traction products - Kocher Enterprises

TRACTION PRODUCTS
Signature Series STAINLESS STEEL 60o CARBIDE STUD
TM
helmets &
accessories
clothing &
accessories
gloves &
accessories
THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. 1008 PACKS NOW CONSIST OF 10 PACKAGES OF
96 AND 2 PACKAGES OF 24 WITH A SAVINGS OF UP TO 10% OVER THE OLD 1000 PACK. Woody's combines the advantages of stainless steel
with their performance proven designs at a competitive price! The high corrosion resistance allows you to use the Signature Series™ in rigorous
environments. The stainless steel combined with the 5/16” shank and the 15/16” head of the Signature Series™ is resistant to impact even at extreme
temperature variations ensuring you a reliable grip on the trail with the 60° carbide tip. Available in popular lengths of 1.000", 1.075", 1.175", 1.325"
and 1.450" in packages of 24, 48, 96, 144 and 1,008 pieces.
boots &
accessories
luggage
accessories
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
rewind
SIZE
1.000" X 5/16”
1.075" X 5/16”
1.175" X 5/16”
1.325" X 5/16”
1.450" X 5/16”
24 PCS
SSP1005A 35.95
SSP1075A 35.95
SSP1175A 35.95
SSP1325A* 42.95
SSP1450A* 42.95
rear
suspension
96 PCS
SSP1005B 135.95
SSP1075B 135.95
SSP1175B 135.95
SSP1325B* 164.95
SSP1450B* 164.95
144 PCS
SSP1005C 203.95
SSP1075C 203.95
SSP1175C 203.95
SSP1325C* 246.95
SSP1450C* 246.95
1008 PCS
SSP1005M
SSP1075M
SSP1175M
SSP1325M*
SSP1450M*
1413.95
1413.95
1413.95
1707.95
1707.95
* Now being packaged with ALN2-4500 big nuts.
600 CARBIDE GOLD DIGGER TRACTION MASTER STUD
clutch
drive
48 PCS
SSP1005 69.95
SSP1075 69.95
SSP1175 69.95
SSP1325* 84.95
SSP1450* 84.95
THE 1.325” AND THE 1.450” PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. 1008 PACKS NOW CONSIST OF 10 PACKAGES OF
96 AND 2 PACKAGES OF 24 WITH A SAVINGS OF UP TO 10% OVER THE OLD 1000 PACK.The standard all other studs are compared with. A
sharp 60° carbide tip gives you superb traction and durability on hard-pack snow and ice. Most snowmobilers need added traction, so be serious
about it, buy Gold Digger® Traction Master® studs. The 5/16” has a 1” head and the 7mm has a 7/8” head. Both are through-hardened and heat
treated. Available in 24, 96, 144 and 1008 piece packages.
front
suspension
traction
products
our most popular!
mini sleds
chemicals
off-road
tools
snowblower
parts
go cart
trailer &
towing
SIZE
.8750" X 7MM
1.000" X 7MM
.8750" X 5/16”
.9200" X 5/16”
1.000" X 5/16”
24 PCS
GDP68750
36.50
GDP61000
39.50
GDP68755
50.95
GDP69205
50.95
GDP61005
50.95
96 PCS
-----
GDP61000B
139.50
GDP68755B
201.95
GDP69205B
201.95
GDP61005B
201.95
144 PCS
-----
GDP61000C 169.50
-----
GDP69205C 296.95
GDP61005C 296.95
1008 PCS
-----
---------
-----
-----
1.075" X 5/16”
1.175" X 5/16”
1.325" X 5/16”
1.450" X 5/16”
GDP61075
GDP61175
GDP61325*
GDP61450*
GDP61075B
GDP61175B
GDP61325B*
GDP61450B*
GDP61075C
GDP61175C
GDP61325C*
GDP61450C*
GDP61075M
GDP61175M
GDP61325M*
GDP61450M*
50.95
50.95
57.95
57.95
201.95
201.95
228.95
228.95
296.95
296.95
337.95
337.95
1923.75
1923.95
2189.95
2189.95
* Now being packaged with ALN2-4500 big nuts.
908
AUTOMATIC
DISTRIBUTORS
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
GRAND MASTERTM TRAIL STUD
helmets &
accessories
OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY. Woody's Grand Master™ with a larger 1.200 head provides a larger anchor to
distribute pressure over a wider area on the single ply track.The Grand Master™ is available in stud lengths of 1.075 with standard nuts and the 1.325
and 1.450 with ALN2-4500 big nuts. 1.575 has the tall big nuts ALN2-7000 in the packages. Packaged in quantities of 12, 48, 84 and 504. You must
use this stud if you have a single ply track. This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if you have a single
ply track.*2.52 pitch tracks must use the square aluminum large Digger® support plates. TORQUE SPEC--Grand Master studs must be torqued to
20 ft. lbs. Woody's also has an Indexing Tool available to align Grand Digger™ support plates.
clothing &
accessories
gloves &
accessories
boots &
accessories
luggage
accessories
body &
chassis
engine
SIZE 1.075" X 5/16”
1.325" X 5/16”
1.450” X 5/16”
1.575” X 5/16”
12 PCS
GMP1075-12
28.95
GMP1325-12* 32.95
GMP1450-12* 32.95
GMP1575-12** 32.95
48 PCS
GMP1075-48 114.95
GMP1325-48* 129.95
GMP1450-48* 129.95
GMP1575-48**129.95
84 PCS
GMP1075-84 195.95
GMP1325-84* 219.95
GMP1450-84* 219.95
GMP1575-84** 219.95
504 PCS
GMP1075-500
GMP1325-500*
GMP1450-500*
GMP1575-500**
electrical &
ignition
1070.95
1203.95
1203.95
1203.95
* Now being packaged with ALN2-4500 big nuts.
** Now being packaged with ALN2-7000 big nuts.
clutch
• Woody's Performance Profile Grand Master Pro™
for Cross Country Racers With Single Ply Tracks
• Machine 60° carbide tip and shank
• For Single Ply Track Only
• Four lengths: 1.075", 1.325", 1.450" & 1.575"
• Big Nuts included with 1.325", 1.450" & 1.575"
• 48 piece packages
drive
rear
suspension
front
suspension
600 CARBIDE
TIP & SHANK
4 LENGTHS
1.075”
1.325”
1.450”
1.575”
48 PCS
GMPP1075-48
GMPP1325-48
GMPP1450-48
GMPP1575-48
fuel &
intake
rewind
GRAND MASTER PROTM CROSS COUNTRY RACING STUD
SIZE
1.075” X 5/16” 1.325” X 5/16” 1.450” X 5/16” 1.575” X 5/16” controls
traction
products
mini sleds
LARGER 1.200” HEAD
FOR SINGLE PLY TRACK
126.95
141.95
141.95
141.95
Woody's Snowmobile Studs and Runners
Increase the Performance and Safety Level of Your Snowmobile.
