PMI Pipe* Steel * Supplies - PMI Pipe Steel and Supplies

Transcription

ACREAGE CALCULATIONS
CALCULATING FENCING BY AREA
Use the calculation guide, the diagram or the table to find the length of fencing you will need to
enclose fields of different sizes.
Terminology:
Rod – A linear unit of measure equal to 5.5 yards of 16-1/2 feet.
Acre – a unit of Area equal to 160 square yards, 4,840 square yards, or 43,500 square feet.
Calculation Guide
1 rod =
10 rods =
20 rods =
16-1/2 feet
165 feet
330 feet
1/4 mile =
1/2 mile =
1 mile =
1,320 feet or 80 rods
Acreage Diagram
FENCE CALCULATOR
Find the number of rolls of fence you will need in rods or feet.
Acres
Field Fence Welded Wire
Barb Wire
20 Rod Rolls Fence 100 Ft. 80 Rod Rolls
Rolls
1 Strand
1
3
9
1
2
4
12
1
3
5
15
1
4
5
17
2
5
6
19
2
6
7
21
2
7
7
22
2
8
8
24
2
9
8
25
2
10
8
26
2
11
8
28
2
12
9
29
3
13
10
31
3
14
10
31
3
15
10
33
3
16
11
34
3
17
11
35
3
18
11
36
3
19
1
36
3
20
12
38
3
25
13
38
3
30
14
46
4
35
15
50
4
40
16
53
4
45
17
53
5
50
18
60
5
55
19
62
5
60
20
65
5
65
21
68
6
70
22
70
6
75
22
73
6
80
23
75
6
85
24
77
6
90
24
80
6
95
25
82
7
100
26
86
7
150
31
103
8
200
36
118
9
250
40
132
10
300
44
145
11
350
48
157
12
400
51
167
13
450
54
177
14
475
56
182
14
FENCING MATERIALS
Barb Wire
2 pt. Gaucho® 15.5g High Tensile Barbed Wire
4 pt. Gaucho® 15.5g High Tensile Barbed Wire
2 pt. Cattleman® 14g High Tensile Barbed Wire
4 pt. Cattleman® 14g High Tensile Barbed Wire
2 pt. Range Master 14g Low Carbon Barbed Wire
4 pt. Range Master 14g Low Carbon Barbed Wire
Field & Game Fencing
47” X 330 Ft. X 12.5 Ga. Field Fence - Low Carbon Class I Galvanizing
48” X 330 Ft. X 12.5 Ga. Field Fence - High Tensile Field Fence Class 3 Galv.
49” X 330 Ft. X 12.5 Ga. Field Fence - High Tensile Field Fence Class 3 Galv.
60” X 330 Ft. X 12.5 Ga. Game Fence - High Tensile Game Fence Class 3 Galv.
48” X 100 Ft. X 12.5 Ga. Horse Fence - High Tensile Horse Fence Class 3 Galv.
60” X 100 Ft. X 12.5 Ga. Horse Fence - High Tensile Horse Fence Class 3 Galv.
72” X 100 & 200Ft. X 12.5 Ga. Horse Fence - High Tensile Horse Fence Class 3 Galv.
All horse fence is a 2” x 4” spacing - All sheep & goat is a 4” x 4” spacing
Welded Wire Panels
Hog Panel
Hog Panel
4 Gauge .225” Diameter, Galvanized, Graduated Squares
34” x 16’ft. 42 lbs.
Cattle Panel
Cattle Panel
6 Gauge .192" Diameter, Galvanized, 4" x 4" Squares
36” x 20 ft.
27 lbs.
48” x 20 ft.
36 lbs.
60” x 20 ft.
72” x 20 ft
96” x 20 ft.
53 lbs.
74 lbs.
95lbs.
Cattle/ Combo Panel
50” x 16 ft.
48 lbs.
Welded Wire Panels
Horse Panel
Horse Panel
Combination
Panel
48” x 20 ft.
71 lbs.
60” x 20 ft.
89 lbs.
72” x 20 ft.
