Storm Cover Page.jpg
Transcription
Storm Cover Page.jpg
PRODUCT INFORMATION 3M TAPED LIGHTWEIGHT COVERALL 2 Tone Hi Vis BC6719TW Features • 3M Reflective Tape ‘Hoop’ pattern around body • Nylon press stud front opening and sleeve cuff fastening • Front right chest pocket with zipper opening • Front left chest pocket with tool/knife division • Angled side pockets and follow through pocket to body • Back utility patch pocket & ruler/phone pocket • Raglan Sleeve • Contrast coloured lower body • Double layer knee patch Fabric • 100% Cotton Preshrunk Drill 190gsm Size • Regular: 77-112 • Stout: 92-132 • Long: 74-94 Yellow/Navy (TT01) Orange/Navy (TT02) 1 piece collar Raglan Sleeve Durable Plastic Press studs Front RHS chest pockets with zipper opening Left front chest patch pocket with tool/knife division Angled side pockets and side opening to body 3M branded retroreflective tape stitched all around body and top sleeve in hoop pattern, finishing at side seams Concealed Press stud closure cuff Lower RHS ruler Pcoket Retroreflective tape stitched all around leg in hoop pattern, finishing at side seam Double layer knee patch for extra support Back utility patch pocket and ruler/tool pocket BC6719TW StormProcurementUK@storm.com PRODUCT INFORMATION AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOURS • AS/NZS 1020:1995: The Control of Undesirable Static Electricity THIS GARMENT IS 100% COTTON WITH NO METAL ZIPS OR BUTTONS, THEREFORE IT MAY BE USED AS A STATIC CONTROL GARMENT • AS/NZS 1906.4:2010: Hi Visibility Material For Safety Garments. THIS GARMENT MEETS THE FLUORESCENT CAPABILITIES AND THE CHROMATICITY READING TO ENSURE THAT THE BRIGHT COLOURS ARE WITHIN THE REQUIRED COLOUR RANGE. RETROREFLECTIVE TAPE ON THIS GARMENT ALSO MEETS THE RETROREFLECTIVE PERFORMANCE REQUIRED. • AS/NZS 4602.1:2011: Hi Visibility Safety Garments. Garments For High Risk Application. THIS GARMENT HAS A MINIMUM OF 0.2sqm OF HI VISIBILITY FABRIC ON THE FRONT AND BACK TO MEET DAY/NIGHT STANDARD. International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE OVERALLS MENS Sizes REGULAR 77R 82R 87R 92R 97R 102R 107R 112R 117R To fit chest size (cm) 87 92 97 102 107 112 117 122 127 To fit chest size (inches) 34 36 38 40 42 44 46 48 50 To fit waist size (cm) 77 82 87 92 97 102 107 112 117 To fit waist size (inches) 30 32 34 36 38 40 42 44 46 In-leg length (cm) 80 80 82 82 84 84 86 86 87 Imperial/NZ size 3R 4R 5R 6R 7R 8R 9R 10R 11R Sizes STOUT 87S 92S 97S 102S 107S 112S 117S 122S 127S 132S To fit chest size (cm) 97 102 107 112 117 122 127 132 137 142 To fit chest size (inches) 38 40 42 44 46 48 50 52 54 56 To fit waist size (cm) 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 34 36 38 40 42 44 46 48 50 42 In-leg length (cm) 78 78 80 80 82 82 83 83 83 83 Imperial Size 3.25S 4.25S 5.25S 6.25S 7.25S 8.25S 9.25S 10.25S 11.25S 12.25S NZ size 5S 6S 7S Sizes LONG 74L 79L 84L 89L 94L To fit chest size (cm) 87 92 97 102 107 To fit chest size (inches) 34 36 38 40 42 To fit waist size (cm) 77 82 87 92 97 To fit waist size (inches) 30 32 34 36 38 In-leg length (cm) 85 85 87 87 88 Imperial size 3.5L 4.5L 5.5L 6.5L 7.5L NZ size 3L 4L 5L 6L 7L 8S 9S 10S 11S 12S 13S 14S BC6719TW StormProcurementUK@storm.com PRODUCT INFORMATION WOMEN’S 3M TAPED LIGHTWEIGHT HI VIS SHIRT 2 Tone Long Sleeve - Hoop Pattern BL6896 Features • 3M 8910 Reflective taped ‘Hoop’ pattern around body • 2 chest pockets with button down flaps and pen division • 2 piece contrast coloured structured collar • Bust darts, waist darts and side vents for a more flattering and feminine look • Vertical cotton mesh back ventilation • Underarm cotton mesh ventilation • Panelled front with bust and waist shaping • 2 button hole adjustable full gusset sleeve cuff Fabric • 100% Cotton Preshrunk Drill 155gsm • 100% Cotton Open Mesh Knit 125gsm Size • 8 - 24 Yellow/Navy (TT01) Orange/Navy (TT02) Wider double vertical cotton mesh back cooling vents with bar tacks at opening ends Waist shaping 2 piece structured contrast collar with