Dynablocs - Ace Glass, Inc.

Reaction Blocks for Circular-top
Hot Plate/Stirrers
■■ New
sizes — Easy to use
■■ Complete
■■ Radley’s
systems
and ACE brand
■■ Economical
and efficient
ACE DynaBloc anodized aluminum blocks are ideal for heating and mixing solutions in a
variety of vials and small round bottom flasks.
ACE DynaBloc heating blocks use a universal base plate (13698-05), which fits easily on top
of any circular-top hotplate stirrers such as the popular IKA Model RCT or Thermolyne RT.
The ACE DynaBloc system is low-cost, and its efficient heating blocks utilize a wide range
of standard laboratory glassware. They can be used for stirring and/or heating multiple
samples in applications such as digestion, extraction, distillation, and synthesis. The system
is easy to set up, allows switching from vials to flasks in seconds, and is also easy to
disassemble for cleaning. The configuration of the vial/flask holes allows for optimum heating
and mixing in every well.
Use ACE DynaBloc heating blocks with your standard labware and hotplates for highly
economical and efficient heating/stirring.
13698 DynaBloc Base Plate
13698-05
Anodized aluminum base plate for use with 13698, 13689 and 13696 DynaBloc heads and
fits the standard circular 135 mm diameter stirrer/hotplate top. The base has a hole in the
side to accommodate a standard thermocouple sensor to measure the heat at the base.
I.D., mm
135
13698 DynaBloc
O.D., mm
164
Order Code
13698-05
Cylindrical, for Vials & Tubes
Anodized aluminum blocks for use with 13698-05 Base Plate. Pre-drilled openings for
standard-size glass vials and tubes including small dram vials, chromatography vials,
scintillation vials, EPA vials, VOC vials, and standard test tubes. The blocks can be
separated from the base plate for easy cleaning and handling. All blocks have a predrilled
hole to accommodate sensor probe and have another hole to accommodate the T-handle
extractor for easy removal of the block, even when hot. Order base plate, block and
T-handle separately.
13698-12
Number
of Holes
For Vessel Size
18
20 mL Vial
18
40 mL Vial
10 mL Reaction V-Vial® or
18
25x100mm tubes
28
4 Dram/16 mL Vial
1mL Reaction V-Vial® or
54
12 x 75mm tubes
40
16 mm O.D. tubes
28
5 mL Reaction V-Vial®
36
2 Dram/8 mL Vial
52
1 Dram/4 mL Vial
54
0.5 Dram or 1.2 mL Chrom. Vial
Hole Size,
mm
28 x 27.6
28 x 50.0
Order
Code
13698-12
13698-13
26 x 50.0
13698-14
22 x 35.6
13698-20
13 x 27.6
13698-21
17 x 50.0
22 x 35.6
17 x 27.6
15 x 27.6
13 x 27.6
13698-30
13698-37
13698-38
13698-41
13698-49
ACCESSORY
13698-09
T-handle Extractor (fits all ACE blocks)
13698-09
13699 DynaBloc* Cylindrical, for Flasks
Anodized aluminum blocks are machined to accommodate small round bottom flasks and
small Erlenmeyer flasks. The blocks fit the universal base plate, and have one hole to
accommodate the extension rods and the T-handle extractor which assists moving
the blocks even while hot. The blocks also have a hole for a temperature sensor
13699-04
probe. Short support rod (31cm long) is for supporting flasks in the flask blocks; long
(61 cm) rod supports condensers and other taller glass apparatus. Clamp devices
are necessary to stabilize glassware while in blocks. Order base plate, block, clamp
device, and support rod separately.
# of
Holes
3
3
4
5
For Vessel Size
125 mL Erlenmeyer Flask
250 or 300 mL Round Bottom Flask
100 mL Round Bottom Flask
50 mL Round Bottom Flask
Well Dia.,
mm
69.0
62.2
60.3
48.5
Block
Height
27.6mm
27.6mm
27.6mm
27.6mm
Order
Code
13699-03
13699-04
13699-06
13699-09
13696 DynaBloc* Segmented
New heating/mixing blocks with even more versatility. These aluminum blocks
have three segments within each block that have different size holes per each
segment to accommodate a broad range of a flask or vials at the same time.
Chose different size vials, tubes or a flask to run simultaneously. Block fits
standard base plate and blocks fit all standard size 135mm diameter round top
hotplate/stirrers. Order base plate, block, clamp device, and support rod
separately.
