bREATHInG vALvE

Transcription

bREATHInG vALvE

30924E01
SPARE PART LIST
DIVATOR
© 2011 Interspiro AB, Sweden.This publication contains or refers to proprietary information which is protected by
copyright. All rights are reserved. Interspiro®, DIVATOR Lite® and Spiromatic® are registered trademarks belonging
to Interspiro.
This publication may not be copied, photocopied, reproduced, translated, or converted to any electronic or machinereadable form in whole or in part without prior written approval from Interspiro.
Read before use
1.
Only holders of a valid INTERSPIRO Service Certificate may carry out
service and repairs on INTERSPIRO breathing equipment. Unauthorized
service may result in malfunction and users relying thereon could
sustain severe respiratory injury or death.
2. When using the spare part list always refer to the equipment's SERVICE
MANUAL in regard to procedure and handling of the spare parts assembly
and function.
3. Changes to this document – necessitated by typographical errors,
inaccuracies of current information or improvements and changes of
equipment – may be done at any time and without prior notice.
4.
The NOTES column is used for short descriptions of the spare part,
for example dimensions or number of included sub components. For
example "10 x 336 100 437" indicates that this is a multi-pack that consists
of 10 pieces of the single component 336 100 437.
5. The service kits contain replacement items used for preventive
maintenance.
6. Always refer to www.interspiro.com for product or document updates
and for service bulletins.
Contents
service kits....................................................................................................... 7
service kits (cont.) .......................................................................................... 8
Face Mask Grey NATURAL RUBBER.................................................................... 9
Face Mask Black NATURAL RUBBER................................................................ 10
Face Mask Black Silicone............................................................................. 11
Face Mask Yellow Silicone........................................................................... 12
DIVATOR HATCH.................................................................................................. 13
Breathing Valve without Safety Pressure, Black................................... 14
Breathing Valve without Safety Pressure, Black (cont.)........................... 15
Breathing Valve with Safety Pressure, Black.......................................... 16
Breathing Valve with Safety Pressure, Black (cont.).............................. 17
Breathing Valve "OCTOPUS" Without Safety Pressure, BLACK................ 18
Breathing Valve "OCTOPUS" Without Safety Pressure, BLACK (cont.)..... 19
Breathing Valve Without Safety Pressure, Grey..................................... 20
Breathing Valve Without Safety Pressure, Grey (cont.)............................. 21
Breathing Valve with Safety Pressure, Grey........................................... 22
Breathing Valve with Safety Pressure, Grey (cont.)................................ 23
MKII Regulator with warning...................................................................... 24
MKII Regulator with warning (cont.)........................................................... 25
MKII WARNING DEVICE...................................................................................... 26
MKII regulator................................................................................................ 27
MKII Regulator without warning................................................................ 28
MKIII Regulator.............................................................................................. 29
MKiiI Hoses...................................................................................................... 30
Pressure Gauge ASSemblY............................................................................ 31
MKIII Regulator UNIT...................................................................................... 32
MKIII Plug-in pressure Regulator.............................................................. 33
DIVATOR BCW - Wing type buoyancy compensator.................................... 34
BCW - accessories......................................................................................... 35
BCW - exhaust valve assembly .................................................................... 36
Harness - single & cylinder pack............................................................... 37
Harness PRO.................................................................................................... 38
Cylinder Steel - Single 316.......................................................................... 39
Cylinder Steel - Pack 324............................................................................. 40
Cylinder Steel - Pack 326............................................................................. 41
Cylinder Composite - Pack 323.4................................................................. 42
Cylinder Composite - Pack 326.7................................................................. 43
two TYPES of cylinder VALVE........................................................................ 44
cylinder valve................................................................................................ 45
cylinder valve & easy-fill valve ............................................................... 46
cylinder Pack Weights................................................................................. 47
Weight system................................................................................................ 48
DP1 Surface panel......................................................................................... 49
DP1 valve block.............................................................................................. 50
DP1 Whistle insert........................................................................................ 51
DP1 Shuttle insert......................................................................................... 52
DP1 Hose & Relieving loop........................................................................... 53
DP1 Connection manifold............................................................................. 54
DP1 Venting insert......................................................................................... 55
DP1 Regulator, P+......................................................................................... 56
DP1 Accessories............................................................................................. 57
DP1 t-piece...................................................................................................... 58
TOOLS................................................................................................................ 59
service kits
All service kits and service parts listed below shall be replaced during service.
EVERY YEAR
FULL FACE MASK
460 190 404
97 220-01
Service kit for 1 Full face mask
Service kit for 1 DIVATOR Hatch
See page 9 - 12
See page 13
BREATHING VALVE
336 190 226
O-ring, 10 pack for 10 Breathing valves
See page 14, 16, 20 & 22
Service kit MKII - Annual service
See page 27
Service kit MKIII - Annual service See page 33
DP1 - SURFACE PANEL
460 190 701
Service kit for 1 DIVATOR DP1
See page 49
DIVATOR BCW
460 200 525
336 190 272
346 190 053
Service kit for 1 BCW Inflator
O-ring, 10 pack for cylinder connection
Protective band, 10 pack
See page 36
See page 35
See page 35
Service kit for 1 Breathing valve, NP
Service kit for 1 Breathing valve, SP
Service kit for 1 Octopus Breathing valve
Service kit for 1 Octopus Breathing valve
without lever
See page 15, 19 & 21
See page 17 & 23
See page 19
See page 19
REGULATOR - MKII
460 200 507
REGULATOR - MKIII
460 190 717
EVERY 6 YEARS
BREATHING VALVE
460 190 902
460 190 904
460 200 510
460 200 512
WARNING DEVICE - MKII
460 190 908
Service kit for 1 Warning device
See page 26
REGULATOR - MKII
460 190 906
460 190 910
460 190 756
460 190 912
Service kit for 1 DIVATOR Swivel Service kit for 1 Regulator 1-port swivel
Service kit for 1 MKII 4-port swivel
Service kit for 1 Extra air manifold, E-10
See page 25 & 28
See page 27
See page 27
See page 28 (not sold on the US market)
REGULATOR - MKIII
460 200 518
460 190 912
Service kit for MKIII Regulator unit Service kit for 1 Extra air manifold, E-10
See page 33
See page 28 (not sold on the US market)
service kits (cont.)
CYLINDER VALVE TYPE I
460 190 390
Service kit for 1 cylinder valve
See page 45
CYLINDER VALVE TYPE II
460 190 686 Service kit for 1 cylinder valve
See page 46
EASY-FILL VALVE
460 190 732
Service kit for 1 Easy-Fill valve
See page 46
DP1 SURFACE PANEL
460 190 702
Service kit for 1 compl. DP1 surface panel See page 49
DP1 REGULATOR P+
460 190 703
Service kit for 1 Regulator P+
See page 56
Special Kits
DIVATOR Mask & Breathing valve
460 200 503
Service Part Kit, for component level maintenance
Incl. selected rubber parts
(listed in document 30508).
Face Mask Grey NATURAL RUBBER
13
16
(see page 13)
20
1
2
14
3
15
7
17
12
19
21
6
5
18
4
9
9
8
8
11
10
# Spare part
Order #
• DIVATOR mask, grey NR
1 Inner mask assy. grey NR
Incl. single items of #2 & 3
Notes
# Spare part
Order #
336 190 852
15 Spacer
336 190 554 10 x 336 100 890
460 190 543
16 Visor MKII
336 190 850
17 Head harness, grey NR
460 190 375
2 Valve seat assy. grey
460 190 550 2 x 331 100 791
2 x 336 900 021
18 Pressure equalizer
336 190 373
Incl. two items of #5 & one item of 19a & 21
19aPressure equalizing pad
19bPressure equalizing pad 3 Non-return valve disc
336 190 264 10 x 331 100 791
4 Screw
336 190 246 10 x 941 136 224
5 Screw
336 190 489 10 x 941 136 226
6 Retaining plate
460 190 398
7 Mask body assy. grey NR
460 190 545 Incl. #12
8 Circlip
336 190 255 10 x 944 607 106
9 Screw
460 190 300 10 x 336 100 029
10 Cover assembly, grey
336 190 017
Incl. single item of #7 & two items of #8-9
11 O-ring
336 190 222 5 x 944 610 221
12 Buckle assy.
460 190 541 5 x 336 900 017
13 Visor frame kit MKII, grey
Incl. two items of #14 & 15
460 190 548
14 Screw
336 190 409 10 x 336 900 138
88 542-51
460 190 513
Notes
With four slots.
(Not shown)
For OTS mic.
20 Visor with DIVATOR Hatch
96 962-01
21 Holder
460 190 510 for # 19
# SERVICE KITorder #
Service kit for 1 DIVATOR face mask
- 1 single item of each of #11
- 2 single items of each of #3 460 190 404
Face Mask Black NATURAL RUBBER
13
16
(see page 13)
20
1
2
14
3
15
7
17
12
19
21
6
5
18
4
9
9
8
8
11
10
# Spare part
Order #
• DIVATOR mask, black NR
97 771-01
Notes
# Spare part
Order #
Notes
15 Spacer
336 190 554 10 x 336 100 890
1 Inner mask assy. black silicone 460 190 542
16 Visor MKII
336 190 850
17 Head harness, black NR
460 190 457
2 Valve seat assy. black
460 190 549 2 x 331 100 791
2 x 336 101 136
336 190 373
3 Non-return valve disc
19bPressure equalizing pad 336 190 264 10 x 331 100 791
4 Screw
336 190 246 10 x 941 136 224
5 Screw
336 190 489 10 x 941 136 226
6 Retaining plate
460 190 398
7 Mask body assy. black NR
97 820-51
8 Circlip
336 190 255 10 x 944 607 106
9 Screw
460 190 300 10 x 336 100 029
Incl. #12
10 Cover assembly, black
460 190 555
11 O-ring
336 190 222 5 x 944 610 221
12 Buckle assy.
460 190 541 5 x 336 900 017
13 Visor frame kit MKII, black
460 190 547
14 Screw
336 190 409 10 x 336 900 138
88 542-51
460 190 513
With four slots.
(Not shown)
For OTS mic.
