Product Catalog - Dry Ice Blasting with Cold Jet

Transcription

delivering
advanced
Dry Ice
solutions
1
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Dry Ice
solutions
This catalog contains all of Cold Jet LLC’s product offerings. All
part numbers are included in this catalog. Cold Jet will always ship
the latest version of each part. Invoices will always reflect the latest
revision level numbers.
Contact us:
+1-513-831-3211
+1-800-337-9423
Customer Support*
+1-800-777-9101 Cincinnati, OH
+1-800-445-6131 Rancho Cucamonga, CA
+32 (0) 2 467 41 01 Europe
Dry Ice
1-800-736-3423 East Coast (M-F 8:30-5:00 p.m.)
1-800-437-9423 West Coast (M-F 8:30-5:00 p.m.)
www.coldjet.com
info@coldjet.com
* Customer Support is available 24 hours a day, 7 days a week.
3
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Table of Contents
Dry Ice
solutions
PRODUCTS
Dry Ice Blasting Equipment & Accessories
Blasting Systems ....................................................................................................................................................... 7
Applicators
Cold Jet .................................................................................................................................................................. 9
Alpheus................................................................................................................................................................10
Nozzles/Barrels
Cold Jet Low-Flow............................................................................................................................................11
Cold Jet Medium-Flow...................................................................................................................................14
Cold Jet Specialty High-Flow ......................................................................................................................18
Alpheus D-Series..............................................................................................................................................20
Alpheus N-Series..............................................................................................................................................22
Alpheus A-Series ..............................................................................................................................................24
Alpheus S-Series...............................................................................................................................................25
Alpheus T-2 Series ...........................................................................................................................................27
Nozzle Accessories
Cold Jet ................................................................................................................................................................28
Alpheus................................................................................................................................................................32
Hoses & Hose Fittings
Cold Jet ................................................................................................................................................................33
Alpheus................................................................................................................................................................35
Accessories
Cold Jet ................................................................................................................................................................37
Alpheus................................................................................................................................................................38
Pelletizers
P325, P750, P1500 & P3000 .............................................................................................................................39
Accessories ...............................................................................................................................................................40
Block Maker ..........................................................................................................................................................................41
Engineered Systems
Integrated Systems & Automated Cleaning Booth ...................................................................................42
FlashJet® System .....................................................................................................................................................43
Safety
Accessories ...............................................................................................................................................................44
SERVICES
Customer Support ...............................................................................................................................................................45
Dry Ice Services ...................................................................................................................................................................46
Cold Jet Solutions ................................................................................................................................................................47
Warranty Information .....................................................................................................................................................48
Terms & Conditions ...........................................................................................................................................................49
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
5
Dry Ice Blasting Systems
delivering
advanced
Dry Ice
solutions
All blasting systems include one blast unit, one length each of air and blast hose, a customer specified
applicator (unless otherwise noted) and nozzle (from appropriate group), and appropriate handle
for nozzle (if applicable).
Alpheus PT-110
•
•
•
•
•
All pneumatic, dual-hose blast system
Hopper - 110 lbs (50 kg) capacity
Low-pressure system - 25 to 125 psi (1.72 to 8.62 bar)
Variable feed rate - 1 to 4 lbs/min (0.5 to 1.8 kg/min)
Choice of A or D-series Applicator & Nozzle
•
•
•
Weight: 118 lbs (53.5 kg)
Size (LxWxH): 18"x 14"x 42"
(86.4cm x 50.8cm x 96.5cm)
Media - Dry Ice Pellets (3mm)
Cold Jet AeRO 30
•
•
•
•
•
•
•
Electric, single-hose blast system
Fully isolated hopper - 30 lbs (13.6 kg) capacity
Fixed feed rate - 1.5 lbs/min (0.7 kg/min)
Standard applicator: Single-Speed Applicator
Choice of nozzle from Group A
Hose & Nozzle management devices
•
•
•
Weight: 165 lbs (75 kg)
(63.5cm x 43.2cm x 76.2cm)
Options
• Externally mounted blast pressure regulator
• Externally mounted coalescing air filter
• 3 lbs/min (1.36 kg/min) rotor
Alpheus T-2
•
•
•
•
•
•
Hopper capacity - 12 lbs ( 5.4 kg) capacity
• Weight: 103 lbs (46.7 kg)
• Size (LxWxH): 22"x 14"x 20"
Variable feed rate - 0.5 to 1.5 lbs/min (0.2 to 0.7 kg/min)
(56cm x 36cm x 51cm)
Ice Wand Applicator
•
Media - Dry Ice Block (5"x 5"x 10")
3
Choice of 12, 25 or 50 cfm (0.34, 0.71, or 1.42 m /min)
(12.7cm x 12.7cm x 25.4cm)
Pencil Point Nozzle in 6" or 9" (15 or 22 cm) length
3
(Standard 9" / 25 cfm (22 cm / 1.42 m /min will be provided unless otherwise specified)
Options
• Durable transport cart with air filter (shown)
Alpheus Power PTX
•
•
•
•
•
•
All pneumatic, single-hose blast system
Hopper - 110 lb. (50 kg) capacity
Integral filter for blast air
Choice of S-Series Applicator & Nozzle
•
•
•
Size (LxWxH): 18.5"x 14"x 45.8"
(43cm x 36cm x 116cm)
7
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Dry Ice Blast Systems
delivering
advanced
Dry Ice
solutions
All blasting systems include one blast unit, one length each of air and blast hose, a customer specified