Taking off, steering, and stopping your snowmobile on hard pack or icy conditions is
unpredictable when you don't have the proper traction control. So, what’s going on?
• You don't have enough studs or carbide in the runner.
• You don't have a proper balance of studs and carbide for your snowmobile.
Woody's has been showing snowmobilers how to eliminate slipping & sliding for over 40 years. You want to enjoy
the outdoors and have fun driving your snowmobile. Woody's studs and carbide wear bars provide grip on the trail.
2012 WINTER CATALOG
MOST ORDERS SHIPPED THE SAME DAY • www.autodist.com
chemicals
off-road
tools
snowblower
parts
go cart
trailer &
towing
909
TRACTION PRODUCTS
helmets &
accessories
clothing &
accessories
SNOCROSS COMPETITION STUD
TRIGGER STUD
The snowmobile manufacturers brought your a taller lug track and Woody’s
is right there with them with a stud to fit. A 60o carbide tip and 5/16” shank
from high strength alloy steel are durable enough for any track conditions
you find. This stud is available in 24 and 96 piece packages with lock nuts.
The RACE1860 is the correct length for 1.750” lug tracks that came stock
on 2006 and 2007 Ski-Doo, Polaris, and Arctic Cat snowmobiles.
Woody’s Trigger stud is the necessary ammunition for lake racers The
Trigger has a long and narrow profile providing you with unmatchable
penetration. Its 60o carbide tip, 5/16” shank and 15/16” head make it durable
enough for any lake conditions you find. Offered in 1.450” and 1.630”
lengths. The overall installed heights are 1.70” & 1.88”. The race stud is
available in packages of 48 pieces that include Woody’s aluminum Big Nuts.
When using studs of these lengths it is essential to have proper clearance
and tunnel protection. Competition use only.
STUD WITH ALN2-7000 BIG NUTS
RACE1860
1.860 5/16”
24 pcs
63.95
RACE1860B 1.860 5/16”
96 pcs 252.95
SIZE 1.450" X 5/16”
1.630" X 5/16”
gloves &
accessories
boots &
accessories
luggage
accessories
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
rewind
clutch
drive
rear
suspension
front
suspension
traction
products
mini sleds
chemicals
MEGA-BITE CARBIDE
SIZE
24 PCS
1008 PCS
.8750" X 5/16” MEG8755 43.95
MEG8755B
170.95
1.000" X 5/16” MEG1005 43.95
MEG1005B
170.95
1.075" X 5/16” MEG1075 43.95
MEG1075B
170.95
1.175" X 5/16” MEG1175 43.95
MEG1175B
170.95
1.325" X 5/16” MEG1325* 50.95
MEG1325B* 197.95
1.450” X 5/16” MEG1450* 50.95
MEG1450B* 197.95
1.575" X 5/16” MEG1575**50.95
MEG1575B** 197.95
1.740" X 5/16” MEG1740**50.95
MEG1740B** 197.95
96 PCS
144 PCS
MEG8755C 249.95
MEG1005C 249.95
MEG1075C 249.95
MEG1175C 249.95
MEG1325C* 290.95
MEG1450C* 290.95
-----
-----
MEG8755M 1618.95
MEG1005M 1618.95
MEG1075M 1618.95
MEG1175M 1618.95
MEG1325M* 1884.95
MEG1450M* 1884.95
MEG1575M** 1884.95
MEG1740M** 1884.95
* Now being packaged with ALN2-4500 big nuts
** Now being packaged with ALN2-7000 big nuts
GOLD DIGGER TRACTION MASTER
MODIFIED CARBIDE
A Gold Digger Traction Master modified with a machine point sharpened
for excellent penetration. 45o carbide.
tools
snowblower
parts
go cart
910
134.95
134.95
THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. THE 1.575" AND THE 1.740" PACKAGES HAVE THE
ALN2-7000 BIG NUTS INCLUDED. 1008 PACKS NOW CONSIST OF 10 PACKAGES OF 96 AND 2 PACKAGES OF 24 WITH A SAVINGS OF UP TO 10% OVER
THE OLD 1000 PACK. The unique design of four flat sides on the penetration portion of the tough 5/16” shank provides additional contact surface for
added acceleration, deceleration and directional control under changing trail conditions. Professional snocross racers love the enhanced controllability
the 60° carbide tipped Mega-Bite® delivers. For trail riding, the Mega-Bite® is available in lengths of .875" through 1.450" in package quantities of 24,
96, 144 and 1,008 pieces. For snocross racing, lengths of 1.575" and 1.740" are available in quantities of 24, 96 and 1,008.
off-road
trailer &
towing
48 PCS
TRIG1450-S
TRIG1630-S
48 PIECES - STUDS W/LOCK NUT
GDP117M
1.175
5/16”
119.95
GDP132M
1.325
5/16” 134.95
GDP145M
1.450
5/16”
134.95
AUTOMATIC
"CHISEL TOOTH” PUSH-THRU STUD
THE 1.325" - 1.860” PACKAGES HAVE THE ALN2-4500 BIG NUTS
INCLUDED. The tough and dependable Chisel Tooth™ Traction Master®
is a workhorse. This stud penetrates like a pointed stud but acts like a
scooper with a flat surface for traction.This stud is offered to the trail
rider in lengths of 1.075" through 1.860” with a 5/16” shank and a 1”
head in packages of 48. In addition, for competition, Woody's also offers
a lighter 7mm with a 7/8" head in lengths of 1.000" through 1.200". All are
available in packages of 48 pieces with lock nuts.
SIZE
1.000" X 7MM 48 PCS
1.060" X 7MM 48 PCS
1.200" X 7MM 48 PCS
1.075" X 5/16” 48 PCS
1.205" X 5/16” 48 PCS
1.325" X 5/16” 48 PCS
1.630” X 5/16” 48 PCS
1.860” X 5/16” 48 PCS
PART # CAP1000
CAP1060
CAP1200
CAP1075
CAP1205
CAP1325*
CAP1630-S*
CAP1860-S*
91.95
91.95
91.95
91.95
91.95
106.95
116.95
116.95
* Now being packaged with ALN2-4500 big nuts
DISTRIBUTORS
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
GOLD DIGGER CARBIDE
7mm. The finest carbide steel made with brazed construction guaranteeing the carbide not to come out and allowing field sharpening, domed washers
provide a secure mount when used in rubber tracks, and an 80 degree point maximizing penetration. Package of 24 complete with T-nuts - bulk package
with studs only. BACKING PLATES SOLD SEPARATELY. .370 thread length. Carbide. 7mm thread for added strength. Requires 1” 7mm T-Nut.
helmets &
accessories
clothing &
accessories
24 PIECES WITH T-NUTS
GDC1000
1.000”
19.50
gloves &
accessories
48 PIECES WITH T-NUTS
GDC8750-48
.875”
27.50
boots &
accessories
luggage
96 PIECES WITHOUT T-NUTS
GDC8750B
.875”
39.50
GDC1000B
1.000”
39.50
accessories
"CHISEL TOOTH” STUD
WIDE BODY CHISEL TOOTH
“For Competition Use”. Its 37% increase in surface area on the flat face,
over a standard Chisel ToothTM stud, is the key to winning drag races.
