filter element replacement
• Multiwrap element construction provides optimum performance
ALUMINUM HOUSINGS,
THREADED NPT CONNECTIONS
15 TO 650 CFM,
SERIES HTDT
STEEL HOUSINGS,
FLANGED CONNECTIONS
1500 TO 16,000 CFM,
SERIES HTDF
• Features a high-temperature dust filter
• Same filtration grade as aluminum filters
with heavy-duty bowl
• Ribbed bowl facilitates removal when
changing elements
NOTE: Alloy filters shipped loose will have a special
high-temperature black powder coat paint.
• Identified with an “F” suffix
• U stamped for the USA and CRN approved
for Canada
• Housings are freestanding and top-loading
for easy element replacement
• All grades of filter element end caps are
molded, providing strength, durability
and long life
QuincyCompressor.com | Made in the U.S.A. | Performance You Demand. Reliability You Trust.
6
HIGH TEMPERATURE —­­­­SPECIFICATIONS & ENGINEERING DATA
Dust Filters — Threaded
Element Number
Filter Pipe Size
Flow Rate
Model
of
A
3
Model
NPT scfmNm /hr
(Grade) Elements
In.
HTDT
HTDT
HTDT
HTDT
HTDT
HTDT
HTDT
HTDT
15
30
65
75
150
300
450
650
⁄4
⁄8
1
⁄2
3
⁄4
1
11⁄2
2
2
1
3
15
30
65
75
150
300
450
650
25
50
108
125
250
500
750
1084
HTDE 15
HTDE 30
HTDE 65
HTDE 75
HTDE 150
HTDE 300
HTDE 450
HTDE 650
1
1
1
1
1
1
1
1
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
1
21⁄2
⁄2 6
1
21⁄2
⁄271⁄2
1
4 ⁄211⁄2
12
41⁄211⁄2
12
1
1
4 ⁄21 ⁄2151⁄2
3
5 ⁄4
2
21
53⁄4
2
21
3
5 ⁄4
2
25
2
2
6
6
6
7
7
7
Metric
Dimensions
B
C
D
mm
mm
mm
0.50.25 6315 15050
0.60.27 6315 19050
5.7
2.60
114
38
305
150
5.7
2.60
114
38
305
150
7.3
3.30
114
38
395
150
16.5
7.50
146
50
435
170
16.5
7.50
146
50
435
170
22.0
10.00
146
50
635
170
B
Models
HTDF 1503, 1504 and 2004
A
A
C
C
Models HTDF 2006–16512
B
Models
HTDT 15 & 30
Models
HTDT 65–650
D
Dust Filters — Flanged
Element Number
Filter Pipe Size
Flow Rate
Model
of
A
3
Model
Flg. scfmNm /hr
(Grade) Elements
In.
HTDF
HTDF
HTDF
HTDF
HTDF
HTDF
HTDF
HTDF
HTDF
HTDF
1503
3
1504
4
2004
4
2006
6
3004
4
3006
6
4506
6
6008
8
10510 10
16512 12
1500
1500
2000
2000
3000
3000
4500
6000
10500
16500
2550
2550
3400
3400
5100
5100
7650
10200
17850
28050
HTDE
HTDE
HTDE
HTDE
HTDE
HTDE
HTDE
HTDE
HTDE
HTDE
1500 1
1500 1
2000 1
2000 1
3000 1
3000 1
1500 3
1500 4
1500 7
1500 11
D
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
58
15
48
10
58
171⁄8
48
61⁄2
3
1
58
21 ⁄8
48 ⁄4
13
591⁄4
25.5
48
71⁄2
3
1
72
21 ⁄862 ⁄4
13
751⁄4251⁄2
64
71⁄2
1
1
1
83 ⁄225 ⁄468 ⁄2231⁄2
86 3⁄4
25
68
23
100
31
80
30
3
1
113 ⁄4
44 ⁄2
87
16
165
175
320
360
385
420
580
650
800
1000
74
80
145
163
175
191
263
295
363
454
1473
1473
1473
1505
1829
1911
2121
2203
2540
2889
Max.
