Fire and Rescue

Fire and Rescue
Helmets and Accessories
Rely on Bullard.
Rely on Quality.
Designed with you in mind, Bullard fire helmets offer durability,
design and service. These fire helmets are built to last.
Rely on Comfort.
Made with adjustments for fitting, Bullard fire helmets are
designed for a comfortable fit and offer removable parts for easy
replacement.
Rely on Choices.
Bullard offers the most expansive line of head protection for
structural, ARFF, wildland and emergency/search and rescue in
the world.
Rely on Expertise.
Known for our enfineering and design expertise, Bullard puts
protection and comfort at the forefront of our products.
Rely on Innovation.
Leading the market in innovation since the launch of the
first fiberglass fire helmet in 1947, Bullard is also known
for introducing the first thermoplastic fire helmet, first
ratchet fire helmet and first optically correct faceshield.
Table of Contents
UST Traditional Structural Series ......................................3
FX/PX Contemporary Structural Series ............................5
LT Contemporary Structural Series ..................................7
AX AARF Series ..................................................................9
Wildfire® Wildland Series ................................................10
USRX Urban Search and Rescue Helmet ........................11
Advent® Rescue Series ....................................................11
Accessories ......................................................................13
Leather Fronts..................................................................14
Badges and Ornamentation ............................................14
1
877-BULLARD
Fire and Rescue Helmets and Accessories
UST Structural Series
PX/FX Structural Series
LT Structural Series
Traditional Thermoglas®
Lightweight, heavy duty
Low profile thermoplastic
Wildfire® Wildland Series
AX AARF Series
USRX Search and Rescue Helmet
Extreme urban search and rescue
Advent® ER and Rescue Series
Accessories
Ornamentation
Advanced protection, lightweight
Available Colors
Model
Red
White
Yellow
Black
Blue
Orange
Lime-Yellow
UST
USTM (Matte Finish)
FX/PX
LT
AX
Wildfire
USRX
Advent
www.bullard.com
2
UST Series Helmets
UST structural firefighter helmets provide classic traditional style in an
affordable, easy-to-maintain design. With an outer shell made of
Thermoglas®, the UST offers toughness and durability. Chipping and
cracking found in conventional fiberglass is virtually eliminated.
Thermoglas qualities also include the highest level of chemical
resistance and stability at extreme temperatures.
Also available in a matte finish with a textured, non-glossy look, the
USTM is the preference of the traditional firefighter.
Get the look of a leather helmet with the protection of a
NFPA 1971 certified model.
Model
USTM6R325
3
877-BULLARD
À
É
Â
11
Ã
Á
Ç
12
Å
Ä
Æ
UST Series Helmets
Standard Features
À Special Thermoglas outer shell
Á Full inner liner system
 Replaceable brass eagle or Canadian maple leaf
à Custom leather front (sold separately)
Ä 4" optically correct faceshield or ESS goggles
Å Nomex® ear cover
Æ Chinstrap with postman’s slide
Ç Sure-Lock® ratchet headband
with comfort brow pad
È Leather ratchet cover (not shown)
É Scotchlite® reflective markings
11 Stainless steel D-ring
12 Crown straps with crown pad
13 Three position ratchet height adjuster
(not shown)
Canadian maple leaf
leather front holder
NFPA 1971 Certified
www.bullard.com
4
FX/PX Series Helmets
The FX/PX Series from Bullard offers a lightweight contemporary look
with a lower profile and less restrictive, compact design than traditional
styles. FX/PX Series helmets comply with NFPA and CE requirements, as
well as advanced military fire standards.
The PX helmets have an advanced, specially formulated,
GE Ultem® thermoplastic outer shell, which makes PX the ideal fire
helmet for heavy duty. No other fire helmet has the proven
on-the-job performance or long-lasting durability of the PX.
FX composite helmets are resistant to chemical attack and stable
under high heat exposure. Featuring color pigment that is molded
directly throughout the outer shell, nicks and chips are less visible.
Model PX
with leather front
5
877-BULLARD
È
À
Ç
Á
Ã
Å
Â
É
Ä
FX/PX Series Helmets
Standard Features
À Fiberglass or Ultem® outer shell
Á Full inner liner system
 4" optically correct faceshield or ESS goggles
à Nomex® ear cover
Ä Chinstrap with postman’s slide
Å Sure-Lock® ratchet headband with comfort brow pad
Æ Leather brow pad (not shown)
Ç Scotchlite® reflective markings
È Stainless steel D-ring
É Crown straps with crown pad
11 Three position ratchet height adjuster (not shown)
NFPA 1971 Certified
EN443 Certified
www.bullard.com
6
LT Series Helmets
Bullard presents an advanced, lightweight, thermoplastic structural fire
helmet: the LT Series. The LT is the result of 20 years of Bullard
polymer technology and engineering expertise.