The through-hardened, alloy steel flat blade penetrates and grabs soft
or loose conditions for maximum traction. The Wide Body Chisel stud
should be used in combination with another competition stud for optimum
results. 7mm. Steel. Backing Plates Sold Separately.
body &
chassis
The most aggressive single point stud available
for ice or dirt, giving you the most positive traction
available, once the ground surface is penetrated. Can
be used with either rubber or cleated tracks. Steel.
Backing Plates Sold Separately.
engine
electrical &
ignition
controls
48 PIECES - STUD ONLY
CWB1060
1.060”
48 PIECES - STUD ONLY
CLT1060
7mm
1.060”
CLT1200
7mm
1.200”
69.50
SIX POINT STAR BOLT
fuel &
intake
48 Studs Only
48 Studs Only
70.95
70.95
Nylon / ALUMINUM Nuts
for Traction Master Studs
This is a most unique stud design, it is one of the few which provides a
beneficial combination of acceleration, braking and cornering. The steel
stud is made durable by through-hardened heat treating process. Needed
for installation is the Star Bolt and a square or round support plate.
7.95
clutch
drive
rear
suspension
NYLON LOCK NUTS - 48 PCS
NYL5010
1/4-28
8.95
NYL5000
7mm
9.55
NYL5020
5/16”
9.55
STAR BOLT - 1/4” - 20
ANB3900
24 Pieces
rewind
ALUMINUM LOCK NUTS - 48 PCS
NYL5040
5/16”
31.95
front
suspension
traction
products
mini sleds
chemicals
ALUMINUM BIG NUTS
Stud lengths of 1.325" and 1.450" are packaged with ALN2-4500 Big Nuts. The 1.575" and 1.740" studs are packaged with the taller ALN2-7000. The
aluminum Big Nut with a nylon insert provides added support to longer length studs. It is available in two sizes. Use ALN2-7000 for 1.575" studs and
longer. Use ALN2-4500 for 1.450", 1.325" studs. Packaged in quantities of 24, 96 and 1000 pieces.
off-road
tools
snowblower
parts
SIZE 5/16” FOR 1.450" OR SHORTER
5/16” FOR 1.575" OR SHORTER
7MM
24 PCS
ALN2-4500 12.95
ALN2-7000 12.95
-----
96 PCS
ALN2-4500B 45.95
ALN2-7000B 45.95
ALN5050B* 39.50
1000 PCS
ALN2-4500M
ALN2-7000M
-----
go cart
463.95
463.95
* Aluminum nut with locking washer, no nylon insert
2012 WINTER CATALOG
MOST ORDERS SHIPPED THE SAME DAY • www.autodist.com
trailer &
towing
911
TRACTION PRODUCTS
COLORED ALUMINUM SQUARE BACKING PLATES
Green • Purple • Red are
ANODIZED
Blue • Yellow • Orange •
White • Black are PAINTED
helmets &
accessories
clothing &
accessories
gloves &
accessories
boots &
accessories
luggage
accessories
COLOR
GREEN
PURPLE
RED
BLUE
YELLOW
ORANGE
Black
White
24 PCS
7MM
ASW3730 7.50
ASW3735 7.50
ASW3740 7.50
-----
-----
-----
-----
-----
96 PCS
7MM
ASW3730B 29.50
ASW3735B 29.50
ASW3740B 29.50
ASW3745B 29.50
-----
-----
-----
-----
144 PCS
24 PCS
96 PCS
144 PCS
1008 PCS
7MM
5.16”
5/16”
5/16”
5/16”
ASW3730C 39.50 ASW23780 22.95 ASW23780B 84.95 ASW23780C 127.95 ----ASW3735C 39.50 ASW23785 9.50 -----
-----
----ASW3740C 39.50 ASW23790 22.95 ASW23790B 84.95 ASW23790C 127.95 ---------
ASW23795 22.95 ASW23795B 84.95 ASW23795C 127.95 ---------
ASW23800 22.95 ASW23800B 84.95 ASW23800C 127.95 ---------
ASW23805 22.95 ASW23805B 84.95 ASW23805C 127.95 ---------
ASW23810 22.95 Asw23810B 84.95asw23810c 127.95asw23810m 650.00
-----asw23815 22.95asw23815b 84.95asw23815c 127.95asw23815m 650.00
body &
chassis
ROUND DIGGER ALUMINUM & STEEL SUPPORT PLATES
engine
The same quality material and strength of the square, aluminum support plate, just a little easy
to install-no indexing. The round aluminum support plates are available in 5/16” x 1-3/8" thread in
quantities of 24, 96, 144 and 1,008.
electrical &
ignition
controls
fuel &
intake
rewind
clutch
SIZE
24 PCS
96 PCS
144 PCS
1008 PCS
5/16” ALUM. AWA3775 15.95 AWA3775B 57.95 AWA3775C 84.95 AWA3775M 540.95
7MM ALUM. AWA3700 13.95 AWA3700B 49.95 -----
-----
front
suspension
traction
products
mini sleds
chemicals
off-road
tools
snowblower
parts
go cart
trailer &
towing
912
Give yourself an advantage with the Triangle
Digger® aluminum support plate this season.
The Triangle Digger® delivers more power
to the ground by increasing the track rotating
speed. The innovation is so
distinctive a patent is pending.
Tested by Team Woody's® and
has passed with increased
podium finishes. Available for
5/16” studs in packages of 48.
SIZE
5/16”
48 PCS AWT3775 36.95
SQUARE DIGGER ALUMINUM SUPPORT PLATES
drive
rear
suspension
TRIANGLE DIGGER
SUPPORT PLATES
Aluminum support plates are fast becoming a Woody's best seller. The only difference between the square and
round is the square aluminum must be indexed to perpendicular with the edge of the track. The square aluminum
support plates are available in sizes of 7mm x 1-1/8" and 5/16” x 1-1/4" in quantities of 24, 96, 144 and 1,008.
SIZE 24 PCS
96 PCS
144 PCS
1008 PCS
7MM ASW3725 13.95 ASW3725B 49.95 -----
-----
5/16” ASW23775 15.95 ASW23775B 57.95 ASW23775C 84.95
ASW23775M 540.95
GRAND DIGGER ROUND AND SQUARE SINGLE SUPPORT PLATES FOR SINGLE PLY TRACKS
The Grand Digger™ single support plates are available in round or square
aluminum. They are packaged in quantities of 12, 48, 84 and 504. You must
use these support plates when installing Grand Master™ studs.