Pressure Loss
Specs
Particle
Oil Carryover
Max.
Change
Filter Removal
at 68˚F at 20˚C Temperature
Clean & Dry
Wet
Element
3
Element
in Microns ppm
mg/m ˚F
˚C
psi
mbar
psi
mbar
psi
mbar
Max.
Working
Pressure
psig barg
Element
End Cap
Color
Code
High-temperature dust filter element grade
HTDE
1
2
2
450 250
150
Brick Red
1.1
75
NA
NA
6
400
10
Metric
Dimensions
B
C
D
mm
mm
mm
381
435
543
648
543
648
641
635
787
1130
1219
1219
1226
1219
1581
1626
1740
1727
2032
2210
254
165
330
191
330
191
597
584
762
406
Correction Factor
Operating psig 145 290
Pressure
barg 10
20
Correction Factor 0.34 0.57
435 580
30
40
0.71 0.86
725
50
1.0
For maximum flow rate, multiply model flow rate shown in the above table by the correction factor corresponding to the working pressure.
7
COMPRESSED AIR FILTERS
MECHANICAL MOISTURE SEPARATORS
20 TO 1500 CFM, 230 PSIG, SERIES WSNT
Quincy Mechanical Moisture Separators are
designed to remove bulk liquids and large
volumes of water. They are typically installed
downstream of aftercoolers, air receivers, refrigerated air dryers and at strategic points of use
throughout the compressed air distribution
system. The design employs an internal spinner to create a centrifugal action that effectively
removes large quantities of water.
• Large sump and quiet zone to prevent moisture
re-entrainment
• Modular design allows for easy installation
of multiple housings and saves energy
• Annular seal and captive O–ring prevent leaks
• Aluminum housings (1⁄4” to 3 NPT) feature
electrophoretic coating to prevent corrosion
• Aluminum housings (1⁄4” to 3” NPT) carry
a 10-year housing guarantee
• Standard automatic condensate drain
SPECIFICATIONS & ENGINEERING DATA
Moisture Separators
Filter Pipe Size
Flow Rate
A
Model
NPT scfmNm3/hr
In.
WSNT
WSNT
WSNT
WSNT
WSNT
WSNT
WSNT
WSNT
WSNT
WSNT
20
30
63
127
176
318 427
675
1000
1500
⁄42035
⁄83050
1
⁄2 63112
3
⁄4 127216
1
176 300
11⁄4
318 540
1
1 ⁄2
427 725
2
675 1150
1
2 ⁄2 10001700
3
1500 2550
1
3
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
3 11⁄481⁄4
3 11⁄481⁄4
31⁄211⁄481⁄4
5 11⁄2
12
5
11⁄2
12
1
5
1 ⁄2
12
1
5 ⁄2
2
19
1
5 ⁄2
2
19
8
23⁄4
24
3
8
2 ⁄4
24
3
3
4
4
4
4
6
6
8
8
1.45
1.45
2.90
5.95
5.95
5.95
9.70
9.70
25.5
25.5
0.65
0.65
1.30
2.70
2.70
2.70
4.40
4.40
11.5
11.5
72
72
88
125
125
125
135
135
200
200
Metric
Dimensions
B
C
D
mm
mm
mm
35
35
32
39
39
39
50
50
68
68
210
210
210
300
300
300
480
480
590
590
75
75
100
100
100
100
150
150
200
200
Max.
Min. TypicalMax.
Specs Recommended
Recommended Pressure Loss
Working
Filter Operating Temp. Operating Temp. At Rated Flow
Pressure
Model
˚F
˚C
˚F
˚C
psi
mbar
psig
barg
WSNT 248
120
35
1.5
0.7
50
232
16
Correction Factor
Operating psig
4
9
Pressure
barg 0.3
0.6
Correction Factor 0.21 0.29
15
29
44
1
2
3
0.38 0.53 0.65
58
72
87
4
5
6
0.76 0.84 0.92
100 7
1
Operating psig 115 130
Pressure
barg
8
9
Correction Factor 1.07 1.13
145 160 174
10
11
12
1.19 1.25 1.31
189 203 218 232
13
14
15
16 1.36 1.41 1.46 1.51
For maximum flow rate, multiply model flow rate shown in the above table by the correction factor corresponding to the working pressure.