Beyond the compact, low profile design, the LT Series features the
innovative Quick-Attach Blade System for rapid installation and
removal of both faceshields and goggles. Simply press on or off the
faceshield or goggle in seconds, creating flexibility to choose the
right option for the right application.
The LT also offers the lightest configuration in an NFPA 1971
compliant fire helmet on the market. Experience a reduction in stress
and fatigue with thes lightweight helmet, without giving up performance.
With these performance and design strengths, the LT Series sets an industry leading
standard for structural fire helmets.
7
877-BULLARD
Model LTX
À
Á
È
Ä
Ç
Å
Â
Ã
Æ
LT Series Helmets
Standard Features
À GE Ultem® thermoplastic outer shell
Á Ribbed inner liner
 Sure-Lock® ratchet headband
à Rip-stop Nomex® ear/neck protector
Ä Four-point crown strap assembly
Å PPC 4" faceshield
Æ Nomex chinstrap
Ç Quick-Attach blade system
È Stainless steel D-ring
É Three position ratchet height adjuster
(not shown)
NFPA 1971 Certified
www.bullard.com
8
Å
À
Ä
Á
Ã
Â
Æ
AX Series ARFF Helmets
AX Series helmets are engineered specifically for the
adverse environmental conditions during proximity fire
fighting incidents that release high levels of radiant,
convective and conductive heat.
The standard AX model is based on the FX structural
fire helmet platform. When combined with an
aluminized helmet shell cover, special 3-layer
aluminized shroud and a 6" gold-coated faceshield, it
meets the proximity fire fighting protective helmet
requirements of NFPA 1971, 2007 Edition.
Standard Features
À Fiberglass outer shell
Á Full inner liner system
 6" gold-coated faceshield
à Sure-Lock® ratchet headband
with comfort brow pad
Ä Aluminized helmet cover
Å Standard aluminized 4-layer shroud
Æ Crown straps with crown pad
NFPA 1971 Certified
9
Model AX
877-BULLARD
À
Ã
Á
Å
Ä
Â
Wildfire® Series Helmets
Designed to meet the unique needs of forestry
firefighters, Wildfire® helmets offer unparalleled
protection, versatility and comfort even in the worst
wildland fires.
FH911C Series Helmets
The C Series is the traditional cap style wildland
helmet. This lightweight, low profile design offers
superior protection in all wildland fire fighting
conditions. Combined with both ear/neck and face
shrouds, FH911C helmets exceed all NFPA 1977
requirements.
Standard Features
À Heat-resistant thermoplastic outer shell
Á 6-point ESULTRA suspension
or ESRTSL (ratchet)
 Goggle clips
à Scotchlite® reflective markings
Ä Underbrim anti-glare strip
Å Leather ratchet cover (on ratchet models)
FH911H Series Helmets
Bullard H Series is a full-brim style wildland helmet.
With a 360-degree brim, the H Series creates
additional protection from sunlight, as well as airborne
debris. FH911H Series helmets meet all the
requirements of NFPA 1977.
Model FH911CR
NFPA 1977 Certified
www.bullard.com
10
À
Ç
Á
Â
Ä
Ã
Æ
Å
USRX Urban Search and Rescue Helmet
USRX rescue helmets are engineered for extreme
search and rescue conditions. Featuring a streamlined
design, USRX rescue helmets incorporate
recommendations from USAR teams and other rescue
professionals. The result is an integrated assembly of
advanced materials and quality components that
provide superior head protection, comfort and longlasting durability.
Standard Features
À GE Ultem® thermoplastic outer shell
Á Ribbed inner liner
 Quick-attach blade system
à ESS goggles
Ä Nomex® ear cover
Å Three-point chinstrap with postman’s slide
Æ Sure-Lock® ratchet headband
Ç Stainless steel D-ring
Model USRX
NFPA 1951
and 1971 certified
11
877-BULLARD
Á
À
Ã
Ä
Â
Advent® Series Rescue Helmets
The Advent® helmet offers paramedics, emergency
medical personnel, hazardous response teams, and
search and rescue a revolutionary concept in head
protection. This helmet provides top, front, side and
rear impact and penetration protection. Advent meets
and exceeds ANSI Z89.1-2003, Type II, Class E & G
requirements and is half the weight of conventional
firefighter helmets.