# of
Holes
12
12
 8
12
 4
 8
10
 1
 4
For Vessel Size
0.5 Dram Vials
1 Dram Vials
2 Dram Vials
1 Dram Vials
4 Dram Vials
2 Dram Vials
16 mm Tubes
50 mL Round Bottom Flask
40 mL Vials
Block
Height
30.8mm
Order
Code
13696-03
30.8mm
13696-07
53mm
13696-11
13696-11
*All these items use 13698-05 Base Plate.
ACCESSORIES for 13696, 13698 and 13699
Order Code
Flask/Condenser Clamp Device
13699-63
Stainless Steel Short Support Rod (31 cm) 13699-40
Stainless Steel Long Support Rod (61 cm) 13699-44
1-800-223-4524 n www.aceglass.com
Instatherm/Heat Blocks ★
Complete Instatherm/Block System
9600-20
A combination of two great ideas, why not the best and most accurate
way of heating combined with the new DynaBloc technology.
Instatherm baths now available with newly engineered aluminum
Dynablocs that fit into the bath body and hold popular size vials and
tubes. Just use your existing 1,200 mL bath and block for precise heating
or place the entire unit on any magnetic stirrer to combine stirring with
Instatherm® heat. Use existing equipment or buy a complete system.
9600-20 Complete System
(contains all items listed below)
Order Code
9600-20
Description
Order Code
Aluminum Block for 16mm Tubes
Economy Temperature Controller, 120v
with “J” Type Thermocouple
Troemner Magnetic Stirrer (7" x 7")
12" Aluminum Rod
1,200 mL Instatherm® bath, w/clip & cord
13697-16
12125-32
13470-16
11166-37
 9601-46
Individual Instatherm® Blocks*
Individual blocks for use with Instatherm® baths only. Block diameter (141mm)
is for use in the 9601-16, 1,200mL Instatherm® bath.
Description
For 22, 2 Dr./8mL or 17 mm O.D. vials
For 14, 4 Dr./16mL or 22mm O.D. vials
For 24, 16mm O.D. tubes
For 8, 40mL or 28mm O.D. vials
Block Height
Order Code
30.8mm
38.8mm
50mm
50mm
13697-04
13697-08
13697-16
13697-40
ACCESSORY
T-Handle Extractor (fits all ACE blocks)
13698-09
*These blocks require NO base plate.
13698-09
13697-04
ACE has several brands and
styles
of
stirrer/hotplates
available. See our website for
more details.
ACE Instatherm Oil Bath Controller Kits ★
For Glass Vessels
Replaces open-coil immersion heaters banned by most safety departments.
9601-335
Bath Kit Complete ★
Economy
Consists of one 9601-16 bath plus one
12125-14 Economy Temperature Controller,
one 9601-30 clip, and one 12110-17 Type “J”
Thermocouple Temperature Sensor and cord.
Order Code
9601-335
9601-352
Bath Kit Complete ★
with Removable Cord
Consists of one each 9601-12, 9601-14 and
9601-16 baths, three 9601-30 clips, three
9698-16 cords, plus one 12127-30 Temperature
Controller with one 12110-17 Type “J”
Thermocouple Temperature Sensor.
Order Code
9601-352
Complete
Bath Kits
for your
convenience
See our website or request our
Instatherm® brochure for more
information.