QuincyCompressor.com | Made in the U.S.A. | Performance You Demand. Reliability You Trust.
8
HIGH-PRESSURE
ALUMINUM FILTERS
HIGH-PRESSURE
STAINLESS STEEL FILTERS
Coalescer — Absorber
Coalescer — Absorber
Quincy’s aluminum alloy, 750 psig high pressure filter
lineup offers an economic alternative to the high cost of
stainless steel. There are two levels of coalescing and an
activated carbon absorber. Ideally suited for the PET
bottle blowing industry, the coalescers remove various
levels of liquid aerosols and the activated carbon absorber removes vapor and odors.
Quincy’s line of 316 grade Stainless Steel filters
for pressure requirements of 750 psig through
5000 psig feature:
• Three pressure ranges
(750 psig, 1,500 psig, 5,000 psig)
• Heavy-duty, Stainless Steel tie rod
design for 1500 psig and 5000 psig
• High-temperature capacity (250ûF.)
• Multiwrap element construction for
optimum performance and long life
• Synthetic lubricant and mineral oil
compatibility
• Large sump and quiet zone to prevent
750 psig/250°F 60 to 2000 scfm (1/2” to 2” NPT)
• SSCT standard coalescer
• SPCT polishing coalescer
• SACT activated carbon
re-entrainment
• Push-to-fit design for easy filter
element replacement
1500 psig/250°F
65 to 2050 scfm (1/2” to 2” NPT)
• Modular design allows for easy installation of
• ESCT standard coalescer
• EPCT polishing coalescer
multiple filters and saves energy
750 psig/250°F
150 to 3000 scfm (1/2” to 2” NPT)
• EACT activated carbon
5000 psig/250°F
• HSCT standard coalescer
28 to 775 scfm (1/2” to 11/2” NPT)
• HPCT polishing coalescer
• VSCT standard coalescer
• HACT activated carbon
• VPCT polishing coalescer
• VACT activated carbon
9
COMPRESSED AIR FILTERS
HIGH PRESSURE, 750 PSIG —­­­­SPECIFICATIONS & ENGINEERING DATA
Aluminum, 750 psig
Element Number
Filter Model Pipe Size
Flow Rate
Model
of
A
3
(Grade)
NPT scfmNm /hr
(Grade) Elements
In.
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
94
147
265
324
492
1015
1132
1882
/4
/8
1
/2
3
/4
1
11/2
2
2
1
3
94
147
265
324
492
1015
1132
1882
160
250
450
550
835
1725
1925
3200
H_
H_
H_
H_
H_
H_
H_
H_
_E
_E
_E
_E
_E
_E
_E
_E
94
147
265
324
492
1015
1132
1882
1
1
1
1
1
1
1
1
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
1
21/2
/2 6
1
21/2
/271/2
1
4 /211/2
12
41/211/2
12
1
1
4 /21 /2151/2
3
5 /4
2
21
53/4
2
21
3
5 /4
2
25
2
2
6
6
6
7
7
7
0.50.25 6315 15050
0.60.27 6315 19050
5.7
2.60
114
38
305
150
5.7
2.60
114
38
305
150
7.3
3.30
114
38
395
150
16.5
7.50
146
50
435
170
16.5
7.50
146
50
435
170
22.0
10.00
146
50
635
170
Max.
Pressure Loss
Specs
Particle
Oil Carryover
Max.
Change
Filter Removal
at 68°F at 20°C Temperature
Clean & Dry
Wet
Element
3
Element
in Microns ppm
mg/m °F
°C
psi
mbar
psi
mbar
psi
mbar
Max.