collar stay stitched into each point of top collar with new improved light weight woven interfacing Pen division Bisley chest patch pockets and flaps Underarm diamond shape cotton mesh cooling vents Double turn centre front opening placket. Clean finish to prevent lint from entering 3M 8910 Retroreflective tape stitched all around body and top sleeves in hoop pattern, finishing at side seam 3M Scotchlite woven label Side vent for extra comfort Contrast lower panel on body and sleeve Shaped curved hem BL6896 StormProcurementUK@storm.com PRODUCT INFORMATION TECHNICAL FAQ’s SIMILAR PRODUCTS What is the body length (CB seam to hem)? 8: 71cm, 10: 72cm, 12: 73cm, 14: 74cm, 16: 75cm, 18: 76cm, 20: 77cm, 22: 78cm, 24: 79cm N LASS What is UPF rating of the fabric on this shirt? • UPF 50+ C ONLY BL6896 _TT32 COMPLIES TO 4602.1:2011 CLASS N: NIGHT USE ONLY BLT6456 WOMEN’S 3M 2T HI VIS DRILL SHIRT LS BL6448T WOMEN’S 3M TAPED 2T INDUSTRIAL COOL VENT SHIRT LS AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOUR • AS/NZS 1906.4:2010: Hi Visibility Material For Safety Garments. THIS GARMENT MEETS THE FLUORESCENT CAPABILITIES AND THE CHROMATICITY READING TO ENSURE THAT THE BRIGHT COLOURS ARE WITHIN THE REQUIRED COLOUR RANGE (EXCLUDES PINK COLOURWAY). RETROREFLECTIVE TAPE ON THIS GARMENT ALSO MEETS THE HIGHER RETROREFLECTIVE PERFORMANCE REQUIRED. • AS/NZS 4602.1:2011: Hi Visibility Safety Garments. Garments For High Risk Application. THIS GARMENT HAS A MINIMUM OF 0.2sqm OF HI VISIBILITY FABRIC ON THE FRONT AND BACK AND RETRO-REFLECTIVE TAPING CONFIGURATION - HOOP PATTERN TO MEET DAY & NIGHT STANDARD PINK COLOURWAY - RETRO-REFLECTIVE TAPE CONFIGURATION HOOP PATTERN MEETS CLASS N STANDARD. • AS/NZS 1020:1995: The Control of Undesirable Static Electricity THIS GARMENT IS 100% COTTON WITH NO METAL ZIPS OR BUTTONS, THEREFORE IT MAY BE USED AS A STATIC CONTROL GARMENT International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldeyhe (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE SHIRTS WOMENS Size 6 8 10 12 14 16 18 20 22 24 26 28 To fit bust size (cm) 80 85 90 95 100 105 110 115 120 125 130 135 To fit waist size (cm) 60 65 70 75 80 85 90 95 100 105 110 115 To fit hip size (cm) 87 92 97 102 107 112 117 122 127 132 137 142 BL6896 StormProcurementUK@storm.com PRODUCT INFORMATION PRODUCT INFORMATION WOMEN’S 3M TAPED LIGHTWEIGHT HI VIS SHIRT 2 Tone Long Sleeve - Hoop Pattern BL6896 Features • 3M 8910 Reflective taped ‘Hoop’ pattern around body • 2 chest pockets with button down flaps and pen division • 2 piece contrast coloured structured collar • Bust darts, waist darts and side vents for a more flattering and feminine look • Vertical cotton mesh back ventilation • Underarm cotton mesh ventilation • Panelled front with bust and waist shaping • 2 buttonhole full gusset sleeve cuff Fabric • 100% Cotton Preshrunk Drill 155gsm • 100% Cotton Open Mesh Knit 125gsm Pink /Navy (TT32) Size • 8 - 24 Wider double vertical cotton mesh back cooling vents with bar tacks at opening ends Waist shaping 2 piece structured contrast collar with collar stay stitched into each point of top collar with new improved light weight woven interfacing Pen division Bisley chest patch pockets and flaps Underarm diamond shape cotton mesh cooling vents Double turn centre front opening placket. Clean finish to prevent lint from entering 3M 8910 Retroreflective tape stitched all around body and top sleeves in hoop pattern, finishing at side seam 3M Scotchlite woven label Side vent for extra comfort Contrast lower panel on body and sleeve Shaped curved hem BL6896 StormProcurementUK@storm.com PRODUCT INFORMATION TECHNICAL FAQ’s SIMILAR PRODUCTS What is the body length (CB neck to hem)? • 8: 71cm, 10: 72cm, 12: 73cm, 14: 74cm, 16: 75cm, 18: 76cm, 20: 77cm, 22: 78cm, 24: 79cm • What is UPF rating of the fabric on this shirt? • ALL COLOURS: UPF 50+ BLT6456 WOMEN’S 3M 2T HI VIS DRILL SHIRT LS BL6448T WOMEN’S 3M TAPED 2T INDUSTRIAL COOL VENT SHIRT LS BL6267 WOMEN’S 2T HI VIS DRILL SHIRT AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOUR • AS/NZS 1906.4:2010: Hi Visibility Material For Safety Garments. RETROREFLECTIVE TAPE ON THIS GARMENT ALSO MEETS THE HIGHER RETROREFLECTIVE PERFORMANCE REQUIRED. • AS/NZS 4602.1:2011: Hi Visibility Safety Garments. Garments For High Risk Application. PINK COLOURWAY - RETRO-REFLECTIVE TAPE CONFIGURATION HOOP PATTERN MEETS CLASS N STANDARD. • AS/NZS 1020:1995: The Control of Undesirable Static Electricity THIS GARMENT IS 100% COTTON WITH NO METAL ZIPS OR BUTTONS, THEREFORE IT MAY BE USED AS A STATIC CONTROL GARMENT International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldeyhe (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE SHIRTS WOMENS Size 6 8 10 12 14 16 18 20 22 24 26 28 To fit bust size (cm) 80 85 90 95 100 105 110 115 120 125 130 135 To fit waist size (cm) 60 65 70 75 80 85 90 95 100 105 110 115 To fit hip size (cm) 87 92 97 102 107 112 117 122 127 132 137 142 BL6896 StormProcurementUK@storm.com PRODUCT INFORMATION 3M TAPED ORIGINAL WORK PANT Single Pleat Front BP6007T Features • 3M Reflective taped ‘Hoop’ pattern around legs • Mobile phone pocket on right side • 7 reinforced belt loops • Single front pleats • Twin back hip patch pockets • 2 angled side pockets • Coin pocket in waistband • YKK branded zip front fly Fabric • 100% Cotton Preshrunk Drill 310gsm Size • Regular: 77-112 • Stout: 87-132 • Long: 74-94 Twin back hip patch pockets Navy (BPCT) Orange (BVEO) Coin pocket along waistband seam Waistband extension Front slanted side pockets YKK branded nylon zipper 6mm twin needle top stitching along side for seam reinforcement 3M branded retroreflective tape stitched all around leg in hoop pattern, finishing at side seam. 3M Scotchlite woven label attached on left leg 6mm twin needle top stitching along back and front rise for seam reinforcement- BP6007T FOR ORANGE ONLY StormProcurementUK@storm.com PRODUCT INFORMATION TECHNICAL FAQ’s SIMILAR PRODUCTS What is the inleg length on Regular (crotch to finish hem)? • 77: 80cm, 82: 82cm, 87: 82cm, 92: 84cm, 97: 84cm, 102: 86cm, 107: 86cm, 112: 88cm What is the inleg length on Stout (crotch to finish hem)? • 87: 78cm, 92: 80cm, 97: 80cm, 102: 82cm, 107: 82cm,112: 84cm,117: 84cm, 122: 84cm, 127: 84cm,132: 84cm What is the inleg length on Long (crotch to finish hem)? • 74: 85cm, 79: 85cm, 84: 87cm, 89: 87cm, 94: 88cm BPC6007T 3M TAPED 8 PKT CARGO PANT BPC6007 8 PKT CARGO PANT BP6007 ORIGINAL DRILL PANT AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOURS • AS/NZS 1906.4:2010: Hi Visibility Material For Safety Garments. ORANGE COLOURWAY MEETS THE FLUORESCENT CAPABILITIES AND THE CHROMATICITY READING TO ENSURE THAT THE BRIGHT COLOURS ARE WITHIN THE REQUIRED COLOUR RANGE. RETROREFLECTIVE TAPE ON THIS GARMENT ALSO MEETS THE HIGHER RETROREFLECTIVE PERFORMANCE REQUIRED. • AS/NZS 1020:1995: The Control of Undesirable Static Electricity THIS GARMENT IS 100% COTTON WITH NO METAL ZIPS OR BUTTONS, THEREFORE IT MAY BE USED AS A STATIC CONTROL GARMENT International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldeyhe (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE PANTS: Regular MENS To fit waist size (cm) 77 82 87 92 97 102 107 112 To fit waist size (inches) 30 32 34 36 38 40 42 44 Inner leg length (cm) 80 82 82 84 84 86 86 88 PANTS: Stout MENS To fit waist size (cm) 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 34 36 38 40 42 44 46 48 50 52 Inner leg length (cm) 78 80 80 82 82 84 84 84 84 84 PANTS: Long MENS To fit waist size (cm) 74 79 84 89 94 To fit waist size (inches) 29 31 33 35 37 Inner leg length (cm) 85 85 87 87 88 BP6007T StormProcurementUK@storm.com PRODUCT INFORMATION INDUSTRIAL WORK DENIM JEAN Straight Cut BP6053 Features • Modern lower waist straight leg fit jean • Garment washed for comfort • Classic 5 pocket styling, including modern easy access angled front pockets • Bisley ‘B’ signature embroidery on back hip patch pocket • Rivets at stress points on front pocket only • Contrast thick top stitching