applicator (unless otherwise noted) and nozzle (from appropriate group), and appropriate handle
for nozzle (if applicable).
Cold Jet AeRO 75
•
•
•
•
•
•
•
•
Fully isolated hopper - 75 lbs (34 kg) capacity
Low pressure system - 30 to 140 psi (2.1 to 9.7 bar)
Variable feed rate - 0 to 7 lbs/min (0 to 3.2 kg/min)
Hose & Nozzle management devices
Hour meter
Standard applicator: Single-Speed Applicator
Choice of nozzle from Group A or B
•
•
•
Weight: 295 lbs (134 kg)
(86.4cm x 50.8cm x 101.6cm)
Options
• Internally mounted blast pressure regulator
Cold Jet AeRO 75-DX
•
•
•
•
•
•
•
•
•
Fully isolated hopper - 75 lbs (34 kg) capacity
Latch-turn slideout hopper
Full-pressure system - 30 to 300 psi (2.1 to 20.7 bar)
Variable feed rate - 0 to 7 lbs/min (0 to 3.2 kg/min)
Hose management system
Hour meter
Standard applicator: Tri-Mode Speed Applicator
Choice of nozzle from Group A, B, or C
•
•
•
(86.4cm x 50.8cm x 96.5cm)
Options
• Internally mounted air pressure regulator
Alpheus SDI-5
•
•
•
•
•
•
•
All pnematic, dual-hose blast system
Hopper - 120 lbs (54.4 kg) capacity
High-pressure system - 25 to 250 psi (1.72 to 17.2 bar)
Hose management system
Integral filter for blast air
Choice of A, D, or N-series Applicator & Nozzle
8
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
•
•
•
Size (LxWxH): 37"x 24.5"x 45"
(94cm x 62.2cm x 114.3cm)
Media - Dry Ice Pellets, Nuggets, and
Block (10"x 10"x 24")
(25.4cmx 25.4cmx 61cm)
delivering
advanced
Applicators
Dry Ice
solutions
Cold Jet
Single-Speed - Part #: 2E0362-G1
•
•
•
•
•
•
•
Lightweight
Single-finger trigger allows easy control of blasting power
Safety switch
Designed for right and left handed users
Includes a JIC fitting mounted to a rotary union for superior ergonomics
Integrated Quick Change feature so that nozzles can be changed safely and easily
Standard Applicator for AeRO 30 and AeRO 75
Tri-Mode Speed - Part #: 2E0362-G2
•
•
•
•
•
•
•
•
Lightweight
Single-finger trigger allows easy control of blasting power
Three position feed switch (Up - 75% feed, Center - machine controlled, Down - purge/air only)
Safety switch
Includes a JIC fitting mounted to a rotary union for superior ergonomics
Integrated Quick Change feature so that nozzles can be changed safely and easily
Standard Applicator for AeRO 75-DX
90-Degree In-Line - Part #: 2E0350
•
•
•
•
•
•
Lightweight
Ergonomic trigger
Safety switch
Works with all Micro Series (MS) nozzles and requires adaptor to work with all other nozzles
Ideal for blasting into confined spaces
Simple & easy design for better control of blasting power
Foot Switch - Part #: 2G1070
•
•
•
Eliminates the need for a hand-held control switch
Allows the nozzle to be attached directly to the blast hose for better ergonomics
"Deadman style" safety foot pedal
Hand Switch - Part #: 2E0258
•
•
•
Eliminates the need for a hand-held applicator
Can be attached to the blast hose, an extension tube or can be hand held
"Deadman style" safety switch
Remote Switch - Part #: 2G1137
•
•
Remote start/stop station for fixed applications
Connects directly to blast control cable
9
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Applicators
Dry Ice
solutions
Alpheus
D-Series - Part #: 13204-M25
•
•
•
•
Lightweight
Ergonomic design allows users to blast comfortably for long periods of time at blast pressures
up to 125 psi (8.62 bar)
Applicator can be used with dry ice pellets as well as the sugar-size granules produced from
shaved block ice
Sold only as part of hose assembly (Part #: 13208-M25)
S-Series - Part #: 13400-001
•
•
•
•
For use with the Alpheus single-hose Power PTX
Multi-finger trigger allows easy control of blasting power
Nozzles can be changed easily and safely
Applicator can use dry ice pellets as well as the sugar-size granules produced from shaved block
ice
A-Series - Part #: 13274-E25
•
•
•
•
•
Lightweight
Teflon head glides easily over sensitive surfaces to prevent damage
Designed to clean hard-to-reach areas with clearance as small as 8" (20.3 cm)
Reverse-thrust capability directs an air stream through the back of the gun, providing superior
balance and improved manoeuverability, even in one-hand operation
shaved block ice
•
N-Series - Part #: 12400-001
•
•
•
Recommended for use on applications requiring pressures of 125 to 300 psi (8 to 20.68 bar)
Nozzles can be changed easily and safely
shaved block ice
Ice Wand - Part #: 13208-M25
10
•
•
•
•
•
•
•
For use with T-2
Lightweight
Safety switch
Integrated Quick Change feature so that nozzles can be changed easily and safely
Sold only as part of hose assembly (Part #: 14325-002)
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Low-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group A
MS-045 - Part #: 2E0324-1
•
•
•
•
•
•
Full pressure
o
45 angle x 7.7" (19.6 cm) axial length. Minimum cavity opening of 3.5" (8.9 cm)
At 80 psi (5.5 bar) requires 100 SCFM (2.8 m3/min)
Blast swath is 0.75" (1.9 cm) perpendicular to nozzle tube line
Stainless steel nozzle with aluminum coupler and plastic coated
Suggested for use with 3/4" (1.9 cm) OD Tube Style Handle - Part #: 2E0275
May be used with or without an extension for mold cleaning and other applications requiring
this angle and swath orientation.
MS-046 - Part #: 2E0325-1
•
•
•
•
•
•
Full pressure
o
Blast swath is 0.75" (1.9 cm) in line with nozzle tube
MS-047 - Part #: 2E0326-1
•
•
•
•
•
•
Full pressure
90o angle x 7" (17.8 cm) axial length. Minimum cavity opening of 5.3" (13.5 cm)
Blast swath is 0.75" (1.9 cm) perpendicular to nozzle tube line
MS-050 - Part #: 2E0328-1
•
•
•
•
•
•
Full pressure
o
135 angle x 7.3" (18.6 cm) axial length. Minimum cavity opening of 6.3" (16 cm)
Blast swath is 0.75" (1.9 cm) in line with nozzle tube
11
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Low-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group A
MS-071 - Part #: 2E0329-1
•
•
•
•
•
•
Full pressure
o
90 angle x 7.3" (18.6 cm) axial length. Minimum cavity opening of 7" (17.8 cm)
Blast swath is 1" (2.5 cm) in line with nozzle tube
MS-136 - Part #: 2E0327-1
•
•
•
•
•
•
Full pressure
o
Blast swath is 1" (2.5 cm) perpendicular to nozzle tube line
This nozzle works effectively in the smallest openings.
The 16" length is usually sufficient for most cleaning jobs but may be extended.
Applications: Cleaning molds, especially PET molds.
MS-171 - Part #: 2E0349
•
•
•
•
•
•
Full pressure
o
45 angle x 7.3" (18.5 cm) axial length. Minimum cavity opening of 5" (12.7 cm)
Blast swath is 1" (2.5 cm) perpendicular to nozzle tube line
This angled nozzle is one of a series that provides a customized angle and swath width to optimize
the blasting of critical surfaces, a short length for excellent articulation that can be readily
extended if desired.
TN-312 - Part #: 2E0314
•
•
•
•
•
12
Low Pressure
Blast swath is 0.5" (1.3 cm)
Straight, 14" (35.6 cm) long
Will not harm delicate tubing
Ideal for cleaning deep-cavity injection molds. The longer length allows more flexibility for plants with
different size slug molds and the small diameter allows the blast stream to escape the cavity being
cleaned.
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Low-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group A
510 SLF - Part #: 2E0341
•
•
•
•
•
•
Low pressure
Aluminum
Suggested for use with 1" (2.5 cm) OD Tube Style Handle - Part #: 2E0209
This nozzle provides a great combination of powerful cleaning and articulation with an exceptionally
low air consumption - 50 SCFM (1.4 m3/min) thereby maximizing your cleaning without
jeopardizing other compressed air operations.
523 SLF - Part #: 5E0179
•
•
•
•
•
•
Full pressure
Aluminum
This nozzle provides powerful cleaning with an exceptionally low air consumption - 50 SCFM
(1.4 m3/min) thereby maximizing your cleaning without jeopardizing other compressed air operations.
TN-183 - Part #: 5E0183
•
•
•
•
•
•
•
Full pressure