STYLE
ROUND
SQUARE
12 PCS ARG3775-12 9.55
ASG3775-12 9.55
48 PCS
ARG3775-48 34.95
ASG3775-48 34.95
84 PCS
ARG3775-84 57.95
ASG3775-84 57.95
504 PCS
ARG3775-500 318.95
ASG3775-500 318.95
DOUBLE GRANDTM DIGGER ALUMINUM SUPPORT PLATES FOR SINGLE PLY TRACKS
The Double Grand™ Digger® support plate can only be used with the Grand Master stud in stud patterns on our 286S, 300S and 252S templates for
single ply tracks. The addition of a dual configuration provides additional studding options in the middle belt. The Double Grand Digger is available in
12, 48 and 250 piece packages. Patterns for single ply tracks are available under Trail Templates. TORQUE SPEC-The Grand Master stud must be
torqued to 20 ft. lbs.
PART # ADG3775
ADG3775-48
ADG3775-250
SIZE
5/16”
5/16”
5/16”
PKG QTY
12 PCS
48 PCS
250 PCS
AUTOMATIC
19.95
77.95
395.95
DISTRIBUTORS
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
DOUBLE DIGGER TM
ALUMINUM SUPPORT PLATES
NATURAL
ALUMINUM
SIZE
TM
COLOR
Woody’s introduces a new Double Digger Aluminum
Support Plate.These plates feature a dual stud mounting
configuration that will give more stud rigidity with less
weight than steel plates or two single aluminum plates.
They are available for use with 5/16” and 7mm Traction
Master Push-Thru Studs.The mounting holes are spaced
the same as Bender Stud Mate plates. The dome of the
Double Digger has been increased to take complete
advantage of Woody’s patented dished head design on
their famous Traction Master series studs.
ADD3725
7mm
12 pcs 14.95
ADD3725B
7mm
48 pcs 56.95
ADD23775
5/16”
12 pcs 14.95
ADD23775B
5/16”
48 pcs 56.95
ADD23780B
Green
5/16”
48 pcs 79.95
ADD23790B
Red
5/16”
48 pcs 79.95
ADD23795B
Blue
5/16”
48 pcs 79.95
ADD23800B
Yellow 5/16”
48 pcs 79.95
ADD23805B
Orange 5/16”
48 pcs 79.95
ADD23810B
Black
5/16”
48 pcs 79.95
ADD23815B
White
5/16”
48 pcs 79.95
This unique 7° angled design support plates
holds the stud off perpendicular from the track.
Under load the stud moves to perpendicular
enhancing the consistency of acceleration and
aiding the stud to resist going past perpendicular
in the other direction. A unique concept and it
works.Read the instructions before installing.
An awesome design taken one step
further. The Double Digger® and
the 7° angle support plate designs
have proven so effective separately,
imagine what they will do together.
Weight reduction and acceleration
assistance rolled into one product.
Read
the
instructions
before
installing.Available in 5/16” and 7mm
in quantities of 12 and 48.
12 PCS
ADA3725 17.50
ADA3775 19.95
PCS
ANGLED DIGGER ALUMINUM SUPPORT PLATES
ANGLED DOUBLE DIGGER
ALUMINUM SUPPORT PLATES
SIZE
7MM
5/16”
COLOR
helmets &
accessories
clothing &
accessories
gloves &
accessories
boots &
accessories
luggage
accessories
body &
chassis
engine
electrical &
ignition
controls
SIZE
7MM
5/16”
48 PCS
ADA3725B 67.50
ADA3775B 74.95
Single Hole Bender Plates
Aluminum. New reinforced single hole bender plate is angled at 45
degrees to lay against angled face of rubber lug. Plate holds stud or pick
rigid and provides maximum traction. 7mm.
24 PCS
ANG3725 17.95
ANG3775 18.95
96 PCS
144 PCS
ANG3725B 66.95 ANG3725C 99.95
ANG3775B 72.95 ANG3775C 106.95
Round Digger® Aluminum & Colored
Support Plate
fuel &
intake
rewind
clutch
drive
• Your preference and imagination is all
that is needed to individualize your sled
with colored aluminum support plates.
• Customize with 5/16” x 1-3/8" threaded
in green, red, blue, yellow, black, or
orange. Stand out in the crowd!
rear
suspension
front
suspension
traction
products
12 PCS
AWL2700
11.50
- Aluminum -
48 PCS
AWL2700B
36.50
NOTE: Aluminum support plates are lighter
but wear faster than steel.
Dual Hole Bender Plates
Aluminum or Steel. Full 2" wide plate with a 45 degree angle lays flat
against the rubber lugs on the track. Holds stud rigid for maximum traction.
7mm. Aluminum plates are used for competition. Steel plates are used
for trail riding.
12 Pieces
AWL3750 14.50
AWL3800
3.50
- Aluminum - Steel -
48 Pieces
AWL3750B
AWL3800B
59.50
9.50
mini sleds
BLACK
AWA3810
chemicals
HOLE DIAMETER
PCS
5/16”
48
45.95
GREEN
AWA3780
5/16”
48
45.95
RED
AWA3790
5/16”
48
45.95
snowblower
parts
YELLOW
AWA3800
5/16”
48
45.95
go cart
ORANGE
AWA3805
5/16”
48
45.95
trailer &
towing
PINK
AWA3820
5/16”
48
45.95
2012 WINTER CATALOG
MOST ORDERS SHIPPED THE SAME DAY • www.autodist.com
off-road
tools
913
TRACTION PRODUCTS
Track tension Tool
Woody's Accessories
helmets &
accessories
Monitor your track, by determining your track deflection, wth this new
product offering from Woody’s. Add this tool to your regular maintenance
schedule for optimum perfomance. Follow the deflection limit
recommendations from the snowmobile or track manufacturer. Never
guess again!
clothing &
accessories
gloves &
accessories
boots &
accessories
luggage
accessories
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
AGW4000
AGW4500
AGW4100
1/2" x 6" Wheel
Black Wheel 1/4” x 4 1/2”
(for sharpening carbide runners)
1" x 6" Green Wheel
30.95
7.95
38.95
WD035
40.95
SHALLOW SOCKET TOOL
triangle support plate indexing Tool
Woody’s has developed a unique shallow socket for installing studs that
provides the torque to tighten without touching the surface of the support
plate. Works ideal with colored support plates. The 5/16” socket is deep
enough to install studs up to 1.575” length. Won’t scratch the backing
plates.