96 962-01
21 Holder
460 190 510 for # 19
Service kit for 1 DIVATOR face mask460 190 404
- 2 single items of each of #3
10
Face Mask Black Silicone
13
16
(see page 13)
20
1
2
14
3
15
7
17
12
19
21
6
5
18
4
9
9
8
8
11
10
# Spare part
Order #
Notes
#spare partorder #notes
• DIVATOR mask, black silicone336 101 161
15 Spacer
336 190 554 10 x 336 100 890
1 Inner mask assy. black silicone 460 190 542
Incl. two single item of #2 & 3
16 Visor MKII
336 190 850
17 Head harness, black NR
460 190 457
2 Valve seat assy. black
460 190 549 2 x 331 100 791
2 x 336 101 136
336 190 373
336 190 264 10 x 331 100 791
4 Screw
336 190 246 10 x 941 136 224
19bPressure equalizing pad 5 Screw
336 190 489 10 x 941 136 226
6 Retaining plate
460 190 398
7 Mask body assy. black silicone 460 190 544 Incl. #12
8 Circlip
336 190 255 10 x 944 607 106
9 Screw
460 190 300 10 x 336 100 029
10 Cover assembly, black
460 190 555
11 O-ring
336 190 222 5 x 944 610 221
12 Buckle assy.
460 190 541 5 x 336 900 017
13 Visor frame kit MKII, black
460 190 547
14 Screw
336 190 409 10 x 336 900 138
88 542-51
460 190 513
With four slots.
(Not shown)
For OTS mic.
96 962-01
21 Holder
460 190 510 for # 19
Service kit for 1 DIVATOR face mask
- 2 single items of each of #3 11
4 60 190 404
Face Mask Yellow Silicone
13
16
(see page 13)
20
1
2
14
3
15
7
17
12
19
21
6
5
18
4
9
9
8
8
11
10
• DIVATOR mask, yellow silicone 336 190 901
15 Spacer
336 190 554 10 x 336 100 890
1 Inner mask assy. yellow silicone 336 190 909
16 Visor MKII
336 190 850
2 Valve seat assy. grey
460 190 550 2 x 331 100 791
2 x 336 900 021
17 Head harness, grey NR
460 190 375
336 190 373
88 542-51
460 190 513
336 190 264 10 x 331 100 791
4 Screw
336 190 246 10 x 941 136 224
19bPressure equalizing pad 5 Screw
336 190 489 10 x 941 136 226
For OTS mic.
6 Retaining plate
460 190 398
96 962-01
21 Holder
460 190 510 for # 19
7 Mask body assy. yellow silicone 336 190 908 Incl. #12
8 Circlip
336 190 255 10 x 944 607 106
9 Screw
460 190 300 10 x 336 100 029
10 Cover assembly, grey
336 190 017
11 O-ring
336 190 222 5 x 944 610 221
12 Buckle assy.
460 190 541 5 x 336 900 017
13 Visor frame kit MKII, grey
460 190 548
14 Screw
336 190 409 10 x 336 900 138
With four slots.
(Not shown)
ervice kit for 1 DIVATOR face mask
S
- 2 single items of each of #3 12
460 190 404
DIVATOR HATCH
6
5
Old version
1
13
8
2
12
11
3
10
4
9
New version
7
• DIVATOR Hatch assy.
-
Sold as Visor with DIVATOR Hatch 96 962-01
6 Valve disc
97 203-51
Single pack of item #6 # Service Kitorder #notes
Service kit Hatch, 1 pack
97 220-01
Incl. single item of # 7, 9, 11, 12 and two items of #10.
Item # 6 not included.
Stem & Screw Kit
Repair kit incl. single of item #3 & 5
30 903-51
13
Breathing Valve without Safety Pressure, Black
2
11
9
1 (s
ee p
age
15)
19
10
17
3
12
16
18
13
7
4
5 6
8
• Breathing valve (w/o SP)
336 101 150 for face mask
11 Nut, black
460 190 516 5 x 336 101 140
97 199-01
1 Exhalation unit, w/o SP
336 101 155
12 Balancing diaphragm
13 Valve cone assy.
460 190 409 5 x 331 100 641
336 190 064
2 Valve housing, black w/o SP
Incl. single items of #9 - 11 & 19
336 101 156
14 -
with mouth piece
15 -
3 Counter pressure assy. w/o SP460 190 588
16 Valve insert sub assy. w/o SP 97 083-51
Incl. single items of #3, 12 & 13
4 Connection nipple
96 341-52
17 Mouth piece
460 190 505
5 O-ring
336 190 227 10 x 331 900 064
18 Mouth piece assy.
336 190 353 Incl. #17
6 O-ring, green
99 486-51
19 Sealing plug
460 190 511 5 x 336 100 509
7 Retaining ring
346 190 198 10 x 336 100 777
8 Valve insert assy. w/o SP
Incl. single items of #3-7, 12 & 13
460 190 558
10 x 99 486-01 9 Non-return valve assy.
460 190 559
10 O-ring
336 190 226 10 x 336 900 008
Only used with face mask
14
Breathing Valve without Safety Pressure, Black (cont.)
16
39
36
37
38
41
40
42
43
12
13
44
34
21
22
23
24
25
26 27
28 29 33
31 32
20
35
1
30
20 Locking ring, black
460 190 515 5 x 336 101 139
38 Sealing sleeve
346 190 246 5 x 336 100 019
21 Shield ring
346 190 197 5 x 336 800 184
39 Centre spindle
460 190 406
40 Adjusting nut
346 190 247 5 x 331 102 020
Incl. single of #40
22 Cover with purge button, black 460 190 518
Incl single item of #21 & 34
41 Sealing spring w/o SP
460 190 501 5 x 336 100 438
23 Guide disc
460 190 721
42 Pin
336 190 258 10 x 336 100 046
24 Sealing spring
460 190 500 5 x 333 100 056
43 Lifting spindle 460 190 408
25 Sealing disc
460 190 393 5 x 336 100 005
336 190 284
26 Exhalation diaphragm
30 005-51
44 Sealing piston
Incl. single item of #12, 13 & 43
27 Securing ring
460 190 413 10 x 336 100 008
28 Diaphragm ring
460 190 394
# SERVICE KIT
Service kit for 1 Breathing valve, w/o SP460 190 902
- 1 single item of each of #5, 6, 7, 9, 10, 16 & 35
5 x 30 005-01
29 Guide pin
346 190 194 10 x 336 100 011
30 Diaphragm
460 190 140
31 Diaphragm holder
460 190 395
32 O-ring
336 190 224 5 x 336 900 009
33 Washer
336 190 638 10 x 336 100 437
34 Purge button
336 190 487 5 x 336 100 432
35 Diaphragm assembly
Incl. single items of #25-33
336 190 360
36 Lever assy.
460 190 522
37 Lever support
460 190 504 5 x 336 100 397
15
Order #
Breathing Valve with Safety Pressure, Black
2
11
1 (s
ee p
age
17)
14a
9
10
14b
14c
15
14d
14
16
12
3
13
4
5 6
7
8
336 101 149
11 Nut, black
460 190 516 5 x 336 101 140
1 Exhalation unit, w SP
460 190 552
460 190 409 5 x 331 100 641
2 Valve housing, black w. SP
336 101 158
13 Valve cone assy.
336 190 064
14 Lever assy.
336 190 142 Incl. #15
3 Counter pressure assy. w SP 460 190 589
15 O-ring
336 190 225 10 x 336 900 001
4 Connection nipple
16 Valve insert sub assy. w SP
97 028-51
•
Breathing valve (w. SP)
96 341-51
5 O-ring
336 190 227 10 x 331 900 064
6 O-ring
336 190 228 10 x 336 900 007
7 Retaining ring
346 190 198 10 x 336 100 777
8 Valve insert assy. w SP
336 190 357
9 Non-return valve assy.
460 190 559
10 O-ring
336 190 226 10 x 336 900 008
17 – 19
16
-
Incl. #3, 12 & 13
Breathing Valve with Safety Pressure, Black (cont.)
16
39
36
37
38
41
40
42
43
12
13
44
34
21
22
23
24
25
26 27
28 29 33
31 32
20
35
1
30
460 190 515 5 x 336 101 139
38 Sealing sleeve
346 190 246 5 x 336 100 019
21 Shield ring
346 190 197 5 x 336 800 184
39 Centre spindle
460 190 406 Incl. #40
40 Adjusting nut
346 190 247 5 x 331 102 020
incl single item of #21 & 34
41 Sealing spring w. SP
460 190 509 5 x 336 100 438
23 Guide disc
460 190 412
42 Pin
336 190 258 10 x 336 100 046
24 Sealing spring
460 190 508 5 x 336 100 436
25 Sealing disc
460 190 393 5 x 336 100 005
44 Sealing piston
336 190 284
30 005-51
5 x 30 005-01
27 Securing ring
460 190 413 10 x 336 100 008
28 Diaphragm ring
460 190 394
29 Guide pin
346 190 194 10 x 336 100 011
30 Diaphragm
460 190 140
31 Diaphragm holder
460 190 395
32 O-ring
336 190 224 5 x 336 900 009
33 Washer
336 190 638 10 x 336 100 437
34 Purge button
336 190 487 5 x 336 100 432
336 190 360
36 Lever assy.
460 190 522
37 Lever support
460 190 504 5 x 336 100 397
# SERVICE KIT
order #
Service kit for 1 Breathing valve, SP460 190 904
- 1 single item of each of #5, 6, 7, 9, 10, 14, 16 & 35
17
Breathing Valve "OCTOPUS" Without Safety Pressure, BLACK
2
1 (s
ee p
age
19)