High-strength, low-temperature aluminum with a hard-coated aluminum base
Alpha adapter required for this nozzle (P/N #: 3E0729)
Suggested for use with 1 3/16" (3 cm) OD Tube Style Handle - Part #: 2E0289
The 1" (2.5 cm) FJIC end fitting on this nozzle allows for its use as a direct-to-hose nozzle or for it to be
attached to extensions or a 90-degree in-line applicator. This nozzle is ideal for cleaning deep-cavity
injection molds.
"J" Hook - Part #: 2E0361-1
•
•
•
•
•
•
o
160 angle blast flow turn
At 80 psi (5.5 bar) requires 70 scfm (1.96 m3/min)
Plastic coated stainless steel nozzle
See through safety blast shield
This nozzle is designed for PET mold cleaning and similar applications.
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
13
Medium-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group B
205 BL - Part #: 2E0321
•
•
•
•
•
•
•
Low pressure
80o angle x 8.3" (21 cm) axial length
Minimum cavity opening of 12.3" (31.2 cm)
Aluminum with stainless steel tubing
Shown with 1" (2.5 cm) OD Tube Style Handle - Part #: 2E0209
Moderate aggression low pressure nozzle designed to turn the flow 80 degrees for horizontal
surfaces.
Applications: Wafer plate cleaning, rubber mold cleaning, degreasing and general maintenance.
218 SL - Part #: 50E103
•
•
•
•
•
•
Low Pressure
At 80 psi (5.5 bar) requires 165 SCFM (4.7m3/min)
Blast swath is 3" (7.6 cm)
Aluminum
Recommended for use with Clamp Style Handle - Part #: 2E0287
The wide swath of this nozzle makes it ideal for a mild cleaning of large surface areas and provides
a consistent level of cleanliness without "streaks" over the entire surface.
Applications: Removing wax mold release from foam molds, and ideal for routine general maintenance
cleaning.
223 SL - Part #: 5E0190
•
•
•
•
•
•
Low Pressure
At 80 psi (5.5 bar) requires 165 SCFM (4.7m3/min)
Aluminum
Recommended for use with Clamp Style Handle - Part #: 2E0287
This high performance nozzle is designed to gives an aggressive, continuous non-pulsing and
smooth 3" (7.6 cm) blast path.
14
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Medium-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group B
307 BL - Part #: 2E0322
•
•
•
•
•
•
•
Low pressure
45o angle x 8.9" (22.6 cm) axial length
Minimum cavity opening of 4" (10.16 cm)
Aluminum
Shown with Threaded Style Handle - Part #: 2E0245
Low pressure nozzle designed to turn the flow 45 degrees for mild cleaning in tight spaces.
The nozzle's small exit tip makes it ideal for tight-access cavities.
Applications: Cleaning rubber molds and general removal of mold release agents.
402 SL - Part #: 5E0160
•
•
•
•
•
Low pressure
Aluminum
This nozzle's small size makes it ideal for tight-access cavities.
403 SL - Part #: 2E0331
•
•
•
•
•
Low pressure
Aluminum
This nozzle's small size makes it ideal for tight-access cavities.
15
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Medium-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group B
412 SL - Part #: 5E0156
•
•
•
•
•
•
Low pressure
Aluminum
This nozzle delivers maximum performance for low-flow and low-pressure air systems. It is ideal for
removing release agents from permanent aluminum molds and any application requiring an aggressive
blast.
413 SL - Part #: 5E0159
•
•
•
•
•
•
Low pressure
Aluminum
The wide swath on this nozzle makes it ideal for removing wax release agents from
polyurethane foam molds.
Applications: Cleaning rubber molds, general removal of mold release agents, as well as general
maintenance.
508 SL - Part #: 2E0323
•
•
•
•
•
•
Low pressure
Aluminum
This nozzle is an excellent combination of power and manoeuverability.
Applications: Cleaning rubber and urethane molds, and general removal of mold release agents.
16
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Medium-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group B
523 SF - Part #: 5E0175
•
•
•
•
•
•
Full pressure
Aluminum
This nozzle has the best track record for effectiveness and aggression at most pressure levels.
Applications: Cleaning tire molds (side wall, treads, and micro-vents), urethane molds, general
removal of mold release agents, and high-aggression general maintenance.
523 SF.2 - Part #: 5E0176
•
•
•
•
•
•
Full pressure
Aluminum
Applications: Cleaning tire molds (side wall, treads, and micro-vents), urethane molds, general
removal of mold release agents, and general maintenance.
807 SL - Part #: 5E0141
•
•
•
•
•
Low pressure
Aluminum
The wide cleaning swath makes this nozzle ideal for general degreasing and industrial clean-ups.
TN-302 - Part #: 2E0302-Length
•
•
•
•
•
Full pressure
Length: Customer Specified - up to 10" (25.4 cm)
Will not harm delicate tubing
Ideal for cleaning deep-cavity injection molds.
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
17
Specialty High-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group C
523 Stealth - Part #: 5E0167
•
•
•
•
•
•
Full pressure
Lightweight composite
Polymer construction will not damage surfaces in case of accidental contact with nozzle.
Applications: Cleaning tire molds (side wall, treads, and micro-vents), urethane molds, aluminum core boxes,
and general removal of mold release agents.
533 SF - Part #: 5E0161
•
•
•
•
•
•
Full pressure
Aluminum
Ideal nozzle for contract cleaning jobs due to its high aggression.
Applications: Cleaning tire molds, urethane molds, general removal of mold release agents, and any
general maintenance.
533 SF.2 - Part #: 5E0164
•
•
•
•
•
•
Full pressure
Aluminum
Suggested foruse with 1 3/16" (3 cm) OD Tube Style Handle - Part #: 2E0289
High-performance nozzle ideal for contract cleaning jobs due to its high aggression.
Applications: Cleaning tire molds, urethane molds, and general removal of mold release agents.
18
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Specialty High-Flow Nozzles
delivering
advanced
Dry Ice
solutions
Cold Jet
Group C
902 BL - Part #: 2E0249
•
•
•
•
•
•
•
•
•
Low pressure
90o angle with "air jet" opposite "blast jet" to balance nozzle thrust.
Minimum cavity opening of 5" (12.7 cm)
Aluminum with Teflon bumper pads
Battery operated lights
Nozzle includes 10" (25.4 cm) extension tube (not shown)
Unique 90 degree nozzle utilizes an air jet, opposite in direction to the blast stream, to balance the nozzle.
Applications: Removing general mold release agents, oils and greases, and some rubber compounds.
TN-182 - Part #: 5E0182
•
•
•
•
•
0.701" OD (1.78 cm) -Bullet Nozzle
At 80 psi (5.5 bar) requires 175 SCFM (5 m3/min)
Length: 9" (22.9 cm)
3-"Jet" blast openings for full circumferential blast jet
Alpha adapter required for this nozzle (P/N #: 3E0729)
Ideal for cleaning the walls of deep-cavity injection molds, and recessed areas.
19
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
D-Series Nozzles
Dry Ice
solutions
Alpheus
Series 51
•
•
Series 53
Series 56
Series 63
2"
(5.08 cm)
12751-512
13266-512
12751-532
13266-532
12751-562
12366-562
12751-632
13266-632
3"
(7.62 cm)
12751-513
12366-513
12751-533
13266-533
12751-563
13266-563
12751-633
13266-633
4"
(10.16 cm)
12751-514
12366-514
12751-534
13266-534
12751-564
13266-564
12751-634
13266-634
5"
(12.7 cm)
12751-515
12366-515
12751-535
13266-535
12751-565
13266-565
12751-635
13266-635
6"
(15.24 cm)
12751-516
12366-516
12751-536
13266-536
12751-566
13266-566
12751-636
13266-636
7"
(17.78 cm)
12751-517
13266-517
12751-537
13266-537
12751-567
13266-567
12751-637
13266-637
8"
(20.32 cm)
12751-518
13266-518
12751-538
13266-538
12751-568
13266-568
12751-638
13266-638
Blue color represents Black ABS. Other listing is Aluminum.
All have 1 1/4" (3.18 cm) OD.
Choosing a Stinger for your nozzle (using combination chart below):
• Determine your desired blast pressure (i.e.: if you wish to blast at 90 psi (6.21 bar), choose an LF85, MF85,
•
•
or HF85 stinger, each with
an operating range of 50 - 100 psi (3.4 - 6.8 bar).
Based on the air flow rate your compressor can provide, choose a Low-Flow, Medium-Flow, or High-Flow stinger. (For maximum