Working
Pressure
psig barg
High-pressure aluminum filter element grades, 750
HSCE
1
0.1
0.1
248 120
HPCE
0.01
0.01
0.01
248 120
HACE
0.01
0.003 0.003
77
25
750
750
750
psig
1.1
1.5
1.1
75
100
75
Stainless
Steel, 750 psig
Element Number
Grade
Grade
Grade
Grade
Grade
Grade
Grade
Grade
60
120
200
300
600
1000
1200
2000
/4
/8
1
/2
3
/4
1
11/2
2
2
1
3
60
120
200
300
600
1000
1200
2000
100
200
340
500
1000
1700
2040
3400
400
400
50
50
50
Models
HPAT 265–1882
Models
HPAT 94 & 147
Filter Model Pipe Size
Flow Rate
(Grade)
NPT scfmNm3/hr
2.2 150
6
4.4 300
6
see notes
Model
(Grade)
S_
S_
S_
S_
S_
S_
S_
S_
_E
_E
_E
_E
_E
_E
_E
_E
of
Elements
60
120
200
300
600
1000
1200
2000
1
1
1
1
1
1
1
1
3
31/2
/4
3
31/2
/4
3
31/2
/4
41/211/4
41/211/4
6
13/4
6
13/4
6
13/4
7
8
10
11
17
21
21
33
3
4
4
6
12
12
12
20
High-pressure stainless steel filter element grades, 750 psig
SSCE
1
0.1
0.1
248 120 1.1
75
SPCE
0.01
0.01
0.01
248 120 1.5 100
SACE
0.01
0.003 0.003
77
25 1.1
75
750
750
750
2.2 150
10
4.4 300
10
see notes
Metric
Dimensions
B
C
D
mm
mm
mm
3.801.70 85 18
4.40
2.00
85
18
4.90
2.20
85
18
8.80
4.00
110
27
11.0
5.00
110
27
33.0
15.0
150
45
33.0
15.0
150
45
46.0
21.0
150
45
Max.
Working
Pressure
psig barg
Correction Factor for Aluminum
Black
Black
Black
Models
HPST 60–2000
Max.
Pressure Loss
Specs
Particle
Oil Carryover
Max.
Change
Filter Removal
at 68°F at 20°C Temperature
Clean & Dry
Wet
Element
3
Element
in Microns ppm
mg/m °F
°C
psi
mbar
psi
mbar
psi
mbar
Operating psig 145 290
Pressure
barg 10
20
Correction Factor 0.34 0.57
Element
End Cap
Color
Code
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
A
In.
Metric
Dimensions
B
C
D
mm
mm
mm
700
700
50
50
50
170 75
205
100
255
100
270
150
420
300
525
300
525
300
825
500
Element
End Cap
Color
Code
Black
Black
Black
Correction Factor for Stainless Steel
435 580
30
40
0.71 0.86
725
50
1.0
Operating psig 58
87
Pressure
barg
4
6
Correction Factor 0.14 0.22
116 145 220
8
10
15
0.28 0.34 0.47
290 435 580
20
30
40
0.56 0.70 0.85
725
50
1.0
For maximum flow rate, multiply model flow rate shown in the above table by the correction factor corresponding to the working pressure.
QuincyCompressor.com | Made in the U.S.A. | Performance You Demand. Reliability You Trust.
10
HIGH PRESSURE 1500 & 5000 PSIG —­­­­SPECIFICATIONS & ENGINEERING DATA
Stainless Steel, 1500 psig
Number
Filter Model Pipe Size
Flow Rate Element Model of
A
3
(Grade)
NPT scfmNm /hr
(Grade) Elements
In.