14a
11
9
14b
14c
15
14d
17
14
18
12
3
13
4
7
16
5
6
8
97 199-02
Octopus, w lever
11 Nut, black
460 190 516 5 x 336 101 140
97 199-03
Octopus, w/o lever
460 190 409 5 x 331 100 641
99 484-51
13 Valve cone assy.
336 190 064
2 Valve housing, black w. SP
336 101 158
14 Lever assy.
336 190 142
15 O-ring
336 190 225 10 x 336 900 001
For US market only
Incl. #9, 11, 14 & 15
Incl. single item of #15
3 Counter pressure assy. w/o SP 460 190 588
4 Connection nipple
96 341-52
5 O-ring
336 190 227 10 x 331 900 064
6 O-ring, green
99 486-51
10 x 99 486-01
7 Retaining ring
346 190 198 10 x 336 100 777
460 190 558
460 190 559
17 Mouth piece
460 190 505
336 190 353
10 -
18
Breathing Valve "OCTOPUS" Without Safety Pressure, BLACK
16
36
37
39
38
41
40
42
43
12
13
44
34
21
22
23
24
25
26 27
28 29 33
30
31 32
20
35
1
460 190 515 5 x 336 101 139
39 Centre spindle
460 190 406 Incl. #40
21 Shield ring, yellow
99 485-51
40 Adjusting nut
346 190 247 5 x 331 102 020
5 x 99 485-01
with yellow shield ring, incl single item of #21 & 34
23 Guide disc
460 190 721
24 Sealing spring
460 190 500 5 x 333 100 056
25 Sealing disc
460 190 393 5 x 336 100 005
30 005-51
460 190 501 5 x 336 100 438
336 190 258 10 x 336 100 046
44 Sealing piston
336 190 284
5 x 30 005-01
27 Securing ring
460 190 413 10 x 336 100 008
28 Diaphragm ring
460 190 394
29 Guide pin
346 190 194 10 x 336 100 011
30 Diaphragm
460 190 140
31 Diaphragm holder
460 190 395
32 O-ring
336 190 224 5 x 336 900 009
33 Washer
336 190 638 10 x 336 100 437
34 Purge button
336 190 487 5 x 336 100 432
336 190 360
36 Lever assy.
460 190 522
42 Pin
37 Lever support
460 190 504 5 x 336 100 397
38 Sealing sleeve
346 190 246 5 x 336 100 019
# SERVICE KIT
order #
Service kit for 1 Octopus Breathing valve, 460 200 510
with lever
Service kit for 1 Octopus Breathing valve, 460 200 512
without lever
- 1 single item of each of #5, 6, 7, 9, 16 & 35
19
Breathing Valve Without Safety Pressure, Grey
2
11
9
1 (s
ee p
age
21)
19
10
18
17
3
12
16
13
7
4
5 6
8
336 190 345 for face mask
11 Nut, grey
336 190 347 with mouthpiece
460 190 409 5 x 331 100 641
336 190 406
13 Valve cone assy.
336 190 064
2 Valve housing, grey w/o SP
336 190 408 Incl. #9 - 11
14 -
346 190 201 5 x 331 100 652
3 Counter pressure assy. w/o SP 460 190 588
15 -
4 Connection nipple
96 341-52 Incl. single items of #3, 12 & 13
5 O-ring
336 190 227 10 x 331 900 064
17 Mouth piece
460 190 505
6 O-ring, green
99 486-51
336 190 353 Incl. #17
19 Sealing plug
460 190 511 5 x 460 190 515
10 x 99 486-01
7 Retaining ring
346 190 198 10 x 336 100 777
Incl. single items of #3-7, 13 . & 13
460 190 558
460 190 559
10 O-ring
336 190 226 10 x 336 900 008
20
Breathing Valve Without Safety Pressure, Grey (cont.)
16
36
39
37
38
41
40
42
43
12
13
44
34
21
22
23
25
24
26 27
28 29 33
20 Locking ring, grey
31 32
20
35
1
30
346 190 193 5 x 331 100 664
38 Sealing sleeve
346 190 246 5 x 336 100 019
21 Shield ring346 190 197 5 x 336 800 184
39 Centre spindle
460 190 406 Incl. #40
40 Adjusting nut
346 190 247 5 x 331 102 020
460 190 501 5 x 336 100 438
22 Cover with purge button, grey 96 343-51
Incl single item of #21 & 34
23 Guide disc
460 190 721
24 Sealing spring
460 190 500 5 x 333 100 056
25 Sealing disc
460 190 393 5 x 336 100 005
30 005-51
5 x 30 005-01
27 Securing ring
460 190 413 10 x 336 100 008
28 Diaphragm ring
460 190 394
29 Guide pin
346 190 194 10 x 336 100 011
30 Diaphragm
460 190 140
31 Diaphragm holder
460 190 395
32 O-ring
336 190 224 5 x 336 900 009
33 Washer
336 190 638 10 x 336 100 437
34 Purge button
336 190 487 5 x 336 100 432
336 190 360
36 Lever assy.
460 190 522
37 Lever support
460 190 504 5 x 336 100 397
42 Pin
336 190 258 10 x 336 100 046
44 Sealing piston
336 190 284
# SERVICE KITorder #.
ervice kit for 1 Breathing valve, w/o SP460 190 902
S
21
Breathing Valve with Safety Pressure, Grey
2
11
14a
1 (s
ee p
age
23)
9
10
14b
14c
15
14d
14
16
12
3
13
4
5
6
7
8
• Breathing valve (w. SP)
336 190 354
11 Nut
346 190 201 5 x 331 100 652
1 Exhalation unit w. SP
336 190 356
460 190 409 5 x 331 100 641
2 Valve housing, grey w. SP
336 190 379
13 Valve cone assy.
336 190 064
14 Lever assy.
336 190 142
15 O-ring
336 190 225 10 x 336 900 001
16 Valve insert sub assy. w SP
97 028-51
3 Counter pressure assy. w SP 460 190 589
4 Connection nipple
96 341-51 5 O-ring
336 190 227 10 x 331 900 064
6 O-ring
336 190 228 10 x 336 900 007
7 Retaining ring
346 190 198 10 x 336 100 777
8 Valve insert assy. w SP
336 190 357
460 190 559
10 O-ring
336 190 226 10 x 336 900 008
17 - 19
-
# SERVICE KIT
Service part for 10 breathing valves
- 10 single items of each of #336 900 008
22
Order #
336 190 226
Breathing Valve with Safety Pressure, Grey (cont.)
16
36
39
37
38
41
40
42
43
12
13
44
34
21
22
23
25
24
26 27
28 29 33
20 Locking ring, grey
31 32
20
35
1
30
346 190 193 5 x 331 100 664
38 Sealing sleeve
346 190 246 5 x 336 100 019
21 Shield ring 190 197 5 x 336 800 184
39 Centre spindle
460 190 406 Incl. #40
22 Cover with purge button, grey 96 343-51
40 Adjusting nut
346 190 247 5 x 331 102 020
Incl. single item of #21 & 34
41 Sealing spring w. SP
460 190 509 5 x 336 100 438
23 Guide disc
460 190 412
24 Sealing spring
460 190 508 5 x 336 100 436
25 Sealing disc
460 190 393 5 x 336 100 005
30 005-51
27 Securing ring
460 190 413 10 x 336 100 008
5 x 30 005-01
28 Diaphragm ring
460 190 394
29 Guide pin
346 190 194 10 x 336 100 011
30 Diaphragm
460 190 140
31 Diaphragm holder
460 190 395
32 O-ring
336 190 224 5 x 336 900 009
33 Washer
336 190 638 10 x 336 100 437
34 Purge button
336 190 487 5 x 336 100 432
336 190 360
42 Pin
336 190 258 10 x 336 100 046
44 Sealing piston
336 190 284
ervice kit for 1 Breathing valve, SP460 190 904
S
- 1 single item of each of #5, 6, 7, 9, 10, 14, 16 & 35
36 Lever assy.
460 190 522
37 Lever support
460 190 504 5 x 336 100 397
23
MKII Regulator with warning
1
a
See warning device, page 26
3
4
2
3
5
8
9
7
6
b
4
10
3
8
11
13
7
5
16
12
15
17
18a
18b
15
19
21
1 a Regulator, Psi, RV, SW
99 083-01
Regulator, Psi, RV, SW, HUD 99 083-02
Regulator, Psi, BOV, SW
99 083-03
Regulator, Psi, BOV, SW, HUD 99 083-04
Regulator, Bar, RV, SW
99 083-05
Regulator, Bar, RV, SW, HUD 99 083-06
Regulator, Bar, BOV, SW
99 083-07
Regulator, Bar, SW
99 083-09
Regulator, Psi, SW
99 083-11
Regulator, Psi, SW, HUD
99 083-12
1b Regulator, Bar, RV
Regulator, Bar, BOV
336 190 377
96 727-01
2 O-ring for #4
336 190 235 10 x 944 610 201
3 O-ring for #4 & 8
336 190 221 10 x 944 610 204
4 High pressure hose
336 190 265 0.63 m
15
20
5 Protective cap, G 5/8"
460 190 557 10 x 336 900 327
6 Swivel, 4 port
See page 27
7 O-ring for #8
336 190 311 10 x 944 610 206
8 Low pressure hose
336 190 288 0.57 m
9 O-ring
336 190 228 10 x 336 900 007
10 O-ring for #11
336 190 237 10 x 336 900 099
11 Breathing valve supply hose
460 190 560
12 O-ring for #11
336 190 236 10 x 944 610 205
13 Plug w. O-ring, BSP1/8"
See page 27
14 --15a O-ring for #16 with UNF3/8" 460 190 529 10 x 336 920 009
15b O-ring for #16 with BSP1/8" 460 190 599 10 x 336 900 272
24
MKII Regulator with warning (cont.)