cleaning aggression, choose the highest air flow available from your compressor).
Once you have selected a stinger, examine the chart below to determine which nozzle series (above) is appropriate for that stinger.
EXAMPLE: If you wish to blast at 90 psi (6.21 bar) and your compressor can supply 160 SCFM (4.5 m3/min), you would choose an MF85
stinger and a matching nozzle from Series 53.
STINGER-PSI
Low Flow
Med. Flow
High Flow
Minimum Required
Flow Rate
Desired Operating Range
/min)
Stinger
LF-50
25 - 50 psi (1.7 - 3.4 bar)
70 SCFM (2.0
LF-85
50 - 100 psi (3.4 - 6.8 bar)
110 SCFM (3.1
m3
LF-125
100 - 125 psi (6.8 - 8.5 bar)
160 SCFM (4.5
m3
MF-50
25 - 50 psi (1.7 - 3.4 bar)
120 SCFM (3.4
m3
MF-85
50 - 100 psi (3.4 - 6.8 bar)
150 SCFM (4.2
m3
MF-125
100 - 125 psi (6.8 - 8.5 bar)
225 SCFM (6.4
m3
HF-50
25 - 50 psi (1.7 - 3.4 bar)
HF-85
50 - 100 psi (3.4 - 6.8 bar)
195 SCFM (5.5 m3/min)
12754-032
HF-125
100 - 125 psi (6.8 - 8.5 bar)
240 SCFM (6.8 m3/min)
12754-033
t
/min)
12754-012
t
/min)
12754-013
/min)
12754-021
/min)
12754-022
/min)
12754-023
125 SCFM (3.5 m3/min)
12754-031
20
+1-513-831-3411 t +1-800-337-9423
t
51 53 56 63
12754-011
m3
www.coldjet.com
t
t
t
t
t
t
t
D-Series Nozzles
delivering
advanced
Dry Ice
solutions
Alpheus
Fan Nozzle - Part #: 13407-001 (Aluminum)
13407-002 (Stainless Steel)
•
•
•
Length: 15.5" (39.4 cm)
Blast swath 2.375" x 0.25" (6.033 cm x 0.635 cm)
Medium Air Flow of 85
Ideal for easier to clean applications, less aggressive than barrel nozzles.
Extended Length Nozzles - Aluminum Wrapped ABS
- Part #: 13070
•
Customized to any length from 18" to 36" (45.72 cm to 91.44 cm)
Ideal for longer distance hard to reach areas.
Bendable Nozzle - Part #: 13308-002 (5/8"/1.59 cm Dia.)
13308-001 (1/2"/1.27 cm Dia.)
•
•
•
•
Length: 8" (20.32 cm)
Allows you to gently shape the barrel to get around obstructions that block your cleaning path
Due to its diameter, this nozzle is low-flow and may be less aggressive than larger diameter nozzles
NOTE: Special stinger part number 12754-003 may be required
Ideal for hard to reach areas.
21
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
N-Series Nozzles
Dry Ice
solutions
Alpheus
N-Series Standard Round Nozzles
Part Number
Size (L x OD)
ID
12649-001
11391-001
12413-002
12" L x 1.25" OD
12" L x 1.25" OD
12" L x 1.25" OD
0.63" (1.6 cm)
0.633" (1.608 cm)
0.5" (1.27 cm)
12413-003
12413-004
12413-005
12" L x 1.25" OD
12" L x 1.25" OD
12" L x 1.25" OD
0.562" (1.427 cm)
0.625" (1.587 cm)
0.687" (1.745 cm)
12413-006
12413-007
12413-008
12413-009
12" L x 1.25" OD
12" L x 1.25" OD
12" L x 1.25" OD
12" L x 1.25" OD
0.75" (1.905 cm)
0.594" (1.509 cm)
0.656" (1.666 cm)
0.531" (1.349 cm)
•
Choosing a Stinger for your nozzle (using the combination chart below):
•
•
Once you have selected a stinger, examine the chart below to determine which nozzle is appropriate for that stinger.
stinger and matching nozzle.
Stingers for Standard Round Nozzles #12413-00X
STINGER-PSI
Low Flow
Med. Flow
High Flow
22
Operating Range
Required Flow Rate
Stinger
Nozzle
12404-011
12413-002
/min)
12404-012
12413-002
/min)
12404-013
12413-009
LF-50
25 - 50 psi (1.7 - 3.4 bar)
70 SCFM (2.0
LF-85
50 - 100 psi (3.4 - 6.8 bar)
110 SCFM (3.1
m3
LF-125
100 - 125 psi (6.8 - 8.5 bar)
160 SCFM (4.5
m3
LF-200
150 - 175 psi (10.2 - 17.0 bar)
215 SCFM (6.1
m3
/min)
12404-014
12413-003
LF-300
200 - 300 psi (13.6 - 20.4 bar)
255 SCFM (7.2 m3/min)
12404-015
12413-004
MF-50
25 - 50 psi (1.7 - 3.4 bar)
120 SCFM (3.4 m3/min)
12404-021
12413-002
MF-85
50 - 100 psi (3.4 - 6.8 bar)
150 SCFM (4.2 m3/min)
12404-022
12413-003
MF-125
100 - 125 psi (6.8 - 8.5 bar)
225 SCFM (6.4
m3
/min)
12404-023
12413-003
MF-200
150 - 250 psi (10.2 - 17.0 bar)
305 SCFM (8.6
m3
/min)
12404-024
12413-004
HF-50
25 - 50 psi (1.7 - 3.4 bar)
125 SCFM (3.5
m3
/min)
12404-031
12413-009
HF-85
50 - 100 psi (3.4 - 6.8 bar)
195 SCFM (5.5
m3
/min)
12404-032
12413-007
HF-125
100 - 125 psi (6.8 - 8.5 bar)
240 SCFM (6.8
m3
/min)
12404-033
12413-008
HF-200
150 - 250 psi (10.2 - 17.0 bar)
340 SCFM (9.6
m3
/min)
12404-034
12413-005
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
/min)
m3
N-Series Nozzles
delivering
advanced
Dry Ice
solutions
Alpheus
Aluminum Fan Nozzle - Part #: 11707-001
•
•
Size: 14" L x 2.5" W (35.56 cm x 6.35 cm)
Blast swath: 2" (5.08 cm)
Works with higher pressure applications.
23
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
A-Series Nozzles
Dry Ice
solutions
Alpheus
Series 51
•
•
Series 53
Series 56
Series 63
2"
(5.08 cm)
12751-512
13266-512
12751-532
13266-532
12751-562
13266-562
12751-632
13266-632
3"
(7.62 cm)
12751-513
13266-513
12751-533
13266-533
12751-563
13266-563
12751-633
13266-633
4"
(10.16 cm)
12751-514
13266-514
12751-534
13266-534
12751-564
13266-564
12751-634
13266-634
5"
(12.7 cm)
12751-515
13266-515
12751-535
13266-535
12751-565
13266-565
12751-635
13266-635
6"
(15.24 cm)
12751-516
13266-516
12751-536
13266-536
12751-566
13266-566
12751-636
13266-636
7"
(17.78 cm)
12751-517
13266-517
12751-537
13266-537
12751-567
13266-567
12751-637
13266-637
8"
(20.32 cm)
12751-518
13266-518
12751-538
13266-538
12751-568
13266-568
12751-638
13266-638
All have 1 1/4" (3.175 cm) OD.
Choosing a Stinger for your nozzle (using the combination chart below):
•
•
Once you have selected a stinger, examine the chart below to determine which nozzle series (above) is appropriate for that stinger.
stinger and a matching nozzle from Series 53.
STINGER-PSI
Low Flow
LF-50
LF-85
LF-125
Med. Flow
MF-50
MF-85
High Flow
Minimum Required
Flow Rate
Desired Operating Range
25 - 50 psi (1.7 - 3.4 bar)
70 SCFM (2.0
50 - 100 psi (3.4 - 6.8 bar)
100 - 125 psi (6.8 - 8.5 bar)
25 - 50 psi (1.7 - 3.4 bar)
50 - 100 psi (3.4 - 6.8 bar)
m3/min)
Stinger
12748-011
t
110 SCFM (3.1
m3/min)
12748-012
t
160 SCFM (4.5
m3/min)
12748-013
120 SCFM (3.4
m3/min)
12748-021
150 SCFM (4.2
m3/min)
12748-022
m3/min)
12748-023
MF-125
100 - 125 psi (6.8 - 8.5 bar)
225 SCFM (6.4
HF-50
25 - 50 psi (1.7 - 3.4 bar)
125 SCFM (3.5 m3/min)
12748-031
HF-85
50 - 100 psi (3.4 - 6.8 bar)
195 SCFM (5.5 m3/min)
12748-032
HF-125
100 - 125 psi (6.8 - 8.5 bar)
240 SCFM (6.8 m3/min)
12748-033
24
+1-513-831-3411 t +1-800-337-9423
t
51 53 56 63
www.coldjet.com
t
t
t
t
t
t
t
delivering
advanced
S-Series Nozzles
Dry Ice
solutions
Alpheus
S-Series Standard Round Nozzle Part #: 13432-001
•
•
•
•
Low Flow
Size: 12.38" L x 1" OD x 0.32" ID (31.43 cm L x 2.54 cm OD x 0.80 cm ID)
Part #: 13432-002
High Flow
Size: 12.38" L x 1" OD x 0.53" ID (31.43 cm L x 2.54 cm OD x 1.33 cm ID)
Ideal for most single-hose cleaning applications.
S-Series Snub Nose Round Nozzle Part #: 13631-001
•
Size: 6" L x 1" OD (15.24 cm L x 2.54 cm OD)
Ideal for use in confined spaces. Shorter version of Standard Round Nozzle.
S-Series Bent Tube Nozzle Part #: 13427-745
•
•
•
•
•
•
High Flow
Size: 13.1" L x 7/16" OD (33.27 cm L x 1.11 cm OD)
o
45 angle
Part #: 13427-345
Low Flow
o
45 angle
S-Series Straight Tube Nozzle Part #: 13427-700
•
•
•
•
High Flow
Part #: 13427-300
Low Flow
Ideal for small openings and confined spaces.
S-Series Rounded Fan Nozzle Part #: 13430-001
•
•
•
Size: 12 3/4" L x 1 1/2" W x 0.4" H (32.38 cm L x 3.81 cm W x 1.02 cm H)
Requires 1" (2.54 cm) ring (P/N# 70506-002) for recommended handle (P/N# 13627-001A) and grip
(P/N# 80169-023).
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
25
S-Series Nozzles
delivering
advanced
Dry Ice
solutions
Alpheus
S-Series Rounded Fan Nozzle Part #: 13498-001
•
•
•
•
•
•
•
•
•
•
•
Size: 24" L x 2.230" W (60.96 cm L x 5.664 cm W)
Blast swath: 1.75" (4.445 cm)
Requires 1 1/2" (3.81 cm) ring (P/N# 70506-004) for recommended handle (P/N# 13627-001A) and
grip (P/N# 80169-023)
Part #: 13426-001
High Flow
Size: 24" L x 1.230" W x 1" H (60.96 cm L x 3.124 cm W x 2.54 cm H)
(P/N# 80169-023)
Part #: 13426-002
Low Flow
Size: 24" L x 1.380" W x 1" H (60.96 cm L x 3.505 cm W x 2.54 H)