Align your Triangle Digger support plates by using this specialized indexing
Tool. To be used with a 3/8” ratchet. Can be used for both 5/16” and 7mm
Triangle Digger support plates.
rewind
clutch
drive
rear
suspension
front
suspension
traction
products
mini sleds
SCW4500 7mm
SCW4505 5/16”
17.50
21.95
WD8748
STUD SHARPENING TOOL
universal track hole drill
Perfect every time makes studding easy. The hollow drill for 7mm or 5/16”
studs makes a precise opening for installing studs. No mistakes. 7mm
T-nut studs and 5/16” push-through studs use 7mm drill.
9.50
Keep your steel studs sharp with this unique tool. Easy to use at home
or on the track with just a few twists.
chemicals
off-road
tools
snowblower
parts
go cart
trailer &
towing
TC7
914
7mm & 5/16”
AUTOMATIC
11.95
DISTRIBUTORS
WD076
600 Angle
59.50
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
loctite
3/8” HEX BIT SOCKET
Loctite® Threadlocker Green 290™ is designed for the locking and
sealing of threaded fasteners. Due to it’s low viscosity and capillary
action, the product wicks between engaged threads and eliminates the
need to disassemble prior to application. Loctite® Threadlocker Green
290™ cures when confined in the absence of air between close fitting
metal surfaces. It prevents loosening from shock and vibration and
leakage from shock and vibration and protects threads from rust and
corrosion. The product can also be used to fill porosity in welds, casting
and powder metal parts. Localized heating and hand tools are needed
for disassembly.
Here is a 3/8” hex bit socket that you can use to hold the heads of Woody’s
and Roetin push through studs.
helmets &
accessories
clothing &
accessories
gloves &
accessories
boots &
accessories
luggage
accessories
body &
chassis
LOC2900
W38876
16.95
engine
TRACK MARKER
Square support plate indexing tool
A real time saver! Attach the tool directly to a standard 3/8” ratchet:
align the support plate flush with the track lugs and then tighten the
nut. Aligning the support plates can contribute to track longevity and
your safety. The indexing tool is available for both 7mm and 5.16 square
support plates.
2.95
electrical &
ignition
Excellent tool for marking stud patterns on your track. Choose your
pattern, place the template over the track and mark the track in the center
of the appropriate holes with a white dot. You can review the entire stud
pattern on your track before drilling, eliminating stud placement errors.
controls
fuel &
intake
rewind
clutch
drive
rear
suspension
WD047
WD045
7mm
5/16”
7.50
19.95
WD040
traction
products
stud hex tool
SPI track drill/cutter
Perfect every time makes studding easy. The hollow drill for 7mm or
5/16” studs makes a precise opening for installing studs. No mistakes.
7mm T-nut studs and 5/16” push-through studs use 7mm drill.
front
suspension
7.95
YOU ALWAYS NEED TO HAVE THE RIGHT TOOL FOR THE JOB!
A great tool for installing studs because they need to be really tight and
you are working in close quarters. The aluminum handle will rest in the
palm of your hand so you can apply the pressure needed to keep the
stud from rotating as you torque the nut. Woody’s ® Stud Hex Tool will
make installing studs easier each step of the way. Each tool comes with
two hex bits. You can also buy a replacement package of two hex bits for
your Stud Hex Tool.
mini sleds
chemicals
off-road
tools
snowblower
parts
go cart
trailer &
towing
62-04003
5/16”
9.95
SHT-1 SHI-2
Stud Hex Tool
Stud Hex Tool Repl. Inserts (pkg. of 2)
2012 WINTER CATALOG
MOST ORDERS SHIPPED THE SAME DAY • www.autodist.com
25.95
5.95
915
TRACTION PRODUCTS
grippertm for groomers
helmets &
accessories
clothing &
accessories
gloves &
accessories
boots &
accessories
luggage
accessories
body &
chassis
engine
• Woody's Gripper Carbide Stud for Groomer
Tracks and Tires
• The Gripper carbide stud will help you drive your goomer up and down icy
hills, around icy corners and stop slipping on uneven trail terrain
• Available in two sizes: 1¼" for Tractor Tires and 1½" for Groomer Tracks
• Solid brazed carbide tip
• 5/16” self- tapping high grade steel shank
• One person installation - two tools: ratchet & 7/16" socket
• Environmentally friendly - flat carbide tip: the weight of the groomer keeps
the stud in contact with the hard-packed snow or ice. The Gripper doesn't dig
into the trail, it Grips.
• Budget friendly - reduces wear and tear on the side wall of your tires.
Eliminates the need for heavy, hard-to-install, combersome chains.
• Driver friendly - Tight trails, ravines, icy hill and corners. Saves time because
you maintain your speed no matter what terrain you have to groom.
Hornets
electrical &
ignition
controls
fuel &
intake
24 Studs w/lock Nuts
5/16” Shank
HNT1000
1.000”
29.50
HNT1080
1.080”
29.50
HNT1640
1.640”
39.50
rewind
rear
suspension
5/16” x 1.250” 5/16” x 1.250” 5/16” x 1.500”
5/16” x 1.500” 100 pcs
250 pcs
100 pcs
250 pcs
151.00
377.50
151.00
377.50
Stinging traction
96 Studs w/Lock Nuts
5/16” Shank
HNT1080B
1.080”
99.50
HNT1520B
1.520”
214.50
1.640”
159.50
HNT1640B
Narrow neck and rimless
point for superior penetration
144 Studs w/Lock Nuts
5/16” Shank
HNT1000g
1.000”
169.50
HNT1080g
1.080”
169.50
Heavy duty 5/16” shank for superior strength
No-Rust “Platinum-Tone” Finish
700 point
Better wear then 600
Better penetration then 820
Large, thin head for superior rigidity and flush mounting
SKorpion STUD
clutch
drive
Guaranteed not to break!
GRIP1250-100
GRIP1250-250
GRIP1500-100
GRIP1500-250
Skorpion studs are extreme traction. Patented multifaceted arrowhead
tip is sharp in all directions. These studs are so aggressive they should
not be used alone or in configuration with less than 144 studs. We
recommend 24 or 48 KNT studs on the inside with HNT Hornet studs on
the outside for optimum performance.