16a
16a
16a
16a
16b
16b
16b
16b
Dry suit inflation hose, UNF 3/8"
Dry suit inflation hose, BSP 1/8" Dry suit inflation hose, BSP 1/8"
Dry suit inflation hose, BSP 1/8"
Dry suit inflation hose, BSP 1/8"
97 474-53
97 474-63
97 474-54
97 474-64
97 474-51
97 474-61
97 474-52
97 474-62
0.75 m with locking ring
0.75 m without locking ring
1 m with locking ring
1 m without locking ring
17 DIVATOR Second Breathing Hose
99 007-51
3/8" UNF, 1.7 m, 70 inch
for 4-port swivel
18a Swivel, BSP 1/8"-BSP1/8"
18b Swivel, BSP 1/8"-UNF3/8"
336 190 348
30 051-01
Incl. #19 & 20
Incl. #19 & 20
19 O-ring for #18
336 190 312
10 x 336 900 105
20 O-ring for #18
336 190 634
10 x 331 900 090
21 BCW inflation hose, UNF3/8"336 291 131
1.14 m
# SERVICE KIT
order #
Service kit for 1 Swivel, BSP1/8"-BSP1/8" & BSP1/8"-NNF3/8" (#18)
- 1 singular item of each of #20
- 2 singular items of each of #19
460 190 906
BOV= Bail-Out Valve
RV = Reserve Valve
SW = Swivel
25
MKII WARNING DEVICE
18
20
22
21
37
23
24
25
23
30
32
2
8
1
3
5
4
9
31
36
26 10
15 16
RV
11 12 13
7 6
17
35
14
BOV
29
BOV= Bail-Out Valve
RV = Reserve Valve
27
34
33
13
38
28
19
22 Screw
336 190 247 10 x 336 900 057
23 O-ring for #24
336 190 235 10 x 944 610 201
460 190 527 0.15 m
25 Retaining clip
460 190 503
26 O-ring for #9
336 190 595 10 x 336 900 165
• Warning device MKII
Incl. #1-29
1 Cap
460 190 421 10 x 336 100 604
2 Split pin
336 190 380 10 x 336 900 104
3 Nut
460 190 441 5 x 336 100 606
4 Handle
460 190 433 5 x 336 100 603
5 Torsion spring
460 190 430 5 x 336 100 605
6 Nipple
460 190 428 5 x 336 100 407
7 O-ring
336 190 381 10 x 336 900 106
8 O-ring
336 190 382 10 x 336 900 103
9 Valve stem
336 190 404 Incl. #8, 10 & 26
10 Valve disc
336 190 383 5 x 336 100 412
11 O-ring
336 190 240 5 x 331 100 562
12 Guide bushing, RV
460 190 439 5 x 336 100 402
13 Spring
460 190 437 5 x 336 100 401
14 Piston, RV
460 190 431 5 x 336 100 400
15 O-ring
336 190 384 10 x 944 610 209
16 Plug
460 190 442 5 x 336 100 403
17 O-ring
336 190 228 10 x 336 900 007
18 Front and back cover
460 190 427
19 Protective cap
336 190 257 3 x 331 100 254
20aPressure gauge, Bar
20bPressure gauge, Psi
21aRubber cover
21bRubber cover
99 265-51
99 265 -52
99 266-53
96 548-51
Incl. #21
Incl. #21
ervice kit for 1 Warning device
S
460 190 908
- 1 single item of each of #2, 4, 5, 7, 8 ,10, 11, 15, 17, 26 & 27
For old pressure gauge
26
27 Cone with O-ring
-
28 Quick coupling
460 190 485 IS
29 Non-return valve
346 190 223 Incl. #27
30 High pressure connection
97 193-51
31 O-ring
336 190 381 10 x 336 900 106
32 Plug 7/16-20 EN250
97 192-51
33 Piston, bail-out valve
96 728
34 HUD warning device
89 100-04
35 O-ring
336 190 238 10 x 944 610 207
36 Gasket set
336 190 159 2 pack
37 Label "Bail Out Regulator"
96 554-51
38 Protective spiral
95 846-53
Incl. #23 & #36
incl. #31
2 pack, 100 mm
MKII regulator
13
12
1
11
2
25
26
27
18
23
22
32
6
14
24 20 19 17 16 15
9
10
7
8
4
6
5
4
28 29
3
31
30
21
36
33 34
32
35
• Pressure regulator
460 190 585
28 Diffusor, Swivel MKII
99 038-51
1 Plug w. O-ring, G1/8"
460 190 418
29 Axis
---
10 x 99 039-01
2 O-ring
336 190 312 10 x 336 900 105
30 O-ring
336 190 237 10 x 336 900 099
3 Cover
460 190 506
31 Swivel house
--460 190 755
4 O-ring
336 190 229 10 x 336 900 041
32 Blank plug with O-ring
5 Diffuser
460 190 564
33 Washer, swivel MKII
99 013-51
10 x 99 013-01
6 Stop ring
460 190 424 5 x 336 100 049
34 Screw, swivel MKII
98 939-51
10 x 98 939-01
7 Piston
460 190 420
35 O-ring for #32
460 190 529 10 x 336 920 009
8 O-ring
336 190 230 10 x 336 900 042
36 Swivel, 4-port
99 014-51
9 Regulating spring
460 190 422 5 x 336 100 422
10 Spring
460 190 484 5 x 336 100 048
11aInlet filter
11bInlet filter
346 190 643 10 x 212 100 014
346 190 644 100 x 212 100 014
12aO-ring
12bO-ring
336 190 272 10 x 331 100 767
460 190 237 100 x 331 100 767
13 Nipple
460 190 382
14 Supporting washer
336 190 637 10 x 336 100 131
15 O-ring
336 190 233 10 x 336 900 045
16 Spring
346 190 028 5 x 336 100 280
17 Seat, regulator
460 190 591 10 x 336 100 126
18 O-ring
336 190 231 10 x 336 900 043
19 Adjusting screw
460 190 425 5 x 336 100 127
20 Sealing plate
336 190 256 25 x 336 100 035
21 Valve seat set
460 190 648 Incl. #14-18
22 Anti freezing cap
460 190 507 6 x 336 100 425
23 Anti freezing cover
460 190 523
24 Clamp, stainless
460 190 526
25 Connection nipple
460 190 383
26 O-ring
336 190 232 10 x 336 900 044
27 Hand wheel connector
460 190 385
# SERVICE parts order #
ervice kit MKII - Annual service
S
- 1 singular item of each of #11, 12 & 22
460 200 507
Service kit for 1 Regulator with 4-port swivel460 190 756
- 1 single item of each of #4, 8, 11, 12, 15, 17,
18, 20 & 22
- 2 single items of each of #14 & 30
Service kit for 1 Regulator single port460 190 910
- 1 single item of each of #4, 8, 11, 12, 15,
17, 18, 20 & 22
27
MKII Regulator without warning
20
21, 22
1
14
11
28
5
25
5
24
18
12
7
19
15
13
10
27
3
4a
26
23
29
12
4b
13
6
8
22d
9
11
1 Regulator MKII, 336 191 075 Incl. #5-7,
Bar, w/o warning 10-12 & 14-26
22aRubber cover
22bRubber cover
22cRubber cover
22d Rubber cover
99 266-51 99 266-52
99 266-54 96 548-51
23 Non return valve complete
346 190 223
2 -- 3 Dry suit inflation hose
See page 24 -25
4 Swivel See page 24 -25
5 Protective cap
336 190 257 3 x 331 100 254
6 Breathing valve supply hose
460 190 560
7 Protective cap, G 5/8"
460 190 557 10 x 336 900 327
8 O-ring for #4
336 190 312 10 x 336 900 105
9 O-ring for #4
336 190 634 10 x 331 900 090
10 O-ring for #6 & 15
336 190 237 10 x 336 900 099
11 O-ring for #6 336 190 236 10 x 944 610 205
12 O-ring x2 for #25
336 190 228 10 x 336 900 007
13aO-ring for #3 UNF3/8"
13bO-ring for #3 BSP1/8"
460 190 529 10 x 336 920 009
460 190 599 10 x 336 900 272
460 190 724 0.75 m
15 Low pressure hose
336 190 898 0.65 m
18 O-ring for #14
336 190 221 10 x 944 610 204
19 O-ring till #15
336 190 311 10 x 944 610 206
20 O-ring
336 190 235 10 x 944 610 201
21aPressure gauge assy, Bar
21bPressure gauge assy, psi
99 265-51
99 265-52
126 mm w/o hole
58 mm for HUD
126 mm w hole
For old pressure gauge
24 O-ring for #26
346 190 069 10 x 944 610 210
25 Extra air manifold, E-10
346 190 040
26 Quick coupling
96 531-51
27 Cone w. O-ring
460 190 369
28 Protective cap strap
88 208-51
29 BC Inflation hose, UNF3/8"
336 291 131 1.15 m
Single pack
ervice kit for 1 Swivel, BSP1/8"-BSP1/8" (#4)460 190 906
S
Service kit for 1 Extra air manifold, E-10 (#25)460 190 912
- 1 single item of each of #24 & 27
28
MKIII Regulator
1
2
5
3
4
7
8
6
9
1a DIVATOR MKIII Reg w Octopus, Bar
1b DIVATOR MKIII Reg w Octopus, Bar
1c DIVATOR MKIII Reg w Octopus, Psi
30 026-01
30 026-03
30 026-07
with BC hose and Dry suit hose 0.75 m
with BC hose and Dry suit hose 1.0 m
without BC and Dry suit hoses
2 Plug-in pressure regulator
See page 33
3 CDR valve handle
See page 32
4 Octopus holder
88 115-51
5 Holder strap with hook
See page 30
6 MKIII regulator manifold
See page 32
7 Anti freezing unit MKIII
See page 32
See page 31
9a Pressure gauge
See page 31
10 Breathing hose
See page 30
11 DIVATOR second breathing hose
See page 30
12 Dry suit inflation hose UNF 3/8"
See page 30
13 BCW inflator hose, UNF 3/8"
See page 30
14 BCW inflator hose, UNF 3/8"
See page 30
29
5 x 88 115-01
MKiiI Hoses
4
Hose length
19
19
1
12
10
4
17
6
20
2
13
21
11
11
5
14
19
19
25
18
26
28
24
27
23
15a
15b/c/d
7
12
Service kit see page 28
3
8a
16
1 Pressure gauge assy. ---
88 139-52
16
8a
See page 31
8a/b
16 O-ring
336 190 311 10 x 944 610 206
17 Hose w. quick connector female 88 197-51
Euro con. Octopus, 0.49m
3 O-ring
336 190 221 10 x 944 610 204
18 DIVATOR reg. Octopus hose 30 644-51
4 90º connection
88 119-51
19 O-ring
336 190 237 10 x 336 900 099
5 Protective cap
336 190 257 3 x 331 100 254
20 Holder strap, extra air manifold 99 099-51
6 Hose short w. quick connector 88 156-52 for FFM, 0.54 m
21 Holder strap
7 DIVATOR reg. mask hose
30 645-51
22 -
8a O-ring for #16 with UNF3/8"
8b O-ring for #16 with BSP1/8"
460 190 529 10 x 336 920 009
460 190 599 10 x 336 900 272
0.8 m
9 10 Breathing valve supply hose
460 190 560 0.75 m
11 Extra air manifold, E-10
346 190 040
12 O-ring for #11
336 190 228 10 x 336 900 007
13 O-ring
336 190 236 10 x 944 610 205
For Octopus, 1.12m
460 190 561
23 Non return valve complete
346 190 223 24 O-ring for #26
346 190 069 10 x 944 610 210
25aDry suit inflation hose UNF 3/8" 97 474-53
25bDry suit inflation hose BSP 1/8"97 474-51
14 Protective cap strap
88 208-51
Single pack
15aBreathing hose
15bDIVATOR second breath. hose
15cOctopus hose
15dOctopus hose
99 007-53
99 007-51
99 007-52
99618-51
UNF 3/8", 1 m
96 531-51
UNF 3/8", 1.7 m 26 Quick coupling
UNF 3/8", 1.13 m 27 Cone with. O-ring
460 190 369
UNF 3/8", 0.827 m
28 BCW inflator hose, UNF 3/8" 30 411-51
30
0.75 m locked
0.75 m unlocked
1 m locked
1 m unlocked
0.55 m locked
0.55 m unlocked
0.75 m locked
0.75 m unlocked
1.15 m
Pressure Gauge ASSemblY
2
6
3
1
5
1 High pressure hose 460 190 724 0.75 m incl # 3 & 6
2 Pressure gauge cover
99 266-54
3 O-ring
336 190 235 10 x 944 610 201
4a Pressure gauge, Bar 4b Pressure gauge, Psi
99 265-51
99 265-52
88 139-52
6 O-ring
336 190 221 10 x 944 610 204
31
4
MKIII Regulator UNIT
19
16
17
18
15
2
3
9
10
11
12
13
14
4
2
6
1
5
36
21
22
39
5c
37
38
8
7
23
20
1 CDR handle
88 111-51
13 Nipple
460 190 382
2a Plug-in pressure regulator.