(P/N# 80169-023)
Ideal for longer, harder to reach and overhead areas.
S-Series 45o Angle Extended Fan Nozzle Part #: 13475-020
•
•
•
•
•
•
•
•
High Flow
Size: 20" L x 2" W (50.8 cm L x 5.08 cm W)
Includes 1 1/4" (2.858 cm) grip ring assembly
Part #: 13605-020
Low Flow
Size: 20" L x 2.340" W (50.8 cm L x 5.944 cm W)
Includes 1 1/4" (2.858 cm) grip ring assembly
26
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
T-2 Nozzles
Dry Ice
solutions
Alpheus
T-2 Nozzles Part #: 14323-129 - Length 9" (22.86 cm)
14323-126 - Length 6" (15.24 cm)
•
•
•
•
•
•
•
•
•
Low Flow
Yellow color
12 cfm (0.34 m3/min)
Part #: 14323-259 - Length 9" (22.86 cm)
14323-256 - Length 6" (15.24 cm)
Low Flow
White color
25 cfm (0.71 m3/min)
Part #: 14323-509 - Length 9" (22.86 cm)
14323-506 - Length 6" (15.24 cm)
Low Flow
Blue color
50 cfm (1.42 m3/min)
27
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Nozzle Accessories
delivering
advanced
Dry Ice
solutions
Cold Jet
Nozzle Case - Part #: 3E0773C
•
•
•
•
Protect and store nozzles in this mobile rugged plastic case
Holds up to 11 nozzles and accompanying accessories
Wheels on one end for easy transport
Nozzles shown are sold separately
Adjustable Tube Handle
Part #: 2E0275 - 3/4” (1.9 cm) OD
2E0209 - 1” (2.6 cm) OD
2E0289 - 1 3/16” (3 cm) OD
•
•
•
Slides easily and rotates around the extension tubes for optimal comfort and control
Fully adjustable. Loosen and lock by rotating the handle.
Allows for a horizontal or vertical orientation
Threaded Nozzle Handle - Part #: 2E0245
•
•
Improves ergonomics
Threads into 307 BL nozzle
Adjustable Clamp-Style Nozzle Handle - Part #: 2E0287
•
•
This handle slides along grooves milled into the edges of the new rectilinear nozzles
Designed to work with the 218 SL and 223 SL nozzles
Alpha Series 1/2” (1.3 cm) to 1” (2.5 cm) Adapter
Part #: 2E0295
•
•
•
Permits all nozzles to be used with the flange style 1" (2.54 cm) OD nozzle extension tube
Allows the 1" (2.54 cm) OD nozzle extension tube to be used with Cold Jet Applicators
Aluminum
Alpha Series 3/4” (1.9 cm) Base Coupler Part #: 3E0729
•
28
•
Allows the Micro-Series (MS) type nozzles to be used with the Cold Jet Applicators or other
nozzle base
Aluminum
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Nozzle Accessories
delivering
advanced
Dry Ice
solutions
Cold Jet
Nozzle Base - Part #: 2E0233
•
•
•
Provides for the extension of any Radial Feed Series nozzle in a 1800 orientation beyond
the exit of the blast applicator
The patented 180o base turns blast flow 180o while maintaining pellet integrity and blast
aggression
Ideal for cleaning confined spaces
Quick Change Module - Part #: 2E0290
•
•
Enables quick and safe nozzle changes
Can be used with all of Cold Jet's nozzles, with appropriate couplings and end fittings
3/4" (1.9 cm) JICF Quick Change Module
Part #: 2E0360
•
•
•
Used on the 90-Degree In-Line Applicator
Enables quick and safe nozzle changes
Can be used with all of Cold Jet's nozzles, with appropriate couplings and end fittings
JIC Modular End Fittings
1” (2.5 cm) JIC - Part #: 2N0060
3/4” (1.9 cm) JIC - Part #: 2N0064
•
•
Allows a nozzle base, extension tubes, or a rotary union to be connected directly to the blast hose
Aluminum
Precision Rotary Union - Part #: 2N0073
•
•
Allows full rotation when a nozzle is attached to a blast hose or extension tube
Stainless Steel
3/4” (1.9 cm) JIC Rotary Union - Part #: 2N0163
•
•
•
•
Allows full rotation when a nozzle is attached to a blast hose, extension tube, or appropriate
nozzle extension
3/4" (1.9 cm) JICF to 3/4" (1.9 cm) JICM
Lightweight
Hard-coat anodized Aluminum
Adapter, Nozzle Retention x 3/4" (1.9 cm) JICF
Part #: 3E0842
•
Allows all flange-style nozzles to be used with the 90-Degree In-Line Applicator
29
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Nozzle Accessories
delivering
advanced
Dry Ice
solutions
Cold Jet
Flange Style 1” (2.54 cm) OD Nozzle Extension Tube
Part #: 2E0312 - Length
2E0226 - Length - with coupler
•
•
•
•
Used for extending nozzle-base assemblies with minimum pressure loss
Can be used with all available nozzles
Available in 2" (5.1 cm), 10" (25.4 cm), 20" (50.8 cm) or 30" (76.2 cm) lengths
Stainless Steel
3/4” (1.9 cm) OD Nozzle Extension Tube
Part #: 3E0715 - Length
•
•
•
•
Used for extending Micro-Series (MS) type nozzles directly from the applicator or nozzle-base
Available in 5" (12.7 cm), 10" (25.4 cm), 15" (38.1 cm) or 20" (50.8 cm) lengths
Stainless Steel
Recommend purchasing a 3/4" (1.9 cm) JICM Fitting (12HTX-S) with this Extension Tube
1” (2.54 cm) OD Nozzle Bent Entry Tube
Part #: 2E0227
•
•
•
•
Used for turning nozzle-base assemblies with minimum pressure loss
Can be used with all nozzles
Standard turning angle is 80 degrees, but other angles are available through special order
Stainless Steel
1” (2.54 cm) OD Nozzle Bent Entry Tube with Extension
Part #: 2E0259
•
•
•
•
Used for turning nozzle-base assemblies with minimum pressure loss
Can be used with all nozzles
Turning angle of 80 degrees with an 11" (28 cm) linear extension after the turn
Stainless Steel
30
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Nozzle Accessories
delivering
advanced
Dry Ice
solutions
Cold Jet
1" (2.54 cm) Nozzle Deflector Plate
Part #: 2E0367
•
•
Used with the 523 SF and 412 SL nozzles to break-up pellets
Nozzle sold separately
2" (5.08 cm) Nozzle Deflector Plate
Part #: 2E0352
•
•
Used with the 807 SL nozzle to break-up pellets
Nozzle sold separately
Flow Divider
Part #: 2E0320 - 1 1/4” (3.2 cm) Hose to Two 1” (2.5 cm)
•
•
•
Hoses
2E0319 - 1 1/2” (3.8 cm) Hose to Two 1 1/4” (3.2 cm)
Hoses
2G1157 - Dual Trigger Interconnect Box
Splits one blast hose into two blast hoses for simultaneous blasting
The unique flow path contour allows the pellets to separate into two paths while maintaining pellet integrity
A dual-trigger interconnect box is required (P/N #: 2G1157)
31
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Nozzle Accessories
delivering
advanced
Alpheus
Cold Jet MS Nozzle Adapter to Alpheus S-Series
Applicator - Part #: 3N0050
•
•
•
Used to attach Cold Jet MS-Series nozzles to Alpheus S-Series Applicator
Can be used with all Cold Jet MS-Series nozzles
Aluminum
Handle for Nozzle Handle Assembly
Part #: 13627-001
•
•
•
Handle allows for easier maneuverability and improved ergonomics of nozzles while blasting
Can be used with all Alpheus nozzles
Entire Handle Assembly shown at left
Grip for Nozzle Handle Assembly
Part #: 80169-023
•
Rubber coating placed over handle for easier grip
Ring for Nozzle Handle Assembly
Part #: 70506-002 (1"/ 2.54 cm)
70506-003 (1 1/4" / 2.88 cm)
70506-004 (1 1/2" / 3.81 cm)
70506-005 (7/8" / 2.223 cm)
•
•
Slides easily and rotates around the nozzle for optimal comfort and control
Attaches to Handle
32
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Dry Ice
solutions
delivering
advanced
Dry Ice
solutions
Cold Jet
Low-Pressure Urebrade Core Blast Hose
Part #: 12-UNS-0240-0000
3/4" (1.9 cm) ID, 140 psi (8.3 bar), 20' (6.1 m) section
Part #: 12-U5S-0240-0000 with control cable
Part #: 16-UNN-0240-0000
1" (2.5 cm) ID, 140 psi (8.3 bar), 20' (6.1 m) section
Part #: 16-U5N-0240-0000 with control cable
Part #: 20-UNN-0240-0000
1 1/4" (3.2 cm) ID, 140 psi (8.3 bar), 20' (6.1 m) section
Part #: 20-U5N-0240-0000
with control cable
Full-Pressure Kevlar Braided Blast Hose with
Urebrade Core
Part #: 16-KNN-0240-0000
Part #: 16-K5N-0240-0000 with control cable
Part #: 20-KNN-0240-0000
1.25" (3.2 cm) ID, 300 psi (20.7 bar), 20' (6.1 m) section
Part #: 20-K5N-0240-0000
with control cable
Full-Pressure Stainless Steel Blast Hose
Part #: 16-SNN-0240-0000
Part #: 16-S5N-0240-0000 with control cable
Compressed Air Hose •
•
•
Part #: 2N0146-G1
25' (7.6 m) Section 1" (2.5 cm) ID 300 psi (20.7 bar)
Used to carry pressurized air from air source to blast unit.
Includes swivel adapters.
For each length of hose ordered, order one Whip Check! (see page 44)