thread • Twin and triple needle top stitching for extra durability Fabric • 100% Cotton Indigo Denim 490gsm (14.5oz) • Designed to withstand industrial laundering at 75ºc Size • Regular: 77-112 • Stout: 92-132 • Long: 74-94 Dark Denim (BDAD) Twin back hip patch pocket with Bisley ‘B’ signature embroidery Bisley waistband patch label Triple needle top stitching for extra strength and durability 7 belt loops with twin needle top stitching Triple needle top stitching for extra strength and durability along front and back rise Angled front pockets with twin needle top stitching for for easy access Wider coin pocket for easy access YKK branded metal zipper Double turn hem with 15mm top stitch BP6053 StormProcurementUK@storm.com PRODUCT INFORMATION TECHNICAL FAQ’s SIMILAR PRODUCTS What is the in leg length on Regular (crotch to finish hem)? • 77: 80cm, 82: 82cm, 87: 84cm, 92: 84cm, 97: 85cm, 102: 85cm, 107: 86cm, 112: 88cm What is the in leg length on Stout (crotch to finish hem)? • 87: 78cm, 92: 79cm, 97: 80cm, 102: 82cm, 107: 82cm,112: 84cm,117: 84cm, 122: 84cm, 127: 84cm,132: 84cm What is the in leg length on Long (crotch to finish hem)? • 74: 85cm, 79: 85cm, 84: 87cm, 89: 87cm, 94: 88cm BP6050 ROUGH RIDER DENIM JEAN BP6053T 3M TAPED INDUSTRIAL WORK DENIM JEAN BP6712 R.R DENIM STRETCH JEAN AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldeyhe (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOURS PANTS: Regular MENS To fit waist size (cm) 77 82 87 92 97 102 107 112 To fit waist size (inches) 30 32 34 36 38 40 42 44 Inner leg length (cm) 80 82 82 84 84 86 86 88 PANTS: Stout MENS To fit waist size (cm) 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 34 36 38 40 42 44 46 48 50 52 Inner leg length (cm) 78 80 80 82 82 84 84 84 84 84 PANTS: Long MENS To fit waist size (cm) 74 79 84 89 94 To fit waist size (inches) 29 31 33 35 37 Inner leg length (cm) 85 85 87 87 88 BP6053 StormProcurementUK@storm.com PRODUCT INFORMATION COTTON DRILL CARGO PANT Flat Front BPC6006 Fabric Features • 100% Cotton Preshrunk Drill 310gsm • 14x7 heavy duty drill fabric • Modern fit with internal reinforced front rise Size • Reinforced stitching at front and back rise • Regular: 77-112 • YKK branded zip front fly • Stout: 87-132 • Two side angled pockets • Two side cargo pockets with touch tape flap closure • Two back welt pockets with touch tape flap closure • LHS leg with one welt pocket with touch tape closure • 7 reinforced belt loops • Reinforced stitching all around Navy (BPCT) Bottle (BGRG) Two back hip welt pockets with touch tape flap closure Front slanted side pockets YKK branded nylon zipper Internal reinforced crotch at front rise Left leg with welt pocket Side cargo pockets with touch tape pocket flaps Twin needle top stitching along side for seams reinforcement Triple needle top stitching along back and front rise for seam reinforcement BPC6006 StormProcurementUK@storm.com PRODUCT INFORMATION TECHNICAL FAQ’s SIMILAR PRODUCT What is the inleg length on Regular (crotch to finish hem)? • 77: 80cm, 82: 82cm, 87: 82cm, 92: 84cm, 97: 84cm, 102: 86cm, 107: 86cm, 112: 88cm What is the inleg length on Stout (crotch to finish hem)? • 87: 78cm, 92: 80cm, 97: 80cm, 102: 82cm, 107: 82cm,112: 84cm,117: 84cm, 122: 84cm, 127: 84cm,132: 84cm BP6006 COTTON DRILL FLAT FRONT WORK PANT BPC6006T 3M TAPED CARGO DRILL PANT BPC6431 COOL VENTED LW CARGO PANT AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOURS • AS/NZS 1020:1995: The Control of Undesirable Static Electricity THIS GARMENT IS 100% COTTON WITH NO METAL ZIPS OR BUTTONS, THEREFORE IT MAY BE USED AS A STATIC CONTROL GARMENT International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldeyhe (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE PANTS: Regular MENS To fit waist size (cm) 77 82 87 92 97 102 107 112 To fit waist size (inches) 30 32 34 36 38 40 42 44 Inner leg length (cm) 80 82 82 84 84 86 86 88 PANTS: Stout MENS To fit waist size (cm) 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 