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
High-pressure stainless steel filter element grades, 1500
1
Grade 65
/4
65
110
E_ _E 65
1
3
Grade 185
/8
185 315
E_ _E 185
1
1
Grade 270
/2
270 460
E_ _E 270
1
3
Grade 400
/4
400 680
E_ _E 400
1
Grade 700
1
700 1200
E_ _E 700
1
1
Grade 1050 1 /2 1050 1785
E_ _E 1050 1
Grade 2050 2
2050 3485
E_ _E 2050 1
/4
/4
/4
1
1
13/4
13/4
psig
23/4
23/4
31/2
51/8
51/8
6
6
3
3
3
6
10
11
11
19
21
33
3
7
10
6
12
12
20
Max.
Pressure Loss
Specs
Particle
Oil Carryover
Max.
Change
Filter Removal
at 68°F at 20°C Temperature
Clean & Dry
Wet
Element
Element
in Microns ppm
mg/m3
°F
°C
psi
mbar
psi
mbar
psi
mbar
High-pressure stainless steel filter element grades, 1500 psig
ESCE
1
0.1
0.1
248 120 1.1
75
EPCE
0.01
0.01
0.01
248 120 1.5 100
EACE
0.01
0.003 0.003
77
25 1.1
75
2.2 150
6
4.4 300
6
see notes
400
400
7.103.20 65 20
12.3
5.60
65
20
13.56.10 88 20
23.210.5 13226
32.4
14.7
132
26
48.5
22.0
150
45
61.7
28.0
150
45
Max.
Working
Pressure
psig barg
Element
End Cap
Color
Code
1500 100
1500 100
1500 100
Black
Black
Black
Stainless Steel, 5000 psig
Number
Filter Model Pipe Size
Flow Rate Element Model of
A
3
(Grade)
NPT scfmNm /hr
(Grade) Elements
In.
Dimensions
B
C
D
Weight
A
In.
In.
In.
lb. kg.
mm
High-pressure stainless steel filter element grades, 5000
1
Grade 28
/4
28
48
V_ _E 28
1
3
Grade 67
/8
67
111
V_ _E 67
1
1
Grade 150
/2
150 255
V_ _E 150
1
3
Grade 310
/4
310 520
V_ _E 310
1
Grade 445
1
445 750
V_ _E 445
1
1
Grade 775
1 /2
775 1330
V_ _E 775
1
/2
/4
/4
1
11/2
11/2
psig
13/4
2 3/4
31/2
31/2
6
6
1
3
3
2.2 150
10
4.4 300
10
see notes
700
700
Max.
Working
Pressure
psig barg
Element
End Cap
Color
Code
5000 350
5000 350
5000 350
Black
Black
Black
135 70
250
180
275250
265150
480
300
525
300
825
500
Metric
Dimensions
B
C
D
mm
mm
mm
4
3
3.50
1.60
41
10
6 3 7.103.20 65 20
9 6 12.35.60 88 20
11 10 13.56.10 88 25
13
8
32.0
14.5
150
35
19
12
38.4
17.4
150
35
Max.
Pressure Loss
Specs
Particle
Oil Carryover
Max.
Change
Filter Removal
at 68°F at 20°C Temperature
Clean & Dry
Wet
Element
Element
in Microns ppm
mg/m3
°F
°C
psi
mbar
psi
mbar
psi
mbar
High-pressure stainless steel filter element grades, 5000 psig
VSCE
1
0.1
0.1
248 120 1.1
75
VPCE
0.01
0.01
0.01
248 120 1.5 100
VACE
0.01
0.003 0.003
77
25 1.1
75
Metric
Dimensions
B
C
D
mm
mm
mm
103
60
135 70
210150
280250
330
200
180
300
Models
HPST 65–775
Correction Factor for Stainless Steel, 1500 psig
Operating psig 290 435
Pressure
barg 20
30
Correction Factor 0.45 0.57
580 725 870 1015 1160 1300 1500
40
50
60
70
80
90
100
0.68 0.80 0.84 0.88 0.92 0.96 1.0
Correction Factor for Stainless Steel, 5000 psig
Operating psig 725 1450 2175 2900 3625 4350 5000
Pressure
barg 50
100 150 200 250 300 350
Correction Factor 0.73 0.78 0.82 0.87 0.91 0.96 1.0
For maximum flow rate, multiply model flow rate shown in the above
table by the correction factor corresponding to the working pressure.