Control Cable - Part #: 4G0819
•
•
20' (6.1 m) Section.
Use to connect switch or applicator to blast unit.
33
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Dry Ice
solutions
Cold Jet
JIC Blast
Part
Part
Part
Part
Part
Hose Fittings
#: 12HTX-S - 3/4" (1.9 cm) JICM
#: 16HTX-S - 1" (2.5 cm) JICM
#: 20HTX-S - 1 1/4" (3.2 cm) JICM
#: 16-12HTX-S - 1" JICM (2.5 cm) to 3/4" (1.9 cm) JICM
#: 16-12TRBTX-S - 1" (2.5 cm) JICF sleeve to 3/4"
(1.9 cm) JICM nut
Part #: 5N0004 - 1 1/4" (3.2 cm) JICF to 1" (2.5 cm)
JICM aerodynamic
Part #: 5N0003 - 1 1/4" (3.2 cm) JICM to 1" (2.5 cm)
JICM aerodynamic
Compressed Air Hose and Plant Air Pipe Fitting
Part #: 4N0123 - Female Swivel Adapter
Control Cable Accessories
Male Plug - Part #: 4G0821
Female Receptacle - Part #: 4G0833* - Cable clamp
4G0834* - 5-pin socket
•
34
Replacements for damaged end fittings on control cable.
*(both required)
JICF to JICM Adapter
1" (2.5 cm) JICF to 1 1/4" (3.2 cm) JICM Adapter
Part #: 2406-16-20
3/4" (1.9 cm) JICF to 1" (2.5 cm) JICM Adapter
Part #: 2406-12-16
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Dry Ice
solutions
Alpheus
D-Series Blast Hose Assembly
Part #: 13208-E15
Hose & Gun Assembly, 15' (4.57 m) section, 125 psi (8.62 bar) for
Alpheus PT-110
Part #: 13208-M20E
Hose & Gun Assembly, 20' (6.1 m) section, 150 psi (10.34 bar) for
Alpheus SDI-5
N-Series Blast Hose Assembly
Part #: 12722-000
Hose Assembly only, 20' (6.1 m) section, 150 psi (10.34 bar) for Alpheus SDI-5
Part #: 12312-001
Stainless Steel Hose Assembly only, 25' (7.62 m) section, 300 psi (20.7 bar) for
Alpheus SDI-5
A-Series Blast Hose Assembly
Part #: 13274-E15
Hose & Gun Assembly, 15' (4.57 m) section, 125 psi (8.62 bar) for Alpheus PT-110
Hose Assembly only - Part #: 12792-E15A
Part #: 13274-M20
Hose & Gun Assembly, 20' (6.1 m) section, 125 psi (8.62 bar) for Alpheus SDI-5
Hose Assembly only - Part #: 12792-M20A
S-Series Blast Hose Assembly
Part #: 13452-PTX20
Hose Assembly only, 20' (6.1 m) section, 125 psi (8.62 bar) for Alpheus Power PTX
Ice Wand Blast Hose Assembly
Part #: 14325-002
Hose & Gun Assembly, 15' (4.57 m) section 120 psi (8.27 bar) for Alpheus T-2
35
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Dry Ice
solutions
Alpheus
Air Supply Hose - Part #:13063-001
•
•
Low Pressure 25' (7.6 m) Section, 1" (2.5 cm) ID 150 psi (10.34 bar)
Used to carry pressurized air from air source to blast unit (for all Alpheus blast systems except
T-2)
Guerilla Air Supply Hose - Part #:11487-001
•
•
High Pressure 25' (7.6 m) Section, 1" (2.5 cm) ID 300 psi (20.7 bar)
Used to carry pressurized air from air source to blast unit (for all Alpheus blast systems except
T-2)
T-2 Air Supply Hose - Part #:14399-001
•
•
•
25' (7.6 m) Section, 1/2" ID (1.27 cm)
Used to carry pressurized air from air source to blast unit (for Alpheus T-2 blast system)
Hose assembly comes with fittings
36
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Accessories
Dry Ice
solutions
Cold Jet
Externally Mounted Coalescing Air Filter (CAF)
Part #: 2M0020-G3
•
•
Designed to remove large amounts of water, oil, rust, and/or other particles from the air supply
Optional pressure regulator available to precisely control incoming air pressure
Externally Mounted Coalescing Air Filter (CAF)
for AeRO 30 - Part #: 2M0018-G2
•
High
Low
Designed to remove large amounts of water, oil, rust, and/or other particles from the air supply
Air Pressure Regulator
Internal Low-Working Pressure (for AeRO 75 and 75-DX)
- Part #: 2I0100-G2
External Low-Working Pressure - Part #: 2M0020-G1
External High-Working Pressure - Part #: 2M0020-G2
•
Externally mounted - can be mounted at the plant's air drop, on a machine mounted CAF, or on
an air inlet to the Cold Jet Blast Units
1 1/2 lbs/min (0.68 kg/min) Rotor - Part #: 3E0847
3 lbs/min (1.4 kg/min) Rotor - Part #: 3E0848
•
Used in the Cold Jet AeRO 30 only
AeRO 30 Conversion Kit* to 3 lbs/min - Part #: 3E0848
•
•
Includes the following parts/accessories:
•
•
•
3 lb/min (1.4 kg/min) Rotor - Part #: 3E0833
1" (2.5 cm) Urebrade Blast Hose with control cable - Part #: 16-U5N-0240-0000
3/4" (1.9 cm) JICF to 1" (2.6 cm) JICM Adapter - Part #: 2406-12-16
With the Conversion Kit you may choose one nozzle from Cold Jet Group A or B.
Note: This nozzle is not added to the nozzle that comes with the system initially; purchasing the conversion
kit will allow you to choose from a wider selection of nozzles.
* This conversion kit is sold as a kit only when purchased with an AeRO 30. If conversion is desired at a
later date, each individual part (above) must be purchased seperately.
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
37
delivering
advanced
Accessories
Dry Ice
solutions
Alpheus
Dry Ice Block Handler - Part #: 12728-001
•
Allows for easy transport of block ice from container to blasting machine
T-2 Transport cart with Air Filter
•
•
Allows for easy transport of T-2 blast system
Includes Air Filter
38
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Dry Ice
Pelletizers
solutions
P325
•
•
Automatic pellet production capability of up to 300 lbs (136.4 kg) of dry ice per hour
Choice of 1 mm, 2 mm, 3 mm, or 6 mm diameter high-density pellets
P750
•
•
Choice of 1 mm, 2 mm, 3 mm, or 6 mm diameter high-density pellets, or 9 mm, 12 mm, 16
mm or 19 mm diameter high-density nuggets
P1500
•
•
Choice of 1 mm, 2 mm, 3 mm, or 6 mm diameter high-density pellets, or 9 mm, 12mm, 16 mm
or 19 mm diameter high-density nuggets
P3000
•
•
Choice of 1 mm, 2 mm, 3 mm, or 6 mm diameter high-density pellets, or 9 mm, 12 mm 16
mm or 19 mm diameter high-density nuggets
Pelletizer Features
• Programmable Logic Controller (PLC) offers operating flexibility
• One button emergency stop function
• Built in fork lift tubes
• All welded steel, powder coated frame
• Fills blast unit or pellet boxes with dry ice
• System redundancy for enhanced reliability
Options
• Stainless Steel hoods and washdown panel option (P750 and P1500 only)
• Die plates to produce a variety of pellet sizes
• Hardware kit to connect to a CO2 vapor recovery system
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
39
delivering
advanced
Pelletizer
Accessories
Dry Ice
solutions
High-Density Die Plates
Available in the following diameters:
1 mm
9 mm
2 mm
12 mm
3 mm
16 mm
6 mm
19 mm
•
•
Interchangeable die plates
All dry ice produced is of the highest density achievable resulting in a lower sublimination rate
Stainless Steel Hoods and Panel Kit
Part #: 2J0139 - for P750
Part #: 2J0137 - for P1500
•
Wash-down capable skin panels and hoods located over extruders
Vapor Recovery Kit
Part #: 2K0096 - for P750
Part #: 2K0090 - for P1500
Part #: 2K0090 - for P3000
•
(2 required)
Recommended back-pressure is no more than 10 psi (0.7 bar). Higher back-pressure will influence the
flow of liquid CO2 into the snow chamber and can decrease production rate and dry ice quality
Dry Ice Storage Containers
Part #: 4E0076 - 11 Cubic Foot (0.3 m3)
Part #: 4E0082 - 11 Cubic Foot (0.3 m3) with casters
and hinged lid
Part #: 4E0079 - 19 Cubic Foot (0.5 m3)
•
•
•
Insulated for optimum preservation
Removable lids for easy filling
Fork lift accessible
40
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Dry Ice
Block Maker
solutions
BlockMaster
The Alpheus Series BlockMaster uses liquid carbon dioxide to create consistent, high-quality dry ice in easy-to-handle 5” x 5” x
10” (127 mm x 127 mm x 254 mm) blocks.
Compact and convenient the Alpheus Series BlockMaster has intuitive and ergonomic controls, which make it easy to operate.
Its small footprint and light weight allow for easy transport and quick installation almost anywhere. Finally, its low energy consumption makes it a cost-effective piece of quality equipment.
Features
• Small footprint and light weight allow for easy transport and quick installation almost anywhere
• Quick startup and shutdown period