2b Plug-in pressure regulator
2c Plug-in pressure regulator
88 170-01 1/8" parallel
88 170-023/8" 90 degree
88 170-03 3/8" parallel
14 O-ring (high pressure)
336 190 272 10 x 331 100 767
15 O-ring
31 189-51
3a Relief valve assy. BSP 1/8
3b Relief valve assy. UNF 3/8
460 190 387
30 660-51
16 Anti freezing cap holder
88 162-51
4 Locking clip
see #4 on page 33
5a Bend protection, CDR 5b Bend protection, DR 5c Bend protection, Ice-dive
88 113-51
88 113-52
31 721-51
black
nickel-plated
6 Regulator manifold
7a CDR valve insert
Incl. O-rings # 20 (x3) & 22 (x2)
7b CDR valve insert
Incl. O-rings # 20 (x3) & 22 (x2)
10 x 31 189-01
17 Anti freezing cap 460 190 507 6 x 336 100 425
18 Anti freezing cover w screw
460 190 763
19 Anti freezing unit
30 028-51
incl. #15, 16, 17 & 18
20 O-ring
346 190 021 10 x 346 900 001
21 Ball, 4 mm
96 599-53
---
22 O-ring
88 137-51
10 x 88 137-01
88 120-51
23 DR-mode locking ring
88 109-51
10 x 88 109-01
24 Spring
346 190 026 5 x 346 100 005
88 120-61
nickel-plated w slot
re-worked
10 x 96 599-03
25 Piston
460 190 386
26 O-ring
346 190 022 10 x 346 190 002
8 Mounting kit, CDR valve
460 190 758
Incl. screw, spring, steal ball #21& O-ring # 22
27 Adjusting screw
460 190 388 5 x 346 100 009
9 Handwheel G5/8"
88 178-51
28 Valve seat set
346 190 023
10 O-ring
336 190 232 10 x 336 900 044
29 O-ring and support ring
460 190 198 10 x 346 900 001 +
11 Connection nipple
460 190 383
12 Inlet filter
346 190 643 10 x 212 100 014
32
95 471-01
MKIII Plug-in pressure Regulator
25
24
A
B
C
26
29
28d
30
34
31
28b
28b
28a
3
33
D
28c
35
4
27
28
32
A Plug-in pressure regulator
B Plug-in pressure regulator
C Plug-in pressure regulator
D Plug-in pressure regulator
Service kit MKIII - Annual service
- 1 single items of #12 & 14
- 2 items of #15 & 17
460 190 717
Service kit MKIII regulator unit
Regulator manifold
- 1 single items of #12 & 14
- 2 items of #15 & 17
Pressure regulator
- 2 items of # 26, 28, 29, 30, 31, 33 & 34
460 200 518
88 170-01
88 170-02
88 170-03
88 170-04
1/8" parallel
3/8" 90 degree
3/8" parallel
1/8" parallel +
back port
30 O-ring
10 x 31 401-01
31 401-51 31 O-ring
346 190 024 10 x 346 900 004
32 Regulator housing
-
33 Protective band
346 190 053 10 x 346 100 066
34 O-ring
336 190 311 10 x 944 610 206
35aRegulator cover, 2-port
88 193-51
35bRegulator cover, 2-port
88 193-52
35cRegulator cover, 2-port
88 193-53
35dRegulator cover, 2-port
88 193-54
1/8" parallel
3/8" 90 degree
3/8" parallel
1/8" parallel +
back port
36 CDR Freeze protection 31 723-51
10 x 31 723-01
37 Screw MC6S 2.5x6
99 725-51
10 x 99 725-01
38 Sealing ring
31 722-51
10 x 31 722-01
39 Ice-dive kit, assembled
31 724-51
Incl #1, 5c,36,37 & 38
33
DIVATOR BCW - Wing type buoyancy compensator
1
2
15
3
3
15
15
10
11
16
14
4
5
13
12
13
12
6
7
8
6
10
9
1 DIVATOR BCW Wing Type
99 095
2a Shoulder strap Small
2a Shoulder strap Medium
2a Shoulder strap Large
2a Shoulder strap X-large
99 540-51
99 540-52
99 540-53
99 540-54
3 DIVATOR BCW inflator assy. 99 552-51
4 Sternum strap assy.
99 542-51
5 Rip-cord assy w. lead fastener
99 543-51
6 Over pressure valve assy
99 545-51
7 Cummerbund waist panel 99 546-01 8 Screw set (male & female)
99 547-51
9a Outer bladder cover assy
9b Inner bladder 99 548-01
99 549-01
incl. #9b & 2 pcs of #6
not shown
10 Rail assy. for BCW 99 550-01
compl. incl. mount
11 Rail for BC 460 190 554
pair
12 DIVATOR BCW mount spacer 99 091-51
pair
13 Screw 99 416-51
10 x 99 416-01
14 Locking assy
99 551-01
15 BCW velcro holder spare kit 460 190 923 1 x 30 640-01 + 1 x 30 640-02
16 Strap separator hook, kit
460 190 924
17 Mouthpiece
99 567-51
18 BCW inflator 99 541-51
19 O-ring 16,3 x 2,4
460 200 526 10 x 331 900 120
5 x 99 567-01
20 DIVATOR BCW Inflator hose 99 363-51 21 BCW exhaust valve gasket
88 444-51
22 DIVATOR BCW
Flange valve cap
30 144-51
34
5 x 88 444-01
BCW - accessories
21
26
24
22
17
18
25
23
21
6
28
30
31
32
27
5
8
18
29
19
20
21
3
4
23 Cylinder connector for BCW 99 927-01
24 Protective band
346 190 053 10 x 346 100 066
25 O-ring
336 190 272 10 x 331 100 767
26 Globe sticker
99 259-51
5 pack
27 Elastic cord loop
99 431-51
5 x 99 431-01
5 x 31 703-01
28 Tri-glide D-ring 2"
31 703-51
29 Hose holder
32 062-51
10 x 32 062-01
30 Side release buckle 50 mm
88 351-51
Incl. 5 x #31 & 32
31 Side release buckle, male
88 351-52
5 pack
32 Side release buckle, female
88 351-53
5 pack
35
BCW - exhaust valve assembly
1
2
3
4
1 BCW exhaust valve gasket
88 444-51
2 O-ring, remote exhaust valve 99 571-51 3 Non return exhaust valve
99 572-51
4 Cap for exhaust valve 99 573-51
5 x 88 444-01
10 x 99 571-01
ervice kit BCW Inflator
S
- 1 single items of #1, 2, 3 & 19 (page 35)
36
460 200 525
Harness - single & cylinder pack
12
6
15
13
5, 11
11
3
4
1
1
16
8
9
11
14
2
10
11
17
11
7
18
19
• Harness, cylinder pack
12 Strap separator hook
336 100 572
13 Locking arm assy
460 190 191
14 Cylinder bracket, blank
336 190 585
15 Washer
336 190 261 10 x 944 482 146
336 190 975 Replaced by
30650-01, see p. 38
• Harness, single 100-140mm
• Harness, single 140-183mm
336 190 976
336 190 977
1 Shoulder straps
460 190 524
2 Hip belt buckle assy
346 190 112
3 Webbing buckle
460 190 373 2 x 336 100 115
4 Backplate
460 190 590
5 Clamping plate
460 190 302 10 x 336 100 691
6 Hook
460 190 572
7 Hook
460 190 573
8 Buckle assy. left
346 190 318
9 Buckle assy. right
346 190 319
10 Locking nut
336 190 453 10 x 336 900 184
11 Screw
460 190 575 10 x 941 217 323
16aCylinder strap, single 100-140mm 336 190 575
16bCylinder strap, single 140-183mm 336 190 828
17 Threaded washer
460 190 576
18aHandle, single 100-140mm
18bHandle, single 140-183mm
336 190 836
336 190 838
19 Rubber bushing
460 190 597
• Single cylinder mounting kit
Single cylinder 100-140mm
incl. (3 x #11), #16a, 17 &18a
336 190 837
• Single cylinder mounting kit
Single cylinder 140-183mm
incl. (3 x #11), #16b, 17 &18b
336 190 839
37
Harness PRO
12
6
4
15
13
5, 11
18
18
11
16
3
3
16
17
14
9
8
1
2
1
10
11
7
• Harness, cylinder pack
30 650-01
1 Shoulder straps
460 190 524
11aScrew 11bScrew M5 x 10, 10 pack
460 190 575 10 x 941 217 323
346 190 190 for use with #17
2 Hip belt buckle assy
346 190 112
12 Strap separator hook
336 100 572
3 Webbing buckle
460 190 373 2 x 336 100 115
13 Locking arm assy.
460 190 191
4 Backplate
460 190 590
14 Cylinder bracket, blank
336 190 585
5 Clamping plate
460 190 302 10 x 336 100 691
15 Washer
336 190 261 10 x 944 482 146
6 Hook
460 190 572
16 D-ring angled 40 mm
30 636-51
7 Hook
460 190 573
17 Octopus hose holder kit
30 643-51
8 Buckle assy. left
346 190 318
18 BCW velcro holder spare kit 460 190 923 pair
9 Buckle assy. right
346 190 319
10 Locking nut
336 190 453 10 x 336 900 184
38
4 x 30 636-01
Cylinder Steel - Single 316
*
Spare parts intended for organizations
certified to perform periodic cylinder
inspections.