11
COMPRESSED AIR FILTERS
MIST ELIMINATOR - HIGH EFFICIENCY
HEAVY-DUTY COALESCING FILTER
LONG LIFE AND LOW PRESSURE DROP
The Quincy Mist Eliminator is a heavy-duty
coalescing type filter engineered to efficiently
remove oil, particulate, and water from compressed air. By using a combination of impaction, interception and Brownian Movement, the
Quincy Mist Eliminator achieves 100% efficiency in removing particles 3 micron and larger,
•
99.98% of 0.1 micron and larger and 99.5% of
0.01 micron and larger. Typical pressure drop
is less than 1 psig. Average element life in continuous service is 10 years.
A 10-year element life can be achieved in relatively clean environments.
Lower pressure drop compared to conventional coalescing and particulate filters
(average 1 psig versus 6 psig). Higher
pressure drops require the compressor to
operate at an elevated pressure, therefore
requiring more power. Every 2 psig reduction in pressure saves approximately 1%
air compressor power based on 100 psig
operating pressure. Quincy Mist Eliminator
could easily save in excess of $3,000 per
year in air compressor electrical energy
(based on 8,000 hours per year operation,
$0.07 per Kw hour, 100 hp compressor and
a 93% motor efficiency).
• Large tank volume captures and retains
inadvertent lubricant discharge caused by
compressor separation system malfunction,
which protects downstream equipment.
• Average element life of 10 years versus 6
months for conventional coalescing and
particulate filter elements reduces maintenance and waste disposal.
Calibrated Differential
Pressure Gauge is
standard equipment
QuincyCompressor.com | Made in the U.S.A. | Performance You Demand. Reliability You Trust.
12
ME — SPECIFICATIONS & ENGINEERING DATA
Mist Eliminator
Dimensions scfm @ Max Diameter Height
Model
100 psig psig
In.
In.
ME
ME
ME
ME
ME
ME
ME
ME
ME
ME
ME
ME
ME
ME
ME
ME
250S
500S
800S
1100S
1500TP
1900TP
2500TP
3500TP
4500TP
5000TP
6000TP
7000TP
8000TP
9000TP
10000TP
15000TP
250
500
800
1100
1500
1900
2500
3500
4500
5000
6000
7000
8000
9000
10000
15000
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
14
14
14
16
18
18
18
24
24
24
24
30
30
30
36
42
Min. Filter In/Out Removal
Flanged
Drain
Clearance* Approx ConnectionsConnections
In.
Wt. lb.
In.
In.
451/8
22
471
11/2
1 NPT
581/8
35
518
2
1 NPT
731/45058621/2
1 NPT
781/2551/8
664
3
1 NPT
69 7/8
45 3/8
805
4
1 NPT
747/850 3/8
965
4
1 NPT
867/862 3/8
860
5
1 NPT
8611/1659 7/8
1400
5
1 NPT
99 3/472 7/8
1517
6
1 NPT
1053/478 7/8
1564
6
1 NPT
120 7/893 7/8
1726
8
1 NPT
108 3/880 1/8
2450
8
11/2 NPT
116 3/888 1/82520 8 11/2 NPT
124 3/896 1/82603 8 11/2 NPT
118 3/1688 5/8
3640
10
11/2 NPT
132 11/16100 7/8CF 1011/2 NPT
Notes: Larger Sizes Available Consult Factory.
* Does Not Include Rigging.
A Pneumatic
No-Loss Demand
Drain is optional
equipment
UNIQUE DOUBLE ELEMENT DESIGN
1,500 cfm through 15,000 cfm models utilize
a space-saving double element design (see
Figure 2). Using a double nesting technique, the Quincy Mist Eliminator offers high
efficiency separation in a low profile package.
By nesting an element inside an element, total
surface area is greater than conventional single
element designs. Due to reduced overall height,
the Quincy Mist Eliminator can be installed in
locations where conventional single element
designs cannot. For example, a 10,000 cfm
Quincy Mist Eliminator low profile design
is only 118 inches tall. Compare this to other
single element designs that are 210 inches tall.