THRUSTERS
•
•
•
•
Maximum straight line traction for grass and snow drags
Patented triple-edge point for one direction bite
4 degree chisel angle provides optimum traction in grass and snow
50% smaller cross section allows easier and deeper penetration
front
suspension
traction
products
mini sleds
STUD AND LOCK NUT
KNT1180
5/16” x 1.180” KNT1180B 5/16” x 1.180” KNT1340
5/16” x 1.340”
KNT1340B 5/16” x 1.340” chemicals
off-road
tools
24 pcs
96 pcs
24 pcs
96 pcs
57.50
229.50
59.50
229.50
TNT1180B 1.180” 129.50 96 pcs
Aluminum Washers
DOUBLE POWER PLATES
•
•
•
•
Hybrid square/round shape provides extra stud support
Thicker aluminum for added strength
Extra rigidity works well with studs 1.340 and up
Double plates allow greater concentration of studs
snowblower
parts
•
•
•
•
•
5/16” Hole
Square
Our aluminum washers will reduce your traction weight
These aluminum washers are of the highest quality aluminum
The domed design adds strength and makes it possible to tighten them
up more than the flat style being sold by our competitors
• The top is flat for better contact with the stud
• “Stamped”
go cart
trailer &
towing
PALD24
916
19.50
AUTOMATIC
24 pcs
SAG24
SAG96
DISTRIBUTORS
Square 5/16”
Square 5/16”
9.50
37.50
24 pcs
96 pcs
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
“ORIGINAL” Gold Screws
Holiday Super Trax ICE Racing Studs
HOLIDAY
These ice screws are the best screws on
the market for ATV and dirt bike tires.
•
•
•
•
helmets &
accessories
Traction on ice for motorcycles and ATVs
AMA / CMA approved
Made in USA
SOLD 250 PER PACKAGE
clothing &
accessories
1/4” hex
gloves &
accessories
boots &
accessories
luggage
HRS500M
HRS625M
HRS750L
HRS100L
HRS125L
HRS150L
1/2”
5/8”
3/4”
1”
1-1/4”
1-1/2”
1000 pkg
1000 pkg
500 pkg
500 pkg
500 pkg
500 pkg
94.95
95.95
59.95
66.95
95.95
99.95
accessories
OGS12
OGS34
OGS100
22.85
26.75
27.55
1/2”
3/4”
1”
ALUMINUM PLATE WITH 1/4" HoLE
CARBIDE RUNNERS
• Pre-drilled aluminum plate
• 1/8" thick for maximum allowable stud
height on any track (3/4" x 1-1/4")
Fits all Yamaha models 75-80/76-78 (Exc. Spitfire)
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
rewind
clutch
drive
rear
suspension
KKS1
20 plates
1.00
505-703
Ultra Lites
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3-3/4”/90°
55.55
Heavy Duty Ultra Lites
A unique one piece design
Self tapping
1/6 the weight of steel
1/3 the weight of aluminum
Made from a special nylon composite for
superior strength and less weight
Take off pounds with space age ultra lites
Fits all push-thru studs
2 sizes
7mm & 5/16”
Strong
Durable
Colorful
Long lasting
24 piece package
•
•
•
•
For 1.15 and longer studs
For the aggressive rider who uses longer studs
7mm
24 piece package
front
suspension
traction
products
mini sleds
chemicals
off-road
tools
snowblower
parts
go cart
670-20085
670-20086
670-20092
White
Purple
Green
1.75
1.75
1.75
7mm
7mm
7mm
trailer &
towing
670-40088
Plum
1.75
2012 WINTER CATALOG
MOST ORDERS SHIPPED THE SAME DAY • www.autodist.com
917
TRACTION PRODUCTS
STUD BOY “POWER POINT+ PLUS” STUD
Stud Boy " Super Lite" Snowmobile
Stud Backer Series
helmets &
accessories
clothing &
accessories
gloves &
accessories
boots &
accessories
luggage
accessories
body &
chassis
engine
5/16” Lightweight durable design
electrical &
ignition
controls
fuel &
intake
rewind
“STUD BOY”® announces our new “Power Point +PLUS” Stud. This new
Power Point Carbide Push-Through Stud is designed for new Ski-Doo
XP sleds, as well as the new Camoplast Single Ply Tracks. It features
60º carbide tip for aggressive penetration, and chamfered head design
to reduce vibration and idler wheel wear. Available in 1.080”, 1.187”,
and 1.375” lengths. Use with new “Power Plate +PLUS” Backer Plates
for all three (3) available lengths. (Power Tower Lock-Nut recommended
for 1.375”)
clutch
drive
1.187” stud for track
lug heights of 1.125” - 1.250”
rear
suspension
front
suspension
96 Studs w/Lock Nuts
SB2436P3
1.187” 219.99
traction
products
• “STUD BOY”® announces the new “Super-Lite” backer plate line-up!
The “Super-Lite” backer is designed for the rider who is looking for
light-weight stud support and vibrant colors. These backers are made
from new engineered polymers that are lighter than aluminum, while
maintaining excellent strength.
• The “Super-Lite +PLUS” Single Backer is a larger 1.450” square
backer to be used on all tracks (including Single Ply) with any of our
5/16” carbide studs.
HOLE DIAMETER
PCS
BLACK
2462-P11
2462-P31
5/16”
5/16”
24
96
14.99
59.99
GREEN
2462-P13
2462-P33
5/16”
5/16”
24
96
14.99
59.99
ORANGE
2462-P15
2462-P35
5/16”
5/16”
24
96
14.99
59.99
RED
2462-P16
2462-P36
5/16”
5/16”
24
96
14.99
59.99
YELLOW
2462-P14
2462-P34
5/16”
5/16”
24
96
14.99
59.99
STUD BOY POWER
TOWER LOCK-NUTS WITH NYLON INSERTS
mini sleds
chemicals
* 5/16” -24 threads • 6061 - T6 aluminum for greater strength and support
• .500” tall to be used with 1.080” and 1.187” studs • .750” tall to be used
with 1.375” and longer studs • By increasing the shank size this product
offers lightweight stud strength. Use the power tower lock nuts to keep
these studs from bending.
off-road
tools
snowblower
parts
.500” (1/2”)
SB2438P1
SB2438P3
24
96
11.99
47.99
.750” (3/4”)
SB2434P1
SB2434P8
SB2434P6
24
84
144
11.99
36.99
71.99
go cart
trailer &
towing
918
AUTOMATIC
DISTRIBUTORS
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
UNIVERSAL TUNNEL WEAR STRIPS
REFER TO PICTURES BELOW FOR YOUR EXACT REPLACEMENT
MODEL/
PART #
OEM #
• All tunnel wear strips are sold each and designed to protect your heat
exchanger and tunnel when using studs
• To secure tunnel strips when necessary use our rivet #23100 (5/32 x 3/8)
COLOR DIMENSIONS
RIVET QTY. RIVETS
REQ. PER PAIR
APPLICATION
helmets &
accessories
clothing &
accessories
ARCTIC CAT
KX04201 18.99 0106-223
Black
46 1/2” L X 1-1/8” W X 1/2” H Most Models 1970-92
23100 16
550-001 16.45 0106-223
White
52” L X 1 1/8” W X 3/4” H
Most Models 1970-92
23100 12
KX041993 17.99 ----Black
48” L X 1” W X 3/4” H
Most Models 1994-00
23100 10
Note: Both have 11 holes pre-punched same as A/C OEM. They may be used as a universal and can be modified to the different length tunnels.
gloves &
accessories
boots &
accessories
POLARIS
KX041991 18.99 5510130
Black
52” L X 1” W X 3/4” H
KX041993 17.99 5510130
Black
48” L x 1” W x 3/4” H
550-002 17.05 5510130
White
52” L X 1” H
555-002* 19.95 5510130
White
52”L X 1” H
Note: All above catalog numbers are drilled like Polaris OEM pattern.