1
2
4
3
1 Cylinder boot
460 190 462 2 pack
2 Label DIVATOR MKII
336 100 467
3 O-ring* M18x1,5
460 190 304 10 x 336 900 338
4 Cylinder valve, DIN 90°*
98 430-13
39
Cylinder Steel - Pack 324
9
*
12
5
inspections.
15
7
13
1
11
21
3
20
15 12
15
5
7
2
5
13
14
19
6 4
4
11 15
2
21
3
19
5
16
6
17
10
2
16
18
1 INTERSPIRO label
460 190 230 10 x 95 849-01
18 Cylinder valve*
98 420-10
2 Screw
336 190 241 10 x 941 104 372
19 O-ring* 460 190 304 10 x 336 900 338
3 Guide washer
4 Screw
460 190 472 2 x 336 100 072
336 190 243 10 x 941 104 376
20 Clamping strap assy.
336 190 146
Including single items of 3, 5, 7,12 & 13 and dual items of 11 & 15
21 Spacing washer
460 190 470 10 x 336 100 226
5 Screw, MC6S M6x30 460 190 579 2 x 941 104 374
6 Gasket*
460 190 301 10 x 336 100 305
7 Spacer bushing
460 190 482 2 x 336 100 073
9 Cylinder boot
460 190 460 2 x 331 100 362
10 Cross over tube*
336 190 294 incl. item #6
O-ring, 10 items of #19
11 Retaining plate
460 190 468 10 x 336 100 071
12 Clamping strap
460 190 464
Gasket, 10 items of #6
13 Spacer
336 190 068
14 Nipple*
460 190 582
15 Protective ring
460 190 219 10 x 336 100 068
16 Handle assy. 324, 30 mm neck 460 190 535
17 Nut
336 190 244 10 x 941 680 316
40
460 190 304
460 190 301
Cylinder Steel - Pack 326
*
9
12
8, 5
inspections.
28
11
15
29
13
27
1
15 12
15
3
8, 5
11
7
2
30
13
14
19
6 4
4
11 15
2
3
19
16
6
17
10
2
16
18
1 INTERSPIRO label
460 190 230 10 x 95 849-01
14 Nipple*
2 Screw
336 190 241 10 x 941 104 372
15 Protective
ring
460 190 219 10 x 336 100 068
3 Guide washer
460 190 512 2 x 336 100 975
16 Handle section
460 190 583 2 x 331 100 471
4 Screw
336 190 243 10 x 941 104 376
17 Nut
336 190 244 10 x 941 680 316
460 190 582
5 Washer
460 190 580 2 x 944 482 153
18 Cylinder valve*
98 420-10
6 Gasket*
460 190 301 10 x 336 100 305
19 O-ring* M18x1,5
460 190 304 10 x 336 900 338
7 Spacing rod
460 190 620
27 Easy-Fill valve
88 169-51
8 Screw
460 190 581 2 x 336 900 339
28 Plug w. O-ring
460 190 220 Incl. #29
9 Cylinder boot
96 513-51
29 O-ring
336 190 220 10 x 944 610 309
10aCross over tube*
10bCross over tube*
460 190 473
88 195-52 for Easy-Fill
2 x 95513-01
11 Retaining plate
460 190 468 10 x 336 100 071
12 Tension strap
96 500-51
13 Spacer
331 100 475
2 x 96 500-01
30 Cylinder ring assy Divator 326 460 190 533
Including single items of 3, 5, 8,12 & 13 and dual items of 11 & 15
O-ring, 10 items of #19460 190 304
41
460 190 301
Cylinder Composite - Pack 323.4
12
22
* Spare parts intended for organizations certified to
perform periodic cylinder inspections.
15
24
28
27
10
1
12
3
29
8, 14
9
26
13
25
23
** The O-ring #19 shall only be installed
6
on cylinder valves having an O-ring
groove. On cylinder valves without
O-ring groove no O-ring shall be
installed.
2
20
2
3
19**
5
16
17
6
16
18
21
• Cylinder pack 2x3.4L, PED
• Cylinder pack 2x3.4L, DOT
98 853-01
98 853-02
17 Nut
336 190 244 10 x 941 680 316
18 Cylinder valve*
98 420-14
1 Spacing rod
97 501-51
19 O-ring* M17x1,5
31 115-51
2 Screw
336 190 241 10 x 941 104 372
20 Nipple*
460 190 626
3 Guide washer
460 190 472 2 x 336 100 072
21 Cross over tube assy*
460 190 313 incl. #6
5 Screw
97 506-52
22 Cylinder boot
460 190 461 2 x 356 100 019
6 Gasket*
460 190 301 10 x 336 100 305
23 Screw
97 506-52
8 Screw
97 506-53
24 INTERSPIRO label
460 190 230 10 x 95 849-01
10 x 97 506-02
10 x 97 506-03
10 x 31 115-01
10 x 97 506-02
9 Nut
97 507-51
10 x 97 507-01
25 Anti slide protection
460 190 467 4 x 356 100 011
10 Weight shaft
97 502-51
10 x 97 502-01
26 Sealing cone assy*
95 601-01
12 Clamping strap 3.4L
460 190 465
27 O-ring -
10x incl. in 96085
13 Spacer
460 190 474 2 x 356 100 004
28 Support ring
-
10x incl. in 96085
14 Washer
460 190 624 10 x 356 100 008
29 O-ring
-
10x incl. in 96085
15 Protective ring
460 190 219 10 x 336 100 068
16 Handle assembly
356 190 019 incl. #2, 17 & 23
O-ring and support ring kit, M17 Sealing cone 96 085
- 10 items of #27, 28 & 29
460 190 301
O-ring**, 10 items of #1931 115-51
42
Cylinder Composite - Pack 326.7
31
12
22
32
8, 14
33
15
13
24
27
28
29
30
10
15 12
11
1
15
3
8, 14
2
9
7
15
20
19
23
11
26
13
25
23
6
2
4
19
5
*
Spare parts intended for organizations certified to
17
2
perform periodic cylinder inspections.
16
6
16
18
21
• Cylinder pack 2x6.7L, PED
98 857-01
• Cylinder pack 2x6.7L, DOT
98 857-02
• Cylinder pack 2x6.7L, Easy-fill 98 857-04
19 O-ring* M18x1,5
460 190 304 10 x 336 900 338
20 Nipple*
96 412-51
97 358-51
88 195-51
PED approved
1 Spacing rod
97 501-51
21aCross over tube*
21bCross over tube*
2 Screw
336 190 241 10 x 941 104 372
22 Cylinder boot
460 190 463 2 x 356 100 029
3 Guide washer
97 857-52
23 Screw
336 190 243 10 x 941 104 376
4 Guide washer
97 857-51
24 INTERSPIRO label
460 190 230 10 x 95 849-01
5 Screw
336 190 243 10 x 941 104 376
25 Anti slide protection
97 510-51
6 Gasket*
460 190 301 10 x 336 100 305
26 Sealing cone assembly*
98 813-01
for Easy-Fill
4 pack
7 Screw
97 825-51
10 x 97 825-01
27 O-ring
-
10x incl in 460190103
8 Screw
97 506-51
1 x 97 506-01/-02
28 Support ring
-
10x incl in 460190103
9 Nut
97 507-51
10 x 97 501-01
29 Support ring
-
10x incl in 460190103
10 Weight shaft
97 502-51
30 O-ring
-
10x incl in 460190103
11 Retaining plate
460 190 468 10 x 336 100 071
31 Easy-fill valve
88 169-51
12 Tension strap
97 513-51
32 Plug w. O-ring
460 190 220 Incl. #29
13 Spacer
460 190 474 2 x 356 100 004
33 O-ring
336 190 220 10 x 944 610 309
14 Washer
460 190 624 10 x 356 100 008
15 Protective ring
460 190 219 10 x 336 100 068
# SERVICE KIT
16 Handle assembly
460 190 689 incl. #2, 17 & 23
17 Nut
336 190 244 10 x 941 680 316
18 Cylinder valve*
98 420-08
-ring and support ring kit, M18 Sealing cone 460 190 103
O
- 10 items #27, 28, 29 & 30
Gasket, 10 items #6 460 190 301
O-ring, 10 items #19
460 190 304
43
Order #
two TYPES of cylinder VALVE
IMPORTANT NOTICE
The are two different types of the cylinder valve, Type I and Type II.
Cylinder valves delivered under part numbers "98xxx" are Type II.
Deliveries of Type II cylinder valves commenced in July 2005.
Type II cylinder valves can be identified by the marking with Interspiro
logotype, see #1 in picture below. Furthermore the marking #2 according to
picture below always beginning with "98xxx", defining the part number of the
cylinder valve.
Type I cylinder valves have no logotype marking according to #1 in picture
below.
Type I cylinder valves can have different markings according to #2 in picture
below, but never beginning with "98xxx".
For spare parts to Type I cylinder valves see page 45.
For spare parts to Type II cylinder valves see page 46.
1
2
44
cylinder valve
Cylinder valve Type I
*
inspections.