Standard Features
À Tough thermoplastic outer shell
Á ABS and foam core inner shell
 Flex-Gear® ratchet headband
à 8-point crown strap system
Ä 2- or 3-point chinstrap
Model A2
ANSI Z89.1-2003, Type II,
Class E & G certified
www.bullard.com
12
Accessories
Goggles
Eye Safety Systems (ESS) brand of goggles are available in a variety of designs to meet any structural, rescue and
wildland requirements for eye protection. Bullard, in conjunction with ESS, has developed and certified specific ESS
goggles for use with all Bullard helmets. These high-performance goggles provide additional eye protection options
that can address primary eye protection issues defined in NFPA 1500, OSHA Standards 29CFR and ANSI Z87.1
requirements.
Model R309
Bourke
Eyeshield
Faceshields
Available in 4 and 6-inch sizes, Bullard offers faceshields to fit any structural, ARFF and rescue application.
Bourke Eyeshields
Bourke eyeshields are available in NFPA compliant versions when purchased with Bullard ESS goggles.
Ear/Neck Protectors
Standard on many helmet models, Bullard ear/neck and face protection is offered in
Nomex® and PBI/Kevlar® outershell materials. Flame retardant facecloth and moisture
barrier options enhance the comfort and protection needed for any fire and rescue
condition.
13
877-BULLARD
Model R223
Helmet Ornamentation
Leather Fronts
Leather fronts are available in patent leather and flat-finish genuine leather. Choose
lettering that is hot-stamped or stitched in 4, 5 and 6-inch styles to fit contemporary and
traditional style helmets. Leather fronts are mounted on the UST traditional helmet to a carved, brass eagle,
including the Stars and Stripes Eagle for the 6-inch leather front.
Badges and Ornamentation
Customize your department’s head protection for increased visibility, quick on-scene accountability and promotion.
Choose from a variety of options; special customization available upon request.
Use our on-line configurator to build the leather front that meets your needs.
Visit www.bullard.com/lfc to get started.
www.bullard.com
14
Get a CUSTOM fit
12 custom settings on Bullard Fire Helmets
The EASY way to custom fit your new Bullard helmet
À Try on your fire helmet. Check the initial balance, fit and comfort by rotating your head.
Á Remove the Ear/Neck Protector and pop the gray colored
Â
Ã
Ä
U Channel away from the black inner liner (figure 1).
2 heights of post
connectors
U Channel
You will notice there are three positions on the grey
U Channel: A, B and C (figure 1). Each of those tabs will
affect the location of the ratchet by approximately 1 inch.
For a low ride: make sure the tabs are in position A.
For a high ride: simply use the quarter turn tabs on
the U Channel to position into either position B or C.
Tab positions are
changed through
quarter turn tabs
A
B
C
Figure 1
Now, you're ready to press the U Channel back on the post of the
black liner. Notice there are two heights available (Figure 1). These
affect the forward/backward/level balance of the helmet, so try them
both to see which makes for a better fit.
tab
Place it back on your head and adjust the ratchet. If this is the
desired feel, replace the Ear/Neck Protector and you’re ready to go.
Å Additional customization: Remove the front brow pad and adjust the
black post
Figure 2
U Channel bracket in the front of the helmet (figure 2) just as you did for the rear. Keep in mind
that the SCBA interfaces with your helmet in this way and most people prefer the pre-configured
setting for a high ride.
Americas:
E.D. Bullard Company
1898 Safety Way • Cynthiana, KY 41031-9303
Toll free: 877-BULLARD (285-5273)
Tel: 859-234-6616 • Fax: 859-234-8987
www.bullard.com
Europe:
Bullard GmbH
Lilienthalstrasse 12
53424 Remagen • Germany
Tel: +49-2642 999980 • Fax : +49-2642 9999829
www.bullardextrem.com
Asia-Pacific:
Bullard Asia Pacific Pte. Ltd.
LHK Building
701, Sims Drive, #04-03 • Singapore 387383
Tel: +65-6745-0556 • Fax: +65-6745-5
www.bullard.com
ISO 9001
certified
©2008 Bullard. All rights reserved.
Bullard, Advent, Firedome, Sure-Lock, Thermoglas and Wildfire are registered
trademarks of Bullard.
Nomex and Kevlar are trademarks of DuPont Company. Scotchlite is a trademark of
3M Corp. Ultem is a trademark of General Electric
8057 (0508)