107 lbs.
Combination Stock Panel
4 Gauge .225" Diameter, Galvanized, Graduated Squares
52” x 16 ft.
61 lbs.
T-Post & Fence Stays
Domestic T-Post
6 ft. 1.25# Painted
6 ft. 1.33# Painted
6-1/2 ft. 1.25# Painted
6-1/2 ft. 1.33# Painted
6-1/2 ft. 1.33# Galvanized
10 ft. 1.33# Painted
10 ft. 1.33# Galvanized
10 ft. 1.50# Painted
7 ft. 1.33# Painted
8 ft. 1.33# Painted
10.4 ft. 1.33# Painted
10.4 ft. 1.50# Painted
10.4 ft. 1.33# Galvanized
10.4 ft. 1.50# Galvanized
Import T-Post
6 ft. 1.25# Painted
6 ft. 1.33# Painted
6-1/2 ft. 1.25# Painted
6-1/2 ft. 1.33# Painted
Fence Stays
48” Open End Fence Stays
Ranger Gates
6 BAR GALVANIZED PASTURE TUBE GATES
1 5/8” 19 gauge GATORSHIELD Galvanized Tubing.
6 bars 52” tall with two 5/8”x 6” screw hooks and adjustable hinges.
Bars are saddled and fitted before welding for added strength. Double
strapped vertical bracing.
*SPECIAL ORDERS WELCOME!
PASTURE MASTER GATES
1-5/8 18 GA. GALVANIZED TUBING
4X4 WIRE MESH GATE
ALL GATES ARE DESIGNED WITH GALVANIZED AMERICAN MADE TUBING. ALL GATES ARE 50 INCHES TALL.
GATE HARDWARE INCLUDED. ALL GATE’S VERTICAL STAYS ARE 1-12, 1-14, 1-16. ALL VERTICAL &
HORIZONTAL BARS ARE SADDLE NOTCHED FOR DURABILITY. ALL GATES ARE 5 INCHES SHORTER THAN
ADVERTISED LENGTH FOR HINGE PLACEMENT. ALL GATES COME WITH A 6 GAUGE 4X4 MESH PANEL.
CALFMASTER GATES
5 BAR GALVANIZED PASTURE TUBE GATES
1 5/8” 19 gauge Galvanized Tubing.
5 bars 48” tall with two 5/8”x 6” screw hooks and adjustable hinges.
Bars are saddled and fitted before welding for added strength.
Double strapped vertical bracing.
RANGER GATES
3 BAR GALVANIZED WIRE PANEL TUBE GATES
1 5/8” 19 gauge GATORSHIELD galvanized tubing.
3 bar 50” tall with 36” tall wire panel 4” x 4” openings.
Includes two 5/8” x 6” screw hooks and adjustable hinges.
Vertical braces and bars are saddled and fitted before welding for added strength.
DEER GATES
1 7/8” 16GA. DEERPROOF GATES
1 7/8” 16 gauge galvanized tubing.
Includes three 3/4” x 12” bolt hooks included.
Bars are saddled and fitted before welding for added strength.
Built with 4”x 4” Galvanized wire panel front.
Top corners can be rounded or squared.
FENCING TOOLS & SUPPLIES
HEAVY DUTY T-POST DRIVER
Heavy duty T-Post Driver - designed to help get your
T-Posts in the ground quickly.
2-3/4” diameter x 24” overall length.
MULTI-CRIMP TOOL
The high-quality Multi-Crimp Tool has a wire cutter for cutting High Tensile wire, a slot for stripping heavy duty lead-in cable for
electric fence, and two crimping slots, one for 12 1/2 gauge fencing, and one for larger gauge wire. This versatile tool is designed to
splice any wire product available today. The Multi-Crimp Tool has a two-year warranty.
FENCE CRIMPING SLEEVES – 12-1/2 GA. - 10 GA.
The JM-593 long sleeve will hold to 1,500lbs so the wire join is stronger than the wire. They come packaged in a convenient screw
top plastic container. 50 per jar.