• Ergonomic control panel is high-mounted for easy reach
• CO2 Block Size: 5” x 5” x 10” - max. weight 13.5 lbs - (127 mm x 127 mm x 254 mm - max. weight 6 kg)
• CO2 Inlet Pressure: 250 - 300 psi (17 - 20 bar)
• Production Capacity: 360 lbs (164 kg) per hour
41
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Engineered Systems
Dry Ice
solutions
Integrated Systems
Integrated Systems combine and interface a Cold Jet Pelletizer with one or more Cold Jet blasting
systems and provide for continuous, uninterrupted, completely automated operations. Each Cold
Jet Integrated System is custom engineered to meet specific customer requirements. Cold Jet
has the unique capability to act as either a Prime Contractor or Sub-Contractor in designing,
installing and supporting a complete manufacturing work cell which may include not only the Cold
Jet Integrated System, but also flexible automation, collection and containment systems, and
other production-line interfaces. We have installed and supported Integrated Systems in the
semiconductor processing industry, the copier machine industry, the tire industry, the automotive
OEM and aftermarket parts industry and the aerospace industry.
Features
• Ability to run multiple nozzle stations
• Fully automated - no interruption of work to fill machine with dry ice pellets
• Works with robots or manual blasting
• Ideal for integration with a production line
• Operating pressure up to 300 psi (20.7 bar)
(Pressure relief valve will be set at 140 psi (9.7 bar) unless otherwise specified)
Option
• Control System (Allen-Bradley, Siemens, Telemechanique)
Automated Cleaning Booth
This Automated Cleaning Booth has been designed for dry ice cleaning applications that
require repetitive spraying on similar sized parts, hour after hour, all week long. This booth is
a quiet, soundproof enclosure with advanced micro-particle filtration and effluent capture system to
collect or reclaim the contaminant being removed.
Features
• External noise below 80 dBA
• Fully integrated safety circuits and E-stops
• Double-glazed viewing window plus cabinet workspace lighting
• Positive pressure cabinet design
• Can be used with compressed air or nitrogen as blast propellant
• Nozzle path motion accomplished with off-the-shelf, easy to program and use, multiple axis
industrial robot mounted inside the cabinet
• Cabinet can be constructed with slide-out trays, or a variety of parts loading and parts fixture
devices depending on the application
• Uses any of Cold Jet's single-hose blasting systems, or can be part of a Cold Jet integrated
system with pelletizer, blasting unit, and the cabinet combined
• Custom designed air handling and filtration
• Glove-box version available for manual blasting
• Cold Jet's single-hose blasting unit can be detached for use elsewhere in your plant when the cabinet
is not in service
42
All systems are custom configured based on the application.
Custom configurations are available through your Cold Jet Representative.
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Engineered Systems
Dry Ice
solutions
FLASHJET®
The patented FLASHJET® coatings removal process utilizes highly sophisticated technology to strip all
types of coatings from both composite and metallic substrates without damage. This system is
approved by both the Department of Defense and the Federal Aviation Association for military and
commercial aircraft.*
Features
Three simultaneous processes:
• Pulsed-light energy ablates the coating
• Dry ice cools and cleans the surface
• Effluent is vacuumed into a capture system
Results
• Efficient coatings removal
• Reduced operating costs
• Safe for metallic and composite substrates
• Low volume of residual effects
• Minimal safety requirements
* This is a specialized joint venture between Cold Jet and Flash Tech, Inc. All systems are custom configured.
More information is available through our FLASHJET® specialist.
43
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Safety
Accessories
Dry Ice
solutions
Acoustical Screen - Part #: 4K0017 or
4K0018 - with free standing frame
•
•
•
•
4' x 8' (1.2 m x 2.4 m) screen
The screen has a Noise Reduction Coefficient (NRC) of 0.85 and a Sound Transmission Class (STC)
of 29 dBA
Can reduce noise exposure up to 12 dBA
Optional mounting assembly
Fire Sleeve
Part #: 4N0094 - 3/4” (1.9 cm) ID
4N0152 - 1” (2.5 cm) ID
4N0153 - 1 1/4” (3.2 cm) ID
•
•
Recommended if blast hose may be exposed to temperatures above 180o F (82.2oC)
Allow 4" to 20" (1.2 m to 6.1 m) coverage for area of blast hose subject to high heat
Whip Check - Part #: 4Z0051
•
For each length of hose ordered, order one Whip Check
Safety Kit - Part #: 2Z0001
•
•
Meets OSHA requirements for operator noise protection (with the use of properly rated
and worn earplugs)
Kit includes: 100 sets of ear plugs, 2 ear protectors, an eye protector shield, gloves and a dry ice
pellet scoop or handler
44
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Services
Customer Support
delivering
advanced
Dry Ice
solutions
Support Hotline (24 hours a day, 7 days a week)
East Coast - 1-800-777-9101
+1-513-831-3211 (ext. 397)
West Coast - 1-800-445-6131
+1-909-481-6444 (ext. 229 or 235)
Europe +32 (0) 2 467 41 01
Services You Can Depend On
Cold Jet, LLC has earned its reputation as the industry leader in patented dry ice technology by delivering high-quality products,
exceptional service and unparalleled support. At Cold Jet we focus on what is important - delivering and supporting advanced dry
ice solutions.
Service Center
Our technicians are factory trained to install your system(s), and to provide product maintenance and repair. The service
centers are located in our manufacturing facilities, ensuring that our technicians are current on the latest technology and
enhancements available from Cold Jet. This also allows easy access to our highly skilled engineering department for their input on
complex questions and custom configuration requirements.
Service and Maintenance Programs
Cold Jet offers proactive and preventive services. Our professionals can:
handle complex installations and provide training
conduct site surveys to ensure that systems are properly installed and make recommendations in order to maximize
performance
• administer regularly scheduled maintenance programs to keep your system working at maximum efficiency.
• answer questions and provide support when standard troubleshooting tips are not sufficient
• provide temporary replacement systems while your system is being repaired at our facility. Whenever possible or when
necessary they will handle repairs on-site.
•
•
Spare parts and accessories
The members of Cold Jet's customer support team are experts in maximizing the performance of your system(s). Certain applications benefit from specialized configurations. Our highly-trained customer support team is available to answer questions and provide
direction on which configuration will result in the best possible performance for you. Our professionals will:
• recommend appropriate accessories to maximize performance.
• fulfill spare part orders and, if necessary, handle the installation.
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
45
Services
Dry Ice Delivery
Contact Information:
delivering
advanced
Dry Ice
solutions
M-F 8:30 a.m - 5:00 p.m. (Eastern Standard Time)
1-800-736-3423 East Coast
M-F 8:30 a.m - 5:00 p.m. (Pacific Standard Time)
1-877-437-9423 West Coast
Quality You Can Depend On
Cold Jet, LLC pioneered and patented the technology that produces high-density dry ice pellets. The quality of Cold
Jet pellets significantly improves the performance of dry ice blasting systems as the high-density pellets sublimate more
slowly and have an increased blasting aggression over other comparable dry ice media. We continually monitor our
production facilities to ensure that produce and distribute only the highest quality dry ice products.