That’s a reduction of over 7 feet in overall
height! Imagine the savings in time and convenience when you change the element or
service the unit.
All Quincy Mist Eliminator tanks are ASME
coded and stamped. Standard equipment
includes a calibrated differential pressure
gauge and enamel paint. No Loss Demand
Drains are optional. Pressure relief valves are
not included but may be required by local
codes.
Air in
Air out
Drain
Figure 1
Figure 2
13
COMPRESSED AIR FILTERS
QUINCY COMPRESSOR AIR QUALITY PERFORMANCE GUARANTEE
•
Quincy Compressor offers a performance guarantee on its Air Treatment Filtration
line. Quincy’s Filters are guaranteed to perform to the currently published specifications as found in filtration documentation available at www.quincycompressor.com/
literature_library.html.
• Under normal operating conditions, and when installed in an original installation, the
Quincy CPNT, CSNT and DCNT filter elements meet or exceed air quality standards
of ISO 8573. The Quincy filters are guaranteed to operate for 6,000 hours or 12
months, whichever shall occur first, before reaching the recommended 6 PSIG pressure differential for filter replacement.
• Quincy Compressor guarantees that the aforementioned filters will perform as stated
above, or Quincy Compressor will either repair or replace the filter or element, at
Quincy’s discretion. Quincy Compressor will not be responsible for removal, reinstallation and/or related costs.
The Air Quality Performance Guarantee is in accordance and established based upon Air Quality-ISO 8573 standard for
oil-free and contaminant-free compressed air applications. The Air Quality Performance Guarantee remains in effect for
the below listed site so far as all installation and maintenance requirements set forth and in accordance with the warranty
and policies and procedures handbok, under Section 1 General Information; Warranty Coverage Rules, are maintained.
QuincyCompressor.com | Made in the U.S.A. | Performance You Demand. Reliability You Trust.
14
THE QUINCY PROMISE
Quincy Compressor and its partnering distributors promise
to provide you with uncompromising reliability in all Quincy
equipment. This makes your compressed air system one less
thing that you need to worry about, allowing you to focus on
your company’s productivity and profitability.
THE QUINCY SOLUTION
Operating at peak efficiency and providing quality product is a priority for many of our customers. Quincy
Compressor in partnership with our global network of authorized distributors strives to be your provider for all of
your compressed air system needs. From the air compressor to filtration to dryers and storage solutions, Quincy
Compressor is your single source provider for all of your compressed air system needs.
Air Compressors
Quincy Compressor is a premier provider of many different types of air compressors designed for a variety of applications using different compression technologies.
The Quincy QT is a Reciprocating Splash Lubricated compressor for tough everyday use. The Quincy QP is a
reciprocating fully pressure lubricated compressor for a competitive advantage. The Quincy QR is a reciprocating
compressor designed for the most demanding conditions. The Quincy QGS 5-30 HP is a heavy-duty belt driven
rotary compressor at a competitive price. The Quincy QSI provides an industrial grade premium fixed speed rotary
screw air compressor. The Quincy QGV provides a premium variable speed rotary screw air compressor designed
to optimize your energy efficiency.
Compressed Air Treatment
Quincy Compressor is your single-source provider of compressed air treatment products to complement your air
compressor. Quincy provides refrigerated air dryers, desiccant air dryers, compressed air filtration from 5 to .01
micron, condensate drains, condensate management systems, storage solutions, and flow control valves. Quincy
Compressor is truly a single-source provider for all of your compressed air needs.
Genuine Parts
Genuine Parts from Quincy Compressor keep your equipment running like new. When servicing your Quincy compressor, insist on Genuine Quincy parts. Not only will you save time and money, but you will gain the peace-of-mind
from using only the highest quality parts worthy of the Quincy name.