BARBED WIRE CRIMPING SLEEVES – 16 GA. - 12-1/2 GA.
Use this sleeve to join barbed wire. These must be crimped with the JM-592 crimp tool.
They come packaged in a convenient screw top plastic container. 100 per jar
Gate Latches, Hinges & Accessories
Square Ball Bearing Gate Hinges
5” Hinge - 600# max
7” Hinge - 900# max
Barrel Gate Hinges
5” - 600# max
7” - 900# max
Bullet Hinge
Solid Steel - Weld Hinges
7”, 3 3/16”, 4 ¾”
2” to 6”
4”Flag Double Wrap Hinge
6” Slam Action Gate Latch
Great for BBQ Pits!
For Right & Left Gate Orientations
Galvanized Steel Spring Latch
Bar Gate Latch
Great for wood or metal applications. Pin system
allows for the latch to be locked in the open position.
Works with left or right gate orientation.
10” x 6”
17” x 6”
Lockable 2 Way Gate Latch
Fits 1-1/4” – 2-3/8” Pipe or 1-1/2” – 2” Sq. Tubing. Easy one hand
operation from both sides. Can be padlocked for extra security.
3/4” x 12” Spring Gate Latch
Galvanized gate latch with a full 1-3/4”movement.
Spring loaded to keep the gate secure yet easy to open.
Easily welded in place.
Lockable Bar Gate Latch
5” & 8”
1/2” Galv. Spring Gate Latch
Galv. Threaded J-Bolt
3/4” X 12” w/ bolts
1/2” X 4-1/2” w/ bolts
5/8” X 4-1/2” w/ bolts
3/4” X 6” Galv. Lag Bolt
3/4” Gate Striker
Plate
Rigging/Cargo
Clevis Hooks
Forged Steel-Quenched and Tempered Grab hooks, Grade
G70 Transport. D.O.T compliant. Sizes of Clevis Hooks:
30 Proof Sq Pail of Chain
Lashing Rings – Weld-on
Welding Helmets
Auto-Darkening Welding Helmet
Adjustable shade 9-13. 1.1 lbs. 4 Per box
Cable Clips
Ratchet Tie-Down-Straps
Flat Hooks
2” x 27’Break strength:10,000 lbs.
3,333 lbs. working load limit
5.70 lbs. 10 per box.
Spring Handle
Zinc 4.75”-3/8” opening (25 per box)
Zinc 6”- ½” Opening (20 per box)
BBQ Pit Thermometers
Red, White and Blue Zones with black dial.
Nuts and washers included for mounting.
2-1/2” stem. (4’’ does not include nuts or washers)
Fabrication & Welding Accessories
Square Cast Iron Post Caps
Weld-On Caps – 16 ga. Light Weight
1”1/4 – Up To 6”
1-5/8”
1-7/8”
2-3/8”
2-7/8”
3-1/2”
4”
4-1/2”
5-1/2”
6-5/8”
Weld Caps - Standard Wall
1/2” thru 12” Dia. Caps
90, 45 Degree Weld Elbows & Weld Tee
Standard Wall Sizes 3/4” thru 24”
Pipe Saddle Templates
AVAILABLE SIZES
1-7/8”, 2-3/8”, 2-1/2”, 3-1/2”, 4-1/2”, & 6”
Saddle Pattern + 45, 60, & 90 Degree Angle Templates
Chipping Hammer
9” Wood Handle Wire Brush
Hatchet & Chisel Style
Cutting Torch Strikers
Single Flint &Triple Flint Striker
Soapstone Holders & Refills
Flat & Round
Abrasive Cutting & Grinding Wheels
4.5" X .045 GRINDER CUTTING DISC
7" X 3/32" CIRCULAR SAW CUTTING DISC
14" X 3/32" CHOP SAW BLADE
4.5" X 1/4" GRINDING DISC
4.5" X 7/8" ALUMINUM OXIDE FLAP DISC
Welding Rods: Uniweld by Hobart
6011
1/8” X 10#
1/8” X 50#
3/32” X 10#
5/32” X 10#
6013
1/8” X 10#
1/8” X 50#
3/32” X 10#
5/32” X 10#
Standard Wire Tip Cleaners
7018
1/8” X 10#
1/8” X 50#
3/32” X 10#
5/32” X 10#
Welding Gloves
14” Gloves & 16” Gloves
With Reinforced Thumb
Paint & Supplies
HAMMERITE RUST CAP:
Hammerite Rust Cap paint is a self-priming, fast dry, rust preventive
coating designed to provide both interior and exterior long-last metal
protection. It provides a decorative finish that resists corrosion and the
weather. Hammerite Rust Cap paint dries to the touch in 30 minutes.