34 36 38 40 42 44 46 48 50 52 Inner leg length (cm) 78 80 80 82 82 84 84 84 84 84 BPC6006 StormProcurementUK@storm.com PRODUCT INFORMATION COOL VENTED LIGHT WEIGHT CARGO PANT Flat Front with Contrast Stitching BPC6431 Features • Modern look with contrast charcoal stitching • Shaped waistband for better fit and to prevent gaping at back • Easy access mitred angled front pockets • 11 multi- functional pockets including mirrored cargo pockets • Back yoke and diamond shape crotch gusset ventilation • All stress points reinforced with heavy duty bartacks • 7 reinforced wider and stronger belt loops Fabric • 100% Cotton Preshrunk Drill 190gsm • 100% Polyester Mesh Size • Regular: 77-112 • Stout: 87-132 Navy (BPCT) 7 wider and stronger belt loops Back Yoke with Air vents for the extra comfort Bisley signature single mitred twin back hip patch pockets with utility loop Shaped waistband for better fit and to prevent gaping at back Easy access angled front slanted pockets Coin pocket YKK branded nylon zipper Contrast Yellow bartacks to show reinforcement in key areas Twin multi cargo pockets *First main large pouch *Second smaller pocket with pen partition *Third pocket is a bellowed mobile phone pocket Diamond crotch gusset with ventilation Contrast grograin tape on pocket flaps for quick easier grip access and closure BPC6431 StormProcurementUK@storm.com PRODUCT INFORMATION TECHNICAL FAQ’s SIMILAR PRODUCTS What is the inleg length on Regular (crotch to finish hem)? • 77: 80cm, 82: 82cm, 87: 82cm, 92: 84cm, 97: 84cm, 102: 86cm, 107: 86cm, 112: 88cm What is the inleg length on Stout (crotch to finish hem)? • 87: 78cm, 92: 80cm, 97: 80cm, 102: 82cm, 107: 82cm,112: 84cm,117: 84cm, 122: 84cm, 127: 84cm,132: 84cm BPC6007 8 PKT CARGO PANT BPC6431T 3M TAPED VENTED LW CARGO PANT BPC6006 COTTON DRILL CARGO PANT AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOURS • AS/NZS 1020:1995: The Control of Undesirable Static Electricity THIS GARMENT IS 100% COTTON WITH NO METAL ZIPS OR BUTTONS, THEREFORE IT MAY BE USED AS A STATIC CONTROL GARMENT International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE PANTS: Regular MENS To fit waist size (cm) 77 82 87 92 97 102 107 112 To fit waist size (inches) 30 32 34 36 38 40 42 44 Inner leg length (cm) 80 82 82 84 84 86 86 88 PANTS: Stout MENS To fit waist size (cm) 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 34 36 38 40 42 44 46 48 50 52 Inner leg length (cm) 78 80 80 82 82 84 84 84 84 84 StormProcurementUK@storm.com PRODUCT INFORMATION WOMEN’S INDUSTRIAL WORK DENIM JEAN Subtle Boot Leg Cut BPL6053 Features • Modern lower waist with subtle boot leg • Garment washed for comfort • Classic 5 pocket styling, including modern easy access angled front pockets • Bisley ‘B’ signature embroidery on back hip patch pocket • Rivets at stress points on front pockets • YKK branded metal zip front fly • Contrast thick top stitching thread • Twin and triple needle top stitching for extra seams support Fabric • 100% Cotton Indigo Denim 490gsm (14.5oz) • Designed to withstand industrial laundering at 75ºc Size • 8 - 24 Dark Denim (BDAD) Twin back hip patch pocket with Bisley ‘B’ signature embroidery Triple needle top stitching for extra strength and durability 7 belt loops with twin needle top stitching Angled front pockets with twin needle top stitching for for easy access YKK branded metal zipper Wider coin pocket for easy access Triple needle top stitching for extra support along front and back rise Double turn hem BPL6053 StormProcurementUK@storm.com PRODUCT INFORMATION SIMILAR PRODUCTS TECHNICAL FAQ’s What is the in leg length (crotch to finish hem)? • 8: 78cm, 10: 80cm, 12: 80cm, 14: 80cm, 16: 80cm, 18: 82cm, 20: 82cm,, 22: 82cm, 24: 82cm BPL6007T WOMENS 3M TAPED DRILL WORK PANT BPL6712 WOMENS RR DENIM STRETCH JEAN BPL6053T WOMEN’S 3M TAPED INDUSTRIAL BOOTLEG DENIM JEAN AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOURS International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldeyhe (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE ALL STYLES WOMENS Size 6 8 10 12 14 16 18 20 22 24 To fit bust size (cm) 80 85 90 95 100 105 110 115 120 125 To fit natural waist size (cm) 60 65 70 75 80 85 90 95 100 105 To fit lower waist size (cm) 67 72 77 82 87 92 97 102 107 112 To fit hip size (cm) 87 92 97 102 107 112 117 122 127 132 Inner leg length (cm) 78 80 80 82 82 84 84 86 86 86 BPL6053 StormProcurementUK@storm.com PRODUCT INFORMATION 3M TAPED COOL LIGHT WEIGHT SHIRT 2 Tone Long Sleeve w/ Gusset Cuff BS6896 Fabric Features • 100% Cotton Preshrunk Drill 155gsm • 3M Reflective taped ‘Hoop’ pattern around • 100% Cotton Mesh Knit 125gsm body • Vertical cotton mesh back ventilation Size • Underarm cotton mesh ventilation • S - 6XL • 2 chest pockets with button down flaps • Left pocket with pen divsion • Contrast coloured collar and lower panel on body and sleeves • 2 button adjustable full gusset sleeve cuff Yellow/Navy Orange/Navy Yellow/Bottle (TT02) (TT01) (TT03) Double layered back yoke panel 2 vertical cotton mesh back vents 2 piece structured contrast collar with collar stay stitched into each point of top collar Pen division Two front chest patch pockets with button down flaps Underarm cooling vents Single turned center front opening 3M Scotchlite woven label 6mm twin-needle top stitch at side seams and under sleeve 3M branded retroreflective tape stitched all around body and top sleeves in hoop pattern, finishing at side seam Contrast coloured lower panel on body and sleeves Gusset cuff Shaped curved hem BS6896 StormProcurementUK@storm.com PRODUCT INFORMATION TECHNICAL FAQ’s SIMILAR PRODUCTS What is the neck circumference (button to button hole)? XS: 36.5cm, S: 38.5cm,M: 40.5cm, L: 42.5cm, XL: 44.5cm, 2XL: 46.5cm, 3XL: 48.5cm, 4XL: 50.5cm, 5XL: 52.5cm, 6XL: 54.5cm SN CLAS What is the sleeve length (sleeve head to cuff)? XS: 62.5cm, S: 63cm, M: 64cm, L: 65cm, XL: 65.5cm, 2XL: 66cm, 3XL: 67cm, 4XL: 68cm, 5XL: 68m, 6XL: 68cm What is UPF rating of the fabric on this shirt? • ALL COLOURS: UPF 50+ ONLY BS6896 _TT32 3M TAPED 2T HI VIS COOL L/W SHIRT COMPLIES TO 4602.1:2011 CLASS N: NIGHT USE ONLY BS6895 2 TONE HI VIS COOL LW DRILL SHIRT LS BT6456 3M TAPED 2 TONE HI VIS DRILL SHIRT LS AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1996: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOUR • AS/NZS 1906.4:2010: Hi Visibility Material For Safety Garments. THIS GARMENT MEETS THE FLUORESCENT CAPABILITIES AND THE CHROMATICITY READING TO ENSURE THAT THE BRIGHT COLOURS ARE WITHIN THE REQUIRED COLOUR RANGE (EXCLUDES PINK COLOURWAY). RETROREFLECTIVE TAPE ON THIS GARMENT ALSO MEETS THE HIGHER RETROREFLECTIVE PERFORMANCE REQUIRED. • AS/NZS 4602.1:2011: Hi Visibility Safety Garments. Garments For High Risk Application. THIS GARMENT HAS A MINIMUM OF 0.2sqm OF HI VISIBILITY FABRIC ON THE FRONT AND BACK AND RETRO-REFLECTIVE TAPING CONFIGURATION - HOOP PATTERN TO MEET DAY & NIGHT STANDARD PINK COLOURWAY - RETRO-REFLECTIVE TAPE CONFIGURATION HOOP PATTERN MEETS CLASS N STANDARD. • AS/NZS 1020:1995: The Control of Undesirable Static Electricity THIS GARMENT IS 100% COTTON WITH NO METAL ZIPS OR BUTTONS, THEREFORE IT MAY BE USED AS A STATIC CONTROL GARMENT International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldeyhe (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE SHIRTS MENS Size XS S M L XL 2XL 3XL 4XL 5XL 6XL To fit neck size (cm) 36 37/38 39/40 41/42 43/44 46 48 50 52 54 To fit chest size (cm) 87 92 97 102 107 112 117 122 127 132 To fit chest size (inches) 34 36 38 40 42 44 46 48 50 52 BS6896 StormProcurementUK@storm.com PRODUCT INFORMATION 3M TAPED COOL LIGHT WEIGHT SHIRT 2 Tone Long Sleeve w/ Gusset Cuff BS6896 Fabric Features • 100% Cotton Preshrunk Drill 155gsm • 3M Reflective taped ‘Hoop’ pattern around • 100% Cotton Mesh Knit 125gsm body • Vertical cotton mesh back ventilation Size • Underarm cotton mesh ventilation • S - 6XL • 2 chest pockets with button down flaps • Left pocket with pen divsion • Contrast coloured collar and lower