Bath also available with permanent chord:
Order Code
9602-364
Quick Selection Guide
Vessels
DynaBlocs
 6976-07
Stir Bars
6897-04 
125mL
6887-25 
69 mm diameter
3 Holes
X-shaped
PTFE
19mm
 13654-34
 6887-24
300mL
13560-01 
PTFE with
Pivot Ring
 13699-03
125mL
250mL
13560-01 
PTFE with
Pivot Ring
 13699-04
62.2 mm diameter
3 Holes
X-shaped
PTFE
19mm
 13655-29
 6887-21
100mL
13560-01 
PTFE with
Pivot Ring
 13699-06
60.3 mm diameter
4 Holes
X-shaped
PTFE
19mm
 13655-29
 6887-20
50mL
13560-01 
PTFE with
Pivot Ring
 13699-09
48.5 mm diameter
5 Holes
X-shaped
PTFE
19mm
 13655-25
 8780-29
20mL
Clear Vial
8781-12 
20mL
Amber Vial
 8780-30
40mL
Clear Vial
8781-35 
40mL
Amber Vial
 8782-10
8463-23 
10mL
25mm x
Reaction
150mm tubes
Vial
4 dram/
16mL Clear Vial
1mL
Reaction
Vial
 13666-08
 13698-13
 13666-08
PTFE “Fin” Plug
15.9mm
28 mm I.D. x 27.6mm Hgt.,
18 Holes
PTFE “Fin” Plug
15.9mm
28 mm I.D. x 50mm Hgt.,
18 Holes
 13698-14
26 mm I.D. x 50mm Hgt.,
18 Holes
 13668-02
PTFE “V” Vane
8456-09 
12mm x
75mm tube
 13666-10
 8463-09
16mm x 100mm tube
8463-11
16mm x 125mm tube
8463-13
16mm x 150mm tube
PTFE “Fin” Plug
19.1mm
22 mm I.D. x 35.6mm Hgt.,
28 Holes
 13698-21
13 mm I.D. x 27.6mm Hgt.,
54 Holes
 13698-30
17 mm I.D. x 50mm Hgt.,
40 Holes
13666-08 
PTFE “Fin” Plug
15.9mm
 13698-20
 8780-08
 8782-01
 13698-12
 13668-03
PTFE “V” Vane
13666-04 
PTFE “Fin” Plug
7.9mm
 13666-04
PTFE “Fin” Plug
7.9mm
Quick Selection Guide
Vessels
DynaBlocs
 8782-05
 13698-37
5mL Reaction Vial
22 mm I.D. x 35.6mm Hgt.,
28 Holes
 8780-04
2 Dr./8mL
Clear Vial
8781-08 
 8780-02
1 Dr./4mL
Clear Vial
8781-06 
 8780-01
0.5 Dr./2mL
Clear Vial
8780-01, 8781-02, 8456-09
0.5 Dr./2mL Clear/Amber Vials, 12x75mm tubes
Segmented (3 each) Blocks
13696-03
$225.00
8780-02, 8781-06
1.0 Dr./4mL Clear/Amber Vials
8780-04, 8781-08, 8463-09
2.0 Dr./8mL Clear/Amber Vials, 16mm Tubes
8780-02, 8781-06
1.0 Dr./4mL Clear/Amber Vials
13696-07
$225.00
8780-04, 8781-08, 8463-09
2.0 Dr./8mL Clear/Amber Vials, 16mm Tubes
8780-08
4.0 Dr./16mL Clear/Amber Vials
6887-20
50mL Round Bottom Flask
8463-09
16x100mm tubes
8780-30, 8781-35
40mL Clear/Amber Vials
 13666-06
13 mm I.D. x 27.6mm Hgt.,
54 Holes
0.5 Dr./2mL
Amber Vial
Vessels
 13698-41
 13698-49
8781-02 
13696-11
$225.00
PTFE “V” Vane
 13666-06
15 mm I.D. x 27.6mm Hgt.,
52 Holes
1 Dr./4mL
Amber Vial
 13668-02
 13698-38
17 mm I.D. x 27.6mm Hgt.,
36 Holes
2 Dr./8mL
Amber Vial
Stir Bars
13mm I.D. x 27.6mm Hgt.,
12 Holes
PTFE “Fin” Plug
12.7mm
PTFE “Fin” Plug
12.7mm
 13658-12
PTFE Micro Bar
Stir Bars
 13658-12 PTFE Micro Bar
16mm I.D. x 27.6mm Hgt.,
12 Holes
 13666-06 PTFE “Fin” Plug
17mm I.D. x 27.6mm Hgt.,
8 Holes
 13666-04 or 13666-06 PTFE “Fin” Plug
15mm I.D. x 27.6mm Hgt.,
12 Holes
 13666-06 PTFE “Fin” Plug
17 mm I.D. x 27.6mm Hgt.,
8 Holes
 13666-04 or 13666-06 PTFE “Fin” Plug
22 mm I.D. x 27.6mm Hgt.,
4 Holes
 13666-10 PTFE “Fin” Plug
48.5mm well dia. x 50mm
Hgt., 1 Hole
 13654-34 or 13560-01
17mm I.D. x 50mm Hgt.,
10 Holes
 13666-04 PTFE “Fin” Plug
28 mm I.D. x 50mm Hgt.,
4 Holes
 13666-08 PTFE “Fin” Plug
0115
P.O. Box 688 • Vineland, NJ 08362-0688 • 856-692-3333 • Fax: 856-692-8919
TOLL-FREE: 1-800-223-4524 • FAX: 1-800-543-6752
www.aceglass.com
email: sales@aceglass.com
Net Prices and specifications subject to change without notice.