550-117 12.05 Universal
Black
61” L X 1-1/8” W X 3/4” H
All Indy Models
All High Performance Models 94-00
All Indy Models
All Indy Models
23102
23100
23102
23102
12
12
10
10
All Indys
23102 10
luggage
accessories
body &
chassis
SKI DOO
KX041992 13.99 ----Black
48” L X 1/2” W X 1” H
KX041997 14.99 517.2381
Black
44 1/4” L X 1/2” W X 3/4” H
550-003 16.00 517.2381
White
50” L X 1/2” W X 3/4” H
555-003*
9.95 517.2381
White
50” L X 1/2” W X 3/4” H
550-004 16.00 ----White
50” L X 1/2” W X 1” H
555-004* 12.95 ----White 50” L X 1/2” W X 1” H
555-005 18.95 ----Black 57.50” L X 1” W X 1” H
Note: All above catalog numbers have “T” slot profile
Replace OEM style for all Models L/C 94-04
Fits Newer L/C Models 1997-01
Fits Newer L/C Models
Fits Newer L/C Models
Replace OEM style for All Models
Replace OEM style for All Models
Replace New style Models
T-Rail
T-Rail
T-Rail
T-Rail
T-Rail
T-Rail
T-Rail
engine
electrical &
ignition
controls
YAMAHA
KX041993 17.99 SMA-8CV-92900 Black
550-006 16.00 SMA-8CV-92900 White
KX041991 18.99 -----Black
48” L X 3/4” H
48” L X 1” H
52” L X 1” W X 3/4” H
All High Performance Models 94-00
V-MAX500/700, XTC, V-MAX 600/700 SX
All High Performance Models
fuel &
intake
23100 12
23102 --23102 12
rewind
*These are Garland Manufacturing tunnel wear strips.
clutch
All Tunnel Wear Strips are Made of U.H.M.W. for a Longer and More Durable Life.
drive
550-001
16.45
550-002
555-002
7.05
1
19.95
550-003
555-003
16.00
9.95
550-004
555-004
16.00
12.95
rear
suspension
550-006
16.00
KX04201
18.99
KX041991
18.99
front
suspension
traction
products
photo not available
mini sleds
KX041992
13.99
KX041993
17.99 KX041997
14.99 555-005
18.95
Yamaha Front Cooler Guard
•
•
•
•
OEM #5MA-8CR32-12-01
1997-2002 V-Max, Mountain Max, SX and 1998 SRX
Manufactured from Aluminum
Includes Hardware
Yamaha Rear Heat Exchange
Protector Kit
Manufactured of 100% aluminum to keep weight to a minimum while
offering protection from a studded track. Fits all Exciters/SX, and 94-96
V-Max 500/600 (exc XT). 92-96 V-Max 4’s
chemicals
off-road
tools
snowblower
parts
go cart
trailer &
towing
MA1201
53.95 pr
MA6117
29.50 pr
2012 WINTER CATALOG
MOST ORDERS SHIPPED THE SAME DAY • www.autodist.com
919
TRACTION PRODUCTS
universal Template
helmets &
accessories
clothing &
accessories
gloves &
accessories
boots &
accessories
WD064
WD066
Standard
Polycarbonate
13.95
27.95
• 3 Templates in One!
• Combines our Trail, Double Digger and Performance Templates all into one which has
patterns from 48 to 192 studs with the exception of the 72 stud pattern
• 2 material standard template is heavy card stock with laminated finish. Deluxe template
is a clear Polycarbonate for many uses.
arctic cat firecat sabercat Template
WD541
13.95
luggage
accessories
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
rewind
clutch
drive
rear
suspension
front
suspension
traction
products
mini sleds
chemicals
off-road
tools
snowblower
parts
go cart
trailer &
towing
920
• FOR 2003 ARCTIC CAT FIRECAT AND SABERCAT SNOWMOBILES ONLY
• This template is made of laminated heavy card stock with patterns for 96 Single Digger®, 96
Double Digger® or a 144 stud pattern combining Single and Double Digger® support plates.
• Firecat - 96 Single Stud Pattern
• Firecat - 96 Double Stud Pattern ,The Firecat Template pattern for 96 studs uses 48 Double
Digger® Support Plates.
• Firecat - 144 Single & Double Studs in Center This Firecat Template pattern for 144 studs uses
48 Single Digger® and 48 Double Digger® Support Plates.
long track Template
WD060
22.95
• A special Long Track Template to fit track sizes 15" x 136" and 15" x 144" with an added cutaway feature to make the slots expandable to accommodate 16" wide tracks. It has multiple
options for center belt studding with or without Double Digger® support plate.
• Long Track Template, 108 Double Studs for 136" Only This Long Track Template 108 stud pattern
for 136" track only uses 54 Double Digger} support plates.
• Long Track Template, 162 Single & Double Studs for 136" Only This Long Track Template 162
stud pattern for 136" tracks only uses 54 Single Digger® and 54 Double Digger®Support
Plates.
• 198 Single Studs for 136" Only • 108 Studs for 136" and 114 for 144"
• 144 Studs for 136" and 152 for 144" • 144 Studs for 136" and 152 for 144"
• 162 Studs for 136" and 171 for 144"
arctic cat firecat / sabercat Template
WD068
16.95
• The FireCat/SaberCat Template made of 20 mil styrene will fit 13.5" x 128" and 13.5" x 144" tracks
with stud patterns for your level of riding skill. Woody's stud patterns may contain double, single or a
combination of single and double Digger® Support Plates. Each pattern description will indicate how
many of each you will need to complete the pattern.
• The 102 stud pattern for the 128" x 13.5" tracks will use 51 Double Digger® support plates. The 114
stud pattern for the 144" x 13.5" track uses 57 Double Digger® support plates.
• This FireCat/SaberCat Template has patterns for 102 and 114 Single Digger® Support Plates. The
102 stud pattern is for a 128" x 13.5" track and the 114 stud pattern for 144" x 13.5" track.
• The FireCat/SaberCat Template pattern for 153 studs for a 128" x13.5 "track will use 51 Single Digger® and 51 Double Digger® support plates. The
171 pattern for a 144" x 13.5" track will use 57 Single Digger® and 57 Double ® support plates.