panel on body and sleeves • 2 button adjustable full gusset sleeve cuff Pink /Navy (TT32) Double layered back yoke panel 2 vertical cotton mesh back vents 2 piece structured contrast collar with collar stay stitched into each point of top collar Pen division Two front chest patch pockets with button down flaps Underarm cooling vents Single turned center front opening 3M Scotchlite woven label 6mm twin-needle top stitch at side seams and under sleeve 3M branded retroreflective tape stitched all around body and top sleeves in hoop pattern, finishing at side seams Contrast coloured lower panel on body and sleeves Gusset cuff Shaped curved hem BS6896 StormProcurementUK@storm.com PRODUCT INFORMATION TECHNICAL FAQ’s SIMILAR PRODUCTS What is the neck circumference (button to button hole)? XS: 36.5cm, S: 38.5cm,M: 40.5cm, L: 42.5cm, XL: 44.5cm, 2XL: 46.5cm, 3XL: 48.5cm, 4XL: 50.5cm, 5XL: 52.5cm, 6XL: 54.5cm What is the sleeve length (sleeve head to cuff)? XS: 62.5cm, S: 63cm, M: 64cm, L: 65cm, XL: 65.5cm, 2XL: 66cm, 3XL: 67cm, 4XL: 68cm, 5XL: 68m, 6XL: 68cm BS6696T 3M TAPED 2 TONE COOL HI VIS LW SHIRT LS What is UPF rating of the fabric on this shirt? • ALL COLOURS: UPF 50+ BS6895 2 TONE HI VIS COOL LW DRILL SHIRT LS BT6456 3M TAPED 2 TONE HI VIS DRILL SHIRT LS AUSTRALIAN & INTERNATIONAL STANDARDS Australian/ New Zealand Standards • AS/NZS 2621:1998: Textiles - Guide to the Selection of Correct Care Labelling Instructions from AS/NZS 1957 BISLEY WORKWEAR GARMENTS USE THE CORRECT CARE LABELLING SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2392:1999: Textiles - Labelling of Clothing, Household Textiles and Furnishings BISLEY WORKWEAR GARMENTS HAVE THE CORRECT CARE LABELLING PLACEMENT AND DETAILS • AS/NZS 1957:1998: Textiles - Care Labelling BISLEY WORKWEAR GARMENTS ARE PROVIDED WITH CARE INSTRUCTIONS SUITED TO THEIR TYPE AND FABRICATION • AS/NZS 2622:1996: Textile Products Fibre Content Labelling BISLEY WORKWEAR GARMENTS ACCURATELY LIST THE FABRIC FIBRE CONTENT • AS/NZS 4399:1999: Sun Protective Clothing - Evaluation and Classification THIS GARMENT HAS A SUN PROTECTION RATING OF UPF 50+ FOR ALL COLOURS • AS/NZS 1906.4:2010: Hi Visibility Material For Safety Garments. RETROREFLECTIVE TAPE ON THIS GARMENT ALSO MEETS THE HIGHER RETROREFLECTIVE PERFORMANCE REQUIRED. • AS/NZS 1020:1995: The Control of Undesirable Static Electricity THIS GARMENT IS 100% COTTON WITH NO METAL ZIPS OR BUTTONS, THEREFORE IT MAY BE USED AS A STATIC CONTROL GARMENT • AS/NZS 4602.1:2011: Hi Visibility Safety Garments. Garments For High Risk Application. RETRO-REFLECTIVE TAPE CONFIGURATION HOOP PATTERN MEETS CLASS N STANDARD. International Standards • ASTM D5489-07: Standard Guide for Care Symbols for Care Instructions on Textile Products BISLEY WORKWEAR GARMENTS COMPLY WITH USA STANDARDS FOR CARE LABEL SYMBOLS AND CONTENT DESCRIPTIONS • ISO 14184-1: Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldeyhe (Water Extraction Method) BISLEY WORKWEAR GARMENTS ARE FREE FROM FORMALDEHYDE SHIRTS MENS Size XS S M L XL 2XL 3XL 4XL 5XL 6XL To fit neck size (cm) 36 37/38 39/40 41/42 43/44 46 48 50 52 54 To fit chest size (cm) 87 92 97 102 107 112 117 122 127 132 To fit chest size (inches) 34 36 38 40 42 44 46 48 50 52 BS6896 StormProcurementUK@storm.com SHORTS MENS 77 82 87 92 97 102 107 112 117 122 127 132 To fit waist size (cm) 77 82 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 30 32 34 36 38 40 42 44 46 48 50 52 MEN’S MEASUREMENTS WOMEN’S MEASUREMENTS 1. 1. 2. PANTS MENS Size REGULAR 77R 82R 87R 92R 97R 102R 107R 112R 117R 3. To fit waist size (cm) 77 82 87 92 97 102 107 112 117 4. To fit waist size (inches) 30 32 34 36 38 40 42 44 46 In-leg length (cm) 80 82 82 84 84 86 86 88 88 Size STOUT 87S 92S 97S 102S 107S 112S 117S 122S 127S 132S To fit waist size (cm) 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 34 36 38 40 42 44 46 48 50 52 82 82 84 84 84 84 84 78 80 80 Size LONG 74L 79L 84L 89L 94L To fit waist size (cm) 74 79 84 89 94 To fit waist size (inches) 29 31 33 35 37 In-leg length (cm) 85 85 87 87 88 In-leg length (cm) NECK: Measure around the neck where the top of the shirt collar would sit. CHEST: Standing naturally, measure around the fullest part of the chest and shoulder, under the arms with your arms at resting position. WAIST: Measure over undergarments at the natural waistline (usually approx. 