16
17
14
13
1
15
18
11
12
3
5
7
6
8
4
10
2
9
19
20
21
1 Hand wheel cover, black
460 190 359
5 x 336 100 061
14 Blank plug* ---
2 Valve slug
336 922 108
5 x 336 190 032
15 O-ring*
460 190 304 10 x 336 190 221
3 Washer
336 190 296 10 x 336 900 008
16 Burst disc rubber plug
336 190 262 10 x 150 040 998
4 Gland seal
336 190 260 10 x 336 100 053
17 Burst plug, 300 Bar*
---
5 Spring
336 922 105 10 x 336 100 058
18 Burst disc kit*
460 190 225
6 O-ring
336 190 221 10 x 944 610 204
19 Plug w. O-ring
460 190 220 Incl. #20
7 Washer
336 922 104 10 x 336 100 057
20 O-ring
336 190 220 10 x 944 610 309
8 Gland nut
460 190 356
21 Discharge plug/Drain plug
460 190 770
9 Hand wheel
460 190 243
22 Valve stem set
336 190 298 Incl. #2, 3 &10
10 Valve stem
460 190 355
11 Screw
336 190 297 10 x 331 900 064
# SERVICE KIT order #
12aO-ring for M17 x 1,5*
12bO-ring for M18 x 1,5*
460 190 331 10 x 96 796-01
460 190 304 10 x 336900338
13 Cylinder support
346 190 230 10 x 336 100 081
ervice kit for 1 Cylinder valve, Type I460 190 390
S
- 1 single item of each of #2, 4 & 6
45
cylinder valve & easy-fill valve
Cylinder valve Type II
1
2
3b
4
8
11
5
6
7
10
13
9
14
3a
12
Easy-Fill valve
*
13
14
20
15
inspections.
22
17
24
21
23
16
18
25
15
19
A
A Easy-fill valve complete
88 169-51
16 Plug w. O-ring
460 190 220 incl. #18
1 Screw
336 190 297 10 x 336 900 094
17 O-ring
336 190 220 10 x 944 610 309
2 Washer
336 190 296 10 x 336 900 093
18 Discharge plug (DIN)
460 190 770
3a Hand wheel assy, black
3b Hand wheel cover, black
460 190 243
460 190 359 5 x 336 100 061
19 Protective plug strap
88 205-51
20 Sealing
--
Part of 460 190 732
4 Spring
336 922 105 10 x 336 100 058
21 Sealing cone
--
Part of 460 190 732
5 Back-up ring
97 847-51
10 x 97 847-01
22 O-ring
--
Part of 460 190 732
6 O-ring
97 851-51
10 x 97 851-01
23 Valve housing
88 165-51
7 Glide washer 97 853-51
10 x 97 853-01
24 O-ring
--
8 Washer
336 922 104 10 x 336 100 057
25 Plug
-
9 Valve slug
97 850-51
10 Valve stem
97 849-51
11 Gland nut
97 852-51
#spare partorder #
12 Valve housing
---
13 Burst disc plug*
97 399-51
ervice kit for "Easy-fill"
S
- 1 single item of each of # 20-22 & 24
14 Burst disc*
97 740-51
15aO-ring for M18 x 1,5*
15bO-ring for M17 x 1,5*
460 190 304 10 x 336 900 338
31 115-51 10 x 31 115-01
Part of 460 190 732
460 190 732
ervice kit for 1 cylinder valve type II460 190 686
S
- 1 single item of each of #7, 8, 9 & 11
46
cylinder Pack Weights
7
8
7
3
10
1
4
9
2
5
6
• Weight, 13.8 kg
97 520-11
For 326.7 incl. 1 pcs of #1 & #8, 2 pcs of #2 & #7
• Weight, 11.4 kg
97 520-12
For 325, 326.7 incl. 1 pcs of #1 & #8, 2 pcs of #3 & 7
For 323.4 Incl. 1 pcs of #1 & #8, 2 pcs of #4 & #7
• Weight, 9.3 kg
97 520-13
1 Weight, upper, 7.2 kg
97 521-51
2 Weight, lower, 3.3 kg
97 522-51
97 522-52
97 522-53
5 Weight substitute
97 869-51
6 Weight substitute
97 869-52
7 Screw 97 528-51 8 Hair pin assy.
460 190 570
9 Handle protection kit
88 199-51 2 x 97 528-01
2.6 m
10 Handle wire kit, upper weight 460 200 524 Including 2 x 260 mm of #9
47
Weight system
1
2
3
2
1 Buckle, complete (male/female) 460 190 766 6 x 336 900 406
2 Screw
336 190 439 10 x 941 134 224
3 Weight stabilizer
88 356-51
48
5 x 88 356-01
DP1 Surface panel
1
8
7
2
3
11
4
5
6
a
12
10
9
b
#spare part
ORDER #
1 Surface panel box
---
2 Whistle insert
---
NOTES
See page 51
#spare part
ORDER #
11 Plug, R5/8” 95 198-51
12 T-piece 300 Bar/4350 Psi
---
See page 58
NOTES
3 Shuttle insert
---
See page 52
4 Hose
---
See page 53
5 Venting insert
460 190 916 See page 55
# SERVICE KIT
ORDER #
ervice kit for 1 Surface unit
S
One year maintenance
460 190 701
ervice kit for 1 Surface unit
S
Six year maintenance
460 190 702
6 Connection manifold
---
See page 54
7 Valve block
---
See page 50
8a Label 8b Label 8c Label
8d Label
97 046-51
97 046-52
97 046-63
97 046-99
English
Swedish
German
US English
9 Plug, R5/8” parking
96 718-51
10 Screw
96 723-51
10 x 96 723-01
49
NOTES
DP1 valve block
17
14
18
15
19
16
8
9
11
10
2
12
13
3
1
4
20
5
6
21
7
#spare part
ORDER #
NOTES
#spare part
ORDER #
NOTES
1 Valve block, single assy
346 190 329
2 Hand wheel connect.
460 190 385
13aRubber cover
13bRubber cover
99 266-52
96 548-51
For 460 190 381 & ..715
336 190 232 10 x 336 900 044
14 Screw
96 723-51
10 x 96 723-01
336 190 261 10 x 944 482 146
3 O-ring
4 Connection nipple
460 190 383
15 Washer
5a Filter
5b Filter 346 190 643 10 x 212 100 014
346 190 644 100 x 212 100 014
16 Nut
336 190 244 10 x 941 680 316
17 Screw
336 190 243 10 x 941 104 376
6a O-ring
6b O-ring 336 190 272 10 x 331 100 767
460 190 237 100 x 331 100 767
18 Screw
96 723-52
10 x 96 723-02
19 Sleeve
99 226-51
10 x 99 226-01
7 Nipple
460 190 382
20 Cover, Quick Coupling
460 190 753
8 Cylinder support
346 190 230 5 x 336 100 081
21 Plug R5/8 95 198-51
9 Valve block manifold
---
10 Gasket set
336 190 159
# SERVICE KIT
ORDER #
11 Sleeve
336 100 832
460 190 919 Incl. #10
460 190 918 Incl. #10
ervice kit for one HP Connection S
Surface unit
- 1 single items of each of #5/6
460 190 711
12aPressure gauge, Bar
12bPressure gauge, Psi
50
5 x 331 900 31
DP1 Whistle insert
5
1
2
6
7
11
14
3
3a
12
4
13
3c
8
10
15
9
#spare part
ORDER #
460 190 143 Not incl. #9 & 10
12 Whistle cylinder
346 190 248
346 190 220 Incl. #6
13 Sealing cone
346 190 217 10 x 346 100 081
#spare part
ORDER #
• Whistle insert (55 bar)
1 Nozzle with o-ring 3b
NOTES
NOTES
2 Regulating piston
346 190 219 Incl. #7 & 14
14 O-ring
460 190 269 10 x 346 900 015
3 Piston assy.
346 190 216 Incl. #8
15 O-ring & back up rings
460 190 200
4 Sealing label
346 190 296 20 x 97 081-01
5 Whistle assy.
346 190 221
6 O-ring
346 190 251 10 x 346 900 016
7 O-ring
346 190 249 10 x 346 900 014
8 O-ring
336 190 240 5 x 331 100 562
9 Locking clip
346 190 293 10 x 346 100 158
10 Retaining ring
460 190 299 10 x 346 100 208
11 Spring
346 190 218 5 x 346 100 082
10 x 346 900 017 & 95 473-01
# SERVICE KIT
ORDER #
ervice kit for one Whistle S
Surface unit
- 1 single item of each of #4/6-10/13-15
460 190 323
51
DP1 Shuttle insert
6
1
2
3
a
4
b
c
5
#spare part
ORDER #
NOTES
1 Retaining ring
460 190 299 10 x 346 100 208
2 Locking clip
346 190 293 10 x 346 100 158
3 Shuttle kit
460 190 750
4 O-ring
336 190 220 10 x 944 610 309
5 O-ring
336 190 312 10 x 336 900 105
6 Shuttle insert
460 190 709
# SERVICE KIT
ORDER #
ervice kit for 1 Shuttle insert S
Surface unit
- 1 single item of each of #1-3
- 2 single items of each of #4 & 5
460 190 712
52
DP1 Hose & Relieving loop
4
5
1
2
2
7
3b-3h
3a
2
9
7
8
6
#spare part
ORDER #
NOTES
1 Connection R5/8” 96 721-51
300 Bar, for 3b-3g
2 O-ring
336 190 312 10 x 336 900 105
3a Hose
3b Hose 3c Hose 3d Hose 3e Hose 3f Hose 3g Hose 3h Hose 96 116-51
99 086-02
99 086-03
99 086-04
99 086-05
99 086-06
99 086-07
99 086-08
1 m, Incl. #2
60 m, Incl. #2 & 4
70 m, Incl. #2 & 4
30 m, Incl. #2 & 4
120 m, Incl #2 & 4
10 m, Incl #2 & 4
90 m, Incl #2 & 4
80 m, Incl #2 & 4
2 x 96 726-01
4 Relieving loop
96 726-51
88 139-51
6 Hose bend restrict. kit
460 190 917
Incl. 2 single items of #2
7 Vulcanizing tape
97 045-51
10 m.