Glassguard protection-as the coating dries, millions of heathardened
glass flakes interlock with special resins, forming a super-tough barrier
that seals out moisture to prevent rusting. Paint right over rust. It is a
long-lasting coating that can be applied directly over firm, rusty
surfaces.
RUST-OLEUM PROTECTIVE ENAMEL:
Rust-Oleum topcoats provide excellent moisture resistance when applied
directly to metal, with or without priming. They provide a smooth, rich
protective finish for metal. For maximum rust prevention, apply a RustOleum Primer first.
RUST-OLEUM PRIMERS:
Red Oxide & Gray Primers inhibit rust on clean, lightly rusted, or painted
metals. Rust-Oleum primers penetrate through rusted surfaces to bare
metal, driving out trapped air and moisture that causes rust. Eliminates
the need to sand surfaces to bare metal. May also be used as an
intermediate coat between Rusty Metal and a top coating for the
ultimate in rust prevention.
RUS-KIL – RUST INHIBITING ENAMEL:
Great outdoor finish for Machinery, Pipe, Structural Steel, &
Prepared Wood. Rus-Kill protects steel products from
corrosion in Outdoor, Mild Industrial, & Marine applications.
Paint & Supplies
CRC COLD GALVANIZING SPRAY
A Zinc rich primer that provides the Ultimate Rust
Preventative Coating on clean, lightly rusted, or
pre-galvanized metals. Protects metals like Hot
Dipped Galvanizing.
RUST-OLEUM HIGH PERFORMANCE SPRAY
Rust-Oleum Professional High Performance Enamel Spray
provides superior coverage and hiding. Apply to metal, wood,
concrete and masonry in heavy-duty and commercial
environments. Retains color against the elements.
KRYLON HIGH HEAT – BBQ PAINT
Withstands temperatures up to 1200°F intermittently; up to
600°F continuously Durable finish with Thermo-Guard
protection. Perfect for BBQ grills and wood-burning stoves
Ospho Rust Inhibitor
Ospho kills rust and creates a hard
surface that is ready for priming.
1 qt.
1 gallon
Pipe, Structural Steel
Valves & Fittings
Supplies
WE STOCK
STANDARD PIPE * API LINE PIPE * OCTG * STRUCTURAL PIPE * USED PIPE * VALVES * FITTINGS
PLATE * SHEET * ROUND BAR * SQUARE BAR * FLATS * CHANNEL * BEAM * ANGLE * PURLIN
SQUARE & RECTANGULAR TUBE * EXPANDED * REBAR * CULVERT * T-POSTS * HANDI CRETE * PAINT
FENCING * WIRE GATES * CATTLE PANEL * HOG PANEL * WELDING SUPPLIES * GLOVES * STRAPS
GLUE * PVC * STAINLESS * GALVANIZED * BRASS * COPPER
**FEED & HAY AVAILABLE AT OUR HYE LOCATION**
SIGN POLE FABRICATION
WE DELIVER
PMI Pipe* Steel * Supplies
6385 US HWY 87E, SAN ANTONIO, TEXAS 78222 - OFFICE: 210-223-PIPE (7473)
FAX: 210-223-7477 – WWW.PIPEMOVERS.COM

PMI Pipe* Steel * Supplies - PMI Pipe Steel and Supplies

Transcription

Similar documents

SECTION 4 - Trivantage