System Controls
Whether you have one air compressor or many air compressors from many different manufacturers, Quincy
Compressor provides you with a way to control and monitor all of the components in your compressed air system
in a way that maximizes your energy efficiency and decreases your energy costs. Whether you need to control your
system on site or from half way around the world, Quincy Compressor is your source for reliable, efficient controls.
15
COMPRESSED AIR SYSTEMS BEST PRACTICE
an EnPro Industries company
Air Quality Classification
an EnPro Industries company
ISO 8573.1
QSI-500i
Quincy Rotary Screw
Moisture
Solids
Micron ISO PDP ISO
ECODRI
quincycompressor.com
WSN
Wet
Bulk Receiver
Liquid 1gal/CFM
DP1 and/or
Mist
Eliminator
DP2
CSN
1 Micron
0.1 PPM
DP3
Refrigerated Air Dryer
CPN
QPNC Non-Cycling 0.01 Micron
QED Cycling
0.01 PPM
DP4
DP5
Dry
Receiver
5gal/CFM
Oil
PPM ISO
0.01
1
+38˚F
4
0.01
1
0.01
1
+38˚F
4
0.003
1
ACN
0.003 PPM
Vapor &
Odors
0.01 1 -100˚F 1
0.001 1
NOTE: Requires CXN (.001 PPM) filter in
series with standard CPN prefilter.
1
2
-40˚F
2
0.01
1
0.01
1
-40˚F
2
0.003
1
1
2
-40˚F
2
0.01
1
0.01
1
-40˚F
2
0.003
1
1
2
+50˚F
6
0.01
2
0.01
1
+50˚F
6
0.003
1
quincycompressor.com
Quincy Reciprocating
AC
WSN Moisture Separator
DCN Particulate/Coarse Coalescer
CSN STD 0.1 PPM Coalescer, 1 Micron
CPN
CXN
ACN
HTD
WSN
Bulk
Liquid
DP6
CPN Desiccant Heatless Air Dryer CSN
Dry
1 Micron Receiver
0.01 Micron
QDTS—Small
Particulate 5gal/CFM
0.01 PPM
QHD—Industrial
DP7
-40˚F PDP
Polishing 0.01 PPM Coalescer
Xtra 0.001 PPM Coalescer
Activated Carbon Absorber
High Temperature, 1 Micron
A
QPNC Non-Cycling Refrigerated Dryer
QED Cycling Refrigerated Dryer
QMOD Modular Heatless Dryer
QDTS
QHD
QHP
QBP
QRHT
AC
DP
Small Heatless Dryer
Industrial Heatless Dryer
Heated Purge Dryer
Blower Purge Dryer
High Temp. Refrigerated Dryer
After Cooler
Drain Point
ACN
0.003 PPM
Vapor &
Odors
B
CPN
Dry
Desiccant Heated Air Dryer CSN (NPT)
HTD (FLG) Receiver
0.01 Micron
QHP—Heated Purge
1 Micron 5gal/CFM
0.01 PPM
QBP—Blower Purge
Particulate
DP8
-40˚F PDP
ACN
0.003 PPM
Vapor &
Odors
Quincy
Condensate
Purifier
QRHT-75
quincycompressor.com
DCN
5 Micron
5 PPM
DP9
High Temperature/
Refrigerated Air Dryer
QRHT—High Temp.
DP10
CSN
1 Micron
0.1 PPM
DP11
Approximate Liquid Removal
100 CFM, 100 psi, 80˚F, 4000 hrs./yr., 2 PPM
ACN
0.003 PPM
Vapor &
Odors
Drain Gallons Drain Gallons Drain Gallons
Point per Year Point per Year Point per Year
3000
140
1
5
9
300
2000
3000
2
6
10
4320
305
310
3
7
11
120
4
1300
8
310
©2013 Quincy Compressor. All rights reserved. Printed in U.S.A. (QATF-007 09/13)
701 North Dobson Avenue | Bay Minette, AL 36507 | Phone 251.937.5900 | Fax 251.937.7182 | Email: info@quincycompressor.com