The Product
Cold Jet, LLC manufactures and distributes the highest quality high-density:
• dry ice pellets
• nuggets
• block
Distribution is available locally as well as globally. Call for information about delivery in your area.
Service Programs
Our trained technicians will make recommendations on which media will maximize performance for your application.
The dry ice division manages blanket orders, recurring orders and onetime orders.
We will coordinate:
• 48-hour delivery to ensure fresh ice
• delivery schedules that work with holidays and plant shutdowns
• delivery of media that coincides with the installation of new blasting systems
• job logistics for contractors
46
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
Services
Cold Jet Solutions
Contact Information:
delivering
advanced
Dry Ice
solutions
M-F 8:30 a.m - 5:00 p.m. (Eastern Standard Time)
1-800-3-DRY-ICE (337-9423)
(513) 831-3211 (Cincinnati, OH)
(706) 798-1344 (Augusta, GA)
An integral part of our full service offering is Cold Jet Solutions. Cold Jet Solutions provides dry ice blast cleaning services and short-term rental programs across a broad spectrum of industrial and commercial cleaning and coatings removal
applications. We provide all the benefits of dry ice blast cleaning for one-time and short-term projects to those customers
whose needs do not necessitate owning the equipment.
Contract Cleaning Services
Using Cold Jet's patented single-hose blast technology, Cold Jet Solutions provides contract cleaning services
performed by factory-trained technicians, who are certified in industry standard safety practices and procedures.
The work is handled either at the customer's site or in one of our Cold Jet Solutions Cleaning facilities.
Onsite cleaning includes personnel, labor, transportation, equipment, dry ice, accessories, support equipment
and personal protection equipment. Upon request, we will provide each customer with a Proof of Liability
Certificate and a Worker's Compensation Certificate. All work is handled at the customer's convenience,
including after hours and weekends. Customer application tests are handled on-site for a nominal fee that is
applied towards future business.
In-house cleaning includes verifying and documenting the receipt and shipment of the customer's parts which
are always handled per the customer's specifications. Our Loveland, OH and Augusta, GA facilities are fully
equipped to handle a range of cleaning and stripping applications, including fast turn around and emergency
jobs. Customer application tests are handled at our cleaning facility free of charge.
Short-Term Rentals
Cold Jet Solutions offers short-term rentals of our dry ice blasting systems. A complete system, configured to meet the
needs of the application, is delivered to the facility, including the necessary dry ice to get started. Comprehensive training
of on-site personnel is available with all short-term rentals.
www.coldjetsolutions.com
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
47
delivering
advanced
Warranty
Information
Dry Ice
solutions
Cold Jet, LLC ("CJL") warrants its products ("Equipment") provided under this Agreement to be free from
defects in materials and workmanship for a period of twelve months, under normal use, maintenance and
service as stipulated in the Operator's Manual. CJL warrants that the equipment will be in good working
order on the Date of Shipment and that it will conform to CJL's official published specifications.
The warranty period is twelve months for CJL manufactured Equipment. Original Equipment Manufacturers'
warranties provided by CJL on equipment not manufactured by CJL purchased under this Agreement will be
passed through to the Buyer. The warranty period commences on the Date of Shipment of the Equipment.
CJL's liability is limited to repairing or replacing, at its option, any covered part of its Equipment, which CJL has
determined to be defective. Said repair or replacement will be made by CJL or its authorized representative free of
charge to the Buyer, except for any freight or travel expenses, during the warranty period. Cold Jet will be responsible
for travel and living expenses for any European Warranty claims (pending approval from Cincinnati, OH). Any replaced
part will become the property of CJL. If, after repeated efforts, CJL is unable to restore its Equipment to good working
order, or replace the defective parts, all as warranted, CJL may replace the Equipment in its entirety at its discretion. Any
claim must be made in writing to CJL within 30 days after the defect is discovered and any claim not made within that
period shall be deemed waived or released and denied therefore.
Warranty service provided under this Agreement does not assume uninterrupted operation of the Equipment. The suitability of the equipment for the purpose intended is not included in the warranty.
This warranty shall not apply and CJL shall neither be responsible nor liable for:
a)
Consequential, collateral or special losses or damages;
b)
Equipment conditions caused by abnormal conditions of use, accident, neglect or misuse of
Equipment, improper storage or damages resulting during shipment as determined by CJL;
c)
The replacement of normal wear items, including but not limited to air, blast and whip end hoses;
d)
Deviation from the Equipment's prescribed maintenance programs, replacement parts, operating
instructions, specifications or other terms of sale;
e)
Labor charges, loss or damage resulting from improper operation, maintenance or repairs made by
person (s) other than CJL or CJL's authorized service representative;
f)
Improper application of the product.
In no event shall CJL be liable for claims, whether arising from breach of contract or warranty of claims of negligence or
negligent manufacture, in excess of the purchase price.
THIS WARRANTY IS THE SOLE WARRANTY OF CJL AND ANY OTHER WARRANTIES, EXPRESS, IMPLIED IN LAW
OR IMPLIED BY FACT, INCLUDING ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
USE, ARE HEREBY SPECIFICALLY EXCLUDED.
48
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Terms &
Conditions
Dry Ice
solutions
I. Payment Terms*
A.
New System Orders:
1.
Blasting Systems:
Net Thirty (30) Days after invoice date.
2.
Pelletizer Series and Engineered Systems:
One-third with the order, one-third upon
completion of manufacture and the balance net
Thirty (30) Days after invoice date. If an invoice
is required to remit the first and second payments,
it must be requested at the time of the order.
B.
Spare Parts Orders:
C.
Pellet Orders:
D.
Customer Support Services:
E.
Rental Orders:
$1,500 Security Deposit with the order, rental
payments Net Thirty (30) Days after invoice date.
Payments by Master Card, VISA, and Discover are accepted and will be billed at shipment.
II. Finance Charges
For all amounts not paid within these terms (or within other specific terms approved by Cold Jet, LLC in writing), Cold Jet,
LLC will invoice a finance charge in the amount of 1 1/2% per month on the unpaid balance. Customer agrees to Cold
Jet, LLC's selling terms and agrees to pay according to Cold Jet, LLC's payment terms. Customer agrees to pay finance
charges on past due balances.
*based on Cold Jet credit approval
49
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com
delivering
advanced
Dry Ice
solutions
www.coldjet.com
info@coldjet.com
+1-800-337-9423
+1-513-831-3211
52
+1-513-831-3411 t +1-800-337-9423
t
www.coldjet.com

Product Catalog - Dry Ice Blasting with Cold Jet

Transcription

Similar documents

PI May 2011 - Petroleum Technical Services LLC.

Fan-Jet® - Bowsmith

ultrashine drive through

Foaming Tool Product Sales Sheet

GOLDENHORN 12S

Wetblast Injector Systems

Super Soaker Monster XL (2000)

TorontoLime Rate Sheet

Nozzles - Clemco Industries Corp.

CAMP HIGHLIGHTS Memory Verse Upcoming Birthdays