• This FireCat/SaberCat Template has a 170 stud pattern for a 128" x 13.5" track that will use 102 Single Digger® and 34 Double Digger® support
plates. The 190 stud pattern for a 144" x 13.5" track will use 114 Single Digger® and 38 Double Digger® support plates.
single ply track Template for 2.52 pitch
252STEMP
16.95
• This template is for single ply tracks with a 2.52 pitch and should not be use on any other tracks. This
template will fit 13.5", 14" and 15' x 128" tracks.
• The 2.52 pitch track should only be studded with square or double Grand Digger® support plates
• This template will accommodate a 102 single stud pattern. To install more studs than 102 contact
Woody's for a stud pattern.
• 102 Stud Pattern for Single Ply 13.5", 14" & 15" x 128" tracks
• This stud pattern will fit either a 13.5", 14" or 15" x 128" single ply tracks. The 102 stud pattern will
require 102 Grand Master studs. Grand Master packages with SQUARE SUPPORT PLATES ONLY
can be used on this pitch track and this pattern.
• 153 Stud Pattern for Single Ply 13.5", 14" & 15" x 128" tracks- Single
• This stud pattern will fit either a 13.5", 14" or 15" x 128" single ply tracks. The 153 stud pattern will require 153 Grand Master[TM] studs. Grand
Master[TM] packages with SQUARE SUPPORT PLATES ONLY can be used on this pitch track and this pattern. 102 Stud Pattern for Single Ply
128" tracks -2.52-Doubles and Singles
• The252S Template pattern for 102 studs for a 128" "track will use 51Double Grand™ Digger support plates. This 2.52 pitch track cannot use round
Grand™ Digger® support plates. • 153 Stud Pattern for Single Ply 13.5",14"&15" x 128" tracks-Double & Single
• This 153 stud pattern will require 51 single and 51 double Grand™ Master support plates. The 2.52 pitch track cannot use round single Grand™
Master support plates.
AUTOMATIC
DISTRIBUTORS
CALL 1-207-942-6769
or toll free 1-800-341-1658
BEARCAT 154” single ply TEMPLATE
TRACTION PRODUCTS
BCTS TEMP
22.95
helmets &
accessories
clothing &
accessories
•
•
•
•
Woody's Template for 154" BearCat Single Ply 2.86 Pitch Tracks
The BCTS-TEMP is for 154" - 2.86 pitch single ply tracks
This template has a pattern for 108 single studs
It should not be used on any other tracks and only with Grand
Series Traction Products
BEARCAT TEMPLATE
gloves &
accessories
boots &
accessories
BEAR-TEMP
22.95
• For Bearcats with a 2.52” pitch single-ply tracks - Must use Woody’s® Grand Master® studs and
Woody’s® Grand Digger® support plates. Using any other stud or support plate on the single-ply track
could cause damage to your track. If you don’t know the pitch of the track, contact your snowmobile
dealer.
• This template will accommodate 15” x 151” & 15”, 16”, 20” x 156” (381mm x 3835.4mm & 381, 406.4,
508mm x 3962.4mm) wide tracks. At the ends of each lug slot a portion of the template is outlined in
a black dotted line. To fit a 15” (381mm) wide track leave the dotted outlined area intact.
• To fit a 16” (406.4mm) wide track remove the gray shaded area. To fit a 20” (508mm) wide track
remove the black dotted outlined area. If the gray shaded area or black dotted outlined area has been
removed, the modified template should not be used on track widths less than the modified width.
13.5", 14" or 15" x 128" Template
128-TEMP
22.95
• Woody's® new template is designed to provide studding patterns for 128" snowmobile tracks in
widths of 13.5", 14" and 15".
• Two patterns will accomodate 102 studs. One with 102 Single Digger® support plates, the other
using 51 Double Digger® support plates to develop a 102 stud pattern. A third pattern will allow
you to install 153 studs using Single and Double Digger® support plates. All patterns are for the
center belt.
• The modification needed to accomodate either the 13.5”, 14” or a 15” wide track will not change
the scratch lines.
Two Ply Template for 2.86 Pitch
286T-TEMP
22.95
84 Double for 120" and 96 Double for 137" track in Center
• This template has patterns for standard two ply tracks with a 2.86 pitch. This template will accommodate
14", 15" and 16" wide tracks in lengths of 120" or 137". Patterns for the 120" track are 84,105, 126 and
168.
• The patterns for the 137" long track are 96, 120,144 and 192. Do not use this template on Single Ply
tracks with a 2.86 pitch. Use the 286S-Temp on single ply tracks with a 2.86 pitch.
single ply track Template for 3.0 pitch
300STEMP
22.95
• This template has patterns for single ply tracks with a 3.0 pitch and should not be used on any other
tracks. This template will fit 15" x 141" tracks with patterns for 94 and 141 Grand Master ™ studs and
the larger square or round support plate that fits the 1.200" Grand Master™ head.
• This stud pattern will fit a 15" x 141" single ply track. The 94 stud pattern will require 94 Grand Master™
studs.
• This stud pattern will fit a 15" x 141" single ply track. The 141 stud pattern will require 141 Grand
Master™ studs.
single ply track Template for 2.86 pitch
286STEMP
luggage
accessories
body &
chassis
engine
electrical &
ignition
controls
fuel &
intake
rewind
clutch
drive
rear
suspension
front
suspension
traction
products
mini sleds
chemicals
22.95
• This template has patterns for single ply tracks with a 2.86 pitch and should not be used on any other
tracks. This template will fit 15" x 120 and 15" x 137" tracks. Patterns for the 15" x 120" tracks are for
84 single Grand Master™ studs and a 126 Grand Master ™ stud pattern for singles and double Grand
Digger®support plates that fits the 1.200" Grand Master™ head. The 15" x 137" tracks has patterns
for 96 single Grand Master studs and 144 Grand Master™ studs with a single and double pattern. The
2.86 pitch track can use the round and square single Grand Digger support plate. A pitch is the space
between two lugs
• 84 Stud Pattern for Single Ply 15" x 120" -2.86 This stud pattern will fit 15" x 120" single ply tracks. The
84 stud pattern will require 84 Grand Master™ studs.
• 126 Stud Pattern for Single Ply 15" x 120" -2.86-Doubles and Singles This stud pattern will fit a 15" x 120" single ply tracks. The 126 stud pattern
will require 42 Single and 42 Double Grand Master™ support plates.
• 96 Stud Pattern for Single Ply 15" x 137" -2.86 This stud pattern will fit 15" x 137" single ply tracks. The 96 stud pattern will require 96 Grand Master
™ studs.
• 144 Stud Pattern for Single Ply 15" x 137" -2.86 This stud pattern will fit a 15" x 137" single ply track. The 144 stud pattern will require 48 single
and 48 double Grand Master™ studs.
2012 WINTER CATALOG
MOST ORDERS SHIPPED THE SAME DAY • www.autodist.com
off-road
tools
snowblower
parts
go cart
trailer &
towing
921