8 Line, waxed
96 739-51
5m
9 Protective plug
97 039-51
10 x 97 039-01
53
DP1 Connection manifold
1
2
#spare part
ORDER #
3
4
NOTES
1 Connection manifold
96 786-51
2 Hand wheel connection
460 190 385
3 O-ring
336 190 232 10 x 336 900 044
4 Connection nipple
460 190 383
5a Filter
5b Filter 346 190 643 10 x 212 100 014
346 190 644 100 x 212 100 014
6a O-ring
6b O-ring 336 190 272 10 x 331 100 767
460 190 237 100 x 331 100 767
7 Nipple
460 190 382
54
5
6
7
# SERVICE KIT
ORDER #
ervice kit for one HP connection
S
Surface unit
- 1 single item of each of #5 & 6
460 190 711
DP1 Venting insert
1
2
3
4
5
#spare part
ORDER #
NOTES
1 Retaining ring
460 190 299 10 x 346 100 208
2 Locking clip
346 190 293 10 x 346 100 158
3 O-ring
336 190 220 10 x 944 610 309
4 Venting screw
460 190 751
5 Venting valve, 300 Bar 460 190 916 Incl. #1-4
# SERVICE KIT
ORDER #
ervice kit for one Vent insert S
Surface unit
- 1 single item of each of #1-3
460 190 713
55
DP1 Regulator, P+
19
28
12
6
20b
13
9
20a
1
2
20b
3 4 5 7 8 10
21 22
23
24
25
26
27
29
11
14 15
16 17 18
30
#spare part
ORDER #
NOTES
1 Anti freezing cover
460 190 523
2 Anti freezing cap
460 190 507 6 x 336 100 425
3 Hose clamp
460 190 526
4 Sealing plate
336 190 256 25 x 336 100 035
5 Adjustment screw
460 190 425 5 x 336 100 127
6 O-ring
336 190 231 10 x 336 900 043
7 Seat, regulator
460 190 591 10 x 336 100 126
8 Spring
346 190 028 5 x 336 100 280
9 Supporting washer
336 190 637 10 x 336 100 131
10 O-ring
336 190 233 10 x 336 900 045
11 Valve seat set
460 190 648 Incl. #6-10
12 Nipple, P+ regulator
---
13 O-ring
336 190 232 10 x 336 900 044
14 O-ring 336 190 221 10 x 944 610 204
15 Blind plug
-
16 Relief valve, 17 Bar
96 724-51
17 Protective band
346 190 053 10 x 346 100 066
Incl. #17/18
18 O-ring
336 190 311 10 x 944 610 206
19 O-ring 336 190 312 10 x 336 900 105
#spare part
ORDER #
NOTES
20aControl spring 20bControl spring 460 190 484 5 x 336 100 048
96 722-51 5 x 96 722-01
21 Piston
460 190 420
22 O-ring
336 190 230 10 x 336 900 042
23 Stop ring
460 190 424 5 x 336 100 049
24 Diffuser
460 190 564
25 O-ring
336 190 229 10 x 336 900 041
26 Cover, P+ regulator
---
27 O-ring
336 190 238 10 x 944 610 207
28 Quick coupling cover
460 190 753 5 pack
29 Quick coupling
460 190 754
30 Regulator, MKII P+
96 720-51
# SERVICE KIT
ORDER #
ervice kit, DIVATOR P+ regulator460 190 703
S
Six year maintenance for one
DIVATOR P+ regulator
- 1 single item of each of #2, 4, 6, 7, 10, 17, 19, 22 & 25
56
DP1 Accessories
2
1
3
4
7
6
8
5
#spare part
ORDER #
1 Sign “OPEN”
97 335-51
NOTES
2 Pressure relief handle
97 373-51
3 Carbine hook
336 921 843 stainless steel
4 Safety belt
96 741-51
5 Hose winding frame kit
96 745-12
Std size, incl. straps
6 Strap, hose retaining
97 859-51
T-shape
7 Strap, hose retaining
97 860-51
8 W-frame coupling
99 366-51
57
for old version of winding frame
DP1 t-piece
1
2
3
4
5
6
1b
#spare part
ORDER #
NOTES
1a T-piece, curved
1b T-piece, straight
346 190 093 300 Bar/4350 Psi
30 030-51 300 Bar/4350 Psi
2 O-ring, 300 Bar/4350 Psi
336 190 232 10 x 336 900 044
3 aConnection nipple 3 bConnection nipple 460 190 493 Straight
346 100 099 Curved
4 Hand wheel cover
460 190 483 5 x 336 200 036
5 Hand wheel
460 190 495
6a O-ring
6b O-ring 336 190 272 10 x 331 100 767
460 190 237 100 x 331 100 767
7 Nipple
460 190 497
58
7
TOOLS
1
2
3
4
5
6
7
8
9
10
11 12
13
14
15
16
17
55
54
58
18
53
26
27
19
20 21
22
23
24
25
56
52
28 29 30 31
32
33
34
35
36
37
38
39
40
41
42
43
44
45 46 47 48 49 50 51 57 59
#toolorder #
#toolorder #
1 Control gauge, DIN 300 bar
Psi 4350 psi
99 804-01
99 804-02
29 U-spanner, 12 mm
31 236-51
30 U-spanner, 10 - 13 mm
460 190 774
2 Silicone lubricant
331 900 269
460 190 769
3 Lubricant for cylinder valves
331 900 268
460 200 025
4 Locking compound
460 190 846
460 190 775
5 Krytox lubricant
460 200 058
34 U-spanner, 20 mm
460 200 010
6 Awl 100 mm
460 190 768
35 U-spanner, 23 mm
460 200 009
7 Hexagonal wrench 8 mm T-handle
31 496-51
36 U-spanner, 24 mm
99 519-51
8 Hexagonal key
460 200 008
460 200 522
37 U-spanner, 25 mm
460 200 026
38 U-spanner, 26 mm U-spanner, 28 mm
31 282-51
460 200 527
39 Circlip pliers
460 200 519
40 Long nosed pliers
460 190 772
5 mm
3 mm
9 Screwdriver, PZ-1
PZ-2
460 200 028
460 200 011
10 Screwdriver 1 x 5,5
460 190 767
11 Protective pin
460 190 565
12 Punch tool
460 190 566
13 O-ring tool kit
30 042-51
14 Fixture whistle
460 190 848
15 Multi-fixture for MKIII
31 207-01
16 Fixture for P+regulator
460 190 855
17 Ball hammer
---
18 Torque wrench assy 5-50 Nm
336 190 478
19 Torque wrench adapter 8 mm
30 223-51
99 502-51
95 998-20
22 Torque wrench adapter25 mm 29 mm 30 719-51
99 534-51
23 Torque wrench adapter 13 - 15 mm
460 190 852
460 200 515
460 190 773
26 Level Bar tool
30 004-51
99 211-01
460 190 567
43 Socket, Cylinder valve
460 190 568
44 Socket long, 15 mm
460 200 029
45 Socket, 5 mm hexagonal
460 200 520
46 Socket, 8 mm hexagonal
460 200 031
47 Assembly tool, plug-in reg.
95 925-01
48 Assembly tool, whistle
95 926-01
49 Socket, whistle
460 190 849
50 Locking clip tool
30 550-51
51 Barrel brush
460 200 030
52 Socket Torx T30
99 533-51
53 Punch tool, DP1 shuttle valve
31 272-51
54 Discharge plug (DIN)
460 190 770
55 Fixture Warning manifold
97 951-51
56 Adjusting key
460 190 853
57 Mounting tool Hose bend restrictor 88 233-51
27 Filling adaptor DIVATOR Lite cylinder 99 369-01
28 U-spanner, 8 mm
41 Piston extractor
42 Socket, slotted, 19 mm
460 200 516
59
58 Fixture for manifold
460 190 850
59 Fixture for manifold, DP1
95 927-01
AUSTRIA
INTERSPIRO GesmbH www.interspiro.de
Feldbacher Str. 3 A-8200 GLEISDORF AUSTRIA
TEL +43 (0)311 236 133 FAX +43 (0)311 236 133 22 E-MAIL info@interspiro.de
GERMANY
INTERSPIRO GmbH www.interspiro.de
Postfach 1220 D-76691 FORST/BADEN GERMANY
TEL +49 (0)7251 8030 FAX +49 (0)7251 2298 E-MAIL info@interspiro.de
SWITZERLAND
INTERSPIRO AG www.interspiro.de
Güterstraße 47 CH-4133 PRATTELN SWITZERLAND
TEL +41 61 827 99 77 FAX +41 61 827 99 70 E-MAIL info@interspiro.ch
THE NETHERLANDS & BELGIUM
INTERSPIRO BV www.interspiro.nl
Operetteweg 35 NL-1323 VK ALMERE NETHERLANDS
TEL +31 (0)36 5363103 FAX +31 (0)36 5384809 E-MAIL infobv@interspiro.com
NORTH & SOUTH AMERICA
INTERSPIRO Inc. www.interspiro-us.com
10225 82nd Avenue PLEASANT PRAIRIE WI 53158-5801 USA
TEL +1 262 947 9901 FAX +1 262 947 9902 E-MAIL sales@interspiro-us.com
UNITED KINGDOM & IRELAND
INTERSPIRO Ltd. www.interspiro.com
7 Hawksworth Road Central Park TELFORD Shropshire TF2 9TU UNITED KINGDOM
TEL +44 (0)1952 200 190 FAX +44 (0)1952 299 805 E-MAIL infouk@interspiro.com
SCANDINAVIA, ASIA/PACIFIC & MIDDLE EAST
SWEDEN
NORDIC & EXPORT SALES DIVISION www.interspiro.com
Box 10060 S-181 10 LIDINGÖ SWEDEN
TEL +46 8 636 51 00 FAX +46 8 636 51 99 E-MAIL info@interspiro.com
MALAYSIA
NORDIC & EXPORT SALES DIVISION www.interspiro.com
305 & 305A Lorong Perak Taman Melawati 53100 KUALA LUMPUR MALAYSIA
TEL +60 3 4105 8122 FAX +60 3 4105 3122 E-MAIL asiapacific@interspiro.com
PART NO. 30924E01
CENTRAL EUROPE

bREATHInG vALvE

Transcription

Similar documents

divator full face mask and breathing valve