1cm below the navel). IN-LEG: Measure from crotch to floor, with shoes. 2. 3. 4. 5. SIZING & HOW TO MEASURE Size BUST: Measure around the fullest part of the bust and shoulder, under the arms with your arms at resting position. WAIST: Measure over undergarments at the natural waistline (usually approx. 1cm below the navel). LOWER WAIST: Measure over undergarment approx. 4cm below the natural waistline. HIP: Measure over undergarments at hips (usually the widest part and is approx. 25cm below the waistline). IN-LEG: Measure from crotch to floor, with shoes. 1. 2. 1. OVERALLS MENS 3. 2. 3. Sizes REGULAR 77R 82R 87R 92R 97R 102R 107R 112R 117R 122R 127R 132R To fit chest size (cm) 87 92 97 102 107 112 117 122 127 132 137 142 To fit chest size (inches) 34 36 38 40 42 44 46 48 50 52 54 56 To fit waist size (cm) 77 82 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 30 32 34 36 38 40 42 44 46 48 50 52 In-leg length (cm) 80 80 82 82 84 84 86 86 87 87 87 87 Imperial size 3R 4R 5R 6R 7R 8R 9R 10R 11R 11R 11R 11R NZ size 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R Bisley internal size code 3 4 5 6 7 8 9 10 15 16 17 18 Sizes STOUT 87S 92S 97S 102S 107S 112S 117S 122S 127S 132S To fit chest size (cm) 97 102 107 112 117 122 127 132 137 142 To fit chest size (inches) 38 40 42 44 46 48 50 52 54 56 To fit waist size (cm) 87 92 97 102 107 112 117 122 127 132 To fit waist size (inches) 34 36 38 40 42 44 46 48 50 52 In-leg length (cm) 78 78 80 80 82 82 83 83 83 83 Size XS S M L XL 2XL 3XL 4XL 5XL 6XL Imperial size 3.25S 4.25S 5.25S 6.25S 7.25S 8.25S 9.25S 10.25S 11.25S 12.25S To fit neck size (cm) 36 37/38 39/40 41/42 43/44 46 48 50 52 54 NZ size 5S 6S 7S 8S 9S 10S 11S 12S 13S 14S To fit chest size (cm) 87 92 97 102 107 112 117 122 127 132 Bisley internal size code 21 22 23 24 25 26 11 12 13 14 To fit chest size (inches) 34 36 38 40 42 44 46 48 50 52 Sizes LONG 74L 79L 84L 89L 94L TRADITIONAL FIT ACTIVE FIT To fit chest size (cm) 87 92 97 102 107 Workwear garments are traditionally bigger in terms of fit compared to fashion or casualwear. Bisley garments are well known for their generous fit, providing greater comfort and movement when you work. Bisley Active Fit shirts are one size smaller than the traditional fit. This is made possible due to the stretch component of the garment. Bisley Active Fit pants/shorts are lower waisted (approx 4cm below true waist), half size bigger in the waist, one size smaller in the thigh, knee and hem opening. The Active Fit is ideal for workers who prefers stretch garments to enhance comfort, flexibility and movement whilst maintaining durability. To fit chest size (inches) 34 36 38 40 42 To fit waist size (cm) 77 82 87 92 97 To fit waist size (inches) 30 32 34 36 38 In-leg length (cm) 85 85 87 87 88 Imperial size 3.5L 4.5L 5.5L 6.5L 7.5L MODERN FIT NZ size 3L 4L 5L 6L 7L Bisley internal size code 32 33 34 35 36 Bisley Modern Fit shirts are half a size smaller than the Traditional Fit. Bisley Modern Fit pants/shorts are lower waisted (approx 4cm below true waist), half size bigger in the waist, half size smaller in the thigh, knee and hem opening. 4. 5. 4. SHIRTS MENS JACKETS/ KNITWEAR MENS Size XS S M L XL 2XL 3XL 4XL 5XL 6XL To fit chest size (cm) 87 92 97 102 107 112 117 122 127 132 To fit chest size (inches) 34 36 38 40 42 44 46 48 50 52 ALL STYLES WOMENS Size 6 8 10 12 14 16 18 20 22 24 To fit bust size (cm) 80 85 90 95 100 105 110 115 120 125 To fit natural waist size (cm) 60 65 70 75 80 85 90 95 100 105 To fit lower waist size (cm) 67 72 77 82 87 92 97 102 107 112 To fit hip size (cm) 87 92 97 102 107 112 117 122 127 132 In-leg length (cm) 78 80 80 82 82 84 84 86 86 86